diff --git a/drivers/mtd/spi/Kconfig b/drivers/mtd/spi/Kconfig
index 4ba95d5..e3b40fc 100644
--- a/drivers/mtd/spi/Kconfig
+++ b/drivers/mtd/spi/Kconfig
@@ -27,6 +27,8 @@
 
 config SPI_FLASH
 	bool "Legacy SPI Flash Interface support"
+	depends on SPI
+	select SPI_MEM
 	help
 	  Enable the legacy SPI flash support. This will include basic
 	  standard support for things like probing, read / write, and
diff --git a/drivers/mtd/spi/Makefile b/drivers/mtd/spi/Makefile
index b4c7e1c..70058d3 100644
--- a/drivers/mtd/spi/Makefile
+++ b/drivers/mtd/spi/Makefile
@@ -9,7 +9,7 @@
 obj-$(CONFIG_SPL_SPI_BOOT)	+= fsl_espi_spl.o
 endif
 
-obj-$(CONFIG_SPI_FLASH) += sf_probe.o spi_flash.o spi_flash_ids.o sf.o
-obj-$(CONFIG_SPI_FLASH_DATAFLASH) += sf_dataflash.o
+obj-$(CONFIG_SPI_FLASH) += sf_probe.o spi-nor-core.o
+obj-$(CONFIG_SPI_FLASH_DATAFLASH) += sf_dataflash.o sf.o
 obj-$(CONFIG_SPI_FLASH_MTD) += sf_mtd.o
 obj-$(CONFIG_SPI_FLASH_SANDBOX) += sandbox.o
diff --git a/drivers/mtd/spi/sandbox.c b/drivers/mtd/spi/sandbox.c
index 7b9891c..084c66e 100644
--- a/drivers/mtd/spi/sandbox.c
+++ b/drivers/mtd/spi/sandbox.c
@@ -92,7 +92,7 @@
 	/* The current flash status (see STAT_XXX defines above) */
 	u16 status;
 	/* Data describing the flash we're emulating */
-	const struct spi_flash_info *data;
+	const struct flash_info *data;
 	/* The file on disk to serv up data from */
 	int fd;
 };
@@ -122,7 +122,7 @@
 	/* spec = idcode:file */
 	struct sandbox_spi_flash *sbsf = dev_get_priv(dev);
 	size_t len, idname_len;
-	const struct spi_flash_info *data;
+	const struct flash_info *data;
 	struct sandbox_spi_flash_plat_data *pdata = dev_get_platdata(dev);
 	struct sandbox_state *state = state_get_current();
 	struct dm_spi_slave_platdata *slave_plat;
@@ -155,7 +155,7 @@
 	idname_len = strlen(spec);
 	debug("%s: device='%s'\n", __func__, spec);
 
-	for (data = spi_flash_ids; data->name; data++) {
+	for (data = spi_nor_ids; data->name; data++) {
 		len = strlen(data->name);
 		if (idname_len != len)
 			continue;
@@ -243,43 +243,43 @@
 
 	sbsf->cmd = rx[0];
 	switch (sbsf->cmd) {
-	case CMD_READ_ID:
+	case SPINOR_OP_RDID:
 		sbsf->state = SF_ID;
 		sbsf->cmd = SF_ID;
 		break;
-	case CMD_READ_ARRAY_FAST:
+	case SPINOR_OP_READ_FAST:
 		sbsf->pad_addr_bytes = 1;
-	case CMD_READ_ARRAY_SLOW:
-	case CMD_PAGE_PROGRAM:
+	case SPINOR_OP_READ:
+	case SPINOR_OP_PP:
 		sbsf->state = SF_ADDR;
 		break;
-	case CMD_WRITE_DISABLE:
+	case SPINOR_OP_WRDI:
 		debug(" write disabled\n");
 		sbsf->status &= ~STAT_WEL;
 		break;
-	case CMD_READ_STATUS:
+	case SPINOR_OP_RDSR:
 		sbsf->state = SF_READ_STATUS;
 		break;
-	case CMD_READ_STATUS1:
+	case SPINOR_OP_RDSR2:
 		sbsf->state = SF_READ_STATUS1;
 		break;
-	case CMD_WRITE_ENABLE:
+	case SPINOR_OP_WREN:
 		debug(" write enabled\n");
 		sbsf->status |= STAT_WEL;
 		break;
-	case CMD_WRITE_STATUS:
+	case SPINOR_OP_WRSR:
 		sbsf->state = SF_WRITE_STATUS;
 		break;
 	default: {
 		int flags = sbsf->data->flags;
 
