Merge git://git.denx.de/u-boot-uniphier
- fix sparse warnings
- sync DT with Linux
- add new board support (LD11/LD20 global)
diff --git a/MAINTAINERS b/MAINTAINERS
index 37cefdb..957e27c 100644
--- a/MAINTAINERS
+++ b/MAINTAINERS
@@ -133,6 +133,7 @@
ARM ROCKCHIP
M: Simon Glass <sjg@chromium.org>
+M: Philipp Tomsich <philipp.tomsich@theobroma-systems.com>
S: Maintained
T: git git://git.denx.de/u-boot-rockchip.git
F: arch/arm/mach-rockchip/
diff --git a/api/api_storage.c b/api/api_storage.c
index f858f09..8bed2f3 100644
--- a/api/api_storage.c
+++ b/api/api_storage.c
@@ -43,6 +43,9 @@
static struct stor_spec specs[ENUM_MAX] = { { 0, 0, 0, 0, NULL }, };
+#ifndef CONFIG_SYS_MMC_MAX_DEVICE
+#define CONFIG_SYS_MMC_MAX_DEVICE 1
+#endif
void dev_stor_init(void)
{
diff --git a/arch/arm/dts/am437x-gp-evm-u-boot.dtsi b/arch/arm/dts/am437x-gp-evm-u-boot.dtsi
index 885a9a9..530f549 100644
--- a/arch/arm/dts/am437x-gp-evm-u-boot.dtsi
+++ b/arch/arm/dts/am437x-gp-evm-u-boot.dtsi
@@ -9,30 +9,30 @@
/{
ocp {
- u-boot,dm-pre-reloc;
+ u-boot,dm-spl;
};
};
&uart0 {
- u-boot,dm-pre-reloc;
+ u-boot,dm-spl;
};
&mmc1 {
- u-boot,dm-pre-reloc;
+ u-boot,dm-spl;
};
&mac {
- u-boot,dm-pre-reloc;
+ u-boot,dm-spl;
};
&davinci_mdio {
- u-boot,dm-pre-reloc;
+ u-boot,dm-spl;
};
&cpsw_emac0 {
- u-boot,dm-pre-reloc;
+ u-boot,dm-spl;
};
&phy_sel {
- u-boot,dm-pre-reloc;
+ u-boot,dm-spl;
};
diff --git a/arch/arm/dts/at91sam9g45-corvus.dts b/arch/arm/dts/at91sam9g45-corvus.dts
index c207c02..6367996 100644
--- a/arch/arm/dts/at91sam9g45-corvus.dts
+++ b/arch/arm/dts/at91sam9g45-corvus.dts
@@ -18,6 +18,7 @@
compatible = "atmel,at91sam9m10g45ek", "atmel,at91sam9g45", "atmel,at91sam9";
chosen {
+ u-boot,dm-pre-reloc;
stdout-path = &dbgu;
};
@@ -38,6 +39,7 @@
ahb {
apb {
dbgu: serial@ffffee00 {
+ u-boot,dm-pre-reloc;
status = "okay";
};
diff --git a/arch/arm/dts/omap5-u-boot.dtsi b/arch/arm/dts/omap5-u-boot.dtsi
index 9247314..9f9b4d1 100644
--- a/arch/arm/dts/omap5-u-boot.dtsi
+++ b/arch/arm/dts/omap5-u-boot.dtsi
@@ -9,7 +9,7 @@
/{
ocp {
- u-boot,dm-pre-reloc;
+ u-boot,dm-spl;
ocp2scp@4a090000 {
compatible = "ti,omap-ocp2scp", "simple-bus";
@@ -18,37 +18,37 @@
};
&uart1 {
- u-boot,dm-pre-reloc;
+ u-boot,dm-spl;
};
&uart3 {
- u-boot,dm-pre-reloc;
+ u-boot,dm-spl;
};
&mmc1 {
- u-boot,dm-pre-reloc;
+ u-boot,dm-spl;
};
&mmc2 {
- u-boot,dm-pre-reloc;
+ u-boot,dm-spl;
};
&l4_cfg {
- u-boot,dm-pre-reloc;
+ u-boot,dm-spl;
};
&scm {
- u-boot,dm-pre-reloc;
+ u-boot,dm-spl;
};
&scm_conf {
- u-boot,dm-pre-reloc;
+ u-boot,dm-spl;
};
&qspi {
- u-boot,dm-pre-reloc;
+ u-boot,dm-spl;
m25p80@0 {
- u-boot,dm-pre-reloc;
+ u-boot,dm-spl;
};
};
diff --git a/arch/arm/mach-omap2/boot-common.c b/arch/arm/mach-omap2/boot-common.c
index 29c8f23..b77506d 100644
--- a/arch/arm/mach-omap2/boot-common.c
+++ b/arch/arm/mach-omap2/boot-common.c
@@ -65,6 +65,23 @@
if (boot_device == BOOT_DEVICE_QSPI_4)
boot_device = BOOT_DEVICE_SPI;
#endif
+#ifdef CONFIG_TI816X
+ /*
+ * On PG2.0 and later TI816x the values we get when booting are not the
+ * same as on PG1.0, which is what the defines are based on. Update
+ * them as needed.
