diff --git a/arch/arm/dts/Makefile b/arch/arm/dts/Makefile
index 26f1e92..8c137f5 100644
--- a/arch/arm/dts/Makefile
+++ b/arch/arm/dts/Makefile
@@ -28,14 +28,16 @@
 	exynos5422-odroidxu3.dtb
 dtb-$(CONFIG_EXYNOS7420) += exynos7420-espresso7420.dtb
 dtb-$(CONFIG_ARCH_ROCKCHIP) += \
+	rk3036-sdk.dtb \
 	rk3288-firefly.dtb \
-	rk3288-jerry.dtb \
+	rk3288-veyron-jerry.dtb \
+	rk3288-veyron-mickey.dtb \
+	rk3288-veyron-minnie.dtb \
 	rk3288-rock2-square.dtb \
 	rk3288-evb.dtb \
 	rk3288-fennec.dtb \
 	rk3288-miniarm.dtb \
 	rk3288-popmetal.dtb \
-	rk3036-sdk.dtb \
 	rk3399-evb.dtb
 dtb-$(CONFIG_ARCH_MESON) += \
 	meson-gxbb-odroidc2.dtb
diff --git a/arch/arm/dts/rk3036-sdk.dts b/arch/arm/dts/rk3036-sdk.dts
index 1c9ddf9..bdc7b98 100644
--- a/arch/arm/dts/rk3036-sdk.dts
+++ b/arch/arm/dts/rk3036-sdk.dts
@@ -16,10 +16,25 @@
 		stdout-path = &uart2;
 	};
 
-	usb_control {
-		compatible = "rockchip,rk3036-usb-control";
-		host_drv_gpio = <&gpio2 23 GPIO_ACTIVE_LOW>;
-		otg_drv_gpio = <&gpio0 26 GPIO_ACTIVE_LOW>;
+	vcc5v0_otg: vcc5v0-otg-drv {
+		compatible = "regulator-fixed";
+		regulator-name = "vcc5v0_otg";
+		gpio = <&gpio0 26 GPIO_ACTIVE_HIGH>;
+		pinctrl-names = "default";
+		pinctrl-0 = <&otg_vbus_drv>;
+		regulator-min-microvolt = <5000000>;
+		regulator-max-microvolt = <5000000>;
+	};
+
+	vcc5v0_host: vcc5v0-host-drv {
+		compatible = "regulator-fixed";
+		regulator-name = "vcc5v0_host";
+		gpio = <&gpio2 23 GPIO_ACTIVE_HIGH>;
+		pinctrl-names = "default";
+		pinctrl-0 = <&host_vbus_drv>;
+		regulator-min-microvolt = <5000000>;
+		regulator-max-microvolt = <5000000>;
+		regulator-always-on;
 	};
 };
 
@@ -42,3 +57,17 @@
 &usb_otg {
 	status = "okay";
 };
+
+&pinctrl {
+	usb_otg {
+		otg_vbus_drv: host-vbus-drv {
+			rockchip,pins = <0 26 RK_FUNC_GPIO &pcfg_pull_none>;
+		};
+	};
+
+	usb_host {
+		host_vbus_drv: host-vbus-drv {
+			rockchip,pins = <2 23 RK_FUNC_GPIO &pcfg_pull_none>;
+		};
+	};
+};
diff --git a/arch/arm/dts/rk3288-veyron-chromebook.dtsi b/arch/arm/dts/rk3288-veyron-chromebook.dtsi
index bbbc2f4..f88a868 100644
--- a/arch/arm/dts/rk3288-veyron-chromebook.dtsi
+++ b/arch/arm/dts/rk3288-veyron-chromebook.dtsi
@@ -13,6 +13,8 @@
 / {
 	aliases {
 		i2c20 = &i2c_tunnel;
+		video0 = &vopl;
+		video1 = &vopb;
 	};
 
 	gpio_keys: gpio-keys {
diff --git a/arch/arm/dts/rk3288-jerry.dts b/arch/arm/dts/rk3288-veyron-jerry.dts
similarity index 92%
rename from arch/arm/dts/rk3288-jerry.dts
rename to arch/arm/dts/rk3288-veyron-jerry.dts
index 2aa3b9f..8aab607 100644
--- a/arch/arm/dts/rk3288-jerry.dts
+++ b/arch/arm/dts/rk3288-veyron-jerry.dts
@@ -55,6 +55,17 @@
 	};
 };
 
+&dmc {
+	rockchip,pctl-timing = <0x29a 0xc8 0x1f4 0x42 0x4e 0x4 0xea 0xa
+		0x5 0x0 0xa 0x7 0x19 0x24 0xa 0x7
+		0x5 0xa 0x5 0x200 0x5 0x10 0x40 0x0
+		0x1 0x7 0x7 0x4 0xc 0x43 0x100 0x0
+		0x5 0x0>;
+	rockchip,phy-timing = <0x48f9aab4 0xea0910 0x1002c200
+		0xa60 0x40 0x10 0x0>;
+	rockchip,sdram-params = <0x30B25564 0x627 3 666000000 3 9 1>;
+};
+
 &gpio_keys {
 	power {
 		gpios = <&gpio0 5 GPIO_ACTIVE_LOW>;
@@ -108,11 +119,6 @@
 	pinctrl-0 = <&vcc50_hdmi_en>;
 };
 
