| /* |
| * Copyright (c) 2012 Samsung Electronics. |
| * Abhilash Kesavan <a.kesavan@samsung.com> |
| * |
| * SPDX-License-Identifier: GPL-2.0+ |
| */ |
| |
| #include <common.h> |
| #include <fdtdec.h> |
| #include <asm/arch/gpio.h> |
| #include <asm/arch/pinmux.h> |
| #include <asm/arch/sromc.h> |
| |
| static void exynos5_uart_config(int peripheral) |
| { |
| int i, start, count; |
| |
| switch (peripheral) { |
| case PERIPH_ID_UART0: |
| start = EXYNOS5_GPIO_A00; |
| count = 4; |
| break; |
| case PERIPH_ID_UART1: |
| start = EXYNOS5_GPIO_D00; |
| count = 4; |
| break; |
| case PERIPH_ID_UART2: |
| start = EXYNOS5_GPIO_A10; |
| count = 4; |
| break; |
| case PERIPH_ID_UART3: |
| start = EXYNOS5_GPIO_A14; |
| count = 2; |
| break; |
| default: |
| debug("%s: invalid peripheral %d", __func__, peripheral); |
| return; |
| } |
| for (i = start; i < start + count; i++) { |
| gpio_set_pull(i, S5P_GPIO_PULL_NONE); |
| gpio_cfg_pin(i, S5P_GPIO_FUNC(0x2)); |
| } |
| } |
| |
| static void exynos5420_uart_config(int peripheral) |
| { |
| int i, start, count; |
| |
| switch (peripheral) { |
| case PERIPH_ID_UART0: |
| start = EXYNOS5420_GPIO_A00; |
| count = 4; |
| break; |
| case PERIPH_ID_UART1: |
| start = EXYNOS5420_GPIO_A04; |
| count = 4; |
| break; |
| case PERIPH_ID_UART2: |
| start = EXYNOS5420_GPIO_A10; |
| count = 4; |
| break; |
| case PERIPH_ID_UART3: |
| start = EXYNOS5420_GPIO_A14; |
| count = 2; |
| break; |
| default: |
| debug("%s: invalid peripheral %d", __func__, peripheral); |
| return; |
| } |
| |
| for (i = start; i < start + count; i++) { |
| gpio_set_pull(i, S5P_GPIO_PULL_NONE); |
| gpio_cfg_pin(i, S5P_GPIO_FUNC(0x2)); |
| } |
| } |
| |
| static int exynos5_mmc_config(int peripheral, int flags) |
| { |
| int i, start, start_ext, gpio_func = 0; |
| |
| switch (peripheral) { |
| case PERIPH_ID_SDMMC0: |
| start = EXYNOS5_GPIO_C00; |
| start_ext = EXYNOS5_GPIO_C10; |
| gpio_func = S5P_GPIO_FUNC(0x2); |
| break; |
| case PERIPH_ID_SDMMC1: |
| start = EXYNOS5_GPIO_C20; |
| start_ext = 0; |
| break; |
| case PERIPH_ID_SDMMC2: |
| start = EXYNOS5_GPIO_C30; |
| start_ext = EXYNOS5_GPIO_C43; |
| gpio_func = S5P_GPIO_FUNC(0x3); |
| break; |
| case PERIPH_ID_SDMMC3: |
| start = EXYNOS5_GPIO_C40; |
| start_ext = 0; |
| break; |
| default: |
| debug("%s: invalid peripheral %d", __func__, peripheral); |
| return -1; |
| } |
| if ((flags & PINMUX_FLAG_8BIT_MODE) && !start_ext) { |
| debug("SDMMC device %d does not support 8bit mode", |
| peripheral); |
| return -1; |
| } |
| if (flags & PINMUX_FLAG_8BIT_MODE) { |
| for (i = start_ext; i <= (start_ext + 3); i++) { |
| gpio_cfg_pin(i, gpio_func); |
| gpio_set_pull(i, S5P_GPIO_PULL_UP); |
| gpio_set_drv(i, S5P_GPIO_DRV_4X); |
| } |
| } |
| for (i = start; i < (start + 2); i++) { |
| gpio_cfg_pin(i, S5P_GPIO_FUNC(0x2)); |
| gpio_set_pull(i, S5P_GPIO_PULL_NONE); |
