net: phy: Set ANRESTART in setup_forced
When configuring a PHY in fixed (forced) link mode, in order for
the changes to be applied, either one of these conditions must
be triggered:
1- PHY is reset
2- Autoneg is restarted
3- PHY transitions from power-down to power-up
Neither of these is currently done, so effectively the fixed link
configuration is not applied in the PHY.
Fix this by setting the Autoneg restart bit.
Signed-off-by: Alexandre Messier <amessier@tycoint.com>
Acked-by: Joe Hershberger <joe.hershberger@ni.com>
diff --git a/drivers/net/phy/phy.c b/drivers/net/phy/phy.c
index e25d4e3..a06115d 100644
--- a/drivers/net/phy/phy.c
+++ b/drivers/net/phy/phy.c
@@ -128,7 +128,7 @@
static int genphy_setup_forced(struct phy_device *phydev)
{
int err;
- int ctl = 0;
+ int ctl = BMCR_ANRESTART;
phydev->pause = phydev->asym_pause = 0;