| // SPDX-License-Identifier: GPL-2.0+ |
| /* |
| * Copyright (C) 2017 Vasily Khoruzhick <anarsoul@gmail.com> |
| */ |
| |
| #include <common.h> |
| #include <dm.h> |
| #include <errno.h> |
| #include <i2c.h> |
| #include <edid.h> |
| #include <log.h> |
| #include <video_bridge.h> |
| #include <linux/delay.h> |
| #include "../anx98xx-edp.h" |
| |
| #define DP_MAX_LINK_RATE 0x001 |
| #define DP_MAX_LANE_COUNT 0x002 |
| #define DP_MAX_LANE_COUNT_MASK 0x1f |
| |
| struct anx6345_priv { |
| u8 edid[EDID_SIZE]; |
| }; |
| |
| static int anx6345_write(struct udevice *dev, unsigned int addr_off, |
| unsigned char reg_addr, unsigned char value) |
| { |
| uint8_t buf[2]; |
| struct i2c_msg msg; |
| int ret; |
| |
| msg.addr = addr_off; |
| msg.flags = 0; |
| buf[0] = reg_addr; |
| buf[1] = value; |
| msg.buf = buf; |
| msg.len = 2; |
| ret = dm_i2c_xfer(dev, &msg, 1); |
| if (ret) { |
| debug("%s: write failed, reg=%#x, value=%#x, ret=%d\n", |
| __func__, reg_addr, value, ret); |
| return ret; |
| } |
| |
| return 0; |
| } |
| |
| static int anx6345_read(struct udevice *dev, unsigned int addr_off, |
| unsigned char reg_addr, unsigned char *value) |
| { |
| uint8_t addr, val; |
| struct i2c_msg msg[2]; |
| int ret; |
| |
| msg[0].addr = addr_off; |
| msg[0].flags = 0; |
| addr = reg_addr; |
| msg[0].buf = &addr; |
| msg[0].len = 1; |
| msg[1].addr = addr_off; |
| msg[1].flags = I2C_M_RD; |
| msg[1].buf = &val; |
| msg[1].len = 1; |
| ret = dm_i2c_xfer(dev, msg, 2); |
| if (ret) { |
| debug("%s: read failed, reg=%.2x, value=%p, ret=%d\n", |
| __func__, (int)reg_addr, value, ret); |
| return ret; |
| } |
| *value = val; |
| |
| return 0; |
| } |
| |
| static int anx6345_write_r0(struct udevice *dev, unsigned char reg_addr, |
| unsigned char value) |
| { |
| struct dm_i2c_chip *chip = dev_get_parent_platdata(dev); |
| |
| return anx6345_write(dev, chip->chip_addr, reg_addr, value); |
| } |
| |
| static int anx6345_read_r0(struct udevice *dev, unsigned char reg_addr, |
| unsigned char *value) |
| { |
| struct dm_i2c_chip *chip = dev_get_parent_platdata(dev); |
| |
| return anx6345_read(dev, chip->chip_addr, reg_addr, value); |
| } |
| |
| static int anx6345_write_r1(struct udevice *dev, unsigned char reg_addr, |
| unsigned char value) |
| { |
| struct dm_i2c_chip *chip = dev_get_parent_platdata(dev); |
| |
| return anx6345_write(dev, chip->chip_addr + 1, reg_addr, value); |
| } |
| |
| static int anx6345_read_r1(struct udevice *dev, unsigned char reg_addr, |
| unsigned char *value) |
| { |
| struct dm_i2c_chip *chip = dev_get_parent_platdata(dev); |
| |
| return anx6345_read(dev, chip->chip_addr + 1, reg_addr, value); |
| } |
| |
| static int anx6345_set_backlight(struct udevice *dev, int percent) |
| { |
| return -ENOSYS; |
| } |
| |
| static int anx6345_aux_wait(struct udevice *dev) |
| { |
| int ret = -ETIMEDOUT; |
