diff --git a/doc/I2C_Edge_Conditions b/doc/I2C_Edge_Conditions
index be7f1be..44d3478 100644
--- a/doc/I2C_Edge_Conditions
+++ b/doc/I2C_Edge_Conditions
@@ -28,7 +28,7 @@
 
 Notes
 -----
-!!!THIS IS AN UNDOCUMENTED I2C BUS BUG, NOT A IBM 4xx BUG!!!
+!!!THIS IS AN UNDOCUMENTED I2C BUS BUG, NOT A AMCC 4xx BUG!!!
 
 This reset edge condition could possibly be present in every I2C
 controller and device available. For boards where a I2C bus reset
diff --git a/doc/README.bedbug b/doc/README.bedbug
index 56aeb09..9cfb421 100644
--- a/doc/README.bedbug
+++ b/doc/README.bedbug
@@ -2,7 +2,7 @@
 --------------------------
 
 These changes implement the bedbug (emBEDded deBUGger) debugger in U-Boot.
-A specific implementation is made for the IBM405 processor but other flavors
+A specific implementation is made for the AMCC 405 processor but other flavors
 can be easily implemented.
 
 #####################
@@ -58,7 +58,7 @@
 	routines are common to all PowerPC processors.
 
 ./cpu/ppc4xx/bedbug_405.c
-	IBM PPC405 specific debugger routines.
+	AMCC  PPC405 specific debugger routines.
 
 
 Bedbug support for the MPC860
diff --git a/doc/README.ebony b/doc/README.ebony
index 6e2a811..8b030db 100644
--- a/doc/README.ebony
+++ b/doc/README.ebony
@@ -1,9 +1,9 @@
-			   IBM Ebony Board
+			   AMCC Ebony Board
 
 		    Last Update: September 12, 2002
 =======================================================================
 
-This file contains some handy info regarding U-Boot and the IBM
+This file contains some handy info regarding U-Boot and the AMCC
 Ebony evalutation board. See the README.ppc440 for additional
 information.
 
diff --git a/doc/README.ml300 b/doc/README.ml300
index c9ef6e6..27c5b92 100644
--- a/doc/README.ml300
+++ b/doc/README.ml300
@@ -5,7 +5,7 @@
 ---------------
 
 The Xilinx ML300 board is based on the Virtex-II Pro FPGA with
-integrated IBM PowerPC 405 core. The board is normally booted from
+integrated AMCC PowerPC 405 core. The board is normally booted from
 System ACE CF. U-Boot is then run out of main memory.
 
 An FPGA is a configurable and thus very flexible device. To
diff --git a/doc/README.mpc85xxads b/doc/README.mpc85xxads
index 08d6831..f0cf782 100644
--- a/doc/README.mpc85xxads
+++ b/doc/README.mpc85xxads
@@ -130,7 +130,7 @@
 	include/configs/MPC8540ADS.h
 	include/configs/MPC8560ADS.h
 
-    CONFIG_BOOKE	    BOOKE(e.g. Motorola MPC85xx, IBM 440, etc)
+    CONFIG_BOOKE	    BOOKE(e.g. Motorola MPC85xx, AMCC 440, etc)
     CONFIG_E500		    BOOKE e500 family(Motorola)
     CONFIG_MPC85xx	    MPC8540,MPC8560 and their derivatives
     CONFIG_MPC8540	    MPC8540 specific
diff --git a/doc/README.ocotea b/doc/README.ocotea
index 403735d..9ac3a18 100644
--- a/doc/README.ocotea
+++ b/doc/README.ocotea
@@ -1,9 +1,9 @@
-			   IBM Ocotea Board
+			   AMCC Ocotea Board
 
 		    Last Update: March 2, 2004
 =======================================================================
 
-This file contains some handy info regarding U-Boot and the IBM
+This file contains some handy info regarding U-Boot and the AMCC
 Ocotea 440gx  evalutation board. See the README.ppc440 for additional
 information.
 
@@ -53,7 +53,7 @@
 	This has been done in the 440gx_enet.c file with a #ifdef/endif
 	pair.
 
-IBM does not store the EMAC ethernet addresses within their PIBS bootloader.
+AMCC does not store the EMAC ethernet addresses within their PIBS bootloader.
 The addresses contained in the config header file are from my particular
 board and you _*should*_ change them to reflect your board either in the
 config file and/or in your environment variables.  I found the addresses on
diff --git a/doc/README.ocotea-PIBS-to-U-Boot b/doc/README.ocotea-PIBS-to-U-Boot
index 0044aa0..25dd2a2 100644
--- a/doc/README.ocotea-PIBS-to-U-Boot
+++ b/doc/README.ocotea-PIBS-to-U-Boot
@@ -75,8 +75,8 @@
 
 U-Boot 1.1.3 (Apr  5 2005 - 22:59:57)
 
-IBM PowerPC 440 GX Rev. C
-Board: IBM 440GX Evaluation Board
+AMCC PowerPC 440 GX Rev. C
+Board: AMCC 440GX Evaluation Board
 	VCO: 1066 MHz
 	CPU: 533 MHz
 	PLB: 152 MHz
diff --git a/doc/README.ppc440 b/doc/README.ppc440
index 95d63fc..08f34f5 100644
--- a/doc/README.ppc440
+++ b/doc/README.ppc440
@@ -12,7 +12,7 @@
 405gp code. A sample board support implementation is contained
 in the board/ebony directory.
 
-All testing was performed using the IBM Ebony board using both
+All testing was performed using the AMCC Ebony board using both
 Rev B and Rev C silicon. However, since the Rev B. silicon has
 extensive errata, support for Rev B. is minimal (it boots, and
 features such as i2c, pci, tftpboot, etc. seem to work ok).