+ */
+ if (get_cpu_rev() != 1) {
+ if (boot_device == 0x05) {
+ omap_boot_params->boot_device = BOOT_DEVICE_NAND;
+ boot_device = BOOT_DEVICE_NAND;
+ }
+ if (boot_device == 0x08) {
+ omap_boot_params->boot_device = BOOT_DEVICE_MMC1;
+ boot_device = BOOT_DEVICE_MMC1;
+ }
+ }
+#endif
/*
* When booting from peripheral booting, the boot device is not usable
* as-is (unless there is support for it), so the boot device is instead
diff --git a/board/gdsys/p1022/controlcenterd-id.c b/board/gdsys/p1022/controlcenterd-id.c
index db8a917..95f11fb 100644
--- a/board/gdsys/p1022/controlcenterd-id.c
+++ b/board/gdsys/p1022/controlcenterd-id.c
@@ -142,20 +142,6 @@
#define IS_VAR_HREG(spec) (((spec) & 0x38) == 0x10)
#define HREG_IDX(spec) ((spec) & (IS_PCR_HREG(spec) ? 0x1f : 0x7))
-
-static const uint8_t prg_stage1_prepare[] = {
- 0x00, 0x20, 0x00, 0x00, /* opcode: SYNC f0 */
- 0x00, 0x24, 0x00, 0x00, /* opcode: SYNC f1 */
- 0x01, 0x80, 0x00, 0x00, /* opcode: CHECK0 PCR0 */
- 0x81, 0x22, 0x00, 0x00, /* opcode: LOAD PCR0, f0 */
- 0x01, 0x84, 0x00, 0x00, /* opcode: CHECK0 PCR1 */
- 0x81, 0x26, 0x10, 0x00, /* opcode: LOAD PCR1, f1 */
- 0x01, 0x88, 0x00, 0x00, /* opcode: CHECK0 PCR2 */
- 0x81, 0x2a, 0x20, 0x00, /* opcode: LOAD PCR2, f2 */
- 0x01, 0x8c, 0x00, 0x00, /* opcode: CHECK0 PCR3 */
- 0x81, 0x2e, 0x30, 0x00, /* opcode: LOAD PCR3, f3 */
-};
-
static const uint8_t vendor[] = "Guntermann & Drunck";
/**
@@ -931,6 +917,19 @@
#endif
#if defined(CCDM_FIRST_STAGE) || (defined CCDM_AUTO_FIRST_STAGE)
+static const uint8_t prg_stage1_prepare[] = {
+ 0x00, 0x20, 0x00, 0x00, /* opcode: SYNC f0 */
+ 0x00, 0x24, 0x00, 0x00, /* opcode: SYNC f1 */
+ 0x01, 0x80, 0x00, 0x00, /* opcode: CHECK0 PCR0 */
+ 0x81, 0x22, 0x00, 0x00, /* opcode: LOAD PCR0, f0 */
+ 0x01, 0x84, 0x00, 0x00, /* opcode: CHECK0 PCR1 */
+ 0x81, 0x26, 0x10, 0x00, /* opcode: LOAD PCR1, f1 */
+ 0x01, 0x88, 0x00, 0x00, /* opcode: CHECK0 PCR2 */
+ 0x81, 0x2a, 0x20, 0x00, /* opcode: LOAD PCR2, f2 */
+ 0x01, 0x8c, 0x00, 0x00, /* opcode: CHECK0 PCR3 */
+ 0x81, 0x2e, 0x30, 0x00, /* opcode: LOAD PCR3, f3 */
+};
+
static int first_stage_actions(void)
{
int result = 0;
diff --git a/board/qualcomm/dragonboard410c/u-boot.lds b/board/qualcomm/dragonboard410c/u-boot.lds
index 6e1c5a8..62ac4d7 100644
--- a/board/qualcomm/dragonboard410c/u-boot.lds
+++ b/board/qualcomm/dragonboard410c/u-boot.lds
@@ -43,6 +43,22 @@
. = ALIGN(8);
+ .efi_runtime : {
+ __efi_runtime_start = .;
+ *(efi_runtime_text)
+ *(efi_runtime_data)
+ __efi_runtime_stop = .;
+ }
+
+ .efi_runtime_rel : {
+ __efi_runtime_rel_start = .;
+ *(.relaefi_runtime_text)
+ *(.relaefi_runtime_data)
+ __efi_runtime_rel_stop = .;
+ }
+
+ . = ALIGN(8);
+
.image_copy_end :
{
*(.__image_copy_end)
diff --git a/cmd/bdinfo.c b/cmd/bdinfo.c
index 48dba20..45baa2e 100644
--- a/cmd/bdinfo.c
