ARM: UniPhier: move UART pin settings to SPL
The UniPhier platform is going to enable Driver Model and UART
support on SPL. Move UART pin settings to early_pin_init(),
which is called from SPL.
Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>
diff --git a/arch/arm/mach-uniphier/ph1-pro4/Makefile b/arch/arm/mach-uniphier/ph1-pro4/Makefile
index ac27d9b..f6a584e 100644
--- a/arch/arm/mach-uniphier/ph1-pro4/Makefile
+++ b/arch/arm/mach-uniphier/ph1-pro4/Makefile
@@ -5,7 +5,7 @@
ifdef CONFIG_SPL_BUILD
obj-$(CONFIG_DEBUG_LL) += lowlevel_debug.o
obj-y += sg_init.o pll_init.o early_clkrst_init.o \
- pll_spectrum.o umc_init.o ddrphy_init.o
+ early_pinctrl.o pll_spectrum.o umc_init.o ddrphy_init.o
obj-$(CONFIG_PFC_MICRO_SUPPORT_CARD) += sbc_init.o
obj-$(CONFIG_DCC_MICRO_SUPPORT_CARD) += sbc_init_3cs.o
obj-$(CONFIG_SPL_DM) += platdevice.o
diff --git a/arch/arm/mach-uniphier/ph1-pro4/early_pinctrl.c b/arch/arm/mach-uniphier/ph1-pro4/early_pinctrl.c
new file mode 100644
index 0000000..85bb6a0
--- /dev/null
+++ b/arch/arm/mach-uniphier/ph1-pro4/early_pinctrl.c
@@ -0,0 +1,27 @@
+/*
+ * Copyright (C) 2011-2015 Panasonic Corporation
+ * Copyright (C) 2015 Socionext Inc.
+ *
+ * SPDX-License-Identifier: GPL-2.0+
+ */
+
+#include <asm/io.h>
+#include <mach/sg-regs.h>
+
+void early_pin_init(void)
+{
+ /* Comment format: PAD Name -> Function Name */
+
+#ifdef CONFIG_UNIPHIER_SERIAL
+ sg_set_pinsel(127, 0); /* RXD0 -> RXD0 */
+ sg_set_pinsel(128, 0); /* TXD0 -> TXD0 */
+ sg_set_pinsel(129, 0); /* RXD1 -> RXD1 */
+ sg_set_pinsel(130, 0); /* TXD1 -> TXD1 */
+ sg_set_pinsel(131, 0); /* RXD2 -> RXD2 */
+ sg_set_pinsel(132, 0); /* TXD2 -> TXD2 */
+ sg_set_pinsel(88, 2); /* CH6CLK -> RXD3 */
+ sg_set_pinsel(89, 2); /* CH6VAL -> TXD3 */
+#endif
+
+ writel(1, SG_LOADPINCTRL);
+}
diff --git a/arch/arm/mach-uniphier/ph1-pro4/pinctrl.c b/arch/arm/mach-uniphier/ph1-pro4/pinctrl.c
index f382ef4..4df9098e 100644
--- a/arch/arm/mach-uniphier/ph1-pro4/pinctrl.c
+++ b/arch/arm/mach-uniphier/ph1-pro4/pinctrl.c
@@ -1,10 +1,10 @@
/*
- * Copyright (C) 2011-2014 Panasonic Corporation
+ * Copyright (C) 2011-2015 Panasonic Corporation
+ * Copyright (C) 2015 Socionext Inc.
*
* SPDX-License-Identifier: GPL-2.0+
*/
-#include <common.h>
#include <asm/io.h>
#include <mach/sg-regs.h>
@@ -12,17 +12,6 @@
{
/* Comment format: PAD Name -> Function Name */
-#ifdef CONFIG_UNIPHIER_SERIAL
- sg_set_pinsel(127, 0); /* RXD0 -> RXD0 */
- sg_set_pinsel(128, 0); /* TXD0 -> TXD0 */
- sg_set_pinsel(129, 0); /* RXD1 -> RXD1 */
- sg_set_pinsel(130, 0); /* TXD1 -> TXD1 */
- sg_set_pinsel(131, 0); /* RXD2 -> RXD2 */
- sg_set_pinsel(132, 0); /* TXD2 -> TXD2 */
- sg_set_pinsel(88, 2); /* CH6CLK -> RXD3 */
- sg_set_pinsel(89, 2); /* CH6VAL -> TXD3 */
-#endif
-
#ifdef CONFIG_NAND_DENALI
sg_set_pinsel(40, 0); /* NFD0 -> NFD0 */
sg_set_pinsel(41, 0); /* NFD1 -> NFD1 */