| // SPDX-License-Identifier: GPL-2.0 |
| /* |
| * Interrupt Timer Subsystem |
| * |
| * Copyright (C) 2017 Intel Corporation. |
| * Copyright (C) 2017 Siemens AG |
| * Copyright 2019 Google LLC |
| * |
| * Taken from coreboot itss.c |
| */ |
| |
| #include <common.h> |
| #include <dm.h> |
| #include <dt-structs.h> |
| #include <irq.h> |
| #include <p2sb.h> |
| #include <spl.h> |
| #include <asm/arch/itss.h> |
| |
| struct apl_itss_platdata { |
| #if CONFIG_IS_ENABLED(OF_PLATDATA) |
| /* Put this first since driver model will copy the data here */ |
| struct dtd_intel_apl_itss dtplat; |
| #endif |
| }; |
| |
| /* struct pmc_route - Routing for PMC to GPIO */ |
| struct pmc_route { |
| u32 pmc; |
| u32 gpio; |
| }; |
| |
| struct apl_itss_priv { |
| struct pmc_route *route; |
| uint route_count; |
| u32 irq_snapshot[NUM_IPC_REGS]; |
| }; |
| |
| static int apl_set_polarity(struct udevice *dev, uint irq, bool active_low) |
| { |
| u32 mask; |
| uint reg; |
| |
| if (irq > ITSS_MAX_IRQ) |
| return -EINVAL; |
| |
| reg = PCR_ITSS_IPC0_CONF + sizeof(u32) * (irq / IRQS_PER_IPC); |
| mask = 1 << (irq % IRQS_PER_IPC); |
| |
| pcr_clrsetbits32(dev, reg, mask, active_low ? mask : 0); |
| |
| return 0; |
| } |
| |
| #ifndef CONFIG_TPL_BUILD |
| static int apl_snapshot_polarities(struct udevice *dev) |
| { |
| struct apl_itss_priv *priv = dev_get_priv(dev); |
| const int start = GPIO_IRQ_START; |
| const int end = GPIO_IRQ_END; |
| int reg_start; |
| int reg_end; |
| int i; |
| |
| reg_start = start / IRQS_PER_IPC; |
| reg_end = (end + IRQS_PER_IPC - 1) / IRQS_PER_IPC; |
| |
| for (i = reg_start; i < reg_end; i++) { |
| uint reg = PCR_ITSS_IPC0_CONF + sizeof(u32) * i; |
| |
| priv->irq_snapshot[i] = pcr_read32(dev, reg); |
| } |
| |
| return 0; |
| } |
| |
| static void show_polarities(struct udevice *dev, const char *msg) |
| { |
| int i; |
| |
| log_info("ITSS IRQ Polarities %s:\n", msg); |
| for (i = 0; i < NUM_IPC_REGS; i++) { |
| uint reg = PCR_ITSS_IPC0_CONF + sizeof(u32) * i; |
| |
| log_info("IPC%d: 0x%08x\n", i, pcr_read32(dev, reg)); |
| } |
| } |
| |
| static int apl_restore_polarities(struct udevice *dev) |
| { |
| struct apl_itss_priv *priv = dev_get_priv(dev); |
| const int start = GPIO_IRQ_START; |
| const int end = GPIO_IRQ_END; |
| int reg_start; |
| int reg_end; |
| int i; |
| |
| show_polarities(dev, "Before"); |
| |
| reg_start = start / IRQS_PER_IPC; |
| reg_end = (end + IRQS_PER_IPC - 1) / IRQS_PER_IPC; |
| |
| for (i = reg_start; i < reg_end; i++) { |
| u32 mask; |
| u16 reg; |
| int irq_start; |
| int irq_end; |
| |
| irq_start = i * IRQS_PER_IPC; |
| irq_end = min(irq_start + IRQS_PER_IPC - 1, ITSS_MAX_IRQ); |
| |
| if (start > irq_end) |
| continue; |
| if (end < irq_start) |
| break; |
| |
| /* Track bits within the bounds of of the register */ |
| irq_start = max(start, irq_start) % IRQS_PER_IPC; |
| irq_end = min(end, irq_end) % IRQS_PER_IPC; |
