Merge git://git.denx.de/u-boot-mpc85xx
diff --git a/Makefile b/Makefile
index dfed58b..0874964 100644
--- a/Makefile
+++ b/Makefile
@@ -5,7 +5,7 @@
VERSION = 2017
PATCHLEVEL = 01
SUBLEVEL =
-EXTRAVERSION = -rc1
+EXTRAVERSION = -rc2
NAME =
# *DOCUMENTATION*
@@ -903,6 +903,12 @@
$(LDR) -T $(CONFIG_CPU) -c $@ $< $(LDR_FLAGS)
$(BOARD_SIZE_CHECK)
+# binman
+# ---------------------------------------------------------------------------
+quiet_cmd_binman = BINMAN $@
+cmd_binman = $(srctree)/tools/binman/binman -d u-boot.dtb -O . \
+ -I . -I $(srctree)/board/$(BOARDDIR) $<
+
OBJCOPYFLAGS_u-boot.ldr.hex := -I binary -O ihex
OBJCOPYFLAGS_u-boot.ldr.srec := -I binary -O srec
@@ -1047,50 +1053,11 @@
# x86 uses a large ROM. We fill it with 0xff, put the 16-bit stuff (including
# reset vector) at the top, Intel ME descriptor at the bottom, and U-Boot in
-# the middle.
+# the middle. This is handled by binman based on an image description in the
+# board's device tree.
ifneq ($(CONFIG_X86_RESET_VECTOR),)
rom: u-boot.rom FORCE
-IFDTOOL=$(objtree)/tools/ifdtool
-IFDTOOL_FLAGS = -f 0:$(objtree)/u-boot.dtb
-IFDTOOL_FLAGS += -m 0x$(shell $(NM) u-boot |grep _dt_ucode_base_size |cut -d' ' -f1)
-IFDTOOL_FLAGS += -U $(CONFIG_SYS_TEXT_BASE):$(objtree)/u-boot-nodtb.bin
-IFDTOOL_FLAGS += -w $(CONFIG_SYS_X86_START16):$(objtree)/u-boot-x86-16bit.bin
-IFDTOOL_FLAGS += -C
-
-ifneq ($(CONFIG_HAVE_INTEL_ME),)
-IFDTOOL_ME_FLAGS = -D $(srctree)/board/$(BOARDDIR)/descriptor.bin
-IFDTOOL_ME_FLAGS += -i ME:$(srctree)/board/$(BOARDDIR)/me.bin
-endif
-
-ifneq ($(CONFIG_HAVE_MRC),)
-IFDTOOL_FLAGS += -w $(CONFIG_X86_MRC_ADDR):$(srctree)/board/$(BOARDDIR)/mrc.bin
-endif
-
-ifneq ($(CONFIG_HAVE_FSP),)
-IFDTOOL_FLAGS += -w $(CONFIG_FSP_ADDR):$(srctree)/board/$(BOARDDIR)/$(CONFIG_FSP_FILE)
-endif
-
-ifneq ($(CONFIG_HAVE_CMC),)
-IFDTOOL_FLAGS += -w $(CONFIG_CMC_ADDR):$(srctree)/board/$(BOARDDIR)/$(CONFIG_CMC_FILE)
-endif
-
-ifneq ($(CONFIG_HAVE_VGA_BIOS),)
-IFDTOOL_FLAGS += -w $(CONFIG_VGA_BIOS_ADDR):$(srctree)/board/$(BOARDDIR)/$(CONFIG_VGA_BIOS_FILE)
-endif
-
-ifneq ($(CONFIG_HAVE_REFCODE),)
-IFDTOOL_FLAGS += -w $(CONFIG_X86_REFCODE_ADDR):refcode.bin
-endif
-
-quiet_cmd_ifdtool = IFDTOOL $@
-cmd_ifdtool = $(IFDTOOL) -c -r $(CONFIG_ROM_SIZE) u-boot.tmp;
-ifneq ($(CONFIG_HAVE_INTEL_ME),)
-cmd_ifdtool += $(IFDTOOL) $(IFDTOOL_ME_FLAGS) u-boot.tmp;
-endif
-cmd_ifdtool += $(IFDTOOL) $(IFDTOOL_FLAGS) u-boot.tmp;
-cmd_ifdtool += mv u-boot.tmp $@
-
refcode.bin: $(srctree)/board/$(BOARDDIR)/refcode.bin FORCE
$(call if_changed,copy)
@@ -1100,7 +1067,7 @@
u-boot.rom: u-boot-x86-16bit.bin u-boot.bin FORCE \
$(if $(CONFIG_HAVE_REFCODE),refcode.bin)
- $(call if_changed,ifdtool)
+ $(call if_changed,binman)
OBJCOPYFLAGS_u-boot-x86-16bit.bin := -O binary -j .start16 -j .resetvec
u-boot-x86-16bit.bin: u-boot FORCE
@@ -1108,10 +1075,8 @@
endif
ifneq ($(CONFIG_ARCH_SUNXI),)
-OBJCOPYFLAGS_u-boot-sunxi-with-spl.bin = -I binary -O binary \
- --pad-to=$(CONFIG_SPL_PAD_TO) --gap-fill=0xff
-u-boot-sunxi-with-spl.bin: spl/sunxi-spl.bin u-boot.img FORCE
- $(call if_changed,pad_cat)
+u-boot-sunxi-with-spl.bin: spl/sunxi-spl.bin u-boot.img u-boot.dtb FORCE
+ $(call if_changed,binman)
endif
ifneq ($(CONFIG_TEGRA),)
diff --git a/arch/arm/Kconfig b/arch/arm/Kconfig
index 587f288..d871a45 100644
--- a/arch/arm/Kconfig
+++ b/arch/arm/Kconfig
@@ -918,6 +918,8 @@
source "arch/arm/mach-kirkwood/Kconfig"
+source "arch/arm/mach-litesom/Kconfig"
+
source "arch/arm/mach-mvebu/Kconfig"
source "arch/arm/cpu/armv7/ls102xa/Kconfig"
diff --git a/arch/arm/Makefile b/arch/arm/Makefile
index 236debb..ef4f69d 100644
--- a/arch/arm/Makefile
+++ b/arch/arm/Makefile
@@ -58,6 +58,7 @@
machine-$(CONFIG_ARCH_KEYSTONE) += keystone
# TODO: rename CONFIG_KIRKWOOD -> CONFIG_ARCH_KIRKWOOD
machine-$(CONFIG_KIRKWOOD) += kirkwood
+machine-$(CONFIG_LITESOM) += litesom
machine-$(CONFIG_ARCH_MESON) += meson
machine-$(CONFIG_ARCH_MVEBU) += mvebu
# TODO: rename CONFIG_TEGRA -> CONFIG_ARCH_TEGRA
diff --git a/arch/arm/cpu/arm926ejs/mxs/spl_boot.c b/arch/arm/cpu/arm926ejs/mxs/spl_boot.c
index eb8669b..d9d1d73 100644
--- a/arch/arm/cpu/arm926ejs/mxs/spl_boot.c
+++ b/arch/arm/cpu/arm926ejs/mxs/spl_boot.c
@@ -40,17 +40,17 @@
;
}
+#if defined(CONFIG_MX23)
#define MUX_CONFIG_BOOTMODE_PAD (MXS_PAD_3V3 | MXS_PAD_4MA | MXS_PAD_NOPULL)
static const iomux_cfg_t iomux_boot[] = {
-#if defined(CONFIG_MX23)
MX23_PAD_LCD_D00__GPIO_1_0 | MUX_CONFIG_BOOTMODE_PAD,
MX23_PAD_LCD_D01__GPIO_1_1 | MUX_CONFIG_BOOTMODE_PAD,
MX23_PAD_LCD_D02__GPIO_1_2 | MUX_CONFIG_BOOTMODE_PAD,
MX23_PAD_LCD_D03__GPIO_1_3 | MUX_CONFIG_BOOTMODE_PAD,
MX23_PAD_LCD_D04__GPIO_1_4 | MUX_CONFIG_BOOTMODE_PAD,
MX23_PAD_LCD_D05__GPIO_1_5 | MUX_CONFIG_BOOTMODE_PAD,
-#endif
};
+#endif
static uint8_t mxs_get_bootmode_index(void)
{
diff --git a/arch/arm/cpu/armv7/mx5/Kconfig b/arch/arm/cpu/armv7/mx5/Kconfig
index 9f250c6..5fb5513 100644
--- a/arch/arm/cpu/armv7/mx5/Kconfig
+++ b/arch/arm/cpu/armv7/mx5/Kconfig
@@ -18,11 +18,19 @@
bool "Support USB armory"
select CPU_V7
+config TARGET_MX53CX9020
+ bool "Support CX9020"
+ select CPU_V7
+ select MX53
+ select DM
+ select DM_SERIAL
+
endchoice
config SYS_SOC
default "mx5"
+source "board/beckhoff/mx53cx9020/Kconfig"
source "board/inversepath/usbarmory/Kconfig"
endif
diff --git a/arch/arm/cpu/armv7/mx6/Kconfig b/arch/arm/cpu/armv7/mx6/Kconfig
index 8c96ba3..c646966 100644
--- a/arch/arm/cpu/armv7/mx6/Kconfig
+++ b/arch/arm/cpu/armv7/mx6/Kconfig
@@ -26,6 +26,10 @@
select ROM_UNIFIED_SECTIONS
bool
+config MX6SLL
+ select ROM_UNIFIED_SECTIONS
+ bool
+
config MX6UL
select SYS_L2CACHE_OFF
select ROM_UNIFIED_SECTIONS
@@ -51,6 +55,13 @@
bool "Advantech dms-ba16"
select MX6Q
+config TARGET_APALIS_IMX6
+ bool "Toradex Apalis iMX6 board"
+ select SUPPORT_SPL
+ select DM
+ select DM_SERIAL
+ select DM_THERMAL
+
config TARGET_ARISTAINETOS
bool "aristainetos"
@@ -73,6 +84,13 @@
select DM_SERIAL
select DM_GPIO
+config TARGET_COLIBRI_IMX6
+ bool "Toradex Colibri iMX6 board"
+ select SUPPORT_SPL
+ select DM
+ select DM_SERIAL
+ select DM_THERMAL
+
config TARGET_EMBESTMX6BOARDS
bool "embestmx6boards"
@@ -108,7 +126,21 @@
select MX6QDL
select OF_CONTROL
select DM
+ select DM_ETH
+ select DM_GPIO
+ select DM_I2C
+ select DM_MMC
+ select DM_THERMAL
+ select SUPPORT_SPL
+
+config TARGET_MX6Q_ICORE_RQS
+ bool "Support Engicam i.Core RQS"
+ select MX6QDL
+ select OF_CONTROL
+ select DM
+ select DM_ETH
select DM_GPIO
+ select DM_I2C
select DM_MMC
select DM_THERMAL
select SUPPORT_SPL
@@ -128,6 +160,12 @@
bool "mx6slevk"
select SUPPORT_SPL
+config TARGET_MX6SLLEVK
+ bool "mx6sll evk"
+ select MX6SLL
+ select DM
+ select DM_THERMAL
+
config TARGET_MX6SXSABRESD
bool "mx6sxsabresd"
select MX6SX
@@ -151,7 +189,19 @@
config TARGET_MX6UL_14X14_EVK
bool "mx6ul_14x14_evk"
select MX6UL
+ select DM
+ select DM_THERMAL
+ select SUPPORT_SPL
+
+config TARGET_MX6UL_GEAM
+ bool "Support Engicam GEAM6UL"
+ select MX6UL
+ select OF_CONTROL
select DM
+ select DM_ETH
+ select DM_GPIO
+ select DM_I2C
+ select DM_MMC
select DM_THERMAL
select SUPPORT_SPL
@@ -172,6 +222,10 @@
bool "PICO-IMX6UL-EMMC"
select MX6UL
+config TARGET_LITEBOARD
+ bool "Grinn liteBoard (i.MX6UL)"
+ select LITESOM
+
config TARGET_PLATINUM_PICON
bool "platinum-picon"
select SUPPORT_SPL
@@ -203,6 +257,9 @@
config TARGET_UDOO_NEO
bool "UDOO Neo"
select SUPPORT_SPL
+ select MX6SX
+ select DM
+ select DM_THERMAL
config TARGET_SAMTEC_VINING_2000
bool "samtec VIN|ING 2000"
@@ -253,15 +310,19 @@
source "board/congatec/cgtqmx6eval/Kconfig"
source "board/el/el6x/Kconfig"
source "board/embest/mx6boards/Kconfig"
+source "board/engicam/geam6ul/Kconfig"
source "board/engicam/icorem6/Kconfig"
+source "board/engicam/icorem6_rqs/Kconfig"
source "board/freescale/mx6qarm2/Kconfig"
source "board/freescale/mx6qsabreauto/Kconfig"
source "board/freescale/mx6sabresd/Kconfig"
source "board/freescale/mx6slevk/Kconfig"
+source "board/freescale/mx6sllevk/Kconfig"
source "board/freescale/mx6sxsabresd/Kconfig"
source "board/freescale/mx6sxsabreauto/Kconfig"
source "board/freescale/mx6ul_14x14_evk/Kconfig"
source "board/freescale/mx6ullevk/Kconfig"
+source "board/grinn/liteboard/Kconfig"
source "board/phytec/pcm058/Kconfig"
source "board/gateworks/gw_ventana/Kconfig"
source "board/kosagi/novena/Kconfig"
@@ -271,6 +332,8 @@
source "board/technexion/pico-imx6ul/Kconfig"
source "board/tbs/tbs2910/Kconfig"
source "board/tqc/tqma6/Kconfig"
+source "board/toradex/apalis_imx6/Kconfig"
+source "board/toradex/colibri_imx6/Kconfig"
source "board/udoo/Kconfig"
source "board/udoo/neo/Kconfig"
source "board/wandboard/Kconfig"
diff --git a/arch/arm/cpu/armv7/mx6/clock.c b/arch/arm/cpu/armv7/mx6/clock.c
index 2995628..fa54c95 100644
--- a/arch/arm/cpu/armv7/mx6/clock.c
+++ b/arch/arm/cpu/armv7/mx6/clock.c
@@ -171,6 +171,8 @@
reg &= ~mask;
__raw_writel(reg, &imx_ccm->CCGR2);
} else {
+ if (is_mx6sll())
+ return -EINVAL;
if (is_mx6sx() || is_mx6ul() || is_mx6ull()) {
mask = MXC_CCM_CCGR6_I2C4_MASK;
addr = &imx_ccm->CCGR6;
@@ -382,7 +384,7 @@
u32 reg, perclk_podf;
reg = __raw_readl(&imx_ccm->cscmr1);
- if (is_mx6sl() || is_mx6sx() ||
+ if (is_mx6sll() || is_mx6sl() || is_mx6sx() ||
is_mx6dqp() || is_mx6ul() || is_mx6ull()) {
if (reg & MXC_CCM_CSCMR1_PER_CLK_SEL_MASK)
return MXC_HCLK; /* OSC 24Mhz */
@@ -400,7 +402,7 @@
reg = __raw_readl(&imx_ccm->cscdr1);
if (is_mx6sl() || is_mx6sx() || is_mx6dqp() || is_mx6ul() ||
- is_mx6ull()) {
+ is_mx6sll() || is_mx6ull()) {
if (reg & MXC_CCM_CSCDR1_UART_CLK_SEL)
freq = MXC_HCLK;
}
@@ -420,7 +422,7 @@
MXC_CCM_CSCDR2_ECSPI_CLK_PODF_OFFSET;
if (is_mx6dqp() || is_mx6sl() || is_mx6sx() || is_mx6ul() ||
- is_mx6ull()) {
+ is_mx6sll() || is_mx6ull()) {
if (reg & MXC_CCM_CSCDR2_ECSPI_CLK_SEL_MASK)
return MXC_HCLK / (cspi_podf + 1);
}
@@ -482,7 +484,8 @@
u32 freq, podf, per2_clk2_podf, pmu_misc2_audio_div;
- if (is_mx6sx() || is_mx6ul() || is_mx6ull() || is_mx6sl()) {
+ if (is_mx6sx() || is_mx6ul() || is_mx6ull() || is_mx6sl() ||
+ is_mx6sll()) {
podf = (cbcdr & MXC_CCM_CBCDR_MMDC_CH1_PODF_MASK) >>
MXC_CCM_CBCDR_MMDC_CH1_PODF_OFFSET;
if (cbcdr & MXC_CCM_CBCDR_PERIPH2_CLK_SEL) {
@@ -514,6 +517,11 @@
freq = mxc_get_pll_pfd(PLL_BUS, 0);
break;
case 3:
+ if (is_mx6sl()) {
+ freq = mxc_get_pll_pfd(PLL_BUS, 2) >> 1;
+ break;
+ }
+
pmu_misc2_audio_div = PMU_MISC2_AUDIO_DIV(__raw_readl(&imx_ccm->pmu_misc2));
switch (pmu_misc2_audio_div) {
case 0:
@@ -620,16 +628,19 @@
debug("mxs_set_lcdclk, freq = %dKHz\n", freq);
- if (!is_mx6sx() && !is_mx6ul() && !is_mx6ull()) {
+ if (!is_mx6sx() && !is_mx6ul() && !is_mx6ull() && !is_mx6sl() &&
+ !is_mx6sll()) {
debug("This chip not support lcd!\n");
return;
}
- if (base_addr == LCDIF1_BASE_ADDR) {
- reg = readl(&imx_ccm->cscdr2);
- /* Can't change clocks when clock not from pre-mux */
- if ((reg & MXC_CCM_CSCDR2_LCDIF1_CLK_SEL_MASK) != 0)
- return;
+ if (!is_mx6sl()) {
+ if (base_addr == LCDIF1_BASE_ADDR) {
+ reg = readl(&imx_ccm->cscdr2);
+ /* Can't change clocks when clock not from pre-mux */
+ if ((reg & MXC_CCM_CSCDR2_LCDIF1_CLK_SEL_MASK) != 0)
+ return;
+ }
}
if (is_mx6sx()) {
@@ -700,24 +711,44 @@
if (enable_pll_video(pll_div, pll_num, pll_denom, post_div))
return;
- /* Select pre-lcd clock to PLL5 and set pre divider */
- clrsetbits_le32(&imx_ccm->cscdr2,
- MXC_CCM_CSCDR2_LCDIF1_PRED_SEL_MASK |
- MXC_CCM_CSCDR2_LCDIF1_PRE_DIV_MASK,
- (0x2 << MXC_CCM_CSCDR2_LCDIF1_PRED_SEL_OFFSET) |
- ((pred - 1) <<
- MXC_CCM_CSCDR2_LCDIF1_PRE_DIV_OFFSET));
+ enable_lcdif_clock(base_addr, 0);
+ if (!is_mx6sl()) {
+ /* Select pre-lcd clock to PLL5 and set pre divider */
+ clrsetbits_le32(&imx_ccm->cscdr2,
+ MXC_CCM_CSCDR2_LCDIF1_PRED_SEL_MASK |
+ MXC_CCM_CSCDR2_LCDIF1_PRE_DIV_MASK,
+ (0x2 << MXC_CCM_CSCDR2_LCDIF1_PRED_SEL_OFFSET) |
+ ((pred - 1) <<
+ MXC_CCM_CSCDR2_LCDIF1_PRE_DIV_OFFSET));
- /* Set the post divider */
- clrsetbits_le32(&imx_ccm->cbcmr,
- MXC_CCM_CBCMR_LCDIF1_PODF_MASK,
- ((postd - 1) <<
- MXC_CCM_CBCMR_LCDIF1_PODF_OFFSET));
+ /* Set the post divider */
+ clrsetbits_le32(&imx_ccm->cbcmr,
+ MXC_CCM_CBCMR_LCDIF1_PODF_MASK,
+ ((postd - 1) <<
+ MXC_CCM_CBCMR_LCDIF1_PODF_OFFSET));
+ } else {
+ /* Select pre-lcd clock to PLL5 and set pre divider */
+ clrsetbits_le32(&imx_ccm->cscdr2,
+ MXC_CCM_CSCDR2_LCDIF_PIX_CLK_SEL_MASK |
+ MXC_CCM_CSCDR2_LCDIF_PIX_PRE_DIV_MASK,
+ (0x2 << MXC_CCM_CSCDR2_LCDIF_PIX_CLK_SEL_OFFSET) |
+ ((pred - 1) <<
+ MXC_CCM_CSCDR2_LCDIF_PIX_PRE_DIV_OFFSET));
+
+ /* Set the post divider */
+ clrsetbits_le32(&imx_ccm->cscmr1,
+ MXC_CCM_CSCMR1_LCDIF_PIX_PODF_MASK,
+ (((postd - 1)^0x6) <<
+ MXC_CCM_CSCMR1_LCDIF_PIX_PODF_OFFSET));
+ }
+
+ enable_lcdif_clock(base_addr, 1);
} else if (is_mx6sx()) {
/* Setting LCDIF2 for i.MX6SX */
if (enable_pll_video(pll_div, pll_num, pll_denom, post_div))
return;
+ enable_lcdif_clock(base_addr, 0);
/* Select pre-lcd clock to PLL5 and set pre divider */
clrsetbits_le32(&imx_ccm->cscdr2,
MXC_CCM_CSCDR2_LCDIF2_PRED_SEL_MASK |
@@ -731,10 +762,12 @@
MXC_CCM_CSCMR1_LCDIF2_PODF_MASK,
((postd - 1) <<
MXC_CCM_CSCMR1_LCDIF2_PODF_OFFSET));
+
+ enable_lcdif_clock(base_addr, 1);
}
}
-int enable_lcdif_clock(u32 base_addr)
+int enable_lcdif_clock(u32 base_addr, bool enable)
{
u32 reg = 0;
u32 lcdif_clk_sel_mask, lcdif_ccgr3_mask;
@@ -754,7 +787,7 @@
MXC_CCM_CCGR3_DISP_AXI_MASK) :
(MXC_CCM_CCGR3_LCDIF1_PIX_MASK |
MXC_CCM_CCGR3_DISP_AXI_MASK);
- } else if (is_mx6ul() || is_mx6ull()) {
+ } else if (is_mx6ul() || is_mx6ull() || is_mx6sll()) {
if (base_addr != LCDIF1_BASE_ADDR) {
puts("Wrong LCD interface!\n");
return -EINVAL;
@@ -762,23 +795,59 @@
/* Set to pre-mux clock at default */
lcdif_clk_sel_mask = MXC_CCM_CSCDR2_LCDIF1_CLK_SEL_MASK;
lcdif_ccgr3_mask = MXC_CCM_CCGR3_LCDIF1_PIX_MASK;
+ } else if (is_mx6sl()) {
+ if (base_addr != LCDIF1_BASE_ADDR) {
+ puts("Wrong LCD interface!\n");
+ return -EINVAL;
+ }
+
+ reg = readl(&imx_ccm->CCGR3);
+ reg &= ~(MXC_CCM_CCGR3_LCDIF_AXI_MASK |
+ MXC_CCM_CCGR3_LCDIF_PIX_MASK);
+ writel(reg, &imx_ccm->CCGR3);
+
+ if (enable) {
+ reg = readl(&imx_ccm->cscdr3);
+ reg &= ~MXC_CCM_CSCDR3_LCDIF_AXI_CLK_SEL_MASK;
+ reg |= 1 << MXC_CCM_CSCDR3_LCDIF_AXI_CLK_SEL_OFFSET;
+ writel(reg, &imx_ccm->cscdr3);
+
+ reg = readl(&imx_ccm->CCGR3);
+ reg |= MXC_CCM_CCGR3_LCDIF_AXI_MASK |
+ MXC_CCM_CCGR3_LCDIF_PIX_MASK;
+ writel(reg, &imx_ccm->CCGR3);
+ }
+
+ return 0;
} else {
return 0;
}
- reg = readl(&imx_ccm->cscdr2);
- reg &= ~lcdif_clk_sel_mask;
- writel(reg, &imx_ccm->cscdr2);
-
- /* Enable the LCDIF pix clock */
+ /* Gate LCDIF clock first */
reg = readl(&imx_ccm->CCGR3);
- reg |= lcdif_ccgr3_mask;
+ reg &= ~lcdif_ccgr3_mask;
writel(reg, &imx_ccm->CCGR3);
reg = readl(&imx_ccm->CCGR2);
- reg |= MXC_CCM_CCGR2_LCD_MASK;
+ reg &= ~MXC_CCM_CCGR2_LCD_MASK;
writel(reg, &imx_ccm->CCGR2);
+ if (enable) {
+ /* Select pre-mux */
+ reg = readl(&imx_ccm->cscdr2);
+ reg &= ~lcdif_clk_sel_mask;
+ writel(reg, &imx_ccm->cscdr2);
+
+ /* Enable the LCDIF pix clock */
+ reg = readl(&imx_ccm->CCGR3);
+ reg |= lcdif_ccgr3_mask;
+ writel(reg, &imx_ccm->CCGR3);
+
+ reg = readl(&imx_ccm->CCGR2);
+ reg |= MXC_CCM_CCGR2_LCD_MASK;
+ writel(reg, &imx_ccm->CCGR2);
+ }
+
return 0;
}
#endif
@@ -916,6 +985,16 @@
u32 cscmr1 = __raw_readl(&imx_ccm->cscmr1);
u32 cscdr1 = __raw_readl(&imx_ccm->cscdr1);
+ if (is_mx6ul() || is_mx6ull()) {
+ if (port > 1)
+ return 0;
+ }
+
+ if (is_mx6sll()) {
+ if (port > 2)
+ return 0;
+ }
+
switch (port) {
case 0:
usdhc_podf = (cscdr1 & MXC_CCM_CSCDR1_USDHC1_PODF_MASK) >>
@@ -1079,7 +1158,7 @@
{
u32 reg;
- if (is_mx6ull()) {
+ if (is_mx6ull() || is_mx6sll()) {
/* CG5, DCP clock */
reg = __raw_readl(&imx_ccm->CCGR0);
if (enable)
diff --git a/arch/arm/cpu/armv8/zynqmp/Kconfig b/arch/arm/cpu/armv8/zynqmp/Kconfig
index f354aae..e175e6e 100644
--- a/arch/arm/cpu/armv8/zynqmp/Kconfig
+++ b/arch/arm/cpu/armv8/zynqmp/Kconfig
@@ -43,6 +43,7 @@
config BOOT_INIT_FILE
string "boot.bin init register filename"
+ depends on SPL
default ""
help
Add register writes to boot.bin format (max 256 pairs).
diff --git a/arch/arm/dts/Makefile b/arch/arm/dts/Makefile
index f437469..3ee608b 100644
--- a/arch/arm/dts/Makefile
+++ b/arch/arm/dts/Makefile
@@ -293,9 +293,15 @@
pcm052.dtb \
bk4r1.dtb
+dtb-$(CONFIG_MX53) += imx53-cx9020.dtb
+
dtb-$(CONFIG_MX6) += imx6ull-14x14-evk.dtb \
+ imx6sll-evk.dtb \
imx6dl-icore.dtb \
- imx6q-icore.dtb
+ imx6dl-icore-rqs.dtb \
+ imx6q-icore.dtb \
+ imx6q-icore-rqs.dtb \
+ imx6ul-geam-kit.dtb
dtb-$(CONFIG_MX7) += imx7-colibri.dtb
diff --git a/arch/arm/dts/imx53-cx9020.dts b/arch/arm/dts/imx53-cx9020.dts
new file mode 100644
index 0000000..9610301
--- /dev/null
+++ b/arch/arm/dts/imx53-cx9020.dts
@@ -0,0 +1,190 @@
+/*
+ * Copyright 2016 Beckhoff Automation
+ * Copyright 2011 Freescale Semiconductor, Inc.
+ * Copyright 2011 Linaro Ltd.
