arm, davinci: Rename AM1808 lowlevel functions to DA850
Rename arch/arm/cpu/arm926ejs/davinci/am1808_lowlevel.c and
arch/arm/include/asm/arch-davinci/am1808_lowlevel.h to da850_lowlevel.c
and da850_lowlevel.h since they apply not only to the AM1808 SoC
but to all DA850 chips. The function names and #defines are changed
likewise.
Signed-off-by: Christian Riesch <christian.riesch@omicron.at>
Cc: Heiko Schocher <hs@denx.de>
Cc: Paulraj Sandeep <s-paulraj@ti.com>
Cc: Albert ARIBAUD <albert.u.boot@aribaud.net>
Acked-by: Heiko Schocher <hs@denx.de>
Signed-off-by: Sandeep Paulraj <s-paulraj@ti.com>
diff --git a/arch/arm/cpu/arm926ejs/davinci/Makefile b/arch/arm/cpu/arm926ejs/davinci/Makefile
index 98c7e55..aeb058a 100644
--- a/arch/arm/cpu/arm926ejs/davinci/Makefile
+++ b/arch/arm/cpu/arm926ejs/davinci/Makefile
@@ -28,7 +28,7 @@
LIB = $(obj)lib$(SOC).o
COBJS-y += cpu.o timer.o psc.o
-COBJS-$(CONFIG_AM18018_LOWLEVEL) += am1808_lowlevel.o
+COBJS-$(CONFIG_DA850_LOWLEVEL) += da850_lowlevel.o
COBJS-$(CONFIG_SOC_DM355) += dm355.o
COBJS-$(CONFIG_SOC_DM365) += dm365.o
COBJS-$(CONFIG_SOC_DM644X) += dm644x.o
diff --git a/arch/arm/cpu/arm926ejs/davinci/am1808_lowlevel.c b/arch/arm/cpu/arm926ejs/davinci/da850_lowlevel.c
similarity index 70%
rename from arch/arm/cpu/arm926ejs/davinci/am1808_lowlevel.c
rename to arch/arm/cpu/arm926ejs/davinci/da850_lowlevel.c
index 1ea4a9f..a6f0178 100644
--- a/arch/arm/cpu/arm926ejs/davinci/am1808_lowlevel.c
+++ b/arch/arm/cpu/arm926ejs/davinci/da850_lowlevel.c
@@ -1,5 +1,5 @@
/*
- * SoC-specific lowlevel code for AM1808 and similar chips
+ * SoC-specific lowlevel code for DA850
*
* Copyright (C) 2011
* Heiko Schocher, DENX Software Engineering, hs@denx.de.
@@ -25,12 +25,12 @@
#include <nand.h>
#include <ns16550.h>
#include <post.h>
-#include <asm/arch/am1808_lowlevel.h>
+#include <asm/arch/da850_lowlevel.h>
#include <asm/arch/hardware.h>
#include <asm/arch/ddr2_defs.h>
#include <asm/arch/emif_defs.h>
-void am1808_waitloop(unsigned long loopcnt)
+void da850_waitloop(unsigned long loopcnt)
{
unsigned long i;
@@ -38,7 +38,7 @@
asm(" NOP");
}
-int am1808_pll_init(struct davinci_pllc_regs *reg, unsigned long pllmult)
+int da850_pll_init(struct davinci_pllc_regs *reg, unsigned long pllmult)
{
if (reg == davinci_pllc0_regs)
/* Unlock PLL registers. */
@@ -55,7 +55,7 @@
