diff --git a/arch/arm/dts/Makefile b/arch/arm/dts/Makefile
index c131149..a6f947c 100644
--- a/arch/arm/dts/Makefile
+++ b/arch/arm/dts/Makefile
@@ -358,6 +358,9 @@
 dtb-$(CONFIG_TARGET_SAMA5D3_XPLAINED) += \
 	at91-sama5d3_xplained.dtb
 
+dtb-$(CONFIG_TARGET_SAMA5D4_XPLAINED) += \
+	at91-sama5d4_xplained.dtb
+
 dtb-$(CONFIG_ARCH_BCM283X) += \
 	bcm2835-rpi-a-plus.dtb \
 	bcm2835-rpi-a.dtb \
diff --git a/arch/arm/dts/at91-sama5d4_xplained.dts b/arch/arm/dts/at91-sama5d4_xplained.dts
new file mode 100644
index 0000000..ca6aff2
--- /dev/null
+++ b/arch/arm/dts/at91-sama5d4_xplained.dts
@@ -0,0 +1,286 @@
+/*
+ * at91-sama5d4_xplained.dts - Device Tree file for SAMA5D4 Xplained board
+ *
+ *  Copyright (C) 2015 Atmel,
+ *                2015 Josh Wu <josh.wu@atmel.com>
+ *
+ * This file is dual-licensed: you can use it either under the terms
+ * of the GPL or the X11 license, at your option. Note that this dual
+ * licensing only applies to this file, and not this project as a
+ * whole.
+ *
+ *  a) This file is free software; you can redistribute it and/or
+ *     modify it under the terms of the GNU General Public License as
+ *     published by the Free Software Foundation; either version 2 of the
+ *     License, or (at your option) any later version.
+ *
+ *     This file is distributed in the hope that it will be useful,
+ *     but WITHOUT ANY WARRANTY; without even the implied warranty of
+ *     MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ *     GNU General Public License for more details.
+ *
+ * Or, alternatively,
+ *
+ *  b) Permission is hereby granted, free of charge, to any person
+ *     obtaining a copy of this software and associated documentation
+ *     files (the "Software"), to deal in the Software without
+ *     restriction, including without limitation the rights to use,
+ *     copy, modify, merge, publish, distribute, sublicense, and/or
+ *     sell copies of the Software, and to permit persons to whom the
+ *     Software is furnished to do so, subject to the following
+ *     conditions:
+ *
+ *     The above copyright notice and this permission notice shall be
+ *     included in all copies or substantial portions of the Software.
+ *
+ *     THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND,
+ *     EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES
+ *     OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
+ *     NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT
+ *     HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY,
+ *     WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING
+ *     FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR
+ *     OTHER DEALINGS IN THE SOFTWARE.
+ */
+/dts-v1/;
+#include "sama5d4.dtsi"
+
+/ {
+	model = "Atmel SAMA5D4 Xplained";
+	compatible = "atmel,sama5d4-xplained", "atmel,sama5d4", "atmel,sama5";
+
+	aliases {
+		spi0 = &spi0;
+	};
+
+	chosen {
+		u-boot,dm-pre-reloc;
+		stdout-path = &usart3;
+	};
+
+	memory {
+		reg = <0x20000000 0x20000000>;
+	};
+
+	clocks {
+		slow_xtal {
+			clock-frequency = <32768>;
+		};
+
+		main_xtal {
+			clock-frequency = <12000000>;
+		};
+	};
+
+	ahb {
+		apb {
+			spi0: spi@f8010000 {
+				u-boot,dm-pre-reloc;
+				cs-gpios = <&pioC 3 0>, <0>, <0>, <0>;
+				status = "okay";
+				spi_flash@0 {
+					u-boot,dm-pre-reloc;
+					compatible = "spi-flash";
+					spi-max-frequency = <50000000>;
+					reg = <0>;
+				};
+			};
+
+			i2c0: i2c@f8014000 {
+				status = "okay";
+			};
+
+			macb0: ethernet@f8020000 {
+				phy-mode = "rmii";
+				status = "okay";
+				pinctrl-names = "default";
+				pinctrl-0 = <&pinctrl_macb0_rmii &pinctrl_macb0_phy_irq>;
+
+				phy0: ethernet-phy@1 {
+					interrupt-parent = <&pioE>;
+					interrupts = <1 IRQ_TYPE_LEVEL_LOW>;
+					reg = <1>;
+				};
+			};
+
+			mmc1: mmc@fc000000 {
+				u-boot,dm-pre-reloc;
+				pinctrl-names = "default";
+				pinctrl-0 = <&pinctrl_mmc1_clk_cmd_dat0 &pinctrl_mmc1_dat1_3 &pinctrl_mmc1_cd>;
+				vmmc-supply = <&vcc_mmc1_reg>;
+				vqmmc-supply = <&vcc_3v3_reg>;
+				status = "okay";
+				slot@0 {
+					reg = <0>;
+					bus-width = <4>;
+					cd-gpios = <&pioE 3 0>;
+				};
+			};
+
+			usart3: serial@fc00c000 {
+				u-boot,dm-pre-reloc;
+				status = "okay";
+			};
+
+			usart4: serial@fc010000 {
+				status = "okay";
+			};
+
+			spi1: spi@fc018000 {
+				cs-gpios = <&pioB 21 0>;
+				status = "okay";
+			};
+
+			adc0: adc@fc034000 {
+				pinctrl-names = "default";
+				pinctrl-0 = <
+					/* external trigger conflicts with USBA_VBUS */
+					&pinctrl_adc0_ad0
+					&pinctrl_adc0_ad1
+					&pinctrl_adc0_ad2
+					&pinctrl_adc0_ad3
+					&pinctrl_adc0_ad4
+					>;
+				atmel,adc-vref = <3300>;
+				status = "okay";
+			};
+
+			watchdog@fc068640 {
+				status = "okay";
+			};
+
+			pinctrl@fc06a000 {
+				board {
+					u-boot,dm-pre-reloc;
+					pinctrl_mmc1_cd: mmc1_cd {
+						u-boot,dm-pre-reloc;
+						atmel,pins =
+							<AT91_PIOE 3 AT91_PERIPH_GPIO AT91_PINCTRL_PULL_UP_DEGLITCH>;
+					};
+					pinctrl_usba_vbus: usba_vbus {
+						atmel,pins =
+							<AT91_PIOE 31 AT91_PERIPH_GPIO AT91_PINCTRL_DEGLITCH>;
+					};
+					pinctrl_key_gpio: key_gpio_0 {
+						atmel,pins =
+							<AT91_PIOE 8 AT91_PERIPH_GPIO AT91_PINCTRL_PULL_UP_DEGLITCH>;
+					};
+					pinctrl_macb0_phy_irq: macb0_phy_irq_0 {
+						atmel,pins =
+							<AT91_PIOE 1 AT91_PERIPH_GPIO AT91_PINCTRL_PULL_UP_DEGLITCH>;
+					};
+				};
+			};
+		};
+
+		usb0: gadget@00400000 {
+			atmel,vbus-gpio = <&pioE 31 GPIO_ACTIVE_HIGH>;
+			pinctrl-names = "default";
+			pinctrl-0 = <&pinctrl_usba_vbus>;
+			status = "okay";
+		};
+
+		usb1: ohci@00500000 {
+			num-ports = <3>;
+			atmel,vbus-gpio = <0
+					   &pioE 11 GPIO_ACTIVE_HIGH
+					   &pioE 14 GPIO_ACTIVE_HIGH
+					  >;
+			status = "okay";
+		};
+
+		usb2: ehci@00600000 {
+			status = "okay";
+		};
+
+		nand0: nand@80000000 {
+			nand-bus-width = <8>;
+			nand-ecc-mode = "hw";
+			nand-on-flash-bbt;
+			atmel,has-pmecc;
+			status = "okay";
+
+			at91bootstrap@0 {
+				label = "at91bootstrap";
+				reg = <0x0 0x40000>;
+			};
+
+			bootloader@40000 {
+				label = "bootloader";
+				reg = <0x40000 0x80000>;
+			};
+
+			bootloaderenv@c0000 {
+				label = "bootloader env";
+				reg = <0xc0000 0xc0000>;
+			};
+
+			dtb@180000 {
+				label = "device tree";
+				reg = <0x180000 0x80000>;
+			};
+
+			kernel@200000 {
+				label = "kernel";
+				reg = <0x200000 0x600000>;
+			};
+
+			rootfs@800000 {
+				label = "rootfs";
+				reg = <0x800000 0x0f800000>;
+			};
+		};
+	};
+
+	gpio_keys {
+		compatible = "gpio-keys";
+
+		pinctrl-names = "default";
+		pinctrl-0 = <&pinctrl_key_gpio>;
+
+		pb_user1 {
+			label = "pb_user1";
+			gpios = <&pioE 8 GPIO_ACTIVE_HIGH>;
+			linux,code = <0x100>;
+			wakeup-source;
+		};
+	};
+
+	leds {
+		compatible = "gpio-leds";
+		status = "okay";
+
+		d8 {
+			label = "d8";
+			gpios = <&pioD 30 GPIO_ACTIVE_HIGH>;
+			default-state = "on";
+		};
+
+		d10 {
+			label = "d10";
+			gpios = <&pioE 15 GPIO_ACTIVE_LOW>;
+			linux,default-trigger = "heartbeat";
+		};
+	};
+
+	vcc_3v3_reg: fixedregulator@0 {
+		compatible = "regulator-fixed";
+		regulator-name = "VCC 3V3";
+		regulator-min-microvolt = <3300000>;
+		regulator-max-microvolt = <3300000>;
+		regulator-boot-on;
+		regulator-always-on;
+		reg = <0 1>;
+	};
+
+	vcc_mmc1_reg: fixedregulator@1 {
+		compatible = "regulator-fixed";
+		gpio = <&pioE 4 GPIO_ACTIVE_LOW>;
+		regulator-name = "VDD MCI1";
+		regulator-min-microvolt = <3300000>;
+		regulator-max-microvolt = <3300000>;
+		vin-supply = <&vcc_3v3_reg>;
+		regulator-always-on;
+		reg = <1 1>;
+	};
+};
diff --git a/arch/arm/dts/sama5d4.dtsi b/arch/arm/dts/sama5d4.dtsi
new file mode 100644
index 0000000..c6512ae
--- /dev/null
+++ b/arch/arm/dts/sama5d4.dtsi
@@ -0,0 +1,1935 @@
+/*
+ * sama5d4.dtsi - Device Tree Include file for SAMA5D4 family SoC
+ *
+ *  Copyright (C) 2014 Atmel,
+ *                2014 Nicolas Ferre <nicolas.ferre@atmel.com>
+ *
+ * This file is dual-licensed: you can use it either under the terms
+ * of the GPL or the X11 license, at your option. Note that this dual
+ * licensing only applies to this file, and not this project as a
+ * whole.
+ *
+ *  a) This file is free software; you can redistribute it and/or
+ *     modify it under the terms of the GNU General Public License as
+ *     published by the Free Software Foundation; either version 2 of the
+ *     License, or (at your option) any later version.
+ *
+ *     This file is distributed in the hope that it will be useful,
+ *     but WITHOUT ANY WARRANTY; without even the implied warranty of
+ *     MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ *     GNU General Public License for more details.
+ *
+ * Or, alternatively,
+ *
+ *  b) Permission is hereby granted, free of charge, to any person
+ *     obtaining a copy of this software and associated documentation
+ *     files (the "Software"), to deal in the Software without
+ *     restriction, including without limitation the rights to use,
+ *     copy, modify, merge, publish, distribute, sublicense, and/or
+ *     sell copies of the Software, and to permit persons to whom the
+ *     Software is furnished to do so, subject to the following
+ *     conditions:
+ *
+ *     The above copyright notice and this permission notice shall be
+ *     included in all copies or substantial portions of the Software.
+ *
+ *     THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND,
+ *     EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES
+ *     OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
+ *     NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT
+ *     HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY,
+ *     WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING
+ *     FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR
+ *     OTHER DEALINGS IN THE SOFTWARE.
