| // SPDX-License-Identifier: GPL-2.0+ |
| /* |
| * TI divider clock support |
| * |
| * Copyright (C) 2020 Dario Binacchi <dariobin@libero.it> |
| * |
| * Loosely based on Linux kernel drivers/clk/ti/divider.c |
| */ |
| |
| #include <common.h> |
| #include <clk.h> |
| #include <clk-uclass.h> |
| #include <div64.h> |
| #include <dm.h> |
| #include <dm/device_compat.h> |
| #include <asm/io.h> |
| #include <linux/clk-provider.h> |
| #include <linux/kernel.h> |
| #include <linux/log2.h> |
| #include "clk.h" |
| |
| /* |
| * The reverse of DIV_ROUND_UP: The maximum number which |
| * divided by m is r |
| */ |
| #define MULT_ROUND_UP(r, m) ((r) * (m) + (m) - 1) |
| |
| struct clk_ti_divider_priv { |
| struct clk parent; |
| fdt_addr_t reg; |
| const struct clk_div_table *table; |
| u8 shift; |
| u8 flags; |
| u8 div_flags; |
| s8 latch; |
| u16 min; |
| u16 max; |
| u16 mask; |
| }; |
| |
| static unsigned int _get_div(const struct clk_div_table *table, ulong flags, |
| unsigned int val) |
| { |
| if (flags & CLK_DIVIDER_ONE_BASED) |
| return val; |
| |
| if (flags & CLK_DIVIDER_POWER_OF_TWO) |
| return 1 << val; |
| |
| if (table) |
| return clk_divider_get_table_div(table, val); |
| |
| return val + 1; |
| } |
| |
| static unsigned int _get_val(const struct clk_div_table *table, ulong flags, |
| unsigned int div) |
| { |
| if (flags & CLK_DIVIDER_ONE_BASED) |
| return div; |
| |
| if (flags & CLK_DIVIDER_POWER_OF_TWO) |
| return __ffs(div); |
| |
| if (table) |
| return clk_divider_get_table_val(table, div); |
| |
| return div - 1; |
| } |
| |
| static int _div_round_up(const struct clk_div_table *table, ulong parent_rate, |
| ulong rate) |
| { |
| const struct clk_div_table *clkt; |
| int up = INT_MAX; |
| int div = DIV_ROUND_UP_ULL((u64)parent_rate, rate); |
| |
| for (clkt = table; clkt->div; clkt++) { |
| if (clkt->div == div) |
| return clkt->div; |
| else if (clkt->div < div) |
| continue; |
| |
| if ((clkt->div - div) < (up - div)) |
| up = clkt->div; |
| } |
| |
| return up; |
| } |
| |
| static int _div_round(const struct clk_div_table *table, ulong parent_rate, |
| ulong rate) |
| { |
| if (table) |
| return _div_round_up(table, parent_rate, rate); |
| |
| return DIV_ROUND_UP(parent_rate, rate); |
| } |
| |
| static int clk_ti_divider_best_div(struct clk *clk, ulong rate, |
| ulong *best_parent_rate) |
| { |
| struct clk_ti_divider_priv *priv = dev_get_priv(clk->dev); |
| ulong parent_rate, parent_round_rate, max_div; |
| ulong best_rate, r; |
| int i, best_div = 0; |
| |
| parent_rate = clk_get_rate(&priv->parent); |
| if (IS_ERR_VALUE(parent_rate)) |
| return parent_rate; |
| |
| if (!rate) |
| rate = 1; |
| |
| if (!(clk->flags & CLK_SET_RATE_PARENT)) { |
| best_div = _div_round(priv->table, parent_rate, rate); |
| if (best_div == 0) |
| best_div = 1; |
| |
| if (best_div > priv->max) |
| best_div = priv->max; |
| |
| *best_parent_rate = parent_rate; |
| return best_div; |
| } |
| |
| max_div = min(ULONG_MAX / rate, (ulong)priv->max); |
| for (best_rate = 0, i = 1; i <= max_div; i++) { |
| if (!clk_divider_is_valid_div(priv->table, priv->div_flags, i)) |
| continue; |
| |
| /* |
| * It's the most ideal case if the requested rate can be |
