board: atmel: add sama5d2_ptc_ek board
Add the SAMA5D2 PTC EK board and remove the SAMA5D2 PTC ENGI board
which was a prototype.
Signed-off-by: Ludovic Desroches <ludovic.desroches@microchip.com>
Signed-off-by: Wenyou Yang <wenyou.yang@microchip.com>
diff --git a/board/atmel/sama5d2_ptc/MAINTAINERS b/board/atmel/sama5d2_ptc/MAINTAINERS
deleted file mode 100644
index 7ab03d6..0000000
--- a/board/atmel/sama5d2_ptc/MAINTAINERS
+++ /dev/null
@@ -1,7 +0,0 @@
-SAMA5D2 PTC Engineering BOARD
-M: Wenyou Yang <wenyou.yang@atmel.com>
-S: Maintained
-F: board/atmel/sama5d2_ptc/
-F: include/configs/sama5d2_ptc.h
-F: configs/sama5d2_ptc_spiflash_defconfig
-F: configs/sama5d2_ptc_nandflash_defconfig
diff --git a/board/atmel/sama5d2_ptc/Makefile b/board/atmel/sama5d2_ptc/Makefile
deleted file mode 100644
index 1fe0392..0000000
--- a/board/atmel/sama5d2_ptc/Makefile
+++ /dev/null
@@ -1,8 +0,0 @@
-#
-# Copyright (C) 2016 Atmel
-# Wenyou Yang <wenyou.yang@atmel.com>
-#
-# SPDX-License-Identifier: GPL-2.0+
-#
-
-obj-y += sama5d2_ptc.o
diff --git a/board/atmel/sama5d2_ptc/sama5d2_ptc.c b/board/atmel/sama5d2_ptc/sama5d2_ptc.c
deleted file mode 100644
index c441e69..0000000
--- a/board/atmel/sama5d2_ptc/sama5d2_ptc.c
+++ /dev/null
@@ -1,285 +0,0 @@
-/*
- * Copyright (C) 2016 Atmel
- * Wenyou.Yang <wenyou.yang@atmel.com>
- *
- * SPDX-License-Identifier: GPL-2.0+
- */
-
-#include <common.h>
-#include <atmel_hlcdc.h>
-#include <lcd.h>
-#include <mmc.h>
-#include <net.h>
-#include <netdev.h>
-#include <spi.h>
-#include <version.h>
-#include <asm/io.h>
-#include <asm/arch/at91_common.h>
-#include <asm/arch/atmel_pio4.h>
-#include <asm/arch/atmel_mpddrc.h>
-#include <asm/arch/atmel_usba_udc.h>
-#include <asm/arch/atmel_sdhci.h>
-#include <asm/arch/clk.h>
-#include <asm/arch/gpio.h>
-#include <asm/arch/sama5_sfr.h>
-#include <asm/arch/sama5d2.h>
-#include <asm/arch/sama5d3_smc.h>
-
-DECLARE_GLOBAL_DATA_PTR;
-
-int spi_cs_is_valid(unsigned int bus, unsigned int cs)
-{
- return bus == 0 && cs == 0;
-}
-
-void spi_cs_activate(struct spi_slave *slave)
-{
- atmel_pio4_set_pio_output(AT91_PIO_PORTA, 17, 0);
-}
-
-void spi_cs_deactivate(struct spi_slave *slave)
-{
- atmel_pio4_set_pio_output(AT91_PIO_PORTA, 17, 1);
-}
-
-static void board_spi0_hw_init(void)
-{
- atmel_pio4_set_a_periph(AT91_PIO_PORTA, 14, 0);
- atmel_pio4_set_a_periph(AT91_PIO_PORTA, 15, 0);
