pico-imx6ul: README: Adjust the binary name after DM conversion
After the conversion to DM the U-Boot binary is called u-boot-dtb.imx,
so fix the README file accordingly.
Signed-off-by: Fabio Estevam <festevam@gmail.com>
Acked-by: Otavio Salvador <otavio@ossystems.com.br>
diff --git a/board/technexion/pico-imx6ul/README b/board/technexion/pico-imx6ul/README
index 1cabd90..bb8ee3f 100644
--- a/board/technexion/pico-imx6ul/README
+++ b/board/technexion/pico-imx6ul/README
@@ -13,7 +13,7 @@
$ make pico-imx6ul_defconfig
$ make
-This generates the SPL and u-boot.img binaries.
+This generates the SPL and u-boot-dtb.img binaries.
1. Loading U-Boot via USB Serial Download Protocol
@@ -31,15 +31,15 @@
Open a terminal program such as minicom.
-Copy SPL and u-boot.img to the imx_usb_loader folder.
+Copy SPL and u-boot-dtb.img to the imx_usb_loader folder.
Load the SPL binary via USB:
$ sudo ./imx_usb SPL
-Load the u-boot.img binary via USB:
+Load the u-boot-dtb.img binary via USB:
-$ sudo ./imx_usb u-boot.img
+$ sudo ./imx_usb u-boot-dtb.img
Then U-Boot starts and its messages appear in the console program.
@@ -54,11 +54,11 @@
=> dfu 0 mmc 0
-Flash SPL and u-boot.img into the eMMC running the following commands on a PC:
+Flash SPL and u-boot-dtb.img into the eMMC running the following commands on a PC:
$ sudo dfu-util -D SPL -a spl
-$ sudo dfu-util -D u-boot.img -a u-boot
+$ sudo dfu-util -D u-boot-dtb.img -a u-boot
Remove power from the pico board.
@@ -142,7 +142,7 @@
Flash the new binaries:
$ sudo dd if=SPL of=/dev/sdX bs=1k seek=1; sync
-$ sudo dd if=u-boot.img of=/dev/sdX bs=1k seek=69; sync
+$ sudo dd if=u-boot-dtb.img of=/dev/sdX bs=1k seek=69; sync
And then SPL binary will load and jump directly to the kernel: