common: delete CONFIG_SYS_64BIT_VSPRINTF and CONFIG_SYS_64BIT_STRTOUL

There is more and more usage of printing 64bit values,
so enable this feature generally, and delete the
CONFIG_SYS_64BIT_VSPRINTF and CONFIG_SYS_64BIT_STRTOUL
defines.

Signed-off-by: Heiko Schocher <hs@denx.de>
diff --git a/README b/README
index fe6ca98..22e35c3 100644
--- a/README
+++ b/README
@@ -777,7 +777,7 @@
 		CONFIG_LBA48
 
 		Set this to enable support for disks larger than 137GB
-		Also look at CONFIG_SYS_64BIT_LBA ,CONFIG_SYS_64BIT_VSPRINTF and CONFIG_SYS_64BIT_STRTOUL
+		Also look at CONFIG_SYS_64BIT_LBA.
 		Whithout these , LBA48 support uses 32bit variables and will 'only'
 		support disks up to 2.1TB.
 
@@ -2524,13 +2524,6 @@
 - CONFIG_SYS_FAULT_MII_ADDR:
 		MII address of the PHY to check for the Ethernet link state.
 
-- CONFIG_SYS_64BIT_VSPRINTF:
-		Makes vsprintf (and all *printf functions) support printing
-		of 64bit values by using the L quantifier
-
-- CONFIG_SYS_64BIT_STRTOUL:
-		Adds simple_strtoull that returns a 64bit value
-
 - CONFIG_NS16550_MIN_FUNCTIONS:
 		Define this if you desire to only have use of the NS16550_init
 		and NS16550_putc functions for the serial driver located at
diff --git a/common/cmd_fdt.c b/common/cmd_fdt.c
index 919a0bf..5df79ae 100644
--- a/common/cmd_fdt.c
+++ b/common/cmd_fdt.c
@@ -364,13 +364,8 @@
 	} else if (strncmp(argv[1], "me", 2) == 0) {
 		uint64_t addr, size;
 		int err;
-#ifdef CONFIG_SYS_64BIT_STRTOUL
-			addr = simple_strtoull(argv[2], NULL, 16);
-			size = simple_strtoull(argv[3], NULL, 16);
-#else
-			addr = simple_strtoul(argv[2], NULL, 16);
-			size = simple_strtoul(argv[3], NULL, 16);
-#endif
+		addr = simple_strtoull(argv[2], NULL, 16);
+		size = simple_strtoull(argv[3], NULL, 16);
 		err = fdt_fixup_memory(working_fdt, addr, size);
 		if (err < 0)
 			return err;
@@ -402,13 +397,8 @@
 		} else if (argv[2][0] == 'a') {
 			uint64_t addr, size;
 			int err;
-#ifdef CONFIG_SYS_64BIT_STRTOUL
 			addr = simple_strtoull(argv[3], NULL, 16);
 			size = simple_strtoull(argv[4], NULL, 16);
-#else
-			addr = simple_strtoul(argv[3], NULL, 16);
-			size = simple_strtoul(argv[4], NULL, 16);
-#endif
 			err = fdt_add_mem_rsv(working_fdt, addr, size);
 
 			if (err < 0) {
diff --git a/common/cmd_ide.c b/common/cmd_ide.c
index ec9a1df..093ca9f 100644
--- a/common/cmd_ide.c
+++ b/common/cmd_ide.c
@@ -1354,7 +1354,7 @@
 		}
 
 		if ((c&(ATA_STAT_DRQ|ATA_STAT_BUSY|ATA_STAT_ERR)) != ATA_STAT_DRQ) {
-#if defined(CONFIG_SYS_64BIT_LBA) && defined(CONFIG_SYS_64BIT_VSPRINTF)
+#if defined(CONFIG_SYS_64BIT_LBA)
 			printf ("Error (no IRQ) dev %d blk %Ld: status 0x%02x\n",
 				device, blknr, c);
 #else
@@ -1444,7 +1444,7 @@
 		c = ide_wait (device, IDE_TIME_OUT);	/* can't take over 500 ms */
 
 		if ((c&(ATA_STAT_DRQ|ATA_STAT_BUSY|ATA_STAT_ERR)) != ATA_STAT_DRQ) {
-#if defined(CONFIG_SYS_64BIT_LBA) && defined(CONFIG_SYS_64BIT_VSPRINTF)
+#if defined(CONFIG_SYS_64BIT_LBA)
 			printf ("Error (no IRQ) dev %d blk %Ld: status 0x%02x\n",
 				device, blknr, c);
 #else
diff --git a/common/cmd_onenand.c b/common/cmd_onenand.c
index 9090940..565257c 100644
--- a/common/cmd_onenand.c
+++ b/common/cmd_onenand.c
@@ -19,10 +19,6 @@
 
 #include <asm/io.h>
 
-#if !defined(CONFIG_SYS_64BIT_VSPRINTF)
-#warning Please define CONFIG_SYS_64BIT_VSPRINTF for correct output!
-#endif
-
 static struct mtd_info *mtd;
 
 static loff_t next_ofs;
diff --git a/common/image.c b/common/image.c
index 5cc3ab4..82e7aa4 100644
--- a/common/image.c
+++ b/common/image.c
@@ -436,11 +436,7 @@
 	char *s = getenv ("bootm_size");
 	if (s) {
 		phys_size_t tmp;
-#ifdef CONFIG_SYS_64BIT_STRTOUL
 		tmp = (phys_size_t)simple_strtoull (s, NULL, 16);
-#else
-		tmp = (phys_size_t)simple_strtoul (s, NULL, 16);
-#endif
 		return tmp;
 	}
 
diff --git a/cpu/mpc85xx/mp.c b/cpu/mpc85xx/mp.c
index 00b6450..7626eb8 100644
--- a/cpu/mpc85xx/mp.c
+++ b/cpu/mpc85xx/mp.c
@@ -90,11 +90,7 @@
 		return 1;
 	}
 
-#ifdef CONFIG_SYS_64BIT_STRTOUL
 	boot_addr = simple_strtoull(argv[0], NULL, 16);
-#else
-	boot_addr = simple_strtoul(argv[0], NULL, 16);
-#endif
 
 	/* handle pir, r3, r6 */
 	for (i = 1; i < 4; i++) {
diff --git a/disk/part.c b/disk/part.c
index 9ced452..b6bae17 100644
--- a/disk/part.c
+++ b/disk/part.c
@@ -196,7 +196,7 @@
 		if (dev_desc->lba48)
 			printf ("            Supports 48-bit addressing\n");
 #endif
-#if defined(CONFIG_SYS_64BIT_LBA) && defined(CONFIG_SYS_64BIT_VSPRINTF)
+#if defined(CONFIG_SYS_64BIT_LBA)
 		printf ("            Capacity: %ld.%ld MB = %ld.%ld GB (%Ld x %ld)\n",
 			mb_quot, mb_rem,
 			gb_quot, gb_rem,
diff --git a/drivers/mtd/nand/nand_util.c b/drivers/mtd/nand/nand_util.c
index 7085d42..df7f140 100644
--- a/drivers/mtd/nand/nand_util.c
+++ b/drivers/mtd/nand/nand_util.c
@@ -41,10 +41,6 @@
 #include <nand.h>
 #include <jffs2/jffs2.h>
 
-#if !defined(CONFIG_SYS_64BIT_VSPRINTF)
-#warning Please define CONFIG_SYS_64BIT_VSPRINTF for correct output!
-#endif
-
 typedef struct erase_info erase_info_t;
 typedef struct mtd_info	  mtd_info_t;
 
diff --git a/fs/ubifs/ubifs.c b/fs/ubifs/ubifs.c
index 82f1c54..3fc7990 100644
--- a/fs/ubifs/ubifs.c
+++ b/fs/ubifs/ubifs.c
@@ -26,10 +26,6 @@
 #include "ubifs.h"
 #include <u-boot/zlib.h>
 
-#if !defined(CONFIG_SYS_64BIT_VSPRINTF)
-#warning Please define CONFIG_SYS_64BIT_VSPRINTF for correct output!
-#endif
-
 DECLARE_GLOBAL_DATA_PTR;
 
 /* compress.c */
diff --git a/include/common.h b/include/common.h
index 749d35c..00b5434 100644
--- a/include/common.h
+++ b/include/common.h
@@ -617,9 +617,7 @@
 