+ */
+
+#include "skeleton.dtsi"
+#include <dt-bindings/clock/at91.h>
+#include <dt-bindings/dma/at91.h>
+#include <dt-bindings/pinctrl/at91.h>
+#include <dt-bindings/interrupt-controller/irq.h>
+#include <dt-bindings/gpio/gpio.h>
+
+/ {
+	model = "Atmel SAMA5D4 family SoC";
+	compatible = "atmel,sama5d4";
+	interrupt-parent = <&aic>;
+
+	aliases {
+		serial0 = &usart3;
+		serial1 = &usart4;
+		serial2 = &usart2;
+		serial3 = &usart0;
+		serial4 = &usart1;
+		serial5 = &uart0;
+		serial6 = &uart1;
+		gpio0 = &pioA;
+		gpio1 = &pioB;
+		gpio2 = &pioC;
+		gpio3 = &pioD;
+		gpio4 = &pioE;
+		pwm0 = &pwm0;
+		ssc0 = &ssc0;
+		ssc1 = &ssc1;
+		tcb0 = &tcb0;
+		tcb1 = &tcb1;
+		i2c0 = &i2c0;
+		i2c1 = &i2c1;
+		i2c2 = &i2c2;
+	};
+	cpus {
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		cpu@0 {
+			device_type = "cpu";
+			compatible = "arm,cortex-a5";
+			reg = <0>;
+			next-level-cache = <&L2>;
+		};
+	};
+
+	memory {
+		reg = <0x20000000 0x20000000>;
+	};
+
+	clocks {
+		slow_xtal: slow_xtal {
+			compatible = "fixed-clock";
+			#clock-cells = <0>;
+			clock-frequency = <0>;
+		};
+
+		main_xtal: main_xtal {
+			compatible = "fixed-clock";
+			#clock-cells = <0>;
+			clock-frequency = <0>;
+		};
+
+		adc_op_clk: adc_op_clk{
+			compatible = "fixed-clock";
+			#clock-cells = <0>;
+			clock-frequency = <1000000>;
+		};
+	};
+
+	ns_sram: sram@00210000 {
+		compatible = "mmio-sram";
+		reg = <0x00210000 0x10000>;
+	};
+
+	ahb {
+		compatible = "simple-bus";
+		#address-cells = <1>;
+		#size-cells = <1>;
+		ranges;
+		u-boot,dm-pre-reloc;
+
+		usb0: gadget@00400000 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			compatible = "atmel,sama5d3-udc";
+			reg = <0x00400000 0x100000
+			       0xfc02c000 0x4000>;
+			interrupts = <47 IRQ_TYPE_LEVEL_HIGH 2>;
+			clocks = <&udphs_clk>, <&utmi>;
+			clock-names = "pclk", "hclk";
+			status = "disabled";
+
+			ep0: endpoint@0 {
+				reg = <0>;
+				atmel,fifo-size = <64>;
+				atmel,nb-banks = <1>;
+			};
+
+			ep1: endpoint@1 {
+				reg = <1>;
+				atmel,fifo-size = <1024>;
+				atmel,nb-banks = <3>;
+				atmel,can-dma;
+				atmel,can-isoc;
+			};
+
+			ep2: endpoint@2 {
+				reg = <2>;
+				atmel,fifo-size = <1024>;
+				atmel,nb-banks = <3>;
+				atmel,can-dma;
+				atmel,can-isoc;
+			};
+
+			ep3: endpoint@3 {
+				reg = <3>;
+				atmel,fifo-size = <1024>;
+				atmel,nb-banks = <2>;
+				atmel,can-dma;
+				atmel,can-isoc;
+			};
+
+			ep4: endpoint@4 {
+				reg = <4>;
+				atmel,fifo-size = <1024>;
+				atmel,nb-banks = <2>;
+				atmel,can-dma;
+				atmel,can-isoc;
+			};
+
+			ep5: endpoint@5 {
+				reg = <5>;
+				atmel,fifo-size = <1024>;
+				atmel,nb-banks = <2>;
+				atmel,can-dma;
+				atmel,can-isoc;
+			};
+
+			ep6: endpoint@6 {
+				reg = <6>;
+				atmel,fifo-size = <1024>;
+				atmel,nb-banks = <2>;
+				atmel,can-dma;
+				atmel,can-isoc;
+			};
+
+			ep7: endpoint@7 {
+				reg = <7>;
+				atmel,fifo-size = <1024>;
+				atmel,nb-banks = <2>;
+				atmel,can-dma;
+				atmel,can-isoc;
+			};
+
+			ep8: endpoint@8 {
+				reg = <8>;
+				atmel,fifo-size = <1024>;
+				atmel,nb-banks = <2>;
+				atmel,can-isoc;
+			};
+
+			ep9: endpoint@9 {
+				reg = <9>;
+				atmel,fifo-size = <1024>;
+				atmel,nb-banks = <2>;
+				atmel,can-isoc;
+			};
+
+			ep10: endpoint@10 {
+				reg = <10>;
+				atmel,fifo-size = <1024>;
+				atmel,nb-banks = <2>;
+				atmel,can-isoc;
+			};
+
+			ep11: endpoint@11 {
+				reg = <11>;
+				atmel,fifo-size = <1024>;
+				atmel,nb-banks = <2>;
+				atmel,can-isoc;
+			};
+
+			ep12: endpoint@12 {
+				reg = <12>;
+				atmel,fifo-size = <1024>;
+				atmel,nb-banks = <2>;
+				atmel,can-isoc;
+			};
+
+			ep13: endpoint@13 {
+				reg = <13>;
+				atmel,fifo-size = <1024>;
+				atmel,nb-banks = <2>;
+				atmel,can-isoc;
+			};
+
+			ep14: endpoint@14 {
+				reg = <14>;
+				atmel,fifo-size = <1024>;
+				atmel,nb-banks = <2>;
+				atmel,can-isoc;
+			};
+
+			ep15: endpoint@15 {
+				reg = <15>;
+				atmel,fifo-size = <1024>;
+				atmel,nb-banks = <2>;
+				atmel,can-isoc;
+			};
+		};
+
+		usb1: ohci@00500000 {
+			compatible = "atmel,at91rm9200-ohci", "usb-ohci";
+			reg = <0x00500000 0x100000>;
+			interrupts = <46 IRQ_TYPE_LEVEL_HIGH 2>;
+			clocks = <&uhphs_clk>, <&uhphs_clk>, <&uhpck>;
+			clock-names = "ohci_clk", "hclk", "uhpck";
+			status = "disabled";
+		};
+
+		usb2: ehci@00600000 {
+			compatible = "atmel,at91sam9g45-ehci", "usb-ehci";
+			reg = <0x00600000 0x100000>;
+			interrupts = <46 IRQ_TYPE_LEVEL_HIGH 2>;
+			clocks = <&utmi>, <&uhphs_clk>;
+			clock-names = "usb_clk", "ehci_clk";
+			status = "disabled";
+		};
+
+		L2: cache-controller@00a00000 {
+			compatible = "arm,pl310-cache";
+			reg = <0x00a00000 0x1000>;
+			interrupts = <67 IRQ_TYPE_LEVEL_HIGH 4>;
+			cache-unified;
+			cache-level = <2>;
+		};
+
+		nand0: nand@80000000 {
+			compatible = "atmel,sama5d4-nand", "atmel,at91rm9200-nand";
+			#address-cells = <1>;
+			#size-cells = <1>;
+			ranges;
+			reg = <	0x80000000 0x08000000	/* EBI CS3 */
+				0xfc05c070 0x00000490	/* SMC PMECC regs */
+				0xfc05c500 0x00000100	/* SMC PMECC Error Location regs */
+				>;
+			interrupts = <22 IRQ_TYPE_LEVEL_HIGH 6>;
+			atmel,nand-addr-offset = <21>;
+			atmel,nand-cmd-offset = <22>;
+			atmel,nand-has-dma;
+			pinctrl-names = "default";
+			pinctrl-0 = <&pinctrl_nand>;
+			status = "disabled";
+
+			nfc@90000000 {
+				compatible = "atmel,sama5d3-nfc";
+				#address-cells = <1>;
+				#size-cells = <1>;
+				reg = <
+					0x90000000 0x08000000	/* NFC Command Registers */
+					0xfc05c000 0x00000070	/* NFC HSMC regs */
+					0x00100000 0x00100000	/* NFC SRAM banks */
+                                         >;
+				clocks = <&hsmc_clk>;
+				atmel,write-by-sram;
+			};
+		};
+
+		apb {
+			compatible = "simple-bus";
+			#address-cells = <1>;
+			#size-cells = <1>;
+			ranges;
+			u-boot,dm-pre-reloc;
+
+			hlcdc: hlcdc@f0000000 {
+				compatible = "atmel,sama5d4-hlcdc";
+				reg = <0xf0000000 0x4000>;
+				interrupts = <51 IRQ_TYPE_LEVEL_HIGH 0>;
+				clocks = <&lcdc_clk>, <&lcdck>, <&clk32k>;
+				clock-names = "periph_clk","sys_clk", "slow_clk";
+				status = "disabled";
+
+				hlcdc-display-controller {
+					compatible = "atmel,hlcdc-display-controller";
+					#address-cells = <1>;
+					#size-cells = <0>;
+
+					port@0 {
+						#address-cells = <1>;
+						#size-cells = <0>;
+						reg = <0>;
+					};
+				};
+
+				hlcdc_pwm: hlcdc-pwm {
+					compatible = "atmel,hlcdc-pwm";
+					pinctrl-names = "default";
+					pinctrl-0 = <&pinctrl_lcd_pwm>;
+					#pwm-cells = <3>;
+				};
+			};
+
+			dma1: dma-controller@f0004000 {
+				compatible = "atmel,sama5d4-dma";
+				reg = <0xf0004000 0x200>;
+				interrupts = <50 IRQ_TYPE_LEVEL_HIGH 0>;
+				#dma-cells = <1>;
+				clocks = <&dma1_clk>;
+				clock-names = "dma_clk";
+			};
+
+			isi: isi@f0008000 {
+				compatible = "atmel,at91sam9g45-isi";
+				reg = <0xf0008000 0x4000>;
+				interrupts = <52 IRQ_TYPE_LEVEL_HIGH 5>;
+				pinctrl-names = "default";
+				pinctrl-0 = <&pinctrl_isi_data_0_7>;
+				clocks = <&isi_clk>;
+				clock-names = "isi_clk";
+				status = "disabled";
+				port {
+					#address-cells = <1>;
+					#size-cells = <0>;
+				};
+			};
+
+			ramc0: ramc@f0010000 {
+				compatible = "atmel,sama5d3-ddramc";
+				reg = <0xf0010000 0x200>;
+				clocks = <&ddrck>, <&mpddr_clk>;
+				clock-names = "ddrck", "mpddr";
+			};
+
+			dma0: dma-controller@f0014000 {
+				compatible = "atmel,sama5d4-dma";
+				reg = <0xf0014000 0x200>;
+				interrupts = <8 IRQ_TYPE_LEVEL_HIGH 0>;
+				#dma-cells = <1>;
+				clocks = <&dma0_clk>;
+				clock-names = "dma_clk";
+			};
+
+			pmc: pmc@f0018000 {
+				compatible = "atmel,sama5d3-pmc", "syscon";
+				reg = <0xf0018000 0x120>;
+				interrupts = <1 IRQ_TYPE_LEVEL_HIGH 7>;
+				interrupt-controller;
+				#address-cells = <1>;
+				#size-cells = <0>;
+				#interrupt-cells = <1>;
+				u-boot,dm-pre-reloc;
+
