commit 186585c47c6991f107e11c54a174bed17df5e498
author Peng Fan <peng.fan@nxp.com> Sun Dec 11 19:24:37 2016 +0800
committer Stefano Babic <sbabic@denx.de> Fri Dec 16 11:38:24 2016 +0100
tree 0954ef8347162fa0f82edbc888d0313ef83a853e
parent 75c84a6980e502d1dbbf493e78a24410177fd574

arm: imx: add i.MX6SLL EVK board support

Add i.MX6SLL EVK board support.
1. Add imx6sll-evk device tree.
2. Enable SDHC/I2C/UART.
3. Enable REGULATOR/PMIC/I2C/GPIO/SDHC/PINCTRL driver.

Boot Log:
U-Boot 2016.11-00127-gc635871-dirty (Nov 24 2016 - 13:28:19 +0800)

CPU:   Freescale i.MX6SLL rev1.0 at 792MHz
CPU:   Commercial temperature grade (0C to 95C)Reset cause: POR
Model: Freescale i.MX6SLL EVK Board
Board: MX6SLL EVK
DRAM:  2 GiB
i2c bus 0 at 35258368, no gpio pinctrl state.
PMIC: PFUZE100! DEV_ID=0x10 REV_ID=0x21
MMC:   FSL_SDHC: 0, FSL_SDHC: 1, FSL_SDHC: 2
In:    serial
Out:   serial
Err:   serial
Net:   CPU Net Initialization Failed
No ethernet found.
Hit any key to stop autoboot:  0

Signed-off-by: Peng Fan <peng.fan@nxp.com>
Cc: Stefano Babic <sbabic@denx.de>

arch/arm/cpu/armv7/mx6/Kconfig

diff --git a/arch/arm/cpu/armv7/mx6/Kconfig b/arch/arm/cpu/armv7/mx6/Kconfig
index ba33d4c..eefe629 100644
--- a/arch/arm/cpu/armv7/mx6/Kconfig
+++ b/arch/arm/cpu/armv7/mx6/Kconfig
@@ -146,6 +146,12 @@
 	bool "mx6slevk"
 	select SUPPORT_SPL
 
+config TARGET_MX6SLLEVK
+        bool "mx6sll evk"
+        select MX6SLL
+        select DM
+        select DM_THERMAL
+
 config TARGET_MX6SXSABRESD
 	bool "mx6sxsabresd"
 	select MX6SX
@@ -283,6 +289,7 @@
 source "board/freescale/mx6qsabreauto/Kconfig"
 source "board/freescale/mx6sabresd/Kconfig"
 source "board/freescale/mx6slevk/Kconfig"
+source "board/freescale/mx6sllevk/Kconfig"
 source "board/freescale/mx6sxsabresd/Kconfig"
 source "board/freescale/mx6sxsabreauto/Kconfig"
 source "board/freescale/mx6ul_14x14_evk/Kconfig"