| gpio_set_drv(i, S5P_GPIO_DRV_4X); |
| } |
| for (i = (start + 3); i <= (start + 6); i++) { |
| gpio_cfg_pin(i, S5P_GPIO_FUNC(0x2)); |
| gpio_set_pull(i, S5P_GPIO_PULL_UP); |
| gpio_set_drv(i, S5P_GPIO_DRV_4X); |
| } |
| |
| return 0; |
| } |
| |
| static int exynos5420_mmc_config(int peripheral, int flags) |
| { |
| int i, start = 0, start_ext = 0; |
| |
| switch (peripheral) { |
| case PERIPH_ID_SDMMC0: |
| start = EXYNOS5420_GPIO_C00; |
| start_ext = EXYNOS5420_GPIO_C30; |
| break; |
| case PERIPH_ID_SDMMC1: |
| start = EXYNOS5420_GPIO_C10; |
| start_ext = EXYNOS5420_GPIO_D14; |
| break; |
| case PERIPH_ID_SDMMC2: |
| start = EXYNOS5420_GPIO_C20; |
| start_ext = 0; |
| break; |
| default: |
| start = 0; |
| debug("%s: invalid peripheral %d", __func__, peripheral); |
| return -1; |
| } |
| |
| if ((flags & PINMUX_FLAG_8BIT_MODE) && !start_ext) { |
| debug("SDMMC device %d does not support 8bit mode", |
| peripheral); |
| return -1; |
| } |
| |
| if (flags & PINMUX_FLAG_8BIT_MODE) { |
| for (i = start_ext; i <= (start_ext + 3); i++) { |
| gpio_cfg_pin(i, S5P_GPIO_FUNC(0x2)); |
| gpio_set_pull(i, S5P_GPIO_PULL_UP); |
| gpio_set_drv(i, S5P_GPIO_DRV_4X); |
| } |
| } |
| |
| for (i = start; i < (start + 3); i++) { |
| /* |
| * MMC0 is intended to be used for eMMC. The |
| * card detect pin is used as a VDDEN signal to |
| * power on the eMMC. The 5420 iROM makes |
| * this same assumption. |
| */ |
| if ((peripheral == PERIPH_ID_SDMMC0) && (i == (start + 2))) { |
| gpio_set_value(i, 1); |
| gpio_cfg_pin(i, S5P_GPIO_OUTPUT); |
| } else { |
| gpio_cfg_pin(i, S5P_GPIO_FUNC(0x2)); |
| } |
| gpio_set_pull(i, S5P_GPIO_PULL_NONE); |
| gpio_set_drv(i, S5P_GPIO_DRV_4X); |
| } |
| |
| for (i = (start + 3); i <= (start + 6); i++) { |
| gpio_cfg_pin(i, S5P_GPIO_FUNC(0x2)); |
| gpio_set_pull(i, S5P_GPIO_PULL_UP); |
| gpio_set_drv(i, S5P_GPIO_DRV_4X); |
| } |
| |
| return 0; |
| } |
| |
| static void exynos5_sromc_config(int flags) |
| { |
| int i; |
| |
| /* |
| * SROM:CS1 and EBI |
| * |
| * GPY0[0] SROM_CSn[0] |
| * GPY0[1] SROM_CSn[1](2) |
| * GPY0[2] SROM_CSn[2] |
| * GPY0[3] SROM_CSn[3] |
| * GPY0[4] EBI_OEn(2) |
| * GPY0[5] EBI_EEn(2) |
| * |
| * GPY1[0] EBI_BEn[0](2) |
| * GPY1[1] EBI_BEn[1](2) |
| * GPY1[2] SROM_WAIT(2) |
| * GPY1[3] EBI_DATA_RDn(2) |
| */ |
| gpio_cfg_pin(EXYNOS5_GPIO_Y00 + (flags & PINMUX_FLAG_BANK), |
| S5P_GPIO_FUNC(2)); |
| gpio_cfg_pin(EXYNOS5_GPIO_Y04, S5P_GPIO_FUNC(2)); |
| gpio_cfg_pin(EXYNOS5_GPIO_Y05, S5P_GPIO_FUNC(2)); |
| |
| for (i = 0; i < 4; i++) |
| gpio_cfg_pin(EXYNOS5_GPIO_Y10 + i, S5P_GPIO_FUNC(2)); |
| |
| /* |
| * EBI: 8 Addrss Lines |
| * |
| * GPY3[0] EBI_ADDR[0](2) |
| * GPY3[1] EBI_ADDR[1](2) |
| * GPY3[2] EBI_ADDR[2](2) |
| * GPY3[3] EBI_ADDR[3](2) |
| * GPY3[4] EBI_ADDR[4](2) |
| * GPY3[5] EBI_ADDR[5](2) |
| * GPY3[6] EBI_ADDR[6](2) |
| * GPY3[7] EBI_ADDR[7](2) |
| * |
| * EBI: 16 Data Lines |