+				main_rc_osc: main_rc_osc {
+					compatible = "atmel,at91sam9x5-clk-main-rc-osc";
+					#clock-cells = <0>;
+					interrupt-parent = <&pmc>;
+					interrupts = <AT91_PMC_MOSCRCS>;
+					clock-frequency = <12000000>;
+					clock-accuracy = <100000000>;
+				};
+
+				main_osc: main_osc {
+					compatible = "atmel,at91rm9200-clk-main-osc";
+					#clock-cells = <0>;
+					interrupt-parent = <&pmc>;
+					interrupts = <AT91_PMC_MOSCS>;
+					clocks = <&main_xtal>;
+				};
+
+				main: mainck {
+					compatible = "atmel,at91sam9x5-clk-main";
+					#clock-cells = <0>;
+					interrupt-parent = <&pmc>;
+					interrupts = <AT91_PMC_MOSCSELS>;
+					clocks = <&main_rc_osc &main_osc>;
+					u-boot,dm-pre-reloc;
+				};
+
+				plla: pllack@0 {
+					compatible = "atmel,sama5d3-clk-pll";
+					#clock-cells = <0>;
+					interrupt-parent = <&pmc>;
+					interrupts = <AT91_PMC_LOCKA>;
+					clocks = <&main>;
+					reg = <0>;
+					atmel,clk-input-range = <12000000 12000000>;
+					#atmel,pll-clk-output-range-cells = <4>;
+					atmel,pll-clk-output-ranges = <600000000 1200000000 0 0>;
+				};
+
+				plladiv: plladivck {
+					compatible = "atmel,at91sam9x5-clk-plldiv";
+					#clock-cells = <0>;
+					clocks = <&plla>;
+				};
+
+				utmi: utmick {
+					compatible = "atmel,at91sam9x5-clk-utmi";
+					#clock-cells = <0>;
+					interrupt-parent = <&pmc>;
+					interrupts = <AT91_PMC_LOCKU>;
+					clocks = <&main>;
+					u-boot,dm-pre-reloc;
+				};
+
+				mck: masterck {
+					compatible = "atmel,at91sam9x5-clk-master";
+					#clock-cells = <0>;
+					interrupt-parent = <&pmc>;
+					interrupts = <AT91_PMC_MCKRDY>;
+					clocks = <&clk32k>, <&main>, <&plladiv>, <&utmi>;
+					atmel,clk-output-range = <125000000 200000000>;
+					atmel,clk-divisors = <1 2 4 3>;
+				};
+
+				h32ck: h32mxck {
+					#clock-cells = <0>;
+					compatible = "atmel,sama5d4-clk-h32mx";
+					clocks = <&mck>;
+					u-boot,dm-pre-reloc;
+				};
+
+				usb: usbck {
+					compatible = "atmel,at91sam9x5-clk-usb";
+					#clock-cells = <0>;
+					clocks = <&plladiv>, <&utmi>;
+				};
+
+				prog: progck {
+					compatible = "atmel,at91sam9x5-clk-programmable";
+					#address-cells = <1>;
+					#size-cells = <0>;
+					interrupt-parent = <&pmc>;
+					clocks = <&clk32k>, <&main>, <&plladiv>, <&utmi>, <&mck>;
+
+					prog0: prog@0 {
+						#clock-cells = <0>;
+						reg = <0>;
+						interrupts = <AT91_PMC_PCKRDY(0)>;
+					};
+
+					prog1: prog@1 {
+						#clock-cells = <0>;
+						reg = <1>;
+						interrupts = <AT91_PMC_PCKRDY(1)>;
+					};
+
+					prog2: prog@2 {
+						#clock-cells = <0>;
+						reg = <2>;
+						interrupts = <AT91_PMC_PCKRDY(2)>;
+					};
+				};
+
+				smd: smdclk {
+					compatible = "atmel,at91sam9x5-clk-smd";
+					#clock-cells = <0>;
+					clocks = <&plladiv>, <&utmi>;
+				};
+
+				systemck {
+					compatible = "atmel,at91rm9200-clk-system";
+					#address-cells = <1>;
+					#size-cells = <0>;
+					u-boot,dm-pre-reloc;
+
+					ddrck: ddrck@2 {
+						#clock-cells = <0>;
+						reg = <2>;
+						clocks = <&mck>;
+					};
+
+					lcdck: lcdck@3 {
+						#clock-cells = <0>;
+						reg = <3>;
+						clocks = <&mck>;
+					};
+
+					smdck: smdck@4 {
+						#clock-cells = <0>;
+						reg = <4>;
+						clocks = <&smd>;
+					};
+
+					uhpck: uhpcki@6 {
+						#clock-cells = <0>;
+						reg = <6>;
+						clocks = <&usb>;
+					};
+
+					udpck: udpck@7 {
+						#clock-cells = <0>;
+						reg = <7>;
+						clocks = <&usb>;
+					};
+
+					pck0: pck0@8 {
+						#clock-cells = <0>;
+						reg = <8>;
+						clocks = <&prog0>;
+					};
+
+					pck1: pck1@9 {
+						#clock-cells = <0>;
+						reg = <9>;
+						clocks = <&prog1>;
+					};
+
+					pck2: pck2@10 {
+						#clock-cells = <0>;
+						reg = <10>;
+						clocks = <&prog2>;
+					};
+				};
+
+				periph32ck {
+					compatible = "atmel,at91sam9x5-clk-peripheral";
+					#address-cells = <1>;
+					#size-cells = <0>;
+					clocks = <&h32ck>;
+					u-boot,dm-pre-reloc;
+
+					pioD_clk: pioD_clk@5 {
+						u-boot,dm-pre-reloc;
+						#clock-cells = <0>;
+						reg = <5>;
+					};
+
+					usart0_clk: usart0_clk@6 {
+						#clock-cells = <0>;
+						reg = <6>;
+					};
+
+					usart1_clk: usart1_clk@7 {
+						#clock-cells = <0>;
+						reg = <7>;
+					};
+
+					icm_clk: icm_clk@9 {
+						#clock-cells = <0>;
+						reg = <9>;
+					};
+
+					aes_clk: aes_clk@12 {
+						#clock-cells = <0>;
+						reg = <12>;
+					};
+
+					tdes_clk: tdes_clk@14 {
+						#clock-cells = <0>;
+						reg = <14>;
+					};
+
+					sha_clk: sha_clk@15 {
+						#clock-cells = <0>;
+						reg = <15>;
+					};
+
+					matrix1_clk: matrix1_clk@17 {
+						#clock-cells = <0>;
+						reg = <17>;
+					};
+
+					hsmc_clk: hsmc_clk@22 {
+						#clock-cells = <0>;
+						reg = <22>;
+					};
+
+					pioA_clk: pioA_clk@23 {
+						u-boot,dm-pre-reloc;
+						#clock-cells = <0>;
+						reg = <23>;
+					};
+
+					pioB_clk: pioB_clk@24 {
+						u-boot,dm-pre-reloc;
+						#clock-cells = <0>;
+						reg = <24>;
+					};
+
+					pioC_clk: pioC_clk@25 {
+						u-boot,dm-pre-reloc;
+						#clock-cells = <0>;
+						reg = <25>;
+					};
+
+					pioE_clk: pioE_clk@26 {
+						u-boot,dm-pre-reloc;
+						#clock-cells = <0>;
+						reg = <26>;
+					};
+
+					uart0_clk: uart0_clk@27 {
+						#clock-cells = <0>;
+						reg = <27>;
+					};
+
+					uart1_clk: uart1_clk@28 {
+						#clock-cells = <0>;
+						reg = <28>;
+					};
+
+					usart2_clk: usart2_clk@29 {
+						#clock-cells = <0>;
+						reg = <29>;
+					};
+
+					usart3_clk: usart3_clk@30 {
+						u-boot,dm-pre-reloc;
+						#clock-cells = <0>;
+						reg = <30>;
+					};
+
+					usart4_clk: usart4_clk@31 {
+						#clock-cells = <0>;
+						reg = <31>;
+					};
+
+					twi0_clk: twi0_clk@32 {
+						reg = <32>;
+						#clock-cells = <0>;
+					};
+
+					twi1_clk: twi1_clk@33 {
+						#clock-cells = <0>;
+						reg = <33>;
+					};
+
+					twi2_clk: twi2_clk@34 {
+						#clock-cells = <0>;
+						reg = <34>;
+					};
+
+					mci0_clk: mci0_clk@35 {
+						#clock-cells = <0>;
+						reg = <35>;
+					};
+
+					mci1_clk: mci1_clk@36 {
+						u-boot,dm-pre-reloc;
+						#clock-cells = <0>;
+						reg = <36>;
+					};
+
+					spi0_clk: spi0_clk@37 {
+						u-boot,dm-pre-reloc;
+						#clock-cells = <0>;
+						reg = <37>;
+					};
+
+					spi1_clk: spi1_clk@38 {
+						#clock-cells = <0>;
+						reg = <38>;
+					};
+
+					spi2_clk: spi2_clk@39 {
+						#clock-cells = <0>;
+						reg = <39>;
+					};
+
+					tcb0_clk: tcb0_clk@40 {
+						#clock-cells = <0>;
+						reg = <40>;
+					};
+
+					tcb1_clk: tcb1_clk@41 {
+						#clock-cells = <0>;
+						reg = <41>;
+					};
+
+					tcb2_clk: tcb2_clk@42 {
+						#clock-cells = <0>;
+						reg = <42>;
+					};
+
+					pwm_clk: pwm_clk@43 {
+						#clock-cells = <0>;
+						reg = <43>;
+					};
+
+					adc_clk: adc_clk@44 {
+						#clock-cells = <0>;
+						reg = <44>;
+					};
+
+					dbgu_clk: dbgu_clk@45 {
+						#clock-cells = <0>;
+						reg = <45>;
+					};
+
+					uhphs_clk: uhphs_clk@46 {
+						#clock-cells = <0>;
+						reg = <46>;
+					};
+
+					udphs_clk: udphs_clk@47 {
+						#clock-cells = <0>;
+						reg = <47>;
+					};
+
+					ssc0_clk: ssc0_clki@48 {
+						#clock-cells = <0>;
+						reg = <48>;
+					};
+
+					ssc1_clk: ssc1_clk@49 {
+						#clock-cells = <0>;
+						reg = <49>;
+					};
+
+					trng_clk: trng_clk@53 {
+						#clock-cells = <0>;
+						reg = <53>;
+					};
+
+					macb0_clk: macb0_clk@54 {
+						#clock-cells = <0>;
+						reg = <54>;
+					};
+
+					macb1_clk: macb1_clk@55 {
+						#clock-cells = <0>;
+						reg = <55>;
+					};
+
+					fuse_clk: fuse_clk@57 {
+						#clock-cells = <0>;
+						reg = <57>;
+					};
+
+					securam_clk: securam_clk@59 {
+						#clock-cells = <0>;
+						reg = <59>;
+					};
+
+					smd_clk: smd_clk@61 {
+						#clock-cells = <0>;
+						reg = <61>;
+					};
+
+					twi3_clk: twi3_clk@62 {