- atmel_pio4_set_a_periph(AT91_PIO_PORTA, 16, 0);
-
- atmel_pio4_set_pio_output(AT91_PIO_PORTA, 17, 1);
-
- at91_periph_clk_enable(ATMEL_ID_SPI0);
-}
-
-static void board_nand_hw_init(void)
-{
- struct at91_smc *smc = (struct at91_smc *)ATMEL_BASE_SMC;
- struct atmel_sfr *sfr = (struct atmel_sfr *)ATMEL_BASE_SFR;
-
- at91_periph_clk_enable(ATMEL_ID_HSMC);
-
- writel(AT91_SFR_EBICFG_DRIVE0_HIGH |
- AT91_SFR_EBICFG_PULL0_NONE |
- AT91_SFR_EBICFG_DRIVE1_HIGH |
- AT91_SFR_EBICFG_PULL1_NONE, &sfr->ebicfg);
-
- /* Configure SMC CS3 for NAND */
- writel(AT91_SMC_SETUP_NWE(1) | AT91_SMC_SETUP_NCS_WR(1) |
- AT91_SMC_SETUP_NRD(1) | AT91_SMC_SETUP_NCS_RD(1),
- &smc->cs[3].setup);
- writel(AT91_SMC_PULSE_NWE(2) | AT91_SMC_PULSE_NCS_WR(3) |
- AT91_SMC_PULSE_NRD(2) | AT91_SMC_PULSE_NCS_RD(3),
- &smc->cs[3].pulse);
- writel(AT91_SMC_CYCLE_NWE(5) | AT91_SMC_CYCLE_NRD(5),
- &smc->cs[3].cycle);
- writel(AT91_SMC_TIMINGS_TCLR(2) | AT91_SMC_TIMINGS_TADL(7) |
- AT91_SMC_TIMINGS_TAR(2) | AT91_SMC_TIMINGS_TRR(3) |
- AT91_SMC_TIMINGS_TWB(7) | AT91_SMC_TIMINGS_RBNSEL(3) |
- AT91_SMC_TIMINGS_NFSEL(1), &smc->cs[3].timings);
- writel(AT91_SMC_MODE_RM_NRD | AT91_SMC_MODE_WM_NWE |
- AT91_SMC_MODE_EXNW_DISABLE |
- AT91_SMC_MODE_DBW_8 |
- AT91_SMC_MODE_TDF_CYCLE(3),
- &smc->cs[3].mode);
-
- atmel_pio4_set_f_periph(AT91_PIO_PORTA, 0, 0); /* D0 */
- atmel_pio4_set_f_periph(AT91_PIO_PORTA, 1, 0); /* D1 */
- atmel_pio4_set_f_periph(AT91_PIO_PORTA, 2, 0); /* D2 */
- atmel_pio4_set_f_periph(AT91_PIO_PORTA, 3, 0); /* D3 */
- atmel_pio4_set_f_periph(AT91_PIO_PORTA, 4, 0); /* D4 */
- atmel_pio4_set_f_periph(AT91_PIO_PORTA, 5, 0); /* D5 */
- atmel_pio4_set_f_periph(AT91_PIO_PORTA, 6, 0); /* D6 */
- atmel_pio4_set_f_periph(AT91_PIO_PORTA, 7, 0); /* D7 */
- atmel_pio4_set_f_periph(AT91_PIO_PORTA, 12, 0); /* RE */
- atmel_pio4_set_f_periph(AT91_PIO_PORTA, 8, 0); /* WE */
- atmel_pio4_set_f_periph(AT91_PIO_PORTA, 9, 1); /* NCS */
- atmel_pio4_set_f_periph(AT91_PIO_PORTA, 21, 1); /* RDY */
- atmel_pio4_set_f_periph(AT91_PIO_PORTA, 10, 1); /* ALE */
- atmel_pio4_set_f_periph(AT91_PIO_PORTA, 11, 1); /* CLE */
-}
-
-static void board_usb_hw_init(void)
-{
- atmel_pio4_set_pio_output(AT91_PIO_PORTA, 28, 1);
-}
-
-static void board_gmac_hw_init(void)
-{
- atmel_pio4_set_f_periph(AT91_PIO_PORTB, 14, 0); /* GTXCK */
- atmel_pio4_set_f_periph(AT91_PIO_PORTB, 15, 0); /* GTXEN */
