board/BuR: move everything possible from board's headerfile to KConfig

We drop everything possible things from board headerfiles and replace
this functionality with responsible settings in Kconfig (_defconfig).

Signed-off-by: Hannes Schmelzer <oe5hpm@oevsv.at>
Reviewed-by: Tom Rini <trini@konsulko.com>
diff --git a/configs/kwb_defconfig b/configs/kwb_defconfig
index 7bdc6b6..4d2aa6c 100644
--- a/configs/kwb_defconfig
+++ b/configs/kwb_defconfig
@@ -2,6 +2,7 @@
 CONFIG_TARGET_KWB=y
 CONFIG_SPL=y
 CONFIG_SYS_EXTRA_OPTIONS="SERIAL1,CONS_INDEX=1"
+CONFIG_HUSH_PARSER=y
 # CONFIG_CMD_BOOTD is not set
 # CONFIG_CMD_BOOTM is not set
 # CONFIG_CMD_GO is not set
@@ -13,9 +14,18 @@
 # CONFIG_CMD_LOADB is not set
 # CONFIG_CMD_LOADS is not set
 # CONFIG_CMD_FLASH is not set
+CONFIG_CMD_I2C=y
+CONFIG_CMD_USB=y
 # CONFIG_CMD_FPGA is not set
 CONFIG_CMD_GPIO=y
 # CONFIG_CMD_ITEST is not set
 # CONFIG_CMD_SETEXPR is not set
+CONFIG_CMD_DHCP=y
 # CONFIG_CMD_NFS is not set
+CONFIG_CMD_PING=y
+CONFIG_CMD_TIME=y
+CONFIG_NETCONSOLE=y
 CONFIG_SYS_NS16550=y
+CONFIG_USB=y
+CONFIG_USB_MUSB_HOST=y
+CONFIG_USB_STORAGE=y
diff --git a/configs/tseries_mmc_defconfig b/configs/tseries_mmc_defconfig
index 15cfab4..168e379 100644
--- a/configs/tseries_mmc_defconfig
+++ b/configs/tseries_mmc_defconfig
@@ -2,6 +2,7 @@
 CONFIG_TARGET_TSERIES=y
 CONFIG_SPL=y
 CONFIG_SYS_EXTRA_OPTIONS="SERIAL1,CONS_INDEX=1,EMMC_BOOT"
+CONFIG_HUSH_PARSER=y
 # CONFIG_CMD_IMI is not set
 # CONFIG_CMD_IMLS is not set
 # CONFIG_CMD_XIMG is not set
@@ -10,9 +11,18 @@
 # CONFIG_CMD_LOADB is not set
 # CONFIG_CMD_LOADS is not set
 # CONFIG_CMD_FLASH is not set
+CONFIG_CMD_I2C=y
+CONFIG_CMD_USB=y
 # CONFIG_CMD_FPGA is not set
 CONFIG_CMD_GPIO=y
 # CONFIG_CMD_ITEST is not set
 # CONFIG_CMD_SETEXPR is not set
+CONFIG_CMD_DHCP=y
 # CONFIG_CMD_NFS is not set
+CONFIG_CMD_PING=y
+CONFIG_CMD_TIME=y
+CONFIG_NETCONSOLE=y
 CONFIG_SYS_NS16550=y
+CONFIG_USB=y
+CONFIG_USB_MUSB_HOST=y
+CONFIG_USB_STORAGE=y
diff --git a/configs/tseries_nand_defconfig b/configs/tseries_nand_defconfig
