drivers: usb: xhci-fsl: Change burst beat and outstanding pipelined transfers requests
This is required for better performance, and performs below tuning:
1. Enable burst length set, and define it as 4/8/16.
2. Set burst request limit to 16 requests.
Signed-off-by: Rajesh Bhagat <rajesh.bhagat@nxp.com>
Signed-off-by: Sriram Dash <sriram.dash@nxp.com>
diff --git a/drivers/usb/host/xhci-fsl.c b/drivers/usb/host/xhci-fsl.c
index bda5b5f..2529d0e 100644
--- a/drivers/usb/host/xhci-fsl.c
+++ b/drivers/usb/host/xhci-fsl.c
@@ -58,6 +58,13 @@
}
}
+static void fsl_xhci_set_beat_burst_length(struct dwc3 *dwc3_reg)
+{
+ clrsetbits_le32(&dwc3_reg->g_sbuscfg0, USB3_ENABLE_BEAT_BURST_MASK,
+ USB3_ENABLE_BEAT_BURST);
+ setbits_le32(&dwc3_reg->g_sbuscfg1, USB3_SET_BEAT_BURST_LIMIT);
+}
+
static int fsl_xhci_core_init(struct fsl_xhci *fsl_xhci)
{
int ret = 0;
@@ -74,6 +81,9 @@
/* Set GFLADJ_30MHZ as 20h as per XHCI spec default value */
dwc3_set_fladj(fsl_xhci->dwc3_reg, GFLADJ_30MHZ_DEFAULT);
+ /* Change beat burst and outstanding pipelined transfers requests */
+ fsl_xhci_set_beat_burst_length(fsl_xhci->dwc3_reg);
+
return ret;
}
diff --git a/include/linux/usb/xhci-fsl.h b/include/linux/usb/xhci-fsl.h
index d04e3cc..15cac40 100644
--- a/include/linux/usb/xhci-fsl.h
+++ b/include/linux/usb/xhci-fsl.h
@@ -20,6 +20,9 @@
#define USB3_PHY_TX_RX_POWERON (USB3_PHY_RX_POWERON | USB3_PHY_TX_POWERON)
#define USB3_PWRCTL_CLK_CMD_SHIFT 14
#define USB3_PWRCTL_CLK_FREQ_SHIFT 22
+#define USB3_ENABLE_BEAT_BURST 0xF
+#define USB3_ENABLE_BEAT_BURST_MASK 0xFF
+#define USB3_SET_BEAT_BURST_LIMIT 0xF00
/* USBOTGSS_WRAPPER definitions */
#define USBOTGSS_WRAPRESET BIT(17)