| * |
| * GPY5[0] EBI_DATA[0](2) |
| * GPY5[1] EBI_DATA[1](2) |
| * GPY5[2] EBI_DATA[2](2) |
| * GPY5[3] EBI_DATA[3](2) |
| * GPY5[4] EBI_DATA[4](2) |
| * GPY5[5] EBI_DATA[5](2) |
| * GPY5[6] EBI_DATA[6](2) |
| * GPY5[7] EBI_DATA[7](2) |
| * |
| * GPY6[0] EBI_DATA[8](2) |
| * GPY6[1] EBI_DATA[9](2) |
| * GPY6[2] EBI_DATA[10](2) |
| * GPY6[3] EBI_DATA[11](2) |
| * GPY6[4] EBI_DATA[12](2) |
| * GPY6[5] EBI_DATA[13](2) |
| * GPY6[6] EBI_DATA[14](2) |
| * GPY6[7] EBI_DATA[15](2) |
| */ |
| for (i = 0; i < 8; i++) { |
| gpio_cfg_pin(EXYNOS5_GPIO_Y30 + i, S5P_GPIO_FUNC(2)); |
| gpio_set_pull(EXYNOS5_GPIO_Y30 + i, S5P_GPIO_PULL_UP); |
| |
| gpio_cfg_pin(EXYNOS5_GPIO_Y50 + i, S5P_GPIO_FUNC(2)); |
| gpio_set_pull(EXYNOS5_GPIO_Y50 + i, S5P_GPIO_PULL_UP); |
| |
| gpio_cfg_pin(EXYNOS5_GPIO_Y60 + i, S5P_GPIO_FUNC(2)); |
| gpio_set_pull(EXYNOS5_GPIO_Y60 + i, S5P_GPIO_PULL_UP); |
| } |
| } |
| |
| static void exynos5_i2c_config(int peripheral, int flags) |
| { |
| switch (peripheral) { |
| case PERIPH_ID_I2C0: |
| gpio_cfg_pin(EXYNOS5_GPIO_B30, S5P_GPIO_FUNC(0x2)); |
| gpio_cfg_pin(EXYNOS5_GPIO_B31, S5P_GPIO_FUNC(0x2)); |
| break; |
| case PERIPH_ID_I2C1: |
| gpio_cfg_pin(EXYNOS5_GPIO_B32, S5P_GPIO_FUNC(0x2)); |
| gpio_cfg_pin(EXYNOS5_GPIO_B33, S5P_GPIO_FUNC(0x2)); |
| break; |
| case PERIPH_ID_I2C2: |
| gpio_cfg_pin(EXYNOS5_GPIO_A06, S5P_GPIO_FUNC(0x3)); |
| gpio_cfg_pin(EXYNOS5_GPIO_A07, S5P_GPIO_FUNC(0x3)); |
| break; |
| case PERIPH_ID_I2C3: |
| gpio_cfg_pin(EXYNOS5_GPIO_A12, S5P_GPIO_FUNC(0x3)); |
| gpio_cfg_pin(EXYNOS5_GPIO_A13, S5P_GPIO_FUNC(0x3)); |
| break; |
| case PERIPH_ID_I2C4: |
| gpio_cfg_pin(EXYNOS5_GPIO_A20, S5P_GPIO_FUNC(0x3)); |
| gpio_cfg_pin(EXYNOS5_GPIO_A21, S5P_GPIO_FUNC(0x3)); |
| break; |
| case PERIPH_ID_I2C5: |
| gpio_cfg_pin(EXYNOS5_GPIO_A22, S5P_GPIO_FUNC(0x3)); |
| gpio_cfg_pin(EXYNOS5_GPIO_A23, S5P_GPIO_FUNC(0x3)); |
| break; |
| case PERIPH_ID_I2C6: |
| gpio_cfg_pin(EXYNOS5_GPIO_B13, S5P_GPIO_FUNC(0x4)); |
| gpio_cfg_pin(EXYNOS5_GPIO_B14, S5P_GPIO_FUNC(0x4)); |
| break; |
| case PERIPH_ID_I2C7: |
| gpio_cfg_pin(EXYNOS5_GPIO_B22, S5P_GPIO_FUNC(0x3)); |
| gpio_cfg_pin(EXYNOS5_GPIO_B23, S5P_GPIO_FUNC(0x3)); |
| break; |
| } |
| } |
| |
| static void exynos5420_i2c_config(int peripheral) |
| { |
| switch (peripheral) { |
| case PERIPH_ID_I2C0: |
| gpio_cfg_pin(EXYNOS5420_GPIO_B30, S5P_GPIO_FUNC(0x2)); |
| gpio_cfg_pin(EXYNOS5420_GPIO_B31, S5P_GPIO_FUNC(0x2)); |
| break; |
| case PERIPH_ID_I2C1: |
| gpio_cfg_pin(EXYNOS5420_GPIO_B32, S5P_GPIO_FUNC(0x2)); |
| gpio_cfg_pin(EXYNOS5420_GPIO_B33, S5P_GPIO_FUNC(0x2)); |
| break; |
| case PERIPH_ID_I2C2: |
| gpio_cfg_pin(EXYNOS5420_GPIO_A06, S5P_GPIO_FUNC(0x3)); |
| gpio_cfg_pin(EXYNOS5420_GPIO_A07, S5P_GPIO_FUNC(0x3)); |
| break; |
| case PERIPH_ID_I2C3: |
| gpio_cfg_pin(EXYNOS5420_GPIO_A12, S5P_GPIO_FUNC(0x3)); |
| gpio_cfg_pin(EXYNOS5420_GPIO_A13, S5P_GPIO_FUNC(0x3)); |
