omap: add MMC and FAT support to SPL
- Add MMC raw and FAT mode boot support for OMAP
- Provide a means by which parameters passed by ROM-code
can be saved in u-boot.
- Save boot mode related information passed by OMAP4 ROM-code
and use it to determine where to load the u-boot from
- Assumes that the image has a mkimage header. Gets the
payload size and load address from this header. If the
header is not detected assume u-boot.bin as payload
Signed-off-by: Aneesh V <aneesh@ti.com>
Signed-off-by: Sandeep Paulraj <s-paulraj@ti.com>
diff --git a/arch/arm/cpu/armv7/omap4/lowlevel_init.S b/arch/arm/cpu/armv7/omap4/lowlevel_init.S
index 6abfbba..91525ec 100644
--- a/arch/arm/cpu/armv7/omap4/lowlevel_init.S
+++ b/arch/arm/cpu/armv7/omap4/lowlevel_init.S
@@ -27,6 +27,37 @@
*/
#include <asm/arch/omap4.h>
+#ifdef CONFIG_SPL_BUILD
+.global save_boot_params
+save_boot_params:
+ /*
+ * See if the rom code passed pointer is valid:
+ * It is not valid if it is not in non-secure SRAM
+ * This may happen if you are booting with the help of
+ * debugger
+ */
+ ldr r2, =NON_SECURE_SRAM_START
+ cmp r2, r0
+ bgt 1f
+ ldr r2, =NON_SECURE_SRAM_END
+ cmp r2, r0
+ blt 1f
+
+ /* Store the boot device in omap4_boot_device */
+ ldr r2, [r0, #BOOT_DEVICE_OFFSET] @ r1 <- value of boot device
+ and r2, #BOOT_DEVICE_MASK
+ ldr r3, =omap4_boot_device
+ str r2, [r3] @ omap4_boot_device <- r1
+
+ /* Store the boot mode (raw/FAT) in omap4_boot_mode */
+ ldr r2, [r0, #DEV_DESC_PTR_OFFSET] @ get the device descriptor ptr
+ ldr r2, [r2, #DEV_DATA_PTR_OFFSET] @ get the pDeviceData ptr
+ ldr r2, [r2, #BOOT_MODE_OFFSET] @ get the boot mode
+ ldr r3, =omap4_boot_mode
+ str r2, [r3]
+1:
+ bx lr
+#endif
.globl lowlevel_init
lowlevel_init: