stm32mp1: add FUSE command support
Add support of fuse command (read/write/program/sense)
on bank 0 to access to BSEC SAFMEM (4096 OTP bits).
Signed-off-by: Patrick Delaunay <patrick.delaunay@st.com>
Signed-off-by: Patrice Chotard <patrice.chotard@st.com>
diff --git a/MAINTAINERS b/MAINTAINERS
index 5670917..3209dcd 100644
--- a/MAINTAINERS
+++ b/MAINTAINERS
@@ -204,6 +204,7 @@
S: Maintained
F: arch/arm/mach-stm32mp
F: drivers/clk/clk_stm32mp1.c
+F: drivers/misc/stm32mp_fuse.c
F: drivers/ram/stm32mp1/
ARM STM STV0991
diff --git a/arch/arm/Kconfig b/arch/arm/Kconfig
index 0d1802b..582e84c 100644
--- a/arch/arm/Kconfig
+++ b/arch/arm/Kconfig
@@ -1225,6 +1225,7 @@
select DM_SERIAL
select OF_CONTROL
select OF_LIBFDT
+ select MISC
select PINCTRL
select REGMAP
select SUPPORT_SPL
diff --git a/configs/stm32mp15_basic_defconfig b/configs/stm32mp15_basic_defconfig
index b1c3690..9e43cc9 100644
--- a/configs/stm32mp15_basic_defconfig
+++ b/configs/stm32mp15_basic_defconfig
@@ -18,6 +18,7 @@
# CONFIG_CMD_EXPORTENV is not set
# CONFIG_CMD_IMPORTENV is not set
CONFIG_CMD_MEMINFO=y
+CONFIG_CMD_FUSE=y
CONFIG_CMD_GPIO=y
CONFIG_CMD_GPT=y
CONFIG_CMD_I2C=y
diff --git a/drivers/misc/Kconfig b/drivers/misc/Kconfig
index be900cf..17b3a80 100644
--- a/drivers/misc/Kconfig
+++ b/drivers/misc/Kconfig
@@ -158,6 +158,15 @@
help
The I2C address of the PCA9551 LED controller.
+config STM32MP_FUSE
+ bool "Enable STM32MP fuse wrapper providing the fuse API"
+ depends on ARCH_STM32MP && MISC
+ default y if CMD_FUSE
+ help
+ If you say Y here, you will get support for the fuse API (OTP)
+ for STM32MP architecture.
+ This API is needed for CMD_FUSE.
+
config STM32_RCC
bool "Enable RCC driver for the STM32 SoC's family"
depends on STM32 && MISC
diff --git a/drivers/misc/Makefile b/drivers/misc/Makefile
index e362609..4ce9d21 100644
--- a/drivers/misc/Makefile
+++ b/drivers/misc/Makefile
@@ -51,5 +51,6 @@
obj-$(CONFIG_QFW) += qfw.o
obj-$(CONFIG_ROCKCHIP_EFUSE) += rockchip-efuse.o
obj-$(CONFIG_STM32_RCC) += stm32_rcc.o
+obj-$(CONFIG_STM32MP_FUSE) += stm32mp_fuse.o
obj-$(CONFIG_SYS_DPAA_QBMAN) += fsl_portals.o
obj-$(CONFIG_GDSYS_RXAUI_CTRL) += gdsys_rxaui_ctrl.o
diff --git a/drivers/misc/stm32mp_fuse.c b/drivers/misc/stm32mp_fuse.c
new file mode 100644
index 0000000..2d66135
--- /dev/null
+++ b/drivers/misc/stm32mp_fuse.c
@@ -0,0 +1,116 @@
+// SPDX-License-Identifier: GPL-2.0+
+/*
+ * Copyright (C) 2018, STMicroelectronics - All Rights Reserved
+ */
+
+#include <common.h>
+#include <command.h>
+#include <misc.h>
+#include <errno.h>
+#include <dm/device.h>
+#include <dm/uclass.h>
+
+#define STM32MP_OTP_BANK 0
+
+/*
+ * The 'fuse' command API
+ */
+int fuse_read(u32 bank, u32 word, u32 *val)
+{
+ int ret = 0;
+ struct udevice *dev;
+
+ switch (bank) {
+ case STM32MP_OTP_BANK:
+ ret = uclass_get_device_by_driver(UCLASS_MISC,
+ DM_GET_DRIVER(stm32mp_bsec),
+ &dev);
+ if (ret)
+ return ret;
+ ret = misc_read(dev, word * 4 + STM32_BSEC_SHADOW_OFFSET,
+ val, 4);
+ break;
+
+ default:
+ printf("stm32mp %s: wrong value for bank %i\n", __func__, bank);
+ ret = -EINVAL;
+ break;
+ }
+
+ return ret;
+}
+
+int fuse_prog(u32 bank, u32 word, u32 val)
+{
+ struct udevice *dev;
+ int ret;
+
+ switch (bank) {
+ case STM32MP_OTP_BANK:
+ ret = uclass_get_device_by_driver(UCLASS_MISC,
+ DM_GET_DRIVER(stm32mp_bsec),
+ &dev);
+ if (ret)
+ return ret;
+ ret = misc_write(dev, word * 4 + STM32_BSEC_OTP_OFFSET,
+ &val, 4);
+ break;
+
+ default:
+ printf("stm32mp %s: wrong value for bank %i\n", __func__, bank);
+ ret = -EINVAL;
+ break;
+ }
+
+ return ret;
+}
+
+int fuse_sense(u32 bank, u32 word, u32 *val)
+{
+ struct udevice *dev;
+ int ret;
+
+ switch (bank) {
+ case STM32MP_OTP_BANK:
+ ret = uclass_get_device_by_driver(UCLASS_MISC,
+ DM_GET_DRIVER(stm32mp_bsec),
+ &dev);
+ if (ret)
+ return ret;
+ ret = misc_read(dev, word * 4 + STM32_BSEC_OTP_OFFSET, val, 4);
+ break;
+
+ default:
+ printf("stm32mp %s: wrong value for bank %i\n", __func__, bank);
+ ret = -EINVAL;
+ break;
+ }
+
+ return ret;
+}
+
+int fuse_override(u32 bank, u32 word, u32 val)
+{
+ struct udevice *dev;
+ int ret;
+
+ switch (bank) {
+ case STM32MP_OTP_BANK:
+ ret = uclass_get_device_by_driver(UCLASS_MISC,
+ DM_GET_DRIVER(stm32mp_bsec),
+ &dev);
+ if (ret)
+ return ret;
+ ret = misc_write(dev, word * 4 + STM32_BSEC_SHADOW_OFFSET,
+ &val, 4);
+ break;
+
+ default:
+ printf("stm32mp %s: wrong value for bank %i\n",
+ __func__, bank);
+ ret = -EINVAL;
+ break;
+ }
+
+ return ret;
+}