dts: arm: socfpga: merge gen5 devicetrees from linux

Add -u-boot.dtsi files to keep the current U-Boot behaviour:
- add u-boot,dm-pre-reloc where required
- disable watchdog
- set uart clock frequency
- add gpio bank-name properties
where appropriate:
- make qspi work (add alias for spi0, fix compatible for flash)
- enable usb (status okay, add alias for udc0)

Adapt board dts files that are not in Linux to keep their old
behaviour.

Change licenses to SPDX.

(Patman warnings/errors are in 1:1 copied files from Linux)

Signed-off-by: Simon Goldschmidt <simon.k.r.goldschmidt@gmail.com>
diff --git a/arch/arm/dts/socfpga.dtsi b/arch/arm/dts/socfpga.dtsi
index 9d8c4eb..2458d67 100644
--- a/arch/arm/dts/socfpga.dtsi
+++ b/arch/arm/dts/socfpga.dtsi
@@ -1,9 +1,8 @@
 // SPDX-License-Identifier: GPL-2.0+
 /*
- *  Copyright (C) 2012 Altera <www.altera.com>
+ * Copyright (C) 2012 Altera <www.altera.com>
  */
 
-#include "skeleton.dtsi"
 #include <dt-bindings/reset/altr,rst-mgr.h>
 
 / {
@@ -11,34 +10,26 @@
 	#size-cells = <1>;
 
 	aliases {
-		ethernet0 = &gmac0;
-		ethernet1 = &gmac1;
-		i2c0 = &i2c0;
-		i2c1 = &i2c1;
-		i2c2 = &i2c2;
-		i2c3 = &i2c3;
 		serial0 = &uart0;
 		serial1 = &uart1;
 		timer0 = &timer0;
 		timer1 = &timer1;
 		timer2 = &timer2;
 		timer3 = &timer3;
-		spi0 = &qspi;
-		spi1 = &spi0;
-		spi2 = &spi1;
 	};
 
 	cpus {
 		#address-cells = <1>;
 		#size-cells = <0>;
+		enable-method = "altr,socfpga-smp";
 
-		cpu@0 {
+		cpu0: cpu@0 {
 			compatible = "arm,cortex-a9";
 			device_type = "cpu";
 			reg = <0>;
 			next-level-cache = <&L2>;
 		};
-		cpu@1 {
+		cpu1: cpu@1 {
 			compatible = "arm,cortex-a9";
 			device_type = "cpu";
 			reg = <1>;
@@ -46,6 +37,15 @@
 		};
 	};
 
+	pmu: pmu@ff111000 {
+		compatible = "arm,cortex-a9-pmu";
+		interrupt-parent = <&intc>;
+		interrupts = <0 176 4>, <0 177 4>;
+		interrupt-affinity = <&cpu0>, <&cpu1>;
+		reg = <0xff111000 0x1000>,
+		      <0xff113000 0x1000>;
+	};
+
 	intc: intc@fffed000 {
 		compatible = "arm,cortex-a9-gic";
 		#interrupt-cells = <3>;
@@ -63,7 +63,7 @@
 		ranges;
 
 		amba {
-			compatible = "arm,amba-bus";
+			compatible = "simple-bus";
 			#address-cells = <1>;
 			#size-cells = <1>;
 			ranges;
@@ -87,6 +87,14 @@
 			};
 		};
 
+		base_fpga_region {
+			compatible = "fpga-region";
+			fpga-mgr = <&fpgamgr0>;
+
+			#address-cells = <0x1>;
+			#size-cells = <0x1>;
+		};
+
 		can0: can@ffc00000 {
 			compatible = "bosch,d_can";
 			reg = <0xffc00000 0x1000>;
@@ -131,7 +139,7 @@
 						compatible = "fixed-clock";
 					};
 
-					main_pll: main_pll {
+					main_pll: main_pll@40 {
 						#address-cells = <1>;
 						#size-cells = <0>;
 						#clock-cells = <0>;
@@ -139,7 +147,7 @@
 						clocks = <&osc1>;
 						reg = <0x40>;
 
-						mpuclk: mpuclk {
+						mpuclk: mpuclk@48 {
 							#clock-cells = <0>;
 							compatible = "altr,socfpga-perip-clk";
 							clocks = <&main_pll>;
@@ -147,7 +155,7 @@
 							reg = <0x48>;
 						};
 
-						mainclk: mainclk {
+						mainclk: mainclk@4c {
 							#clock-cells = <0>;
 							compatible = "altr,socfpga-perip-clk";
 							clocks = <&main_pll>;
@@ -155,29 +163,29 @@
 							reg = <0x4C>;
 						};
 
-						dbg_base_clk: dbg_base_clk {
+						dbg_base_clk: dbg_base_clk@50 {
 							#clock-cells = <0>;
 							compatible = "altr,socfpga-perip-clk";
-							clocks = <&main_pll>;
+							clocks = <&main_pll>, <&osc1>;
 							div-reg = <0xe8 0 9>;
 							reg = <0x50>;
 						};
 
-						main_qspi_clk: main_qspi_clk {
+						main_qspi_clk: main_qspi_clk@54 {
 							#clock-cells = <0>;
 							compatible = "altr,socfpga-perip-clk";
 							clocks = <&main_pll>;
 							reg = <0x54>;
 						};
 
-						main_nand_sdmmc_clk: main_nand_sdmmc_clk {
+						main_nand_sdmmc_clk: main_nand_sdmmc_clk@58 {
 							#clock-cells = <0>;
 							compatible = "altr,socfpga-perip-clk";
 							clocks = <&main_pll>;
 							reg = <0x58>;
 						};
 
-						cfg_h2f_usr0_clk: cfg_h2f_usr0_clk {
+						cfg_h2f_usr0_clk: cfg_h2f_usr0_clk@5c {
 							#clock-cells = <0>;
 							compatible = "altr,socfpga-perip-clk";
 							clocks = <&main_pll>;
@@ -185,7 +193,7 @@
 						};
 					};
 
-					periph_pll: periph_pll {
+					periph_pll: periph_pll@80 {
 						#address-cells = <1>;
 						#size-cells = <0>;
 						#clock-cells = <0>;
@@ -193,42 +201,42 @@
 						clocks = <&osc1>, <&osc2>, <&f2s_periph_ref_clk>;
 						reg = <0x80>;
 
-						emac0_clk: emac0_clk {
+						emac0_clk: emac0_clk@88 {
 							#clock-cells = <0>;
 							compatible = "altr,socfpga-perip-clk";
 							clocks = <&periph_pll>;
 							reg = <0x88>;
 						};
 
-						emac1_clk: emac1_clk {
+						emac1_clk: emac1_clk@8c {
 							#clock-cells = <0>;
 							compatible = "altr,socfpga-perip-clk";
 							clocks = <&periph_pll>;
 							reg = <0x8C>;
 						};
 
-						per_qspi_clk: per_qsi_clk {
+						per_qspi_clk: per_qsi_clk@90 {
 							#clock-cells = <0>;
 							compatible = "altr,socfpga-perip-clk";
 							clocks = <&periph_pll>;
 							reg = <0x90>;
 						};
 
-						per_nand_mmc_clk: per_nand_mmc_clk {
+						per_nand_mmc_clk: per_nand_mmc_clk@94 {
 							#clock-cells = <0>;
 							compatible = "altr,socfpga-perip-clk";
 							clocks = <&periph_pll>;
 							reg = <0x94>;
 						};
 
-						per_base_clk: per_base_clk {
+						per_base_clk: per_base_clk@98 {
 							#clock-cells = <0>;
 							compatible = "altr,socfpga-perip-clk";
 							clocks = <&periph_pll>;
 							reg = <0x98>;
 						};
 
-						h2f_usr1_clk: h2f_usr1_clk {
+						h2f_usr1_clk: h2f_usr1_clk@9c {
 							#clock-cells = <0>;
 							compatible = "altr,socfpga-perip-clk";
 							clocks = <&periph_pll>;
@@ -236,7 +244,7 @@
 						};
 					};
 
-					sdram_pll: sdram_pll {
+					sdram_pll: sdram_pll@c0 {
 						#address-cells = <1>;
 						#size-cells = <0>;
 						#clock-cells = <0>;
@@ -244,28 +252,28 @@
 						clocks = <&osc1>, <&osc2>, <&f2s_sdram_ref_clk>;
 						reg = <0xC0>;
 
-						ddr_dqs_clk: ddr_dqs_clk {
+						ddr_dqs_clk: ddr_dqs_clk@c8 {
 							#clock-cells = <0>;
 							compatible = "altr,socfpga-perip-clk";
 							clocks = <&sdram_pll>;
 							reg = <0xC8>;
 						};
 
-						ddr_2x_dqs_clk: ddr_2x_dqs_clk {
+						ddr_2x_dqs_clk: ddr_2x_dqs_clk@cc {
 							#clock-cells = <0>;
 							compatible = "altr,socfpga-perip-clk";
 							clocks = <&sdram_pll>;
 							reg = <0xCC>;
 						};
 
-						ddr_dq_clk: ddr_dq_clk {
+						ddr_dq_clk: ddr_dq_clk@d0 {
 							#clock-cells = <0>;
 							compatible = "altr,socfpga-perip-clk";
 							clocks = <&sdram_pll>;
 							reg = <0xD0>;
 						};
 
-						h2f_usr2_clk: h2f_usr2_clk {
+						h2f_usr2_clk: h2f_usr2_clk@d4 {
 							#clock-cells = <0>;
 							compatible = "altr,socfpga-perip-clk";
 							clocks = <&sdram_pll>;
@@ -312,7 +320,7 @@
 					l3_sp_clk: l3_sp_clk {
 						#clock-cells = <0>;
 						compatible = "altr,socfpga-gate-clk";
-						clocks = <&mainclk>;
+						clocks = <&l3_mp_clk>;
 						div-reg = <0x64 2 2>;
 					};
 