-&vopb {
-	/* Disable this so that we use vopl */
-	status = "disabled";
-};
-
 &edp {
 	pinctrl-names = "default";
 	pinctrl-0 = <&edp_hpd>;
diff --git a/arch/arm/dts/rk3288-veyron-mickey.dts b/arch/arm/dts/rk3288-veyron-mickey.dts
new file mode 100644
index 0000000..e0dc362
--- /dev/null
+++ b/arch/arm/dts/rk3288-veyron-mickey.dts
@@ -0,0 +1,277 @@
+/*
+ * Google Veyron Mickey Rev 0 board device tree source
+ *
+ * Copyright 2015 Google, Inc
+ *
+ * This file is dual-licensed: you can use it either under the terms
+ * of the GPL or the X11 license, at your option. Note that this dual
+ * licensing only applies to this file, and not this project as a
+ * whole.
+ *
+ *  a) This file is free software; you can redistribute it and/or
+ *     modify it under the terms of the GNU General Public License as
+ *     published by the Free Software Foundation; either version 2 of the
+ *     License, or (at your option) any later version.
+ *
+ *     This file is distributed in the hope that it will be useful,
+ *     but WITHOUT ANY WARRANTY; without even the implied warranty of
+ *     MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ *     GNU General Public License for more details.
+ *
+ *  Or, alternatively,
+ *
+ *  b) Permission is hereby granted, free of charge, to any person
+ *     obtaining a copy of this software and associated documentation
+ *     files (the "Software"), to deal in the Software without
+ *     restriction, including without limitation the rights to use,
+ *     copy, modify, merge, publish, distribute, sublicense, and/or
+ *     sell copies of the Software, and to permit persons to whom the
+ *     Software is furnished to do so, subject to the following
+ *     conditions:
+ *
+ *     The above copyright notice and this permission notice shall be
+ *     included in all copies or substantial portions of the Software.
+ *
+ *     THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND,
+ *     EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES
+ *     OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
+ *     NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT
+ *     HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY,
+ *     WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING
+ *     FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR
+ *     OTHER DEALINGS IN THE SOFTWARE.
+ */
+
+/dts-v1/;
+#include "rk3288-veyron-chromebook.dtsi"
+
+/ {
+	model = "Google Mickey";
+	compatible = "google,veyron-mickey-rev8", "google,veyron-mickey-rev7",
+		     "google,veyron-mickey-rev6", "google,veyron-mickey-rev5",
+		     "google,veyron-mickey-rev4", "google,veyron-mickey-rev3",
+		     "google,veyron-mickey-rev2", "google,veyron-mickey-rev1",
+		     "google,veyron-mickey-rev0", "google,veyron-mickey",
+		     "google,veyron", "rockchip,rk3288";
+
+	vcc_5v: vcc-5v {
+		vin-supply = <&vcc33_sys>;
+	};
+
+	vcc33_io: vcc33_io {
+		compatible = "regulator-fixed";
+		regulator-name = "vcc33_io";
+		regulator-always-on;
+		regulator-boot-on;
+		vin-supply = <&vcc33_sys>;
+	};
+};
+
+&cpu_thermal {
+	/delete-node/ trips;
+	/delete-node/ cooling-maps;
+
+	trips {
+		cpu_alert_almost_warm: cpu_alert_almost_warm {
+			temperature = <63000>; /* millicelsius */
+			hysteresis = <2000>; /* millicelsius */
+			type = "passive";
+		};
+		cpu_alert_warm: cpu_alert_warm {
+			temperature = <65000>; /* millicelsius */
+			hysteresis = <2000>; /* millicelsius */
+			type = "passive";
+		};
+		cpu_alert_almost_hot: cpu_alert_almost_hot {
+			temperature = <80000>; /* millicelsius */
+			hysteresis = <2000>; /* millicelsius */
+			type = "passive";
+		};
+		cpu_alert_hot: cpu_alert_hot {
+			temperature = <82000>; /* millicelsius */
+			hysteresis = <2000>; /* millicelsius */
+			type = "passive";
+		};
+		cpu_alert_hotter: cpu_alert_hotter {
+			temperature = <84000>; /* millicelsius */
+			hysteresis = <2000>; /* millicelsius */
+			type = "passive";
+		};
+		cpu_alert_very_hot: cpu_alert_very_hot {
+			temperature = <85000>; /* millicelsius */
+			hysteresis = <2000>; /* millicelsius */
+			type = "passive";
+		};
+		cpu_crit: cpu_crit {
+			temperature = <90000>; /* millicelsius */
+			hysteresis = <2000>; /* millicelsius */
+			type = "critical";
+		};
+	};
+
+	cooling-maps {
+		/*
+		 * After 1st level, throttle the CPU down to as low as 1.4 GHz
+		 * and don't let the GPU go faster than 400 MHz.  Note that we
+		 * won't throttle the GPU lower than 400 MHz due to CPU
+		 * heat--we'll let the GPU do the rest itself.
+		 */
+		cpu_warm_limit_cpu {
+			trip = <&cpu_alert_warm>;
+			cooling-device =
+				<&cpu0 THERMAL_NO_LIMIT 4>;
+		};
+
+		/*
+		 * Add some discrete steps to help throttling system deal
+		 * with the fact that there are two passive cooling devices:
+		 * the CPU and the GPU.
+		 *
+		 * - 1.2 GHz - 1.0 GHz (almost hot)
+		 * - 800 MHz           (hot)
+		 * - 800 MHz - 696 MHz (hotter)
+		 * - 696 MHz - min     (very hot)
+		 *
+		 * Note:
+		 * - 800 MHz appears to be a "sweet spot" for me.  I can run
+		 *   some pretty serious workload here and be happy.
+		 * - After 696 MHz we stop lowering voltage, so throttling
+		 *   past there is less effective.
+		 */
+		cpu_almost_hot_limit_cpu {
+			trip = <&cpu_alert_almost_hot>;
+			cooling-device =
+				<&cpu0 5 6>;
+		};
+		cpu_hot_limit_cpu {
+			trip = <&cpu_alert_hot>;
+			cooling-device =
+				<&cpu0 7 7>;
+		};
+		cpu_hotter_limit_cpu {
+			trip = <&cpu_alert_hotter>;
+			cooling-device =
+				<&cpu0 7 8>;
+		};
+		cpu_very_hot_limit_cpu {
+			trip = <&cpu_alert_very_hot>;
+			cooling-device =
+				<&cpu0 8 THERMAL_NO_LIMIT>;
+		};
+	};
+};
+
+&dmc {
+	rockchip,pctl-timing = <0x215 0xc8 0x0 0x35 0x26 0x2 0x70 0x2000d
+		0x6 0x0 0x8 0x4 0x17 0x24 0xd 0x6
+		0x4 0x8 0x4 0x76 0x4 0x0 0x30 0x0
+		0x1 0x2 0x2 0x4 0x0 0x0 0xc0 0x4
+		0x8 0x1f4>;
+	rockchip,phy-timing = <0x48d7dd93 0x187008d8 0x121076
+		0x0 0xc3 0x6 0x2>;
+	rockchip,sdram-params = <0x20d266a4 0x5b6 2 533000000 6 9 1>;
+};
+
+&emmc {
+	/delete-property/mmc-hs200-1_8v;
+};
+
+&i2c2 {
+	status = "disabled";
+};
+
+&i2c4 {
+	status = "disabled";
+};
+
+&i2s {
+	status = "okay";
+	clock-names = "i2s_hclk", "i2s_clk", "i2s_clk_out";
+	clocks = <&cru HCLK_I2S0>, <&cru SCLK_I2S0>, <&cru SCLK_I2S0_OUT>;
+};
+
+&rk808 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pmic_int_l &dvs_1 &dvs_2>;
+	dvs-gpios = <&gpio7 12 GPIO_ACTIVE_HIGH>,
+		    <&gpio7 15 GPIO_ACTIVE_HIGH>;
+
+	/delete-property/ vcc6-supply;
+	/delete-property/ vcc12-supply;
+
+	vcc11-supply = <&vcc33_sys>;
+
+	regulators {
+		/* vcc33_io is sourced directly from vcc33_sys */
+		/delete-node/ LDO_REG1;
+		/delete-node/ LDO_REG7;
+
+		/* This is not a pwren anymore, but the real power supply */
+		vdd10_lcd: LDO_REG7 {
+			regulator-always-on;
+			regulator-boot-on;
+			regulator-min-microvolt = <1000000>;
+			regulator-max-microvolt = <1000000>;
+			regulator-name = "vdd10_lcd";
+			regulator-suspend-mem-disabled;
+		};
+
+		vcc18_lcd: LDO_REG8 {
+			regulator-always-on;
+			regulator-boot-on;
+			regulator-min-microvolt = <1800000>;
+			regulator-max-microvolt = <1800000>;
+			regulator-name = "vcc18_lcd";
+			regulator-suspend-mem-disabled;
+		};
+	};
+};
+
+&pinctrl {
+	hdmi {
+		power_hdmi_on: power-hdmi-on {
+			rockchip,pins = <7 11 RK_FUNC_GPIO &pcfg_pull_none>;
+		};
+	};
+
+	pmic {
+		dvs_1: dvs-1 {
+			rockchip,pins = <7 12 RK_FUNC_GPIO &pcfg_pull_down>;
+		};
+
+		dvs_2: dvs-2 {
+			rockchip,pins = <7 15 RK_FUNC_GPIO &pcfg_pull_down>;
+		};
+	};
+};
+
+&sdmmc {
+	status = "disabled";
+};
+
+&sdio0 {
+	status = "disabled";
+};
+
+&sdmmc {
+	status = "disabled";
+};
+
+&spi0 {
+	status = "disabled";
+};
+
+&usb_host0_ehci {
+	status = "disabled";
+};
+
+&usb_host1 {
+	status = "disabled";
+};
+
+&vcc50_hdmi {
+	enable-active-high;
+	gpio = <&gpio7 11 GPIO_ACTIVE_HIGH>;
+	pinctrl-names = "default";
+	pinctrl-0 = <&power_hdmi_on>;
+};
diff --git a/arch/arm/dts/rk3288-veyron-minnie.dts b/arch/arm/dts/rk3288-veyron-minnie.dts
new file mode 100644
index 0000000..0a2915f
--- /dev/null
+++ b/arch/arm/dts/rk3288-veyron-minnie.dts
@@ -0,0 +1,301 @@
+/*
+ * Google Veyron Minnie Rev 0+ board device tree source
+ *
+ * Copyright 2015 Google, Inc
+ *
+ * This file is dual-licensed: you can use it either under the terms
+ * of the GPL or the X11 license, at your option. Note that this dual
+ * licensing only applies to this file, and not this project as a
+ * whole.
+ *
+ *  a) This file is free software; you can redistribute it and/or
+ *     modify it under the terms of the GNU General Public License as
+ *     published by the Free Software Foundation; either version 2 of the
+ *     License, or (at your option) any later version.
+ *
+ *     This file is distributed in the hope that it will be useful,
+ *     but WITHOUT ANY WARRANTY; without even the implied warranty of
+ *     MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ *     GNU General Public License for more details.
+ *
+ *  Or, alternatively,
+ *
+ *  b) Permission is hereby granted, free of charge, to any person
+ *     obtaining a copy of this software and associated documentation
+ *     files (the "Software"), to deal in the Software without
+ *     restriction, including without limitation the rights to use,
+ *     copy, modify, merge, publish, distribute, sublicense, and/or
+ *     sell copies of the Software, and to permit persons to whom the
+ *     Software is furnished to do so, subject to the following
+ *     conditions:
+ *
+ *     The above copyright notice and this permission notice shall be
+ *     included in all copies or substantial portions of the Software.
+ *
+ *     THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND,
+ *     EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES
+ *     OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
+ *     NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT
+ *     HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY,
+ *     WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING
+ *     FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR
+ *     OTHER DEALINGS IN THE SOFTWARE.
+ */
+
+/dts-v1/;
+#include "rk3288-veyron-chromebook.dtsi"
+
+/ {
+	model = "Google Minnie";
+	compatible = "google,veyron-minnie-rev4", "google,veyron-minnie-rev3",
+		     "google,veyron-minnie-rev2", "google,veyron-minnie-rev1",
+		     "google,veyron-minnie-rev0", "google,veyron-minnie",
+		     "google,veyron", "rockchip,rk3288";
+
+	backlight_regulator: backlight-regulator {
+		compatible = "regulator-fixed";
+		enable-active-high;
+		gpio = <&gpio2 12 GPIO_ACTIVE_HIGH>;
+		pinctrl-names = "default";
+		pinctrl-0 = <&bl_pwr_en>;
+		regulator-name = "backlight_regulator";
+		vin-supply = <&vcc33_sys>;
+		startup-delay-us = <15000>;
+	};
+
+	panel_regulator: panel-regulator {
+		compatible = "regulator-fixed";
+		enable-active-high;
+		gpio = <&gpio7 14 GPIO_ACTIVE_HIGH>;
+		pinctrl-names = "default";
+		pinctrl-0 = <&lcd_enable_h>;
+		regulator-name = "panel_regulator";
+		startup-delay-us = <100000>;
+		vin-supply = <&vcc33_sys>;
+	};
+
+	vcc18_lcd: vcc18-lcd {
+		compatible = "regulator-fixed";
+		enable-active-high;
+		gpio = <&gpio2 13 GPIO_ACTIVE_HIGH>;
+		pinctrl-names = "default";
+		pinctrl-0 = <&avdd_1v8_disp_en>;
+		regulator-name = "vcc18_lcd";
+		regulator-always-on;
+		regulator-boot-on;
+		vin-supply = <&vcc18_wl>;
+	};
+};
+
+&backlight {
+	/* Minnie panel PWM must be >= 1%, so start non-zero brightness at 3 */
+	brightness-levels = <
+			  0   3   4   5   6   7
+			  8   9  10  11  12  13  14  15
+			 16  17  18  19  20  21  22  23
+			 24  25  26  27  28  29  30  31
+			 32  33  34  35  36  37  38  39
+			 40  41  42  43  44  45  46  47
+			 48  49  50  51  52  53  54  55
+			 56  57  58  59  60  61  62  63
+			 64  65  66  67  68  69  70  71
+			 72  73  74  75  76  77  78  79
+			 80  81  82  83  84  85  86  87
+			 88  89  90  91  92  93  94  95
+			 96  97  98  99 100 101 102 103
+			104 105 106 107 108 109 110 111
+			112 113 114 115 116 117 118 119
+			120 121 122 123 124 125 126 127
+			128 129 130 131 132 133 134 135
+			136 137 138 139 140 141 142 143
+			144 145 146 147 148 149 150 151
+			152 153 154 155 156 157 158 159
+			160 161 162 163 164 165 166 167
+			168 169 170 171 172 173 174 175
+			176 177 178 179 180 181 182 183
+			184 185 186 187 188 189 190 191
+			192 193 194 195 196 197 198 199
+			200 201 202 203 204 205 206 207
+			208 209 210 211 212 213 214 215
+			216 217 218 219 220 221 222 223
+			224 225 226 227 228 229 230 231
+			232 233 234 235 236 237 238 239
+			240 241 242 243 244 245 246 247
+			248 249 250 251 252 253 254 255>;
+	power-supply = <&backlight_regulator>;
+};
+
+&dmc {
+	rockchip,pctl-timing = <0x215 0xc8 0x0 0x35 0x26 0x2 0x70 0x2000d
+		0x6 0x0 0x8 0x4 0x17 0x24 0xd 0x6
+		0x4 0x8 0x4 0x76 0x4 0x0 0x30 0x0
+		0x1 0x2 0x2 0x4 0x0 0x0 0xc0 0x4
+		0x8 0x1f4>;
+	rockchip,phy-timing = <0x48d7dd93 0x187008d8 0x121076
+		0x0 0xc3 0x6 0x1>;
+	rockchip,sdram-params = <0x20d266a4 0x5b6 6 533000000 6 13 0>;
+};
+
+&emmc {
+	/delete-property/mmc-hs200-1_8v;
+};
+
+&gpio_keys {
+	pinctrl-0 = <&pwr_key_h &ap_lid_int_l &volum_down_l &volum_up_l>;
+
+	volum_down {
+		label = "Volum_down";
+		gpios = <&gpio5 11 GPIO_ACTIVE_LOW>;
+		linux,code = <KEY_VOLUMEDOWN>;
+		debounce-interval = <100>;
+	};
+
+	volum_up {
+		label = "Volum_up";
+		gpios = <&gpio5 10 GPIO_ACTIVE_LOW>;
+		linux,code = <KEY_VOLUMEUP>;
+		debounce-interval = <100>;
+	};
+};
+
+&i2c_tunnel {
+	battery: bq27500@55 {
+		compatible = "ti,bq27500";
+		reg = <0x55>;
+	};
+};
+
+&i2c3 {
+	status = "okay";
+
+	clock-frequency = <400000>;
+	i2c-scl-falling-time-ns = <50>;
+	i2c-scl-rising-time-ns = <300>;
+
+	touchscreen@10 {
+		compatible = "elan,ekth3500";
+		reg = <0x10>;
+		interrupt-parent = <&gpio2>;
+		interrupts = <14 IRQ_TYPE_EDGE_FALLING>;
+		pinctrl-names = "default";
+		pinctrl-0 = <&touch_int &touch_rst>;
+		reset-gpios = <&gpio2 15 GPIO_ACTIVE_LOW>;
+		vcc33-supply = <&vcc33_touch>;
+		vccio-supply = <&vcc33_touch>;
+	};
+};
+
+&panel {
+	compatible = "auo,b101ean01", "simple-panel";
+	power-supply= <&panel_regulator>;
+};
+
+&rk808 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pmic_int_l &dvs_1 &dvs_2>;
+
+	regulators {
+		vcc33_touch: LDO_REG2 {
+			regulator-min-microvolt = <3300000>;
+			regulator-max-microvolt = <3300000>;
+			regulator-name = "vcc33_touch";
+			regulator-state-mem {
+				regulator-off-in-suspend;
+			};
+		};
+
+		vcc5v_touch: SWITCH_REG2 {
+			regulator-name = "vcc5v_touch";
+			regulator-state-mem {
+				regulator-off-in-suspend;
+			};
+		};
+	};
+};
+
+&sdmmc {
+	disable-wp;
+	pinctrl-names = "default";
+	pinctrl-0 = <&sdmmc_clk &sdmmc_cmd &sdmmc_cd_disabled &sdmmc_cd_gpio
+			&sdmmc_bus4>;
+};
+
+&vcc_5v {
+	enable-active-high;
+	gpio = <&gpio7 21 GPIO_ACTIVE_HIGH>;
+	pinctrl-names = "default";
+	pinctrl-0 = <&drv_5v>;
+};
+
+&vcc50_hdmi {
+	enable-active-high;
+	gpio = <&gpio5 19 GPIO_ACTIVE_HIGH>;
+	pinctrl-names = "default";
+	pinctrl-0 = <&vcc50_hdmi_en>;
+};
+
+&pinctrl {
+	backlight {
+		bl_pwr_en: bl_pwr_en {
+			rockchip,pins = <2 12 RK_FUNC_GPIO &pcfg_pull_none>;
+		};
+	};
+
+	buck-5v {
+		drv_5v: drv-5v {
+			rockchip,pins = <7 21 RK_FUNC_GPIO &pcfg_pull_none>;
+		};
+	};
+
+	buttons {
+		volum_down_l: volum-down-l {
+			rockchip,pins = <5 11 RK_FUNC_GPIO &pcfg_pull_up>;
+		};
+
+		volum_up_l: volum-up-l {
+			rockchip,pins = <5 10 RK_FUNC_GPIO &pcfg_pull_up>;
+		};
+	};
+
+	hdmi {
+		vcc50_hdmi_en: vcc50-hdmi-en {
+			rockchip,pins = <5 19 RK_FUNC_GPIO &pcfg_pull_none>;
+		};
+	};
+
+	lcd {
+		lcd_enable_h: lcd-en {
+			rockchip,pins = <7 14 RK_FUNC_GPIO &pcfg_pull_none>;
+		};
+
+		avdd_1v8_disp_en: avdd-1v8-disp-en {
+			rockchip,pins = <2 13 RK_FUNC_GPIO &pcfg_pull_none>;
+		};
+	};
+
+	pmic {
+		dvs_1: dvs-1 {
+			rockchip,pins = <7 12 RK_FUNC_GPIO &pcfg_pull_down>;
+		};
+
+		dvs_2: dvs-2 {
+			rockchip,pins = <7 15 RK_FUNC_GPIO &pcfg_pull_down>;
+		};
+	};
+
+	prochot {
+		gpio_prochot: gpio-prochot {
+			rockchip,pins = <2 8 RK_FUNC_GPIO &pcfg_pull_none>;
+		};
+	};
+
+	touchscreen {
+		touch_int: touch-int {
+			rockchip,pins = <2 14 RK_FUNC_GPIO &pcfg_pull_none>;
+		};
+
+		touch_rst: touch-rst {
+			rockchip,pins = <2 15 RK_FUNC_GPIO &pcfg_pull_none>;
+		};
+	};
+};
diff --git a/arch/arm/dts/rk3288-veyron.dtsi b/arch/arm/dts/rk3288-veyron.dtsi
index 2ffe39c..a314058 100644
--- a/arch/arm/dts/rk3288-veyron.dtsi
+++ b/arch/arm/dts/rk3288-veyron.dtsi
@@ -245,14 +245,6 @@
 		533000 1150000
 		666000 1200000
 	>;
-	rockchip,pctl-timing = <0x29a 0xc8 0x1f4 0x42 0x4e 0x4 0xea 0xa
-		0x5 0x0 0xa 0x7 0x19 0x24 0xa 0x7
-		0x5 0xa 0x5 0x200 0x5 0x10 0x40 0x0
-		0x1 0x7 0x7 0x4 0xc 0x43 0x100 0x0
-		0x5 0x0>;
-	rockchip,phy-timing = <0x48f9aab4 0xea0910 0x1002c200
-		0xa60 0x40 0x10 0x0>;
-	rockchip,sdram-params = <0x30B25564 0x627 3 666000000 3 9 1>;
 };
 