+++ b/cmd/bdinfo.c
@@ -375,6 +375,8 @@
printf("Early malloc usage: %lx / %x\n", gd->malloc_ptr,
CONFIG_SYS_MALLOC_F_LEN);
#endif
+ if (gd->fdt_blob)
+ printf("fdt_blob = %p\n", gd->fdt_blob);
return 0;
}
diff --git a/configs/corvus_defconfig b/configs/corvus_defconfig
index 36e6608..ac5eefd 100644
--- a/configs/corvus_defconfig
+++ b/configs/corvus_defconfig
@@ -6,6 +6,7 @@
CONFIG_SPL_GPIO_SUPPORT=y
CONFIG_SPL_LIBCOMMON_SUPPORT=y
CONFIG_SPL_LIBGENERIC_SUPPORT=y
+CONFIG_SYS_MALLOC_F_LEN=0x800
CONFIG_SPL_SERIAL_SUPPORT=y
CONFIG_SPL_NAND_SUPPORT=y
CONFIG_DEFAULT_DEVICE_TREE="at91sam9g45-corvus"
@@ -31,8 +32,13 @@
CONFIG_CMD_PING=y
CONFIG_OF_CONTROL=y
CONFIG_OF_EMBED=y
+CONFIG_CLK=y
+CONFIG_CLK_AT91=y
+CONFIG_AT91_UTMI=y
CONFIG_DFU_NAND=y
# CONFIG_MMC is not set
+# CONFIG_SPL_DM_SERIAL is not set
+CONFIG_ATMEL_USART=y
CONFIG_USB=y
CONFIG_USB_EHCI_HCD=y
CONFIG_USB_STORAGE=y
diff --git a/doc/git-mailrc b/doc/git-mailrc
index 33317d1..04c6c8d 100644
--- a/doc/git-mailrc
+++ b/doc/git-mailrc
@@ -40,6 +40,7 @@
alias monstr Michal Simek <monstr@monstr.eu>
alias prafulla Prafulla Wadaskar <prafulla@marvell.com>
alias prom Minkyu Kang <mk7.kang@samsung.com>
+alias ptomsich Philipp Tomsich <philipp.tomsich@theobroma-systems.com>
alias rbohmer Remy Bohmer <linux@bohmer.net>
alias reinhardm Reinhard Meyer <u-boot@emk-elektronik.de>
alias sbabic Stefano Babic <sbabic@denx.de>
@@ -77,7 +78,7 @@
alias ti uboot, trini
alias uniphier uboot, masahiro
alias zynq uboot, monstr
-alias rockchip uboot, sjg, Kever Yang <kever.yang@rock-chips.com>
+alias rockchip uboot, sjg, Kever Yang <kever.yang@rock-chips.com>, ptomsich
alias avr32 uboot, abiessmann
alias bfin uboot, vapier, sonic
diff --git a/drivers/clk/rockchip/clk_rk3036.c b/drivers/clk/rockchip/clk_rk3036.c
index 28652df..5ecf512 100644
--- a/drivers/clk/rockchip/clk_rk3036.c
+++ b/drivers/clk/rockchip/clk_rk3036.c
@@ -40,7 +40,7 @@
#hz "Hz cannot be hit with PLL "\
"divisors on line " __stringify(__LINE__));
-/* use interge mode*/
+/* use integer mode*/
static const struct pll_div apll_init_cfg = PLL_DIVISORS(APLL_HZ, 1, 3, 1);
static const struct pll_div gpll_init_cfg = PLL_DIVISORS(GPLL_HZ, 2, 2, 1);
@@ -61,8 +61,8 @@
assert(vco_hz >= VCO_MIN_HZ && vco_hz <= VCO_MAX_HZ &&
output_hz >= OUTPUT_MIN_HZ && output_hz <= OUTPUT_MAX_HZ);
- /* use interger mode */
- rk_clrreg(&pll->con1, 1 << PLL_DSMPD_SHIFT);
+ /* use integer mode */
+ rk_setreg(&pll->con1, 1 << PLL_DSMPD_SHIFT);
rk_clrsetreg(&pll->con0,
PLL_POSTDIV1_MASK | PLL_FBDIV_MASK,
diff --git a/drivers/clk/rockchip/clk_rv1108.c b/drivers/clk/rockchip/clk_rv1108.c
index 0a3ba3b..818293d 100644
--- a/drivers/clk/rockchip/clk_rv1108.c
+++ b/drivers/clk/rockchip/clk_rv1108.c
@@ -40,9 +40,6 @@
"divisors on line " __stringify(__LINE__));
/* use interge mode*/
