diff --git a/arch/arm/cpu/arm1136/mx35/generic.c b/arch/arm/cpu/arm1136/mx35/generic.c
index d11e6f6..46f4b64 100644
--- a/arch/arm/cpu/arm1136/mx35/generic.c
+++ b/arch/arm/cpu/arm1136/mx35/generic.c
@@ -519,7 +519,7 @@
 		case RCSR_MEM_TYPE_NOR:
 			return BOOT_DEVICE_NOR;
 		case RCSR_MEM_TYPE_ONENAND:
-			return BOOT_DEVICE_ONE_NAND;
+			return BOOT_DEVICE_ONENAND;
 		default:
 			return BOOT_DEVICE_NONE;
 		}
diff --git a/arch/arm/cpu/arm720t/tegra114/cpu.c b/arch/arm/cpu/arm720t/tegra114/cpu.c
index 5962e15..6a94179 100644
--- a/arch/arm/cpu/arm720t/tegra114/cpu.c
+++ b/arch/arm/cpu/arm720t/tegra114/cpu.c
@@ -201,6 +201,7 @@
 	reset_set_enable(PERIPH_ID_MSELECT, 0);
 	reset_set_enable(PERIPH_ID_EMC1, 0);
 	reset_set_enable(PERIPH_ID_MC1, 0);
+	reset_set_enable(PERIPH_ID_DVFS, 0);
 
 	debug("t114_init_clocks exit\n");
 }
@@ -269,6 +270,8 @@
 
 void start_cpu(u32 reset_vector)
 {
+	u32 imme, inst;
+
 	debug("start_cpu entry, reset_vector = %x\n", reset_vector);
 
 	t114_init_clocks();
@@ -285,12 +288,38 @@
 	/* Take CPU(s) out of reset */
 	remove_cpu_resets();
 
+	/* Set the entry point for CPU execution from reset */
+
 	/*
-	 * Set the entry point for CPU execution from reset,
-	 *  if it's a non-zero value.
+	 * A01P with patched boot ROM; vector hard-coded to 0x4003fffc.
+	 * See nvbug 1193357 for details.
 	 */
-	if (reset_vector)
-		writel(reset_vector, EXCEP_VECTOR_CPU_RESET_VECTOR);
+
+	/* mov r0, #lsb(reset_vector) */
+	imme = reset_vector & 0xffff;
+	inst = imme & 0xfff;
+	inst |= ((imme >> 12) << 16);
+	inst |= 0xe3000000;
+	writel(inst, 0x4003fff0);
+
+	/* movt r0, #msb(reset_vector) */
+	imme = (reset_vector >> 16) & 0xffff;
+	inst = imme & 0xfff;
+	inst |= ((imme >> 12) << 16);
+	inst |= 0xe3400000;
+	writel(inst, 0x4003fff4);
+
+	/* bx r0 */
+	writel(0xe12fff10, 0x4003fff8);
+
+	/* b -12 */
+	imme = (u32)-20;
+	inst = (imme >> 2) & 0xffffff;
+	inst |= 0xea000000;
+	writel(inst, 0x4003fffc);
+
+	/* Write to orignal location for compatibility */
+	writel(reset_vector, EXCEP_VECTOR_CPU_RESET_VECTOR);
 
 	/* If the CPU(s) don't already have power, power 'em up */
 	powerup_cpus();
diff --git a/arch/arm/cpu/arm920t/ep93xx/u-boot.lds b/arch/arm/cpu/arm920t/ep93xx/u-boot.lds
index 25d2a32..e483820 100644
--- a/arch/arm/cpu/arm920t/ep93xx/u-boot.lds
+++ b/arch/arm/cpu/arm920t/ep93xx/u-boot.lds
@@ -51,7 +51,7 @@
 
 	. = ALIGN(4);
 	.u_boot_list : {
-	#include <u-boot.lst>
+		KEEP(*(SORT(.u_boot_list*)));
 	}
 
 	. = ALIGN(4);
diff --git a/arch/arm/cpu/arm926ejs/at91/at91sam9x5_devices.c b/arch/arm/cpu/arm926ejs/at91/at91sam9x5_devices.c
index 0448c0b..9218546 100644
--- a/arch/arm/cpu/arm926ejs/at91/at91sam9x5_devices.c
+++ b/arch/arm/cpu/arm926ejs/at91/at91sam9x5_devices.c
@@ -61,20 +61,20 @@
 	if (cpu_is_at91sam9x5()) {
 		switch (extension_id) {
 		case ARCH_EXID_AT91SAM9G15:
-			return CONFIG_SYS_AT91_G15_CPU_NAME;
+			return "AT91SAM9G15";
 		case ARCH_EXID_AT91SAM9G25:
-			return CONFIG_SYS_AT91_G25_CPU_NAME;
+			return "AT91SAM9G25";
 		case ARCH_EXID_AT91SAM9G35:
-			return CONFIG_SYS_AT91_G35_CPU_NAME;
+			return "AT91SAM9G35";
 		case ARCH_EXID_AT91SAM9X25:
-			return CONFIG_SYS_AT91_X25_CPU_NAME;
+			return "AT91SAM9X25";
 		case ARCH_EXID_AT91SAM9X35:
-			return CONFIG_SYS_AT91_X35_CPU_NAME;
+			return "AT91SAM9X35";
 		default:
-			return CONFIG_SYS_AT91_UNKNOWN_CPU;
+			return "Unknown CPU type";
 		}
 	} else {
-		return CONFIG_SYS_AT91_UNKNOWN_CPU;
+		return "Unknown CPU type";
 	}
 }
 
@@ -246,14 +246,14 @@
 #ifndef CONFIG_RMII
 	/* Only emac0 support MII */
 	if (has_emac0()) {
-		at91_set_b_periph(AT91_PIO_PORTB, 16, 0);	/* ECRS */
-		at91_set_b_periph(AT91_PIO_PORTB, 17, 0);	/* ECOL */
-		at91_set_b_periph(AT91_PIO_PORTB, 13, 0);	/* ERX2 */
-		at91_set_b_periph(AT91_PIO_PORTB, 14, 0);	/* ERX3 */
-		at91_set_b_periph(AT91_PIO_PORTB, 15, 0);	/* ERXCK */
-		at91_set_b_periph(AT91_PIO_PORTB, 11, 0);	/* ETX2 */
-		at91_set_b_periph(AT91_PIO_PORTB, 12, 0);	/* ETX3 */
-		at91_set_b_periph(AT91_PIO_PORTB, 8, 0);	/* ETXER */
+		at91_set_a_periph(AT91_PIO_PORTB, 16, 0);	/* ECRS */
+		at91_set_a_periph(AT91_PIO_PORTB, 17, 0);	/* ECOL */
+		at91_set_a_periph(AT91_PIO_PORTB, 13, 0);	/* ERX2 */
+		at91_set_a_periph(AT91_PIO_PORTB, 14, 0);	/* ERX3 */
+		at91_set_a_periph(AT91_PIO_PORTB, 15, 0);	/* ERXCK */
+		at91_set_a_periph(AT91_PIO_PORTB, 11, 0);	/* ETX2 */
+		at91_set_a_periph(AT91_PIO_PORTB, 12, 0);	/* ETX3 */
+		at91_set_a_periph(AT91_PIO_PORTB, 8, 0);	/* ETXER */
 	}
 #endif
 }
diff --git a/arch/arm/cpu/arm926ejs/config.mk b/arch/arm/cpu/arm926ejs/config.mk
index 47f24f5..6a3a1bb 100644
--- a/arch/arm/cpu/arm926ejs/config.mk
+++ b/arch/arm/cpu/arm926ejs/config.mk
@@ -34,6 +34,6 @@
 
 ifneq ($(CONFIG_IMX_CONFIG),)
 
-ALL-y	+= $(OBJTREE)/u-boot.imx
+ALL-y	+= $(obj)u-boot.imx
 
 endif
diff --git a/arch/arm/cpu/arm926ejs/mxs/clock.c b/arch/arm/cpu/arm926ejs/mxs/clock.c
index 00b9aba..43e7663 100644
--- a/arch/arm/cpu/arm926ejs/mxs/clock.c
+++ b/arch/arm/cpu/arm926ejs/mxs/clock.c
@@ -289,7 +289,8 @@
 void mxs_set_ssp_busclock(unsigned int bus, uint32_t freq)
 {
 	struct mxs_ssp_regs *ssp_regs;
-	const uint32_t sspclk = mxs_get_sspclk(bus);
+	const enum mxs_sspclock clk = mxs_ssp_clock_by_bus(bus);
+	const uint32_t sspclk = mxs_get_sspclk(clk);
 	uint32_t reg;
 	uint32_t divide, rate, tgtclk;
 
diff --git a/arch/arm/cpu/arm926ejs/mxs/mxs_init.h b/arch/arm/cpu/arm926ejs/mxs/mxs_init.h
index 2ddc5bc..084def5 100644
--- a/arch/arm/cpu/arm926ejs/mxs/mxs_init.h
+++ b/arch/arm/cpu/arm926ejs/mxs/mxs_init.h
@@ -30,7 +30,7 @@
 
 void mxs_power_init(void);
 
-#ifdef	CONFIG_SPL_MX28_PSWITCH_WAIT
+#ifdef	CONFIG_SPL_MXS_PSWITCH_WAIT
 void mxs_power_wait_pswitch(void);
 #else
 static inline void mxs_power_wait_pswitch(void) { }
diff --git a/arch/arm/cpu/arm926ejs/mxs/spl_mem_init.c b/arch/arm/cpu/arm926ejs/mxs/spl_mem_init.c
index f8392f6..fdac73c 100644
--- a/arch/arm/cpu/arm926ejs/mxs/spl_mem_init.c
+++ b/arch/arm/cpu/arm926ejs/mxs/spl_mem_init.c
@@ -27,6 +27,7 @@
 #include <config.h>
 #include <asm/io.h>
 #include <asm/arch/imx-regs.h>
+#include <asm/arch/sys_proto.h>
 #include <linux/compiler.h>
 
 #include "mxs_init.h"
@@ -119,6 +120,10 @@
 		writel(dram_vals[i], MXS_DRAM_BASE + (4 * i));
 
 #ifdef CONFIG_MX23
+	/*
+	 * Enable tRAS lockout in HW_DRAM_CTL08 ; it must be the last
+	 * element to be set
+	 */
 	writel((1 << 24), MXS_DRAM_BASE + (4 * 8));
 #endif
 }
@@ -229,7 +234,7 @@
 	struct mxs_power_regs *power_regs =
 		(struct mxs_power_regs *)MXS_POWER_BASE;
 
-	writel((0x12 << POWER_VDDMEMCTRL_TRG_OFFSET) |
+	writel((0x10 << POWER_VDDMEMCTRL_TRG_OFFSET) |
 		POWER_VDDMEMCTRL_ENABLE_ILIMIT |
 		POWER_VDDMEMCTRL_ENABLE_LINREG |
 		POWER_VDDMEMCTRL_PULLDOWN_ACTIVE,
@@ -237,13 +242,20 @@
 
 	early_delay(10000);
 
-	writel((0x12 << POWER_VDDMEMCTRL_TRG_OFFSET) |
+	writel((0x10 << POWER_VDDMEMCTRL_TRG_OFFSET) |
 		POWER_VDDMEMCTRL_ENABLE_LINREG,
 		&power_regs->hw_power_vddmemctrl);
 }
 
 static void mx23_mem_init(void)
 {
+	/*
+	 * Reset/ungate the EMI block. This is essential, otherwise the system
+	 * suffers from memory instability. This thing is mx23 specific and is
+	 * no longer present on mx28.
+	 */
+	mxs_reset_block((struct mxs_register_32 *)MXS_EMI_BASE);
+
 	mx23_mem_setup_vddmem();
 
 	/*
diff --git a/arch/arm/cpu/arm926ejs/mxs/spl_power_init.c b/arch/arm/cpu/arm926ejs/mxs/spl_power_init.c
index e9d6302..287c698 100644
--- a/arch/arm/cpu/arm926ejs/mxs/spl_power_init.c
+++ b/arch/arm/cpu/arm926ejs/mxs/spl_power_init.c
@@ -921,7 +921,7 @@
 	early_delay(1000);
 }
 
-#ifdef	CONFIG_SPL_MX28_PSWITCH_WAIT
+#ifdef	CONFIG_SPL_MXS_PSWITCH_WAIT
 void mxs_power_wait_pswitch(void)
 {
 	struct mxs_power_regs *power_regs =
diff --git a/arch/arm/cpu/arm926ejs/mxs/timer.c b/arch/arm/cpu/arm926ejs/mxs/timer.c
index 3738411..2039106 100644
--- a/arch/arm/cpu/arm926ejs/mxs/timer.c
+++ b/arch/arm/cpu/arm926ejs/mxs/timer.c
@@ -32,7 +32,11 @@
 #include <asm/arch/sys_proto.h>
 
 /* Maximum fixed count */
-#define TIMER_LOAD_VAL	0xffffffff
+#if defined(CONFIG_MX23)
+#define TIMER_LOAD_VAL 0xffff
+#elif defined(CONFIG_MX28)
+#define TIMER_LOAD_VAL 0xffffffff
+#endif
 
 DECLARE_GLOBAL_DATA_PTR;
 
@@ -42,22 +46,22 @@
 /*
  * This driver uses 1kHz clock source.
  */
-#define	MX28_INCREMENTER_HZ		1000
+#define	MXS_INCREMENTER_HZ		1000
 
 static inline unsigned long tick_to_time(unsigned long tick)
 {
-	return tick / (MX28_INCREMENTER_HZ / CONFIG_SYS_HZ);
+	return tick / (MXS_INCREMENTER_HZ / CONFIG_SYS_HZ);
 }
 
 static inline unsigned long time_to_tick(unsigned long time)
 {
-	return time * (MX28_INCREMENTER_HZ / CONFIG_SYS_HZ);
+	return time * (MXS_INCREMENTER_HZ / CONFIG_SYS_HZ);
 }
 
 /* Calculate how many ticks happen in "us" microseconds */
 static inline unsigned long us_to_tick(unsigned long us)
 {
-	return (us * MX28_INCREMENTER_HZ) / 1000000;
+	return (us * MXS_INCREMENTER_HZ) / 1000000;
 }
 
 int timer_init(void)
@@ -69,7 +73,11 @@
 	mxs_reset_block(&timrot_regs->hw_timrot_rotctrl_reg);
 
 	/* Set fixed_count to 0 */
+#if defined(CONFIG_MX23)
+	writel(0, &timrot_regs->hw_timrot_timcount0);
+#elif defined(CONFIG_MX28)
 	writel(0, &timrot_regs->hw_timrot_fixed_count0);
+#endif
 
 	/* Set UPDATE bit and 1Khz frequency */
 	writel(TIMROT_TIMCTRLn_UPDATE | TIMROT_TIMCTRLn_RELOAD |
@@ -77,7 +85,11 @@
 		&timrot_regs->hw_timrot_timctrl0);
 
 	/* Set fixed_count to maximal value */
+#if defined(CONFIG_MX23)
+	writel(TIMER_LOAD_VAL - 1, &timrot_regs->hw_timrot_timcount0);
+#elif defined(CONFIG_MX28)
 	writel(TIMER_LOAD_VAL, &timrot_regs->hw_timrot_fixed_count0);
+#endif
 
 	return 0;
 }
@@ -86,9 +98,16 @@
 {
 	struct mxs_timrot_regs *timrot_regs =
 		(struct mxs_timrot_regs *)MXS_TIMROT_BASE;
+	uint32_t now;
 
 	/* Current tick value */
-	uint32_t now = readl(&timrot_regs->hw_timrot_running_count0);
+#if defined(CONFIG_MX23)
+	/* Upper bits are the valid ones. */
+	now = readl(&timrot_regs->hw_timrot_timcount0) >>
+		TIMROT_RUNNING_COUNTn_RUNNING_COUNT_OFFSET;
+#elif defined(CONFIG_MX28)
+	now = readl(&timrot_regs->hw_timrot_running_count0);
+#endif
 
 	if (lastdec >= now) {
 		/*
@@ -117,17 +136,17 @@
 }
 
 /* We use the HW_DIGCTL_MICROSECONDS register for sub-millisecond timer. */
-#define	MX28_HW_DIGCTL_MICROSECONDS	0x8001c0c0
+#define	MXS_HW_DIGCTL_MICROSECONDS	0x8001c0c0
 
 void __udelay(unsigned long usec)
 {
 	uint32_t old, new, incr;
 	uint32_t counter = 0;
 
-	old = readl(MX28_HW_DIGCTL_MICROSECONDS);
+	old = readl(MXS_HW_DIGCTL_MICROSECONDS);
 
 	while (counter < usec) {
-		new = readl(MX28_HW_DIGCTL_MICROSECONDS);
+		new = readl(MXS_HW_DIGCTL_MICROSECONDS);
 
 		/* Check if the timer wrapped. */
 		if (new < old) {
@@ -152,5 +171,5 @@
 
 ulong get_tbclk(void)
 {
-	return MX28_INCREMENTER_HZ;
+	return MXS_INCREMENTER_HZ;
 }
diff --git a/arch/arm/cpu/arm926ejs/mxs/u-boot-spl.lds b/arch/arm/cpu/arm926ejs/mxs/u-boot-spl.lds
index fc0418a..67b204e 100644
--- a/arch/arm/cpu/arm926ejs/mxs/u-boot-spl.lds
+++ b/arch/arm/cpu/arm926ejs/mxs/u-boot-spl.lds
@@ -51,12 +51,6 @@
 
 	. = ALIGN(4);
 
-	.u_boot_list : {
-		#include <u-boot.lst>
-	}
-
-	. = ALIGN(4);
-
 	.rel.dyn : {
 		__rel_dyn_start = .;
 		*(.rel*)
diff --git a/arch/arm/cpu/arm926ejs/spear/u-boot-spl.lds b/arch/arm/cpu/arm926ejs/spear/u-boot-spl.lds
index cff660a..7405917 100644
--- a/arch/arm/cpu/arm926ejs/spear/u-boot-spl.lds
+++ b/arch/arm/cpu/arm926ejs/spear/u-boot-spl.lds
@@ -51,12 +51,6 @@
 
 	. = ALIGN(4);
 
-	.u_boot_list : {
-		#include <u-boot.lst>
-	}
-
-	. = ALIGN(4);
-
 	.rel.dyn : {
 		__rel_dyn_start = .;
 		*(.rel*)
diff --git a/arch/arm/cpu/armv7/Makefile b/arch/arm/cpu/armv7/Makefile
index ee8c2b3..4668b3c 100644
--- a/arch/arm/cpu/armv7/Makefile
+++ b/arch/arm/cpu/armv7/Makefile
@@ -32,7 +32,7 @@
 COBJS	+= cpu.o
 COBJS	+= syslib.o
 
-ifneq ($(CONFIG_AM33XX)$(CONFIG_OMAP44XX)$(CONFIG_OMAP54XX)$(CONFIG_TEGRA),)
+ifneq ($(CONFIG_AM33XX)$(CONFIG_OMAP44XX)$(CONFIG_OMAP54XX)$(CONFIG_TEGRA)$(CONFIG_MX6),)
 SOBJS	+= lowlevel_init.o
 endif
 
diff --git a/arch/arm/cpu/armv7/am33xx/board.c b/arch/arm/cpu/armv7/am33xx/board.c
index ab31326..e35a3e3 100644
--- a/arch/arm/cpu/armv7/am33xx/board.c
+++ b/arch/arm/cpu/armv7/am33xx/board.c
@@ -56,11 +56,11 @@
 {
 	int ret;
 
-	ret = omap_mmc_init(0, 0, 0);
+	ret = omap_mmc_init(0, 0, 0, -1, -1);
 	if (ret)
 		return ret;
 
-	return omap_mmc_init(1, 0, 0);
+	return omap_mmc_init(1, 0, 0, -1, -1);
 }
 #endif
 
diff --git a/arch/arm/cpu/armv7/am33xx/ddr.c b/arch/arm/cpu/armv7/am33xx/ddr.c
index fd9fc4a..448cc40 100644
--- a/arch/arm/cpu/armv7/am33xx/ddr.c
+++ b/arch/arm/cpu/armv7/am33xx/ddr.c
@@ -45,13 +45,19 @@
  */
 void config_sdram(const struct emif_regs *regs)
 {
-	writel(regs->ref_ctrl, &emif_reg->emif_sdram_ref_ctrl);
-	writel(regs->ref_ctrl, &emif_reg->emif_sdram_ref_ctrl_shdw);
-	if (regs->zq_config){
+	if (regs->zq_config) {
+		/*
+		 * A value of 0x2800 for the REF CTRL will give us
+		 * about 570us for a delay, which will be long enough
+		 * to configure things.
+		 */
+		writel(0x2800, &emif_reg->emif_sdram_ref_ctrl);
 		writel(regs->zq_config, &emif_reg->emif_zq_config);
 		writel(regs->sdram_config, &cstat->secure_emif_sdram_config);
 	}
 	writel(regs->sdram_config, &emif_reg->emif_sdram_config);
+	writel(regs->ref_ctrl, &emif_reg->emif_sdram_ref_ctrl);
+	writel(regs->ref_ctrl, &emif_reg->emif_sdram_ref_ctrl_shdw);
 }
 
 /**
diff --git a/arch/arm/cpu/armv7/am33xx/u-boot-spl.lds b/arch/arm/cpu/armv7/am33xx/u-boot-spl.lds
new file mode 100644
index 0000000..b6a929f
--- /dev/null
+++ b/arch/arm/cpu/armv7/am33xx/u-boot-spl.lds
@@ -0,0 +1,67 @@
+/*
+ * (C) Copyright 2002
+ * Gary Jennejohn, DENX Software Engineering, <garyj@denx.de>
+ *
+ * (C) Copyright 2010
+ * Texas Instruments, <www.ti.com>
+ *	Aneesh V <aneesh@ti.com>
+ *
+ * See file CREDITS for list of people who contributed to this
+ * project.
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of
+ * the License, or (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
+ * MA 02111-1307 USA
+ */
+
+MEMORY { .sram : ORIGIN = CONFIG_SPL_TEXT_BASE,\
+		LENGTH = CONFIG_SPL_MAX_SIZE }
+MEMORY { .sdram : ORIGIN = CONFIG_SPL_BSS_START_ADDR, \
+		LENGTH = CONFIG_SPL_BSS_MAX_SIZE }
+
+OUTPUT_FORMAT("elf32-littlearm", "elf32-littlearm", "elf32-littlearm")
+OUTPUT_ARCH(arm)
+ENTRY(_start)
+SECTIONS
+{
+	.text      :
+	{
+		__start = .;
+		arch/arm/cpu/armv7/start.o	(.text)
+		*(.text*)
+	} >.sram
+
+	. = ALIGN(4);
+	.rodata : { *(SORT_BY_ALIGNMENT(.rodata*)) } >.sram
+
+	. = ALIGN(4);
+	.data : { *(SORT_BY_ALIGNMENT(.data*)) } >.sram
+
+	.u_boot_list : {
+		KEEP(*(SORT(.u_boot_list*)));
+	} >.sram
+
+	. = ALIGN(4);
+	__image_copy_end = .;
+	_end = .;
+
+	.bss :
+	{
+		. = ALIGN(4);
+		__bss_start = .;
+		*(.bss*)
+		. = ALIGN(4);
+		__bss_end = .;
+	} >.sdram
+}
diff --git a/arch/arm/cpu/armv7/config.mk b/arch/arm/cpu/armv7/config.mk
index 350e946..9c3e2f3 100644
--- a/arch/arm/cpu/armv7/config.mk
+++ b/arch/arm/cpu/armv7/config.mk
@@ -40,5 +40,5 @@
 PLATFORM_NO_UNALIGNED := $(PF_NO_UNALIGNED)
 
 ifneq ($(CONFIG_IMX_CONFIG),)
-ALL-y	+= $(OBJTREE)/u-boot.imx
+ALL-y	+= $(obj)u-boot.imx
 endif
diff --git a/arch/arm/cpu/armv7/mx6/Makefile b/arch/arm/cpu/armv7/mx6/Makefile
index cbce411..4f9ca68 100644
--- a/arch/arm/cpu/armv7/mx6/Makefile
+++ b/arch/arm/cpu/armv7/mx6/Makefile
@@ -28,7 +28,6 @@
 LIB	= $(obj)lib$(SOC).o
 
 COBJS	= soc.o clock.o
-SOBJS   = lowlevel_init.o
 
 SRCS	:= $(SOBJS:.o=.S) $(COBJS:.o=.c)
 OBJS	:= $(addprefix $(obj),$(SOBJS) $(COBJS))
diff --git a/arch/arm/cpu/armv7/mx6/lowlevel_init.S b/arch/arm/cpu/armv7/mx6/lowlevel_init.S
deleted file mode 100644
index 7b60ca7..0000000
--- a/arch/arm/cpu/armv7/mx6/lowlevel_init.S
+++ /dev/null
@@ -1,35 +0,0 @@
-/*
- * Copyright (C) 2010-2011 Freescale Semiconductor, Inc.
- *
- * This program is free software; you can redistribute it and/or
- * modify it under the terms of the GNU General Public License as
- * published by the Free Software Foundation; either version 2 of
- * the License, or (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
- * MA 02111-1307 USA
- */
-.section ".text.init", "x"
-
-#include <linux/linkage.h>
-
-.macro init_arm_errata
-	/* ARM erratum ID #743622 */
-	mrc	p15, 0, r10, c15, c0, 1		/* read diagnostic register */
-	orr	r10, r10, #1 << 6		/* set bit #6 */
-	/* ARM erratum ID #751472 */
-	orr	r10, r10, #1 << 11		/* set bit #11 */
-	mcr	p15, 0, r10, c15, c0, 1		/* write diagnostic register */
-.endm
-
-ENTRY(lowlevel_init)
-	init_arm_errata
-	mov pc, lr
-ENDPROC(lowlevel_init)
diff --git a/arch/arm/cpu/armv7/mx6/soc.c b/arch/arm/cpu/armv7/mx6/soc.c
index a8aad5d..193ba12 100644
--- a/arch/arm/cpu/armv7/mx6/soc.c
+++ b/arch/arm/cpu/armv7/mx6/soc.c
@@ -30,6 +30,7 @@
 #include <asm/arch/clock.h>
 #include <asm/arch/sys_proto.h>
 #include <asm/imx-common/boot_mode.h>
+#include <stdbool.h>
 
 struct scu_regs {
 	u32	ctrl;
@@ -121,12 +122,23 @@
 	writel(reg, &anatop->reg_core);
 }
 
+static void imx_set_wdog_powerdown(bool enable)
+{
+	struct wdog_regs *wdog1 = (struct wdog_regs *)WDOG1_BASE_ADDR;
+	struct wdog_regs *wdog2 = (struct wdog_regs *)WDOG2_BASE_ADDR;
+
+	/* Write to the PDE (Power Down Enable) bit */
+	writew(enable, &wdog1->wmcr);
+	writew(enable, &wdog2->wmcr);
+}
+
 int arch_cpu_init(void)
 {
 	init_aips();
 
 	set_vddsoc(1200);	/* Set VDDSOC to 1.2V */
 
+	imx_set_wdog_powerdown(false); /* Disable PDE bit of WMCR register */
 	return 0;
 }
 
@@ -193,3 +205,7 @@
 	{"esdhc4",	MAKE_CFGVAL(0x40, 0x38, 0x00, 0x00)},
 	{NULL,		0},
 };
+
+void s_init(void)
+{
+}
diff --git a/arch/arm/cpu/armv7/omap-common/boot-common.c b/arch/arm/cpu/armv7/omap-common/boot-common.c
index 2b584e0..24cbe2d 100644
--- a/arch/arm/cpu/armv7/omap-common/boot-common.c
+++ b/arch/arm/cpu/armv7/omap-common/boot-common.c
@@ -55,17 +55,20 @@
 #ifdef CONFIG_SPL_NAND_SUPPORT
 	gpmc_init();
 #endif
+#if defined(CONFIG_AM33XX) && defined(CONFIG_SPL_MUSB_NEW_SUPPORT)
+	arch_misc_init();
+#endif
 }
 
 int board_mmc_init(bd_t *bis)
 {
 	switch (spl_boot_device()) {
 	case BOOT_DEVICE_MMC1:
-		omap_mmc_init(0, 0, 0);
+		omap_mmc_init(0, 0, 0, -1, -1);
 		break;
 	case BOOT_DEVICE_MMC2:
 	case BOOT_DEVICE_MMC2_2:
-		omap_mmc_init(1, 0, 0);
+		omap_mmc_init(1, 0, 0, -1, -1);
 		break;
 	}
 	return 0;
diff --git a/arch/arm/cpu/armv7/omap-common/clocks-common.c b/arch/arm/cpu/armv7/omap-common/clocks-common.c
index b1fd277..9ed1899 100644
--- a/arch/arm/cpu/armv7/omap-common/clocks-common.c
+++ b/arch/arm/cpu/armv7/omap-common/clocks-common.c
@@ -36,6 +36,7 @@
 #include <asm/arch/sys_proto.h>
 #include <asm/utils.h>
 #include <asm/omap_gpio.h>
+#include <asm/emif.h>
 
 #ifndef CONFIG_SPL_BUILD
 /*
@@ -46,9 +47,20 @@
 #define puts(s)
 #endif
 
+const u32 sys_clk_array[8] = {
+	12000000,	       /* 12 MHz */
+	13000000,	       /* 13 MHz */
+	16800000,	       /* 16.8 MHz */
+	19200000,	       /* 19.2 MHz */
+	26000000,	       /* 26 MHz */
+	27000000,	       /* 27 MHz */
+	38400000,	       /* 38.4 MHz */
+	20000000,		/* 20 MHz */
+};
+
 static inline u32 __get_sys_clk_index(void)
 {
-	u32 ind;
+	s8 ind;
 	/*
 	 * For ES1 the ROM code calibration of sys clock is not reliable
 	 * due to hw issue. So, use hard-coded value. If this value is not
@@ -60,8 +72,15 @@
 		ind = OMAP_SYS_CLK_IND_38_4_MHZ;
 	else {
 		/* SYS_CLKSEL - 1 to match the dpll param array indices */
-		ind = (readl(&prcm->cm_sys_clksel) &
+		ind = (readl((*prcm)->cm_sys_clksel) &
 			CM_SYS_CLKSEL_SYS_CLKSEL_MASK) - 1;
+		/*
+		 * SYS_CLKSEL value for 20MHz is 0. This is introduced newly
+		 * in DRA7XX socs. SYS_CLKSEL -1 will be greater than
+		 * NUM_SYS_CLK. So considering the last 3 bits as the index
+		 * for the dpll param array.
+		 */
+		ind &= CM_SYS_CLKSEL_SYS_CLKSEL_MASK;
 	}
 	return ind;
 }
@@ -75,7 +94,34 @@
 	return sys_clk_array[index];
 }
 
+void setup_post_dividers(u32 const base, const struct dpll_params *params)
+{
+	struct dpll_regs *const dpll_regs = (struct dpll_regs *)base;
+
+	/* Setup post-dividers */
+	if (params->m2 >= 0)
+		writel(params->m2, &dpll_regs->cm_div_m2_dpll);
+	if (params->m3 >= 0)
+		writel(params->m3, &dpll_regs->cm_div_m3_dpll);
+	if (params->m4_h11 >= 0)
+		writel(params->m4_h11, &dpll_regs->cm_div_m4_h11_dpll);
+	if (params->m5_h12 >= 0)
+		writel(params->m5_h12, &dpll_regs->cm_div_m5_h12_dpll);
+	if (params->m6_h13 >= 0)
+		writel(params->m6_h13, &dpll_regs->cm_div_m6_h13_dpll);
+	if (params->m7_h14 >= 0)
+		writel(params->m7_h14, &dpll_regs->cm_div_m7_h14_dpll);
+	if (params->h21 >= 0)
+		writel(params->h21, &dpll_regs->cm_div_h21_dpll);
+	if (params->h22 >= 0)
+		writel(params->h22, &dpll_regs->cm_div_h22_dpll);
+	if (params->h23 >= 0)
+		writel(params->h23, &dpll_regs->cm_div_h23_dpll);
+	if (params->h24 >= 0)
+		writel(params->h24, &dpll_regs->cm_div_h24_dpll);
+}
+
-static inline void do_bypass_dpll(u32 *const base)
+static inline void do_bypass_dpll(u32 const base)
 {
 	struct dpll_regs *dpll_regs = (struct dpll_regs *)base;
 
@@ -85,17 +131,17 @@
 			CM_CLKMODE_DPLL_EN_SHIFT);
 }
 
-static inline void wait_for_bypass(u32 *const base)
+static inline void wait_for_bypass(u32 const base)
 {
 	struct dpll_regs *const dpll_regs = (struct dpll_regs *)base;
 
 	if (!wait_on_value(ST_DPLL_CLK_MASK, 0, &dpll_regs->cm_idlest_dpll,
 				LDELAY)) {
-		printf("Bypassing DPLL failed %p\n", base);
+		printf("Bypassing DPLL failed %x\n", base);
 	}
 }
 
-static inline void do_lock_dpll(u32 *const base)
+static inline void do_lock_dpll(u32 const base)
 {
 	struct dpll_regs *const dpll_regs = (struct dpll_regs *)base;
 
@@ -104,18 +150,18 @@
 		      DPLL_EN_LOCK << CM_CLKMODE_DPLL_EN_SHIFT);
 }
 
-static inline void wait_for_lock(u32 *const base)
+static inline void wait_for_lock(u32 const base)
 {
 	struct dpll_regs *const dpll_regs = (struct dpll_regs *)base;
 
 	if (!wait_on_value(ST_DPLL_CLK_MASK, ST_DPLL_CLK_MASK,
 		&dpll_regs->cm_idlest_dpll, LDELAY)) {
-		printf("DPLL locking failed for %p\n", base);
+		printf("DPLL locking failed for %x\n", base);
 		hang();
 	}
 }
 
-inline u32 check_for_lock(u32 *const base)
+inline u32 check_for_lock(u32 const base)
 {
 	struct dpll_regs *const dpll_regs = (struct dpll_regs *)base;
 	u32 lock = readl(&dpll_regs->cm_idlest_dpll) & ST_DPLL_CLK_MASK;
@@ -123,12 +169,65 @@
 	return lock;
 }
 
+const struct dpll_params *get_mpu_dpll_params(struct dplls const *dpll_data)
+{
+	u32 sysclk_ind = get_sys_clk_index();
+	return &dpll_data->mpu[sysclk_ind];
+}
+
+const struct dpll_params *get_core_dpll_params(struct dplls const *dpll_data)
+{
+	u32 sysclk_ind = get_sys_clk_index();
+	return &dpll_data->core[sysclk_ind];
+}
+
+const struct dpll_params *get_per_dpll_params(struct dplls const *dpll_data)
+{
+	u32 sysclk_ind = get_sys_clk_index();
+	return &dpll_data->per[sysclk_ind];
+}
+
+const struct dpll_params *get_iva_dpll_params(struct dplls const *dpll_data)
+{
+	u32 sysclk_ind = get_sys_clk_index();
+	return &dpll_data->iva[sysclk_ind];
+}
+
+const struct dpll_params *get_usb_dpll_params(struct dplls const *dpll_data)
+{
+	u32 sysclk_ind = get_sys_clk_index();
+	return &dpll_data->usb[sysclk_ind];
+}
+
+const struct dpll_params *get_abe_dpll_params(struct dplls const *dpll_data)
+{
+#ifdef CONFIG_SYS_OMAP_ABE_SYSCK
+	u32 sysclk_ind = get_sys_clk_index();
+	return &dpll_data->abe[sysclk_ind];
+#else
+	return dpll_data->abe;
+#endif
+}
+
+static const struct dpll_params *get_ddr_dpll_params
+			(struct dplls const *dpll_data)
+{
+	u32 sysclk_ind = get_sys_clk_index();
+
+	if (!dpll_data->ddr)
+		return NULL;
+	return &dpll_data->ddr[sysclk_ind];
+}
+
-static void do_setup_dpll(u32 *const base, const struct dpll_params *params,
+static void do_setup_dpll(u32 const base, const struct dpll_params *params,
 				u8 lock, char *dpll)
 {
 	u32 temp, M, N;
 	struct dpll_regs *const dpll_regs = (struct dpll_regs *)base;
 
+	if (!params)
+		return;
+
 	temp = readl(&dpll_regs->cm_clksel_dpll);
 
 	if (check_for_lock(base)) {
@@ -183,7 +282,7 @@
 	omap_rev = omap_revision();
 	sys_clk_khz = get_sys_clk_freq() / 1000;
 
-	core_dpll_params = get_core_dpll_params();
+	core_dpll_params = get_core_dpll_params(*dplls_data);
 
 	debug("sys_clk %d\n ", sys_clk_khz * 1000);
 
@@ -235,24 +334,19 @@
 	 */
 	if ((omap_rev >= OMAP4460_ES1_0) && (omap_rev < OMAP5430_ES1_0)) {
 		mpu_dpll_regs =
-			(struct dpll_regs *)&prcm->cm_clkmode_dpll_mpu;
-		bypass_dpll(&prcm->cm_clkmode_dpll_mpu);
-		clrbits_le32(&prcm->cm_mpu_mpu_clkctrl,
+			(struct dpll_regs *)((*prcm)->cm_clkmode_dpll_mpu);
+		bypass_dpll((*prcm)->cm_clkmode_dpll_mpu);
+		clrbits_le32((*prcm)->cm_mpu_mpu_clkctrl,
 			MPU_CLKCTRL_CLKSEL_EMIF_DIV_MODE_MASK);
-		setbits_le32(&prcm->cm_mpu_mpu_clkctrl,
+		setbits_le32((*prcm)->cm_mpu_mpu_clkctrl,
 			MPU_CLKCTRL_CLKSEL_ABE_DIV_MODE_MASK);
 		clrbits_le32(&mpu_dpll_regs->cm_clksel_dpll,
 			CM_CLKSEL_DCC_EN_MASK);
 	}
 
-	setbits_le32(&prcm->cm_mpu_mpu_clkctrl,
-		MPU_CLKCTRL_CLKSEL_EMIF_DIV_MODE_MASK);
-	setbits_le32(&prcm->cm_mpu_mpu_clkctrl,
-		MPU_CLKCTRL_CLKSEL_ABE_DIV_MODE_MASK);
+	params = get_mpu_dpll_params(*dplls_data);
 
-	params = get_mpu_dpll_params();
-
-	do_setup_dpll(&prcm->cm_clkmode_dpll_mpu, params, DPLL_LOCK, "mpu");
+	do_setup_dpll((*prcm)->cm_clkmode_dpll_mpu, params, DPLL_LOCK, "mpu");
 	debug("MPU DPLL locked\n");
 }
 
@@ -271,17 +365,17 @@
 	 * Use CLKINP in KHz and adjust the denominator accordingly so
 	 * that we have enough accuracy and at the same time no overflow
 	 */
-	params = get_usb_dpll_params();
+	params = get_usb_dpll_params(*dplls_data);
 	num = params->m * sys_clk_khz;
 	den = (params->n + 1) * 250 * 1000;
 	num += den - 1;
 	sd_div = num / den;
-	clrsetbits_le32(&prcm->cm_clksel_dpll_usb,
+	clrsetbits_le32((*prcm)->cm_clksel_dpll_usb,
 			CM_CLKSEL_DPLL_DPLL_SD_DIV_MASK,
 			sd_div << CM_CLKSEL_DPLL_DPLL_SD_DIV_SHIFT);
 
 	/* Now setup the dpll with the regular function */
-	do_setup_dpll(&prcm->cm_clkmode_dpll_usb, params, DPLL_LOCK, "usb");
+	do_setup_dpll((*prcm)->cm_clkmode_dpll_usb, params, DPLL_LOCK, "usb");
 }
 #endif
 
@@ -293,28 +387,28 @@
 	debug("setup_dplls\n");
 
 	/* CORE dpll */
-	params = get_core_dpll_params();	/* default - safest */
+	params = get_core_dpll_params(*dplls_data);	/* default - safest */
 	/*
 	 * Do not lock the core DPLL now. Just set it up.
 	 * Core DPLL will be locked after setting up EMIF
 	 * using the FREQ_UPDATE method(freq_update_core())
 	 */
-	if (omap_revision() != OMAP5432_ES1_0)
-		do_setup_dpll(&prcm->cm_clkmode_dpll_core, params,
+	if (emif_sdram_type() == EMIF_SDRAM_TYPE_LPDDR2)
+		do_setup_dpll((*prcm)->cm_clkmode_dpll_core, params,
 							DPLL_NO_LOCK, "core");
 	else
-		do_setup_dpll(&prcm->cm_clkmode_dpll_core, params,
+		do_setup_dpll((*prcm)->cm_clkmode_dpll_core, params,
 							DPLL_LOCK, "core");
 	/* Set the ratios for CORE_CLK, L3_CLK, L4_CLK */
 	temp = (CLKSEL_CORE_X2_DIV_1 << CLKSEL_CORE_SHIFT) |
 	    (CLKSEL_L3_CORE_DIV_2 << CLKSEL_L3_SHIFT) |
 	    (CLKSEL_L4_L3_DIV_2 << CLKSEL_L4_SHIFT);
-	writel(temp, &prcm->cm_clksel_core);
+	writel(temp, (*prcm)->cm_clksel_core);
 	debug("Core DPLL configured\n");
 
 	/* lock PER dpll */
-	params = get_per_dpll_params();
-	do_setup_dpll(&prcm->cm_clkmode_dpll_per,
+	params = get_per_dpll_params(*dplls_data);
+	do_setup_dpll((*prcm)->cm_clkmode_dpll_per,
 			params, DPLL_LOCK, "per");
 	debug("PER DPLL locked\n");
 
@@ -324,6 +418,9 @@
 #ifdef CONFIG_USB_EHCI_OMAP
 	setup_usb_dpll();
 #endif
+	params = get_ddr_dpll_params(*dplls_data);
+	do_setup_dpll((*prcm)->cm_clkmode_dpll_ddrphy,
+		      params, DPLL_LOCK, "ddr");
 }
 
 #ifdef CONFIG_SYS_CLOCKS_ENABLE_ALL
@@ -333,14 +430,14 @@
 	const struct dpll_params *params;
 
 	/* IVA */
-	clrsetbits_le32(&prcm->cm_bypclk_dpll_iva,
+	clrsetbits_le32((*prcm)->cm_bypclk_dpll_iva,
 		CM_BYPCLK_DPLL_IVA_CLKSEL_MASK, DPLL_IVA_CLKSEL_CORE_X2_DIV_2);
 
-	params = get_iva_dpll_params();
-	do_setup_dpll(&prcm->cm_clkmode_dpll_iva, params, DPLL_LOCK, "iva");
+	params = get_iva_dpll_params(*dplls_data);
+	do_setup_dpll((*prcm)->cm_clkmode_dpll_iva, params, DPLL_LOCK, "iva");
 
 	/* Configure ABE dpll */
-	params = get_abe_dpll_params();
+	params = get_abe_dpll_params(*dplls_data);
 #ifdef CONFIG_SYS_OMAP_ABE_SYSCK
 	abe_ref_clk = CM_ABE_PLL_REF_CLKSEL_CLKSEL_SYSCLK;
 #else
@@ -349,64 +446,65 @@
 	 * We need to enable some additional options to achieve
 	 * 196.608MHz from 32768 Hz
 	 */
-	setbits_le32(&prcm->cm_clkmode_dpll_abe,
+	setbits_le32((*prcm)->cm_clkmode_dpll_abe,
 			CM_CLKMODE_DPLL_DRIFTGUARD_EN_MASK|
 			CM_CLKMODE_DPLL_RELOCK_RAMP_EN_MASK|
 			CM_CLKMODE_DPLL_LPMODE_EN_MASK|
 			CM_CLKMODE_DPLL_REGM4XEN_MASK);
 	/* Spend 4 REFCLK cycles at each stage */
-	clrsetbits_le32(&prcm->cm_clkmode_dpll_abe,
+	clrsetbits_le32((*prcm)->cm_clkmode_dpll_abe,
 			CM_CLKMODE_DPLL_RAMP_RATE_MASK,
 			1 << CM_CLKMODE_DPLL_RAMP_RATE_SHIFT);
 #endif
 
 	/* Select the right reference clk */
-	clrsetbits_le32(&prcm->cm_abe_pll_ref_clksel,
+	clrsetbits_le32((*prcm)->cm_abe_pll_ref_clksel,
 			CM_ABE_PLL_REF_CLKSEL_CLKSEL_MASK,
 			abe_ref_clk << CM_ABE_PLL_REF_CLKSEL_CLKSEL_SHIFT);
 	/* Lock the dpll */
-	do_setup_dpll(&prcm->cm_clkmode_dpll_abe, params, DPLL_LOCK, "abe");
+	do_setup_dpll((*prcm)->cm_clkmode_dpll_abe, params, DPLL_LOCK, "abe");
 }
 #endif
 
-void do_scale_tps62361(int gpio, u32 reg, u32 volt_mv)
+u32 get_offset_code(u32 volt_offset, struct pmic_data *pmic)
 {
-	u32 step;
-	int ret = 0;
-
-	/* See if we can first get the GPIO if needed */
-	if (gpio >= 0)
-		ret = gpio_request(gpio, "TPS62361_VSEL0_GPIO");
-	if (ret < 0) {
-		printf("%s: gpio %d request failed %d\n", __func__, gpio, ret);
-		gpio = -1;
-	}
-
-	/* Pull the GPIO low to select SET0 register, while we program SET1 */
-	if (gpio >= 0)
-		gpio_direction_output(gpio, 0);
+	u32 offset_code;
 
-	step = volt_mv - TPS62361_BASE_VOLT_MV;
-	step /= 10;
+	volt_offset -= pmic->base_offset;
 
-	debug("do_scale_tps62361: volt - %d step - 0x%x\n", volt_mv, step);
-	if (omap_vc_bypass_send_value(TPS62361_I2C_SLAVE_ADDR, reg, step))
-		puts("Scaling voltage failed for vdd_mpu from TPS\n");
+	offset_code = (volt_offset + pmic->step - 1) / pmic->step;
 
-	/* Pull the GPIO high to select SET1 register */
-	if (gpio >= 0)
-		gpio_direction_output(gpio, 1);
+	/*
+	 * Offset codes 1-6 all give the base voltage in Palmas
+	 * Offset code 0 switches OFF the SMPS
+	 */
+	return offset_code + pmic->start_code;
 }
 
-void do_scale_vcore(u32 vcore_reg, u32 volt_mv)
+void do_scale_vcore(u32 vcore_reg, u32 volt_mv, struct pmic_data *pmic)
 {
 	u32 offset_code;
 	u32 offset = volt_mv;
+	int ret = 0;
+
+	/* See if we can first get the GPIO if needed */
+	if (pmic->gpio_en)
+		ret = gpio_request(pmic->gpio, "PMIC_GPIO");
+
+	if (ret < 0) {
+		printf("%s: gpio %d request failed %d\n", __func__,
+							pmic->gpio, ret);
+		return;
+	}
+
+	/* Pull the GPIO low to select SET0 register, while we program SET1 */
+	if (pmic->gpio_en)
+		gpio_direction_output(pmic->gpio, 0);
 
 	/* convert to uV for better accuracy in the calculations */
 	offset *= 1000;
 
-	offset_code = get_offset_code(offset);
+	offset_code = get_offset_code(offset, pmic);
 
 	debug("do_scale_vcore: volt - %d offset_code - 0x%x\n", volt_mv,
 		offset_code);
@@ -414,16 +512,46 @@
 	if (omap_vc_bypass_send_value(SMPS_I2C_SLAVE_ADDR,
 				vcore_reg, offset_code))
 		printf("Scaling voltage failed for 0x%x\n", vcore_reg);
+
+	if (pmic->gpio_en)
+		gpio_direction_output(pmic->gpio, 1);
+}
+
+/*
+ * Setup the voltages for vdd_mpu, vdd_core, and vdd_iva
+ * We set the maximum voltages allowed here because Smart-Reflex is not
+ * enabled in bootloader. Voltage initialization in the kernel will set
+ * these to the nominal values after enabling Smart-Reflex
+ */
+void scale_vcores(struct vcores_data const *vcores)
+{
+	omap_vc_init(PRM_VC_I2C_CHANNEL_FREQ_KHZ);
+
+	do_scale_vcore(vcores->core.addr, vcores->core.value,
+					  vcores->core.pmic);
+
+	do_scale_vcore(vcores->mpu.addr, vcores->mpu.value,
+					  vcores->mpu.pmic);
+
+	do_scale_vcore(vcores->mm.addr, vcores->mm.value,
+					  vcores->mm.pmic);
+
+	 if (emif_sdram_type() == EMIF_SDRAM_TYPE_DDR3) {
+		/* Configure LDO SRAM "magic" bits */
+		writel(2, (*prcm)->prm_sldo_core_setup);
+		writel(2, (*prcm)->prm_sldo_mpu_setup);
+		writel(2, (*prcm)->prm_sldo_mm_setup);
+	}
 }
 