| u8 v; |
| int retries = 1000; |
| |
| do { |
| anx6345_read_r0(dev, ANX9804_DP_AUX_CH_CTL_2, &v); |
| if (!(v & ANX9804_AUX_EN)) { |
| ret = 0; |
| break; |
| } |
| udelay(100); |
| } while (retries--); |
| |
| if (ret) { |
| debug("%s: timed out waiting for AUX_EN to clear\n", __func__); |
| return ret; |
| } |
| |
| ret = -ETIMEDOUT; |
| retries = 1000; |
| do { |
| anx6345_read_r1(dev, ANX9804_DP_INT_STA, &v); |
| if (v & ANX9804_RPLY_RECEIV) { |
| ret = 0; |
| break; |
| } |
| udelay(100); |
| } while (retries--); |
| |
| if (ret) { |
| debug("%s: timed out waiting to receive reply\n", __func__); |
| return ret; |
| } |
| |
| /* Clear RPLY_RECEIV bit */ |
| anx6345_write_r1(dev, ANX9804_DP_INT_STA, v); |
| |
| anx6345_read_r0(dev, ANX9804_AUX_CH_STA, &v); |
| if ((v & ANX9804_AUX_STATUS_MASK) != 0) { |
| debug("AUX status: %d\n", v & ANX9804_AUX_STATUS_MASK); |
| ret = -EIO; |
| } |
| |
| return ret; |
| } |
| |
| static void anx6345_aux_addr(struct udevice *dev, u32 addr) |
| { |
| u8 val; |
| |
| val = addr & 0xff; |
| anx6345_write_r0(dev, ANX9804_DP_AUX_ADDR_7_0, val); |
| val = (addr >> 8) & 0xff; |
| anx6345_write_r0(dev, ANX9804_DP_AUX_ADDR_15_8, val); |
| val = (addr >> 16) & 0x0f; |
| anx6345_write_r0(dev, ANX9804_DP_AUX_ADDR_19_16, val); |
| } |
| |
| static int anx6345_aux_transfer(struct udevice *dev, u8 req, |
| u32 addr, u8 *buf, size_t len) |
| { |
| int i, ret; |
| u8 ctrl1 = req; |
| u8 ctrl2 = ANX9804_AUX_EN; |
| |
| if (len > 16) |
| return -E2BIG; |
| |
| if (len) |
| ctrl1 |= ANX9804_AUX_LENGTH(len); |
| else |
| ctrl2 |= ANX9804_ADDR_ONLY; |
| |
| if (len && !(req & ANX9804_AUX_TX_COMM_READ)) { |
| for (i = 0; i < len; i++) |
| anx6345_write_r0(dev, ANX9804_BUF_DATA_0 + i, buf[i]); |
| } |
| |
| anx6345_aux_addr(dev, addr); |
| anx6345_write_r0(dev, ANX9804_DP_AUX_CH_CTL_1, ctrl1); |
| anx6345_write_r0(dev, ANX9804_DP_AUX_CH_CTL_2, ctrl2); |
| ret = anx6345_aux_wait(dev); |
| if (ret) { |
| debug("AUX transaction timed out\n"); |
| return ret; |
| } |
| |
| if (len && (req & ANX9804_AUX_TX_COMM_READ)) { |
| for (i = 0; i < len; i++) |
| anx6345_read_r0(dev, ANX9804_BUF_DATA_0 + i, &buf[i]); |
| } |
| |
| return 0; |
| } |
| |
| static int anx6345_read_aux_i2c(struct udevice *dev, u8 chip_addr, |
| u8 offset, size_t count, u8 *buf) |
| { |
| int i, ret; |
| size_t cur_cnt; |
| u8 cur_offset; |
| |
| for (i = 0; i < count; i += 16) { |
| cur_cnt = (count - i) > 16 ? 16 : count - i; |
| cur_offset = offset + i; |
| ret = anx6345_aux_transfer(dev, ANX9804_AUX_TX_COMM_MOT, |
| chip_addr, &cur_offset, 1); |
| if (ret) { |
| debug("%s: failed to set i2c offset: %d\n", |
| __func__, ret); |
| return ret; |
| } |
| ret = anx6345_aux_transfer(dev, ANX9804_AUX_TX_COMM_READ, |
| chip_addr, buf + i, cur_cnt); |
| if (ret) { |
| debug("%s: failed to read from i2c device: %d\n", |