/* Set PLLEN=0 => PLL BYPASS MODE */
clrbits_le32(®->pllctl, 0x00000001);
- am1808_waitloop(150);
+ da850_waitloop(150);
if (reg == davinci_pllc0_regs) {
/*
@@ -87,10 +87,10 @@
/* program the postdiv */
if (reg == davinci_pllc0_regs)
- writel((0x8000 | CONFIG_SYS_AM1808_PLL0_POSTDIV),
+ writel((0x8000 | CONFIG_SYS_DA850_PLL0_POSTDIV),
®->postdiv);
else
- writel((0x8000 | CONFIG_SYS_AM1808_PLL1_POSTDIV),
+ writel((0x8000 | CONFIG_SYS_DA850_PLL1_POSTDIV),
®->postdiv);
/*
@@ -101,17 +101,17 @@
;
if (reg == davinci_pllc0_regs) {
- writel(CONFIG_SYS_AM1808_PLL0_PLLDIV1, ®->plldiv1);
- writel(CONFIG_SYS_AM1808_PLL0_PLLDIV2, ®->plldiv2);
- writel(CONFIG_SYS_AM1808_PLL0_PLLDIV3, ®->plldiv3);
- writel(CONFIG_SYS_AM1808_PLL0_PLLDIV4, ®->plldiv4);
- writel(CONFIG_SYS_AM1808_PLL0_PLLDIV5, ®->plldiv5);
- writel(CONFIG_SYS_AM1808_PLL0_PLLDIV6, ®->plldiv6);
- writel(CONFIG_SYS_AM1808_PLL0_PLLDIV7, ®->plldiv7);
+ writel(CONFIG_SYS_DA850_PLL0_PLLDIV1, ®->plldiv1);
+ writel(CONFIG_SYS_DA850_PLL0_PLLDIV2, ®->plldiv2);
+ writel(CONFIG_SYS_DA850_PLL0_PLLDIV3, ®->plldiv3);
+ writel(CONFIG_SYS_DA850_PLL0_PLLDIV4, ®->plldiv4);
+ writel(CONFIG_SYS_DA850_PLL0_PLLDIV5, ®->plldiv5);
+ writel(CONFIG_SYS_DA850_PLL0_PLLDIV6, ®->plldiv6);
+ writel(CONFIG_SYS_DA850_PLL0_PLLDIV7, ®->plldiv7);
} else {
- writel(CONFIG_SYS_AM1808_PLL1_PLLDIV1, ®->plldiv1);
- writel(CONFIG_SYS_AM1808_PLL1_PLLDIV2, ®->plldiv2);
- writel(CONFIG_SYS_AM1808_PLL1_PLLDIV3, ®->plldiv3);
+ writel(CONFIG_SYS_DA850_PLL1_PLLDIV1, ®->plldiv1);
+ writel(CONFIG_SYS_DA850_PLL1_PLLDIV2, ®->plldiv2);
+ writel(CONFIG_SYS_DA850_PLL1_PLLDIV3, ®->plldiv3);
}
/*
@@ -128,13 +128,13 @@
;
/* Wait for PLL to reset properly. See PLL spec for PLL reset time */
- am1808_waitloop(200);
+ da850_waitloop(200);
/* Set the PLLRST bit in PLLCTL to 1 to bring the PLL out of reset */
setbits_le32(®->pllctl, 0x00000008);
/* Wait for PLL to lock. See PLL spec for PLL lock time */
- am1808_waitloop(2400);
+ da850_waitloop(2400);
/*
* Set the PLLEN bit in PLLCTL to 1 to remove the PLL from bypass
@@ -153,7 +153,7 @@
return 0;
}
-void am1808_lpc_transition(unsigned char pscnum, unsigned char module,
+void da850_lpc_transition(unsigned char pscnum, unsigned char module,
unsigned char domain, unsigned char state)
{
struct davinci_psc_regs *reg;
@@ -190,12 +190,12 @@
;
}
