power: regulator: qcom-rpmh-regulator: add build infra
Add Kconfig and Makefile entries for this driver now that it can build
for U-Boot.
Reviewed-by: Neil Armstrong <neil.armstrong@linaro.org>
Signed-off-by: Caleb Connolly <caleb.connolly@linaro.org>
diff --git a/drivers/power/regulator/Kconfig b/drivers/power/regulator/Kconfig
index 102ec7b..bc061c2 100644
--- a/drivers/power/regulator/Kconfig
+++ b/drivers/power/regulator/Kconfig
@@ -216,6 +216,14 @@
features for gpio regulators. The driver implements get/set for
voltage value.
+config DM_REGULATOR_QCOM_RPMH
+ bool "Enable driver model for Qualcomm RPMh regulator"
+ depends on DM_REGULATOR && QCOM_RPMH
+ ---help---
+ Enable support for the Qualcomm RPMh regulator. The driver
+ implements get/set api for a limited set of regulators used
+ by u-boot.
+
config SPL_DM_REGULATOR_GPIO
bool "Enable Driver Model for GPIO REGULATOR in SPL"
depends on DM_REGULATOR_GPIO && SPL_GPIO
diff --git a/drivers/power/regulator/Makefile b/drivers/power/regulator/Makefile
index f79932d..56a5276 100644
--- a/drivers/power/regulator/Makefile
+++ b/drivers/power/regulator/Makefile
@@ -21,6 +21,7 @@
obj-$(CONFIG_$(SPL_)DM_REGULATOR_COMMON) += regulator_common.o
obj-$(CONFIG_$(SPL_)DM_REGULATOR_FIXED) += fixed.o
obj-$(CONFIG_$(SPL_)DM_REGULATOR_GPIO) += gpio-regulator.o
+obj-$(CONFIG_DM_REGULATOR_QCOM_RPMH) += qcom-rpmh-regulator.o
obj-$(CONFIG_$(SPL_TPL_)REGULATOR_RK8XX) += rk8xx.o
obj-$(CONFIG_DM_REGULATOR_S2MPS11) += s2mps11_regulator.o
obj-$(CONFIG_REGULATOR_S5M8767) += s5m8767.o