 		/* we only support erase here */
-		if (sbsf->cmd == CMD_ERASE_CHIP) {
+		if (sbsf->cmd == SPINOR_OP_CHIP_ERASE) {
 			sbsf->erase_size = sbsf->data->sector_size *
 				sbsf->data->n_sectors;
-		} else if (sbsf->cmd == CMD_ERASE_4K && (flags & SECT_4K)) {
+		} else if (sbsf->cmd == SPINOR_OP_BE_4K && (flags & SECT_4K)) {
 			sbsf->erase_size = 4 << 10;
-		} else if (sbsf->cmd == CMD_ERASE_64K && !(flags & SECT_4K)) {
+		} else if (sbsf->cmd == SPINOR_OP_SE && !(flags & SECT_4K)) {
 			sbsf->erase_size = 64 << 10;
 		} else {
 			debug(" cmd unknown: %#x\n", sbsf->cmd);
@@ -380,11 +380,11 @@
 				return -EIO;
 			}
 			switch (sbsf->cmd) {
-			case CMD_READ_ARRAY_FAST:
-			case CMD_READ_ARRAY_SLOW:
+			case SPINOR_OP_READ_FAST:
+			case SPINOR_OP_READ:
 				sbsf->state = SF_READ;
 				break;
-			case CMD_PAGE_PROGRAM:
+			case SPINOR_OP_PP:
 				sbsf->state = SF_WRITE;
 				break;
 			default:
diff --git a/drivers/mtd/spi/sf_dataflash.c b/drivers/mtd/spi/sf_dataflash.c
index 4a60c1b..b6a2631 100644
--- a/drivers/mtd/spi/sf_dataflash.c
+++ b/drivers/mtd/spi/sf_dataflash.c
@@ -18,6 +18,7 @@
 
 #include "sf_internal.h"
 
+#define CMD_READ_ID		0x9f
 /* reads can bypass the buffers */
 #define OP_READ_CONTINUOUS	0xE8
 #define OP_READ_PAGE		0xD2
@@ -441,7 +442,7 @@
 	return 0;
 }
 
-struct flash_info {
+struct data_flash_info {
 	char		*name;
 
 	/*
@@ -460,7 +461,7 @@
 #define IS_POW2PS	0x0001		/* uses 2^N byte pages */
 };
 
-static struct flash_info dataflash_data[] = {
+static struct data_flash_info dataflash_data[] = {
 	/*
 	 * NOTE:  chips with SUP_POW2PS (rev D and up) need two entries,
 	 * one with IS_POW2PS and the other without.  The entry with the
@@ -501,12 +502,12 @@
 	{ "at45db642d",  0x1f2800, 8192, 1024, 10, SUP_POW2PS | IS_POW2PS},
 };
 
-static struct flash_info *jedec_probe(struct spi_slave *spi)
+static struct data_flash_info *jedec_probe(struct spi_slave *spi)
 {
 	int			tmp;
 	uint8_t			id[5];
 	uint32_t		jedec;
-	struct flash_info	*info;
+	struct data_flash_info	*info;
 	int status;
 
 	/*
@@ -583,7 +584,7 @@
 {
 	struct spi_slave *spi = dev_get_parent_priv(dev);
 	struct spi_flash *spi_flash;
-	struct flash_info *info;
+	struct data_flash_info *info;
 	int status;
 
 	spi_flash = dev_get_uclass_priv(dev);
diff --git a/drivers/mtd/spi/sf_internal.h b/drivers/mtd/spi/sf_internal.h
index 46a5044..fd00e0d 100644
--- a/drivers/mtd/spi/sf_internal.h
+++ b/drivers/mtd/spi/sf_internal.h
@@ -12,142 +12,63 @@
 #include <linux/types.h>
 #include <linux/compiler.h>
 
