rockchip: rk3399-puma: add code to allow forcing a power-on reset
The reset circuitry in the RK3399 only resets 'almost all logic' when
a software reset is performed. To make our software maintenance
easier in the future, we want to have the option (controlled by a DTS
property) to force all reset causes other than a power-on reset to
trigger a power-on reset via a GPIO trigger.
This adds the necessary support to the rk3399-puma (i.e. RK3399-Q7)
board-support and the documentation for the new property
(sysreset-gpio) within the /config-node.
Signed-off-by: Philipp Tomsich <philipp.tomsich@theobroma-systems.com>
Tested-by: Klaus Goger <klaus.goger@theobroma-systems.com>
Reviewed-by: Simon Glass <sjg@chromium.org>
diff --git a/board/theobroma-systems/puma_rk3399/puma-rk3399.c b/board/theobroma-systems/puma_rk3399/puma-rk3399.c
index 7f2dd65..0ad267c 100644
--- a/board/theobroma-systems/puma_rk3399/puma-rk3399.c
+++ b/board/theobroma-systems/puma_rk3399/puma-rk3399.c
@@ -11,7 +11,10 @@
#include <usb.h>
#include <dm/pinctrl.h>
#include <dm/uclass-internal.h>
+#include <asm/gpio.h>
#include <asm/setup.h>
+#include <asm/arch/clock.h>
+#include <asm/arch/cru_rk3399.h>
#include <asm/arch/periph.h>
#include <power/regulator.h>
#include <u-boot/sha256.h>
@@ -33,9 +36,50 @@
return 0;
}
+static void rk3399_force_power_on_reset(void)
+{
+ ofnode node;
+ struct gpio_desc sysreset_gpio;
+
+ debug("%s: trying to force a power-on reset\n", __func__);
+
+ node = ofnode_path("/config");
+ if (!ofnode_valid(node)) {
+ debug("%s: no /config node?\n", __func__);
+ return;
+ }
+
+ if (gpio_request_by_name_nodev(node, "sysreset-gpio", 0,
+ &sysreset_gpio, GPIOD_IS_OUT)) {
+ debug("%s: could not find a /config/sysreset-gpio\n", __func__);
+ return;
+ }
+
+ dm_gpio_set_value(&sysreset_gpio, 1);
+}
+
void spl_board_init(void)
{
int ret;
+ struct rk3399_cru *cru = rockchip_get_cru();
+
+ /*
+ * The RK3399 resets only 'almost all logic' (see also in the TRM
+ * "3.9.4 Global software reset"), when issuing a software reset.
+ * This may cause issues during boot-up for some configurations of
+ * the application software stack.
+ *
+ * To work around this, we test whether the last reset reason was
+ * a power-on reset and (if not) issue an overtemp-reset to reset
+ * the entire module.
+ *
+ * While this was previously fixed by modifying the various places
+ * that could generate a software reset (e.g. U-Boot's sysreset
+ * driver, the ATF or Linux), we now have it here to ensure that
+ * we no longer have to track this through the various components.
+ */
+ if (cru->glb_rst_st != 0)
+ rk3399_force_power_on_reset();
/*
* Turning the eMMC and SPI back on (if disabled via the Qseven