ARM: socfpga: Description on FPGA bitstream type and file name for Arria 10
This patch adds description on properties about file name used for both
peripheral bitstream and core bitstream.
Signed-off-by: Tien Fong Chee <tien.fong.chee@intel.com>
diff --git a/doc/device-tree-bindings/fpga/altera-socfpga-a10-fpga-mgr.txt b/doc/device-tree-bindings/fpga/altera-socfpga-a10-fpga-mgr.txt
index 2fd8e7a..da210bf 100644
--- a/doc/device-tree-bindings/fpga/altera-socfpga-a10-fpga-mgr.txt
+++ b/doc/device-tree-bindings/fpga/altera-socfpga-a10-fpga-mgr.txt
@@ -7,8 +7,31 @@
- The second index is for writing FPGA configuration data.
- resets : Phandle and reset specifier for the device's reset.
- clocks : Clocks used by the device.
+- altr,bitstream : Fit image file name for both FPGA peripheral bitstream,
+ FPGA core bitstream and full bitstream.
-Example:
+ Full bitstream, consist of peripheral bitstream and core
+ bitstream.
+
+ FPGA peripheral bitstream is used to initialize FPGA IOs,
+ PLL, IO48 and DDR. This bitstream is required to get DDR up
+ running.
+
+ FPGA core bitstream contains FPGA design which is used to
+ program FPGA CRAM and ERAM.
+
+Example: Bundles both peripheral bitstream and core bitstream into FIT image
+ called fit_spl_fpga.itb. This FIT image can be created through running
+ this command: tools/mkimage
+ -E -p 400
+ -f board/altera/arria10-socdk/fit_spl_fpga.its
+ fit_spl_fpga.itb
+
+ For details of describing structure and contents of the FIT image,
+ please refer board/altera/arria10-socdk/fit_spl_fpga.its
+
+- Examples for booting with full release or booting with early IO release, then
+ follow by entering early user mode:
fpga_mgr: fpga-mgr@ffd03000 {
compatible = "altr,socfpga-a10-fpga-mgr";
@@ -16,4 +39,5 @@
0xffcfe400 0x20>;
clocks = <&l4_mp_clk>;
resets = <&rst FPGAMGR_RESET>;
+ altr,bitstream = "fit_spl_fpga.itb";
};