rockchip: pine64: pinephone-pro: migrate to rockchip_early_misc_init_r
Compared to the original misc_init_r from Rockchip mach code,
setup_iodomain() is added and rockchip_setup_macaddr() is not called.
It is assumed adding rockchip_setup_macaddr() back is fine.
Let's use rockchip_early_misc_init_r instead of reimplementing the whole
misc_init_r from Rockchip (the side effect being that
rockchip_setup_macaddr() is back).
Cc: Quentin Schulz <foss+uboot@0leil.net>
Reviewed-by: Kever Yang <kever.yang@rock-chips.com>
Reviewed-by: Dragan Simic <dsimic@manjaro.org>
Reviewed-by: Peter Robinson <pbrobinson@gmail.com>
Signed-off-by: Quentin Schulz <quentin.schulz@theobroma-systems.com>
diff --git a/board/pine64/pinephone-pro-rk3399/pinephone-pro-rk3399.c b/board/pine64/pinephone-pro-rk3399/pinephone-pro-rk3399.c
index b6ccbb9..de75ee3 100644
--- a/board/pine64/pinephone-pro-rk3399/pinephone-pro-rk3399.c
+++ b/board/pine64/pinephone-pro-rk3399/pinephone-pro-rk3399.c
@@ -12,7 +12,6 @@
#include <asm/arch-rockchip/clock.h>
#include <asm/arch-rockchip/grf_rk3399.h>
#include <asm/arch-rockchip/hardware.h>
-#include <asm/arch-rockchip/misc.h>
#include <power/regulator.h>
#define GRF_IO_VSEL_BT565_GPIO2AB 1
@@ -56,23 +55,11 @@
rk_setreg(&pmugrf->soc_con0, 1 << PMUGRF_CON0_VSEL_SHIFT);
}
-int misc_init_r(void)
+int rockchip_early_misc_init_r(void)
{
- const u32 cpuid_offset = 0x7;
- const u32 cpuid_length = 0x10;
- u8 cpuid[cpuid_length];
- int ret;
-
setup_iodomain();
- ret = rockchip_cpuid_from_efuse(cpuid_offset, cpuid_length, cpuid);
- if (ret)
- return ret;
-
- ret = rockchip_cpuid_set(cpuid, cpuid_length);
- if (ret)
- return ret;
+ return 0;
- return ret;
}
#endif