 &efuse {
diff --git a/arch/arm/mach-rockchip/Kconfig b/arch/arm/mach-rockchip/Kconfig
index 8a5d62a..5c4a4c2 100644
--- a/arch/arm/mach-rockchip/Kconfig
+++ b/arch/arm/mach-rockchip/Kconfig
@@ -21,7 +21,7 @@
 	  including NEON and GPU, 1MB L2 cache, Mali-T7 graphics, two
 	  video interfaces supporting HDMI and eDP, several DDR3 options
 	  and video codec support. Peripherals include Gigabit Ethernet,
-	  USB2 host and OTG, SDIO, I2S, UART,s, SPI, I2C and PWMs.
+	  USB2 host and OTG, SDIO, I2S, UARTs, SPI, I2C and PWMs.
 
 config ROCKCHIP_RK3399
 	bool "Support Rockchip RK3399"
diff --git a/arch/arm/mach-rockchip/rk3288-board-spl.c b/arch/arm/mach-rockchip/rk3288-board-spl.c
index 0f40351..930939a 100644
--- a/arch/arm/mach-rockchip/rk3288-board-spl.c
+++ b/arch/arm/mach-rockchip/rk3288-board-spl.c
@@ -64,6 +64,10 @@
 	}
 
 fallback:
+#elif defined(CONFIG_TARGET_CHROMEBOOK_JERRY) || \
+		defined(CONFIG_TARGET_CHROMEBIT_MICKEY) || \
+		defined(CONFIG_TARGET_CHROMEBOOK_MINNIE)
+	return BOOT_DEVICE_SPI;
 #endif
 	return BOOT_DEVICE_MMC1;
 }
diff --git a/arch/arm/mach-rockchip/rk3288-board.c b/arch/arm/mach-rockchip/rk3288-board.c
index baf9522..bca6075 100644
--- a/arch/arm/mach-rockchip/rk3288-board.c
+++ b/arch/arm/mach-rockchip/rk3288-board.c
@@ -16,6 +16,8 @@
 #include <asm/arch/boot_mode.h>
 #include <asm/gpio.h>
 #include <dm/pinctrl.h>
+#include <dt-bindings/clock/rk3288-cru.h>
+#include <power/regulator.h>
 