+ *
+ * SPDX-License-Identifier: GPL-2.0+ or X11
+ */
+
+/dts-v1/;
+#include "imx53.dtsi"
+
+#define MX53_PAD_EIM_D26__UART2_RXD_MUX 0x144 0x48c 0x880 0x2 0x0
+#define MX53_PAD_EIM_D27__UART2_TXD_MUX 0x148 0x490 0x000 0x2 0x0
+#define MX53_PAD_EIM_D28__UART2_RTS 0x14c 0x494 0x87c 0x2 0x0
+#define MX53_PAD_EIM_D29__UART2_CTS 0x150 0x498 0x000 0x2 0x0
+
+/ {
+ model = "Beckhoff CX9020-0100 i.MX53";
+ compatible = "fsl,imx53-qsb", "fsl,imx53";
+
+ chosen {
+ stdout-path = &uart2;
+ };
+};
+
+&iomuxc {
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_hog>;
+
+ imx53-qsb {
+ pinctrl_hog: hoggrp {
+ fsl,pins = <
+ MX53_PAD_GPIO_0__CCM_SSI_EXT1_CLK 0x80000000
+ MX53_PAD_GPIO_8__GPIO1_8 0x80000000
+ MX53_PAD_PATA_DATA14__GPIO2_14 0x80000000
+ MX53_PAD_PATA_DATA15__GPIO2_15 0x80000000
+ MX53_PAD_GPIO_1__GPIO1_1 0x80000000
+ MX53_PAD_GPIO_4__GPIO1_4 0x80000000
+ MX53_PAD_PATA_DA_0__GPIO7_6 0x80000000
+ MX53_PAD_PATA_DA_2__GPIO7_8 0x80000000
+ MX53_PAD_GPIO_16__GPIO7_11 0x80000000
+
+ MX53_PAD_EIM_OE__EMI_WEIM_OE 0x80000000
+ MX53_PAD_EIM_WAIT__EMI_WEIM_WAIT 0x80000000
+ MX53_PAD_EIM_LBA__EMI_WEIM_LBA 0x80000000
+ MX53_PAD_EIM_RW__EMI_WEIM_RW 0x80000000
+ MX53_PAD_EIM_EB0__EMI_WEIM_EB_0 0x80000000
+ MX53_PAD_EIM_EB1__EMI_WEIM_EB_1 0x80000000
+ MX53_PAD_EIM_EB2__EMI_WEIM_EB_2 0x80000000
+ MX53_PAD_EIM_EB3__EMI_WEIM_EB_3 0x80000000
+ MX53_PAD_EIM_CS0__EMI_WEIM_CS_0 0x80000000
+ MX53_PAD_EIM_CS1__EMI_WEIM_CS_1 0x80000000
+ MX53_PAD_EIM_A16__EMI_WEIM_A_16 0x80000000
+ MX53_PAD_EIM_A17__EMI_WEIM_A_17 0x80000000
+ MX53_PAD_EIM_A18__EMI_WEIM_A_18 0x80000000
+ MX53_PAD_EIM_A19__EMI_WEIM_A_19 0x80000000
+ MX53_PAD_EIM_A20__EMI_WEIM_A_20 0x80000000
+ MX53_PAD_EIM_A21__EMI_WEIM_A_21 0x80000000
+ MX53_PAD_EIM_A22__EMI_WEIM_A_22 0x80000000
+ MX53_PAD_EIM_DA0__EMI_NAND_WEIM_DA_0 0xa4
+ MX53_PAD_EIM_DA1__EMI_NAND_WEIM_DA_1 0xa4
+ MX53_PAD_EIM_DA2__EMI_NAND_WEIM_DA_2 0xa4
+ MX53_PAD_EIM_DA3__EMI_NAND_WEIM_DA_3 0xa4
+ MX53_PAD_EIM_DA4__EMI_NAND_WEIM_DA_4 0xa4
+ MX53_PAD_EIM_DA5__EMI_NAND_WEIM_DA_5 0xa4
+ MX53_PAD_EIM_DA6__EMI_NAND_WEIM_DA_6 0xa4
+ MX53_PAD_EIM_DA7__EMI_NAND_WEIM_DA_7 0xa4
+ MX53_PAD_EIM_DA8__EMI_NAND_WEIM_DA_8 0xa4
+ MX53_PAD_EIM_DA9__EMI_NAND_WEIM_DA_9 0xa4
+ MX53_PAD_EIM_DA10__EMI_NAND_WEIM_DA_10 0xa4
+ MX53_PAD_EIM_DA11__EMI_NAND_WEIM_DA_11 0xa4
+ MX53_PAD_EIM_DA12__EMI_NAND_WEIM_DA_12 0xa4
+ MX53_PAD_EIM_DA13__EMI_NAND_WEIM_DA_13 0xa4
+ MX53_PAD_EIM_DA14__EMI_NAND_WEIM_DA_14 0xa4
+ MX53_PAD_EIM_DA15__EMI_NAND_WEIM_DA_15 0xa4
+ MX53_PAD_PATA_DATA0__EMI_NANDF_D_0 0xa4
+ MX53_PAD_PATA_DATA1__EMI_NANDF_D_1 0xa4
+ MX53_PAD_PATA_DATA2__EMI_NANDF_D_2 0xa4
+ MX53_PAD_PATA_DATA3__EMI_NANDF_D_3 0xa4
+ MX53_PAD_PATA_DATA4__EMI_NANDF_D_4 0xa4
+ MX53_PAD_PATA_DATA5__EMI_NANDF_D_5 0xa4
+ MX53_PAD_PATA_DATA6__EMI_NANDF_D_6 0xa4
+ MX53_PAD_PATA_DATA7__EMI_NANDF_D_7 0xa4
+ MX53_PAD_PATA_DATA8__EMI_NANDF_D_8 0xa4
+ MX53_PAD_PATA_DATA9__EMI_NANDF_D_9 0xa4
+ MX53_PAD_PATA_DATA10__EMI_NANDF_D_10 0xa4
+ MX53_PAD_PATA_DATA11__EMI_NANDF_D_11 0xa4
+ MX53_PAD_PATA_DATA12__EMI_NANDF_D_12 0xa4
+ MX53_PAD_PATA_DATA13__EMI_NANDF_D_13 0xa4
+ MX53_PAD_PATA_DATA14__EMI_NANDF_D_14 0xa4
+ MX53_PAD_PATA_DATA15__EMI_NANDF_D_15 0xa4
+ MX53_PAD_NANDF_CLE__GPIO6_7 0x00000001
+ MX53_PAD_NANDF_WP_B__GPIO6_9 0x00000001
+ MX53_PAD_NANDF_ALE__GPIO6_8 0x00000001
+
+ MX53_PAD_EIM_D23__GPIO3_23 0x80000000
+
+ MX53_PAD_KEY_COL0__AUDMUX_AUD5_TXC 0x80000000
+ MX53_PAD_KEY_ROW0__AUDMUX_AUD5_TXD 0x80000000
+ MX53_PAD_KEY_COL1__AUDMUX_AUD5_TXFS 0x80000000
+ MX53_PAD_KEY_ROW1__AUDMUX_AUD5_RXD 0x80000000
+
+ MX53_PAD_SD1_DATA0__ESDHC1_DAT0 0x1d5
+ MX53_PAD_SD1_DATA1__ESDHC1_DAT1 0x1d5
+ MX53_PAD_SD1_DATA2__ESDHC1_DAT2 0x1d5
+ MX53_PAD_SD1_DATA3__ESDHC1_DAT3 0x1d5
+ MX53_PAD_SD1_CMD__ESDHC1_CMD 0x1d5
+ MX53_PAD_SD1_CLK__ESDHC1_CLK 0x1d5
+
+ MX53_PAD_SD2_DATA0__ESDHC2_DAT0 0x1d5
+ MX53_PAD_SD2_DATA1__ESDHC2_DAT1 0x1d5
+ MX53_PAD_SD2_DATA2__ESDHC2_DAT2 0x1d5
+ MX53_PAD_SD2_DATA3__ESDHC2_DAT3 0x1d5
+ MX53_PAD_SD2_CMD__ESDHC2_CMD 0x1d5
+ MX53_PAD_SD2_CLK__ESDHC2_CLK 0x1d5
+
+ MX53_PAD_FEC_MDC__FEC_MDC 0x80000000
+ MX53_PAD_FEC_MDIO__FEC_MDIO 0x80000000
+ MX53_PAD_FEC_REF_CLK__FEC_TX_CLK 0x80000000
+ MX53_PAD_FEC_RX_ER__FEC_RX_ER 0x80000000
+ MX53_PAD_FEC_CRS_DV__FEC_RX_DV 0x80000000
+ MX53_PAD_FEC_RXD1__FEC_RDATA_1 0x80000000
+ MX53_PAD_FEC_RXD0__FEC_RDATA_0 0x80000000
+ MX53_PAD_FEC_TX_EN__FEC_TX_EN 0x80000000
+ MX53_PAD_FEC_TXD1__FEC_TDATA_1 0x80000000
+ MX53_PAD_FEC_TXD0__FEC_TDATA_0 0x80000000
+
+ MX53_PAD_CSI0_DAT8__I2C1_SDA 0x400001ec
+ MX53_PAD_CSI0_DAT9__I2C1_SCL 0x400001ec
+
+ MX53_PAD_KEY_ROW3__I2C2_SDA 0xc0000000
+ MX53_PAD_KEY_COL3__I2C2_SCL 0xc0000000
+
+ MX53_PAD_DI0_DISP_CLK__IPU_DI0_DISP_CLK 0x5
+ MX53_PAD_DI0_PIN15__IPU_DI0_PIN15 0x5
+ MX53_PAD_DI0_PIN2__IPU_DI0_PIN2 0x5
+ MX53_PAD_DI0_PIN3__IPU_DI0_PIN3 0x5
+ MX53_PAD_DI0_PIN4__IPU_DI0_PIN4 0x5
+ MX53_PAD_DISP0_DAT0__IPU_DISP0_DAT_0 0x5
+ MX53_PAD_DISP0_DAT1__IPU_DISP0_DAT_1 0x5
+ MX53_PAD_DISP0_DAT2__IPU_DISP0_DAT_2 0x5
+ MX53_PAD_DISP0_DAT3__IPU_DISP0_DAT_3 0x5
+ MX53_PAD_DISP0_DAT4__IPU_DISP0_DAT_4 0x5
+ MX53_PAD_DISP0_DAT5__IPU_DISP0_DAT_5 0x5
+ MX53_PAD_DISP0_DAT6__IPU_DISP0_DAT_6 0x5
+ MX53_PAD_DISP0_DAT7__IPU_DISP0_DAT_7 0x5
+ MX53_PAD_DISP0_DAT8__IPU_DISP0_DAT_8 0x5
+ MX53_PAD_DISP0_DAT9__IPU_DISP0_DAT_9 0x5
+ MX53_PAD_DISP0_DAT10__IPU_DISP0_DAT_10 0x5
+ MX53_PAD_DISP0_DAT11__IPU_DISP0_DAT_11 0x5
+ MX53_PAD_DISP0_DAT12__IPU_DISP0_DAT_12 0x5
+ MX53_PAD_DISP0_DAT13__IPU_DISP0_DAT_13 0x5
+ MX53_PAD_DISP0_DAT14__IPU_DISP0_DAT_14 0x5
+ MX53_PAD_DISP0_DAT15__IPU_DISP0_DAT_15 0x5
+ MX53_PAD_DISP0_DAT16__IPU_DISP0_DAT_16 0x5
+ MX53_PAD_DISP0_DAT17__IPU_DISP0_DAT_17 0x5
+ MX53_PAD_DISP0_DAT18__IPU_DISP0_DAT_18 0x5
+ MX53_PAD_DISP0_DAT19__IPU_DISP0_DAT_19 0x5
+ MX53_PAD_DISP0_DAT20__IPU_DISP0_DAT_20 0x5
+ MX53_PAD_DISP0_DAT21__IPU_DISP0_DAT_21 0x5
+ MX53_PAD_DISP0_DAT22__IPU_DISP0_DAT_22 0x5
+ MX53_PAD_DISP0_DAT23__IPU_DISP0_DAT_23 0x5
+ >;
+ };
+
+ pinctrl_uart2: uart2grp {
+ fsl,pins = <
+ MX53_PAD_EIM_D26__UART2_RXD_MUX 0x1e4
+ MX53_PAD_EIM_D27__UART2_TXD_MUX 0x1e4
+ MX53_PAD_EIM_D28__UART2_RTS 0x1e4
+ MX53_PAD_EIM_D29__UART2_CTS 0x1e4
+ >;
+ };
+ };
+};
+
+&uart2 {
+ pinctrl-names = "default";
+ uart-has-rtscts;
+ fsl,dte-mode;
+ pinctrl-0 = <&pinctrl_uart2>;
+ status = "okay";
+};
+
+&fec {
+ pinctrl-names = "default";
+ phy-mode = "rmii";
+ phy-reset-gpios = <&gpio7 6 0>;
+ status = "okay";
+};
diff --git a/arch/arm/dts/imx53-pinfunc.h b/arch/arm/dts/imx53-pinfunc.h
new file mode 100644
index 0000000..aec406b
--- /dev/null
+++ b/arch/arm/dts/imx53-pinfunc.h
@@ -0,0 +1,1189 @@
+/*
+ * Copyright 2013 Freescale Semiconductor, Inc.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ *
+ */
+
+#ifndef __DTS_IMX53_PINFUNC_H
+#define __DTS_IMX53_PINFUNC_H
+
+/*
+ * The pin function ID is a tuple of
+ * <mux_reg conf_reg input_reg mux_mode input_val>
+ */
+#define MX53_PAD_GPIO_19__KPP_COL_5 0x020 0x348 0x840 0x0 0x0
+#define MX53_PAD_GPIO_19__GPIO4_5 0x020 0x348 0x000 0x1 0x0
+#define MX53_PAD_GPIO_19__CCM_CLKO 0x020 0x348 0x000 0x2 0x0
+#define MX53_PAD_GPIO_19__SPDIF_OUT1 0x020 0x348 0x000 0x3 0x0
+#define MX53_PAD_GPIO_19__RTC_CE_RTC_EXT_TRIG2 0x020 0x348 0x000 0x4 0x0
+#define MX53_PAD_GPIO_19__ECSPI1_RDY 0x020 0x348 0x000 0x5 0x0
+#define MX53_PAD_GPIO_19__FEC_TDATA_3 0x020 0x348 0x000 0x6 0x0
+#define MX53_PAD_GPIO_19__SRC_INT_BOOT 0x020 0x348 0x000 0x7 0x0
+#define MX53_PAD_KEY_COL0__KPP_COL_0 0x024 0x34c 0x000 0x0 0x0
+#define MX53_PAD_KEY_COL0__GPIO4_6 0x024 0x34c 0x000 0x1 0x0
+#define MX53_PAD_KEY_COL0__AUDMUX_AUD5_TXC 0x024 0x34c 0x758 0x2 0x0
+#define MX53_PAD_KEY_COL0__UART4_TXD_MUX 0x024 0x34c 0x000 0x4 0x0
+#define MX53_PAD_KEY_COL0__ECSPI1_SCLK 0x024 0x34c 0x79c 0x5 0x0
+#define MX53_PAD_KEY_COL0__FEC_RDATA_3 0x024 0x34c 0x000 0x6 0x0
+#define MX53_PAD_KEY_COL0__SRC_ANY_PU_RST 0x024 0x34c 0x000 0x7 0x0
+#define MX53_PAD_KEY_ROW0__KPP_ROW_0 0x028 0x350 0x000 0x0 0x0
+#define MX53_PAD_KEY_ROW0__GPIO4_7 0x028 0x350 0x000 0x1 0x0
+#define MX53_PAD_KEY_ROW0__AUDMUX_AUD5_TXD 0x028 0x350 0x74c 0x2 0x0
+#define MX53_PAD_KEY_ROW0__UART4_RXD_MUX 0x028 0x350 0x890 0x4 0x1
+#define MX53_PAD_KEY_ROW0__ECSPI1_MOSI 0x028 0x350 0x7a4 0x5 0x0
+#define MX53_PAD_KEY_ROW0__FEC_TX_ER 0x028 0x350 0x000 0x6 0x0
+#define MX53_PAD_KEY_COL1__KPP_COL_1 0x02c 0x354 0x000 0x0 0x0
+#define MX53_PAD_KEY_COL1__GPIO4_8 0x02c 0x354 0x000 0x1 0x0
+#define MX53_PAD_KEY_COL1__AUDMUX_AUD5_TXFS 0x02c 0x354 0x75c 0x2 0x0
+#define MX53_PAD_KEY_COL1__UART5_TXD_MUX 0x02c 0x354 0x000 0x4 0x0
+#define MX53_PAD_KEY_COL1__ECSPI1_MISO 0x02c 0x354 0x7a0 0x5 0x0
+#define MX53_PAD_KEY_COL1__FEC_RX_CLK 0x02c 0x354 0x808 0x6 0x0
+#define MX53_PAD_KEY_COL1__USBPHY1_TXREADY 0x02c 0x354 0x000 0x7 0x0
+#define MX53_PAD_KEY_ROW1__KPP_ROW_1 0x030 0x358 0x000 0x0 0x0
+#define MX53_PAD_KEY_ROW1__GPIO4_9 0x030 0x358 0x000 0x1 0x0
+#define MX53_PAD_KEY_ROW1__AUDMUX_AUD5_RXD 0x030 0x358 0x748 0x2 0x0
+#define MX53_PAD_KEY_ROW1__UART5_RXD_MUX 0x030 0x358 0x898 0x4 0x1
+#define MX53_PAD_KEY_ROW1__ECSPI1_SS0 0x030 0x358 0x7a8 0x5 0x0
+#define MX53_PAD_KEY_ROW1__FEC_COL 0x030 0x358 0x800 0x6 0x0
+#define MX53_PAD_KEY_ROW1__USBPHY1_RXVALID 0x030 0x358 0x000 0x7 0x0
+#define MX53_PAD_KEY_COL2__KPP_COL_2 0x034 0x35c 0x000 0x0 0x0
+#define MX53_PAD_KEY_COL2__GPIO4_10 0x034 0x35c 0x000 0x1 0x0
+#define MX53_PAD_KEY_COL2__CAN1_TXCAN 0x034 0x35c 0x000 0x2 0x0
+#define MX53_PAD_KEY_COL2__FEC_MDIO 0x034 0x35c 0x804 0x4 0x0
+#define MX53_PAD_KEY_COL2__ECSPI1_SS1 0x034 0x35c 0x7ac 0x5 0x0
+#define MX53_PAD_KEY_COL2__FEC_RDATA_2 0x034 0x35c 0x000 0x6 0x0
+#define MX53_PAD_KEY_COL2__USBPHY1_RXACTIVE 0x034 0x35c 0x000 0x7 0x0
+#define MX53_PAD_KEY_ROW2__KPP_ROW_2 0x038 0x360 0x000 0x0 0x0
+#define MX53_PAD_KEY_ROW2__GPIO4_11 0x038 0x360 0x000 0x1 0x0
+#define MX53_PAD_KEY_ROW2__CAN1_RXCAN 0x038 0x360 0x760 0x2 0x0
+#define MX53_PAD_KEY_ROW2__FEC_MDC 0x038 0x360 0x000 0x4 0x0
+#define MX53_PAD_KEY_ROW2__ECSPI1_SS2 0x038 0x360 0x7b0 0x5 0x0
+#define MX53_PAD_KEY_ROW2__FEC_TDATA_2 0x038 0x360 0x000 0x6 0x0
+#define MX53_PAD_KEY_ROW2__USBPHY1_RXERROR 0x038 0x360 0x000 0x7 0x0
+#define MX53_PAD_KEY_COL3__KPP_COL_3 0x03c 0x364 0x000 0x0 0x0
+#define MX53_PAD_KEY_COL3__GPIO4_12 0x03c 0x364 0x000 0x1 0x0
+#define MX53_PAD_KEY_COL3__USBOH3_H2_DP 0x03c 0x364 0x000 0x2 0x0
+#define MX53_PAD_KEY_COL3__SPDIF_IN1 0x03c 0x364 0x870 0x3 0x0
+#define MX53_PAD_KEY_COL3__I2C2_SCL 0x03c 0x364 0x81c 0x4 0x0
+#define MX53_PAD_KEY_COL3__ECSPI1_SS3 0x03c 0x364 0x7b4 0x5 0x0
+#define MX53_PAD_KEY_COL3__FEC_CRS 0x03c 0x364 0x000 0x6 0x0
+#define MX53_PAD_KEY_COL3__USBPHY1_SIECLOCK 0x03c 0x364 0x000 0x7 0x0
+#define MX53_PAD_KEY_ROW3__KPP_ROW_3 0x040 0x368 0x000 0x0 0x0
+#define MX53_PAD_KEY_ROW3__GPIO4_13 0x040 0x368 0x000 0x1 0x0
+#define MX53_PAD_KEY_ROW3__USBOH3_H2_DM 0x040 0x368 0x000 0x2 0x0
+#define MX53_PAD_KEY_ROW3__CCM_ASRC_EXT_CLK 0x040 0x368 0x768 0x3 0x0
+#define MX53_PAD_KEY_ROW3__I2C2_SDA 0x040 0x368 0x820 0x4 0x0
+#define MX53_PAD_KEY_ROW3__OSC32K_32K_OUT 0x040 0x368 0x000 0x5 0x0
+#define MX53_PAD_KEY_ROW3__CCM_PLL4_BYP 0x040 0x368 0x77c 0x6 0x0
+#define MX53_PAD_KEY_ROW3__USBPHY1_LINESTATE_0 0x040 0x368 0x000 0x7 0x0
+#define MX53_PAD_KEY_COL4__KPP_COL_4 0x044 0x36c 0x000 0x0 0x0
+#define MX53_PAD_KEY_COL4__GPIO4_14 0x044 0x36c 0x000 0x1 0x0
+#define MX53_PAD_KEY_COL4__CAN2_TXCAN 0x044 0x36c 0x000 0x2 0x0
+#define MX53_PAD_KEY_COL4__IPU_SISG_4 0x044 0x36c 0x000 0x3 0x0
+#define MX53_PAD_KEY_COL4__UART5_RTS 0x044 0x36c 0x894 0x4 0x0
+#define MX53_PAD_KEY_COL4__USBOH3_USBOTG_OC 0x044 0x36c 0x89c 0x5 0x0
+#define MX53_PAD_KEY_COL4__USBPHY1_LINESTATE_1 0x044 0x36c 0x000 0x7 0x0
+#define MX53_PAD_KEY_ROW4__KPP_ROW_4 0x048 0x370 0x000 0x0 0x0
+#define MX53_PAD_KEY_ROW4__GPIO4_15 0x048 0x370 0x000 0x1 0x0
+#define MX53_PAD_KEY_ROW4__CAN2_RXCAN 0x048 0x370 0x764 0x2 0x0
+#define MX53_PAD_KEY_ROW4__IPU_SISG_5 0x048 0x370 0x000 0x3 0x0
+#define MX53_PAD_KEY_ROW4__UART5_CTS 0x048 0x370 0x000 0x4 0x0
+#define MX53_PAD_KEY_ROW4__USBOH3_USBOTG_PWR 0x048 0x370 0x000 0x5 0x0
+#define MX53_PAD_KEY_ROW4__USBPHY1_VBUSVALID 0x048 0x370 0x000 0x7 0x0
+#define MX53_PAD_DI0_DISP_CLK__IPU_DI0_DISP_CLK 0x04c 0x378 0x000 0x0 0x0
+#define MX53_PAD_DI0_DISP_CLK__GPIO4_16 0x04c 0x378 0x000 0x1 0x0
+#define MX53_PAD_DI0_DISP_CLK__USBOH3_USBH2_DIR 0x04c 0x378 0x000 0x2 0x0
+#define MX53_PAD_DI0_DISP_CLK__SDMA_DEBUG_CORE_STATE_0 0x04c 0x378 0x000 0x5 0x0
+#define MX53_PAD_DI0_DISP_CLK__EMI_EMI_DEBUG_0 0x04c 0x378 0x000 0x6 0x0
+#define MX53_PAD_DI0_DISP_CLK__USBPHY1_AVALID 0x04c 0x378 0x000 0x7 0x0
+#define MX53_PAD_DI0_PIN15__IPU_DI0_PIN15 0x050 0x37c 0x000 0x0 0x0
+#define MX53_PAD_DI0_PIN15__GPIO4_17 0x050 0x37c 0x000 0x1 0x0
+#define MX53_PAD_DI0_PIN15__AUDMUX_AUD6_TXC 0x050 0x37c 0x000 0x2 0x0
+#define MX53_PAD_DI0_PIN15__SDMA_DEBUG_CORE_STATE_1 0x050 0x37c 0x000 0x5 0x0
+#define MX53_PAD_DI0_PIN15__EMI_EMI_DEBUG_1 0x050 0x37c 0x000 0x6 0x0
+#define MX53_PAD_DI0_PIN15__USBPHY1_BVALID 0x050 0x37c 0x000 0x7 0x0
+#define MX53_PAD_DI0_PIN2__IPU_DI0_PIN2 0x054 0x380 0x000 0x0 0x0
+#define MX53_PAD_DI0_PIN2__GPIO4_18 0x054 0x380 0x000 0x1 0x0
+#define MX53_PAD_DI0_PIN2__AUDMUX_AUD6_TXD 0x054 0x380 0x000 0x2 0x0
+#define MX53_PAD_DI0_PIN2__SDMA_DEBUG_CORE_STATE_2 0x054 0x380 0x000 0x5 0x0
+#define MX53_PAD_DI0_PIN2__EMI_EMI_DEBUG_2 0x054 0x380 0x000 0x6 0x0
+#define MX53_PAD_DI0_PIN2__USBPHY1_ENDSESSION 0x054 0x380 0x000 0x7 0x0
+#define MX53_PAD_DI0_PIN3__IPU_DI0_PIN3 0x058 0x384 0x000 0x0 0x0
+#define MX53_PAD_DI0_PIN3__GPIO4_19 0x058 0x384 0x000 0x1 0x0
+#define MX53_PAD_DI0_PIN3__AUDMUX_AUD6_TXFS 0x058 0x384 0x000 0x2 0x0
+#define MX53_PAD_DI0_PIN3__SDMA_DEBUG_CORE_STATE_3 0x058 0x384 0x000 0x5 0x0
+#define MX53_PAD_DI0_PIN3__EMI_EMI_DEBUG_3 0x058 0x384 0x000 0x6 0x0
+#define MX53_PAD_DI0_PIN3__USBPHY1_IDDIG 0x058 0x384 0x000 0x7 0x0
+#define MX53_PAD_DI0_PIN4__IPU_DI0_PIN4 0x05c 0x388 0x000 0x0 0x0
+#define MX53_PAD_DI0_PIN4__GPIO4_20 0x05c 0x388 0x000 0x1 0x0
+#define MX53_PAD_DI0_PIN4__AUDMUX_AUD6_RXD 0x05c 0x388 0x000 0x2 0x0
+#define MX53_PAD_DI0_PIN4__ESDHC1_WP 0x05c 0x388 0x7fc 0x3 0x0
+#define MX53_PAD_DI0_PIN4__SDMA_DEBUG_YIELD 0x05c 0x388 0x000 0x5 0x0
+#define MX53_PAD_DI0_PIN4__EMI_EMI_DEBUG_4 0x05c 0x388 0x000 0x6 0x0
+#define MX53_PAD_DI0_PIN4__USBPHY1_HOSTDISCONNECT 0x05c 0x388 0x000 0x7 0x0
+#define MX53_PAD_DISP0_DAT0__IPU_DISP0_DAT_0 0x060 0x38c 0x000 0x0 0x0
+#define MX53_PAD_DISP0_DAT0__GPIO4_21 0x060 0x38c 0x000 0x1 0x0
+#define MX53_PAD_DISP0_DAT0__CSPI_SCLK 0x060 0x38c 0x780 0x2 0x0
+#define MX53_PAD_DISP0_DAT0__USBOH3_USBH2_DATA_0 0x060 0x38c 0x000 0x3 0x0
+#define MX53_PAD_DISP0_DAT0__SDMA_DEBUG_CORE_RUN 0x060 0x38c 0x000 0x5 0x0
+#define MX53_PAD_DISP0_DAT0__EMI_EMI_DEBUG_5 0x060 0x38c 0x000 0x6 0x0
+#define MX53_PAD_DISP0_DAT0__USBPHY2_TXREADY 0x060 0x38c 0x000 0x7 0x0
+#define MX53_PAD_DISP0_DAT1__IPU_DISP0_DAT_1 0x064 0x390 0x000 0x0 0x0
+#define MX53_PAD_DISP0_DAT1__GPIO4_22 0x064 0x390 0x000 0x1 0x0
+#define MX53_PAD_DISP0_DAT1__CSPI_MOSI 0x064 0x390 0x788 0x2 0x0
+#define MX53_PAD_DISP0_DAT1__USBOH3_USBH2_DATA_1 0x064 0x390 0x000 0x3 0x0
+#define MX53_PAD_DISP0_DAT1__SDMA_DEBUG_EVENT_CHANNEL_SEL 0x064 0x390 0x000 0x5 0x0
+#define MX53_PAD_DISP0_DAT1__EMI_EMI_DEBUG_6 0x064 0x390 0x000 0x6 0x0
+#define MX53_PAD_DISP0_DAT1__USBPHY2_RXVALID 0x064 0x390 0x000 0x7 0x0
+#define MX53_PAD_DISP0_DAT2__IPU_DISP0_DAT_2 0x068 0x394 0x000 0x0 0x0
+#define MX53_PAD_DISP0_DAT2__GPIO4_23 0x068 0x394 0x000 0x1 0x0
+#define MX53_PAD_DISP0_DAT2__CSPI_MISO 0x068 0x394 0x784 0x2 0x0
+#define MX53_PAD_DISP0_DAT2__USBOH3_USBH2_DATA_2 0x068 0x394 0x000 0x3 0x0
+#define MX53_PAD_DISP0_DAT2__SDMA_DEBUG_MODE 0x068 0x394 0x000 0x5 0x0
+#define MX53_PAD_DISP0_DAT2__EMI_EMI_DEBUG_7 0x068 0x394 0x000 0x6 0x0
+#define MX53_PAD_DISP0_DAT2__USBPHY2_RXACTIVE 0x068 0x394 0x000 0x7 0x0
+#define MX53_PAD_DISP0_DAT3__IPU_DISP0_DAT_3 0x06c 0x398 0x000 0x0 0x0
+#define MX53_PAD_DISP0_DAT3__GPIO4_24 0x06c 0x398 0x000 0x1 0x0
+#define MX53_PAD_DISP0_DAT3__CSPI_SS0 0x06c 0x398 0x78c 0x2 0x0
+#define MX53_PAD_DISP0_DAT3__USBOH3_USBH2_DATA_3 0x06c 0x398 0x000 0x3 0x0
+#define MX53_PAD_DISP0_DAT3__SDMA_DEBUG_BUS_ERROR 0x06c 0x398 0x000 0x5 0x0
+#define MX53_PAD_DISP0_DAT3__EMI_EMI_DEBUG_8 0x06c 0x398 0x000 0x6 0x0
+#define MX53_PAD_DISP0_DAT3__USBPHY2_RXERROR 0x06c 0x398 0x000 0x7 0x0
+#define MX53_PAD_DISP0_DAT4__IPU_DISP0_DAT_4 0x070 0x39c 0x000 0x0 0x0
+#define MX53_PAD_DISP0_DAT4__GPIO4_25 0x070 0x39c 0x000 0x1 0x0
+#define MX53_PAD_DISP0_DAT4__CSPI_SS1 0x070 0x39c 0x790 0x2 0x0
+#define MX53_PAD_DISP0_DAT4__USBOH3_USBH2_DATA_4 0x070 0x39c 0x000 0x3 0x0
+#define MX53_PAD_DISP0_DAT4__SDMA_DEBUG_BUS_RWB 0x070 0x39c 0x000 0x5 0x0
+#define MX53_PAD_DISP0_DAT4__EMI_EMI_DEBUG_9 0x070 0x39c 0x000 0x6 0x0
+#define MX53_PAD_DISP0_DAT4__USBPHY2_SIECLOCK 0x070 0x39c 0x000 0x7 0x0
+#define MX53_PAD_DISP0_DAT5__IPU_DISP0_DAT_5 0x074 0x3a0 0x000 0x0 0x0
+#define MX53_PAD_DISP0_DAT5__GPIO4_26 0x074 0x3a0 0x000 0x1 0x0
+#define MX53_PAD_DISP0_DAT5__CSPI_SS2 0x074 0x3a0 0x794 0x2 0x0
+#define MX53_PAD_DISP0_DAT5__USBOH3_USBH2_DATA_5 0x074 0x3a0 0x000 0x3 0x0
+#define MX53_PAD_DISP0_DAT5__SDMA_DEBUG_MATCHED_DMBUS 0x074 0x3a0 0x000 0x5 0x0
+#define MX53_PAD_DISP0_DAT5__EMI_EMI_DEBUG_10 0x074 0x3a0 0x000 0x6 0x0
+#define MX53_PAD_DISP0_DAT5__USBPHY2_LINESTATE_0 0x074 0x3a0 0x000 0x7 0x0
+#define MX53_PAD_DISP0_DAT6__IPU_DISP0_DAT_6 0x078 0x3a4 0x000 0x0 0x0
+#define MX53_PAD_DISP0_DAT6__GPIO4_27 0x078 0x3a4 0x000 0x1 0x0
+#define MX53_PAD_DISP0_DAT6__CSPI_SS3 0x078 0x3a4 0x798 0x2 0x0