-/* Dual SPI flash memories - see SPI_COMM_DUAL_... */
-enum spi_dual_flash {
-	SF_SINGLE_FLASH	= 0,
-	SF_DUAL_STACKED_FLASH	= BIT(0),
-	SF_DUAL_PARALLEL_FLASH	= BIT(1),
-};
-
-enum spi_nor_option_flags {
-	SNOR_F_SST_WR		= BIT(0),
-	SNOR_F_USE_FSR		= BIT(1),
-	SNOR_F_USE_UPAGE	= BIT(3),
-};
-
-#define SPI_FLASH_3B_ADDR_LEN		3
-#define SPI_FLASH_CMD_LEN		(1 + SPI_FLASH_3B_ADDR_LEN)
-#define SPI_FLASH_16MB_BOUN		0x1000000
-
-/* CFI Manufacture ID's */
-#define SPI_FLASH_CFI_MFR_SPANSION	0x01
-#define SPI_FLASH_CFI_MFR_STMICRO	0x20
-#define SPI_FLASH_CFI_MFR_MICRON	0x2C
-#define SPI_FLASH_CFI_MFR_MACRONIX	0xc2
-#define SPI_FLASH_CFI_MFR_SST		0xbf
-#define SPI_FLASH_CFI_MFR_WINBOND	0xef
-#define SPI_FLASH_CFI_MFR_ATMEL		0x1f
-
-/* Erase commands */
-#define CMD_ERASE_4K			0x20
-#define CMD_ERASE_CHIP			0xc7
-#define CMD_ERASE_64K			0xd8
-
-/* Write commands */
-#define CMD_WRITE_STATUS		0x01
-#define CMD_PAGE_PROGRAM		0x02
-#define CMD_WRITE_DISABLE		0x04
-#define CMD_WRITE_ENABLE		0x06
-#define CMD_QUAD_PAGE_PROGRAM		0x32
-
-/* Read commands */
-#define CMD_READ_ARRAY_SLOW		0x03
-#define CMD_READ_ARRAY_FAST		0x0b
-#define CMD_READ_DUAL_OUTPUT_FAST	0x3b
-#define CMD_READ_DUAL_IO_FAST		0xbb
-#define CMD_READ_QUAD_OUTPUT_FAST	0x6b
-#define CMD_READ_QUAD_IO_FAST		0xeb
-#define CMD_READ_ID			0x9f
-#define CMD_READ_STATUS			0x05
-#define CMD_READ_STATUS1		0x35
-#define CMD_READ_CONFIG			0x35
-#define CMD_FLAG_STATUS			0x70
-
-/* Bank addr access commands */
-#ifdef CONFIG_SPI_FLASH_BAR
-# define CMD_BANKADDR_BRWR		0x17
-# define CMD_BANKADDR_BRRD		0x16
-# define CMD_EXTNADDR_WREAR		0xC5
-# define CMD_EXTNADDR_RDEAR		0xC8
-#endif
-
-/* Common status */
-#define STATUS_WIP			BIT(0)
-#define STATUS_QEB_WINSPAN		BIT(1)
-#define STATUS_QEB_MXIC			BIT(6)
-#define STATUS_PEC			BIT(7)
-#define SR_BP0				BIT(2)  /* Block protect 0 */
-#define SR_BP1				BIT(3)  /* Block protect 1 */
-#define SR_BP2				BIT(4)  /* Block protect 2 */
+#define SPI_NOR_MAX_ID_LEN	6
+#define SPI_NOR_MAX_ADDR_WIDTH	4
 
-/* Flash timeout values */
-#define SPI_FLASH_PROG_TIMEOUT		(2 * CONFIG_SYS_HZ)
-#define SPI_FLASH_PAGE_ERASE_TIMEOUT	(5 * CONFIG_SYS_HZ)
-#define SPI_FLASH_SECTOR_ERASE_TIMEOUT	(10 * CONFIG_SYS_HZ)
-
-/* SST specific */
-#ifdef CONFIG_SPI_FLASH_SST
-#define SST26_CMD_READ_BPR		0x72
-#define SST26_CMD_WRITE_BPR		0x42
-
-#define SST26_BPR_8K_NUM		4
-#define SST26_MAX_BPR_REG_LEN		(18 + 1)
-#define SST26_BOUND_REG_SIZE		((32 + SST26_BPR_8K_NUM * 8) * SZ_1K)
-
-enum lock_ctl {
-	SST26_CTL_LOCK,
-	SST26_CTL_UNLOCK,
-	SST26_CTL_CHECK
-};
-
-# define CMD_SST_BP		0x02    /* Byte Program */
-# define CMD_SST_AAI_WP		0xAD	/* Auto Address Incr Word Program */
-
-int sst_write_wp(struct spi_flash *flash, u32 offset, size_t len,
-		const void *buf);
-int sst_write_bp(struct spi_flash *flash, u32 offset, size_t len,
-		const void *buf);
-#endif
-
-#define JEDEC_MFR(info)		((info)->id[0])
-#define JEDEC_ID(info)		(((info)->id[1]) << 8 | ((info)->id[2]))
-#define JEDEC_EXT(info)		(((info)->id[3]) << 8 | ((info)->id[4]))
-#define SPI_FLASH_MAX_ID_LEN	6
-
-struct spi_flash_info {
-	/* Device name ([MANUFLETTER][DEVTYPE][DENSITY][EXTRAINFO]) */
-	const char	*name;
+struct flash_info {
+	char		*name;
 
