dtoc: Add support for 32 or 64-bit addresses
When using 32-bit addresses dtoc works correctly. For 64-bit addresses it
does not since it ignores the #address-cells and #size-cells properties.
Update the tool to use fdt64_t as the element type for reg properties when
either the address or size is larger than one cell. Use the correct value
so that C code can obtain the information from the device tree easily.
Alos create a new type, fdt_val_t, which is defined to either fdt32_t or
fdt64_t depending on the word size of the machine. This type corresponds
to fdt_addr_t and fdt_size_t. Unfortunately we cannot just use those types
since they are defined to phys_addr_t and phys_size_t which use
'unsigned long' in the 32-bit case, rather than 'unsigned int'.
Add tests for the four combinations of address and size values (32/32,
64/64, 32/64, 64/32). Also update existing uses for rk3399 and rk3368
which now need to use the new fdt_val_t type.
Signed-off-by: Simon Glass <sjg@chromium.org>
Suggested-by: Heiko Stuebner <heiko@sntech.de>
Reported-by: Kever Yang <kever.yang@rock-chips.com>
Reviewed-by: Philipp Tomsich <philipp.tomsich@theobroma-systems.com>
Tested-by: Kever Yang <kever.yang@rock-chips.com>
diff --git a/tools/dtoc/dtoc_test_addr64_32.dts b/tools/dtoc/dtoc_test_addr64_32.dts
new file mode 100644
index 0000000..c36f6b7
--- /dev/null
+++ b/tools/dtoc/dtoc_test_addr64_32.dts
@@ -0,0 +1,33 @@
+/*
+ * Test device tree file for dtoc
+ *
+ * Copyright 2017 Google, Inc
+ *
+ * SPDX-License-Identifier: GPL-2.0+
+ */
+
+ /dts-v1/;
+
+/ {
+ #address-cells = <2>;
+ #size-cells = <1>;
+
+ test1 {
+ u-boot,dm-pre-reloc;
+ compatible = "test1";
+ reg = <0x1234 0x0 0x5678>;
+ };
+
+ test2 {
+ u-boot,dm-pre-reloc;
+ compatible = "test2";
+ reg = <0x12345678 0x90123456 0x98765432>;
+ };
+
+ test3 {
+ u-boot,dm-pre-reloc;
+ compatible = "test3";
+ reg = <0x12345678 0x90123456 0x98765432 0 2 3>;
+ };
+
+};