usb: asix: Move software resets to basic_init
The ASIX driver calls a basic_init() function during get_info(), so that
not all initialization tasks need to be redone on every init().
Unfortunately, the most important one is still triggered too often: the
driver does a full port and MII reset on every asix_init(), requiring up
to several seconds to reestablish the link.
This patch confines that software reset into the asix_basic_init()
function so that it will only be executed once. This saves about a
second of boot time on systems using BOOTP.
Note: this patch was previously submitted many moons ago as:
usb: usbeth: asix: Do a fast init if link already established
That patch seens to have been lost or forgotten, so this is a rebased
version. It is tested on snow with a Asix USB dongle (Cisco).
Signed-off-by: Julius Werner <jwerner@chromium.org>
Signed-off-by: Simon Glass <sjg@chromium.org>
Reviewed-by: Simon Glass <sjg@chromium.org>
Reviewed-by: Vadim Bendebury <vbendeb@chromium.org>
diff --git a/drivers/usb/eth/asix.c b/drivers/usb/eth/asix.c
index 75ec8f7..76624b9 100644
--- a/drivers/usb/eth/asix.c
+++ b/drivers/usb/eth/asix.c
@@ -407,46 +407,40 @@
rx_ctl = asix_read_rx_ctl(dev);
debug("RX_CTL is 0x%04x setting to 0x0000\n", rx_ctl);
- return 0;
-}
-
-/*
- * Asix callbacks
- */
-static int asix_init(struct eth_device *eth, bd_t *bd)
-{
- struct ueth_data *dev = (struct ueth_data *)eth->priv;
- int timeout = 0;
-#define TIMEOUT_RESOLUTION 50 /* ms */
- int link_detected;
-
- debug("** %s()\n", __func__);
-
dev->phy_id = asix_get_phy_addr(dev);
if (dev->phy_id < 0)
debug("Failed to read phy id\n");
- if (asix_sw_reset(dev, AX_SWRESET_PRL) < 0)
- goto out_err;
-
- if (asix_sw_reset(dev, AX_SWRESET_IPRL | AX_SWRESET_PRL) < 0)
- goto out_err;
-
asix_mdio_write(dev, dev->phy_id, MII_BMCR, BMCR_RESET);
asix_mdio_write(dev, dev->phy_id, MII_ADVERTISE,
ADVERTISE_ALL | ADVERTISE_CSMA);
mii_nway_restart(dev);
if (asix_write_medium_mode(dev, AX88772_MEDIUM_DEFAULT) < 0)
- goto out_err;
+ return -1;
if (asix_write_cmd(dev, AX_CMD_WRITE_IPG0,
AX88772_IPG0_DEFAULT | AX88772_IPG1_DEFAULT,
AX88772_IPG2_DEFAULT, 0, NULL) < 0) {
debug("Write IPG,IPG1,IPG2 failed\n");
- goto out_err;
+ return -1;
}
+ return 0;
+}
+
+/*
+ * Asix callbacks
+ */
+static int asix_init(struct eth_device *eth, bd_t *bd)
+{
+ struct ueth_data *dev = (struct ueth_data *)eth->priv;
+ int timeout = 0;
+#define TIMEOUT_RESOLUTION 50 /* ms */
+ int link_detected;
+
+ debug("** %s()\n", __func__);
+
if (asix_write_rx_ctl(dev, AX_DEFAULT_RX_CTL) < 0)
goto out_err;