@@ -343,7 +351,7 @@
 					dbg_clk: dbg_clk {
 						#clock-cells = <0>;
 						compatible = "altr,socfpga-gate-clk";
-						clocks = <&dbg_base_clk>;
+						clocks = <&dbg_at_clk>;
 						div-reg = <0x68 2 2>;
 						clk-gate = <0x60 5>;
 					};
@@ -446,6 +454,14 @@
 						clk-phase = <0 135>;
 					};
 
+					sdmmc_clk_divided: sdmmc_clk_divided {
+						#clock-cells = <0>;
+						compatible = "altr,socfpga-gate-clk";
+						clocks = <&sdmmc_clk>;
+						clk-gate = <0xa0 8>;
+						fixed-divider = <4>;
+					};
+
 					nand_x_clk: nand_x_clk {
 						#clock-cells = <0>;
 						compatible = "altr,socfpga-gate-clk";
@@ -453,10 +469,17 @@
 						clk-gate = <0xa0 9>;
 					};
 
+					nand_ecc_clk: nand_ecc_clk {
+						#clock-cells = <0>;
+						compatible = "altr,socfpga-gate-clk";
+						clocks = <&nand_x_clk>;
+						clk-gate = <0xa0 9>;
+					};
+
 					nand_clk: nand_clk {
 						#clock-cells = <0>;
 						compatible = "altr,socfpga-gate-clk";
-						clocks = <&f2s_periph_ref_clk>, <&main_nand_sdmmc_clk>, <&per_nand_mmc_clk>;
+						clocks = <&nand_x_clk>;
 						clk-gate = <0xa0 10>;
 						fixed-divider = <4>;
 					};
@@ -467,8 +490,58 @@
 						clocks = <&f2s_periph_ref_clk>, <&main_qspi_clk>, <&per_qspi_clk>;
 						clk-gate = <0xa0 11>;
 					};
+
+					ddr_dqs_clk_gate: ddr_dqs_clk_gate {
+						#clock-cells = <0>;
+						compatible = "altr,socfpga-gate-clk";
+						clocks = <&ddr_dqs_clk>;
+						clk-gate = <0xd8 0>;
+					};
+
+					ddr_2x_dqs_clk_gate: ddr_2x_dqs_clk_gate {
+						#clock-cells = <0>;
+						compatible = "altr,socfpga-gate-clk";
+						clocks = <&ddr_2x_dqs_clk>;
+						clk-gate = <0xd8 1>;
+					};
+
+					ddr_dq_clk_gate: ddr_dq_clk_gate {
+						#clock-cells = <0>;
+						compatible = "altr,socfpga-gate-clk";
+						clocks = <&ddr_dq_clk>;
+						clk-gate = <0xd8 2>;
+					};
+
+					h2f_user2_clk: h2f_user2_clk {
+						#clock-cells = <0>;
+						compatible = "altr,socfpga-gate-clk";
+						clocks = <&h2f_usr2_clk>;
+						clk-gate = <0xd8 3>;
+					};
+
 				};
-			};
+		};
+
+		fpga_bridge0: fpga_bridge@ff400000 {
+			compatible = "altr,socfpga-lwhps2fpga-bridge";
+			reg = <0xff400000 0x100000>;
+			resets = <&rst LWHPS2FPGA_RESET>;
+			clocks = <&l4_main_clk>;
+		};
+
+		fpga_bridge1: fpga_bridge@ff500000 {
+			compatible = "altr,socfpga-hps2fpga-bridge";
+			reg = <0xff500000 0x10000>;
+			resets = <&rst HPS2FPGA_RESET>;
+			clocks = <&l4_main_clk>;
+		};
+
+		fpgamgr0: fpgamgr@ff706000 {
+			compatible = "altr,socfpga-fpga-mgr";
+			reg = <0xff706000 0x1000
+			       0xffb90000 0x4>;
+			interrupts = <0 175 4>;
+		};
 
 		gmac0: ethernet@ff700000 {
 			compatible = "altr,socfpga-stmmac", "snps,dwmac-3.70a", "snps,dwmac";
@@ -477,12 +550,14 @@
 			interrupts = <0 115 4>;
 			interrupt-names = "macirq";
 			mac-address = [00 00 00 00 00 00];/* Filled in by U-Boot */
-			clocks = <&emac0_clk>;
+			clocks = <&emac_0_clk>;
 			clock-names = "stmmaceth";
 			resets = <&rst EMAC0_RESET>;
 			reset-names = "stmmaceth";
 			snps,multicast-filter-bins = <256>;
 			snps,perfect-filter-entries = <128>;
+			tx-fifo-depth = <4096>;
+			rx-fifo-depth = <4096>;
 			status = "disabled";
 		};
 
@@ -493,60 +568,14 @@
 			interrupts = <0 120 4>;
 			interrupt-names = "macirq";
 			mac-address = [00 00 00 00 00 00];/* Filled in by U-Boot */
-			clocks = <&emac1_clk>;
+			clocks = <&emac_1_clk>;
 			clock-names = "stmmaceth";
 			resets = <&rst EMAC1_RESET>;
 			reset-names = "stmmaceth";
 			snps,multicast-filter-bins = <256>;
 			snps,perfect-filter-entries = <128>;
-			status = "disabled";
-		};
-
-		i2c0: i2c@ffc04000 {
-			#address-cells = <1>;
-			#size-cells = <0>;
-			compatible = "snps,designware-i2c";
-			reg = <0xffc04000 0x1000>;
-			clocks = <&l4_sp_clk>;
-			resets = <&rst I2C0_RESET>;
-			reset-names = "i2c";
-			interrupts = <0 158 0x4>;
-			status = "disabled";
-		};
-
-		i2c1: i2c@ffc05000 {
-			#address-cells = <1>;
-			#size-cells = <0>;
-			compatible = "snps,designware-i2c";
-			reg = <0xffc05000 0x1000>;
-			clocks = <&l4_sp_clk>;
-			resets = <&rst I2C1_RESET>;
-			reset-names = "i2c";
-			interrupts = <0 159 0x4>;
-			status = "disabled";
-		};
-
-		i2c2: i2c@ffc06000 {
-			#address-cells = <1>;
-			#size-cells = <0>;
-			compatible = "snps,designware-i2c";
-			reg = <0xffc06000 0x1000>;
-			clocks = <&l4_sp_clk>;
-			resets = <&rst I2C2_RESET>;
-			reset-names = "i2c";
-			interrupts = <0 160 0x4>;
-			status = "disabled";
-		};
-
-		i2c3: i2c@ffc07000 {
-			#address-cells = <1>;
-			#size-cells = <0>;
-			compatible = "snps,designware-i2c";
-			reg = <0xffc07000 0x1000>;
-			clocks = <&l4_sp_clk>;
-			resets = <&rst I2C3_RESET>;
-			reset-names = "i2c";
-			interrupts = <0 161 0x4>;
+			tx-fifo-depth = <4096>;
+			rx-fifo-depth = <4096>;
 			status = "disabled";
 		};
 
@@ -555,12 +584,11 @@
 			#size-cells = <0>;
 			compatible = "snps,dw-apb-gpio";
 			reg = <0xff708000 0x1000>;
-			clocks = <&per_base_clk>;
+			clocks = <&l4_mp_clk>;
 			status = "disabled";
 
 			porta: gpio-controller@0 {
 				compatible = "snps,dw-apb-gpio-port";
-				bank-name = "porta";
 				gpio-controller;
 				#gpio-cells = <2>;
 				snps,nr-gpios = <29>;
@@ -576,12 +604,11 @@
 			#size-cells = <0>;
 			compatible = "snps,dw-apb-gpio";
 			reg = <0xff709000 0x1000>;
-			clocks = <&per_base_clk>;
+			clocks = <&l4_mp_clk>;
 			status = "disabled";
 
 			portb: gpio-controller@0 {
 				compatible = "snps,dw-apb-gpio-port";
-				bank-name = "portb";
 				gpio-controller;
 				#gpio-cells = <2>;
 				snps,nr-gpios = <29>;
@@ -597,12 +624,11 @@
 			#size-cells = <0>;
 			compatible = "snps,dw-apb-gpio";
 			reg = <0xff70a000 0x1000>;
-			clocks = <&per_base_clk>;
+			clocks = <&l4_mp_clk>;
 			status = "disabled";
 
 			portc: gpio-controller@0 {
 				compatible = "snps,dw-apb-gpio-port";
-				bank-name = "portc";
 				gpio-controller;
 				#gpio-cells = <2>;
 				snps,nr-gpios = <27>;
@@ -613,17 +639,70 @@
 			};
 		};
 
-		sdr: sdr@ffc25000 {
-			compatible = "syscon";
-			reg = <0xffc25000 0x1000>;
+		i2c0: i2c@ffc04000 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			compatible = "snps,designware-i2c";
+			reg = <0xffc04000 0x1000>;
+			resets = <&rst I2C0_RESET>;
+			clocks = <&l4_sp_clk>;
+			interrupts = <0 158 0x4>;
+			status = "disabled";
 		};
 
-		sdramedac {
-			compatible = "altr,sdram-edac";
-			altr,sdr-syscon = <&sdr>;
-			interrupts = <0 39 4>;
+		i2c1: i2c@ffc05000 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			compatible = "snps,designware-i2c";
+			reg = <0xffc05000 0x1000>;
+			resets = <&rst I2C1_RESET>;
+			clocks = <&l4_sp_clk>;
+			interrupts = <0 159 0x4>;
+			status = "disabled";
+		};
+
+		i2c2: i2c@ffc06000 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			compatible = "snps,designware-i2c";
+			reg = <0xffc06000 0x1000>;
+			resets = <&rst I2C2_RESET>;
+			clocks = <&l4_sp_clk>;
+			interrupts = <0 160 0x4>;
+			status = "disabled";
+		};
+
+		i2c3: i2c@ffc07000 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			compatible = "snps,designware-i2c";
+			reg = <0xffc07000 0x1000>;
+			resets = <&rst I2C3_RESET>;
+			clocks = <&l4_sp_clk>;
+			interrupts = <0 161 0x4>;
+			status = "disabled";
 		};
 