- atmel_pio4_set_f_periph(AT91_PIO_PORTB, 16, 0); /* GRXDV */
- atmel_pio4_set_f_periph(AT91_PIO_PORTB, 17, 0); /* GRXER */
- atmel_pio4_set_f_periph(AT91_PIO_PORTB, 18, 0); /* GRX0 */
- atmel_pio4_set_f_periph(AT91_PIO_PORTB, 19, 0); /* GRX1 */
- atmel_pio4_set_f_periph(AT91_PIO_PORTB, 20, 0); /* GTX0 */
- atmel_pio4_set_f_periph(AT91_PIO_PORTB, 21, 0); /* GTX1 */
- atmel_pio4_set_f_periph(AT91_PIO_PORTB, 22, 0); /* GMDC */
- atmel_pio4_set_f_periph(AT91_PIO_PORTB, 23, 0); /* GMDIO */
-
- at91_periph_clk_enable(ATMEL_ID_GMAC);
-}
-
-static void board_uart0_hw_init(void)
-{
- atmel_pio4_set_c_periph(AT91_PIO_PORTB, 26, 1); /* URXD0 */
- atmel_pio4_set_c_periph(AT91_PIO_PORTB, 27, 0); /* UTXD0 */
-
- at91_periph_clk_enable(CONFIG_USART_ID);
-}
-
-int board_early_init_f(void)
-{
- at91_periph_clk_enable(ATMEL_ID_PIOA);
- at91_periph_clk_enable(ATMEL_ID_PIOB);
- at91_periph_clk_enable(ATMEL_ID_PIOC);
- at91_periph_clk_enable(ATMEL_ID_PIOD);
-
- board_uart0_hw_init();
-
- return 0;
-}
-
-int board_init(void)
-{
- /* address of boot parameters */
- gd->bd->bi_boot_params = CONFIG_SYS_SDRAM_BASE + 0x100;
-
-#ifdef CONFIG_ATMEL_SPI
- board_spi0_hw_init();
-#endif
-#ifdef CONFIG_NAND_ATMEL
- board_nand_hw_init();
-#endif
-#ifdef CONFIG_MACB
- board_gmac_hw_init();
-#endif
-#ifdef CONFIG_CMD_USB
- board_usb_hw_init();
-#endif
-#ifdef CONFIG_USB_GADGET_ATMEL_USBA
- at91_udp_hw_init();
-#endif
-
- return 0;
-}
-
-int dram_init(void)
-{
- gd->ram_size = get_ram_size((void *)CONFIG_SYS_SDRAM_BASE,
- CONFIG_SYS_SDRAM_SIZE);
- return 0;
-}
-
-int board_eth_init(bd_t *bis)
-{
- int rc = 0;
-
-#ifdef CONFIG_MACB
- rc = macb_eth_initialize(0, (void *)ATMEL_BASE_GMAC, 0x00);
- if (rc)
- printf("GMAC register failed\n");
-#endif
-
-#ifdef CONFIG_USB_GADGET_ATMEL_USBA
- usba_udc_probe(&pdata);
-#ifdef CONFIG_USB_ETH_RNDIS
- usb_eth_initialize(bis);
-#endif
-#endif
-
- return rc;
-}
-
-/* SPL */
-#ifdef CONFIG_SPL_BUILD
-void spl_board_init(void)
-{
-#ifdef CONFIG_SPI_BOOT
- board_spi0_hw_init();
-#endif
-
-#ifdef CONFIG_NAND_BOOT
- board_nand_hw_init();
-#endif
-}
-
-static void ddrc_conf(struct atmel_mpddrc_config *ddrc)
-{
- ddrc->md = (ATMEL_MPDDRC_MD_DBW_32_BITS | ATMEL_MPDDRC_MD_DDR3_SDRAM);
-
- ddrc->cr = (ATMEL_MPDDRC_CR_NC_COL_10 |
- ATMEL_MPDDRC_CR_NR_ROW_14 |
- ATMEL_MPDDRC_CR_CAS_DDR_CAS5 |
- ATMEL_MPDDRC_CR_DIC_DS |
- ATMEL_MPDDRC_CR_DIS_DLL |