 /* lib_generic/vsprintf.c */
 ulong	simple_strtoul(const char *cp,char **endp,unsigned int base);
-#ifdef CONFIG_SYS_64BIT_VSPRINTF
 unsigned long long	simple_strtoull(const char *cp,char **endp,unsigned int base);
-#endif
 long	simple_strtol(const char *cp,char **endp,unsigned int base);
 void	panic(const char *fmt, ...)
 		__attribute__ ((format (__printf__, 1, 2)));
diff --git a/include/configs/ASH405.h b/include/configs/ASH405.h
index 694a87b..5cb0f1e 100644
--- a/include/configs/ASH405.h
+++ b/include/configs/ASH405.h
@@ -160,8 +160,6 @@
 #define CONFIG_SYS_NAND_SKIP_BAD_DOT_I	1	/* ".i" read skips bad blocks   */
 #define CONFIG_SYS_NAND_QUIET		1
 
-#define CONFIG_SYS_64BIT_VSPRINTF	/* needed for nand_util.c */
-
 /*-----------------------------------------------------------------------
  * PCI stuff
  *-----------------------------------------------------------------------
diff --git a/include/configs/CMS700.h b/include/configs/CMS700.h
index 2384925..ae8494d 100644
--- a/include/configs/CMS700.h
+++ b/include/configs/CMS700.h
@@ -165,8 +165,6 @@
 #define CONFIG_SYS_NAND_SKIP_BAD_DOT_I 1       /* ".i" read skips bad blocks   */
 #define CONFIG_SYS_NAND_QUIET          1
 
-#define CONFIG_SYS_64BIT_VSPRINTF	/* needed for nand_util.c */
-
 /*
  * For booting Linux, the board info and command line data
  * have to be in the first 8 MB of memory, since this is
diff --git a/include/configs/HH405.h b/include/configs/HH405.h
index 1a2266f..9233523 100644
--- a/include/configs/HH405.h
+++ b/include/configs/HH405.h
@@ -219,8 +219,6 @@
 #define CONFIG_SYS_NAND_SKIP_BAD_DOT_I 1       /* ".i" read skips bad blocks   */
 #define CONFIG_SYS_NAND_QUIET          1
 
-#define CONFIG_SYS_64BIT_VSPRINTF	/* needed for nand_util.c */
-
 /*-----------------------------------------------------------------------
  * PCI stuff
  *-----------------------------------------------------------------------
diff --git a/include/configs/HUB405.h b/include/configs/HUB405.h
index 518d94d..ea502d4 100644
--- a/include/configs/HUB405.h
+++ b/include/configs/HUB405.h
@@ -160,8 +160,6 @@
 #define CONFIG_SYS_NAND_SKIP_BAD_DOT_I 1       /* ".i" read skips bad blocks   */
 #define CONFIG_SYS_NAND_QUIET          1
 
-#define CONFIG_SYS_64BIT_VSPRINTF	/* needed for nand_util.c */
-
 /*-----------------------------------------------------------------------
  * PCI stuff
  *-----------------------------------------------------------------------
diff --git a/include/configs/IDS8247.h b/include/configs/IDS8247.h
index 147a8b2..71bb7b4 100644
--- a/include/configs/IDS8247.h
+++ b/include/configs/IDS8247.h
@@ -263,8 +263,6 @@
 #define CONFIG_SYS_NAND0_BASE 0xE1000000
 #define CONFIG_SYS_MAX_NAND_DEVICE     1       /* Max number of NAND devices           */
 
-#define CONFIG_SYS_64BIT_VSPRINTF		/* needed for nand_util.c */
-
 #endif /* CONFIG_CMD_NAND */
 
 /*-----------------------------------------------------------------------
diff --git a/include/configs/MPC8313ERDB.h b/include/configs/MPC8313ERDB.h
index 5927e76..0a4ba29 100644
--- a/include/configs/MPC8313ERDB.h
+++ b/include/configs/MPC8313ERDB.h
@@ -236,7 +236,6 @@
 #define CONFIG_CMD_NAND 1
 #define CONFIG_NAND_FSL_ELBC 1
 #define CONFIG_SYS_NAND_BLOCK_SIZE 16384
-#define CONFIG_SYS_64BIT_VSPRINTF	/* needed for nand_util.c */
 
 #define CONFIG_SYS_NAND_U_BOOT_SIZE  (512 << 10)
 #define CONFIG_SYS_NAND_U_BOOT_DST   0x00100000
diff --git a/include/configs/MPC8315ERDB.h b/include/configs/MPC8315ERDB.h
index 8eaff5d..79376b3 100644
--- a/include/configs/MPC8315ERDB.h
+++ b/include/configs/MPC8315ERDB.h
@@ -228,7 +228,6 @@
 #define CONFIG_MTD_NAND_VERIFY_WRITE	1
 #define CONFIG_CMD_NAND			1
 #define CONFIG_NAND_FSL_ELBC		1
-#define CONFIG_SYS_64BIT_VSPRINTF	/* needed for nand_util.c */
 
 #define CONFIG_SYS_BR1_PRELIM	( CONFIG_SYS_NAND_BASE \
 				| (2<<BR_DECC_SHIFT)	/* Use HW ECC */ \
diff --git a/include/configs/MPC8360ERDK.h b/include/configs/MPC8360ERDK.h
index 6cee78a..1d1f94f 100644
--- a/include/configs/MPC8360ERDK.h
+++ b/include/configs/MPC8360ERDK.h
@@ -213,7 +213,6 @@
 #define CONFIG_NAND_FSL_UPM	1
 #define CONFIG_SYS_MAX_NAND_DEVICE	1
 #define CONFIG_MTD_NAND_VERIFY_WRITE
-#define CONFIG_SYS_64BIT_VSPRINTF	/* needed for nand_util.c */
 
 #define CONFIG_SYS_LBLAWBAR1_PRELIM	CONFIG_SYS_NAND_BASE
 #define CONFIG_SYS_LBLAWAR1_PRELIM	0x8000001b /* Access window size 4K */
diff --git a/include/configs/MPC837XEMDS.h b/include/configs/MPC837XEMDS.h
index abeb6a2..63f1d85 100644
--- a/include/configs/MPC837XEMDS.h
+++ b/include/configs/MPC837XEMDS.h
@@ -321,9 +321,6 @@
 #define CONFIG_OF_BOARD_SETUP	1
 #define CONFIG_OF_STDOUT_VIA_ALIAS	1
 
-#define CONFIG_SYS_64BIT_STRTOUL		1
-#define CONFIG_SYS_64BIT_VSPRINTF		1
-
 /* I2C */
 #define CONFIG_HARD_I2C		/* I2C with hardware support */
 #undef CONFIG_SOFT_I2C		/* I2C bit-banged */
diff --git a/include/configs/MPC837XERDB.h b/include/configs/MPC837XERDB.h
index 7ef92f7..913184c 100644
--- a/include/configs/MPC837XERDB.h
+++ b/include/configs/MPC837XERDB.h
@@ -343,9 +343,6 @@
 #define CONFIG_OF_BOARD_SETUP	1
 #define CONFIG_OF_STDOUT_VIA_ALIAS 1
 
-#define CONFIG_SYS_64BIT_STRTOUL		1
-#define CONFIG_SYS_64BIT_VSPRINTF		1
-
 /* I2C */
 #define CONFIG_HARD_I2C		/* I2C with hardware support */
 #undef	CONFIG_SOFT_I2C		/* I2C bit-banged */
diff --git a/include/configs/MPC8536DS.h b/include/configs/MPC8536DS.h
index 46d6e9d..87901b3 100644
--- a/include/configs/MPC8536DS.h
+++ b/include/configs/MPC8536DS.h
@@ -433,10 +433,6 @@
 #define CONFIG_OF_BOARD_SETUP		1
 #define CONFIG_OF_STDOUT_VIA_ALIAS	1
 
-#define CONFIG_SYS_64BIT_STRTOUL	1
-#define CONFIG_SYS_64BIT_VSPRINTF	1
-
-
 /*
  * I2C
  */
diff --git a/include/configs/MPC8540ADS.h b/include/configs/MPC8540ADS.h
index 4af599b..78bb74b 100644
--- a/include/configs/MPC8540ADS.h
+++ b/include/configs/MPC8540ADS.h
@@ -260,9 +260,6 @@
 #define CONFIG_OF_BOARD_SETUP		1
 #define CONFIG_OF_STDOUT_VIA_ALIAS	1
 