+#define MX53_PAD_DISP0_DAT6__USBOH3_USBH2_DATA_6 0x078 0x3a4 0x000 0x3 0x0
+#define MX53_PAD_DISP0_DAT6__SDMA_DEBUG_RTBUFFER_WRITE 0x078 0x3a4 0x000 0x5 0x0
+#define MX53_PAD_DISP0_DAT6__EMI_EMI_DEBUG_11 0x078 0x3a4 0x000 0x6 0x0
+#define MX53_PAD_DISP0_DAT6__USBPHY2_LINESTATE_1 0x078 0x3a4 0x000 0x7 0x0
+#define MX53_PAD_DISP0_DAT7__IPU_DISP0_DAT_7 0x07c 0x3a8 0x000 0x0 0x0
+#define MX53_PAD_DISP0_DAT7__GPIO4_28 0x07c 0x3a8 0x000 0x1 0x0
+#define MX53_PAD_DISP0_DAT7__CSPI_RDY 0x07c 0x3a8 0x000 0x2 0x0
+#define MX53_PAD_DISP0_DAT7__USBOH3_USBH2_DATA_7 0x07c 0x3a8 0x000 0x3 0x0
+#define MX53_PAD_DISP0_DAT7__SDMA_DEBUG_EVENT_CHANNEL_0 0x07c 0x3a8 0x000 0x5 0x0
+#define MX53_PAD_DISP0_DAT7__EMI_EMI_DEBUG_12 0x07c 0x3a8 0x000 0x6 0x0
+#define MX53_PAD_DISP0_DAT7__USBPHY2_VBUSVALID 0x07c 0x3a8 0x000 0x7 0x0
+#define MX53_PAD_DISP0_DAT8__IPU_DISP0_DAT_8 0x080 0x3ac 0x000 0x0 0x0
+#define MX53_PAD_DISP0_DAT8__GPIO4_29 0x080 0x3ac 0x000 0x1 0x0
+#define MX53_PAD_DISP0_DAT8__PWM1_PWMO 0x080 0x3ac 0x000 0x2 0x0
+#define MX53_PAD_DISP0_DAT8__WDOG1_WDOG_B 0x080 0x3ac 0x000 0x3 0x0
+#define MX53_PAD_DISP0_DAT8__SDMA_DEBUG_EVENT_CHANNEL_1 0x080 0x3ac 0x000 0x5 0x0
+#define MX53_PAD_DISP0_DAT8__EMI_EMI_DEBUG_13 0x080 0x3ac 0x000 0x6 0x0
+#define MX53_PAD_DISP0_DAT8__USBPHY2_AVALID 0x080 0x3ac 0x000 0x7 0x0
+#define MX53_PAD_DISP0_DAT9__IPU_DISP0_DAT_9 0x084 0x3b0 0x000 0x0 0x0
+#define MX53_PAD_DISP0_DAT9__GPIO4_30 0x084 0x3b0 0x000 0x1 0x0
+#define MX53_PAD_DISP0_DAT9__PWM2_PWMO 0x084 0x3b0 0x000 0x2 0x0
+#define MX53_PAD_DISP0_DAT9__WDOG2_WDOG_B 0x084 0x3b0 0x000 0x3 0x0
+#define MX53_PAD_DISP0_DAT9__SDMA_DEBUG_EVENT_CHANNEL_2 0x084 0x3b0 0x000 0x5 0x0
+#define MX53_PAD_DISP0_DAT9__EMI_EMI_DEBUG_14 0x084 0x3b0 0x000 0x6 0x0
+#define MX53_PAD_DISP0_DAT9__USBPHY2_VSTATUS_0 0x084 0x3b0 0x000 0x7 0x0
+#define MX53_PAD_DISP0_DAT10__IPU_DISP0_DAT_10 0x088 0x3b4 0x000 0x0 0x0
+#define MX53_PAD_DISP0_DAT10__GPIO4_31 0x088 0x3b4 0x000 0x1 0x0
+#define MX53_PAD_DISP0_DAT10__USBOH3_USBH2_STP 0x088 0x3b4 0x000 0x2 0x0
+#define MX53_PAD_DISP0_DAT10__SDMA_DEBUG_EVENT_CHANNEL_3 0x088 0x3b4 0x000 0x5 0x0
+#define MX53_PAD_DISP0_DAT10__EMI_EMI_DEBUG_15 0x088 0x3b4 0x000 0x6 0x0
+#define MX53_PAD_DISP0_DAT10__USBPHY2_VSTATUS_1 0x088 0x3b4 0x000 0x7 0x0
+#define MX53_PAD_DISP0_DAT11__IPU_DISP0_DAT_11 0x08c 0x3b8 0x000 0x0 0x0
+#define MX53_PAD_DISP0_DAT11__GPIO5_5 0x08c 0x3b8 0x000 0x1 0x0
+#define MX53_PAD_DISP0_DAT11__USBOH3_USBH2_NXT 0x08c 0x3b8 0x000 0x2 0x0
+#define MX53_PAD_DISP0_DAT11__SDMA_DEBUG_EVENT_CHANNEL_4 0x08c 0x3b8 0x000 0x5 0x0
+#define MX53_PAD_DISP0_DAT11__EMI_EMI_DEBUG_16 0x08c 0x3b8 0x000 0x6 0x0
+#define MX53_PAD_DISP0_DAT11__USBPHY2_VSTATUS_2 0x08c 0x3b8 0x000 0x7 0x0
+#define MX53_PAD_DISP0_DAT12__IPU_DISP0_DAT_12 0x090 0x3bc 0x000 0x0 0x0
+#define MX53_PAD_DISP0_DAT12__GPIO5_6 0x090 0x3bc 0x000 0x1 0x0
+#define MX53_PAD_DISP0_DAT12__USBOH3_USBH2_CLK 0x090 0x3bc 0x000 0x2 0x0
+#define MX53_PAD_DISP0_DAT12__SDMA_DEBUG_EVENT_CHANNEL_5 0x090 0x3bc 0x000 0x5 0x0
+#define MX53_PAD_DISP0_DAT12__EMI_EMI_DEBUG_17 0x090 0x3bc 0x000 0x6 0x0
+#define MX53_PAD_DISP0_DAT12__USBPHY2_VSTATUS_3 0x090 0x3bc 0x000 0x7 0x0
+#define MX53_PAD_DISP0_DAT13__IPU_DISP0_DAT_13 0x094 0x3c0 0x000 0x0 0x0
+#define MX53_PAD_DISP0_DAT13__GPIO5_7 0x094 0x3c0 0x000 0x1 0x0
+#define MX53_PAD_DISP0_DAT13__AUDMUX_AUD5_RXFS 0x094 0x3c0 0x754 0x3 0x0
+#define MX53_PAD_DISP0_DAT13__SDMA_DEBUG_EVT_CHN_LINES_0 0x094 0x3c0 0x000 0x5 0x0
+#define MX53_PAD_DISP0_DAT13__EMI_EMI_DEBUG_18 0x094 0x3c0 0x000 0x6 0x0
+#define MX53_PAD_DISP0_DAT13__USBPHY2_VSTATUS_4 0x094 0x3c0 0x000 0x7 0x0
+#define MX53_PAD_DISP0_DAT14__IPU_DISP0_DAT_14 0x098 0x3c4 0x000 0x0 0x0
+#define MX53_PAD_DISP0_DAT14__GPIO5_8 0x098 0x3c4 0x000 0x1 0x0
+#define MX53_PAD_DISP0_DAT14__AUDMUX_AUD5_RXC 0x098 0x3c4 0x750 0x3 0x0
+#define MX53_PAD_DISP0_DAT14__SDMA_DEBUG_EVT_CHN_LINES_1 0x098 0x3c4 0x000 0x5 0x0
+#define MX53_PAD_DISP0_DAT14__EMI_EMI_DEBUG_19 0x098 0x3c4 0x000 0x6 0x0
+#define MX53_PAD_DISP0_DAT14__USBPHY2_VSTATUS_5 0x098 0x3c4 0x000 0x7 0x0
+#define MX53_PAD_DISP0_DAT15__IPU_DISP0_DAT_15 0x09c 0x3c8 0x000 0x0 0x0
+#define MX53_PAD_DISP0_DAT15__GPIO5_9 0x09c 0x3c8 0x000 0x1 0x0
+#define MX53_PAD_DISP0_DAT15__ECSPI1_SS1 0x09c 0x3c8 0x7ac 0x2 0x1
+#define MX53_PAD_DISP0_DAT15__ECSPI2_SS1 0x09c 0x3c8 0x7c8 0x3 0x0
+#define MX53_PAD_DISP0_DAT15__SDMA_DEBUG_EVT_CHN_LINES_2 0x09c 0x3c8 0x000 0x5 0x0
+#define MX53_PAD_DISP0_DAT15__EMI_EMI_DEBUG_20 0x09c 0x3c8 0x000 0x6 0x0
+#define MX53_PAD_DISP0_DAT15__USBPHY2_VSTATUS_6 0x09c 0x3c8 0x000 0x7 0x0
+#define MX53_PAD_DISP0_DAT16__IPU_DISP0_DAT_16 0x0a0 0x3cc 0x000 0x0 0x0
+#define MX53_PAD_DISP0_DAT16__GPIO5_10 0x0a0 0x3cc 0x000 0x1 0x0
+#define MX53_PAD_DISP0_DAT16__ECSPI2_MOSI 0x0a0 0x3cc 0x7c0 0x2 0x0
+#define MX53_PAD_DISP0_DAT16__AUDMUX_AUD5_TXC 0x0a0 0x3cc 0x758 0x3 0x1
+#define MX53_PAD_DISP0_DAT16__SDMA_EXT_EVENT_0 0x0a0 0x3cc 0x868 0x4 0x0
+#define MX53_PAD_DISP0_DAT16__SDMA_DEBUG_EVT_CHN_LINES_3 0x0a0 0x3cc 0x000 0x5 0x0
+#define MX53_PAD_DISP0_DAT16__EMI_EMI_DEBUG_21 0x0a0 0x3cc 0x000 0x6 0x0
+#define MX53_PAD_DISP0_DAT16__USBPHY2_VSTATUS_7 0x0a0 0x3cc 0x000 0x7 0x0
+#define MX53_PAD_DISP0_DAT17__IPU_DISP0_DAT_17 0x0a4 0x3d0 0x000 0x0 0x0
+#define MX53_PAD_DISP0_DAT17__GPIO5_11 0x0a4 0x3d0 0x000 0x1 0x0
+#define MX53_PAD_DISP0_DAT17__ECSPI2_MISO 0x0a4 0x3d0 0x7bc 0x2 0x0
+#define MX53_PAD_DISP0_DAT17__AUDMUX_AUD5_TXD 0x0a4 0x3d0 0x74c 0x3 0x1
+#define MX53_PAD_DISP0_DAT17__SDMA_EXT_EVENT_1 0x0a4 0x3d0 0x86c 0x4 0x0
+#define MX53_PAD_DISP0_DAT17__SDMA_DEBUG_EVT_CHN_LINES_4 0x0a4 0x3d0 0x000 0x5 0x0
+#define MX53_PAD_DISP0_DAT17__EMI_EMI_DEBUG_22 0x0a4 0x3d0 0x000 0x6 0x0
+#define MX53_PAD_DISP0_DAT18__IPU_DISP0_DAT_18 0x0a8 0x3d4 0x000 0x0 0x0
+#define MX53_PAD_DISP0_DAT18__GPIO5_12 0x0a8 0x3d4 0x000 0x1 0x0
+#define MX53_PAD_DISP0_DAT18__ECSPI2_SS0 0x0a8 0x3d4 0x7c4 0x2 0x0
+#define MX53_PAD_DISP0_DAT18__AUDMUX_AUD5_TXFS 0x0a8 0x3d4 0x75c 0x3 0x1
+#define MX53_PAD_DISP0_DAT18__AUDMUX_AUD4_RXFS 0x0a8 0x3d4 0x73c 0x4 0x0
+#define MX53_PAD_DISP0_DAT18__SDMA_DEBUG_EVT_CHN_LINES_5 0x0a8 0x3d4 0x000 0x5 0x0
+#define MX53_PAD_DISP0_DAT18__EMI_EMI_DEBUG_23 0x0a8 0x3d4 0x000 0x6 0x0
+#define MX53_PAD_DISP0_DAT18__EMI_WEIM_CS_2 0x0a8 0x3d4 0x000 0x7 0x0
+#define MX53_PAD_DISP0_DAT19__IPU_DISP0_DAT_19 0x0ac 0x3d8 0x000 0x0 0x0
+#define MX53_PAD_DISP0_DAT19__GPIO5_13 0x0ac 0x3d8 0x000 0x1 0x0
+#define MX53_PAD_DISP0_DAT19__ECSPI2_SCLK 0x0ac 0x3d8 0x7b8 0x2 0x0
+#define MX53_PAD_DISP0_DAT19__AUDMUX_AUD5_RXD 0x0ac 0x3d8 0x748 0x3 0x1
+#define MX53_PAD_DISP0_DAT19__AUDMUX_AUD4_RXC 0x0ac 0x3d8 0x738 0x4 0x0
+#define MX53_PAD_DISP0_DAT19__SDMA_DEBUG_EVT_CHN_LINES_6 0x0ac 0x3d8 0x000 0x5 0x0
+#define MX53_PAD_DISP0_DAT19__EMI_EMI_DEBUG_24 0x0ac 0x3d8 0x000 0x6 0x0
+#define MX53_PAD_DISP0_DAT19__EMI_WEIM_CS_3 0x0ac 0x3d8 0x000 0x7 0x0
+#define MX53_PAD_DISP0_DAT20__IPU_DISP0_DAT_20 0x0b0 0x3dc 0x000 0x0 0x0
+#define MX53_PAD_DISP0_DAT20__GPIO5_14 0x0b0 0x3dc 0x000 0x1 0x0
+#define MX53_PAD_DISP0_DAT20__ECSPI1_SCLK 0x0b0 0x3dc 0x79c 0x2 0x1
+#define MX53_PAD_DISP0_DAT20__AUDMUX_AUD4_TXC 0x0b0 0x3dc 0x740 0x3 0x0
+#define MX53_PAD_DISP0_DAT20__SDMA_DEBUG_EVT_CHN_LINES_7 0x0b0 0x3dc 0x000 0x5 0x0
+#define MX53_PAD_DISP0_DAT20__EMI_EMI_DEBUG_25 0x0b0 0x3dc 0x000 0x6 0x0
+#define MX53_PAD_DISP0_DAT20__SATA_PHY_TDI 0x0b0 0x3dc 0x000 0x7 0x0
+#define MX53_PAD_DISP0_DAT21__IPU_DISP0_DAT_21 0x0b4 0x3e0 0x000 0x0 0x0
+#define MX53_PAD_DISP0_DAT21__GPIO5_15 0x0b4 0x3e0 0x000 0x1 0x0
+#define MX53_PAD_DISP0_DAT21__ECSPI1_MOSI 0x0b4 0x3e0 0x7a4 0x2 0x1
+#define MX53_PAD_DISP0_DAT21__AUDMUX_AUD4_TXD 0x0b4 0x3e0 0x734 0x3 0x0
+#define MX53_PAD_DISP0_DAT21__SDMA_DEBUG_BUS_DEVICE_0 0x0b4 0x3e0 0x000 0x5 0x0
+#define MX53_PAD_DISP0_DAT21__EMI_EMI_DEBUG_26 0x0b4 0x3e0 0x000 0x6 0x0
+#define MX53_PAD_DISP0_DAT21__SATA_PHY_TDO 0x0b4 0x3e0 0x000 0x7 0x0
+#define MX53_PAD_DISP0_DAT22__IPU_DISP0_DAT_22 0x0b8 0x3e4 0x000 0x0 0x0
+#define MX53_PAD_DISP0_DAT22__GPIO5_16 0x0b8 0x3e4 0x000 0x1 0x0
+#define MX53_PAD_DISP0_DAT22__ECSPI1_MISO 0x0b8 0x3e4 0x7a0 0x2 0x1
+#define MX53_PAD_DISP0_DAT22__AUDMUX_AUD4_TXFS 0x0b8 0x3e4 0x744 0x3 0x0
+#define MX53_PAD_DISP0_DAT22__SDMA_DEBUG_BUS_DEVICE_1 0x0b8 0x3e4 0x000 0x5 0x0
+#define MX53_PAD_DISP0_DAT22__EMI_EMI_DEBUG_27 0x0b8 0x3e4 0x000 0x6 0x0
+#define MX53_PAD_DISP0_DAT22__SATA_PHY_TCK 0x0b8 0x3e4 0x000 0x7 0x0
+#define MX53_PAD_DISP0_DAT23__IPU_DISP0_DAT_23 0x0bc 0x3e8 0x000 0x0 0x0
+#define MX53_PAD_DISP0_DAT23__GPIO5_17 0x0bc 0x3e8 0x000 0x1 0x0
+#define MX53_PAD_DISP0_DAT23__ECSPI1_SS0 0x0bc 0x3e8 0x7a8 0x2 0x1
+#define MX53_PAD_DISP0_DAT23__AUDMUX_AUD4_RXD 0x0bc 0x3e8 0x730 0x3 0x0
+#define MX53_PAD_DISP0_DAT23__SDMA_DEBUG_BUS_DEVICE_2 0x0bc 0x3e8 0x000 0x5 0x0
+#define MX53_PAD_DISP0_DAT23__EMI_EMI_DEBUG_28 0x0bc 0x3e8 0x000 0x6 0x0
+#define MX53_PAD_DISP0_DAT23__SATA_PHY_TMS 0x0bc 0x3e8 0x000 0x7 0x0
+#define MX53_PAD_CSI0_PIXCLK__IPU_CSI0_PIXCLK 0x0c0 0x3ec 0x000 0x0 0x0
+#define MX53_PAD_CSI0_PIXCLK__GPIO5_18 0x0c0 0x3ec 0x000 0x1 0x0
+#define MX53_PAD_CSI0_PIXCLK__SDMA_DEBUG_PC_0 0x0c0 0x3ec 0x000 0x5 0x0
+#define MX53_PAD_CSI0_PIXCLK__EMI_EMI_DEBUG_29 0x0c0 0x3ec 0x000 0x6 0x0
+#define MX53_PAD_CSI0_MCLK__IPU_CSI0_HSYNC 0x0c4 0x3f0 0x000 0x0 0x0
+#define MX53_PAD_CSI0_MCLK__GPIO5_19 0x0c4 0x3f0 0x000 0x1 0x0
+#define MX53_PAD_CSI0_MCLK__CCM_CSI0_MCLK 0x0c4 0x3f0 0x000 0x2 0x0
+#define MX53_PAD_CSI0_MCLK__SDMA_DEBUG_PC_1 0x0c4 0x3f0 0x000 0x5 0x0
+#define MX53_PAD_CSI0_MCLK__EMI_EMI_DEBUG_30 0x0c4 0x3f0 0x000 0x6 0x0
+#define MX53_PAD_CSI0_MCLK__TPIU_TRCTL 0x0c4 0x3f0 0x000 0x7 0x0
+#define MX53_PAD_CSI0_DATA_EN__IPU_CSI0_DATA_EN 0x0c8 0x3f4 0x000 0x0 0x0
+#define MX53_PAD_CSI0_DATA_EN__GPIO5_20 0x0c8 0x3f4 0x000 0x1 0x0
+#define MX53_PAD_CSI0_DATA_EN__SDMA_DEBUG_PC_2 0x0c8 0x3f4 0x000 0x5 0x0
+#define MX53_PAD_CSI0_DATA_EN__EMI_EMI_DEBUG_31 0x0c8 0x3f4 0x000 0x6 0x0
+#define MX53_PAD_CSI0_DATA_EN__TPIU_TRCLK 0x0c8 0x3f4 0x000 0x7 0x0
+#define MX53_PAD_CSI0_VSYNC__IPU_CSI0_VSYNC 0x0cc 0x3f8 0x000 0x0 0x0
+#define MX53_PAD_CSI0_VSYNC__GPIO5_21 0x0cc 0x3f8 0x000 0x1 0x0
+#define MX53_PAD_CSI0_VSYNC__SDMA_DEBUG_PC_3 0x0cc 0x3f8 0x000 0x5 0x0
+#define MX53_PAD_CSI0_VSYNC__EMI_EMI_DEBUG_32 0x0cc 0x3f8 0x000 0x6 0x0
+#define MX53_PAD_CSI0_VSYNC__TPIU_TRACE_0 0x0cc 0x3f8 0x000 0x7 0x0
+#define MX53_PAD_CSI0_DAT4__IPU_CSI0_D_4 0x0d0 0x3fc 0x000 0x0 0x0
+#define MX53_PAD_CSI0_DAT4__GPIO5_22 0x0d0 0x3fc 0x000 0x1 0x0
+#define MX53_PAD_CSI0_DAT4__KPP_COL_5 0x0d0 0x3fc 0x840 0x2 0x1
+#define MX53_PAD_CSI0_DAT4__ECSPI1_SCLK 0x0d0 0x3fc 0x79c 0x3 0x2
+#define MX53_PAD_CSI0_DAT4__USBOH3_USBH3_STP 0x0d0 0x3fc 0x000 0x4 0x0
+#define MX53_PAD_CSI0_DAT4__AUDMUX_AUD3_TXC 0x0d0 0x3fc 0x000 0x5 0x0
+#define MX53_PAD_CSI0_DAT4__EMI_EMI_DEBUG_33 0x0d0 0x3fc 0x000 0x6 0x0
+#define MX53_PAD_CSI0_DAT4__TPIU_TRACE_1 0x0d0 0x3fc 0x000 0x7 0x0
+#define MX53_PAD_CSI0_DAT5__IPU_CSI0_D_5 0x0d4 0x400 0x000 0x0 0x0
+#define MX53_PAD_CSI0_DAT5__GPIO5_23 0x0d4 0x400 0x000 0x1 0x0
+#define MX53_PAD_CSI0_DAT5__KPP_ROW_5 0x0d4 0x400 0x84c 0x2 0x0
+#define MX53_PAD_CSI0_DAT5__ECSPI1_MOSI 0x0d4 0x400 0x7a4 0x3 0x2
+#define MX53_PAD_CSI0_DAT5__USBOH3_USBH3_NXT 0x0d4 0x400 0x000 0x4 0x0
+#define MX53_PAD_CSI0_DAT5__AUDMUX_AUD3_TXD 0x0d4 0x400 0x000 0x5 0x0
+#define MX53_PAD_CSI0_DAT5__EMI_EMI_DEBUG_34 0x0d4 0x400 0x000 0x6 0x0
+#define MX53_PAD_CSI0_DAT5__TPIU_TRACE_2 0x0d4 0x400 0x000 0x7 0x0
+#define MX53_PAD_CSI0_DAT6__IPU_CSI0_D_6 0x0d8 0x404 0x000 0x0 0x0
+#define MX53_PAD_CSI0_DAT6__GPIO5_24 0x0d8 0x404 0x000 0x1 0x0
+#define MX53_PAD_CSI0_DAT6__KPP_COL_6 0x0d8 0x404 0x844 0x2 0x0
+#define MX53_PAD_CSI0_DAT6__ECSPI1_MISO 0x0d8 0x404 0x7a0 0x3 0x2
+#define MX53_PAD_CSI0_DAT6__USBOH3_USBH3_CLK 0x0d8 0x404 0x000 0x4 0x0
+#define MX53_PAD_CSI0_DAT6__AUDMUX_AUD3_TXFS 0x0d8 0x404 0x000 0x5 0x0
+#define MX53_PAD_CSI0_DAT6__EMI_EMI_DEBUG_35 0x0d8 0x404 0x000 0x6 0x0
+#define MX53_PAD_CSI0_DAT6__TPIU_TRACE_3 0x0d8 0x404 0x000 0x7 0x0
+#define MX53_PAD_CSI0_DAT7__IPU_CSI0_D_7 0x0dc 0x408 0x000 0x0 0x0
+#define MX53_PAD_CSI0_DAT7__GPIO5_25 0x0dc 0x408 0x000 0x1 0x0
+#define MX53_PAD_CSI0_DAT7__KPP_ROW_6 0x0dc 0x408 0x850 0x2 0x0
+#define MX53_PAD_CSI0_DAT7__ECSPI1_SS0 0x0dc 0x408 0x7a8 0x3 0x2
+#define MX53_PAD_CSI0_DAT7__USBOH3_USBH3_DIR 0x0dc 0x408 0x000 0x4 0x0
+#define MX53_PAD_CSI0_DAT7__AUDMUX_AUD3_RXD 0x0dc 0x408 0x000 0x5 0x0
+#define MX53_PAD_CSI0_DAT7__EMI_EMI_DEBUG_36 0x0dc 0x408 0x000 0x6 0x0
+#define MX53_PAD_CSI0_DAT7__TPIU_TRACE_4 0x0dc 0x408 0x000 0x7 0x0
+#define MX53_PAD_CSI0_DAT8__IPU_CSI0_D_8 0x0e0 0x40c 0x000 0x0 0x0
+#define MX53_PAD_CSI0_DAT8__GPIO5_26 0x0e0 0x40c 0x000 0x1 0x0
+#define MX53_PAD_CSI0_DAT8__KPP_COL_7 0x0e0 0x40c 0x848 0x2 0x0
+#define MX53_PAD_CSI0_DAT8__ECSPI2_SCLK 0x0e0 0x40c 0x7b8 0x3 0x1
+#define MX53_PAD_CSI0_DAT8__USBOH3_USBH3_OC 0x0e0 0x40c 0x000 0x4 0x0
+#define MX53_PAD_CSI0_DAT8__I2C1_SDA 0x0e0 0x40c 0x818 0x5 0x0
+#define MX53_PAD_CSI0_DAT8__EMI_EMI_DEBUG_37 0x0e0 0x40c 0x000 0x6 0x0
+#define MX53_PAD_CSI0_DAT8__TPIU_TRACE_5 0x0e0 0x40c 0x000 0x7 0x0
+#define MX53_PAD_CSI0_DAT9__IPU_CSI0_D_9 0x0e4 0x410 0x000 0x0 0x0
+#define MX53_PAD_CSI0_DAT9__GPIO5_27 0x0e4 0x410 0x000 0x1 0x0
+#define MX53_PAD_CSI0_DAT9__KPP_ROW_7 0x0e4 0x410 0x854 0x2 0x0
+#define MX53_PAD_CSI0_DAT9__ECSPI2_MOSI 0x0e4 0x410 0x7c0 0x3 0x1
+#define MX53_PAD_CSI0_DAT9__USBOH3_USBH3_PWR 0x0e4 0x410 0x000 0x4 0x0
+#define MX53_PAD_CSI0_DAT9__I2C1_SCL 0x0e4 0x410 0x814 0x5 0x0
+#define MX53_PAD_CSI0_DAT9__EMI_EMI_DEBUG_38 0x0e4 0x410 0x000 0x6 0x0
+#define MX53_PAD_CSI0_DAT9__TPIU_TRACE_6 0x0e4 0x410 0x000 0x7 0x0
+#define MX53_PAD_CSI0_DAT10__IPU_CSI0_D_10 0x0e8 0x414 0x000 0x0 0x0
+#define MX53_PAD_CSI0_DAT10__GPIO5_28 0x0e8 0x414 0x000 0x1 0x0
+#define MX53_PAD_CSI0_DAT10__UART1_TXD_MUX 0x0e8 0x414 0x000 0x2 0x0
+#define MX53_PAD_CSI0_DAT10__ECSPI2_MISO 0x0e8 0x414 0x7bc 0x3 0x1
+#define MX53_PAD_CSI0_DAT10__AUDMUX_AUD3_RXC 0x0e8 0x414 0x000 0x4 0x0
+#define MX53_PAD_CSI0_DAT10__SDMA_DEBUG_PC_4 0x0e8 0x414 0x000 0x5 0x0
+#define MX53_PAD_CSI0_DAT10__EMI_EMI_DEBUG_39 0x0e8 0x414 0x000 0x6 0x0
+#define MX53_PAD_CSI0_DAT10__TPIU_TRACE_7 0x0e8 0x414 0x000 0x7 0x0
+#define MX53_PAD_CSI0_DAT11__IPU_CSI0_D_11 0x0ec 0x418 0x000 0x0 0x0
+#define MX53_PAD_CSI0_DAT11__GPIO5_29 0x0ec 0x418 0x000 0x1 0x0
+#define MX53_PAD_CSI0_DAT11__UART1_RXD_MUX 0x0ec 0x418 0x878 0x2 0x1
+#define MX53_PAD_CSI0_DAT11__ECSPI2_SS0 0x0ec 0x418 0x7c4 0x3 0x1
+#define MX53_PAD_CSI0_DAT11__AUDMUX_AUD3_RXFS 0x0ec 0x418 0x000 0x4 0x0
+#define MX53_PAD_CSI0_DAT11__SDMA_DEBUG_PC_5 0x0ec 0x418 0x000 0x5 0x0
+#define MX53_PAD_CSI0_DAT11__EMI_EMI_DEBUG_40 0x0ec 0x418 0x000 0x6 0x0
+#define MX53_PAD_CSI0_DAT11__TPIU_TRACE_8 0x0ec 0x418 0x000 0x7 0x0
+#define MX53_PAD_CSI0_DAT12__IPU_CSI0_D_12 0x0f0 0x41c 0x000 0x0 0x0
+#define MX53_PAD_CSI0_DAT12__GPIO5_30 0x0f0 0x41c 0x000 0x1 0x0
+#define MX53_PAD_CSI0_DAT12__UART4_TXD_MUX 0x0f0 0x41c 0x000 0x2 0x0
+#define MX53_PAD_CSI0_DAT12__USBOH3_USBH3_DATA_0 0x0f0 0x41c 0x000 0x4 0x0
+#define MX53_PAD_CSI0_DAT12__SDMA_DEBUG_PC_6 0x0f0 0x41c 0x000 0x5 0x0
+#define MX53_PAD_CSI0_DAT12__EMI_EMI_DEBUG_41 0x0f0 0x41c 0x000 0x6 0x0
+#define MX53_PAD_CSI0_DAT12__TPIU_TRACE_9 0x0f0 0x41c 0x000 0x7 0x0
+#define MX53_PAD_CSI0_DAT13__IPU_CSI0_D_13 0x0f4 0x420 0x000 0x0 0x0
+#define MX53_PAD_CSI0_DAT13__GPIO5_31 0x0f4 0x420 0x000 0x1 0x0
+#define MX53_PAD_CSI0_DAT13__UART4_RXD_MUX 0x0f4 0x420 0x890 0x2 0x3
+#define MX53_PAD_CSI0_DAT13__USBOH3_USBH3_DATA_1 0x0f4 0x420 0x000 0x4 0x0
+#define MX53_PAD_CSI0_DAT13__SDMA_DEBUG_PC_7 0x0f4 0x420 0x000 0x5 0x0
+#define MX53_PAD_CSI0_DAT13__EMI_EMI_DEBUG_42 0x0f4 0x420 0x000 0x6 0x0
+#define MX53_PAD_CSI0_DAT13__TPIU_TRACE_10 0x0f4 0x420 0x000 0x7 0x0
+#define MX53_PAD_CSI0_DAT14__IPU_CSI0_D_14 0x0f8 0x424 0x000 0x0 0x0
+#define MX53_PAD_CSI0_DAT14__GPIO6_0 0x0f8 0x424 0x000 0x1 0x0
+#define MX53_PAD_CSI0_DAT14__UART5_TXD_MUX 0x0f8 0x424 0x000 0x2 0x0
+#define MX53_PAD_CSI0_DAT14__USBOH3_USBH3_DATA_2 0x0f8 0x424 0x000 0x4 0x0
+#define MX53_PAD_CSI0_DAT14__SDMA_DEBUG_PC_8 0x0f8 0x424 0x000 0x5 0x0
+#define MX53_PAD_CSI0_DAT14__EMI_EMI_DEBUG_43 0x0f8 0x424 0x000 0x6 0x0
+#define MX53_PAD_CSI0_DAT14__TPIU_TRACE_11 0x0f8 0x424 0x000 0x7 0x0
+#define MX53_PAD_CSI0_DAT15__IPU_CSI0_D_15 0x0fc 0x428 0x000 0x0 0x0
+#define MX53_PAD_CSI0_DAT15__GPIO6_1 0x0fc 0x428 0x000 0x1 0x0
+#define MX53_PAD_CSI0_DAT15__UART5_RXD_MUX 0x0fc 0x428 0x898 0x2 0x3
+#define MX53_PAD_CSI0_DAT15__USBOH3_USBH3_DATA_3 0x0fc 0x428 0x000 0x4 0x0
+#define MX53_PAD_CSI0_DAT15__SDMA_DEBUG_PC_9 0x0fc 0x428 0x000 0x5 0x0
+#define MX53_PAD_CSI0_DAT15__EMI_EMI_DEBUG_44 0x0fc 0x428 0x000 0x6 0x0
+#define MX53_PAD_CSI0_DAT15__TPIU_TRACE_12 0x0fc 0x428 0x000 0x7 0x0
+#define MX53_PAD_CSI0_DAT16__IPU_CSI0_D_16 0x100 0x42c 0x000 0x0 0x0
+#define MX53_PAD_CSI0_DAT16__GPIO6_2 0x100 0x42c 0x000 0x1 0x0
+#define MX53_PAD_CSI0_DAT16__UART4_RTS 0x100 0x42c 0x88c 0x2 0x0
+#define MX53_PAD_CSI0_DAT16__USBOH3_USBH3_DATA_4 0x100 0x42c 0x000 0x4 0x0
+#define MX53_PAD_CSI0_DAT16__SDMA_DEBUG_PC_10 0x100 0x42c 0x000 0x5 0x0
+#define MX53_PAD_CSI0_DAT16__EMI_EMI_DEBUG_45 0x100 0x42c 0x000 0x6 0x0
+#define MX53_PAD_CSI0_DAT16__TPIU_TRACE_13 0x100 0x42c 0x000 0x7 0x0
+#define MX53_PAD_CSI0_DAT17__IPU_CSI0_D_17 0x104 0x430 0x000 0x0 0x0
+#define MX53_PAD_CSI0_DAT17__GPIO6_3 0x104 0x430 0x000 0x1 0x0
+#define MX53_PAD_CSI0_DAT17__UART4_CTS 0x104 0x430 0x000 0x2 0x0