-static inline void enable_clock_domain(u32 *const clkctrl_reg, u32 enable_mode)
+static inline void enable_clock_domain(u32 const clkctrl_reg, u32 enable_mode)
 {
 	clrsetbits_le32(clkctrl_reg, CD_CLKCTRL_CLKTRCTRL_MASK,
 			enable_mode << CD_CLKCTRL_CLKTRCTRL_SHIFT);
-	debug("Enable clock domain - %p\n", clkctrl_reg);
+	debug("Enable clock domain - %x\n", clkctrl_reg);
 }
 
-static inline void wait_for_clk_enable(u32 *clkctrl_addr)
+static inline void wait_for_clk_enable(u32 clkctrl_addr)
 {
 	u32 clkctrl, idlest = MODULE_CLKCTRL_IDLEST_DISABLED;
 	u32 bound = LDELAY;
@@ -435,19 +563,19 @@
 		idlest = (clkctrl & MODULE_CLKCTRL_IDLEST_MASK) >>
 			 MODULE_CLKCTRL_IDLEST_SHIFT;
 		if (--bound == 0) {
-			printf("Clock enable failed for 0x%p idlest 0x%x\n",
+			printf("Clock enable failed for 0x%x idlest 0x%x\n",
 				clkctrl_addr, clkctrl);
 			return;
 		}
 	}
 }
 
-static inline void enable_clock_module(u32 *const clkctrl_addr, u32 enable_mode,
+static inline void enable_clock_module(u32 const clkctrl_addr, u32 enable_mode,
 				u32 wait_for_enable)
 {
 	clrsetbits_le32(clkctrl_addr, MODULE_CLKCTRL_MODULEMODE_MASK,
 			enable_mode << MODULE_CLKCTRL_MODULEMODE_SHIFT);
-	debug("Enable clock module - %p\n", clkctrl_addr);
+	debug("Enable clock module - %x\n", clkctrl_addr);
 	if (wait_for_enable)
 		wait_for_clk_enable(clkctrl_addr);
 }
@@ -458,12 +586,12 @@
 	const struct dpll_params *core_dpll_params;
 	u32 omap_rev = omap_revision();
 
-	core_dpll_params = get_core_dpll_params();
+	core_dpll_params = get_core_dpll_params(*dplls_data);
 	/* Put EMIF clock domain in sw wakeup mode */
-	enable_clock_domain(&prcm->cm_memif_clkstctrl,
+	enable_clock_domain((*prcm)->cm_memif_clkstctrl,
 				CD_CLKCTRL_CLKTRCTRL_SW_WKUP);
-	wait_for_clk_enable(&prcm->cm_memif_emif_1_clkctrl);
-	wait_for_clk_enable(&prcm->cm_memif_emif_2_clkctrl);
+	wait_for_clk_enable((*prcm)->cm_memif_emif_1_clkctrl);
+	wait_for_clk_enable((*prcm)->cm_memif_emif_2_clkctrl);
 
 	freq_config1 = SHADOW_FREQ_CONFIG1_FREQ_UPDATE_MASK |
 	    SHADOW_FREQ_CONFIG1_DLL_RESET_MASK;
@@ -475,9 +603,9 @@
 			SHADOW_FREQ_CONFIG1_M2_DIV_SHIFT) &
 			SHADOW_FREQ_CONFIG1_M2_DIV_MASK;
 
-	writel(freq_config1, &prcm->cm_shadow_freq_config1);
+	writel(freq_config1, (*prcm)->cm_shadow_freq_config1);
 	if (!wait_on_value(SHADOW_FREQ_CONFIG1_FREQ_UPDATE_MASK, 0,
-				&prcm->cm_shadow_freq_config1, LDELAY)) {
+			(u32 *) (*prcm)->cm_shadow_freq_config1, LDELAY)) {
 		puts("FREQ UPDATE procedure failed!!");
 		hang();
 	}
@@ -489,20 +617,20 @@
 	 */
 	if (omap_rev != OMAP5430_ES1_0) {
 		/* Put EMIF clock domain back in hw auto mode */
-		enable_clock_domain(&prcm->cm_memif_clkstctrl,
+		enable_clock_domain((*prcm)->cm_memif_clkstctrl,
 					CD_CLKCTRL_CLKTRCTRL_HW_AUTO);
-		wait_for_clk_enable(&prcm->cm_memif_emif_1_clkctrl);
-		wait_for_clk_enable(&prcm->cm_memif_emif_2_clkctrl);
+		wait_for_clk_enable((*prcm)->cm_memif_emif_1_clkctrl);
+		wait_for_clk_enable((*prcm)->cm_memif_emif_2_clkctrl);
 	}
 }
 
-void bypass_dpll(u32 *const base)
+void bypass_dpll(u32 const base)
 {
 	do_bypass_dpll(base);
 	wait_for_bypass(base);
 }
 
-void lock_dpll(u32 *const base)
+void lock_dpll(u32 const base)
 {
 	do_lock_dpll(base);
 	wait_for_lock(base);
@@ -511,39 +639,39 @@
 void setup_clocks_for_console(void)
 {
 	/* Do not add any spl_debug prints in this function */
-	clrsetbits_le32(&prcm->cm_l4per_clkstctrl, CD_CLKCTRL_CLKTRCTRL_MASK,
+	clrsetbits_le32((*prcm)->cm_l4per_clkstctrl, CD_CLKCTRL_CLKTRCTRL_MASK,
 			CD_CLKCTRL_CLKTRCTRL_SW_WKUP <<
 			CD_CLKCTRL_CLKTRCTRL_SHIFT);
 
 	/* Enable all UARTs - console will be on one of them */
-	clrsetbits_le32(&prcm->cm_l4per_uart1_clkctrl,
+	clrsetbits_le32((*prcm)->cm_l4per_uart1_clkctrl,
 			MODULE_CLKCTRL_MODULEMODE_MASK,
 			MODULE_CLKCTRL_MODULEMODE_SW_EXPLICIT_EN <<
 			MODULE_CLKCTRL_MODULEMODE_SHIFT);
 
-	clrsetbits_le32(&prcm->cm_l4per_uart2_clkctrl,
+	clrsetbits_le32((*prcm)->cm_l4per_uart2_clkctrl,
 			MODULE_CLKCTRL_MODULEMODE_MASK,
 			MODULE_CLKCTRL_MODULEMODE_SW_EXPLICIT_EN <<
 			MODULE_CLKCTRL_MODULEMODE_SHIFT);
 
-	clrsetbits_le32(&prcm->cm_l4per_uart3_clkctrl,
+	clrsetbits_le32((*prcm)->cm_l4per_uart3_clkctrl,
 			MODULE_CLKCTRL_MODULEMODE_MASK,
 			MODULE_CLKCTRL_MODULEMODE_SW_EXPLICIT_EN <<
 			MODULE_CLKCTRL_MODULEMODE_SHIFT);
 
-	clrsetbits_le32(&prcm->cm_l4per_uart3_clkctrl,
+	clrsetbits_le32((*prcm)->cm_l4per_uart3_clkctrl,
 			MODULE_CLKCTRL_MODULEMODE_MASK,
 			MODULE_CLKCTRL_MODULEMODE_SW_EXPLICIT_EN <<
 			MODULE_CLKCTRL_MODULEMODE_SHIFT);
 
-	clrsetbits_le32(&prcm->cm_l4per_clkstctrl, CD_CLKCTRL_CLKTRCTRL_MASK,
+	clrsetbits_le32((*prcm)->cm_l4per_clkstctrl, CD_CLKCTRL_CLKTRCTRL_MASK,
 			CD_CLKCTRL_CLKTRCTRL_HW_AUTO <<
 			CD_CLKCTRL_CLKTRCTRL_SHIFT);
 }
 
-void do_enable_clocks(u32 *const *clk_domains,
-			    u32 *const *clk_modules_hw_auto,
-			    u32 *const *clk_modules_explicit_en,
+void do_enable_clocks(u32 const *clk_domains,
+			    u32 const *clk_modules_hw_auto,
+			    u32 const *clk_modules_explicit_en,
 			    u8 wait_for_enable)
 {
 	u32 i, max = 100;
@@ -582,7 +710,7 @@
 	case OMAP_INIT_CONTEXT_UBOOT_FROM_NOR:
 	case OMAP_INIT_CONTEXT_UBOOT_AFTER_CH:
 		enable_basic_clocks();
-		scale_vcores();
+		scale_vcores(*omap_vcores);
 		setup_dplls();
 #ifdef CONFIG_SYS_CLOCKS_ENABLE_ALL
 		setup_non_essential_dplls();
diff --git a/arch/arm/cpu/armv7/omap-common/emif-common.c b/arch/arm/cpu/armv7/omap-common/emif-common.c
index 88253cf..9eb1279 100644
--- a/arch/arm/cpu/armv7/omap-common/emif-common.c
+++ b/arch/arm/cpu/armv7/omap-common/emif-common.c
@@ -66,6 +66,19 @@
 		return 0;
 }
 
+/*
+ * Get SDRAM type connected to EMIF.
+ * Assuming similar SDRAM parts are connected to both EMIF's
+ * which is typically the case. So it is sufficient to get
+ * SDRAM type from EMIF1.
+ */
+u32 emif_sdram_type()
+{
+	struct emif_reg_struct *emif = (struct emif_reg_struct *)EMIF1_BASE;
+
+	return (readl(&emif->emif_sdram_config) &
+		EMIF_REG_SDRAM_TYPE_MASK) >> EMIF_REG_SDRAM_TYPE_SHIFT;
+}
 
 static inline u32 get_mr(u32 base, u32 cs, u32 mr_addr)
 {
@@ -110,11 +123,13 @@
 static void do_lpddr2_init(u32 base, u32 cs)
 {
 	u32 mr_addr;
+	const struct lpddr2_mr_regs *mr_regs;
 
+	get_lpddr2_mr_regs(&mr_regs);
 	/* Wait till device auto initialization is complete */
 	while (get_mr(base, cs, LPDDR2_MR0) & LPDDR2_MR0_DAI_MASK)
 		;
-	set_mr(base, cs, LPDDR2_MR10, MR10_ZQ_ZQINIT);
+	set_mr(base, cs, LPDDR2_MR10, mr_regs->mr10);
 	/*
 	 * tZQINIT = 1 us
 	 * Enough loops assuming a maximum of 2GHz
@@ -122,22 +137,18 @@
 
 	sdelay(2000);
 
-	if (omap_revision() >= OMAP5430_ES1_0)
-		set_mr(base, cs, LPDDR2_MR1, MR1_BL_8_BT_SEQ_WRAP_EN_NWR_8);
-	else
-		set_mr(base, cs, LPDDR2_MR1, MR1_BL_8_BT_SEQ_WRAP_EN_NWR_3);
-
-	set_mr(base, cs, LPDDR2_MR16, MR16_REF_FULL_ARRAY);
+	set_mr(base, cs, LPDDR2_MR1, mr_regs->mr1);
+	set_mr(base, cs, LPDDR2_MR16, mr_regs->mr16);
 
 	/*
 	 * Enable refresh along with writing MR2
 	 * Encoding of RL in MR2 is (RL - 2)
 	 */
 	mr_addr = LPDDR2_MR2 | EMIF_REG_REFRESH_EN_MASK;
-	set_mr(base, cs, mr_addr, RL_FINAL - 2);
+	set_mr(base, cs, mr_addr, mr_regs->mr2);
 
-	if (omap_revision() >= OMAP5430_ES1_0)
-		set_mr(base, cs, LPDDR2_MR3, 0x1);
+	if (mr_regs->mr3 > 0)
+		set_mr(base, cs, LPDDR2_MR3, mr_regs->mr3);
 }
 
 static void lpddr2_init(u32 base, const struct emif_regs *regs)
@@ -255,9 +266,6 @@
 static void ddr3_init(u32 base, const struct emif_regs *regs)
 {
 	struct emif_reg_struct *emif = (struct emif_reg_struct *)base;
-	u32 *ext_phy_ctrl_base = 0;
-	u32 *emif_ext_phy_ctrl_base = 0;
-	u32 i = 0;
 
 	/*
 	 * Set SDRAM_CONFIG and PHY control registers to locked frequency
@@ -277,27 +285,7 @@
 	writel(regs->ref_ctrl, &emif->emif_sdram_ref_ctrl);
 	writel(regs->read_idle_ctrl, &emif->emif_read_idlectrl);
 
-	ext_phy_ctrl_base = (u32 *) &(regs->emif_ddr_ext_phy_ctrl_1);
-	emif_ext_phy_ctrl_base = (u32 *) &(emif->emif_ddr_ext_phy_ctrl_1);
-
-	/* Configure external phy control timing registers */
-	for (i = 0; i < EMIF_EXT_PHY_CTRL_TIMING_REG; i++) {
-		writel(*ext_phy_ctrl_base, emif_ext_phy_ctrl_base++);
-		/* Update shadow registers */
-		writel(*ext_phy_ctrl_base++, emif_ext_phy_ctrl_base++);
-	}
-
-	/*
-	 * external phy 6-24 registers do not change with
-	 * ddr frequency
-	 */
-	for (i = 0; i < EMIF_EXT_PHY_CTRL_CONST_REG; i++) {
-		writel(ddr3_ext_phy_ctrl_const_base[i],
-					emif_ext_phy_ctrl_base++);
-		/* Update shadow registers */
-		writel(ddr3_ext_phy_ctrl_const_base[i],
-					emif_ext_phy_ctrl_base++);
-	}
+	do_ext_phy_settings(base, regs);
 
 	/* enable leveling */
 	writel(regs->emif_rd_wr_lvl_rmp_ctl, &emif->emif_rd_wr_lvl_rmp_ctl);
@@ -1079,7 +1067,7 @@
 	 * OPP to another)
 	 */
 	if (!(in_sdram || warm_reset())) {
-		if (omap_revision() != OMAP5432_ES1_0)
+		if (emif_sdram_type() == EMIF_SDRAM_TYPE_LPDDR2)
 			lpddr2_init(base, regs);
 		else
 			ddr3_init(base, regs);
@@ -1096,9 +1084,6 @@
 	struct emif_reg_struct *emif = (struct emif_reg_struct *)base;
 	u32 omap_rev = omap_revision();
 
-	if (omap_rev == OMAP5430_ES1_0)
-		return;
-
 	/* reset phy on ES2.0 */
 	if (omap_rev == OMAP4430_ES2_0)
 		emif_reset_phy(base);
@@ -1206,7 +1191,7 @@
 	writel(lisa_map_regs->dmm_lisa_map_0,
 		&hw_lisa_map_regs->dmm_lisa_map_0);
 
-	if (omap_revision() >= OMAP4460_ES1_0) {
+	if (lisa_map_regs->is_ma_present) {
 		hw_lisa_map_regs =
 		    (struct dmm_lisa_map_regs *)MA_BASE;
 
@@ -1264,7 +1249,7 @@
 void sdram_init(void)
 {
 	u32 in_sdram, size_prog, size_detect;
-	u32 omap_rev = omap_revision();
+	u32 sdram_type = emif_sdram_type();
 
 	debug(">>sdram_init()\n");
 
@@ -1275,10 +1260,10 @@
 	debug("in_sdram = %d\n", in_sdram);
 
 	if (!(in_sdram || warm_reset())) {
-		if (omap_rev != OMAP5432_ES1_0)
-			bypass_dpll(&prcm->cm_clkmode_dpll_core);
+		if (sdram_type == EMIF_SDRAM_TYPE_LPDDR2)
+			bypass_dpll((*prcm)->cm_clkmode_dpll_core);
 		else
-			writel(CM_DLL_CTRL_NO_OVERRIDE, &prcm->cm_dll_ctrl);
+			writel(CM_DLL_CTRL_NO_OVERRIDE, (*prcm)->cm_dll_ctrl);
 	}
 
 	if (!in_sdram)
@@ -1298,7 +1283,7 @@
 	}
 
 	/* for the shadow registers to take effect */
-	if (omap_rev != OMAP5432_ES1_0)
+	if (sdram_type == EMIF_SDRAM_TYPE_LPDDR2)
 		freq_update_core();
 
 	/* Do some testing after the init */
diff --git a/arch/arm/cpu/armv7/omap-common/hwinit-common.c b/arch/arm/cpu/armv7/omap-common/hwinit-common.c
index 9ef10bd..05ff2e8 100644
--- a/arch/arm/cpu/armv7/omap-common/hwinit-common.c
+++ b/arch/arm/cpu/armv7/omap-common/hwinit-common.c
@@ -32,6 +32,8 @@
 #include <asm/arch/sys_proto.h>
 #include <asm/sizes.h>
 #include <asm/emif.h>
+#include <asm/omap_common.h>
+#include <linux/compiler.h>
 
 DECLARE_GLOBAL_DATA_PTR;
 
@@ -79,12 +81,17 @@
 void omap_rev_string(void)
 {
 	u32 omap_rev = omap_revision();
+	u32 soc_variant	= (omap_rev & 0xF0000000) >> 28;
 	u32 omap_variant = (omap_rev & 0xFFFF0000) >> 16;
 	u32 major_rev = (omap_rev & 0x00000F00) >> 8;
 	u32 minor_rev = (omap_rev & 0x000000F0) >> 4;
 
-	printf("OMAP%x ES%x.%x\n", omap_variant, major_rev,
-		minor_rev);
+	if (soc_variant)
+		printf("OMAP");
+	else
+		printf("DRA");
+	printf("%x ES%x.%x\n", omap_variant, major_rev,
+	       minor_rev);
 }
 
 #ifdef CONFIG_SPL_BUILD
@@ -99,6 +106,10 @@
 }
 #endif
 
+void __weak srcomp_enable(void)
+{
+}
+
 /*
  * Routine: s_init
  * Description: Does early system init of watchdog, muxing,  andclocks
@@ -116,6 +127,8 @@
 void s_init(void)
 {
 	init_omap_revision();
+	hw_data_init();
+
 #ifdef CONFIG_SPL_BUILD
 	if (warm_reset() && (omap_revision() <= OMAP5430_ES1_0))
 		force_emif_self_refresh();
@@ -123,6 +136,7 @@
 	watchdog_init();
 	set_mux_conf_regs();
 #ifdef CONFIG_SPL_BUILD
+	srcomp_enable();
 	setup_clocks_for_console();
 
 	gd = &gdata;
@@ -235,10 +249,7 @@
  */
 u32 get_device_type(void)
 {
-	struct omap_sys_ctrl_regs *ctrl =
-		      (struct omap_sys_ctrl_regs *) SYSCTRL_GENERAL_CORE_BASE;
-
-	return (readl(&ctrl->control_status) &
+	return (readl((*ctrl)->control_status) &
 				      (DEVICE_TYPE_MASK)) >> DEVICE_TYPE_SHIFT;
 }
 
diff --git a/arch/arm/cpu/armv7/omap-common/u-boot-spl.lds b/arch/arm/cpu/armv7/omap-common/u-boot-spl.lds
index 40d64af..efae381 100644
--- a/arch/arm/cpu/armv7/omap-common/u-boot-spl.lds
+++ b/arch/arm/cpu/armv7/omap-common/u-boot-spl.lds
@@ -48,10 +48,6 @@
 	. = ALIGN(4);
 	.data : { *(SORT_BY_ALIGNMENT(.data*)) } >.sram
 
-	.u_boot_list : {
-		#include <u-boot.lst>
-	}
-
 	. = ALIGN(4);
 	__image_copy_end = .;
 	_end = .;
diff --git a/arch/arm/cpu/armv7/omap-common/vc.c b/arch/arm/cpu/armv7/omap-common/vc.c
index a045b77..e6e5f78 100644
--- a/arch/arm/cpu/armv7/omap-common/vc.c
+++ b/arch/arm/cpu/armv7/omap-common/vc.c
@@ -81,13 +81,13 @@
 	cycles_low -= 7;
 	val = (cycles_hi << PRM_VC_CFG_I2C_CLK_SCLH_SHIFT) |
 	       (cycles_low << PRM_VC_CFG_I2C_CLK_SCLL_SHIFT);
-	writel(val, &prcm->prm_vc_cfg_i2c_clk);
+	writel(val, (*prcm)->prm_vc_cfg_i2c_clk);
 
 	val = CONFIG_OMAP_VC_I2C_HS_MCODE <<
 		PRM_VC_CFG_I2C_MODE_HSMCODE_SHIFT;
 	/* No HS mode for now */
 	val &= ~PRM_VC_CFG_I2C_MODE_HSMODEEN_BIT;
-	writel(val, &prcm->prm_vc_cfg_i2c_mode);
+	writel(val, (*prcm)->prm_vc_cfg_i2c_mode);
 }
 
 /**
@@ -113,14 +113,15 @@
 	reg_val = sa << PRM_VC_VAL_BYPASS_SLAVEADDR_SHIFT |
 	    reg_addr << PRM_VC_VAL_BYPASS_REGADDR_SHIFT |
 	    reg_data << PRM_VC_VAL_BYPASS_DATA_SHIFT;
-	writel(reg_val, &prcm->prm_vc_val_bypass);
+	writel(reg_val, (*prcm)->prm_vc_val_bypass);
 
 	/* Signal VC to send data */
-	writel(reg_val | PRM_VC_VAL_BYPASS_VALID_BIT, &prcm->prm_vc_val_bypass);
+	writel(reg_val | PRM_VC_VAL_BYPASS_VALID_BIT,
+				(*prcm)->prm_vc_val_bypass);
 
 	/* Wait on VC to complete transmission */
 	do {
-		reg_val = readl(&prcm->prm_vc_val_bypass) &
+		reg_val = readl((*prcm)->prm_vc_val_bypass) &
 				PRM_VC_VAL_BYPASS_VALID_BIT;
 		if (!reg_val)
 			break;
diff --git a/arch/arm/cpu/armv7/omap3/board.c b/arch/arm/cpu/armv7/omap3/board.c
index 89c587e..c6d9a42 100644
--- a/arch/arm/cpu/armv7/omap3/board.c
+++ b/arch/arm/cpu/armv7/omap3/board.c
@@ -98,11 +98,11 @@
 {
 	switch (spl_boot_device()) {
 	case BOOT_DEVICE_MMC1:
-		omap_mmc_init(0, 0, 0);
+		omap_mmc_init(0, 0, 0, -1, -1);
 		break;
 	case BOOT_DEVICE_MMC2:
 	case BOOT_DEVICE_MMC2_2:
-		omap_mmc_init(1, 0, 0);
+		omap_mmc_init(1, 0, 0, -1, -1);
 		break;
 	}
 	return 0;
@@ -110,7 +110,7 @@
 
 void spl_board_init(void)
 {
-#ifdef CONFIG_SPL_NAND_SUPPORT
+#if defined(CONFIG_SPL_NAND_SUPPORT) || defined(CONFIG_SPL_ONENAND_SUPPORT)
 	gpmc_init();
 #endif
 #ifdef CONFIG_SPL_I2C_SUPPORT
diff --git a/arch/arm/cpu/armv7/omap4/Makefile b/arch/arm/cpu/armv7/omap4/Makefile
index 83160a2..40808d1 100644
--- a/arch/arm/cpu/armv7/omap4/Makefile
+++ b/arch/arm/cpu/armv7/omap4/Makefile
@@ -27,8 +27,9 @@
 
 COBJS	+= sdram_elpida.o
 COBJS	+= hwinit.o
-COBJS	+= clocks.o
 COBJS	+= emif.o
+COBJS	+= prcm-regs.o
+COBJS	+= hw_data.o
 