-#define CONFIG_SYS_64BIT_VSPRINTF	1
-#define CONFIG_SYS_64BIT_STRTOUL	1
-
 /*
  * I2C
  */
diff --git a/include/configs/MPC8541CDS.h b/include/configs/MPC8541CDS.h
index f41fe30..e945da2 100644
--- a/include/configs/MPC8541CDS.h
+++ b/include/configs/MPC8541CDS.h
@@ -286,9 +286,6 @@
 #define CONFIG_OF_BOARD_SETUP		1
 #define CONFIG_OF_STDOUT_VIA_ALIAS	1
 
-#define CONFIG_SYS_64BIT_VSPRINTF	1
-#define CONFIG_SYS_64BIT_STRTOUL	1
-
 /*
  * I2C
  */
diff --git a/include/configs/MPC8544DS.h b/include/configs/MPC8544DS.h
index b7d3553..799d946 100644
--- a/include/configs/MPC8544DS.h
+++ b/include/configs/MPC8544DS.h
@@ -242,9 +242,6 @@
 #define CONFIG_OF_BOARD_SETUP		1
 #define CONFIG_OF_STDOUT_VIA_ALIAS	1
 
-#define CONFIG_SYS_64BIT_STRTOUL		1
-#define CONFIG_SYS_64BIT_VSPRINTF		1
-
 /* I2C */
 #define CONFIG_FSL_I2C		/* Use FSL common I2C driver */
 #define CONFIG_HARD_I2C		/* I2C with hardware support */
diff --git a/include/configs/MPC8548CDS.h b/include/configs/MPC8548CDS.h
index 53de56d..3eb0049 100644
--- a/include/configs/MPC8548CDS.h
+++ b/include/configs/MPC8548CDS.h
@@ -309,9 +309,6 @@
 #define CONFIG_OF_BOARD_SETUP		1
 #define CONFIG_OF_STDOUT_VIA_ALIAS	1
 
-#define CONFIG_SYS_64BIT_VSPRINTF	1
-#define CONFIG_SYS_64BIT_STRTOUL	1
-
 /*
  * I2C
  */
diff --git a/include/configs/MPC8555CDS.h b/include/configs/MPC8555CDS.h
index abbfd47..07a8e61 100644
--- a/include/configs/MPC8555CDS.h
+++ b/include/configs/MPC8555CDS.h
@@ -284,9 +284,6 @@
 #define CONFIG_OF_BOARD_SETUP		1
 #define CONFIG_OF_STDOUT_VIA_ALIAS	1
 
-#define CONFIG_SYS_64BIT_VSPRINTF	1
-#define CONFIG_SYS_64BIT_STRTOUL	1
-
 /*
  * I2C
  */
diff --git a/include/configs/MPC8560ADS.h b/include/configs/MPC8560ADS.h
index df59aca..4a4a9ed 100644
--- a/include/configs/MPC8560ADS.h
+++ b/include/configs/MPC8560ADS.h
@@ -253,9 +253,6 @@
 #define CONFIG_OF_BOARD_SETUP		1
 #define CONFIG_OF_STDOUT_VIA_ALIAS	1
 
-#define CONFIG_SYS_64BIT_VSPRINTF	1
-#define CONFIG_SYS_64BIT_STRTOUL	1
-
 /*
  * I2C
  */
diff --git a/include/configs/MPC8568MDS.h b/include/configs/MPC8568MDS.h
index 426b933..128a7e1 100644
--- a/include/configs/MPC8568MDS.h
+++ b/include/configs/MPC8568MDS.h
@@ -270,9 +270,6 @@
 #define CONFIG_OF_BOARD_SETUP		1
 #define CONFIG_OF_STDOUT_VIA_ALIAS	1
 
-#define CONFIG_SYS_64BIT_VSPRINTF	1
-#define CONFIG_SYS_64BIT_STRTOUL	1
-
 /*
  * I2C
  */
diff --git a/include/configs/MPC8569MDS.h b/include/configs/MPC8569MDS.h
index b87f375..1e659e2 100644
--- a/include/configs/MPC8569MDS.h
+++ b/include/configs/MPC8569MDS.h
@@ -247,9 +247,6 @@
 #define CONFIG_OF_BOARD_SETUP		1
 #define CONFIG_OF_STDOUT_VIA_ALIAS	1
 
-#define CONFIG_SYS_64BIT_VSPRINTF	1
-#define CONFIG_SYS_64BIT_STRTOUL	1
-
 /*
  * I2C
  */
diff --git a/include/configs/MPC8572DS.h b/include/configs/MPC8572DS.h
index 0e7745c..41e4a6e 100644
--- a/include/configs/MPC8572DS.h
+++ b/include/configs/MPC8572DS.h
@@ -367,9 +367,6 @@
 #define CONFIG_OF_BOARD_SETUP		1
 #define CONFIG_OF_STDOUT_VIA_ALIAS	1
 
-#define CONFIG_SYS_64BIT_VSPRINTF	1
-#define CONFIG_SYS_64BIT_STRTOUL	1
-
 /* new uImage format support */
 #define CONFIG_FIT		1
 #define CONFIG_FIT_VERBOSE	1 /* enable fit_format_{error,warning}() */
diff --git a/include/configs/MPC8610HPCD.h b/include/configs/MPC8610HPCD.h
index 7cb4ccd..1d2d659 100644
--- a/include/configs/MPC8610HPCD.h
+++ b/include/configs/MPC8610HPCD.h
@@ -251,9 +251,6 @@
 /* maximum size of the flat tree (8K) */
 #define OF_FLAT_TREE_MAX_SIZE	8192
 
-#define CONFIG_SYS_64BIT_VSPRINTF	1
-#define CONFIG_SYS_64BIT_STRTOUL	1
-
 /*
  * I2C
  */
diff --git a/include/configs/MPC8641HPCN.h b/include/configs/MPC8641HPCN.h
index a46f7c8..12a8f60 100644
--- a/include/configs/MPC8641HPCN.h
+++ b/include/configs/MPC8641HPCN.h
@@ -301,10 +301,6 @@
 #define CONFIG_OF_BOARD_SETUP		1
 #define CONFIG_OF_STDOUT_VIA_ALIAS	1
 
-
-#define CONFIG_SYS_64BIT_VSPRINTF	1
-#define CONFIG_SYS_64BIT_STRTOUL	1
-
 /*
  * I2C
  */
diff --git a/include/configs/P1_P2_RDB.h b/include/configs/P1_P2_RDB.h
index e2930c1..ddfe7aa 100644
--- a/include/configs/P1_P2_RDB.h
+++ b/include/configs/P1_P2_RDB.h
@@ -310,9 +310,6 @@
 #define CONFIG_OF_BOARD_SETUP		1
 #define CONFIG_OF_STDOUT_VIA_ALIAS	1
 
-#define CONFIG_SYS_64BIT_VSPRINTF	1
-#define CONFIG_SYS_64BIT_STRTOUL	1
-
 /* new uImage format support */
 #define CONFIG_FIT		1
 #define CONFIG_FIT_VERBOSE	1 /* enable fit_format_{error,warning}() */
diff --git a/include/configs/P2020DS.h b/include/configs/P2020DS.h
index 9574fca..df9ab34 100644
--- a/include/configs/P2020DS.h
+++ b/include/configs/P2020DS.h
@@ -401,9 +401,6 @@
 #define CONFIG_OF_BOARD_SETUP		1
 #define CONFIG_OF_STDOUT_VIA_ALIAS	1
 
-#define CONFIG_SYS_64BIT_VSPRINTF	1
-#define CONFIG_SYS_64BIT_STRTOUL	1
-
 /* new uImage format support */
 #define CONFIG_FIT		1
 #define CONFIG_FIT_VERBOSE	1 /* enable fit_format_{error,warning}() */
diff --git a/include/configs/PLU405.h b/include/configs/PLU405.h
index 5f5f1c7..3d59454 100644
--- a/include/configs/PLU405.h
+++ b/include/configs/PLU405.h
@@ -181,8 +181,6 @@
 #define CONFIG_SYS_NAND_SKIP_BAD_DOT_I 1       /* ".i" read skips bad blocks   */
 #define CONFIG_SYS_NAND_QUIET          1
 
