tegra: dts: Add serial port details
Some Tegra device tree files do not include information about the serial
ports. Add this and also add information about the input clock speed.
The console alias needs to be set up to indicate which port is used for
the console.
Also add a binding file since this is missing.
Series-changes; 5
- Add full serial port nodes from Linux tree (commit fc9d4dbe)
- Use /chosen/stdout-path instead of /aliases/console to specify the console
Signed-off-by: Simon Glass <sjg@chromium.org>
diff --git a/arch/arm/dts/tegra20.dtsi b/arch/arm/dts/tegra20.dtsi
index a524f6e..5f927f7 100644
--- a/arch/arm/dts/tegra20.dtsi
+++ b/arch/arm/dts/tegra20.dtsi
@@ -1,3 +1,4 @@
+#include <dt-bindings/clock/tegra20-car.h>
#include <dt-bindings/gpio/tegra-gpio.h>
#include <dt-bindings/interrupt-controller/arm-gic.h>
@@ -189,39 +190,69 @@
dma-channel = < 1 >;
};
- serial@70006000 {
+ uarta: serial@70006000 {
compatible = "nvidia,tegra20-uart";
reg = <0x70006000 0x40>;
reg-shift = <2>;
- interrupts = < 68 >;
+ interrupts = <GIC_SPI 36 IRQ_TYPE_LEVEL_HIGH>;
+ clocks = <&tegra_car TEGRA20_CLK_UARTA>;
+ resets = <&tegra_car 6>;
+ reset-names = "serial";
+ dmas = <&apbdma 8>, <&apbdma 8>;
+ dma-names = "rx", "tx";
+ status = "disabled";
};
- serial@70006040 {
+ uartb: serial@70006040 {
compatible = "nvidia,tegra20-uart";
reg = <0x70006040 0x40>;
reg-shift = <2>;
- interrupts = < 69 >;
+ interrupts = <GIC_SPI 37 IRQ_TYPE_LEVEL_HIGH>;
+ clocks = <&tegra_car TEGRA20_CLK_UARTB>;
+ resets = <&tegra_car 7>;
+ reset-names = "serial";
+ dmas = <&apbdma 9>, <&apbdma 9>;
+ dma-names = "rx", "tx";
+ status = "disabled";
};
- serial@70006200 {
+ uartc: serial@70006200 {
compatible = "nvidia,tegra20-uart";
reg = <0x70006200 0x100>;
reg-shift = <2>;
- interrupts = < 78 >;
+ interrupts = <GIC_SPI 46 IRQ_TYPE_LEVEL_HIGH>;
+ clocks = <&tegra_car TEGRA20_CLK_UARTC>;
+ resets = <&tegra_car 55>;
+ reset-names = "serial";
+ dmas = <&apbdma 10>, <&apbdma 10>;
+ dma-names = "rx", "tx";
+ status = "disabled";
};
- serial@70006300 {
+ uartd: serial@70006300 {
compatible = "nvidia,tegra20-uart";
reg = <0x70006300 0x100>;
reg-shift = <2>;
- interrupts = < 122 >;
+ interrupts = <GIC_SPI 90 IRQ_TYPE_LEVEL_HIGH>;
+ clocks = <&tegra_car TEGRA20_CLK_UARTD>;
+ resets = <&tegra_car 65>;
+ reset-names = "serial";
+ dmas = <&apbdma 19>, <&apbdma 19>;
+ dma-names = "rx", "tx";
+ status = "disabled";
};
- serial@70006400 {
+ uarte: serial@70006400 {
compatible = "nvidia,tegra20-uart";
reg = <0x70006400 0x100>;
reg-shift = <2>;
- interrupts = < 123 >;
+ interrupts = <GIC_SPI 91 IRQ_TYPE_LEVEL_HIGH>;
+ clocks = <&tegra_car TEGRA20_CLK_UARTE>;
+ resets = <&tegra_car 66>;
+ reset-names = "serial";
+ dmas = <&apbdma 20>, <&apbdma 20>;
+ dma-names = "rx", "tx";
+ status = "disabled";
};
nand: nand-controller@70008000 {