omap4: support TPS programming
TPS62361 is the new power supply used in OMAP4460 that
supplies vdd_mpu.
VCORE1 from Phoenix supplies vdd_core and VCORE2 supplies
vdd_iva. VCORE3 is not used in OMAP4460.
Signed-off-by: Aneesh V <aneesh@ti.com>
Signed-off-by: Sandeep Paulraj <s-paulraj@ti.com>
diff --git a/arch/arm/include/asm/arch-omap4/clocks.h b/arch/arm/include/asm/arch-omap4/clocks.h
index 37bdcee..5d9cb50 100644
--- a/arch/arm/include/asm/arch-omap4/clocks.h
+++ b/arch/arm/include/asm/arch-omap4/clocks.h
@@ -618,6 +618,7 @@
#define PRM_VC_VAL_BYPASS_DATA_SHIFT 16
#define PRM_VC_VAL_BYPASS_DATA_MASK 0xFF
+/* SMPS */
#define SMPS_I2C_SLAVE_ADDR 0x12
#define SMPS_REG_ADDR_VCORE1 0x55
#define SMPS_REG_ADDR_VCORE2 0x5B
@@ -626,6 +627,21 @@
#define PHOENIX_SMPS_BASE_VOLT_STD_MODE_UV 607700
#define PHOENIX_SMPS_BASE_VOLT_STD_MODE_WITH_OFFSET_UV 709000
+/* TPS */
+#define TPS62361_I2C_SLAVE_ADDR 0x60
+#define TPS62361_REG_ADDR_SET0 0x0
+#define TPS62361_REG_ADDR_SET1 0x1
+#define TPS62361_REG_ADDR_SET2 0x2
+#define TPS62361_REG_ADDR_SET3 0x3
+#define TPS62361_REG_ADDR_CTRL 0x4
+#define TPS62361_REG_ADDR_TEMP 0x5
+#define TPS62361_REG_ADDR_RMP_CTRL 0x6
+#define TPS62361_REG_ADDR_CHIP_ID 0x8
+#define TPS62361_REG_ADDR_CHIP_ID_2 0x9
+
+#define TPS62361_BASE_VOLT_MV 500
+#define TPS62361_VSEL0_GPIO 7
+
/* Defines for DPLL setup */
#define DPLL_LOCKED_FREQ_TOLERANCE_0 0
#define DPLL_LOCKED_FREQ_TOLERANCE_500_KHZ 500
diff --git a/arch/arm/include/asm/arch-omap4/mux_omap4.h b/arch/arm/include/asm/arch-omap4/mux_omap4.h
index 019574b..30bfad7 100644
--- a/arch/arm/include/asm/arch-omap4/mux_omap4.h
+++ b/arch/arm/include/asm/arch-omap4/mux_omap4.h
@@ -341,4 +341,5 @@
#define CONTROL_SPARE_R 0x0618
#define CONTROL_SPARE_R_C0 0x061C
+#define CONTROL_WKUP_PAD1_FREF_CLK4_REQ 0x4A31E05A
#endif /* _MUX_OMAP4_H_ */