index b75efd6..8151caf 100644
--- a/configs/tseries_nand_defconfig
+++ b/configs/tseries_nand_defconfig
@@ -2,6 +2,7 @@
 CONFIG_TARGET_TSERIES=y
 CONFIG_SPL=y
 CONFIG_SYS_EXTRA_OPTIONS="SERIAL1,CONS_INDEX=1,NAND"
+CONFIG_HUSH_PARSER=y
 # CONFIG_CMD_IMI is not set
 # CONFIG_CMD_IMLS is not set
 # CONFIG_CMD_XIMG is not set
@@ -10,9 +11,19 @@
 # CONFIG_CMD_LOADB is not set
 # CONFIG_CMD_LOADS is not set
 # CONFIG_CMD_FLASH is not set
+CONFIG_CMD_NAND=y
+CONFIG_CMD_I2C=y
+CONFIG_CMD_USB=y
 # CONFIG_CMD_FPGA is not set
 CONFIG_CMD_GPIO=y
 # CONFIG_CMD_ITEST is not set
 # CONFIG_CMD_SETEXPR is not set
+CONFIG_CMD_DHCP=y
 # CONFIG_CMD_NFS is not set
+CONFIG_CMD_PING=y
+CONFIG_CMD_TIME=y
+CONFIG_NETCONSOLE=y
 CONFIG_SYS_NS16550=y
+CONFIG_USB=y
+CONFIG_USB_MUSB_HOST=y
+CONFIG_USB_STORAGE=y
diff --git a/configs/tseries_spi_defconfig b/configs/tseries_spi_defconfig
index 0390691..901c55e 100644
--- a/configs/tseries_spi_defconfig
+++ b/configs/tseries_spi_defconfig
@@ -2,6 +2,7 @@
 CONFIG_TARGET_TSERIES=y
 CONFIG_SPL=y
 CONFIG_SYS_EXTRA_OPTIONS="SERIAL1,CONS_INDEX=1,SPI_BOOT,EMMC_BOOT"
+CONFIG_HUSH_PARSER=y
 # CONFIG_CMD_IMI is not set
 # CONFIG_CMD_IMLS is not set
 # CONFIG_CMD_XIMG is not set
@@ -10,11 +11,23 @@
 # CONFIG_CMD_LOADB is not set
 # CONFIG_CMD_LOADS is not set
 # CONFIG_CMD_FLASH is not set
+CONFIG_CMD_SF=y
+CONFIG_CMD_SPI=y
+CONFIG_CMD_I2C=y
+CONFIG_CMD_USB=y
 # CONFIG_CMD_FPGA is not set
 CONFIG_CMD_GPIO=y
 # CONFIG_CMD_ITEST is not set
 # CONFIG_CMD_SETEXPR is not set
+CONFIG_CMD_DHCP=y
 # CONFIG_CMD_NFS is not set
+CONFIG_CMD_PING=y
+CONFIG_CMD_TIME=y
+CONFIG_NETCONSOLE=y
 CONFIG_SPI_FLASH=y
 CONFIG_SPI_FLASH_STMICRO=y
+# CONFIG_SPI_FLASH_USE_4K_SECTORS is not set
 CONFIG_SYS_NS16550=y
+CONFIG_USB=y
+CONFIG_USB_MUSB_HOST=y
+CONFIG_USB_STORAGE=y
diff --git a/include/configs/bur_am335x_common.h b/include/configs/bur_am335x_common.h
index e666933..8429cf5 100644
--- a/include/configs/bur_am335x_common.h
+++ b/include/configs/bur_am335x_common.h
@@ -24,7 +24,6 @@
 "setenv stdout nc;setenv stdin nc;setenv stderr nc\0"
 
