| /* |
| * Configuation settings for the Renesas R7780MP board |
| * |
| * Copyright (C) 2007,2008 Nobuhiro Iwamatsu <iwamatsu@nigauri.org> |
| * Copyright (C) 2008 Yusuke Goda <goda.yusuke@renesas.com> |
| * |
| * See file CREDITS for list of people who contributed to this |
| * project. |
| * |
| * This program is free software; you can redistribute it and/or |
| * modify it under the terms of the GNU General Public License as |
| * published by the Free Software Foundation; either version 2 of |
| * the License, or (at your option) any later version. |
| * |
| * This program is distributed in the hope that it will be useful, |
| * but WITHOUT ANY WARRANTY; without even the implied warranty of |
| * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the |
| * GNU General Public License for more details. |
| * |
| * You should have received a copy of the GNU General Public License |
| * along with this program; if not, write to the Free Software |
| * Foundation, Inc., 59 Temple Place, Suite 330, Boston, |
| * MA 02111-1307 USA |
| */ |
| |
| #ifndef __R7780RP_H |
| #define __R7780RP_H |
| |
| #undef DEBUG |
| #define CONFIG_SH 1 |
| #define CONFIG_SH4A 1 |
| #define CONFIG_CPU_SH7780 1 |
| #define CONFIG_R7780MP 1 |
| #define CFG_R7780MP_OLD_FLASH 1 |
| #define __LITTLE_ENDIAN__ 1 |
| |
| /* |
| * Command line configuration. |
| */ |
| #define CONFIG_CMD_SDRAM |
| #define CONFIG_CMD_FLASH |
| #define CONFIG_CMD_MEMORY |
| #define CONFIG_CMD_PCI |
| #define CONFIG_CMD_NET |
| #define CONFIG_CMD_PING |
| #define CONFIG_CMD_ENV |
| #define CONFIG_CMD_NFS |
| #define CONFIG_CMD_IDE |
| #define CONFIG_CMD_EXT2 |
| #define CONFIG_DOS_PARTITION |
| |
| #define CONFIG_SCIF_CONSOLE 1 |
| #define CONFIG_BAUDRATE 115200 |
| #define CONFIG_CONS_SCIF0 1 |
| |
| #define CONFIG_BOOTDELAY 3 |
| #define CONFIG_BOOTARGS "console=ttySC0,115200" |
| #define CONFIG_ENV_OVERWRITE 1 |
| |
| /* check for keypress on bootdelay==0 */ |
| /*#define CONFIG_ZERO_BOOTDELAY_CHECK*/ |
| |
| #define CFG_SDRAM_BASE (0x08000000) |
| #define CFG_SDRAM_SIZE (128 * 1024 * 1024) |
| |
| #define CFG_LONGHELP |
| #define CFG_PROMPT "=> " |
| #define CFG_CBSIZE 256 |
| #define CFG_PBSIZE 256 |
| #define CFG_MAXARGS 16 |
| #define CFG_BARGSIZE 512 |
| /* List of legal baudrate settings for this board */ |
| #define CFG_BAUDRATE_TABLE { 115200, 57600, 38400, 19200, 9600 } |
| |
| #define CFG_MEMTEST_START (CFG_SDRAM_BASE) |
| #define CFG_MEMTEST_END (TEXT_BASE - 0x100000) |
| |
| /* Flash board support */ |
| #define CFG_FLASH_BASE (0xA0000000) |
| #ifdef CFG_R7780MP_OLD_FLASH |
| /* NOR Flash (S29PL127J60TFI130) */ |
| # define CFG_FLASH_CFI_WIDTH FLASH_CFI_32BIT |
| # define CFG_MAX_FLASH_BANKS (2) |
| # define CFG_MAX_FLASH_SECT 270 |
| # define CFG_FLASH_BANKS_LIST { CFG_FLASH_BASE,\ |
| CFG_FLASH_BASE + 0x100000,\ |
| CFG_FLASH_BASE + 0x400000,\ |