+		eccmgr: eccmgr {
+			compatible = "altr,socfpga-ecc-manager";
+			#address-cells = <1>;
+			#size-cells = <1>;
+			ranges;
+
+			l2-ecc@ffd08140 {
+				compatible = "altr,socfpga-l2-ecc";
+				reg = <0xffd08140 0x4>;
+				interrupts = <0 36 1>, <0 37 1>;
+			};
+
+			ocram-ecc@ffd08144 {
+				compatible = "altr,socfpga-ocram-ecc";
+				reg = <0xffd08144 0x4>;
+				iram = <&ocram>;
+				interrupts = <0 178 1>, <0 179 1>;
+			};
+		};
+
 		L2: l2-cache@fffef000 {
 			compatible = "arm,pl310-cache";
 			reg = <0xfffef000 0x1000>;
@@ -632,36 +711,89 @@
 			cache-level = <2>;
 			arm,tag-latency = <1 1 1>;
 			arm,data-latency = <2 1 1>;
+			prefetch-data = <1>;
+			prefetch-instr = <1>;
+			arm,shared-override;
+			arm,double-linefill = <1>;
+			arm,double-linefill-incr = <0>;
+			arm,double-linefill-wrap = <1>;
+			arm,prefetch-drop = <0>;
+			arm,prefetch-offset = <7>;
+		};
+
+		l3regs@0xff800000 {
+			compatible = "altr,l3regs", "syscon";
+			reg = <0xff800000 0x1000>;
 		};
 
-		mmc0: dwmmc0@ff704000 {
+		mmc: dwmmc0@ff704000 {
 			compatible = "altr,socfpga-dw-mshc";
 			reg = <0xff704000 0x1000>;
 			interrupts = <0 139 4>;
 			fifo-depth = <0x400>;
 			#address-cells = <1>;
 			#size-cells = <0>;
-			clocks = <&l4_mp_clk>, <&sdmmc_clk>;
+			clocks = <&l4_mp_clk>, <&sdmmc_clk_divided>;
 			clock-names = "biu", "ciu";
+			status = "disabled";
+		};
+
+		nand0: nand@ff900000 {
+			#address-cells = <0x1>;
+			#size-cells = <0x1>;
+			compatible = "altr,socfpga-denali-nand";
+			reg = <0xff900000 0x100000>,
+			      <0xffb80000 0x10000>;
+			reg-names = "nand_data", "denali_reg";
+			interrupts = <0x0 0x90 0x4>;
+			dma-mask = <0xffffffff>;
+			clocks = <&nand_clk>, <&nand_x_clk>, <&nand_ecc_clk>;
+			clock-names = "nand", "nand_x", "ecc";
+			status = "disabled";
+		};
+
+		ocram: sram@ffff0000 {
+			compatible = "mmio-sram";
+			reg = <0xffff0000 0x10000>;
 		};
 
 		qspi: spi@ff705000 {
 			compatible = "cdns,qspi-nor";
-			#address-cells = <1>;
+                        #address-cells = <1>;
 			#size-cells = <0>;
 			reg = <0xff705000 0x1000>,
-				<0xffa00000 0x1000>;
+			      <0xffa00000 0x1000>;
 			interrupts = <0 151 4>;
-			clocks = <&qspi_clk>;
-			ext-decoder = <0>;  /* external decoder */
-			num-cs = <4>;
 			cdns,fifo-depth = <128>;
 			cdns,fifo-width = <4>;
 			cdns,trigger-address = <0x00000000>;
-			bus-num = <2>;
+			clocks = <&qspi_clk>;
 			status = "disabled";
 		};
 
+		rst: rstmgr@ffd05000 {
+			#reset-cells = <1>;
+			compatible = "altr,rst-mgr";
+			reg = <0xffd05000 0x1000>;
+			altr,modrst-offset = <0x10>;
+		};
+
+		scu: snoop-control-unit@fffec000 {
+			compatible = "arm,cortex-a9-scu";
+			reg = <0xfffec000 0x100>;
+		};
+
+		sdr: sdr@ffc25000 {
+			compatible = "altr,sdr-ctl", "syscon";
+			reg = <0xffc25000 0x1000>;
+		};
+
+		sdramedac {
+			compatible = "altr,sdram-edac";
+			altr,sdr-syscon = <&sdr>;
+			interrupts = <0 39 4>;
+		};
+
 		spi0: spi@fff00000 {
 			compatible = "snps,dw-apb-ssi";
 			#address-cells = <1>;
@@ -669,10 +801,7 @@
 			reg = <0xfff00000 0x1000>;
 			interrupts = <0 154 4>;
 			num-cs = <4>;
-			bus-num = <0>;
-			tx-dma-channel = <&pdma 16>;
-			rx-dma-channel = <&pdma 17>;
-			clocks = <&per_base_clk>;
+			clocks = <&spi_m_clk>;
 			status = "disabled";
 		};
 
@@ -681,20 +810,22 @@
 			#address-cells = <1>;
 			#size-cells = <0>;
 			reg = <0xfff01000 0x1000>;
-			interrupts = <0 156 4>;
+			interrupts = <0 155 4>;
 			num-cs = <4>;
-			bus-num = <1>;
-			tx-dma-channel = <&pdma 20>;
-			rx-dma-channel = <&pdma 21>;
-			clocks = <&per_base_clk>;
+			clocks = <&spi_m_clk>;
 			status = "disabled";
 		};
 
+		sysmgr: sysmgr@ffd08000 {
+			compatible = "altr,sys-mgr", "syscon";
+			reg = <0xffd08000 0x4000>;
+		};
+
 		/* Local timer */
 		timer@fffec600 {
 			compatible = "arm,cortex-a9-twd-timer";
 			reg = <0xfffec600 0x100>;
-			interrupts = <1 13 0xf04>;
+			interrupts = <1 13 0xf01>;
 			clocks = <&mpu_periph_clk>;
 		};
 
@@ -704,6 +835,8 @@
 			reg = <0xffc08000 0x1000>;
 			clocks = <&l4_sp_clk>;
 			clock-names = "timer";
+			resets = <&rst SPTIMER0_RESET>;
+			reset-names = "timer";
 		};
 
 		timer1: timer1@ffc09000 {
@@ -712,6 +845,8 @@
 			reg = <0xffc09000 0x1000>;
 			clocks = <&l4_sp_clk>;
 			clock-names = "timer";
+			resets = <&rst SPTIMER1_RESET>;
+			reset-names = "timer";
 		};
 
 		timer2: timer2@ffd00000 {
@@ -720,6 +855,8 @@
 			reg = <0xffd00000 0x1000>;
 			clocks = <&osc1>;
 			clock-names = "timer";
+			resets = <&rst OSC1TIMER0_RESET>;
+			reset-names = "timer";
 		};
 
 		timer3: timer3@ffd01000 {
@@ -728,6 +865,8 @@
 			reg = <0xffd01000 0x1000>;
 			clocks = <&osc1>;
 			clock-names = "timer";
+			resets = <&rst OSC1TIMER1_RESET>;
+			reset-names = "timer";
 		};
 
 		uart0: serial0@ffc02000 {
@@ -737,7 +876,9 @@
 			reg-shift = <2>;
 			reg-io-width = <4>;
 			clocks = <&l4_sp_clk>;
-			clock-frequency = <100000000>;
+			dmas = <&pdma 28>,
+			       <&pdma 29>;
+			dma-names = "tx", "rx";
 		};
 
 		uart1: serial1@ffc03000 {
@@ -747,16 +888,12 @@
 			reg-shift = <2>;
 			reg-io-width = <4>;
 			clocks = <&l4_sp_clk>;
-			clock-frequency = <100000000>;
+			dmas = <&pdma 30>,
+			       <&pdma 31>;
+			dma-names = "tx", "rx";
 		};
 
-		rst: rstmgr@ffd05000 {
-			#reset-cells = <1>;
-			compatible = "altr,rst-mgr";
-			reg = <0xffd05000 0x1000>;
-		};
-
-		usbphy0: usbphy@0 {
+		usbphy0: usbphy {
 			#phy-cells = <0>;
 			compatible = "usb-nop-xceiv";
 			status = "okay";
@@ -768,6 +905,8 @@
 			interrupts = <0 125 4>;
 			clocks = <&usb_mp_clk>;
 			clock-names = "otg";
+			resets = <&rst USB0_RESET>;
+			reset-names = "dwc2";
 			phys = <&usbphy0>;
 			phy-names = "usb2-phy";
 			status = "disabled";
@@ -779,6 +918,8 @@
 			interrupts = <0 128 4>;
 			clocks = <&usb_mp_clk>;
 			clock-names = "otg";
+			resets = <&rst USB1_RESET>;
+			reset-names = "dwc2";
 			phys = <&usbphy0>;
 			phy-names = "usb2-phy";
 			status = "disabled";
@@ -799,10 +940,5 @@
 			clocks = <&osc1>;
 			status = "disabled";
 		};
-
-		sysmgr: sysmgr@ffd08000 {
-			compatible = "altr,sys-mgr", "syscon";
-			reg = <0xffd08000 0x4000>;
-		};
 	};
 };
diff --git a/arch/arm/dts/socfpga_arria5.dtsi b/arch/arm/dts/socfpga_arria5.dtsi
index b117383..22dbf07 100644
--- a/arch/arm/dts/socfpga_arria5.dtsi
+++ b/arch/arm/dts/socfpga_arria5.dtsi
@@ -1,6 +1,6 @@
-// SPDX-License-Identifier: GPL-2.0+
+// SPDX-License-Identifier: GPL-2.0
 /*
- *  Copyright (C) 2013 Altera Corporation <www.altera.com>
+ * Copyright (C) 2013 Altera Corporation <www.altera.com>
  */
 
