imx: ventana: split read_eeprom into standalone file
Split the read_eeprom function out so that it can be shared (ie with SPL)
Cc: Stefan Roese <sr@denx.de>
Cc: Otavio Salvador <otavio@ossystems.com.br>
Cc: Andy Ng <andreas2025@gmail.com>
Cc: Eric Nelson <eric.nelson@boundarydevices.com>
Cc: Tapani Utriainen <tapani@technexion.com>
Cc: Tom Rini <trini@ti.com>
Signed-off-by: Tim Harvey <tharvey@gateworks.com>
diff --git a/board/gateworks/gw_ventana/gw_ventana.c b/board/gateworks/gw_ventana/gw_ventana.c
index 031367d..a39374d 100644
--- a/board/gateworks/gw_ventana/gw_ventana.c
+++ b/board/gateworks/gw_ventana/gw_ventana.c
@@ -84,15 +84,6 @@
*/
static struct ventana_board_info ventana_info;
-enum {
- GW54proto, /* original GW5400-A prototype */
- GW51xx,
- GW52xx,
- GW53xx,
- GW54xx,
- GW_UNKNOWN,
-};
-
int board_type;
/* UART1: Function varies per baseboard */
@@ -499,84 +490,6 @@
}
#endif /* CONFIG_VIDEO_IPUV3 */
-/* read ventana EEPROM, check for validity, and return baseboard type */
-static int
-read_eeprom(void)
-{
- int i;
- int chksum;
- char baseboard;
- int type;
- struct ventana_board_info *info = &ventana_info;
- unsigned char *buf = (unsigned char *)&ventana_info;
-
- memset(info, 0, sizeof(ventana_info));
-
- /*
- * On a board with a missing/depleted backup battery for GSC, the
- * board may be ready to probe the GSC before its firmware is
- * running. We will wait here indefinately for the GSC/EEPROM.
- */
- while (1) {
- if (0 == i2c_set_bus_num(I2C_GSC) &&
- 0 == i2c_probe(GSC_EEPROM_ADDR))
- break;
- mdelay(1);
- }
-
- /* read eeprom config section */
- if (gsc_i2c_read(GSC_EEPROM_ADDR, 0x00, 1, buf, sizeof(ventana_info))) {
- puts("EEPROM: Failed to read EEPROM\n");
- info->model[0] = 0;
- return GW_UNKNOWN;
- }
-
- /* sanity checks */
- if (info->model[0] != 'G' || info->model[1] != 'W') {
- puts("EEPROM: Invalid Model in EEPROM\n");
- info->model[0] = 0;
- return GW_UNKNOWN;
- }
-
- /* validate checksum */
- for (chksum = 0, i = 0; i < sizeof(*info)-2; i++)
- chksum += buf[i];
- if ((info->chksum[0] != chksum>>8) ||
- (info->chksum[1] != (chksum&0xff))) {
- puts("EEPROM: Failed EEPROM checksum\n");
- info->model[0] = 0;
- return GW_UNKNOWN;
- }
-
- /* original GW5400-A prototype */
- baseboard = info->model[3];
- if (strncasecmp((const char *)info->model, "GW5400-A", 8) == 0)
- baseboard = '0';
-
- switch (baseboard) {
- case '0': /* original GW5400-A prototype */
- type = GW54proto;
- break;
- case '1':
- type = GW51xx;
- break;
- case '2':
- type = GW52xx;
- break;
- case '3':
- type = GW53xx;
- break;
- case '4':
- type = GW54xx;
- break;
- default:
- printf("EEPROM: Unknown model in EEPROM: %s\n", info->model);
- type = GW_UNKNOWN;
- break;
- }
- return type;
-}
-
/*
* Baseboard specific GPIO
*/
@@ -1114,7 +1027,7 @@
setup_sata();
#endif
/* read Gateworks EEPROM into global struct (used later) */
- board_type = read_eeprom();
+ board_type = read_eeprom(I2C_GSC, &ventana_info);
/* board-specifc GPIO iomux */
if (board_type < GW_UNKNOWN) {