 DECLARE_GLOBAL_DATA_PTR;
 
@@ -56,6 +58,39 @@
 	return rk_board_late_init();
 }
 
+#ifndef CONFIG_ROCKCHIP_SPL_BACK_TO_BROM
+static int veyron_init(void)
+{
+	struct udevice *dev;
+	struct clk clk;
+	int ret;
+
+	ret = regulator_get_by_platname("vdd_arm", &dev);
+	if (ret)
+		return ret;
+
+	/* Slowly raise to max CPU voltage to prevent overshoot */
+	ret = regulator_set_value(dev, 1200000);
+	if (ret)
+		return ret;
+	udelay(175); /* Must wait for voltage to stabilize, 2mV/us */
+	ret = regulator_set_value(dev, 1400000);
+	if (ret)
+		return ret;
+	udelay(100); /* Must wait for voltage to stabilize, 2mV/us */
+
+	ret = rockchip_get_clk(&clk.dev);
+	if (ret)
+		return ret;
+	clk.id = PLL_APLL;
+	ret = clk_set_rate(&clk, 1800000000);
+	if (IS_ERR_VALUE(ret))
+		return ret;
+
+	return 0;
+}
+#endif
+
 int board_init(void)
 {
 #ifdef CONFIG_ROCKCHIP_SPL_BACK_TO_BROM
@@ -87,6 +122,15 @@
 
 	return -1;
 #else
+	int ret;
+
+	/* We do some SoC one time setting here */
+	if (!fdt_node_check_compatible(gd->fdt_blob, 0, "google,veyron")) {
+		ret = veyron_init();
+		if (ret)
+			return ret;
+	}
+
 	return 0;
 #endif
 }
diff --git a/arch/arm/mach-rockchip/rk3288/Kconfig b/arch/arm/mach-rockchip/rk3288/Kconfig
index c53d2e2..223ae41 100644
--- a/arch/arm/mach-rockchip/rk3288/Kconfig
+++ b/arch/arm/mach-rockchip/rk3288/Kconfig
@@ -49,6 +49,25 @@
 	  WiFi. It includes a Chrome OS EC (Cortex-M3) to provide access to
 	  the keyboard and battery functions.
 
+config TARGET_CHROMEBIT_MICKEY
+	bool "Google/Rockchip Veyron-Mickey Chromebit"
+	help
+	  Mickey is a small RK3288-based device with one USB 3.0 port, HDMI
+	  and WiFi. It has a separate power port and is designed to connect
+	  to the HDMI input of a monitor or TV. It has no internal battery.
+	  Typically a USB hub or wireless keyboard/touchpad is used to get
+	  keyboard and mouse access.
+
+config TARGET_CHROMEBOOK_MINNIE
+	bool "Google/Rockchip Veyron-Minnie Chromebook"
+	help
+	  Jerry is a RK3288-based convertible clamshell device with 2 USB 3.0
+	  ports, micro HDMI, a 10.1-inch 1280x800 EDP display, micro-SD card,
+	  HD camera, touchpad, WiFi and Bluetooth. It includes a Chrome OS
+	  EC (Cortex-M3) to provide access to the keyboard and battery
+	  functions. It includes 2 or 4GB of SDRAM and 16 or 32GB of
+	  internal MMC. The product name is ASUS Chromebook Flip.
+
 config TARGET_ROCK2
 	bool "Radxa Rock 2"
 	help
@@ -88,7 +107,7 @@
 
 source "board/firefly/firefly-rk3288/Kconfig"
 
-source "board/google/chromebook_jerry/Kconfig"
+source "board/google/veyron/Kconfig"
 
 source "board/radxa/rock2/Kconfig"
 
diff --git a/board/google/chromebook_jerry/Kconfig b/board/google/chromebook_jerry/Kconfig
deleted file mode 100644
index 3640513..0000000
--- a/board/google/chromebook_jerry/Kconfig
+++ /dev/null
@@ -1,15 +0,0 @@
-if TARGET_CHROMEBOOK_JERRY
-
-config SYS_BOARD
-	default "chromebook_jerry"
-
-config SYS_VENDOR
-	default "google"
-
-config SYS_CONFIG_NAME
-	default "chromebook_jerry"
-
-config BOARD_SPECIFIC_OPTIONS # dummy
-	def_bool y
-
-endif
diff --git a/board/google/chromebook_jerry/MAINTAINERS b/board/google/chromebook_jerry/MAINTAINERS
deleted file mode 100644
index b01b6cd..0000000
--- a/board/google/chromebook_jerry/MAINTAINERS
+++ /dev/null
@@ -1,6 +0,0 @@
-CHROMEBOOK JERRY BOARD
-M:	Simon Glass <sjg@chromium.org>
-S:	Maintained
-F:	board/google/chromebook_jerry/
-F:	include/configs/chromebook_jerry.h
-F:	configs/chromebook_jerry_defconfig
diff --git a/board/google/chromebook_jerry/jerry.c b/board/google/chromebook_jerry/jerry.c
deleted file mode 100644
index 5119e95..0000000
--- a/board/google/chromebook_jerry/jerry.c
+++ /dev/null
@@ -1,7 +0,0 @@
-/*
- * (C) Copyright 2015 Google, Inc
- *
- * SPDX-License-Identifier:     GPL-2.0+
- */
-
-#include <common.h>
diff --git a/board/google/veyron/Kconfig b/board/google/veyron/Kconfig
new file mode 100644
index 0000000..770e9aa
--- /dev/null
+++ b/board/google/veyron/Kconfig
@@ -0,0 +1,47 @@
+if TARGET_CHROMEBOOK_JERRY
+
+config SYS_BOARD
+	default "veyron"
+
+config SYS_VENDOR
+	default "google"
+
+config SYS_CONFIG_NAME
+	default "veyron"
+
+config BOARD_SPECIFIC_OPTIONS # dummy
+	def_bool y
+
+endif
+
+if TARGET_CHROMEBIT_MICKEY
+
+config SYS_BOARD
+	default "veyron"
+
+config SYS_VENDOR
+	default "google"
+
+config SYS_CONFIG_NAME
+	default "veyron"
+
+config BOARD_SPECIFIC_OPTIONS # dummy
+	def_bool y
+
+endif
+
+if TARGET_CHROMEBOOK_MINNIE
+
+config SYS_BOARD
+	default "veyron"
+
+config SYS_VENDOR
+	default "google"
+
+config SYS_CONFIG_NAME
+	default "veyron"
+
+config BOARD_SPECIFIC_OPTIONS # dummy
+	def_bool y
+
+endif
diff --git a/board/google/veyron/MAINTAINERS b/board/google/veyron/MAINTAINERS
new file mode 100644
index 0000000..d582cb0
--- /dev/null
+++ b/board/google/veyron/MAINTAINERS
@@ -0,0 +1,20 @@
+CHROMEBOOK JERRY BOARD
+M:	Simon Glass <sjg@chromium.org>
+S:	Maintained
+F:	board/google/veyron/
+F:	include/configs/veyron.h
+F:	configs/chromebook_jerry_defconfig
+
+CHROMEBIT MICKEY BOARD
+M:	Simon Glass <sjg@chromium.org>
+S:	Maintained
+F:	board/google/veyron/
+F:	include/configs/veyron.h
+F:	configs/chromebit_mickey_defconfig
+
+CHROMEBIT MINNIE BOARD
+M:	Simon Glass <sjg@chromium.org>
+S:	Maintained
+F:	board/google/veyron/
+F:	include/configs/veyron.h
+F:	configs/chromebit_minnie_defconfig
diff --git a/board/google/chromebook_jerry/Makefile b/board/google/veyron/Makefile
similarity index 81%
rename from board/google/chromebook_jerry/Makefile
rename to board/google/veyron/Makefile
index d29a063..9868357 100644
--- a/board/google/chromebook_jerry/Makefile
+++ b/board/google/veyron/Makefile
@@ -4,4 +4,4 @@
 # SPDX-License-Identifier:     GPL-2.0+
 #
 
-obj-y	+= jerry.o
+obj-y	+= veyron.o
diff --git a/board/google/veyron/veyron.c b/board/google/veyron/veyron.c
new file mode 100644
index 0000000..20297e1
--- /dev/null
+++ b/board/google/veyron/veyron.c
@@ -0,0 +1,13 @@
+/*
+ * (C) Copyright 2015 Google, Inc
+ *
+ * SPDX-License-Identifier:     GPL-2.0+
+ */
+
+#include <common.h>
+
+/*
+ * We should increase the DDR voltage to 1.2V using the PWM regulator.
+ * There is a U-Boot driver for this but it may need to add support for the
+ * 'voltage-table' property.
+ */
diff --git a/board/rockchip/evb_rk3399/evb-rk3399.c b/board/rockchip/evb_rk3399/evb-rk3399.c
index c6e6cd3..c437f1b 100644
--- a/board/rockchip/evb_rk3399/evb-rk3399.c
+++ b/board/rockchip/evb_rk3399/evb-rk3399.c
@@ -71,5 +71,5 @@
 {
 	/* Reserve 0x200000 for ATF bl31 */
 	gd->bd->bi_dram[0].start = 0x200000;
-	gd->bd->bi_dram[0].size = 0x80000000;
+	gd->bd->bi_dram[0].size = 0x7e000000;
 }
diff --git a/cmd/regulator.c b/cmd/regulator.c
index bfea6e0..2ef5bc9 100644
--- a/cmd/regulator.c
+++ b/cmd/regulator.c
@@ -292,7 +292,10 @@
 		return CMD_RET_FAILURE;
 	}
 
