ARM: dts: renesas: Minimize R8A779G0 V4H RPC SPI DT node
The RPC SPI DT node is now part of mainline Linux DT, remove the
duplicate content from U-Boot DT extras. The SPI flash DT node name
has been changed from "spi-flash@0" to "flash@0", reflect this change
in this patch. Retain "bank-width" and "num-cs" DT properties which
are used by U-Boot. Retain "spi-rx-bus-width" and "spi-tx-bus-width"
DT properties to indicate the bus should always be operated in 1-1-1
mode as the U-Boot RPC SPI driver does not support higher bus width
modes yet.
Signed-off-by: Marek Vasut <marek.vasut+renesas@mailbox.org>
diff --git a/arch/arm/dts/r8a779g0-u-boot.dtsi b/arch/arm/dts/r8a779g0-u-boot.dtsi
index cc8beca..f60eba5 100644
--- a/arch/arm/dts/r8a779g0-u-boot.dtsi
+++ b/arch/arm/dts/r8a779g0-u-boot.dtsi
@@ -8,7 +8,6 @@
#include "r8a779x-u-boot.dtsi"
&rpc {
- reg = <0 0xee200000 0 0x200>, <0 0x08000000 0 0x04000000>;
bank-width = <2>;
num-cs = <1>;
};
diff --git a/arch/arm/dts/r8a779g0-white-hawk-u-boot.dtsi b/arch/arm/dts/r8a779g0-white-hawk-u-boot.dtsi
index a102639..c3704d7 100644
--- a/arch/arm/dts/r8a779g0-white-hawk-u-boot.dtsi
+++ b/arch/arm/dts/r8a779g0-white-hawk-u-boot.dtsi
@@ -13,29 +13,9 @@
};
};
-&pfc {
- qspi0_pins: qspi0 {
- groups = "qspi0_ctrl", "qspi0_data4";
- function = "qspi0";
- };
-};
-
&rpc {
- pinctrl-0 = <&qspi0_pins>;
- pinctrl-names = "default";
-
- #address-cells = <1>;
- #size-cells = <0>;
- spi-max-frequency = <40000000>;
- status = "disabled";
-
- spi-flash@0 {
- #address-cells = <1>;
- #size-cells = <1>;
- compatible = "s25fs512s", "jedec,spi-nor";
- reg = <0>;
+ flash@0 {
spi-tx-bus-width = <1>;
spi-rx-bus-width = <1>;
- spi-max-frequency = <40000000>;
};
};