| break; |
| case PERIPH_ID_I2C4: |
| gpio_cfg_pin(EXYNOS5420_GPIO_A20, S5P_GPIO_FUNC(0x3)); |
| gpio_cfg_pin(EXYNOS5420_GPIO_A21, S5P_GPIO_FUNC(0x3)); |
| break; |
| case PERIPH_ID_I2C5: |
| gpio_cfg_pin(EXYNOS5420_GPIO_A22, S5P_GPIO_FUNC(0x3)); |
| gpio_cfg_pin(EXYNOS5420_GPIO_A23, S5P_GPIO_FUNC(0x3)); |
| break; |
| case PERIPH_ID_I2C6: |
| gpio_cfg_pin(EXYNOS5420_GPIO_B13, S5P_GPIO_FUNC(0x4)); |
| gpio_cfg_pin(EXYNOS5420_GPIO_B14, S5P_GPIO_FUNC(0x4)); |
| break; |
| case PERIPH_ID_I2C7: |
| gpio_cfg_pin(EXYNOS5420_GPIO_B22, S5P_GPIO_FUNC(0x3)); |
| gpio_cfg_pin(EXYNOS5420_GPIO_B23, S5P_GPIO_FUNC(0x3)); |
| break; |
| case PERIPH_ID_I2C8: |
| gpio_cfg_pin(EXYNOS5420_GPIO_B34, S5P_GPIO_FUNC(0x2)); |
| gpio_cfg_pin(EXYNOS5420_GPIO_B35, S5P_GPIO_FUNC(0x2)); |
| break; |
| case PERIPH_ID_I2C9: |
| gpio_cfg_pin(EXYNOS5420_GPIO_B36, S5P_GPIO_FUNC(0x2)); |
| gpio_cfg_pin(EXYNOS5420_GPIO_B37, S5P_GPIO_FUNC(0x2)); |
| break; |
| case PERIPH_ID_I2C10: |
| gpio_cfg_pin(EXYNOS5420_GPIO_B40, S5P_GPIO_FUNC(0x2)); |
| gpio_cfg_pin(EXYNOS5420_GPIO_B41, S5P_GPIO_FUNC(0x2)); |
| break; |
| } |
| } |
| |
| static void exynos5_i2s_config(int peripheral) |
| { |
| int i; |
| |
| switch (peripheral) { |
| case PERIPH_ID_I2S0: |
| for (i = 0; i < 5; i++) |
| gpio_cfg_pin(EXYNOS5_GPIO_Z0 + i, S5P_GPIO_FUNC(0x02)); |
| break; |
| case PERIPH_ID_I2S1: |
| for (i = 0; i < 5; i++) |
| gpio_cfg_pin(EXYNOS5_GPIO_B00 + i, S5P_GPIO_FUNC(0x02)); |
| break; |
| } |
| } |
| |
| void exynos5_spi_config(int peripheral) |
| { |
| int cfg = 0, pin = 0, i; |
| |
| switch (peripheral) { |
| case PERIPH_ID_SPI0: |
| cfg = S5P_GPIO_FUNC(0x2); |
| pin = EXYNOS5_GPIO_A20; |
| break; |
| case PERIPH_ID_SPI1: |
| cfg = S5P_GPIO_FUNC(0x2); |
| pin = EXYNOS5_GPIO_A24; |
| break; |
| case PERIPH_ID_SPI2: |
| cfg = S5P_GPIO_FUNC(0x5); |
| pin = EXYNOS5_GPIO_B11; |
| break; |
| case PERIPH_ID_SPI3: |
| cfg = S5P_GPIO_FUNC(0x2); |
| pin = EXYNOS5_GPIO_F10; |
| break; |
| case PERIPH_ID_SPI4: |
| for (i = 0; i < 2; i++) { |
| gpio_cfg_pin(EXYNOS5_GPIO_F02 + i, S5P_GPIO_FUNC(0x4)); |
| gpio_cfg_pin(EXYNOS5_GPIO_E04 + i, S5P_GPIO_FUNC(0x4)); |
| } |
| break; |
| } |
| if (peripheral != PERIPH_ID_SPI4) { |
| for (i = pin; i < pin + 4; i++) |
| gpio_cfg_pin(i, cfg); |
| } |
| } |
| |
| void exynos5420_spi_config(int peripheral) |
| { |
| int cfg, pin, i; |
| |
| switch (peripheral) { |
| case PERIPH_ID_SPI0: |
| pin = EXYNOS5420_GPIO_A20; |
| cfg = S5P_GPIO_FUNC(0x2); |
| break; |
| case PERIPH_ID_SPI1: |
| pin = EXYNOS5420_GPIO_A24; |
| cfg = S5P_GPIO_FUNC(0x2); |
| break; |
| case PERIPH_ID_SPI2: |
| pin = EXYNOS5420_GPIO_B11; |
| cfg = S5P_GPIO_FUNC(0x5); |
| break; |
| case PERIPH_ID_SPI3: |
| pin = EXYNOS5420_GPIO_F10; |
| cfg = S5P_GPIO_FUNC(0x2); |
| break; |
| case PERIPH_ID_SPI4: |
| cfg = 0; |
| pin = 0; |
| break; |
| default: |
| cfg = 0; |
| pin = 0; |
