diff --git a/arch/arm/cpu/armv8/fsl-layerscape/Makefile b/arch/arm/cpu/armv8/fsl-layerscape/Makefile
index 6fa08c8..1beb426 100644
--- a/arch/arm/cpu/armv8/fsl-layerscape/Makefile
+++ b/arch/arm/cpu/armv8/fsl-layerscape/Makefile
@@ -21,8 +21,8 @@
 endif
 endif
 
-ifneq ($(CONFIG_LS2085A),)
-obj-$(CONFIG_SYS_HAS_SERDES) += ls2085a_serdes.o
+ifneq ($(CONFIG_LS2080A),)
+obj-$(CONFIG_SYS_HAS_SERDES) += ls2080a_serdes.o
 else
 ifneq ($(CONFIG_LS1043A),)
 obj-$(CONFIG_SYS_HAS_SERDES) += ls1043a_serdes.o
diff --git a/arch/arm/cpu/armv8/fsl-layerscape/README.lsch3 b/arch/arm/cpu/armv8/fsl-layerscape/README.lsch3
index 417cf6d..db9359d 100644
--- a/arch/arm/cpu/armv8/fsl-layerscape/README.lsch3
+++ b/arch/arm/cpu/armv8/fsl-layerscape/README.lsch3
@@ -7,7 +7,7 @@
 Freescale LayerScape with Chassis Generation 3
 
 This architecture supports Freescale ARMv8 SoCs with Chassis generation 3,
-for example LS2085A.
+for example LS2080A.
 
 DDR Layout
 ============
@@ -152,7 +152,7 @@
 nand write <rcw image in memory> 0 <size of rcw image>
 
 To form the NAND image, build u-boot with NAND config, for example,
-ls2085aqds_nand_defconfig. The image needed is u-boot-with-spl.bin.
+ls2080aqds_nand_defconfig. The image needed is u-boot-with-spl.bin.
 The u-boot image should be written to match SRC_ADDR, in above example 0x20000.
 
 nand write <u-boot image in memory> 200000 <size of u-boot image>
diff --git a/arch/arm/cpu/armv8/fsl-layerscape/cpu.c b/arch/arm/cpu/armv8/fsl-layerscape/cpu.c
index 0cb0afa..c6e00b8 100644
--- a/arch/arm/cpu/armv8/fsl-layerscape/cpu.c
+++ b/arch/arm/cpu/armv8/fsl-layerscape/cpu.c
@@ -438,7 +438,7 @@
 #ifdef CONFIG_SYS_DPAA_FMAN
 	printf("  FMAN:     %-4s MHz", strmhz(buf, sysinfo.freq_fman[0]));
 #endif
-#ifdef CONFIG_FSL_LSCH3
+#ifdef CONFIG_SYS_FSL_HAS_DP_DDR
 	printf("     DP-DDR:   %-4s MT/s", strmhz(buf, sysinfo.freq_ddrbus2));
 #endif
 	puts("\n");
diff --git a/arch/arm/cpu/armv8/fsl-layerscape/fdt.c b/arch/arm/cpu/armv8/fsl-layerscape/fdt.c
index 47599c1..eafdd71 100644
--- a/arch/arm/cpu/armv8/fsl-layerscape/fdt.c
+++ b/arch/arm/cpu/armv8/fsl-layerscape/fdt.c
@@ -141,7 +141,7 @@
 
 /*
  * The info below summarizes how streamID partitioning works
- * for ls2085a and how it is conveyed to the OS via the device tree.
+ * for ls2080a and how it is conveyed to the OS via the device tree.
  *
  *  -non-PCI legacy, platform devices (USB, SD/MMC, SATA, DMA)
  *     -all legacy devices get a unique ICID assigned and programmed in
diff --git a/arch/arm/cpu/armv8/fsl-layerscape/fsl_lsch3_speed.c b/arch/arm/cpu/armv8/fsl-layerscape/fsl_lsch3_speed.c
index 4054c3c..81cf470 100644
--- a/arch/arm/cpu/armv8/fsl-layerscape/fsl_lsch3_speed.c
+++ b/arch/arm/cpu/armv8/fsl-layerscape/fsl_lsch3_speed.c
@@ -11,6 +11,7 @@
 #include <fsl_ifc.h>
 #include <asm/processor.h>
 #include <asm/io.h>
+#include <asm/arch-fsl-layerscape/immap_lsch3.h>
 #include <asm/arch/clock.h>
 #include <asm/arch/soc.h>
 #include "cpu.h"
@@ -77,11 +78,15 @@
 	sys_info->freq_systembus = sysclk;
 #ifdef CONFIG_DDR_CLK_FREQ
 	sys_info->freq_ddrbus = CONFIG_DDR_CLK_FREQ;
+#ifdef CONFIG_SYS_FSL_HAS_DP_DDR
 	sys_info->freq_ddrbus2 = CONFIG_DDR_CLK_FREQ;
+#endif
 #else
 	sys_info->freq_ddrbus = sysclk;
+#ifdef CONFIG_SYS_FSL_HAS_DP_DDR
 	sys_info->freq_ddrbus2 = sysclk;
 #endif
+#endif
 