 SRCS	:= $(SOBJS:.o=.S) $(COBJS:.o=.c)
 OBJS	:= $(addprefix $(obj),$(COBJS) $(SOBJS))
diff --git a/arch/arm/cpu/armv7/omap4/clocks.c b/arch/arm/cpu/armv7/omap4/clocks.c
deleted file mode 100644
index 12c5803..0000000
--- a/arch/arm/cpu/armv7/omap4/clocks.c
+++ /dev/null
@@ -1,517 +0,0 @@
-/*
- *
- * Clock initialization for OMAP4
- *
- * (C) Copyright 2010
- * Texas Instruments, <www.ti.com>
- *
- * Aneesh V <aneesh@ti.com>
- *
- * Based on previous work by:
- *	Santosh Shilimkar <santosh.shilimkar@ti.com>
- *	Rajendra Nayak <rnayak@ti.com>
- *
- * See file CREDITS for list of people who contributed to this
- * project.
- *
- * This program is free software; you can redistribute it and/or
- * modify it under the terms of the GNU General Public License as
- * published by the Free Software Foundation; either version 2 of
- * the License, or (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
- * MA 02111-1307 USA
- */
-#include <common.h>
-#include <asm/omap_common.h>
-#include <asm/gpio.h>
-#include <asm/arch/clocks.h>
-#include <asm/arch/sys_proto.h>
-#include <asm/utils.h>
-#include <asm/omap_gpio.h>
-
-#ifndef CONFIG_SPL_BUILD
-/*
- * printing to console doesn't work unless
- * this code is executed from SPL
- */
-#define printf(fmt, args...)
-#define puts(s)
-#endif /* !CONFIG_SPL_BUILD */
-
-struct omap4_prcm_regs *const prcm = (struct omap4_prcm_regs *)0x4A004100;
-
-const u32 sys_clk_array[8] = {
-	12000000,	       /* 12 MHz */
-	13000000,	       /* 13 MHz */
-	16800000,	       /* 16.8 MHz */
-	19200000,	       /* 19.2 MHz */
-	26000000,	       /* 26 MHz */
-	27000000,	       /* 27 MHz */
-	38400000,	       /* 38.4 MHz */
-};
-
-/*
- * The M & N values in the following tables are created using the
- * following tool:
- * tools/omap/clocks_get_m_n.c
- * Please use this tool for creating the table for any new frequency.
- */
-
-/* dpll locked at 1400 MHz MPU clk at 700 MHz(OPP100) - DCC OFF */
-static const struct dpll_params mpu_dpll_params_1400mhz[NUM_SYS_CLKS] = {
-	{175, 2, 1, -1, -1, -1, -1, -1},	/* 12 MHz   */
-	{700, 12, 1, -1, -1, -1, -1, -1},	/* 13 MHz   */
-	{125, 2, 1, -1, -1, -1, -1, -1},	/* 16.8 MHz */
-	{401, 10, 1, -1, -1, -1, -1, -1},	/* 19.2 MHz */
-	{350, 12, 1, -1, -1, -1, -1, -1},	/* 26 MHz   */
-	{700, 26, 1, -1, -1, -1, -1, -1},	/* 27 MHz   */
-	{638, 34, 1, -1, -1, -1, -1, -1}	/* 38.4 MHz */
-};
-
-/* dpll locked at 1584 MHz - MPU clk at 792 MHz(OPP Turbo 4430) */
-static const struct dpll_params mpu_dpll_params_1600mhz[NUM_SYS_CLKS] = {
-	{200, 2, 1, -1, -1, -1, -1, -1},	/* 12 MHz   */
-	{800, 12, 1, -1, -1, -1, -1, -1},	/* 13 MHz   */
-	{619, 12, 1, -1, -1, -1, -1, -1},	/* 16.8 MHz */
-	{125, 2, 1, -1, -1, -1, -1, -1},	/* 19.2 MHz */
-	{400, 12, 1, -1, -1, -1, -1, -1},	/* 26 MHz   */
-	{800, 26, 1, -1, -1, -1, -1, -1},	/* 27 MHz   */
-	{125, 5, 1, -1, -1, -1, -1, -1}		/* 38.4 MHz */
-};
-
-/* dpll locked at 1200 MHz - MPU clk at 600 MHz */
-static const struct dpll_params mpu_dpll_params_1200mhz[NUM_SYS_CLKS] = {
-	{50, 0, 1, -1, -1, -1, -1, -1},		/* 12 MHz   */
-	{600, 12, 1, -1, -1, -1, -1, -1},	/* 13 MHz   */
-	{250, 6, 1, -1, -1, -1, -1, -1},	/* 16.8 MHz */
-	{125, 3, 1, -1, -1, -1, -1, -1},	/* 19.2 MHz */
-	{300, 12, 1, -1, -1, -1, -1, -1},	/* 26 MHz   */
-	{200, 8, 1, -1, -1, -1, -1, -1},	/* 27 MHz   */
-	{125, 7, 1, -1, -1, -1, -1, -1}		/* 38.4 MHz */
-};
-
-static const struct dpll_params core_dpll_params_1600mhz[NUM_SYS_CLKS] = {
-	{200, 2, 1, 5, 8, 4, 6, 5},	/* 12 MHz   */
-	{800, 12, 1, 5, 8, 4, 6, 5},	/* 13 MHz   */
-	{619, 12, 1, 5, 8, 4, 6, 5},	/* 16.8 MHz */
-	{125, 2, 1, 5, 8, 4, 6, 5},	/* 19.2 MHz */
-	{400, 12, 1, 5, 8, 4, 6, 5},	/* 26 MHz   */
-	{800, 26, 1, 5, 8, 4, 6, 5},	/* 27 MHz   */
-	{125, 5, 1, 5, 8, 4, 6, 5}	/* 38.4 MHz */
-};
-
-static const struct dpll_params core_dpll_params_es1_1524mhz[NUM_SYS_CLKS] = {
-	{127, 1, 1, 5, 8, 4, 6, 5},	/* 12 MHz   */
-	{762, 12, 1, 5, 8, 4, 6, 5},	/* 13 MHz   */
-	{635, 13, 1, 5, 8, 4, 6, 5},	/* 16.8 MHz */
-	{635, 15, 1, 5, 8, 4, 6, 5},	/* 19.2 MHz */
-	{381, 12, 1, 5, 8, 4, 6, 5},	/* 26 MHz   */
-	{254, 8, 1, 5, 8, 4, 6, 5},	/* 27 MHz   */
-	{496, 24, 1, 5, 8, 4, 6, 5}	/* 38.4 MHz */
-};
-
-static const struct dpll_params
-		core_dpll_params_es2_1600mhz_ddr200mhz[NUM_SYS_CLKS] = {
-	{200, 2, 2, 5, 8, 4, 6, 5},	/* 12 MHz   */
-	{800, 12, 2, 5, 8, 4, 6, 5},	/* 13 MHz   */
-	{619, 12, 2, 5, 8, 4, 6, 5},	/* 16.8 MHz */
-	{125, 2, 2, 5, 8, 4, 6, 5},	/* 19.2 MHz */
-	{400, 12, 2, 5, 8, 4, 6, 5},	/* 26 MHz   */
-	{800, 26, 2, 5, 8, 4, 6, 5},	/* 27 MHz   */
-	{125, 5, 2, 5, 8, 4, 6, 5}	/* 38.4 MHz */
-};
-
-static const struct dpll_params per_dpll_params_1536mhz[NUM_SYS_CLKS] = {
-	{64, 0, 8, 6, 12, 9, 4, 5},	/* 12 MHz   */
-	{768, 12, 8, 6, 12, 9, 4, 5},	/* 13 MHz   */
-	{320, 6, 8, 6, 12, 9, 4, 5},	/* 16.8 MHz */
-	{40, 0, 8, 6, 12, 9, 4, 5},	/* 19.2 MHz */
-	{384, 12, 8, 6, 12, 9, 4, 5},	/* 26 MHz   */
-	{256, 8, 8, 6, 12, 9, 4, 5},	/* 27 MHz   */
-	{20, 0, 8, 6, 12, 9, 4, 5}	/* 38.4 MHz */
-};
-
-static const struct dpll_params iva_dpll_params_1862mhz[NUM_SYS_CLKS] = {
-	{931, 11, -1, -1, 4, 7, -1, -1},	/* 12 MHz   */
-	{931, 12, -1, -1, 4, 7, -1, -1},	/* 13 MHz   */
-	{665, 11, -1, -1, 4, 7, -1, -1},	/* 16.8 MHz */
-	{727, 14, -1, -1, 4, 7, -1, -1},	/* 19.2 MHz */
-	{931, 25, -1, -1, 4, 7, -1, -1},	/* 26 MHz   */
-	{931, 26, -1, -1, 4, 7, -1, -1},	/* 27 MHz   */
-	{291, 11, -1, -1, 4, 7, -1, -1}		/* 38.4 MHz */
-};
-
-/* ABE M & N values with sys_clk as source */
-static const struct dpll_params
-		abe_dpll_params_sysclk_196608khz[NUM_SYS_CLKS] = {
-	{49, 5, 1, 1, -1, -1, -1, -1},	/* 12 MHz   */
-	{68, 8, 1, 1, -1, -1, -1, -1},	/* 13 MHz   */
-	{35, 5, 1, 1, -1, -1, -1, -1},	/* 16.8 MHz */
-	{46, 8, 1, 1, -1, -1, -1, -1},	/* 19.2 MHz */
-	{34, 8, 1, 1, -1, -1, -1, -1},	/* 26 MHz   */
-	{29, 7, 1, 1, -1, -1, -1, -1},	/* 27 MHz   */
-	{64, 24, 1, 1, -1, -1, -1, -1}	/* 38.4 MHz */
-};
-
-/* ABE M & N values with 32K clock as source */
-static const struct dpll_params abe_dpll_params_32k_196608khz = {
-	750, 0, 1, 1, -1, -1, -1, -1
-};
-
-static const struct dpll_params usb_dpll_params_1920mhz[NUM_SYS_CLKS] = {
-	{80, 0, 2, -1, -1, -1, -1, -1},		/* 12 MHz   */
-	{960, 12, 2, -1, -1, -1, -1, -1},	/* 13 MHz   */
-	{400, 6, 2, -1, -1, -1, -1, -1},	/* 16.8 MHz */
-	{50, 0, 2, -1, -1, -1, -1, -1},		/* 19.2 MHz */
-	{480, 12, 2, -1, -1, -1, -1, -1},	/* 26 MHz   */
-	{320, 8, 2, -1, -1, -1, -1, -1},	/* 27 MHz   */
-	{25, 0, 2, -1, -1, -1, -1, -1}		/* 38.4 MHz */
-};
-
-void setup_post_dividers(u32 *const base, const struct dpll_params *params)
-{
-	struct dpll_regs *const dpll_regs = (struct dpll_regs *)base;
-
-	/* Setup post-dividers */
-	if (params->m2 >= 0)
-		writel(params->m2, &dpll_regs->cm_div_m2_dpll);
-	if (params->m3 >= 0)
-		writel(params->m3, &dpll_regs->cm_div_m3_dpll);
-	if (params->m4 >= 0)
-		writel(params->m4, &dpll_regs->cm_div_m4_dpll);
-	if (params->m5 >= 0)
-		writel(params->m5, &dpll_regs->cm_div_m5_dpll);
-	if (params->m6 >= 0)
-		writel(params->m6, &dpll_regs->cm_div_m6_dpll);
-	if (params->m7 >= 0)
-		writel(params->m7, &dpll_regs->cm_div_m7_dpll);
-}
-
-/*
- * Lock MPU dpll
- *
- * Resulting MPU frequencies:
- * 4430 ES1.0	: 600 MHz
- * 4430 ES2.x	: 792 MHz (OPP Turbo)
- * 4460		: 920 MHz (OPP Turbo) - DCC disabled
- */
-const struct dpll_params *get_mpu_dpll_params(void)
-{
-	u32 omap_rev, sysclk_ind;
-
-	omap_rev = omap_revision();
-	sysclk_ind = get_sys_clk_index();
-
-	if (omap_rev == OMAP4430_ES1_0)
-		return &mpu_dpll_params_1200mhz[sysclk_ind];
-	else if (omap_rev < OMAP4460_ES1_0)
-		return &mpu_dpll_params_1600mhz[sysclk_ind];
-	else
-		return &mpu_dpll_params_1400mhz[sysclk_ind];
-}
-
-const struct dpll_params *get_core_dpll_params(void)
-{
-	u32 sysclk_ind = get_sys_clk_index();
-
-	switch (omap_revision()) {
-	case OMAP4430_ES1_0:
-		return &core_dpll_params_es1_1524mhz[sysclk_ind];
-	case OMAP4430_ES2_0:
-	case OMAP4430_SILICON_ID_INVALID:
-		 /* safest */
-		return &core_dpll_params_es2_1600mhz_ddr200mhz[sysclk_ind];
-	default:
-		return &core_dpll_params_1600mhz[sysclk_ind];
-	}
-}
-
-
-const struct dpll_params *get_per_dpll_params(void)
-{
-	u32 sysclk_ind = get_sys_clk_index();
-	return &per_dpll_params_1536mhz[sysclk_ind];
-}
-
-const struct dpll_params *get_iva_dpll_params(void)
-{
-	u32 sysclk_ind = get_sys_clk_index();
-	return &iva_dpll_params_1862mhz[sysclk_ind];
-}
-
-const struct dpll_params *get_usb_dpll_params(void)
-{
-	u32 sysclk_ind = get_sys_clk_index();
-	return &usb_dpll_params_1920mhz[sysclk_ind];
-}
-
-const struct dpll_params *get_abe_dpll_params(void)
-{
-#ifdef CONFIG_SYS_OMAP_ABE_SYSCK
-	u32 sysclk_ind = get_sys_clk_index();
-	return &abe_dpll_params_sysclk_196608khz[sysclk_ind];
-#else
-	return &abe_dpll_params_32k_196608khz;
-#endif
-}
-
-/*
- * Setup the voltages for vdd_mpu, vdd_core, and vdd_iva
- * We set the maximum voltages allowed here because Smart-Reflex is not
- * enabled in bootloader. Voltage initialization in the kernel will set
- * these to the nominal values after enabling Smart-Reflex
- */
-void scale_vcores(void)
-{
-	u32 volt, omap_rev;
-
-	omap_vc_init(PRM_VC_I2C_CHANNEL_FREQ_KHZ);
-
-	omap_rev = omap_revision();
-
-	/*
-	 * Scale Voltage rails:
-	 * 1. VDD_CORE
-	 * 3. VDD_MPU
-	 * 3. VDD_IVA
-	 */
-	if (omap_rev < OMAP4460_ES1_0) {
-		/*
-		 * OMAP4430:
-		 * VDD_CORE = TWL6030 VCORE3
-		 * VDD_MPU = TWL6030 VCORE1
-		 * VDD_IVA = TWL6030 VCORE2
-		 */
-		volt = 1200;
-		do_scale_vcore(SMPS_REG_ADDR_VCORE3, volt);
-
-		/*
-		 * note on VDD_MPU:
-		 * Setting a high voltage for Nitro mode as smart reflex is not
-		 * enabled. We use the maximum possible value in the AVS range
-		 * because the next higher voltage in the discrete range
-		 * (code >= 0b111010) is way too high.
-		 */
-		volt = 1325;
-		do_scale_vcore(SMPS_REG_ADDR_VCORE1, volt);
-		volt = 1200;
-		do_scale_vcore(SMPS_REG_ADDR_VCORE2, volt);
-
-	} else {
-		/*
-		 * OMAP4460:
-		 * VDD_CORE = TWL6030 VCORE1
-		 * VDD_MPU = TPS62361
-		 * VDD_IVA = TWL6030 VCORE2
-		 */
-		volt = 1200;
-		do_scale_vcore(SMPS_REG_ADDR_VCORE1, volt);
-		/* TPS62361 */
-		volt = 1203;
-		do_scale_tps62361(TPS62361_VSEL0_GPIO,
-				  TPS62361_REG_ADDR_SET1, volt);
-		/* VCORE 2 - supplies vdd_iva */
-		volt = 1200;
-		do_scale_vcore(SMPS_REG_ADDR_VCORE2, volt);
-	}
-}
-
-u32 get_offset_code(u32 offset)
-{
-	u32 offset_code, step = 12660; /* 12.66 mV represented in uV */
-
-	if (omap_revision() == OMAP4430_ES1_0)
-		offset -= PHOENIX_SMPS_BASE_VOLT_STD_MODE_UV;
-	else
-		offset -= PHOENIX_SMPS_BASE_VOLT_STD_MODE_WITH_OFFSET_UV;
-
-	offset_code = (offset + step - 1) / step;
-
-	/* The code starts at 1 not 0 */
-	return ++offset_code;
-}
-
-/*
- * Enable essential clock domains, modules and
- * do some additional special settings needed
- */
-void enable_basic_clocks(void)
-{
-	u32 *const clk_domains_essential[] = {
-		&prcm->cm_l4per_clkstctrl,
-		&prcm->cm_l3init_clkstctrl,
-		&prcm->cm_memif_clkstctrl,
-		&prcm->cm_l4cfg_clkstctrl,
-		0
-	};
-
-	u32 *const clk_modules_hw_auto_essential[] = {
-		&prcm->cm_l3_2_gpmc_clkctrl,
-		&prcm->cm_memif_emif_1_clkctrl,
-		&prcm->cm_memif_emif_2_clkctrl,
-		&prcm->cm_l4cfg_l4_cfg_clkctrl,
-		&prcm->cm_wkup_gpio1_clkctrl,
-		&prcm->cm_l4per_gpio2_clkctrl,
-		&prcm->cm_l4per_gpio3_clkctrl,
-		&prcm->cm_l4per_gpio4_clkctrl,
-		&prcm->cm_l4per_gpio5_clkctrl,
-		&prcm->cm_l4per_gpio6_clkctrl,
-		0
-	};
-
-	u32 *const clk_modules_explicit_en_essential[] = {
-		&prcm->cm_wkup_gptimer1_clkctrl,
-		&prcm->cm_l3init_hsmmc1_clkctrl,
-		&prcm->cm_l3init_hsmmc2_clkctrl,
-		&prcm->cm_l4per_gptimer2_clkctrl,
-		&prcm->cm_wkup_wdtimer2_clkctrl,
-		&prcm->cm_l4per_uart3_clkctrl,
-		0
-	};
-
-	/* Enable optional additional functional clock for GPIO4 */
-	setbits_le32(&prcm->cm_l4per_gpio4_clkctrl,
-			GPIO4_CLKCTRL_OPTFCLKEN_MASK);
-
-	/* Enable 96 MHz clock for MMC1 & MMC2 */
-	setbits_le32(&prcm->cm_l3init_hsmmc1_clkctrl,
-			HSMMC_CLKCTRL_CLKSEL_MASK);
-	setbits_le32(&prcm->cm_l3init_hsmmc2_clkctrl,
-			HSMMC_CLKCTRL_CLKSEL_MASK);
-
-	/* Select 32KHz clock as the source of GPTIMER1 */
-	setbits_le32(&prcm->cm_wkup_gptimer1_clkctrl,
-			GPTIMER1_CLKCTRL_CLKSEL_MASK);
-
-	/* Enable optional 48M functional clock for USB  PHY */
-	setbits_le32(&prcm->cm_l3init_usbphy_clkctrl,
-			USBPHY_CLKCTRL_OPTFCLKEN_PHY_48M_MASK);
-
-	do_enable_clocks(clk_domains_essential,
-			 clk_modules_hw_auto_essential,
-			 clk_modules_explicit_en_essential,
-			 1);
-}
-
-void enable_basic_uboot_clocks(void)
-{
-	u32 *const clk_domains_essential[] = {
-		0
-	};
-
-	u32 *const clk_modules_hw_auto_essential[] = {
-		&prcm->cm_l3init_hsusbotg_clkctrl,
-		&prcm->cm_l3init_usbphy_clkctrl,
-		&prcm->cm_l3init_usbphy_clkctrl,
-		&prcm->cm_clksel_usb_60mhz,
-		&prcm->cm_l3init_hsusbtll_clkctrl,
-		0
-	};
-
-	u32 *const clk_modules_explicit_en_essential[] = {
-		&prcm->cm_l4per_mcspi1_clkctrl,
-		&prcm->cm_l4per_i2c1_clkctrl,
-		&prcm->cm_l4per_i2c2_clkctrl,
-		&prcm->cm_l4per_i2c3_clkctrl,
-		&prcm->cm_l4per_i2c4_clkctrl,
-		&prcm->cm_l3init_hsusbhost_clkctrl,
-		0
-	};
-
-	do_enable_clocks(clk_domains_essential,
-			 clk_modules_hw_auto_essential,
-			 clk_modules_explicit_en_essential,
-			 1);
-}
-
-/*
- * Enable non-essential clock domains, modules and
- * do some additional special settings needed
- */
-void enable_non_essential_clocks(void)
-{
-	u32 *const clk_domains_non_essential[] = {
-		&prcm->cm_mpu_m3_clkstctrl,
-		&prcm->cm_ivahd_clkstctrl,
-		&prcm->cm_dsp_clkstctrl,
-		&prcm->cm_dss_clkstctrl,
-		&prcm->cm_sgx_clkstctrl,
-		&prcm->cm1_abe_clkstctrl,
-		&prcm->cm_c2c_clkstctrl,
-		&prcm->cm_cam_clkstctrl,
-		&prcm->cm_dss_clkstctrl,
-		&prcm->cm_sdma_clkstctrl,
-		0
-	};
-
-	u32 *const clk_modules_hw_auto_non_essential[] = {
-		&prcm->cm_l3instr_l3_3_clkctrl,
-		&prcm->cm_l3instr_l3_instr_clkctrl,
-		&prcm->cm_l3instr_intrconn_wp1_clkctrl,
-		&prcm->cm_l3init_hsi_clkctrl,
-		0
-	};
-
-	u32 *const clk_modules_explicit_en_non_essential[] = {
-		&prcm->cm1_abe_aess_clkctrl,
-		&prcm->cm1_abe_pdm_clkctrl,
-		&prcm->cm1_abe_dmic_clkctrl,
-		&prcm->cm1_abe_mcasp_clkctrl,
-		&prcm->cm1_abe_mcbsp1_clkctrl,
-		&prcm->cm1_abe_mcbsp2_clkctrl,
-		&prcm->cm1_abe_mcbsp3_clkctrl,
-		&prcm->cm1_abe_slimbus_clkctrl,
-		&prcm->cm1_abe_timer5_clkctrl,
-		&prcm->cm1_abe_timer6_clkctrl,
-		&prcm->cm1_abe_timer7_clkctrl,
-		&prcm->cm1_abe_timer8_clkctrl,
-		&prcm->cm1_abe_wdt3_clkctrl,
-		&prcm->cm_l4per_gptimer9_clkctrl,
-		&prcm->cm_l4per_gptimer10_clkctrl,
-		&prcm->cm_l4per_gptimer11_clkctrl,
-		&prcm->cm_l4per_gptimer3_clkctrl,
-		&prcm->cm_l4per_gptimer4_clkctrl,
-		&prcm->cm_l4per_hdq1w_clkctrl,
-		&prcm->cm_l4per_mcbsp4_clkctrl,
-		&prcm->cm_l4per_mcspi2_clkctrl,
-		&prcm->cm_l4per_mcspi3_clkctrl,
-		&prcm->cm_l4per_mcspi4_clkctrl,
-		&prcm->cm_l4per_mmcsd3_clkctrl,
-		&prcm->cm_l4per_mmcsd4_clkctrl,
-		&prcm->cm_l4per_mmcsd5_clkctrl,
-		&prcm->cm_l4per_uart1_clkctrl,
-		&prcm->cm_l4per_uart2_clkctrl,
-		&prcm->cm_l4per_uart4_clkctrl,
-		&prcm->cm_wkup_keyboard_clkctrl,
-		&prcm->cm_wkup_wdtimer2_clkctrl,
-		&prcm->cm_cam_iss_clkctrl,
-		&prcm->cm_cam_fdif_clkctrl,
-		&prcm->cm_dss_dss_clkctrl,
-		&prcm->cm_sgx_sgx_clkctrl,
-		0
-	};
-
-	/* Enable optional functional clock for ISS */
-	setbits_le32(&prcm->cm_cam_iss_clkctrl, ISS_CLKCTRL_OPTFCLKEN_MASK);
-
-	/* Enable all optional functional clocks of DSS */
-	setbits_le32(&prcm->cm_dss_dss_clkctrl, DSS_CLKCTRL_OPTFCLKEN_MASK);
-
-	do_enable_clocks(clk_domains_non_essential,
-			 clk_modules_hw_auto_non_essential,
-			 clk_modules_explicit_en_non_essential,
-			 0);
-
-	/* Put camera module in no sleep mode */
-	clrsetbits_le32(&prcm->cm_cam_clkstctrl, MODULE_CLKCTRL_MODULEMODE_MASK,
-			CD_CLKCTRL_CLKTRCTRL_NO_SLEEP <<
-			MODULE_CLKCTRL_MODULEMODE_SHIFT);
-}
diff --git a/arch/arm/cpu/armv7/omap4/hw_data.c b/arch/arm/cpu/armv7/omap4/hw_data.c
new file mode 100644
index 0000000..7551b98
--- /dev/null
+++ b/arch/arm/cpu/armv7/omap4/hw_data.c
@@ -0,0 +1,491 @@
+/*
+ *
+ * HW data initialization for OMAP4
+ *
+ * (C) Copyright 2013
+ * Texas Instruments, <www.ti.com>
+ *
+ * Sricharan R <r.sricharan@ti.com>
+ *
+ * See file CREDITS for list of people who contributed to this
+ * project.
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of
+ * the License, or (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
+ * MA 02111-1307 USA
+ */
+#include <common.h>
+#include <asm/arch/omap.h>
+#include <asm/arch/sys_proto.h>
+#include <asm/omap_common.h>
+#include <asm/arch/clocks.h>
+#include <asm/omap_gpio.h>
+#include <asm/io.h>
+
+struct prcm_regs const **prcm =
+			(struct prcm_regs const **) OMAP_SRAM_SCRATCH_PRCM_PTR;
+struct dplls const **dplls_data =
+			(struct dplls const **) OMAP_SRAM_SCRATCH_DPLLS_PTR;
+struct vcores_data const **omap_vcores =
+		(struct vcores_data const **) OMAP_SRAM_SCRATCH_VCORES_PTR;
+struct omap_sys_ctrl_regs const **ctrl =
+	(struct omap_sys_ctrl_regs const **)OMAP4_SRAM_SCRATCH_SYS_CTRL;
+
+/*
+ * The M & N values in the following tables are created using the
+ * following tool:
+ * tools/omap/clocks_get_m_n.c
+ * Please use this tool for creating the table for any new frequency.
+ */
+
+/*
+ * dpll locked at 1400 MHz MPU clk at 700 MHz(OPP100) - DCC OFF
+ * OMAP4460 OPP_NOM frequency
+ */
+static const struct dpll_params mpu_dpll_params_1400mhz[NUM_SYS_CLKS] = {
+	{175, 2, 1, -1, -1, -1, -1, -1, -1, -1, -1, -1},	/* 12 MHz   */
+	{700, 12, 1, -1, -1, -1, -1, -1, -1, -1, -1, -1},	/* 13 MHz   */
+	{125, 2, 1, -1, -1, -1, -1, -1, -1, -1, -1, -1},	/* 16.8 MHz */
+	{401, 10, 1, -1, -1, -1, -1, -1, -1, -1, -1, -1},	/* 19.2 MHz */
+	{350, 12, 1, -1, -1, -1, -1, -1, -1, -1, -1, -1},	/* 26 MHz   */
+	{700, 26, 1, -1, -1, -1, -1, -1, -1, -1, -1, -1},	/* 27 MHz   */
+	{638, 34, 1, -1, -1, -1, -1, -1, -1, -1, -1, -1}	/* 38.4 MHz */
+};
+
+/*
+ * dpll locked at 1600 MHz - MPU clk at 800 MHz(OPP Turbo 4430)
+ * OMAP4430 OPP_TURBO frequency
+ */
+static const struct dpll_params mpu_dpll_params_1600mhz[NUM_SYS_CLKS] = {
+	{200, 2, 1, -1, -1, -1, -1, -1, -1, -1, -1, -1},	/* 12 MHz   */
+	{800, 12, 1, -1, -1, -1, -1, -1, -1, -1, -1, -1},	/* 13 MHz   */
+	{619, 12, 1, -1, -1, -1, -1, -1, -1, -1, -1, -1},	/* 16.8 MHz */
+	{125, 2, 1, -1, -1, -1, -1, -1, -1, -1, -1, -1},	/* 19.2 MHz */
+	{400, 12, 1, -1, -1, -1, -1, -1, -1, -1, -1, -1},	/* 26 MHz   */
+	{800, 26, 1, -1, -1, -1, -1, -1, -1, -1, -1, -1},	/* 27 MHz   */
+	{125, 5, 1, -1, -1, -1, -1, -1, -1, -1, -1, -1}		/* 38.4 MHz */
+};
+
+/*
+ * dpll locked at 1200 MHz - MPU clk at 600 MHz
+ * OMAP4430 OPP_NOM frequency
+ */
+static const struct dpll_params mpu_dpll_params_1200mhz[NUM_SYS_CLKS] = {
+	{50, 0, 1, -1, -1, -1, -1, -1, -1, -1, -1, -1},		/* 12 MHz   */
+	{600, 12, 1, -1, -1, -1, -1, -1, -1, -1, -1, -1},	/* 13 MHz   */
+	{250, 6, 1, -1, -1, -1, -1, -1, -1, -1, -1, -1},	/* 16.8 MHz */
+	{125, 3, 1, -1, -1, -1, -1, -1, -1, -1, -1, -1},	/* 19.2 MHz */
+	{300, 12, 1, -1, -1, -1, -1, -1, -1, -1, -1, -1},	/* 26 MHz   */
+	{200, 8, 1, -1, -1, -1, -1, -1, -1, -1, -1, -1},	/* 27 MHz   */
+	{125, 7, 1, -1, -1, -1, -1, -1, -1, -1, -1, -1}		/* 38.4 MHz */
+};
+
+/* OMAP4460 OPP_NOM frequency */
+static const struct dpll_params core_dpll_params_1600mhz[NUM_SYS_CLKS] = {
+	{200, 2, 1, 5, 8, 4, 6, 5, -1, -1, -1, -1},	/* 12 MHz   */
+	{800, 12, 1, 5, 8, 4, 6, 5, -1, -1, -1, -1},	/* 13 MHz   */
+	{619, 12, 1, 5, 8, 4, 6, 5, -1, -1, -1, -1},	/* 16.8 MHz */
+	{125, 2, 1, 5, 8, 4, 6, 5, -1, -1, -1, -1},	/* 19.2 MHz */
+	{400, 12, 1, 5, 8, 4, 6, 5, -1, -1, -1, -1},	/* 26 MHz   */
+	{800, 26, 1, 5, 8, 4, 6, 5, -1, -1, -1, -1},	/* 27 MHz   */
+	{125, 5, 1, 5, 8, 4, 6, 5, -1, -1, -1, -1}	/* 38.4 MHz */
+};
+
+/* OMAP4430 ES1 OPP_NOM frequency */
+static const struct dpll_params core_dpll_params_es1_1524mhz[NUM_SYS_CLKS] = {
+	{127, 1, 1, 5, 8, 4, 6, 5, -1, -1, -1, -1},	/* 12 MHz   */
+	{762, 12, 1, 5, 8, 4, 6, 5, -1, -1, -1, -1},	/* 13 MHz   */
+	{635, 13, 1, 5, 8, 4, 6, 5, -1, -1, -1, -1},	/* 16.8 MHz */
+	{635, 15, 1, 5, 8, 4, 6, 5, -1, -1, -1, -1},	/* 19.2 MHz */
+	{381, 12, 1, 5, 8, 4, 6, 5, -1, -1, -1, -1},	/* 26 MHz   */
+	{254, 8, 1, 5, 8, 4, 6, 5, -1, -1, -1, -1},	/* 27 MHz   */
+	{496, 24, 1, 5, 8, 4, 6, 5, -1, -1, -1, -1}	/* 38.4 MHz */
+};
+
+/* OMAP4430 ES2.X OPP_NOM frequency */
+static const struct dpll_params
+		core_dpll_params_es2_1600mhz_ddr200mhz[NUM_SYS_CLKS] = {
+	{200, 2, 2, 5, 8, 4, 6, 5, -1, -1, -1, -1},	/* 12 MHz   */
+	{800, 12, 2, 5, 8, 4, 6, 5, -1, -1, -1, -1},	/* 13 MHz   */
+	{619, 12, 2, 5, 8, 4, 6, 5, -1, -1, -1, -1},	/* 16.8 MHz */
+	{125, 2, 2, 5, 8, 4, 6, 5, -1, -1, -1, -1},	/* 19.2 MHz */
+	{400, 12, 2, 5, 8, 4, 6, 5, -1, -1, -1, -1},	/* 26 MHz   */
+	{800, 26, 2, 5, 8, 4, 6, 5, -1, -1, -1, -1},	/* 27 MHz   */
+	{125, 5, 2, 5, 8, 4, 6, 5, -1, -1, -1, -1}	/* 38.4 MHz */
+};
+
+static const struct dpll_params per_dpll_params_1536mhz[NUM_SYS_CLKS] = {
+	{64, 0, 8, 6, 12, 9, 4, 5, -1, -1, -1, -1},	/* 12 MHz   */
+	{768, 12, 8, 6, 12, 9, 4, 5, -1, -1, -1, -1},	/* 13 MHz   */
+	{320, 6, 8, 6, 12, 9, 4, 5, -1, -1, -1, -1},	/* 16.8 MHz */
+	{40, 0, 8, 6, 12, 9, 4, 5, -1, -1, -1, -1},	/* 19.2 MHz */
+	{384, 12, 8, 6, 12, 9, 4, 5, -1, -1, -1, -1},	/* 26 MHz   */
+	{256, 8, 8, 6, 12, 9, 4, 5, -1, -1, -1, -1},	/* 27 MHz   */
+	{20, 0, 8, 6, 12, 9, 4, 5, -1, -1, -1, -1}	/* 38.4 MHz */
+};
+
+static const struct dpll_params iva_dpll_params_1862mhz[NUM_SYS_CLKS] = {
+	{931, 11, -1, -1, 4, 7, -1, -1, -1, -1, -1, -1},	/* 12 MHz   */
+	{931, 12, -1, -1, 4, 7, -1, -1, -1, -1, -1, -1},	/* 13 MHz   */
+	{665, 11, -1, -1, 4, 7, -1, -1, -1, -1, -1, -1},	/* 16.8 MHz */
+	{727, 14, -1, -1, 4, 7, -1, -1, -1, -1, -1, -1},	/* 19.2 MHz */
+	{931, 25, -1, -1, 4, 7, -1, -1, -1, -1, -1, -1},	/* 26 MHz   */
+	{931, 26, -1, -1, 4, 7, -1, -1, -1, -1, -1, -1},	/* 27 MHz   */
+	{291, 11, -1, -1, 4, 7, -1, -1, -1, -1, -1, -1}		/* 38.4 MHz */
+};
+
+/* ABE M & N values with sys_clk as source */
+static const struct dpll_params
+		abe_dpll_params_sysclk_196608khz[NUM_SYS_CLKS] = {
+	{49, 5, 1, 1, -1, -1, -1, -1, -1, -1, -1, -1},	/* 12 MHz   */
+	{68, 8, 1, 1, -1, -1, -1, -1, -1, -1, -1, -1},	/* 13 MHz   */
+	{35, 5, 1, 1, -1, -1, -1, -1, -1, -1, -1, -1},	/* 16.8 MHz */
+	{46, 8, 1, 1, -1, -1, -1, -1, -1, -1, -1, -1},	/* 19.2 MHz */
+	{34, 8, 1, 1, -1, -1, -1, -1, -1, -1, -1, -1},	/* 26 MHz   */
+	{29, 7, 1, 1, -1, -1, -1, -1, -1, -1, -1, -1},	/* 27 MHz   */
+	{64, 24, 1, 1, -1, -1, -1, -1, -1, -1, -1, -1}	/* 38.4 MHz */
+};
+
+/* ABE M & N values with 32K clock as source */
+static const struct dpll_params abe_dpll_params_32k_196608khz = {
+	750, 0, 1, 1, -1, -1, -1, -1, -1, -1, -1, -1
+};
+
+static const struct dpll_params usb_dpll_params_1920mhz[NUM_SYS_CLKS] = {
+	{80, 0, 2, -1, -1, -1, -1, -1, -1, -1, -1, -1},		/* 12 MHz   */
+	{960, 12, 2, -1, -1, -1, -1, -1, -1, -1, -1, -1},	/* 13 MHz   */
+	{400, 6, 2, -1, -1, -1, -1, -1, -1, -1, -1, -1},	/* 16.8 MHz */
+	{50, 0, 2, -1, -1, -1, -1, -1, -1, -1, -1, -1},		/* 19.2 MHz */
+	{480, 12, 2, -1, -1, -1, -1, -1, -1, -1, -1, -1},	/* 26 MHz   */
+	{320, 8, 2, -1, -1, -1, -1, -1, -1, -1, -1, -1},	/* 27 MHz   */
+	{25, 0, 2, -1, -1, -1, -1, -1, -1, -1, -1, -1}		/* 38.4 MHz */
+};
+
+struct dplls omap4430_dplls_es1 = {
+	.mpu = mpu_dpll_params_1200mhz,
+	.core = core_dpll_params_es1_1524mhz,
+	.per = per_dpll_params_1536mhz,
+	.iva = iva_dpll_params_1862mhz,
+#ifdef CONFIG_SYS_OMAP_ABE_SYSCK
+	.abe = abe_dpll_params_sysclk_196608khz,
+#else
+	.abe = &abe_dpll_params_32k_196608khz,
+#endif
+	.usb = usb_dpll_params_1920mhz,
+	.ddr = NULL
+};
+
+struct dplls omap4430_dplls = {
+	.mpu = mpu_dpll_params_1200mhz,
+	.core = core_dpll_params_1600mhz,
+	.per = per_dpll_params_1536mhz,
+	.iva = iva_dpll_params_1862mhz,
+#ifdef CONFIG_SYS_OMAP_ABE_SYSCK
+	.abe = abe_dpll_params_sysclk_196608khz,
+#else
+	.abe = &abe_dpll_params_32k_196608khz,
+#endif
+	.usb = usb_dpll_params_1920mhz,
+	.ddr = NULL
+};
+
+struct dplls omap4460_dplls = {
+	.mpu = mpu_dpll_params_1400mhz,
+	.core = core_dpll_params_1600mhz,
+	.per = per_dpll_params_1536mhz,
+	.iva = iva_dpll_params_1862mhz,
+#ifdef CONFIG_SYS_OMAP_ABE_SYSCK
+	.abe = abe_dpll_params_sysclk_196608khz,
+#else
+	.abe = &abe_dpll_params_32k_196608khz,
+#endif
+	.usb = usb_dpll_params_1920mhz,
+	.ddr = NULL
+};
+
+struct pmic_data twl6030_4430es1 = {
+	.base_offset = PHOENIX_SMPS_BASE_VOLT_STD_MODE_UV,
+	.step = 12660, /* 10 mV represented in uV */
+	/* The code starts at 1 not 0 */
+	.start_code = 1,
+};
+
+struct pmic_data twl6030 = {
+	.base_offset = PHOENIX_SMPS_BASE_VOLT_STD_MODE_WITH_OFFSET_UV,
+	.step = 12660, /* 10 mV represented in uV */
+	/* The code starts at 1 not 0 */
+	.start_code = 1,
+};
+
+struct pmic_data tps62361 = {
+	.base_offset = TPS62361_BASE_VOLT_MV,
+	.step = 10000, /* 10 mV represented in uV */
+	.start_code = 0,
+	.gpio = TPS62361_VSEL0_GPIO,
+	.gpio_en = 1
+};
+
+struct vcores_data omap4430_volts_es1 = {
+	.mpu.value = 1325,
+	.mpu.addr = SMPS_REG_ADDR_VCORE1,
+	.mpu.pmic = &twl6030_4430es1,
+
+	.core.value = 1200,
+	.core.addr = SMPS_REG_ADDR_VCORE3,
+	.core.pmic = &twl6030_4430es1,
+
+	.mm.value = 1200,
+	.mm.addr = SMPS_REG_ADDR_VCORE2,
+	.mm.pmic = &twl6030_4430es1,
+};
+
+struct vcores_data omap4430_volts = {
+	.mpu.value = 1325,
+	.mpu.addr = SMPS_REG_ADDR_VCORE1,
+	.mpu.pmic = &twl6030,
+
+	.core.value = 1200,
+	.core.addr = SMPS_REG_ADDR_VCORE3,
+	.core.pmic = &twl6030,
+
+	.mm.value = 1200,
+	.mm.addr = SMPS_REG_ADDR_VCORE2,
+	.mm.pmic = &twl6030,
+};
+
+struct vcores_data omap4460_volts = {
+	.mpu.value = 1203,
+	.mpu.addr = TPS62361_REG_ADDR_SET1,
+	.mpu.pmic = &tps62361,
+
+	.core.value = 1200,
+	.core.addr = SMPS_REG_ADDR_VCORE1,
+	.core.pmic = &tps62361,
+
+	.mm.value = 1200,
+	.mm.addr = SMPS_REG_ADDR_VCORE2,
+	.mm.pmic = &tps62361,
+};
+
+/*
+ * Enable essential clock domains, modules and
+ * do some additional special settings needed
+ */
+void enable_basic_clocks(void)
+{
+	u32 const clk_domains_essential[] = {
+		(*prcm)->cm_l4per_clkstctrl,
+		(*prcm)->cm_l3init_clkstctrl,
+		(*prcm)->cm_memif_clkstctrl,
+		(*prcm)->cm_l4cfg_clkstctrl,
+		0
+	};
+
+	u32 const clk_modules_hw_auto_essential[] = {
+		(*prcm)->cm_l3_gpmc_clkctrl,
+		(*prcm)->cm_memif_emif_1_clkctrl,
+		(*prcm)->cm_memif_emif_2_clkctrl,
+		(*prcm)->cm_l4cfg_l4_cfg_clkctrl,
+		(*prcm)->cm_wkup_gpio1_clkctrl,
+		(*prcm)->cm_l4per_gpio2_clkctrl,
+		(*prcm)->cm_l4per_gpio3_clkctrl,
+		(*prcm)->cm_l4per_gpio4_clkctrl,
+		(*prcm)->cm_l4per_gpio5_clkctrl,
+		(*prcm)->cm_l4per_gpio6_clkctrl,
+		0
+	};
+
+	u32 const clk_modules_explicit_en_essential[] = {
+		(*prcm)->cm_wkup_gptimer1_clkctrl,
+		(*prcm)->cm_l3init_hsmmc1_clkctrl,
+		(*prcm)->cm_l3init_hsmmc2_clkctrl,
+		(*prcm)->cm_l4per_gptimer2_clkctrl,
+		(*prcm)->cm_wkup_wdtimer2_clkctrl,
+		(*prcm)->cm_l4per_uart3_clkctrl,
+		0
+	};
+
+	/* Enable optional additional functional clock for GPIO4 */
+	setbits_le32((*prcm)->cm_l4per_gpio4_clkctrl,
+			GPIO4_CLKCTRL_OPTFCLKEN_MASK);
+
+	/* Enable 96 MHz clock for MMC1 & MMC2 */
+	setbits_le32((*prcm)->cm_l3init_hsmmc1_clkctrl,
+			HSMMC_CLKCTRL_CLKSEL_MASK);
+	setbits_le32((*prcm)->cm_l3init_hsmmc2_clkctrl,
+			HSMMC_CLKCTRL_CLKSEL_MASK);
+
+	/* Select 32KHz clock as the source of GPTIMER1 */
+	setbits_le32((*prcm)->cm_wkup_gptimer1_clkctrl,
+			GPTIMER1_CLKCTRL_CLKSEL_MASK);
+
+	/* Enable optional 48M functional clock for USB  PHY */
+	setbits_le32((*prcm)->cm_l3init_usbphy_clkctrl,
+			USBPHY_CLKCTRL_OPTFCLKEN_PHY_48M_MASK);
+
+	do_enable_clocks(clk_domains_essential,
+			 clk_modules_hw_auto_essential,
+			 clk_modules_explicit_en_essential,
+			 1);
+}
+
+void enable_basic_uboot_clocks(void)
+{
+	u32 const clk_domains_essential[] = {
+		0
+	};
+
+	u32 const clk_modules_hw_auto_essential[] = {
+		(*prcm)->cm_l3init_hsusbotg_clkctrl,
+		(*prcm)->cm_l3init_usbphy_clkctrl,
+		(*prcm)->cm_l3init_usbphy_clkctrl,
+		(*prcm)->cm_clksel_usb_60mhz,
+		(*prcm)->cm_l3init_hsusbtll_clkctrl,
+		0
+	};
+
+	u32 const clk_modules_explicit_en_essential[] = {
+		(*prcm)->cm_l4per_mcspi1_clkctrl,
+		(*prcm)->cm_l4per_i2c1_clkctrl,
+		(*prcm)->cm_l4per_i2c2_clkctrl,
+		(*prcm)->cm_l4per_i2c3_clkctrl,
+		(*prcm)->cm_l4per_i2c4_clkctrl,
+		(*prcm)->cm_l3init_hsusbhost_clkctrl,
+		0
+	};
+
+	do_enable_clocks(clk_domains_essential,
+			 clk_modules_hw_auto_essential,
+			 clk_modules_explicit_en_essential,
+			 1);
+}
+
+/*
+ * Enable non-essential clock domains, modules and
+ * do some additional special settings needed
+ */
+void enable_non_essential_clocks(void)
+{
+	u32 const clk_domains_non_essential[] = {
+		(*prcm)->cm_mpu_m3_clkstctrl,
+		(*prcm)->cm_ivahd_clkstctrl,
+		(*prcm)->cm_dsp_clkstctrl,
+		(*prcm)->cm_dss_clkstctrl,
+		(*prcm)->cm_sgx_clkstctrl,
+		(*prcm)->cm1_abe_clkstctrl,
+		(*prcm)->cm_c2c_clkstctrl,
+		(*prcm)->cm_cam_clkstctrl,
+		(*prcm)->cm_dss_clkstctrl,
+		(*prcm)->cm_sdma_clkstctrl,
+		0
+	};
+
+	u32 const clk_modules_hw_auto_non_essential[] = {
+		(*prcm)->cm_l3instr_l3_3_clkctrl,
+		(*prcm)->cm_l3instr_l3_instr_clkctrl,
+		(*prcm)->cm_l3instr_intrconn_wp1_clkctrl,
+		(*prcm)->cm_l3init_hsi_clkctrl,
+		0
+	};
+
+	u32 const clk_modules_explicit_en_non_essential[] = {
+		(*prcm)->cm1_abe_aess_clkctrl,
+		(*prcm)->cm1_abe_pdm_clkctrl,
+		(*prcm)->cm1_abe_dmic_clkctrl,
+		(*prcm)->cm1_abe_mcasp_clkctrl,
+		(*prcm)->cm1_abe_mcbsp1_clkctrl,
+		(*prcm)->cm1_abe_mcbsp2_clkctrl,
+		(*prcm)->cm1_abe_mcbsp3_clkctrl,
+		(*prcm)->cm1_abe_slimbus_clkctrl,
+		(*prcm)->cm1_abe_timer5_clkctrl,
+		(*prcm)->cm1_abe_timer6_clkctrl,
+		(*prcm)->cm1_abe_timer7_clkctrl,
+		(*prcm)->cm1_abe_timer8_clkctrl,
+		(*prcm)->cm1_abe_wdt3_clkctrl,
+		(*prcm)->cm_l4per_gptimer9_clkctrl,
+		(*prcm)->cm_l4per_gptimer10_clkctrl,
+		(*prcm)->cm_l4per_gptimer11_clkctrl,
+		(*prcm)->cm_l4per_gptimer3_clkctrl,
+		(*prcm)->cm_l4per_gptimer4_clkctrl,
+		(*prcm)->cm_l4per_hdq1w_clkctrl,
+		(*prcm)->cm_l4per_mcbsp4_clkctrl,
+		(*prcm)->cm_l4per_mcspi2_clkctrl,
+		(*prcm)->cm_l4per_mcspi3_clkctrl,
+		(*prcm)->cm_l4per_mcspi4_clkctrl,
+		(*prcm)->cm_l4per_mmcsd3_clkctrl,
+		(*prcm)->cm_l4per_mmcsd4_clkctrl,
+		(*prcm)->cm_l4per_mmcsd5_clkctrl,
+		(*prcm)->cm_l4per_uart1_clkctrl,
+		(*prcm)->cm_l4per_uart2_clkctrl,
+		(*prcm)->cm_l4per_uart4_clkctrl,
+		(*prcm)->cm_wkup_keyboard_clkctrl,
+		(*prcm)->cm_wkup_wdtimer2_clkctrl,
+		(*prcm)->cm_cam_iss_clkctrl,
+		(*prcm)->cm_cam_fdif_clkctrl,
+		(*prcm)->cm_dss_dss_clkctrl,
+		(*prcm)->cm_sgx_sgx_clkctrl,
+		0
+	};
+
+	/* Enable optional functional clock for ISS */
+	setbits_le32((*prcm)->cm_cam_iss_clkctrl, ISS_CLKCTRL_OPTFCLKEN_MASK);
+
+	/* Enable all optional functional clocks of DSS */
+	setbits_le32((*prcm)->cm_dss_dss_clkctrl, DSS_CLKCTRL_OPTFCLKEN_MASK);
+
+	do_enable_clocks(clk_domains_non_essential,
+			 clk_modules_hw_auto_non_essential,
+			 clk_modules_explicit_en_non_essential,
+			 0);
+
+	/* Put camera module in no sleep mode */
+	clrsetbits_le32((*prcm)->cm_cam_clkstctrl,
+			MODULE_CLKCTRL_MODULEMODE_MASK,
+			CD_CLKCTRL_CLKTRCTRL_NO_SLEEP <<
+			MODULE_CLKCTRL_MODULEMODE_SHIFT);
+}
+
+void hw_data_init(void)
+{
+	u32 omap_rev = omap_revision();
+
+	(*prcm) = &omap4_prcm;
+
+	switch (omap_rev) {
+
+	case OMAP4430_ES1_0:
+	*dplls_data = &omap4430_dplls_es1;
+	*omap_vcores = &omap4430_volts_es1;
+	break;
+
+	case OMAP4430_ES2_0:
+	case OMAP4430_ES2_1:
+	case OMAP4430_ES2_2:
+	case OMAP4430_ES2_3:
+	*dplls_data = &omap4430_dplls;
+	*omap_vcores = &omap4430_volts;
+	break;
+
+	case OMAP4460_ES1_0:
+	case OMAP4460_ES1_1:
+	*dplls_data = &omap4460_dplls;
+	*omap_vcores = &omap4460_volts;
+	break;
+
+	default:
+		printf("\n INVALID OMAP REVISION ");
+	}
+
+	*ctrl = &omap4_ctrl;
+}
diff --git a/arch/arm/cpu/armv7/omap4/hwinit.c b/arch/arm/cpu/armv7/omap4/hwinit.c
index f4123aa..2db517b 100644
--- a/arch/arm/cpu/armv7/omap4/hwinit.c
+++ b/arch/arm/cpu/armv7/omap4/hwinit.c
@@ -57,10 +57,6 @@
 void do_io_settings(void)
 {
 	u32 lpddr2io;
-	struct control_lpddr2io_regs *lpddr2io_regs =
-		(struct control_lpddr2io_regs *)LPDDR2_IO_REGS_BASE;
-	struct omap_sys_ctrl_regs *const ctrl =
-		(struct omap_sys_ctrl_regs *)SYSCTRL_GENERAL_CORE_BASE;
 
 	u32 omap4_rev = omap_revision();
 
@@ -72,20 +68,20 @@
 		lpddr2io = CONTROL_LPDDR2IO_SLEW_315PS_DRV12_PULL_DOWN;
 
 	/* EMIF1 */
-	writel(lpddr2io, &lpddr2io_regs->control_lpddr2io1_0);
-	writel(lpddr2io, &lpddr2io_regs->control_lpddr2io1_1);
+	writel(lpddr2io, (*ctrl)->control_lpddr2io1_0);
+	writel(lpddr2io, (*ctrl)->control_lpddr2io1_1);
 	/* No pull for GR10 as per hw team's recommendation */
 	writel(lpddr2io & ~LPDDR2IO_GR10_WD_MASK,
-		&lpddr2io_regs->control_lpddr2io1_2);
-	writel(CONTROL_LPDDR2IO_3_VAL, &lpddr2io_regs->control_lpddr2io1_3);
+		(*ctrl)->control_lpddr2io1_2);
+	writel(CONTROL_LPDDR2IO_3_VAL, (*ctrl)->control_lpddr2io1_3);
 
 	/* EMIF2 */
-	writel(lpddr2io, &lpddr2io_regs->control_lpddr2io2_0);
-	writel(lpddr2io, &lpddr2io_regs->control_lpddr2io2_1);
+	writel(lpddr2io, (*ctrl)->control_lpddr2io2_0);
+	writel(lpddr2io, (*ctrl)->control_lpddr2io2_1);
 	/* No pull for GR10 as per hw team's recommendation */
 	writel(lpddr2io & ~LPDDR2IO_GR10_WD_MASK,
-		&lpddr2io_regs->control_lpddr2io2_2);
-	writel(CONTROL_LPDDR2IO_3_VAL, &lpddr2io_regs->control_lpddr2io2_3);
+		(*ctrl)->control_lpddr2io2_2);
+	writel(CONTROL_LPDDR2IO_3_VAL, (*ctrl)->control_lpddr2io2_3);
 
 	/*
 	 * Some of these settings (TRIM values) come from eFuse and are
@@ -93,16 +89,16 @@
 	 * calibration of the device. Do the software over-ride only if
 	 * the device is not correctly trimmed
 	 */
-	if (!(readl(&ctrl->control_std_fuse_opp_bgap) & 0xFFFF)) {
+	if (!(readl((*ctrl)->control_std_fuse_opp_bgap) & 0xFFFF)) {
 
 		writel(LDOSRAM_VOLT_CTRL_OVERRIDE,
-			&ctrl->control_ldosram_iva_voltage_ctrl);
+			(*ctrl)->control_ldosram_iva_voltage_ctrl);
 
 		writel(LDOSRAM_VOLT_CTRL_OVERRIDE,
-			&ctrl->control_ldosram_mpu_voltage_ctrl);
+			(*ctrl)->control_ldosram_mpu_voltage_ctrl);
 
 		writel(LDOSRAM_VOLT_CTRL_OVERRIDE,
-			&ctrl->control_ldosram_core_voltage_ctrl);
+			(*ctrl)->control_ldosram_core_voltage_ctrl);
 	}
 
 	/*
@@ -110,11 +106,11 @@
 	 *	i. unconditionally for all 4430
 	 *	ii. only if un-trimmed for 4460
 	 */
-	if (!readl(&ctrl->control_efuse_1))
-		writel(CONTROL_EFUSE_1_OVERRIDE, &ctrl->control_efuse_1);
+	if (!readl((*ctrl)->control_efuse_1))
+		writel(CONTROL_EFUSE_1_OVERRIDE, (*ctrl)->control_efuse_1);
 
-	if ((omap4_rev < OMAP4460_ES1_0) || !readl(&ctrl->control_efuse_2))
-		writel(CONTROL_EFUSE_2_OVERRIDE, &ctrl->control_efuse_2);
+	if ((omap4_rev < OMAP4460_ES1_0) || !readl((*ctrl)->control_efuse_2))
+		writel(CONTROL_EFUSE_2_OVERRIDE, (*ctrl)->control_efuse_2);
 }
 #endif /* CONFIG_SPL_BUILD */
 
diff --git a/arch/arm/cpu/armv7/omap4/prcm-regs.c b/arch/arm/cpu/armv7/omap4/prcm-regs.c
new file mode 100644
index 0000000..7225a30
--- /dev/null
+++ b/arch/arm/cpu/armv7/omap4/prcm-regs.c
@@ -0,0 +1,315 @@
+/*
+ *
+ * HW regs data for OMAP4
+ *
+ * (C) Copyright 2013
+ * Texas Instruments, <www.ti.com>
+ *
+ * Sricharan R <r.sricharan@ti.com>
+ *
+ * See file CREDITS for list of people who contributed to this
+ * project.
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of
+ * the License, or (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
+ * MA 02111-1307 USA
+ */
+
+#include <asm/omap_common.h>
+
+struct prcm_regs const omap4_prcm = {
+	/* cm1.ckgen */
+	.cm_clksel_core  = 0x4a004100,
+	.cm_clksel_abe = 0x4a004108,
+	.cm_dll_ctrl = 0x4a004110,
+	.cm_clkmode_dpll_core = 0x4a004120,
+	.cm_idlest_dpll_core = 0x4a004124,
+	.cm_autoidle_dpll_core = 0x4a004128,
+	.cm_clksel_dpll_core = 0x4a00412c,
+	.cm_div_m2_dpll_core = 0x4a004130,
+	.cm_div_m3_dpll_core = 0x4a004134,
+	.cm_div_m4_dpll_core = 0x4a004138,
+	.cm_div_m5_dpll_core = 0x4a00413c,
+	.cm_div_m6_dpll_core = 0x4a004140,
+	.cm_div_m7_dpll_core = 0x4a004144,
+	.cm_ssc_deltamstep_dpll_core = 0x4a004148,
+	.cm_ssc_modfreqdiv_dpll_core = 0x4a00414c,
+	.cm_emu_override_dpll_core = 0x4a004150,
+	.cm_clkmode_dpll_mpu = 0x4a004160,
+	.cm_idlest_dpll_mpu = 0x4a004164,
+	.cm_autoidle_dpll_mpu = 0x4a004168,
+	.cm_clksel_dpll_mpu = 0x4a00416c,
+	.cm_div_m2_dpll_mpu = 0x4a004170,
+	.cm_ssc_deltamstep_dpll_mpu = 0x4a004188,
+	.cm_ssc_modfreqdiv_dpll_mpu = 0x4a00418c,
+	.cm_bypclk_dpll_mpu = 0x4a00419c,
+	.cm_clkmode_dpll_iva = 0x4a0041a0,
+	.cm_idlest_dpll_iva = 0x4a0041a4,
+	.cm_autoidle_dpll_iva = 0x4a0041a8,
+	.cm_clksel_dpll_iva = 0x4a0041ac,
+	.cm_div_m4_dpll_iva = 0x4a0041b8,
+	.cm_div_m5_dpll_iva = 0x4a0041bc,
+	.cm_ssc_deltamstep_dpll_iva = 0x4a0041c8,
+	.cm_ssc_modfreqdiv_dpll_iva = 0x4a0041cc,
+	.cm_bypclk_dpll_iva = 0x4a0041dc,
+	.cm_clkmode_dpll_abe = 0x4a0041e0,
+	.cm_idlest_dpll_abe = 0x4a0041e4,
+	.cm_autoidle_dpll_abe = 0x4a0041e8,
+	.cm_clksel_dpll_abe = 0x4a0041ec,
+	.cm_div_m2_dpll_abe = 0x4a0041f0,
+	.cm_div_m3_dpll_abe = 0x4a0041f4,
+	.cm_ssc_deltamstep_dpll_abe = 0x4a004208,
+	.cm_ssc_modfreqdiv_dpll_abe = 0x4a00420c,
+	.cm_clkmode_dpll_ddrphy = 0x4a004220,
+	.cm_idlest_dpll_ddrphy = 0x4a004224,
+	.cm_autoidle_dpll_ddrphy = 0x4a004228,
+	.cm_clksel_dpll_ddrphy = 0x4a00422c,
+	.cm_div_m2_dpll_ddrphy = 0x4a004230,
+	.cm_div_m4_dpll_ddrphy = 0x4a004238,
+	.cm_div_m5_dpll_ddrphy = 0x4a00423c,
+	.cm_div_m6_dpll_ddrphy = 0x4a004240,
+	.cm_ssc_deltamstep_dpll_ddrphy = 0x4a004248,
+	.cm_shadow_freq_config1 = 0x4a004260,
+	.cm_mpu_mpu_clkctrl = 0x4a004320,
+
+	/* cm1.dsp */
+	.cm_dsp_clkstctrl = 0x4a004400,
+	.cm_dsp_dsp_clkctrl = 0x4a004420,
+
+	/* cm1.abe */
+	.cm1_abe_clkstctrl = 0x4a004500,
+	.cm1_abe_l4abe_clkctrl = 0x4a004520,
+	.cm1_abe_aess_clkctrl = 0x4a004528,
+	.cm1_abe_pdm_clkctrl = 0x4a004530,
+	.cm1_abe_dmic_clkctrl = 0x4a004538,
+	.cm1_abe_mcasp_clkctrl = 0x4a004540,
+	.cm1_abe_mcbsp1_clkctrl = 0x4a004548,
+	.cm1_abe_mcbsp2_clkctrl = 0x4a004550,
+	.cm1_abe_mcbsp3_clkctrl = 0x4a004558,
+	.cm1_abe_slimbus_clkctrl = 0x4a004560,
+	.cm1_abe_timer5_clkctrl = 0x4a004568,
+	.cm1_abe_timer6_clkctrl = 0x4a004570,
+	.cm1_abe_timer7_clkctrl = 0x4a004578,
+	.cm1_abe_timer8_clkctrl = 0x4a004580,
+	.cm1_abe_wdt3_clkctrl = 0x4a004588,
+
+	/* cm2.ckgen */
+	.cm_clksel_mpu_m3_iss_root = 0x4a008100,
+	.cm_clksel_usb_60mhz = 0x4a008104,
+	.cm_scale_fclk = 0x4a008108,
+	.cm_core_dvfs_perf1 = 0x4a008110,
+	.cm_core_dvfs_perf2 = 0x4a008114,
+	.cm_core_dvfs_perf3 = 0x4a008118,
+	.cm_core_dvfs_perf4 = 0x4a00811c,
+	.cm_core_dvfs_current = 0x4a008124,
+	.cm_iva_dvfs_perf_tesla = 0x4a008128,
+	.cm_iva_dvfs_perf_ivahd = 0x4a00812c,
+	.cm_iva_dvfs_perf_abe = 0x4a008130,
+	.cm_iva_dvfs_current = 0x4a008138,
+	.cm_clkmode_dpll_per = 0x4a008140,
+	.cm_idlest_dpll_per = 0x4a008144,
+	.cm_autoidle_dpll_per = 0x4a008148,
+	.cm_clksel_dpll_per = 0x4a00814c,
+	.cm_div_m2_dpll_per = 0x4a008150,
+	.cm_div_m3_dpll_per = 0x4a008154,
+	.cm_div_m4_dpll_per = 0x4a008158,
+	.cm_div_m5_dpll_per = 0x4a00815c,
+	.cm_div_m6_dpll_per = 0x4a008160,
+	.cm_div_m7_dpll_per = 0x4a008164,
+	.cm_ssc_deltamstep_dpll_per = 0x4a008168,
+	.cm_ssc_modfreqdiv_dpll_per = 0x4a00816c,
+	.cm_emu_override_dpll_per = 0x4a008170,
+	.cm_clkmode_dpll_usb = 0x4a008180,
+	.cm_idlest_dpll_usb = 0x4a008184,
+	.cm_autoidle_dpll_usb = 0x4a008188,
+	.cm_clksel_dpll_usb = 0x4a00818c,
+	.cm_div_m2_dpll_usb = 0x4a008190,
+	.cm_ssc_deltamstep_dpll_usb = 0x4a0081a8,
+	.cm_ssc_modfreqdiv_dpll_usb = 0x4a0081ac,
+	.cm_clkdcoldo_dpll_usb = 0x4a0081b4,
+	.cm_clkmode_dpll_unipro = 0x4a0081c0,
+	.cm_idlest_dpll_unipro = 0x4a0081c4,
+	.cm_autoidle_dpll_unipro = 0x4a0081c8,
+	.cm_clksel_dpll_unipro = 0x4a0081cc,
+	.cm_div_m2_dpll_unipro = 0x4a0081d0,
+	.cm_ssc_deltamstep_dpll_unipro = 0x4a0081e8,
+	.cm_ssc_modfreqdiv_dpll_unipro = 0x4a0081ec,
+
+	/* cm2.core */
+	.cm_l3_1_clkstctrl = 0x4a008700,
+	.cm_l3_1_dynamicdep = 0x4a008708,
+	.cm_l3_1_l3_1_clkctrl = 0x4a008720,
+	.cm_l3_2_clkstctrl = 0x4a008800,
+	.cm_l3_2_dynamicdep = 0x4a008808,
+	.cm_l3_2_l3_2_clkctrl = 0x4a008820,
+	.cm_l3_gpmc_clkctrl = 0x4a008828,
+	.cm_l3_2_ocmc_ram_clkctrl = 0x4a008830,
+	.cm_mpu_m3_clkstctrl = 0x4a008900,
+	.cm_mpu_m3_staticdep = 0x4a008904,
+	.cm_mpu_m3_dynamicdep = 0x4a008908,
+	.cm_mpu_m3_mpu_m3_clkctrl = 0x4a008920,
+	.cm_sdma_clkstctrl = 0x4a008a00,
+	.cm_sdma_staticdep = 0x4a008a04,
+	.cm_sdma_dynamicdep = 0x4a008a08,
+	.cm_sdma_sdma_clkctrl = 0x4a008a20,
+	.cm_memif_clkstctrl = 0x4a008b00,
+	.cm_memif_dmm_clkctrl = 0x4a008b20,
+	.cm_memif_emif_fw_clkctrl = 0x4a008b28,
+	.cm_memif_emif_1_clkctrl = 0x4a008b30,
+	.cm_memif_emif_2_clkctrl = 0x4a008b38,
+	.cm_memif_dll_clkctrl = 0x4a008b40,
+	.cm_memif_emif_h1_clkctrl = 0x4a008b50,
+	.cm_memif_emif_h2_clkctrl = 0x4a008b58,
+	.cm_memif_dll_h_clkctrl = 0x4a008b60,
+	.cm_c2c_clkstctrl = 0x4a008c00,
+	.cm_c2c_staticdep = 0x4a008c04,
+	.cm_c2c_dynamicdep = 0x4a008c08,
+	.cm_c2c_sad2d_clkctrl = 0x4a008c20,
+	.cm_c2c_modem_icr_clkctrl = 0x4a008c28,
+	.cm_c2c_sad2d_fw_clkctrl = 0x4a008c30,
+	.cm_l4cfg_clkstctrl = 0x4a008d00,
+	.cm_l4cfg_dynamicdep = 0x4a008d08,
+	.cm_l4cfg_l4_cfg_clkctrl = 0x4a008d20,
+	.cm_l4cfg_hw_sem_clkctrl = 0x4a008d28,
+	.cm_l4cfg_mailbox_clkctrl = 0x4a008d30,
+	.cm_l4cfg_sar_rom_clkctrl = 0x4a008d38,
+	.cm_l3instr_clkstctrl = 0x4a008e00,
+	.cm_l3instr_l3_3_clkctrl = 0x4a008e20,
+	.cm_l3instr_l3_instr_clkctrl = 0x4a008e28,
+	.cm_l3instr_intrconn_wp1_clkct = 0x4a008e40,
+	.cm_ivahd_clkstctrl = 0x4a008f00,
+
+	/* cm2.ivahd */
+	.cm_ivahd_ivahd_clkctrl = 0x4a008f20,
+	.cm_ivahd_sl2_clkctrl = 0x4a008f28,
+
+	/* cm2.cam */
+	.cm_cam_clkstctrl = 0x4a009000,
+	.cm_cam_iss_clkctrl = 0x4a009020,
+	.cm_cam_fdif_clkctrl = 0x4a009028,
+
+	/* cm2.dss */
+	.cm_dss_clkstctrl = 0x4a009100,
+	.cm_dss_dss_clkctrl = 0x4a009120,
+
+	/* cm2.sgx */
+	.cm_sgx_clkstctrl = 0x4a009200,
+	.cm_sgx_sgx_clkctrl = 0x4a009220,
+
+	/* cm2.l3init */
+	.cm_l3init_clkstctrl = 0x4a009300,
+	.cm_l3init_hsmmc1_clkctrl = 0x4a009328,
+	.cm_l3init_hsmmc2_clkctrl = 0x4a009330,
+	.cm_l3init_hsi_clkctrl = 0x4a009338,
+	.cm_l3init_hsusbhost_clkctrl = 0x4a009358,
+	.cm_l3init_hsusbotg_clkctrl = 0x4a009360,
+	.cm_l3init_hsusbtll_clkctrl = 0x4a009368,
+	.cm_l3init_p1500_clkctrl = 0x4a009378,
+	.cm_l3init_fsusb_clkctrl = 0x4a0093d0,
+	.cm_l3init_usbphy_clkctrl = 0x4a0093e0,
+
+	/* cm2.l4per */
+	.cm_l4per_clkstctrl = 0x4a009400,
+	.cm_l4per_dynamicdep = 0x4a009408,
+	.cm_l4per_adc_clkctrl = 0x4a009420,
+	.cm_l4per_gptimer10_clkctrl = 0x4a009428,
+	.cm_l4per_gptimer11_clkctrl = 0x4a009430,
+	.cm_l4per_gptimer2_clkctrl = 0x4a009438,
+	.cm_l4per_gptimer3_clkctrl = 0x4a009440,
+	.cm_l4per_gptimer4_clkctrl = 0x4a009448,
+	.cm_l4per_gptimer9_clkctrl = 0x4a009450,
+	.cm_l4per_elm_clkctrl = 0x4a009458,
+	.cm_l4per_gpio2_clkctrl = 0x4a009460,
+	.cm_l4per_gpio3_clkctrl = 0x4a009468,
+	.cm_l4per_gpio4_clkctrl = 0x4a009470,
+	.cm_l4per_gpio5_clkctrl = 0x4a009478,
+	.cm_l4per_gpio6_clkctrl = 0x4a009480,
+	.cm_l4per_hdq1w_clkctrl = 0x4a009488,
+	.cm_l4per_hecc1_clkctrl = 0x4a009490,
+	.cm_l4per_hecc2_clkctrl = 0x4a009498,
+	.cm_l4per_i2c1_clkctrl = 0x4a0094a0,
+	.cm_l4per_i2c2_clkctrl = 0x4a0094a8,
+	.cm_l4per_i2c3_clkctrl = 0x4a0094b0,
+	.cm_l4per_i2c4_clkctrl = 0x4a0094b8,
+	.cm_l4per_l4per_clkctrl = 0x4a0094c0,
+	.cm_l4per_mcasp2_clkctrl = 0x4a0094d0,
+	.cm_l4per_mcasp3_clkctrl = 0x4a0094d8,
+	.cm_l4per_mcbsp4_clkctrl = 0x4a0094e0,
+	.cm_l4per_mgate_clkctrl = 0x4a0094e8,
+	.cm_l4per_mcspi1_clkctrl = 0x4a0094f0,
+	.cm_l4per_mcspi2_clkctrl = 0x4a0094f8,
+	.cm_l4per_mcspi3_clkctrl = 0x4a009500,
+	.cm_l4per_mcspi4_clkctrl = 0x4a009508,
+	.cm_l4per_mmcsd3_clkctrl = 0x4a009520,
+	.cm_l4per_mmcsd4_clkctrl = 0x4a009528,
+	.cm_l4per_msprohg_clkctrl = 0x4a009530,
+	.cm_l4per_slimbus2_clkctrl = 0x4a009538,
+	.cm_l4per_uart1_clkctrl = 0x4a009540,
+	.cm_l4per_uart2_clkctrl = 0x4a009548,
+	.cm_l4per_uart3_clkctrl = 0x4a009550,
+	.cm_l4per_uart4_clkctrl = 0x4a009558,
+	.cm_l4per_mmcsd5_clkctrl = 0x4a009560,
+	.cm_l4per_i2c5_clkctrl = 0x4a009568,
+	.cm_l4sec_clkstctrl = 0x4a009580,
+	.cm_l4sec_staticdep = 0x4a009584,
+	.cm_l4sec_dynamicdep = 0x4a009588,
+	.cm_l4sec_aes1_clkctrl = 0x4a0095a0,
+	.cm_l4sec_aes2_clkctrl = 0x4a0095a8,
+	.cm_l4sec_des3des_clkctrl = 0x4a0095b0,
+	.cm_l4sec_pkaeip29_clkctrl = 0x4a0095b8,
+	.cm_l4sec_rng_clkctrl = 0x4a0095c0,
+	.cm_l4sec_sha2md51_clkctrl = 0x4a0095c8,
+	.cm_l4sec_cryptodma_clkctrl = 0x4a0095d8,
+
+	/* l4 wkup regs */
+	.cm_abe_pll_ref_clksel = 0x4a30610c,
+	.cm_sys_clksel = 0x4a306110,
+	.cm_wkup_clkstctrl = 0x4a307800,
+	.cm_wkup_l4wkup_clkctrl = 0x4a307820,
+	.cm_wkup_wdtimer1_clkctrl = 0x4a307828,
+	.cm_wkup_wdtimer2_clkctrl = 0x4a307830,
+	.cm_wkup_gpio1_clkctrl = 0x4a307838,
+	.cm_wkup_gptimer1_clkctrl = 0x4a307840,
+	.cm_wkup_gptimer12_clkctrl = 0x4a307848,
+	.cm_wkup_synctimer_clkctrl = 0x4a307850,
+	.cm_wkup_usim_clkctrl = 0x4a307858,
+	.cm_wkup_sarram_clkctrl = 0x4a307860,
+	.cm_wkup_keyboard_clkctrl = 0x4a307878,
+	.cm_wkup_rtc_clkctrl = 0x4a307880,
+	.cm_wkup_bandgap_clkctrl = 0x4a307888,
+	.prm_vc_val_bypass = 0x4a307ba0,
+	.prm_vc_cfg_channel = 0x4a307ba4,
+	.prm_vc_cfg_i2c_mode = 0x4a307ba8,
+	.prm_vc_cfg_i2c_clk = 0x4a307bac,
+};
+
+struct omap_sys_ctrl_regs const omap4_ctrl = {
+	.control_id_code			= 0x4A002204,
+	.control_std_fuse_opp_bgap		= 0x4a002260,
+	.control_status				= 0x4a0022c4,
+	.control_ldosram_iva_voltage_ctrl	= 0x4A002320,
+	.control_ldosram_mpu_voltage_ctrl	= 0x4A002324,
+	.control_ldosram_core_voltage_ctrl	= 0x4A002328,
+	.control_pbiaslite			= 0x4A100600,
+	.control_lpddr2io1_0			= 0x4A100638,
+	.control_lpddr2io1_1			= 0x4A10063C,
+	.control_lpddr2io1_2			= 0x4A100640,
+	.control_lpddr2io1_3			= 0x4A100644,
+	.control_lpddr2io2_0			= 0x4A100648,
+	.control_lpddr2io2_1			= 0x4A10064C,
+	.control_lpddr2io2_2			= 0x4A100650,
+	.control_lpddr2io2_3			= 0x4A100654,
+	.control_efuse_1			= 0x4A100700,
+	.control_efuse_2			= 0x4A100704,
+};
diff --git a/arch/arm/cpu/armv7/omap4/sdram_elpida.c b/arch/arm/cpu/armv7/omap4/sdram_elpida.c
index b9128fa..20fc552 100644
--- a/arch/arm/cpu/armv7/omap4/sdram_elpida.c
+++ b/arch/arm/cpu/armv7/omap4/sdram_elpida.c
@@ -90,23 +90,30 @@
 	.emif_ddr_phy_ctlr_1		= 0x049ff418
 };
 