+						#clock-cells = <0>;
+						reg = <62>;
+					};
+
+					catb_clk: catb_clk@63 {
+						#clock-cells = <0>;
+						reg = <63>;
+					};
+				};
+
+				periph64ck {
+					compatible = "atmel,at91sam9x5-clk-peripheral";
+					#address-cells = <1>;
+					#size-cells = <0>;
+					clocks = <&mck>;
+
+					dma0_clk: dma0_clk@8 {
+						#clock-cells = <0>;
+						reg = <8>;
+					};
+
+					cpkcc_clk: cpkcc_clk@10 {
+						#clock-cells = <0>;
+						reg = <10>;
+					};
+
+					aesb_clk: aesb_clk@13 {
+						#clock-cells = <0>;
+						reg = <13>;
+					};
+
+					mpddr_clk: mpddr_clk@16 {
+						#clock-cells = <0>;
+						reg = <16>;
+					};
+
+					matrix0_clk: matrix0_clk@18 {
+						#clock-cells = <0>;
+						reg = <18>;
+					};
+
+					vdec_clk: vdec_clk@19 {
+						#clock-cells = <0>;
+						reg = <19>;
+					};
+
+					dma1_clk: dma1_clk@50 {
+						#clock-cells = <0>;
+						reg = <50>;
+					};
+
+					lcdc_clk: lcdc_clk@51 {
+						#clock-cells = <0>;
+						reg = <51>;
+					};
+
+					isi_clk: isi_clk@52 {
+						#clock-cells = <0>;
+						reg = <52>;
+					};
+				};
+			};
+
+			mmc0: mmc@f8000000 {
+				compatible = "atmel,hsmci";
+				reg = <0xf8000000 0x600>;
+				interrupts = <35 IRQ_TYPE_LEVEL_HIGH 0>;
+				dmas = <&dma1
+					(AT91_XDMAC_DT_MEM_IF(0) | AT91_XDMAC_DT_PER_IF(1)
+					| AT91_XDMAC_DT_PERID(0))>;
+				dma-names = "rxtx";
+				pinctrl-names = "default";
+				pinctrl-0 = <&pinctrl_mmc0_clk_cmd_dat0 &pinctrl_mmc0_dat1_3>;
+				status = "disabled";
+				#address-cells = <1>;
+				#size-cells = <0>;
+				clocks = <&mci0_clk>;
+				clock-names = "mci_clk";
+			};
+
+			uart0: serial@f8004000 {
+				compatible = "atmel,at91sam9260-usart";
+				reg = <0xf8004000 0x100>;
+				interrupts = <27 IRQ_TYPE_LEVEL_HIGH 5>;
+				dmas = <&dma1
+					(AT91_XDMAC_DT_MEM_IF(0) | AT91_XDMAC_DT_PER_IF(1)
+					| AT91_XDMAC_DT_PERID(22))>,
+				       <&dma1
+					(AT91_XDMAC_DT_MEM_IF(0) | AT91_XDMAC_DT_PER_IF(1)
+					| AT91_XDMAC_DT_PERID(23))>;
+				dma-names = "tx", "rx";
+				pinctrl-names = "default";
+				pinctrl-0 = <&pinctrl_uart0>;
+				clocks = <&uart0_clk>;
+				clock-names = "usart";
+				status = "disabled";
+			};
+
+			ssc0: ssc@f8008000 {
+				compatible = "atmel,at91sam9g45-ssc";
+				reg = <0xf8008000 0x4000>;
+				interrupts = <48 IRQ_TYPE_LEVEL_HIGH 0>;
+				pinctrl-names = "default";
+				pinctrl-0 = <&pinctrl_ssc0_tx &pinctrl_ssc0_rx>;
+				dmas = <&dma1
+					(AT91_XDMAC_DT_MEM_IF(0) | AT91_XDMAC_DT_PER_IF(1)
+					| AT91_XDMAC_DT_PERID(26))>,
+				       <&dma1
+					(AT91_XDMAC_DT_MEM_IF(0) | AT91_XDMAC_DT_PER_IF(1)
+					| AT91_XDMAC_DT_PERID(27))>;
+				dma-names = "tx", "rx";
+				clocks = <&ssc0_clk>;
+				clock-names = "pclk";
+				status = "disabled";
+			};
+
+			pwm0: pwm@f800c000 {
+				compatible = "atmel,sama5d3-pwm";
+				reg = <0xf800c000 0x300>;
+				interrupts = <43 IRQ_TYPE_LEVEL_HIGH 4>;
+				#pwm-cells = <3>;
+				clocks = <&pwm_clk>;
+				status = "disabled";
+			};
+
+			spi0: spi@f8010000 {
+				#address-cells = <1>;
+				#size-cells = <0>;
+				compatible = "atmel,at91rm9200-spi";
+				reg = <0xf8010000 0x100>;
+				interrupts = <37 IRQ_TYPE_LEVEL_HIGH 3>;
+				dmas = <&dma1
+					(AT91_XDMAC_DT_MEM_IF(0) | AT91_XDMAC_DT_PER_IF(1)
+					| AT91_XDMAC_DT_PERID(10))>,
+				       <&dma1
+					(AT91_XDMAC_DT_MEM_IF(0) | AT91_XDMAC_DT_PER_IF(1)
+					| AT91_XDMAC_DT_PERID(11))>;
+				dma-names = "tx", "rx";
+				pinctrl-names = "default";
+				pinctrl-0 = <&pinctrl_spi0>;
+				clocks = <&spi0_clk>;
+				clock-names = "spi_clk";
+				status = "disabled";
+			};
+
+			i2c0: i2c@f8014000 {
+				compatible = "atmel,sama5d4-i2c";
+				reg = <0xf8014000 0x4000>;
+				interrupts = <32 IRQ_TYPE_LEVEL_HIGH 6>;
+				dmas = <&dma1
+					(AT91_XDMAC_DT_MEM_IF(0) | AT91_XDMAC_DT_PER_IF(1)
+					| AT91_XDMAC_DT_PERID(2))>,
+				       <&dma1
+					(AT91_XDMAC_DT_MEM_IF(0) | AT91_XDMAC_DT_PER_IF(1)
+					| AT91_XDMAC_DT_PERID(3))>;
+				dma-names = "tx", "rx";
+				pinctrl-names = "default";
+				pinctrl-0 = <&pinctrl_i2c0>;
+				#address-cells = <1>;
+				#size-cells = <0>;
+				clocks = <&twi0_clk>;
+				status = "disabled";
+			};
+
+			i2c1: i2c@f8018000 {
+				compatible = "atmel,sama5d4-i2c";
+				reg = <0xf8018000 0x4000>;
+				interrupts = <33 IRQ_TYPE_LEVEL_HIGH 6>;
+				dmas = <&dma1
+					(AT91_XDMAC_DT_MEM_IF(0) | AT91_XDMAC_DT_PER_IF(1)
+					| AT91_XDMAC_DT_PERID(4))>,
+				       <&dma1
+					(AT91_XDMAC_DT_MEM_IF(0) | AT91_XDMAC_DT_PER_IF(1)
+					| AT91_XDMAC_DT_PERID(5))>;
+				dma-names = "tx", "rx";
+				pinctrl-names = "default";
+				pinctrl-0 = <&pinctrl_i2c1>;
+				#address-cells = <1>;
+				#size-cells = <0>;
+				clocks = <&twi1_clk>;
+				status = "disabled";
+			};
+
+			tcb0: timer@f801c000 {
+				compatible = "atmel,at91sam9x5-tcb";
+				reg = <0xf801c000 0x100>;
+				interrupts = <40 IRQ_TYPE_LEVEL_HIGH 0>;
+				clocks = <&tcb0_clk>, <&clk32k>;
+				clock-names = "t0_clk", "slow_clk";
+			};
+
+			macb0: ethernet@f8020000 {
+				compatible = "atmel,sama5d4-gem";
+				reg = <0xf8020000 0x100>;
+				interrupts = <54 IRQ_TYPE_LEVEL_HIGH 3>;
+				pinctrl-names = "default";
+				pinctrl-0 = <&pinctrl_macb0_rmii>;
+				#address-cells = <1>;
+				#size-cells = <0>;
+				clocks = <&macb0_clk>, <&macb0_clk>;
+				clock-names = "hclk", "pclk";
+				status = "disabled";
+			};
+
+			i2c2: i2c@f8024000 {
+				compatible = "atmel,sama5d4-i2c";
+				reg = <0xf8024000 0x4000>;
+				interrupts = <34 IRQ_TYPE_LEVEL_HIGH 6>;
+				dmas = <&dma1
+					(AT91_XDMAC_DT_MEM_IF(0) | AT91_XDMAC_DT_PER_IF(1)
+					| AT91_XDMAC_DT_PERID(6))>,
+				       <&dma1
+					(AT91_XDMAC_DT_MEM_IF(0) | AT91_XDMAC_DT_PER_IF(1)
+					| AT91_XDMAC_DT_PERID(7))>;
+				dma-names = "tx", "rx";
+				pinctrl-names = "default";
+				pinctrl-0 = <&pinctrl_i2c2>;
+				#address-cells = <1>;
+				#size-cells = <0>;
+				clocks = <&twi2_clk>;
+				status = "disabled";
+			};
+
+			sfr: sfr@f8028000 {
+				compatible = "atmel,sama5d4-sfr", "syscon";
+				reg = <0xf8028000 0x60>;
+			};
+
+			usart0: serial@f802c000 {
+				compatible = "atmel,at91sam9260-usart";
+				reg = <0xf802c000 0x100>;
+				interrupts = <6 IRQ_TYPE_LEVEL_HIGH 5>;
+				dmas = <&dma0
+					(AT91_XDMAC_DT_MEM_IF(0) | AT91_XDMAC_DT_PER_IF(1)
+					| AT91_XDMAC_DT_PERID(36))>,
+				       <&dma0
+					(AT91_XDMAC_DT_MEM_IF(0) | AT91_XDMAC_DT_PER_IF(1)
+					| AT91_XDMAC_DT_PERID(37))>;
+				dma-names = "tx", "rx";
+				pinctrl-names = "default";
+				pinctrl-0 = <&pinctrl_usart0 &pinctrl_usart0_rts &pinctrl_usart0_cts>;
+				clocks = <&usart0_clk>;
+				clock-names = "usart";
+				status = "disabled";
+			};
+
+			usart1: serial@f8030000 {
+				compatible = "atmel,at91sam9260-usart";
+				reg = <0xf8030000 0x100>;
+				interrupts = <7 IRQ_TYPE_LEVEL_HIGH 5>;
+				dmas = <&dma0
+					(AT91_XDMAC_DT_MEM_IF(0) | AT91_XDMAC_DT_PER_IF(1)
+					| AT91_XDMAC_DT_PERID(38))>,
+				       <&dma0
+					(AT91_XDMAC_DT_MEM_IF(0) | AT91_XDMAC_DT_PER_IF(1)
+					| AT91_XDMAC_DT_PERID(39))>;
+				dma-names = "tx", "rx";
+				pinctrl-names = "default";
+				pinctrl-0 = <&pinctrl_usart1 &pinctrl_usart1_rts &pinctrl_usart1_cts>;
+				clocks = <&usart1_clk>;
+				clock-names = "usart";
+				status = "disabled";
+			};
+
+			mmc1: mmc@fc000000 {
+				compatible = "atmel,hsmci";
+				reg = <0xfc000000 0x600>;
+				interrupts = <36 IRQ_TYPE_LEVEL_HIGH 0>;
+				dmas = <&dma1
+					(AT91_XDMAC_DT_MEM_IF(0) | AT91_XDMAC_DT_PER_IF(1)
+					| AT91_XDMAC_DT_PERID(1))>;
+				dma-names = "rxtx";
+				pinctrl-names = "default";
+				pinctrl-0 = <&pinctrl_mmc1_clk_cmd_dat0 &pinctrl_mmc1_dat1_3>;
+				status = "disabled";
+				#address-cells = <1>;
+				#size-cells = <0>;
+				clocks = <&mci1_clk>;
+				clock-names = "mci_clk";
+			};
+
+			uart1: serial@fc004000 {
+				compatible = "atmel,at91sam9260-usart";
+				reg = <0xfc004000 0x100>;
+				interrupts = <28 IRQ_TYPE_LEVEL_HIGH 5>;
+				dmas = <&dma1