-static const struct pll_div apll_init_cfg = PLL_DIVISORS(APLL_HZ, 1, 3, 1);
-static const struct pll_div gpll_init_cfg = PLL_DIVISORS(GPLL_HZ, 2, 2, 1);
-
static inline int rv1108_pll_id(enum rk_clk_id clk_id)
{
int id = 0;
diff --git a/drivers/mtd/onenand/onenand_base.c b/drivers/mtd/onenand/onenand_base.c
index 2e3d0e5..8282f68 100644
--- a/drivers/mtd/onenand/onenand_base.c
+++ b/drivers/mtd/onenand/onenand_base.c
@@ -1919,6 +1919,7 @@
*/
int onenand_block_markbad(struct mtd_info *mtd, loff_t ofs)
{
+ struct onenand_chip *this = mtd->priv;
int ret;
ret = onenand_block_isbad(mtd, ofs);
@@ -1929,7 +1930,10 @@
return ret;
}
- ret = mtd_block_markbad(mtd, ofs);
+ onenand_get_device(mtd, FL_WRITING);
+ ret = this->block_markbad(mtd, ofs);
+ onenand_release_device(mtd);
+
return ret;
}
diff --git a/drivers/mtd/onenand/onenand_spl.c b/drivers/mtd/onenand/onenand_spl.c
index 1925f41..0b78067 100644
--- a/drivers/mtd/onenand/onenand_spl.c
+++ b/drivers/mtd/onenand/onenand_spl.c
@@ -23,11 +23,29 @@
PAGE_4K = 4096,
};
+static unsigned int density_mask;
+
#define ONENAND_PAGES_PER_BLOCK 64
-#define onenand_block_address(block) (block)
#define onenand_sector_address(page) (page << 2)
#define onenand_buffer_address() ((1 << 3) << 8)
-#define onenand_bufferram_address(block) (0)
+
+static inline int onenand_block_address(int block)
+{
+ /* Device Flash Core select, NAND Flash Block Address */
+ if (block & density_mask)
+ return ONENAND_DDP_CHIP1 | (block ^ density_mask);
+
+ return block;
+}
+
+static inline int onenand_bufferram_address(int block)
+{
+ /* Device BufferRAM Select */
+ if (block & density_mask)
+ return ONENAND_DDP_CHIP1;
+
+ return ONENAND_DDP_CHIP0;
+}
static inline uint16_t onenand_readw(uint32_t addr)
{
@@ -41,7 +59,7 @@
static enum onenand_spl_pagesize onenand_spl_get_geometry(void)
{
- uint32_t dev_id, density;
+ unsigned int dev_id, density, size;
if (!onenand_readw(ONENAND_REG_TECHNOLOGY)) {
dev_id = onenand_readw(ONENAND_REG_DEVICE_ID);
@@ -51,8 +69,11 @@
if (density < ONENAND_DEVICE_DENSITY_4Gb)
return PAGE_2K;
- if (dev_id & ONENAND_DEVICE_IS_DDP)
+ if (dev_id & ONENAND_DEVICE_IS_DDP) {
+ size = onenand_readw(ONENAND_REG_DATA_BUFFER_SIZE);
+ density_mask = 1 << (18 + density - ffs(size));
return PAGE_2K;
+ }
}
return PAGE_4K;
@@ -110,9 +131,12 @@
*/
int onenand_spl_read_block(int block, int offset, int len, void *dst)
{
- int page, read, psize;
+ int page, read;
+ static int psize;
+
+ if (!psize)
+ psize = onenand_spl_get_geometry();
- psize = onenand_spl_get_geometry();
/* Calculate the page number */
page = offset / psize;
/* Offset to the start of a flash page */
diff --git a/drivers/serial/Kconfig b/drivers/serial/Kconfig
index 58fc7cd..c64f4a6 100644
--- a/drivers/serial/Kconfig
+++ b/drivers/serial/Kconfig
@@ -65,7 +65,7 @@
defined in include/serial.h.