-int am1808_ddr_setup(unsigned int freq)
+int da850_ddr_setup(unsigned int freq)
{
unsigned long tmp;
/* Enable the Clock to DDR2/mDDR */
- am1808_lpc_transition(1, 6, 0, PSC_ENABLE);
+ da850_lpc_transition(1, 6, 0, PSC_ENABLE);
tmp = readl(&davinci_syscfg1_regs->vtpio_ctl);
if ((tmp & VTP_POWERDWN) == VTP_POWERDWN) {
@@ -217,19 +217,19 @@
setbits_le32(&davinci_syscfg1_regs->vtpio_ctl, VTP_IOPWRDWN);
}
- writel(CONFIG_SYS_AM1808_DDR2_DDRPHYCR, &dv_ddr2_regs_ctrl->ddrphycr);
+ writel(CONFIG_SYS_DA850_DDR2_DDRPHYCR, &dv_ddr2_regs_ctrl->ddrphycr);
clrbits_le32(&davinci_syscfg1_regs->ddr_slew,
(1 << DDR_SLEW_CMOSEN_BIT));
setbits_le32(&dv_ddr2_regs_ctrl->sdbcr, DV_DDR_BOOTUNLOCK);
- writel((CONFIG_SYS_AM1808_DDR2_SDBCR & ~0xf0000000) |
+ writel((CONFIG_SYS_DA850_DDR2_SDBCR & ~0xf0000000) |
(readl(&dv_ddr2_regs_ctrl->sdbcr) & 0xf0000000), /*rsv Bytes*/
&dv_ddr2_regs_ctrl->sdbcr);
- writel(CONFIG_SYS_AM1808_DDR2_SDBCR2, &dv_ddr2_regs_ctrl->sdbcr2);
+ writel(CONFIG_SYS_DA850_DDR2_SDBCR2, &dv_ddr2_regs_ctrl->sdbcr2);
- writel(CONFIG_SYS_AM1808_DDR2_SDTIMR, &dv_ddr2_regs_ctrl->sdtimr);
- writel(CONFIG_SYS_AM1808_DDR2_SDTIMR2, &dv_ddr2_regs_ctrl->sdtimr2);
+ writel(CONFIG_SYS_DA850_DDR2_SDTIMR, &dv_ddr2_regs_ctrl->sdtimr);
+ writel(CONFIG_SYS_DA850_DDR2_SDTIMR2, &dv_ddr2_regs_ctrl->sdtimr2);
clrbits_le32(&dv_ddr2_regs_ctrl->sdbcr,
(1 << DV_DDR_SDCR_TIMUNLOCK_SHIFT));
@@ -238,15 +238,15 @@
* LPMODEN and MCLKSTOPEN must be set!
* Without this bits set, PSC don;t switch states !!
*/
- writel(CONFIG_SYS_AM1808_DDR2_SDRCR |
+ writel(CONFIG_SYS_DA850_DDR2_SDRCR |
(1 << DV_DDR_SRCR_LPMODEN_SHIFT) |
(1 << DV_DDR_SRCR_MCLKSTOPEN_SHIFT),
&dv_ddr2_regs_ctrl->sdrcr);
/* SyncReset the Clock to EMIF3A SDRAM */
- am1808_lpc_transition(1, 6, 0, PSC_SYNCRESET);
+ da850_lpc_transition(1, 6, 0, PSC_SYNCRESET);
/* Enable the Clock to EMIF3A SDRAM */
- am1808_lpc_transition(1, 6, 0, PSC_ENABLE);
+ da850_lpc_transition(1, 6, 0, PSC_ENABLE);
/* disable self refresh */
clrbits_le32(&dv_ddr2_regs_ctrl->sdrcr, 0xc0000000);
@@ -255,13 +255,13 @@
return 0;
}
-static void am1808_set_mdctl(dv_reg_p mdctl)
+static void da850_set_mdctl(dv_reg_p mdctl)
{
if ((readl(mdctl) & 0x1F) != PSC_ENABLE)
writel(((readl(mdctl) & 0xFFFFFFE0) | PSC_ENABLE), mdctl);
}
-void am1808_psc_init(void)
+void da850_psc_init(void)
{
