// SPDX-License-Identifier: (GPL-2.0 OR MIT)
/* Copyright (c) 2021 Tianrui Wei <tianrui-wei@outlook.com> */

/*
 * This dts is for a dual core instance of OpenPiton+Ariane built
 * to run on a Digilent Genesys 2 FPGA at 66.67MHz. These files
 * are automatically generated by the OpenPiton build system and
 * this configuration may not be what you need if your configuration
 * is different from the below.
 */

/dts-v1/;

/ {
	#address-cells = <2>;
	#size-cells = <2>;
	compatible = "openpiton,riscv64";

	chosen {
	   stdout-path = "uart0:115200";
	};

	aliases {
		console = &uart0;
		serial0 = &uart0;
	};

	cpus {
		#address-cells = <1>;
		#size-cells = <0>;
		timebase-frequency = <520835>;

		CPU0: cpu@0 {
			clocks = <&clk0>;
			u-boot,dm-spl;
			device_type = "cpu";
			reg = <0>;
			compatible = "openhwgroup,cva6", "riscv";
			riscv,isa = "rv64imafdc";
			mmu-type = "riscv,sv39";
			tlb-split;
			// HLIC - hart local interrupt controller
			CPU0_intc: interrupt-controller {
				#interrupt-cells = <1>;
				interrupt-controller;
				compatible = "riscv,cpu-intc";
			};
		};

		CPU1: cpu@1 {
			clocks = <&clk0>;
			device_type = "cpu";
			reg = <1>;
			compatible = "openhwgroup,cva6", "riscv";
			riscv,isa = "rv64imafdc";
			mmu-type = "riscv,sv39";
			tlb-split;
			// HLIC - hart local interrupt controller
			CPU1_intc: interrupt-controller {
				#interrupt-cells = <1>;
				interrupt-controller;
				compatible = "riscv,cpu-intc";
			};
		};

	};

	clocks {
		clk0: osc {
			compatible = "fixed-clock";
			#clock-cells = <0>;
			clock-frequency = <66667000>;
		};
	};

	memory@80000000 {
		u-boot,dm-spl;
		device_type = "memory";
		reg = < 0x00000000 0x80000000 0x00000000 0x40000000 >;
	};

	soc {
		#address-cells = <2>;
		#size-cells = <2>;
		compatible = "openpiton,chipset", "simple-bus";
		ranges;

		uart0: uart@fff0c2c000 {
			compatible = "ns16550", "openpiton,ns16550";
			reg = < 0x000000ff 0xf0c2c000 0x00000000 0x000d4000 >;
			interrupt-parent = <&PLIC0>;
			interrupts = <1>;
			reg-shift = <0>;
			// regs are spaced on 8 bit boundary
		};

		eth: ethernet@fff0d00000 {
			compatible = "xlnx,xps-ethernetlite-1.00.a", "openpiton,ethernet";
			device_type = "network";
			reg = < 0x000000ff 0xf0d00000 0x00000000 0x00100000 >;
			interrupt-parent = <&PLIC0>;
			interrupts = <2>;
			phy-handle = <&phy0>;
			xlnx,duplex = <0x1>;
			xlnx,include-global-buffers = <0x1>;
			xlnx,include-internal-loopback = <0x0>;
			xlnx,include-mdio = <0x1>;
			xlnx,rx-ping-pong = <0x1>;
			xlnx,s-axi-id-width = <0x1>;
			xlnx,tx-ping-pong = <0x1>;
			xlnx,use-internal = <0x0>;
			axi_ethernetlite_0_mdio: mdio {
				#address-cells = <1>;
				#size-cells = <0>;
				phy0: phy@1 {
					compatible = "ethernet-phy-id001C.C915";
					device_type = "ethernet-phy";
					reg = <1>;
				};
			};
		};

		sdhci_0: sdhci@f000000000 {
			u-boot,dm-spl;
			compatible = "openpiton,piton-mmc", "openpiton,mmc";
			reg = < 0x000000f0 0x00000000 0x00000000 0x00300000 >;
		};

		clint@fff1020000 {
			compatible = "sifive,clint0", "openpiton,clint";
			interrupts-extended = < &CPU0_intc 3
									&CPU0_intc 7
									&CPU1_intc 3
									&CPU1_intc 7 >;
			reg = < 0x000000ff 0xf1020000 0x00000000 0x000c0000 >;
			clocks = <&clk0>;
		};

		PLIC0: plic@fff1100000 {
			u-boot,dm-spl;
			#interrupt-cells = <1>;
			compatible = "sifive,plic-1.0.0", "openpiton,plic";
			interrupt-controller;
			interrupts-extended = < &CPU0_intc 11
									&CPU0_intc 9
									&CPU1_intc 11
									&CPU1_intc 9 >;
			reg = < 0x000000ff 0xf1100000 0x00000000 0x04000000 >;
			riscv,max-priority = <7>;
			riscv,ndev = <2>;
		};
	};
};