- ATMEL_MPDDRC_CR_NB_8BANKS |
- ATMEL_MPDDRC_CR_DECOD_INTERLEAVED |
- ATMEL_MPDDRC_CR_UNAL_SUPPORTED);
-
- ddrc->rtr = 0x511;
-
- ddrc->tpr0 = ((6 << ATMEL_MPDDRC_TPR0_TRAS_OFFSET) |
- (3 << ATMEL_MPDDRC_TPR0_TRCD_OFFSET) |
- (4 << ATMEL_MPDDRC_TPR0_TWR_OFFSET) |
- (9 << ATMEL_MPDDRC_TPR0_TRC_OFFSET) |
- (3 << ATMEL_MPDDRC_TPR0_TRP_OFFSET) |
- (4 << ATMEL_MPDDRC_TPR0_TRRD_OFFSET) |
- (4 << ATMEL_MPDDRC_TPR0_TWTR_OFFSET) |
- (4 << ATMEL_MPDDRC_TPR0_TMRD_OFFSET));
-
- ddrc->tpr1 = ((27 << ATMEL_MPDDRC_TPR1_TRFC_OFFSET) |
- (29 << ATMEL_MPDDRC_TPR1_TXSNR_OFFSET) |
- (0 << ATMEL_MPDDRC_TPR1_TXSRD_OFFSET) |
- (3 << ATMEL_MPDDRC_TPR1_TXP_OFFSET));
-
- ddrc->tpr2 = ((0 << ATMEL_MPDDRC_TPR2_TXARD_OFFSET) |
- (0 << ATMEL_MPDDRC_TPR2_TXARDS_OFFSET) |
- (0 << ATMEL_MPDDRC_TPR2_TRPA_OFFSET) |
- (4 << ATMEL_MPDDRC_TPR2_TRTP_OFFSET) |
- (7 << ATMEL_MPDDRC_TPR2_TFAW_OFFSET));
-}
-
-void mem_init(void)
-{
- struct atmel_mpddr *mpddrc = (struct atmel_mpddr *)ATMEL_BASE_MPDDRC;
- struct atmel_mpddrc_config ddrc_config;
- u32 reg;
-
- ddrc_conf(&ddrc_config);
-
- at91_periph_clk_enable(ATMEL_ID_MPDDRC);
- at91_system_clk_enable(AT91_PMC_DDR);
-
- reg = readl(&mpddrc->io_calibr);
- reg &= ~ATMEL_MPDDRC_IO_CALIBR_RDIV;
- reg |= ATMEL_MPDDRC_IO_CALIBR_DDR3_RZQ_55;
- reg &= ~ATMEL_MPDDRC_IO_CALIBR_TZQIO;
- reg |= ATMEL_MPDDRC_IO_CALIBR_TZQIO_(100);
- writel(reg, &mpddrc->io_calibr);
-
- writel(ATMEL_MPDDRC_RD_DATA_PATH_SHIFT_TWO_CYCLE,
- &mpddrc->rd_data_path);
-
- ddr3_init(ATMEL_BASE_MPDDRC, ATMEL_BASE_DDRCS, &ddrc_config);
-
- writel(0x3, &mpddrc->cal_mr4);
- writel(64, &mpddrc->tim_cal);
-}
-
-void at91_pmc_init(void)
-{
- at91_plla_init(AT91_PMC_PLLAR_29 |
- AT91_PMC_PLLXR_PLLCOUNT(0x3f) |
- AT91_PMC_PLLXR_MUL(82) |
- AT91_PMC_PLLXR_DIV(1));
-
- at91_pllicpr_init(0);
-
- at91_mck_init(AT91_PMC_MCKR_H32MXDIV |
- AT91_PMC_MCKR_PLLADIV_2 |
- AT91_PMC_MCKR_MDIV_3 |
- AT91_PMC_MCKR_CSS_PLLA);
-}
-#endif
diff --git a/board/atmel/sama5d2_ptc/Kconfig b/board/atmel/sama5d2_ptc_ek/Kconfig
similarity index 60%
rename from board/atmel/sama5d2_ptc/Kconfig
rename to board/atmel/sama5d2_ptc_ek/Kconfig
index d2661c6..8b202d6 100644
--- a/board/atmel/sama5d2_ptc/Kconfig
+++ b/board/atmel/sama5d2_ptc_ek/Kconfig
@@ -1,7 +1,7 @@
-if TARGET_SAMA5D2_PTC
+if TARGET_SAMA5D2_PTC_EK
config SYS_BOARD
- default "sama5d2_ptc"
+ default "sama5d2_ptc_ek"