struct davinci_psc_regs *reg;
int i;
@@ -272,10 +272,10 @@
;
for (i = 3; i <= 4 ; i++)
- am1808_set_mdctl(®->psc0.mdctl[i]);
+ da850_set_mdctl(®->psc0.mdctl[i]);
for (i = 7; i <= 12 ; i++)
- am1808_set_mdctl(®->psc0.mdctl[i]);
+ da850_set_mdctl(®->psc0.mdctl[i]);
/* Do Always-On Power Domain Transitions */
setbits_le32(®->ptcmd, 0x00000001);
@@ -287,15 +287,15 @@
while ((readl(®->ptstat) & 0x00000001))
;
- am1808_set_mdctl(®->psc1.mdctl[3]);
- am1808_set_mdctl(®->psc1.mdctl[6]);
+ da850_set_mdctl(®->psc1.mdctl[3]);
+ da850_set_mdctl(®->psc1.mdctl[6]);
/* UART1 + UART2 */
for (i = 12 ; i <= 13 ; i++)
- am1808_set_mdctl(®->psc1.mdctl[i]);
+ da850_set_mdctl(®->psc1.mdctl[i]);
- am1808_set_mdctl(®->psc1.mdctl[26]);
- am1808_set_mdctl(®->psc1.mdctl[31]);
+ da850_set_mdctl(®->psc1.mdctl[26]);
+ da850_set_mdctl(®->psc1.mdctl[31]);
/* Do Always-On Power Domain Transitions */
setbits_le32(®->ptcmd, 0x00000001);
@@ -303,7 +303,7 @@
;
}
-void am1808_pinmux_ctl(unsigned long offset, unsigned long mask,
+void da850_pinmux_ctl(unsigned long offset, unsigned long mask,
unsigned long value)
{
clrbits_le32(&davinci_syscfg_regs->pinmux[offset], mask);
@@ -369,42 +369,42 @@
((1 << 27) | (1 << 22) | (1 << 20) | (1 << 5) | (1 << 16)));
/* System PSC setup - enable all */
- am1808_psc_init();
+ da850_psc_init();
/* Setup Pinmux */
- am1808_pinmux_ctl(0, 0xFFFFFFFF, CONFIG_SYS_AM1808_PINMUX0);
- am1808_pinmux_ctl(1, 0xFFFFFFFF, CONFIG_SYS_AM1808_PINMUX1);
- am1808_pinmux_ctl(2, 0xFFFFFFFF, CONFIG_SYS_AM1808_PINMUX2);
- am1808_pinmux_ctl(3, 0xFFFFFFFF, CONFIG_SYS_AM1808_PINMUX3);
- am1808_pinmux_ctl(4, 0xFFFFFFFF, CONFIG_SYS_AM1808_PINMUX4);
- am1808_pinmux_ctl(5, 0xFFFFFFFF, CONFIG_SYS_AM1808_PINMUX5);
- am1808_pinmux_ctl(6, 0xFFFFFFFF, CONFIG_SYS_AM1808_PINMUX6);
- am1808_pinmux_ctl(7, 0xFFFFFFFF, CONFIG_SYS_AM1808_PINMUX7);
- am1808_pinmux_ctl(8, 0xFFFFFFFF, CONFIG_SYS_AM1808_PINMUX8);
- am1808_pinmux_ctl(9, 0xFFFFFFFF, CONFIG_SYS_AM1808_PINMUX9);
- am1808_pinmux_ctl(10, 0xFFFFFFFF, CONFIG_SYS_AM1808_PINMUX10);
- am1808_pinmux_ctl(11, 0xFFFFFFFF, CONFIG_SYS_AM1808_PINMUX11);
- am1808_pinmux_ctl(12, 0xFFFFFFFF, CONFIG_SYS_AM1808_PINMUX12);
- am1808_pinmux_ctl(13, 0xFFFFFFFF, CONFIG_SYS_AM1808_PINMUX13);
- am1808_pinmux_ctl(14, 0xFFFFFFFF, CONFIG_SYS_AM1808_PINMUX14);
- am1808_pinmux_ctl(15, 0xFFFFFFFF, CONFIG_SYS_AM1808_PINMUX15);
