powerpc/usb:Differentiate USB controller base address
Introduce different macros for storing addresses of multiple
USB controllers. This is required for successful initialization
and usage of multiple USB controllers inside u-boot
Signed-off-by: Ramneek Mehresh <ramneek.mehresh@freescale.com>
diff --git a/arch/powerpc/cpu/mpc83xx/cpu_init.c b/arch/powerpc/cpu/mpc83xx/cpu_init.c
index 0e9ddb8..00572de 100644
--- a/arch/powerpc/cpu/mpc83xx/cpu_init.c
+++ b/arch/powerpc/cpu/mpc83xx/cpu_init.c
@@ -315,7 +315,7 @@
#endif
#if defined(CONFIG_USB_EHCI_FSL) && defined(CONFIG_MPC831x)
uint32_t temp;
- struct usb_ehci *ehci = (struct usb_ehci *)CONFIG_SYS_FSL_USB_ADDR;
+ struct usb_ehci *ehci = (struct usb_ehci *)CONFIG_SYS_FSL_USB1_ADDR;
/* Configure interface. */
setbits_be32(&ehci->control, REFSEL_16MHZ | UTMI_PHY_EN);
diff --git a/arch/powerpc/include/asm/immap_512x.h b/arch/powerpc/include/asm/immap_512x.h
index 814a535..bed80aa 100644
--- a/arch/powerpc/include/asm/immap_512x.h
+++ b/arch/powerpc/include/asm/immap_512x.h
@@ -1255,9 +1255,9 @@
}
#endif /* __ASSEMBLY__ */
-#define CONFIG_SYS_MPC512x_USB_OFFSET 0x4000
-#define CONFIG_SYS_MPC512x_USB_ADDR \
- (CONFIG_SYS_IMMR + CONFIG_SYS_MPC512x_USB_OFFSET)
+#define CONFIG_SYS_MPC512x_USB1_OFFSET 0x4000
+#define CONFIG_SYS_MPC512x_USB1_ADDR \
+ (CONFIG_SYS_IMMR + CONFIG_SYS_MPC512x_USB1_OFFSET)
#define IIM_BASE_ADDR (CONFIG_SYS_IMMR + offsetof(immap_t, iim))
diff --git a/arch/powerpc/include/asm/immap_83xx.h b/arch/powerpc/include/asm/immap_83xx.h
index 57189c9..3c86ff6 100644
--- a/arch/powerpc/include/asm/immap_83xx.h
+++ b/arch/powerpc/include/asm/immap_83xx.h
@@ -764,9 +764,11 @@
} immap_t;
#ifdef CONFIG_HAS_FSL_MPH_USB
-#define CONFIG_SYS_MPC83xx_USB_OFFSET 0x22000 /* use the MPH controller */
+#define CONFIG_SYS_MPC83xx_USB1_OFFSET 0x22000 /* use the MPH controller */
+#define CONFIG_SYS_MPC83xx_USB2_OFFSET 0
#else
-#define CONFIG_SYS_MPC83xx_USB_OFFSET 0x23000 /* use the DR controller */
+#define CONFIG_SYS_MPC83xx_USB1_OFFSET 0
+#define CONFIG_SYS_MPC83xx_USB2_OFFSET 0x23000 /* use the DR controller */
#endif
#elif defined(CONFIG_MPC8313)
@@ -1031,11 +1033,15 @@
#define CONFIG_SYS_MPC83xx_ESDHC_ADDR \
(CONFIG_SYS_IMMR + CONFIG_SYS_MPC83xx_ESDHC_OFFSET)
-#ifndef CONFIG_SYS_MPC83xx_USB_OFFSET
-#define CONFIG_SYS_MPC83xx_USB_OFFSET 0x23000
+#ifndef CONFIG_SYS_MPC83xx_USB1_OFFSET
+#define CONFIG_SYS_MPC83xx_USB1_OFFSET 0x23000
+#endif
+#define CONFIG_SYS_MPC83xx_USB1_ADDR \
+ (CONFIG_SYS_IMMR + CONFIG_SYS_MPC83xx_USB1_OFFSET)
+#if defined(CONFIG_MPC834x)
+#define CONFIG_SYS_MPC83xx_USB2_ADDR \
+ (CONFIG_SYS_IMMR + CONFIG_SYS_MPC83xx_USB2_OFFSET)
#endif
-#define CONFIG_SYS_MPC83xx_USB_ADDR \
- (CONFIG_SYS_IMMR + CONFIG_SYS_MPC83xx_USB_OFFSET)
#define CONFIG_SYS_LBC_ADDR (&((immap_t *)CONFIG_SYS_IMMR)->im_lbc)
#define CONFIG_SYS_TSEC1_OFFSET 0x24000
diff --git a/arch/powerpc/include/asm/immap_85xx.h b/arch/powerpc/include/asm/immap_85xx.h
index e516e07..060e0d7 100644
--- a/arch/powerpc/include/asm/immap_85xx.h
+++ b/arch/powerpc/include/asm/immap_85xx.h
@@ -2932,7 +2932,6 @@
#endif
#define CONFIG_SYS_MPC85xx_USB1_OFFSET 0x210000
#define CONFIG_SYS_MPC85xx_USB2_OFFSET 0x211000
-#define CONFIG_SYS_MPC85xx_USB_OFFSET CONFIG_SYS_MPC85xx_USB1_OFFSET
#define CONFIG_SYS_MPC85xx_USB1_PHY_OFFSET 0x214000
#define CONFIG_SYS_MPC85xx_USB2_PHY_OFFSET 0x214100
#define CONFIG_SYS_MPC85xx_SATA1_OFFSET 0x220000
@@ -2985,7 +2984,7 @@
#define CONFIG_SYS_MPC85xx_IFC_OFFSET 0x1e000
#define CONFIG_SYS_MPC85xx_L2_OFFSET 0x20000
#define CONFIG_SYS_MPC85xx_DMA_OFFSET 0x21000
-#define CONFIG_SYS_MPC85xx_USB_OFFSET 0x22000
+#define CONFIG_SYS_MPC85xx_USB1_OFFSET 0x22000
#define CONFIG_SYS_MPC85xx_USB2_OFFSET 0x23000
#ifdef CONFIG_TSECV2
#define CONFIG_SYS_TSEC1_OFFSET 0xB0000
@@ -3086,8 +3085,10 @@
(CONFIG_SYS_IMMR + CONFIG_SYS_FSL_CORENET_SERDES_OFFSET)
#define CONFIG_SYS_FSL_CORENET_SERDES2_ADDR \
(CONFIG_SYS_IMMR + CONFIG_SYS_FSL_CORENET_SERDES2_OFFSET)
-#define CONFIG_SYS_MPC85xx_USB_ADDR \
- (CONFIG_SYS_IMMR + CONFIG_SYS_MPC85xx_USB_OFFSET)
+#define CONFIG_SYS_MPC85xx_USB1_ADDR \
+ (CONFIG_SYS_IMMR + CONFIG_SYS_MPC85xx_USB1_OFFSET)
+#define CONFIG_SYS_MPC85xx_USB2_ADDR \
+ (CONFIG_SYS_IMMR + CONFIG_SYS_MPC85xx_USB2_OFFSET)
#define CONFIG_SYS_MPC85xx_USB1_PHY_ADDR \
(CONFIG_SYS_IMMR + CONFIG_SYS_MPC85xx_USB1_PHY_OFFSET)
#define CONFIG_SYS_MPC85xx_USB2_PHY_ADDR \