| __func__, ret); |
| return ret; |
| } |
| } |
| |
| return 0; |
| } |
| |
| static int anx6345_read_dpcd(struct udevice *dev, u32 reg, u8 *val) |
| { |
| int ret; |
| |
| ret = anx6345_aux_transfer(dev, |
| ANX9804_AUX_TX_COMM_READ | |
| ANX9804_AUX_TX_COMM_DP_TRANSACTION, |
| reg, val, 1); |
| if (ret) { |
| debug("Failed to read DPCD\n"); |
| return ret; |
| } |
| |
| return 0; |
| } |
| |
| static int anx6345_read_edid(struct udevice *dev, u8 *buf, int size) |
| { |
| struct anx6345_priv *priv = dev_get_priv(dev); |
| |
| if (size > EDID_SIZE) |
| size = EDID_SIZE; |
| memcpy(buf, priv->edid, size); |
| |
| return size; |
| } |
| |
| static int anx6345_attach(struct udevice *dev) |
| { |
| /* No-op */ |
| return 0; |
| } |
| |
| static int anx6345_enable(struct udevice *dev) |
| { |
| u8 chipid, colordepth, lanes, data_rate, c; |
| int ret, i, bpp; |
| struct display_timing timing; |
| struct anx6345_priv *priv = dev_get_priv(dev); |
| |
| /* Deassert reset and enable power */ |
| ret = video_bridge_set_active(dev, true); |
| if (ret) |
| return ret; |
| |
| /* Reset */ |
| anx6345_write_r1(dev, ANX9804_RST_CTRL_REG, 1); |
| mdelay(100); |
| anx6345_write_r1(dev, ANX9804_RST_CTRL_REG, 0); |
| |
| /* Write 0 to the powerdown reg (powerup everything) */ |
| anx6345_write_r1(dev, ANX9804_POWERD_CTRL_REG, 0); |
| |
| ret = anx6345_read_r1(dev, ANX9804_DEV_IDH_REG, &chipid); |
| if (ret) |
| debug("%s: read id failed: %d\n", __func__, ret); |
| |
| switch (chipid) { |
| case 0x63: |
| debug("ANX63xx detected.\n"); |
| break; |
| default: |
| debug("Error anx6345 chipid mismatch: %.2x\n", (int)chipid); |
| return -ENODEV; |
| } |
| |
| for (i = 0; i < 100; i++) { |
| anx6345_read_r0(dev, ANX9804_SYS_CTRL2_REG, &c); |
| anx6345_write_r0(dev, ANX9804_SYS_CTRL2_REG, c); |
| anx6345_read_r0(dev, ANX9804_SYS_CTRL2_REG, &c); |
| if ((c & ANX9804_SYS_CTRL2_CHA_STA) == 0) |
| break; |
| |
| mdelay(5); |
| } |
| if (i == 100) |
| debug("Error anx6345 clock is not stable\n"); |
| |
| /* Set a bunch of analog related register values */ |
| anx6345_write_r0(dev, ANX9804_PLL_CTRL_REG, 0x00); |
| anx6345_write_r1(dev, ANX9804_ANALOG_DEBUG_REG1, 0x70); |
| anx6345_write_r0(dev, ANX9804_LINK_DEBUG_REG, 0x30); |
| |
| /* Force HPD */ |
| anx6345_write_r0(dev, ANX9804_SYS_CTRL3_REG, |
| ANX9804_SYS_CTRL3_F_HPD | ANX9804_SYS_CTRL3_HPD_CTRL); |
| |
| /* Power up and configure lanes */ |
| anx6345_write_r0(dev, ANX9804_ANALOG_POWER_DOWN_REG, 0x00); |
| anx6345_write_r0(dev, ANX9804_TRAINING_LANE0_SET_REG, 0x00); |
| anx6345_write_r0(dev, ANX9804_TRAINING_LANE1_SET_REG, 0x00); |
| anx6345_write_r0(dev, ANX9804_TRAINING_LANE2_SET_REG, 0x00); |
| anx6345_write_r0(dev, ANX9804_TRAINING_LANE3_SET_REG, 0x00); |
| |
| /* Reset AUX CH */ |
| anx6345_write_r1(dev, ANX9804_RST_CTRL2_REG, |
| ANX9804_RST_CTRL2_AUX); |
