armv8: ls2080ardb: Add sd_bootcmd for distro fallback in case of sdboot
Signed-off-by: Shengzhou Liu <Shengzhou.Liu@nxp.com>
Reviewed-by: York Sun <york.sun@nxp.com>
diff --git a/include/configs/ls2080ardb.h b/include/configs/ls2080ardb.h
index 48c3a53..650db2f 100644
--- a/include/configs/ls2080ardb.h
+++ b/include/configs/ls2080ardb.h
@@ -349,6 +349,17 @@
"esbc_validate 0x20700000 && " \
"esbc_validate 0x20740000;" \
"fsl_mc start mc 0x20a00000 0x20e00000 \0"
+#elif defined(CONFIG_SD_BOOT)
+#define MC_INIT_CMD \
+ "mcinitcmd=mmcinfo;mmc read 0x80000000 0x5000 0x800;" \
+ "mmc read 0x80100000 0x7000 0x800;" \
+ "env exists secureboot && " \
+ "mmc read 0x80700000 0x3800 0x10 && " \
+ "mmc read 0x80740000 0x3A00 0x10 && " \
+ "esbc_validate 0x80700000 && " \
+ "esbc_validate 0x80740000 ;" \
+ "fsl_mc start mc 0x80000000 0x80100000\0" \
+ "mcmemsize=0x70000000\0"
#else
#define MC_INIT_CMD \
"mcinitcmd=env exists secureboot && " \
@@ -379,8 +390,14 @@
"fdt_addr_r=0x90000000\0" \
"load_addr=0xa0000000\0" \
"kernel_size=0x2800000\0" \
+ "kernel_addr_sd=0x8000\0" \
+ "kernel_size_sd=0x14000\0" \
"console=ttyAMA0,38400n8\0" \
"mcmemsize=0x70000000\0" \
+ "sd_bootcmd=echo Trying load from SD ..;" \
+ "mmcinfo; mmc read $load_addr " \
+ "$kernel_addr_sd $kernel_size_sd && " \
+ "bootm $load_addr#$board\0" \
MC_INIT_CMD \
BOOTENV \
"boot_scripts=ls2088ardb_boot.scr\0" \
@@ -409,9 +426,6 @@
"${scripthdraddr} ${prefix}${boot_script_hdr} " \
"&& esbc_validate ${scripthdraddr};" \
"source ${scriptaddr}\0" \
- "installer=load mmc 0:2 $load_addr " \
- "/flex_installer_arm64.itb; " \
- "bootm $load_addr#ls2088ardb\0" \
"qspi_bootcmd=echo Trying load from qspi..;" \
"sf probe && sf read $load_addr " \
"$kernel_start $kernel_size ; env exists secureboot &&" \
@@ -433,16 +447,27 @@
"&& esbc_validate 0x20780000; " \
"env exists mcinitcmd && " \
"fsl_mc lazyapply dpl 0x20d00000; " \
- "run distro_bootcmd;run qspi_bootcmd; " \
- "env exists secureboot && esbc_halt; "
+ "run distro_bootcmd;env exists secureboot " \
+ " && esbc_halt;run qspi_bootcmd; "
+#elif defined(CONFIG_SD_BOOT)
+/* Try to boot an on-SD kernel first, then do normal distro boot */
+#define CONFIG_BOOTCOMMAND \
+ "env exists mcinitcmd && env exists secureboot "\
+ "&& mmcinfo && mmc read $load_addr 0x3c00 0x800 " \
+ "&& esbc_validate $load_addr; " \
+ "env exists mcinitcmd && run mcinitcmd " \
+ "&& mmc read 0x88000000 0x6800 0x800 " \
+ "&& fsl_mc lazyapply dpl 0x88000000; " \
+ "run distro_bootcmd;env exists secureboot " \
+ "&& esbc_halt;run sd_bootcmd;"
#else
/* Try to boot an on-NOR kernel first, then do normal distro boot */
#define CONFIG_BOOTCOMMAND \
"env exists mcinitcmd && env exists secureboot "\
"&& esbc_validate 0x580780000; env exists mcinitcmd "\
"&& fsl_mc lazyapply dpl 0x580d00000;" \
- "run distro_bootcmd;run nor_bootcmd; " \
- "env exists secureboot && esbc_halt; "
+ "run distro_bootcmd; env exists secureboot " \
+ "&& esbc_halt; run nor_bootcmd;"
#endif
/* MAC/PHY configuration */