 /dts-v1/;
@@ -19,13 +19,10 @@
 		};
 
 		mmc0: dwmmc0@ff704000 {
-			num-slots = <1>;
 			broken-cd;
 			bus-width = <4>;
 			cap-mmc-highspeed;
 			cap-sd-highspeed;
-			drvsel = <3>;
-			smplsel = <0>;
 		};
 
 		sysmgr@ffd08000 {
@@ -33,3 +30,7 @@
 		};
 	};
 };
+
+&watchdog0 {
+	status = "okay";
+};
diff --git a/arch/arm/dts/socfpga_arria5_socdk-u-boot.dtsi b/arch/arm/dts/socfpga_arria5_socdk-u-boot.dtsi
new file mode 100644
index 0000000..c44d1ee
--- /dev/null
+++ b/arch/arm/dts/socfpga_arria5_socdk-u-boot.dtsi
@@ -0,0 +1,56 @@
+// SPDX-License-Identifier: GPL-2.0+
+/*
+ * U-Boot additions
+ *
+ * Copyright (C) 2013 Altera Corporation <www.altera.com>
+ * Copyright (c) 2018 Simon Goldschmidt
+ */
+
+/{
+	aliases {
+		spi0 = "/soc/spi@ff705000";
+		udc0 = &usb1;
+	};
+
+	soc {
+		u-boot,dm-pre-reloc;
+	};
+};
+
+&watchdog0 {
+	status = "disabled";
+};
+
+&mmc {
+	u-boot,dm-pre-reloc;
+};
+
+&qspi {
+	u-boot,dm-pre-reloc;
+};
+
+&flash {
+	compatible = "n25q00", "spi-flash";
+	u-boot,dm-pre-reloc;
+};
+
+&uart0 {
+	clock-frequency = <100000000>;
+	u-boot,dm-pre-reloc;
+};
+
+&uart1 {
+	clock-frequency = <100000000>;
+};
+
+&porta {
+	bank-name = "porta";
+};
+
+&portb {
+	bank-name = "portb";
+};
+
+&portc {
+	bank-name = "portc";
+};
diff --git a/arch/arm/dts/socfpga_arria5_socdk.dts b/arch/arm/dts/socfpga_arria5_socdk.dts
index 6f4de2f..90e676e 100644
--- a/arch/arm/dts/socfpga_arria5_socdk.dts
+++ b/arch/arm/dts/socfpga_arria5_socdk.dts
@@ -1,6 +1,6 @@
 // SPDX-License-Identifier: GPL-2.0+
 /*
- *  Copyright (C) 2013 Altera Corporation <www.altera.com>
+ * Copyright (C) 2013 Altera Corporation <www.altera.com>
  */
 
 #include "socfpga_arria5.dtsi"
@@ -10,34 +10,52 @@
 	compatible = "altr,socfpga-arria5", "altr,socfpga";
 
 	chosen {
-		bootargs = "console=ttyS0,115200";
+		bootargs = "earlyprintk";
 		stdout-path = "serial0:115200n8";
 	};
 
-	memory {
+	memory@0 {
 		name = "memory";
 		device_type = "memory";
 		reg = <0x0 0x40000000>; /* 1GB */
 	};
 
 	aliases {
-		/* this allow the ethaddr uboot environment variable contents
-		 * to be added to the gmac1 device tree blob.
-		 */
+		/* this allow the ethaddr uboot environmnet variable contents
+		* to be added to the gmac1 device tree blob.
+		*/
 		ethernet0 = &gmac1;
-		udc0 = &usb1;
 	};
 
+	leds {
+		compatible = "gpio-leds";
+		hps0 {
+			label = "hps_led0";
+			gpios = <&porta 0 1>;
+		};
+
+		hps1 {
+			label = "hps_led1";
+			gpios = <&portb 11 1>;
+		};
+
+		hps2 {
+			label = "hps_led2";
+			gpios = <&porta 17 1>;
+		};
+
+		hps3 {
+			label = "hps_led3";
+			gpios = <&porta 18 1>;
+		};
+	};
+
 	regulator_3_3v: 3-3-v-regulator {
 		compatible = "regulator-fixed";
 		regulator-name = "3.3V";
 		regulator-min-microvolt = <3300000>;
 		regulator-max-microvolt = <3300000>;
 	};
-
-	soc {
-		u-boot,dm-pre-reloc;
-	};
 };
 
 &gmac1 {
@@ -54,8 +72,28 @@
 	rxc-skew-ps = <2000>;
 };
 
+&gpio0 {
+	status = "okay";
+};
+
+&gpio1 {
+	status = "okay";
+};
+
+&gpio2 {
+	status = "okay";
+};
+
 &i2c0 {
 	status = "okay";
+	clock-frequency = <100000>;
+
+	/*
+	 * adjust the falling times to decrease the i2c frequency to 50Khz
+	 * because the LCD module does not work at the standard 100Khz
+	 */
+	i2c-sda-falling-time-ns = <5000>;
+	i2c-scl-falling-time-ns = <5000>;
 
 	eeprom@51 {
 		compatible = "atmel,24c32";
@@ -72,35 +110,42 @@
 &mmc0 {
 	vmmc-supply = <&regulator_3_3v>;
 	vqmmc-supply = <&regulator_3_3v>;
-	bus-width = <4>;
-	u-boot,dm-pre-reloc;
-};
-
-&usb1 {
 	status = "okay";
 };
 
 &qspi {
 	status = "okay";
-	u-boot,dm-pre-reloc;
 
-	flash0: n25q00@0 {
-		u-boot,dm-pre-reloc;
+	flash: flash@0 {
 		#address-cells = <1>;
 		#size-cells = <1>;
-		compatible = "n25q00", "spi-flash";
-		reg = <0>;      /* chip select */
-		spi-max-frequency = <50000000>;
+		compatible = "n25q256a";
+		reg = <0>;
+		spi-max-frequency = <100000000>;
+
 		m25p,fast-read;
-		page-size = <256>;
-		block-size = <16>; /* 2^16, 64KB */
+		cdns,page-size = <256>;
+		cdns,block-size = <16>;
+		cdns,read-delay = <4>;
 		cdns,tshsl-ns = <50>;
 		cdns,tsd2d-ns = <50>;
 		cdns,tchsh-ns = <4>;
 		cdns,tslch-ns = <4>;
+
+		partition@qspi-boot {
+			/* 8MB for raw data. */
+			label = "Flash 0 Raw Data";
+			reg = <0x0 0x800000>;
+		};
+
+		partition@qspi-rootfs {
+			/* 120MB for jffs2 data. */
+			label = "Flash 0 jffs2 Filesystem";
+			reg = <0x800000 0x7800000>;
+		};
 	};
 };
 
-&uart0 {
-	u-boot,dm-pre-reloc;
+&usb1 {
+	status = "okay";
 };
diff --git a/arch/arm/dts/socfpga_cyclone5.dtsi b/arch/arm/dts/socfpga_cyclone5.dtsi
index 8f356cb..319a71e 100644
--- a/arch/arm/dts/socfpga_cyclone5.dtsi
+++ b/arch/arm/dts/socfpga_cyclone5.dtsi
@@ -1,6 +1,6 @@
 // SPDX-License-Identifier: GPL-2.0+
 /*
- *  Copyright (C) 2012 Altera Corporation <www.altera.com>
+ * Copyright (C) 2012 Altera Corporation <www.altera.com>
  */
 
 /dts-v1/;
@@ -19,13 +19,10 @@
 		};
 
 		mmc0: dwmmc0@ff704000 {
-			num-slots = <1>;
 			broken-cd;
 			bus-width = <4>;
 			cap-mmc-highspeed;
 			cap-sd-highspeed;
-			drvsel = <3>;
-			smplsel = <0>;
 		};
 
 		sysmgr@ffd08000 {
@@ -33,3 +30,7 @@
 		};
 	};
 };
+
+&watchdog0 {
+	status = "okay";
+};
diff --git a/arch/arm/dts/socfpga_cyclone5_dbm_soc1.dts b/arch/arm/dts/socfpga_cyclone5_dbm_soc1.dts
index 139a70f..a387071 100644
--- a/arch/arm/dts/socfpga_cyclone5_dbm_soc1.dts
+++ b/arch/arm/dts/socfpga_cyclone5_dbm_soc1.dts
@@ -47,9 +47,20 @@
 	status = "okay";
 };
 
+&porta {
+	bank-name = "porta";
+};
+
+&portb {
+	bank-name = "portb";
+};
+
+&portc {
+	bank-name = "portc";
+};
+
 &mmc0 {
 	status = "okay";
-	bus-width = <4>;
 	u-boot,dm-pre-reloc;
 };
 