+#define MX53_PAD_CSI0_DAT17__USBOH3_USBH3_DATA_5 0x104 0x430 0x000 0x4 0x0
+#define MX53_PAD_CSI0_DAT17__SDMA_DEBUG_PC_11 0x104 0x430 0x000 0x5 0x0
+#define MX53_PAD_CSI0_DAT17__EMI_EMI_DEBUG_46 0x104 0x430 0x000 0x6 0x0
+#define MX53_PAD_CSI0_DAT17__TPIU_TRACE_14 0x104 0x430 0x000 0x7 0x0
+#define MX53_PAD_CSI0_DAT18__IPU_CSI0_D_18 0x108 0x434 0x000 0x0 0x0
+#define MX53_PAD_CSI0_DAT18__GPIO6_4 0x108 0x434 0x000 0x1 0x0
+#define MX53_PAD_CSI0_DAT18__UART5_RTS 0x108 0x434 0x894 0x2 0x2
+#define MX53_PAD_CSI0_DAT18__USBOH3_USBH3_DATA_6 0x108 0x434 0x000 0x4 0x0
+#define MX53_PAD_CSI0_DAT18__SDMA_DEBUG_PC_12 0x108 0x434 0x000 0x5 0x0
+#define MX53_PAD_CSI0_DAT18__EMI_EMI_DEBUG_47 0x108 0x434 0x000 0x6 0x0
+#define MX53_PAD_CSI0_DAT18__TPIU_TRACE_15 0x108 0x434 0x000 0x7 0x0
+#define MX53_PAD_CSI0_DAT19__IPU_CSI0_D_19 0x10c 0x438 0x000 0x0 0x0
+#define MX53_PAD_CSI0_DAT19__GPIO6_5 0x10c 0x438 0x000 0x1 0x0
+#define MX53_PAD_CSI0_DAT19__UART5_CTS 0x10c 0x438 0x000 0x2 0x0
+#define MX53_PAD_CSI0_DAT19__USBOH3_USBH3_DATA_7 0x10c 0x438 0x000 0x4 0x0
+#define MX53_PAD_CSI0_DAT19__SDMA_DEBUG_PC_13 0x10c 0x438 0x000 0x5 0x0
+#define MX53_PAD_CSI0_DAT19__EMI_EMI_DEBUG_48 0x10c 0x438 0x000 0x6 0x0
+#define MX53_PAD_CSI0_DAT19__USBPHY2_BISTOK 0x10c 0x438 0x000 0x7 0x0
+#define MX53_PAD_EIM_A25__EMI_WEIM_A_25 0x110 0x458 0x000 0x0 0x0
+#define MX53_PAD_EIM_A25__GPIO5_2 0x110 0x458 0x000 0x1 0x0
+#define MX53_PAD_EIM_A25__ECSPI2_RDY 0x110 0x458 0x000 0x2 0x0
+#define MX53_PAD_EIM_A25__IPU_DI1_PIN12 0x110 0x458 0x000 0x3 0x0
+#define MX53_PAD_EIM_A25__CSPI_SS1 0x110 0x458 0x790 0x4 0x1
+#define MX53_PAD_EIM_A25__IPU_DI0_D1_CS 0x110 0x458 0x000 0x6 0x0
+#define MX53_PAD_EIM_A25__USBPHY1_BISTOK 0x110 0x458 0x000 0x7 0x0
+#define MX53_PAD_EIM_EB2__EMI_WEIM_EB_2 0x114 0x45c 0x000 0x0 0x0
+#define MX53_PAD_EIM_EB2__GPIO2_30 0x114 0x45c 0x000 0x1 0x0
+#define MX53_PAD_EIM_EB2__CCM_DI1_EXT_CLK 0x114 0x45c 0x76c 0x2 0x0
+#define MX53_PAD_EIM_EB2__IPU_SER_DISP1_CS 0x114 0x45c 0x000 0x3 0x0
+#define MX53_PAD_EIM_EB2__ECSPI1_SS0 0x114 0x45c 0x7a8 0x4 0x3
+#define MX53_PAD_EIM_EB2__I2C2_SCL 0x114 0x45c 0x81c 0x5 0x1
+#define MX53_PAD_EIM_D16__EMI_WEIM_D_16 0x118 0x460 0x000 0x0 0x0
+#define MX53_PAD_EIM_D16__GPIO3_16 0x118 0x460 0x000 0x1 0x0
+#define MX53_PAD_EIM_D16__IPU_DI0_PIN5 0x118 0x460 0x000 0x2 0x0
+#define MX53_PAD_EIM_D16__IPU_DISPB1_SER_CLK 0x118 0x460 0x000 0x3 0x0
+#define MX53_PAD_EIM_D16__ECSPI1_SCLK 0x118 0x460 0x79c 0x4 0x3
+#define MX53_PAD_EIM_D16__I2C2_SDA 0x118 0x460 0x820 0x5 0x1
+#define MX53_PAD_EIM_D17__EMI_WEIM_D_17 0x11c 0x464 0x000 0x0 0x0
+#define MX53_PAD_EIM_D17__GPIO3_17 0x11c 0x464 0x000 0x1 0x0
+#define MX53_PAD_EIM_D17__IPU_DI0_PIN6 0x11c 0x464 0x000 0x2 0x0
+#define MX53_PAD_EIM_D17__IPU_DISPB1_SER_DIN 0x11c 0x464 0x830 0x3 0x0
+#define MX53_PAD_EIM_D17__ECSPI1_MISO 0x11c 0x464 0x7a0 0x4 0x3
+#define MX53_PAD_EIM_D17__I2C3_SCL 0x11c 0x464 0x824 0x5 0x0
+#define MX53_PAD_EIM_D18__EMI_WEIM_D_18 0x120 0x468 0x000 0x0 0x0
+#define MX53_PAD_EIM_D18__GPIO3_18 0x120 0x468 0x000 0x1 0x0
+#define MX53_PAD_EIM_D18__IPU_DI0_PIN7 0x120 0x468 0x000 0x2 0x0
+#define MX53_PAD_EIM_D18__IPU_DISPB1_SER_DIO 0x120 0x468 0x830 0x3 0x1
+#define MX53_PAD_EIM_D18__ECSPI1_MOSI 0x120 0x468 0x7a4 0x4 0x3
+#define MX53_PAD_EIM_D18__I2C3_SDA 0x120 0x468 0x828 0x5 0x0
+#define MX53_PAD_EIM_D18__IPU_DI1_D0_CS 0x120 0x468 0x000 0x6 0x0
+#define MX53_PAD_EIM_D19__EMI_WEIM_D_19 0x124 0x46c 0x000 0x0 0x0
+#define MX53_PAD_EIM_D19__GPIO3_19 0x124 0x46c 0x000 0x1 0x0
+#define MX53_PAD_EIM_D19__IPU_DI0_PIN8 0x124 0x46c 0x000 0x2 0x0
+#define MX53_PAD_EIM_D19__IPU_DISPB1_SER_RS 0x124 0x46c 0x000 0x3 0x0
+#define MX53_PAD_EIM_D19__ECSPI1_SS1 0x124 0x46c 0x7ac 0x4 0x2
+#define MX53_PAD_EIM_D19__EPIT1_EPITO 0x124 0x46c 0x000 0x5 0x0
+#define MX53_PAD_EIM_D19__UART1_CTS 0x124 0x46c 0x000 0x6 0x0
+#define MX53_PAD_EIM_D19__USBOH3_USBH2_OC 0x124 0x46c 0x8a4 0x7 0x0
+#define MX53_PAD_EIM_D20__EMI_WEIM_D_20 0x128 0x470 0x000 0x0 0x0
+#define MX53_PAD_EIM_D20__GPIO3_20 0x128 0x470 0x000 0x1 0x0
+#define MX53_PAD_EIM_D20__IPU_DI0_PIN16 0x128 0x470 0x000 0x2 0x0
+#define MX53_PAD_EIM_D20__IPU_SER_DISP0_CS 0x128 0x470 0x000 0x3 0x0
+#define MX53_PAD_EIM_D20__CSPI_SS0 0x128 0x470 0x78c 0x4 0x1
+#define MX53_PAD_EIM_D20__EPIT2_EPITO 0x128 0x470 0x000 0x5 0x0
+#define MX53_PAD_EIM_D20__UART1_RTS 0x128 0x470 0x874 0x6 0x1
+#define MX53_PAD_EIM_D20__USBOH3_USBH2_PWR 0x128 0x470 0x000 0x7 0x0
+#define MX53_PAD_EIM_D21__EMI_WEIM_D_21 0x12c 0x474 0x000 0x0 0x0
+#define MX53_PAD_EIM_D21__GPIO3_21 0x12c 0x474 0x000 0x1 0x0
+#define MX53_PAD_EIM_D21__IPU_DI0_PIN17 0x12c 0x474 0x000 0x2 0x0
+#define MX53_PAD_EIM_D21__IPU_DISPB0_SER_CLK 0x12c 0x474 0x000 0x3 0x0
+#define MX53_PAD_EIM_D21__CSPI_SCLK 0x12c 0x474 0x780 0x4 0x1
+#define MX53_PAD_EIM_D21__I2C1_SCL 0x12c 0x474 0x814 0x5 0x1
+#define MX53_PAD_EIM_D21__USBOH3_USBOTG_OC 0x12c 0x474 0x89c 0x6 0x1
+#define MX53_PAD_EIM_D22__EMI_WEIM_D_22 0x130 0x478 0x000 0x0 0x0
+#define MX53_PAD_EIM_D22__GPIO3_22 0x130 0x478 0x000 0x1 0x0
+#define MX53_PAD_EIM_D22__IPU_DI0_PIN1 0x130 0x478 0x000 0x2 0x0
+#define MX53_PAD_EIM_D22__IPU_DISPB0_SER_DIN 0x130 0x478 0x82c 0x3 0x0
+#define MX53_PAD_EIM_D22__CSPI_MISO 0x130 0x478 0x784 0x4 0x1
+#define MX53_PAD_EIM_D22__USBOH3_USBOTG_PWR 0x130 0x478 0x000 0x6 0x0
+#define MX53_PAD_EIM_D23__EMI_WEIM_D_23 0x134 0x47c 0x000 0x0 0x0
+#define MX53_PAD_EIM_D23__GPIO3_23 0x134 0x47c 0x000 0x1 0x0
+#define MX53_PAD_EIM_D23__UART3_CTS 0x134 0x47c 0x000 0x2 0x0
+#define MX53_PAD_EIM_D23__UART1_DCD 0x134 0x47c 0x000 0x3 0x0
+#define MX53_PAD_EIM_D23__IPU_DI0_D0_CS 0x134 0x47c 0x000 0x4 0x0
+#define MX53_PAD_EIM_D23__IPU_DI1_PIN2 0x134 0x47c 0x000 0x5 0x0
+#define MX53_PAD_EIM_D23__IPU_CSI1_DATA_EN 0x134 0x47c 0x834 0x6 0x0
+#define MX53_PAD_EIM_D23__IPU_DI1_PIN14 0x134 0x47c 0x000 0x7 0x0
+#define MX53_PAD_EIM_EB3__EMI_WEIM_EB_3 0x138 0x480 0x000 0x0 0x0
+#define MX53_PAD_EIM_EB3__GPIO2_31 0x138 0x480 0x000 0x1 0x0
+#define MX53_PAD_EIM_EB3__UART3_RTS 0x138 0x480 0x884 0x2 0x1
+#define MX53_PAD_EIM_EB3__UART1_RI 0x138 0x480 0x000 0x3 0x0
+#define MX53_PAD_EIM_EB3__IPU_DI1_PIN3 0x138 0x480 0x000 0x5 0x0
+#define MX53_PAD_EIM_EB3__IPU_CSI1_HSYNC 0x138 0x480 0x838 0x6 0x0
+#define MX53_PAD_EIM_EB3__IPU_DI1_PIN16 0x138 0x480 0x000 0x7 0x0
+#define MX53_PAD_EIM_D24__EMI_WEIM_D_24 0x13c 0x484 0x000 0x0 0x0
+#define MX53_PAD_EIM_D24__GPIO3_24 0x13c 0x484 0x000 0x1 0x0
+#define MX53_PAD_EIM_D24__UART3_TXD_MUX 0x13c 0x484 0x000 0x2 0x0
+#define MX53_PAD_EIM_D24__ECSPI1_SS2 0x13c 0x484 0x7b0 0x3 0x1
+#define MX53_PAD_EIM_D24__CSPI_SS2 0x13c 0x484 0x794 0x4 0x1
+#define MX53_PAD_EIM_D24__AUDMUX_AUD5_RXFS 0x13c 0x484 0x754 0x5 0x1
+#define MX53_PAD_EIM_D24__ECSPI2_SS2 0x13c 0x484 0x000 0x6 0x0
+#define MX53_PAD_EIM_D24__UART1_DTR 0x13c 0x484 0x000 0x7 0x0
+#define MX53_PAD_EIM_D25__EMI_WEIM_D_25 0x140 0x488 0x000 0x0 0x0
+#define MX53_PAD_EIM_D25__GPIO3_25 0x140 0x488 0x000 0x1 0x0
+#define MX53_PAD_EIM_D25__UART3_RXD_MUX 0x140 0x488 0x888 0x2 0x1
+#define MX53_PAD_EIM_D25__ECSPI1_SS3 0x140 0x488 0x7b4 0x3 0x1
+#define MX53_PAD_EIM_D25__CSPI_SS3 0x140 0x488 0x798 0x4 0x1
+#define MX53_PAD_EIM_D25__AUDMUX_AUD5_RXC 0x140 0x488 0x750 0x5 0x1
+#define MX53_PAD_EIM_D25__ECSPI2_SS3 0x140 0x488 0x000 0x6 0x0
+#define MX53_PAD_EIM_D25__UART1_DSR 0x140 0x488 0x000 0x7 0x0
+#define MX53_PAD_EIM_D26__EMI_WEIM_D_26 0x144 0x48c 0x000 0x0 0x0
+#define MX53_PAD_EIM_D26__GPIO3_26 0x144 0x48c 0x000 0x1 0x0
+#define MX53_PAD_EIM_D26__UART2_TXD_MUX 0x144 0x48c 0x000 0x2 0x0
+#define MX53_PAD_EIM_D26__FIRI_RXD 0x144 0x48c 0x80c 0x3 0x0
+#define MX53_PAD_EIM_D26__IPU_CSI0_D_1 0x144 0x48c 0x000 0x4 0x0
+#define MX53_PAD_EIM_D26__IPU_DI1_PIN11 0x144 0x48c 0x000 0x5 0x0
+#define MX53_PAD_EIM_D26__IPU_SISG_2 0x144 0x48c 0x000 0x6 0x0
+#define MX53_PAD_EIM_D26__IPU_DISP1_DAT_22 0x144 0x48c 0x000 0x7 0x0
+#define MX53_PAD_EIM_D27__EMI_WEIM_D_27 0x148 0x490 0x000 0x0 0x0
+#define MX53_PAD_EIM_D27__GPIO3_27 0x148 0x490 0x000 0x1 0x0
+#define MX53_PAD_EIM_D27__UART2_RXD_MUX 0x148 0x490 0x880 0x2 0x1
+#define MX53_PAD_EIM_D27__FIRI_TXD 0x148 0x490 0x000 0x3 0x0
+#define MX53_PAD_EIM_D27__IPU_CSI0_D_0 0x148 0x490 0x000 0x4 0x0
+#define MX53_PAD_EIM_D27__IPU_DI1_PIN13 0x148 0x490 0x000 0x5 0x0
+#define MX53_PAD_EIM_D27__IPU_SISG_3 0x148 0x490 0x000 0x6 0x0
+#define MX53_PAD_EIM_D27__IPU_DISP1_DAT_23 0x148 0x490 0x000 0x7 0x0
+#define MX53_PAD_EIM_D28__EMI_WEIM_D_28 0x14c 0x494 0x000 0x0 0x0
+#define MX53_PAD_EIM_D28__GPIO3_28 0x14c 0x494 0x000 0x1 0x0
+#define MX53_PAD_EIM_D28__UART2_CTS 0x14c 0x494 0x000 0x2 0x0
+#define MX53_PAD_EIM_D28__IPU_DISPB0_SER_DIO 0x14c 0x494 0x82c 0x3 0x1
+#define MX53_PAD_EIM_D28__CSPI_MOSI 0x14c 0x494 0x788 0x4 0x1
+#define MX53_PAD_EIM_D28__I2C1_SDA 0x14c 0x494 0x818 0x5 0x1
+#define MX53_PAD_EIM_D28__IPU_EXT_TRIG 0x14c 0x494 0x000 0x6 0x0
+#define MX53_PAD_EIM_D28__IPU_DI0_PIN13 0x14c 0x494 0x000 0x7 0x0
+#define MX53_PAD_EIM_D29__EMI_WEIM_D_29 0x150 0x498 0x000 0x0 0x0
+#define MX53_PAD_EIM_D29__GPIO3_29 0x150 0x498 0x000 0x1 0x0
+#define MX53_PAD_EIM_D29__UART2_RTS 0x150 0x498 0x87c 0x2 0x1
+#define MX53_PAD_EIM_D29__IPU_DISPB0_SER_RS 0x150 0x498 0x000 0x3 0x0
+#define MX53_PAD_EIM_D29__CSPI_SS0 0x150 0x498 0x78c 0x4 0x2
+#define MX53_PAD_EIM_D29__IPU_DI1_PIN15 0x150 0x498 0x000 0x5 0x0
+#define MX53_PAD_EIM_D29__IPU_CSI1_VSYNC 0x150 0x498 0x83c 0x6 0x0
+#define MX53_PAD_EIM_D29__IPU_DI0_PIN14 0x150 0x498 0x000 0x7 0x0
+#define MX53_PAD_EIM_D30__EMI_WEIM_D_30 0x154 0x49c 0x000 0x0 0x0
+#define MX53_PAD_EIM_D30__GPIO3_30 0x154 0x49c 0x000 0x1 0x0
+#define MX53_PAD_EIM_D30__UART3_CTS 0x154 0x49c 0x000 0x2 0x0
+#define MX53_PAD_EIM_D30__IPU_CSI0_D_3 0x154 0x49c 0x000 0x3 0x0
+#define MX53_PAD_EIM_D30__IPU_DI0_PIN11 0x154 0x49c 0x000 0x4 0x0
+#define MX53_PAD_EIM_D30__IPU_DISP1_DAT_21 0x154 0x49c 0x000 0x5 0x0
+#define MX53_PAD_EIM_D30__USBOH3_USBH1_OC 0x154 0x49c 0x8a0 0x6 0x0
+#define MX53_PAD_EIM_D30__USBOH3_USBH2_OC 0x154 0x49c 0x8a4 0x7 0x1
+#define MX53_PAD_EIM_D31__EMI_WEIM_D_31 0x158 0x4a0 0x000 0x0 0x0
+#define MX53_PAD_EIM_D31__GPIO3_31 0x158 0x4a0 0x000 0x1 0x0
+#define MX53_PAD_EIM_D31__UART3_RTS 0x158 0x4a0 0x884 0x2 0x3
+#define MX53_PAD_EIM_D31__IPU_CSI0_D_2 0x158 0x4a0 0x000 0x3 0x0
+#define MX53_PAD_EIM_D31__IPU_DI0_PIN12 0x158 0x4a0 0x000 0x4 0x0
+#define MX53_PAD_EIM_D31__IPU_DISP1_DAT_20 0x158 0x4a0 0x000 0x5 0x0
+#define MX53_PAD_EIM_D31__USBOH3_USBH1_PWR 0x158 0x4a0 0x000 0x6 0x0
+#define MX53_PAD_EIM_D31__USBOH3_USBH2_PWR 0x158 0x4a0 0x000 0x7 0x0
+#define MX53_PAD_EIM_A24__EMI_WEIM_A_24 0x15c 0x4a8 0x000 0x0 0x0
+#define MX53_PAD_EIM_A24__GPIO5_4 0x15c 0x4a8 0x000 0x1 0x0
+#define MX53_PAD_EIM_A24__IPU_DISP1_DAT_19 0x15c 0x4a8 0x000 0x2 0x0
+#define MX53_PAD_EIM_A24__IPU_CSI1_D_19 0x15c 0x4a8 0x000 0x3 0x0
+#define MX53_PAD_EIM_A24__IPU_SISG_2 0x15c 0x4a8 0x000 0x6 0x0
+#define MX53_PAD_EIM_A24__USBPHY2_BVALID 0x15c 0x4a8 0x000 0x7 0x0
+#define MX53_PAD_EIM_A23__EMI_WEIM_A_23 0x160 0x4ac 0x000 0x0 0x0
+#define MX53_PAD_EIM_A23__GPIO6_6 0x160 0x4ac 0x000 0x1 0x0
+#define MX53_PAD_EIM_A23__IPU_DISP1_DAT_18 0x160 0x4ac 0x000 0x2 0x0
+#define MX53_PAD_EIM_A23__IPU_CSI1_D_18 0x160 0x4ac 0x000 0x3 0x0
+#define MX53_PAD_EIM_A23__IPU_SISG_3 0x160 0x4ac 0x000 0x6 0x0
+#define MX53_PAD_EIM_A23__USBPHY2_ENDSESSION 0x160 0x4ac 0x000 0x7 0x0
+#define MX53_PAD_EIM_A22__EMI_WEIM_A_22 0x164 0x4b0 0x000 0x0 0x0
+#define MX53_PAD_EIM_A22__GPIO2_16 0x164 0x4b0 0x000 0x1 0x0
+#define MX53_PAD_EIM_A22__IPU_DISP1_DAT_17 0x164 0x4b0 0x000 0x2 0x0
+#define MX53_PAD_EIM_A22__IPU_CSI1_D_17 0x164 0x4b0 0x000 0x3 0x0
+#define MX53_PAD_EIM_A22__SRC_BT_CFG1_7 0x164 0x4b0 0x000 0x7 0x0
+#define MX53_PAD_EIM_A21__EMI_WEIM_A_21 0x168 0x4b4 0x000 0x0 0x0
+#define MX53_PAD_EIM_A21__GPIO2_17 0x168 0x4b4 0x000 0x1 0x0
+#define MX53_PAD_EIM_A21__IPU_DISP1_DAT_16 0x168 0x4b4 0x000 0x2 0x0
+#define MX53_PAD_EIM_A21__IPU_CSI1_D_16 0x168 0x4b4 0x000 0x3 0x0
+#define MX53_PAD_EIM_A21__SRC_BT_CFG1_6 0x168 0x4b4 0x000 0x7 0x0
+#define MX53_PAD_EIM_A20__EMI_WEIM_A_20 0x16c 0x4b8 0x000 0x0 0x0
+#define MX53_PAD_EIM_A20__GPIO2_18 0x16c 0x4b8 0x000 0x1 0x0
+#define MX53_PAD_EIM_A20__IPU_DISP1_DAT_15 0x16c 0x4b8 0x000 0x2 0x0
+#define MX53_PAD_EIM_A20__IPU_CSI1_D_15 0x16c 0x4b8 0x000 0x3 0x0
+#define MX53_PAD_EIM_A20__SRC_BT_CFG1_5 0x16c 0x4b8 0x000 0x7 0x0
+#define MX53_PAD_EIM_A19__EMI_WEIM_A_19 0x170 0x4bc 0x000 0x0 0x0
+#define MX53_PAD_EIM_A19__GPIO2_19 0x170 0x4bc 0x000 0x1 0x0
+#define MX53_PAD_EIM_A19__IPU_DISP1_DAT_14 0x170 0x4bc 0x000 0x2 0x0
+#define MX53_PAD_EIM_A19__IPU_CSI1_D_14 0x170 0x4bc 0x000 0x3 0x0
+#define MX53_PAD_EIM_A19__SRC_BT_CFG1_4 0x170 0x4bc 0x000 0x7 0x0
+#define MX53_PAD_EIM_A18__EMI_WEIM_A_18 0x174 0x4c0 0x000 0x0 0x0
+#define MX53_PAD_EIM_A18__GPIO2_20 0x174 0x4c0 0x000 0x1 0x0
+#define MX53_PAD_EIM_A18__IPU_DISP1_DAT_13 0x174 0x4c0 0x000 0x2 0x0
+#define MX53_PAD_EIM_A18__IPU_CSI1_D_13 0x174 0x4c0 0x000 0x3 0x0
+#define MX53_PAD_EIM_A18__SRC_BT_CFG1_3 0x174 0x4c0 0x000 0x7 0x0
+#define MX53_PAD_EIM_A17__EMI_WEIM_A_17 0x178 0x4c4 0x000 0x0 0x0
+#define MX53_PAD_EIM_A17__GPIO2_21 0x178 0x4c4 0x000 0x1 0x0
+#define MX53_PAD_EIM_A17__IPU_DISP1_DAT_12 0x178 0x4c4 0x000 0x2 0x0
+#define MX53_PAD_EIM_A17__IPU_CSI1_D_12 0x178 0x4c4 0x000 0x3 0x0
+#define MX53_PAD_EIM_A17__SRC_BT_CFG1_2 0x178 0x4c4 0x000 0x7 0x0
+#define MX53_PAD_EIM_A16__EMI_WEIM_A_16 0x17c 0x4c8 0x000 0x0 0x0
+#define MX53_PAD_EIM_A16__GPIO2_22 0x17c 0x4c8 0x000 0x1 0x0
+#define MX53_PAD_EIM_A16__IPU_DI1_DISP_CLK 0x17c 0x4c8 0x000 0x2 0x0
+#define MX53_PAD_EIM_A16__IPU_CSI1_PIXCLK 0x17c 0x4c8 0x000 0x3 0x0
+#define MX53_PAD_EIM_A16__SRC_BT_CFG1_1 0x17c 0x4c8 0x000 0x7 0x0
+#define MX53_PAD_EIM_CS0__EMI_WEIM_CS_0 0x180 0x4cc 0x000 0x0 0x0
+#define MX53_PAD_EIM_CS0__GPIO2_23 0x180 0x4cc 0x000 0x1 0x0
+#define MX53_PAD_EIM_CS0__ECSPI2_SCLK 0x180 0x4cc 0x7b8 0x2 0x2
+#define MX53_PAD_EIM_CS0__IPU_DI1_PIN5 0x180 0x4cc 0x000 0x3 0x0
+#define MX53_PAD_EIM_CS1__EMI_WEIM_CS_1 0x184 0x4d0 0x000 0x0 0x0
+#define MX53_PAD_EIM_CS1__GPIO2_24 0x184 0x4d0 0x000 0x1 0x0
+#define MX53_PAD_EIM_CS1__ECSPI2_MOSI 0x184 0x4d0 0x7c0 0x2 0x2
+#define MX53_PAD_EIM_CS1__IPU_DI1_PIN6 0x184 0x4d0 0x000 0x3 0x0
+#define MX53_PAD_EIM_OE__EMI_WEIM_OE 0x188 0x4d4 0x000 0x0 0x0
+#define MX53_PAD_EIM_OE__GPIO2_25 0x188 0x4d4 0x000 0x1 0x0
+#define MX53_PAD_EIM_OE__ECSPI2_MISO 0x188 0x4d4 0x7bc 0x2 0x2
+#define MX53_PAD_EIM_OE__IPU_DI1_PIN7 0x188 0x4d4 0x000 0x3 0x0
+#define MX53_PAD_EIM_OE__USBPHY2_IDDIG 0x188 0x4d4 0x000 0x7 0x0
+#define MX53_PAD_EIM_RW__EMI_WEIM_RW 0x18c 0x4d8 0x000 0x0 0x0
+#define MX53_PAD_EIM_RW__GPIO2_26 0x18c 0x4d8 0x000 0x1 0x0
+#define MX53_PAD_EIM_RW__ECSPI2_SS0 0x18c 0x4d8 0x7c4 0x2 0x2
+#define MX53_PAD_EIM_RW__IPU_DI1_PIN8 0x18c 0x4d8 0x000 0x3 0x0
+#define MX53_PAD_EIM_RW__USBPHY2_HOSTDISCONNECT 0x18c 0x4d8 0x000 0x7 0x0
+#define MX53_PAD_EIM_LBA__EMI_WEIM_LBA 0x190 0x4dc 0x000 0x0 0x0
+#define MX53_PAD_EIM_LBA__GPIO2_27 0x190 0x4dc 0x000 0x1 0x0
+#define MX53_PAD_EIM_LBA__ECSPI2_SS1 0x190 0x4dc 0x7c8 0x2 0x1
+#define MX53_PAD_EIM_LBA__IPU_DI1_PIN17 0x190 0x4dc 0x000 0x3 0x0
+#define MX53_PAD_EIM_LBA__SRC_BT_CFG1_0 0x190 0x4dc 0x000 0x7 0x0
+#define MX53_PAD_EIM_EB0__EMI_WEIM_EB_0 0x194 0x4e4 0x000 0x0 0x0
+#define MX53_PAD_EIM_EB0__GPIO2_28 0x194 0x4e4 0x000 0x1 0x0
+#define MX53_PAD_EIM_EB0__IPU_DISP1_DAT_11 0x194 0x4e4 0x000 0x3 0x0
+#define MX53_PAD_EIM_EB0__IPU_CSI1_D_11 0x194 0x4e4 0x000 0x4 0x0
+#define MX53_PAD_EIM_EB0__GPC_PMIC_RDY 0x194 0x4e4 0x810 0x5 0x0
+#define MX53_PAD_EIM_EB0__SRC_BT_CFG2_7 0x194 0x4e4 0x000 0x7 0x0
+#define MX53_PAD_EIM_EB1__EMI_WEIM_EB_1 0x198 0x4e8 0x000 0x0 0x0
+#define MX53_PAD_EIM_EB1__GPIO2_29 0x198 0x4e8 0x000 0x1 0x0
+#define MX53_PAD_EIM_EB1__IPU_DISP1_DAT_10 0x198 0x4e8 0x000 0x3 0x0
+#define MX53_PAD_EIM_EB1__IPU_CSI1_D_10 0x198 0x4e8 0x000 0x4 0x0
+#define MX53_PAD_EIM_EB1__SRC_BT_CFG2_6 0x198 0x4e8 0x000 0x7 0x0
+#define MX53_PAD_EIM_DA0__EMI_NAND_WEIM_DA_0 0x19c 0x4ec 0x000 0x0 0x0
+#define MX53_PAD_EIM_DA0__GPIO3_0 0x19c 0x4ec 0x000 0x1 0x0
+#define MX53_PAD_EIM_DA0__IPU_DISP1_DAT_9 0x19c 0x4ec 0x000 0x3 0x0
+#define MX53_PAD_EIM_DA0__IPU_CSI1_D_9 0x19c 0x4ec 0x000 0x4 0x0
+#define MX53_PAD_EIM_DA0__SRC_BT_CFG2_5 0x19c 0x4ec 0x000 0x7 0x0
+#define MX53_PAD_EIM_DA1__EMI_NAND_WEIM_DA_1 0x1a0 0x4f0 0x000 0x0 0x0
+#define MX53_PAD_EIM_DA1__GPIO3_1 0x1a0 0x4f0 0x000 0x1 0x0
+#define MX53_PAD_EIM_DA1__IPU_DISP1_DAT_8 0x1a0 0x4f0 0x000 0x3 0x0
+#define MX53_PAD_EIM_DA1__IPU_CSI1_D_8 0x1a0 0x4f0 0x000 0x4 0x0
+#define MX53_PAD_EIM_DA1__SRC_BT_CFG2_4 0x1a0 0x4f0 0x000 0x7 0x0
+#define MX53_PAD_EIM_DA2__EMI_NAND_WEIM_DA_2 0x1a4 0x4f4 0x000 0x0 0x0
+#define MX53_PAD_EIM_DA2__GPIO3_2 0x1a4 0x4f4 0x000 0x1 0x0
+#define MX53_PAD_EIM_DA2__IPU_DISP1_DAT_7 0x1a4 0x4f4 0x000 0x3 0x0
+#define MX53_PAD_EIM_DA2__IPU_CSI1_D_7 0x1a4 0x4f4 0x000 0x4 0x0
+#define MX53_PAD_EIM_DA2__SRC_BT_CFG2_3 0x1a4 0x4f4 0x000 0x7 0x0
+#define MX53_PAD_EIM_DA3__EMI_NAND_WEIM_DA_3 0x1a8 0x4f8 0x000 0x0 0x0
+#define MX53_PAD_EIM_DA3__GPIO3_3 0x1a8 0x4f8 0x000 0x1 0x0
+#define MX53_PAD_EIM_DA3__IPU_DISP1_DAT_6 0x1a8 0x4f8 0x000 0x3 0x0
+#define MX53_PAD_EIM_DA3__IPU_CSI1_D_6 0x1a8 0x4f8 0x000 0x4 0x0
+#define MX53_PAD_EIM_DA3__SRC_BT_CFG2_2 0x1a8 0x4f8 0x000 0x7 0x0
+#define MX53_PAD_EIM_DA4__EMI_NAND_WEIM_DA_4 0x1ac 0x4fc 0x000 0x0 0x0
+#define MX53_PAD_EIM_DA4__GPIO3_4 0x1ac 0x4fc 0x000 0x1 0x0
+#define MX53_PAD_EIM_DA4__IPU_DISP1_DAT_5 0x1ac 0x4fc 0x000 0x3 0x0