 	/*
 	 * This array stores the ID bytes.
 	 * The first three bytes are the JEDIC ID.
 	 * JEDEC ID zero means "no ID" (mostly older chips).
 	 */
-	u8		id[SPI_FLASH_MAX_ID_LEN];
+	u8		id[SPI_NOR_MAX_ID_LEN];
 	u8		id_len;
 
-	/*
-	 * The size listed here is what works with SPINOR_OP_SE, which isn't
+	/* The size listed here is what works with SPINOR_OP_SE, which isn't
 	 * necessarily called a "sector" by the vendor.
 	 */
-	u32		sector_size;
-	u32		n_sectors;
+	unsigned int	sector_size;
+	u16		n_sectors;
 
 	u16		page_size;
+	u16		addr_width;
 
 	u16		flags;
-#define SECT_4K			BIT(0)	/* CMD_ERASE_4K works uniformly */
-#define E_FSR			BIT(1)	/* use flag status register for */
-#define SST_WR			BIT(2)	/* use SST byte/word programming */
-#define WR_QPP			BIT(3)	/* use Quad Page Program */
-#define RD_QUAD			BIT(4)	/* use Quad Read */
-#define RD_DUAL			BIT(5)	/* use Dual Read */
-#define RD_QUADIO		BIT(6)	/* use Quad IO Read */
-#define RD_DUALIO		BIT(7)	/* use Dual IO Read */
-#define RD_FULL			(RD_QUAD | RD_DUAL | RD_QUADIO | RD_DUALIO)
+#define SECT_4K			BIT(0)	/* SPINOR_OP_BE_4K works uniformly */
+#define SPI_NOR_NO_ERASE	BIT(1)	/* No erase command needed */
+#define SST_WRITE		BIT(2)	/* use SST byte programming */
+#define SPI_NOR_NO_FR		BIT(3)	/* Can't do fastread */
+#define SECT_4K_PMC		BIT(4)	/* SPINOR_OP_BE_4K_PMC works uniformly */
+#define SPI_NOR_DUAL_READ	BIT(5)	/* Flash supports Dual Read */
+#define SPI_NOR_QUAD_READ	BIT(6)	/* Flash supports Quad Read */
+#define USE_FSR			BIT(7)	/* use flag status register */
+#define SPI_NOR_HAS_LOCK	BIT(8)	/* Flash supports lock/unlock via SR */
+#define SPI_NOR_HAS_TB		BIT(9)	/*
+					 * Flash SR has Top/Bottom (TB) protect
+					 * bit. Must be used with
+					 * SPI_NOR_HAS_LOCK.
+					 */
+#define	SPI_S3AN		BIT(10)	/*
+					 * Xilinx Spartan 3AN In-System Flash
+					 * (MFR cannot be used for probing
+					 * because it has the same value as
+					 * ATMEL flashes)
+					 */
+#define SPI_NOR_4B_OPCODES	BIT(11)	/*
+					 * Use dedicated 4byte address op codes
+					 * to support memory size above 128Mib.
+					 */
+#define NO_CHIP_ERASE		BIT(12) /* Chip does not support chip erase */
+#define SPI_NOR_SKIP_SFDP	BIT(13)	/* Skip parsing of SFDP tables */
+#define USE_CLSR		BIT(14)	/* use CLSR command */
 };
 
-extern const struct spi_flash_info spi_flash_ids[];
+extern const struct flash_info spi_nor_ids[];
+
+#define JEDEC_MFR(info)	((info)->id[0])
+#define JEDEC_ID(info)		(((info)->id[1]) << 8 | ((info)->id[2]))
 
 /* Send a single-byte command to the device and read the response */
 int spi_flash_cmd(struct spi_slave *spi, u8 cmd, void *response, size_t len);
@@ -166,79 +87,13 @@
 int spi_flash_cmd_write(struct spi_slave *spi, const u8 *cmd, size_t cmd_len,
 		const void *data, size_t data_len);
 