+					(AT91_XDMAC_DT_MEM_IF(0) | AT91_XDMAC_DT_PER_IF(1)
+					| AT91_XDMAC_DT_PERID(24))>,
+				       <&dma1
+					(AT91_XDMAC_DT_MEM_IF(0) | AT91_XDMAC_DT_PER_IF(1)
+					| AT91_XDMAC_DT_PERID(25))>;
+				dma-names = "tx", "rx";
+				pinctrl-names = "default";
+				pinctrl-0 = <&pinctrl_uart1>;
+				clocks = <&uart1_clk>;
+				clock-names = "usart";
+				status = "disabled";
+			};
+
+			usart2: serial@fc008000 {
+				compatible = "atmel,at91sam9260-usart";
+				reg = <0xfc008000 0x100>;
+				interrupts = <29 IRQ_TYPE_LEVEL_HIGH 5>;
+				dmas = <&dma1
+					(AT91_XDMAC_DT_MEM_IF(0) | AT91_XDMAC_DT_PER_IF(1)
+					| AT91_XDMAC_DT_PERID(16))>,
+				       <&dma1
+					(AT91_XDMAC_DT_MEM_IF(0) | AT91_XDMAC_DT_PER_IF(1)
+					| AT91_XDMAC_DT_PERID(17))>;
+				dma-names = "tx", "rx";
+				pinctrl-names = "default";
+				pinctrl-0 = <&pinctrl_usart2 &pinctrl_usart2_rts &pinctrl_usart2_cts>;
+				clocks = <&usart2_clk>;
+				clock-names = "usart";
+				status = "disabled";
+			};
+
+			usart3: serial@fc00c000 {
+				compatible = "atmel,at91sam9260-usart";
+				reg = <0xfc00c000 0x100>;
+				interrupts = <30 IRQ_TYPE_LEVEL_HIGH 5>;
+				dmas = <&dma1
+					(AT91_XDMAC_DT_MEM_IF(0) | AT91_XDMAC_DT_PER_IF(1)
+					| AT91_XDMAC_DT_PERID(18))>,
+				       <&dma1
+					(AT91_XDMAC_DT_MEM_IF(0) | AT91_XDMAC_DT_PER_IF(1)
+					| AT91_XDMAC_DT_PERID(19))>;
+				dma-names = "tx", "rx";
+				pinctrl-names = "default";
+				pinctrl-0 = <&pinctrl_usart3>;
+				clocks = <&usart3_clk>;
+				clock-names = "usart";
+				status = "disabled";
+			};
+
+			usart4: serial@fc010000 {
+				compatible = "atmel,at91sam9260-usart";
+				reg = <0xfc010000 0x100>;
+				interrupts = <31 IRQ_TYPE_LEVEL_HIGH 5>;
+				dmas = <&dma1
+					(AT91_XDMAC_DT_MEM_IF(0) | AT91_XDMAC_DT_PER_IF(1)
+					| AT91_XDMAC_DT_PERID(20))>,
+				       <&dma1
+					(AT91_XDMAC_DT_MEM_IF(0) | AT91_XDMAC_DT_PER_IF(1)
+					| AT91_XDMAC_DT_PERID(21))>;
+				dma-names = "tx", "rx";
+				pinctrl-names = "default";
+				pinctrl-0 = <&pinctrl_usart4>;
+				clocks = <&usart4_clk>;
+				clock-names = "usart";
+				status = "disabled";
+			};
+
+			ssc1: ssc@fc014000 {
+				compatible = "atmel,at91sam9g45-ssc";
+				reg = <0xfc014000 0x4000>;
+				interrupts = <49 IRQ_TYPE_LEVEL_HIGH 0>;
+				pinctrl-names = "default";
+				pinctrl-0 = <&pinctrl_ssc1_tx &pinctrl_ssc1_rx>;
+				dmas = <&dma1
+					(AT91_XDMAC_DT_MEM_IF(0) | AT91_XDMAC_DT_PER_IF(1)
+					| AT91_XDMAC_DT_PERID(28))>,
+				       <&dma1
+					(AT91_XDMAC_DT_MEM_IF(0) | AT91_XDMAC_DT_PER_IF(1)
+					| AT91_XDMAC_DT_PERID(29))>;
+				dma-names = "tx", "rx";
+				clocks = <&ssc1_clk>;
+				clock-names = "pclk";
+				status = "disabled";
+			};
+
+			spi1: spi@fc018000 {
+				#address-cells = <1>;
+				#size-cells = <0>;
+				compatible = "atmel,at91rm9200-spi";
+				reg = <0xfc018000 0x100>;
+				interrupts = <38 IRQ_TYPE_LEVEL_HIGH 3>;
+				dmas = <&dma1
+					(AT91_XDMAC_DT_MEM_IF(0) | AT91_XDMAC_DT_PER_IF(1)
+					| AT91_XDMAC_DT_PERID(12))>,
+				       <&dma1
+					(AT91_XDMAC_DT_MEM_IF(0) | AT91_XDMAC_DT_PER_IF(1)
+					| AT91_XDMAC_DT_PERID(13))>;
+				dma-names = "tx", "rx";
+				pinctrl-names = "default";
+				pinctrl-0 = <&pinctrl_spi1>;
+				clocks = <&spi1_clk>;
+				clock-names = "spi_clk";
+				status = "disabled";
+			};
+
+			spi2: spi@fc01c000 {
+				#address-cells = <1>;
+				#size-cells = <0>;
+				compatible = "atmel,at91rm9200-spi";
+				reg = <0xfc01c000 0x100>;
+				interrupts = <39 IRQ_TYPE_LEVEL_HIGH 3>;
+				dmas = <&dma1
+					(AT91_XDMAC_DT_MEM_IF(0) | AT91_XDMAC_DT_PER_IF(1)
+					| AT91_XDMAC_DT_PERID(14))>,
+				       <&dma1
+					(AT91_XDMAC_DT_MEM_IF(0) | AT91_XDMAC_DT_PER_IF(1)
+					| AT91_XDMAC_DT_PERID(15))>;
+				dma-names = "tx", "rx";
+				pinctrl-names = "default";
+				pinctrl-0 = <&pinctrl_spi2>;
+				clocks = <&spi2_clk>;
+				clock-names = "spi_clk";
+				status = "disabled";
+			};
+
+			tcb1: timer@fc020000 {
+				compatible = "atmel,at91sam9x5-tcb";
+				reg = <0xfc020000 0x100>;
+				interrupts = <41 IRQ_TYPE_LEVEL_HIGH 0>;
+				clocks = <&tcb1_clk>, <&clk32k>;
+				clock-names = "t0_clk", "slow_clk";
+			};
+
+			macb1: ethernet@fc028000 {
+				compatible = "atmel,sama5d4-gem";
+				reg = <0xfc028000 0x100>;
+				interrupts = <55 IRQ_TYPE_LEVEL_HIGH 3>;
+				pinctrl-names = "default";
+				pinctrl-0 = <&pinctrl_macb1_rmii>;
+				#address-cells = <1>;
+				#size-cells = <0>;
+				clocks = <&macb1_clk>, <&macb1_clk>;
+				clock-names = "hclk", "pclk";
+				status = "disabled";
+			};
+
+			trng@fc030000 {
+				compatible = "atmel,at91sam9g45-trng";
+				reg = <0xfc030000 0x100>;
+				interrupts = <53 IRQ_TYPE_LEVEL_HIGH 0>;
+				clocks = <&trng_clk>;
+			};
+
+			adc0: adc@fc034000 {
+				compatible = "atmel,at91sam9x5-adc";
+				reg = <0xfc034000 0x100>;
+				interrupts = <44 IRQ_TYPE_LEVEL_HIGH 5>;
+				clocks = <&adc_clk>,
+					 <&adc_op_clk>;
+				clock-names = "adc_clk", "adc_op_clk";
+				atmel,adc-channels-used = <0x01f>;
+				atmel,adc-startup-time = <40>;
+				atmel,adc-use-external-triggers;
+				atmel,adc-vref = <3000>;
+				atmel,adc-res = <8 10>;
+				atmel,adc-sample-hold-time = <11>;
+				atmel,adc-res-names = "lowres", "highres";
+				atmel,adc-ts-pressure-threshold = <10000>;
+				#address-cells = <1>;
+				#size-cells = <0>;
+				status = "disabled";
+
+				trigger@0 {
+					trigger-name = "external-rising";
+					trigger-value = <0x1>;
+					trigger-external;
+					reg = <0>;
+				};
+				trigger@1 {
+					trigger-name = "external-falling";
+					trigger-value = <0x2>;
+					trigger-external;
+					reg = <1>;
+				};
+				trigger@2 {
+					trigger-name = "external-any";
+					trigger-value = <0x3>;
+					trigger-external;
+					reg = <2>;
+				};
+				trigger@3 {
+					trigger-name = "continuous";
+					trigger-value = <0x6>;
+					reg = <3>;
+				};
+			};
+
+			aes@fc044000 {
+				compatible = "atmel,at91sam9g46-aes";
+				reg = <0xfc044000 0x100>;
+				interrupts = <12 IRQ_TYPE_LEVEL_HIGH 0>;
+				dmas = <&dma0 (AT91_XDMAC_DT_MEM_IF(0) | AT91_XDMAC_DT_PER_IF(1)
+					| AT91_XDMAC_DT_PERID(41))>,
+				       <&dma0 (AT91_XDMAC_DT_MEM_IF(0) | AT91_XDMAC_DT_PER_IF(1)
+					| AT91_XDMAC_DT_PERID(40))>;
+				dma-names = "tx", "rx";
+				clocks = <&aes_clk>;
+				clock-names = "aes_clk";
+				status = "okay";
+			};
+
+			tdes@fc04c000 {
+				compatible = "atmel,at91sam9g46-tdes";
+				reg = <0xfc04c000 0x100>;
+				interrupts = <14 IRQ_TYPE_LEVEL_HIGH 0>;
+				dmas = <&dma0 (AT91_XDMAC_DT_MEM_IF(0) | AT91_XDMAC_DT_PER_IF(1)
+					| AT91_XDMAC_DT_PERID(42))>,
+				       <&dma0 (AT91_XDMAC_DT_MEM_IF(0) | AT91_XDMAC_DT_PER_IF(1)
+					| AT91_XDMAC_DT_PERID(43))>;
+				dma-names = "tx", "rx";
+				clocks = <&tdes_clk>;
+				clock-names = "tdes_clk";
+				status = "okay";
+			};
+
+			sha@fc050000 {
+				compatible = "atmel,at91sam9g46-sha";
+				reg = <0xfc050000 0x100>;
+				interrupts = <15 IRQ_TYPE_LEVEL_HIGH 0>;
+				dmas = <&dma0 (AT91_XDMAC_DT_MEM_IF(0) | AT91_XDMAC_DT_PER_IF(1)
+					| AT91_XDMAC_DT_PERID(44))>;
+				dma-names = "tx";
+				clocks = <&sha_clk>;
+				clock-names = "sha_clk";
+				status = "okay";
+			};
+
+			rstc@fc068600 {
+				compatible = "atmel,sama5d3-rstc", "atmel,at91sam9g45-rstc";
+				reg = <0xfc068600 0x10>;
+				clocks = <&clk32k>;
+			};
+
+			shdwc@fc068610 {
+				compatible = "atmel,at91sam9x5-shdwc";
+				reg = <0xfc068610 0x10>;
+				clocks = <&clk32k>;
+			};
+
+			pit: timer@fc068630 {
+				compatible = "atmel,at91sam9260-pit";
+				reg = <0xfc068630 0x10>;
+				interrupts = <3 IRQ_TYPE_LEVEL_HIGH 5>;
+				clocks = <&h32ck>;
+			};
+
+			watchdog@fc068640 {
+				compatible = "atmel,sama5d4-wdt";
+				reg = <0xfc068640 0x10>;
+				interrupts = <4 IRQ_TYPE_LEVEL_HIGH 7>;
+				clocks = <&clk32k>;
+				status = "disabled";
+			};
+
+			sckc@fc068650 {
+				compatible = "atmel,at91sam9x5-sckc";
+				reg = <0xfc068650 0x4>;
+
+				slow_rc_osc: slow_rc_osc {