@@ -61,3 +72,7 @@
 &uart0 {
 	u-boot,dm-pre-reloc;
 };
+
+&watchdog0 {
+	status = "disabled";
+};
diff --git a/arch/arm/dts/socfpga_cyclone5_de0_nano_soc-u-boot.dtsi b/arch/arm/dts/socfpga_cyclone5_de0_nano_soc-u-boot.dtsi
new file mode 100644
index 0000000..08d81da
--- /dev/null
+++ b/arch/arm/dts/socfpga_cyclone5_de0_nano_soc-u-boot.dtsi
@@ -0,0 +1,46 @@
+// SPDX-License-Identifier: GPL-2.0+
+/*
+ * U-Boot additions
+ *
+ * Copyright Altera Corporation (C) 2015
+ * Copyright (c) 2018 Simon Goldschmidt
+ */
+
+/{
+	aliases {
+		udc0 = &usb1;
+	};
+
+	soc {
+		u-boot,dm-pre-reloc;
+	};
+};
+
+&watchdog0 {
+	status = "disabled";
+};
+
+&mmc {
+	u-boot,dm-pre-reloc;
+};
+
+&uart0 {
+	clock-frequency = <100000000>;
+	u-boot,dm-pre-reloc;
+};
+
+&uart1 {
+	clock-frequency = <100000000>;
+};
+
+&porta {
+	bank-name = "porta";
+};
+
+&portb {
+	bank-name = "portb";
+};
+
+&portc {
+	bank-name = "portc";
+};
diff --git a/arch/arm/dts/socfpga_cyclone5_de0_nano_soc.dts b/arch/arm/dts/socfpga_cyclone5_de0_nano_soc.dts
index d504150..67076e1 100644
--- a/arch/arm/dts/socfpga_cyclone5_de0_nano_soc.dts
+++ b/arch/arm/dts/socfpga_cyclone5_de0_nano_soc.dts
@@ -1,32 +1,43 @@
-// SPDX-License-Identifier: GPL-2.0+
+// SPDX-License-Identifier: GPL-2.0
 /*
- * Copyright Altera Corporation (C) 2015
+ * Copyright Altera Corporation (C) 2015. All rights reserved.
  */
 
 #include "socfpga_cyclone5.dtsi"
 
 / {
-	model = "Terasic DE0-Nano(Atlas)";
-	compatible = "altr,socfpga-cyclone5", "altr,socfpga";
+	model = "Terasic DE-0(Atlas)";
+	compatible = "terasic,de0-atlas", "altr,socfpga-cyclone5", "altr,socfpga";
 
 	chosen {
-		bootargs = "console=ttyS0,115200";
+		bootargs = "earlyprintk";
 		stdout-path = "serial0:115200n8";
 	};
 
+	memory@0 {
+		name = "memory";
+		device_type = "memory";
+		reg = <0x0 0x40000000>; /* 1GB */
+	};
+
 	aliases {
 		ethernet0 = &gmac1;
-		udc0 = &usb1;
 	};
 
-	memory {
-		name = "memory";
-		device_type = "memory";
-		reg = <0x0 0x40000000>; /* 1GB */
+	regulator_3_3v: 3-3-v-regulator {
+		compatible = "regulator-fixed";
+		regulator-name = "3.3V";
+		regulator-min-microvolt = <3300000>;
+		regulator-max-microvolt = <3300000>;
 	};
 
-	soc {
-		u-boot,dm-pre-reloc;
+	leds {
+		compatible = "gpio-leds";
+		hps0 {
+			label = "hps_led0";
+			gpios = <&portb 24 0>;
+			linux,default-trigger = "heartbeat";
+		};
 	};
 };
 
@@ -34,14 +45,20 @@
 	status = "okay";
 	phy-mode = "rgmii";
 
+	txd0-skew-ps = <0>; /* -420ps */
+	txd1-skew-ps = <0>; /* -420ps */
+	txd2-skew-ps = <0>; /* -420ps */
+	txd3-skew-ps = <0>; /* -420ps */
+	rxd0-skew-ps = <420>; /* 0ps */
+	rxd1-skew-ps = <420>; /* 0ps */
+	rxd2-skew-ps = <420>; /* 0ps */
+	rxd3-skew-ps = <420>; /* 0ps */
+	txen-skew-ps = <0>; /* -420ps */
+	txc-skew-ps = <1860>; /* 960ps */
+	rxdv-skew-ps = <420>; /* 0ps */
+	rxc-skew-ps = <1680>; /* 780ps */
+
-	rxd0-skew-ps = <420>;
-	rxd1-skew-ps = <420>;
-	rxd2-skew-ps = <420>;
-	rxd3-skew-ps = <420>;
-	txen-skew-ps = <0>;
-	txc-skew-ps = <1860>;
-	rxdv-skew-ps = <420>;
-	rxc-skew-ps = <1680>;
+	max-frame-size = <3800>;
 };
 
 &gpio0 {
@@ -58,8 +75,9 @@
 
 &i2c0 {
 	status = "okay";
+	clock-frequency = <100000>;
 
-	dxl345: adxl345@0 {
+	adxl345: adxl345@53 {
 		compatible = "adi,adxl345";
 		reg = <0x53>;
 
@@ -69,14 +87,15 @@
 };
 
 &mmc0 {
+	vmmc-supply = <&regulator_3_3v>;
+	vqmmc-supply = <&regulator_3_3v>;
 	status = "okay";
-	u-boot,dm-pre-reloc;
 };
 
-&usb1 {
+&uart0 {
 	status = "okay";
 };
 
-&uart0 {
-	u-boot,dm-pre-reloc;
+&usb1 {
+	status = "okay";
 };
diff --git a/arch/arm/dts/socfpga_cyclone5_de10_nano.dts b/arch/arm/dts/socfpga_cyclone5_de10_nano.dts
index d4dd9e9b..e910574 100644
--- a/arch/arm/dts/socfpga_cyclone5_de10_nano.dts
+++ b/arch/arm/dts/socfpga_cyclone5_de10_nano.dts
@@ -58,6 +58,18 @@
 	status = "okay";
 };
 
+&porta {
+	bank-name = "porta";
+};
+
+&portb {
+	bank-name = "portb";
+};
+
+&portc {
+	bank-name = "portc";
+};
+
 &mmc0 {
 	status = "okay";
 	u-boot,dm-pre-reloc;
@@ -70,3 +82,7 @@
 &uart0 {
 	u-boot,dm-pre-reloc;
 };
+
+&watchdog0 {
+	status = "disabled";
+};
diff --git a/arch/arm/dts/socfpga_cyclone5_de1_soc.dts b/arch/arm/dts/socfpga_cyclone5_de1_soc.dts
index f622922..4f076bc 100644
--- a/arch/arm/dts/socfpga_cyclone5_de1_soc.dts
+++ b/arch/arm/dts/socfpga_cyclone5_de1_soc.dts
@@ -56,6 +56,18 @@
 	status = "okay";
 };
 
+&porta {
+	bank-name = "porta";
+};
+
+&portb {
+	bank-name = "portb";
+};
+
+&portc {
+	bank-name = "portc";
+};
+
 &mmc0 {
 	status = "okay";
 	u-boot,dm-pre-reloc;
@@ -68,3 +80,7 @@
 &uart0 {
 	u-boot,dm-pre-reloc;
 };
+
+&watchdog0 {
+	status = "disabled";
+};
diff --git a/arch/arm/dts/socfpga_cyclone5_is1.dts b/arch/arm/dts/socfpga_cyclone5_is1.dts
index 4e94d86..b7054bf 100644
--- a/arch/arm/dts/socfpga_cyclone5_is1.dts
+++ b/arch/arm/dts/socfpga_cyclone5_is1.dts
@@ -55,6 +55,10 @@
 	status = "okay";
 };
 
+&porta {
+	bank-name = "porta";
+};
+
 &i2c0 {
 	status = "okay";
 
@@ -107,3 +111,7 @@
 &uart0 {
 	u-boot,dm-pre-reloc;
 };
+
+&watchdog0 {
+	status = "disabled";
+};
diff --git a/arch/arm/dts/socfpga_cyclone5_socdk-u-boot.dtsi b/arch/arm/dts/socfpga_cyclone5_socdk-u-boot.dtsi
new file mode 100644
index 0000000..9436e0f
--- /dev/null
+++ b/arch/arm/dts/socfpga_cyclone5_socdk-u-boot.dtsi
@@ -0,0 +1,72 @@
+// SPDX-License-Identifier: GPL-2.0+
+/*
+ * U-Boot additions
+ *
+ * Copyright (C) 2012 Altera Corporation <www.altera.com>
+ * Copyright (c) 2018 Simon Goldschmidt
+ */
+
+/{
+	aliases {
+		spi0 = "/soc/spi@ff705000";
+		udc0 = &usb1;
+	};
+
+	soc {
+		u-boot,dm-pre-reloc;
+	};
+};
+
+&can0 {
+	status = "okay";
+};
+
+&watchdog0 {
+	status = "disabled";
+};
+
+&mmc {
+	u-boot,dm-pre-reloc;
+};
+
+&qspi {
+	u-boot,dm-pre-reloc;
+};
+
+&flash0 {
+	compatible = "n25q00", "spi-flash";
+	u-boot,dm-pre-reloc;
+
+	partition@qspi-boot {
+		/* 8MB for raw data. */
+		label = "Flash 0 Raw Data";
+		reg = <0x0 0x800000>;
+	};
+
+	partition@qspi-rootfs {
+		/* 120MB for jffs2 data. */
+		label = "Flash 0 jffs2 Filesystem";
+		reg = <0x800000 0x7800000>;
+	};
+};
+
+&uart0 {
+	clock-frequency = <100000000>;
+	u-boot,dm-pre-reloc;
+};
+
+&uart1 {
+	clock-frequency = <100000000>;
+};
+
+&porta {
+	bank-name = "porta";
+};
+
+&portb {
+	bank-name = "portb";
+};
+
+&portc {
+	bank-name = "portc";
+};
diff --git a/arch/arm/dts/socfpga_cyclone5_socdk.dts b/arch/arm/dts/socfpga_cyclone5_socdk.dts
index c28be67..6f138b2 100644
--- a/arch/arm/dts/socfpga_cyclone5_socdk.dts
+++ b/arch/arm/dts/socfpga_cyclone5_socdk.dts
@@ -1,43 +1,65 @@
 // SPDX-License-Identifier: GPL-2.0+
 /*
- *  Copyright (C) 2012 Altera Corporation <www.altera.com>
+ * Copyright (C) 2012 Altera Corporation <www.altera.com>
  */
 
 #include "socfpga_cyclone5.dtsi"
 