+#define MX53_PAD_EIM_DA4__IPU_CSI1_D_5 0x1ac 0x4fc 0x000 0x4 0x0
+#define MX53_PAD_EIM_DA4__SRC_BT_CFG3_7 0x1ac 0x4fc 0x000 0x7 0x0
+#define MX53_PAD_EIM_DA5__EMI_NAND_WEIM_DA_5 0x1b0 0x500 0x000 0x0 0x0
+#define MX53_PAD_EIM_DA5__GPIO3_5 0x1b0 0x500 0x000 0x1 0x0
+#define MX53_PAD_EIM_DA5__IPU_DISP1_DAT_4 0x1b0 0x500 0x000 0x3 0x0
+#define MX53_PAD_EIM_DA5__IPU_CSI1_D_4 0x1b0 0x500 0x000 0x4 0x0
+#define MX53_PAD_EIM_DA5__SRC_BT_CFG3_6 0x1b0 0x500 0x000 0x7 0x0
+#define MX53_PAD_EIM_DA6__EMI_NAND_WEIM_DA_6 0x1b4 0x504 0x000 0x0 0x0
+#define MX53_PAD_EIM_DA6__GPIO3_6 0x1b4 0x504 0x000 0x1 0x0
+#define MX53_PAD_EIM_DA6__IPU_DISP1_DAT_3 0x1b4 0x504 0x000 0x3 0x0
+#define MX53_PAD_EIM_DA6__IPU_CSI1_D_3 0x1b4 0x504 0x000 0x4 0x0
+#define MX53_PAD_EIM_DA6__SRC_BT_CFG3_5 0x1b4 0x504 0x000 0x7 0x0
+#define MX53_PAD_EIM_DA7__EMI_NAND_WEIM_DA_7 0x1b8 0x508 0x000 0x0 0x0
+#define MX53_PAD_EIM_DA7__GPIO3_7 0x1b8 0x508 0x000 0x1 0x0
+#define MX53_PAD_EIM_DA7__IPU_DISP1_DAT_2 0x1b8 0x508 0x000 0x3 0x0
+#define MX53_PAD_EIM_DA7__IPU_CSI1_D_2 0x1b8 0x508 0x000 0x4 0x0
+#define MX53_PAD_EIM_DA7__SRC_BT_CFG3_4 0x1b8 0x508 0x000 0x7 0x0
+#define MX53_PAD_EIM_DA8__EMI_NAND_WEIM_DA_8 0x1bc 0x50c 0x000 0x0 0x0
+#define MX53_PAD_EIM_DA8__GPIO3_8 0x1bc 0x50c 0x000 0x1 0x0
+#define MX53_PAD_EIM_DA8__IPU_DISP1_DAT_1 0x1bc 0x50c 0x000 0x3 0x0
+#define MX53_PAD_EIM_DA8__IPU_CSI1_D_1 0x1bc 0x50c 0x000 0x4 0x0
+#define MX53_PAD_EIM_DA8__SRC_BT_CFG3_3 0x1bc 0x50c 0x000 0x7 0x0
+#define MX53_PAD_EIM_DA9__EMI_NAND_WEIM_DA_9 0x1c0 0x510 0x000 0x0 0x0
+#define MX53_PAD_EIM_DA9__GPIO3_9 0x1c0 0x510 0x000 0x1 0x0
+#define MX53_PAD_EIM_DA9__IPU_DISP1_DAT_0 0x1c0 0x510 0x000 0x3 0x0
+#define MX53_PAD_EIM_DA9__IPU_CSI1_D_0 0x1c0 0x510 0x000 0x4 0x0
+#define MX53_PAD_EIM_DA9__SRC_BT_CFG3_2 0x1c0 0x510 0x000 0x7 0x0
+#define MX53_PAD_EIM_DA10__EMI_NAND_WEIM_DA_10 0x1c4 0x514 0x000 0x0 0x0
+#define MX53_PAD_EIM_DA10__GPIO3_10 0x1c4 0x514 0x000 0x1 0x0
+#define MX53_PAD_EIM_DA10__IPU_DI1_PIN15 0x1c4 0x514 0x000 0x3 0x0
+#define MX53_PAD_EIM_DA10__IPU_CSI1_DATA_EN 0x1c4 0x514 0x834 0x4 0x1
+#define MX53_PAD_EIM_DA10__SRC_BT_CFG3_1 0x1c4 0x514 0x000 0x7 0x0
+#define MX53_PAD_EIM_DA11__EMI_NAND_WEIM_DA_11 0x1c8 0x518 0x000 0x0 0x0
+#define MX53_PAD_EIM_DA11__GPIO3_11 0x1c8 0x518 0x000 0x1 0x0
+#define MX53_PAD_EIM_DA11__IPU_DI1_PIN2 0x1c8 0x518 0x000 0x3 0x0
+#define MX53_PAD_EIM_DA11__IPU_CSI1_HSYNC 0x1c8 0x518 0x838 0x4 0x1
+#define MX53_PAD_EIM_DA12__EMI_NAND_WEIM_DA_12 0x1cc 0x51c 0x000 0x0 0x0
+#define MX53_PAD_EIM_DA12__GPIO3_12 0x1cc 0x51c 0x000 0x1 0x0
+#define MX53_PAD_EIM_DA12__IPU_DI1_PIN3 0x1cc 0x51c 0x000 0x3 0x0
+#define MX53_PAD_EIM_DA12__IPU_CSI1_VSYNC 0x1cc 0x51c 0x83c 0x4 0x1
+#define MX53_PAD_EIM_DA13__EMI_NAND_WEIM_DA_13 0x1d0 0x520 0x000 0x0 0x0
+#define MX53_PAD_EIM_DA13__GPIO3_13 0x1d0 0x520 0x000 0x1 0x0
+#define MX53_PAD_EIM_DA13__IPU_DI1_D0_CS 0x1d0 0x520 0x000 0x3 0x0
+#define MX53_PAD_EIM_DA13__CCM_DI1_EXT_CLK 0x1d0 0x520 0x76c 0x4 0x1
+#define MX53_PAD_EIM_DA14__EMI_NAND_WEIM_DA_14 0x1d4 0x524 0x000 0x0 0x0
+#define MX53_PAD_EIM_DA14__GPIO3_14 0x1d4 0x524 0x000 0x1 0x0
+#define MX53_PAD_EIM_DA14__IPU_DI1_D1_CS 0x1d4 0x524 0x000 0x3 0x0
+#define MX53_PAD_EIM_DA14__CCM_DI0_EXT_CLK 0x1d4 0x524 0x000 0x4 0x0
+#define MX53_PAD_EIM_DA15__EMI_NAND_WEIM_DA_15 0x1d8 0x528 0x000 0x0 0x0
+#define MX53_PAD_EIM_DA15__GPIO3_15 0x1d8 0x528 0x000 0x1 0x0
+#define MX53_PAD_EIM_DA15__IPU_DI1_PIN1 0x1d8 0x528 0x000 0x3 0x0
+#define MX53_PAD_EIM_DA15__IPU_DI1_PIN4 0x1d8 0x528 0x000 0x4 0x0
+#define MX53_PAD_NANDF_WE_B__EMI_NANDF_WE_B 0x1dc 0x52c 0x000 0x0 0x0
+#define MX53_PAD_NANDF_WE_B__GPIO6_12 0x1dc 0x52c 0x000 0x1 0x0
+#define MX53_PAD_NANDF_RE_B__EMI_NANDF_RE_B 0x1e0 0x530 0x000 0x0 0x0
+#define MX53_PAD_NANDF_RE_B__GPIO6_13 0x1e0 0x530 0x000 0x1 0x0
+#define MX53_PAD_EIM_WAIT__EMI_WEIM_WAIT 0x1e4 0x534 0x000 0x0 0x0
+#define MX53_PAD_EIM_WAIT__GPIO5_0 0x1e4 0x534 0x000 0x1 0x0
+#define MX53_PAD_EIM_WAIT__EMI_WEIM_DTACK_B 0x1e4 0x534 0x000 0x2 0x0
+#define MX53_PAD_LVDS1_TX3_P__GPIO6_22 0x1ec 0x000 0x000 0x0 0x0
+#define MX53_PAD_LVDS1_TX3_P__LDB_LVDS1_TX3 0x1ec 0x000 0x000 0x1 0x0
+#define MX53_PAD_LVDS1_TX2_P__GPIO6_24 0x1f0 0x000 0x000 0x0 0x0
+#define MX53_PAD_LVDS1_TX2_P__LDB_LVDS1_TX2 0x1f0 0x000 0x000 0x1 0x0
+#define MX53_PAD_LVDS1_CLK_P__GPIO6_26 0x1f4 0x000 0x000 0x0 0x0
+#define MX53_PAD_LVDS1_CLK_P__LDB_LVDS1_CLK 0x1f4 0x000 0x000 0x1 0x0
+#define MX53_PAD_LVDS1_TX1_P__GPIO6_28 0x1f8 0x000 0x000 0x0 0x0
+#define MX53_PAD_LVDS1_TX1_P__LDB_LVDS1_TX1 0x1f8 0x000 0x000 0x1 0x0
+#define MX53_PAD_LVDS1_TX0_P__GPIO6_30 0x1fc 0x000 0x000 0x0 0x0
+#define MX53_PAD_LVDS1_TX0_P__LDB_LVDS1_TX0 0x1fc 0x000 0x000 0x1 0x0
+#define MX53_PAD_LVDS0_TX3_P__GPIO7_22 0x200 0x000 0x000 0x0 0x0
+#define MX53_PAD_LVDS0_TX3_P__LDB_LVDS0_TX3 0x200 0x000 0x000 0x1 0x0
+#define MX53_PAD_LVDS0_CLK_P__GPIO7_24 0x204 0x000 0x000 0x0 0x0
+#define MX53_PAD_LVDS0_CLK_P__LDB_LVDS0_CLK 0x204 0x000 0x000 0x1 0x0
+#define MX53_PAD_LVDS0_TX2_P__GPIO7_26 0x208 0x000 0x000 0x0 0x0
+#define MX53_PAD_LVDS0_TX2_P__LDB_LVDS0_TX2 0x208 0x000 0x000 0x1 0x0
+#define MX53_PAD_LVDS0_TX1_P__GPIO7_28 0x20c 0x000 0x000 0x0 0x0
+#define MX53_PAD_LVDS0_TX1_P__LDB_LVDS0_TX1 0x20c 0x000 0x000 0x1 0x0
+#define MX53_PAD_LVDS0_TX0_P__GPIO7_30 0x210 0x000 0x000 0x0 0x0
+#define MX53_PAD_LVDS0_TX0_P__LDB_LVDS0_TX0 0x210 0x000 0x000 0x1 0x0
+#define MX53_PAD_GPIO_10__GPIO4_0 0x214 0x540 0x000 0x0 0x0
+#define MX53_PAD_GPIO_10__OSC32k_32K_OUT 0x214 0x540 0x000 0x1 0x0
+#define MX53_PAD_GPIO_11__GPIO4_1 0x218 0x544 0x000 0x0 0x0
+#define MX53_PAD_GPIO_12__GPIO4_2 0x21c 0x548 0x000 0x0 0x0
+#define MX53_PAD_GPIO_13__GPIO4_3 0x220 0x54c 0x000 0x0 0x0
+#define MX53_PAD_GPIO_14__GPIO4_4 0x224 0x550 0x000 0x0 0x0
+#define MX53_PAD_NANDF_CLE__EMI_NANDF_CLE 0x228 0x5a0 0x000 0x0 0x0
+#define MX53_PAD_NANDF_CLE__GPIO6_7 0x228 0x5a0 0x000 0x1 0x0
+#define MX53_PAD_NANDF_CLE__USBPHY1_VSTATUS_0 0x228 0x5a0 0x000 0x7 0x0
+#define MX53_PAD_NANDF_ALE__EMI_NANDF_ALE 0x22c 0x5a4 0x000 0x0 0x0
+#define MX53_PAD_NANDF_ALE__GPIO6_8 0x22c 0x5a4 0x000 0x1 0x0
+#define MX53_PAD_NANDF_ALE__USBPHY1_VSTATUS_1 0x22c 0x5a4 0x000 0x7 0x0
+#define MX53_PAD_NANDF_WP_B__EMI_NANDF_WP_B 0x230 0x5a8 0x000 0x0 0x0
+#define MX53_PAD_NANDF_WP_B__GPIO6_9 0x230 0x5a8 0x000 0x1 0x0
+#define MX53_PAD_NANDF_WP_B__USBPHY1_VSTATUS_2 0x230 0x5a8 0x000 0x7 0x0
+#define MX53_PAD_NANDF_RB0__EMI_NANDF_RB_0 0x234 0x5ac 0x000 0x0 0x0
+#define MX53_PAD_NANDF_RB0__GPIO6_10 0x234 0x5ac 0x000 0x1 0x0
+#define MX53_PAD_NANDF_RB0__USBPHY1_VSTATUS_3 0x234 0x5ac 0x000 0x7 0x0
+#define MX53_PAD_NANDF_CS0__EMI_NANDF_CS_0 0x238 0x5b0 0x000 0x0 0x0
+#define MX53_PAD_NANDF_CS0__GPIO6_11 0x238 0x5b0 0x000 0x1 0x0
+#define MX53_PAD_NANDF_CS0__USBPHY1_VSTATUS_4 0x238 0x5b0 0x000 0x7 0x0
+#define MX53_PAD_NANDF_CS1__EMI_NANDF_CS_1 0x23c 0x5b4 0x000 0x0 0x0
+#define MX53_PAD_NANDF_CS1__GPIO6_14 0x23c 0x5b4 0x000 0x1 0x0
+#define MX53_PAD_NANDF_CS1__MLB_MLBCLK 0x23c 0x5b4 0x858 0x6 0x0
+#define MX53_PAD_NANDF_CS1__USBPHY1_VSTATUS_5 0x23c 0x5b4 0x000 0x7 0x0
+#define MX53_PAD_NANDF_CS2__EMI_NANDF_CS_2 0x240 0x5b8 0x000 0x0 0x0
+#define MX53_PAD_NANDF_CS2__GPIO6_15 0x240 0x5b8 0x000 0x1 0x0
+#define MX53_PAD_NANDF_CS2__IPU_SISG_0 0x240 0x5b8 0x000 0x2 0x0
+#define MX53_PAD_NANDF_CS2__ESAI1_TX0 0x240 0x5b8 0x7e4 0x3 0x0
+#define MX53_PAD_NANDF_CS2__EMI_WEIM_CRE 0x240 0x5b8 0x000 0x4 0x0
+#define MX53_PAD_NANDF_CS2__CCM_CSI0_MCLK 0x240 0x5b8 0x000 0x5 0x0
+#define MX53_PAD_NANDF_CS2__MLB_MLBSIG 0x240 0x5b8 0x860 0x6 0x0
+#define MX53_PAD_NANDF_CS2__USBPHY1_VSTATUS_6 0x240 0x5b8 0x000 0x7 0x0
+#define MX53_PAD_NANDF_CS3__EMI_NANDF_CS_3 0x244 0x5bc 0x000 0x0 0x0
+#define MX53_PAD_NANDF_CS3__GPIO6_16 0x244 0x5bc 0x000 0x1 0x0
+#define MX53_PAD_NANDF_CS3__IPU_SISG_1 0x244 0x5bc 0x000 0x2 0x0
+#define MX53_PAD_NANDF_CS3__ESAI1_TX1 0x244 0x5bc 0x7e8 0x3 0x0
+#define MX53_PAD_NANDF_CS3__EMI_WEIM_A_26 0x244 0x5bc 0x000 0x4 0x0
+#define MX53_PAD_NANDF_CS3__MLB_MLBDAT 0x244 0x5bc 0x85c 0x6 0x0
+#define MX53_PAD_NANDF_CS3__USBPHY1_VSTATUS_7 0x244 0x5bc 0x000 0x7 0x0
+#define MX53_PAD_FEC_MDIO__FEC_MDIO 0x248 0x5c4 0x804 0x0 0x1
+#define MX53_PAD_FEC_MDIO__GPIO1_22 0x248 0x5c4 0x000 0x1 0x0
+#define MX53_PAD_FEC_MDIO__ESAI1_SCKR 0x248 0x5c4 0x7dc 0x2 0x0
+#define MX53_PAD_FEC_MDIO__FEC_COL 0x248 0x5c4 0x800 0x3 0x1
+#define MX53_PAD_FEC_MDIO__RTC_CE_RTC_PS2 0x248 0x5c4 0x000 0x4 0x0
+#define MX53_PAD_FEC_MDIO__SDMA_DEBUG_BUS_DEVICE_3 0x248 0x5c4 0x000 0x5 0x0
+#define MX53_PAD_FEC_MDIO__EMI_EMI_DEBUG_49 0x248 0x5c4 0x000 0x6 0x0
+#define MX53_PAD_FEC_REF_CLK__FEC_TX_CLK 0x24c 0x5c8 0x000 0x0 0x0
+#define MX53_PAD_FEC_REF_CLK__GPIO1_23 0x24c 0x5c8 0x000 0x1 0x0
+#define MX53_PAD_FEC_REF_CLK__ESAI1_FSR 0x24c 0x5c8 0x7cc 0x2 0x0
+#define MX53_PAD_FEC_REF_CLK__SDMA_DEBUG_BUS_DEVICE_4 0x24c 0x5c8 0x000 0x5 0x0
+#define MX53_PAD_FEC_REF_CLK__EMI_EMI_DEBUG_50 0x24c 0x5c8 0x000 0x6 0x0
+#define MX53_PAD_FEC_RX_ER__FEC_RX_ER 0x250 0x5cc 0x000 0x0 0x0
+#define MX53_PAD_FEC_RX_ER__GPIO1_24 0x250 0x5cc 0x000 0x1 0x0
+#define MX53_PAD_FEC_RX_ER__ESAI1_HCKR 0x250 0x5cc 0x7d4 0x2 0x0
+#define MX53_PAD_FEC_RX_ER__FEC_RX_CLK 0x250 0x5cc 0x808 0x3 0x1
+#define MX53_PAD_FEC_RX_ER__RTC_CE_RTC_PS3 0x250 0x5cc 0x000 0x4 0x0
+#define MX53_PAD_FEC_CRS_DV__FEC_RX_DV 0x254 0x5d0 0x000 0x0 0x0
+#define MX53_PAD_FEC_CRS_DV__GPIO1_25 0x254 0x5d0 0x000 0x1 0x0
+#define MX53_PAD_FEC_CRS_DV__ESAI1_SCKT 0x254 0x5d0 0x7e0 0x2 0x0
+#define MX53_PAD_FEC_RXD1__FEC_RDATA_1 0x258 0x5d4 0x000 0x0 0x0
+#define MX53_PAD_FEC_RXD1__GPIO1_26 0x258 0x5d4 0x000 0x1 0x0
+#define MX53_PAD_FEC_RXD1__ESAI1_FST 0x258 0x5d4 0x7d0 0x2 0x0
+#define MX53_PAD_FEC_RXD1__MLB_MLBSIG 0x258 0x5d4 0x860 0x3 0x1
+#define MX53_PAD_FEC_RXD1__RTC_CE_RTC_PS1 0x258 0x5d4 0x000 0x4 0x0
+#define MX53_PAD_FEC_RXD0__FEC_RDATA_0 0x25c 0x5d8 0x000 0x0 0x0
+#define MX53_PAD_FEC_RXD0__GPIO1_27 0x25c 0x5d8 0x000 0x1 0x0
+#define MX53_PAD_FEC_RXD0__ESAI1_HCKT 0x25c 0x5d8 0x7d8 0x2 0x0
+#define MX53_PAD_FEC_RXD0__OSC32k_32K_OUT 0x25c 0x5d8 0x000 0x3 0x0
+#define MX53_PAD_FEC_TX_EN__FEC_TX_EN 0x260 0x5dc 0x000 0x0 0x0
+#define MX53_PAD_FEC_TX_EN__GPIO1_28 0x260 0x5dc 0x000 0x1 0x0
+#define MX53_PAD_FEC_TX_EN__ESAI1_TX3_RX2 0x260 0x5dc 0x7f0 0x2 0x0
+#define MX53_PAD_FEC_TXD1__FEC_TDATA_1 0x264 0x5e0 0x000 0x0 0x0
+#define MX53_PAD_FEC_TXD1__GPIO1_29 0x264 0x5e0 0x000 0x1 0x0
+#define MX53_PAD_FEC_TXD1__ESAI1_TX2_RX3 0x264 0x5e0 0x7ec 0x2 0x0
+#define MX53_PAD_FEC_TXD1__MLB_MLBCLK 0x264 0x5e0 0x858 0x3 0x1
+#define MX53_PAD_FEC_TXD1__RTC_CE_RTC_PRSC_CLK 0x264 0x5e0 0x000 0x4 0x0
+#define MX53_PAD_FEC_TXD0__FEC_TDATA_0 0x268 0x5e4 0x000 0x0 0x0
+#define MX53_PAD_FEC_TXD0__GPIO1_30 0x268 0x5e4 0x000 0x1 0x0
+#define MX53_PAD_FEC_TXD0__ESAI1_TX4_RX1 0x268 0x5e4 0x7f4 0x2 0x0
+#define MX53_PAD_FEC_TXD0__USBPHY2_DATAOUT_0 0x268 0x5e4 0x000 0x7 0x0
+#define MX53_PAD_FEC_MDC__FEC_MDC 0x26c 0x5e8 0x000 0x0 0x0
+#define MX53_PAD_FEC_MDC__GPIO1_31 0x26c 0x5e8 0x000 0x1 0x0
+#define MX53_PAD_FEC_MDC__ESAI1_TX5_RX0 0x26c 0x5e8 0x7f8 0x2 0x0
+#define MX53_PAD_FEC_MDC__MLB_MLBDAT 0x26c 0x5e8 0x85c 0x3 0x1
+#define MX53_PAD_FEC_MDC__RTC_CE_RTC_ALARM1_TRIG 0x26c 0x5e8 0x000 0x4 0x0
+#define MX53_PAD_FEC_MDC__USBPHY2_DATAOUT_1 0x26c 0x5e8 0x000 0x7 0x0
+#define MX53_PAD_PATA_DIOW__PATA_DIOW 0x270 0x5f0 0x000 0x0 0x0
+#define MX53_PAD_PATA_DIOW__GPIO6_17 0x270 0x5f0 0x000 0x1 0x0
+#define MX53_PAD_PATA_DIOW__UART1_TXD_MUX 0x270 0x5f0 0x000 0x3 0x0
+#define MX53_PAD_PATA_DIOW__USBPHY2_DATAOUT_2 0x270 0x5f0 0x000 0x7 0x0
+#define MX53_PAD_PATA_DMACK__PATA_DMACK 0x274 0x5f4 0x000 0x0 0x0
+#define MX53_PAD_PATA_DMACK__GPIO6_18 0x274 0x5f4 0x000 0x1 0x0
+#define MX53_PAD_PATA_DMACK__UART1_RXD_MUX 0x274 0x5f4 0x878 0x3 0x3
+#define MX53_PAD_PATA_DMACK__USBPHY2_DATAOUT_3 0x274 0x5f4 0x000 0x7 0x0
+#define MX53_PAD_PATA_DMARQ__PATA_DMARQ 0x278 0x5f8 0x000 0x0 0x0
+#define MX53_PAD_PATA_DMARQ__GPIO7_0 0x278 0x5f8 0x000 0x1 0x0
+#define MX53_PAD_PATA_DMARQ__UART2_TXD_MUX 0x278 0x5f8 0x000 0x3 0x0
+#define MX53_PAD_PATA_DMARQ__CCM_CCM_OUT_0 0x278 0x5f8 0x000 0x5 0x0
+#define MX53_PAD_PATA_DMARQ__USBPHY2_DATAOUT_4 0x278 0x5f8 0x000 0x7 0x0
+#define MX53_PAD_PATA_BUFFER_EN__PATA_BUFFER_EN 0x27c 0x5fc 0x000 0x0 0x0
+#define MX53_PAD_PATA_BUFFER_EN__GPIO7_1 0x27c 0x5fc 0x000 0x1 0x0
+#define MX53_PAD_PATA_BUFFER_EN__UART2_RXD_MUX 0x27c 0x5fc 0x880 0x3 0x3
+#define MX53_PAD_PATA_BUFFER_EN__CCM_CCM_OUT_1 0x27c 0x5fc 0x000 0x5 0x0
+#define MX53_PAD_PATA_BUFFER_EN__USBPHY2_DATAOUT_5 0x27c 0x5fc 0x000 0x7 0x0
+#define MX53_PAD_PATA_INTRQ__PATA_INTRQ 0x280 0x600 0x000 0x0 0x0
+#define MX53_PAD_PATA_INTRQ__GPIO7_2 0x280 0x600 0x000 0x1 0x0
+#define MX53_PAD_PATA_INTRQ__UART2_CTS 0x280 0x600 0x000 0x3 0x0
+#define MX53_PAD_PATA_INTRQ__CAN1_TXCAN 0x280 0x600 0x000 0x4 0x0
+#define MX53_PAD_PATA_INTRQ__CCM_CCM_OUT_2 0x280 0x600 0x000 0x5 0x0
+#define MX53_PAD_PATA_INTRQ__USBPHY2_DATAOUT_6 0x280 0x600 0x000 0x7 0x0
+#define MX53_PAD_PATA_DIOR__PATA_DIOR 0x284 0x604 0x000 0x0 0x0
+#define MX53_PAD_PATA_DIOR__GPIO7_3 0x284 0x604 0x000 0x1 0x0
+#define MX53_PAD_PATA_DIOR__UART2_RTS 0x284 0x604 0x87c 0x3 0x3
+#define MX53_PAD_PATA_DIOR__CAN1_RXCAN 0x284 0x604 0x760 0x4 0x1
+#define MX53_PAD_PATA_DIOR__USBPHY2_DATAOUT_7 0x284 0x604 0x000 0x7 0x0
+#define MX53_PAD_PATA_RESET_B__PATA_PATA_RESET_B 0x288 0x608 0x000 0x0 0x0
+#define MX53_PAD_PATA_RESET_B__GPIO7_4 0x288 0x608 0x000 0x1 0x0
+#define MX53_PAD_PATA_RESET_B__ESDHC3_CMD 0x288 0x608 0x000 0x2 0x0
+#define MX53_PAD_PATA_RESET_B__UART1_CTS 0x288 0x608 0x000 0x3 0x0
+#define MX53_PAD_PATA_RESET_B__CAN2_TXCAN 0x288 0x608 0x000 0x4 0x0
+#define MX53_PAD_PATA_RESET_B__USBPHY1_DATAOUT_0 0x288 0x608 0x000 0x7 0x0
+#define MX53_PAD_PATA_IORDY__PATA_IORDY 0x28c 0x60c 0x000 0x0 0x0
+#define MX53_PAD_PATA_IORDY__GPIO7_5 0x28c 0x60c 0x000 0x1 0x0
+#define MX53_PAD_PATA_IORDY__ESDHC3_CLK 0x28c 0x60c 0x000 0x2 0x0
+#define MX53_PAD_PATA_IORDY__UART1_RTS 0x28c 0x60c 0x874 0x3 0x3
+#define MX53_PAD_PATA_IORDY__CAN2_RXCAN 0x28c 0x60c 0x764 0x4 0x1
+#define MX53_PAD_PATA_IORDY__USBPHY1_DATAOUT_1 0x28c 0x60c 0x000 0x7 0x0
+#define MX53_PAD_PATA_DA_0__PATA_DA_0 0x290 0x610 0x000 0x0 0x0
+#define MX53_PAD_PATA_DA_0__GPIO7_6 0x290 0x610 0x000 0x1 0x0
+#define MX53_PAD_PATA_DA_0__ESDHC3_RST 0x290 0x610 0x000 0x2 0x0
+#define MX53_PAD_PATA_DA_0__OWIRE_LINE 0x290 0x610 0x864 0x4 0x0
+#define MX53_PAD_PATA_DA_0__USBPHY1_DATAOUT_2 0x290 0x610 0x000 0x7 0x0
+#define MX53_PAD_PATA_DA_1__PATA_DA_1 0x294 0x614 0x000 0x0 0x0
+#define MX53_PAD_PATA_DA_1__GPIO7_7 0x294 0x614 0x000 0x1 0x0
+#define MX53_PAD_PATA_DA_1__ESDHC4_CMD 0x294 0x614 0x000 0x2 0x0
+#define MX53_PAD_PATA_DA_1__UART3_CTS 0x294 0x614 0x000 0x4 0x0
+#define MX53_PAD_PATA_DA_1__USBPHY1_DATAOUT_3 0x294 0x614 0x000 0x7 0x0
+#define MX53_PAD_PATA_DA_2__PATA_DA_2 0x298 0x618 0x000 0x0 0x0
+#define MX53_PAD_PATA_DA_2__GPIO7_8 0x298 0x618 0x000 0x1 0x0
+#define MX53_PAD_PATA_DA_2__ESDHC4_CLK 0x298 0x618 0x000 0x2 0x0
+#define MX53_PAD_PATA_DA_2__UART3_RTS 0x298 0x618 0x884 0x4 0x5
+#define MX53_PAD_PATA_DA_2__USBPHY1_DATAOUT_4 0x298 0x618 0x000 0x7 0x0
+#define MX53_PAD_PATA_CS_0__PATA_CS_0 0x29c 0x61c 0x000 0x0 0x0
+#define MX53_PAD_PATA_CS_0__GPIO7_9 0x29c 0x61c 0x000 0x1 0x0
+#define MX53_PAD_PATA_CS_0__UART3_TXD_MUX 0x29c 0x61c 0x000 0x4 0x0
+#define MX53_PAD_PATA_CS_0__USBPHY1_DATAOUT_5 0x29c 0x61c 0x000 0x7 0x0
+#define MX53_PAD_PATA_CS_1__PATA_CS_1 0x2a0 0x620 0x000 0x0 0x0
+#define MX53_PAD_PATA_CS_1__GPIO7_10 0x2a0 0x620 0x000 0x1 0x0
+#define MX53_PAD_PATA_CS_1__UART3_RXD_MUX 0x2a0 0x620 0x888 0x4 0x3
+#define MX53_PAD_PATA_CS_1__USBPHY1_DATAOUT_6 0x2a0 0x620 0x000 0x7 0x0
+#define MX53_PAD_PATA_DATA0__PATA_DATA_0 0x2a4 0x628 0x000 0x0 0x0
+#define MX53_PAD_PATA_DATA0__GPIO2_0 0x2a4 0x628 0x000 0x1 0x0
+#define MX53_PAD_PATA_DATA0__EMI_NANDF_D_0 0x2a4 0x628 0x000 0x3 0x0
+#define MX53_PAD_PATA_DATA0__ESDHC3_DAT4 0x2a4 0x628 0x000 0x4 0x0
+#define MX53_PAD_PATA_DATA0__GPU3d_GPU_DEBUG_OUT_0 0x2a4 0x628 0x000 0x5 0x0
+#define MX53_PAD_PATA_DATA0__IPU_DIAG_BUS_0 0x2a4 0x628 0x000 0x6 0x0
+#define MX53_PAD_PATA_DATA0__USBPHY1_DATAOUT_7 0x2a4 0x628 0x000 0x7 0x0
+#define MX53_PAD_PATA_DATA1__PATA_DATA_1 0x2a8 0x62c 0x000 0x0 0x0
+#define MX53_PAD_PATA_DATA1__GPIO2_1 0x2a8 0x62c 0x000 0x1 0x0
+#define MX53_PAD_PATA_DATA1__EMI_NANDF_D_1 0x2a8 0x62c 0x000 0x3 0x0
+#define MX53_PAD_PATA_DATA1__ESDHC3_DAT5 0x2a8 0x62c 0x000 0x4 0x0
+#define MX53_PAD_PATA_DATA1__GPU3d_GPU_DEBUG_OUT_1 0x2a8 0x62c 0x000 0x5 0x0
+#define MX53_PAD_PATA_DATA1__IPU_DIAG_BUS_1 0x2a8 0x62c 0x000 0x6 0x0
+#define MX53_PAD_PATA_DATA2__PATA_DATA_2 0x2ac 0x630 0x000 0x0 0x0
+#define MX53_PAD_PATA_DATA2__GPIO2_2 0x2ac 0x630 0x000 0x1 0x0
+#define MX53_PAD_PATA_DATA2__EMI_NANDF_D_2 0x2ac 0x630 0x000 0x3 0x0
+#define MX53_PAD_PATA_DATA2__ESDHC3_DAT6 0x2ac 0x630 0x000 0x4 0x0
+#define MX53_PAD_PATA_DATA2__GPU3d_GPU_DEBUG_OUT_2 0x2ac 0x630 0x000 0x5 0x0
+#define MX53_PAD_PATA_DATA2__IPU_DIAG_BUS_2 0x2ac 0x630 0x000 0x6 0x0
+#define MX53_PAD_PATA_DATA3__PATA_DATA_3 0x2b0 0x634 0x000 0x0 0x0
+#define MX53_PAD_PATA_DATA3__GPIO2_3 0x2b0 0x634 0x000 0x1 0x0
+#define MX53_PAD_PATA_DATA3__EMI_NANDF_D_3 0x2b0 0x634 0x000 0x3 0x0
+#define MX53_PAD_PATA_DATA3__ESDHC3_DAT7 0x2b0 0x634 0x000 0x4 0x0
+#define MX53_PAD_PATA_DATA3__GPU3d_GPU_DEBUG_OUT_3 0x2b0 0x634 0x000 0x5 0x0
+#define MX53_PAD_PATA_DATA3__IPU_DIAG_BUS_3 0x2b0 0x634 0x000 0x6 0x0
+#define MX53_PAD_PATA_DATA4__PATA_DATA_4 0x2b4 0x638 0x000 0x0 0x0