-	ret = regulator_set_value(dev, value);
+	if (!force)
+		ret = regulator_set_value(dev, value);
+	else
+		ret = regulator_set_value_force(dev, value);
 	if (ret) {
 		printf("Regulator: %s - can't set the Voltage!\n",
 		       uc_pdata->name);
diff --git a/common/stdio.c b/common/stdio.c
index 8e4a9be..4d30017 100644
--- a/common/stdio.c
+++ b/common/stdio.c
@@ -151,9 +151,10 @@
 	*sdevp = NULL;
 	seq = trailing_strtoln(name, NULL);
 	if (seq == -1)
+		seq = 0;
+	ret = uclass_get_device_by_seq(id, seq, &dev);
+	if (ret == -ENODEV)
 		ret = uclass_first_device_err(id, &dev);
-	else
-		ret = uclass_get_device_by_seq(id, seq, &dev);
 	if (ret) {
 		debug("No %s device for seq %d (%s)\n", uclass_get_name(id),
 		      seq, name);
@@ -173,12 +174,12 @@
 }
 #endif
 
-struct stdio_dev* stdio_get_by_name(const char *name)
+struct stdio_dev *stdio_get_by_name(const char *name)
 {
 	struct list_head *pos;
 	struct stdio_dev *sdev;
 
-	if(!name)
+	if (!name)
 		return NULL;
 
 	list_for_each(pos, &(devs.list)) {
diff --git a/configs/chromebit_mickey_defconfig b/configs/chromebit_mickey_defconfig
new file mode 100644
index 0000000..b118907
--- /dev/null
+++ b/configs/chromebit_mickey_defconfig
@@ -0,0 +1,84 @@
+CONFIG_ARM=y
+CONFIG_ARCH_ROCKCHIP=y
+CONFIG_SYS_MALLOC_F_LEN=0x2000
+# CONFIG_SPL_MMC_SUPPORT is not set
+CONFIG_ROCKCHIP_RK3288=y
+CONFIG_TARGET_CHROMEBIT_MICKEY=y
+CONFIG_SPL_SPI_FLASH_SUPPORT=y
+CONFIG_SPL_SPI_SUPPORT=y
+CONFIG_SPL_STACK_R_ADDR=0x80000
+CONFIG_DM_KEYBOARD=y
+CONFIG_DEFAULT_DEVICE_TREE="rk3288-veyron-mickey"
+# CONFIG_DISPLAY_CPUINFO is not set
+CONFIG_SPL_STACK_R=y
+CONFIG_SPL_STACK_R_MALLOC_SIMPLE_LEN=0x2000
+CONFIG_HUSH_PARSER=y
+CONFIG_CMD_BOOTZ=y
+# CONFIG_CMD_IMLS is not set
+CONFIG_CMD_MMC=y
+CONFIG_CMD_SF=y
+CONFIG_CMD_SPI=y
+CONFIG_CMD_I2C=y
+CONFIG_CMD_GPIO=y
+# CONFIG_CMD_SETEXPR is not set
+CONFIG_CMD_DHCP=y
+CONFIG_CMD_MII=y
+CONFIG_CMD_PING=y
+CONFIG_CMD_CACHE=y
+CONFIG_CMD_TIME=y
+CONFIG_CMD_PMIC=y
+CONFIG_CMD_REGULATOR=y
+CONFIG_CMD_EXT2=y
+CONFIG_CMD_EXT4=y
+CONFIG_CMD_FAT=y
+CONFIG_CMD_FS_GENERIC=y
+CONFIG_SPL_OF_CONTROL=y
+CONFIG_OF_SPL_REMOVE_PROPS="pinctrl-0 pinctrl-names clock-names interrupt-parent assigned-clocks assigned-clock-rates assigned-clock-parents"
+CONFIG_REGMAP=y
+CONFIG_SPL_REGMAP=y
+CONFIG_SYSCON=y
+CONFIG_SPL_SYSCON=y
+# CONFIG_SPL_SIMPLE_BUS is not set
+CONFIG_CLK=y
+CONFIG_SPL_CLK=y
+CONFIG_ROCKCHIP_GPIO=y
+CONFIG_I2C_CROS_EC_TUNNEL=y
+CONFIG_SYS_I2C_ROCKCHIP=y
+CONFIG_I2C_MUX=y
+CONFIG_CROS_EC_KEYB=y
+CONFIG_CMD_CROS_EC=y
+CONFIG_CROS_EC=y
+CONFIG_CROS_EC_SPI=y
+CONFIG_PWRSEQ=y
+CONFIG_ROCKCHIP_DWMMC=y
+CONFIG_PINCTRL=y
+CONFIG_SPL_PINCTRL=y
+# CONFIG_SPL_PINCTRL_FULL is not set
+CONFIG_ROCKCHIP_RK3288_PINCTRL=y
+CONFIG_DM_PMIC=y
+# CONFIG_SPL_PMIC_CHILDREN is not set
+CONFIG_PMIC_RK808=y
+CONFIG_DM_REGULATOR=y
+CONFIG_SPL_DM_REGULATOR=y
+CONFIG_DM_REGULATOR_FIXED=y
+CONFIG_REGULATOR_RK808=y
+CONFIG_DM_PWM=y
+CONFIG_PWM_ROCKCHIP=y
+CONFIG_RAM=y
+CONFIG_SPL_RAM=y
+CONFIG_DEBUG_UART=y
+CONFIG_DEBUG_UART_BASE=0xff690000
+CONFIG_DEBUG_UART_CLOCK=24000000
+CONFIG_DEBUG_UART_SHIFT=2
+CONFIG_SYS_NS16550=y
+CONFIG_ROCKCHIP_SERIAL=y
+CONFIG_ROCKCHIP_SPI=y
+CONFIG_SYSRESET=y
+CONFIG_DM_VIDEO=y
+CONFIG_DISPLAY=y
+CONFIG_VIDEO_ROCKCHIP=y
+CONFIG_USE_TINY_PRINTF=y
+CONFIG_CMD_DHRYSTONE=y
+CONFIG_ERRNO_STR=y
+CONFIG_SPL_OF_PLATDATA=y
+# CONFIG_SPL_OF_LIBFDT is not set
diff --git a/configs/chromebook_jerry_defconfig b/configs/chromebook_jerry_defconfig
index 876adc4..46df1a6 100644
--- a/configs/chromebook_jerry_defconfig
+++ b/configs/chromebook_jerry_defconfig
@@ -1,16 +1,13 @@
 CONFIG_ARM=y
 CONFIG_ARCH_ROCKCHIP=y
 CONFIG_SYS_MALLOC_F_LEN=0x2000
-CONFIG_SPL_I2C_SUPPORT=y
 # CONFIG_SPL_MMC_SUPPORT is not set
-CONFIG_SPL_POWER_SUPPORT=y
 CONFIG_ROCKCHIP_RK3288=y
 CONFIG_TARGET_CHROMEBOOK_JERRY=y
-CONFIG_ROCKCHIP_FAST_SPL=y
 CONFIG_SPL_SPI_FLASH_SUPPORT=y
 CONFIG_SPL_SPI_SUPPORT=y
 CONFIG_SPL_STACK_R_ADDR=0x80000
-CONFIG_DEFAULT_DEVICE_TREE="rk3288-jerry"
+CONFIG_DEFAULT_DEVICE_TREE="rk3288-veyron-jerry"
 CONFIG_SILENT_CONSOLE=y
 # CONFIG_DISPLAY_CPUINFO is not set
 CONFIG_SPL_STACK_R=y
@@ -36,7 +33,7 @@
 CONFIG_CMD_FAT=y
 CONFIG_CMD_FS_GENERIC=y
 CONFIG_SPL_OF_CONTROL=y
-CONFIG_OF_SPL_REMOVE_PROPS="pinctrl-0 pinctrl-names clock-names interrupt-parent"
+CONFIG_OF_SPL_REMOVE_PROPS="pinctrl-0 pinctrl-names clock-names interrupt-parent assigned-clocks assigned-clock-rates assigned-clock-parents"
 CONFIG_REGMAP=y
 CONFIG_SPL_REGMAP=y
 CONFIG_SYSCON=y
@@ -71,6 +68,7 @@
 CONFIG_DEBUG_UART_CLOCK=24000000
 CONFIG_DEBUG_UART_SHIFT=2
 CONFIG_SYS_NS16550=y
+CONFIG_ROCKCHIP_SERIAL=y
 CONFIG_ROCKCHIP_SPI=y
 CONFIG_SYSRESET=y
 CONFIG_DM_VIDEO=y
@@ -80,3 +78,5 @@
 CONFIG_USE_TINY_PRINTF=y
 CONFIG_CMD_DHRYSTONE=y
 CONFIG_ERRNO_STR=y
+CONFIG_SPL_OF_PLATDATA=y
+# CONFIG_SPL_OF_LIBFDT is not set
diff --git a/configs/chromebook_minnie_defconfig b/configs/chromebook_minnie_defconfig
new file mode 100644
index 0000000..6aced14
--- /dev/null
+++ b/configs/chromebook_minnie_defconfig
@@ -0,0 +1,82 @@
+CONFIG_ARM=y
+CONFIG_ARCH_ROCKCHIP=y
+CONFIG_SYS_MALLOC_F_LEN=0x2000
+# CONFIG_SPL_MMC_SUPPORT is not set
+CONFIG_ROCKCHIP_RK3288=y
+CONFIG_TARGET_CHROMEBOOK_MINNIE=y
+CONFIG_SPL_SPI_FLASH_SUPPORT=y
+CONFIG_SPL_SPI_SUPPORT=y
+CONFIG_SPL_STACK_R_ADDR=0x80000
+CONFIG_DEFAULT_DEVICE_TREE="rk3288-veyron-minnie"
+CONFIG_SILENT_CONSOLE=y
+# CONFIG_DISPLAY_CPUINFO is not set
+CONFIG_SPL_STACK_R=y
+CONFIG_SPL_STACK_R_MALLOC_SIMPLE_LEN=0x2000
+CONFIG_HUSH_PARSER=y
+CONFIG_CMD_BOOTZ=y
+# CONFIG_CMD_IMLS is not set
+CONFIG_CMD_MMC=y
+CONFIG_CMD_SF=y
+CONFIG_CMD_SPI=y
+CONFIG_CMD_I2C=y
+CONFIG_CMD_GPIO=y
+# CONFIG_CMD_SETEXPR is not set
+CONFIG_CMD_DHCP=y
+CONFIG_CMD_MII=y
+CONFIG_CMD_PING=y
+CONFIG_CMD_CACHE=y
+CONFIG_CMD_TIME=y
+CONFIG_CMD_PMIC=y
+CONFIG_CMD_REGULATOR=y
+CONFIG_CMD_EXT2=y
+CONFIG_CMD_EXT4=y
+CONFIG_CMD_FAT=y
+CONFIG_CMD_FS_GENERIC=y
+CONFIG_SPL_OF_CONTROL=y
+CONFIG_OF_SPL_REMOVE_PROPS="pinctrl-0 pinctrl-names clock-names interrupt-parent assigned-clocks assigned-clock-rates assigned-clock-parents"
+CONFIG_REGMAP=y
+CONFIG_SPL_REGMAP=y
+CONFIG_SYSCON=y
+CONFIG_SPL_SYSCON=y
+# CONFIG_SPL_SIMPLE_BUS is not set
+CONFIG_CLK=y
+CONFIG_SPL_CLK=y
+CONFIG_ROCKCHIP_GPIO=y
+CONFIG_I2C_CROS_EC_TUNNEL=y
+CONFIG_SYS_I2C_ROCKCHIP=y
+CONFIG_I2C_MUX=y
+CONFIG_DM_KEYBOARD=y
+CONFIG_CROS_EC_KEYB=y
+CONFIG_CROS_EC=y
+CONFIG_CROS_EC_SPI=y
+CONFIG_PWRSEQ=y
+CONFIG_ROCKCHIP_DWMMC=y
+CONFIG_PINCTRL=y
+CONFIG_SPL_PINCTRL=y
+# CONFIG_SPL_PINCTRL_FULL is not set
+CONFIG_ROCKCHIP_RK3288_PINCTRL=y
+CONFIG_DM_PMIC=y
+# CONFIG_SPL_PMIC_CHILDREN is not set
+CONFIG_PMIC_RK808=y
+CONFIG_DM_REGULATOR_FIXED=y
+CONFIG_REGULATOR_RK808=y
+CONFIG_PWM_ROCKCHIP=y
+CONFIG_RAM=y
+CONFIG_SPL_RAM=y
+CONFIG_DEBUG_UART=y
+CONFIG_DEBUG_UART_BASE=0xff690000
+CONFIG_DEBUG_UART_CLOCK=24000000
+CONFIG_DEBUG_UART_SHIFT=2
+CONFIG_SYS_NS16550=y
+CONFIG_ROCKCHIP_SERIAL=y
+CONFIG_ROCKCHIP_SPI=y
+CONFIG_SYSRESET=y
+CONFIG_DM_VIDEO=y
+CONFIG_DISPLAY=y
+CONFIG_VIDEO_ROCKCHIP=y
+CONFIG_CONSOLE_SCROLL_LINES=10
+CONFIG_USE_TINY_PRINTF=y
+CONFIG_CMD_DHRYSTONE=y
+CONFIG_ERRNO_STR=y
+CONFIG_SPL_OF_PLATDATA=y
+# CONFIG_SPL_OF_LIBFDT is not set
diff --git a/configs/evb-rk3399_defconfig b/configs/evb-rk3399_defconfig
index e3edeb7..40a8295 100644
--- a/configs/evb-rk3399_defconfig
+++ b/configs/evb-rk3399_defconfig
@@ -24,6 +24,7 @@
 CONFIG_ROCKCHIP_SDHCI=y
 CONFIG_PINCTRL=y
 CONFIG_ROCKCHIP_RK3399_PINCTRL=y
+CONFIG_PWM_ROCKCHIP=y
 CONFIG_REGULATOR_PWM=y
 CONFIG_DM_REGULATOR_FIXED=y
 CONFIG_RAM=y
diff --git a/configs/kylin-rk3036_defconfig b/configs/kylin-rk3036_defconfig
index 424cdab..631d1f5 100644
--- a/configs/kylin-rk3036_defconfig
+++ b/configs/kylin-rk3036_defconfig
@@ -32,7 +32,11 @@
 CONFIG_ROCKCHIP_DWMMC=y
 CONFIG_PINCTRL=y
 CONFIG_ROCKCHIP_RK3036_PINCTRL=y
+CONFIG_DM_REGULATOR_FIXED=y
 CONFIG_RAM=y
 CONFIG_SYSRESET=y
 CONFIG_CMD_DHRYSTONE=y
 CONFIG_ERRNO_STR=y
+CONFIG_CMD_USB=y
+CONFIG_USB=y
+CONFIG_USB_STORAGE=y
diff --git a/drivers/clk/rockchip/clk_rk3288.c b/drivers/clk/rockchip/clk_rk3288.c
index ed97e87..d15504c 100644
--- a/drivers/clk/rockchip/clk_rk3288.c
+++ b/drivers/clk/rockchip/clk_rk3288.c
@@ -691,6 +691,13 @@
 