-#define CONFIG_SYS_64BIT_VSPRINTF	/* needed for nand_util.c */
-
 /*
  * PCI stuff
  */
diff --git a/include/configs/PPChameleonEVB.h b/include/configs/PPChameleonEVB.h
index 6fba0ca..8e9d928 100644
--- a/include/configs/PPChameleonEVB.h
+++ b/include/configs/PPChameleonEVB.h
@@ -211,8 +211,6 @@
  *-----------------------------------------------------------------------
  */
 
-#define CONFIG_SYS_64BIT_VSPRINTF	/* needed for nand_util.c */
-
 /*
  * nand device 1 on dave (PPChameleonEVB) needs more time,
  * so we just introduce additional wait in nand_wait(),
diff --git a/include/configs/SIMPC8313.h b/include/configs/SIMPC8313.h
index f68d834..36e952e 100644
--- a/include/configs/SIMPC8313.h
+++ b/include/configs/SIMPC8313.h
@@ -132,7 +132,6 @@
 #define CONFIG_MTD_NAND_VERIFY_WRITE
 #define CONFIG_CMD_NAND 		1
 #define CONFIG_NAND_FSL_ELBC		1
-#define CONFIG_SYS_64BIT_VSPRINTF	/* needed for nand_util.c */
 
 #define CONFIG_SYS_NAND_U_BOOT_SIZE	(512 << 10)
 #define CONFIG_SYS_NAND_U_BOOT_DST	0x00100000
diff --git a/include/configs/TQM8272.h b/include/configs/TQM8272.h
index 6eaa61d..12a7eda 100644
--- a/include/configs/TQM8272.h
+++ b/include/configs/TQM8272.h
@@ -442,8 +442,6 @@
 	WRITE_NAND(d, addr); \
 } while(0)
 
-#define CONFIG_SYS_64BIT_VSPRINTF	/* needed for nand_util.c */
-
 #endif /* CONFIG_CMD_NAND */
 
 #define	CONFIG_PCI
diff --git a/include/configs/TQM85xx.h b/include/configs/TQM85xx.h
index 1fbf4bf..d44fb07 100644
--- a/include/configs/TQM85xx.h
+++ b/include/configs/TQM85xx.h
@@ -372,8 +372,6 @@
 
 #define NAND_BIG_DELAY_US		25	/* max tR for Samsung devices	*/
 
-#define CONFIG_SYS_64BIT_VSPRINTF		/* needed for nand_util.c */
-
 #endif /* CONFIG_NAND */
 
 /*
diff --git a/include/configs/VOH405.h b/include/configs/VOH405.h
index 17397e8..38a1d0d 100644
--- a/include/configs/VOH405.h
+++ b/include/configs/VOH405.h
@@ -169,8 +169,6 @@
 #define CONFIG_SYS_NAND_SKIP_BAD_DOT_I 1       /* ".i" read skips bad blocks   */
 #define CONFIG_SYS_NAND_QUIET          1
 
-#define CONFIG_SYS_64BIT_VSPRINTF	/* needed for nand_util.c */
-
 /*-----------------------------------------------------------------------
  * PCI stuff
  *-----------------------------------------------------------------------
diff --git a/include/configs/WUH405.h b/include/configs/WUH405.h
index dbfa1aa..5c281a1 100644
--- a/include/configs/WUH405.h
+++ b/include/configs/WUH405.h
@@ -157,8 +157,6 @@
 
 #define CONFIG_SYS_NAND_SKIP_BAD_DOT_I      1  /* ".i" read skips bad blocks   */
 
-#define CONFIG_SYS_64BIT_VSPRINTF	/* needed for nand_util.c */
-
 /*-----------------------------------------------------------------------
  * PCI stuff
  *-----------------------------------------------------------------------
diff --git a/include/configs/XPEDITE5170.h b/include/configs/XPEDITE5170.h
index 1a810e4..c63fd42 100644
--- a/include/configs/XPEDITE5170.h
+++ b/include/configs/XPEDITE5170.h
@@ -239,9 +239,6 @@
 #define CONFIG_OF_BOARD_SETUP		1
 #define CONFIG_OF_STDOUT_VIA_ALIAS	1
 
-#define CONFIG_SYS_64BIT_VSPRINTF	1
-#define CONFIG_SYS_64BIT_STRTOUL	1
-
 /*
  * I2C
  */
diff --git a/include/configs/XPEDITE5200.h b/include/configs/XPEDITE5200.h
index 3f73780..1a56c60 100644
--- a/include/configs/XPEDITE5200.h
+++ b/include/configs/XPEDITE5200.h
@@ -213,9 +213,6 @@
 #define CONFIG_OF_BOARD_SETUP		1
 #define CONFIG_OF_STDOUT_VIA_ALIAS	1
 
-#define CONFIG_SYS_64BIT_VSPRINTF	1
-#define CONFIG_SYS_64BIT_STRTOUL	1
-
 /*
  * I2C
  */
diff --git a/include/configs/XPEDITE5370.h b/include/configs/XPEDITE5370.h
index 7782df3..7fd3668 100644
--- a/include/configs/XPEDITE5370.h
+++ b/include/configs/XPEDITE5370.h
@@ -244,9 +244,6 @@
 #define CONFIG_OF_BOARD_SETUP		1
 #define CONFIG_OF_STDOUT_VIA_ALIAS	1
 
-#define CONFIG_SYS_64BIT_VSPRINTF	1
-#define CONFIG_SYS_64BIT_STRTOUL	1
-
 /*
  * I2C
  */
diff --git a/include/configs/acadia.h b/include/configs/acadia.h
index 2fb48b6..bd3388f 100644
--- a/include/configs/acadia.h
+++ b/include/configs/acadia.h
@@ -266,8 +266,6 @@
 #define CONFIG_SYS_NAND_BASE		(CONFIG_SYS_NAND_ADDR + CONFIG_SYS_NAND_CS)
 #define CONFIG_SYS_NAND_SELECT_DEVICE  1	/* nand driver supports mutipl. chips	*/
 
-#define CONFIG_SYS_64BIT_VSPRINTF	/* needed for nand_util.c */
-
 /*-----------------------------------------------------------------------
  * External Bus Controller (EBC) Setup
  *----------------------------------------------------------------------*/
diff --git a/include/configs/afeb9260.h b/include/configs/afeb9260.h
index 74677d8..58b8c8c 100644
--- a/include/configs/afeb9260.h
+++ b/include/configs/afeb9260.h
@@ -107,7 +107,6 @@
 #define CONFIG_SYS_NAND_ENABLE_PIN		AT91_PIN_PC14
 #define CONFIG_SYS_NAND_READY_PIN		AT91_PIN_PC13
 
-#define CONFIG_SYS_64BIT_VSPRINTF		/* needed for nand_util.c */
 #endif
 
 /* NOR flash - no real flash on this board */
diff --git a/include/configs/apollon.h b/include/configs/apollon.h
index ddac5fb..adab454 100644
--- a/include/configs/apollon.h
+++ b/include/configs/apollon.h
@@ -258,8 +258,6 @@
 #define CONFIG_ENV_ADDR		0x00020000
 #define CONFIG_ENV_ADDR_FLEX	0x00040000
 
-#define CONFIG_SYS_64BIT_VSPRINTF		/* needed for nand_util.c */
-
 #ifdef CONFIG_SYS_USE_UBI
 #define CONFIG_CMD_MTDPARTS
 #define MTDIDS_DEFAULT		"onenand0=onenand"
diff --git a/include/configs/aria.h b/include/configs/aria.h
index 2938eac..f89fc57 100644
--- a/include/configs/aria.h
+++ b/include/configs/aria.h
@@ -251,8 +251,6 @@
 #define CONFIG_SYS_MAX_NAND_DEVICE	1
 #define NAND_MAX_CHIPS			CONFIG_SYS_MAX_NAND_DEVICE
 
-#define CONFIG_SYS_64BIT_VSPRINTF	/* needed for nand_util.c */
-
 /*
  * Configuration parameters for MPC5121 NAND driver
  */
diff --git a/include/configs/at91cap9adk.h b/include/configs/at91cap9adk.h
index cc194d8..322718f 100644
--- a/include/configs/at91cap9adk.h
+++ b/include/configs/at91cap9adk.h
@@ -131,7 +131,6 @@
 #define CONFIG_SYS_NAND_BASE			0x40000000
 #define CONFIG_SYS_NAND_DBW_8			1
 