+#define MX53_PAD_PATA_DATA4__GPIO2_4 0x2b4 0x638 0x000 0x1 0x0
+#define MX53_PAD_PATA_DATA4__EMI_NANDF_D_4 0x2b4 0x638 0x000 0x3 0x0
+#define MX53_PAD_PATA_DATA4__ESDHC4_DAT4 0x2b4 0x638 0x000 0x4 0x0
+#define MX53_PAD_PATA_DATA4__GPU3d_GPU_DEBUG_OUT_4 0x2b4 0x638 0x000 0x5 0x0
+#define MX53_PAD_PATA_DATA4__IPU_DIAG_BUS_4 0x2b4 0x638 0x000 0x6 0x0
+#define MX53_PAD_PATA_DATA5__PATA_DATA_5 0x2b8 0x63c 0x000 0x0 0x0
+#define MX53_PAD_PATA_DATA5__GPIO2_5 0x2b8 0x63c 0x000 0x1 0x0
+#define MX53_PAD_PATA_DATA5__EMI_NANDF_D_5 0x2b8 0x63c 0x000 0x3 0x0
+#define MX53_PAD_PATA_DATA5__ESDHC4_DAT5 0x2b8 0x63c 0x000 0x4 0x0
+#define MX53_PAD_PATA_DATA5__GPU3d_GPU_DEBUG_OUT_5 0x2b8 0x63c 0x000 0x5 0x0
+#define MX53_PAD_PATA_DATA5__IPU_DIAG_BUS_5 0x2b8 0x63c 0x000 0x6 0x0
+#define MX53_PAD_PATA_DATA6__PATA_DATA_6 0x2bc 0x640 0x000 0x0 0x0
+#define MX53_PAD_PATA_DATA6__GPIO2_6 0x2bc 0x640 0x000 0x1 0x0
+#define MX53_PAD_PATA_DATA6__EMI_NANDF_D_6 0x2bc 0x640 0x000 0x3 0x0
+#define MX53_PAD_PATA_DATA6__ESDHC4_DAT6 0x2bc 0x640 0x000 0x4 0x0
+#define MX53_PAD_PATA_DATA6__GPU3d_GPU_DEBUG_OUT_6 0x2bc 0x640 0x000 0x5 0x0
+#define MX53_PAD_PATA_DATA6__IPU_DIAG_BUS_6 0x2bc 0x640 0x000 0x6 0x0
+#define MX53_PAD_PATA_DATA7__PATA_DATA_7 0x2c0 0x644 0x000 0x0 0x0
+#define MX53_PAD_PATA_DATA7__GPIO2_7 0x2c0 0x644 0x000 0x1 0x0
+#define MX53_PAD_PATA_DATA7__EMI_NANDF_D_7 0x2c0 0x644 0x000 0x3 0x0
+#define MX53_PAD_PATA_DATA7__ESDHC4_DAT7 0x2c0 0x644 0x000 0x4 0x0
+#define MX53_PAD_PATA_DATA7__GPU3d_GPU_DEBUG_OUT_7 0x2c0 0x644 0x000 0x5 0x0
+#define MX53_PAD_PATA_DATA7__IPU_DIAG_BUS_7 0x2c0 0x644 0x000 0x6 0x0
+#define MX53_PAD_PATA_DATA8__PATA_DATA_8 0x2c4 0x648 0x000 0x0 0x0
+#define MX53_PAD_PATA_DATA8__GPIO2_8 0x2c4 0x648 0x000 0x1 0x0
+#define MX53_PAD_PATA_DATA8__ESDHC1_DAT4 0x2c4 0x648 0x000 0x2 0x0
+#define MX53_PAD_PATA_DATA8__EMI_NANDF_D_8 0x2c4 0x648 0x000 0x3 0x0
+#define MX53_PAD_PATA_DATA8__ESDHC3_DAT0 0x2c4 0x648 0x000 0x4 0x0
+#define MX53_PAD_PATA_DATA8__GPU3d_GPU_DEBUG_OUT_8 0x2c4 0x648 0x000 0x5 0x0
+#define MX53_PAD_PATA_DATA8__IPU_DIAG_BUS_8 0x2c4 0x648 0x000 0x6 0x0
+#define MX53_PAD_PATA_DATA9__PATA_DATA_9 0x2c8 0x64c 0x000 0x0 0x0
+#define MX53_PAD_PATA_DATA9__GPIO2_9 0x2c8 0x64c 0x000 0x1 0x0
+#define MX53_PAD_PATA_DATA9__ESDHC1_DAT5 0x2c8 0x64c 0x000 0x2 0x0
+#define MX53_PAD_PATA_DATA9__EMI_NANDF_D_9 0x2c8 0x64c 0x000 0x3 0x0
+#define MX53_PAD_PATA_DATA9__ESDHC3_DAT1 0x2c8 0x64c 0x000 0x4 0x0
+#define MX53_PAD_PATA_DATA9__GPU3d_GPU_DEBUG_OUT_9 0x2c8 0x64c 0x000 0x5 0x0
+#define MX53_PAD_PATA_DATA9__IPU_DIAG_BUS_9 0x2c8 0x64c 0x000 0x6 0x0
+#define MX53_PAD_PATA_DATA10__PATA_DATA_10 0x2cc 0x650 0x000 0x0 0x0
+#define MX53_PAD_PATA_DATA10__GPIO2_10 0x2cc 0x650 0x000 0x1 0x0
+#define MX53_PAD_PATA_DATA10__ESDHC1_DAT6 0x2cc 0x650 0x000 0x2 0x0
+#define MX53_PAD_PATA_DATA10__EMI_NANDF_D_10 0x2cc 0x650 0x000 0x3 0x0
+#define MX53_PAD_PATA_DATA10__ESDHC3_DAT2 0x2cc 0x650 0x000 0x4 0x0
+#define MX53_PAD_PATA_DATA10__GPU3d_GPU_DEBUG_OUT_10 0x2cc 0x650 0x000 0x5 0x0
+#define MX53_PAD_PATA_DATA10__IPU_DIAG_BUS_10 0x2cc 0x650 0x000 0x6 0x0
+#define MX53_PAD_PATA_DATA11__PATA_DATA_11 0x2d0 0x654 0x000 0x0 0x0
+#define MX53_PAD_PATA_DATA11__GPIO2_11 0x2d0 0x654 0x000 0x1 0x0
+#define MX53_PAD_PATA_DATA11__ESDHC1_DAT7 0x2d0 0x654 0x000 0x2 0x0
+#define MX53_PAD_PATA_DATA11__EMI_NANDF_D_11 0x2d0 0x654 0x000 0x3 0x0
+#define MX53_PAD_PATA_DATA11__ESDHC3_DAT3 0x2d0 0x654 0x000 0x4 0x0
+#define MX53_PAD_PATA_DATA11__GPU3d_GPU_DEBUG_OUT_11 0x2d0 0x654 0x000 0x5 0x0
+#define MX53_PAD_PATA_DATA11__IPU_DIAG_BUS_11 0x2d0 0x654 0x000 0x6 0x0
+#define MX53_PAD_PATA_DATA12__PATA_DATA_12 0x2d4 0x658 0x000 0x0 0x0
+#define MX53_PAD_PATA_DATA12__GPIO2_12 0x2d4 0x658 0x000 0x1 0x0
+#define MX53_PAD_PATA_DATA12__ESDHC2_DAT4 0x2d4 0x658 0x000 0x2 0x0
+#define MX53_PAD_PATA_DATA12__EMI_NANDF_D_12 0x2d4 0x658 0x000 0x3 0x0
+#define MX53_PAD_PATA_DATA12__ESDHC4_DAT0 0x2d4 0x658 0x000 0x4 0x0
+#define MX53_PAD_PATA_DATA12__GPU3d_GPU_DEBUG_OUT_12 0x2d4 0x658 0x000 0x5 0x0
+#define MX53_PAD_PATA_DATA12__IPU_DIAG_BUS_12 0x2d4 0x658 0x000 0x6 0x0
+#define MX53_PAD_PATA_DATA13__PATA_DATA_13 0x2d8 0x65c 0x000 0x0 0x0
+#define MX53_PAD_PATA_DATA13__GPIO2_13 0x2d8 0x65c 0x000 0x1 0x0
+#define MX53_PAD_PATA_DATA13__ESDHC2_DAT5 0x2d8 0x65c 0x000 0x2 0x0
+#define MX53_PAD_PATA_DATA13__EMI_NANDF_D_13 0x2d8 0x65c 0x000 0x3 0x0
+#define MX53_PAD_PATA_DATA13__ESDHC4_DAT1 0x2d8 0x65c 0x000 0x4 0x0
+#define MX53_PAD_PATA_DATA13__GPU3d_GPU_DEBUG_OUT_13 0x2d8 0x65c 0x000 0x5 0x0
+#define MX53_PAD_PATA_DATA13__IPU_DIAG_BUS_13 0x2d8 0x65c 0x000 0x6 0x0
+#define MX53_PAD_PATA_DATA14__PATA_DATA_14 0x2dc 0x660 0x000 0x0 0x0
+#define MX53_PAD_PATA_DATA14__GPIO2_14 0x2dc 0x660 0x000 0x1 0x0
+#define MX53_PAD_PATA_DATA14__ESDHC2_DAT6 0x2dc 0x660 0x000 0x2 0x0
+#define MX53_PAD_PATA_DATA14__EMI_NANDF_D_14 0x2dc 0x660 0x000 0x3 0x0
+#define MX53_PAD_PATA_DATA14__ESDHC4_DAT2 0x2dc 0x660 0x000 0x4 0x0
+#define MX53_PAD_PATA_DATA14__GPU3d_GPU_DEBUG_OUT_14 0x2dc 0x660 0x000 0x5 0x0
+#define MX53_PAD_PATA_DATA14__IPU_DIAG_BUS_14 0x2dc 0x660 0x000 0x6 0x0
+#define MX53_PAD_PATA_DATA15__PATA_DATA_15 0x2e0 0x664 0x000 0x0 0x0
+#define MX53_PAD_PATA_DATA15__GPIO2_15 0x2e0 0x664 0x000 0x1 0x0
+#define MX53_PAD_PATA_DATA15__ESDHC2_DAT7 0x2e0 0x664 0x000 0x2 0x0
+#define MX53_PAD_PATA_DATA15__EMI_NANDF_D_15 0x2e0 0x664 0x000 0x3 0x0
+#define MX53_PAD_PATA_DATA15__ESDHC4_DAT3 0x2e0 0x664 0x000 0x4 0x0
+#define MX53_PAD_PATA_DATA15__GPU3d_GPU_DEBUG_OUT_15 0x2e0 0x664 0x000 0x5 0x0
+#define MX53_PAD_PATA_DATA15__IPU_DIAG_BUS_15 0x2e0 0x664 0x000 0x6 0x0
+#define MX53_PAD_SD1_DATA0__ESDHC1_DAT0 0x2e4 0x66c 0x000 0x0 0x0
+#define MX53_PAD_SD1_DATA0__GPIO1_16 0x2e4 0x66c 0x000 0x1 0x0
+#define MX53_PAD_SD1_DATA0__GPT_CAPIN1 0x2e4 0x66c 0x000 0x3 0x0
+#define MX53_PAD_SD1_DATA0__CSPI_MISO 0x2e4 0x66c 0x784 0x5 0x2
+#define MX53_PAD_SD1_DATA0__CCM_PLL3_BYP 0x2e4 0x66c 0x778 0x7 0x0
+#define MX53_PAD_SD1_DATA1__ESDHC1_DAT1 0x2e8 0x670 0x000 0x0 0x0
+#define MX53_PAD_SD1_DATA1__GPIO1_17 0x2e8 0x670 0x000 0x1 0x0
+#define MX53_PAD_SD1_DATA1__GPT_CAPIN2 0x2e8 0x670 0x000 0x3 0x0
+#define MX53_PAD_SD1_DATA1__CSPI_SS0 0x2e8 0x670 0x78c 0x5 0x3
+#define MX53_PAD_SD1_DATA1__CCM_PLL4_BYP 0x2e8 0x670 0x77c 0x7 0x1
+#define MX53_PAD_SD1_CMD__ESDHC1_CMD 0x2ec 0x674 0x000 0x0 0x0
+#define MX53_PAD_SD1_CMD__GPIO1_18 0x2ec 0x674 0x000 0x1 0x0
+#define MX53_PAD_SD1_CMD__GPT_CMPOUT1 0x2ec 0x674 0x000 0x3 0x0
+#define MX53_PAD_SD1_CMD__CSPI_MOSI 0x2ec 0x674 0x788 0x5 0x2
+#define MX53_PAD_SD1_CMD__CCM_PLL1_BYP 0x2ec 0x674 0x770 0x7 0x0
+#define MX53_PAD_SD1_DATA2__ESDHC1_DAT2 0x2f0 0x678 0x000 0x0 0x0
+#define MX53_PAD_SD1_DATA2__GPIO1_19 0x2f0 0x678 0x000 0x1 0x0
+#define MX53_PAD_SD1_DATA2__GPT_CMPOUT2 0x2f0 0x678 0x000 0x2 0x0
+#define MX53_PAD_SD1_DATA2__PWM2_PWMO 0x2f0 0x678 0x000 0x3 0x0
+#define MX53_PAD_SD1_DATA2__WDOG1_WDOG_B 0x2f0 0x678 0x000 0x4 0x0
+#define MX53_PAD_SD1_DATA2__CSPI_SS1 0x2f0 0x678 0x790 0x5 0x2
+#define MX53_PAD_SD1_DATA2__WDOG1_WDOG_RST_B_DEB 0x2f0 0x678 0x000 0x6 0x0
+#define MX53_PAD_SD1_DATA2__CCM_PLL2_BYP 0x2f0 0x678 0x774 0x7 0x0
+#define MX53_PAD_SD1_CLK__ESDHC1_CLK 0x2f4 0x67c 0x000 0x0 0x0
+#define MX53_PAD_SD1_CLK__GPIO1_20 0x2f4 0x67c 0x000 0x1 0x0
+#define MX53_PAD_SD1_CLK__OSC32k_32K_OUT 0x2f4 0x67c 0x000 0x2 0x0
+#define MX53_PAD_SD1_CLK__GPT_CLKIN 0x2f4 0x67c 0x000 0x3 0x0
+#define MX53_PAD_SD1_CLK__CSPI_SCLK 0x2f4 0x67c 0x780 0x5 0x2
+#define MX53_PAD_SD1_CLK__SATA_PHY_DTB_0 0x2f4 0x67c 0x000 0x7 0x0
+#define MX53_PAD_SD1_DATA3__ESDHC1_DAT3 0x2f8 0x680 0x000 0x0 0x0
+#define MX53_PAD_SD1_DATA3__GPIO1_21 0x2f8 0x680 0x000 0x1 0x0
+#define MX53_PAD_SD1_DATA3__GPT_CMPOUT3 0x2f8 0x680 0x000 0x2 0x0
+#define MX53_PAD_SD1_DATA3__PWM1_PWMO 0x2f8 0x680 0x000 0x3 0x0
+#define MX53_PAD_SD1_DATA3__WDOG2_WDOG_B 0x2f8 0x680 0x000 0x4 0x0
+#define MX53_PAD_SD1_DATA3__CSPI_SS2 0x2f8 0x680 0x794 0x5 0x2
+#define MX53_PAD_SD1_DATA3__WDOG2_WDOG_RST_B_DEB 0x2f8 0x680 0x000 0x6 0x0
+#define MX53_PAD_SD1_DATA3__SATA_PHY_DTB_1 0x2f8 0x680 0x000 0x7 0x0
+#define MX53_PAD_SD2_CLK__ESDHC2_CLK 0x2fc 0x688 0x000 0x0 0x0
+#define MX53_PAD_SD2_CLK__GPIO1_10 0x2fc 0x688 0x000 0x1 0x0
+#define MX53_PAD_SD2_CLK__KPP_COL_5 0x2fc 0x688 0x840 0x2 0x2
+#define MX53_PAD_SD2_CLK__AUDMUX_AUD4_RXFS 0x2fc 0x688 0x73c 0x3 0x1
+#define MX53_PAD_SD2_CLK__CSPI_SCLK 0x2fc 0x688 0x780 0x5 0x3
+#define MX53_PAD_SD2_CLK__SCC_RANDOM_V 0x2fc 0x688 0x000 0x7 0x0
+#define MX53_PAD_SD2_CMD__ESDHC2_CMD 0x300 0x68c 0x000 0x0 0x0
+#define MX53_PAD_SD2_CMD__GPIO1_11 0x300 0x68c 0x000 0x1 0x0
+#define MX53_PAD_SD2_CMD__KPP_ROW_5 0x300 0x68c 0x84c 0x2 0x1
+#define MX53_PAD_SD2_CMD__AUDMUX_AUD4_RXC 0x300 0x68c 0x738 0x3 0x1
+#define MX53_PAD_SD2_CMD__CSPI_MOSI 0x300 0x68c 0x788 0x5 0x3
+#define MX53_PAD_SD2_CMD__SCC_RANDOM 0x300 0x68c 0x000 0x7 0x0
+#define MX53_PAD_SD2_DATA3__ESDHC2_DAT3 0x304 0x690 0x000 0x0 0x0
+#define MX53_PAD_SD2_DATA3__GPIO1_12 0x304 0x690 0x000 0x1 0x0
+#define MX53_PAD_SD2_DATA3__KPP_COL_6 0x304 0x690 0x844 0x2 0x1
+#define MX53_PAD_SD2_DATA3__AUDMUX_AUD4_TXC 0x304 0x690 0x740 0x3 0x1
+#define MX53_PAD_SD2_DATA3__CSPI_SS2 0x304 0x690 0x794 0x5 0x3
+#define MX53_PAD_SD2_DATA3__SJC_DONE 0x304 0x690 0x000 0x7 0x0
+#define MX53_PAD_SD2_DATA2__ESDHC2_DAT2 0x308 0x694 0x000 0x0 0x0
+#define MX53_PAD_SD2_DATA2__GPIO1_13 0x308 0x694 0x000 0x1 0x0
+#define MX53_PAD_SD2_DATA2__KPP_ROW_6 0x308 0x694 0x850 0x2 0x1
+#define MX53_PAD_SD2_DATA2__AUDMUX_AUD4_TXD 0x308 0x694 0x734 0x3 0x1
+#define MX53_PAD_SD2_DATA2__CSPI_SS1 0x308 0x694 0x790 0x5 0x3
+#define MX53_PAD_SD2_DATA2__SJC_FAIL 0x308 0x694 0x000 0x7 0x0
+#define MX53_PAD_SD2_DATA1__ESDHC2_DAT1 0x30c 0x698 0x000 0x0 0x0
+#define MX53_PAD_SD2_DATA1__GPIO1_14 0x30c 0x698 0x000 0x1 0x0
+#define MX53_PAD_SD2_DATA1__KPP_COL_7 0x30c 0x698 0x848 0x2 0x1
+#define MX53_PAD_SD2_DATA1__AUDMUX_AUD4_TXFS 0x30c 0x698 0x744 0x3 0x1
+#define MX53_PAD_SD2_DATA1__CSPI_SS0 0x30c 0x698 0x78c 0x5 0x4
+#define MX53_PAD_SD2_DATA1__RTIC_SEC_VIO 0x30c 0x698 0x000 0x7 0x0
+#define MX53_PAD_SD2_DATA0__ESDHC2_DAT0 0x310 0x69c 0x000 0x0 0x0
+#define MX53_PAD_SD2_DATA0__GPIO1_15 0x310 0x69c 0x000 0x1 0x0
+#define MX53_PAD_SD2_DATA0__KPP_ROW_7 0x310 0x69c 0x854 0x2 0x1
+#define MX53_PAD_SD2_DATA0__AUDMUX_AUD4_RXD 0x310 0x69c 0x730 0x3 0x1
+#define MX53_PAD_SD2_DATA0__CSPI_MISO 0x310 0x69c 0x784 0x5 0x3
+#define MX53_PAD_SD2_DATA0__RTIC_DONE_INT 0x310 0x69c 0x000 0x7 0x0
+#define MX53_PAD_GPIO_0__CCM_CLKO 0x314 0x6a4 0x000 0x0 0x0
+#define MX53_PAD_GPIO_0__GPIO1_0 0x314 0x6a4 0x000 0x1 0x0
+#define MX53_PAD_GPIO_0__KPP_COL_5 0x314 0x6a4 0x840 0x2 0x3
+#define MX53_PAD_GPIO_0__CCM_SSI_EXT1_CLK 0x314 0x6a4 0x000 0x3 0x0
+#define MX53_PAD_GPIO_0__EPIT1_EPITO 0x314 0x6a4 0x000 0x4 0x0
+#define MX53_PAD_GPIO_0__SRTC_ALARM_DEB 0x314 0x6a4 0x000 0x5 0x0
+#define MX53_PAD_GPIO_0__USBOH3_USBH1_PWR 0x314 0x6a4 0x000 0x6 0x0
+#define MX53_PAD_GPIO_0__CSU_TD 0x314 0x6a4 0x000 0x7 0x0
+#define MX53_PAD_GPIO_1__ESAI1_SCKR 0x318 0x6a8 0x7dc 0x0 0x1
+#define MX53_PAD_GPIO_1__GPIO1_1 0x318 0x6a8 0x000 0x1 0x0
+#define MX53_PAD_GPIO_1__KPP_ROW_5 0x318 0x6a8 0x84c 0x2 0x2
+#define MX53_PAD_GPIO_1__CCM_SSI_EXT2_CLK 0x318 0x6a8 0x000 0x3 0x0
+#define MX53_PAD_GPIO_1__PWM2_PWMO 0x318 0x6a8 0x000 0x4 0x0
+#define MX53_PAD_GPIO_1__WDOG2_WDOG_B 0x318 0x6a8 0x000 0x5 0x0
+#define MX53_PAD_GPIO_1__ESDHC1_CD 0x318 0x6a8 0x000 0x6 0x0
+#define MX53_PAD_GPIO_1__SRC_TESTER_ACK 0x318 0x6a8 0x000 0x7 0x0
+#define MX53_PAD_GPIO_9__ESAI1_FSR 0x31c 0x6ac 0x7cc 0x0 0x1
+#define MX53_PAD_GPIO_9__GPIO1_9 0x31c 0x6ac 0x000 0x1 0x0
+#define MX53_PAD_GPIO_9__KPP_COL_6 0x31c 0x6ac 0x844 0x2 0x2
+#define MX53_PAD_GPIO_9__CCM_REF_EN_B 0x31c 0x6ac 0x000 0x3 0x0
+#define MX53_PAD_GPIO_9__PWM1_PWMO 0x31c 0x6ac 0x000 0x4 0x0
+#define MX53_PAD_GPIO_9__WDOG1_WDOG_B 0x31c 0x6ac 0x000 0x5 0x0
+#define MX53_PAD_GPIO_9__ESDHC1_WP 0x31c 0x6ac 0x7fc 0x6 0x1
+#define MX53_PAD_GPIO_9__SCC_FAIL_STATE 0x31c 0x6ac 0x000 0x7 0x0
+#define MX53_PAD_GPIO_3__ESAI1_HCKR 0x320 0x6b0 0x7d4 0x0 0x1
+#define MX53_PAD_GPIO_3__GPIO1_3 0x320 0x6b0 0x000 0x1 0x0
+#define MX53_PAD_GPIO_3__I2C3_SCL 0x320 0x6b0 0x824 0x2 0x1
+#define MX53_PAD_GPIO_3__DPLLIP1_TOG_EN 0x320 0x6b0 0x000 0x3 0x0
+#define MX53_PAD_GPIO_3__CCM_CLKO2 0x320 0x6b0 0x000 0x4 0x0
+#define MX53_PAD_GPIO_3__OBSERVE_MUX_OBSRV_INT_OUT0 0x320 0x6b0 0x000 0x5 0x0
+#define MX53_PAD_GPIO_3__USBOH3_USBH1_OC 0x320 0x6b0 0x8a0 0x6 0x1
+#define MX53_PAD_GPIO_3__MLB_MLBCLK 0x320 0x6b0 0x858 0x7 0x2
+#define MX53_PAD_GPIO_6__ESAI1_SCKT 0x324 0x6b4 0x7e0 0x0 0x1
+#define MX53_PAD_GPIO_6__GPIO1_6 0x324 0x6b4 0x000 0x1 0x0
+#define MX53_PAD_GPIO_6__I2C3_SDA 0x324 0x6b4 0x828 0x2 0x1
+#define MX53_PAD_GPIO_6__CCM_CCM_OUT_0 0x324 0x6b4 0x000 0x3 0x0
+#define MX53_PAD_GPIO_6__CSU_CSU_INT_DEB 0x324 0x6b4 0x000 0x4 0x0
+#define MX53_PAD_GPIO_6__OBSERVE_MUX_OBSRV_INT_OUT1 0x324 0x6b4 0x000 0x5 0x0
+#define MX53_PAD_GPIO_6__ESDHC2_LCTL 0x324 0x6b4 0x000 0x6 0x0
+#define MX53_PAD_GPIO_6__MLB_MLBSIG 0x324 0x6b4 0x860 0x7 0x2
+#define MX53_PAD_GPIO_2__ESAI1_FST 0x328 0x6b8 0x7d0 0x0 0x1
+#define MX53_PAD_GPIO_2__GPIO1_2 0x328 0x6b8 0x000 0x1 0x0
+#define MX53_PAD_GPIO_2__KPP_ROW_6 0x328 0x6b8 0x850 0x2 0x2
+#define MX53_PAD_GPIO_2__CCM_CCM_OUT_1 0x328 0x6b8 0x000 0x3 0x0
+#define MX53_PAD_GPIO_2__CSU_CSU_ALARM_AUT_0 0x328 0x6b8 0x000 0x4 0x0
+#define MX53_PAD_GPIO_2__OBSERVE_MUX_OBSRV_INT_OUT2 0x328 0x6b8 0x000 0x5 0x0
+#define MX53_PAD_GPIO_2__ESDHC2_WP 0x328 0x6b8 0x000 0x6 0x0
+#define MX53_PAD_GPIO_2__MLB_MLBDAT 0x328 0x6b8 0x85c 0x7 0x2
+#define MX53_PAD_GPIO_4__ESAI1_HCKT 0x32c 0x6bc 0x7d8 0x0 0x1
+#define MX53_PAD_GPIO_4__GPIO1_4 0x32c 0x6bc 0x000 0x1 0x0
+#define MX53_PAD_GPIO_4__KPP_COL_7 0x32c 0x6bc 0x848 0x2 0x2
+#define MX53_PAD_GPIO_4__CCM_CCM_OUT_2 0x32c 0x6bc 0x000 0x3 0x0
+#define MX53_PAD_GPIO_4__CSU_CSU_ALARM_AUT_1 0x32c 0x6bc 0x000 0x4 0x0
+#define MX53_PAD_GPIO_4__OBSERVE_MUX_OBSRV_INT_OUT3 0x32c 0x6bc 0x000 0x5 0x0
+#define MX53_PAD_GPIO_4__ESDHC2_CD 0x32c 0x6bc 0x000 0x6 0x0
+#define MX53_PAD_GPIO_4__SCC_SEC_STATE 0x32c 0x6bc 0x000 0x7 0x0
+#define MX53_PAD_GPIO_5__ESAI1_TX2_RX3 0x330 0x6c0 0x7ec 0x0 0x1
+#define MX53_PAD_GPIO_5__GPIO1_5 0x330 0x6c0 0x000 0x1 0x0
+#define MX53_PAD_GPIO_5__KPP_ROW_7 0x330 0x6c0 0x854 0x2 0x2
+#define MX53_PAD_GPIO_5__CCM_CLKO 0x330 0x6c0 0x000 0x3 0x0
+#define MX53_PAD_GPIO_5__CSU_CSU_ALARM_AUT_2 0x330 0x6c0 0x000 0x4 0x0
+#define MX53_PAD_GPIO_5__OBSERVE_MUX_OBSRV_INT_OUT4 0x330 0x6c0 0x000 0x5 0x0
+#define MX53_PAD_GPIO_5__I2C3_SCL 0x330 0x6c0 0x824 0x6 0x2
+#define MX53_PAD_GPIO_5__CCM_PLL1_BYP 0x330 0x6c0 0x770 0x7 0x1
+#define MX53_PAD_GPIO_7__ESAI1_TX4_RX1 0x334 0x6c4 0x7f4 0x0 0x1
+#define MX53_PAD_GPIO_7__GPIO1_7 0x334 0x6c4 0x000 0x1 0x0
+#define MX53_PAD_GPIO_7__EPIT1_EPITO 0x334 0x6c4 0x000 0x2 0x0
+#define MX53_PAD_GPIO_7__CAN1_TXCAN 0x334 0x6c4 0x000 0x3 0x0
+#define MX53_PAD_GPIO_7__UART2_TXD_MUX 0x334 0x6c4 0x000 0x4 0x0
+#define MX53_PAD_GPIO_7__FIRI_RXD 0x334 0x6c4 0x80c 0x5 0x1
+#define MX53_PAD_GPIO_7__SPDIF_PLOCK 0x334 0x6c4 0x000 0x6 0x0
+#define MX53_PAD_GPIO_7__CCM_PLL2_BYP 0x334 0x6c4 0x774 0x7 0x1
+#define MX53_PAD_GPIO_8__ESAI1_TX5_RX0 0x338 0x6c8 0x7f8 0x0 0x1
+#define MX53_PAD_GPIO_8__GPIO1_8 0x338 0x6c8 0x000 0x1 0x0
+#define MX53_PAD_GPIO_8__EPIT2_EPITO 0x338 0x6c8 0x000 0x2 0x0
+#define MX53_PAD_GPIO_8__CAN1_RXCAN 0x338 0x6c8 0x760 0x3 0x2
+#define MX53_PAD_GPIO_8__UART2_RXD_MUX 0x338 0x6c8 0x880 0x4 0x5
+#define MX53_PAD_GPIO_8__FIRI_TXD 0x338 0x6c8 0x000 0x5 0x0
+#define MX53_PAD_GPIO_8__SPDIF_SRCLK 0x338 0x6c8 0x000 0x6 0x0
+#define MX53_PAD_GPIO_8__CCM_PLL3_BYP 0x338 0x6c8 0x778 0x7 0x1
+#define MX53_PAD_GPIO_16__ESAI1_TX3_RX2 0x33c 0x6cc 0x7f0 0x0 0x1
+#define MX53_PAD_GPIO_16__GPIO7_11 0x33c 0x6cc 0x000 0x1 0x0
+#define MX53_PAD_GPIO_16__TZIC_PWRFAIL_INT 0x33c 0x6cc 0x000 0x2 0x0
+#define MX53_PAD_GPIO_16__RTC_CE_RTC_EXT_TRIG1 0x33c 0x6cc 0x000 0x4 0x0
+#define MX53_PAD_GPIO_16__SPDIF_IN1 0x33c 0x6cc 0x870 0x5 0x1
+#define MX53_PAD_GPIO_16__I2C3_SDA 0x33c 0x6cc 0x828 0x6 0x2
+#define MX53_PAD_GPIO_16__SJC_DE_B 0x33c 0x6cc 0x000 0x7 0x0
+#define MX53_PAD_GPIO_17__ESAI1_TX0 0x340 0x6d0 0x7e4 0x0 0x1
+#define MX53_PAD_GPIO_17__GPIO7_12 0x340 0x6d0 0x000 0x1 0x0
+#define MX53_PAD_GPIO_17__SDMA_EXT_EVENT_0 0x340 0x6d0 0x868 0x2 0x1
+#define MX53_PAD_GPIO_17__GPC_PMIC_RDY 0x340 0x6d0 0x810 0x3 0x1
+#define MX53_PAD_GPIO_17__RTC_CE_RTC_FSV_TRIG 0x340 0x6d0 0x000 0x4 0x0
+#define MX53_PAD_GPIO_17__SPDIF_OUT1 0x340 0x6d0 0x000 0x5 0x0
+#define MX53_PAD_GPIO_17__IPU_SNOOP2 0x340 0x6d0 0x000 0x6 0x0
+#define MX53_PAD_GPIO_17__SJC_JTAG_ACT 0x340 0x6d0 0x000 0x7 0x0
+#define MX53_PAD_GPIO_18__ESAI1_TX1 0x344 0x6d4 0x7e8 0x0 0x1
+#define MX53_PAD_GPIO_18__GPIO7_13 0x344 0x6d4 0x000 0x1 0x0
+#define MX53_PAD_GPIO_18__SDMA_EXT_EVENT_1 0x344 0x6d4 0x86c 0x2 0x1
+#define MX53_PAD_GPIO_18__OWIRE_LINE 0x344 0x6d4 0x864 0x3 0x1
+#define MX53_PAD_GPIO_18__RTC_CE_RTC_ALARM2_TRIG 0x344 0x6d4 0x000 0x4 0x0
+#define MX53_PAD_GPIO_18__CCM_ASRC_EXT_CLK 0x344 0x6d4 0x768 0x5 0x1
+#define MX53_PAD_GPIO_18__ESDHC1_LCTL 0x344 0x6d4 0x000 0x6 0x0
+#define MX53_PAD_GPIO_18__SRC_SYSTEM_RST 0x344 0x6d4 0x000 0x7 0x0
+
+#endif /* __DTS_IMX53_PINFUNC_H */
diff --git a/arch/arm/dts/imx53.dtsi b/arch/arm/dts/imx53.dtsi
new file mode 100644
index 0000000..1bdf066
--- /dev/null
+++ b/arch/arm/dts/imx53.dtsi
@@ -0,0 +1,110 @@
+/*
+ * Copyright 2016 Beckhoff Automation
+ * Copyright 2011 Freescale Semiconductor, Inc.