+					compatible = "atmel,at91sam9x5-clk-slow-rc-osc";
+					#clock-cells = <0>;
+					clock-frequency = <32768>;
+					clock-accuracy = <250000000>;
+					atmel,startup-time-usec = <75>;
+				};
+
+				slow_osc: slow_osc {
+					compatible = "atmel,at91sam9x5-clk-slow-osc";
+					#clock-cells = <0>;
+					clocks = <&slow_xtal>;
+					atmel,startup-time-usec = <1200000>;
+				};
+
+				clk32k: slowck {
+					compatible = "atmel,at91sam9x5-clk-slow";
+					#clock-cells = <0>;
+					clocks = <&slow_rc_osc &slow_osc>;
+				};
+			};
+
+			rtc@fc0686b0 {
+				compatible = "atmel,at91rm9200-rtc";
+				reg = <0xfc0686b0 0x30>;
+				interrupts = <1 IRQ_TYPE_LEVEL_HIGH 7>;
+				clocks = <&clk32k>;
+			};
+
+			dbgu: serial@fc069000 {
+				compatible = "atmel,at91sam9260-dbgu", "atmel,at91sam9260-usart";
+				reg = <0xfc069000 0x200>;
+				interrupts = <45 IRQ_TYPE_LEVEL_HIGH 7>;
+				pinctrl-names = "default";
+				pinctrl-0 = <&pinctrl_dbgu>;
+				clocks = <&dbgu_clk>;
+				clock-names = "usart";
+				status = "disabled";
+			};
+
+			pioA: gpio@fc06a000 {
+				compatible = "atmel,at91sam9x5-gpio", "atmel,at91rm9200-gpio";
+				reg = <0xfc06a000 0x100>;
+				interrupts = <23 IRQ_TYPE_LEVEL_HIGH 1>;
+				#gpio-cells = <2>;
+				gpio-controller;
+				interrupt-controller;
+				#interrupt-cells = <2>;
+				clocks = <&pioA_clk>;
+			};
+
+			pioB: gpio@fc06b000 {
+				compatible = "atmel,at91sam9x5-gpio", "atmel,at91rm9200-gpio";
+				reg = <0xfc06b000 0x100>;
+				interrupts = <24 IRQ_TYPE_LEVEL_HIGH 1>;
+				#gpio-cells = <2>;
+				gpio-controller;
+				interrupt-controller;
+				#interrupt-cells = <2>;
+				clocks = <&pioB_clk>;
+			};
+
+			pioC: gpio@fc06c000 {
+				compatible = "atmel,at91sam9x5-gpio", "atmel,at91rm9200-gpio";
+				reg = <0xfc06c000 0x100>;
+				interrupts = <25 IRQ_TYPE_LEVEL_HIGH 1>;
+				#gpio-cells = <2>;
+				gpio-controller;
+				interrupt-controller;
+				#interrupt-cells = <2>;
+				clocks = <&pioC_clk>;
+				u-boot,dm-pre-reloc;
+			};
+
+			pioD: gpio@fc068000 {
+				compatible = "atmel,at91sam9x5-gpio", "atmel,at91rm9200-gpio";
+				reg = <0xfc068000 0x100>;
+				interrupts = <5 IRQ_TYPE_LEVEL_HIGH 1>;
+				#gpio-cells = <2>;
+				gpio-controller;
+				interrupt-controller;
+				#interrupt-cells = <2>;
+				clocks = <&pioD_clk>;
+			};
+
+			pioE: gpio@fc06d000 {
+				compatible = "atmel,at91sam9x5-gpio", "atmel,at91rm9200-gpio";
+				reg = <0xfc06d000 0x100>;
+				interrupts = <26 IRQ_TYPE_LEVEL_HIGH 1>;
+				#gpio-cells = <2>;
+				gpio-controller;
+				interrupt-controller;
+				#interrupt-cells = <2>;
+				clocks = <&pioE_clk>;
+			};
+
+			pinctrl@fc06a000 {
+				u-boot,dm-pre-reloc;
+				#address-cells = <1>;
+				#size-cells = <1>;
+				compatible = "atmel,at91sam9x5-pinctrl", "atmel,at91rm9200-pinctrl", "simple-bus";
+				ranges = <0xfc068000 0xfc068000 0x100
+					  0xfc06a000 0xfc06a000 0x4000>;
+				/* WARNING: revisit as pin spec has changed */
+				atmel,mux-mask = <
+					/*   A          B          C  */
+					0xffffffff 0x3ffcfe7c 0x1c010101	/* pioA */
+					0x7fffffff 0xfffccc3a 0x3f00cc3a	/* pioB */
+					0xffffffff 0x3ff83fff 0xff00ffff	/* pioC */
+					0x0003ff00 0x8002a800 0x00000000	/* pioD */
+					0xffffffff 0x7fffffff 0x76fff1bf	/* pioE */
+					>;
+				reg = < 0xfc06a000 0x100
+					0xfc06b000 0x100
+					0xfc06c000 0x100
+					0xfc068000 0x100
+					0xfc06d000 0x100
+					>;
+
+				/* pinctrl pin settings */
+				adc0 {
+					pinctrl_adc0_adtrg: adc0_adtrg {
+						atmel,pins =
+							<AT91_PIOE 31 AT91_PERIPH_A AT91_PINCTRL_NONE>;	/* conflicts with USBA_VBUS */
+					};
+					pinctrl_adc0_ad0: adc0_ad0 {
+						atmel,pins =
+							<AT91_PIOC 27 AT91_PERIPH_A AT91_PINCTRL_NONE>;
+					};
+					pinctrl_adc0_ad1: adc0_ad1 {
+						atmel,pins =
+							<AT91_PIOC 28 AT91_PERIPH_A AT91_PINCTRL_NONE>;
+					};
+					pinctrl_adc0_ad2: adc0_ad2 {
+						atmel,pins =
+							<AT91_PIOC 29 AT91_PERIPH_A AT91_PINCTRL_NONE>;
+					};
+					pinctrl_adc0_ad3: adc0_ad3 {
+						atmel,pins =
+							<AT91_PIOC 30 AT91_PERIPH_A AT91_PINCTRL_NONE>;
+					};
+					pinctrl_adc0_ad4: adc0_ad4 {
+						atmel,pins =
+							<AT91_PIOC 31 AT91_PERIPH_A AT91_PINCTRL_NONE>;
+					};
+				};
+
+				dbgu {
+					pinctrl_dbgu: dbgu-0 {
+						atmel,pins =
+							<AT91_PIOB 24 AT91_PERIPH_A AT91_PINCTRL_NONE>,     /* conflicts with D14 and TDI */
+							<AT91_PIOB 25 AT91_PERIPH_A AT91_PINCTRL_PULL_UP>;  /* conflicts with D15 and TDO */
+					};
+				};
+
+				i2c0 {
+					pinctrl_i2c0: i2c0-0 {
+						atmel,pins =
+							<AT91_PIOA 30 AT91_PERIPH_A AT91_PINCTRL_NONE
+							 AT91_PIOA 31 AT91_PERIPH_A AT91_PINCTRL_NONE>;
+					};
+				};
+
+				i2c1 {
+					pinctrl_i2c1: i2c1-0 {
+						atmel,pins =
+							<AT91_PIOE 29 AT91_PERIPH_C AT91_PINCTRL_NONE	/* TWD1, conflicts with UART0 RX and DIBP */
+							 AT91_PIOE 30 AT91_PERIPH_C AT91_PINCTRL_NONE>;	/* TWCK1, conflicts with UART0 TX and DIBN */
+					};
+				};
+
+				i2c2 {
+					pinctrl_i2c2: i2c2-0 {
+						atmel,pins =
+							<AT91_PIOB 29 AT91_PERIPH_A AT91_PINCTRL_NONE	/* TWD2, conflicts with RD0 and PWML1 */
+							 AT91_PIOB 30 AT91_PERIPH_A AT91_PINCTRL_NONE>; /* TWCK2, conflicts with RF0 */
+					};
+				};
+
+				isi {
+					pinctrl_isi_data_0_7: isi-0-data-0-7 {
+						atmel,pins =
+							<AT91_PIOC 19 AT91_PERIPH_A AT91_PINCTRL_NONE	/* ISI_D0 */
+							 AT91_PIOC 20 AT91_PERIPH_A AT91_PINCTRL_NONE	/* ISI_D1 */
+							 AT91_PIOC 21 AT91_PERIPH_A AT91_PINCTRL_NONE	/* ISI_D2 */
+							 AT91_PIOC 22 AT91_PERIPH_A AT91_PINCTRL_NONE	/* ISI_D3 */
+							 AT91_PIOC 23 AT91_PERIPH_A AT91_PINCTRL_NONE	/* ISI_D4 */
+							 AT91_PIOC 24 AT91_PERIPH_A AT91_PINCTRL_NONE	/* ISI_D5 */
+							 AT91_PIOC 25 AT91_PERIPH_A AT91_PINCTRL_NONE	/* ISI_D6 */
+							 AT91_PIOC 26 AT91_PERIPH_A AT91_PINCTRL_NONE	/* ISI_D7 */
+							 AT91_PIOB  1 AT91_PERIPH_C AT91_PINCTRL_NONE	/* ISI_PCK, conflict with G0_RXCK */
+							 AT91_PIOB  3 AT91_PERIPH_C AT91_PINCTRL_NONE	/* ISI_VSYNC */
+							 AT91_PIOB  4 AT91_PERIPH_C AT91_PINCTRL_NONE>;	/* ISI_HSYNC */
+					};
+					pinctrl_isi_data_8_9: isi-0-data-8-9 {
+						atmel,pins =
+							<AT91_PIOC 0 AT91_PERIPH_C AT91_PINCTRL_NONE	/* ISI_D8, conflicts with SPI0_MISO, PWMH2 */
+							 AT91_PIOC 1 AT91_PERIPH_C AT91_PINCTRL_NONE>;	/* ISI_D9, conflicts with SPI0_MOSI, PWML2 */
+					};
+					pinctrl_isi_data_10_11: isi-0-data-10-11 {
+						atmel,pins =
+							<AT91_PIOC 2 AT91_PERIPH_C AT91_PINCTRL_NONE	/* ISI_D10, conflicts with SPI0_SPCK, PWMH3 */
+							 AT91_PIOC 3 AT91_PERIPH_C AT91_PINCTRL_NONE>;	/* ISI_D11, conflicts with SPI0_NPCS0, PWML3 */
+					};
+				};
+
+				lcd {
+					pinctrl_lcd_base: lcd-base-0 {
+						atmel,pins =
+							<AT91_PIOA 26 AT91_PERIPH_A AT91_PINCTRL_NONE	/* LCDVSYNC */
+							 AT91_PIOA 27 AT91_PERIPH_A AT91_PINCTRL_NONE	/* LCDHSYNC */
+							 AT91_PIOA 29 AT91_PERIPH_A AT91_PINCTRL_NONE	/* LCDDEN */
+							 AT91_PIOA 28 AT91_PERIPH_A AT91_PINCTRL_NONE>;	/* LCDPCK */
+					};
+					pinctrl_lcd_pwm: lcd-pwm-0 {
+						atmel,pins = <AT91_PIOA 24 AT91_PERIPH_A AT91_PINCTRL_NONE>;	/* LCDPWM */
+					};
+					pinctrl_lcd_rgb444: lcd-rgb-0 {
+						atmel,pins =
+							<AT91_PIOA 0 AT91_PERIPH_A AT91_PINCTRL_NONE	/* LCDD0 pin */
+							 AT91_PIOA 1 AT91_PERIPH_A AT91_PINCTRL_NONE	/* LCDD1 pin */
+							 AT91_PIOA 2 AT91_PERIPH_A AT91_PINCTRL_NONE	/* LCDD2 pin */
+							 AT91_PIOA 3 AT91_PERIPH_A AT91_PINCTRL_NONE	/* LCDD3 pin */
+							 AT91_PIOA 4 AT91_PERIPH_A AT91_PINCTRL_NONE	/* LCDD4 pin */
+							 AT91_PIOA 5 AT91_PERIPH_A AT91_PINCTRL_NONE	/* LCDD5 pin */
+							 AT91_PIOA 6 AT91_PERIPH_A AT91_PINCTRL_NONE	/* LCDD6 pin */
+							 AT91_PIOA 7 AT91_PERIPH_A AT91_PINCTRL_NONE	/* LCDD7 pin */
+							 AT91_PIOA 8 AT91_PERIPH_A AT91_PINCTRL_NONE	/* LCDD8 pin */
+							 AT91_PIOA 9 AT91_PERIPH_A AT91_PINCTRL_NONE	/* LCDD9 pin */
+							 AT91_PIOA 10 AT91_PERIPH_A AT91_PINCTRL_NONE	/* LCDD10 pin */