-#define CONFIG_SYS_64BIT_VSPRINTF		/* needed for nand_util.c */
 #endif
 
 /* Ethernet */
diff --git a/include/configs/at91sam9260ek.h b/include/configs/at91sam9260ek.h
index 3507de2..0509011 100644
--- a/include/configs/at91sam9260ek.h
+++ b/include/configs/at91sam9260ek.h
@@ -123,7 +123,6 @@
 #define CONFIG_SYS_NAND_ENABLE_PIN		AT91_PIN_PC14
 #define CONFIG_SYS_NAND_READY_PIN		AT91_PIN_PC13
 
-#define CONFIG_SYS_64BIT_VSPRINTF		/* needed for nand_util.c */
 #endif
 
 /* NOR flash - no real flash on this board */
diff --git a/include/configs/at91sam9261ek.h b/include/configs/at91sam9261ek.h
index f86698f..fbf7389 100644
--- a/include/configs/at91sam9261ek.h
+++ b/include/configs/at91sam9261ek.h
@@ -133,7 +133,6 @@
 #define CONFIG_SYS_NAND_ENABLE_PIN		AT91_PIN_PC14
 #define CONFIG_SYS_NAND_READY_PIN		AT91_PIN_PC15
 
-#define CONFIG_SYS_64BIT_VSPRINTF		/* needed for nand_util.c */
 #endif
 
 /* NOR flash - no real flash on this board */
diff --git a/include/configs/at91sam9263ek.h b/include/configs/at91sam9263ek.h
index a1582fc..571351c 100644
--- a/include/configs/at91sam9263ek.h
+++ b/include/configs/at91sam9263ek.h
@@ -267,7 +267,6 @@
 #define CONFIG_SYS_NAND_ENABLE_PIN		AT91_PIN_PD15
 #define CONFIG_SYS_NAND_READY_PIN		AT91_PIN_PA22
 
-#define CONFIG_SYS_64BIT_VSPRINTF		/* needed for nand_util.c */
 #endif
 
 /* Ethernet */
diff --git a/include/configs/at91sam9m10g45ek.h b/include/configs/at91sam9m10g45ek.h
index b460188..06184e7 100644
--- a/include/configs/at91sam9m10g45ek.h
+++ b/include/configs/at91sam9m10g45ek.h
@@ -118,7 +118,6 @@
 /* NOR flash, if populated */
 #ifndef CONFIG_CMD_NAND
 #define CONFIG_SYS_NO_FLASH		1
-#define CONFIG_SYS_64BIT_VSPRINTF		/* needed for nand_util.c */
 #else
 #define CONFIG_SYS_FLASH_CFI		1
 #define CONFIG_FLASH_CFI_DRIVER		1
@@ -142,7 +141,6 @@
 #define CONFIG_SYS_NAND_ENABLE_PIN		AT91_PIN_PC14
 #define CONFIG_SYS_NAND_READY_PIN		AT91_PIN_PC8
 
-#define CONFIG_SYS_64BIT_VSPRINTF		/* needed for nand_util.c */
 #endif
 
 /* Ethernet */
diff --git a/include/configs/at91sam9rlek.h b/include/configs/at91sam9rlek.h
index b83266d..6fad75d 100644
--- a/include/configs/at91sam9rlek.h
+++ b/include/configs/at91sam9rlek.h
@@ -119,7 +119,6 @@
 #define CONFIG_SYS_NAND_ENABLE_PIN		AT91_PIN_PB6
 #define CONFIG_SYS_NAND_READY_PIN		AT91_PIN_PD17
 
-#define CONFIG_SYS_64BIT_VSPRINTF		/* needed for nand_util.c */
 #endif
 
 /* Ethernet - not present */
diff --git a/include/configs/bfin_adi_common.h b/include/configs/bfin_adi_common.h
index 0b87418..0fbd8f4 100644
--- a/include/configs/bfin_adi_common.h
+++ b/include/configs/bfin_adi_common.h
@@ -87,9 +87,6 @@
 #  define CONFIG_CMD_SPIBOOTLDR
 # endif
 #endif
-#ifdef CONFIG_CMD_NAND
-# define CONFIG_SYS_64BIT_VSPRINTF
-#endif
 
 /*
  * Console Settings
diff --git a/include/configs/cpu9260.h b/include/configs/cpu9260.h
index de8cfb7..4ef8566 100644
--- a/include/configs/cpu9260.h
+++ b/include/configs/cpu9260.h
@@ -295,7 +295,6 @@
 #define CONFIG_SYS_NAND_ENABLE_PIN		AT91_PIN_PC14
 #define CONFIG_SYS_NAND_MASK_ALE		(1 << 21)
 #define CONFIG_SYS_NAND_MASK_CLE		(1 << 22)
-#define CONFIG_SYS_64BIT_VSPRINTF		/* needed for nand_util.c */
 
 /* NOR flash */
 #define CONFIG_SYS_FLASH_CFI			1
diff --git a/include/configs/davinci_dm355evm.h b/include/configs/davinci_dm355evm.h
index ea40df0..d092fb8 100644
--- a/include/configs/davinci_dm355evm.h
+++ b/include/configs/davinci_dm355evm.h
@@ -69,7 +69,6 @@
 #define CONFIG_SYS_NAND_USE_FLASH_BBT
 #define CONFIG_SYS_NAND_4BIT_HW_ECC_OOBFIRST
 #define CONFIG_SYS_NAND_PAGE_2K
-#define CONFIG_SYS_64BIT_VSPRINTF	/* needed for nand_util.c */
 
 #define CONFIG_SYS_NAND_LARGEPAGE
 #define CONFIG_SYS_NAND_BASE_LIST	{ 0x02000000, }
diff --git a/include/configs/davinci_dm355leopard.h b/include/configs/davinci_dm355leopard.h
index 5db720e..ca3dea4 100644
--- a/include/configs/davinci_dm355leopard.h
+++ b/include/configs/davinci_dm355leopard.h
@@ -114,7 +114,6 @@
 #define CONFIG_ENV_SIZE		(256 << 10)	/* 256 KiB */
 #define CONFIG_ENV_IS_IN_NAND
 #define CONFIG_ENV_OFFSET	0x3C0000
-#define CONFIG_SYS_64BIT_VSPRINTF		/* needed for nand_util.c */
 #undef CONFIG_ENV_IS_IN_FLASH
 #define CONFIG_ENV_OVERWRITE
 #endif
diff --git a/include/configs/davinci_dm365evm.h b/include/configs/davinci_dm365evm.h
index 53a105b..4916077 100644
--- a/include/configs/davinci_dm365evm.h
+++ b/include/configs/davinci_dm365evm.h
@@ -77,7 +77,6 @@
 #define CONFIG_SYS_NAND_USE_FLASH_BBT
 #define CONFIG_SYS_NAND_4BIT_HW_ECC_OOBFIRST
 #define CONFIG_SYS_NAND_PAGE_2K
-#define CONFIG_SYS_64BIT_VSPRINTF	/* needed for nand_util.c */
 