 	sys_info->freq_systembus *= (gur_in32(&gur->rcwsr[0]) >>
 			FSL_CHASSIS3_RCWSR0_SYS_PLL_RAT_SHIFT) &
@@ -91,9 +96,11 @@
 	sys_info->freq_ddrbus *= (gur_in32(&gur->rcwsr[0]) >>
 			FSL_CHASSIS3_RCWSR0_MEM_PLL_RAT_SHIFT) &
 			FSL_CHASSIS3_RCWSR0_MEM_PLL_RAT_MASK;
+#ifdef CONFIG_SYS_FSL_HAS_DP_DDR
 	sys_info->freq_ddrbus2 *= (gur_in32(&gur->rcwsr[0]) >>
 			FSL_CHASSIS3_RCWSR0_MEM2_PLL_RAT_SHIFT) &
 			FSL_CHASSIS3_RCWSR0_MEM2_PLL_RAT_MASK;
+#endif
 
 	for (i = 0; i < CONFIG_SYS_FSL_NUM_CC_PLLS; i++) {
 		/*
@@ -133,7 +140,9 @@
 	gd->cpu_clk = sys_info.freq_processor[0];
 	gd->bus_clk = sys_info.freq_systembus;
 	gd->mem_clk = sys_info.freq_ddrbus;
+#ifdef CONFIG_SYS_FSL_HAS_DP_DDR
 	gd->arch.mem2_clk = sys_info.freq_ddrbus2;
+#endif
 #if defined(CONFIG_FSL_ESDHC)
 	gd->arch.sdhc_clk = gd->bus_clk / 2;
 #endif /* defined(CONFIG_FSL_ESDHC) */
@@ -169,8 +178,10 @@
 	 * DDR controller 0 & 1 are on memory complex 0
 	 * DDR controler 2 is on memory complext 1
 	 */
+#ifdef CONFIG_SYS_FSL_HAS_DP_DDR
 	if (ctrl_num >= 2)
 		return gd->arch.mem2_clk;
+#endif
 
 	return gd->mem_clk;
 }
diff --git a/arch/arm/cpu/armv8/fsl-layerscape/ls2085a_serdes.c b/arch/arm/cpu/armv8/fsl-layerscape/ls2080a_serdes.c
similarity index 100%
rename from arch/arm/cpu/armv8/fsl-layerscape/ls2085a_serdes.c
rename to arch/arm/cpu/armv8/fsl-layerscape/ls2080a_serdes.c
diff --git a/arch/arm/cpu/armv8/fsl-layerscape/soc.c b/arch/arm/cpu/armv8/fsl-layerscape/soc.c
index 637853d..b02e28a 100644
--- a/arch/arm/cpu/armv8/fsl-layerscape/soc.c
+++ b/arch/arm/cpu/armv8/fsl-layerscape/soc.c
@@ -12,7 +12,7 @@
 
 DECLARE_GLOBAL_DATA_PTR;
 
-#ifdef CONFIG_LS2085A
+#ifdef CONFIG_LS2080A
 static void erratum_a008751(void)
 {
 #ifdef CONFIG_SYS_FSL_ERRATUM_A008751
diff --git a/arch/arm/cpu/armv8/fsl-layerscape/spl.c b/arch/arm/cpu/armv8/fsl-layerscape/spl.c
index ba551aa..a3410af 100644
--- a/arch/arm/cpu/armv8/fsl-layerscape/spl.c
+++ b/arch/arm/cpu/armv8/fsl-layerscape/spl.c
@@ -48,7 +48,7 @@
 	gd = &gdata;
 	/* Clear global data */
 	memset((void *)gd, 0, sizeof(gd_t));
-#ifdef CONFIG_LS2085A
+#ifdef CONFIG_LS2080A
 	arch_cpu_init();
 #endif
 #ifdef CONFIG_FSL_IFC
@@ -56,7 +56,7 @@
 #endif
 	board_early_init_f();
 	timer_init();
-#ifdef CONFIG_LS2085A
+#ifdef CONFIG_LS2080A
 	env_init();
 #endif
 	get_clocks();