| * divided from parent clock without needing to change |
| * parent rate, so return the divider immediately. |
| */ |
| if ((rate * i) == parent_rate) { |
| *best_parent_rate = parent_rate; |
| dev_dbg(clk->dev, "rate=%ld, best_rate=%ld, div=%d\n", |
| rate, rate, i); |
| return i; |
| } |
| |
| parent_round_rate = clk_round_rate(&priv->parent, |
| MULT_ROUND_UP(rate, i)); |
| if (IS_ERR_VALUE(parent_round_rate)) |
| continue; |
| |
| r = DIV_ROUND_UP(parent_round_rate, i); |
| if (r <= rate && r > best_rate) { |
| best_div = i; |
| best_rate = r; |
| *best_parent_rate = parent_round_rate; |
| if (best_rate == rate) |
| break; |
| } |
| } |
| |
| if (best_div == 0) { |
| best_div = priv->max; |
| parent_round_rate = clk_round_rate(&priv->parent, 1); |
| if (IS_ERR_VALUE(parent_round_rate)) |
| return parent_round_rate; |
| } |
| |
| dev_dbg(clk->dev, "rate=%ld, best_rate=%ld, div=%d\n", rate, best_rate, |
| best_div); |
| |
| return best_div; |
| } |
| |
| static ulong clk_ti_divider_round_rate(struct clk *clk, ulong rate) |
| { |
| ulong parent_rate; |
| int div; |
| |
| div = clk_ti_divider_best_div(clk, rate, &parent_rate); |
| if (div < 0) |
| return div; |
| |
| return DIV_ROUND_UP(parent_rate, div); |
| } |
| |
| static ulong clk_ti_divider_set_rate(struct clk *clk, ulong rate) |
| { |
| struct clk_ti_divider_priv *priv = dev_get_priv(clk->dev); |
| ulong parent_rate; |
| int div; |
| u32 val, v; |
| |
| div = clk_ti_divider_best_div(clk, rate, &parent_rate); |
| if (div < 0) |
| return div; |
| |
| if (clk->flags & CLK_SET_RATE_PARENT) { |
| parent_rate = clk_set_rate(&priv->parent, parent_rate); |
| if (IS_ERR_VALUE(parent_rate)) |
| return parent_rate; |
| } |
| |
| val = _get_val(priv->table, priv->div_flags, div); |
| |
| v = readl(priv->reg); |
| v &= ~(priv->mask << priv->shift); |
| v |= val << priv->shift; |
| writel(v, priv->reg); |
| clk_ti_latch(priv->reg, priv->latch); |
| |
| return clk_get_rate(clk); |
| } |
| |
| static ulong clk_ti_divider_get_rate(struct clk *clk) |
| { |
| struct clk_ti_divider_priv *priv = dev_get_priv(clk->dev); |
| ulong rate, parent_rate; |
| unsigned int div; |
| u32 v; |
| |
| parent_rate = clk_get_rate(&priv->parent); |
| if (IS_ERR_VALUE(parent_rate)) |
| return parent_rate; |
| |
| v = readl(priv->reg) >> priv->shift; |
| v &= priv->mask; |
| |
| div = _get_div(priv->table, priv->div_flags, v); |
| if (!div) { |
| if (!(priv->div_flags & CLK_DIVIDER_ALLOW_ZERO)) |
| dev_warn(clk->dev, |
| "zero divisor and CLK_DIVIDER_ALLOW_ZERO not set\n"); |
| return parent_rate; |
| } |
| |
| rate = DIV_ROUND_UP(parent_rate, div); |
| dev_dbg(clk->dev, "rate=%ld\n", rate); |
| return rate; |
| } |
| |
| static int clk_ti_divider_request(struct clk *clk) |
| { |
| struct clk_ti_divider_priv *priv = dev_get_priv(clk->dev); |
| |
| clk->flags = priv->flags; |
| return 0; |
| } |
| |
| const struct clk_ops clk_ti_divider_ops = { |
| .request = clk_ti_divider_request, |
| .round_rate = clk_ti_divider_round_rate, |
| .get_rate = clk_ti_divider_get_rate, |
| .set_rate = clk_ti_divider_set_rate |
| }; |
| |
| static int clk_ti_divider_remove(struct udevice *dev) |
| { |
| struct clk_ti_divider_priv *priv = dev_get_priv(dev); |
| int err; |
| |