 #define CONFIG_SYS_NAND_LARGEPAGE
 #define CONFIG_SYS_NAND_BASE_LIST	{ 0x02000000, }
diff --git a/include/configs/davinci_dm6467evm.h b/include/configs/davinci_dm6467evm.h
index 6617941..ce2d7c4 100644
--- a/include/configs/davinci_dm6467evm.h
+++ b/include/configs/davinci_dm6467evm.h
@@ -77,7 +77,6 @@
 #define CONFIG_NAND_DAVINCI
 #undef CONFIG_ENV_IS_IN_FLASH
 #define CONFIG_ENV_IS_IN_NAND
-#define CONFIG_SYS_64BIT_VSPRINTF	/* needed for nand_util.c */
 #define CONFIG_ENV_SIZE			(16 << 10)	/* 16 KiB */
 #define CONFIG_SYS_NAND_BASE_LIST	{0x42000000, }
 #define CONFIG_SYS_NAND_HW_ECC
diff --git a/include/configs/davinci_dvevm.h b/include/configs/davinci_dvevm.h
index b045e80..f7d2399 100644
--- a/include/configs/davinci_dvevm.h
+++ b/include/configs/davinci_dvevm.h
@@ -138,7 +138,6 @@
 #define CONFIG_SYS_NAND_HW_ECC
 #define CONFIG_SYS_MAX_NAND_DEVICE	1	/* Max number of NAND devices */
 #define CONFIG_ENV_OFFSET		0x0	/* Block 0--not used by bootcode */
-#define CONFIG_SYS_64BIT_VSPRINTF	/* needed for nand_util.c */
 #define DEF_BOOTM		""
 #elif defined(CONFIG_SYS_USE_NOR)
 #ifdef CONFIG_NOR_UART_BOOT
diff --git a/include/configs/davinci_schmoogie.h b/include/configs/davinci_schmoogie.h
index 9384cdd..47db2aa 100644
--- a/include/configs/davinci_schmoogie.h
+++ b/include/configs/davinci_schmoogie.h
@@ -92,7 +92,6 @@
 #define CONFIG_SYS_NAND_HW_ECC
 #define CONFIG_SYS_MAX_NAND_DEVICE	1	/* Max number of NAND devices */
 #define CONFIG_ENV_OFFSET		0x0	/* Block 0--not used by bootcode */
-#define CONFIG_SYS_64BIT_VSPRINTF		/* needed for nand_util.c */
 /*=====================*/
 /* Board related stuff */
 /*=====================*/
diff --git a/include/configs/davinci_sffsdr.h b/include/configs/davinci_sffsdr.h
index 71d48fb..f24eb7a 100644
--- a/include/configs/davinci_sffsdr.h
+++ b/include/configs/davinci_sffsdr.h
@@ -87,7 +87,6 @@
 #define CONFIG_SYS_NAND_HW_ECC
 #define CONFIG_SYS_MAX_NAND_DEVICE	1	/* Max number of NAND devices */
 #define CONFIG_ENV_OFFSET		0x0	/* Block 0--not used by bootcode */
-#define CONFIG_SYS_64BIT_VSPRINTF		/* needed for nand_util.c */
 /* I2C switch definitions for PCA9543 chip */
 #define CONFIG_SYS_I2C_PCA9543_ADDR		0x70
 #define CONFIG_SYS_I2C_PCA9543_ADDR_LEN	0	/* Single register. */
diff --git a/include/configs/davinci_sonata.h b/include/configs/davinci_sonata.h
index 9138b2b..5a55c56 100644
--- a/include/configs/davinci_sonata.h
+++ b/include/configs/davinci_sonata.h
@@ -125,7 +125,6 @@
 #define CONFIG_SYS_NAND_HW_ECC
 #define CONFIG_SYS_MAX_NAND_DEVICE	1	/* Max number of NAND devices */
 #define CONFIG_ENV_OFFSET		0x0	/* Block 0--not used by bootcode */
-#define CONFIG_SYS_64BIT_VSPRINTF	/* needed for nand_util.c */
 #define DEF_BOOTM		""
 #elif defined(CONFIG_SYS_USE_NOR)
 #ifdef CONFIG_NOR_UART_BOOT
diff --git a/include/configs/delta.h b/include/configs/delta.h
index 95e04f9..9c46c5b 100644
--- a/include/configs/delta.h
+++ b/include/configs/delta.h
@@ -226,8 +226,6 @@
 #define CONFIG_SYS_NAND_BASE_LIST	{ CONFIG_SYS_NAND0_BASE }
 #define CONFIG_SYS_MAX_NAND_DEVICE	1	/* Max number of NAND devices */
 
-#define CONFIG_SYS_64BIT_VSPRINTF		/* needed for nand_util.c */
-
 /* nand timeout values */
 #define CONFIG_SYS_NAND_PROG_ERASE_TO	3000
 #define CONFIG_SYS_NAND_OTHER_TO	100
diff --git a/include/configs/devkit8000.h b/include/configs/devkit8000.h
index 1011770..e81da67 100644
--- a/include/configs/devkit8000.h
+++ b/include/configs/devkit8000.h
@@ -132,8 +132,6 @@
 
 #define CONFIG_SYS_MAX_NAND_DEVICE	1		/* Max number of NAND */
 							/* devices */
-#define CONFIG_SYS_64BIT_VSPRINTF			/* needed for nand_util.c */
-
 #define CONFIG_JFFS2_NAND
 /* nand device jffs2 lives on */
 #define CONFIG_JFFS2_DEV		"nand0"
diff --git a/include/configs/keymile-common.h b/include/configs/keymile-common.h
index 80c41a4..2ef6a35 100644
--- a/include/configs/keymile-common.h
+++ b/include/configs/keymile-common.h
@@ -127,8 +127,6 @@
 
 #define CONFIG_SYS_MALLOC_LEN	(1024 * 1024)	/* Reserved for malloc */
 
-#define CONFIG_SYS_64BIT_VSPRINTF	/* needed for UBI/UBIFS */
-
 /* UBI Support for all Keymile boards */
 #define CONFIG_CMD_UBI
 #define CONFIG_RBTREE
diff --git a/include/configs/kilauea.h b/include/configs/kilauea.h
index 965599c..8d4ce8d 100644
--- a/include/configs/kilauea.h
+++ b/include/configs/kilauea.h
@@ -217,8 +217,6 @@
 #define CONFIG_SYS_NAND_BASE		(CONFIG_SYS_NAND_ADDR + CONFIG_SYS_NAND_CS)
 #define CONFIG_SYS_NAND_SELECT_DEVICE  1	/* nand driver supports mutipl. chips	*/
 
-#define CONFIG_SYS_64BIT_VSPRINTF	/* needed for nand_util.c */
-
 /*-----------------------------------------------------------------------
  * DDR SDRAM
  *----------------------------------------------------------------------*/
diff --git a/include/configs/mecp5123.h b/include/configs/mecp5123.h
index e194c8f..cccc31d 100644
--- a/include/configs/mecp5123.h
+++ b/include/configs/mecp5123.h
@@ -177,8 +177,6 @@
 #define CONFIG_SYS_MAX_NAND_DEVICE      1
 #define NAND_MAX_CHIPS                  CONFIG_SYS_MAX_NAND_DEVICE
 
-#define	CONFIG_SYS_64BIT_VSPRINTF	/* needed for nand_util.c */
-
 /*
  * Configuration parameters for MPC5121 NAND driver
  */
diff --git a/include/configs/meesc.h b/include/configs/meesc.h
index b996854..ab5cbca 100644
--- a/include/configs/meesc.h
+++ b/include/configs/meesc.h
@@ -121,7 +121,6 @@
 #define CONFIG_SYS_NAND_ENABLE_PIN		AT91_PIN_PD15
 #define CONFIG_SYS_NAND_READY_PIN		AT91_PIN_PA22
 
-#define CONFIG_SYS_64BIT_VSPRINTF		/* needed for nand_util.c */
 #endif
 
 /* Ethernet */
diff --git a/include/configs/mpc5121ads.h b/include/configs/mpc5121ads.h
index ebc518c..fb49388 100644
--- a/include/configs/mpc5121ads.h
+++ b/include/configs/mpc5121ads.h
@@ -239,8 +239,6 @@
 #define NAND_MAX_CHIPS                  CONFIG_SYS_MAX_NAND_DEVICE
 #define CONFIG_SYS_NAND_SELECT_DEVICE	/* driver supports mutipl. chips */
 
-#define	CONFIG_SYS_64BIT_VSPRINTF	/* needed for nand_util.c */
-
 /*
  * Configuration parameters for MPC5121 NAND driver
  */
diff --git a/include/configs/netstar.h b/include/configs/netstar.h
index 7bddf24..20b423b 100644
--- a/include/configs/netstar.h
+++ b/include/configs/netstar.h
@@ -111,8 +111,6 @@
 #define CONFIG_SYS_NAND_BASE		0x04000000 + (2 << 23)
 #define NAND_ALLOW_ERASE_ALL		1
 
-#define CONFIG_SYS_64BIT_VSPRINTF		/* needed for nand_util.c */
-
 #define CONFIG_HARD_I2C
 #define CONFIG_SYS_I2C_SPEED		100000
 #define CONFIG_SYS_I2C_SLAVE		1
diff --git a/include/configs/nhk8815.h b/include/configs/nhk8815.h
index a00c2fb..2b640dc 100644
--- a/include/configs/nhk8815.h
+++ b/include/configs/nhk8815.h
@@ -91,7 +91,6 @@
 #define CONFIG_SYS_MEMTEST_END		0x0FFFFFFF
 #define CONFIG_SYS_MALLOC_LEN		(CONFIG_ENV_SIZE + 256 * 1024)
 #define CONFIG_SYS_GBL_DATA_SIZE	128	/* for initial data */
-#define CONFIG_SYS_64BIT_VSPRINTF	/* mtd desires this */
 