-
-/* Flash erase(sectors) operation, support all possible erase commands */
-int spi_flash_cmd_erase_ops(struct spi_flash *flash, u32 offset, size_t len);
 
 /* Get software write-protect value (BP bits) */
 int spi_flash_cmd_get_sw_write_prot(struct spi_flash *flash);
 
-/* Lock stmicro spi flash region */
-int stm_lock(struct spi_flash *flash, u32 ofs, size_t len);
-
-/* Unlock stmicro spi flash region */
-int stm_unlock(struct spi_flash *flash, u32 ofs, size_t len);
-
-/* Check if a stmicro spi flash region is completely locked */
-int stm_is_locked(struct spi_flash *flash, u32 ofs, size_t len);
-
-/* Enable writing on the SPI flash */
-static inline int spi_flash_cmd_write_enable(struct spi_flash *flash)
-{
-	return spi_flash_cmd(flash->spi, CMD_WRITE_ENABLE, NULL, 0);
-}
-
-/* Disable writing on the SPI flash */
-static inline int spi_flash_cmd_write_disable(struct spi_flash *flash)
-{
-	return spi_flash_cmd(flash->spi, CMD_WRITE_DISABLE, NULL, 0);
-}
-
-/*
- * Used for spi_flash write operation
- * - SPI claim
- * - spi_flash_cmd_write_enable
- * - spi_flash_cmd_write
- * - spi_flash_wait_till_ready
- * - SPI release
- */
-int spi_flash_write_common(struct spi_flash *flash, const u8 *cmd,
-		size_t cmd_len, const void *buf, size_t buf_len);
-
-/*
- * Flash write operation, support all possible write commands.
- * Write the requested data out breaking it up into multiple write
- * commands as needed per the write size.
- */
-int spi_flash_cmd_write_ops(struct spi_flash *flash, u32 offset,
-		size_t len, const void *buf);
-
-/*
- * Same as spi_flash_cmd_read() except it also claims/releases the SPI
- * bus. Used as common part of the ->read() operation.
- */
-int spi_flash_read_common(struct spi_flash *flash, const u8 *cmd,
-		size_t cmd_len, void *data, size_t data_len);
-
-/* Flash read operation, support all possible read commands */
-int spi_flash_cmd_read_ops(struct spi_flash *flash, u32 offset,
-		size_t len, void *data);
 
 #ifdef CONFIG_SPI_FLASH_MTD
 int spi_flash_mtd_register(struct spi_flash *flash);
 void spi_flash_mtd_unregister(void);
 #endif
-
-/**
- * spi_flash_scan - scan the SPI FLASH
- * @flash:	the spi flash structure
- *
- * The drivers can use this fuction to scan the SPI FLASH.
- * In the scanning, it will try to get all the necessary information to
- * fill the spi_flash{}.
- *
- * Return: 0 for success, others for failure.
- */
-int spi_flash_scan(struct spi_flash *flash);
-
 #endif /* _SF_INTERNAL_H_ */
diff --git a/drivers/mtd/spi/sf_probe.c b/drivers/mtd/spi/sf_probe.c
index 7a37991..7f1378f 100644
--- a/drivers/mtd/spi/sf_probe.c
+++ b/drivers/mtd/spi/sf_probe.c
@@ -40,7 +40,7 @@
 		return ret;
 	}
 
-	ret = spi_flash_scan(flash);
+	ret = spi_nor_scan(flash);
 	if (ret)
 		goto err_read_id;
 
@@ -96,32 +96,38 @@
 			      void *buf)
 {
 	struct spi_flash *flash = dev_get_uclass_priv(dev);
+	struct mtd_info *mtd = &flash->mtd;
+	size_t retlen;
 
-	return log_ret(spi_flash_cmd_read_ops(flash, offset, len, buf));
+	return log_ret(mtd->_read(mtd, offset, len, &retlen, buf));
 }
 
 static int spi_flash_std_write(struct udevice *dev, u32 offset, size_t len,
 			       const void *buf)
 {
 	struct spi_flash *flash = dev_get_uclass_priv(dev);
+	struct mtd_info *mtd = &flash->mtd;
+	size_t retlen;
 