| anx6345_write_r1(dev, ANX9804_RST_CTRL2_REG, 0); |
| |
| /* Powerdown audio and some other unused bits */ |
| anx6345_write_r1(dev, ANX9804_POWERD_CTRL_REG, ANX9804_POWERD_AUDIO); |
| anx6345_write_r0(dev, ANX9804_HDCP_CONTROL_0_REG, 0x00); |
| anx6345_write_r0(dev, 0xa7, 0x00); |
| |
| anx6345_read_aux_i2c(dev, 0x50, 0x0, EDID_SIZE, priv->edid); |
| if (edid_get_timing(priv->edid, EDID_SIZE, &timing, &bpp) != 0) { |
| debug("Failed to parse EDID\n"); |
| return -EIO; |
| } |
| debug("%s: panel found: %dx%d, bpp %d\n", __func__, |
| timing.hactive.typ, timing.vactive.typ, bpp); |
| if (bpp == 6) |
| colordepth = 0x00; /* 6 bit */ |
| else |
| colordepth = 0x10; /* 8 bit */ |
| anx6345_write_r1(dev, ANX9804_VID_CTRL2_REG, colordepth); |
| |
| if (anx6345_read_dpcd(dev, DP_MAX_LINK_RATE, &data_rate)) { |
| debug("%s: Failed to DP_MAX_LINK_RATE\n", __func__); |
| return -EIO; |
| } |
| debug("%s: data_rate: %d\n", __func__, (int)data_rate); |
| if (anx6345_read_dpcd(dev, DP_MAX_LANE_COUNT, &lanes)) { |
| debug("%s: Failed to read DP_MAX_LANE_COUNT\n", __func__); |
| return -EIO; |
| } |
| lanes &= DP_MAX_LANE_COUNT_MASK; |
| debug("%s: lanes: %d\n", __func__, (int)lanes); |
| |
| /* Set data-rate / lanes */ |
| anx6345_write_r0(dev, ANX9804_LINK_BW_SET_REG, data_rate); |
| anx6345_write_r0(dev, ANX9804_LANE_COUNT_SET_REG, lanes); |
| |
| /* Link training */ |
| anx6345_write_r0(dev, ANX9804_LINK_TRAINING_CTRL_REG, |
| ANX9804_LINK_TRAINING_CTRL_EN); |
| mdelay(5); |
| for (i = 0; i < 100; i++) { |
| anx6345_read_r0(dev, ANX9804_LINK_TRAINING_CTRL_REG, &c); |
| if ((chipid == 0x63) && (c & 0x80) == 0) |
| break; |
| |
| mdelay(5); |
| } |
| if (i == 100) { |
| debug("Error anx6345 link training timeout\n"); |
| return -ENODEV; |
| } |
| |
| /* Enable */ |
| anx6345_write_r1(dev, ANX9804_VID_CTRL1_REG, |
| ANX9804_VID_CTRL1_VID_EN | ANX9804_VID_CTRL1_EDGE); |
| /* Force stream valid */ |
| anx6345_write_r0(dev, ANX9804_SYS_CTRL3_REG, |
| ANX9804_SYS_CTRL3_F_HPD | |
| ANX9804_SYS_CTRL3_HPD_CTRL | |
| ANX9804_SYS_CTRL3_F_VALID | |
| ANX9804_SYS_CTRL3_VALID_CTRL); |
| |
| return 0; |
| } |
| |
| static int anx6345_probe(struct udevice *dev) |
| { |
| if (device_get_uclass_id(dev->parent) != UCLASS_I2C) |
| return -EPROTONOSUPPORT; |
| |
| return anx6345_enable(dev); |
| } |
| |
| struct video_bridge_ops anx6345_ops = { |
| .attach = anx6345_attach, |
| .set_backlight = anx6345_set_backlight, |
| .read_edid = anx6345_read_edid, |
| }; |
| |
| static const struct udevice_id anx6345_ids[] = { |
| { .compatible = "analogix,anx6345", }, |
| { } |
| }; |
| |
| U_BOOT_DRIVER(analogix_anx6345) = { |
| .name = "analogix_anx6345", |
| .id = UCLASS_VIDEO_BRIDGE, |
| .of_match = anx6345_ids, |
| .probe = anx6345_probe, |
| .ops = &anx6345_ops, |
| .priv_auto_alloc_size = sizeof(struct anx6345_priv), |
| }; |