diff --git a/drivers/power/Kconfig b/drivers/power/Kconfig
index 83cb31c..2395720 100644
--- a/drivers/power/Kconfig
+++ b/drivers/power/Kconfig
@@ -101,6 +101,15 @@
 	Select this to enable support for the axp305 pmic found on most
 	H616 boards.
 
+config AXP313_POWER
+	bool "axp313 pmic support"
+	depends on MACH_SUN50I_H616
+	select AXP_PMIC_BUS
+	select CMD_POWEROFF
+	---help---
+	Select this to enable support for the AXP313 PMIC found on some
+	H616 boards.
+
 config AXP809_POWER
 	bool "axp809 pmic support"
 	depends on MACH_SUN9I
@@ -143,9 +152,10 @@
 
 config AXP_DCDC2_VOLT
 	int "axp pmic dcdc2 voltage"
-	depends on AXP152_POWER || AXP209_POWER || AXP221_POWER || AXP809_POWER || AXP818_POWER
+	depends on AXP152_POWER || AXP209_POWER || AXP221_POWER || AXP809_POWER || AXP818_POWER || AXP313_POWER
 	default 900 if AXP818_POWER
 	default 1400 if AXP152_POWER || AXP209_POWER
+	default 1000 if AXP313_POWER
 	default 1200 if MACH_SUN6I
 	default 1100 if MACH_SUN8I
 	default 0 if MACH_SUN9I
@@ -158,13 +168,15 @@
 	On A80 boards dcdc2 powers the GPU and can be left off.
 	On A83T boards dcdc2 is used for VDD-CPUA(cluster 0) and should be 0.9V.
 	On R40 boards dcdc2 is VDD-CPU and should be 1.1V
+	On boards using the AXP313 it's often VDD-CPU.
 
 config AXP_DCDC3_VOLT
 	int "axp pmic dcdc3 voltage"
-	depends on AXP152_POWER || AXP209_POWER || AXP221_POWER || AXP809_POWER || AXP818_POWER
+	depends on AXP152_POWER || AXP209_POWER || AXP221_POWER || AXP809_POWER || AXP818_POWER || AXP313_POWER
 	default 900 if AXP809_POWER || AXP818_POWER
 	default 1500 if AXP152_POWER
 	default 1250 if AXP209_POWER
+	default 1100 if AXP313_POWER
 	default 1100 if MACH_SUN8I_R40
 	default 1200 if MACH_SUN6I || MACH_SUN8I
 	---help---
@@ -177,6 +189,7 @@
 	On A80 boards dcdc3 is used for VDD-CPUA(cluster 0) and should be 0.9V.
 	On A83T boards dcdc3 is used for VDD-CPUB(cluster 1) and should be 0.9V.
 	On R40 boards dcdc3 is VDD-SYS and VDD-GPU and should be 1.1V.
+	On boards using the AXP313 it's often VDD-DRAM and should be 1.1V for LPDDR4.
 
 config AXP_DCDC4_VOLT
 	int "axp pmic dcdc4 voltage"