clk: renesas: Add RZ/G2L & RZ/G2LC CPG driver
This driver provides clock and reset control for the Renesas R9A07G044L
(RZ/G2L) and R9A07G044C (RZ/G2LC) SoC. It consists of two parts:
* driver code which is applicable to all SoCs in the RZ/G2L family.
* static data describing the clocks and resets which are specific to the
R9A07G044{L,C} SoCs. The identifier r9a07g044 (without a final letter)
is used to indicate that both SoCs are supported.
clk_set_rate() and clk_get_rate() are implemented only for the clocks
that are actually used in u-boot.
The CPG driver is marked with DM_FLAG_PRE_RELOC to ensure that its bind
function is called before the SCIF (serial port) driver is probed. This
is required so that we can de-assert the relevant reset signal during
the serial driver probe function.
This patch is based on the corresponding Linux v6.5 driver
(commit 52e12027d50affbf60c6c9c64db8017391b0c22e).
Signed-off-by: Paul Barker <paul.barker.ct@bp.renesas.com>
Reviewed-by: Biju Das <biju.das.jz@bp.renesas.com>
Reviewed-by: Lad Prabhakar <prabhakar.mahadev-lad.rj@bp.renesas.com>
Reviewed-by: Marek Vasut <marek.vasut+renesas@mailbox.org>
diff --git a/drivers/clk/renesas/Kconfig b/drivers/clk/renesas/Kconfig
index 437a82c..927d62c 100644
--- a/drivers/clk/renesas/Kconfig
+++ b/drivers/clk/renesas/Kconfig
@@ -156,3 +156,12 @@
depends on CLK_RENESAS
help
Enable this to support the clocks on Renesas R9A06G032 SoC.
+
+config CLK_RZG2L
+ bool "Renesas RZ/G2L family clock support"
+ depends on CLK_RENESAS
+ select DM_RESET
+
+config CLK_R9A07G044
+ bool "RZ/G2L (R9A07G044L) clock support"
+ depends on CLK_RZG2L