gpio: generalize for all generic gpio providers
The Blackfin gpio command isn't terribly Blackfin-specific. So generalize
the few pieces into two new optional helpers:
name_to_gpio() - turn a string name into a GPIO #
gpio_status() - display current pin bindings (think /proc/gpio)
Once these pieces are pulled out, we can relocate the cmd_gpio.c into the
common directory.
Signed-off-by: Mike Frysinger <vapier@gentoo.org>
diff --git a/arch/blackfin/cpu/Makefile b/arch/blackfin/cpu/Makefile
index 4a9e577..df10f1b 100644
--- a/arch/blackfin/cpu/Makefile
+++ b/arch/blackfin/cpu/Makefile
@@ -18,7 +18,6 @@
SEXTRA := start.o
SOBJS := interrupt.o cache.o
COBJS-$(CONFIG_BOOTCOUNT_LIMIT) += bootcount.o
-COBJS-$(CONFIG_CMD_GPIO) += cmd_gpio.o
COBJS-y += cpu.o
COBJS-y += gpio.o
COBJS-y += interrupts.o
diff --git a/arch/blackfin/cpu/cmd_gpio.c b/arch/blackfin/cpu/cmd_gpio.c
deleted file mode 100644
index e96413b..0000000
--- a/arch/blackfin/cpu/cmd_gpio.c
+++ /dev/null
@@ -1,118 +0,0 @@
-/*
- * Control GPIO pins on the fly
- *
- * Copyright (c) 2008-2010 Analog Devices Inc.
- *
- * Licensed under the GPL-2 or later.
- */
-
-#include <common.h>
-#include <command.h>
-#include <linux/ctype.h>
-
-#include <asm/blackfin.h>
-#include <asm/gpio.h>
-
-enum {
- GPIO_INPUT,
- GPIO_SET,
- GPIO_CLEAR,
- GPIO_TOGGLE,
-};
-
-int do_gpio(cmd_tbl_t *cmdtp, int flag, int argc, char * const argv[])
-{
- if (argc == 2 && !strcmp(argv[1], "status")) {
- bfin_gpio_labels();
- return 0;
- }
-
- if (argc != 3)
- show_usage:
- return cmd_usage(cmdtp);
-
- /* parse the behavior */
- ulong sub_cmd;
- switch (argv[1][0]) {
- case 'i': sub_cmd = GPIO_INPUT; break;
- case 's': sub_cmd = GPIO_SET; break;
- case 'c': sub_cmd = GPIO_CLEAR; break;
- case 't': sub_cmd = GPIO_TOGGLE; break;
- default: goto show_usage;
- }
-
- /* parse the pin with format: [p][port]<#> */
- const char *str_pin = argv[2];
-
- /* grab the [p]<port> portion */
- ulong port_base;
- if (tolower(*str_pin) == 'p') ++str_pin;
- switch (tolower(*str_pin)) {
-#ifdef GPIO_PA0
- case 'a': port_base = GPIO_PA0; break;
-#endif
-#ifdef GPIO_PB0
- case 'b': port_base = GPIO_PB0; break;
-#endif
-#ifdef GPIO_PC0
- case 'c': port_base = GPIO_PC0; break;
-#endif
-#ifdef GPIO_PD0
- case 'd': port_base = GPIO_PD0; break;
-#endif
-#ifdef GPIO_PE0
- case 'e': port_base = GPIO_PE0; break;
-#endif
-#ifdef GPIO_PF0
- case 'f': port_base = GPIO_PF0; break;
-#endif
-#ifdef GPIO_PG0
- case 'g': port_base = GPIO_PG0; break;
-#endif
-#ifdef GPIO_PH0
- case 'h': port_base = GPIO_PH0; break;
-#endif
-#ifdef GPIO_PI0
- case 'i': port_base = GPIO_PI0; break;
-#endif
-#ifdef GPIO_PJ
- case 'j': port_base = GPIO_PJ0; break;
-#endif
- default: goto show_usage;
- }
-
- /* grab the <#> portion */
- ulong pin = simple_strtoul(str_pin + 1, NULL, 10);
- if (pin > 15)
- goto show_usage;
-
- /* grab the pin before we tweak it */
- ulong gpio = port_base + pin;
- gpio_request(gpio, "cmd_gpio");
-
- /* finally, let's do it: set direction and exec command */
- ulong value;
- if (sub_cmd == GPIO_INPUT) {
- gpio_direction_input(gpio);
- value = gpio_get_value(gpio);
- } else {
- switch (sub_cmd) {
- case GPIO_SET: value = 1; break;
- case GPIO_CLEAR: value = 0; break;
- case GPIO_TOGGLE: value = !gpio_get_value(gpio); break;
- default: goto show_usage;
- }
- gpio_direction_output(gpio, value);
- }
- printf("gpio: pin %lu on port %c (gpio %lu) value is %lu\n",
- pin, *str_pin, gpio, value);
-
- gpio_free(gpio);
-
- return value;
-}
-
-U_BOOT_CMD(gpio, 3, 0, do_gpio,
- "input/set/clear/toggle gpio output pins",
- "<input|set|clear|toggle> <port><pin>\n"
- " - input/set/clear/toggle the specified pin (e.g. PF10)");
diff --git a/arch/blackfin/include/asm/gpio.h b/arch/blackfin/include/asm/gpio.h
index b650ef0..9c0e5d1 100644
--- a/arch/blackfin/include/asm/gpio.h
+++ b/arch/blackfin/include/asm/gpio.h
@@ -196,6 +196,59 @@
return number >= 0 && number < MAX_BLACKFIN_GPIOS;
}
+#include <linux/ctype.h>
+
+static inline int name_to_gpio(const char *name)
+{
+ int port_base;
+
+ if (tolower(*name) == 'p') {
+ ++name;
+
+ switch (tolower(*name)) {
+#ifdef GPIO_PA0
+ case 'a': port_base = GPIO_PA0; break;
+#endif
+#ifdef GPIO_PB0
+ case 'b': port_base = GPIO_PB0; break;
+#endif
+#ifdef GPIO_PC0
+ case 'c': port_base = GPIO_PC0; break;
+#endif
+#ifdef GPIO_PD0
+ case 'd': port_base = GPIO_PD0; break;
+#endif
+#ifdef GPIO_PE0
+ case 'e': port_base = GPIO_PE0; break;
+#endif
+#ifdef GPIO_PF0
+ case 'f': port_base = GPIO_PF0; break;
+#endif
+#ifdef GPIO_PG0
+ case 'g': port_base = GPIO_PG0; break;
+#endif
+#ifdef GPIO_PH0
+ case 'h': port_base = GPIO_PH0; break;
+#endif
+#ifdef GPIO_PI0
+ case 'i': port_base = GPIO_PI0; break;
+#endif
+#ifdef GPIO_PJ
+ case 'j': port_base = GPIO_PJ0; break;
+#endif
+ default: return -1;
+ }
+
+ ++name;
+ } else
+ port_base = 0;
+
+ return port_base + simple_strtoul(name, NULL, 10);
+}
+#define name_to_gpio(n) name_to_gpio(n)
+
+#define gpio_status() bfin_gpio_labels()
+
#endif /* __ASSEMBLY__ */
#endif /* __ARCH_BLACKFIN_GPIO_H__ */