-/* Dummy registers for OMAP44xx */
-const u32 ddr3_ext_phy_ctrl_const_base[EMIF_EXT_PHY_CTRL_CONST_REG];
-
 const struct dmm_lisa_map_regs lisa_map_2G_x_1_x_2 = {
 	.dmm_lisa_map_0 = 0xFF020100,
 	.dmm_lisa_map_1 = 0,
 	.dmm_lisa_map_2 = 0,
-	.dmm_lisa_map_3 = 0x80540300
+	.dmm_lisa_map_3 = 0x80540300,
+	.is_ma_present	= 0x0
 };
 
 const struct dmm_lisa_map_regs lisa_map_2G_x_2_x_2 = {
 	.dmm_lisa_map_0 = 0xFF020100,
 	.dmm_lisa_map_1 = 0,
 	.dmm_lisa_map_2 = 0,
-	.dmm_lisa_map_3 = 0x80640300
+	.dmm_lisa_map_3 = 0x80640300,
+	.is_ma_present	= 0x0
 };
 
+const struct dmm_lisa_map_regs ma_lisa_map_2G_x_2_x_2 = {
+	.dmm_lisa_map_0 = 0xFF020100,
+	.dmm_lisa_map_1 = 0,
+	.dmm_lisa_map_2 = 0,
+	.dmm_lisa_map_3 = 0x80640300,
+	.is_ma_present	= 0x1
+};
+
 static void emif_get_reg_dump_sdp(u32 emif_nr, const struct emif_regs **regs)
 {
 	u32 omap4_rev = omap_revision();
@@ -129,8 +136,10 @@
 
 	if (omap_rev == OMAP4430_ES1_0)
 		*dmm_lisa_regs = &lisa_map_2G_x_1_x_2;
-	else
+	else if (omap_rev < OMAP4460_ES1_0)
 		*dmm_lisa_regs = &lisa_map_2G_x_2_x_2;
+	else
+		*dmm_lisa_regs = &ma_lisa_map_2G_x_2_x_2;
 }
 
 void emif_get_dmm_regs(const struct dmm_lisa_map_regs **dmm_lisa_regs)
@@ -284,3 +293,16 @@
 	__attribute__((weak, alias("emif_get_device_timings_sdp")));
 
 #endif /* CONFIG_SYS_DEFAULT_LPDDR2_TIMINGS */
+
+const struct lpddr2_mr_regs mr_regs = {
+	.mr1	= MR1_BL_8_BT_SEQ_WRAP_EN_NWR_3,
+	.mr2	= 0x4,
+	.mr3	= -1,
+	.mr10	= MR10_ZQ_ZQINIT,
+	.mr16	= MR16_REF_FULL_ARRAY
+};
+
+void get_lpddr2_mr_regs(const struct lpddr2_mr_regs **regs)
+{
+	*regs = &mr_regs;
+}
diff --git a/arch/arm/cpu/armv7/omap5/Makefile b/arch/arm/cpu/armv7/omap5/Makefile
index 9b261c4..ce00e2c 100644
--- a/arch/arm/cpu/armv7/omap5/Makefile
+++ b/arch/arm/cpu/armv7/omap5/Makefile
@@ -26,9 +26,10 @@
 LIB	=  $(obj)lib$(SOC).o
 
 COBJS	+= hwinit.o
-COBJS	+= clocks.o
 COBJS	+= emif.o
 COBJS	+= sdram.o
+COBJS	+= prcm-regs.o
+COBJS	+= hw_data.o
 
 SRCS	:= $(SOBJS:.o=.S) $(COBJS:.o=.c)
 OBJS	:= $(addprefix $(obj),$(COBJS) $(SOBJS))
diff --git a/arch/arm/cpu/armv7/omap5/clocks.c b/arch/arm/cpu/armv7/omap5/clocks.c
deleted file mode 100644
index eecfbad..0000000
--- a/arch/arm/cpu/armv7/omap5/clocks.c
+++ /dev/null
@@ -1,494 +0,0 @@
-/*
- *
- * Clock initialization for OMAP5
- *
- * (C) Copyright 2010
- * Texas Instruments, <www.ti.com>
- *
- * Aneesh V <aneesh@ti.com>
- * Sricharan R <r.sricharan@ti.com>
- *
- * Based on previous work by:
- *	Santosh Shilimkar <santosh.shilimkar@ti.com>
- *	Rajendra Nayak <rnayak@ti.com>
- *
- * See file CREDITS for list of people who contributed to this
- * project.
- *
- * This program is free software; you can redistribute it and/or
- * modify it under the terms of the GNU General Public License as
- * published by the Free Software Foundation; either version 2 of
- * the License, or (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
- * MA 02111-1307 USA
- */
-#include <common.h>
-#include <asm/omap_common.h>
-#include <asm/arch/clocks.h>
-#include <asm/arch/sys_proto.h>
-#include <asm/utils.h>
-#include <asm/omap_gpio.h>
-
-#ifndef CONFIG_SPL_BUILD
-/*
- * printing to console doesn't work unless
- * this code is executed from SPL
- */
-#define printf(fmt, args...)
-#define puts(s)
-#endif
-
-struct omap5_prcm_regs *const prcm = (struct omap5_prcm_regs *)0x4A004100;
-
-const u32 sys_clk_array[8] = {
-	12000000,	       /* 12 MHz */
-	0,		       /* NA */
-	16800000,	       /* 16.8 MHz */
-	19200000,	       /* 19.2 MHz */
-	26000000,	       /* 26 MHz */
-	0,		       /* NA */
-	38400000,	       /* 38.4 MHz */
-};
-
-static const struct dpll_params mpu_dpll_params_1_5ghz[NUM_SYS_CLKS] = {
-	{125, 0, 1, -1, -1, -1, -1, -1, -1, -1},	/* 12 MHz   */
-	{-1, -1, -1, -1, -1, -1, -1, -1, -1, -1},	/* 13 MHz   */
-	{625, 6, 1, -1, -1, -1, -1, -1, -1, -1},	/* 16.8 MHz */
-	{625, 7, 1, -1, -1, -1, -1, -1, -1, -1},	/* 19.2 MHz */
-	{750, 12, 1, -1, -1, -1, -1, -1, -1, -1},	/* 26 MHz   */
-	{-1, -1, -1, -1, -1, -1, -1, -1, -1, -1},	/* 27 MHz   */
-	{625, 15, 1, -1, -1, -1, -1, -1, -1, -1}	/* 38.4 MHz */
-};
-
-static const struct dpll_params mpu_dpll_params_2ghz[NUM_SYS_CLKS] = {
-	{500, 2, 1, -1, -1, -1, -1, -1, -1, -1},	/* 12 MHz   */
-	{-1, -1, -1, -1, -1, -1, -1, -1, -1, -1},	/* 13 MHz   */
-	{2024, 16, 1, -1, -1, -1, -1, -1, -1, -1},	/* 16.8 MHz */
-	{625, 5, 1, -1, -1, -1, -1, -1, -1, -1},	/* 19.2 MHz */
-	{1000, 12, 1, -1, -1, -1, -1, -1, -1, -1},	/* 26 MHz   */
-	{-1, -1, -1, -1, -1, -1, -1, -1, -1, -1},	/* 27 MHz   */
-	{625, 11, 1, -1, -1, -1, -1, -1, -1, -1}	/* 38.4 MHz */
-};
-
-static const struct dpll_params mpu_dpll_params_1100mhz[NUM_SYS_CLKS] = {
-	{275, 2, 1, -1, -1, -1, -1, -1, -1, -1},	/* 12 MHz   */
-	{-1, -1, -1, -1, -1, -1, -1, -1, -1, -1},	/* 13 MHz   */
-	{1375, 20, 1, -1, -1, -1, -1, -1, -1, -1},	/* 16.8 MHz */
-	{1375, 23, 1, -1, -1, -1, -1, -1, -1, -1},	/* 19.2 MHz */
-	{550, 12, 1, -1, -1, -1, -1, -1, -1, -1},	/* 26 MHz   */
-	{-1, -1, -1, -1, -1, -1, -1, -1, -1, -1},	/* 27 MHz   */
-	{1375, 47, 1, -1, -1, -1, -1, -1, -1, -1}	/* 38.4 MHz */
-};
-
-static const struct dpll_params mpu_dpll_params_800mhz[NUM_SYS_CLKS] = {
-	{200, 2, 1, -1, -1, -1, -1, -1, -1, -1},	/* 12 MHz   */
-	{-1, -1, -1, -1, -1, -1, -1, -1, -1, -1},	/* 13 MHz   */
-	{1000, 20, 1, -1, -1, -1, -1, -1, -1, -1},	/* 16.8 MHz */
-	{375, 8, 1, -1, -1, -1, -1, -1, -1, -1},	/* 19.2 MHz */
-	{400, 12, 1, -1, -1, -1, -1, -1, -1, -1},	/* 26 MHz   */
-	{-1, -1, -1, -1, -1, -1, -1, -1, -1, -1},	/* 27 MHz   */
-	{375, 17, 1, -1, -1, -1, -1, -1, -1, -1}		/* 38.4 MHz */
-};
-
-static const struct dpll_params mpu_dpll_params_400mhz[NUM_SYS_CLKS] = {
-	{200, 2, 2, -1, -1, -1, -1, -1, -1, -1},	/* 12 MHz   */
-	{-1, -1, -1, -1, -1, -1, -1, -1, -1, -1},	/* 13 MHz   */
-	{1000, 20, 2, -1, -1, -1, -1, -1, -1, -1},	/* 16.8 MHz */
-	{375, 8, 2, -1, -1, -1, -1, -1, -1, -1},	/* 19.2 MHz */
-	{400, 12, 2, -1, -1, -1, -1, -1, -1, -1},	/* 26 MHz   */
-	{-1, -1, -1, -1, -1, -1, -1, -1, -1, -1},	/* 27 MHz   */
-	{375, 17, 2, -1, -1, -1, -1, -1, -1, -1}		/* 38.4 MHz */
-};
-
-static const struct dpll_params mpu_dpll_params_550mhz[NUM_SYS_CLKS] = {
-	{275, 2, 2, -1, -1, -1, -1, -1, -1, -1},	/* 12 MHz   */
-	{-1, -1, -1, -1, -1, -1, -1, -1, -1, -1},	/* 13 MHz   */
-	{1375, 20, 2, -1, -1, -1, -1, -1, -1, -1},	/* 16.8 MHz */
-	{1375, 23, 2, -1, -1, -1, -1, -1, -1, -1},	/* 19.2 MHz */
-	{550, 12, 2, -1, -1, -1, -1, -1, -1, -1},	/* 26 MHz   */
-	{-1, -1, -1, -1, -1, -1, -1, -1, -1, -1},	/* 27 MHz   */
-	{1375, 47, 2, -1, -1, -1, -1, -1, -1, -1}	/* 38.4 MHz */
-};
-
-static const struct dpll_params
-			core_dpll_params_2128mhz_ddr532[NUM_SYS_CLKS] = {
-	{266, 2, 2, 5, 8, 4, 62, 5, 5, 7},		/* 12 MHz   */
-	{-1, -1, -1, -1, -1, -1, -1, -1, -1, -1},	/* 13 MHz   */
-	{570, 8, 2, 5, 8, 4, 62, 5, 5, 7},		/* 16.8 MHz */
-	{665, 11, 2, 5, 8, 4, 62, 5, 5, 7},		/* 19.2 MHz */
-	{532, 12, 2, 5, 8, 4, 62, 5, 5, 7},		/* 26 MHz   */
-	{-1, -1, -1, -1, -1, -1, -1, -1, -1, -1},	/* 27 MHz   */
-	{665, 23, 2, 5, 8, 4, 62, 5, 5, 7}		/* 38.4 MHz */
-};
-
-static const struct dpll_params
-			core_dpll_params_2128mhz_ddr266[NUM_SYS_CLKS] = {
-	{266, 2, 4, 5, 8, 8, 62, 10, 10, 14},		/* 12 MHz   */
-	{-1, -1, -1, -1, -1, -1, -1, -1, -1, -1},	/* 13 MHz   */
-	{570, 8, 4, 5, 8, 8, 62, 10, 10, 14},		/* 16.8 MHz */
-	{665, 11, 4, 5, 8, 8, 62, 10, 10, 14},		/* 19.2 MHz */
-	{532, 12, 4, 8, 8, 8, 62, 10, 10, 14},		/* 26 MHz   */
-	{-1, -1, -1, -1, -1, -1, -1, -1, -1, -1},	/* 27 MHz   */
-	{665, 23, 4, 8, 8, 8, 62, 10, 10, 14}		/* 38.4 MHz */
-};
-
-static const struct dpll_params per_dpll_params_768mhz[NUM_SYS_CLKS] = {
-	{32, 0, 4, 3, 6, 4, -1, 2, -1, -1},		/* 12 MHz   */
-	{-1, -1, -1, -1, -1, -1, -1, -1, -1, -1},	/* 13 MHz   */
-	{160, 6, 4, 3, 6, 4, -1, 2, -1, -1},		/* 16.8 MHz */
-	{20, 0, 4, 3, 6, 4, -1, 2, -1, -1},		/* 19.2 MHz */
-	{192, 12, 4, 3, 6, 4, -1, 2, -1, -1},		/* 26 MHz   */
-	{-1, -1, -1, -1, -1, -1, -1, -1, -1, -1},	/* 27 MHz   */
-	{10, 0, 4, 3, 6, 4, -1, 2, -1, -1}		/* 38.4 MHz */
-};
-
-static const struct dpll_params iva_dpll_params_2330mhz[NUM_SYS_CLKS] = {
-	{1165, 11, -1, -1, 5, 6, -1, -1, -1, -1},	/* 12 MHz   */
-	{-1, -1, -1, -1, -1, -1, -1, -1, -1, -1},	/* 13 MHz   */
-	{2011, 28, -1, -1, 5, 6, -1, -1, -1, -1},	/* 16.8 MHz */
-	{1881, 30, -1, -1, 5, 6, -1, -1, -1, -1},	/* 19.2 MHz */
-	{1165, 25, -1, -1, 5, 6, -1, -1, -1, -1},	/* 26 MHz   */
-	{-1, -1, -1, -1, -1, -1, -1, -1, -1, -1},	/* 27 MHz   */
-	{1972, 64, -1, -1, 5, 6, -1, -1, -1, -1}	/* 38.4 MHz */
-};
-
-/* ABE M & N values with sys_clk as source */
-static const struct dpll_params
-		abe_dpll_params_sysclk_196608khz[NUM_SYS_CLKS] = {
-	{49, 5, 1, -1, -1, -1, -1, -1, -1, -1},		/* 12 MHz   */
-	{-1, -1, -1, -1, -1, -1, -1, -1, -1, -1},	/* 13 MHz   */
-	{35, 5, 1, 1, -1, -1, -1, -1, -1, -1},		/* 16.8 MHz */
-	{46, 8, 1, 1, -1, -1, -1, -1, -1, -1},		/* 19.2 MHz */
-	{34, 8, 1, 1, -1, -1, -1, -1, -1, -1},		/* 26 MHz   */
-	{-1, -1, -1, -1, -1, -1, -1, -1, -1, -1},	/* 27 MHz   */
-	{64, 24, 1, 1, -1, -1, -1, -1, -1, -1}		/* 38.4 MHz */
-};
-
-/* ABE M & N values with 32K clock as source */
-static const struct dpll_params abe_dpll_params_32k_196608khz = {
-	750, 0, 1, 1, -1, -1, -1, -1, -1, -1
-};
-
-static const struct dpll_params usb_dpll_params_1920mhz[NUM_SYS_CLKS] = {
-	{400, 4, 2, -1, -1, -1, -1, -1, -1, -1},	/* 12 MHz   */
-	{-1, -1, -1, -1, -1, -1, -1, -1, -1, -1},	/* 13 MHz   */
-	{400, 6, 2, -1, -1, -1, -1, -1, -1, -1},	/* 16.8 MHz */
-	{400, 7, 2, -1, -1, -1, -1, -1, -1, -1},	/* 19.2 MHz */
-	{480, 12, 2, -1, -1, -1, -1, -1, -1, -1},	/* 26 MHz   */
-	{-1, -1, -1, -1, -1, -1, -1, -1, -1, -1},	/* 27 MHz   */
-	{400, 15, 2, -1, -1, -1, -1, -1, -1, -1}	/* 38.4 MHz */
-};
-
-void setup_post_dividers(u32 *const base, const struct dpll_params *params)
-{
-	struct dpll_regs *const dpll_regs = (struct dpll_regs *)base;
-
-	/* Setup post-dividers */
-	if (params->m2 >= 0)
-		writel(params->m2, &dpll_regs->cm_div_m2_dpll);
-	if (params->m3 >= 0)
-		writel(params->m3, &dpll_regs->cm_div_m3_dpll);
-	if (params->h11 >= 0)
-		writel(params->h11, &dpll_regs->cm_div_h11_dpll);
-	if (params->h12 >= 0)
-		writel(params->h12, &dpll_regs->cm_div_h12_dpll);
-	if (params->h13 >= 0)
-		writel(params->h13, &dpll_regs->cm_div_h13_dpll);
-	if (params->h14 >= 0)
-		writel(params->h14, &dpll_regs->cm_div_h14_dpll);
-	if (params->h22 >= 0)
-		writel(params->h22, &dpll_regs->cm_div_h22_dpll);
-	if (params->h23 >= 0)
-		writel(params->h23, &dpll_regs->cm_div_h23_dpll);
-}
-
-const struct dpll_params *get_mpu_dpll_params(void)
-{
-	u32 sysclk_ind = get_sys_clk_index();
-	return &mpu_dpll_params_800mhz[sysclk_ind];
-}
-
-const struct dpll_params *get_core_dpll_params(void)
-{
-	u32 sysclk_ind = get_sys_clk_index();
-
-	/* Configuring the DDR to be at 532mhz */
-	return &core_dpll_params_2128mhz_ddr532[sysclk_ind];
-}
-
-const struct dpll_params *get_per_dpll_params(void)
-{
-	u32 sysclk_ind = get_sys_clk_index();
-	return &per_dpll_params_768mhz[sysclk_ind];
-}
-
-const struct dpll_params *get_iva_dpll_params(void)
-{
-	u32 sysclk_ind = get_sys_clk_index();
-	return &iva_dpll_params_2330mhz[sysclk_ind];
-}
-
-const struct dpll_params *get_usb_dpll_params(void)
-{
-	u32 sysclk_ind = get_sys_clk_index();
-	return &usb_dpll_params_1920mhz[sysclk_ind];
-}
-
-const struct dpll_params *get_abe_dpll_params(void)
-{
-#ifdef CONFIG_SYS_OMAP_ABE_SYSCK
-	u32 sysclk_ind = get_sys_clk_index();
-	return &abe_dpll_params_sysclk_196608khz[sysclk_ind];
-#else
-	return &abe_dpll_params_32k_196608khz;
-#endif
-}
-
-/*
- * Setup the voltages for vdd_mpu, vdd_core, and vdd_iva
- * We set the maximum voltages allowed here because Smart-Reflex is not
- * enabled in bootloader. Voltage initialization in the kernel will set
- * these to the nominal values after enabling Smart-Reflex
- */
-void scale_vcores(void)
-{
-	u32 volt_core, volt_mpu, volt_mm;
-
-	omap_vc_init(PRM_VC_I2C_CHANNEL_FREQ_KHZ);
-
-	/* Palmas settings */
-	if (omap_revision() != OMAP5432_ES1_0) {
-		volt_core = VDD_CORE;
-		volt_mpu = VDD_MPU;
-		volt_mm = VDD_MM;
-	} else {
-		volt_core = VDD_CORE_5432;
-		volt_mpu = VDD_MPU_5432;
-		volt_mm = VDD_MM_5432;
-	}
-
-	do_scale_vcore(SMPS_REG_ADDR_8_CORE, volt_core);
-	do_scale_vcore(SMPS_REG_ADDR_12_MPU, volt_mpu);
-	do_scale_vcore(SMPS_REG_ADDR_45_IVA, volt_mm);
-
-	if (omap_revision() == OMAP5432_ES1_0) {
-		/* Configure LDO SRAM "magic" bits */
-		writel(2, &prcm->prm_sldo_core_setup);
-		writel(2, &prcm->prm_sldo_mpu_setup);
-		writel(2, &prcm->prm_sldo_mm_setup);
-	}
-}
-
-u32 get_offset_code(u32 volt_offset)
-{
-	u32 offset_code, step = 10000; /* 10 mV represented in uV */
-
-	volt_offset -= PALMAS_SMPS_BASE_VOLT_UV;
-
-	offset_code = (volt_offset + step - 1) / step;
-
-	/*
-	 * Offset codes 1-6 all give the base voltage in Palmas
-	 * Offset code 0 switches OFF the SMPS
-	 */
-	return offset_code + 6;
-}
-
-/*
- * Enable essential clock domains, modules and
- * do some additional special settings needed
- */
-void enable_basic_clocks(void)
-{
-	u32 *const clk_domains_essential[] = {
-		&prcm->cm_l4per_clkstctrl,
-		&prcm->cm_l3init_clkstctrl,
-		&prcm->cm_memif_clkstctrl,
-		&prcm->cm_l4cfg_clkstctrl,
-		0
-	};
-
-	u32 *const clk_modules_hw_auto_essential[] = {
-		&prcm->cm_l3_2_gpmc_clkctrl,
-		&prcm->cm_memif_emif_1_clkctrl,
-		&prcm->cm_memif_emif_2_clkctrl,
-		&prcm->cm_l4cfg_l4_cfg_clkctrl,
-		&prcm->cm_wkup_gpio1_clkctrl,
-		&prcm->cm_l4per_gpio2_clkctrl,
-		&prcm->cm_l4per_gpio3_clkctrl,
-		&prcm->cm_l4per_gpio4_clkctrl,
-		&prcm->cm_l4per_gpio5_clkctrl,
-		&prcm->cm_l4per_gpio6_clkctrl,
-		0
-	};
-
-	u32 *const clk_modules_explicit_en_essential[] = {
-		&prcm->cm_wkup_gptimer1_clkctrl,
-		&prcm->cm_l3init_hsmmc1_clkctrl,
-		&prcm->cm_l3init_hsmmc2_clkctrl,
-		&prcm->cm_l4per_gptimer2_clkctrl,
-		&prcm->cm_wkup_wdtimer2_clkctrl,
-		&prcm->cm_l4per_uart3_clkctrl,
-		&prcm->cm_l4per_i2c1_clkctrl,
-		0
-	};
-
-	/* Enable optional additional functional clock for GPIO4 */
-	setbits_le32(&prcm->cm_l4per_gpio4_clkctrl,
-			GPIO4_CLKCTRL_OPTFCLKEN_MASK);
-
-	/* Enable 96 MHz clock for MMC1 & MMC2 */
-	setbits_le32(&prcm->cm_l3init_hsmmc1_clkctrl,
-			HSMMC_CLKCTRL_CLKSEL_MASK);
-	setbits_le32(&prcm->cm_l3init_hsmmc2_clkctrl,
-			HSMMC_CLKCTRL_CLKSEL_MASK);
-
-	/* Set the correct clock dividers for mmc */
-	setbits_le32(&prcm->cm_l3init_hsmmc1_clkctrl,
-			HSMMC_CLKCTRL_CLKSEL_DIV_MASK);
-	setbits_le32(&prcm->cm_l3init_hsmmc2_clkctrl,
-			HSMMC_CLKCTRL_CLKSEL_DIV_MASK);
-
-	/* Select 32KHz clock as the source of GPTIMER1 */
-	setbits_le32(&prcm->cm_wkup_gptimer1_clkctrl,
-			GPTIMER1_CLKCTRL_CLKSEL_MASK);
-
-	do_enable_clocks(clk_domains_essential,
-			 clk_modules_hw_auto_essential,
-			 clk_modules_explicit_en_essential,
-			 1);
-
-	/* Select 384Mhz for GPU as its the POR for ES1.0 */
-	setbits_le32(&prcm->cm_sgx_sgx_clkctrl,
-			CLKSEL_GPU_HYD_GCLK_MASK);
-	setbits_le32(&prcm->cm_sgx_sgx_clkctrl,
-			CLKSEL_GPU_CORE_GCLK_MASK);
-
-	/* Enable SCRM OPT clocks for PER and CORE dpll */
-	setbits_le32(&prcm->cm_wkupaon_scrm_clkctrl,
-			OPTFCLKEN_SCRM_PER_MASK);
-	setbits_le32(&prcm->cm_wkupaon_scrm_clkctrl,
-			OPTFCLKEN_SCRM_CORE_MASK);
-}
-
-void enable_basic_uboot_clocks(void)
-{
-	u32 *const clk_domains_essential[] = {
-		0
-	};
-
-	u32 *const clk_modules_hw_auto_essential[] = {
-		0
-	};
-
-	u32 *const clk_modules_explicit_en_essential[] = {
-		&prcm->cm_l4per_mcspi1_clkctrl,
-		&prcm->cm_l4per_i2c2_clkctrl,
-		&prcm->cm_l4per_i2c3_clkctrl,
-		&prcm->cm_l4per_i2c4_clkctrl,
-		&prcm->cm_l3init_hsusbtll_clkctrl,
-		&prcm->cm_l3init_hsusbhost_clkctrl,
-		&prcm->cm_l3init_fsusb_clkctrl,
-		0
-	};
-
-	do_enable_clocks(clk_domains_essential,
-			 clk_modules_hw_auto_essential,
-			 clk_modules_explicit_en_essential,
-			 1);
-}
-
-/*
- * Enable non-essential clock domains, modules and
- * do some additional special settings needed
- */
-void enable_non_essential_clocks(void)
-{
-	u32 *const clk_domains_non_essential[] = {
-		&prcm->cm_mpu_m3_clkstctrl,
-		&prcm->cm_ivahd_clkstctrl,
-		&prcm->cm_dsp_clkstctrl,
-		&prcm->cm_dss_clkstctrl,
-		&prcm->cm_sgx_clkstctrl,
-		&prcm->cm1_abe_clkstctrl,
-		&prcm->cm_c2c_clkstctrl,
-		&prcm->cm_cam_clkstctrl,
-		&prcm->cm_dss_clkstctrl,
-		&prcm->cm_sdma_clkstctrl,
-		0
-	};
-
-	u32 *const clk_modules_hw_auto_non_essential[] = {
-		&prcm->cm_mpu_m3_mpu_m3_clkctrl,
-		&prcm->cm_ivahd_ivahd_clkctrl,
-		&prcm->cm_ivahd_sl2_clkctrl,
-		&prcm->cm_dsp_dsp_clkctrl,
-		&prcm->cm_l3instr_l3_3_clkctrl,
-		&prcm->cm_l3instr_l3_instr_clkctrl,
-		&prcm->cm_l3instr_intrconn_wp1_clkctrl,
-		&prcm->cm_l3init_hsi_clkctrl,
-		&prcm->cm_l4per_hdq1w_clkctrl,
-		0
-	};
-
-	u32 *const clk_modules_explicit_en_non_essential[] = {
-		&prcm->cm1_abe_aess_clkctrl,
-		&prcm->cm1_abe_pdm_clkctrl,
-		&prcm->cm1_abe_dmic_clkctrl,
-		&prcm->cm1_abe_mcasp_clkctrl,
-		&prcm->cm1_abe_mcbsp1_clkctrl,
-		&prcm->cm1_abe_mcbsp2_clkctrl,
-		&prcm->cm1_abe_mcbsp3_clkctrl,
-		&prcm->cm1_abe_slimbus_clkctrl,
-		&prcm->cm1_abe_timer5_clkctrl,
-		&prcm->cm1_abe_timer6_clkctrl,
-		&prcm->cm1_abe_timer7_clkctrl,
-		&prcm->cm1_abe_timer8_clkctrl,
-		&prcm->cm1_abe_wdt3_clkctrl,
-		&prcm->cm_l4per_gptimer9_clkctrl,
-		&prcm->cm_l4per_gptimer10_clkctrl,
-		&prcm->cm_l4per_gptimer11_clkctrl,
-		&prcm->cm_l4per_gptimer3_clkctrl,
-		&prcm->cm_l4per_gptimer4_clkctrl,
-		&prcm->cm_l4per_mcspi2_clkctrl,
-		&prcm->cm_l4per_mcspi3_clkctrl,
-		&prcm->cm_l4per_mcspi4_clkctrl,
-		&prcm->cm_l4per_mmcsd3_clkctrl,
-		&prcm->cm_l4per_mmcsd4_clkctrl,
-		&prcm->cm_l4per_mmcsd5_clkctrl,
-		&prcm->cm_l4per_uart1_clkctrl,
-		&prcm->cm_l4per_uart2_clkctrl,
-		&prcm->cm_l4per_uart4_clkctrl,
-		&prcm->cm_wkup_keyboard_clkctrl,
-		&prcm->cm_wkup_wdtimer2_clkctrl,
-		&prcm->cm_cam_iss_clkctrl,
-		&prcm->cm_cam_fdif_clkctrl,
-		&prcm->cm_dss_dss_clkctrl,
-		&prcm->cm_sgx_sgx_clkctrl,
-		0
-	};
-
-	/* Enable optional functional clock for ISS */
-	setbits_le32(&prcm->cm_cam_iss_clkctrl, ISS_CLKCTRL_OPTFCLKEN_MASK);
-
-	/* Enable all optional functional clocks of DSS */
-	setbits_le32(&prcm->cm_dss_dss_clkctrl, DSS_CLKCTRL_OPTFCLKEN_MASK);
-
-	do_enable_clocks(clk_domains_non_essential,
-			 clk_modules_hw_auto_non_essential,
-			 clk_modules_explicit_en_non_essential,
-			 0);
-
-	/* Put camera module in no sleep mode */
-	clrsetbits_le32(&prcm->cm_cam_clkstctrl, MODULE_CLKCTRL_MODULEMODE_MASK,
-			CD_CLKCTRL_CLKTRCTRL_NO_SLEEP <<
-			MODULE_CLKCTRL_MODULEMODE_SHIFT);
-}
diff --git a/arch/arm/cpu/armv7/omap5/hw_data.c b/arch/arm/cpu/armv7/omap5/hw_data.c
new file mode 100644
index 0000000..ced274e
--- /dev/null
+++ b/arch/arm/cpu/armv7/omap5/hw_data.c
@@ -0,0 +1,596 @@
+/*
+ *
+ * HW data initialization for OMAP5
+ *
+ * (C) Copyright 2013
+ * Texas Instruments, <www.ti.com>
+ *
+ * Sricharan R <r.sricharan@ti.com>
+ *
+ * See file CREDITS for list of people who contributed to this
+ * project.
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of
+ * the License, or (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
+ * MA 02111-1307 USA
+ */
+#include <common.h>
+#include <asm/arch/omap.h>
+#include <asm/arch/sys_proto.h>
+#include <asm/omap_common.h>
+#include <asm/arch/clocks.h>
+#include <asm/omap_gpio.h>
+#include <asm/io.h>
+#include <asm/emif.h>
+
+struct prcm_regs const **prcm =
+			(struct prcm_regs const **) OMAP_SRAM_SCRATCH_PRCM_PTR;
+struct dplls const **dplls_data =
+			(struct dplls const **) OMAP_SRAM_SCRATCH_DPLLS_PTR;
+struct vcores_data const **omap_vcores =
+		(struct vcores_data const **) OMAP_SRAM_SCRATCH_VCORES_PTR;
+struct omap_sys_ctrl_regs const **ctrl =
+	(struct omap_sys_ctrl_regs const **)OMAP5_SRAM_SCRATCH_SYS_CTRL;
+
+/* OPP HIGH FREQUENCY for ES2.0 */
+static const struct dpll_params mpu_dpll_params_1_5ghz[NUM_SYS_CLKS] = {
+	{125, 0, 1, -1, -1, -1, -1, -1, -1, -1, -1, -1},	/* 12 MHz   */
+	{-1, -1, -1, -1, -1, -1, -1, -1, -1, -1, -1, -1},	/* 13 MHz   */
+	{625, 6, 1, -1, -1, -1, -1, -1, -1, -1, -1, -1},	/* 16.8 MHz */
+	{625, 7, 1, -1, -1, -1, -1, -1, -1, -1, -1, -1},	/* 19.2 MHz */
+	{750, 12, 1, -1, -1, -1, -1, -1, -1, -1, -1, -1},	/* 26 MHz   */
+	{-1, -1, -1, -1, -1, -1, -1, -1, -1, -1, -1, -1},	/* 27 MHz   */
+	{625, 15, 1, -1, -1, -1, -1, -1, -1, -1, -1, -1}	/* 38.4 MHz */
+};
+
+/* OPP NOM FREQUENCY for ES2.0, OPP HIGH for ES1.0 */
+static const struct dpll_params mpu_dpll_params_1100mhz[NUM_SYS_CLKS] = {
+	{275, 2, 1, -1, -1, -1, -1, -1, -1, -1, -1, -1},	/* 12 MHz   */
+	{-1, -1, -1, -1, -1, -1, -1, -1, -1, -1, -1, -1},	/* 13 MHz   */
+	{1375, 20, 1, -1, -1, -1, -1, -1, -1, -1, -1, -1},	/* 16.8 MHz */
+	{1375, 23, 1, -1, -1, -1, -1, -1, -1, -1, -1, -1},	/* 19.2 MHz */
+	{550, 12, 1, -1, -1, -1, -1, -1, -1, -1, -1, -1},	/* 26 MHz   */
+	{-1, -1, -1, -1, -1, -1, -1, -1, -1, -1, -1, -1},	/* 27 MHz   */
+	{1375, 47, 1, -1, -1, -1, -1, -1, -1, -1, -1, -1}	/* 38.4 MHz */
+};
+
+/* OPP NOM FREQUENCY for ES1.0 */
+static const struct dpll_params mpu_dpll_params_800mhz[NUM_SYS_CLKS] = {
+	{200, 2, 1, -1, -1, -1, -1, -1, -1, -1, -1, -1},	/* 12 MHz   */
+	{-1, -1, -1, -1, -1, -1, -1, -1, -1, -1, -1, -1},	/* 13 MHz   */
+	{1000, 20, 1, -1, -1, -1, -1, -1, -1, -1, -1, -1},	/* 16.8 MHz */
+	{375, 8, 1, -1, -1, -1, -1, -1, -1, -1, -1, -1},	/* 19.2 MHz */
+	{400, 12, 1, -1, -1, -1, -1, -1, -1, -1, -1, -1},	/* 26 MHz   */
+	{-1, -1, -1, -1, -1, -1, -1, -1, -1, -1, -1, -1},	/* 27 MHz   */
+	{375, 17, 1, -1, -1, -1, -1, -1, -1, -1, -1, -1}	/* 38.4 MHz */
+};
+
+/* OPP LOW FREQUENCY for ES1.0 */
+static const struct dpll_params mpu_dpll_params_400mhz[NUM_SYS_CLKS] = {
+	{200, 2, 2, -1, -1, -1, -1, -1, -1, -1, -1, -1},	/* 12 MHz   */
+	{-1, -1, -1, -1, -1, -1, -1, -1, -1, -1, -1, -1},	/* 13 MHz   */
+	{1000, 20, 2, -1, -1, -1, -1, -1, -1, -1, -1, -1},	/* 16.8 MHz */
+	{375, 8, 2, -1, -1, -1, -1, -1, -1, -1, -1, -1},	/* 19.2 MHz */
+	{400, 12, 2, -1, -1, -1, -1, -1, -1, -1, -1, -1},	/* 26 MHz   */
+	{-1, -1, -1, -1, -1, -1, -1, -1, -1, -1, -1, -1},	/* 27 MHz   */
+	{375, 17, 2, -1, -1, -1, -1, -1, -1, -1, -1, -1}	/* 38.4 MHz */
+};
+
+/* OPP LOW FREQUENCY for ES2.0 */
+static const struct dpll_params mpu_dpll_params_499mhz[NUM_SYS_CLKS] = {
+	{499, 11, 1, -1, -1, -1, -1, -1, -1, -1, -1, -1},	/* 12 MHz   */
+	{-1, -1, -1, -1, -1, -1, -1, -1, -1, -1, -1, -1},	/* 13 MHz   */
+	{297, 9, 1, -1, -1, -1, -1, -1, -1, -1, -1, -1},	/* 16.8 MHz */
+	{493, 18, 1, -1, -1, -1, -1, -1, -1, -1, -1, -1},	/* 19.2 MHz */
+	{499, 25, 1, -1, -1, -1, -1, -1, -1, -1, -1, -1},	/* 26 MHz   */
+	{-1, -1, -1, -1, -1, -1, -1, -1, -1, -1, -1, -1},	/* 27 MHz   */
+	{493, 37, 1, -1, -1, -1, -1, -1, -1, -1, -1, -1}	/* 38.4 MHz */
+};
+
+static const struct dpll_params mpu_dpll_params_1ghz[NUM_SYS_CLKS] = {
+	{250, 2, 1, -1, -1, -1, -1, -1, -1, -1, -1, -1},	/* 12 MHz   */
+	{-1, -1, -1, -1, -1, -1, -1, -1, -1, -1, -1, -1},	/* 13 MHz   */
+	{119, 1, 1, -1, -1, -1, -1, -1, -1, -1, -1, -1},	/* 16.8 MHz */
+	{625, 11, 1, -1, -1, -1, -1, -1, -1, -1, -1, -1},	/* 19.2 MHz */
+	{500, 12, 1, -1, -1, -1, -1, -1, -1, -1, -1, -1},	/* 26 MHz   */
+	{-1, -1, -1, -1, -1, -1, -1, -1, -1, -1, -1, -1},	/* 27 MHz   */
+	{625, 23, 1, -1, -1, -1, -1, -1, -1, -1, -1, -1},	/* 38.4 MHz */
+	{50, 0, 1, -1, -1, -1, -1, -1, -1, -1, -1, -1}		/* 20 MHz   */
+};
+
+static const struct dpll_params
+			core_dpll_params_2128mhz_ddr532[NUM_SYS_CLKS] = {
+	{266, 2, 2, 5, 8, 4, 62, 5, -1, 5, 7, -1},		/* 12 MHz   */
+	{-1, -1, -1, -1, -1, -1, -1, -1, -1, -1, -1, -1},	/* 13 MHz   */
+	{443, 6, 2, 5, 8, 4, 62, 5, -1, 5, 7, -1},		/* 16.8 MHz */
+	{277, 4, 2, 5, 8, 4, 62, 5, -1, 5, 7, -1},		/* 19.2 MHz */
+	{368, 8, 2, 5, 8, 4, 62, 5, -1, 5, 7, -1},		/* 26 MHz   */
+	{-1, -1, -1, -1, -1, -1, -1, -1, -1, -1, -1, -1},	/* 27 MHz   */
+	{277, 9, 2, 5, 8, 4, 62, 5, -1, 5, 7, -1}		/* 38.4 MHz */
+};
+
+static const struct dpll_params
+			core_dpll_params_2128mhz_ddr532_es2[NUM_SYS_CLKS] = {
+	{266, 2, 2, 5, 8, 4, 62, 63, 6, 5, 7, 6},		/* 12 MHz   */
+	{-1, -1, -1, -1, -1, -1, -1, -1, -1, -1, -1, -1},	/* 13 MHz   */
+	{443, 6, 2, 5, 8, 4, 62, 63, 6, 5, 7, 6},		/* 16.8 MHz */
+	{277, 4, 2, 5, 8, 4, 62, 63, 6, 5, 7, 6},		/* 19.2 MHz */
+	{368, 8, 2, 5, 8, 4, 62, 63, 6, 5, 7, 6},		/* 26 MHz   */
+	{-1, -1, -1, -1, -1, -1, -1, -1, -1, -1, -1, -1},	/* 27 MHz   */
+	{277, 9, 2, 5, 8, 4, 62, 63, 6, 5, 7, 6}		/* 38.4 MHz */
+};
+
+static const struct dpll_params
+		core_dpll_params_2128mhz_ddr532_dra7xx[NUM_SYS_CLKS] = {
+	{266, 2, 2, -1, -1, 4, 62, 5, -1, 5, 7, 6},		/* 12 MHz   */
+	{-1, -1, -1, -1, -1, -1, -1, -1, -1, -1, -1, -1},	/* 13 MHz   */
+	{443, 6, 2, -1, -1, 4, 62, 5, -1, 5, 7, 6},		/* 16.8 MHz */
+	{277, 4, 2, -1, -1, 4, 62, 5, -1, 5, 7, 6},		/* 19.2 MHz */
+	{368, 8, 2, -1, -1, 4, 62, 5, -1, 5, 7, 6},		/* 26 MHz   */
+	{-1, -1, -1, -1, -1, -1, -1, -1, -1, -1, -1, -1},	/* 27 MHz   */
+	{277, 9, 2, -1, -1, 4, 62, 5, -1, 5, 7, 6},		/* 38.4 MHz */
+	{266, 4, 2, -1, -1, 4, 62, 5, -1, 5, 7, 6}		/* 20 MHz   */
+};
+
+static const struct dpll_params
+			core_dpll_params_2128mhz_ddr266[NUM_SYS_CLKS] = {
+	{266, 2, 4, 8, 8, 8, 62, 10, -1, 10, 14, -1},		/* 12 MHz   */
+	{-1, -1, -1, -1, -1, -1, -1, -1, -1, -1, -1, -1},	/* 13 MHz   */
+	{443, 6, 4, 8, 8, 8, 62, 10, -1, 10, 14, -1},		/* 16.8 MHz */
+	{277, 4, 4, 8, 8, 8, 62, 10, -1, 10, 14, -1},		/* 19.2 MHz */
+	{368, 8, 4, 8, 8, 8, 62, 10, -1, 10, 14, -1},		/* 26 MHz   */
+	{-1, -1, -1, -1, -1, -1, -1, -1, -1, -1, -1, -1},	/* 27 MHz   */
+	{277, 9, 4, 8, 8, 8, 62, 10, -1, 10, 14, -1}		/* 38.4 MHz */
+};
+
+static const struct dpll_params
+			core_dpll_params_2128mhz_ddr266_es2[NUM_SYS_CLKS] = {
+	{266, 2, 4, 8, 8, 8, 62, 5, 12, 10, 14, 12},		/* 12 MHz   */
+	{-1, -1, -1, -1, -1, -1, -1, -1, -1, -1, -1, -1},	/* 13 MHz   */
+	{443, 6, 4, 8, 8, 8, 62, 5, 12, 10, 14, 12},		/* 16.8 MHz */
+	{277, 4, 4, 8, 8, 8, 62, 5, 12, 10, 14, 12},		/* 19.2 MHz */
+	{368, 8, 4, 8, 8, 8, 62, 5, 12, 10, 14, 12},		/* 26 MHz   */
+	{-1, -1, -1, -1, -1, -1, -1, -1, -1, -1, -1, -1},	/* 27 MHz   */
+	{277, 9, 4, 8, 8, 8, 62, 5, 12, 10, 14, 12}		/* 38.4 MHz */
+};
+
+static const struct dpll_params per_dpll_params_768mhz[NUM_SYS_CLKS] = {
+	{32, 0, 4, 3, 6, 4, -1, 2, -1, -1, -1, -1},		/* 12 MHz   */
+	{-1, -1, -1, -1, -1, -1, -1, -1, -1, -1, -1, -1},	/* 13 MHz   */
+	{160, 6, 4, 3, 6, 4, -1, 2, -1, -1, -1, -1},		/* 16.8 MHz */
+	{20, 0, 4, 3, 6, 4, -1, 2, -1, -1, -1, -1},		/* 19.2 MHz */
+	{192, 12, 4, 3, 6, 4, -1, 2, -1, -1, -1, -1},		/* 26 MHz   */
+	{-1, -1, -1, -1, -1, -1, -1, -1, -1, -1, -1, -1},	/* 27 MHz   */
+	{10, 0, 4, 3, 6, 4, -1, 2, -1, -1, -1, -1}		/* 38.4 MHz */
+};
+
+static const struct dpll_params per_dpll_params_768mhz_es2[NUM_SYS_CLKS] = {
+	{32, 0, 4, 3, 3, 4, -1, 2, -1, -1, -1, -1},		/* 12 MHz   */
+	{-1, -1, -1, -1, -1, -1, -1, -1, -1, -1, -1, -1},	/* 13 MHz   */
+	{160, 6, 4, 3, 3, 4, -1, 2, -1, -1, -1, -1},		/* 16.8 MHz */
+	{20, 0, 4, 3, 3, 4, -1, 2, -1, -1, -1, -1},		/* 19.2 MHz */
+	{192, 12, 4, 3, 3, 4, -1, 2, -1, -1, -1, -1},		/* 26 MHz   */
+	{-1, -1, -1, -1, -1, -1, -1, -1, -1, -1, -1, -1},	/* 27 MHz   */
+	{10, 0, 4, 3, 3, 4, -1, 2, -1, -1, -1, -1}		/* 38.4 MHz */
+};
+
+static const struct dpll_params per_dpll_params_768mhz_dra7xx[NUM_SYS_CLKS] = {
+	{32, 0, 4, -1, 3, 4, 10, 2, -1, -1, -1, -1},		/* 12 MHz   */
+	{-1, -1, -1, -1, -1, -1, -1, -1, -1, -1, -1, -1},	/* 13 MHz   */
+	{160, 6, 4, -1, 3, 4, 10, 2, -1, -1, -1, -1},		/* 16.8 MHz */
+	{20, 0, 4, -1, 3, 4, 10, 2, -1, -1, -1, -1},		/* 19.2 MHz */
+	{192, 12, 4, -1, 3, 4, 10, 2, -1, -1, -1, -1},		/* 26 MHz   */
+	{-1, -1, -1, -1, -1, -1, -1, -1, -1, -1, -1, -1},	/* 27 MHz   */
+	{10, 0, 4, -1, 3, 4, 10, 2, -1, -1, -1, -1},		/* 38.4 MHz */
+	{96, 4, 4, -1, 3, 4, 10, 2, -1, -1, -1, -1}		/* 20 MHz   */
+};
+
+static const struct dpll_params iva_dpll_params_2330mhz[NUM_SYS_CLKS] = {
+	{1165, 11, -1, -1, 5, 6, -1, -1, -1, -1, -1, -1},	/* 12 MHz   */
+	{-1, -1, -1, -1, -1, -1, -1, -1, -1, -1, -1, -1},	/* 13 MHz   */
+	{208, 2, -1, -1, 5, 6, -1, -1, -1, -1, -1, -1},		/* 16.8 MHz */
+	{182, 2, -1, -1, 5, 6, -1, -1, -1, -1, -1, -1},		/* 19.2 MHz */
+	{224, 4, -1, -1, 5, 6, -1, -1, -1, -1, -1, -1},		/* 26 MHz   */
+	{-1, -1, -1, -1, -1, -1, -1, -1, -1, -1, -1, -1},	/* 27 MHz   */
+	{91, 2, -1, -1, 5, 6, -1, -1, -1, -1, -1, -1}		/* 38.4 MHz */
+};
+
+/* ABE M & N values with sys_clk as source */
+static const struct dpll_params
+		abe_dpll_params_sysclk_196608khz[NUM_SYS_CLKS] = {
+	{49, 5, 1, -1, -1, -1, -1, -1, -1, -1, -1, -1},		/* 12 MHz   */
+	{-1, -1, -1, -1, -1, -1, -1, -1, -1, -1, -1, -1},	/* 13 MHz   */
+	{35, 5, 1, 1, -1, -1, -1, -1, -1, -1, -1, -1},		/* 16.8 MHz */
+	{46, 8, 1, 1, -1, -1, -1, -1, -1, -1, -1, -1},		/* 19.2 MHz */
+	{34, 8, 1, 1, -1, -1, -1, -1, -1, -1, -1, -1},		/* 26 MHz   */
+	{-1, -1, -1, -1, -1, -1, -1, -1, -1, -1, -1, -1},	/* 27 MHz   */
+	{64, 24, 1, 1, -1, -1, -1, -1, -1, -1, -1, -1}		/* 38.4 MHz */
+};
+
+/* ABE M & N values with 32K clock as source */
+static const struct dpll_params abe_dpll_params_32k_196608khz = {
+	750, 0, 1, 1, -1, -1, -1, -1, -1, -1, -1, -1
+};
+
+static const struct dpll_params usb_dpll_params_1920mhz[NUM_SYS_CLKS] = {
+	{400, 4, 2, -1, -1, -1, -1, -1, -1, -1, -1, -1},	/* 12 MHz   */
+	{-1, -1, -1, -1, -1, -1, -1, -1, -1, -1, -1, -1},	/* 13 MHz   */
+	{400, 6, 2, -1, -1, -1, -1, -1, -1, -1, -1, -1},	/* 16.8 MHz */
+	{400, 7, 2, -1, -1, -1, -1, -1, -1, -1, -1, -1},	/* 19.2 MHz */
+	{480, 12, 2, -1, -1, -1, -1, -1, -1, -1, -1, -1},	/* 26 MHz   */
+	{-1, -1, -1, -1, -1, -1, -1, -1, -1, -1, -1, -1},	/* 27 MHz   */
+	{400, 15, 2, -1, -1, -1, -1, -1, -1, -1, -1, -1},	/* 38.4 MHz */
+	{48, 0, 2, -1, -1, -1, -1, -1, -1, -1, -1, -1}		/* 20 MHz   */
+};
+
+static const struct dpll_params ddr_dpll_params_1066mhz[NUM_SYS_CLKS] = {
+	{533, 11, 1, 1, 4, -1, -1, -1, -1, -1, -1, -1},		/* 12 MHz   */
+	{-1, -1, -1, -1, -1, -1, -1, -1, -1, -1, -1, -1},	/* 13 MHz   */
+	{222, 6, 1, 1, 4, -1, -1, -1, -1, -1, -1, -1},		/* 16.8 MHz */
+	{111, 3, 1, 1, 4, -1, -1, -1, -1, -1, -1, -1},		/* 19.2 MHz */
+	{41, 1, 1, 1, 4, -1, -1, -1, -1, -1, -1, -1},		/* 26 MHz   */
+	{-1, -1, -1, -1, -1, -1, -1, -1, -1, -1, -1, -1},	/* 27 MHz   */
+	{347, 24, 1, 1, 4, -1, -1, -1, -1, -1, -1, -1},		/* 38.4 MHz */
+	{533, 19, 1, 1, 4, -1, -1, -1, -1, -1, -1, -1}		/* 20 MHz   */
+};
+
+struct dplls omap5_dplls_es1 = {
+	.mpu = mpu_dpll_params_800mhz,
+	.core = core_dpll_params_2128mhz_ddr532,
+	.per = per_dpll_params_768mhz,
+	.iva = iva_dpll_params_2330mhz,
+#ifdef CONFIG_SYS_OMAP_ABE_SYSCK
+	.abe = abe_dpll_params_sysclk_196608khz,
+#else
+	.abe = &abe_dpll_params_32k_196608khz,
+#endif
+	.usb = usb_dpll_params_1920mhz,
+	.ddr = NULL
+};
+
+struct dplls omap5_dplls_es2 = {
+	.mpu = mpu_dpll_params_1100mhz,
+	.core = core_dpll_params_2128mhz_ddr532_es2,
+	.per = per_dpll_params_768mhz_es2,
+	.iva = iva_dpll_params_2330mhz,
+#ifdef CONFIG_SYS_OMAP_ABE_SYSCK
+	.abe = abe_dpll_params_sysclk_196608khz,
+#else
+	.abe = &abe_dpll_params_32k_196608khz,
+#endif
+	.usb = usb_dpll_params_1920mhz,
+	.ddr = NULL
+};
+
+struct dplls dra7xx_dplls = {
+	.mpu = mpu_dpll_params_1ghz,
+	.core = core_dpll_params_2128mhz_ddr532_dra7xx,
+	.per = per_dpll_params_768mhz_dra7xx,
+	.usb = usb_dpll_params_1920mhz,
+	.ddr = ddr_dpll_params_1066mhz,
+};
+
+struct pmic_data palmas = {
+	.base_offset = PALMAS_SMPS_BASE_VOLT_UV,
+	.step = 10000, /* 10 mV represented in uV */
+	/*
+	 * Offset codes 1-6 all give the base voltage in Palmas
+	 * Offset code 0 switches OFF the SMPS
+	 */
+	.start_code = 6,
+};
+
+struct vcores_data omap5430_volts = {
+	.mpu.value = VDD_MPU,
+	.mpu.addr = SMPS_REG_ADDR_12_MPU,
+	.mpu.pmic = &palmas,
+
+	.core.value = VDD_CORE,
+	.core.addr = SMPS_REG_ADDR_8_CORE,
+	.core.pmic = &palmas,
+
+	.mm.value = VDD_MM,
+	.mm.addr = SMPS_REG_ADDR_45_IVA,
+	.mm.pmic = &palmas,
+};
+
+struct vcores_data omap5430_volts_es2 = {
+	.mpu.value = VDD_MPU_ES2,
+	.mpu.addr = SMPS_REG_ADDR_12_MPU,
+	.mpu.pmic = &palmas,
+
+	.core.value = VDD_CORE_ES2,
+	.core.addr = SMPS_REG_ADDR_8_CORE,
+	.core.pmic = &palmas,
+
+	.mm.value = VDD_MM_ES2,
+	.mm.addr = SMPS_REG_ADDR_45_IVA,
+	.mm.pmic = &palmas,
+};
+
+/*
+ * Enable essential clock domains, modules and
+ * do some additional special settings needed
+ */
+void enable_basic_clocks(void)
+{
+	u32 const clk_domains_essential[] = {
+		(*prcm)->cm_l4per_clkstctrl,
+		(*prcm)->cm_l3init_clkstctrl,
+		(*prcm)->cm_memif_clkstctrl,
+		(*prcm)->cm_l4cfg_clkstctrl,
+		0
+	};
+
+	u32 const clk_modules_hw_auto_essential[] = {
+		(*prcm)->cm_l3_gpmc_clkctrl,
+		(*prcm)->cm_memif_emif_1_clkctrl,
+		(*prcm)->cm_memif_emif_2_clkctrl,
+		(*prcm)->cm_l4cfg_l4_cfg_clkctrl,
+		(*prcm)->cm_wkup_gpio1_clkctrl,
+		(*prcm)->cm_l4per_gpio2_clkctrl,
+		(*prcm)->cm_l4per_gpio3_clkctrl,
+		(*prcm)->cm_l4per_gpio4_clkctrl,
+		(*prcm)->cm_l4per_gpio5_clkctrl,
+		(*prcm)->cm_l4per_gpio6_clkctrl,
+		0
+	};
+
+	u32 const clk_modules_explicit_en_essential[] = {
+		(*prcm)->cm_wkup_gptimer1_clkctrl,
+		(*prcm)->cm_l3init_hsmmc1_clkctrl,
+		(*prcm)->cm_l3init_hsmmc2_clkctrl,
+		(*prcm)->cm_l4per_gptimer2_clkctrl,
+		(*prcm)->cm_wkup_wdtimer2_clkctrl,
+		(*prcm)->cm_l4per_uart3_clkctrl,
+		(*prcm)->cm_l4per_i2c1_clkctrl,
+		0
+	};
+
+	/* Enable optional additional functional clock for GPIO4 */
+	setbits_le32((*prcm)->cm_l4per_gpio4_clkctrl,
+			GPIO4_CLKCTRL_OPTFCLKEN_MASK);
+
+	/* Enable 96 MHz clock for MMC1 & MMC2 */
+	setbits_le32((*prcm)->cm_l3init_hsmmc1_clkctrl,
+			HSMMC_CLKCTRL_CLKSEL_MASK);
+	setbits_le32((*prcm)->cm_l3init_hsmmc2_clkctrl,
+			HSMMC_CLKCTRL_CLKSEL_MASK);
+
+	/* Set the correct clock dividers for mmc */
+	setbits_le32((*prcm)->cm_l3init_hsmmc1_clkctrl,
+			HSMMC_CLKCTRL_CLKSEL_DIV_MASK);
+	setbits_le32((*prcm)->cm_l3init_hsmmc2_clkctrl,
+			HSMMC_CLKCTRL_CLKSEL_DIV_MASK);
+
+	/* Select 32KHz clock as the source of GPTIMER1 */
+	setbits_le32((*prcm)->cm_wkup_gptimer1_clkctrl,
+			GPTIMER1_CLKCTRL_CLKSEL_MASK);
+
+	do_enable_clocks(clk_domains_essential,
+			 clk_modules_hw_auto_essential,
+			 clk_modules_explicit_en_essential,
+			 1);
+
+	/* Select 384Mhz for GPU as its the POR for ES1.0 */
+	setbits_le32((*prcm)->cm_sgx_sgx_clkctrl,
+			CLKSEL_GPU_HYD_GCLK_MASK);
+	setbits_le32((*prcm)->cm_sgx_sgx_clkctrl,
+			CLKSEL_GPU_CORE_GCLK_MASK);
+
+	/* Enable SCRM OPT clocks for PER and CORE dpll */
+	setbits_le32((*prcm)->cm_wkupaon_scrm_clkctrl,
+			OPTFCLKEN_SCRM_PER_MASK);
+	setbits_le32((*prcm)->cm_wkupaon_scrm_clkctrl,
+			OPTFCLKEN_SCRM_CORE_MASK);
+}
+
+void enable_basic_uboot_clocks(void)
+{
+	u32 const clk_domains_essential[] = {
+		0
+	};
+
+	u32 const clk_modules_hw_auto_essential[] = {
+		0
+	};
+
+	u32 const clk_modules_explicit_en_essential[] = {
+		(*prcm)->cm_l4per_mcspi1_clkctrl,
+		(*prcm)->cm_l4per_i2c2_clkctrl,
+		(*prcm)->cm_l4per_i2c3_clkctrl,
+		(*prcm)->cm_l4per_i2c4_clkctrl,
+		(*prcm)->cm_l3init_hsusbtll_clkctrl,
+		(*prcm)->cm_l3init_hsusbhost_clkctrl,
+		(*prcm)->cm_l3init_fsusb_clkctrl,
+		0
+	};
+
+	do_enable_clocks(clk_domains_essential,
+			 clk_modules_hw_auto_essential,
+			 clk_modules_explicit_en_essential,
+			 1);
+}
+
+/*
+ * Enable non-essential clock domains, modules and
+ * do some additional special settings needed
+ */
+void enable_non_essential_clocks(void)
+{
+	u32 const clk_domains_non_essential[] = {
+		(*prcm)->cm_mpu_m3_clkstctrl,
+		(*prcm)->cm_ivahd_clkstctrl,
+		(*prcm)->cm_dsp_clkstctrl,
+		(*prcm)->cm_dss_clkstctrl,
+		(*prcm)->cm_sgx_clkstctrl,
+		(*prcm)->cm1_abe_clkstctrl,
+		(*prcm)->cm_c2c_clkstctrl,
+		(*prcm)->cm_cam_clkstctrl,
+		(*prcm)->cm_dss_clkstctrl,
+		(*prcm)->cm_sdma_clkstctrl,
+		0
+	};
+
+	u32 const clk_modules_hw_auto_non_essential[] = {
+		(*prcm)->cm_mpu_m3_mpu_m3_clkctrl,
+		(*prcm)->cm_ivahd_ivahd_clkctrl,
+		(*prcm)->cm_ivahd_sl2_clkctrl,
+		(*prcm)->cm_dsp_dsp_clkctrl,
+		(*prcm)->cm_l3instr_l3_3_clkctrl,
+		(*prcm)->cm_l3instr_l3_instr_clkctrl,
+		(*prcm)->cm_l3instr_intrconn_wp1_clkctrl,
+		(*prcm)->cm_l3init_hsi_clkctrl,
+		(*prcm)->cm_l4per_hdq1w_clkctrl,
+		0
+	};
+
+	u32 const clk_modules_explicit_en_non_essential[] = {
+		(*prcm)->cm1_abe_aess_clkctrl,
+		(*prcm)->cm1_abe_pdm_clkctrl,
+		(*prcm)->cm1_abe_dmic_clkctrl,
+		(*prcm)->cm1_abe_mcasp_clkctrl,
+		(*prcm)->cm1_abe_mcbsp1_clkctrl,
+		(*prcm)->cm1_abe_mcbsp2_clkctrl,
+		(*prcm)->cm1_abe_mcbsp3_clkctrl,
+		(*prcm)->cm1_abe_slimbus_clkctrl,
+		(*prcm)->cm1_abe_timer5_clkctrl,
+		(*prcm)->cm1_abe_timer6_clkctrl,
+		(*prcm)->cm1_abe_timer7_clkctrl,
+		(*prcm)->cm1_abe_timer8_clkctrl,
+		(*prcm)->cm1_abe_wdt3_clkctrl,
+		(*prcm)->cm_l4per_gptimer9_clkctrl,
+		(*prcm)->cm_l4per_gptimer10_clkctrl,
+		(*prcm)->cm_l4per_gptimer11_clkctrl,
+		(*prcm)->cm_l4per_gptimer3_clkctrl,
+		(*prcm)->cm_l4per_gptimer4_clkctrl,
+		(*prcm)->cm_l4per_mcspi2_clkctrl,
+		(*prcm)->cm_l4per_mcspi3_clkctrl,
+		(*prcm)->cm_l4per_mcspi4_clkctrl,
+		(*prcm)->cm_l4per_mmcsd3_clkctrl,
+		(*prcm)->cm_l4per_mmcsd4_clkctrl,
+		(*prcm)->cm_l4per_mmcsd5_clkctrl,
+		(*prcm)->cm_l4per_uart1_clkctrl,
+		(*prcm)->cm_l4per_uart2_clkctrl,
+		(*prcm)->cm_l4per_uart4_clkctrl,
+		(*prcm)->cm_wkup_keyboard_clkctrl,
+		(*prcm)->cm_wkup_wdtimer2_clkctrl,
+		(*prcm)->cm_cam_iss_clkctrl,
+		(*prcm)->cm_cam_fdif_clkctrl,
+		(*prcm)->cm_dss_dss_clkctrl,
+		(*prcm)->cm_sgx_sgx_clkctrl,
+		0
+	};
+
+	/* Enable optional functional clock for ISS */
+	setbits_le32((*prcm)->cm_cam_iss_clkctrl, ISS_CLKCTRL_OPTFCLKEN_MASK);
+
+	/* Enable all optional functional clocks of DSS */
+	setbits_le32((*prcm)->cm_dss_dss_clkctrl, DSS_CLKCTRL_OPTFCLKEN_MASK);
+
+	do_enable_clocks(clk_domains_non_essential,
+			 clk_modules_hw_auto_non_essential,
+			 clk_modules_explicit_en_non_essential,
+			 0);
+
+	/* Put camera module in no sleep mode */
+	clrsetbits_le32((*prcm)->cm_cam_clkstctrl,
+			MODULE_CLKCTRL_MODULEMODE_MASK,
+			CD_CLKCTRL_CLKTRCTRL_NO_SLEEP <<
+			MODULE_CLKCTRL_MODULEMODE_SHIFT);
+}
+
+const struct ctrl_ioregs ioregs_omap5430 = {
+	.ctrl_ddrch = DDR_IO_I_34OHM_SR_FASTEST_WD_DQ_NO_PULL_DQS_PULL_DOWN,
+	.ctrl_lpddr2ch = DDR_IO_I_34OHM_SR_FASTEST_WD_CK_CKE_NCS_CA_PULL_DOWN,
+	.ctrl_ddrio_0 = DDR_IO_0_DDR2_DQ_INT_EN_ALL_DDR3_CA_DIS_ALL,
+	.ctrl_ddrio_1 = DDR_IO_1_DQ_OUT_EN_ALL_DQ_INT_EN_ALL,
+	.ctrl_ddrio_2 = DDR_IO_2_CA_OUT_EN_ALL_CA_INT_EN_ALL,
+};
+
+const struct ctrl_ioregs ioregs_omap5432_es1 = {
+	.ctrl_ddrch = DDR_IO_I_40OHM_SR_FAST_WD_DQ_NO_PULL_DQS_NO_PULL,
+	.ctrl_lpddr2ch = 0x0,
+	.ctrl_ddr3ch = DDR_IO_I_40OHM_SR_SLOWEST_WD_DQ_NO_PULL_DQS_NO_PULL,
+	.ctrl_ddrio_0 = DDR_IO_0_VREF_CELLS_DDR3_VALUE,
+	.ctrl_ddrio_1 = DDR_IO_1_VREF_CELLS_DDR3_VALUE,
+	.ctrl_ddrio_2 = DDR_IO_2_VREF_CELLS_DDR3_VALUE,
+	.ctrl_emif_sdram_config_ext = SDRAM_CONFIG_EXT_RD_LVL_11_SAMPLES,
+};
+
+const struct ctrl_ioregs ioregs_omap5432_es2 = {
+	.ctrl_ddrch = DDR_IO_I_40OHM_SR_FAST_WD_DQ_NO_PULL_DQS_NO_PULL_ES2,
+	.ctrl_lpddr2ch = 0x0,
+	.ctrl_ddr3ch = DDR_IO_I_40OHM_SR_SLOWEST_WD_DQ_NO_PULL_DQS_NO_PULL_ES2,
+	.ctrl_ddrio_0 = DDR_IO_0_VREF_CELLS_DDR3_VALUE_ES2,
+	.ctrl_ddrio_1 = DDR_IO_1_VREF_CELLS_DDR3_VALUE_ES2,
+	.ctrl_ddrio_2 = DDR_IO_2_VREF_CELLS_DDR3_VALUE_ES2,
+	.ctrl_emif_sdram_config_ext = SDRAM_CONFIG_EXT_RD_LVL_11_SAMPLES,
+};
+
+void hw_data_init(void)
+{
+	u32 omap_rev = omap_revision();
+
+	switch (omap_rev) {
+
+	case OMAP5430_ES1_0:
+	case OMAP5432_ES1_0:
+	*prcm = &omap5_es1_prcm;
+	*dplls_data = &omap5_dplls_es1;
+	*omap_vcores = &omap5430_volts;
+	*ctrl = &omap5_ctrl;
+	break;
+
+	case OMAP5430_ES2_0:
+	case OMAP5432_ES2_0:
+	*prcm = &omap5_es2_prcm;
+	*dplls_data = &omap5_dplls_es2;
+	*omap_vcores = &omap5430_volts_es2;
+	*ctrl = &omap5_ctrl;
+	break;
+
+	case DRA752_ES1_0:
+	*prcm = &dra7xx_prcm;
+	*dplls_data = &dra7xx_dplls;
+	*omap_vcores = &omap5430_volts_es2;
+	*ctrl = &dra7xx_ctrl;
+	break;
+
+	default:
+		printf("\n INVALID OMAP REVISION ");
+	}
+}
+
+void get_ioregs(const struct ctrl_ioregs **regs)
+{
+	u32 omap_rev = omap_revision();
+
+	switch (omap_rev) {
+	case OMAP5430_ES1_0:
+	case OMAP5430_ES2_0:
+		*regs = &ioregs_omap5430;
+	break;
+	case OMAP5432_ES1_0:
+		*regs = &ioregs_omap5432_es1;
+	break;
+	case OMAP5432_ES2_0:
+	case DRA752_ES1_0:
+		*regs = &ioregs_omap5432_es2;
+	break;
+
+	default:
+		printf("\n INVALID OMAP REVISION ");
+	}
+}
diff --git a/arch/arm/cpu/armv7/omap5/hwinit.c b/arch/arm/cpu/armv7/omap5/hwinit.c
index d0c3ff7..2f4b247 100644
--- a/arch/arm/cpu/armv7/omap5/hwinit.c
+++ b/arch/arm/cpu/armv7/omap5/hwinit.c
@@ -32,6 +32,7 @@
 #include <asm/armv7.h>
 #include <asm/arch/cpu.h>
 #include <asm/arch/sys_proto.h>
+#include <asm/arch/clocks.h>
 #include <asm/sizes.h>
 #include <asm/utils.h>
 #include <asm/arch/gpio.h>
@@ -56,76 +57,58 @@
 /* LPDDR2 specific IO settings */
 static void io_settings_lpddr2(void)
 {
-	struct omap_sys_ctrl_regs *ioregs_base =
-		      (struct omap_sys_ctrl_regs *) SYSCTRL_GENERAL_CORE_BASE;
+	const struct ctrl_ioregs *ioregs;
 