 / {
 	model = "Altera SOCFPGA Cyclone V SoC Development Kit";
-	compatible = "altr,socfpga-cyclone5", "altr,socfpga";
+	compatible = "altr,socfpga-cyclone5-socdk", "altr,socfpga-cyclone5", "altr,socfpga";
 
 	chosen {
-		bootargs = "console=ttyS0,115200";
+		bootargs = "earlyprintk";
 		stdout-path = "serial0:115200n8";
 	};
 
-	memory {
+	memory@0 {
 		name = "memory";
 		device_type = "memory";
 		reg = <0x0 0x40000000>; /* 1GB */
 	};
 
 	aliases {
-		/* this allow the ethaddr uboot environment variable contents
+		/* this allow the ethaddr uboot environmnet variable contents
 		 * to be added to the gmac1 device tree blob.
 		 */
 		ethernet0 = &gmac1;
-		udc0 = &usb1;
 	};
 
+	leds {
+		compatible = "gpio-leds";
+		hps0 {
+			label = "hps_led0";
+			gpios = <&portb 15 1>;
+		};
+
+		hps1 {
+			label = "hps_led1";
+			gpios = <&portb 14 1>;
+		};
+
+		hps2 {
+			label = "hps_led2";
+			gpios = <&portb 13 1>;
+		};
+
+		hps3 {
+			label = "hps_led3";
+			gpios = <&portb 12 1>;
+		};
+	};
+
 	regulator_3_3v: 3-3-v-regulator {
 		compatible = "regulator-fixed";
 		regulator-name = "3.3V";
 		regulator-min-microvolt = <3300000>;
 		regulator-max-microvolt = <3300000>;
 	};
+};
 
-	soc {
-		u-boot,dm-pre-reloc;
-	};
+&can0 {
+	status = "okay";
 };
 
 &gmac1 {
@@ -68,6 +90,14 @@
 
 &i2c0 {
 	status = "okay";
+	clock-frequency = <100000>;
+
+	/*
+	 * adjust the falling times to decrease the i2c frequency to 50Khz
+	 * because the LCD module does not work at the standard 100Khz
+	 */
+	i2c-sda-falling-time-ns = <5000>;
+	i2c-scl-falling-time-ns = <5000>;
 
 	eeprom@51 {
 		compatible = "atmel,24c32";
@@ -82,39 +112,55 @@
 };
 
 &mmc0 {
-	status = "okay";
-	u-boot,dm-pre-reloc;
-
 	cd-gpios = <&portb 18 0>;
 	vmmc-supply = <&regulator_3_3v>;
 	vqmmc-supply = <&regulator_3_3v>;
+	status = "okay";
 };
 
 &qspi {
 	status = "okay";
-	u-boot,dm-pre-reloc;
 
 	flash0: n25q00@0 {
-		u-boot,dm-pre-reloc;
 		#address-cells = <1>;
 		#size-cells = <1>;
-		compatible = "n25q00", "spi-flash";
-		reg = <0>;      /* chip select */
+		compatible = "n25q00";
+		reg = <0>;	/* chip select */
 		spi-max-frequency = <100000000>;
+
 		m25p,fast-read;
-		page-size = <256>;
-		block-size = <16>; /* 2^16, 64KB */
+		cdns,page-size = <256>;
+		cdns,block-size = <16>;
+		cdns,read-delay = <4>;
 		cdns,tshsl-ns = <50>;
 		cdns,tsd2d-ns = <50>;
 		cdns,tchsh-ns = <4>;
 		cdns,tslch-ns = <4>;
+
+		partition@qspi-boot {
+			/* 8MB for raw data. */
+			label = "Flash 0 Raw Data";
+			reg = <0x0 0x800000>;
+		};
+
+		partition@qspi-rootfs {
+			/* 120MB for jffs2 data. */
+			label = "Flash 0 jffs2 Filesystem";
+			reg = <0x800000 0x7800000>;
+		};
 	};
 };
 
-&usb1 {
+&spi0 {
 	status = "okay";
+
+	spidev@0 {
+		compatible = "rohm,dh2228fv";
+		reg = <0>;
+		spi-max-frequency = <1000000>;
+	};
 };
 
-&uart0 {
-	u-boot,dm-pre-reloc;
+&usb1 {
+	status = "okay";
 };
diff --git a/arch/arm/dts/socfpga_cyclone5_sockit-u-boot.dtsi b/arch/arm/dts/socfpga_cyclone5_sockit-u-boot.dtsi
new file mode 100644
index 0000000..648f1bd
--- /dev/null
+++ b/arch/arm/dts/socfpga_cyclone5_sockit-u-boot.dtsi
@@ -0,0 +1,56 @@
+// SPDX-License-Identifier: GPL-2.0+
+/*
+ * U-Boot additions
+ *
+ * Copyright (C) 2013 Steffen Trumtrar <s.trumtrar@pengutronix.de>
+ * Copyright (c) 2018 Simon Goldschmidt
+ */
+
+/{
+	aliases {
+		spi0 = "/soc/spi@ff705000";
+		udc0 = &usb1;
+	};
+
+	soc {
+		u-boot,dm-pre-reloc;
+	};
+};
+
+&watchdog0 {
+	status = "disabled";
+};
+
+&mmc {
+	u-boot,dm-pre-reloc;
+};
+
+&qspi {
+	u-boot,dm-pre-reloc;
+};
+
+&flash {
+	compatible = "n25q00", "spi-flash";
+	u-boot,dm-pre-reloc;
+};
+
+&uart0 {
+	clock-frequency = <100000000>;
+	u-boot,dm-pre-reloc;
+};
+
+&uart1 {
+	clock-frequency = <100000000>;
+};
+
+&porta {
+	bank-name = "porta";
+};
+
+&portb {
+	bank-name = "portb";
+};
+
+&portc {
+	bank-name = "portc";
+};
diff --git a/arch/arm/dts/socfpga_cyclone5_sockit.dts b/arch/arm/dts/socfpga_cyclone5_sockit.dts
index c7a6cf2..c155ff0 100644
--- a/arch/arm/dts/socfpga_cyclone5_sockit.dts
+++ b/arch/arm/dts/socfpga_cyclone5_sockit.dts
@@ -1,32 +1,121 @@
 // SPDX-License-Identifier: GPL-2.0+
 /*
- *  Copyright (C) 2014 Steffen Trumtrar <s.trumtrar@pengutronix.de>
+ * Copyright (C) 2013 Steffen Trumtrar <s.trumtrar@pengutronix.de>
  */
 
 #include "socfpga_cyclone5.dtsi"
 
 / {
 	model = "Terasic SoCkit";
-	compatible = "altr,socfpga-cyclone5", "altr,socfpga";
+	compatible = "terasic,socfpga-cyclone5-sockit", "altr,socfpga-cyclone5", "altr,socfpga";
 
 	chosen {
-		bootargs = "console=ttyS0,115200";
+		bootargs = "earlyprintk";
 		stdout-path = "serial0:115200n8";
 	};
 
+	memory@0 {
+		name = "memory";
+		device_type = "memory";
+		reg = <0x0 0x40000000>; /* 1GB */
+	};
+
 	aliases {
+		/* this allow the ethaddr uboot environmnet variable contents
+		 * to be added to the gmac1 device tree blob.
+		 */
 		ethernet0 = &gmac1;
-		udc0 = &usb1;
 	};
 
-	memory {
-		name = "memory";
-		device_type = "memory";
-		reg = <0x0 0x40000000>; /* 1GB */
+	leds {
+		compatible = "gpio-leds";
+
+		hps_led0 {
+			label = "hps:blue:led0";
+			gpios = <&portb 24 0>;	/* HPS_GPIO53 */
+			linux,default-trigger = "heartbeat";
+		};
+
+		hps_led1 {
+			label = "hps:blue:led1";
+			gpios = <&portb 25 0>;	/* HPS_GPIO54 */
+			linux,default-trigger = "heartbeat";
+		};
+
+		hps_led2 {
+			label = "hps:blue:led2";
+			gpios = <&portb 26 0>;	/* HPS_GPIO55 */
+			linux,default-trigger = "heartbeat";
+		};
+
+		hps_led3 {
+			label = "hps:blue:led3";
+			gpios = <&portb 27 0>;	/* HPS_GPIO56 */
+			linux,default-trigger = "heartbeat";
+		};
+	};
+
+	gpio-keys {
+		compatible = "gpio-keys";
+
+		hps_sw0 {
+			label = "hps_sw0";
+			gpios = <&portc 20 0>;	/* HPS_GPI7 */
+			linux,input-type = <5>;	/* EV_SW */
+			linux,code = <0x0>;	/* SW_LID */
+		};
+
+		hps_sw1 {
+			label = "hps_sw1";
+			gpios = <&portc 19 0>;	/* HPS_GPI6 */
+			linux,input-type = <5>;	/* EV_SW */
+			linux,code = <0x5>;	/* SW_DOCK */
+		};
+
+		hps_sw2 {
+			label = "hps_sw2";
+			gpios = <&portc 18 0>;	/* HPS_GPI5 */
+			linux,input-type = <5>;	/* EV_SW */
+			linux,code = <0xa>;	/* SW_KEYPAD_SLIDE */
+		};
+
+		hps_sw3 {
+			label = "hps_sw3";
+			gpios = <&portc 17 0>;	/* HPS_GPI4 */
+			linux,input-type = <5>;	/* EV_SW */
+			linux,code = <0xc>;	/* SW_ROTATE_LOCK */
+		};
+
+		hps_hkey0 {
+			label = "hps_hkey0";
+			gpios = <&portc 21 1>;	/* HPS_GPI8 */
+			linux,code = <187>;	/* KEY_F17 */
+		};
+
+		hps_hkey1 {
+			label = "hps_hkey1";
+			gpios = <&portc 22 1>;	/* HPS_GPI9 */
+			linux,code = <188>;	/* KEY_F18 */
+		};
+
+		hps_hkey2 {
+			label = "hps_hkey2";
+			gpios = <&portc 23 1>;	/* HPS_GPI10 */
+			linux,code = <189>;	/* KEY_F19 */
+		};
+
+		hps_hkey3 {
+			label = "hps_hkey3";
+			gpios = <&portc 24 1>;	/* HPS_GPI11 */
+			linux,code = <190>;	/* KEY_F20 */
+		};
 	};
 