| debug("%s: invalid peripheral %d", __func__, peripheral); |
| return; |
| } |
| |
| if (peripheral != PERIPH_ID_SPI4) { |
| for (i = pin; i < pin + 4; i++) |
| gpio_cfg_pin(i, cfg); |
| } else { |
| for (i = 0; i < 2; i++) { |
| gpio_cfg_pin(EXYNOS5420_GPIO_F02 + i, |
| S5P_GPIO_FUNC(0x4)); |
| gpio_cfg_pin(EXYNOS5420_GPIO_E04 + i, |
| S5P_GPIO_FUNC(0x4)); |
| } |
| } |
| } |
| |
| static int exynos5_pinmux_config(int peripheral, int flags) |
| { |
| switch (peripheral) { |
| case PERIPH_ID_UART0: |
| case PERIPH_ID_UART1: |
| case PERIPH_ID_UART2: |
| case PERIPH_ID_UART3: |
| exynos5_uart_config(peripheral); |
| break; |
| case PERIPH_ID_SDMMC0: |
| case PERIPH_ID_SDMMC1: |
| case PERIPH_ID_SDMMC2: |
| case PERIPH_ID_SDMMC3: |
| return exynos5_mmc_config(peripheral, flags); |
| case PERIPH_ID_SROMC: |
| exynos5_sromc_config(flags); |
| break; |
| case PERIPH_ID_I2C0: |
| case PERIPH_ID_I2C1: |
| case PERIPH_ID_I2C2: |
| case PERIPH_ID_I2C3: |
| case PERIPH_ID_I2C4: |
| case PERIPH_ID_I2C5: |
| case PERIPH_ID_I2C6: |
| case PERIPH_ID_I2C7: |
| exynos5_i2c_config(peripheral, flags); |
| break; |
| case PERIPH_ID_I2S0: |
| case PERIPH_ID_I2S1: |
| exynos5_i2s_config(peripheral); |
| break; |
| case PERIPH_ID_SPI0: |
| case PERIPH_ID_SPI1: |
| case PERIPH_ID_SPI2: |
| case PERIPH_ID_SPI3: |
| case PERIPH_ID_SPI4: |
| exynos5_spi_config(peripheral); |
| break; |
| default: |
| debug("%s: invalid peripheral %d", __func__, peripheral); |
| return -1; |
| } |
| |
| return 0; |
| } |
| |
| static int exynos5420_pinmux_config(int peripheral, int flags) |
| { |
| switch (peripheral) { |
| case PERIPH_ID_UART0: |
| case PERIPH_ID_UART1: |
| case PERIPH_ID_UART2: |
| case PERIPH_ID_UART3: |
| exynos5420_uart_config(peripheral); |
| break; |
| case PERIPH_ID_SDMMC0: |
| case PERIPH_ID_SDMMC1: |
| case PERIPH_ID_SDMMC2: |
| case PERIPH_ID_SDMMC3: |
| return exynos5420_mmc_config(peripheral, flags); |
| case PERIPH_ID_SPI0: |
| case PERIPH_ID_SPI1: |
| case PERIPH_ID_SPI2: |
| case PERIPH_ID_SPI3: |
| case PERIPH_ID_SPI4: |
| exynos5420_spi_config(peripheral); |
| break; |
| case PERIPH_ID_I2C0: |
| case PERIPH_ID_I2C1: |
| case PERIPH_ID_I2C2: |
| case PERIPH_ID_I2C3: |
| case PERIPH_ID_I2C4: |
| case PERIPH_ID_I2C5: |
| case PERIPH_ID_I2C6: |
| case PERIPH_ID_I2C7: |
| case PERIPH_ID_I2C8: |
| case PERIPH_ID_I2C9: |
| case PERIPH_ID_I2C10: |
| exynos5420_i2c_config(peripheral); |
| break; |
| default: |
| debug("%s: invalid peripheral %d", __func__, peripheral); |
| return -1; |
| } |
| |
| return 0; |
| } |
| |
| static void exynos4_i2c_config(int peripheral, int flags) |
| { |
| switch (peripheral) { |
| case PERIPH_ID_I2C0: |
| gpio_cfg_pin(EXYNOS4_GPIO_D10, S5P_GPIO_FUNC(0x2)); |
| gpio_cfg_pin(EXYNOS4_GPIO_D11, S5P_GPIO_FUNC(0x2)); |
| break; |
| case PERIPH_ID_I2C1: |
| gpio_cfg_pin(EXYNOS4_GPIO_D12, S5P_GPIO_FUNC(0x2)); |
