usb: sunxi: Switch to use generic-phy
Allwinner USB PHY handling can be done through driver-model
generic-phy so add the generic-phy ops to relevant places
on host and musb sunxi driver and enable them in respective
SOC's.
Signed-off-by: Jagan Teki <jagan@amarulasolutions.com>
Acked-by: Jun Nie <jun.nie@linaro.org>
diff --git a/drivers/usb/host/ohci-sunxi.c b/drivers/usb/host/ohci-sunxi.c
index af35a30..ce2b47a 100644
--- a/drivers/usb/host/ohci-sunxi.c
+++ b/drivers/usb/host/ohci-sunxi.c
@@ -10,17 +10,15 @@
#include <common.h>
#include <asm/arch/clock.h>
-#include <asm/arch/usb_phy.h>
#include <asm/io.h>
#include <dm.h>
#include <usb.h>
#include "ohci.h"
+#include <generic-phy.h>
#ifdef CONFIG_SUNXI_GEN_SUN4I
-#define BASE_DIST 0x8000
#define AHB_CLK_DIST 2
#else
-#define BASE_DIST 0x1000
#define AHB_CLK_DIST 1
#endif
@@ -29,7 +27,7 @@
ohci_t ohci;
int ahb_gate_mask; /* Mask of ahb_gate0 clk gate bits for this hcd */
int usb_gate_mask; /* Mask of usb_clk_cfg clk gate bits for this hcd */
- int phy_index; /* Index of the usb-phy attached to this hcd */
+ struct phy phy;
};
static int ohci_usb_probe(struct udevice *dev)
@@ -38,11 +36,37 @@
struct ohci_sunxi_priv *priv = dev_get_priv(dev);
struct ohci_regs *regs = (struct ohci_regs *)devfdt_get_addr(dev);
int extra_ahb_gate_mask = 0;
+ int phys, ret;
priv->ccm = (struct sunxi_ccm_reg *)SUNXI_CCM_BASE;
if (IS_ERR(priv->ccm))
return PTR_ERR(priv->ccm);
+ phys = dev_count_phandle_with_args(dev, "phys", "#phy-cells");
+ if (phys < 0) {
+ phys = 0;
+ goto no_phy;
+ }
+
+ ret = generic_phy_get_by_name(dev, "usb", &priv->phy);
+ if (ret) {
+ pr_err("failed to get %s usb PHY\n", dev->name);
+ return ret;
+ }
+
+ ret = generic_phy_init(&priv->phy);
+ if (ret) {
+ pr_err("failed to init %s USB PHY\n", dev->name);
+ return ret;
+ }
+
+ ret = generic_phy_power_on(&priv->phy);
+ if (ret) {
+ pr_err("failed to power on %s USB PHY\n", dev->name);
+ return ret;
+ }
+
+no_phy:
bus_priv->companion = true;
/*
@@ -54,11 +78,9 @@
extra_ahb_gate_mask = 1 << AHB_GATE_OFFSET_USB_EHCI0;
#endif
priv->usb_gate_mask = CCM_USB_CTRL_OHCI0_CLK;
- priv->phy_index = ((uintptr_t)regs - (SUNXI_USB1_BASE + 0x400)) / BASE_DIST;
- priv->ahb_gate_mask <<= priv->phy_index * AHB_CLK_DIST;
- extra_ahb_gate_mask <<= priv->phy_index * AHB_CLK_DIST;
- priv->usb_gate_mask <<= priv->phy_index;
- priv->phy_index++; /* Non otg phys start at 1 */
+ priv->ahb_gate_mask <<= phys * AHB_CLK_DIST;
+ extra_ahb_gate_mask <<= phys * AHB_CLK_DIST;
+ priv->usb_gate_mask <<= phys;
setbits_le32(&priv->ccm->ahb_gate0,
priv->ahb_gate_mask | extra_ahb_gate_mask);
@@ -68,9 +90,6 @@
priv->ahb_gate_mask | extra_ahb_gate_mask);
#endif
- sunxi_usb_phy_init(priv->phy_index);
- sunxi_usb_phy_power_on(priv->phy_index);
-
return ohci_register(dev, regs);
}
@@ -79,12 +98,18 @@
struct ohci_sunxi_priv *priv = dev_get_priv(dev);
int ret;
+ if (generic_phy_valid(&priv->phy)) {
+ ret = generic_phy_exit(&priv->phy);
+ if (ret) {
+ pr_err("failed to exit %s USB PHY\n", dev->name);
+ return ret;
+ }
+ }
+
ret = ohci_deregister(dev);
if (ret)
return ret;
- sunxi_usb_phy_exit(priv->phy_index);
-
#ifdef CONFIG_SUNXI_GEN_SUN6I
clrbits_le32(&priv->ccm->ahb_reset0_cfg, priv->ahb_gate_mask);
#endif