+							 AT91_PIOA 11 AT91_PERIPH_A AT91_PINCTRL_NONE>;	/* LCDD11 pin */
+					};
+					pinctrl_lcd_rgb565: lcd-rgb-1 {
+						atmel,pins =
+							<AT91_PIOA 0 AT91_PERIPH_A AT91_PINCTRL_NONE	/* LCDD0 pin */
+							 AT91_PIOA 1 AT91_PERIPH_A AT91_PINCTRL_NONE	/* LCDD1 pin */
+							 AT91_PIOA 2 AT91_PERIPH_A AT91_PINCTRL_NONE	/* LCDD2 pin */
+							 AT91_PIOA 3 AT91_PERIPH_A AT91_PINCTRL_NONE	/* LCDD3 pin */
+							 AT91_PIOA 4 AT91_PERIPH_A AT91_PINCTRL_NONE	/* LCDD4 pin */
+							 AT91_PIOA 5 AT91_PERIPH_A AT91_PINCTRL_NONE	/* LCDD5 pin */
+							 AT91_PIOA 6 AT91_PERIPH_A AT91_PINCTRL_NONE	/* LCDD6 pin */
+							 AT91_PIOA 7 AT91_PERIPH_A AT91_PINCTRL_NONE	/* LCDD7 pin */
+							 AT91_PIOA 8 AT91_PERIPH_A AT91_PINCTRL_NONE	/* LCDD8 pin */
+							 AT91_PIOA 9 AT91_PERIPH_A AT91_PINCTRL_NONE	/* LCDD9 pin */
+							 AT91_PIOA 10 AT91_PERIPH_A AT91_PINCTRL_NONE	/* LCDD10 pin */
+							 AT91_PIOA 11 AT91_PERIPH_A AT91_PINCTRL_NONE	/* LCDD11 pin */
+							 AT91_PIOA 12 AT91_PERIPH_A AT91_PINCTRL_NONE	/* LCDD12 pin */
+							 AT91_PIOA 13 AT91_PERIPH_A AT91_PINCTRL_NONE	/* LCDD13 pin */
+							 AT91_PIOA 14 AT91_PERIPH_A AT91_PINCTRL_NONE	/* LCDD14 pin */
+							 AT91_PIOA 15 AT91_PERIPH_A AT91_PINCTRL_NONE>;	/* LCDD15 pin */
+					};
+					pinctrl_lcd_rgb666: lcd-rgb-2 {
+						atmel,pins =
+							<AT91_PIOA 2 AT91_PERIPH_A AT91_PINCTRL_NONE	/* LCDD2 pin */
+							 AT91_PIOA 3 AT91_PERIPH_A AT91_PINCTRL_NONE	/* LCDD3 pin */
+							 AT91_PIOA 4 AT91_PERIPH_A AT91_PINCTRL_NONE	/* LCDD4 pin */
+							 AT91_PIOA 5 AT91_PERIPH_A AT91_PINCTRL_NONE	/* LCDD5 pin */
+							 AT91_PIOA 6 AT91_PERIPH_A AT91_PINCTRL_NONE	/* LCDD6 pin */
+							 AT91_PIOA 7 AT91_PERIPH_A AT91_PINCTRL_NONE	/* LCDD7 pin */
+							 AT91_PIOA 10 AT91_PERIPH_A AT91_PINCTRL_NONE	/* LCDD10 pin */
+							 AT91_PIOA 11 AT91_PERIPH_A AT91_PINCTRL_NONE	/* LCDD11 pin */
+							 AT91_PIOA 12 AT91_PERIPH_A AT91_PINCTRL_NONE	/* LCDD12 pin */
+							 AT91_PIOA 13 AT91_PERIPH_A AT91_PINCTRL_NONE	/* LCDD13 pin */
+							 AT91_PIOA 14 AT91_PERIPH_A AT91_PINCTRL_NONE	/* LCDD14 pin */
+							 AT91_PIOA 15 AT91_PERIPH_A AT91_PINCTRL_NONE	/* LCDD15 pin */
+							 AT91_PIOA 18 AT91_PERIPH_A AT91_PINCTRL_NONE	/* LCDD18 pin */
+							 AT91_PIOA 19 AT91_PERIPH_A AT91_PINCTRL_NONE	/* LCDD19 pin */
+							 AT91_PIOA 20 AT91_PERIPH_A AT91_PINCTRL_NONE	/* LCDD20 pin */
+							 AT91_PIOA 21 AT91_PERIPH_A AT91_PINCTRL_NONE	/* LCDD21 pin */
+							 AT91_PIOA 22 AT91_PERIPH_A AT91_PINCTRL_NONE	/* LCDD22 pin */
+							 AT91_PIOA 23 AT91_PERIPH_A AT91_PINCTRL_NONE>;	/* LCDD23 pin */
+					};
+					pinctrl_lcd_rgb777: lcd-rgb-3 {
+						atmel,pins =
+							 /* LCDDAT0 conflicts with TMS */
+							<AT91_PIOA 1 AT91_PERIPH_A AT91_PINCTRL_NONE	/* LCDD1 pin */
+							 AT91_PIOA 2 AT91_PERIPH_A AT91_PINCTRL_NONE	/* LCDD2 pin */
+							 AT91_PIOA 3 AT91_PERIPH_A AT91_PINCTRL_NONE	/* LCDD3 pin */
+							 AT91_PIOA 4 AT91_PERIPH_A AT91_PINCTRL_NONE	/* LCDD4 pin */
+							 AT91_PIOA 5 AT91_PERIPH_A AT91_PINCTRL_NONE	/* LCDD5 pin */
+							 AT91_PIOA 6 AT91_PERIPH_A AT91_PINCTRL_NONE	/* LCDD6 pin */
+							 AT91_PIOA 7 AT91_PERIPH_A AT91_PINCTRL_NONE	/* LCDD7 pin */
+							 /* LCDDAT8 conflicts with TCK */
+							 AT91_PIOA 9 AT91_PERIPH_A AT91_PINCTRL_NONE	/* LCDD9 pin */
+							 AT91_PIOA 10 AT91_PERIPH_A AT91_PINCTRL_NONE	/* LCDD10 pin */
+							 AT91_PIOA 11 AT91_PERIPH_A AT91_PINCTRL_NONE	/* LCDD11 pin */
+							 AT91_PIOA 12 AT91_PERIPH_A AT91_PINCTRL_NONE	/* LCDD12 pin */
+							 AT91_PIOA 13 AT91_PERIPH_A AT91_PINCTRL_NONE	/* LCDD13 pin */
+							 AT91_PIOA 14 AT91_PERIPH_A AT91_PINCTRL_NONE	/* LCDD14 pin */
+							 AT91_PIOA 15 AT91_PERIPH_A AT91_PINCTRL_NONE	/* LCDD15 pin */
+							 /* LCDDAT16 conflicts with NTRST */
+							 AT91_PIOA 17 AT91_PERIPH_A AT91_PINCTRL_NONE	/* LCDD17 pin */
+							 AT91_PIOA 18 AT91_PERIPH_A AT91_PINCTRL_NONE	/* LCDD18 pin */
+							 AT91_PIOA 19 AT91_PERIPH_A AT91_PINCTRL_NONE	/* LCDD19 pin */
+							 AT91_PIOA 20 AT91_PERIPH_A AT91_PINCTRL_NONE	/* LCDD20 pin */
+							 AT91_PIOA 21 AT91_PERIPH_A AT91_PINCTRL_NONE	/* LCDD21 pin */
+							 AT91_PIOA 22 AT91_PERIPH_A AT91_PINCTRL_NONE	/* LCDD22 pin */
+							 AT91_PIOA 23 AT91_PERIPH_A AT91_PINCTRL_NONE>;	/* LCDD23 pin */
+					};
+					pinctrl_lcd_rgb888: lcd-rgb-4 {
+						atmel,pins =
+							<AT91_PIOA 0 AT91_PERIPH_A AT91_PINCTRL_NONE	/* LCDD0 pin */
+							 AT91_PIOA 1 AT91_PERIPH_A AT91_PINCTRL_NONE	/* LCDD1 pin */
+							 AT91_PIOA 2 AT91_PERIPH_A AT91_PINCTRL_NONE	/* LCDD2 pin */
+							 AT91_PIOA 3 AT91_PERIPH_A AT91_PINCTRL_NONE	/* LCDD3 pin */
+							 AT91_PIOA 4 AT91_PERIPH_A AT91_PINCTRL_NONE	/* LCDD4 pin */
+							 AT91_PIOA 5 AT91_PERIPH_A AT91_PINCTRL_NONE	/* LCDD5 pin */
+							 AT91_PIOA 6 AT91_PERIPH_A AT91_PINCTRL_NONE	/* LCDD6 pin */
+							 AT91_PIOA 7 AT91_PERIPH_A AT91_PINCTRL_NONE	/* LCDD7 pin */
+							 AT91_PIOA 8 AT91_PERIPH_A AT91_PINCTRL_NONE	/* LCDD8 pin */
+							 AT91_PIOA 9 AT91_PERIPH_A AT91_PINCTRL_NONE	/* LCDD9 pin */
+							 AT91_PIOA 10 AT91_PERIPH_A AT91_PINCTRL_NONE	/* LCDD10 pin */
+							 AT91_PIOA 11 AT91_PERIPH_A AT91_PINCTRL_NONE	/* LCDD11 pin */
+							 AT91_PIOA 12 AT91_PERIPH_A AT91_PINCTRL_NONE	/* LCDD12 pin */
+							 AT91_PIOA 13 AT91_PERIPH_A AT91_PINCTRL_NONE	/* LCDD13 pin */
+							 AT91_PIOA 14 AT91_PERIPH_A AT91_PINCTRL_NONE	/* LCDD14 pin */
+							 AT91_PIOA 15 AT91_PERIPH_A AT91_PINCTRL_NONE	/* LCDD15 pin */
+							 AT91_PIOA 16 AT91_PERIPH_A AT91_PINCTRL_NONE	/* LCDD16 pin */
+							 AT91_PIOA 17 AT91_PERIPH_A AT91_PINCTRL_NONE	/* LCDD17 pin */
+							 AT91_PIOA 18 AT91_PERIPH_A AT91_PINCTRL_NONE	/* LCDD18 pin */
+							 AT91_PIOA 19 AT91_PERIPH_A AT91_PINCTRL_NONE	/* LCDD19 pin */
+							 AT91_PIOA 20 AT91_PERIPH_A AT91_PINCTRL_NONE	/* LCDD20 pin */
+							 AT91_PIOA 21 AT91_PERIPH_A AT91_PINCTRL_NONE	/* LCDD21 pin */
+							 AT91_PIOA 22 AT91_PERIPH_A AT91_PINCTRL_NONE	/* LCDD22 pin */
+							 AT91_PIOA 23 AT91_PERIPH_A AT91_PINCTRL_NONE>;	/* LCDD23 pin */
+					};
+				};
+
+				macb0 {
+					pinctrl_macb0_rmii: macb0_rmii-0 {
+						atmel,pins =
+							<AT91_PIOB 12 AT91_PERIPH_A AT91_PINCTRL_NONE	/* G0_TX0 */
+							 AT91_PIOB 13 AT91_PERIPH_A AT91_PINCTRL_NONE	/* G0_TX1 */
+							 AT91_PIOB  8 AT91_PERIPH_A AT91_PINCTRL_NONE	/* G0_RX0 */
+							 AT91_PIOB  9 AT91_PERIPH_A AT91_PINCTRL_NONE	/* G0_RX1 */
+							 AT91_PIOB  6 AT91_PERIPH_A AT91_PINCTRL_NONE	/* G0_RXDV */
+							 AT91_PIOB  7 AT91_PERIPH_A AT91_PINCTRL_NONE	/* G0_RXER */
+							 AT91_PIOB  2 AT91_PERIPH_A AT91_PINCTRL_NONE	/* G0_TXEN */
+							 AT91_PIOB  0 AT91_PERIPH_A AT91_PINCTRL_NONE	/* G0_TXCK */
+							 AT91_PIOB 16 AT91_PERIPH_A AT91_PINCTRL_NONE	/* G0_MDC */
+							 AT91_PIOB 17 AT91_PERIPH_A AT91_PINCTRL_NONE	/* G0_MDIO */
+							>;
+					};
+				};
+
+				macb1 {
+					pinctrl_macb1_rmii: macb1_rmii-0 {
+						atmel,pins =
+							<AT91_PIOA 14 AT91_PERIPH_B AT91_PINCTRL_NONE	/* G1_TX0 */
+							 AT91_PIOA 15 AT91_PERIPH_B AT91_PINCTRL_NONE	/* G1_TX1 */
+							 AT91_PIOA 12 AT91_PERIPH_B AT91_PINCTRL_NONE	/* G1_RX0 */
+							 AT91_PIOA 13 AT91_PERIPH_B AT91_PINCTRL_NONE	/* G1_RX1 */
+							 AT91_PIOA 10 AT91_PERIPH_B AT91_PINCTRL_NONE	/* G1_RXDV */
+							 AT91_PIOA 11 AT91_PERIPH_B AT91_PINCTRL_NONE	/* G1_RXER */
+							 AT91_PIOA  4 AT91_PERIPH_B AT91_PINCTRL_NONE	/* G1_TXEN */
+							 AT91_PIOA  2 AT91_PERIPH_B AT91_PINCTRL_NONE	/* G1_TXCK */
+							 AT91_PIOA 22 AT91_PERIPH_B AT91_PINCTRL_NONE	/* G1_MDC */
+							 AT91_PIOA 23 AT91_PERIPH_B AT91_PINCTRL_NONE	/* G1_MDIO */
+							>;
+					};
+				};
+
+				mmc0 {
+					pinctrl_mmc0_clk_cmd_dat0: mmc0_clk_cmd_dat0 {
+						atmel,pins =
+							<AT91_PIOC 4 AT91_PERIPH_B AT91_PINCTRL_NONE	/* MCI0_CK, conflict with PCK1(ISI_MCK) */
+							 AT91_PIOC 5 AT91_PERIPH_B AT91_PINCTRL_PULL_UP	/* MCI0_CDA, conflict with NAND_D0 */
+							 AT91_PIOC 6 AT91_PERIPH_B AT91_PINCTRL_PULL_UP	/* MCI0_DA0, conflict with NAND_D1 */