-	writel(DDR_IO_I_34OHM_SR_FASTEST_WD_DQ_NO_PULL_DQS_PULL_DOWN,
-				&(ioregs_base->control_ddrch1_0));
-	writel(DDR_IO_I_34OHM_SR_FASTEST_WD_DQ_NO_PULL_DQS_PULL_DOWN,
-				&(ioregs_base->control_ddrch1_1));
-	writel(DDR_IO_I_34OHM_SR_FASTEST_WD_DQ_NO_PULL_DQS_PULL_DOWN,
-				&(ioregs_base->control_ddrch2_0));
-	writel(DDR_IO_I_34OHM_SR_FASTEST_WD_DQ_NO_PULL_DQS_PULL_DOWN,
-				&(ioregs_base->control_ddrch2_1));
-	writel(DDR_IO_I_34OHM_SR_FASTEST_WD_CK_CKE_NCS_CA_PULL_DOWN,
-				&(ioregs_base->control_lpddr2ch1_0));
-	writel(DDR_IO_I_34OHM_SR_FASTEST_WD_CK_CKE_NCS_CA_PULL_DOWN,
-				&(ioregs_base->control_lpddr2ch1_1));
-	writel(DDR_IO_0_DDR2_DQ_INT_EN_ALL_DDR3_CA_DIS_ALL,
-				&(ioregs_base->control_ddrio_0));
-	writel(DDR_IO_1_DQ_OUT_EN_ALL_DQ_INT_EN_ALL,
-				&(ioregs_base->control_ddrio_1));
-	writel(DDR_IO_2_CA_OUT_EN_ALL_CA_INT_EN_ALL,
-				&(ioregs_base->control_ddrio_2));
+	get_ioregs(&ioregs);
+	writel(ioregs->ctrl_ddrch, (*ctrl)->control_ddrch1_0);
+	writel(ioregs->ctrl_ddrch, (*ctrl)->control_ddrch1_1);
+	writel(ioregs->ctrl_ddrch, (*ctrl)->control_ddrch2_0);
+	writel(ioregs->ctrl_ddrch, (*ctrl)->control_ddrch2_1);
+	writel(ioregs->ctrl_lpddr2ch, (*ctrl)->control_lpddr2ch1_0);
+	writel(ioregs->ctrl_lpddr2ch, (*ctrl)->control_lpddr2ch1_1);
+	writel(ioregs->ctrl_ddrio_0, (*ctrl)->control_ddrio_0);
+	writel(ioregs->ctrl_ddrio_1, (*ctrl)->control_ddrio_1);
+	writel(ioregs->ctrl_ddrio_2, (*ctrl)->control_ddrio_2);
 }
 
 /* DDR3 specific IO settings */
 static void io_settings_ddr3(void)
 {
 	u32 io_settings = 0;
-	struct omap_sys_ctrl_regs *ioregs_base =
-		      (struct omap_sys_ctrl_regs *) SYSCTRL_GENERAL_CORE_BASE;
+	const struct ctrl_ioregs *ioregs;
 
-	writel(DDR_IO_I_40OHM_SR_SLOWEST_WD_DQ_NO_PULL_DQS_NO_PULL,
-				&(ioregs_base->control_ddr3ch1_0));
-	writel(DDR_IO_I_40OHM_SR_FAST_WD_DQ_NO_PULL_DQS_NO_PULL,
-				&(ioregs_base->control_ddrch1_0));
-	writel(DDR_IO_I_40OHM_SR_FAST_WD_DQ_NO_PULL_DQS_NO_PULL,
-				&(ioregs_base->control_ddrch1_1));
+	get_ioregs(&ioregs);
+	writel(ioregs->ctrl_ddr3ch, (*ctrl)->control_ddr3ch1_0);
+	writel(ioregs->ctrl_ddrch, (*ctrl)->control_ddrch1_0);
+	writel(ioregs->ctrl_ddrch, (*ctrl)->control_ddrch1_1);
 
-	writel(DDR_IO_I_40OHM_SR_SLOWEST_WD_DQ_NO_PULL_DQS_NO_PULL,
-				&(ioregs_base->control_ddr3ch2_0));
-	writel(DDR_IO_I_40OHM_SR_FAST_WD_DQ_NO_PULL_DQS_NO_PULL,
-				&(ioregs_base->control_ddrch2_0));
-	writel(DDR_IO_I_40OHM_SR_FAST_WD_DQ_NO_PULL_DQS_NO_PULL,
-				&(ioregs_base->control_ddrch2_1));
+	writel(ioregs->ctrl_ddr3ch, (*ctrl)->control_ddr3ch2_0);
+	writel(ioregs->ctrl_ddrch, (*ctrl)->control_ddrch2_0);
+	writel(ioregs->ctrl_ddrch, (*ctrl)->control_ddrch2_1);
 
-	writel(DDR_IO_0_VREF_CELLS_DDR3_VALUE,
-				&(ioregs_base->control_ddrio_0));
-	writel(DDR_IO_1_VREF_CELLS_DDR3_VALUE,
-				&(ioregs_base->control_ddrio_1));
-	writel(DDR_IO_2_VREF_CELLS_DDR3_VALUE,
-				&(ioregs_base->control_ddrio_2));
+	writel(ioregs->ctrl_ddrio_0, (*ctrl)->control_ddrio_0);
+	writel(ioregs->ctrl_ddrio_1, (*ctrl)->control_ddrio_1);
+	writel(ioregs->ctrl_ddrio_2, (*ctrl)->control_ddrio_2);
 
 	/* omap5432 does not use lpddr2 */
-	writel(0x0, &(ioregs_base->control_lpddr2ch1_0));
-	writel(0x0, &(ioregs_base->control_lpddr2ch1_1));
+	writel(ioregs->ctrl_lpddr2ch, (*ctrl)->control_lpddr2ch1_0);
+	writel(ioregs->ctrl_lpddr2ch, (*ctrl)->control_lpddr2ch1_1);
 
-	writel(SDRAM_CONFIG_EXT_RD_LVL_11_SAMPLES,
-			&(ioregs_base->control_emif1_sdram_config_ext));
-	writel(SDRAM_CONFIG_EXT_RD_LVL_11_SAMPLES,
-			&(ioregs_base->control_emif2_sdram_config_ext));
+	writel(ioregs->ctrl_emif_sdram_config_ext,
+	       (*ctrl)->control_emif1_sdram_config_ext);
+	writel(ioregs->ctrl_emif_sdram_config_ext,
+	       (*ctrl)->control_emif2_sdram_config_ext);
 
 	/* Disable DLL select */
-	io_settings = (readl(&(ioregs_base->control_port_emif1_sdram_config))
+	io_settings = (readl((*ctrl)->control_port_emif1_sdram_config)
 							& 0xFFEFFFFF);
 	writel(io_settings,
-		&(ioregs_base->control_port_emif1_sdram_config));
+		(*ctrl)->control_port_emif1_sdram_config);
 
-	io_settings = (readl(&(ioregs_base->control_port_emif2_sdram_config))
+	io_settings = (readl((*ctrl)->control_port_emif2_sdram_config)
 							& 0xFFEFFFFF);
 	writel(io_settings,
-		&(ioregs_base->control_port_emif2_sdram_config));
+		(*ctrl)->control_port_emif2_sdram_config);
 }
 
 /*
@@ -134,88 +117,198 @@
 void do_io_settings(void)
 {
 	u32 io_settings = 0, mask = 0;
-	struct omap_sys_ctrl_regs *ioregs_base =
-		      (struct omap_sys_ctrl_regs *) SYSCTRL_GENERAL_CORE_BASE;
 
 	/* Impedance settings EMMC, C2C 1,2, hsi2 */
 	mask = (ds_mask << 2) | (ds_mask << 8) |
 		(ds_mask << 16) | (ds_mask << 18);
-	io_settings = readl(&(ioregs_base->control_smart1io_padconf_0)) &
+	io_settings = readl((*ctrl)->control_smart1io_padconf_0) &
 				(~mask);
 	io_settings |= (ds_60_ohm << 8) | (ds_45_ohm << 16) |
 			(ds_45_ohm << 18) | (ds_60_ohm << 2);
-	writel(io_settings, &(ioregs_base->control_smart1io_padconf_0));
+	writel(io_settings, (*ctrl)->control_smart1io_padconf_0);
 
 	/* Impedance settings Mcspi2 */
 	mask = (ds_mask << 30);
-	io_settings = readl(&(ioregs_base->control_smart1io_padconf_1)) &
+	io_settings = readl((*ctrl)->control_smart1io_padconf_1) &
 			(~mask);
 	io_settings |= (ds_60_ohm << 30);
-	writel(io_settings, &(ioregs_base->control_smart1io_padconf_1));
+	writel(io_settings, (*ctrl)->control_smart1io_padconf_1);
 
 	/* Impedance settings C2C 3,4 */
 	mask = (ds_mask << 14) | (ds_mask << 16);
-	io_settings = readl(&(ioregs_base->control_smart1io_padconf_2)) &
+	io_settings = readl((*ctrl)->control_smart1io_padconf_2) &
 			(~mask);
 	io_settings |= (ds_45_ohm << 14) | (ds_45_ohm << 16);
-	writel(io_settings, &(ioregs_base->control_smart1io_padconf_2));
+	writel(io_settings, (*ctrl)->control_smart1io_padconf_2);
 
 	/* Slew rate settings EMMC, C2C 1,2 */
 	mask = (sc_mask << 8) | (sc_mask << 16) | (sc_mask << 18);
-	io_settings = readl(&(ioregs_base->control_smart2io_padconf_0)) &
+	io_settings = readl((*ctrl)->control_smart2io_padconf_0) &
 			(~mask);
 	io_settings |= (sc_fast << 8) | (sc_na << 16) | (sc_na << 18);
-	writel(io_settings, &(ioregs_base->control_smart2io_padconf_0));
+	writel(io_settings, (*ctrl)->control_smart2io_padconf_0);
 
 	/* Slew rate settings hsi2, Mcspi2 */
 	mask = (sc_mask << 24) | (sc_mask << 28);
-	io_settings = readl(&(ioregs_base->control_smart2io_padconf_1)) &
+	io_settings = readl((*ctrl)->control_smart2io_padconf_1) &
 			(~mask);
 	io_settings |= (sc_fast << 28) | (sc_fast << 24);
-	writel(io_settings, &(ioregs_base->control_smart2io_padconf_1));
+	writel(io_settings, (*ctrl)->control_smart2io_padconf_1);
 
 	/* Slew rate settings C2C 3,4 */
 	mask = (sc_mask << 16) | (sc_mask << 18);
-	io_settings = readl(&(ioregs_base->control_smart2io_padconf_2)) &
+	io_settings = readl((*ctrl)->control_smart2io_padconf_2) &
 			(~mask);
 	io_settings |= (sc_na << 16) | (sc_na << 18);
-	writel(io_settings, &(ioregs_base->control_smart2io_padconf_2));
+	writel(io_settings, (*ctrl)->control_smart2io_padconf_2);
 
 	/* impedance and slew rate settings for usb */
 	mask = (usb_i_mask << 29) | (usb_i_mask << 26) | (usb_i_mask << 23) |
 		(usb_i_mask << 20) | (usb_i_mask << 17) | (usb_i_mask << 14);
-	io_settings = readl(&(ioregs_base->control_smart3io_padconf_1)) &
+	io_settings = readl((*ctrl)->control_smart3io_padconf_1) &
 			(~mask);
 	io_settings |= (ds_60_ohm << 29) | (ds_60_ohm << 26) |
 		       (ds_60_ohm << 23) | (sc_fast << 20) |
 		       (sc_fast << 17) | (sc_fast << 14);
-	writel(io_settings, &(ioregs_base->control_smart3io_padconf_1));
+	writel(io_settings, (*ctrl)->control_smart3io_padconf_1);
 
-	if (omap_revision() <= OMAP5430_ES1_0)
+	if (emif_sdram_type() == EMIF_SDRAM_TYPE_LPDDR2)
 		io_settings_lpddr2();
 	else
 		io_settings_ddr3();
 
 	/* Efuse settings */
-	writel(EFUSE_1, &(ioregs_base->control_efuse_1));
-	writel(EFUSE_2, &(ioregs_base->control_efuse_2));
-	writel(EFUSE_3, &(ioregs_base->control_efuse_3));
-	writel(EFUSE_4, &(ioregs_base->control_efuse_4));
+	writel(EFUSE_1, (*ctrl)->control_efuse_1);
+	writel(EFUSE_2, (*ctrl)->control_efuse_2);
+	writel(EFUSE_3, (*ctrl)->control_efuse_3);
+	writel(EFUSE_4, (*ctrl)->control_efuse_4);
+}
+
+static const struct srcomp_params srcomp_parameters[NUM_SYS_CLKS] = {
+	{0x45, 0x1},	/* 12 MHz   */
+	{-1, -1},	/* 13 MHz   */
+	{0x63, 0x2},	/* 16.8 MHz */
+	{0x57, 0x2},	/* 19.2 MHz */
+	{0x20, 0x1},	/* 26 MHz   */
+	{-1, -1},	/* 27 MHz   */
+	{0x41, 0x3}	/* 38.4 MHz */
+};
+
+void srcomp_enable(void)
+{
+	u32 srcomp_value, mul_factor, div_factor, clk_val, i;
+	u32 sysclk_ind	= get_sys_clk_index();
+	u32 omap_rev	= omap_revision();
+
+	mul_factor = srcomp_parameters[sysclk_ind].multiply_factor;
+	div_factor = srcomp_parameters[sysclk_ind].divide_factor;
+
+	for (i = 0; i < 4; i++) {
+		srcomp_value = readl((*ctrl)->control_srcomp_north_side + i*4);
+		srcomp_value &=
+			~(MULTIPLY_FACTOR_XS_MASK | DIVIDE_FACTOR_XS_MASK);
+		srcomp_value |= (mul_factor << MULTIPLY_FACTOR_XS_SHIFT) |
+			(div_factor << DIVIDE_FACTOR_XS_SHIFT);
+		writel(srcomp_value, (*ctrl)->control_srcomp_north_side + i*4);
+	}
+
+	if ((omap_rev == OMAP5430_ES1_0) || (omap_rev == OMAP5432_ES1_0)) {
+		clk_val = readl((*prcm)->cm_coreaon_io_srcomp_clkctrl);
+		clk_val |= OPTFCLKEN_SRCOMP_FCLK_MASK;
+		writel(clk_val, (*prcm)->cm_coreaon_io_srcomp_clkctrl);
+
+		for (i = 0; i < 4; i++) {
+			srcomp_value =
+				readl((*ctrl)->control_srcomp_north_side + i*4);
+			srcomp_value &= ~PWRDWN_XS_MASK;
+			writel(srcomp_value,
+			       (*ctrl)->control_srcomp_north_side + i*4);
+
+			while (((readl((*ctrl)->control_srcomp_north_side + i*4)
+				& SRCODE_READ_XS_MASK) >>
+				SRCODE_READ_XS_SHIFT) == 0)
+				;
+
+			srcomp_value =
+				readl((*ctrl)->control_srcomp_north_side + i*4);
+			srcomp_value &= ~OVERRIDE_XS_MASK;
+			writel(srcomp_value,
+			       (*ctrl)->control_srcomp_north_side + i*4);
+		}
+	} else {
+		srcomp_value = readl((*ctrl)->control_srcomp_east_side_wkup);
+		srcomp_value &= ~(MULTIPLY_FACTOR_XS_MASK |
+				  DIVIDE_FACTOR_XS_MASK);
+		srcomp_value |= (mul_factor << MULTIPLY_FACTOR_XS_SHIFT) |
+				(div_factor << DIVIDE_FACTOR_XS_SHIFT);
+		writel(srcomp_value, (*ctrl)->control_srcomp_east_side_wkup);
+
+		for (i = 0; i < 4; i++) {
+			srcomp_value =
+				readl((*ctrl)->control_srcomp_north_side + i*4);
+			srcomp_value |= SRCODE_OVERRIDE_SEL_XS_MASK;
+			writel(srcomp_value,
+			       (*ctrl)->control_srcomp_north_side + i*4);
+
+			srcomp_value =
+				readl((*ctrl)->control_srcomp_north_side + i*4);
+			srcomp_value &= ~OVERRIDE_XS_MASK;
+			writel(srcomp_value,
+			       (*ctrl)->control_srcomp_north_side + i*4);
+		}
+
+		srcomp_value =
+			readl((*ctrl)->control_srcomp_east_side_wkup);
+		srcomp_value |= SRCODE_OVERRIDE_SEL_XS_MASK;
+		writel(srcomp_value, (*ctrl)->control_srcomp_east_side_wkup);
+
+		srcomp_value =
+			readl((*ctrl)->control_srcomp_east_side_wkup);
+		srcomp_value &= ~OVERRIDE_XS_MASK;
+		writel(srcomp_value, (*ctrl)->control_srcomp_east_side_wkup);
+
+		clk_val = readl((*prcm)->cm_coreaon_io_srcomp_clkctrl);
+		clk_val |= OPTFCLKEN_SRCOMP_FCLK_MASK;
+		writel(clk_val, (*prcm)->cm_coreaon_io_srcomp_clkctrl);
+
+		clk_val = readl((*prcm)->cm_wkupaon_io_srcomp_clkctrl);
+		clk_val |= OPTFCLKEN_SRCOMP_FCLK_MASK;
+		writel(clk_val, (*prcm)->cm_wkupaon_io_srcomp_clkctrl);
+
+		for (i = 0; i < 4; i++) {
+			while (((readl((*ctrl)->control_srcomp_north_side + i*4)
+				& SRCODE_READ_XS_MASK) >>
+				SRCODE_READ_XS_SHIFT) == 0)
+				;
+
+			srcomp_value =
+				readl((*ctrl)->control_srcomp_north_side + i*4);
+			srcomp_value &= ~SRCODE_OVERRIDE_SEL_XS_MASK;
+			writel(srcomp_value,
+			       (*ctrl)->control_srcomp_north_side + i*4);
+		}
+
+		while (((readl((*ctrl)->control_srcomp_east_side_wkup) &
+			SRCODE_READ_XS_MASK) >> SRCODE_READ_XS_SHIFT) == 0)
+			;
+
+		srcomp_value =
+			readl((*ctrl)->control_srcomp_east_side_wkup);
+		srcomp_value &= ~SRCODE_OVERRIDE_SEL_XS_MASK;
+		writel(srcomp_value, (*ctrl)->control_srcomp_east_side_wkup);
+	}
 }
 #endif
 
 void config_data_eye_leveling_samples(u32 emif_base)
 {
-	struct omap_sys_ctrl_regs *ioregs_base =
-		(struct omap_sys_ctrl_regs *) SYSCTRL_GENERAL_CORE_BASE;
-
 	/*EMIF_SDRAM_CONFIG_EXT-Read data eye leveling no of samples =4*/
 	if (emif_base == EMIF1_BASE)
 		writel(SDRAM_CONFIG_EXT_RD_LVL_4_SAMPLES,
-			&(ioregs_base->control_emif1_sdram_config_ext));
+			(*ctrl)->control_emif1_sdram_config_ext);
 	else if (emif_base == EMIF2_BASE)
 		writel(SDRAM_CONFIG_EXT_RD_LVL_4_SAMPLES,
-			&(ioregs_base->control_emif2_sdram_config_ext));
+			(*ctrl)->control_emif2_sdram_config_ext);
 }
 
 void init_omap_revision(void)
@@ -227,17 +320,25 @@
 	 */
 	unsigned int rev = cortex_rev();
 