| err = clk_release_all(&priv->parent, 1); |
| if (err) { |
| dev_err(dev, "failed to release parent clock\n"); |
| return err; |
| } |
| |
| return 0; |
| } |
| |
| static int clk_ti_divider_probe(struct udevice *dev) |
| { |
| struct clk_ti_divider_priv *priv = dev_get_priv(dev); |
| int err; |
| |
| err = clk_get_by_index(dev, 0, &priv->parent); |
| if (err) { |
| dev_err(dev, "failed to get parent clock\n"); |
| return err; |
| } |
| |
| return 0; |
| } |
| |
| static int clk_ti_divider_of_to_plat(struct udevice *dev) |
| { |
| struct clk_ti_divider_priv *priv = dev_get_priv(dev); |
| struct clk_div_table *table = NULL; |
| u32 val, valid_div; |
| u32 min_div = 0; |
| u32 max_val, max_div = 0; |
| u16 mask; |
| int i, div_num; |
| |
| priv->reg = dev_read_addr(dev); |
| dev_dbg(dev, "reg=0x%08lx\n", priv->reg); |
| priv->shift = dev_read_u32_default(dev, "ti,bit-shift", 0); |
| priv->latch = dev_read_s32_default(dev, "ti,latch-bit", -EINVAL); |
| if (dev_read_bool(dev, "ti,index-starts-at-one")) |
| priv->div_flags |= CLK_DIVIDER_ONE_BASED; |
| |
| if (dev_read_bool(dev, "ti,index-power-of-two")) |
| priv->div_flags |= CLK_DIVIDER_POWER_OF_TWO; |
| |
| if (dev_read_bool(dev, "ti,set-rate-parent")) |
| priv->flags |= CLK_SET_RATE_PARENT; |
| |
| if (dev_read_prop(dev, "ti,dividers", &div_num)) { |
| div_num /= sizeof(u32); |
| |
| /* Determine required size for divider table */ |
| for (i = 0, valid_div = 0; i < div_num; i++) { |
| dev_read_u32_index(dev, "ti,dividers", i, &val); |
| if (val) |
| valid_div++; |
| } |
| |
| if (!valid_div) { |
| dev_err(dev, "no valid dividers\n"); |
| return -EINVAL; |
| } |
| |
| table = calloc(valid_div + 1, sizeof(*table)); |
| if (!table) |
| return -ENOMEM; |
| |
| for (i = 0, valid_div = 0; i < div_num; i++) { |
| dev_read_u32_index(dev, "ti,dividers", i, &val); |
| if (!val) |
| continue; |
| |
| table[valid_div].div = val; |
| table[valid_div].val = i; |
| valid_div++; |
| if (val > max_div) |
| max_div = val; |
| |
| if (!min_div || val < min_div) |
| min_div = val; |
| } |
| |
| max_val = max_div; |
| } else { |
| /* Divider table not provided, determine min/max divs */ |
| min_div = dev_read_u32_default(dev, "ti,min-div", 1); |
| if (dev_read_u32(dev, "ti,max-div", &max_div)) { |
| dev_err(dev, "missing 'max-div' property\n"); |
| return -EFAULT; |
| } |
| |
| max_val = max_div; |
| if (!(priv->div_flags & CLK_DIVIDER_ONE_BASED) && |
| !(priv->div_flags & CLK_DIVIDER_POWER_OF_TWO)) |
| max_val--; |
| } |
| |
| priv->table = table; |
| priv->min = min_div; |
| priv->max = max_div; |
| |
| if (priv->div_flags & CLK_DIVIDER_POWER_OF_TWO) |
| mask = fls(max_val) - 1; |
| else |
| mask = max_val; |
| |
| priv->mask = (1 << fls(mask)) - 1; |
| return 0; |
| } |
| |
| static const struct udevice_id clk_ti_divider_of_match[] = { |
| {.compatible = "ti,divider-clock"}, |
| {} |
| }; |
| |
| U_BOOT_DRIVER(clk_ti_divider) = { |
| .name = "ti_divider_clock", |
| .id = UCLASS_CLK, |
| .of_match = clk_ti_divider_of_match, |
| .of_to_plat = clk_ti_divider_of_to_plat, |
| .probe = clk_ti_divider_probe, |
| .remove = clk_ti_divider_remove, |
| .priv_auto = sizeof(struct clk_ti_divider_priv), |
| .ops = &clk_ti_divider_ops, |
| }; |