-	soc {
-		u-boot,dm-pre-reloc;
+	regulator_3_3v: vcc3p3-regulator {
+		compatible = "regulator-fixed";
+		regulator-name = "VCC3P3";
+		regulator-min-microvolt = <3300000>;
+		regulator-max-microvolt = <3300000>;
 	};
 };
 
@@ -44,46 +133,50 @@
 	rxc-skew-ps = <2000>;
 };
 
-&gpio0 {
+&gpio0 {	/* GPIO 0..29 */
 	status = "okay";
 };
 
-&gpio1 {
+&gpio1 {	/* GPIO 30..57 */
 	status = "okay";
 };
 
-&gpio2 {
+&gpio2 {	/* GPIO 58..66 (HLGPI 0..13 at offset 13) */
 	status = "okay";
 };
 
-&i2c0 {
+&i2c1 {
 	status = "okay";
 
+	accel1: accelerometer@53 {
+		compatible = "adi,adxl345";
+		reg = <0x53>;
+
-	rtc: rtc@68 {
-		compatible = "stm,m41t82";
-		reg = <0x68>;
+		interrupt-parent = <&portc>;
+		interrupts = <3 2>;
 	};
 };
 
 &mmc0 {
+	vmmc-supply = <&regulator_3_3v>;
+	vqmmc-supply = <&regulator_3_3v>;
 	status = "okay";
-	u-boot,dm-pre-reloc;
 };
 
 &qspi {
 	status = "okay";
-	u-boot,dm-pre-reloc;
 
-	flash0: n25q00@0 {
-		u-boot,dm-pre-reloc;
+	flash: flash@0 {
 		#address-cells = <1>;
 		#size-cells = <1>;
-		compatible = "n25q00", "spi-flash";
-		reg = <0>;      /* chip select */
-		spi-max-frequency = <50000000>;
+		compatible = "n25q00";
+		reg = <0>;
+		spi-max-frequency = <100000000>;
+
 		m25p,fast-read;
-		page-size = <256>;
-		block-size = <16>; /* 2^16, 64KB */
+		cdns,page-size = <256>;
+		cdns,block-size = <16>;
+		cdns,read-delay = <4>;
 		cdns,tshsl-ns = <50>;
 		cdns,tsd2d-ns = <50>;
 		cdns,tchsh-ns = <4>;
@@ -94,7 +187,3 @@
 &usb1 {
 	status = "okay";
 };
-
-&uart0 {
-	u-boot,dm-pre-reloc;
-};
diff --git a/arch/arm/dts/socfpga_cyclone5_socrates-u-boot.dtsi b/arch/arm/dts/socfpga_cyclone5_socrates-u-boot.dtsi
new file mode 100644
index 0000000..31bd1db
--- /dev/null
+++ b/arch/arm/dts/socfpga_cyclone5_socrates-u-boot.dtsi
@@ -0,0 +1,60 @@
+// SPDX-License-Identifier: GPL-2.0+
+/*
+ * U-Boot additions
+ *
+ * Copyright (C) 2014 Steffen Trumtrar <s.trumtrar@pengutronix.de>
+ * Copyright (c) 2018 Simon Goldschmidt
+ */
+
+/{
+	aliases {
+		spi0 = "/soc/spi@ff705000";
+		udc0 = &usb1;
+	};
+
+	soc {
+		u-boot,dm-pre-reloc;
+	};
+};
+
+&watchdog0 {
+	status = "disabled";
+};
+
+&mmc {
+	u-boot,dm-pre-reloc;
+};
+
+&qspi {
+	u-boot,dm-pre-reloc;
+};
+
+&flash {
+	compatible = "n25q256a", "spi-flash";
+	u-boot,dm-pre-reloc;
+};
+
+&uart0 {
+	clock-frequency = <100000000>;
+	u-boot,dm-pre-reloc;
+};
+
+&uart1 {
+	clock-frequency = <100000000>;
+};
+
+&usb1 {
+	status = "okay";
+};
+
+&porta {
+	bank-name = "porta";
+};
+
+&portb {
+	bank-name = "portb";
+};
+
+&portc {
+	bank-name = "portc";
+};
diff --git a/arch/arm/dts/socfpga_cyclone5_socrates.dts b/arch/arm/dts/socfpga_cyclone5_socrates.dts
index 8cde990..8d5d399 100644
--- a/arch/arm/dts/socfpga_cyclone5_socrates.dts
+++ b/arch/arm/dts/socfpga_cyclone5_socrates.dts
@@ -1,6 +1,6 @@
 // SPDX-License-Identifier: GPL-2.0+
 /*
- *  Copyright (C) 2014 Steffen Trumtrar <s.trumtrar@pengutronix.de>
+ * Copyright (C) 2014 Steffen Trumtrar <s.trumtrar@pengutronix.de>
  */
 
 #include "socfpga_cyclone5.dtsi"
@@ -9,83 +9,86 @@
 	model = "EBV SOCrates";
 	compatible = "ebv,socrates", "altr,socfpga-cyclone5", "altr,socfpga";
 
-	chosen {
-		bootargs = "console=ttyS0,115200";
-		stdout-path = "serial0:115200n8";
-	};
-
 	aliases {
-		/*
-		 * This allows the ethaddr uboot environment variable
-		 * contents to be added to the gmac1 device tree blob.
-		 */
 		ethernet0 = &gmac1;
-		udc0 = &usb1;
+	};
+
+	chosen {
+		bootargs = "earlyprintk";
+		stdout-path = "serial0:115200n8";
 	};
 
-	memory {
+	memory@0 {
 		name = "memory";
 		device_type = "memory";
 		reg = <0x0 0x40000000>; /* 1GB */
 	};
 
-	soc {
-		u-boot,dm-pre-reloc;
+	leds: gpio-leds {
 	};
 };
 
 &gmac1 {
-	status = "okay";
 	phy-mode = "rgmii";
+	status = "okay";
+};
+
+&gpio0 {
+	status = "okay";
+};
 
-	rxd0-skew-ps = <0>;
-	rxd1-skew-ps = <0>;
-	rxd2-skew-ps = <0>;
-	rxd3-skew-ps = <0>;
-	txen-skew-ps = <0>;
-	txc-skew-ps = <2600>;
-	rxdv-skew-ps = <0>;
-	rxc-skew-ps = <2000>;
+&gpio1 {
+	status = "okay";
 };
 
 &i2c0 {
 	status = "okay";
 
 	rtc: rtc@68 {
-		compatible = "stm,m41t82";
+		compatible = "st,m41t82";
 		reg = <0x68>;
 	};
 };
 
+&leds {
+	compatible = "gpio-leds";
+
+	led0 {
+		label = "led:green:heartbeat";
+		gpios = <&porta 28 1>;
+		linux,default-trigger = "heartbeat";
+	};
+
+	led1 {
+		label = "led:green:D7";
+		gpios = <&portb 19 1>;
+	};
+
+	led2 {
+		label = "led:green:D8";
+		gpios = <&portb 25 1>;
+	};
+};
+
-&mmc0 {
+&mmc {
 	status = "okay";
-	u-boot,dm-pre-reloc;
 };
 
 &qspi {
 	status = "okay";
 
-	flash0: n25q00@0 {
+	flash: flash@0 {
 		#address-cells = <1>;
 		#size-cells = <1>;
-		compatible = "n25q00", "spi-flash";
-		reg = <0>;      /* chip select */
-		spi-max-frequency = <50000000>;
+		compatible = "n25q256a";
+		reg = <0>;
+		spi-max-frequency = <100000000>;
 		m25p,fast-read;
-		page-size = <256>;
-		block-size = <16>; /* 2^16, 64KB */
+		cdns,read-delay = <4>;
 		cdns,tshsl-ns = <50>;
 		cdns,tsd2d-ns = <50>;
 		cdns,tchsh-ns = <4>;
 		cdns,tslch-ns = <4>;
+		status = "okay";
 	};
 };
-
-&usb1 {
-	disable-over-current;
-	status = "okay";
-};
-
-&uart0 {
-	u-boot,dm-pre-reloc;
-};
diff --git a/arch/arm/dts/socfpga_cyclone5_sr1500.dts b/arch/arm/dts/socfpga_cyclone5_sr1500.dts
index 86c61fe..6a6c29b 100644
--- a/arch/arm/dts/socfpga_cyclone5_sr1500.dts
+++ b/arch/arm/dts/socfpga_cyclone5_sr1500.dts
@@ -50,6 +50,18 @@
 	status = "okay";
 };
 