-	switch (rev) {
-	case MIDR_CORTEX_A15_R0P0:
-		switch (readl(CONTROL_ID_CODE)) {
-		case OMAP5430_CONTROL_ID_CODE_ES1_0:
-			*omap_si_rev = OMAP5430_ES1_0;
-			break;
-		case OMAP5432_CONTROL_ID_CODE_ES1_0:
-		default:
-			*omap_si_rev = OMAP5432_ES1_0;
-			break;
-		}
+	switch (readl(CONTROL_ID_CODE)) {
+	case OMAP5430_CONTROL_ID_CODE_ES1_0:
+		*omap_si_rev = OMAP5430_ES1_0;
+		if (rev == MIDR_CORTEX_A15_R2P2)
+			*omap_si_rev = OMAP5430_ES2_0;
+		break;
+	case OMAP5432_CONTROL_ID_CODE_ES1_0:
+		*omap_si_rev = OMAP5432_ES1_0;
+		if (rev == MIDR_CORTEX_A15_R2P2)
+			*omap_si_rev = OMAP5432_ES2_0;
+		break;
+	case OMAP5430_CONTROL_ID_CODE_ES2_0:
+		*omap_si_rev = OMAP5430_ES2_0;
+		break;
+	case OMAP5432_CONTROL_ID_CODE_ES2_0:
+		*omap_si_rev = OMAP5432_ES2_0;
+		break;
+	case DRA752_CONTROL_ID_CODE_ES1_0:
+		*omap_si_rev = DRA752_ES1_0;
 		break;
 	default:
 		*omap_si_rev = OMAP5430_SILICON_ID_INVALID;
@@ -253,7 +354,12 @@
 	 * So use cold reset in case instead.
 	 */
 	if (omap_rev == OMAP5430_ES1_0)
-		writel(PRM_RSTCTRL_RESET << 0x1, PRM_RSTCTRL);
+		writel(PRM_RSTCTRL_RESET << 0x1, (*prcm)->prm_rstctrl);
 	else
-		writel(PRM_RSTCTRL_RESET, PRM_RSTCTRL);
+		writel(PRM_RSTCTRL_RESET, (*prcm)->prm_rstctrl);
+}
+
+u32 warm_reset(void)
+{
+	return readl((*prcm)->prm_rstst) & PRM_RSTST_WARM_RESET_MASK;
 }
diff --git a/arch/arm/cpu/armv7/omap5/prcm-regs.c b/arch/arm/cpu/armv7/omap5/prcm-regs.c
new file mode 100644
index 0000000..b8a61fe
--- /dev/null
+++ b/arch/arm/cpu/armv7/omap5/prcm-regs.c
@@ -0,0 +1,958 @@
+/*
+ *
+ * HW regs data for OMAP5 Soc
+ *
+ * (C) Copyright 2013
+ * Texas Instruments, <www.ti.com>
+ *
+ * Sricharan R <r.sricharan@ti.com>
+ *
+ * See file CREDITS for list of people who contributed to this
+ * project.
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of
+ * the License, or (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
+ * MA 02111-1307 USA
+ */
+
+#include <asm/omap_common.h>
+
+struct prcm_regs const omap5_es1_prcm = {
+	/* cm1.ckgen */
+	.cm_clksel_core = 0x4a004100,
+	.cm_clksel_abe = 0x4a004108,
+	.cm_dll_ctrl = 0x4a004110,
+	.cm_clkmode_dpll_core = 0x4a004120,
+	.cm_idlest_dpll_core = 0x4a004124,
+	.cm_autoidle_dpll_core = 0x4a004128,
+	.cm_clksel_dpll_core = 0x4a00412c,
+	.cm_div_m2_dpll_core = 0x4a004130,
+	.cm_div_m3_dpll_core = 0x4a004134,
+	.cm_div_h11_dpll_core = 0x4a004138,
+	.cm_div_h12_dpll_core = 0x4a00413c,
+	.cm_div_h13_dpll_core = 0x4a004140,
+	.cm_div_h14_dpll_core = 0x4a004144,
+	.cm_ssc_deltamstep_dpll_core = 0x4a004148,
+	.cm_ssc_modfreqdiv_dpll_core = 0x4a00414c,
+	.cm_emu_override_dpll_core = 0x4a004150,
+	.cm_div_h22_dpllcore = 0x4a004154,
+	.cm_div_h23_dpll_core = 0x4a004158,
+	.cm_clkmode_dpll_mpu = 0x4a004160,
+	.cm_idlest_dpll_mpu = 0x4a004164,
+	.cm_autoidle_dpll_mpu = 0x4a004168,
+	.cm_clksel_dpll_mpu = 0x4a00416c,
+	.cm_div_m2_dpll_mpu = 0x4a004170,
+	.cm_ssc_deltamstep_dpll_mpu = 0x4a004188,
+	.cm_ssc_modfreqdiv_dpll_mpu = 0x4a00418c,
+	.cm_bypclk_dpll_mpu = 0x4a00419c,
+	.cm_clkmode_dpll_iva = 0x4a0041a0,
+	.cm_idlest_dpll_iva = 0x4a0041a4,
+	.cm_autoidle_dpll_iva = 0x4a0041a8,
+	.cm_clksel_dpll_iva = 0x4a0041ac,
+	.cm_div_h11_dpll_iva = 0x4a0041b8,
+	.cm_div_h12_dpll_iva = 0x4a0041bc,
+	.cm_ssc_deltamstep_dpll_iva = 0x4a0041c8,
+	.cm_ssc_modfreqdiv_dpll_iva = 0x4a0041cc,
+	.cm_bypclk_dpll_iva = 0x4a0041dc,
+	.cm_clkmode_dpll_abe = 0x4a0041e0,
+	.cm_idlest_dpll_abe = 0x4a0041e4,
+	.cm_autoidle_dpll_abe = 0x4a0041e8,
+	.cm_clksel_dpll_abe = 0x4a0041ec,
+	.cm_div_m2_dpll_abe = 0x4a0041f0,
+	.cm_div_m3_dpll_abe = 0x4a0041f4,
+	.cm_ssc_deltamstep_dpll_abe = 0x4a004208,
+	.cm_ssc_modfreqdiv_dpll_abe = 0x4a00420c,
+	.cm_clkmode_dpll_ddrphy = 0x4a004220,
+	.cm_idlest_dpll_ddrphy = 0x4a004224,
+	.cm_autoidle_dpll_ddrphy = 0x4a004228,
+	.cm_clksel_dpll_ddrphy = 0x4a00422c,
+	.cm_div_m2_dpll_ddrphy = 0x4a004230,
+	.cm_div_h11_dpll_ddrphy = 0x4a004238,
+	.cm_div_h12_dpll_ddrphy = 0x4a00423c,
+	.cm_div_h13_dpll_ddrphy = 0x4a004240,
+	.cm_ssc_deltamstep_dpll_ddrphy = 0x4a004248,
+	.cm_shadow_freq_config1 = 0x4a004260,
+	.cm_mpu_mpu_clkctrl = 0x4a004320,
+
+	/* cm1.dsp */
+	.cm_dsp_clkstctrl = 0x4a004400,
+	.cm_dsp_dsp_clkctrl = 0x4a004420,
+
+	/* cm1.abe */
+	.cm1_abe_clkstctrl = 0x4a004500,
+	.cm1_abe_l4abe_clkctrl = 0x4a004520,
+	.cm1_abe_aess_clkctrl = 0x4a004528,
+	.cm1_abe_pdm_clkctrl = 0x4a004530,
+	.cm1_abe_dmic_clkctrl = 0x4a004538,
+	.cm1_abe_mcasp_clkctrl = 0x4a004540,
+	.cm1_abe_mcbsp1_clkctrl = 0x4a004548,
+	.cm1_abe_mcbsp2_clkctrl = 0x4a004550,
+	.cm1_abe_mcbsp3_clkctrl = 0x4a004558,
+	.cm1_abe_slimbus_clkctrl = 0x4a004560,
+	.cm1_abe_timer5_clkctrl = 0x4a004568,
+	.cm1_abe_timer6_clkctrl = 0x4a004570,
+	.cm1_abe_timer7_clkctrl = 0x4a004578,
+	.cm1_abe_timer8_clkctrl = 0x4a004580,
+	.cm1_abe_wdt3_clkctrl = 0x4a004588,
+
+	/* cm2.ckgen */
+	.cm_clksel_mpu_m3_iss_root = 0x4a008100,
+	.cm_clksel_usb_60mhz = 0x4a008104,
+	.cm_scale_fclk = 0x4a008108,
+	.cm_core_dvfs_perf1 = 0x4a008110,
+	.cm_core_dvfs_perf2 = 0x4a008114,
+	.cm_core_dvfs_perf3 = 0x4a008118,
+	.cm_core_dvfs_perf4 = 0x4a00811c,
+	.cm_core_dvfs_current = 0x4a008124,
+	.cm_iva_dvfs_perf_tesla = 0x4a008128,
+	.cm_iva_dvfs_perf_ivahd = 0x4a00812c,
+	.cm_iva_dvfs_perf_abe = 0x4a008130,
+	.cm_iva_dvfs_current = 0x4a008138,
+	.cm_clkmode_dpll_per = 0x4a008140,
+	.cm_idlest_dpll_per = 0x4a008144,
+	.cm_autoidle_dpll_per = 0x4a008148,
+	.cm_clksel_dpll_per = 0x4a00814c,
+	.cm_div_m2_dpll_per = 0x4a008150,
+	.cm_div_m3_dpll_per = 0x4a008154,
+	.cm_div_h11_dpll_per = 0x4a008158,
+	.cm_div_h12_dpll_per = 0x4a00815c,
+	.cm_div_h14_dpll_per = 0x4a008164,
+	.cm_ssc_deltamstep_dpll_per = 0x4a008168,
+	.cm_ssc_modfreqdiv_dpll_per = 0x4a00816c,
+	.cm_emu_override_dpll_per = 0x4a008170,
+	.cm_clkmode_dpll_usb = 0x4a008180,
+	.cm_idlest_dpll_usb = 0x4a008184,
+	.cm_autoidle_dpll_usb = 0x4a008188,
+	.cm_clksel_dpll_usb = 0x4a00818c,
+	.cm_div_m2_dpll_usb = 0x4a008190,
+	.cm_ssc_deltamstep_dpll_usb = 0x4a0081a8,
+	.cm_ssc_modfreqdiv_dpll_usb = 0x4a0081ac,
+	.cm_clkdcoldo_dpll_usb = 0x4a0081b4,
+	.cm_clkmode_dpll_unipro = 0x4a0081c0,
+	.cm_idlest_dpll_unipro = 0x4a0081c4,
+	.cm_autoidle_dpll_unipro = 0x4a0081c8,
+	.cm_clksel_dpll_unipro = 0x4a0081cc,
+	.cm_div_m2_dpll_unipro = 0x4a0081d0,
+	.cm_ssc_deltamstep_dpll_unipro = 0x4a0081e8,
+	.cm_ssc_modfreqdiv_dpll_unipro = 0x4a0081ec,
+
+	/* cm2.core */
+	.cm_coreaon_bandgap_clkctrl = 0x4a008648,
+	.cm_coreaon_io_srcomp_clkctrl = 0x4a008650,
+	.cm_l3_1_clkstctrl = 0x4a008700,
+	.cm_l3_1_dynamicdep = 0x4a008708,
+	.cm_l3_1_l3_1_clkctrl = 0x4a008720,
+	.cm_l3_2_clkstctrl = 0x4a008800,
+	.cm_l3_2_dynamicdep = 0x4a008808,
+	.cm_l3_2_l3_2_clkctrl = 0x4a008820,
+	.cm_l3_gpmc_clkctrl = 0x4a008828,
+	.cm_l3_2_ocmc_ram_clkctrl = 0x4a008830,
+	.cm_mpu_m3_clkstctrl = 0x4a008900,
+	.cm_mpu_m3_staticdep = 0x4a008904,
+	.cm_mpu_m3_dynamicdep = 0x4a008908,
+	.cm_mpu_m3_mpu_m3_clkctrl = 0x4a008920,
+	.cm_sdma_clkstctrl = 0x4a008a00,
+	.cm_sdma_staticdep = 0x4a008a04,
+	.cm_sdma_dynamicdep = 0x4a008a08,
+	.cm_sdma_sdma_clkctrl = 0x4a008a20,
+	.cm_memif_clkstctrl = 0x4a008b00,
+	.cm_memif_dmm_clkctrl = 0x4a008b20,
+	.cm_memif_emif_fw_clkctrl = 0x4a008b28,
+	.cm_memif_emif_1_clkctrl = 0x4a008b30,
+	.cm_memif_emif_2_clkctrl = 0x4a008b38,
+	.cm_memif_dll_clkctrl = 0x4a008b40,
+	.cm_memif_emif_h1_clkctrl = 0x4a008b50,
+	.cm_memif_emif_h2_clkctrl = 0x4a008b58,
+	.cm_memif_dll_h_clkctrl = 0x4a008b60,
+	.cm_c2c_clkstctrl = 0x4a008c00,
+	.cm_c2c_staticdep = 0x4a008c04,
+	.cm_c2c_dynamicdep = 0x4a008c08,
+	.cm_c2c_sad2d_clkctrl = 0x4a008c20,
+	.cm_c2c_modem_icr_clkctrl = 0x4a008c28,
+	.cm_c2c_sad2d_fw_clkctrl = 0x4a008c30,
+	.cm_l4cfg_clkstctrl = 0x4a008d00,
+	.cm_l4cfg_dynamicdep = 0x4a008d08,
+	.cm_l4cfg_l4_cfg_clkctrl = 0x4a008d20,
+	.cm_l4cfg_hw_sem_clkctrl = 0x4a008d28,
+	.cm_l4cfg_mailbox_clkctrl = 0x4a008d30,
+	.cm_l4cfg_sar_rom_clkctrl = 0x4a008d38,
+	.cm_l3instr_clkstctrl = 0x4a008e00,
+	.cm_l3instr_l3_3_clkctrl = 0x4a008e20,
+	.cm_l3instr_l3_instr_clkctrl = 0x4a008e28,
+	.cm_l3instr_intrconn_wp1_clkctrl = 0x4a008e40,
+
+	/* cm2.ivahd */
+	.cm_ivahd_clkstctrl = 0x4a008f00,
+	.cm_ivahd_ivahd_clkctrl = 0x4a008f20,
+	.cm_ivahd_sl2_clkctrl = 0x4a008f28,
+
+	/* cm2.cam */
+	.cm_cam_clkstctrl = 0x4a009000,
+	.cm_cam_iss_clkctrl = 0x4a009020,
+	.cm_cam_fdif_clkctrl = 0x4a009028,
+
+	/* cm2.dss */
+	.cm_dss_clkstctrl = 0x4a009100,
+	.cm_dss_dss_clkctrl = 0x4a009120,
+
+	/* cm2.sgx */
+	.cm_sgx_clkstctrl = 0x4a009200,
+	.cm_sgx_sgx_clkctrl = 0x4a009220,
+
+	/* cm2.l3init */
+	.cm_l3init_clkstctrl = 0x4a009300,
+	.cm_l3init_hsmmc1_clkctrl = 0x4a009328,
+	.cm_l3init_hsmmc2_clkctrl = 0x4a009330,
+	.cm_l3init_hsi_clkctrl = 0x4a009338,
+	.cm_l3init_hsusbhost_clkctrl = 0x4a009358,
+	.cm_l3init_hsusbotg_clkctrl = 0x4a009360,
+	.cm_l3init_hsusbtll_clkctrl = 0x4a009368,
+	.cm_l3init_p1500_clkctrl = 0x4a009378,
+	.cm_l3init_fsusb_clkctrl = 0x4a0093d0,
+	.cm_l3init_ocp2scp1_clkctrl = 0x4a0093e0,
+
+	/* cm2.l4per */
+	.cm_l4per_clkstctrl = 0x4a009400,
+	.cm_l4per_dynamicdep = 0x4a009408,
+	.cm_l4per_adc_clkctrl = 0x4a009420,
+	.cm_l4per_gptimer10_clkctrl = 0x4a009428,
+	.cm_l4per_gptimer11_clkctrl = 0x4a009430,
+	.cm_l4per_gptimer2_clkctrl = 0x4a009438,
+	.cm_l4per_gptimer3_clkctrl = 0x4a009440,
+	.cm_l4per_gptimer4_clkctrl = 0x4a009448,
+	.cm_l4per_gptimer9_clkctrl = 0x4a009450,
+	.cm_l4per_elm_clkctrl = 0x4a009458,
+	.cm_l4per_gpio2_clkctrl = 0x4a009460,
+	.cm_l4per_gpio3_clkctrl = 0x4a009468,
+	.cm_l4per_gpio4_clkctrl = 0x4a009470,
+	.cm_l4per_gpio5_clkctrl = 0x4a009478,
+	.cm_l4per_gpio6_clkctrl = 0x4a009480,
+	.cm_l4per_hdq1w_clkctrl = 0x4a009488,
+	.cm_l4per_hecc1_clkctrl = 0x4a009490,
+	.cm_l4per_hecc2_clkctrl = 0x4a009498,
+	.cm_l4per_i2c1_clkctrl = 0x4a0094a0,
+	.cm_l4per_i2c2_clkctrl = 0x4a0094a8,
+	.cm_l4per_i2c3_clkctrl = 0x4a0094b0,
+	.cm_l4per_i2c4_clkctrl = 0x4a0094b8,
+	.cm_l4per_l4per_clkctrl = 0x4a0094c0,
+	.cm_l4per_mcasp2_clkctrl = 0x4a0094d0,
+	.cm_l4per_mcasp3_clkctrl = 0x4a0094d8,
+	.cm_l4per_mgate_clkctrl = 0x4a0094e8,
+	.cm_l4per_mcspi1_clkctrl = 0x4a0094f0,
+	.cm_l4per_mcspi2_clkctrl = 0x4a0094f8,
+	.cm_l4per_mcspi3_clkctrl = 0x4a009500,
+	.cm_l4per_mcspi4_clkctrl = 0x4a009508,
+	.cm_l4per_gpio7_clkctrl = 0x4a009510,
+	.cm_l4per_gpio8_clkctrl = 0x4a009518,
+	.cm_l4per_mmcsd3_clkctrl = 0x4a009520,
+	.cm_l4per_mmcsd4_clkctrl = 0x4a009528,
+	.cm_l4per_msprohg_clkctrl = 0x4a009530,
+	.cm_l4per_slimbus2_clkctrl = 0x4a009538,
+	.cm_l4per_uart1_clkctrl = 0x4a009540,
+	.cm_l4per_uart2_clkctrl = 0x4a009548,
+	.cm_l4per_uart3_clkctrl = 0x4a009550,
+	.cm_l4per_uart4_clkctrl = 0x4a009558,
+	.cm_l4per_mmcsd5_clkctrl = 0x4a009560,
+	.cm_l4per_i2c5_clkctrl = 0x4a009568,
+	.cm_l4per_uart5_clkctrl = 0x4a009570,
+	.cm_l4per_uart6_clkctrl = 0x4a009578,
+	.cm_l4sec_clkstctrl = 0x4a009580,
+	.cm_l4sec_staticdep = 0x4a009584,
+	.cm_l4sec_dynamicdep = 0x4a009588,
+	.cm_l4sec_aes1_clkctrl = 0x4a0095a0,
+	.cm_l4sec_aes2_clkctrl = 0x4a0095a8,
+	.cm_l4sec_des3des_clkctrl = 0x4a0095b0,
+	.cm_l4sec_pkaeip29_clkctrl = 0x4a0095b8,
+	.cm_l4sec_rng_clkctrl = 0x4a0095c0,
+	.cm_l4sec_sha2md51_clkctrl = 0x4a0095c8,
+	.cm_l4sec_cryptodma_clkctrl = 0x4a0095d8,
+
+	/* l4 wkup regs */
+	.cm_abe_pll_ref_clksel = 0x4ae0610c,
+	.cm_sys_clksel = 0x4ae06110,
+	.cm_wkup_clkstctrl = 0x4ae07800,
+	.cm_wkup_l4wkup_clkctrl = 0x4ae07820,
+	.cm_wkup_wdtimer1_clkctrl = 0x4ae07828,
+	.cm_wkup_wdtimer2_clkctrl = 0x4ae07830,
+	.cm_wkup_gpio1_clkctrl = 0x4ae07838,
+	.cm_wkup_gptimer1_clkctrl = 0x4ae07840,
+	.cm_wkup_gptimer12_clkctrl = 0x4ae07848,
+	.cm_wkup_synctimer_clkctrl = 0x4ae07850,
+	.cm_wkup_usim_clkctrl = 0x4ae07858,
+	.cm_wkup_sarram_clkctrl = 0x4ae07860,
+	.cm_wkup_keyboard_clkctrl = 0x4ae07878,
+	.cm_wkup_rtc_clkctrl = 0x4ae07880,
+	.cm_wkup_bandgap_clkctrl = 0x4ae07888,
+	.cm_wkupaon_scrm_clkctrl = 0x4ae07890,
+	.cm_wkupaon_io_srcomp_clkctrl = 0x4ae07898,
+	.prm_rstctrl = 0x4ae07b00,
+	.prm_rstst = 0x4ae07b04,
+	.prm_vc_val_bypass = 0x4ae07ba0,
+	.prm_vc_cfg_i2c_mode = 0x4ae07bb4,
+	.prm_vc_cfg_i2c_clk = 0x4ae07bb8,
+	.prm_sldo_core_setup = 0x4ae07bc4,
+	.prm_sldo_core_ctrl = 0x4ae07bc8,
+	.prm_sldo_mpu_setup = 0x4ae07bcc,
+	.prm_sldo_mpu_ctrl = 0x4ae07bd0,
+	.prm_sldo_mm_setup = 0x4ae07bd4,
+	.prm_sldo_mm_ctrl = 0x4ae07bd8,
+};
+
+struct omap_sys_ctrl_regs const omap5_ctrl = {
+	.control_status				= 0x4A002134,
+	.control_paconf_global			= 0x4A002DA0,
+	.control_paconf_mode			= 0x4A002DA4,
+	.control_smart1io_padconf_0		= 0x4A002DA8,
+	.control_smart1io_padconf_1		= 0x4A002DAC,
+	.control_smart1io_padconf_2		= 0x4A002DB0,
+	.control_smart2io_padconf_0		= 0x4A002DB4,
+	.control_smart2io_padconf_1		= 0x4A002DB8,
+	.control_smart2io_padconf_2		= 0x4A002DBC,
+	.control_smart3io_padconf_0		= 0x4A002DC0,
+	.control_smart3io_padconf_1		= 0x4A002DC4,
+	.control_pbias				= 0x4A002E00,
+	.control_i2c_0				= 0x4A002E04,
+	.control_camera_rx			= 0x4A002E08,
+	.control_hdmi_tx_phy			= 0x4A002E0C,
+	.control_uniportm			= 0x4A002E10,
+	.control_dsiphy				= 0x4A002E14,
+	.control_mcbsplp			= 0x4A002E18,
+	.control_usb2phycore			= 0x4A002E1C,
+	.control_hdmi_1				= 0x4A002E20,
+	.control_hsi				= 0x4A002E24,
+	.control_ddr3ch1_0			= 0x4A002E30,
+	.control_ddr3ch2_0			= 0x4A002E34,
+	.control_ddrch1_0			= 0x4A002E38,
+	.control_ddrch1_1			= 0x4A002E3C,
+	.control_ddrch2_0			= 0x4A002E40,
+	.control_ddrch2_1			= 0x4A002E44,
+	.control_lpddr2ch1_0			= 0x4A002E48,
+	.control_lpddr2ch1_1			= 0x4A002E4C,
+	.control_ddrio_0			= 0x4A002E50,
+	.control_ddrio_1			= 0x4A002E54,
+	.control_ddrio_2			= 0x4A002E58,
+	.control_hyst_1				= 0x4A002E5C,
+	.control_usbb_hsic_control		= 0x4A002E60,
+	.control_c2c				= 0x4A002E64,
+	.control_core_control_spare_rw		= 0x4A002E68,
+	.control_core_control_spare_r		= 0x4A002E6C,
+	.control_core_control_spare_r_c0	= 0x4A002E70,
+	.control_srcomp_north_side		= 0x4A002E74,
+	.control_srcomp_south_side		= 0x4A002E78,
+	.control_srcomp_east_side		= 0x4A002E7C,
+	.control_srcomp_west_side		= 0x4A002E80,
+	.control_srcomp_code_latch		= 0x4A002E84,
+	.control_port_emif1_sdram_config	= 0x4AE0C110,
+	.control_port_emif1_lpddr2_nvm_config	= 0x4AE0C114,
+	.control_port_emif2_sdram_config	= 0x4AE0C118,
+	.control_emif1_sdram_config_ext		= 0x4AE0C144,
+	.control_emif2_sdram_config_ext		= 0x4AE0C148,
+	.control_smart1nopmio_padconf_0		= 0x4AE0CDA0,
+	.control_smart1nopmio_padconf_1		= 0x4AE0CDA4,
+	.control_padconf_mode			= 0x4AE0CDA8,
+	.control_xtal_oscillator		= 0x4AE0CDAC,
+	.control_i2c_2				= 0x4AE0CDB0,
+	.control_ckobuffer			= 0x4AE0CDB4,
+	.control_wkup_control_spare_rw		= 0x4AE0CDB8,
+	.control_wkup_control_spare_r		= 0x4AE0CDBC,
+	.control_wkup_control_spare_r_c0	= 0x4AE0CDC0,
+	.control_srcomp_east_side_wkup		= 0x4AE0CDC4,
+	.control_efuse_1			= 0x4AE0CDC8,
+	.control_efuse_2			= 0x4AE0CDCC,
+	.control_efuse_3			= 0x4AE0CDD0,
+	.control_efuse_4			= 0x4AE0CDD4,
+	.control_efuse_5			= 0x4AE0CDD8,
+	.control_efuse_6			= 0x4AE0CDDC,
+	.control_efuse_7			= 0x4AE0CDE0,
+	.control_efuse_8			= 0x4AE0CDE4,
+	.control_efuse_9			= 0x4AE0CDE8,
+	.control_efuse_10			= 0x4AE0CDEC,
+	.control_efuse_11			= 0x4AE0CDF0,
+	.control_efuse_12			= 0x4AE0CDF4,
+	.control_efuse_13			= 0x4AE0CDF8,
+};
+
+struct omap_sys_ctrl_regs const dra7xx_ctrl = {
+	.control_status				= 0x4A002134,
+	.control_core_mmr_lock1			= 0x4A002540,
+	.control_core_mmr_lock2			= 0x4A002544,
+	.control_core_mmr_lock3			= 0x4A002548,
+	.control_core_mmr_lock4			= 0x4A00254C,
+	.control_core_mmr_lock5			= 0x4A002550,
+	.control_core_control_io1		= 0x4A002554,
+	.control_core_control_io2		= 0x4A002558,
+	.control_paconf_global			= 0x4A002DA0,
+	.control_paconf_mode			= 0x4A002DA4,
+	.control_smart1io_padconf_0		= 0x4A002DA8,
+	.control_smart1io_padconf_1		= 0x4A002DAC,
+	.control_smart1io_padconf_2		= 0x4A002DB0,
+	.control_smart2io_padconf_0		= 0x4A002DB4,
+	.control_smart2io_padconf_1		= 0x4A002DB8,
+	.control_smart2io_padconf_2		= 0x4A002DBC,
+	.control_smart3io_padconf_0		= 0x4A002DC0,
+	.control_smart3io_padconf_1		= 0x4A002DC4,
+	.control_pbias				= 0x4A002E00,
+	.control_i2c_0				= 0x4A002E04,
+	.control_camera_rx			= 0x4A002E08,
+	.control_hdmi_tx_phy			= 0x4A002E0C,
+	.control_uniportm			= 0x4A002E10,
+	.control_dsiphy				= 0x4A002E14,
+	.control_mcbsplp			= 0x4A002E18,
+	.control_usb2phycore			= 0x4A002E1C,
+	.control_hdmi_1				= 0x4A002E20,
+	.control_hsi				= 0x4A002E24,
+	.control_ddr3ch1_0			= 0x4A002E30,
+	.control_ddr3ch2_0			= 0x4A002E34,
+	.control_ddrch1_0			= 0x4A002E38,
+	.control_ddrch1_1			= 0x4A002E3C,
+	.control_ddrch2_0			= 0x4A002E40,
+	.control_ddrch2_1			= 0x4A002E44,
+	.control_lpddr2ch1_0			= 0x4A002E48,
+	.control_lpddr2ch1_1			= 0x4A002E4C,
+	.control_ddrio_0			= 0x4A002E50,
+	.control_ddrio_1			= 0x4A002E54,
+	.control_ddrio_2			= 0x4A002E58,
+	.control_hyst_1				= 0x4A002E5C,
+	.control_usbb_hsic_control		= 0x4A002E60,
+	.control_c2c				= 0x4A002E64,
+	.control_core_control_spare_rw		= 0x4A002E68,
+	.control_core_control_spare_r		= 0x4A002E6C,
+	.control_core_control_spare_r_c0	= 0x4A002E70,
+	.control_srcomp_north_side		= 0x4A002E74,
+	.control_srcomp_south_side		= 0x4A002E78,
+	.control_srcomp_east_side		= 0x4A002E7C,
+	.control_srcomp_west_side		= 0x4A002E80,
+	.control_srcomp_code_latch		= 0x4A002E84,
+	.control_padconf_core_base		= 0x4A003400,
+	.control_port_emif1_sdram_config	= 0x4AE0C110,
+	.control_port_emif1_lpddr2_nvm_config	= 0x4AE0C114,
+	.control_port_emif2_sdram_config	= 0x4AE0C118,
+	.control_emif1_sdram_config_ext		= 0x4AE0C144,
+	.control_emif2_sdram_config_ext		= 0x4AE0C148,
+	.control_padconf_mode			= 0x4AE0C5A0,
+	.control_xtal_oscillator		= 0x4AE0C5A4,
+	.control_i2c_2				= 0x4AE0C5A8,
+	.control_ckobuffer			= 0x4AE0C5AC,
+	.control_wkup_control_spare_rw		= 0x4AE0C5B0,
+	.control_wkup_control_spare_r		= 0x4AE0C5B4,
+	.control_wkup_control_spare_r_c0	= 0x4AE0C5B8,
+	.control_srcomp_east_side_wkup		= 0x4AE0C5BC,
+	.control_efuse_1			= 0x4AE0C5C0,
+	.control_efuse_2			= 0x4AE0C5C4,
+	.control_efuse_3			= 0x4AE0C5C8,
+	.control_efuse_4			= 0x4AE0C5CC,
+	.control_efuse_13			= 0x4AE0C5F0,
+};
+
+struct prcm_regs const omap5_es2_prcm = {
+	/* cm1.ckgen */
+	.cm_clksel_core = 0x4a004100,
+	.cm_clksel_abe = 0x4a004108,
+	.cm_dll_ctrl = 0x4a004110,
+	.cm_clkmode_dpll_core = 0x4a004120,
+	.cm_idlest_dpll_core = 0x4a004124,
+	.cm_autoidle_dpll_core = 0x4a004128,
+	.cm_clksel_dpll_core = 0x4a00412c,
+	.cm_div_m2_dpll_core = 0x4a004130,
+	.cm_div_m3_dpll_core = 0x4a004134,
+	.cm_div_h11_dpll_core = 0x4a004138,
+	.cm_div_h12_dpll_core = 0x4a00413c,
+	.cm_div_h13_dpll_core = 0x4a004140,
+	.cm_div_h14_dpll_core = 0x4a004144,
+	.cm_ssc_deltamstep_dpll_core = 0x4a004148,
+	.cm_ssc_modfreqdiv_dpll_core = 0x4a00414c,
+	.cm_div_h21_dpll_core = 0x4a004150,
+	.cm_div_h22_dpllcore = 0x4a004154,
+	.cm_div_h23_dpll_core = 0x4a004158,
+	.cm_div_h24_dpll_core = 0x4a00415c,
+	.cm_clkmode_dpll_mpu = 0x4a004160,
+	.cm_idlest_dpll_mpu = 0x4a004164,
+	.cm_autoidle_dpll_mpu = 0x4a004168,
+	.cm_clksel_dpll_mpu = 0x4a00416c,
+	.cm_div_m2_dpll_mpu = 0x4a004170,
+	.cm_ssc_deltamstep_dpll_mpu = 0x4a004188,
+	.cm_ssc_modfreqdiv_dpll_mpu = 0x4a00418c,
+	.cm_bypclk_dpll_mpu = 0x4a00419c,
+	.cm_clkmode_dpll_iva = 0x4a0041a0,
+	.cm_idlest_dpll_iva = 0x4a0041a4,
+	.cm_autoidle_dpll_iva = 0x4a0041a8,
+	.cm_clksel_dpll_iva = 0x4a0041ac,
+	.cm_div_h11_dpll_iva = 0x4a0041b8,
+	.cm_div_h12_dpll_iva = 0x4a0041bc,
+	.cm_ssc_deltamstep_dpll_iva = 0x4a0041c8,
+	.cm_ssc_modfreqdiv_dpll_iva = 0x4a0041cc,
+	.cm_bypclk_dpll_iva = 0x4a0041dc,
+	.cm_clkmode_dpll_abe = 0x4a0041e0,
+	.cm_idlest_dpll_abe = 0x4a0041e4,
+	.cm_autoidle_dpll_abe = 0x4a0041e8,
+	.cm_clksel_dpll_abe = 0x4a0041ec,
+	.cm_div_m2_dpll_abe = 0x4a0041f0,
+	.cm_div_m3_dpll_abe = 0x4a0041f4,
+	.cm_ssc_deltamstep_dpll_abe = 0x4a004208,
+	.cm_ssc_modfreqdiv_dpll_abe = 0x4a00420c,
+	.cm_clkmode_dpll_ddrphy = 0x4a004220,
+	.cm_idlest_dpll_ddrphy = 0x4a004224,
+	.cm_autoidle_dpll_ddrphy = 0x4a004228,
+	.cm_clksel_dpll_ddrphy = 0x4a00422c,
+	.cm_div_m2_dpll_ddrphy = 0x4a004230,
+	.cm_div_h11_dpll_ddrphy = 0x4a004238,
+	.cm_div_h12_dpll_ddrphy = 0x4a00423c,
+	.cm_div_h13_dpll_ddrphy = 0x4a004240,
+	.cm_ssc_deltamstep_dpll_ddrphy = 0x4a004248,
+	.cm_shadow_freq_config1 = 0x4a004260,
+	.cm_mpu_mpu_clkctrl = 0x4a004320,
+
+	/* cm1.dsp */
+	.cm_dsp_clkstctrl = 0x4a004400,
+	.cm_dsp_dsp_clkctrl = 0x4a004420,
+
+	/* cm1.abe */
+	.cm1_abe_clkstctrl = 0x4a004500,
+	.cm1_abe_l4abe_clkctrl = 0x4a004520,
+	.cm1_abe_aess_clkctrl = 0x4a004528,
+	.cm1_abe_pdm_clkctrl = 0x4a004530,
+	.cm1_abe_dmic_clkctrl = 0x4a004538,
+	.cm1_abe_mcasp_clkctrl = 0x4a004540,
+	.cm1_abe_mcbsp1_clkctrl = 0x4a004548,
+	.cm1_abe_mcbsp2_clkctrl = 0x4a004550,
+	.cm1_abe_mcbsp3_clkctrl = 0x4a004558,
+	.cm1_abe_slimbus_clkctrl = 0x4a004560,
+	.cm1_abe_timer5_clkctrl = 0x4a004568,
+	.cm1_abe_timer6_clkctrl = 0x4a004570,
+	.cm1_abe_timer7_clkctrl = 0x4a004578,
+	.cm1_abe_timer8_clkctrl = 0x4a004580,
+	.cm1_abe_wdt3_clkctrl = 0x4a004588,
+
+
+
+	/* cm2.ckgen */
+	.cm_clksel_mpu_m3_iss_root = 0x4a008100,
+	.cm_clksel_usb_60mhz = 0x4a008104,
+	.cm_scale_fclk = 0x4a008108,
+	.cm_core_dvfs_perf1 = 0x4a008110,
+	.cm_core_dvfs_perf2 = 0x4a008114,
+	.cm_core_dvfs_perf3 = 0x4a008118,
+	.cm_core_dvfs_perf4 = 0x4a00811c,
+	.cm_core_dvfs_current = 0x4a008124,
+	.cm_iva_dvfs_perf_tesla = 0x4a008128,
+	.cm_iva_dvfs_perf_ivahd = 0x4a00812c,
+	.cm_iva_dvfs_perf_abe = 0x4a008130,
+	.cm_iva_dvfs_current = 0x4a008138,
+	.cm_clkmode_dpll_per = 0x4a008140,
+	.cm_idlest_dpll_per = 0x4a008144,
+	.cm_autoidle_dpll_per = 0x4a008148,
+	.cm_clksel_dpll_per = 0x4a00814c,
+	.cm_div_m2_dpll_per = 0x4a008150,
+	.cm_div_m3_dpll_per = 0x4a008154,
+	.cm_div_h11_dpll_per = 0x4a008158,
+	.cm_div_h12_dpll_per = 0x4a00815c,
+	.cm_div_h13_dpll_per = 0x4a008160,
+	.cm_div_h14_dpll_per = 0x4a008164,
+	.cm_ssc_deltamstep_dpll_per = 0x4a008168,
+	.cm_ssc_modfreqdiv_dpll_per = 0x4a00816c,
+	.cm_emu_override_dpll_per = 0x4a008170,
+	.cm_clkmode_dpll_usb = 0x4a008180,
+	.cm_idlest_dpll_usb = 0x4a008184,
+	.cm_autoidle_dpll_usb = 0x4a008188,
+	.cm_clksel_dpll_usb = 0x4a00818c,
+	.cm_div_m2_dpll_usb = 0x4a008190,
+	.cm_ssc_deltamstep_dpll_usb = 0x4a0081a8,
+	.cm_ssc_modfreqdiv_dpll_usb = 0x4a0081ac,
+	.cm_clkdcoldo_dpll_usb = 0x4a0081b4,
+	.cm_clkmode_dpll_unipro = 0x4a0081c0,
+	.cm_idlest_dpll_unipro = 0x4a0081c4,
+	.cm_autoidle_dpll_unipro = 0x4a0081c8,
+	.cm_clksel_dpll_unipro = 0x4a0081cc,
+	.cm_div_m2_dpll_unipro = 0x4a0081d0,
+	.cm_ssc_deltamstep_dpll_unipro = 0x4a0081e8,
+	.cm_ssc_modfreqdiv_dpll_unipro = 0x4a0081ec,
+	.cm_coreaon_bandgap_clkctrl = 0x4a008648,
+	.cm_coreaon_io_srcomp_clkctrl = 0x4a008650,
+
+	/* cm2.core */
+	.cm_l3_1_clkstctrl = 0x4a008700,
+	.cm_l3_1_dynamicdep = 0x4a008708,
+	.cm_l3_1_l3_1_clkctrl = 0x4a008720,
+	.cm_l3_2_clkstctrl = 0x4a008800,
+	.cm_l3_2_dynamicdep = 0x4a008808,
+	.cm_l3_2_l3_2_clkctrl = 0x4a008820,
+	.cm_l3_gpmc_clkctrl = 0x4a008828,
+	.cm_l3_2_ocmc_ram_clkctrl = 0x4a008830,
+	.cm_mpu_m3_clkstctrl = 0x4a008900,
+	.cm_mpu_m3_staticdep = 0x4a008904,
+	.cm_mpu_m3_dynamicdep = 0x4a008908,
+	.cm_mpu_m3_mpu_m3_clkctrl = 0x4a008920,
+	.cm_sdma_clkstctrl = 0x4a008a00,
+	.cm_sdma_staticdep = 0x4a008a04,
+	.cm_sdma_dynamicdep = 0x4a008a08,
+	.cm_sdma_sdma_clkctrl = 0x4a008a20,
+	.cm_memif_clkstctrl = 0x4a008b00,
+	.cm_memif_dmm_clkctrl = 0x4a008b20,
+	.cm_memif_emif_fw_clkctrl = 0x4a008b28,
+	.cm_memif_emif_1_clkctrl = 0x4a008b30,
+	.cm_memif_emif_2_clkctrl = 0x4a008b38,
+	.cm_memif_dll_clkctrl = 0x4a008b40,
+	.cm_memif_emif_h1_clkctrl = 0x4a008b50,
+	.cm_memif_emif_h2_clkctrl = 0x4a008b58,
+	.cm_memif_dll_h_clkctrl = 0x4a008b60,
+	.cm_c2c_clkstctrl = 0x4a008c00,
+	.cm_c2c_staticdep = 0x4a008c04,
+	.cm_c2c_dynamicdep = 0x4a008c08,
+	.cm_c2c_sad2d_clkctrl = 0x4a008c20,
+	.cm_c2c_modem_icr_clkctrl = 0x4a008c28,
+	.cm_c2c_sad2d_fw_clkctrl = 0x4a008c30,
+	.cm_l4cfg_clkstctrl = 0x4a008d00,
+	.cm_l4cfg_dynamicdep = 0x4a008d08,
+	.cm_l4cfg_l4_cfg_clkctrl = 0x4a008d20,
+	.cm_l4cfg_hw_sem_clkctrl = 0x4a008d28,
+	.cm_l4cfg_mailbox_clkctrl = 0x4a008d30,
+	.cm_l4cfg_sar_rom_clkctrl = 0x4a008d38,
+	.cm_l3instr_clkstctrl = 0x4a008e00,
+	.cm_l3instr_l3_3_clkctrl = 0x4a008e20,
+	.cm_l3instr_l3_instr_clkctrl = 0x4a008e28,
+	.cm_l3instr_intrconn_wp1_clkctrl = 0x4a008e40,
+	.cm_l4per_clkstctrl = 0x4a009000,
+	.cm_l4per_dynamicdep = 0x4a009008,
+	.cm_l4per_adc_clkctrl = 0x4a009020,
+	.cm_l4per_gptimer10_clkctrl = 0x4a009028,
+	.cm_l4per_gptimer11_clkctrl = 0x4a009030,
+	.cm_l4per_gptimer2_clkctrl = 0x4a009038,
+	.cm_l4per_gptimer3_clkctrl = 0x4a009040,
+	.cm_l4per_gptimer4_clkctrl = 0x4a009048,
+	.cm_l4per_gptimer9_clkctrl = 0x4a009050,
+	.cm_l4per_elm_clkctrl = 0x4a009058,
+	.cm_l4per_gpio2_clkctrl = 0x4a009060,
+	.cm_l4per_gpio3_clkctrl = 0x4a009068,
+	.cm_l4per_gpio4_clkctrl = 0x4a009070,
+	.cm_l4per_gpio5_clkctrl = 0x4a009078,
+	.cm_l4per_gpio6_clkctrl = 0x4a009080,
+	.cm_l4per_hdq1w_clkctrl = 0x4a009088,
+	.cm_l4per_hecc1_clkctrl = 0x4a009090,
+	.cm_l4per_hecc2_clkctrl = 0x4a009098,
+	.cm_l4per_i2c1_clkctrl = 0x4a0090a0,
+	.cm_l4per_i2c2_clkctrl = 0x4a0090a8,
+	.cm_l4per_i2c3_clkctrl = 0x4a0090b0,
+	.cm_l4per_i2c4_clkctrl = 0x4a0090b8,
+	.cm_l4per_l4per_clkctrl = 0x4a0090c0,
+	.cm_l4per_mcasp2_clkctrl = 0x4a0090d0,
+	.cm_l4per_mcasp3_clkctrl = 0x4a0090d8,
+	.cm_l4per_mgate_clkctrl = 0x4a0090e8,
+	.cm_l4per_mcspi1_clkctrl = 0x4a0090f0,
+	.cm_l4per_mcspi2_clkctrl = 0x4a0090f8,
+	.cm_l4per_mcspi3_clkctrl = 0x4a009100,
+	.cm_l4per_mcspi4_clkctrl = 0x4a009108,
+	.cm_l4per_gpio7_clkctrl = 0x4a009110,
+	.cm_l4per_gpio8_clkctrl = 0x4a009118,
+	.cm_l4per_mmcsd3_clkctrl = 0x4a009120,
+	.cm_l4per_mmcsd4_clkctrl = 0x4a009128,
+	.cm_l4per_msprohg_clkctrl = 0x4a009130,
+	.cm_l4per_slimbus2_clkctrl = 0x4a009138,
+	.cm_l4per_uart1_clkctrl = 0x4a009140,
+	.cm_l4per_uart2_clkctrl = 0x4a009148,
+	.cm_l4per_uart3_clkctrl = 0x4a009150,
+	.cm_l4per_uart4_clkctrl = 0x4a009158,
+	.cm_l4per_mmcsd5_clkctrl = 0x4a009160,
+	.cm_l4per_i2c5_clkctrl = 0x4a009168,
+	.cm_l4per_uart5_clkctrl = 0x4a009170,
+	.cm_l4per_uart6_clkctrl = 0x4a009178,
+	.cm_l4sec_clkstctrl = 0x4a009180,
+	.cm_l4sec_staticdep = 0x4a009184,
+	.cm_l4sec_dynamicdep = 0x4a009188,
+	.cm_l4sec_aes1_clkctrl = 0x4a0091a0,
+	.cm_l4sec_aes2_clkctrl = 0x4a0091a8,
+	.cm_l4sec_des3des_clkctrl = 0x4a0091b0,
+	.cm_l4sec_pkaeip29_clkctrl = 0x4a0091b8,
+	.cm_l4sec_rng_clkctrl = 0x4a0091c0,
+	.cm_l4sec_sha2md51_clkctrl = 0x4a0091c8,
+	.cm_l4sec_cryptodma_clkctrl = 0x4a0091d8,
+
+	/* cm2.ivahd */
+	.cm_ivahd_clkstctrl = 0x4a009200,
+	.cm_ivahd_ivahd_clkctrl = 0x4a009220,
+	.cm_ivahd_sl2_clkctrl = 0x4a009228,
+
+	/* cm2.cam */
+	.cm_cam_clkstctrl = 0x4a009300,
+	.cm_cam_iss_clkctrl = 0x4a009320,
+	.cm_cam_fdif_clkctrl = 0x4a009328,
+
+	/* cm2.dss */
+	.cm_dss_clkstctrl = 0x4a009400,
+	.cm_dss_dss_clkctrl = 0x4a009420,
+
+	/* cm2.sgx */
+	.cm_sgx_clkstctrl = 0x4a009500,
+	.cm_sgx_sgx_clkctrl = 0x4a009520,
+
+	/* cm2.l3init */
+	.cm_l3init_clkstctrl = 0x4a009600,
+
+	/* cm2.l3init */
+	.cm_l3init_hsmmc1_clkctrl = 0x4a009628,
+	.cm_l3init_hsmmc2_clkctrl = 0x4a009630,
+	.cm_l3init_hsi_clkctrl = 0x4a009638,
+	.cm_l3init_hsusbhost_clkctrl = 0x4a009658,
+	.cm_l3init_hsusbotg_clkctrl = 0x4a009660,
+	.cm_l3init_hsusbtll_clkctrl = 0x4a009668,
+	.cm_l3init_p1500_clkctrl = 0x4a009678,
+	.cm_l3init_fsusb_clkctrl = 0x4a0096d0,
+	.cm_l3init_ocp2scp1_clkctrl = 0x4a0096e0,
+
+	/* l4 wkup regs */
+	.cm_abe_pll_ref_clksel = 0x4ae0610c,
+	.cm_sys_clksel = 0x4ae06110,
+	.cm_wkup_clkstctrl = 0x4ae07900,
+	.cm_wkup_l4wkup_clkctrl = 0x4ae07920,
+	.cm_wkup_wdtimer1_clkctrl = 0x4ae07928,
+	.cm_wkup_wdtimer2_clkctrl = 0x4ae07930,
+	.cm_wkup_gpio1_clkctrl = 0x4ae07938,
+	.cm_wkup_gptimer1_clkctrl = 0x4ae07940,
+	.cm_wkup_gptimer12_clkctrl = 0x4ae07948,
+	.cm_wkup_synctimer_clkctrl = 0x4ae07950,
+	.cm_wkup_usim_clkctrl = 0x4ae07958,
+	.cm_wkup_sarram_clkctrl = 0x4ae07960,
+	.cm_wkup_keyboard_clkctrl = 0x4ae07978,
+	.cm_wkup_rtc_clkctrl = 0x4ae07980,
+	.cm_wkup_bandgap_clkctrl = 0x4ae07988,
+	.cm_wkupaon_scrm_clkctrl = 0x4ae07990,
+	.cm_wkupaon_io_srcomp_clkctrl = 0x4ae07998,
+	.prm_rstctrl = 0x4ae07c00,
+	.prm_rstst = 0x4ae07c04,
+	.prm_vc_val_bypass = 0x4ae07ca0,
+	.prm_vc_cfg_i2c_mode = 0x4ae07cb4,
+	.prm_vc_cfg_i2c_clk = 0x4ae07cb8,
+
+	.prm_sldo_core_setup = 0x4ae07cc4,
+	.prm_sldo_core_ctrl = 0x4ae07cc8,
+	.prm_sldo_mpu_setup = 0x4ae07ccc,
+	.prm_sldo_mpu_ctrl = 0x4ae07cd0,
+	.prm_sldo_mm_setup = 0x4ae07cd4,
+	.prm_sldo_mm_ctrl = 0x4ae07cd8,
+};
+
+struct prcm_regs const dra7xx_prcm = {
+	/* cm1.ckgen */
+	.cm_clksel_core				= 0x4a005100,
+	.cm_clksel_abe				= 0x4a005108,
+	.cm_dll_ctrl				= 0x4a005110,
+	.cm_clkmode_dpll_core			= 0x4a005120,
+	.cm_idlest_dpll_core			= 0x4a005124,
+	.cm_autoidle_dpll_core			= 0x4a005128,
+	.cm_clksel_dpll_core			= 0x4a00512c,
+	.cm_div_m2_dpll_core			= 0x4a005130,
+	.cm_div_m3_dpll_core			= 0x4a005134,
+	.cm_div_h11_dpll_core			= 0x4a005138,
+	.cm_div_h12_dpll_core			= 0x4a00513c,
+	.cm_div_h13_dpll_core			= 0x4a005140,
+	.cm_div_h14_dpll_core			= 0x4a005144,
+	.cm_ssc_deltamstep_dpll_core		= 0x4a005148,
+	.cm_ssc_modfreqdiv_dpll_core		= 0x4a00514c,
+	.cm_div_h21_dpll_core			= 0x4a005150,
+	.cm_div_h22_dpllcore			= 0x4a005154,
+	.cm_div_h23_dpll_core			= 0x4a005158,
+	.cm_div_h24_dpll_core			= 0x4a00515c,
+	.cm_clkmode_dpll_mpu			= 0x4a005160,
+	.cm_idlest_dpll_mpu			= 0x4a005164,
+	.cm_autoidle_dpll_mpu			= 0x4a005168,
+	.cm_clksel_dpll_mpu			= 0x4a00516c,
+	.cm_div_m2_dpll_mpu			= 0x4a005170,
+	.cm_ssc_deltamstep_dpll_mpu		= 0x4a005188,
+	.cm_ssc_modfreqdiv_dpll_mpu		= 0x4a00518c,
+	.cm_bypclk_dpll_mpu			= 0x4a00519c,
+	.cm_clkmode_dpll_iva			= 0x4a0051a0,
+	.cm_idlest_dpll_iva			= 0x4a0051a4,
+	.cm_autoidle_dpll_iva			= 0x4a0051a8,
+	.cm_clksel_dpll_iva			= 0x4a0051ac,
+	.cm_ssc_deltamstep_dpll_iva		= 0x4a0051c8,
+	.cm_ssc_modfreqdiv_dpll_iva		= 0x4a0051cc,
+	.cm_bypclk_dpll_iva			= 0x4a0051dc,
+	.cm_clkmode_dpll_abe			= 0x4a0051e0,
+	.cm_idlest_dpll_abe			= 0x4a0051e4,
+	.cm_autoidle_dpll_abe			= 0x4a0051e8,
+	.cm_clksel_dpll_abe			= 0x4a0051ec,
+	.cm_div_m2_dpll_abe			= 0x4a0051f0,
+	.cm_div_m3_dpll_abe			= 0x4a0051f4,
+	.cm_ssc_deltamstep_dpll_abe		= 0x4a005208,
+	.cm_ssc_modfreqdiv_dpll_abe		= 0x4a00520c,
+	.cm_clkmode_dpll_ddrphy			= 0x4a005210,
+	.cm_idlest_dpll_ddrphy			= 0x4a005214,
+	.cm_autoidle_dpll_ddrphy		= 0x4a005218,
+	.cm_clksel_dpll_ddrphy			= 0x4a00521c,
+	.cm_div_m2_dpll_ddrphy			= 0x4a005220,
+	.cm_div_h11_dpll_ddrphy			= 0x4a005228,
+	.cm_ssc_deltamstep_dpll_ddrphy		= 0x4a00522c,
+	.cm_clkmode_dpll_dsp			= 0x4a005234,
+	.cm_shadow_freq_config1			= 0x4a005260,
+
+	/* cm1.mpu */
+	.cm_mpu_mpu_clkctrl			= 0x4a005320,
+
+	/* cm1.dsp */
+	.cm_dsp_clkstctrl			= 0x4a005400,
+	.cm_dsp_dsp_clkctrl			= 0x4a005420,
+
+	/* cm2.ckgen */
+	.cm_clksel_usb_60mhz			= 0x4a008104,
+	.cm_clkmode_dpll_per			= 0x4a008140,
+	.cm_idlest_dpll_per			= 0x4a008144,
+	.cm_autoidle_dpll_per			= 0x4a008148,
+	.cm_clksel_dpll_per			= 0x4a00814c,
+	.cm_div_m2_dpll_per			= 0x4a008150,
+	.cm_div_m3_dpll_per			= 0x4a008154,
+	.cm_div_h11_dpll_per			= 0x4a008158,
+	.cm_div_h12_dpll_per			= 0x4a00815c,
+	.cm_div_h13_dpll_per			= 0x4a008160,
+	.cm_div_h14_dpll_per			= 0x4a008164,
+	.cm_ssc_deltamstep_dpll_per		= 0x4a008168,
+	.cm_ssc_modfreqdiv_dpll_per		= 0x4a00816c,
+	.cm_clkmode_dpll_usb			= 0x4a008180,
+	.cm_idlest_dpll_usb			= 0x4a008184,
+	.cm_autoidle_dpll_usb			= 0x4a008188,
+	.cm_clksel_dpll_usb			= 0x4a00818c,
+	.cm_div_m2_dpll_usb			= 0x4a008190,
+	.cm_ssc_deltamstep_dpll_usb		= 0x4a0081a8,
+	.cm_ssc_modfreqdiv_dpll_usb		= 0x4a0081ac,
+	.cm_clkdcoldo_dpll_usb			= 0x4a0081b4,
+	.cm_clkmode_dpll_pcie_ref		= 0x4a008200,
+	.cm_clkmode_apll_pcie			= 0x4a00821c,
+	.cm_idlest_apll_pcie			= 0x4a008220,
+	.cm_div_m2_apll_pcie			= 0x4a008224,
+	.cm_clkvcoldo_apll_pcie			= 0x4a008228,
+
+	/* cm2.core */
+	.cm_l3_1_clkstctrl			= 0x4a008700,
+	.cm_l3_1_dynamicdep			= 0x4a008708,
+	.cm_l3_1_l3_1_clkctrl			= 0x4a008720,
+	.cm_l3_gpmc_clkctrl			= 0x4a008728,
+	.cm_mpu_m3_clkstctrl			= 0x4a008900,
+	.cm_mpu_m3_staticdep			= 0x4a008904,
+	.cm_mpu_m3_dynamicdep			= 0x4a008908,
+	.cm_mpu_m3_mpu_m3_clkctrl		= 0x4a008920,
+	.cm_sdma_clkstctrl			= 0x4a008a00,
+	.cm_sdma_staticdep			= 0x4a008a04,
+	.cm_sdma_dynamicdep			= 0x4a008a08,
+	.cm_sdma_sdma_clkctrl			= 0x4a008a20,
+	.cm_memif_clkstctrl			= 0x4a008b00,
+	.cm_memif_dmm_clkctrl			= 0x4a008b20,
+	.cm_memif_emif_fw_clkctrl		= 0x4a008b28,
+	.cm_memif_emif_1_clkctrl		= 0x4a008b30,
+	.cm_memif_emif_2_clkctrl		= 0x4a008b38,
+	.cm_memif_dll_clkctrl			= 0x4a008b40,
+	.cm_l4cfg_clkstctrl			= 0x4a008d00,
+	.cm_l4cfg_dynamicdep			= 0x4a008d08,
+	.cm_l4cfg_l4_cfg_clkctrl		= 0x4a008d20,
+	.cm_l4cfg_hw_sem_clkctrl		= 0x4a008d28,
+	.cm_l4cfg_mailbox_clkctrl		= 0x4a008d30,
+	.cm_l4cfg_sar_rom_clkctrl		= 0x4a008d38,
+	.cm_l3instr_clkstctrl			= 0x4a008e00,
+	.cm_l3instr_l3_3_clkctrl		= 0x4a008e20,
+	.cm_l3instr_l3_instr_clkctrl		= 0x4a008e28,
+	.cm_l3instr_intrconn_wp1_clkctrl	= 0x4a008e40,
+
+	/* cm2.ivahd */
+	.cm_ivahd_clkstctrl			= 0x4a008f00,
+	.cm_ivahd_ivahd_clkctrl			= 0x4a008f20,
+	.cm_ivahd_sl2_clkctrl			= 0x4a008f28,
+
+	/* cm2.cam */
+	.cm_cam_clkstctrl			= 0x4a009000,
+	.cm_cam_vip1_clkctrl			= 0x4a009020,
+	.cm_cam_vip2_clkctrl			= 0x4a009028,
+	.cm_cam_vip3_clkctrl			= 0x4a009030,
+	.cm_cam_lvdsrx_clkctrl			= 0x4a009038,
+	.cm_cam_csi1_clkctrl			= 0x4a009040,
+	.cm_cam_csi2_clkctrl			= 0x4a009048,
+
+	/* cm2.dss */
+	.cm_dss_clkstctrl			= 0x4a009100,
+	.cm_dss_dss_clkctrl			= 0x4a009120,
+
+	/* cm2.sgx */
+	.cm_sgx_clkstctrl			= 0x4a009200,
+	.cm_sgx_sgx_clkctrl			= 0x4a009220,
+
+	/* cm2.l3init */
+	.cm_l3init_clkstctrl			= 0x4a009300,
+
+	/* cm2.l3init */
+	.cm_l3init_hsmmc1_clkctrl		= 0x4a009328,
+	.cm_l3init_hsmmc2_clkctrl		= 0x4a009330,
+	.cm_l3init_hsusbhost_clkctrl		= 0x4a009340,
+	.cm_l3init_hsusbotg_clkctrl		= 0x4a009348,
+	.cm_l3init_hsusbtll_clkctrl		= 0x4a009350,
+	.cm_l3init_ocp2scp1_clkctrl		= 0x4a0093e0,
+
+	/* cm2.l4per */
+	.cm_l4per_clkstctrl			= 0x4a009700,
+	.cm_l4per_dynamicdep			= 0x4a009708,
+	.cm_l4per_gptimer10_clkctrl		= 0x4a009728,
+	.cm_l4per_gptimer11_clkctrl		= 0x4a009730,
+	.cm_l4per_gptimer2_clkctrl		= 0x4a009738,
+	.cm_l4per_gptimer3_clkctrl		= 0x4a009740,
+	.cm_l4per_gptimer4_clkctrl		= 0x4a009748,
+	.cm_l4per_gptimer9_clkctrl		= 0x4a009750,
+	.cm_l4per_elm_clkctrl			= 0x4a009758,
+	.cm_l4per_gpio2_clkctrl			= 0x4a009760,
+	.cm_l4per_gpio3_clkctrl			= 0x4a009768,
+	.cm_l4per_gpio4_clkctrl			= 0x4a009770,
+	.cm_l4per_gpio5_clkctrl			= 0x4a009778,
+	.cm_l4per_gpio6_clkctrl			= 0x4a009780,
+	.cm_l4per_hdq1w_clkctrl			= 0x4a009788,
+	.cm_l4per_i2c1_clkctrl			= 0x4a0097a0,
+	.cm_l4per_i2c2_clkctrl			= 0x4a0097a8,
+	.cm_l4per_i2c3_clkctrl			= 0x4a0097b0,
+	.cm_l4per_i2c4_clkctrl			= 0x4a0097b8,
+	.cm_l4per_l4per_clkctrl			= 0x4a0097c0,
+	.cm_l4per_mcspi1_clkctrl		= 0x4a0097f0,
+	.cm_l4per_mcspi2_clkctrl		= 0x4a0097f8,
+	.cm_l4per_mcspi3_clkctrl		= 0x4a009800,
+	.cm_l4per_mcspi4_clkctrl		= 0x4a009808,
+	.cm_l4per_gpio7_clkctrl			= 0x4a009810,
+	.cm_l4per_gpio8_clkctrl			= 0x4a009818,
+	.cm_l4per_mmcsd3_clkctrl		= 0x4a009820,
+	.cm_l4per_mmcsd4_clkctrl		= 0x4a009828,
+	.cm_l4per_uart1_clkctrl			= 0x4a009840,
+	.cm_l4per_uart2_clkctrl			= 0x4a009848,
+	.cm_l4per_uart3_clkctrl			= 0x4a009850,
+	.cm_l4per_uart4_clkctrl			= 0x4a009858,
+	.cm_l4per_uart5_clkctrl			= 0x4a009870,
+	.cm_l4sec_clkstctrl			= 0x4a009880,
+	.cm_l4sec_staticdep			= 0x4a009884,
+	.cm_l4sec_dynamicdep			= 0x4a009888,
+	.cm_l4sec_aes1_clkctrl			= 0x4a0098a0,
+	.cm_l4sec_aes2_clkctrl			= 0x4a0098a8,
+	.cm_l4sec_des3des_clkctrl		= 0x4a0098b0,
+	.cm_l4sec_rng_clkctrl			= 0x4a0098c0,
+	.cm_l4sec_sha2md51_clkctrl		= 0x4a0098c8,
+	.cm_l4sec_cryptodma_clkctrl		= 0x4a0098d8,
+
+	/* l4 wkup regs */
+	.cm_abe_pll_ref_clksel			= 0x4ae0610c,
+	.cm_sys_clksel				= 0x4ae06110,
+	.cm_wkup_clkstctrl			= 0x4ae07800,
+	.cm_wkup_l4wkup_clkctrl			= 0x4ae07820,
+	.cm_wkup_wdtimer1_clkctrl		= 0x4ae07828,
+	.cm_wkup_wdtimer2_clkctrl		= 0x4ae07830,
+	.cm_wkup_gpio1_clkctrl			= 0x4ae07838,
+	.cm_wkup_gptimer1_clkctrl		= 0x4ae07840,
+	.cm_wkup_gptimer12_clkctrl		= 0x4ae07848,
+	.cm_wkup_sarram_clkctrl			= 0x4ae07860,
+	.cm_wkup_keyboard_clkctrl		= 0x4ae07878,
+	.cm_wkupaon_scrm_clkctrl		= 0x4ae07890,
+	.prm_rstctrl				= 0x4ae07d00,
+	.prm_rstst				= 0x4ae07d04,
+	.prm_vc_val_bypass			= 0x4ae07da0,
+	.prm_vc_cfg_i2c_mode			= 0x4ae07db4,
+	.prm_vc_cfg_i2c_clk			= 0x4ae07db8,
+};
diff --git a/arch/arm/cpu/armv7/omap5/sdram.c b/arch/arm/cpu/armv7/omap5/sdram.c
index 6ebdf5f..6b461e4 100644
--- a/arch/arm/cpu/armv7/omap5/sdram.c
+++ b/arch/arm/cpu/armv7/omap5/sdram.c
@@ -67,6 +67,25 @@
 	.emif_ddr_ext_phy_ctrl_5	= 0x04010040
 };
 
