arm64: dts: zynqmp: Fix nand dt node
DC3 nand node is not correct, it is showing all partitions under
controller node directly. Create two sub nand nodes with partitions for
each.
Signed-off-by: Ashok Reddy Soma <ashok.reddy.soma@amd.com>
Link: https://lore.kernel.org/r/20230224050709.30014-4-ashok.reddy.soma@amd.com
Signed-off-by: Michal Simek <michal.simek@amd.com>
diff --git a/arch/arm/dts/zynqmp-zc1751-xm017-dc3.dts b/arch/arm/dts/zynqmp-zc1751-xm017-dc3.dts
index 1381247..8a06c2a 100644
--- a/arch/arm/dts/zynqmp-zc1751-xm017-dc3.dts
+++ b/arch/arm/dts/zynqmp-zc1751-xm017-dc3.dts
@@ -128,54 +128,77 @@
arasan,has-mdma;
num-cs = <2>;
- partition@0 { /* for testing purpose */
- label = "nand-fsbl-uboot";
- reg = <0x0 0x0 0x400000>;
- };
- partition@1 { /* for testing purpose */
- label = "nand-linux";
- reg = <0x0 0x400000 0x1400000>;
- };
- partition@2 { /* for testing purpose */
- label = "nand-device-tree";
- reg = <0x0 0x1800000 0x400000>;
- };
- partition@3 { /* for testing purpose */
- label = "nand-rootfs";
- reg = <0x0 0x1C00000 0x1400000>;
- };
- partition@4 { /* for testing purpose */
- label = "nand-bitstream";
- reg = <0x0 0x3000000 0x400000>;
- };
- partition@5 { /* for testing purpose */
- label = "nand-misc";
- reg = <0x0 0x3400000 0xFCC00000>;
- };
+ nand@0 {
+ reg = <0x0>;
+ #address-cells = <0x2>;
+ #size-cells = <0x1>;
+ nand-ecc-mode = "soft";
+ nand-ecc-algo = "bch";
+ nand-rb = <0>;
+ label = "main-storage-0";
+ nand-ecc-step-size = <1024>;
+ nand-ecc-strength = <24>;
- partition@6 { /* for testing purpose */
- label = "nand1-fsbl-uboot";
- reg = <0x1 0x0 0x400000>;
+ partition@0 { /* for testing purpose */
+ label = "nand-fsbl-uboot";
+ reg = <0x0 0x0 0x400000>;
+ };
+ partition@1 { /* for testing purpose */
+ label = "nand-linux";
+ reg = <0x0 0x400000 0x1400000>;
+ };
+ partition@2 { /* for testing purpose */
+ label = "nand-device-tree";
+ reg = <0x0 0x1800000 0x400000>;
+ };
+ partition@3 { /* for testing purpose */
+ label = "nand-rootfs";
+ reg = <0x0 0x1C00000 0x1400000>;
+ };
+ partition@4 { /* for testing purpose */
+ label = "nand-bitstream";
+ reg = <0x0 0x3000000 0x400000>;
+ };
+ partition@5 { /* for testing purpose */
+ label = "nand-misc";
+ reg = <0x0 0x3400000 0xFCC00000>;
+ };
};
- partition@7 { /* for testing purpose */
- label = "nand1-linux";
- reg = <0x1 0x400000 0x1400000>;
- };
- partition@8 { /* for testing purpose */
- label = "nand1-device-tree";
- reg = <0x1 0x1800000 0x400000>;
- };
- partition@9 { /* for testing purpose */
- label = "nand1-rootfs";
- reg = <0x1 0x1C00000 0x1400000>;
- };
- partition@10 { /* for testing purpose */
- label = "nand1-bitstream";
- reg = <0x1 0x3000000 0x400000>;
- };
- partition@11 { /* for testing purpose */
- label = "nand1-misc";
- reg = <0x1 0x3400000 0xFCC00000>;
+ nand@1 {
+ reg = <0x1>;
+ #address-cells = <0x2>;
+ #size-cells = <0x1>;
+ nand-ecc-mode = "soft";
+ nand-ecc-algo = "bch";
+ nand-rb = <0>;
+ label = "main-storage-1";
+ nand-ecc-step-size = <1024>;
+ nand-ecc-strength = <24>;
+
+ partition@0 { /* for testing purpose */
+ label = "nand1-fsbl-uboot";
+ reg = <0x0 0x0 0x400000>;
+ };
+ partition@1 { /* for testing purpose */
+ label = "nand1-linux";
+ reg = <0x0 0x400000 0x1400000>;
+ };
+ partition@2 { /* for testing purpose */
+ label = "nand1-device-tree";
+ reg = <0x0 0x1800000 0x400000>;
+ };
+ partition@3 { /* for testing purpose */
+ label = "nand1-rootfs";
+ reg = <0x0 0x1C00000 0x1400000>;
+ };
+ partition@4 { /* for testing purpose */
+ label = "nand1-bitstream";
+ reg = <0x0 0x3000000 0x400000>;
+ };
+ partition@5 { /* for testing purpose */
+ label = "nand1-misc";
+ reg = <0x0 0x3400000 0xFCC00000>;
+ };
};
};