+							>;
+					};
+					pinctrl_mmc0_dat1_3: mmc0_dat1_3 {
+						atmel,pins =
+							<AT91_PIOC 7 AT91_PERIPH_B AT91_PINCTRL_PULL_UP	/* MCI0_DA1, conflict with NAND_D2 */
+							 AT91_PIOC 8 AT91_PERIPH_B AT91_PINCTRL_PULL_UP	/* MCI0_DA2, conflict with NAND_D3 */
+							 AT91_PIOC 9 AT91_PERIPH_B AT91_PINCTRL_PULL_UP	/* MCI0_DA3, conflict with NAND_D4 */
+							>;
+					};
+					pinctrl_mmc0_dat4_7: mmc0_dat4_7 {
+						atmel,pins =
+							<AT91_PIOC 10 AT91_PERIPH_B AT91_PINCTRL_PULL_UP	/* MCI0_DA4, conflict with NAND_D5 */
+							 AT91_PIOC 11 AT91_PERIPH_B AT91_PINCTRL_PULL_UP	/* MCI0_DA5, conflict with NAND_D6 */
+							 AT91_PIOC 12 AT91_PERIPH_B AT91_PINCTRL_PULL_UP	/* MCI0_DA6, conflict with NAND_D7 */
+							 AT91_PIOC 13 AT91_PERIPH_B AT91_PINCTRL_PULL_UP	/* MCI0_DA7, conflict with NAND_OE */
+							>;
+					};
+				};
+
+				mmc1 {
+					u-boot,dm-pre-reloc;
+					pinctrl_mmc1_clk_cmd_dat0: mmc1_clk_cmd_dat0 {
+						u-boot,dm-pre-reloc;
+						atmel,pins =
+							<AT91_PIOE 18 AT91_PERIPH_C AT91_PINCTRL_NONE		/* MCI1_CK */
+							 AT91_PIOE 19 AT91_PERIPH_C AT91_PINCTRL_PULL_UP	/* MCI1_CDA */
+							 AT91_PIOE 20 AT91_PERIPH_C AT91_PINCTRL_PULL_UP	/* MCI1_DA0 */
+							>;
+					};
+					pinctrl_mmc1_dat1_3: mmc1_dat1_3 {
+						u-boot,dm-pre-reloc;
+						atmel,pins =
+							<AT91_PIOE 21 AT91_PERIPH_C AT91_PINCTRL_PULL_UP	/* MCI1_DA1 */
+							 AT91_PIOE 22 AT91_PERIPH_C AT91_PINCTRL_PULL_UP	/* MCI1_DA2 */
+							 AT91_PIOE 23 AT91_PERIPH_C AT91_PINCTRL_PULL_UP	/* MCI1_DA3 */
+							>;
+					};
+				};
+
+				nand0 {
+					pinctrl_nand: nand-0 {
+						atmel,pins =
+							<AT91_PIOC 13 AT91_PERIPH_A AT91_PINCTRL_NONE	/* PC13 periph A Read Enable */
+							 AT91_PIOC 14 AT91_PERIPH_A AT91_PINCTRL_NONE	/* PC14 periph A Write Enable */
+
+							 AT91_PIOC 17 AT91_PERIPH_A AT91_PINCTRL_PULL_UP	/* PC17 ALE */
+							 AT91_PIOC 18 AT91_PERIPH_A AT91_PINCTRL_PULL_UP	/* PC18 CLE */
+
+							 AT91_PIOC 15 AT91_PERIPH_A AT91_PINCTRL_PULL_UP	/* PC15 NCS3/Chip Enable */
+							 AT91_PIOC 16 AT91_PERIPH_A AT91_PINCTRL_PULL_UP	/* PC16 NANDRDY */
+							 AT91_PIOC 5 AT91_PERIPH_A AT91_PINCTRL_NONE	/* PC5 Data bit 0 */
+							 AT91_PIOC 6 AT91_PERIPH_A AT91_PINCTRL_NONE	/* PC6 Data bit 1 */
+							 AT91_PIOC 7 AT91_PERIPH_A AT91_PINCTRL_NONE	/* PC7 Data bit 2 */
+							 AT91_PIOC 8 AT91_PERIPH_A AT91_PINCTRL_NONE	/* PC8 Data bit 3 */
+							 AT91_PIOC 9 AT91_PERIPH_A AT91_PINCTRL_NONE	/* PC9 Data bit 4 */
+							 AT91_PIOC 10 AT91_PERIPH_A AT91_PINCTRL_NONE	/* PC10 Data bit 5 */
+							 AT91_PIOC 11 AT91_PERIPH_A AT91_PINCTRL_NONE	/* PC11 periph A Data bit 6 */
+							 AT91_PIOC 12 AT91_PERIPH_A AT91_PINCTRL_NONE>;	/* PC12 periph A Data bit 7 */
+					};
+				};
+
+				spi0 {
+					u-boot,dm-pre-reloc;
+					pinctrl_spi0: spi0-0 {
+						u-boot,dm-pre-reloc;
+						atmel,pins =
+							<AT91_PIOC 0 AT91_PERIPH_A AT91_PINCTRL_NONE	/* SPI0_MISO */
+							 AT91_PIOC 1 AT91_PERIPH_A AT91_PINCTRL_NONE	/* SPI0_MOSI */
+							 AT91_PIOC 2 AT91_PERIPH_A AT91_PINCTRL_NONE	/* SPI0_SPCK */
+							>;
+					};
+				};
+
+				ssc0 {
+					pinctrl_ssc0_tx: ssc0_tx {
+						atmel,pins =
+							<AT91_PIOB 27 AT91_PERIPH_B AT91_PINCTRL_NONE	/* TK0 */
+							 AT91_PIOB 31 AT91_PERIPH_B AT91_PINCTRL_NONE	/* TF0 */
+							 AT91_PIOB 28 AT91_PERIPH_B AT91_PINCTRL_NONE>;	/* TD0 */
+					};
+
+					pinctrl_ssc0_rx: ssc0_rx {
+						atmel,pins =
+							<AT91_PIOB 26 AT91_PERIPH_B AT91_PINCTRL_NONE	/* RK0 */
+							 AT91_PIOB 30 AT91_PERIPH_B AT91_PINCTRL_NONE	/* RF0 */
+							 AT91_PIOB 29 AT91_PERIPH_B AT91_PINCTRL_NONE>;	/* RD0 */
+					};
+				};
+
+				ssc1 {
+					pinctrl_ssc1_tx: ssc1_tx {
+						atmel,pins =
+							<AT91_PIOC 19 AT91_PERIPH_B AT91_PINCTRL_NONE	/* TK1 */
+							 AT91_PIOC 20 AT91_PERIPH_B AT91_PINCTRL_NONE	/* TF1 */
+							 AT91_PIOC 21 AT91_PERIPH_B AT91_PINCTRL_NONE>;	/* TD1 */
+					};
+
+					pinctrl_ssc1_rx: ssc1_rx {
+						atmel,pins =
+							<AT91_PIOC 24 AT91_PERIPH_B AT91_PINCTRL_NONE	/* RK1 */
+							 AT91_PIOC 22 AT91_PERIPH_B AT91_PINCTRL_NONE	/* RF1 */
+							 AT91_PIOC 23 AT91_PERIPH_B AT91_PINCTRL_NONE>;	/* RD1 */
+					};
+				};
+
+				spi1 {
+					pinctrl_spi1: spi1-0 {
+						atmel,pins =
+							<AT91_PIOB 18 AT91_PERIPH_A AT91_PINCTRL_NONE	/* SPI1_MISO */
+							 AT91_PIOB 19 AT91_PERIPH_A AT91_PINCTRL_NONE	/* SPI1_MOSI */
+							 AT91_PIOB 20 AT91_PERIPH_A AT91_PINCTRL_NONE	/* SPI1_SPCK */
+							>;
+					};
+				};
+
+				spi2 {
+					pinctrl_spi2: spi2-0 {
+						atmel,pins =
+							<AT91_PIOD 11 AT91_PERIPH_B AT91_PINCTRL_NONE	/* SPI2_MISO conflicts with RTS0 */
+							 AT91_PIOD 13 AT91_PERIPH_B AT91_PINCTRL_NONE	/* SPI2_MOSI conflicts with TXD0 */
+							 AT91_PIOD 15 AT91_PERIPH_B AT91_PINCTRL_NONE	/* SPI2_SPCK conflicts with RTS1 */
+							>;
+					};
+				};
+
+				uart0 {
+					pinctrl_uart0: uart0-0 {
+						atmel,pins =
+							<AT91_PIOE 29 AT91_PERIPH_B AT91_PINCTRL_NONE		/* RXD */
+							 AT91_PIOE 30 AT91_PERIPH_B AT91_PINCTRL_PULL_UP	/* TXD */
+							>;
+					};
+				};
+
+				uart1 {
+					pinctrl_uart1: uart1-0 {
+						atmel,pins =
+							<AT91_PIOC 25 AT91_PERIPH_C AT91_PINCTRL_NONE		/* RXD */
+							 AT91_PIOC 26 AT91_PERIPH_C AT91_PINCTRL_PULL_UP	/* TXD */
+							>;
+					};
+				};
+
+				usart0 {
+					pinctrl_usart0: usart0-0 {
+						atmel,pins =
+							<AT91_PIOD 12 AT91_PERIPH_A AT91_PINCTRL_NONE		/* RXD */
+							 AT91_PIOD 13 AT91_PERIPH_A AT91_PINCTRL_PULL_UP	/* TXD */
+							>;
+					};
+					pinctrl_usart0_rts: usart0_rts-0 {
+						atmel,pins = <AT91_PIOD 11 AT91_PERIPH_A AT91_PINCTRL_NONE>;
+					};
+					pinctrl_usart0_cts: usart0_cts-0 {
+						atmel,pins = <AT91_PIOD 10 AT91_PERIPH_A AT91_PINCTRL_NONE>;
+					};
+				};
+
+				usart1 {
+					pinctrl_usart1: usart1-0 {
+						atmel,pins =
+							<AT91_PIOD 16 AT91_PERIPH_A AT91_PINCTRL_NONE		/* RXD */
+							 AT91_PIOD 17 AT91_PERIPH_A AT91_PINCTRL_PULL_UP	/* TXD */
+							>;
+					};
+					pinctrl_usart1_rts: usart1_rts-0 {
+						atmel,pins = <AT91_PIOD 15 AT91_PERIPH_A AT91_PINCTRL_NONE>;
+					};
+					pinctrl_usart1_cts: usart1_cts-0 {
+						atmel,pins = <AT91_PIOD 14 AT91_PERIPH_A AT91_PINCTRL_NONE>;
+					};
+				};
+
+				usart2 {
+					pinctrl_usart2: usart2-0 {
+						atmel,pins =
+							<AT91_PIOB 4 AT91_PERIPH_B AT91_PINCTRL_NONE		/* RXD - conflicts with G0_CRS, ISI_HSYNC */
+							 AT91_PIOB 5 AT91_PERIPH_B AT91_PINCTRL_PULL_UP		/* TXD - conflicts with G0_COL, PCK2 */
+							>;
+					};
+					pinctrl_usart2_rts: usart2_rts-0 {
+						atmel,pins = <AT91_PIOB 11 AT91_PERIPH_B AT91_PINCTRL_NONE>;	/* conflicts with G0_RX3, PWMH1 */
+					};
+					pinctrl_usart2_cts: usart2_cts-0 {
+						atmel,pins = <AT91_PIOB 3 AT91_PERIPH_B AT91_PINCTRL_NONE>;	/* conflicts with G0_TXER, ISI_VSYNC */
+					};
+				};
+
+				usart3 {
+					u-boot,dm-pre-reloc;
+					pinctrl_usart3: usart3-0 {
+						u-boot,dm-pre-reloc;
+						atmel,pins =
+							<AT91_PIOE 16 AT91_PERIPH_B AT91_PINCTRL_NONE		/* RXD */
+							 AT91_PIOE 17 AT91_PERIPH_B AT91_PINCTRL_PULL_UP	/* TXD */
+							>;
+					};
+				};
+
+				usart4 {
+					pinctrl_usart4: usart4-0 {
+						atmel,pins =
+							<AT91_PIOE 26 AT91_PERIPH_B AT91_PINCTRL_NONE		/* RXD */
+							 AT91_PIOE 27 AT91_PERIPH_B AT91_PINCTRL_PULL_UP	/* TXD */
+							>;
+					};
+					pinctrl_usart4_rts: usart4_rts-0 {
+						atmel,pins = <AT91_PIOE 28 AT91_PERIPH_B AT91_PINCTRL_NONE>;	/* conflicts with NWAIT, A19 */
+					};
+					pinctrl_usart4_cts: usart4_cts-0 {
+						atmel,pins = <AT91_PIOE 0 AT91_PERIPH_C AT91_PINCTRL_NONE>;	/* conflicts with A0/NBS0, MCI0_CDB */
+					};
+				};
+			};
+
+			aic: interrupt-controller@fc06e000 {
+				#interrupt-cells = <3>;
+				compatible = "atmel,sama5d4-aic";
+				interrupt-controller;
+				reg = <0xfc06e000 0x200>;
+				atmel,external-irqs = <56>;
+			};
+		};
+	};
+};