+ * Copyright 2011 Linaro Ltd.
+ *
+ * The code contained herein is licensed under the GNU General Public
+ * License. You may obtain a copy of the GNU General Public License
+ * Version 2 or later at the following locations:
+ *
+ * http://www.opensource.org/licenses/gpl-license.html
+ * http://www.gnu.org/copyleft/gpl.html
+ */
+
+#include "skeleton.dtsi"
+#include "imx53-pinfunc.h"
+#include <dt-bindings/clock/imx5-clock.h>
+#include <dt-bindings/gpio/gpio.h>
+#include <dt-bindings/input/input.h>
+#include <dt-bindings/interrupt-controller/irq.h>
+
+/ {
+ aliases {
+ serial1 = &uart2;
+ };
+
+ soc {
+ #address-cells = <1>;
+ #size-cells = <1>;
+ compatible = "simple-bus";
+ ranges;
+
+ aips@50000000 { /* AIPS1 */
+ compatible = "fsl,aips-bus", "simple-bus";
+ #address-cells = <1>;
+ #size-cells = <1>;
+ reg = <0x50000000 0x10000000>;
+ ranges;
+
+ iomuxc: iomuxc@53fa8000 {
+ compatible = "fsl,imx53-iomuxc";
+ reg = <0x53fa8000 0x4000>;
+ };
+
+ gpr: iomuxc-gpr@53fa8000 {
+ compatible = "fsl,imx53-iomuxc-gpr", "syscon";
+ reg = <0x53fa8000 0xc>;
+ };
+
+ uart2: serial@53fc0000 {
+ compatible = "fsl,imx7d-uart", "fsl,imx53-uart", "fsl,imx21-uart";
+ reg = <0x53fc0000 0x4000>;
+ interrupts = <32>;
+ clocks = <&clks IMX5_CLK_UART2_IPG_GATE>,
+ <&clks IMX5_CLK_UART2_PER_GATE>;
+ clock-names = "ipg", "per";
+ dmas = <&sdma 12 4 0>, <&sdma 13 4 0>;
+ dma-names = "rx", "tx";
+ status = "disabled";
+ };
+
+ clks: ccm@53fd4000{
+ compatible = "fsl,imx53-ccm";
+ reg = <0x53fd4000 0x4000>;
+ interrupts = <0 71 0x04 0 72 0x04>;
+ #clock-cells = <1>;
+ };
+
+ gpio7: gpio@53fe4000 {
+ compatible = "fsl,imx53-gpio", "fsl,imx35-gpio";
+ reg = <0x53fe4000 0x4000>;
+ interrupts = <107 108>;
+ gpio-controller;
+ #gpio-cells = <2>;
+ interrupt-controller;
+ #interrupt-cells = <2>;
+ };
+ };
+
+ aips@60000000 { /* AIPS2 */
+ compatible = "fsl,aips-bus", "simple-bus";
+ #address-cells = <1>;
+ #size-cells = <1>;
+ reg = <0x60000000 0x10000000>;
+ ranges;
+
+ sdma: sdma@63fb0000 {
+ compatible = "fsl,imx53-sdma", "fsl,imx35-sdma";
+ reg = <0x63fb0000 0x4000>;
+ interrupts = <6>;
+ clocks = <&clks IMX5_CLK_SDMA_GATE>,
+ <&clks IMX5_CLK_SDMA_GATE>;
+ clock-names = "ipg", "ahb";
+ #dma-cells = <3>;
+ fsl,sdma-ram-script-name = "imx/sdma/sdma-imx53.bin";
+ };
+
+
+ fec: ethernet@63fec000 {
+ compatible = "fsl,imx53-fec", "fsl,imx25-fec";
+ reg = <0x63fec000 0x4000>;
+ interrupts = <87>;
+ clocks = <&clks IMX5_CLK_FEC_GATE>,
+ <&clks IMX5_CLK_FEC_GATE>,
+ <&clks IMX5_CLK_FEC_GATE>;
+ clock-names = "ipg", "ahb", "ptp";
+ status = "disabled";
+ };
+ };
+ };
+};
diff --git a/arch/arm/dts/imx6dl-icore-rqs.dts b/arch/arm/dts/imx6dl-icore-rqs.dts
new file mode 100644
index 0000000..0f1de3f
--- /dev/null
+++ b/arch/arm/dts/imx6dl-icore-rqs.dts
@@ -0,0 +1,50 @@
+/*
+ * Copyright (C) 2015 Amarula Solutions B.V.
+ *
+ * This file is dual-licensed: you can use it either under the terms
+ * of the GPL or the X11 license, at your option. Note that this dual
+ * licensing only applies to this file, and not this project as a
+ * whole.
+ *
+ * a) This file is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License
+ * version 2 as published by the Free Software Foundation.
+ *
+ * This file is distributed in the hope that it will be useful
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * Or, alternatively
+ *
+ * b) Permission is hereby granted, free of charge, to any person
+ * obtaining a copy of this software and associated documentation
+ * files (the "Software"), to deal in the Software without
+ * restriction, including without limitation the rights to use
+ * copy, modify, merge, publish, distribute, sublicense, and/or
+ * sell copies of the Software, and to permit persons to whom the
+ * Software is furnished to do so, subject to the following
+ * conditions:
+ *
+ * The above copyright notice and this permission notice shall be
+ * included in all copies or substantial portions of the Software.
+ *
+ * THE SOFTWARE IS PROVIDED , WITHOUT WARRANTY OF ANY KIND
+ * EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES
+ * OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
+ * NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT
+ * HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY
+ * WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING
+ * FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR
+ * OTHER DEALINGS IN THE SOFTWARE.
+ */
+
+/dts-v1/;
+
+#include "imx6q.dtsi"
+#include "imx6qdl-icore-rqs.dtsi"
+
+/ {
+ model = "Engicam i.CoreM6 DualLite/Solo RQS Starter Kit";
+ compatible = "engicam,imx6-icore-rqs", "fsl,imx6q";
+};
diff --git a/arch/arm/dts/imx6q-icore-rqs.dts b/arch/arm/dts/imx6q-icore-rqs.dts
new file mode 100644
index 0000000..9fa6ba0
--- /dev/null
+++ b/arch/arm/dts/imx6q-icore-rqs.dts
@@ -0,0 +1,50 @@
+/*
+ * Copyright (C) 2015 Amarula Solutions B.V.
+ *
+ * This file is dual-licensed: you can use it either under the terms
+ * of the GPL or the X11 license, at your option. Note that this dual
+ * licensing only applies to this file, and not this project as a
+ * whole.
+ *
+ * a) This file is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License
+ * version 2 as published by the Free Software Foundation.
+ *
+ * This file is distributed in the hope that it will be useful
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * Or, alternatively
+ *
+ * b) Permission is hereby granted, free of charge, to any person
+ * obtaining a copy of this software and associated documentation
+ * files (the "Software"), to deal in the Software without
+ * restriction, including without limitation the rights to use
+ * copy, modify, merge, publish, distribute, sublicense, and/or
+ * sell copies of the Software, and to permit persons to whom the
+ * Software is furnished to do so, subject to the following
+ * conditions:
+ *
+ * The above copyright notice and this permission notice shall be
+ * included in all copies or substantial portions of the Software.
+ *
+ * THE SOFTWARE IS PROVIDED , WITHOUT WARRANTY OF ANY KIND
+ * EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES
+ * OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
+ * NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT
+ * HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY
+ * WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING
+ * FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR
+ * OTHER DEALINGS IN THE SOFTWARE.
+ */
+
+/dts-v1/;
+
+#include "imx6q.dtsi"
+#include "imx6qdl-icore-rqs.dtsi"
+
+/ {
+ model = "Engicam i.CoreM6 Quad/Dual RQS Starter Kit";
+ compatible = "engicam,imx6-icore-rqs", "fsl,imx6q";
+};
diff --git a/arch/arm/dts/imx6qdl-icore-rqs.dtsi b/arch/arm/dts/imx6qdl-icore-rqs.dtsi
new file mode 100644
index 0000000..750229b
--- /dev/null
+++ b/arch/arm/dts/imx6qdl-icore-rqs.dtsi
@@ -0,0 +1,170 @@
+/*
+ * Copyright (C) 2015 Amarula Solutions B.V.
+ *
+ * This file is dual-licensed: you can use it either under the terms
+ * of the GPL or the X11 license, at your option. Note that this dual
+ * licensing only applies to this file, and not this project as a
+ * whole.
+ *
+ * a) This file is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License
+ * version 2 as published by the Free Software Foundation.
+ *
+ * This file is distributed in the hope that it will be useful
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * Or, alternatively
+ *
+ * b) Permission is hereby granted, free of charge, to any person
+ * obtaining a copy of this software and associated documentation
+ * files (the "Software"), to deal in the Software without
+ * restriction, including without limitation the rights to use
+ * copy, modify, merge, publish, distribute, sublicense, and/or
+ * sell copies of the Software, and to permit persons to whom the
+ * Software is furnished to do so, subject to the following
+ * conditions:
+ *
+ * The above copyright notice and this permission notice shall be
+ * included in all copies or substantial portions of the Software.
+ *
+ * THE SOFTWARE IS PROVIDED , WITHOUT WARRANTY OF ANY KIND
+ * EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES
+ * OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
+ * NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT
+ * HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY
+ * WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING
+ * FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR
+ * OTHER DEALINGS IN THE SOFTWARE.
+ */
+
+#include <dt-bindings/gpio/gpio.h>
+#include <dt-bindings/clock/imx6qdl-clock.h>
+
+/ {
+ memory {
+ reg = <0x10000000 0x80000000>;
+ };
+};
+
+&fec {
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_enet>;
+ phy-handle = <ð_phy>;
+ phy-mode = "rgmii";
+ status = "okay";
+
+ mdio {
+ eth_phy: ethernet-phy {
+ rxc-skew-ps = <1140>;
+ txc-skew-ps = <1140>;
+ txen-skew-ps = <600>;
+ rxdv-skew-ps = <240>;
+ rxd0-skew-ps = <420>;
+ rxd1-skew-ps = <600>;
+ rxd2-skew-ps = <420>;
+ rxd3-skew-ps = <240>;
+ txd0-skew-ps = <60>;
+ txd1-skew-ps = <60>;
+ txd2-skew-ps = <60>;
+ txd3-skew-ps = <240>;
+ };
+ };
+};
+
+&i2c1 {
+ clock-frequency = <100000>;
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_i2c1>;
+ status = "okay";
+};
+
+&i2c2 {
+ clock-frequency = <100000>;
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_i2c2>;
+ status = "okay";
+};
+
+&i2c3 {
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_i2c3>;
+ status = "okay";
+};
+
+&uart4 {
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_uart4>;
+ status = "okay";
+};
+
+&usdhc3 {
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_usdhc3>;
+ cd-gpios = <&gpio1 1 GPIO_ACTIVE_LOW>;
+ no-1-8-v;
+ status = "okay";
+};
+
+&iomuxc {
+ pinctrl_enet: enetgrp {
+ fsl,pins = <
+ MX6QDL_PAD_ENET_MDIO__ENET_MDIO 0x1b0b0
+ MX6QDL_PAD_ENET_MDC__ENET_MDC 0x1b0b0
+ MX6QDL_PAD_RGMII_TXC__RGMII_TXC 0x1b030
+ MX6QDL_PAD_RGMII_TD0__RGMII_TD0 0x1b030
+ MX6QDL_PAD_RGMII_TD1__RGMII_TD1 0x1b030
+ MX6QDL_PAD_RGMII_TD2__RGMII_TD2 0x1b030
+ MX6QDL_PAD_RGMII_TD3__RGMII_TD3 0x1b030
+ MX6QDL_PAD_RGMII_TX_CTL__RGMII_TX_CTL 0x1b030
+ MX6QDL_PAD_ENET_REF_CLK__ENET_TX_CLK 0x1b0b0
+ MX6QDL_PAD_RGMII_RXC__RGMII_RXC 0x1b030
+ MX6QDL_PAD_RGMII_RD0__RGMII_RD0 0x1b030
+ MX6QDL_PAD_RGMII_RD1__RGMII_RD1 0x1b030
+ MX6QDL_PAD_RGMII_RD2__RGMII_RD2 0x1b030
+ MX6QDL_PAD_RGMII_RD3__RGMII_RD3 0x1b030
+ MX6QDL_PAD_RGMII_RX_CTL__RGMII_RX_CTL 0x1b030
+ MX6QDL_PAD_ENET_TX_EN__ENET_TX_EN 0x1b0b0
+ >;
+ };
+
+ pinctrl_i2c1: i2c1grp {
+ fsl,pins = <
+ MX6QDL_PAD_EIM_D21__I2C1_SCL 0x4001b8b1
+ MX6QDL_PAD_EIM_D28__I2C1_SDA 0x4001b8b1
+ >;
+ };
+
+ pinctrl_i2c2: i2c2grp {
+ fsl,pins = <
+ MX6QDL_PAD_KEY_COL3__I2C2_SCL 0x4001b8b1
+ MX6QDL_PAD_KEY_ROW3__I2C2_SDA 0x4001b8b1
+ >;
+ };
+
+ pinctrl_i2c3: i2c3grp {
+ fsl,pins = <
+ MX6QDL_PAD_GPIO_5__I2C3_SCL 0x4001b8b1
+ MX6QDL_PAD_EIM_D18__I2C3_SDA 0x4001b8b1
+ >;
+ };
+
+ pinctrl_uart4: uart4grp {
+ fsl,pins = <
+ MX6QDL_PAD_KEY_COL0__UART4_TX_DATA 0x1b0b1
+ MX6QDL_PAD_KEY_ROW0__UART4_RX_DATA 0x1b0b1
+ >;
+ };
+
+ pinctrl_usdhc3: usdhc3grp {
+ fsl,pins = <
+ MX6QDL_PAD_SD3_CMD__SD3_CMD 0x17070
+ MX6QDL_PAD_SD3_CLK__SD3_CLK 0x10070
+ MX6QDL_PAD_SD3_DAT0__SD3_DATA0 0x17070
+ MX6QDL_PAD_SD3_DAT1__SD3_DATA1 0x17070
+ MX6QDL_PAD_SD3_DAT2__SD3_DATA2 0x17070
+ MX6QDL_PAD_SD3_DAT3__SD3_DATA3 0x17070
+ >;
+ };
+};
diff --git a/arch/arm/dts/imx6qdl-icore.dtsi b/arch/arm/dts/imx6qdl-icore.dtsi
index f424cd5..a485c3e 100644
--- a/arch/arm/dts/imx6qdl-icore.dtsi
+++ b/arch/arm/dts/imx6qdl-icore.dtsi
@@ -75,6 +75,14 @@
assigned-clock-parents = <&clks IMX6QDL_CLK_OSC>;
};
+&fec {
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_enet>;
+ phy-reset-gpios = <&gpio7 12 GPIO_ACTIVE_LOW>;
+ phy-mode = "rmii";
+ status = "okay";
+};
+
&gpmi {
pinctrl-names = "default";
pinctrl-0 = <&pinctrl_gpmi_nand>;
@@ -118,6 +126,22 @@
};
&iomuxc {
+ pinctrl_enet: enetgrp {
+ fsl,pins = <
+ MX6QDL_PAD_ENET_CRS_DV__ENET_RX_EN 0x1b0b0
+ MX6QDL_PAD_GPIO_16__ENET_REF_CLK 0x1b0b1
+ MX6QDL_PAD_ENET_TX_EN__ENET_TX_EN 0x1b0b0
+ MX6QDL_PAD_ENET_RXD1__ENET_RX_DATA1 0x1b0b0
+ MX6QDL_PAD_ENET_RXD0__ENET_RX_DATA0 0x1b0b0
+ MX6QDL_PAD_ENET_TXD1__ENET_TX_DATA1 0x1b0b0
+ MX6QDL_PAD_ENET_TXD0__ENET_TX_DATA0 0x1b0b0
+ MX6QDL_PAD_ENET_MDC__ENET_MDC 0x1b0b0
+ MX6QDL_PAD_ENET_MDIO__ENET_MDIO 0x1b0b0
+ MX6QDL_PAD_ENET_REF_CLK__GPIO1_IO23 0x1b0b0
+ MX6QDL_PAD_GPIO_17__GPIO7_IO12 0x1b0b0
+ >;
+ };
+
pinctrl_flexcan1: flexcan1grp {
fsl,pins = <
MX6QDL_PAD_KEY_ROW2__FLEXCAN1_RX 0x1b020
diff --git a/arch/arm/dts/imx6sll-evk.dts b/arch/arm/dts/imx6sll-evk.dts
new file mode 100644
index 0000000..b4af007
--- /dev/null
+++ b/arch/arm/dts/imx6sll-evk.dts
@@ -0,0 +1,801 @@
+/*
+ * Copyright (C) 2016 Freescale Semiconductor, Inc.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+
+/dts-v1/;
+
+#include <dt-bindings/gpio/gpio.h>
+#include <dt-bindings/input/input.h>
+#include "imx6sll.dtsi"
+
+/ {
+ model = "Freescale i.MX6SLL EVK Board";
+ compatible = "fsl,imx6sll-evk", "fsl,imx6sll";
+
+ memory {
+ reg = <0x80000000 0x80000000>;
+ };
+
+ backlight {
+ compatible = "pwm-backlight";
+ pwms = <&pwm1 0 5000000>;
+ brightness-levels = <0 4 8 16 32 64 128 255>;
+ default-brightness-level = <6>;
+ status = "okay";
+ };
+
+ battery: max8903@0 {
+ compatible = "fsl,max8903-charger";
+ pinctrl-names = "default";
+ dok_input = <&gpio4 13 1>;
+ uok_input = <&gpio4 13 1>;
+ chg_input = <&gpio4 15 1>;
+ flt_input = <&gpio4 14 1>;
+ fsl,dcm_always_high;
+ fsl,dc_valid;
+ fsl,adc_disable;
+ status = "okay";
+ };
+
+ pxp_v4l2_out {
+ compatible = "fsl,imx6sl-pxp-v4l2";
+ status = "okay";
+ };
+
+ regulators {
+ compatible = "simple-bus";
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ reg_usb_otg1_vbus: regulator@0 {
+ compatible = "regulator-fixed";
+ reg = <0>;
+ regulator-name = "usb_otg1_vbus";
+ regulator-min-microvolt = <5000000>;
+ regulator-max-microvolt = <5000000>;
+ gpio = <&gpio4 0 GPIO_ACTIVE_HIGH>;
+ enable-active-high;
+ };
+
+ reg_usb_otg2_vbus: regulator@1 {
+ compatible = "regulator-fixed";
+ reg = <1>;
+ regulator-name = "usb_otg2_vbus";
+ regulator-min-microvolt = <5000000>;
+ regulator-max-microvolt = <5000000>;
+ gpio = <&gpio4 2 GPIO_ACTIVE_HIGH>;
+ enable-active-high;
+ };
+
+ reg_aud3v: regulator@2 {
+ compatible = "regulator-fixed";
+ reg = <2>;
+ regulator-name = "wm8962-supply-3v15";
+ regulator-min-microvolt = <3150000>;
+ regulator-max-microvolt = <3150000>;
+ regulator-boot-on;
+ };
+
+ reg_aud4v: regulator@3 {
+ compatible = "regulator-fixed";
+ reg = <3>;
+ regulator-name = "wm8962-supply-4v2";
+ regulator-min-microvolt = <4325000>;
+ regulator-max-microvolt = <4325000>;
+ regulator-boot-on;
+ };
+
+ reg_lcd: regulator@4 {
+ compatible = "regulator-fixed";
+ reg = <4>;
+ regulator-name = "lcd-pwr";
+ gpio = <&gpio4 8 0>;
+ enable-active-high;
+ };
+
+ reg_sd1_vmmc: sd1_vmmc {
+ compatible = "regulator-fixed";
+ regulator-name = "SD1_SPWR";
+ regulator-min-microvolt = <3000000>;
+ regulator-max-microvolt = <3000000>;
+ gpio = <&gpio3 30 GPIO_ACTIVE_HIGH>;
+ enable-active-high;
+ };
+
+ reg_sd2_vmmc: sd2_vmmc {
+ compatible = "regulator-fixed";
+ regulator-name = "eMMC-VCCQ";
+ regulator-min-microvolt = <1800000>;
+ regulator-max-microvolt = <1800000>;
+ regulator-boot-on;
+ };
+
+ reg_sd3_vmmc: sd3_vmmc {
+ compatible = "regulator-fixed";
+ regulator-name = "SD3_WIFI";
+ regulator-min-microvolt = <3000000>;
+ regulator-max-microvolt = <3000000>;
+ gpio = <&gpio4 4 GPIO_ACTIVE_HIGH>;
+ enable-active-high;
+ };
+
+ };
+
+ sound {
+ compatible = "fsl,imx6sl-evk-wm8962", "fsl,imx-audio-wm8962";
+ model = "wm8962-audio";
+ cpu-dai = <&ssi2>;
+ audio-codec = <&codec>;
+ audio-routing =
+ "Headphone Jack", "HPOUTL",
+ "Headphone Jack", "HPOUTR",
+ "Ext Spk", "SPKOUTL",
+ "Ext Spk", "SPKOUTR",
+ "AMIC", "MICBIAS",
+ "IN3R", "AMIC";
+ mux-int-port = <2>;
+ mux-ext-port = <3>;
+ codec-master;
+ hp-det-gpios = <&gpio4 24 1>;
+ };
+};
+
+&audmux {
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_audmux3>;
+ status = "okay";
+};
+
+&clks {
+ assigned-clocks = <&clks IMX6SLL_CLK_PLL4_AUDIO_DIV>;
+ assigned-clock-rates = <393216000>;
+};
+
+&cpu0 {
+ arm-supply = <&sw1a_reg>;
+ soc-supply = <&sw1c_reg>;
+};
+
+&i2c1 {
+ clock-frequency = <100000>;
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_i2c1>;
+ status = "okay";
+
+ pmic: pfuze100@08 {
+ compatible = "fsl,pfuze100";
+ reg = <0x08>;
+
+ regulators {
+ sw1a_reg: sw1ab {
+ regulator-min-microvolt = <300000>;
+ regulator-max-microvolt = <1875000>;
+ regulator-boot-on;
+ regulator-always-on;
+ regulator-ramp-delay = <6250>;
+ };
+
+ sw1c_reg: sw1c {
+ regulator-min-microvolt = <300000>;
+ regulator-max-microvolt = <1875000>;
+ regulator-boot-on;
+ regulator-always-on;
+ regulator-ramp-delay = <6250>;
+ };
+
+ sw2_reg: sw2 {
+ regulator-min-microvolt = <800000>;
+ regulator-max-microvolt = <3300000>;
+ regulator-boot-on;
+ regulator-always-on;
+ };
+
+ sw3a_reg: sw3a {
+ regulator-min-microvolt = <400000>;
+ regulator-max-microvolt = <1975000>;
+ regulator-boot-on;
+ regulator-always-on;
+ };
+
+ sw3b_reg: sw3b {
+ regulator-min-microvolt = <400000>;
+ regulator-max-microvolt = <1975000>;
+ regulator-boot-on;
+ regulator-always-on;
+ };
+
+ sw4_reg: sw4 {
+ regulator-min-microvolt = <800000>;
+ regulator-max-microvolt = <3300000>;
+ };
+
+ swbst_reg: swbst {
+ regulator-min-microvolt = <5000000>;
+ regulator-max-microvolt = <5150000>;
+ };
+
+ snvs_reg: vsnvs {
+ regulator-min-microvolt = <1000000>;
+ regulator-max-microvolt = <3000000>;
+ regulator-boot-on;
+ regulator-always-on;
+ };
+
+ vref_reg: vrefddr {
+ regulator-boot-on;
+ regulator-always-on;
+ };
+
+ vgen1_reg: vgen1 {
+ regulator-min-microvolt = <800000>;
+ regulator-max-microvolt = <1550000>;
+ regulator-always-on;
+ };
+
+ vgen2_reg: vgen2 {
+ regulator-min-microvolt = <800000>;
+ regulator-max-microvolt = <1550000>;
+ };
+
+ vgen3_reg: vgen3 {
+ regulator-min-microvolt = <1800000>;
+ regulator-max-microvolt = <3300000>;
+ };
+
+ vgen4_reg: vgen4 {
+ regulator-min-microvolt = <1800000>;
+ regulator-max-microvolt = <3300000>;
+ regulator-always-on;
+ };
+
+ vgen5_reg: vgen5 {
+ regulator-min-microvolt = <1800000>;
+ regulator-max-microvolt = <3300000>;
+ regulator-always-on;
+ };
+
+ vgen6_reg: vgen6 {
+ regulator-min-microvolt = <1800000>;
+ regulator-max-microvolt = <3300000>;
+ regulator-always-on;
+ };
+ };
+ };
+
+ max17135: max17135@48 {
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_max17135>;
+ compatible = "maxim,max17135";
+ reg = <0x48>;
+ status = "okay";
+
+ vneg_pwrup = <1>;
+ gvee_pwrup = <2>;
+ vpos_pwrup = <10>;
+ gvdd_pwrup = <12>;
+ gvdd_pwrdn = <1>;
+ vpos_pwrdn = <2>;
+ gvee_pwrdn = <8>;
+ vneg_pwrdn = <10>;
+ gpio_pmic_pwrgood = <&gpio2 13 0>;
+ gpio_pmic_vcom_ctrl = <&gpio2 3 0>;
+ gpio_pmic_wakeup = <&gpio2 14 0>;
+ gpio_pmic_v3p3 = <&gpio2 7 0>;
+ gpio_pmic_intr = <&gpio2 12 0>;
+
+ regulators {
+ DISPLAY_reg: DISPLAY {
+ regulator-name = "DISPLAY";
+ };
+
+ GVDD_reg: GVDD {
+ /* 20v */
+ regulator-name = "GVDD";
+ };
+
+ GVEE_reg: GVEE {
+ /* -22v */
+ regulator-name = "GVEE";
+ };
+
+ HVINN_reg: HVINN {
+ /* -22v */
+ regulator-name = "HVINN";
+ };
+
+ HVINP_reg: HVINP {
+ /* 20v */
+ regulator-name = "HVINP";
+ };
+
+ VCOM_reg: VCOM {
+ regulator-name = "VCOM";
+ /* 2's-compliment, -4325000 */
+ regulator-min-microvolt = <0xffbe0178>;
+ /* 2's-compliment, -500000 */
+ regulator-max-microvolt = <0xfff85ee0>;
+ };
+
+ VNEG_reg: VNEG {
+ /* -15v */
+ regulator-name = "VNEG";
+ };
+
+ VPOS_reg: VPOS {
+ /* 15v */
+ regulator-name = "VPOS";
+ };
+
+ V3P3_reg: V3P3 {
+ regulator-name = "V3P3";
+ };
+ };
+ };
+};
+
+&i2c3 {
+ clock-frequency = <100000>;
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_i2c3>;
+ status = "okay";
+
+ codec: wm8962@1a {
+ compatible = "wlf,wm8962";
+ reg = <0x1a>;
+ clocks = <&clks IMX6SLL_CLK_EXTERN_AUDIO>;
+ DCVDD-supply = <&vgen3_reg>;
+ DBVDD-supply = <®_aud3v>;
+ AVDD-supply = <&vgen3_reg>;
+ CPVDD-supply = <&vgen3_reg>;
+ MICVDD-supply = <®_aud3v>;
+ PLLVDD-supply = <&vgen3_reg>;
+ SPKVDD1-supply = <®_aud4v>;
+ SPKVDD2-supply = <®_aud4v>;
+ amic-mono;
+ };
+};
+
+&gpc {
+ fsl,ldo-bypass = <1>;
+};
+
+&iomuxc {
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_hog>;
+
+ imx6sll-evk {
+ pinctrl_hog: hoggrp {
+ fsl,pins = <
+ MX6SLL_PAD_KEY_ROW7__GPIO4_IO07 0x17059
+ MX6SLL_PAD_GPIO4_IO22__GPIO4_IO22 0x17059
+ MX6SLL_PAD_KEY_COL3__GPIO3_IO30 0x17059
+ /*
+ * Must set the LVE of pad SD2_RESET, otherwise current
+ * leakage through eMMC chip will pull high the VCCQ to
+ * 2.6v, which will impact SD1 and SD3 SD3.0 voltage switch.
