hwmon: Cleaning hwmon devices
Clean Makefile
Move device specific values to driver for better reading
Signed-off-by: Michal Simek <monstr@monstr.eu>
Acked-by: Stefan Roese <sr@denx.de>
diff --git a/drivers/hwmon/adm1021.c b/drivers/hwmon/adm1021.c
index 9f65cfb27..b791ec0 100644
--- a/drivers/hwmon/adm1021.c
+++ b/drivers/hwmon/adm1021.c
@@ -33,11 +33,40 @@
#include <common.h>
-#ifdef CONFIG_DTT_ADM1021
-
#include <i2c.h>
#include <dtt.h>
+#define DTT_READ_LOC_VALUE 0x00
+#define DTT_READ_REM_VALUE 0x01
+#define DTT_READ_STATUS 0x02
+#define DTT_READ_CONFIG 0x03
+#define DTT_READ_CONVRATE 0x04
+#define DTT_READ_LOC_HIGHLIM 0x05
+#define DTT_READ_LOC_LOWLIM 0x06
+#define DTT_READ_REM_HIGHLIM 0x07
+#define DTT_READ_REM_LOWLIM 0x08
+#define DTT_READ_DEVID 0xfe
+
+#define DTT_WRITE_CONFIG 0x09
+#define DTT_WRITE_CONVRATE 0x0a
+#define DTT_WRITE_LOC_HIGHLIM 0x0b
+#define DTT_WRITE_LOC_LOWLIM 0x0c
+#define DTT_WRITE_REM_HIGHLIM 0x0d
+#define DTT_WRITE_REM_LOWLIM 0x0e
+#define DTT_WRITE_ONESHOT 0x0f
+
+#define DTT_STATUS_BUSY 0x80 /* 1=ADC Converting */
+#define DTT_STATUS_LHIGH 0x40 /* 1=Local High Temp Limit Tripped */
+#define DTT_STATUS_LLOW 0x20 /* 1=Local Low Temp Limit Tripped */
+#define DTT_STATUS_RHIGH 0x10 /* 1=Remote High Temp Limit Tripped */
+#define DTT_STATUS_RLOW 0x08 /* 1=Remote Low Temp Limit Tripped */
+#define DTT_STATUS_OPEN 0x04 /* 1=Remote Sensor Open-Circuit */
+
+#define DTT_CONFIG_ALERT_MASKED 0x80 /* 0=ALERT Enabled, 1=ALERT Masked */
+#define DTT_CONFIG_STANDBY 0x40 /* 0=Run, 1=Standby */
+
+#define DTT_ADM1021_DEVID 0x41
+
typedef
struct {
uint i2c_addr:7; /* 7bit i2c chip address */
@@ -170,5 +199,3 @@
return (int) val;
} /* dtt_get_temp() */
-
-#endif /* CONFIG_DTT_ADM1021 */