+&porta {
+	bank-name = "porta";
+};
+
+&portb {
+	bank-name = "portb";
+};
+
+&portc {
+	bank-name = "portc";
+};
+
 &i2c0 {
 	status = "okay";
 	speed-mode = <0>;
diff --git a/arch/arm/dts/socfpga_cyclone5_vining_fpga-u-boot.dtsi b/arch/arm/dts/socfpga_cyclone5_vining_fpga-u-boot.dtsi
new file mode 100644
index 0000000..360b946
--- /dev/null
+++ b/arch/arm/dts/socfpga_cyclone5_vining_fpga-u-boot.dtsi
@@ -0,0 +1,60 @@
+// SPDX-License-Identifier: (GPL-2.0+ OR X11)
+/*
+ * U-Boot additions
+ *
+ * Copyright (C) 2015 Marek Vasut <marex@denx.de>
+ * Copyright (c) 2018 Simon Goldschmidt
+ */
+
+/{
+	aliases {
+		spi0 = "/soc/spi@ff705000";
+		udc0 = &usb0;
+	};
+
+	soc {
+		u-boot,dm-pre-reloc;
+	};
+};
+
+&watchdog0 {
+	status = "disabled";
+};
+
+&mmc {
+	u-boot,dm-pre-reloc;
+};
+
+&qspi {
+	u-boot,dm-pre-reloc;
+
+	n25q128@0 {
+		compatible = "n25q128", "spi-flash";
+		u-boot,dm-pre-reloc;
+	};
+	n25q00@1 {
+		compatible = "n25q00", "spi-flash";
+		u-boot,dm-pre-reloc;
+	};
+};
+
+&uart0 {
+	clock-frequency = <100000000>;
+	u-boot,dm-pre-reloc;
+};
+
+&uart1 {
+	clock-frequency = <100000000>;
+};
+
+&porta {
+	bank-name = "porta";
+};
+
+&portb {
+	bank-name = "portb";
+};
+
+&portc {
+	bank-name = "portc";
+};
diff --git a/arch/arm/dts/socfpga_cyclone5_vining_fpga.dts b/arch/arm/dts/socfpga_cyclone5_vining_fpga.dts
index 85ab563..355b3db 100644
--- a/arch/arm/dts/socfpga_cyclone5_vining_fpga.dts
+++ b/arch/arm/dts/socfpga_cyclone5_vining_fpga.dts
@@ -1,100 +1,238 @@
-// SPDX-License-Identifier: GPL-2.0+
+// SPDX-License-Identifier: (GPL-2.0+ OR X11)
 /*
  * Copyright (C) 2015 Marek Vasut <marex@denx.de>
  */
 
 #include "socfpga_cyclone5.dtsi"
+#include <dt-bindings/gpio/gpio.h>
+#include <dt-bindings/input/input.h>
 
 / {
 	model = "samtec VIN|ING FPGA";
-	compatible = "altr,socfpga-cyclone5", "altr,socfpga";
+	compatible = "samtec,vining", "altr,socfpga-cyclone5", "altr,socfpga";
 
 	chosen {
-		bootargs = "console=ttyS0,115200";
+		bootargs = "earlyprintk";
 		stdout-path = "serial0:115200n8";
 	};
 
+	memory@0 {
+		name = "memory";
+		device_type = "memory";
+		reg = <0x0 0x40000000>; /* 1GB */
+	};
+
 	aliases {
+		/*
+		 * This allow the ethaddr uboot environment variable contents
+		 * to be added to the gmac1 device tree blob.
+		 */
 		ethernet0 = &gmac1;
-		udc0 = &usb0;
+		ethernet1 = &gmac0;
 	};
 
-	memory {
-		name = "memory";
-		device_type = "memory";
-		reg = <0x0 0x40000000>; /* 1GB */
+	gpio-keys {
+		compatible = "gpio-keys";
+
+		hps_temp0 {
+			label = "BTN_0";			/* TEMP_OS */
+			gpios = <&portc 18 GPIO_ACTIVE_LOW>;	/* HPS_GPIO60 */
+			linux,code = <BTN_0>;
+		};
+
+		hps_hkey0 {
+			label = "BTN_1";			/* DIS_PWR */
+			gpios = <&portc 19 GPIO_ACTIVE_LOW>;	/* HPS_GPIO61 */
+			linux,code = <BTN_1>;
+		};
+
+		hps_hkey1 {
+			label = "hps_hkey1";			/* POWER_DOWN */
+			gpios = <&portc 20 GPIO_ACTIVE_LOW>;	/* HPS_GPIO62 */
+			linux,code = <KEY_POWER>;
+		};
 	};
 
-	soc {
-		u-boot,dm-pre-reloc;
+	regulator-usb-nrst {
+		compatible = "regulator-fixed";
+		regulator-name = "usb_nrst";
+		regulator-min-microvolt = <5000000>;
+		regulator-max-microvolt = <5000000>;
+		gpio = <&portb 5 GPIO_ACTIVE_HIGH>;
+		startup-delay-us = <70000>;
+		enable-active-high;
+		regulator-always-on;
 	};
 };
 
 &gmac1 {
 	status = "okay";
 	phy-mode = "rgmii";
+	phy-handle = <&phy1>;
 
-	rxd0-skew-ps = <0>;
-	rxd1-skew-ps = <0>;
-	rxd2-skew-ps = <0>;
-	rxd3-skew-ps = <0>;
-	txen-skew-ps = <0>;
-	txc-skew-ps = <2600>;
-	rxdv-skew-ps = <0>;
-	rxc-skew-ps = <2000>;
+	snps,reset-gpio = <&porta 0 GPIO_ACTIVE_LOW>;
+	snps,reset-active-low;
+	snps,reset-delays-us = <10000 10000 10000>;
+
+	mdio0 {
+		#address-cells = <1>;
+		#size-cells = <0>;
+		compatible = "snps,dwmac-mdio";
+		phy1: ethernet-phy@1 {
+			reg = <1>;
+			rxd0-skew-ps = <0>;
+			rxd1-skew-ps = <0>;
+			rxd2-skew-ps = <0>;
+			rxd3-skew-ps = <0>;
+			txen-skew-ps = <0>;
+			txc-skew-ps = <2600>;
+			rxdv-skew-ps = <0>;
+			rxc-skew-ps = <2000>;
+		};
+	};
 };
 
-&gpio0 {
+&gpio0 {	/* GPIO 0..29 */
 	status = "okay";
 };
 
-&gpio1 {
+&gpio1 {	/* GPIO 30..57 */
 	status = "okay";
 };
 
-&gpio2 {
+&gpio2 {	/* GPIO 58..66 (HLGPI 0..13 at offset 13) */
 	status = "okay";
 };
 
 &i2c0 {
 	status = "okay";
+
+	gpio: pca9557@1f {
+		compatible = "nxp,pca9557";
+		reg = <0x1f>;
+		gpio-controller;
+		#gpio-cells = <2>;
+	};
+
+	temp: lm75@48 {
+		compatible = "lm75";
+		reg = <0x48>;
+	};
+
+	at24@50 {
+		compatible = "atmel,24c01";
+		pagesize = <8>;
+		reg = <0x50>;
+	};
+
+	i2cswitch@70 {
+		compatible = "nxp,pca9548";
+		#address-cells = <1>;
+		#size-cells = <0>;
+		reg = <0x70>;
+
+		i2c@0 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			reg = <0>;
+		};
+
+		i2c@1 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			reg = <1>;
+		};
+
+		i2c@2 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			reg = <2>;
+		};
+
+		i2c@3 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			reg = <3>;
+		};
+
+		i2c@4 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			reg = <4>;
+		};
+
+		i2c@5 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			reg = <5>;
+		};
+
+		i2c@6 {	/* Backplane EEPROM */
+			#address-cells = <1>;
+			#size-cells = <0>;
+			reg = <6>;
+			eeprom@51 {
+				compatible = "atmel,24c01";
+				pagesize = <8>;
+				reg = <0x51>;
+			};
+		};
+
+		i2c@7 {	/* Power board EEPROM */
+			#address-cells = <1>;
+			#size-cells = <0>;
+			reg = <7>;
+			eeprom@51 {
+				compatible = "atmel,24c01";
+				pagesize = <8>;
+				reg = <0x51>;
+			};
+		};
+	};
+};
+
+&i2c1 {
+	status = "okay";
+	clock-frequency = <100000>;
 
-	rtc: rtc@68 {
-		compatible = "stm,m41t82";
-		reg = <0x68>;
+	at24@50 {
+		compatible = "atmel,24c02";
+		pagesize = <8>;
+		reg = <0x50>;
 	};
 };
 
 &qspi {
 	status = "okay";
-	u-boot,dm-pre-reloc;
 
-	flash0: n25q128@0 {
-		u-boot,dm-pre-reloc;
+	n25q128@0 {
 		#address-cells = <1>;
 		#size-cells = <1>;
-		compatible = "n25q128", "spi-flash";
-		reg = <0>;      /* chip select */
-		spi-max-frequency = <50000000>;
+		compatible = "n25q128";
+		reg = <0>;		/* chip select */
+		spi-max-frequency = <100000000>;
 		m25p,fast-read;
-		page-size = <256>;
-		block-size = <16>; /* 2^16, 64KB */
+
+		cdns,page-size = <256>;
+		cdns,block-size = <16>;
+		cdns,read-delay = <4>;
 		cdns,tshsl-ns = <50>;
 		cdns,tsd2d-ns = <50>;
 		cdns,tchsh-ns = <4>;
 		cdns,tslch-ns = <4>;
 	};
 
-	flash1: n25q00@1 {
-		u-boot,dm-pre-reloc;
+	n25q00@1 {
 		#address-cells = <1>;
 		#size-cells = <1>;
-		compatible = "n25q00", "spi-flash";
-		reg = <1>;      /* chip select */
-		spi-max-frequency = <50000000>;
+		compatible = "n25q00";
+		reg = <1>;		/* chip select */
+		spi-max-frequency = <100000000>;
 		m25p,fast-read;
-		page-size = <256>;
-		block-size = <16>; /* 2^16, 64KB */
+
+		cdns,page-size = <256>;
+		cdns,block-size = <16>;
+		cdns,read-delay = <4>;
 		cdns,tshsl-ns = <50>;
 		cdns,tsd2d-ns = <50>;
 		cdns,tchsh-ns = <4>;
@@ -103,13 +241,11 @@
 };
 
 &usb0 {
+	dr_mode = "host";
 	status = "okay";
 };
 
 &usb1 {
+	dr_mode = "peripheral";
 	status = "okay";
 };
-
-&uart0 {
-	u-boot,dm-pre-reloc;
-};