| gpio_cfg_pin(EXYNOS4_GPIO_D13, S5P_GPIO_FUNC(0x2)); |
| break; |
| case PERIPH_ID_I2C2: |
| gpio_cfg_pin(EXYNOS4_GPIO_A06, S5P_GPIO_FUNC(0x3)); |
| gpio_cfg_pin(EXYNOS4_GPIO_A07, S5P_GPIO_FUNC(0x3)); |
| break; |
| case PERIPH_ID_I2C3: |
| gpio_cfg_pin(EXYNOS4_GPIO_A12, S5P_GPIO_FUNC(0x3)); |
| gpio_cfg_pin(EXYNOS4_GPIO_A13, S5P_GPIO_FUNC(0x3)); |
| break; |
| case PERIPH_ID_I2C4: |
| gpio_cfg_pin(EXYNOS4_GPIO_B2, S5P_GPIO_FUNC(0x3)); |
| gpio_cfg_pin(EXYNOS4_GPIO_B3, S5P_GPIO_FUNC(0x3)); |
| break; |
| case PERIPH_ID_I2C5: |
| gpio_cfg_pin(EXYNOS4_GPIO_B6, S5P_GPIO_FUNC(0x3)); |
| gpio_cfg_pin(EXYNOS4_GPIO_B7, S5P_GPIO_FUNC(0x3)); |
| break; |
| case PERIPH_ID_I2C6: |
| gpio_cfg_pin(EXYNOS4_GPIO_C13, S5P_GPIO_FUNC(0x4)); |
| gpio_cfg_pin(EXYNOS4_GPIO_C14, S5P_GPIO_FUNC(0x4)); |
| break; |
| case PERIPH_ID_I2C7: |
| gpio_cfg_pin(EXYNOS4_GPIO_D02, S5P_GPIO_FUNC(0x3)); |
| gpio_cfg_pin(EXYNOS4_GPIO_D03, S5P_GPIO_FUNC(0x3)); |
| break; |
| } |
| } |
| |
| static int exynos4_mmc_config(int peripheral, int flags) |
| { |
| int i, start = 0, start_ext = 0; |
| |
| switch (peripheral) { |
| case PERIPH_ID_SDMMC0: |
| start = EXYNOS4_GPIO_K00; |
| start_ext = EXYNOS4_GPIO_K13; |
| break; |
| case PERIPH_ID_SDMMC2: |
| start = EXYNOS4_GPIO_K20; |
| start_ext = EXYNOS4_GPIO_K33; |
| break; |
| default: |
| return -1; |
| } |
| for (i = start; i < (start + 7); i++) { |
| if (i == (start + 2)) |
| continue; |
| gpio_cfg_pin(i, S5P_GPIO_FUNC(0x2)); |
| gpio_set_pull(i, S5P_GPIO_PULL_NONE); |
| gpio_set_drv(i, S5P_GPIO_DRV_4X); |
| } |
| if (flags & PINMUX_FLAG_8BIT_MODE) { |
| for (i = start_ext; i < (start_ext + 4); i++) { |
| gpio_cfg_pin(i, S5P_GPIO_FUNC(0x3)); |
| gpio_set_pull(i, S5P_GPIO_PULL_NONE); |
| gpio_set_drv(i, S5P_GPIO_DRV_4X); |
| } |
| } |
| |
| return 0; |
| } |
| |
| static void exynos4_uart_config(int peripheral) |
| { |
| int i, start, count; |
| |
| switch (peripheral) { |
| case PERIPH_ID_UART0: |
| start = EXYNOS4_GPIO_A00; |
| count = 4; |
| break; |
| case PERIPH_ID_UART1: |
| start = EXYNOS4_GPIO_A04; |
| count = 4; |
| break; |
| case PERIPH_ID_UART2: |
| start = EXYNOS4_GPIO_A10; |
| count = 4; |
| break; |
| case PERIPH_ID_UART3: |
| start = EXYNOS4_GPIO_A14; |
| count = 2; |
| break; |
| default: |
| debug("%s: invalid peripheral %d", __func__, peripheral); |
| return; |
| } |
| for (i = start; i < (start + count); i++) { |
| gpio_set_pull(i, S5P_GPIO_PULL_NONE); |
| gpio_cfg_pin(i, S5P_GPIO_FUNC(0x2)); |
| } |
| } |
| |
| static void exynos4x12_i2c_config(int peripheral, int flags) |
| { |
| switch (peripheral) { |
| case PERIPH_ID_I2C0: |
| gpio_cfg_pin(EXYNOS4X12_GPIO_D10, S5P_GPIO_FUNC(0x2)); |
| gpio_cfg_pin(EXYNOS4X12_GPIO_D11, S5P_GPIO_FUNC(0x2)); |
| break; |
| case PERIPH_ID_I2C1: |
| gpio_cfg_pin(EXYNOS4X12_GPIO_D12, S5P_GPIO_FUNC(0x2)); |
| gpio_cfg_pin(EXYNOS4X12_GPIO_D13, S5P_GPIO_FUNC(0x2)); |
