ARM: zynq: Add partition description
Xilinx is using standard mtd partition layout for quite a long time. It is
used for testing purpose on evaluation boards.
Also #address/size-cells shouldn't be present without nodes which should
use them that's why move them from zynq-7000.dtsi to nand/nor nodes
directly.
The patch was tested on zc706 and zedboard(with also increasing max
frequency and rx bus width).
Signed-off-by: Michal Simek <michal.simek@amd.com>
Link: https://lore.kernel.org/r/4c3348981bba32d3892194420d78fe8621c47534.1698837725.git.michal.simek@amd.com
diff --git a/arch/arm/dts/zynq-zc706.dts b/arch/arm/dts/zynq-zc706.dts
index 18963a3..ceea982 100644
--- a/arch/arm/dts/zynq-zc706.dts
+++ b/arch/arm/dts/zynq-zc706.dts
@@ -317,6 +317,31 @@
spi-tx-bus-width = <1>;
spi-rx-bus-width = <4>;
spi-max-frequency = <50000000>;
+ partitions {
+ compatible = "fixed-partitions";
+ #address-cells = <1>;
+ #size-cells = <1>;
+ partition@0 {
+ label = "qspi-fsbl-uboot";
+ reg = <0x0 0x100000>;
+ };
+ partition@100000 {
+ label = "qspi-linux";
+ reg = <0x100000 0x500000>;
+ };
+ partition@600000 {
+ label = "qspi-device-tree";
+ reg = <0x600000 0x20000>;
+ };
+ partition@620000 {
+ label = "qspi-rootfs";
+ reg = <0x620000 0x5e0000>;
+ };
+ partition@c00000 {
+ label = "qspi-bitstream";
+ reg = <0xc00000 0x400000>;
+ };
+ };
};
};