config SPL_DM_SERIAL
- bool "Enable Driver Model for serial drivers"
+ bool "Enable Driver Model for serial drivers in SPL"
depends on DM_SERIAL
default y if SPL && DM_SERIAL
help
@@ -75,7 +75,7 @@
defined in include/serial.h.
config TPL_DM_SERIAL
- bool "Enable Driver Model for serial drivers"
+ bool "Enable Driver Model for serial drivers in TPL"
depends on DM_SERIAL
default y if TPL && DM_SERIAL
help
diff --git a/include/configs/corvus.h b/include/configs/corvus.h
index 3847a19..8b8b122 100644
--- a/include/configs/corvus.h
+++ b/include/configs/corvus.h
@@ -43,7 +43,6 @@
#define CONFIG_AT91_GPIO_PULLUP 1 /* keep pullups on peripheral pins */
/* serial console */
-#define CONFIG_ATMEL_USART
#define CONFIG_USART_BASE ATMEL_BASE_DBGU
#define CONFIG_USART_ID ATMEL_ID_SYS
@@ -72,7 +71,7 @@
#define CONFIG_SYS_SDRAM_SIZE 0x08000000
#define CONFIG_SYS_INIT_SP_ADDR \
- (CONFIG_SYS_SDRAM_BASE + SZ_4K - GENERATED_GBL_DATA_SIZE)
+ (CONFIG_SYS_SDRAM_BASE + SZ_32K - GENERATED_GBL_DATA_SIZE)
/* NAND flash */
#ifdef CONFIG_CMD_NAND
diff --git a/include/configs/rk3399_common.h b/include/configs/rk3399_common.h
index 7a8a442..44dad57 100644
--- a/include/configs/rk3399_common.h
+++ b/include/configs/rk3399_common.h
@@ -31,7 +31,7 @@
#define CONFIG_SYS_LOAD_ADDR 0x00800800
#define CONFIG_SPL_STACK 0xff8effff
#define CONFIG_SPL_TEXT_BASE 0xff8c2000
-#define CONFIG_SPL_MAX_SIZE 0x30000
+#define CONFIG_SPL_MAX_SIZE 0x30000 - 0x2000
/* BSS setup */
#define CONFIG_SPL_BSS_START_ADDR 0xff8e0000
#define CONFIG_SPL_BSS_MAX_SIZE 0x10000
diff --git a/include/configs/ti_omap5_common.h b/include/configs/ti_omap5_common.h
index d45baab..4c3a276 100644
--- a/include/configs/ti_omap5_common.h
+++ b/include/configs/ti_omap5_common.h
@@ -50,14 +50,12 @@
/*
* Environment setup
*/
-#ifndef PARTS_DEFAULT
-#define PARTS_DEFAULT
-#endif
#ifndef DFUARGS
#define DFUARGS
#endif
+#include <environment/ti/boot.h>
#include <environment/ti/mmc.h>
#define CONFIG_ENV_VARS_UBOOT_RUNTIME_CONFIG
@@ -65,63 +63,11 @@
DEFAULT_LINUX_BOOT_ENV \
DEFAULT_MMC_TI_ARGS \
DEFAULT_FIT_TI_ARGS \
- "console=" CONSOLEDEV ",115200n8\0" \
- "fdtfile=undefined\0" \
- "bootpart=0:2\0" \
- "bootdir=/boot\0" \
- "bootfile=zImage\0" \
- "usbtty=cdc_acm\0" \
- "vram=16M\0" \
- "partitions=" PARTS_DEFAULT "\0" \
- "optargs=\0" \
- "dofastboot=0\0" \
- "findfdt="\
- "if test $board_name = omap5_uevm; then " \
- "setenv fdtfile omap5-uevm.dtb; fi; " \
- "if test $board_name = dra7xx; then " \
- "setenv fdtfile dra7-evm.dtb; fi;" \
- "if test $board_name = dra72x-revc; then " \
- "setenv fdtfile dra72-evm-revc.dtb; fi;" \
- "if test $board_name = dra72x; then " \
- "setenv fdtfile dra72-evm.dtb; fi;" \