 #define CONFIG_PREBOOT			"run brdefaultip"
-#define CONFIG_CMD_TIME
 
 
 #define CONFIG_AM33XX
@@ -53,19 +52,16 @@
 #define CONFIG_BAUDRATE			115200
 
 /* Network defines */
-#define CONFIG_CMD_DHCP
 #define CONFIG_BOOTP_DNS		/* Configurable parts of CMD_DHCP */
 #define CONFIG_BOOTP_SEND_HOSTNAME
 #define CONFIG_BOOTP_GATEWAY
 #define CONFIG_BOOTP_SUBNETMASK
 #define CONFIG_NET_RETRY_COUNT		2
-#define CONFIG_CMD_PING
 #define CONFIG_DRIVER_TI_CPSW		/* Driver for IP block */
 #define CONFIG_MII			/* Required in net/eth.c */
 #define CONFIG_PHYLIB
 #define CONFIG_PHY_NATSEMI
 /* Network console */
-#define CONFIG_NETCONSOLE			1
 #define CONFIG_BOOTP_MAY_FAIL		/* if we don't have DHCP environment */
 /*
  * SPL related defines.  The Public RAM memory map the ROM defines the
@@ -105,7 +101,6 @@
 #define CONFIG_SYS_OMAP24_I2C_SPEED	100000
 #define CONFIG_SYS_OMAP24_I2C_SLAVE	1
 #define CONFIG_SYS_I2C_OMAP24XX
-#define CONFIG_CMD_I2C
 /* GPIO */
 #define CONFIG_OMAP_GPIO
 /*
@@ -119,7 +114,6 @@
  * console baudrate of 115200 and use the default baud rate table.
  */
 #define CONFIG_SYS_MALLOC_LEN		(5120 << 10)
-#define CONFIG_SYS_HUSH_PARSER
 #define CONFIG_SYS_CONSOLE_INFO_QUIET
 #define CONFIG_ENV_OVERWRITE		/* Overwrite ethaddr / serial# */
 #define CONFIG_SYS_CONSOLE_IS_IN_ENV
diff --git a/include/configs/kwb.h b/include/configs/kwb.h
index 45253b8..e570c71 100644
--- a/include/configs/kwb.h
+++ b/include/configs/kwb.h
@@ -106,7 +106,6 @@
 #undef	CONFIG_BOOTM_NETBSD
 #undef	CONFIG_BOOTM_PLAN9
 #undef	CONFIG_BOOTM_RTEMS
-#undef CONFIG_CMD_CRC32
 
 /* Support both device trees and ATAGs. */
 #define CONFIG_OF_LIBFDT
@@ -122,17 +121,11 @@
 #define CONFIG_USB_MUSB_DISABLE_BULK_COMBINE_SPLIT
 /* attention! not only for gadget, enables also highspeed in hostmode */
 #define CONFIG_USB_GADGET_DUALSPEED
-#define CONFIG_USB_MUSB_HOST
 #define CONFIG_AM335X_USB0
 #define CONFIG_AM335X_USB0_MODE	MUSB_HOST
 #define CONFIG_AM335X_USB1
 #define CONFIG_AM335X_USB1_MODE	MUSB_HOST
 
-#ifdef CONFIG_USB_MUSB_HOST
-#define CONFIG_CMD_USB
-#define CONFIG_USB_STORAGE
-#endif /* CONFIG_USB_MUSB_HOST */
-
 #undef CONFIG_ENV_IS_NOWHERE
 #define CONFIG_ENV_IS_IN_MMC
 #define CONFIG_SYS_MMC_ENV_DEV		0
diff --git a/include/configs/tseries.h b/include/configs/tseries.h
index 93e3454..2d352ed 100644
--- a/include/configs/tseries.h
+++ b/include/configs/tseries.h
@@ -204,7 +204,6 @@
 #define CONFIG_SYS_MAX_NAND_DEVICE	1
 #define CONFIG_SYS_NAND_BASE		0x8000000
 #define CONFIG_NAND_OMAP_GPMC
-#define CONFIG_CMD_NAND
 /* don't change OMAP_ELM, ECCSCHEME. ROM code only supports this */
 #define CONFIG_NAND_OMAP_ELM
 #define CONFIG_NAND_OMAP_ECCSCHEME	OMAP_ECC_BCH8_CODE_HW
@@ -249,23 +248,15 @@
 #define CONFIG_USB_MUSB_DISABLE_BULK_COMBINE_SPLIT
 /* attention! not only for gadget, enables also highspeed in hostmode */
 #define CONFIG_USB_GADGET_DUALSPEED
-#define CONFIG_USB_MUSB_HOST
 #define CONFIG_AM335X_USB0
 #define CONFIG_AM335X_USB0_MODE	MUSB_HOST
 #define CONFIG_AM335X_USB1
 #define CONFIG_AM335X_USB1_MODE MUSB_HOST
 
-#ifdef CONFIG_USB_MUSB_HOST
-#define CONFIG_CMD_USB
-#define CONFIG_USB_STORAGE
-#endif /* CONFIG_USB_MUSB_HOST */
-
 #if defined(CONFIG_SPI_BOOT)
 /* McSPI IP block */
 #define CONFIG_SPI
 #define CONFIG_OMAP3_SPI
-#define CONFIG_CMD_SPI
-#define CONFIG_CMD_SF
 #define CONFIG_SF_DEFAULT_SPEED		24000000
 
 #define CONFIG_SPL_SPI_SUPPORT