 #define BOARD_LATE_INIT		/* call board_late_init during start up */
 
diff --git a/include/configs/omap3_beagle.h b/include/configs/omap3_beagle.h
index 024b9b8..a6fe5e1 100644
--- a/include/configs/omap3_beagle.h
+++ b/include/configs/omap3_beagle.h
@@ -151,8 +151,6 @@
 
 #define CONFIG_SYS_MAX_NAND_DEVICE	1		/* Max number of NAND */
 							/* devices */
-#define CONFIG_SYS_64BIT_VSPRINTF		/* needed for nand_util.c */
-
 #define CONFIG_JFFS2_NAND
 /* nand device jffs2 lives on */
 #define CONFIG_JFFS2_DEV		"nand0"
diff --git a/include/configs/omap3_evm.h b/include/configs/omap3_evm.h
index 6709edc..00093f8 100644
--- a/include/configs/omap3_evm.h
+++ b/include/configs/omap3_evm.h
@@ -146,8 +146,6 @@
 
 #define CONFIG_SYS_MAX_NAND_DEVICE	1		/* Max number of */
 							/* NAND devices */
-#define CONFIG_SYS_64BIT_VSPRINTF		/* needed for nand_util.c */
-
 #define CONFIG_JFFS2_NAND
 /* nand device jffs2 lives on */
 #define CONFIG_JFFS2_DEV		"nand0"
diff --git a/include/configs/omap3_overo.h b/include/configs/omap3_overo.h
index 0f812a7..0c12b9f 100644
--- a/include/configs/omap3_overo.h
+++ b/include/configs/omap3_overo.h
@@ -137,8 +137,6 @@
 
 #define CONFIG_SYS_MAX_NAND_DEVICE	1	/* Max number of NAND */
 						/* devices */
-#define CONFIG_SYS_64BIT_VSPRINTF		/* needed for nand_util.c */
-
 #define CONFIG_JFFS2_NAND
 /* nand device jffs2 lives on */
 #define CONFIG_JFFS2_DEV		"nand0"
diff --git a/include/configs/omap3_pandora.h b/include/configs/omap3_pandora.h
index 0cafeb8..154c0f4 100644
--- a/include/configs/omap3_pandora.h
+++ b/include/configs/omap3_pandora.h
@@ -140,9 +140,6 @@
 
 #define CONFIG_SYS_MAX_NAND_DEVICE	1	/* Max number of NAND */
 						/* devices */
-
-#define CONFIG_SYS_64BIT_VSPRINTF		/* needed for nand_util.c */
-
 #define CONFIG_JFFS2_NAND
 /* nand device jffs2 lives on */
 #define CONFIG_JFFS2_DEV		"nand0"
diff --git a/include/configs/omap3_zoom1.h b/include/configs/omap3_zoom1.h
index 2aef973..ef7a28b 100644
--- a/include/configs/omap3_zoom1.h
+++ b/include/configs/omap3_zoom1.h
@@ -147,9 +147,6 @@
 
 #define CONFIG_SYS_MAX_NAND_DEVICE	1		/* Max number of NAND */
 							/* devices */
-
-#define CONFIG_SYS_64BIT_VSPRINTF		/* needed for nand_util.c */
-
 #define CONFIG_JFFS2_NAND
 /* nand device jffs2 lives on */
 #define CONFIG_JFFS2_DEV		"nand0"
diff --git a/include/configs/omap3_zoom2.h b/include/configs/omap3_zoom2.h
index 5b03fb6..2b07666 100644
--- a/include/configs/omap3_zoom2.h
+++ b/include/configs/omap3_zoom2.h
@@ -167,8 +167,6 @@
 #define GPMC_NAND_ECC_LP_x16_LAYOUT	1
 #define CONFIG_SYS_MAX_NAND_DEVICE	1
 
-#define CONFIG_SYS_64BIT_VSPRINTF		/* needed for nand_util.c */
-
 /* Environment information */
 #define CONFIG_BOOTDELAY		10
 
diff --git a/include/configs/openrd_base.h b/include/configs/openrd_base.h
index 2aba0cb..88f27ba 100644
--- a/include/configs/openrd_base.h
+++ b/include/configs/openrd_base.h
@@ -114,7 +114,6 @@
 #define NAND_MAX_CHIPS			1
 #define CONFIG_SYS_NAND_BASE		0xD8000000	/* KW_DEFADR_NANDF */
 #define NAND_ALLOW_ERASE_ALL		1
-#define CONFIG_SYS_64BIT_VSPRINTF	/* needed for nand_util.c */
 #endif
 
 /*
diff --git a/include/configs/pdnb3.h b/include/configs/pdnb3.h
index 2612165..220f686 100644
--- a/include/configs/pdnb3.h
+++ b/include/configs/pdnb3.h
@@ -266,7 +266,6 @@
  */
 #define CONFIG_SYS_MAX_NAND_DEVICE	1
 #define CONFIG_SYS_NAND_BASE		0x51000000	/* NAND FLASH Base Address */
-#define CONFIG_SYS_64BIT_VSPRINTF			/* needed for nand_util.c */
 #endif
 
 /*
diff --git a/include/configs/pm9261.h b/include/configs/pm9261.h
index 9bf49ba..399d15f 100644
--- a/include/configs/pm9261.h
+++ b/include/configs/pm9261.h
@@ -236,9 +236,6 @@
 #define CONFIG_SYS_NAND_ENABLE_PIN		AT91_PIN_PC14
 #define CONFIG_SYS_NAND_READY_PIN		AT91_PIN_PA16
 
-#define CONFIG_SYS_64BIT_VSPRINTF		/* needed for nand_util.c */
-
-
 /* NOR flash */
 #define CONFIG_SYS_FLASH_CFI			1
 #define CONFIG_FLASH_CFI_DRIVER			1
diff --git a/include/configs/pm9263.h b/include/configs/pm9263.h
index 6761c18..0af1280 100644
--- a/include/configs/pm9263.h
+++ b/include/configs/pm9263.h
@@ -259,7 +259,6 @@
 #define CONFIG_SYS_NAND_ENABLE_PIN	AT91_PIN_PD15
 #define CONFIG_SYS_NAND_READY_PIN	AT91_PIN_PB30
 
-#define CONFIG_SYS_64BIT_VSPRINTF		/* needed for nand_util.c */
 #endif
 
 #define CONFIG_CMD_JFFS2		1
diff --git a/include/configs/quad100hd.h b/include/configs/quad100hd.h
index d63c43e..b08dcd4 100644
--- a/include/configs/quad100hd.h
+++ b/include/configs/quad100hd.h
@@ -226,7 +226,6 @@
 #define CONFIG_SYS_NAND_ALE	30   /* our ALE is GPIO30 */
 #define CONFIG_SYS_MAX_NAND_DEVICE	1
 
-#define CONFIG_SYS_64BIT_VSPRINTF	/* needed for nand_util.c */
 #endif
 
 /*-----------------------------------------------------------------------
diff --git a/include/configs/rd6281a.h b/include/configs/rd6281a.h
index 3f4d42c..3d8e25c 100644
--- a/include/configs/rd6281a.h
+++ b/include/configs/rd6281a.h
@@ -107,7 +107,6 @@
 #define NAND_MAX_CHIPS			1
 #define CONFIG_SYS_NAND_BASE		0xD8000000	/* KW_DEFADR_NANDF */
 #define NAND_ALLOW_ERASE_ALL		1
-#define CONFIG_SYS_64BIT_VSPRINTF	/* needed for nand_util.c */
 #endif
 
 /*
diff --git a/include/configs/sbc35_a9g20.h b/include/configs/sbc35_a9g20.h
index 7a2dcd8..f4b3477 100644
--- a/include/configs/sbc35_a9g20.h
+++ b/include/configs/sbc35_a9g20.h
@@ -161,7 +161,6 @@
 #define CONFIG_ENV_OFFSET		0x60000
 #define CONFIG_ENV_OFFSET_REDUND	0x80000
 #define CONFIG_ENV_SIZE			0x20000
-#define CONFIG_SYS_64BIT_VSPRINTF	/* needed for nand_util.c */
 #endif
 
