mpc83xx: Add support for MPC83xx PCI-E controllers
This patch adds support for MPC83xx PCI-E controllers in Root Complex
mode.
The patch is based on Tony Li and Dave Liu work[1].
Though unlike the original patch, by default we don't register PCI-E
buses for use in U-Boot, we only configure the controllers for future
use in other OSes (Linux). This is done because we don't have enough
of spare BATs to map all the PCI-E regions.
To actually use PCI-E in U-Boot, users should explicitly define
CONFIG_83XX_GENERIC_PCIE_REGISTER_HOSES symbol in the board file. And
only then U-Boot will able to access PCI-E, but at the cost of disabled
address translation.
[1] http://lists.denx.de/pipermail/u-boot/2008-January/027630.html
Signed-off-by: Tony Li <tony.li@freescale.com>
Signed-off-by: Anton Vorontsov <avorontsov@ru.mvista.com>
Acked-by: Dave Liu <daveliu@freescale.com>
Signed-off-by: Kim Phillips <kim.phillips@freescale.com>
diff --git a/include/asm-ppc/immap_83xx.h b/include/asm-ppc/immap_83xx.h
index df24a6e..77c09db 100644
--- a/include/asm-ppc/immap_83xx.h
+++ b/include/asm-ppc/immap_83xx.h
@@ -52,23 +52,28 @@
law83xx_t lblaw[4]; /* LBIU local access window */
u8 res2[0x20];
law83xx_t pcilaw[2]; /* PCI local access window */
- u8 res3[0x30];
+ u8 res3[0x10];
+ law83xx_t pcielaw[2]; /* PCI Express local access window */
+ u8 res4[0x10];
law83xx_t ddrlaw[2]; /* DDR local access window */
- u8 res4[0x50];
+ u8 res5[0x50];
u32 sgprl; /* System General Purpose Register Low */
u32 sgprh; /* System General Purpose Register High */
u32 spridr; /* System Part and Revision ID Register */
- u8 res5[0x04];
+ u8 res6[0x04];
u32 spcr; /* System Priority Configuration Register */
u32 sicrl; /* System I/O Configuration Register Low */
u32 sicrh; /* System I/O Configuration Register High */
- u8 res6[0x04];
+ u8 res7[0x04];
u32 sidcr0; /* System I/O Delay Configuration Register 0 */
u32 sidcr1; /* System I/O Delay Configuration Register 1 */
u32 ddrcdr; /* DDR Control Driver Register */
u32 ddrdsr; /* DDR Debug Status Register */
u32 obir; /* Output Buffer Impedance Register */
- u8 res7[0xCC];
+ u8 res8[0xC];
+ u32 pecr1; /* PCI Express control register 1 */
+ u32 pecr2; /* PCI Express control register 2 */
+ u8 res9[0xB8];
} sysconf83xx_t;
/*
@@ -503,8 +508,110 @@
/*
* PCI Express
*/
+struct pex_inbound_window {
+ u32 ar;
+ u32 tar;
+ u32 barl;
+ u32 barh;
+};
+
+struct pex_outbound_window {
+ u32 ar;
+ u32 bar;
+ u32 tarl;
+ u32 tarh;
+};
+
+struct pex_csb_bridge {
+ u32 pex_csb_ver;
+ u32 pex_csb_cab;
+ u32 pex_csb_ctrl;
+ u8 res0[8];
+ u32 pex_dms_dstmr;
+ u8 res1[4];
+ u32 pex_cbs_stat;
+ u8 res2[0x20];
+ u32 pex_csb_obctrl;
+ u32 pex_csb_obstat;
+ u8 res3[0x98];
+ u32 pex_csb_ibctrl;
+ u32 pex_csb_ibstat;
+ u8 res4[0xb8];
+ u32 pex_wdma_ctrl;
+ u32 pex_wdma_addr;
+ u32 pex_wdma_stat;
+ u8 res5[0x94];
+ u32 pex_rdma_ctrl;
+ u32 pex_rdma_addr;
+ u32 pex_rdma_stat;
+ u8 res6[0xd4];
+ u32 pex_ombcr;
+ u32 pex_ombdr;
+ u8 res7[0x38];
+ u32 pex_imbcr;
+ u32 pex_imbdr;
+ u8 res8[0x38];
+ u32 pex_int_enb;
+ u32 pex_int_stat;
+ u32 pex_int_apio_vec1;
+ u32 pex_int_apio_vec2;
+ u8 res9[0x10];
+ u32 pex_int_ppio_vec1;
+ u32 pex_int_ppio_vec2;
+ u32 pex_int_wdma_vec1;
+ u32 pex_int_wdma_vec2;
+ u32 pex_int_rdma_vec1;
+ u32 pex_int_rdma_vec2;
+ u32 pex_int_misc_vec;
+ u8 res10[4];
+ u32 pex_int_axi_pio_enb;
+ u32 pex_int_axi_wdma_enb;
+ u32 pex_int_axi_rdma_enb;
+ u32 pex_int_axi_misc_enb;
+ u32 pex_int_axi_pio_stat;
+ u32 pex_int_axi_wdma_stat;
+ u32 pex_int_axi_rdma_stat;
+ u32 pex_int_axi_misc_stat;
+ u8 res11[0xa0];
+ struct pex_outbound_window pex_outbound_win[4];
+ u8 res12[0x100];
+ u32 pex_epiwtar0;
+ u32 pex_epiwtar1;
+ u32 pex_epiwtar2;
+ u32 pex_epiwtar3;
+ u8 res13[0x70];
+ struct pex_inbound_window pex_inbound_win[4];
+};
+
typedef struct pex83xx {
- u8 fixme[0x1000];
+ u8 pex_cfg_header[0x404];
+ u32 pex_ltssm_stat;
+ u8 res0[0x30];
+ u32 pex_ack_replay_timeout;
+ u8 res1[4];
+ u32 pex_gclk_ratio;
+ u8 res2[0xc];
+ u32 pex_pm_timer;
+ u32 pex_pme_timeout;
+ u8 res3[4];
+ u32 pex_aspm_req_timer;
+ u8 res4[0x18];
+ u32 pex_ssvid_update;
+ u8 res5[0x34];
+ u32 pex_cfg_ready;
+ u8 res6[0x24];
+ u32 pex_bar_sizel;
+ u8 res7[4];
+ u32 pex_bar_sel;
+ u8 res8[0x20];
+ u32 pex_bar_pf;
+ u8 res9[0x88];
+ u32 pex_pme_to_ack_tor;
+ u8 res10[0xc];
+ u32 pex_ss_intr_mask;
+ u8 res11[0x25c];
+ struct pex_csb_bridge bridge;
+ u8 res12[0x160];
} pex83xx_t;
/*