 	gclk_rate = rkclk_pll_get_rate(priv->cru, CLK_GENERAL);
 	switch (clk->id) {
+	case PLL_APLL:
+		/* We only support a fixed rate here */
+		if (rate != 1800000000)
+			return -EINVAL;
+		rk3288_clk_configure_cpu(priv->cru, priv->grf);
+		new_rate = rate;
+		break;
 	case CLK_DDR:
 		new_rate = rkclk_configure_ddr(priv->cru, priv->grf, rate);
 		break;
diff --git a/drivers/mtd/spi/spi_flash.c b/drivers/mtd/spi/spi_flash.c
index 2576c2c..94c0b00 100644
--- a/drivers/mtd/spi/spi_flash.c
+++ b/drivers/mtd/spi/spi_flash.c
@@ -1138,7 +1138,7 @@
 		return ret;
 #endif
 
-#if CONFIG_IS_ENABLED(OF_CONTROL)
+#if CONFIG_IS_ENABLED(OF_CONTROL) && !CONFIG_IS_ENABLED(OF_PLATDATA)
 	ret = spi_flash_decode_fdt(gd->fdt_blob, flash);
 	if (ret) {
 		debug("SF: FDT decode error\n");
diff --git a/drivers/power/regulator/regulator-uclass.c b/drivers/power/regulator/regulator-uclass.c
index 4434e36..52a1070 100644
--- a/drivers/power/regulator/regulator-uclass.c
+++ b/drivers/power/regulator/regulator-uclass.c
@@ -41,6 +41,13 @@
 int regulator_set_value(struct udevice *dev, int uV)
 {
 	const struct dm_regulator_ops *ops = dev_get_driver_ops(dev);
+	struct dm_regulator_uclass_platdata *uc_pdata;
+
+	uc_pdata = dev_get_uclass_platdata(dev);
+	if (uc_pdata->min_uV != -ENODATA && uV < uc_pdata->min_uV)
+		return -EINVAL;
+	if (uc_pdata->max_uV != -ENODATA && uV > uc_pdata->max_uV)
+		return -EINVAL;
 
 	if (!ops || !ops->set_value)
 		return -ENOSYS;
@@ -48,6 +55,20 @@
 	return ops->set_value(dev, uV);
 }
 
+/*
+ * To be called with at most caution as there is no check
+ * before setting the actual voltage value.
+ */
+int regulator_set_value_force(struct udevice *dev, int uV)
+{
+	const struct dm_regulator_ops *ops = dev_get_driver_ops(dev);
+
+	if (!ops || !ops->set_value)
+		return -ENOSYS;
+
+	return ops->set_value(dev, uV);
+}
+
 int regulator_get_current(struct udevice *dev)
 {
 	const struct dm_regulator_ops *ops = dev_get_driver_ops(dev);
@@ -61,6 +82,13 @@
 int regulator_set_current(struct udevice *dev, int uA)
 {
 	const struct dm_regulator_ops *ops = dev_get_driver_ops(dev);
+	struct dm_regulator_uclass_platdata *uc_pdata;
+
+	uc_pdata = dev_get_uclass_platdata(dev);
+	if (uc_pdata->min_uA != -ENODATA && uA < uc_pdata->min_uA)
+		return -EINVAL;
+	if (uc_pdata->max_uA != -ENODATA && uA > uc_pdata->max_uA)
+		return -EINVAL;
 
 	if (!ops || !ops->set_current)
 		return -ENOSYS;
diff --git a/drivers/spi/rk_spi.c b/drivers/spi/rk_spi.c
index 105ee4a..15cf0bd 100644
--- a/drivers/spi/rk_spi.c
+++ b/drivers/spi/rk_spi.c
@@ -12,6 +12,7 @@
 #include <common.h>
 #include <clk.h>
 #include <dm.h>
+#include <dt-structs.h>
 #include <errno.h>
 #include <spi.h>
 #include <linux/errno.h>
@@ -27,6 +28,9 @@
 #define DEBUG_RK_SPI	0
 
 struct rockchip_spi_platdata {
+#if CONFIG_IS_ENABLED(OF_PLATDATA)
+	struct dtd_rockchip_rk3288_spi of_plat;
+#endif
 	s32 frequency;		/* Default clock frequency, -1 for none */
 	fdt_addr_t base;
 	uint deactivate_delay_us;	/* Delay to wait after deactivate */
@@ -106,6 +110,14 @@
 	struct rockchip_spi_priv *priv = dev_get_priv(bus);
 	struct rockchip_spi *regs = priv->regs;
 