 #define CONFIG_BOOTCOMMAND	"nboot 0x21000000 0 400000"
diff --git a/include/configs/sbc8641d.h b/include/configs/sbc8641d.h
index 682d241..315eebe7 100644
--- a/include/configs/sbc8641d.h
+++ b/include/configs/sbc8641d.h
@@ -285,9 +285,6 @@
 #define CONFIG_OF_BOARD_SETUP		1
 #define CONFIG_OF_STDOUT_VIA_ALIAS	1
 
-#define CONFIG_SYS_64BIT_VSPRINTF	1
-#define CONFIG_SYS_64BIT_STRTOUL	1
-
 /*
  * I2C
  */
diff --git a/include/configs/sc3.h b/include/configs/sc3.h
index d4697ad..a5eca39 100644
--- a/include/configs/sc3.h
+++ b/include/configs/sc3.h
@@ -422,8 +422,6 @@
 #define CONFIG_SYS_MAX_NAND_DEVICE	1
 #define CONFIG_SYS_NAND_BASE		0x77D00000
 
-#define CONFIG_SYS_64BIT_VSPRINTF	/* needed for nand_util.c */
-
 #define CONFIG_JFFS2_NAND 1			/* jffs2 on nand support */
 
 /* No command line, one static partition */
diff --git a/include/configs/sheevaplug.h b/include/configs/sheevaplug.h
index 1f95a3c..fc401a8 100644
--- a/include/configs/sheevaplug.h
+++ b/include/configs/sheevaplug.h
@@ -107,7 +107,6 @@
 #define NAND_MAX_CHIPS			1
 #define CONFIG_SYS_NAND_BASE		0xD8000000	/* KW_DEFADR_NANDF */
 #define NAND_ALLOW_ERASE_ALL		1
-#define CONFIG_SYS_64BIT_VSPRINTF	/* needed for nand_util.c */
 #endif
 
 /*
diff --git a/include/configs/smdk6400.h b/include/configs/smdk6400.h
index f644cd2..f04feae 100644
--- a/include/configs/smdk6400.h
+++ b/include/configs/smdk6400.h
@@ -268,8 +268,6 @@
 				 48, 49, 50, 51, 52, 53, 54, 55, \
 				 56, 57, 58, 59, 60, 61, 62, 63}
 
-#define CONFIG_SYS_64BIT_VSPRINTF		/* needed for nand_util.c */
-
 /* Boot configuration (define only one of next 3) */
 #define CONFIG_BOOT_NAND
 /* None of these are currently implemented. Left from the original Samsung
diff --git a/include/configs/smdkc100.h b/include/configs/smdkc100.h
index 8c472af..bf0ee67 100644
--- a/include/configs/smdkc100.h
+++ b/include/configs/smdkc100.h
@@ -213,8 +213,6 @@
 #define CONFIG_SYS_MONITOR_LEN		(256 << 10)	/* 256 KiB */
 #define CONFIG_IDENT_STRING		" for SMDKC100"
 
-#define CONFIG_SYS_64BIT_VSPRINTF
-
 #if !defined(CONFIG_NAND_SPL) && (TEXT_BASE >= 0xc0000000)
 #define CONFIG_ENABLE_MMU
 #endif
diff --git a/include/configs/socrates.h b/include/configs/socrates.h
index 3632b84..9641041 100644
--- a/include/configs/socrates.h
+++ b/include/configs/socrates.h
@@ -188,8 +188,6 @@
 #define CONFIG_SYS_MAX_NAND_DEVICE	1
 #define CONFIG_CMD_NAND
 
-#define CONFIG_SYS_64BIT_VSPRINTF	/* needed for nand_util.c */
-
 /* LIME GDC */
 #define CONFIG_SYS_LIME_BASE		0xc8000000
 #define CONFIG_SYS_LIME_SIZE		0x04000000	/* 64 MB	*/
diff --git a/include/configs/tny_a9260.h b/include/configs/tny_a9260.h
index 5b70a7b..4ad081b 100644
--- a/include/configs/tny_a9260.h
+++ b/include/configs/tny_a9260.h
@@ -138,7 +138,6 @@
 #define CONFIG_ENV_OFFSET 0x60000
 #define CONFIG_ENV_OFFSET_REDUND 0x80000
 #define CONFIG_ENV_SIZE 0x20000
-#define CONFIG_SYS_64BIT_VSPRINTF	/* needed for nand_util.c */
 #endif
 
 #define CONFIG_BOOTCOMMAND	"nboot 0x21000000 0 400000"
diff --git a/include/configs/vct.h b/include/configs/vct.h
index 20bf481..1b894a6 100644
--- a/include/configs/vct.h
+++ b/include/configs/vct.h
@@ -284,12 +284,6 @@
 #define CONFIG_BOOTDELAY	5	/* autoboot after 5 seconds	*/
 
 /*
- * Needed for 64bit printf format
- */
-#define CONFIG_SYS_64BIT_VSPRINTF	1
-#define CONFIG_SYS_64BIT_STRTOUL	1
-
-/*
  * UBI configuration
  */
 #if defined(CONFIG_VCT_ONENAND)
diff --git a/include/configs/zylonite.h b/include/configs/zylonite.h
index 36c341e..d0fc138 100644
--- a/include/configs/zylonite.h
+++ b/include/configs/zylonite.h
@@ -205,8 +205,6 @@
 #define CONFIG_SYS_NAND_SENDCMD_RETRY	3
 #undef NAND_ALLOW_ERASE_ALL	/* Allow erasing bad blocks - don't use */
 
-#define CONFIG_SYS_64BIT_VSPRINTF		/* needed for nand_util.c */
-
 /* NAND Timing Parameters (in ns) */
 #define NAND_TIMING_tCH		10
 #define NAND_TIMING_tCS		0
diff --git a/include/ppc4xx.h b/include/ppc4xx.h
index 5024db4..ee30a4c 100644
--- a/include/ppc4xx.h
+++ b/include/ppc4xx.h
@@ -100,12 +100,6 @@
 #endif /* 440EP/EPX 440GR/GRX 440SP/SPE 460EX/GT/SX 405EX*/
 
 #if defined(CONFIG_440)
-/*
- * Enable long long (%ll ...) printf format on 440 PPC's since most of
- * them support 36bit physical addressing
- */
-#define CONFIG_SYS_64BIT_VSPRINTF
-#define CONFIG_SYS_64BIT_STRTOUL
 #include <ppc440.h>
 #else
 #include <ppc405.h>
diff --git a/lib_generic/vsprintf.c b/lib_generic/vsprintf.c
index 3d95728..8c58a93 100644
--- a/lib_generic/vsprintf.c
+++ b/lib_generic/vsprintf.c
@@ -21,21 +21,10 @@
 extern int do_reset (cmd_tbl_t *cmdtp, int flag, int argc, char *argv[]);
 #endif
 
-#ifdef CONFIG_SYS_64BIT_VSPRINTF
 #include <div64.h>
 # define NUM_TYPE long long
-#else
-# define NUM_TYPE long
-#define do_div(n, base) ({ \
-	unsigned int __res; \
-	__res = ((unsigned NUM_TYPE) n) % base; \
-	n = ((unsigned NUM_TYPE) n) / base; \
-	__res; \
-})
-#endif
 #define noinline __attribute__((noinline))
 
-
 const char hex_asc[] = "0123456789abcdef";
 #define hex_asc_lo(x)   hex_asc[((x) & 0x0f)]
 #define hex_asc_hi(x)   hex_asc[((x) & 0xf0) >> 4]
@@ -104,7 +93,6 @@
 	return result;
 }
 
-#ifdef CONFIG_SYS_64BIT_STRTOUL
 unsigned long long simple_strtoull (const char *cp, char **endp, unsigned int base)
 {
 	unsigned long long result = 0, value;
@@ -132,7 +120,6 @@
 		*endp = (char *) cp;
 	return result;
 }
-#endif /* CONFIG_SYS_64BIT_STRTOUL */
 
 /* we use this so that we can do without the ctype library */
 #define is_digit(c)	((c) >= '0' && (c) <= '9')
@@ -631,12 +618,9 @@
 				--fmt;
 			continue;
 		}
-#ifdef CONFIG_SYS_64BIT_VSPRINTF
 		if (qualifier == 'L')  /* "quad" for 64 bit variables */
 			num = va_arg(args, unsigned long long);
-		else
-#endif
-		if (qualifier == 'l') {
+		else if (qualifier == 'l') {
 			num = va_arg(args, unsigned long);
 			if (flags & SIGN)
 				num = (signed long) num;