keystone2: ecc: add ddr3 error detection and correction support
This patch adds the DDR3 ECC support to enable ECC in the DDR3
EMIF controller for Keystone II devices.
By default, ECC will only be enabled if RMW is supported in the
DDR EMIF controller. The entire DDR memory will be scrubbed to
zero using an EDMA channel after ECC is enabled and before
u-boot is re-located to DDR memory.
An ecc_test environment variable is added for ECC testing.
If ecc_test is set to 0, a detection of 2-bit error will reset
the device, if ecc_test is set to 1, 2-bit error detection
will not reset the device, user can still boot the kernel to
check the ECC error handling in kernel.
Signed-off-by: Hao Zhang <hzhang@ti.com>
Signed-off-by: Vitaly Andrianov <vitalya@ti.com>
Signed-off-by: Ivan Khoronzhuk <ivan.khoronzhuk@ti.com>
diff --git a/arch/arm/include/asm/arch-keystone/ddr3.h b/arch/arm/include/asm/arch-keystone/ddr3.h
index 6bf35d3..b044d6f 100644
--- a/arch/arm/include/asm/arch-keystone/ddr3.h
+++ b/arch/arm/include/asm/arch-keystone/ddr3.h
@@ -49,8 +49,14 @@
};
void ddr3_init(void);
+int ddr3_get_size(void);
void ddr3_reset_ddrphy(void);
+void ddr3_init_ecc(u32 base);
+void ddr3_disable_ecc(u32 base);
+void ddr3_check_ecc_int(u32 base);
+int ddr3_ecc_support_rmw(u32 base);
void ddr3_err_reset_workaround(void);
+void ddr3_enable_ecc(u32 base, int test);
void ddr3_init_ddrphy(u32 base, struct ddr3_phy_config *phy_cfg);
void ddr3_init_ddremif(u32 base, struct ddr3_emif_config *emif_cfg);
diff --git a/arch/arm/include/asm/arch-keystone/hardware-k2hk.h b/arch/arm/include/asm/arch-keystone/hardware-k2hk.h
index 28de3f5..5a9ea4f 100644
--- a/arch/arm/include/asm/arch-keystone/hardware-k2hk.h
+++ b/arch/arm/include/asm/arch-keystone/hardware-k2hk.h
@@ -79,6 +79,10 @@
#define KS2_DDR3B_EMIF_DATA_BASE 0x60000000
#define KS2_DDR3B_DDRPHYC 0x02328000
+#define KS2_CIC2_DDR3_ECC_IRQ_NUM 0x0D3 /* DDR3 ECC system irq number */
+#define KS2_CIC2_DDR3_ECC_CHAN_NUM 0x01D /* DDR3 ECC int mapped to CIC2
+ channel 29 */
+
/* SGMII SerDes */
#define KS2_LANES_PER_SGMII_SERDES 4
diff --git a/arch/arm/include/asm/arch-keystone/hardware.h b/arch/arm/include/asm/arch-keystone/hardware.h
index 8e0b879..c6a54d8 100644
--- a/arch/arm/include/asm/arch-keystone/hardware.h
+++ b/arch/arm/include/asm/arch-keystone/hardware.h
@@ -87,6 +87,52 @@
#define KS2_DDR3_PLLCTRL_PHY_RESET 0x80000000
+/* DDR3 ECC */
+#define KS2_DDR3_ECC_INT_STATUS_OFFSET 0x0AC
+#define KS2_DDR3_ECC_INT_ENABLE_SET_SYS_OFFSET 0x0B4
+#define KS2_DDR3_ECC_CTRL_OFFSET 0x110
+#define KS2_DDR3_ECC_ADDR_RANGE1_OFFSET 0x114
+#define KS2_DDR3_ONE_BIT_ECC_ERR_CNT_OFFSET 0x130
+#define KS2_DDR3_ONE_BIT_ECC_ERR_ADDR_LOG_OFFSET 0x13C
+
+/* DDR3 ECC Interrupt Status register */
+#define KS2_DDR3_1B_ECC_ERR_SYS BIT(5)
+#define KS2_DDR3_2B_ECC_ERR_SYS BIT(4)
+#define KS2_DDR3_WR_ECC_ERR_SYS BIT(3)
+
+/* DDR3 ECC Control register */
+#define KS2_DDR3_ECC_EN BIT(31)
+#define KS2_DDR3_ECC_ADDR_RNG_PROT BIT(30)
+#define KS2_DDR3_ECC_VERIFY_EN BIT(29)
+#define KS2_DDR3_ECC_RMW_EN BIT(28)
+#define KS2_DDR3_ECC_ADDR_RNG_1_EN BIT(0)
+
+#define KS2_DDR3_ECC_ENABLE (KS2_DDR3_ECC_EN | \
+ KS2_DDR3_ECC_ADDR_RNG_PROT | \
+ KS2_DDR3_ECC_VERIFY_EN)
+
+/* EDMA */
+#define KS2_EDMA0_BASE 0x02700000
+
+/* EDMA3 register offsets */
+#define KS2_EDMA_QCHMAP0 0x0200
+#define KS2_EDMA_IPR 0x1068
+#define KS2_EDMA_ICR 0x1070
+#define KS2_EDMA_QEECR 0x1088
+#define KS2_EDMA_QEESR 0x108c
+#define KS2_EDMA_PARAM_1(x) (0x4020 + (4 * x))
+
+/* Chip Interrupt Controller */
+#define KS2_CIC2_BASE 0x02608000
+
+/* Chip Interrupt Controller register offsets */
+#define KS2_CIC_CTRL 0x04
+#define KS2_CIC_HOST_CTRL 0x0C
+#define KS2_CIC_GLOBAL_ENABLE 0x10
+#define KS2_CIC_SYS_ENABLE_IDX_SET 0x28
+#define KS2_CIC_HOST_ENABLE_IDX_SET 0x34
+#define KS2_CIC_CHAN_MAP(n) (0x0400 + (n << 2))
+
#define KS2_UART0_BASE 0x02530c00
#define KS2_UART1_BASE 0x02531000