- "if test $board_name = dra71x; then " \
- "setenv fdtfile dra71-evm.dtb; fi;" \
- "if test $board_name = beagle_x15; then " \
- "setenv fdtfile am57xx-beagle-x15.dtb; fi;" \
- "if test $board_name = beagle_x15_revb1; then " \
- "setenv fdtfile am57xx-beagle-x15-revb1.dtb; fi;" \
- "if test $board_name = am572x_idk; then " \
- "setenv fdtfile am572x-idk.dtb; fi;" \
- "if test $board_name = am57xx_evm; then " \
- "setenv fdtfile am57xx-beagle-x15.dtb; fi;" \
- "if test $board_name = am57xx_evm_reva3; then " \
- "setenv fdtfile am57xx-beagle-x15.dtb; fi;" \
- "if test $board_name = am571x_idk; then " \
- "setenv fdtfile am571x-idk.dtb; fi;" \
- "if test $fdtfile = undefined; then " \
- "echo WARNING: Could not determine device tree to use; fi; \0" \
+ DEFAULT_COMMON_BOOT_TI_ARGS \
+ DEFAULT_FDT_TI_ARGS \
DFUARGS \
NETARGS \
-#define CONFIG_BOOTCOMMAND \
- "if test ${dofastboot} -eq 1; then " \
- "echo Boot fastboot requested, resetting dofastboot ...;" \
- "setenv dofastboot 0; saveenv;" \
- "echo Booting into fastboot ...; " \
- "fastboot " __stringify(CONFIG_FASTBOOT_USB_DEV) "; " \
- "fi;" \
- "if test ${boot_fit} -eq 1; then " \
- "run update_to_fit;" \
- "fi;" \
- "run findfdt; " \
- "run envboot; " \
- "run mmcboot;" \
- "setenv mmcdev 1; " \
- "setenv bootpart 1:2; " \
- "setenv mmcroot /dev/mmcblk0p2 rw; " \
- "run mmcboot;" \
- ""
-
/*
* SPL related defines. The Public RAM memory map the ROM defines the
* area between 0x40300000 and 0x4031E000 as a download area for OMAP5.
diff --git a/include/environment/ti/boot.h b/include/environment/ti/boot.h
new file mode 100644
index 0000000..1c3ae40
--- /dev/null
+++ b/include/environment/ti/boot.h
@@ -0,0 +1,83 @@
+/*
+ * Boot related environment variable definitions on TI boards.
+ *
+ * (C) Copyright 2017 Linaro Ltd.
+ * Sam Protsenko <semen.protsenko@linaro.org>
+ *
+ * SPDX-License-Identifier: GPL-2.0+
+ */
+
+#ifndef __TI_BOOT_H
+#define __TI_BOOT_H
+
+#ifndef CONSOLEDEV
+#define CONSOLEDEV "ttyO2"
+#endif
+
+#ifndef PARTS_DEFAULT
+#define PARTS_DEFAULT
+#endif
+
+#define DEFAULT_COMMON_BOOT_TI_ARGS \
+ "console=" CONSOLEDEV ",115200n8\0" \
+ "fdtfile=undefined\0" \
+ "bootpart=0:2\0" \
+ "bootdir=/boot\0" \
+ "bootfile=zImage\0" \
+ "usbtty=cdc_acm\0" \
+ "vram=16M\0" \
+ "partitions=" PARTS_DEFAULT "\0" \
+ "optargs=\0" \
+ "dofastboot=0\0"
+
+#ifdef CONFIG_OMAP54XX
+
+#define DEFAULT_FDT_TI_ARGS \
+ "findfdt="\
+ "if test $board_name = omap5_uevm; then " \
+ "setenv fdtfile omap5-uevm.dtb; fi; " \
+ "if test $board_name = dra7xx; then " \
+ "setenv fdtfile dra7-evm.dtb; fi;" \
+ "if test $board_name = dra72x-revc; then " \
+ "setenv fdtfile dra72-evm-revc.dtb; fi;" \
+ "if test $board_name = dra72x; then " \