+const struct emif_regs emif_regs_532_mhz_2cs_es2 = {
+	.sdram_config_init		= 0x80800EBA,
+	.sdram_config			= 0x808022BA,
+	.ref_ctrl			= 0x0000081A,
+	.sdram_tim1			= 0x772F6873,
+	.sdram_tim2			= 0x304a129a,
+	.sdram_tim3			= 0x02f7e45f,
+	.read_idle_ctrl			= 0x00050000,
+	.zq_config			= 0x100b3215,
+	.temp_alert_config		= 0x08000a05,
+	.emif_ddr_phy_ctlr_1_init	= 0x0E30400d,
+	.emif_ddr_phy_ctlr_1		= 0x0E30400d,
+	.emif_ddr_ext_phy_ctrl_1	= 0x04020080,
+	.emif_ddr_ext_phy_ctrl_2	= 0x28C518A3,
+	.emif_ddr_ext_phy_ctrl_3	= 0x518A3146,
+	.emif_ddr_ext_phy_ctrl_4	= 0x0014628C,
+	.emif_ddr_ext_phy_ctrl_5	= 0xC330CC33,
+};
+
 const struct emif_regs emif_regs_266_mhz_2cs = {
 	.sdram_config_init		= 0x80800EBA,
 	.sdram_config			= 0x808022BA,
@@ -109,13 +128,111 @@
 	.emif_rd_wr_exec_thresh		= 0x00000305
 };
 
+const struct emif_regs emif_regs_ddr3_532_mhz_1cs_es2 = {
+	.sdram_config_init              = 0x61851B32,
+	.sdram_config                   = 0x61851B32,
+	.ref_ctrl                       = 0x00001035,
+	.sdram_tim1                     = 0xCCCF36B3,
+	.sdram_tim2                     = 0x308F7FDA,
+	.sdram_tim3                     = 0x027F88A8,
+	.read_idle_ctrl                 = 0x00050000,
+	.zq_config                      = 0x1007190B,
+	.temp_alert_config              = 0x00000000,
+	.emif_ddr_phy_ctlr_1_init       = 0x0030400A,
+	.emif_ddr_phy_ctlr_1            = 0x0034400A,
+	.emif_ddr_ext_phy_ctrl_1        = 0x04040100,
+	.emif_ddr_ext_phy_ctrl_2        = 0x00000000,
+	.emif_ddr_ext_phy_ctrl_3        = 0x00000000,
+	.emif_ddr_ext_phy_ctrl_4        = 0x00000000,
+	.emif_ddr_ext_phy_ctrl_5        = 0x4350D435,
+	.emif_rd_wr_lvl_rmp_win         = 0x00000000,
+	.emif_rd_wr_lvl_rmp_ctl         = 0x80000000,
+	.emif_rd_wr_lvl_ctl             = 0x00000000,
+	.emif_rd_wr_exec_thresh         = 0x40000305
+};
+
 const struct dmm_lisa_map_regs lisa_map_4G_x_2_x_2 = {
 	.dmm_lisa_map_0 = 0x0,
 	.dmm_lisa_map_1 = 0x0,
 	.dmm_lisa_map_2 = 0x80740300,
-	.dmm_lisa_map_3 = 0xFF020100
+	.dmm_lisa_map_3 = 0xFF020100,
+	.is_ma_present	= 0x1
 };
 
+const struct dmm_lisa_map_regs lisa_map_512M_x_1 = {
+	.dmm_lisa_map_0 = 0x0,
+	.dmm_lisa_map_1 = 0x0,
+	.dmm_lisa_map_2 = 0x0,
+	.dmm_lisa_map_3 = 0x80500100,
+	.is_ma_present	= 0x1
+};
+
+static void emif_get_reg_dump_sdp(u32 emif_nr, const struct emif_regs **regs)
+{
+	switch (omap_revision()) {
+	case OMAP5430_ES1_0:
+		*regs = &emif_regs_532_mhz_2cs;
+		break;
+	case OMAP5432_ES1_0:
+		*regs = &emif_regs_ddr3_532_mhz_1cs;
+		break;
+	case OMAP5430_ES2_0:
+		*regs = &emif_regs_532_mhz_2cs_es2;
+		break;
+	case OMAP5432_ES2_0:
+	case DRA752_ES1_0:
+	default:
+		*regs = &emif_regs_ddr3_532_mhz_1cs_es2;
+	}
+}
+
+void emif_get_reg_dump(u32 emif_nr, const struct emif_regs **regs)
+	__attribute__((weak, alias("emif_get_reg_dump_sdp")));
+
+static void emif_get_dmm_regs_sdp(const struct dmm_lisa_map_regs
+						**dmm_lisa_regs)
+{
+	switch (omap_revision()) {
+	case OMAP5430_ES1_0:
+	case OMAP5430_ES2_0:
+	case OMAP5432_ES1_0:
+	case OMAP5432_ES2_0:
+		*dmm_lisa_regs = &lisa_map_4G_x_2_x_2;
+		break;
+	case DRA752_ES1_0:
+	default:
+		*dmm_lisa_regs = &lisa_map_512M_x_1;
+	}
+
+}
+
+void emif_get_dmm_regs(const struct dmm_lisa_map_regs **dmm_lisa_regs)
+	__attribute__((weak, alias("emif_get_dmm_regs_sdp")));
+#else
+
+static const struct lpddr2_device_details dev_4G_S4_details = {
+	.type		= LPDDR2_TYPE_S4,
+	.density	= LPDDR2_DENSITY_4Gb,
+	.io_width	= LPDDR2_IO_WIDTH_32,
+	.manufacturer	= LPDDR2_MANUFACTURER_SAMSUNG
+};
+
+static void emif_get_device_details_sdp(u32 emif_nr,
+		struct lpddr2_device_details *cs0_device_details,
+		struct lpddr2_device_details *cs1_device_details)
+{
+	/* EMIF1 & EMIF2 have identical configuration */
+	*cs0_device_details = dev_4G_S4_details;
+	*cs1_device_details = dev_4G_S4_details;
+}
+
+void emif_get_device_details(u32 emif_nr,
+		struct lpddr2_device_details *cs0_device_details,
+		struct lpddr2_device_details *cs1_device_details)
+	__attribute__((weak, alias("emif_get_device_details_sdp")));
+
+#endif /* CONFIG_SYS_EMIF_PRECALCULATED_TIMING_REGS */
+
 const u32 ext_phy_ctrl_const_base[EMIF_EXT_PHY_CTRL_CONST_REG] = {
 	0x01004010,
 	0x00001004,
@@ -138,7 +255,7 @@
 	0x00000077
 };
 
-const u32 ddr3_ext_phy_ctrl_const_base[EMIF_EXT_PHY_CTRL_CONST_REG] = {
+const u32 ddr3_ext_phy_ctrl_const_base_es1[EMIF_EXT_PHY_CTRL_CONST_REG] = {
 	0x01004010,
 	0x00001004,
 	0x04010040,
@@ -160,54 +277,64 @@
 	0x00000057
 };
 
-static void emif_get_reg_dump_sdp(u32 emif_nr, const struct emif_regs **regs)
-{
-	if (omap_revision() == OMAP5432_ES1_0)
-		*regs = &emif_regs_ddr3_532_mhz_1cs;
-	else
-		*regs = &emif_regs_532_mhz_2cs;
-}
-void emif_get_reg_dump(u32 emif_nr, const struct emif_regs **regs)
-	__attribute__((weak, alias("emif_get_reg_dump_sdp")));
-
-static void emif_get_dmm_regs_sdp(const struct dmm_lisa_map_regs
-						**dmm_lisa_regs)
-{
-	*dmm_lisa_regs = &lisa_map_4G_x_2_x_2;
-}
-
-void emif_get_dmm_regs(const struct dmm_lisa_map_regs **dmm_lisa_regs)
-	__attribute__((weak, alias("emif_get_dmm_regs_sdp")));
-
-#else
+const u32 ddr3_ext_phy_ctrl_const_base_es2[EMIF_EXT_PHY_CTRL_CONST_REG] = {
+	0x50D4350D,
+	0x00000D43,
+	0x04010040,
+	0x01004010,
+	0x00001004,
+	0x00000000,
+	0x00000000,
+	0x00000000,
+	0x80080080,
+	0x00800800,
+	0x08102040,
+	0x00000002,
+	0x00000000,
+	0x00000000,
+	0x00000000,
+	0x00000000,
+	0x00000000,
+	0x00000000,
+	0x00000057
+};
 
-static const struct lpddr2_device_details dev_4G_S4_details = {
-	.type		= LPDDR2_TYPE_S4,
-	.density	= LPDDR2_DENSITY_4Gb,
-	.io_width	= LPDDR2_IO_WIDTH_32,
-	.manufacturer	= LPDDR2_MANUFACTURER_SAMSUNG
+const struct lpddr2_mr_regs mr_regs = {
+	.mr1	= MR1_BL_8_BT_SEQ_WRAP_EN_NWR_8,
+	.mr2	= 0x6,
+	.mr3	= 0x1,
+	.mr10	= MR10_ZQ_ZQINIT,
+	.mr16	= MR16_REF_FULL_ARRAY
 };
 
-static void emif_get_device_details_sdp(u32 emif_nr,
-		struct lpddr2_device_details *cs0_device_details,
-		struct lpddr2_device_details *cs1_device_details)
+static void emif_get_ext_phy_ctrl_const_regs(const u32 **regs)
 {
-	/* EMIF1 & EMIF2 have identical configuration */
-	*cs0_device_details = dev_4G_S4_details;
-	*cs1_device_details = dev_4G_S4_details;
-}
+	switch (omap_revision()) {
+	case OMAP5430_ES1_0:
+	case OMAP5430_ES2_0:
+		*regs = ext_phy_ctrl_const_base;
+		break;
+	case OMAP5432_ES1_0:
+		*regs = ddr3_ext_phy_ctrl_const_base_es1;
+		break;
+	case OMAP5432_ES2_0:
+	case DRA752_ES1_0:
+	default:
+		*regs = ddr3_ext_phy_ctrl_const_base_es2;
 
-void emif_get_device_details(u32 emif_nr,
-		struct lpddr2_device_details *cs0_device_details,
-		struct lpddr2_device_details *cs1_device_details)
-	__attribute__((weak, alias("emif_get_device_details_sdp")));
+	}
+}
 
-#endif /* CONFIG_SYS_EMIF_PRECALCULATED_TIMING_REGS */
+void get_lpddr2_mr_regs(const struct lpddr2_mr_regs **regs)
+{
+	*regs = &mr_regs;
+}
 
 void do_ext_phy_settings(u32 base, const struct emif_regs *regs)
 {
 	u32 *ext_phy_ctrl_base = 0;
 	u32 *emif_ext_phy_ctrl_base = 0;
+	const u32 *ext_phy_ctrl_const_regs;
 	u32 i = 0;
 
 	struct emif_reg_struct *emif = (struct emif_reg_struct *)base;
@@ -226,12 +353,13 @@
 	 * external phy 6-24 registers do not change with
 	 * ddr frequency
 	 */
+	emif_get_ext_phy_ctrl_const_regs(&ext_phy_ctrl_const_regs);
 	for (i = 0; i < EMIF_EXT_PHY_CTRL_CONST_REG; i++) {
-		writel(ext_phy_ctrl_const_base[i],
-					emif_ext_phy_ctrl_base++);
+		writel(ext_phy_ctrl_const_regs[i],
+		       emif_ext_phy_ctrl_base++);
 		/* Update shadow registers */
-		writel(ext_phy_ctrl_const_base[i],
-					emif_ext_phy_ctrl_base++);
+		writel(ext_phy_ctrl_const_regs[i],
+		       emif_ext_phy_ctrl_base++);
 	}
 }
 
diff --git a/arch/arm/cpu/armv7/start.S b/arch/arm/cpu/armv7/start.S
index 141206e..fa5fad1 100644
--- a/arch/arm/cpu/armv7/start.S
+++ b/arch/arm/cpu/armv7/start.S
@@ -309,6 +309,25 @@
 	orr	r0, r0, #0x00001000	@ set bit 12 (I) I-cache
 #endif
 	mcr	p15, 0, r0, c1, c0, 0
+
+#ifdef CONFIG_ARM_ERRATA_742230
+	mrc	p15, 0, r0, c15, c0, 1	@ read diagnostic register
+	orr	r0, r0, #1 << 4		@ set bit #4
+	mcr	p15, 0, r0, c15, c0, 1	@ write diagnostic register
+#endif
+
+#ifdef CONFIG_ARM_ERRATA_743622
+	mrc	p15, 0, r0, c15, c0, 1	@ read diagnostic register
+	orr	r0, r0, #1 << 6		@ set bit #6
+	mcr	p15, 0, r0, c15, c0, 1	@ write diagnostic register
+#endif
+
+#ifdef CONFIG_ARM_ERRATA_751472
+	mrc	p15, 0, r0, c15, c0, 1	@ read diagnostic register
+	orr	r0, r0, #1 << 11	@ set bit #11
+	mcr	p15, 0, r0, c15, c0, 1	@ write diagnostic register
+#endif
+
 	mov	pc, lr			@ back to my caller
 ENDPROC(cpu_init_cp15)
 
diff --git a/arch/arm/cpu/armv7/tegra20/Makefile b/arch/arm/cpu/armv7/tegra20/Makefile
index 54ed8c4..c8a8504 100644
--- a/arch/arm/cpu/armv7/tegra20/Makefile
+++ b/arch/arm/cpu/armv7/tegra20/Makefile
@@ -27,7 +27,6 @@
 
 LIB	=  $(obj)lib$(SOC).o
 
-COBJS-$(CONFIG_USB_EHCI_TEGRA) += usb.o
 COBJS-$(CONFIG_PWM_TEGRA) += pwm.o
 COBJS-$(CONFIG_VIDEO_TEGRA) += display.o
 
diff --git a/arch/arm/cpu/armv7/tegra20/usb.c b/arch/arm/cpu/armv7/tegra20/usb.c
deleted file mode 100644
index 1bccf2b..0000000
--- a/arch/arm/cpu/armv7/tegra20/usb.c
+++ /dev/null
@@ -1,567 +0,0 @@
-/*
- * Copyright (c) 2011 The Chromium OS Authors.
- * (C) Copyright 2010,2011 NVIDIA Corporation <www.nvidia.com>
- *
- * See file CREDITS for list of people who contributed to this
- * project.
- *
- * This program is free software; you can redistribute it and/or
- * modify it under the terms of the GNU General Public License as
- * published by the Free Software Foundation; either version 2 of
- * the License, or (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
- * MA 02111-1307 USA
- */
-
-#include <common.h>
-#include <asm/io.h>
-#include <asm-generic/gpio.h>
-#include <asm/arch/clock.h>
-#include <asm/arch/gpio.h>
-#include <asm/arch/pinmux.h>
-#include <asm/arch/tegra.h>
-#include <asm/arch/usb.h>
-#include <usb/ulpi.h>
-#include <asm/arch-tegra/clk_rst.h>
-#include <asm/arch-tegra/sys_proto.h>
-#include <asm/arch-tegra/uart.h>
-#include <libfdt.h>
-#include <fdtdec.h>
-
-#ifdef CONFIG_USB_ULPI
-	#ifndef CONFIG_USB_ULPI_VIEWPORT
-	#error	"To use CONFIG_USB_ULPI on Tegra Boards you have to also \
-			define CONFIG_USB_ULPI_VIEWPORT"
-	#endif
-#endif
-
-enum {
-	USB_PORTS_MAX	= 4,			/* Maximum ports we allow */
-};
-
-/* Parameters we need for USB */
-enum {
-	PARAM_DIVN,                     /* PLL FEEDBACK DIVIDer */
-	PARAM_DIVM,                     /* PLL INPUT DIVIDER */
-	PARAM_DIVP,                     /* POST DIVIDER (2^N) */
-	PARAM_CPCON,                    /* BASE PLLC CHARGE Pump setup ctrl */
-	PARAM_LFCON,                    /* BASE PLLC LOOP FILter setup ctrl */
-	PARAM_ENABLE_DELAY_COUNT,       /* PLL-U Enable Delay Count */
-	PARAM_STABLE_COUNT,             /* PLL-U STABLE count */
-	PARAM_ACTIVE_DELAY_COUNT,       /* PLL-U Active delay count */
-	PARAM_XTAL_FREQ_COUNT,          /* PLL-U XTAL frequency count */
-	PARAM_DEBOUNCE_A_TIME,          /* 10MS DELAY for BIAS_DEBOUNCE_A */
-	PARAM_BIAS_TIME,                /* 20US DELAY AFter bias cell op */
-
-	PARAM_COUNT
-};
-
-/* Possible port types (dual role mode) */
-enum dr_mode {
-	DR_MODE_NONE = 0,
-	DR_MODE_HOST,		/* supports host operation */
-	DR_MODE_DEVICE,		/* supports device operation */
-	DR_MODE_OTG,		/* supports both */
-};
-
-/* Information about a USB port */
-struct fdt_usb {
-	struct usb_ctlr *reg;	/* address of registers in physical memory */
-	unsigned utmi:1;	/* 1 if port has external tranceiver, else 0 */
-	unsigned ulpi:1;	/* 1 if port has external ULPI transceiver */
-	unsigned enabled:1;	/* 1 to enable, 0 to disable */
-	unsigned has_legacy_mode:1; /* 1 if this port has legacy mode */
-	enum dr_mode dr_mode;	/* dual role mode */
-	enum periph_id periph_id;/* peripheral id */
-	struct fdt_gpio_state vbus_gpio;	/* GPIO for vbus enable */
-	struct fdt_gpio_state phy_reset_gpio; /* GPIO to reset ULPI phy */
-};
-
-static struct fdt_usb port[USB_PORTS_MAX];	/* List of valid USB ports */
-static unsigned port_count;			/* Number of available ports */
-
-/*
- * This table has USB timing parameters for each Oscillator frequency we
- * support. There are four sets of values:
- *
- * 1. PLLU configuration information (reference clock is osc/clk_m and
- * PLLU-FOs are fixed at 12MHz/60MHz/480MHz).
- *
- *  Reference frequency     13.0MHz      19.2MHz      12.0MHz      26.0MHz
- *  ----------------------------------------------------------------------
- *      DIVN                960 (0x3c0)  200 (0c8)    960 (3c0h)   960 (3c0)
- *      DIVM                13 (0d)      4 (04)       12 (0c)      26 (1a)
- * Filter frequency (MHz)   1            4.8          6            2
- * CPCON                    1100b        0011b        1100b        1100b
- * LFCON0                   0            0            0            0
- *
- * 2. PLL CONFIGURATION & PARAMETERS for different clock generators:
- *
- * Reference frequency     13.0MHz         19.2MHz         12.0MHz     26.0MHz
- * ---------------------------------------------------------------------------
- * PLLU_ENABLE_DLY_COUNT   02 (0x02)       03 (03)         02 (02)     04 (04)
- * PLLU_STABLE_COUNT       51 (33)         75 (4B)         47 (2F)    102 (66)
- * PLL_ACTIVE_DLY_COUNT    05 (05)         06 (06)         04 (04)     09 (09)
- * XTAL_FREQ_COUNT        127 (7F)        187 (BB)        118 (76)    254 (FE)
- *
- * 3. Debounce values IdDig, Avalid, Bvalid, VbusValid, VbusWakeUp, and
- * SessEnd. Each of these signals have their own debouncer and for each of
- * those one out of two debouncing times can be chosen (BIAS_DEBOUNCE_A or
- * BIAS_DEBOUNCE_B).
- *
- * The values of DEBOUNCE_A and DEBOUNCE_B are calculated as follows:
- *    0xffff -> No debouncing at all
- *    <n> ms = <n> *1000 / (1/19.2MHz) / 4
- *
- * So to program a 1 ms debounce for BIAS_DEBOUNCE_A, we have:
- * BIAS_DEBOUNCE_A[15:0] = 1000 * 19.2 / 4  = 4800 = 0x12c0
- *
- * We need to use only DebounceA for BOOTROM. We don't need the DebounceB
- * values, so we can keep those to default.
- *
- * 4. The 20 microsecond delay after bias cell operation.
- */
-static const unsigned usb_pll[CLOCK_OSC_FREQ_COUNT][PARAM_COUNT] = {
-	/* DivN, DivM, DivP, CPCON, LFCON, Delays             Debounce, Bias */
-	{ 0x3C0, 0x0D, 0x00, 0xC,   0,  0x02, 0x33, 0x05, 0x7F, 0x7EF4, 5 },
-	{ 0x0C8, 0x04, 0x00, 0x3,   0,  0x03, 0x4B, 0x06, 0xBB, 0xBB80, 7 },
-	{ 0x3C0, 0x0C, 0x00, 0xC,   0,  0x02, 0x2F, 0x04, 0x76, 0x7530, 5 },
-	{ 0x3C0, 0x1A, 0x00, 0xC,   0,  0x04, 0x66, 0x09, 0xFE, 0xFDE8, 9 }
-};
-
-/* UTMIP Idle Wait Delay */
-static const u8 utmip_idle_wait_delay = 17;
-
-/* UTMIP Elastic limit */
-static const u8 utmip_elastic_limit = 16;
-
-/* UTMIP High Speed Sync Start Delay */
-static const u8 utmip_hs_sync_start_delay = 9;
-
-/* Put the port into host mode */
-static void set_host_mode(struct fdt_usb *config)
-{
-	/*
-	 * If we are an OTG port, check if remote host is driving VBus and
-	 * bail out in this case.
-	 */
-	if (config->dr_mode == DR_MODE_OTG &&
-		(readl(&config->reg->phy_vbus_sensors) & VBUS_VLD_STS))
-		return;
-
-	/*
-	 * If not driving, we set the GPIO to enable VBUS. We assume
-	 * that the pinmux is set up correctly for this.
-	 */
-	if (fdt_gpio_isvalid(&config->vbus_gpio)) {
-		fdtdec_setup_gpio(&config->vbus_gpio);
-		gpio_direction_output(config->vbus_gpio.gpio,
-			(config->vbus_gpio.flags & FDT_GPIO_ACTIVE_LOW) ?
-				 0 : 1);
-		debug("set_host_mode: GPIO %d %s\n", config->vbus_gpio.gpio,
-			(config->vbus_gpio.flags & FDT_GPIO_ACTIVE_LOW) ?
-				"low" : "high");
-	}
-}
-
-void usbf_reset_controller(struct fdt_usb *config, struct usb_ctlr *usbctlr)
-{
-	/* Reset the USB controller with 2us delay */
-	reset_periph(config->periph_id, 2);
-
-	/*
-	 * Set USB1_NO_LEGACY_MODE to 1, Registers are accessible under
-	 * base address
-	 */
-	if (config->has_legacy_mode)
-		setbits_le32(&usbctlr->usb1_legacy_ctrl, USB1_NO_LEGACY_MODE);
-
-	/* Put UTMIP1/3 in reset */
-	setbits_le32(&usbctlr->susp_ctrl, UTMIP_RESET);
-
-	/* Enable the UTMIP PHY */
-	if (config->utmi)
-		setbits_le32(&usbctlr->susp_ctrl, UTMIP_PHY_ENB);
-
-	/*
-	 * TODO: where do we take the USB1 out of reset? The old code would
-	 * take USB3 out of reset, but not USB1. This code doesn't do either.
-	 */
-}
-
-/* set up the UTMI USB controller with the parameters provided */
-static int init_utmi_usb_controller(struct fdt_usb *config,
-				struct usb_ctlr *usbctlr, const u32 timing[])
-{
-	u32 val;
-	int loop_count;
-
-	clock_enable(config->periph_id);
-
-	/* Reset the usb controller */
-	usbf_reset_controller(config, usbctlr);
-
-	/* Stop crystal clock by setting UTMIP_PHY_XTAL_CLOCKEN low */
-	clrbits_le32(&usbctlr->utmip_misc_cfg1, UTMIP_PHY_XTAL_CLOCKEN);
-
-	/* Follow the crystal clock disable by >100ns delay */
-	udelay(1);
-
-	/*
-	 * To Use the A Session Valid for cable detection logic, VBUS_WAKEUP
-	 * mux must be switched to actually use a_sess_vld threshold.
-	 */
-	if (fdt_gpio_isvalid(&config->vbus_gpio)) {
-		clrsetbits_le32(&usbctlr->usb1_legacy_ctrl,
-			VBUS_SENSE_CTL_MASK,
-			VBUS_SENSE_CTL_A_SESS_VLD << VBUS_SENSE_CTL_SHIFT);
-	}
-
-	/*
-	 * PLL Delay CONFIGURATION settings. The following parameters control
-	 * the bring up of the plls.
-	 */
-	val = readl(&usbctlr->utmip_misc_cfg1);
-	clrsetbits_le32(&val, UTMIP_PLLU_STABLE_COUNT_MASK,
-		timing[PARAM_STABLE_COUNT] << UTMIP_PLLU_STABLE_COUNT_SHIFT);
-	clrsetbits_le32(&val, UTMIP_PLL_ACTIVE_DLY_COUNT_MASK,
-		timing[PARAM_ACTIVE_DELAY_COUNT] <<
-			UTMIP_PLL_ACTIVE_DLY_COUNT_SHIFT);
-	writel(val, &usbctlr->utmip_misc_cfg1);
-
-	/* Set PLL enable delay count and crystal frequency count */
-	val = readl(&usbctlr->utmip_pll_cfg1);
-	clrsetbits_le32(&val, UTMIP_PLLU_ENABLE_DLY_COUNT_MASK,
-		timing[PARAM_ENABLE_DELAY_COUNT] <<
-			UTMIP_PLLU_ENABLE_DLY_COUNT_SHIFT);
-	clrsetbits_le32(&val, UTMIP_XTAL_FREQ_COUNT_MASK,
-		timing[PARAM_XTAL_FREQ_COUNT] <<
-			UTMIP_XTAL_FREQ_COUNT_SHIFT);
-	writel(val, &usbctlr->utmip_pll_cfg1);
-
-	/* Setting the tracking length time */
-	clrsetbits_le32(&usbctlr->utmip_bias_cfg1,
-		UTMIP_BIAS_PDTRK_COUNT_MASK,
-		timing[PARAM_BIAS_TIME] << UTMIP_BIAS_PDTRK_COUNT_SHIFT);
-
-	/* Program debounce time for VBUS to become valid */
-	clrsetbits_le32(&usbctlr->utmip_debounce_cfg0,
-		UTMIP_DEBOUNCE_CFG0_MASK,
-		timing[PARAM_DEBOUNCE_A_TIME] << UTMIP_DEBOUNCE_CFG0_SHIFT);
-
-	setbits_le32(&usbctlr->utmip_tx_cfg0, UTMIP_FS_PREAMBLE_J);
-
-	/* Disable battery charge enabling bit */
-	setbits_le32(&usbctlr->utmip_bat_chrg_cfg0, UTMIP_PD_CHRG);
-
-	clrbits_le32(&usbctlr->utmip_xcvr_cfg0, UTMIP_XCVR_LSBIAS_SE);
-	setbits_le32(&usbctlr->utmip_spare_cfg0, FUSE_SETUP_SEL);
-
-	/*
-	 * Configure the UTMIP_IDLE_WAIT and UTMIP_ELASTIC_LIMIT
-	 * Setting these fields, together with default values of the
-	 * other fields, results in programming the registers below as
-	 * follows:
-	 *         UTMIP_HSRX_CFG0 = 0x9168c000
-	 *         UTMIP_HSRX_CFG1 = 0x13
-	 */
-
-	/* Set PLL enable delay count and Crystal frequency count */
-	val = readl(&usbctlr->utmip_hsrx_cfg0);
-	clrsetbits_le32(&val, UTMIP_IDLE_WAIT_MASK,
-		utmip_idle_wait_delay << UTMIP_IDLE_WAIT_SHIFT);
-	clrsetbits_le32(&val, UTMIP_ELASTIC_LIMIT_MASK,
-		utmip_elastic_limit << UTMIP_ELASTIC_LIMIT_SHIFT);
-	writel(val, &usbctlr->utmip_hsrx_cfg0);
-
-	/* Configure the UTMIP_HS_SYNC_START_DLY */
-	clrsetbits_le32(&usbctlr->utmip_hsrx_cfg1,
-		UTMIP_HS_SYNC_START_DLY_MASK,
-		utmip_hs_sync_start_delay << UTMIP_HS_SYNC_START_DLY_SHIFT);
-
-	/* Preceed the crystal clock disable by >100ns delay. */
-	udelay(1);
-
-	/* Resuscitate crystal clock by setting UTMIP_PHY_XTAL_CLOCKEN */
-	setbits_le32(&usbctlr->utmip_misc_cfg1, UTMIP_PHY_XTAL_CLOCKEN);
-
-	/* Finished the per-controller init. */
-
-	/* De-assert UTMIP_RESET to bring out of reset. */
-	clrbits_le32(&usbctlr->susp_ctrl, UTMIP_RESET);
-
-	/* Wait for the phy clock to become valid in 100 ms */
-	for (loop_count = 100000; loop_count != 0; loop_count--) {
-		if (readl(&usbctlr->susp_ctrl) & USB_PHY_CLK_VALID)
-			break;
-		udelay(1);
-	}
-	if (!loop_count)
-		return -1;
-
-	/* Disable ICUSB FS/LS transceiver */
-	clrbits_le32(&usbctlr->icusb_ctrl, IC_ENB1);
-
-	/* Select UTMI parallel interface */
-	clrsetbits_le32(&usbctlr->port_sc1, PTS_MASK,
-			PTS_UTMI << PTS_SHIFT);
-	clrbits_le32(&usbctlr->port_sc1, STS);
-
-	/* Deassert power down state */
-	clrbits_le32(&usbctlr->utmip_xcvr_cfg0, UTMIP_FORCE_PD_POWERDOWN |
-		UTMIP_FORCE_PD2_POWERDOWN | UTMIP_FORCE_PDZI_POWERDOWN);
-	clrbits_le32(&usbctlr->utmip_xcvr_cfg1, UTMIP_FORCE_PDDISC_POWERDOWN |
-		UTMIP_FORCE_PDCHRP_POWERDOWN | UTMIP_FORCE_PDDR_POWERDOWN);
-
-	return 0;
-}
-
-#ifdef CONFIG_USB_ULPI
-/* if board file does not set a ULPI reference frequency we default to 24MHz */
-#ifndef CONFIG_ULPI_REF_CLK
-#define CONFIG_ULPI_REF_CLK 24000000
-#endif
-
-/* set up the ULPI USB controller with the parameters provided */
-static int init_ulpi_usb_controller(struct fdt_usb *config,
-				struct usb_ctlr *usbctlr)
-{
-	u32 val;
-	int loop_count;
-	struct ulpi_viewport ulpi_vp;
-
-	/* set up ULPI reference clock on pllp_out4 */
-	clock_enable(PERIPH_ID_DEV2_OUT);
-	clock_set_pllout(CLOCK_ID_PERIPH, PLL_OUT4, CONFIG_ULPI_REF_CLK);
-
-	/* reset ULPI phy */
-	if (fdt_gpio_isvalid(&config->phy_reset_gpio)) {
-		fdtdec_setup_gpio(&config->phy_reset_gpio);
-		gpio_direction_output(config->phy_reset_gpio.gpio, 0);
-		mdelay(5);
-		gpio_set_value(config->phy_reset_gpio.gpio, 1);
-	}
-
-	/* Reset the usb controller */
-	clock_enable(config->periph_id);
-	usbf_reset_controller(config, usbctlr);
-
-	/* enable pinmux bypass */
-	setbits_le32(&usbctlr->ulpi_timing_ctrl_0,
-			ULPI_CLKOUT_PINMUX_BYP | ULPI_OUTPUT_PINMUX_BYP);
-
-	/* Select ULPI parallel interface */
-	clrsetbits_le32(&usbctlr->port_sc1, PTS_MASK, PTS_ULPI << PTS_SHIFT);
-
-	/* enable ULPI transceiver */
-	setbits_le32(&usbctlr->susp_ctrl, ULPI_PHY_ENB);
-
-	/* configure ULPI transceiver timings */
-	val = 0;
-	writel(val, &usbctlr->ulpi_timing_ctrl_1);
-
-	val |= ULPI_DATA_TRIMMER_SEL(4);
-	val |= ULPI_STPDIRNXT_TRIMMER_SEL(4);
-	val |= ULPI_DIR_TRIMMER_SEL(4);
-	writel(val, &usbctlr->ulpi_timing_ctrl_1);
-	udelay(10);
-
-	val |= ULPI_DATA_TRIMMER_LOAD;
-	val |= ULPI_STPDIRNXT_TRIMMER_LOAD;
-	val |= ULPI_DIR_TRIMMER_LOAD;
-	writel(val, &usbctlr->ulpi_timing_ctrl_1);
-
-	/* set up phy for host operation with external vbus supply */
-	ulpi_vp.port_num = 0;
-	ulpi_vp.viewport_addr = (u32)&usbctlr->ulpi_viewport;
-
-	if (ulpi_init(&ulpi_vp)) {
-		printf("Tegra ULPI viewport init failed\n");
-		return -1;
-	}
-
-	ulpi_set_vbus(&ulpi_vp, 1, 1);
-	ulpi_set_vbus_indicator(&ulpi_vp, 1, 1, 0);
-
-	/* enable wakeup events */
-	setbits_le32(&usbctlr->port_sc1, WKCN | WKDS | WKOC);
-
-	/* Enable and wait for the phy clock to become valid in 100 ms */
-	setbits_le32(&usbctlr->susp_ctrl, USB_SUSP_CLR);
-	for (loop_count = 100000; loop_count != 0; loop_count--) {
-		if (readl(&usbctlr->susp_ctrl) & USB_PHY_CLK_VALID)
-			break;
-		udelay(1);
-	}
-	if (!loop_count)
-		return -1;
-	clrbits_le32(&usbctlr->susp_ctrl, USB_SUSP_CLR);
-
-	return 0;
-}
-#else
-static int init_ulpi_usb_controller(struct fdt_usb *config,
-				struct usb_ctlr *usbctlr)
-{
-	printf("No code to set up ULPI controller, please enable"
-			"CONFIG_USB_ULPI and CONFIG_USB_ULPI_VIEWPORT");
-	return -1;
-}
-#endif
-
-static void config_clock(const u32 timing[])
-{
-	clock_start_pll(CLOCK_ID_USB,
-		timing[PARAM_DIVM], timing[PARAM_DIVN], timing[PARAM_DIVP],
-		timing[PARAM_CPCON], timing[PARAM_LFCON]);
-}
-
-/**
- * Add a new USB port to the list of available ports.
- *
- * @param config	USB port configuration
- * @return 0 if ok, -1 if error (too many ports)
- */
-static int add_port(struct fdt_usb *config, const u32 timing[])
-{
-	struct usb_ctlr *usbctlr = config->reg;
-
-	if (port_count == USB_PORTS_MAX) {
-		printf("tegrausb: Cannot register more than %d ports\n",
-		      USB_PORTS_MAX);
-		return -1;
-	}
-
-	if (config->utmi && init_utmi_usb_controller(config, usbctlr, timing)) {
-		printf("tegrausb: Cannot init port\n");
-		return -1;
-	}
-
-	if (config->ulpi && init_ulpi_usb_controller(config, usbctlr)) {
-		printf("tegrausb: Cannot init port\n");
-		return -1;
-	}
-
-	port[port_count++] = *config;
-
-	return 0;
-}
-
-int tegrausb_start_port(int portnum, u32 *hccr, u32 *hcor)
-{
-	struct usb_ctlr *usbctlr;
-
-	if (portnum >= port_count)
-		return -1;
-	set_host_mode(&port[portnum]);
-
-	usbctlr = port[portnum].reg;
-	*hccr = (u32)&usbctlr->cap_length;
-	*hcor = (u32)&usbctlr->usb_cmd;
-	return 0;
-}
-
-int tegrausb_stop_port(int portnum)
-{
-	struct usb_ctlr *usbctlr;
-
-	usbctlr = port[portnum].reg;
-
-	/* Stop controller */
-	writel(0, &usbctlr->usb_cmd);
-	udelay(1000);
-
-	/* Initiate controller reset */
-	writel(2, &usbctlr->usb_cmd);
-	udelay(1000);
-
-	return 0;
-}
-
-int fdt_decode_usb(const void *blob, int node, unsigned osc_frequency_mhz,
-		   struct fdt_usb *config)
-{
-	const char *phy, *mode;
-
-	config->reg = (struct usb_ctlr *)fdtdec_get_addr(blob, node, "reg");
-	mode = fdt_getprop(blob, node, "dr_mode", NULL);
-	if (mode) {
-		if (0 == strcmp(mode, "host"))
-			config->dr_mode = DR_MODE_HOST;
-		else if (0 == strcmp(mode, "peripheral"))
-			config->dr_mode = DR_MODE_DEVICE;
-		else if (0 == strcmp(mode, "otg"))
-			config->dr_mode = DR_MODE_OTG;
-		else {
-			debug("%s: Cannot decode dr_mode '%s'\n", __func__,
-			      mode);
-			return -FDT_ERR_NOTFOUND;
-		}
-	} else {
-		config->dr_mode = DR_MODE_HOST;
-	}
-
-	phy = fdt_getprop(blob, node, "phy_type", NULL);
-	config->utmi = phy && 0 == strcmp("utmi", phy);
-	config->ulpi = phy && 0 == strcmp("ulpi", phy);
-	config->enabled = fdtdec_get_is_enabled(blob, node);
-	config->has_legacy_mode = fdtdec_get_bool(blob, node,
-						  "nvidia,has-legacy-mode");
-	config->periph_id = clock_decode_periph_id(blob, node);
-	if (config->periph_id == PERIPH_ID_NONE) {
-		debug("%s: Missing/invalid peripheral ID\n", __func__);
-		return -FDT_ERR_NOTFOUND;
-	}
-	fdtdec_decode_gpio(blob, node, "nvidia,vbus-gpio", &config->vbus_gpio);
-	fdtdec_decode_gpio(blob, node, "nvidia,phy-reset-gpio",
-			&config->phy_reset_gpio);
-	debug("enabled=%d, legacy_mode=%d, utmi=%d, ulpi=%d, periph_id=%d, "
-		"vbus=%d, phy_reset=%d, dr_mode=%d\n",
-		config->enabled, config->has_legacy_mode, config->utmi,
-		config->ulpi, config->periph_id, config->vbus_gpio.gpio,
-		config->phy_reset_gpio.gpio, config->dr_mode);
-
-	return 0;
-}
-
-int board_usb_init(const void *blob)
-{
-	struct fdt_usb config;
-	unsigned osc_freq = clock_get_rate(CLOCK_ID_OSC);
-	enum clock_osc_freq freq;
-	int node_list[USB_PORTS_MAX];
-	int node, count, i;
-
-	/* Set up the USB clocks correctly based on our oscillator frequency */
-	freq = clock_get_osc_freq();
-	config_clock(usb_pll[freq]);
-
-	/* count may return <0 on error */
-	count = fdtdec_find_aliases_for_id(blob, "usb",
-			COMPAT_NVIDIA_TEGRA20_USB, node_list, USB_PORTS_MAX);
-	for (i = 0; i < count; i++) {
-		debug("USB %d: ", i);
-		node = node_list[i];
-		if (!node)
-			continue;
-		if (fdt_decode_usb(blob, node, osc_freq, &config)) {
-			debug("Cannot decode USB node %s\n",
-			      fdt_get_name(blob, node, NULL));
-			return -1;
-		}
-
-		if (add_port(&config, usb_pll[freq]))
-			return -1;
-		set_host_mode(&config);
-	}
-
-	return 0;
-}
diff --git a/arch/arm/cpu/armv7/zynq/Makefile b/arch/arm/cpu/armv7/zynq/Makefile
index 499ace4..388085d 100644
--- a/arch/arm/cpu/armv7/zynq/Makefile
+++ b/arch/arm/cpu/armv7/zynq/Makefile
@@ -30,6 +30,7 @@
 