| |
| /* Create bitmask of the inclusive range of start and end */ |
| mask = (((1U << irq_end) - 1) | (1U << irq_end)); |
| mask &= ~((1U << irq_start) - 1); |
| |
| reg = PCR_ITSS_IPC0_CONF + sizeof(u32) * i; |
| pcr_clrsetbits32(dev, reg, mask, mask & priv->irq_snapshot[i]); |
| } |
| |
| show_polarities(dev, "After"); |
| |
| return 0; |
| } |
| #endif |
| |
| static int apl_route_pmc_gpio_gpe(struct udevice *dev, uint pmc_gpe_num) |
| { |
| struct apl_itss_priv *priv = dev_get_priv(dev); |
| struct pmc_route *route; |
| int i; |
| |
| for (i = 0, route = priv->route; i < priv->route_count; i++, route++) { |
| if (pmc_gpe_num == route->pmc) |
| return route->gpio; |
| } |
| |
| return -ENOENT; |
| } |
| |
| static int apl_itss_ofdata_to_platdata(struct udevice *dev) |
| { |
| struct apl_itss_priv *priv = dev_get_priv(dev); |
| int ret; |
| |
| #if CONFIG_IS_ENABLED(OF_PLATDATA) |
| struct apl_itss_platdata *plat = dev_get_platdata(dev); |
| struct dtd_intel_apl_itss *dtplat = &plat->dtplat; |
| |
| /* |
| * It would be nice to do this in the bind() method, but with |
| * of-platdata binding happens in the order that DM finds things in the |
| * linker list (i.e. alphabetical order by driver name). So the GPIO |
| * device may well be bound before its parent (p2sb), and this call |
| * will fail if p2sb is not bound yet. |
| * |
| * TODO(sjg@chromium.org): Add a parent pointer to child devices in dtoc |
| */ |
| ret = p2sb_set_port_id(dev, dtplat->intel_p2sb_port_id); |
| if (ret) |
| return log_msg_ret("Could not set port id", ret); |
| priv->route = (struct pmc_route *)dtplat->intel_pmc_routes; |
| priv->route_count = ARRAY_SIZE(dtplat->intel_pmc_routes) / |
| sizeof(struct pmc_route); |
| #else |
| int size; |
| |
| size = dev_read_size(dev, "intel,pmc-routes"); |
| if (size < 0) |
| return size; |
| priv->route = malloc(size); |
| if (!priv->route) |
| return -ENOMEM; |
| ret = dev_read_u32_array(dev, "intel,pmc-routes", (u32 *)priv->route, |
| size / sizeof(fdt32_t)); |
| if (ret) |
| return log_msg_ret("Cannot read pmc-routes", ret); |
| priv->route_count = size / sizeof(struct pmc_route); |
| #endif |
| |
| return 0; |
| } |
| |
| static const struct irq_ops apl_itss_ops = { |
| .route_pmc_gpio_gpe = apl_route_pmc_gpio_gpe, |
| .set_polarity = apl_set_polarity, |
| #ifndef CONFIG_TPL_BUILD |
| .snapshot_polarities = apl_snapshot_polarities, |
| .restore_polarities = apl_restore_polarities, |
| #endif |
| }; |
| |
| static const struct udevice_id apl_itss_ids[] = { |
| { .compatible = "intel,apl-itss"}, |
| { } |
| }; |
| |
| U_BOOT_DRIVER(apl_itss_drv) = { |
| .name = "intel_apl_itss", |
| .id = UCLASS_IRQ, |
| .of_match = apl_itss_ids, |
| .ops = &apl_itss_ops, |
| .ofdata_to_platdata = apl_itss_ofdata_to_platdata, |
| .platdata_auto_alloc_size = sizeof(struct apl_itss_platdata), |
| .priv_auto_alloc_size = sizeof(struct apl_itss_priv), |
| }; |