| break; |
| case PERIPH_ID_I2C2: |
| gpio_cfg_pin(EXYNOS4X12_GPIO_A06, S5P_GPIO_FUNC(0x3)); |
| gpio_cfg_pin(EXYNOS4X12_GPIO_A07, S5P_GPIO_FUNC(0x3)); |
| break; |
| case PERIPH_ID_I2C3: |
| gpio_cfg_pin(EXYNOS4X12_GPIO_A12, S5P_GPIO_FUNC(0x3)); |
| gpio_cfg_pin(EXYNOS4X12_GPIO_A13, S5P_GPIO_FUNC(0x3)); |
| break; |
| case PERIPH_ID_I2C4: |
| gpio_cfg_pin(EXYNOS4X12_GPIO_B2, S5P_GPIO_FUNC(0x3)); |
| gpio_cfg_pin(EXYNOS4X12_GPIO_B3, S5P_GPIO_FUNC(0x3)); |
| break; |
| case PERIPH_ID_I2C5: |
| gpio_cfg_pin(EXYNOS4X12_GPIO_B6, S5P_GPIO_FUNC(0x3)); |
| gpio_cfg_pin(EXYNOS4X12_GPIO_B7, S5P_GPIO_FUNC(0x3)); |
| break; |
| case PERIPH_ID_I2C6: |
| gpio_cfg_pin(EXYNOS4X12_GPIO_C13, S5P_GPIO_FUNC(0x4)); |
| gpio_cfg_pin(EXYNOS4X12_GPIO_C14, S5P_GPIO_FUNC(0x4)); |
| break; |
| case PERIPH_ID_I2C7: |
| gpio_cfg_pin(EXYNOS4X12_GPIO_D02, S5P_GPIO_FUNC(0x3)); |
| gpio_cfg_pin(EXYNOS4X12_GPIO_D03, S5P_GPIO_FUNC(0x3)); |
| break; |
| } |
| } |
| |
| static int exynos4x12_mmc_config(int peripheral, int flags) |
| { |
| int i, start = 0, start_ext = 0; |
| |
| switch (peripheral) { |
| case PERIPH_ID_SDMMC0: |
| start = EXYNOS4X12_GPIO_K00; |
| start_ext = EXYNOS4X12_GPIO_K13; |
| break; |
| case PERIPH_ID_SDMMC2: |
| start = EXYNOS4X12_GPIO_K20; |
| start_ext = EXYNOS4X12_GPIO_K33; |
| break; |
| default: |
| return -1; |
| } |
| for (i = start; i < (start + 7); i++) { |
| if (i == (start + 2)) |
| continue; |
| gpio_cfg_pin(i, S5P_GPIO_FUNC(0x2)); |
| gpio_set_pull(i, S5P_GPIO_PULL_NONE); |
| gpio_set_drv(i, S5P_GPIO_DRV_4X); |
| } |
| if (flags & PINMUX_FLAG_8BIT_MODE) { |
| for (i = start_ext; i < (start_ext + 4); i++) { |
| gpio_cfg_pin(i, S5P_GPIO_FUNC(0x3)); |
| gpio_set_pull(i, S5P_GPIO_PULL_NONE); |
| gpio_set_drv(i, S5P_GPIO_DRV_4X); |
| } |
| } |
| |
| return 0; |
| } |
| |
| static void exynos4x12_uart_config(int peripheral) |
| { |
| int i, start, count; |
| |
| switch (peripheral) { |
| case PERIPH_ID_UART0: |
| start = EXYNOS4X12_GPIO_A00; |
| count = 4; |
| break; |
| case PERIPH_ID_UART1: |
| start = EXYNOS4X12_GPIO_A04; |
| count = 4; |
| break; |
| case PERIPH_ID_UART2: |
| start = EXYNOS4X12_GPIO_A10; |
| count = 4; |
| break; |
| case PERIPH_ID_UART3: |
| start = EXYNOS4X12_GPIO_A14; |
| count = 2; |
| break; |
| default: |
| debug("%s: invalid peripheral %d", __func__, peripheral); |
| return; |
| } |
| for (i = start; i < (start + count); i++) { |
| gpio_set_pull(i, S5P_GPIO_PULL_NONE); |
| gpio_cfg_pin(i, S5P_GPIO_FUNC(0x2)); |
| } |
| } |
| |
| static int exynos4_pinmux_config(int peripheral, int flags) |
| { |
| switch (peripheral) { |
| case PERIPH_ID_UART0: |
| case PERIPH_ID_UART1: |
| case PERIPH_ID_UART2: |
| case PERIPH_ID_UART3: |
| exynos4_uart_config(peripheral); |
| break; |
| case PERIPH_ID_I2C0: |
| case PERIPH_ID_I2C1: |
| case PERIPH_ID_I2C2: |
| case PERIPH_ID_I2C3: |
| case PERIPH_ID_I2C4: |