-#if defined(CONFIG_SPI_FLASH_SST)
-	if (flash->flags & SNOR_F_SST_WR) {
-		if (flash->spi->mode & SPI_TX_BYTE)
-			return sst_write_bp(flash, offset, len, buf);
-		else
-			return sst_write_wp(flash, offset, len, buf);
-	}
-#endif
-
-	return spi_flash_cmd_write_ops(flash, offset, len, buf);
+	return mtd->_write(mtd, offset, len, &retlen, buf);
 }
 
 static int spi_flash_std_erase(struct udevice *dev, u32 offset, size_t len)
 {
 	struct spi_flash *flash = dev_get_uclass_priv(dev);
+	struct mtd_info *mtd = &flash->mtd;
+	struct erase_info instr;
+
+	if (offset % mtd->erasesize || len % mtd->erasesize) {
+		printf("SF: Erase offset/length not multiple of erase size\n");
+		return -EINVAL;
+	}
+
+	memset(&instr, 0, sizeof(instr));
+	instr.addr = offset;
+	instr.len = len;
 
-	return spi_flash_cmd_erase_ops(flash, offset, len);
+	return mtd->_erase(mtd, &instr);
 }
 
 static int spi_flash_std_get_sw_write_prot(struct udevice *dev)
diff --git a/drivers/mtd/spi/spi-nor-core.c b/drivers/mtd/spi/spi-nor-core.c
index 13c6236..7590ff7 100644
--- a/drivers/mtd/spi/spi-nor-core.c
+++ b/drivers/mtd/spi/spi-nor-core.c
@@ -21,6 +21,8 @@
 #include <spi-mem.h>
 #include <spi.h>
 
+#include "sf_internal.h"
+
 /* Define max times to check status register before we give up. */
 
 /*
@@ -32,63 +34,6 @@
 
 #define DEFAULT_READY_WAIT_JIFFIES		(40UL * HZ)
 
-#define SPI_NOR_MAX_ID_LEN	6
-#define SPI_NOR_MAX_ADDR_WIDTH	4
-
-struct flash_info {
-	char		*name;
-
-	/*
-	 * This array stores the ID bytes.
-	 * The first three bytes are the JEDIC ID.
-	 * JEDEC ID zero means "no ID" (mostly older chips).
-	 */
-	u8		id[SPI_NOR_MAX_ID_LEN];
-	u8		id_len;
-
-	/* The size listed here is what works with SPINOR_OP_SE, which isn't
-	 * necessarily called a "sector" by the vendor.
-	 */
-	unsigned int	sector_size;
-	u16		n_sectors;
-
-	u16		page_size;
-	u16		addr_width;
-
-	u16		flags;
-#define SECT_4K			BIT(0)	/* SPINOR_OP_BE_4K works uniformly */
-#define SPI_NOR_NO_ERASE	BIT(1)	/* No erase command needed */
-#define SST_WRITE		BIT(2)	/* use SST byte programming */
-#define SPI_NOR_NO_FR		BIT(3)	/* Can't do fastread */
-#define SECT_4K_PMC		BIT(4)	/* SPINOR_OP_BE_4K_PMC works uniformly */
-#define SPI_NOR_DUAL_READ	BIT(5)	/* Flash supports Dual Read */
-#define SPI_NOR_QUAD_READ	BIT(6)	/* Flash supports Quad Read */
-#define USE_FSR			BIT(7)	/* use flag status register */
-#define SPI_NOR_HAS_LOCK	BIT(8)	/* Flash supports lock/unlock via SR */
-#define SPI_NOR_HAS_TB		BIT(9)	/*
-					 * Flash SR has Top/Bottom (TB) protect
-					 * bit. Must be used with
-					 * SPI_NOR_HAS_LOCK.
-					 */
-#define	SPI_S3AN		BIT(10)	/*
-					 * Xilinx Spartan 3AN In-System Flash
-					 * (MFR cannot be used for probing
-					 * because it has the same value as
-					 * ATMEL flashes)
-					 */
-#define SPI_NOR_4B_OPCODES	BIT(11)	/*
-					 * Use dedicated 4byte address op codes
-					 * to support memory size above 128Mib.
-					 */
-#define NO_CHIP_ERASE		BIT(12) /* Chip does not support chip erase */
-#define SPI_NOR_SKIP_SFDP	BIT(13)	/* Skip parsing of SFDP tables */
-#define USE_CLSR		BIT(14)	/* use CLSR command */
-
-	int	(*quad_enable)(struct spi_nor *nor);
-};
-
-#define JEDEC_MFR(info)	((info)->id[0])
-
 static int spi_nor_read_write_reg(struct spi_nor *nor, struct spi_mem_op
 		*op, void *buf)
 {