config SYS_VENDOR
default "atmel"
@@ -10,6 +10,6 @@
default "at91"
config SYS_CONFIG_NAME
- default "sama5d2_ptc"
+ default "sama5d2_ptc_ek"
endif
diff --git a/board/atmel/sama5d2_ptc_ek/MAINTAINERS b/board/atmel/sama5d2_ptc_ek/MAINTAINERS
new file mode 100644
index 0000000..3c7b7f5
--- /dev/null
+++ b/board/atmel/sama5d2_ptc_ek/MAINTAINERS
@@ -0,0 +1,8 @@
+SAMA5D2 PTC EK BOARD
+M: Wenyou Yang <wenyou.yang@microchip.com>
+M: Ludovic Desroches <ludovic.desroches@microchip.com>
+S: Maintained
+F: board/atmel/sama5d2_ptc_ek/
+F: include/configs/sama5d2_ptc_ek.h
+F: configs/sama5d2_ptc_ek_mmc_defconfig
+F: configs/sama5d2_ptc_ek_nandflash_defconfig
diff --git a/board/atmel/sama5d2_ptc_ek/Makefile b/board/atmel/sama5d2_ptc_ek/Makefile
new file mode 100644
index 0000000..9fe4b41
--- /dev/null
+++ b/board/atmel/sama5d2_ptc_ek/Makefile
@@ -0,0 +1,8 @@
+#
+# Copyright (C) 2017 Microchip Corporation
+# Wenyou Yang <wenyou.yang@microchip.com>
+#
+# SPDX-License-Identifier: GPL-2.0+
+#
+
+obj-y += sama5d2_ptc_ek.o
diff --git a/board/atmel/sama5d2_ptc_ek/sama5d2_ptc_ek.c b/board/atmel/sama5d2_ptc_ek/sama5d2_ptc_ek.c
new file mode 100644
index 0000000..4c2e209
--- /dev/null
+++ b/board/atmel/sama5d2_ptc_ek/sama5d2_ptc_ek.c
@@ -0,0 +1,130 @@
+/*
+ * Copyright (C) 2017 Microchip Corporation
+ * Wenyou Yang <wenyou.yang@microchip.com>
+ *
+ * SPDX-License-Identifier: GPL-2.0+
+ */
+
+#include <common.h>
+#include <debug_uart.h>
+#include <dm.h>
+#include <i2c.h>
+#include <nand.h>
+#include <version.h>
+#include <asm/io.h>
+#include <asm/arch/at91_common.h>
+#include <asm/arch/atmel_pio4.h>
+#include <asm/arch/atmel_mpddrc.h>
+#include <asm/arch/atmel_sdhci.h>
+#include <asm/arch/clk.h>
+#include <asm/arch/gpio.h>
+#include <asm/arch/sama5d2.h>
+#include <asm/arch/sama5d2_smc.h>
+
+DECLARE_GLOBAL_DATA_PTR;
+
+#ifdef CONFIG_NAND_ATMEL
+static void board_nand_hw_init(void)
+{
+ struct at91_smc *smc = (struct at91_smc *)ATMEL_BASE_SMC;
+
+ at91_periph_clk_enable(ATMEL_ID_HSMC);
+
+ /* Configure SMC CS3 for NAND */
+ writel(AT91_SMC_SETUP_NWE(1) | AT91_SMC_SETUP_NCS_WR(1) |
+ AT91_SMC_SETUP_NRD(1) | AT91_SMC_SETUP_NCS_RD(1),
+ &smc->cs[3].setup);
+ writel(AT91_SMC_PULSE_NWE(2) | AT91_SMC_PULSE_NCS_WR(3) |
+ AT91_SMC_PULSE_NRD(2) | AT91_SMC_PULSE_NCS_RD(3),
+ &smc->cs[3].pulse);
+ writel(AT91_SMC_CYCLE_NWE(5) | AT91_SMC_CYCLE_NRD(5),
+ &smc->cs[3].cycle);