| CFG_FLASH_BASE + 0x700000, } |
| #else /* CFG_R7780MP_OLD_FLASH */ |
| /* NOR Flash (Spantion S29GL256P) */ |
| # define CFG_MAX_FLASH_BANKS (1) |
| # define CFG_MAX_FLASH_SECT 256 |
| # define CFG_FLASH_BANKS_LIST { CFG_FLASH_BASE } |
| #endif /* CFG_R7780MP_OLD_FLASH */ |
| |
| #define CFG_LOAD_ADDR (CFG_SDRAM_BASE + 4 * 1024 * 1024) |
| /* Address of u-boot image in Flash */ |
| #define CFG_MONITOR_BASE (CFG_FLASH_BASE) |
| #define CFG_MONITOR_LEN (256 * 1024) |
| /* Size of DRAM reserved for malloc() use */ |
| #define CFG_MALLOC_LEN (1204 * 1024) |
| |
| /* size in bytes reserved for initial data */ |
| #define CFG_GBL_DATA_SIZE (256) |
| #define CFG_BOOTMAPSZ (8 * 1024 * 1024) |
| #define CFG_RX_ETH_BUFFER (8) |
| |
| #define CFG_FLASH_CFI |
| #define CFG_FLASH_CFI_DRIVER |
| #undef CFG_FLASH_CFI_BROKEN_TABLE |
| #undef CFG_FLASH_QUIET_TEST |
| /* print 'E' for empty sector on flinfo */ |
| #define CFG_FLASH_EMPTY_INFO |
| |
| #define CFG_ENV_IS_IN_FLASH |
| #define CFG_ENV_SECT_SIZE (256 * 1024) |
| #define CFG_ENV_SIZE (CFG_ENV_SECT_SIZE) |
| #define CFG_ENV_ADDR (CFG_MONITOR_BASE + CFG_MONITOR_LEN) |
| #define CFG_FLASH_ERASE_TOUT 120000 |
| #define CFG_FLASH_WRITE_TOUT 500 |
| |
| /* Board Clock */ |
| #define CONFIG_SYS_CLK_FREQ 33333333 |
| #define TMU_CLK_DIVIDER 4 |
| #define CFG_HZ (CONFIG_SYS_CLK_FREQ / TMU_CLK_DIVIDER) |
| |
| /* PCI Controller */ |
| #if defined(CONFIG_CMD_PCI) |
| #define CONFIG_PCI |
| #define CONFIG_SH4_PCI |
| #define CONFIG_SH7780_PCI |
| #define CONFIG_PCI_PNP |
| #define CONFIG_PCI_SCAN_SHOW 1 |
| #define __io |
| #define __mem_pci |
| |
| #define CONFIG_PCI_MEM_BUS 0xFD000000 /* Memory space base addr */ |
| #define CONFIG_PCI_MEM_PHYS CONFIG_PCI_MEM_BUS |
| #define CONFIG_PCI_MEM_SIZE 0x01000000 /* Size of Memory window */ |
| |
| #define CONFIG_PCI_IO_BUS 0xFE200000 /* IO space base address */ |
| #define CONFIG_PCI_IO_PHYS CONFIG_PCI_IO_BUS |
| #define CONFIG_PCI_IO_SIZE 0x00200000 /* Size of IO window */ |
| #endif /* CONFIG_CMD_PCI */ |
| |
| #if defined(CONFIG_CMD_NET) |
| /* |
| #define CONFIG_NET_MULTI |
| #define CONFIG_RTL8169 |
| */ |
| /* AX88696L Support(NE2000 base chip) */ |
| #define CONFIG_DRIVER_NE2000 |
| #define CONFIG_DRIVER_AX88796L |
| #define CONFIG_DRIVER_NE2000_BASE 0xA4100000 |
| #endif |
| |
| /* Compact flash Support */ |
| #if defined(CONFIG_CMD_IDE) |
| #define CONFIG_IDE_RESET 1 |
| #define CFG_PIO_MODE 1 |
| #define CFG_IDE_MAXBUS 1 /* IDE bus */ |
| #define CFG_IDE_MAXDEVICE 1 |
| #define CFG_ATA_BASE_ADDR 0xb4000000 |
| #define CFG_ATA_STRIDE 2 /* 1bit shift */ |
| #define CFG_ATA_DATA_OFFSET 0x1000 /* data reg offset */ |
| #define CFG_ATA_REG_OFFSET 0x1000 /* reg offset */ |
| #define CFG_ATA_ALT_OFFSET 0x800 /* alternate register offset */ |
| #endif /* CONFIG_CMD_IDE */ |
| |
| #endif /* __R7780RP_H */ |