| case PERIPH_ID_I2C5: |
| case PERIPH_ID_I2C6: |
| case PERIPH_ID_I2C7: |
| exynos4_i2c_config(peripheral, flags); |
| break; |
| case PERIPH_ID_SDMMC0: |
| case PERIPH_ID_SDMMC2: |
| return exynos4_mmc_config(peripheral, flags); |
| case PERIPH_ID_SDMMC1: |
| case PERIPH_ID_SDMMC3: |
| case PERIPH_ID_SDMMC4: |
| debug("SDMMC device %d not implemented\n", peripheral); |
| return -1; |
| default: |
| debug("%s: invalid peripheral %d", __func__, peripheral); |
| return -1; |
| } |
| |
| return 0; |
| } |
| |
| static int exynos4x12_pinmux_config(int peripheral, int flags) |
| { |
| switch (peripheral) { |
| case PERIPH_ID_UART0: |
| case PERIPH_ID_UART1: |
| case PERIPH_ID_UART2: |
| case PERIPH_ID_UART3: |
| exynos4x12_uart_config(peripheral); |
| break; |
| case PERIPH_ID_I2C0: |
| case PERIPH_ID_I2C1: |
| case PERIPH_ID_I2C2: |
| case PERIPH_ID_I2C3: |
| case PERIPH_ID_I2C4: |
| case PERIPH_ID_I2C5: |
| case PERIPH_ID_I2C6: |
| case PERIPH_ID_I2C7: |
| exynos4x12_i2c_config(peripheral, flags); |
| break; |
| case PERIPH_ID_SDMMC0: |
| case PERIPH_ID_SDMMC2: |
| return exynos4x12_mmc_config(peripheral, flags); |
| case PERIPH_ID_SDMMC1: |
| case PERIPH_ID_SDMMC3: |
| case PERIPH_ID_SDMMC4: |
| debug("SDMMC device %d not implemented\n", peripheral); |
| return -1; |
| default: |
| debug("%s: invalid peripheral %d", __func__, peripheral); |
| return -1; |
| } |
| |
| return 0; |
| } |
| |
| int exynos_pinmux_config(int peripheral, int flags) |
| { |
| if (cpu_is_exynos5()) { |
| if (proid_is_exynos5420()) |
| return exynos5420_pinmux_config(peripheral, flags); |
| else if (proid_is_exynos5250()) |
| return exynos5_pinmux_config(peripheral, flags); |
| } else if (cpu_is_exynos4()) { |
| if (proid_is_exynos4412()) |
| return exynos4x12_pinmux_config(peripheral, flags); |
| else |
| return exynos4_pinmux_config(peripheral, flags); |
| } |
| |
| debug("pinmux functionality not supported\n"); |
| |
| return -1; |
| } |
| |
| #ifdef CONFIG_OF_CONTROL |
| static int exynos4_pinmux_decode_periph_id(const void *blob, int node) |
| { |
| int err; |
| u32 cell[3]; |
| |
| err = fdtdec_get_int_array(blob, node, "interrupts", cell, |
| ARRAY_SIZE(cell)); |
| if (err) { |
| debug(" invalid peripheral id\n"); |
| return PERIPH_ID_NONE; |
| } |
| |
| return cell[1]; |
| } |
| |
| static int exynos5_pinmux_decode_periph_id(const void *blob, int node) |
| { |
| int err; |
| u32 cell[3]; |
| |
| err = fdtdec_get_int_array(blob, node, "interrupts", cell, |
| ARRAY_SIZE(cell)); |
| if (err) |
| return PERIPH_ID_NONE; |
| |
| return cell[1]; |
| } |
| |
| int pinmux_decode_periph_id(const void *blob, int node) |
| { |
| if (cpu_is_exynos5()) |
| return exynos5_pinmux_decode_periph_id(blob, node); |
| else if (cpu_is_exynos4()) |
| return exynos4_pinmux_decode_periph_id(blob, node); |
| |
| return PERIPH_ID_NONE; |
| } |
| #endif |