+ writel(AT91_SMC_TIMINGS_TCLR(2) | AT91_SMC_TIMINGS_TADL(7) |
+ AT91_SMC_TIMINGS_TAR(2) | AT91_SMC_TIMINGS_TRR(3) |
+ AT91_SMC_TIMINGS_TWB(7) | AT91_SMC_TIMINGS_RBNSEL(3) |
+ AT91_SMC_TIMINGS_NFSEL(1), &smc->cs[3].timings);
+ writel(AT91_SMC_MODE_RM_NRD | AT91_SMC_MODE_WM_NWE |
+ AT91_SMC_MODE_EXNW_DISABLE |
+ AT91_SMC_MODE_DBW_8 |
+ AT91_SMC_MODE_TDF_CYCLE(3),
+ &smc->cs[3].mode);
+
+ atmel_pio4_set_b_periph(AT91_PIO_PORTA, 22, 0); /* D0 */
+ atmel_pio4_set_b_periph(AT91_PIO_PORTA, 23, 0); /* D1 */
+ atmel_pio4_set_b_periph(AT91_PIO_PORTA, 24, 0); /* D2 */
+ atmel_pio4_set_b_periph(AT91_PIO_PORTA, 25, 0); /* D3 */
+ atmel_pio4_set_b_periph(AT91_PIO_PORTA, 26, 0); /* D4 */
+ atmel_pio4_set_b_periph(AT91_PIO_PORTA, 27, 0); /* D5 */
+ atmel_pio4_set_b_periph(AT91_PIO_PORTA, 28, 0); /* D6 */
+ atmel_pio4_set_b_periph(AT91_PIO_PORTA, 29, 0); /* D7 */
+ atmel_pio4_set_b_periph(AT91_PIO_PORTB, 2, 0); /* RE */
+ atmel_pio4_set_b_periph(AT91_PIO_PORTA, 30, 0); /* WE */
+ atmel_pio4_set_b_periph(AT91_PIO_PORTA, 31, 1); /* NCS */
+ atmel_pio4_set_b_periph(AT91_PIO_PORTC, 8, 1); /* RDY */
+ atmel_pio4_set_b_periph(AT91_PIO_PORTB, 0, 1); /* ALE */
+ atmel_pio4_set_b_periph(AT91_PIO_PORTB, 1, 1); /* CLE */
+}
+#endif
+
+static void board_usb_hw_init(void)
+{
+ atmel_pio4_set_pio_output(AT91_PIO_PORTB, 12, 1);
+}
+
+#ifdef CONFIG_DEBUG_UART_BOARD_INIT
+static void board_uart0_hw_init(void)
+{
+ atmel_pio4_set_c_periph(AT91_PIO_PORTB, 26, 1); /* URXD0 */
+ atmel_pio4_set_c_periph(AT91_PIO_PORTB, 27, 0); /* UTXD0 */
+
+ at91_periph_clk_enable(ATMEL_ID_UART0);
+}
+
+void board_debug_uart_init(void)
+{
+ board_uart0_hw_init();
+}
+#endif
+
+#ifdef CONFIG_BOARD_EARLY_INIT_F
+int board_early_init_f(void)
+{
+#ifdef CONFIG_DEBUG_UART
+ debug_uart_init();
+#endif
+ return 0;
+}
+#endif
+
+int board_init(void)
+{
+ /* address of boot parameters */
+ gd->bd->bi_boot_params = CONFIG_SYS_SDRAM_BASE + 0x100;
+
+#ifdef CONFIG_NAND_ATMEL
+ board_nand_hw_init();
+#endif
+#ifdef CONFIG_CMD_USB
+ board_usb_hw_init();
+#endif
+ return 0;
+}
+
+int dram_init(void)
+{
+ gd->ram_size = get_ram_size((void *)CONFIG_SYS_SDRAM_BASE,
+ CONFIG_SYS_SDRAM_SIZE);
+ return 0;
+}
+
+#define AT24MAC_MAC_OFFSET 0xfa
+
+#ifdef CONFIG_MISC_INIT_R
+int misc_init_r(void)
+{
+#ifdef CONFIG_I2C_EEPROM
+ at91_set_ethaddr(AT24MAC_MAC_OFFSET);
+#endif
+ return 0;
+}
+#endif