+	/* If it's too soon to do another transaction, wait */
+	if (plat->deactivate_delay_us && priv->last_transaction_us) {
+		ulong delay_us;		/* The delay completed so far */
+		delay_us = timer_get_us() - priv->last_transaction_us;
+		if (delay_us < plat->deactivate_delay_us)
+			udelay(plat->deactivate_delay_us - delay_us);
+	}
+
 	debug("activate cs%u\n", cs);
 	writel(1 << cs, &regs->ser);
 	if (plat->activate_delay_us)
@@ -127,9 +139,29 @@
 		priv->last_transaction_us = timer_get_us();
 }
 
+#if CONFIG_IS_ENABLED(OF_PLATDATA)
+static int conv_of_platdata(struct udevice *dev)
+{
+	struct rockchip_spi_platdata *plat = dev->platdata;
+	struct dtd_rockchip_rk3288_spi *dtplat = &plat->of_plat;
+	struct rockchip_spi_priv *priv = dev_get_priv(dev);
+	int ret;
+
+	plat->base = dtplat->reg[0];
+	plat->frequency = 20000000;
+	ret = clk_get_by_index_platdata(dev, 0, dtplat->clocks, &priv->clk);
+	if (ret < 0)
+		return ret;
+	dev->req_seq = 0;
+
+	return 0;
+}
+#endif
+
 static int rockchip_spi_ofdata_to_platdata(struct udevice *bus)
 {
-	struct rockchip_spi_platdata *plat = bus->platdata;
+#if !CONFIG_IS_ENABLED(OF_PLATDATA)
+	struct rockchip_spi_platdata *plat = dev_get_platdata(bus);
 	struct rockchip_spi_priv *priv = dev_get_priv(bus);
 	const void *blob = gd->fdt_blob;
 	int node = bus->of_offset;
@@ -153,6 +185,7 @@
 	debug("%s: base=%x, max-frequency=%d, deactivate_delay=%d\n",
 	      __func__, (uint)plat->base, plat->frequency,
 	      plat->deactivate_delay_us);
+#endif
 
 	return 0;
 }
@@ -164,6 +197,11 @@
 	int ret;
 
 	debug("%s: probe\n", __func__);
+#if CONFIG_IS_ENABLED(OF_PLATDATA)
+	ret = conv_of_platdata(bus);
+	if (ret)
+		return ret;
+#endif
 	priv->regs = (struct rockchip_spi *)plat->base;
 
 	priv->last_transaction_us = timer_get_us();
@@ -369,7 +407,11 @@
 };
 
 U_BOOT_DRIVER(rockchip_spi) = {
+#if CONFIG_IS_ENABLED(OF_PLATDATA)
+	.name	= "rockchip_rk3288_spi",
+#else
 	.name	= "rockchip_spi",
+#endif
 	.id	= UCLASS_SPI,
 	.of_match = rockchip_spi_ids,
 	.ops	= &rockchip_spi_ops,
diff --git a/drivers/spi/spi-uclass.c b/drivers/spi/spi-uclass.c
index d9c49e4..f59a701 100644
--- a/drivers/spi/spi-uclass.c
+++ b/drivers/spi/spi-uclass.c
@@ -108,6 +108,7 @@
 	return dm_spi_xfer(slave->dev, bitlen, dout, din, flags);
 }
 
+#if !CONFIG_IS_ENABLED(OF_PLATDATA)
 static int spi_child_post_bind(struct udevice *dev)
 {
 	struct dm_spi_slave_platdata *plat = dev_get_parent_platdata(dev);
@@ -117,14 +118,16 @@
 
 	return spi_slave_ofdata_to_platdata(gd->fdt_blob, dev->of_offset, plat);
 }
+#endif
 
 static int spi_post_probe(struct udevice *bus)
 {
+#if !CONFIG_IS_ENABLED(OF_PLATDATA)
 	struct dm_spi_bus *spi = dev_get_uclass_priv(bus);
 
 	spi->max_hz = fdtdec_get_int(gd->fdt_blob, bus->of_offset,
 				     "spi-max-frequency", 0);
-
+#endif
 #if defined(CONFIG_NEEDS_MANUAL_RELOC)
 	struct dm_spi_ops *ops = spi_get_ops(bus);
 
@@ -274,7 +277,11 @@
 	bool created = false;
 	int ret;
 
+#if CONFIG_IS_ENABLED(OF_PLATDATA)
+	ret = uclass_first_device_err(UCLASS_SPI, &bus);
+#else
 	ret = uclass_get_device_by_seq(UCLASS_SPI, busnum, &bus);
+#endif
 	if (ret) {
 		printf("Invalid bus %d (err=%d)\n", busnum, ret);
 		return ret;
@@ -290,8 +297,11 @@
 		debug("%s: Binding new device '%s', busnum=%d, cs=%d, driver=%s\n",
 		      __func__, dev_name, busnum, cs, drv_name);
 		ret = device_bind_driver(bus, drv_name, dev_name, &dev);
-		if (ret)
+		if (ret) {
+			debug("%s: Unable to bind driver (ret=%d)\n", __func__,
+			      ret);
 			return ret;
+		}
 		plat = dev_get_parent_platdata(dev);
 		plat->cs = cs;
 		plat->max_hz = speed;
@@ -436,14 +446,18 @@
 	.id		= UCLASS_SPI,
 	.name		= "spi",
 	.flags		= DM_UC_FLAG_SEQ_ALIAS,
+#if !CONFIG_IS_ENABLED(OF_PLATDATA)
 	.post_bind	= dm_scan_fdt_dev,
+#endif
 	.post_probe	= spi_post_probe,
 	.child_pre_probe = spi_child_pre_probe,
 	.per_device_auto_alloc_size = sizeof(struct dm_spi_bus),
 	.per_child_auto_alloc_size = sizeof(struct spi_slave),
 	.per_child_platdata_auto_alloc_size =
 			sizeof(struct dm_spi_slave_platdata),
+#if !CONFIG_IS_ENABLED(OF_PLATDATA)
 	.child_post_bind = spi_child_post_bind,
+#endif
 };
 
 UCLASS_DRIVER(spi_generic) = {
diff --git a/drivers/video/display-uclass.c b/drivers/video/display-uclass.c
index e4763de..e752eb0 100644
--- a/drivers/video/display-uclass.c
+++ b/drivers/video/display-uclass.c
@@ -23,10 +23,19 @@
 			const struct display_timing *timing)
 {
 	struct dm_display_ops *ops = display_get_ops(dev);
+	struct display_plat *disp_uc_plat;
+	int ret;
 
 	if (!ops || !ops->enable)
 		return -ENOSYS;
-	return ops->enable(dev, panel_bpp, timing);
+	ret = ops->enable(dev, panel_bpp, timing);
+	if (ret)
+		return ret;
+
+	disp_uc_plat = dev_get_uclass_platdata(dev);
+	disp_uc_plat->in_use = true;
+
+	return 0;
 }
 
 int display_read_timing(struct udevice *dev, struct display_timing *timing)
@@ -48,6 +57,13 @@
 	return edid_get_timing(buf, ret, timing, &panel_bits_per_colour);
 }
 
+bool display_in_use(struct udevice *dev)
+{
+	struct display_plat *disp_uc_plat = dev_get_uclass_platdata(dev);
+
+	return disp_uc_plat->in_use;
+}
+
 UCLASS_DRIVER(display) = {
 	.id		= UCLASS_DISPLAY,
 	.name		= "display",
diff --git a/drivers/video/rockchip/rk_hdmi.c b/drivers/video/rockchip/rk_hdmi.c
index 7976c5e..032b1de 100644
--- a/drivers/video/rockchip/rk_hdmi.c
+++ b/drivers/video/rockchip/rk_hdmi.c
@@ -132,8 +132,8 @@
 
 static void hdmi_set_clock_regenerator(struct rk3288_hdmi *regs, u32 n, u32 cts)
 {
-	u8 cts3;
-	u8 n3;
+	uint cts3;
+	uint n3;
 
 	/* first set ncts_atomic_write (if present) */
 	n3 = HDMI_AUD_N3_NCTS_ATOMIC_WRITE;
@@ -199,7 +199,7 @@
 static void hdmi_video_sample(struct rk3288_hdmi *regs)
 {
 	u32 color_format = 0x01;
-	u8 val;
+	uint val;
 
 	val = HDMI_TX_INVID0_INTERNAL_DE_GENERATOR_DISABLE |
 	      ((color_format << HDMI_TX_INVID0_VIDEO_MAPPING_OFFSET) &
@@ -256,7 +256,7 @@
 	u32 output_select = HDMI_VP_CONF_OUTPUT_SELECTOR_BYPASS;
 	u32 remap_size = HDMI_VP_REMAP_YCC422_16BIT;
 	u32 color_depth = 0;
-	u8 val, vp_conf;
+	uint val, vp_conf;
 
 	/* set the packetizer registers */
 	val = ((color_depth << HDMI_VP_PR_CD_COLOR_DEPTH_OFFSET) &
@@ -297,7 +297,7 @@
 			output_select);
 }
 