+ "setenv fdtfile dra72-evm.dtb; fi;" \
+ "if test $board_name = dra71x; then " \
+ "setenv fdtfile dra71-evm.dtb; fi;" \
+ "if test $board_name = beagle_x15; then " \
+ "setenv fdtfile am57xx-beagle-x15.dtb; fi;" \
+ "if test $board_name = beagle_x15_revb1; then " \
+ "setenv fdtfile am57xx-beagle-x15-revb1.dtb; fi;" \
+ "if test $board_name = am572x_idk; then " \
+ "setenv fdtfile am572x-idk.dtb; fi;" \
+ "if test $board_name = am57xx_evm; then " \
+ "setenv fdtfile am57xx-beagle-x15.dtb; fi;" \
+ "if test $board_name = am57xx_evm_reva3; then " \
+ "setenv fdtfile am57xx-beagle-x15.dtb; fi;" \
+ "if test $board_name = am571x_idk; then " \
+ "setenv fdtfile am571x-idk.dtb; fi;" \
+ "if test $fdtfile = undefined; then " \
+ "echo WARNING: Could not determine device tree to use; fi; \0"
+
+#define CONFIG_BOOTCOMMAND \
+ "if test ${dofastboot} -eq 1; then " \
+ "echo Boot fastboot requested, resetting dofastboot ...;" \
+ "setenv dofastboot 0; saveenv;" \
+ "echo Booting into fastboot ...; " \
+ "fastboot " __stringify(CONFIG_FASTBOOT_USB_DEV) "; " \
+ "fi;" \
+ "if test ${boot_fit} -eq 1; then " \
+ "run update_to_fit;" \
+ "fi;" \
+ "run findfdt; " \
+ "run envboot; " \
+ "run mmcboot;" \
+ "setenv mmcdev 1; " \
+ "setenv bootpart 1:2; " \
+ "setenv mmcroot /dev/mmcblk0p2 rw; " \
+ "run mmcboot;" \
+ ""
+
+#endif /* CONFIG_OMAP54XX */
+
+#endif /* __TI_BOOT_H */
diff --git a/post/cpu/ppc4xx/denali_ecc.c b/post/cpu/ppc4xx/denali_ecc.c
index 1190739..ad5e64f 100644
--- a/post/cpu/ppc4xx/denali_ecc.c
+++ b/post/cpu/ppc4xx/denali_ecc.c
@@ -33,6 +33,7 @@
DECLARE_GLOBAL_DATA_PTR;
+#if defined(DEBUG)
const static uint8_t syndrome_codes[] = {
0xF4, 0XF1, 0XEC, 0XEA, 0XE9, 0XE6, 0XE5, 0XE3,
0XDC, 0XDA, 0XD9, 0XD6, 0XD5, 0XD3, 0XCE, 0XCB,
@@ -44,6 +45,7 @@
0X1C, 0X1A, 0X19, 0X16, 0X15, 0X13, 0X0E, 0X0B,
0x80, 0x40, 0x20, 0x10, 0x08, 0x04, 0x02, 0x01
};
+#endif
#define ECC_START_ADDR 0x10
#define ECC_STOP_ADDR 0x2000
diff --git a/tools/rkcommon.c b/tools/rkcommon.c
index a583c0c..1056ffa 100644
--- a/tools/rkcommon.c
+++ b/tools/rkcommon.c
@@ -76,7 +76,7 @@
{ "rk3188", "RK31", 0x8000 - 0x800, true, false },
{ "rk3288", "RK32", 0x8000, false, false },
{ "rk3328", "RK32", 0x8000 - 0x1000, false, false },
- { "rk3399", "RK33", 0x20000, false, true },
+ { "rk3399", "RK33", 0x30000 - 0x2000, false, true },
{ "rv1108", "RK11", 0x1800, false, false},
};
@@ -226,11 +226,6 @@
return ((offset & ~0x7ff) << 1) + (offset & 0x7ff);
}
-static inline unsigned rkcommon_spi_to_offset(unsigned offset)
-{
- return ((offset & ~0x7ff) >> 1) + (offset & 0x7ff);
-}
-
static int rkcommon_parse_header(const void *buf, struct header0_info *header0,
struct spl_info **spl_info)
{