- am1808_pinmux_ctl(16, 0xFFFFFFFF, CONFIG_SYS_AM1808_PINMUX16);
- am1808_pinmux_ctl(17, 0xFFFFFFFF, CONFIG_SYS_AM1808_PINMUX17);
- am1808_pinmux_ctl(18, 0xFFFFFFFF, CONFIG_SYS_AM1808_PINMUX18);
- am1808_pinmux_ctl(19, 0xFFFFFFFF, CONFIG_SYS_AM1808_PINMUX19);
+ da850_pinmux_ctl(0, 0xFFFFFFFF, CONFIG_SYS_DA850_PINMUX0);
+ da850_pinmux_ctl(1, 0xFFFFFFFF, CONFIG_SYS_DA850_PINMUX1);
+ da850_pinmux_ctl(2, 0xFFFFFFFF, CONFIG_SYS_DA850_PINMUX2);
+ da850_pinmux_ctl(3, 0xFFFFFFFF, CONFIG_SYS_DA850_PINMUX3);
+ da850_pinmux_ctl(4, 0xFFFFFFFF, CONFIG_SYS_DA850_PINMUX4);
+ da850_pinmux_ctl(5, 0xFFFFFFFF, CONFIG_SYS_DA850_PINMUX5);
+ da850_pinmux_ctl(6, 0xFFFFFFFF, CONFIG_SYS_DA850_PINMUX6);
+ da850_pinmux_ctl(7, 0xFFFFFFFF, CONFIG_SYS_DA850_PINMUX7);
+ da850_pinmux_ctl(8, 0xFFFFFFFF, CONFIG_SYS_DA850_PINMUX8);
+ da850_pinmux_ctl(9, 0xFFFFFFFF, CONFIG_SYS_DA850_PINMUX9);
+ da850_pinmux_ctl(10, 0xFFFFFFFF, CONFIG_SYS_DA850_PINMUX10);
+ da850_pinmux_ctl(11, 0xFFFFFFFF, CONFIG_SYS_DA850_PINMUX11);
+ da850_pinmux_ctl(12, 0xFFFFFFFF, CONFIG_SYS_DA850_PINMUX12);
+ da850_pinmux_ctl(13, 0xFFFFFFFF, CONFIG_SYS_DA850_PINMUX13);
+ da850_pinmux_ctl(14, 0xFFFFFFFF, CONFIG_SYS_DA850_PINMUX14);
+ da850_pinmux_ctl(15, 0xFFFFFFFF, CONFIG_SYS_DA850_PINMUX15);
+ da850_pinmux_ctl(16, 0xFFFFFFFF, CONFIG_SYS_DA850_PINMUX16);
+ da850_pinmux_ctl(17, 0xFFFFFFFF, CONFIG_SYS_DA850_PINMUX17);
+ da850_pinmux_ctl(18, 0xFFFFFFFF, CONFIG_SYS_DA850_PINMUX18);
+ da850_pinmux_ctl(19, 0xFFFFFFFF, CONFIG_SYS_DA850_PINMUX19);
/* PLL setup */
- am1808_pll_init(davinci_pllc0_regs, CONFIG_SYS_AM1808_PLL0_PLLM);
- am1808_pll_init(davinci_pllc1_regs, CONFIG_SYS_AM1808_PLL1_PLLM);
+ da850_pll_init(davinci_pllc0_regs, CONFIG_SYS_DA850_PLL0_PLLM);
+ da850_pll_init(davinci_pllc1_regs, CONFIG_SYS_DA850_PLL1_PLLM);
/* GPIO setup */
board_gpio_init();
/* setup CSn config */
- writel(CONFIG_SYS_AM1808_CS2CFG, &davinci_emif_regs->ab1cr);
- writel(CONFIG_SYS_AM1808_CS3CFG, &davinci_emif_regs->ab2cr);
+ writel(CONFIG_SYS_DA850_CS2CFG, &davinci_emif_regs->ab1cr);
+ writel(CONFIG_SYS_DA850_CS3CFG, &davinci_emif_regs->ab2cr);
- am1808_lpc_transition(1, 13, 0, PSC_ENABLE);
+ da850_lpc_transition(1, 13, 0, PSC_ENABLE);
NS16550_init((NS16550_t)(CONFIG_SYS_NS16550_COM1),
CONFIG_SYS_NS16550_CLK / 16 / CONFIG_BAUDRATE);