 COBJS-y	:= timer.o
 COBJS-y	+= cpu.o
+COBJS-y	+= slcr.o
 
 COBJS	:= $(COBJS-y)
 
diff --git a/arch/arm/cpu/armv7/zynq/cpu.c b/arch/arm/cpu/armv7/zynq/cpu.c
index ab615cc..e8f4c19 100644
--- a/arch/arm/cpu/armv7/zynq/cpu.c
+++ b/arch/arm/cpu/armv7/zynq/cpu.c
@@ -21,11 +21,37 @@
  * MA 02111-1307 USA
  */
 #include <common.h>
+#include <asm/io.h>
+#include <asm/arch/sys_proto.h>
+#include <asm/arch/hardware.h>
 
-inline void lowlevel_init(void) {}
+void lowlevel_init(void)
+{
+	zynq_slcr_unlock();
+	/* remap DDR to zero, FILTERSTART */
+	writel(0, &scu_base->filter_start);
+
+	/* Device config APB, unlock the PCAP */
+	writel(0x757BDF0D, &devcfg_base->unlock);
+	writel(0xFFFFFFFF, &devcfg_base->rom_shadow);
+
+	/* OCM_CFG, Mask out the ROM, map ram into upper addresses */
+	writel(0x1F, &slcr_base->ocm_cfg);
+	/* FPGA_RST_CTRL, clear resets on AXI fabric ports */
+	writel(0x0, &slcr_base->fpga_rst_ctrl);
+	/* TZ_DDR_RAM, Set DDR trust zone non-secure */
+	writel(0xFFFFFFFF, &slcr_base->trust_zone);
+	/* Set urgent bits with register */
+	writel(0x0, &slcr_base->ddr_urgent_sel);
+	/* Urgent write, ports S2/S3 */
+	writel(0xC, &slcr_base->ddr_urgent);
+
+	zynq_slcr_lock();
+}
 
 void reset_cpu(ulong addr)
 {
+	zynq_slcr_cpu_reset();
 	while (1)
 		;
 }
diff --git a/arch/arm/cpu/armv7/zynq/slcr.c b/arch/arm/cpu/armv7/zynq/slcr.c
new file mode 100644
index 0000000..788a8fd
--- /dev/null
+++ b/arch/arm/cpu/armv7/zynq/slcr.c
@@ -0,0 +1,63 @@
+/*
+ * Copyright (c) 2013 Xilinx Inc.
+ *
+ * See file CREDITS for list of people who contributed to this
+ * project.
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of
+ * the License, or (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
+ * MA 02111-1307 USA
+ */
+
+#include <common.h>
+#include <asm/io.h>
+#include <malloc.h>
+#include <asm/arch/hardware.h>
+
+#define SLCR_LOCK_MAGIC		0x767B
+#define SLCR_UNLOCK_MAGIC	0xDF0D
+
+static int slcr_lock = 1; /* 1 means locked, 0 means unlocked */
+
+void zynq_slcr_lock(void)
+{
+	if (!slcr_lock)
+		writel(SLCR_LOCK_MAGIC, &slcr_base->slcr_lock);
+}
+
+void zynq_slcr_unlock(void)
+{
+	if (slcr_lock)
+		writel(SLCR_UNLOCK_MAGIC, &slcr_base->slcr_unlock);
+}
+
+/* Reset the entire system */
+void zynq_slcr_cpu_reset(void)
+{
+	/*
+	 * Unlock the SLCR then reset the system.
+	 * Note that this seems to require raw i/o
+	 * functions or there's a lockup?
+	 */
+	zynq_slcr_unlock();
+
+	/*
+	 * Clear 0x0F000000 bits of reboot status register to workaround
+	 * the FSBL not loading the bitstream after soft-reboot
+	 * This is a temporary solution until we know more.
+	 */
+	clrbits_le32(&slcr_base->reboot_status, 0xF000000);
+
+	writel(1, &slcr_base->pss_rst_ctrl);
+}
diff --git a/arch/arm/cpu/ixp/u-boot.lds b/arch/arm/cpu/ixp/u-boot.lds
index 2c823e1..8345b55 100644
--- a/arch/arm/cpu/ixp/u-boot.lds
+++ b/arch/arm/cpu/ixp/u-boot.lds
@@ -49,7 +49,7 @@
 
 	. = ALIGN(4);
 	.u_boot_list : {
-	#include <u-boot.lst>
+		KEEP(*(SORT(.u_boot_list*)));
 	}
 
 	. = ALIGN(4);
@@ -67,11 +67,17 @@
 
 	_end = .;
 
-	.bss __rel_dyn_start (OVERLAY) : {
-		__bss_start = .;
+	.bss_start __rel_dyn_start (OVERLAY) : {
+		KEEP(*(.__bss_start));
+	}
+
+	.bss __bss_start (OVERLAY) : {
 		*(.bss*)
 		 . = ALIGN(4);
-		__bss_end = .;
+		 __bss_end = .;
+	}
+	.bss_end __bss_end (OVERLAY) : {
+		KEEP(*(__bss_end));
 	}
 
 	/DISCARD/ : { *(.dynstr*) }
diff --git a/arch/arm/cpu/tegra114-common/pinmux.c b/arch/arm/cpu/tegra114-common/pinmux.c
index 52b3ec4..4983a05 100644
--- a/arch/arm/cpu/tegra114-common/pinmux.c
+++ b/arch/arm/cpu/tegra114-common/pinmux.c
@@ -37,6 +37,20 @@
 #define PMUX_OD_SHIFT		6
 #define PMUX_LOCK_SHIFT		7
 #define PMUX_IO_RESET_SHIFT	8
+#define PMUX_RCV_SEL_SHIFT	9
+
+#define PGRP_HSM_SHIFT		2
+#define PGRP_SCHMT_SHIFT	3
+#define PGRP_LPMD_SHIFT		4
+#define PGRP_LPMD_MASK		(3 << PGRP_LPMD_SHIFT)
+#define PGRP_DRVDN_SHIFT	12
+#define PGRP_DRVDN_MASK		(0x7F << PGRP_DRVDN_SHIFT)
+#define PGRP_DRVUP_SHIFT	20
+#define PGRP_DRVUP_MASK		(0x7F << PGRP_DRVUP_SHIFT)
+#define PGRP_SLWR_SHIFT		28
+#define PGRP_SLWR_MASK		(3 << PGRP_SLWR_SHIFT)
+#define PGRP_SLWF_SHIFT		30
+#define PGRP_SLWF_MASK		(3 << PGRP_SLWF_SHIFT)
 
 /* Convenient macro for defining pin group properties */
 #define PIN(pg_name, vdd, f0, f1, f2, f3, iod)	\
@@ -58,6 +72,10 @@
 #define PINO(pg_name, vdd, f0, f1, f2, f3) \
 	PIN(pg_name, vdd, f0, f1, f2, f3, OUTPUT)
 
+/* A pin group number which is not used */
+#define PIN_RESERVED \
+	PIN(NONE, NONE, INVALID, INVALID, INVALID, INVALID, NONE)
+
 const struct tegra_pingroup_desc tegra_soc_pingroups[PINGRP_COUNT] = {
 	/*	NAME	  VDD	   f0		f1	   f2	    f3  */
 	PINI(ULPI_DATA0,  BB,	   SPI3,       HSI,	   UARTA,   ULPI),
@@ -84,71 +102,71 @@
 	PINI(SDMMC1_DAT2, SDMMC1,  SDMMC1,     PWM0,       SPI4,    UARTA),
 	PINI(SDMMC1_DAT1, SDMMC1,  SDMMC1,     PWM1,       SPI4,    UARTA),
 	PINI(SDMMC1_DAT0, SDMMC1,  SDMMC1,     RSVD2,      SPI4,    UARTA),
-	PINI(GPIO_PV2,    BB,      RSVD1,      RSVD2,      RSVD3,   RSVD4),
-	PINI(GPIO_PV3,    BB,      RSVD1,      RSVD2,      RSVD3,   RSVD4),
+	PIN_RESERVED,	/* Reserved by t114: 0x3060 - 0x3064 */
+	PIN_RESERVED,
 	PINI(CLK2_OUT,    SDMMC1,  EXTPERIPH2, RSVD2,      RSVD3,   RSVD4),
 	PINI(CLK2_REQ,    SDMMC1,  DAP,        RSVD2,      RSVD3,   RSVD4),
-	PINO(LCD_PWR1,    LCD,     RSVD1,      RSVD2,      RSVD3,   RSVD4),
-	PINO(LCD_PWR2,    LCD,     RSVD1,      RSVD2,      RSVD3,   RSVD4),
-	PINO(LCD_SDIN,    LCD,     RSVD1,      RSVD2,      RSVD3,   RSVD4),
-	PINO(LCD_SDOUT,   LCD,     RSVD1,      RSVD2,      RSVD3,   RSVD4),
-	PINO(LCD_WR_N,    LCD,     RSVD1,      RSVD2,      RSVD3,   RSVD4),
-	PINO(LCD_CS0_N,   LCD,     RSVD1,      RSVD2,      RSVD3,   RSVD4),
-	PINO(LCD_DC0,     LCD,     RSVD1,      RSVD2,      RSVD3,   RSVD4),
-	PINO(LCD_SCK,     LCD,     RSVD1,      RSVD2,      RSVD3,   RSVD4),
-	PINO(LCD_PWR0,    LCD,     RSVD1,      RSVD2,      RSVD3,   RSVD4),
-	PINO(LCD_PCLK,    LCD,     RSVD1,      RSVD2,      RSVD3,   RSVD4),
-	PINO(LCD_DE,      LCD,     RSVD1,      RSVD2,      RSVD3,   RSVD4),
-	PINO(LCD_HSYNC,   LCD,     RSVD1,      RSVD2,      RSVD3,   RSVD4),
-	PINO(LCD_VSYNC,   LCD,     RSVD1,      RSVD2,      RSVD3,   RSVD4),
-	PINO(LCD_D0,      LCD,     RSVD1,      RSVD2,      RSVD3,   RSVD4),
-	PINO(LCD_D1,      LCD,     RSVD1,      RSVD2,      RSVD3,   RSVD4),
-	PINO(LCD_D2,      LCD,     RSVD1,      RSVD2,      RSVD3,   RSVD4),
-	PINO(LCD_D3,      LCD,     RSVD1,      RSVD2,      RSVD3,   RSVD4),
-	PINO(LCD_D4,      LCD,     RSVD1,      RSVD2,      RSVD3,   RSVD4),
-	PINO(LCD_D5,      LCD,     RSVD1,      RSVD2,      RSVD3,   RSVD4),
-	PINO(LCD_D6,      LCD,     RSVD1,      RSVD2,      RSVD3,   RSVD4),
-	PINO(LCD_D7,      LCD,     RSVD1,      RSVD2,      RSVD3,   RSVD4),
-	PINO(LCD_D8,      LCD,     RSVD1,      RSVD2,      RSVD3,   RSVD4),
-	PINO(LCD_D9,      LCD,     RSVD1,      RSVD2,      RSVD3,   RSVD4),
-	PINO(LCD_D10,     LCD,     RSVD1,      RSVD2,      RSVD3,   RSVD4),
-	PINO(LCD_D11,     LCD,     RSVD1,      RSVD2,      RSVD3,   RSVD4),
-	PINO(LCD_D12,     LCD,     RSVD1,      RSVD2,      RSVD3,   RSVD4),
-	PINO(LCD_D13,     LCD,     RSVD1,      RSVD2,      RSVD3,   RSVD4),
-	PINO(LCD_D14,     LCD,     RSVD1,      RSVD2,      RSVD3,   RSVD4),
-	PINO(LCD_D15,     LCD,     RSVD1,      RSVD2,      RSVD3,   RSVD4),
-	PINO(LCD_D16,     LCD,     RSVD1,      RSVD2,      RSVD3,   RSVD4),
-	PINO(LCD_D17,     LCD,     RSVD1,      RSVD2,      RSVD3,   RSVD4),
-	PINO(LCD_D18,     LCD,     RSVD1,      RSVD2,      RSVD3,   RSVD4),
-	PINO(LCD_D19,     LCD,     RSVD1,      RSVD2,      RSVD3,   RSVD4),
-	PINO(LCD_D20,     LCD,     RSVD1,      RSVD2,      RSVD3,   RSVD4),
-	PINO(LCD_D21,     LCD,     RSVD1,      RSVD2,      RSVD3,   RSVD4),
-	PINO(LCD_D22,     LCD,     RSVD1,      RSVD2,      RSVD3,   RSVD4),
-	PINO(LCD_D23,     LCD,     RSVD1,      RSVD2,      RSVD3,   RSVD4),
-	PINO(LCD_CS1_N,   LCD,     RSVD1,      RSVD2,      RSVD3,   RSVD4),
-	PINO(LCD_M1,      LCD,     RSVD1,      RSVD2,      RSVD3,   RSVD4),
-	PINO(LCD_DC1,     LCD,     RSVD1,      RSVD2,      RSVD3,   RSVD4),
+	PIN_RESERVED,	/* Reserved by t114: 0x3070 - 0x310c */
+	PIN_RESERVED,
+	PIN_RESERVED,
+	PIN_RESERVED,
+	PIN_RESERVED,
+	PIN_RESERVED,
+	PIN_RESERVED,
+	PIN_RESERVED,
+	PIN_RESERVED,
+	PIN_RESERVED,
+	PIN_RESERVED,
+	PIN_RESERVED,
+	PIN_RESERVED,
+	PIN_RESERVED,
+	PIN_RESERVED,
+	PIN_RESERVED,
+	PIN_RESERVED,
+	PIN_RESERVED,
+	PIN_RESERVED,
+	PIN_RESERVED,
+	PIN_RESERVED,
+	PIN_RESERVED,
+	PIN_RESERVED,
+	PIN_RESERVED,
+	PIN_RESERVED,
+	PIN_RESERVED,
+	PIN_RESERVED,
+	PIN_RESERVED,
+	PIN_RESERVED,
+	PIN_RESERVED,
+	PIN_RESERVED,
+	PIN_RESERVED,
+	PIN_RESERVED,
+	PIN_RESERVED,
+	PIN_RESERVED,
+	PIN_RESERVED,
+	PIN_RESERVED,
+	PIN_RESERVED,
+	PIN_RESERVED,
+	PIN_RESERVED,
 	PINI(HDMI_INT,    LCD,     RSVD1,      RSVD2,      RSVD3,   RSVD4),
 	PINI(DDC_SCL,     LCD,     I2C4,       RSVD2,      RSVD3,   RSVD4),
 	PINI(DDC_SDA,     LCD,     I2C4,       RSVD2,      RSVD3,   RSVD4),
-	PINI(CRT_HSYNC,   LCD,     RSVD1,      RSVD2,      RSVD3,   RSVD4),
-	PINI(CRT_VSYNC,   LCD,     RSVD1,      RSVD2,      RSVD3,   RSVD4),
-	PINI(VI_D0,       VI,      RSVD1,      RSVD2,      RSVD3,   RSVD4),
-	PINI(VI_D1,       VI,      RSVD1,      RSVD2,      RSVD3,   RSVD4),
-	PINI(VI_D2,       VI,      RSVD1,      RSVD2,      RSVD3,   RSVD4),
-	PINI(VI_D3,       VI,      RSVD1,      RSVD2,      RSVD3,   RSVD4),
-	PINI(VI_D4,       VI,      RSVD1,      RSVD2,      RSVD3,   RSVD4),
-	PINI(VI_D5,       VI,      RSVD1,      RSVD2,      RSVD3,   RSVD4),
-	PINI(VI_D6,       VI,      RSVD1,      RSVD2,      RSVD3,   RSVD4),
-	PINI(VI_D7,       VI,      RSVD1,      RSVD2,      RSVD3,   RSVD4),
-	PINI(VI_D8,       VI,      RSVD1,      RSVD2,      RSVD3,   RSVD4),
-	PINI(VI_D9,       VI,      RSVD1,      RSVD2,      RSVD3,   RSVD4),
-	PINI(VI_D10,      VI,      RSVD1,      RSVD2,      RSVD3,   RSVD4),
-	PINI(VI_D11,      VI,      RSVD1,      RSVD2,      RSVD3,   RSVD4),
-	PINI(VI_PCLK,     VI,      RSVD1,      RSVD2,      RSVD3,   RSVD4),
-	PINI(VI_MCLK,     VI,      RSVD1,      RSVD3,      RSVD3,   RSVD4),
-	PINI(VI_VSYNC,    VI,      RSVD1,      RSVD2,      RSVD3,   RSVD4),
-	PINI(VI_HSYNC,    VI,      RSVD1,      RSVD2,      RSVD3,   RSVD4),
+	PIN_RESERVED,	/* Reserved by t114: 0x311c - 0x3160 */
+	PIN_RESERVED,
+	PIN_RESERVED,
+	PIN_RESERVED,
+	PIN_RESERVED,
+	PIN_RESERVED,
+	PIN_RESERVED,
+	PIN_RESERVED,
+	PIN_RESERVED,
+	PIN_RESERVED,
+	PIN_RESERVED,
+	PIN_RESERVED,
+	PIN_RESERVED,
+	PIN_RESERVED,
+	PIN_RESERVED,
+	PIN_RESERVED,
+	PIN_RESERVED,
+	PIN_RESERVED,
 	PINI(UART2_RXD,   UART,    UARTB,      SPDIF,      UARTA,   SPI4),
 	PINI(UART2_TXD,   UART,    UARTB,      SPDIF,      UARTA,   SPI4),
 	PINI(UART2_RTS_N, UART,    UARTA,      UARTB,      RSVD3,   SPI4),
@@ -220,8 +238,8 @@
 	PINI(SDMMC4_DAT5, SDMMC4,  SDMMC4,     SPI3,       GMI,     RSVD4),
 	PINI(SDMMC4_DAT6, SDMMC4,  SDMMC4,     SPI3,       GMI,     RSVD4),
 	PINI(SDMMC4_DAT7, SDMMC4,  SDMMC4,     RSVD2,      GMI,     RSVD4),
-	PINI(SDMMC4_RST_N, SDMMC4, RSVD1,      RSVD2,      RSVD3,   SDMMC4),
-	PINI(CAM_MCLK,    CAM,     VI,         VI_ALT1,    VI_ALT2, RSVD4),
+	PIN_RESERVED,	/* Reserved by t114: 0x3280 */
+	PINI(CAM_MCLK,    CAM,     VI,         VI_ALT1,    VI_ALT3, RSVD4),
 	PINI(GPIO_PCC1,   CAM,     I2S4,       RSVD2,      RSVD3,   RSVD4),
 	PINI(GPIO_PBB0,   CAM,     I2S4,       VI,         VI_ALT1, VI_ALT3),
 	PINI(CAM_I2C_SCL, CAM,     VGP1,       I2C3,       RSVD3,   RSVD4),
@@ -246,11 +264,11 @@
 	PINI(KB_ROW8,     SYS,     KBC,        RSVD2,      RSVD3,   UARTA),
 	PINI(KB_ROW9,     SYS,     KBC,        RSVD2,      RSVD3,   UARTA),
 	PINI(KB_ROW10,    SYS,     KBC,        RSVD2,      RSVD3,   UARTA),
-	PINI(KB_ROW11,    SYS,     RSVD1,      RSVD2,      RSVD3,   RSVD4),
-	PINI(KB_ROW12,    SYS,     RSVD1,      RSVD2,      RSVD3,   RSVD4),
-	PINI(KB_ROW13,    SYS,     RSVD1,      RSVD2,      RSVD3,   RSVD4),
-	PINI(KB_ROW14,    SYS,     RSVD1,      RSVD2,      RSVD3,   RSVD4),
-	PINI(KB_ROW15,    SYS,     RSVD1,      RSVD2,      RSVD3,   RSVD4),
+	PIN_RESERVED,	/* Reserved by t114: 0x32e8 - 0x32f8 */
+	PIN_RESERVED,
+	PIN_RESERVED,
+	PIN_RESERVED,
+	PIN_RESERVED,
 	PINI(KB_COL0,     SYS,     KBC,        USB,        SPI2,    EMC_DLL),
 	PINI(KB_COL1,     SYS,     KBC,        RSVD2,      SPI2,    EMC_DLL),
 	PINI(KB_COL2,     SYS,     KBC,        RSVD2,      SPI2,    RSVD4),
@@ -278,36 +296,46 @@
 	PINI(DAP2_DIN,    AUDIO,   I2S1,       HDA,        RSVD3,   RSVD4),
 	PINI(DAP2_DOUT,   AUDIO,   I2S1,       HDA,        RSVD3,   RSVD4),
 	PINI(DAP2_SCLK,   AUDIO,   I2S1,       HDA,        RSVD3,   RSVD4),
-	PINI(SPI2_MOSI,   AUDIO,   SPI6,       CLDVFS,     RSVD3,   RSVD4),
-	PINI(SPI2_MISO,   AUDIO,   SPI6,       RSVD2,      RSVD3,   RSVD4),
-	PINI(SPI2_CS0_N,  AUDIO,   SPI6,       SPI1,       RSVD3,   RSVD4),
-	PINI(SPI2_SCK,    AUDIO,   SPI6,       CLDVFS,     RSVD3,   RSVD4),
-	PINI(SPI1_MOSI,   AUDIO,   RSVD1,      SPI1,       SPI2,    DAP2),
-	PINI(SPI1_SCK,    AUDIO,   RSVD1,      SPI1,       SPI2,    RSVD4),
-	PINI(SPI1_CS0_N,  AUDIO,   SPI6,       SPI1,       SPI2,    RSVD4),
-	PINI(SPI1_MISO,   AUDIO,   RSVD1,      SPI1,       SPI2,    RSVD4),
-	PINI(SPI2_CS1_N,  AUDIO,   RSVD1,      RSVD2,      RSVD3,   RSVD4),
-	PINI(SPI2_CS2_N,  AUDIO,   RSVD1,      RSVD2,      RSVD3,   RSVD4),
+	PINI(DVFS_PWM,    AUDIO,   SPI6,       CLDVFS,     RSVD3,   RSVD4),
+	PINI(GPIO_X1_AUD, AUDIO,   SPI6,       RSVD2,      RSVD3,   RSVD4),
+	PINI(GPIO_X3_AUD, AUDIO,   SPI6,       SPI1,       RSVD3,   RSVD4),
+	PINI(DVFS_CLK,    AUDIO,   SPI6,       CLDVFS,     RSVD3,   RSVD4),
+	PINI(GPIO_X4_AUD, AUDIO,   RSVD1,      SPI1,       SPI2,    DAP2),
+	PINI(GPIO_X5_AUD, AUDIO,   RSVD1,      SPI1,       SPI2,    RSVD4),
+	PINI(GPIO_X6_AUD, AUDIO,   SPI6,       SPI1,       SPI2,    RSVD4),
+	PINI(GPIO_X7_AUD, AUDIO,   RSVD1,      SPI1,       SPI2,    RSVD4),
+	PIN_RESERVED,   /* Reserved by t114: 0x3388 - 0x338c */
+	PIN_RESERVED,
 	PINI(SDMMC3_CLK,  SDMMC3,  SDMMC3,     RSVD2,      RSVD3,   SPI3),
 	PINI(SDMMC3_CMD,  SDMMC3,  SDMMC3,     PWM3,       UARTA,   SPI3),
 	PINI(SDMMC3_DAT0, SDMMC3,  SDMMC3,     RSVD2,      RSVD3,   SPI3),
 	PINI(SDMMC3_DAT1, SDMMC3,  SDMMC3,     PWM2,       UARTA,   SPI3),
 	PINI(SDMMC3_DAT2, SDMMC3,  SDMMC3,     PWM1,       DISPA,   SPI3),
 	PINI(SDMMC3_DAT3, SDMMC3,  SDMMC3,     PWM0,       DISPB,   SPI3),
-	PINI(SDMMC3_DAT4, SDMMC3,  RSVD1,      RSVD2,      RSVD3,   RSVD4),
-	PINI(SDMMC3_DAT5, SDMMC3,  RSVD1,      RSVD2,      RSVD3,   RSVD4),
-	PINI(SDMMC3_DAT6, SDMMC3,  RSVD1,      RSVD2,      RSVD3,   RSVD4),
-	PINI(SDMMC3_DAT7, SDMMC3,  RSVD1,      RSVD2,      RSVD3,   RSVD4),
+	PIN_RESERVED,   /* Reserved by t114: 0x33a8 - 0x33dc */
+	PIN_RESERVED,
+	PIN_RESERVED,
+	PIN_RESERVED,
+	PIN_RESERVED,
+	PIN_RESERVED,
+	PIN_RESERVED,
+	PIN_RESERVED,
+	PIN_RESERVED,
+	PIN_RESERVED,
+	PIN_RESERVED,
+	PIN_RESERVED,
+	PIN_RESERVED,
+	PIN_RESERVED,
 	PINI(HDMI_CEC,    SYS,     CEC,        SDMMC3,     RSVD3,   SOC),
 	PINI(SDMMC1_WP_N, SDMMC1,  SDMMC1,     CLK12,      SPI4,    UARTA),
-	PINI(SDMMC3_CD_N, SDMMC3,  SDMMC3,     OWR,        RSVD3,   RSVD4),
-	PINI(SPI1_CS1_N,  AUDIO,   SPI6,       RSVD2,      SPI2,    I2C1),
-	PINI(SPI1_CS2_N,  AUDIO,   SPI6,       SPI1,       SPI2,    I2C1),
-	PINI(USB_VBUS_EN0, SYS,    USB,        RSVD2,      RSVD3,   RSVD4),
-	PINI(USB_VBUS_EN1, SYS,    USB,        RSVD2,      RSVD3,   RSVD4),
+	PINI(SDMMC3_CD_N, SYS,  SDMMC3,     OWR,        RSVD3,   RSVD4),
+	PINI(GPIO_W2_AUD, AUDIO,   SPI6,       RSVD2,      SPI2,    I2C1),
+	PINI(GPIO_W3_AUD, AUDIO,   SPI6,       SPI1,       SPI2,    I2C1),
+	PINI(USB_VBUS_EN0, LCD,    USB,        RSVD2,      RSVD3,   RSVD4),
+	PINI(USB_VBUS_EN1, LCD,    USB,        RSVD2,      RSVD3,   RSVD4),
 	PINI(SDMMC3_CLK_LB_IN,  SDMMC3, SDMMC3, RSVD2,     RSVD3,   RSVD4),
-	PINO(SDMMC3_CLK_LB_OUT, SDMMC3, SDMMC3, RSVD2,     RSVD3,   RSVD4),
-	PINO(NAND_GMI_CLK_LB,   GMI,    SDMMC2, NAND,      GMI,     RSVD4),
+	PINI(SDMMC3_CLK_LB_OUT, SDMMC3, SDMMC3, RSVD2,     RSVD3,   RSVD4),
+	PIN_RESERVED,	/* Reserved by t114: 0x3404 */
 	PINO(RESET_OUT_N, SYS,     RSVD1,      RSVD2,      RSVD3, RESET_OUT_N),
 };
 
@@ -484,6 +512,30 @@
 	return 0;
 }
 
+static int pinmux_set_rcv_sel(enum pmux_pingrp pin,
+				enum pmux_pin_rcv_sel rcv_sel)
+{
+	struct pmux_tri_ctlr *pmt =
+			(struct pmux_tri_ctlr *)NV_PA_APB_MISC_BASE;
+	u32 *pin_rcv_sel = &pmt->pmt_ctl[pin];
+	u32 reg;
+
+	/* Error check on pin and rcv_sel */
+	assert(pmux_pingrp_isvalid(pin));
+	assert(pmux_pin_rcv_sel_isvalid(rcv_sel));
+
+	if (rcv_sel == PMUX_PIN_RCV_SEL_DEFAULT)
+		return 0;
+
+	reg = readl(pin_rcv_sel);
+	reg &= ~(0x1 << PMUX_RCV_SEL_SHIFT);
+	if (rcv_sel == PMUX_PIN_RCV_SEL_HIGH)
+		reg |= (0x1 << PMUX_RCV_SEL_SHIFT);
+	writel(reg, pin_rcv_sel);
+
+	return 0;
+}
+
 void pinmux_config_pingroup(struct pingroup_config *config)
 {
 	enum pmux_pingrp pin = config->pingroup;
@@ -495,6 +547,7 @@
 	pinmux_set_lock(pin, config->lock);
 	pinmux_set_od(pin, config->od);
 	pinmux_set_ioreset(pin, config->ioreset);
+	pinmux_set_rcv_sel(pin, config->rcv_sel);
 }
 
 void pinmux_config_table(struct pingroup_config *config, int len)
@@ -504,3 +557,184 @@
 	for (i = 0; i < len; i++)
 		pinmux_config_pingroup(&config[i]);
 }
+
+static int padgrp_set_drvup_slwf(enum pdrive_pingrp pad, int slwf)
+{
+	struct pmux_tri_ctlr *pmt =
+			(struct pmux_tri_ctlr *)NV_PA_APB_MISC_BASE;
+	u32 *pad_slwf = &pmt->pmt_drive[pad];
+	u32 reg;
+
+	/* Error check on pad and slwf */
+	assert(pmux_padgrp_isvalid(pad));
+	assert(pmux_pad_slw_isvalid(slwf));
+
+	/* NONE means unspecified/do not change/use POR value */
+	if (slwf == PGRP_SLWF_NONE)
+		return 0;
+
+	reg = readl(pad_slwf);
+	reg &= ~PGRP_SLWF_MASK;
+	reg |= (slwf << PGRP_SLWF_SHIFT);
+	writel(reg, pad_slwf);
+
+	return 0;
+}
+
+static int padgrp_set_drvdn_slwr(enum pdrive_pingrp pad, int slwr)
+{
+	struct pmux_tri_ctlr *pmt =
+			(struct pmux_tri_ctlr *)NV_PA_APB_MISC_BASE;
+	u32 *pad_slwr = &pmt->pmt_drive[pad];
+	u32 reg;
+
+	/* Error check on pad and slwr */
+	assert(pmux_padgrp_isvalid(pad));
+	assert(pmux_pad_slw_isvalid(slwr));
+
+	/* NONE means unspecified/do not change/use POR value */
+	if (slwr == PGRP_SLWR_NONE)
+		return 0;
+
+	reg = readl(pad_slwr);
+	reg &= ~PGRP_SLWR_MASK;
+	reg |= (slwr << PGRP_SLWR_SHIFT);
+	writel(reg, pad_slwr);
+
+	return 0;
+}
+
+static int padgrp_set_drvup(enum pdrive_pingrp pad, int drvup)
+{
+	struct pmux_tri_ctlr *pmt =
+			(struct pmux_tri_ctlr *)NV_PA_APB_MISC_BASE;
+	u32 *pad_drvup = &pmt->pmt_drive[pad];
+	u32 reg;
+
+	/* Error check on pad and drvup */
+	assert(pmux_padgrp_isvalid(pad));
+	assert(pmux_pad_drv_isvalid(drvup));
+
+	/* NONE means unspecified/do not change/use POR value */
+	if (drvup == PGRP_DRVUP_NONE)
+		return 0;
+
+	reg = readl(pad_drvup);
+	reg &= ~PGRP_DRVUP_MASK;
+	reg |= (drvup << PGRP_DRVUP_SHIFT);
+	writel(reg, pad_drvup);
+
+	return 0;
+}
+
+static int padgrp_set_drvdn(enum pdrive_pingrp pad, int drvdn)
+{
+	struct pmux_tri_ctlr *pmt =
+			(struct pmux_tri_ctlr *)NV_PA_APB_MISC_BASE;
+	u32 *pad_drvdn = &pmt->pmt_drive[pad];
+	u32 reg;
+
+	/* Error check on pad and drvdn */
+	assert(pmux_padgrp_isvalid(pad));
+	assert(pmux_pad_drv_isvalid(drvdn));
+
+	/* NONE means unspecified/do not change/use POR value */
+	if (drvdn == PGRP_DRVDN_NONE)
+		return 0;
+
+	reg = readl(pad_drvdn);
+	reg &= ~PGRP_DRVDN_MASK;
+	reg |= (drvdn << PGRP_DRVDN_SHIFT);
+	writel(reg, pad_drvdn);
+
+	return 0;
+}
+
+static int padgrp_set_lpmd(enum pdrive_pingrp pad, enum pgrp_lpmd lpmd)
+{
+	struct pmux_tri_ctlr *pmt =
+			(struct pmux_tri_ctlr *)NV_PA_APB_MISC_BASE;
+	u32 *pad_lpmd = &pmt->pmt_drive[pad];
+	u32 reg;
+
+	/* Error check pad and lpmd value */
+	assert(pmux_padgrp_isvalid(pad));
+	assert(pmux_pad_lpmd_isvalid(lpmd));
+
+	/* NONE means unspecified/do not change/use POR value */
+	if (lpmd == PGRP_LPMD_NONE)
+		return 0;
+
+	reg = readl(pad_lpmd);
+	reg &= ~PGRP_LPMD_MASK;
+	reg |= (lpmd << PGRP_LPMD_SHIFT);
+	writel(reg, pad_lpmd);
+
+	return 0;
+}
+
+static int padgrp_set_schmt(enum pdrive_pingrp pad, enum pgrp_schmt schmt)
+{
+	struct pmux_tri_ctlr *pmt =
+			(struct pmux_tri_ctlr *)NV_PA_APB_MISC_BASE;
+	u32 *pad_schmt = &pmt->pmt_drive[pad];
+	u32 reg;
+
+	/* Error check pad */
+	assert(pmux_padgrp_isvalid(pad));
+
+	/* NONE means unspecified/do not change/use POR value */
+	if (schmt == PGRP_SCHMT_NONE)
+		return 0;
+
+	reg = readl(pad_schmt);
+	reg &= ~(1 << PGRP_SCHMT_SHIFT);
+	if (schmt == PGRP_SCHMT_ENABLE)
+		reg |= (0x1 << PGRP_SCHMT_SHIFT);
+	writel(reg, pad_schmt);
+
+	return 0;
+}
+static int padgrp_set_hsm(enum pdrive_pingrp pad, enum pgrp_hsm hsm)
+{
+	struct pmux_tri_ctlr *pmt =
+			(struct pmux_tri_ctlr *)NV_PA_APB_MISC_BASE;
+	u32 *pad_hsm = &pmt->pmt_drive[pad];
+	u32 reg;
+
+	/* Error check pad */
+	assert(pmux_padgrp_isvalid(pad));
+
+	/* NONE means unspecified/do not change/use POR value */
+	if (hsm == PGRP_HSM_NONE)
+		return 0;
+
+	reg = readl(pad_hsm);
+	reg &= ~(1 << PGRP_HSM_SHIFT);
+	if (hsm == PGRP_HSM_ENABLE)
+		reg |= (0x1 << PGRP_HSM_SHIFT);
+	writel(reg, pad_hsm);
+
+	return 0;
+}
+
+void padctrl_config_pingroup(struct padctrl_config *config)
+{
+	enum pdrive_pingrp pad = config->padgrp;
+
+	padgrp_set_drvup_slwf(pad, config->slwf);
+	padgrp_set_drvdn_slwr(pad, config->slwr);
+	padgrp_set_drvup(pad, config->drvup);
+	padgrp_set_drvdn(pad, config->drvdn);
+	padgrp_set_lpmd(pad, config->lpmd);
+	padgrp_set_schmt(pad, config->schmt);
+	padgrp_set_hsm(pad, config->hsm);
+}
+
+void padgrp_config_table(struct padctrl_config *config, int len)
+{
+	int i;
+
+	for (i = 0; i < len; i++)
+		padctrl_config_pingroup(&config[i]);
+}
diff --git a/arch/arm/cpu/tegra30-common/pinmux.c b/arch/arm/cpu/tegra30-common/pinmux.c
index 122665f..eecf058 100644
--- a/arch/arm/cpu/tegra30-common/pinmux.c
+++ b/arch/arm/cpu/tegra30-common/pinmux.c
@@ -1,5 +1,5 @@
 /*
- * Copyright (c) 2010-2012, NVIDIA CORPORATION.  All rights reserved.
+ * Copyright (c) 2010-2013, NVIDIA CORPORATION.  All rights reserved.
  *
  * This program is free software; you can redistribute it and/or modify it
  * under the terms and conditions of the GNU General Public License,
@@ -38,6 +38,19 @@
 #define PMUX_LOCK_SHIFT		7
 #define PMUX_IO_RESET_SHIFT	8
 
+#define PGRP_HSM_SHIFT		2
+#define PGRP_SCHMT_SHIFT	3
+#define PGRP_LPMD_SHIFT		4
+#define PGRP_LPMD_MASK		(3 << PGRP_LPMD_SHIFT)
+#define PGRP_DRVDN_SHIFT	12
+#define PGRP_DRVDN_MASK		(0x7F << PGRP_DRVDN_SHIFT)
+#define PGRP_DRVUP_SHIFT	20
+#define PGRP_DRVUP_MASK		(0x7F << PGRP_DRVUP_SHIFT)
+#define PGRP_SLWR_SHIFT		28
+#define PGRP_SLWR_MASK		(3 << PGRP_SLWR_SHIFT)
+#define PGRP_SLWF_SHIFT		30
+#define PGRP_SLWF_MASK		(3 << PGRP_SLWF_SHIFT)
+
 /* Convenient macro for defining pin group properties */
 #define PIN(pg_name, vdd, f0, f1, f2, f3, iod)	\
 	{						\
@@ -504,3 +517,178 @@
 	for (i = 0; i < len; i++)
 		pinmux_config_pingroup(&config[i]);
 }
+
+static int padgrp_set_drvup_slwf(enum pdrive_pingrp pad,
+				int slwf)
+{
+	struct pmux_tri_ctlr *pmt =
+			(struct pmux_tri_ctlr *)NV_PA_APB_MISC_BASE;
+	u32 *pad_slwf = &pmt->pmt_drive[pad];
+	u32 reg;
+
+	/* Error check on pad and slwf */
+	assert(pmux_padgrp_isvalid(pad));
+	assert(pmux_pad_slw_isvalid(slwf));
+
+	/* NONE means unspecified/do not change/use POR value */
+	if (slwf == PGRP_SLWF_NONE)
+		return 0;
+
+	reg = readl(pad_slwf);
+	reg &= ~PGRP_SLWF_MASK;
+	reg |= (slwf << PGRP_SLWF_SHIFT);
+	writel(reg, pad_slwf);
+
+	return 0;
+}
+
+static int padgrp_set_drvdn_slwr(enum pdrive_pingrp pad, int slwr)
+{
+	struct pmux_tri_ctlr *pmt =
+			(struct pmux_tri_ctlr *)NV_PA_APB_MISC_BASE;
+	u32 *pad_slwr = &pmt->pmt_drive[pad];
+	u32 reg;
+
+	/* Error check on pad and slwr */
+	assert(pmux_padgrp_isvalid(pad));
+	assert(pmux_pad_slw_isvalid(slwr));
+
+	/* NONE means unspecified/do not change/use POR value */
+	if (slwr == PGRP_SLWR_NONE)
+		return 0;
+
+	reg = readl(pad_slwr);
+	reg &= ~PGRP_SLWR_MASK;
+	reg |= (slwr << PGRP_SLWR_SHIFT);
+	writel(reg, pad_slwr);
+
+	return 0;
+}
+
+static int padgrp_set_drvup(enum pdrive_pingrp pad, int drvup)
+{
+	struct pmux_tri_ctlr *pmt =
+			(struct pmux_tri_ctlr *)NV_PA_APB_MISC_BASE;
+	u32 *pad_drvup = &pmt->pmt_drive[pad];
+	u32 reg;
+
+	/* Error check on pad and drvup */
+	assert(pmux_padgrp_isvalid(pad));
+	assert(pmux_pad_drv_isvalid(drvup));
+
+	/* NONE means unspecified/do not change/use POR value */
+	if (drvup == PGRP_DRVUP_NONE)
+		return 0;
+
+	reg = readl(pad_drvup);
+	reg &= ~PGRP_DRVUP_MASK;
+	reg |= (drvup << PGRP_DRVUP_SHIFT);
+	writel(reg, pad_drvup);
+
+	return 0;
+}
+
+static int padgrp_set_drvdn(enum pdrive_pingrp pad, int drvdn)
+{
+	struct pmux_tri_ctlr *pmt =
+			(struct pmux_tri_ctlr *)NV_PA_APB_MISC_BASE;
+	u32 *pad_drvdn = &pmt->pmt_drive[pad];
+	u32 reg;
+
+	/* Error check on pad and drvdn */
+	assert(pmux_padgrp_isvalid(pad));
+	assert(pmux_pad_drv_isvalid(drvdn));
+
+	/* NONE means unspecified/do not change/use POR value */
+	if (drvdn == PGRP_DRVDN_NONE)
+		return 0;
+
+	reg = readl(pad_drvdn);
+	reg &= ~PGRP_DRVDN_MASK;
+	reg |= (drvdn << PGRP_DRVDN_SHIFT);
+	writel(reg, pad_drvdn);
+
+	return 0;
+}
+
+static int padgrp_set_lpmd(enum pdrive_pingrp pad, enum pgrp_lpmd lpmd)
+{
+	struct pmux_tri_ctlr *pmt =
+			(struct pmux_tri_ctlr *)NV_PA_APB_MISC_BASE;
+	u32 *pad_lpmd = &pmt->pmt_drive[pad];
+	u32 reg;
+
+	/* Error check pad and lpmd value */
+	assert(pmux_padgrp_isvalid(pad));
+	assert(pmux_pad_lpmd_isvalid(lpmd));
+
+	/* NONE means unspecified/do not change/use POR value */
+	if (lpmd == PGRP_LPMD_NONE)
+		return 0;
+
+	reg = readl(pad_lpmd);
+	reg &= ~PGRP_LPMD_MASK;
+	reg |= (lpmd << PGRP_LPMD_SHIFT);
+	writel(reg, pad_lpmd);
+
+	return 0;
+}
+
+static int padgrp_set_schmt(enum pdrive_pingrp pad, enum pgrp_schmt schmt)
+{
+	struct pmux_tri_ctlr *pmt =
+			(struct pmux_tri_ctlr *)NV_PA_APB_MISC_BASE;
+	u32 *pad_schmt = &pmt->pmt_drive[pad];
+	u32 reg;
+
+	/* Error check pad */
+	assert(pmux_padgrp_isvalid(pad));
+
+	reg = readl(pad_schmt);
+	reg &= ~(1 << PGRP_SCHMT_SHIFT);
+	if (schmt == PGRP_SCHMT_ENABLE)
+		reg |= (0x1 << PGRP_SCHMT_SHIFT);
+	writel(reg, pad_schmt);
+
+	return 0;
+}
+static int padgrp_set_hsm(enum pdrive_pingrp pad,
+			enum pgrp_hsm hsm)
+{
+	struct pmux_tri_ctlr *pmt =
+			(struct pmux_tri_ctlr *)NV_PA_APB_MISC_BASE;
+	u32 *pad_hsm = &pmt->pmt_drive[pad];
+	u32 reg;
+
+	/* Error check pad */
+	assert(pmux_padgrp_isvalid(pad));
+
+	reg = readl(pad_hsm);
+	reg &= ~(1 << PGRP_HSM_SHIFT);
+	if (hsm == PGRP_HSM_ENABLE)
+		reg |= (0x1 << PGRP_HSM_SHIFT);
+	writel(reg, pad_hsm);
+
+	return 0;
+}
+
+void padctrl_config_pingroup(struct padctrl_config *config)
+{
+	enum pdrive_pingrp pad = config->padgrp;
+
+	padgrp_set_drvup_slwf(pad, config->slwf);
+	padgrp_set_drvdn_slwr(pad, config->slwr);
+	padgrp_set_drvup(pad, config->drvup);
+	padgrp_set_drvdn(pad, config->drvdn);
+	padgrp_set_lpmd(pad, config->lpmd);
+	padgrp_set_schmt(pad, config->schmt);
+	padgrp_set_hsm(pad, config->hsm);
+}
+
+void padgrp_config_table(struct padctrl_config *config, int len)
+{
+	int i;
+
+	for (i = 0; i < len; i++)
+		padctrl_config_pingroup(&config[i]);
+}
diff --git a/arch/arm/cpu/u-boot-spl.lds b/arch/arm/cpu/u-boot-spl.lds
new file mode 100644
index 0000000..3c0d99ca
--- /dev/null
+++ b/arch/arm/cpu/u-boot-spl.lds
@@ -0,0 +1,93 @@
+/*
+ * Copyright (c) 2004-2008 Texas Instruments
+ *
+ * (C) Copyright 2002
+ * Gary Jennejohn, DENX Software Engineering, <garyj@denx.de>
+ *
+ * See file CREDITS for list of people who contributed to this
+ * project.
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of
+ * the License, or (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
+ * MA 02111-1307 USA
+ */
+
+OUTPUT_FORMAT("elf32-littlearm", "elf32-littlearm", "elf32-littlearm")
+OUTPUT_ARCH(arm)
+ENTRY(_start)
+SECTIONS
+{
+	. = 0x00000000;
+
+	. = ALIGN(4);
+	.text :
+	{
+		__image_copy_start = .;
+		CPUDIR/start.o (.text*)
+		*(.text*)
+	}
+
+	. = ALIGN(4);
+	.rodata : { *(SORT_BY_ALIGNMENT(SORT_BY_NAME(.rodata*))) }
+
+	. = ALIGN(4);
+	.data : {
+		*(.data*)
+	}
+
+	. = ALIGN(4);
+
+	. = .;
+
+	__image_copy_end = .;
+
+	.rel.dyn : {
+		__rel_dyn_start = .;
+		*(.rel*)
+		__rel_dyn_end = .;
+	}
+
+	.dynsym : {
+		__dynsym_start = .;
+		*(.dynsym)
+	}
+
+	_end = .;
+
+	/*
+	 * Deprecated: this MMU section is used by pxa at present but
+	 * should not be used by new boards/CPUs.
+	 */
+	. = ALIGN(4096);
+	.mmutable : {
+		*(.mmutable)
+	}
+
+	.bss __rel_dyn_start (OVERLAY) : {
+		__bss_start = .;
+		*(.bss*)
+		 . = ALIGN(4);
+		__bss_end = .;
+	}
+
+	/DISCARD/ : { *(.dynstr*) }
+	/DISCARD/ : { *(.dynamic*) }
+	/DISCARD/ : { *(.plt*) }
+	/DISCARD/ : { *(.interp*) }
+	/DISCARD/ : { *(.gnu*) }
+}
+
+#if defined(CONFIG_SPL_TEXT_BASE) && defined(CONFIG_SPL_MAX_SIZE)
+ASSERT(__bss_end < (CONFIG_SPL_TEXT_BASE + CONFIG_SPL_MAX_SIZE), "SPL image too big");
+#endif
diff --git a/arch/arm/cpu/u-boot.lds b/arch/arm/cpu/u-boot.lds
index b337e7b..3a1083d 100644
--- a/arch/arm/cpu/u-boot.lds
+++ b/arch/arm/cpu/u-boot.lds
@@ -52,7 +52,7 @@
 
 	. = ALIGN(4);
 	.u_boot_list : {
-	#include <u-boot.lst>
+		KEEP(*(SORT(.u_boot_list*)));
 	}
 
 	. = ALIGN(4);
@@ -81,11 +81,18 @@
 		*(.mmutable)
 	}
 
-	.bss __rel_dyn_start (OVERLAY) : {
-		__bss_start = .;
+	.bss_start __rel_dyn_start (OVERLAY) : {
+		KEEP(*(.__bss_start));
+	}
+
+	.bss __bss_start (OVERLAY) : {
 		*(.bss*)
 		 . = ALIGN(4);
-		__bss_end = .;
+		 __bss_end = .;
+	}
+
+	.bss_end __bss_end (OVERLAY) : {
+		KEEP(*(__bss_end));
 	}
 
 	/DISCARD/ : { *(.dynstr*) }