-static inline void hdmi_phy_test_clear(struct rk3288_hdmi *regs, u8 bit)
+static inline void hdmi_phy_test_clear(struct rk3288_hdmi *regs, uint bit)
 {
 	clrsetbits_le32(&regs->phy_tst0, HDMI_PHY_TST0_TSTCLR_MASK,
 			bit << HDMI_PHY_TST0_TSTCLR_OFFSET);
@@ -382,7 +382,7 @@
 static int hdmi_phy_configure(struct rk3288_hdmi *regs, u32 mpixelclock)
 {
 	ulong start;
-	u8 i, val;
+	uint i, val;
 
 	writel(HDMI_MC_FLOWCTRL_FEED_THROUGH_OFF_CSC_BYPASS,
 	       &regs->mc_flowctrl);
@@ -481,8 +481,8 @@
 static void hdmi_av_composer(struct rk3288_hdmi *regs,
 			     const struct display_timing *edid)
 {
-	u8 mdataenablepolarity = 1;
-	u8 inv_val;
+	bool mdataenablepolarity = true;
+	uint inv_val;
 	uint hbl;
 	uint vbl;
 
@@ -553,7 +553,7 @@
 /* hdmi initialization step b.4 */
 static void hdmi_enable_video_path(struct rk3288_hdmi *regs)
 {
-	u8 clkdis;
+	uint clkdis;
 
 	/* control period minimum duration */
 	writel(12, &regs->fc_ctrldur);
@@ -580,7 +580,7 @@
 /* workaround to clear the overflow condition */
 static void hdmi_clear_overflow(struct rk3288_hdmi *regs)
 {
-	u8 val, count;
+	uint val, count;
 
 	/* tmds software reset */
 	writel((u8)~HDMI_MC_SWRSTZ_TMDSSWRST_REQ, &regs->mc_swrstz);
@@ -614,7 +614,7 @@
 
 static void hdmi_init_interrupt(struct rk3288_hdmi *regs)
 {
-	u8 ih_mute;
+	uint ih_mute;
 
 	/*
 	 * boot up defaults are:
@@ -650,11 +650,11 @@
 	writel(HDMI_IH_PHY_STAT0_HPD, &regs->ih_phy_stat0);
 }
 
-static u8 hdmi_get_plug_in_status(struct rk3288_hdmi *regs)
+static int hdmi_get_plug_in_status(struct rk3288_hdmi *regs)
 {
-	u8 val = readl(&regs->phy_stat0) & HDMI_PHY_HPD;
+	uint val = readl(&regs->phy_stat0) & HDMI_PHY_HPD;
 
-	return !!(val);
+	return !!val;
 }
 
 static int hdmi_wait_for_hpd(struct rk3288_hdmi *regs)
@@ -753,7 +753,7 @@
 	return edid_read_err;
 }
 
-static u8 pre_buf[] = {
+static const u8 pre_buf[] = {
 	0x00, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0x00,
 	0x04, 0x69, 0xfa, 0x23, 0xc8, 0x28, 0x01, 0x00,
 	0x10, 0x17, 0x01, 0x03, 0x80, 0x33, 0x1d, 0x78,
@@ -899,7 +899,8 @@
 	rk_setreg(&priv->grf->soc_con6, 1 << 15);
 
 	/* hdmi data from vop id */
-	rk_setreg(&priv->grf->soc_con6, (vop_id == 1) ? (1 << 4) : (1 << 4));
+	rk_clrsetreg(&priv->grf->soc_con6, 1 << 4,
+		     (vop_id == 1) ? (1 << 4) : 0);
 
 	ret = hdmi_wait_for_hpd(priv->regs);
 	if (ret < 0) {
diff --git a/drivers/video/rockchip/rk_vop.c b/drivers/video/rockchip/rk_vop.c
index c6d88d9..eab5486 100644
--- a/drivers/video/rockchip/rk_vop.c
+++ b/drivers/video/rockchip/rk_vop.c
@@ -195,7 +195,6 @@
 	struct udevice *disp;
 	int ret, remote, i, offset;
 	struct display_plat *disp_uc_plat;
-	struct udevice *dev_clk;
 	struct clk clk;
 
 	vop_id = fdtdec_get_int(blob, ep_node, "reg", -1);
@@ -222,6 +221,11 @@
 
 	disp_uc_plat = dev_get_uclass_platdata(disp);
 	debug("Found device '%s', disp_uc_priv=%p\n", disp->name, disp_uc_plat);
+	if (display_in_use(disp)) {
+		debug("   - device in use\n");
+		return -EBUSY;
+	}
+
 	disp_uc_plat->source_id = remote_vop_id;
 	disp_uc_plat->src_dev = dev;
 
@@ -238,11 +242,7 @@
 		return ret;
 	}
 
-	ret = rockchip_get_clk(&dev_clk);
-	if (!ret) {
-		clk.id = DCLK_VOP0 + remote_vop_id;
-		ret = clk_request(dev_clk, &clk);
-	}
+	ret = clk_get_by_index(dev, 1, &clk);
 	if (!ret)
 		ret = clk_set_rate(&clk, timing.pixelclock.typ);
 	if (ret) {
@@ -316,6 +316,10 @@
 	/*
 	 * Try all the ports until we find one that works. In practice this
 	 * tries EDP first if available, then HDMI.
+	 *
+	 * Note that rockchip_vop_set_clk() always uses NPLL as the source
+	 * clock so it is currently not possible to use more than one display
+	 * device simultaneously.
 	 */
 	port = fdt_subnode_offset(blob, dev->of_offset, "port");
 	if (port < 0)
diff --git a/drivers/video/video-uclass.c b/drivers/video/video-uclass.c
index 11ca793..3036e3a 100644
--- a/drivers/video/video-uclass.c
+++ b/drivers/video/video-uclass.c
@@ -117,7 +117,8 @@
 
 	if (priv->flush_dcache) {
 		flush_dcache_range((ulong)priv->fb,
-				   (ulong)priv->fb + priv->fb_size);
+				   ALIGN((ulong)priv->fb + priv->fb_size,
+					 CONFIG_SYS_CACHELINE_SIZE));
 	}
 #elif defined(CONFIG_VIDEO_SANDBOX_SDL)
 	struct video_priv *priv = dev_get_uclass_priv(vid);
diff --git a/include/configs/rk3036_common.h b/include/configs/rk3036_common.h
index 4eef3f8..92be29e 100644
--- a/include/configs/rk3036_common.h
+++ b/include/configs/rk3036_common.h
@@ -79,6 +79,13 @@
 #define CONFIG_G_DNL_VENDOR_NUM		0x2207
 #define CONFIG_G_DNL_PRODUCT_NUM	0x310a
 
+/* usb host */
+#ifdef CONFIG_CMD_USB
+#define CONFIG_USB_DWC2
+#define CONFIG_USB_HOST_ETHER
+#define CONFIG_USB_ETHER_SMSC95XX
+#define CONFIG_USB_ETHER_ASIX
+#endif
 #define ENV_MEM_LAYOUT_SETTINGS \
 	"scriptaddr=0x60000000\0" \
 	"pxefile_addr_r=0x60100000\0" \
diff --git a/include/configs/rockchip-common.h b/include/configs/rockchip-common.h
index 7ca1696..9ec71c4 100644
--- a/include/configs/rockchip-common.h
+++ b/include/configs/rockchip-common.h
@@ -27,7 +27,7 @@
 	"name=reserved2,size=4M,uuid=${uuid_gpt_reserved2};" \
 	"name=loader2,size=4MB,uuid=${uuid_gpt_loader2};" \
 	"name=atf,size=4M,uuid=${uuid_gpt_atf};" \
-	"name=boot,size=128M,bootable,uuid=${uuid_gpt_boot};" \
+	"name=boot,size=112M,bootable,uuid=${uuid_gpt_boot};" \
 	"name=rootfs,size=-,uuid=${uuid_gpt_rootfs};\0" \
 
 #endif
diff --git a/include/configs/chromebook_jerry.h b/include/configs/veyron.h
similarity index 100%
rename from include/configs/chromebook_jerry.h
rename to include/configs/veyron.h
diff --git a/include/display.h b/include/display.h
index b1c4766..d0a08d4 100644
--- a/include/display.h
+++ b/include/display.h
@@ -16,10 +16,12 @@
  * @source_id:	ID for the source of the display data, typically a video
  * controller
  * @src_dev:	Source device providing the video
+ * @in_use:	Display is being used
  */
 struct display_plat {
 	int source_id;
 	struct udevice *src_dev;
+	bool in_use;
 };
 
 /**
@@ -41,6 +43,14 @@
 int display_enable(struct udevice *dev, int panel_bpp,
 		   const struct display_timing *timing);
 
+/**
+ * display_in_use() - Check if a display is in use by any device
+ *
+ * @return true if the device is in use (display_enable() has been called
+ * successfully), else false
+ */
+bool display_in_use(struct udevice *dev);
+
 struct dm_display_ops {
 	/**
 	 * read_timing() - Read information directly
diff --git a/include/power/regulator.h b/include/power/regulator.h
index f47ab67..1a8e575 100644
--- a/include/power/regulator.h
+++ b/include/power/regulator.h
@@ -261,6 +261,16 @@
 int regulator_set_value(struct udevice *dev, int uV);
 
 /**
+ * regulator_set_value_force: set the microvoltage value of a given regulator
+ *			      without any min-,max condition check
+ *
+ * @dev    - pointer to the regulator device
+ * @uV     - the output value to set [micro Volts]
+ * @return - 0 on success or -errno val if fails
+ */
+int regulator_set_value_force(struct udevice *dev, int uV);
+
+/**
  * regulator_get_current: get microampere value of a given regulator
  *
  * @dev    - pointer to the regulator device