@@ -416,13 +416,13 @@
(CONFIG_SYS_NS16550_COM1 + 0x30));
#if defined(CONFIG_NAND_SPL)
puts("ddr init\n");
- am1808_ddr_setup(132);
+ da850_ddr_setup(132);
puts("boot u-boot ...\n");
nand_boot();
#else
- am1808_ddr_setup(132);
+ da850_ddr_setup(132);
return 0;
#endif
}
diff --git a/arch/arm/include/asm/arch-davinci/am1808_lowlevel.h b/arch/arm/include/asm/arch-davinci/da850_lowlevel.h
similarity index 63%
rename from arch/arm/include/asm/arch-davinci/am1808_lowlevel.h
rename to arch/arm/include/asm/arch-davinci/da850_lowlevel.h
index 0bc7f76..22a92a3 100644
--- a/arch/arm/include/asm/arch-davinci/am1808_lowlevel.h
+++ b/arch/arm/include/asm/arch-davinci/da850_lowlevel.h
@@ -1,5 +1,5 @@
/*
- * SoC-specific lowlevel code for AM1808 and similar chips
+ * SoC-specific lowlevel code for DA850
*
* Copyright (C) 2011
* Heiko Schocher, DENX Software Engineering, hs@denx.de.
@@ -21,24 +21,24 @@
* along with this program; if not, write to the Free Software
* Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.
*/
-#ifndef __AM1808_LOWLEVEL_H
-#define __AM1808_LOWLEVEL_H
+#ifndef __DA850_LOWLEVEL_H
+#define __DA850_LOWLEVEL_H
/* NOR Boot Configuration Word Field Descriptions */
-#define AM1808_NORBOOT_COPY_XK(X) ((X - 1) << 8)
-#define AM1808_NORBOOT_METHOD_DIRECT (1 << 4)
-#define AM1808_NORBOOT_16BIT (1 << 0)
+#define DA850_NORBOOT_COPY_XK(X) ((X - 1) << 8)
+#define DA850_NORBOOT_METHOD_DIRECT (1 << 4)
+#define DA850_NORBOOT_16BIT (1 << 0)
#define dv_maskbits(addr, val) \
writel((readl(addr) & val), addr)
-void am1808_waitloop(unsigned long loopcnt);
-int am1808_pll_init(struct davinci_pllc_regs *reg, unsigned long pllmult);
-void am1808_lpc_transition(unsigned char pscnum, unsigned char module,
+void da850_waitloop(unsigned long loopcnt);
+int da850_pll_init(struct davinci_pllc_regs *reg, unsigned long pllmult);
+void da850_lpc_transition(unsigned char pscnum, unsigned char module,
unsigned char domain, unsigned char state);
-int am1808_ddr_setup(unsigned int freq);
-void am1808_psc_init(void);
-void am1808_pinmux_ctl(unsigned long offset, unsigned long mask,
+int da850_ddr_setup(unsigned int freq);
+void da850_psc_init(void);
+void da850_pinmux_ctl(unsigned long offset, unsigned long mask,
unsigned long value);
-#endif /* #ifndef __AM1808_LOWLEVEL_H */
+#endif /* #ifndef __DA850_LOWLEVEL_H */