+ */
+ MX6SLL_PAD_SD2_RESET__GPIO4_IO27 0x417059
+ MX6SLL_PAD_KEY_COL4__GPIO4_IO00 0x17059
+ MX6SLL_PAD_REF_CLK_32K__GPIO3_IO22 0x17059 /* SD3 CD */
+ MX6SLL_PAD_KEY_COL6__GPIO4_IO04 0x17059 /*SD3 RESET */
+ MX6SLL_PAD_KEY_COL5__GPIO4_IO02 0x17059
+ MX6SLL_PAD_GPIO4_IO24__GPIO4_IO24 0x17059 /* HP DETECT */
+ /* CHG_FLT, CHG_UOK/DOK, CHG_STATUS */
+ MX6SLL_PAD_ECSPI2_MISO__GPIO4_IO14 0x17000
+ MX6SLL_PAD_ECSPI2_MOSI__GPIO4_IO13 0x17000
+ MX6SLL_PAD_ECSPI2_SS0__GPIO4_IO15 0x17000
+ >;
+ };
+
+ pinctrl_audmux3: audmux3grp {
+ fsl,pins = <
+ MX6SLL_PAD_AUD_TXC__AUD3_TXC 0x4130b0
+ MX6SLL_PAD_AUD_TXFS__AUD3_TXFS 0x4130b0
+ MX6SLL_PAD_AUD_TXD__AUD3_TXD 0x4110b0
+ MX6SLL_PAD_AUD_RXD__AUD3_RXD 0x4130b0
+ MX6SLL_PAD_AUD_MCLK__AUDIO_CLK_OUT 0x4130b0
+ >;
+ };
+
+ pinctrl_csi1: csi1grp {
+ fsl,pins = <
+ MX6SLL_PAD_EPDC_GDRL__CSI_MCLK 0x1b088
+ MX6SLL_PAD_EPDC_GDCLK__CSI_PIXCLK 0x1b088
+ MX6SLL_PAD_EPDC_GDSP__CSI_VSYNC 0x1b088
+ MX6SLL_PAD_EPDC_GDOE__CSI_HSYNC 0x1b088
+ MX6SLL_PAD_EPDC_DATA02__CSI_DATA02 0x1b088
+ MX6SLL_PAD_EPDC_DATA03__CSI_DATA03 0x1b088
+ MX6SLL_PAD_EPDC_DATA04__CSI_DATA04 0x1b088
+ MX6SLL_PAD_EPDC_DATA05__CSI_DATA05 0x1b088
+ MX6SLL_PAD_EPDC_DATA06__CSI_DATA06 0x1b088
+ MX6SLL_PAD_EPDC_DATA07__CSI_DATA07 0x1b088
+ MX6SLL_PAD_EPDC_SDCLK__CSI_DATA08 0x1b088
+ MX6SLL_PAD_EPDC_SDLE__CSI_DATA09 0x1b088
+ MX6SLL_PAD_EPDC_SDSHR__GPIO1_IO26 0x80000000
+ MX6SLL_PAD_EPDC_SDOE__GPIO1_IO25 0x80000000
+ >;
+ };
+
+ pinctrl_epdc0: epdcgrp0 {
+ fsl,pins = <
+ MX6SLL_PAD_EPDC_DATA00__EPDC_DATA00 0x100b1
+ MX6SLL_PAD_EPDC_DATA01__EPDC_DATA01 0x100b1
+ MX6SLL_PAD_EPDC_DATA02__EPDC_DATA02 0x100b1
+ MX6SLL_PAD_EPDC_DATA03__EPDC_DATA03 0x100b1
+ MX6SLL_PAD_EPDC_DATA04__EPDC_DATA04 0x100b1
+ MX6SLL_PAD_EPDC_DATA05__EPDC_DATA05 0x100b1
+ MX6SLL_PAD_EPDC_DATA06__EPDC_DATA06 0x100b1
+ MX6SLL_PAD_EPDC_DATA07__EPDC_DATA07 0x100b1
+ MX6SLL_PAD_EPDC_DATA08__EPDC_DATA08 0x100b1
+ MX6SLL_PAD_EPDC_DATA09__EPDC_DATA09 0x100b1
+ MX6SLL_PAD_EPDC_DATA10__EPDC_DATA10 0x100b1
+ MX6SLL_PAD_EPDC_DATA11__EPDC_DATA11 0x100b1
+ MX6SLL_PAD_EPDC_DATA12__EPDC_DATA12 0x100b1
+ MX6SLL_PAD_EPDC_DATA13__EPDC_DATA13 0x100b1
+ MX6SLL_PAD_EPDC_DATA14__EPDC_DATA14 0x100b1
+ MX6SLL_PAD_EPDC_DATA15__EPDC_DATA15 0x100b1
+ MX6SLL_PAD_EPDC_SDCLK__EPDC_SDCLK_P 0x100b1
+ MX6SLL_PAD_EPDC_SDLE__EPDC_SDLE 0x100b1
+ MX6SLL_PAD_EPDC_SDOE__EPDC_SDOE 0x100b1
+ MX6SLL_PAD_EPDC_SDSHR__EPDC_SDSHR 0x100b1
+ MX6SLL_PAD_EPDC_SDCE0__EPDC_SDCE0 0x100b1
+ MX6SLL_PAD_EPDC_GDCLK__EPDC_GDCLK 0x100b1
+ MX6SLL_PAD_EPDC_GDOE__EPDC_GDOE 0x100b1
+ MX6SLL_PAD_EPDC_GDRL__EPDC_GDRL 0x100b1
+ MX6SLL_PAD_EPDC_GDSP__EPDC_GDSP 0x100b1
+ >;
+ };
+
+ pinctrl_lcdif_dat: lcdifdatgrp {
+ fsl,pins = <
+ MX6SLL_PAD_LCD_DATA00__LCD_DATA00 0x79
+ MX6SLL_PAD_LCD_DATA01__LCD_DATA01 0x79
+ MX6SLL_PAD_LCD_DATA02__LCD_DATA02 0x79
+ MX6SLL_PAD_LCD_DATA03__LCD_DATA03 0x79
+ MX6SLL_PAD_LCD_DATA04__LCD_DATA04 0x79
+ MX6SLL_PAD_LCD_DATA05__LCD_DATA05 0x79
+ MX6SLL_PAD_LCD_DATA06__LCD_DATA06 0x79
+ MX6SLL_PAD_LCD_DATA07__LCD_DATA07 0x79
+ MX6SLL_PAD_LCD_DATA08__LCD_DATA08 0x79
+ MX6SLL_PAD_LCD_DATA09__LCD_DATA09 0x79
+ MX6SLL_PAD_LCD_DATA10__LCD_DATA10 0x79
+ MX6SLL_PAD_LCD_DATA11__LCD_DATA11 0x79
+ MX6SLL_PAD_LCD_DATA12__LCD_DATA12 0x79
+ MX6SLL_PAD_LCD_DATA13__LCD_DATA13 0x79
+ MX6SLL_PAD_LCD_DATA14__LCD_DATA14 0x79
+ MX6SLL_PAD_LCD_DATA15__LCD_DATA15 0x79
+ MX6SLL_PAD_LCD_DATA16__LCD_DATA16 0x79
+ MX6SLL_PAD_LCD_DATA17__LCD_DATA17 0x79
+ MX6SLL_PAD_LCD_DATA18__LCD_DATA18 0x79
+ MX6SLL_PAD_LCD_DATA19__LCD_DATA19 0x79
+ MX6SLL_PAD_LCD_DATA20__LCD_DATA20 0x79
+ MX6SLL_PAD_LCD_DATA21__LCD_DATA21 0x79
+ MX6SLL_PAD_LCD_DATA22__LCD_DATA22 0x79
+ MX6SLL_PAD_LCD_DATA23__LCD_DATA23 0x79
+ >;
+ };
+
+ pinctrl_lcdif_ctrl: lcdifctrlgrp {
+ fsl,pins = <
+ MX6SLL_PAD_LCD_CLK__LCD_CLK 0x79
+ MX6SLL_PAD_LCD_ENABLE__LCD_ENABLE 0x79
+ MX6SLL_PAD_LCD_HSYNC__LCD_HSYNC 0x79
+ MX6SLL_PAD_LCD_VSYNC__LCD_VSYNC 0x79
+ MX6SLL_PAD_LCD_RESET__LCD_RESET 0x79
+ MX6SLL_PAD_ECSPI1_SCLK__GPIO4_IO08 0x79
+ >;
+ };
+
+ pinctrl_max17135: max17135grp-1 {
+ fsl,pins = <
+ MX6SLL_PAD_EPDC_PWR_STAT__GPIO2_IO13 0x80000000 /* pwrgood */
+ MX6SLL_PAD_EPDC_VCOM0__GPIO2_IO03 0x80000000 /* vcom_ctrl */
+ MX6SLL_PAD_EPDC_PWR_WAKE__GPIO2_IO14 0x80000000 /* wakeup */
+ MX6SLL_PAD_EPDC_PWR_CTRL0__GPIO2_IO07 0x80000000 /* v3p3 */
+ MX6SLL_PAD_EPDC_PWR_IRQ__GPIO2_IO12 0x80000000 /* pwr int */
+ >;
+ };
+
+ pinctrl_spdif: spdifgrp {
+ fsl,pins = <
+ MX6SLL_PAD_SD2_DATA4__SPDIF_OUT 0x4130b0
+ >;
+ };
+
+ pinctrl_uart1: uart1grp {
+ fsl,pins = <
+ MX6SLL_PAD_UART1_TXD__UART1_DCE_TX 0x1b0b1
+ MX6SLL_PAD_UART1_RXD__UART1_DCE_RX 0x1b0b1
+ >;
+ };
+
+ pinctrl_uart5: uart5grp {
+ fsl,pins = <
+ MX6SLL_PAD_KEY_ROW1__GPIO3_IO27 0x1b0b1 /* bt reg on */
+ MX6SLL_PAD_ECSPI1_MOSI__UART5_DCE_TX 0x1b0b1
+ MX6SLL_PAD_ECSPI1_SCLK__UART5_DCE_RX 0x1b0b1
+ MX6SLL_PAD_ECSPI1_SS0__UART5_DCE_CTS 0x1b0b1
+ MX6SLL_PAD_ECSPI1_MISO__UART5_DCE_RTS 0x1b0b1
+ >;
+ };
+
+ pinctrl_uart5dte: uart5dtegrp {
+ fsl,pins = <
+ MX6SLL_PAD_ECSPI1_MOSI__UART5_DTE_RX 0x1b0b1
+ MX6SLL_PAD_ECSPI1_SCLK__UART5_DTE_TX 0x1b0b1
+ MX6SLL_PAD_ECSPI1_SS0__UART5_DTE_RTS 0x1b0b1
+ MX6SLL_PAD_ECSPI1_MISO__UART5_DTE_CTS 0x1b0b1
+ >;
+ };
+
+ pinctrl_usdhc1: usdhc1grp {
+ fsl,pins = <
+ MX6SLL_PAD_SD1_CMD__SD1_CMD 0x17059
+ MX6SLL_PAD_SD1_CLK__SD1_CLK 0x13059
+ MX6SLL_PAD_SD1_DATA0__SD1_DATA0 0x17059
+ MX6SLL_PAD_SD1_DATA1__SD1_DATA1 0x17059
+ MX6SLL_PAD_SD1_DATA2__SD1_DATA2 0x17059
+ MX6SLL_PAD_SD1_DATA3__SD1_DATA3 0x17059
+ >;
+ };
+
+ pinctrl_usdhc1_100mhz: usdhc1grp_100mhz {
+ fsl,pins = <
+ MX6SLL_PAD_SD1_CMD__SD1_CMD 0x170b9
+ MX6SLL_PAD_SD1_CLK__SD1_CLK 0x130b9
+ MX6SLL_PAD_SD1_DATA0__SD1_DATA0 0x170b9
+ MX6SLL_PAD_SD1_DATA1__SD1_DATA1 0x170b9
+ MX6SLL_PAD_SD1_DATA2__SD1_DATA2 0x170b9
+ MX6SLL_PAD_SD1_DATA3__SD1_DATA3 0x170b9
+ >;
+ };
+
+ pinctrl_usdhc1_200mhz: usdhc1grp_200mhz {
+ fsl,pins = <
+ MX6SLL_PAD_SD1_CMD__SD1_CMD 0x170f9
+ MX6SLL_PAD_SD1_CLK__SD1_CLK 0x130f9
+ MX6SLL_PAD_SD1_DATA0__SD1_DATA0 0x170f9
+ MX6SLL_PAD_SD1_DATA1__SD1_DATA1 0x170f9
+ MX6SLL_PAD_SD1_DATA2__SD1_DATA2 0x170f9
+ MX6SLL_PAD_SD1_DATA3__SD1_DATA3 0x170f9
+ >;
+ };
+
+ pinctrl_usdhc2: usdhc2grp {
+ fsl,pins = <
+ MX6SLL_PAD_SD2_CMD__SD2_CMD 0x17059
+ MX6SLL_PAD_SD2_CLK__SD2_CLK 0x13059
+ MX6SLL_PAD_SD2_DATA0__SD2_DATA0 0x17059
+ MX6SLL_PAD_SD2_DATA1__SD2_DATA1 0x17059
+ MX6SLL_PAD_SD2_DATA2__SD2_DATA2 0x17059
+ MX6SLL_PAD_SD2_DATA3__SD2_DATA3 0x17059
+ MX6SLL_PAD_SD2_DATA4__SD2_DATA4 0x17059
+ MX6SLL_PAD_SD2_DATA5__SD2_DATA5 0x17059
+ MX6SLL_PAD_SD2_DATA6__SD2_DATA6 0x17059
+ MX6SLL_PAD_SD2_DATA7__SD2_DATA7 0x17059
+ MX6SLL_PAD_GPIO4_IO21__SD2_STROBE 0x413059
+ >;
+ };
+
+ pinctrl_usdhc2_100mhz: usdhc2grp_100mhz {
+ fsl,pins = <
+ MX6SLL_PAD_SD2_CMD__SD2_CMD 0x170b9
+ MX6SLL_PAD_SD2_CLK__SD2_CLK 0x130b9
+ MX6SLL_PAD_SD2_DATA0__SD2_DATA0 0x170b9
+ MX6SLL_PAD_SD2_DATA1__SD2_DATA1 0x170b9
+ MX6SLL_PAD_SD2_DATA2__SD2_DATA2 0x170b9
+ MX6SLL_PAD_SD2_DATA3__SD2_DATA3 0x170b9
+ MX6SLL_PAD_SD2_DATA4__SD2_DATA4 0x170b9
+ MX6SLL_PAD_SD2_DATA5__SD2_DATA5 0x170b9
+ MX6SLL_PAD_SD2_DATA6__SD2_DATA6 0x170b9
+ MX6SLL_PAD_SD2_DATA7__SD2_DATA7 0x170b9
+ MX6SLL_PAD_GPIO4_IO21__SD2_STROBE 0x4130b9
+ >;
+ };
+
+ pinctrl_usdhc2_200mhz: usdhc2grp_200mhz {
+ fsl,pins = <
+ MX6SLL_PAD_SD2_CMD__SD2_CMD 0x170f9
+ MX6SLL_PAD_SD2_CLK__SD2_CLK 0x130f9
+ MX6SLL_PAD_SD2_DATA0__SD2_DATA0 0x170f9
+ MX6SLL_PAD_SD2_DATA1__SD2_DATA1 0x170f9
+ MX6SLL_PAD_SD2_DATA2__SD2_DATA2 0x170f9
+ MX6SLL_PAD_SD2_DATA3__SD2_DATA3 0x170f9
+ MX6SLL_PAD_SD2_DATA4__SD2_DATA4 0x170f9
+ MX6SLL_PAD_SD2_DATA5__SD2_DATA5 0x170f9
+ MX6SLL_PAD_SD2_DATA6__SD2_DATA6 0x170f9
+ MX6SLL_PAD_SD2_DATA7__SD2_DATA7 0x170f9
+ MX6SLL_PAD_GPIO4_IO21__SD2_STROBE 0x4130f9
+ >;
+ };
+
+ pinctrl_usdhc3: usdhc3grp {
+ fsl,pins = <
+ MX6SLL_PAD_SD3_CMD__SD3_CMD 0x17059
+ MX6SLL_PAD_SD3_CLK__SD3_CLK 0x13059
+ MX6SLL_PAD_SD3_DATA0__SD3_DATA0 0x17059
+ MX6SLL_PAD_SD3_DATA1__SD3_DATA1 0x17059
+ MX6SLL_PAD_SD3_DATA2__SD3_DATA2 0x17059
+ MX6SLL_PAD_SD3_DATA3__SD3_DATA3 0x17059
+ >;
+ };
+
+ pinctrl_usdhc3_100mhz: usdhc3grp_100mhz {
+ fsl,pins = <
+ MX6SLL_PAD_SD3_CMD__SD3_CMD 0x170b9
+ MX6SLL_PAD_SD3_CLK__SD3_CLK 0x130b9
+ MX6SLL_PAD_SD3_DATA0__SD3_DATA0 0x170b9
+ MX6SLL_PAD_SD3_DATA1__SD3_DATA1 0x170b9
+ MX6SLL_PAD_SD3_DATA2__SD3_DATA2 0x170b9
+ MX6SLL_PAD_SD3_DATA3__SD3_DATA3 0x170b9
+ >;
+ };
+
+ pinctrl_usdhc3_200mhz: usdhc3grp_200mhz {
+ fsl,pins = <
+ MX6SLL_PAD_SD3_CMD__SD3_CMD 0x170f9
+ MX6SLL_PAD_SD3_CLK__SD3_CLK 0x130f9
+ MX6SLL_PAD_SD3_DATA0__SD3_DATA0 0x170f9
+ MX6SLL_PAD_SD3_DATA1__SD3_DATA1 0x170f9
+ MX6SLL_PAD_SD3_DATA2__SD3_DATA2 0x170f9
+ MX6SLL_PAD_SD3_DATA3__SD3_DATA3 0x170f9
+ >;
+ };
+
+ pinctrl_usbotg1: usbotg1grp {
+ fsl,pins = <
+ MX6SLL_PAD_EPDC_PWR_COM__USB_OTG1_ID 0x17059
+ >;
+ };
+
+ pinctrl_i2c1: i2c1grp {
+ fsl,pins = <
+ MX6SLL_PAD_I2C1_SCL__I2C1_SCL 0x4001b8b1
+ MX6SLL_PAD_I2C1_SDA__I2C1_SDA 0x4001b8b1
+ >;
+ };
+
+ pinctrl_i2c3: i2c3grp {
+ fsl,pins = <
+ MX6SLL_PAD_AUD_RXFS__I2C3_SCL 0x4041b8b1
+ MX6SLL_PAD_AUD_RXC__I2C3_SDA 0x4041b8b1
+ >;
+ };
+
+ pinctrl_pwm1: pmw1grp {
+ fsl,pins = <
+ MX6SLL_PAD_PWM1__PWM1_OUT 0x110b0
+ >;
+ };
+ };
+};
+
+&lcdif {
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_lcdif_dat
+ &pinctrl_lcdif_ctrl>;
+ lcd-supply = <®_lcd>;
+ display = <&display>;
+ status = "okay";
+
+ display: display {
+ bits-per-pixel = <16>;
+ bus-width = <24>;
+
+ display-timings {
+ native-mode = <&timing0>;
+ timing0: timing0 {
+ clock-frequency = <33500000>;
+ hactive = <800>;
+ vactive = <480>;
+ hback-porch = <89>;
+ hfront-porch = <164>;
+ vback-porch = <23>;
+ vfront-porch = <10>;
+ hsync-len = <10>;
+ vsync-len = <10>;
+ hsync-active = <0>;
+ vsync-active = <0>;
+ de-active = <1>;
+ pixelclk-active = <0>;
+ };
+ };
+ };
+};
+
+&pxp {
+ status = "okay";
+};
+
+&pwm1 {
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_pwm1>;
+ status = "okay";
+};
+
+&uart1 {
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_uart1>;
+ status = "okay";
+};
+
+&uart5 {
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_uart5>;
+ fsl,uart-has-rtscts;
+ /* for DTE mode, add below change */
+ /* fsl,dte-mode; */
+ /* pinctrl-0 = <&pinctrl_uart5dte>; */
+ status = "disabled";
+};
+
+&usdhc1 {
+ pinctrl-names = "default", "state_100mhz", "state_200mhz";
+ pinctrl-0 = <&pinctrl_usdhc1>;
+ pinctrl-1 = <&pinctrl_usdhc1_100mhz>;
+ pinctrl-2 = <&pinctrl_usdhc1_200mhz>;
+ cd-gpios = <&gpio4 7 GPIO_ACTIVE_LOW>;
+ wp-gpios = <&gpio4 22 GPIO_ACTIVE_HIGH>;
+ keep-power-in-suspend;
+ enable-sdio-wakeup;
+ vmmc-supply = <®_sd1_vmmc>;
+ status = "okay";
+};
+
+&usdhc2 {
+ pinctrl-names = "default", "state_100mhz", "state_200mhz";
+ pinctrl-0 = <&pinctrl_usdhc2>;
+ pinctrl-1 = <&pinctrl_usdhc2_100mhz>;
+ pinctrl-2 = <&pinctrl_usdhc2_200mhz>;
+ vqmmc-supply = <®_sd2_vmmc>;
+ bus-width = <8>;
+ no-removable;
+ status = "okay";
+};
+
+&usdhc3 {
+ pinctrl-names = "default", "state_100mhz", "state_200mhz";
+ pinctrl-0 = <&pinctrl_usdhc3>;
+ pinctrl-1 = <&pinctrl_usdhc3_100mhz>;
+ pinctrl-2 = <&pinctrl_usdhc3_200mhz>;
+ cd-gpios = <&gpio3 22 GPIO_ACTIVE_LOW>;
+ keep-power-in-suspend;
+ enable-sdio-wakeup;
+ vmmc-supply = <®_sd3_vmmc>;
+ status = "okay";
+};
+
+&usbotg1 {
+ vbus-supply = <®_usb_otg1_vbus>;
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_usbotg1>;
+ disable-over-current;
+ srp-disable;
+ hnp-disable;
+ adp-disable;
+ status = "okay";
+};
+
+&usbotg2 {
+ vbus-supply = <®_usb_otg2_vbus>;
+ dr_mode = "host";
+ disable-over-current;
+ status = "okay";
+};
+
+&epdc {
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_epdc0>;
+ V3P3-supply = <&V3P3_reg>;
+ VCOM-supply = <&VCOM_reg>;
+ DISPLAY-supply = <&DISPLAY_reg>;
+ status = "okay";
+};
+
+&ssi2 {
+ status = "okay";
+};
diff --git a/arch/arm/dts/imx6sll-pinfunc.h b/arch/arm/dts/imx6sll-pinfunc.h
new file mode 100644
index 0000000..5a3700b
--- /dev/null
+++ b/arch/arm/dts/imx6sll-pinfunc.h
@@ -0,0 +1,882 @@
+/*
+ * Copyright 2016 Freescale Semiconductor, Inc.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ *
+ */
+
+#ifndef __DTS_IMX6SLL_PINFUNC_H
+#define __DTS_IMX6SLL_PINFUNC_H
+
+/*
+ * The pin function ID is a tuple of
+ * <mux_reg conf_reg input_reg mux_mode input_val>
+ */
+#define MX6SLL_PAD_WDOG_B__WDOG1_B 0x0014 0x02DC 0x0000 0x0 0x0
+#define MX6SLL_PAD_WDOG_B__WDOG1_RESET_B_DEB 0x0014 0x02DC 0x0000 0x1 0x0
+#define MX6SLL_PAD_WDOG_B__UART5_RI_B 0x0014 0x02DC 0x0000 0x2 0x0
+#define MX6SLL_PAD_WDOG_B__GPIO3_IO18 0x0014 0x02DC 0x0000 0x5 0x0
+#define MX6SLL_PAD_REF_CLK_24M__XTALOSC_REF_CLK_24M 0x0018 0x02E0 0x0000 0x0 0x0
+#define MX6SLL_PAD_REF_CLK_24M__I2C3_SCL 0x0018 0x02E0 0x068C 0x1 0x0
+#define MX6SLL_PAD_REF_CLK_24M__PWM3_OUT 0x0018 0x02E0 0x0000 0x2 0x0
+#define MX6SLL_PAD_REF_CLK_24M__USB_OTG2_ID 0x0018 0x02E0 0x0560 0x3 0x0
+#define MX6SLL_PAD_REF_CLK_24M__CCM_PMIC_READY 0x0018 0x02E0 0x05AC 0x4 0x0
+#define MX6SLL_PAD_REF_CLK_24M__GPIO3_IO21 0x0018 0x02E0 0x0000 0x5 0x0
+#define MX6SLL_PAD_REF_CLK_24M__SD3_WP 0x0018 0x02E0 0x0794 0x6 0x0
+#define MX6SLL_PAD_REF_CLK_32K__XTALOSC_REF_CLK_32K 0x001C 0x02E4 0x0000 0x0 0x0
+#define MX6SLL_PAD_REF_CLK_32K__I2C3_SDA 0x001C 0x02E4 0x0690 0x1 0x0
+#define MX6SLL_PAD_REF_CLK_32K__PWM4_OUT 0x001C 0x02E4 0x0000 0x2 0x0
+#define MX6SLL_PAD_REF_CLK_32K__USB_OTG1_ID 0x001C 0x02E4 0x055C 0x3 0x0
+#define MX6SLL_PAD_REF_CLK_32K__SD1_LCTL 0x001C 0x02E4 0x0000 0x4 0x0
+#define MX6SLL_PAD_REF_CLK_32K__GPIO3_IO22 0x001C 0x02E4 0x0000 0x5 0x0
+#define MX6SLL_PAD_REF_CLK_32K__SD3_CD_B 0x001C 0x02E4 0x0780 0x6 0x0
+#define MX6SLL_PAD_PWM1__PWM1_OUT 0x0020 0x02E8 0x0000 0x0 0x0
+#define MX6SLL_PAD_PWM1__CCM_CLKO 0x0020 0x02E8 0x0000 0x1 0x0
+#define MX6SLL_PAD_PWM1__AUDIO_CLK_OUT 0x0020 0x02E8 0x0000 0x2 0x0
+#define MX6SLL_PAD_PWM1__CSI_MCLK 0x0020 0x02E8 0x0000 0x4 0x0
+#define MX6SLL_PAD_PWM1__GPIO3_IO23 0x0020 0x02E8 0x0000 0x5 0x0
+#define MX6SLL_PAD_PWM1__EPIT1_OUT 0x0020 0x02E8 0x0000 0x6 0x0
+#define MX6SLL_PAD_KEY_COL0__KEY_COL0 0x0024 0x02EC 0x06A0 0x0 0x0
+#define MX6SLL_PAD_KEY_COL0__I2C2_SCL 0x0024 0x02EC 0x0684 0x1 0x0
+#define MX6SLL_PAD_KEY_COL0__LCD_DATA00 0x0024 0x02EC 0x06D8 0x2 0x0
+#define MX6SLL_PAD_KEY_COL0__SD1_CD_B 0x0024 0x02EC 0x0770 0x4 0x1
+#define MX6SLL_PAD_KEY_COL0__GPIO3_IO24 0x0024 0x02EC 0x0000 0x5 0x0
+#define MX6SLL_PAD_KEY_ROW0__KEY_ROW0 0x0028 0x02F0 0x06C0 0x0 0x0
+#define MX6SLL_PAD_KEY_ROW0__I2C2_SDA 0x0028 0x02F0 0x0688 0x1 0x0
+#define MX6SLL_PAD_KEY_ROW0__LCD_DATA01 0x0028 0x02F0 0x06DC 0x2 0x0
+#define MX6SLL_PAD_KEY_ROW0__SD1_WP 0x0028 0x02F0 0x0774 0x4 0x1
+#define MX6SLL_PAD_KEY_ROW0__GPIO3_IO25 0x0028 0x02F0 0x0000 0x5 0x0
+#define MX6SLL_PAD_KEY_COL1__KEY_COL1 0x002C 0x02F4 0x06A4 0x0 0x0
+#define MX6SLL_PAD_KEY_COL1__ECSPI4_MOSI 0x002C 0x02F4 0x0658 0x1 0x1
+#define MX6SLL_PAD_KEY_COL1__LCD_DATA02 0x002C 0x02F4 0x06E0 0x2 0x0
+#define MX6SLL_PAD_KEY_COL1__SD3_DATA4 0x002C 0x02F4 0x0784 0x4 0x0
+#define MX6SLL_PAD_KEY_COL1__GPIO3_IO26 0x002C 0x02F4 0x0000 0x5 0x0
+#define MX6SLL_PAD_KEY_ROW1__KEY_ROW1 0x0030 0x02F8 0x06C4 0x0 0x0
+#define MX6SLL_PAD_KEY_ROW1__ECSPI4_MISO 0x0030 0x02F8 0x0654 0x1 0x1
+#define MX6SLL_PAD_KEY_ROW1__LCD_DATA03 0x0030 0x02F8 0x06E4 0x2 0x0
+#define MX6SLL_PAD_KEY_ROW1__CSI_FIELD 0x0030 0x02F8 0x0000 0x3 0x0
+#define MX6SLL_PAD_KEY_ROW1__SD3_DATA5 0x0030 0x02F8 0x0788 0x4 0x0
+#define MX6SLL_PAD_KEY_ROW1__GPIO3_IO27 0x0030 0x02F8 0x0000 0x5 0x0
+#define MX6SLL_PAD_KEY_COL2__KEY_COL2 0x0034 0x02FC 0x06A8 0x0 0x0
+#define MX6SLL_PAD_KEY_COL2__ECSPI4_SS0 0x0034 0x02FC 0x065C 0x1 0x1
+#define MX6SLL_PAD_KEY_COL2__LCD_DATA04 0x0034 0x02FC 0x06E8 0x2 0x0
+#define MX6SLL_PAD_KEY_COL2__CSI_DATA12 0x0034 0x02FC 0x05B8 0x3 0x1
+#define MX6SLL_PAD_KEY_COL2__SD3_DATA6 0x0034 0x02FC 0x078C 0x4 0x0
+#define MX6SLL_PAD_KEY_COL2__GPIO3_IO28 0x0034 0x02FC 0x0000 0x5 0x0
+#define MX6SLL_PAD_KEY_ROW2__KEY_ROW2 0x0038 0x0300 0x06C8 0x0 0x0
+#define MX6SLL_PAD_KEY_ROW2__ECSPI4_SCLK 0x0038 0x0300 0x0650 0x1 0x1
+#define MX6SLL_PAD_KEY_ROW2__LCD_DATA05 0x0038 0x0300 0x06EC 0x2 0x0
+#define MX6SLL_PAD_KEY_ROW2__CSI_DATA13 0x0038 0x0300 0x05BC 0x3 0x1
+#define MX6SLL_PAD_KEY_ROW2__SD3_DATA7 0x0038 0x0300 0x0790 0x4 0x0
+#define MX6SLL_PAD_KEY_ROW2__GPIO3_IO29 0x0038 0x0300 0x0000 0x5 0x0
+#define MX6SLL_PAD_KEY_COL3__KEY_COL3 0x003C 0x0304 0x06AC 0x0 0x0
+#define MX6SLL_PAD_KEY_COL3__AUD6_RXFS 0x003C 0x0304 0x05A0 0x1 0x1
+#define MX6SLL_PAD_KEY_COL3__LCD_DATA06 0x003C 0x0304 0x06F0 0x2 0x0
+#define MX6SLL_PAD_KEY_COL3__CSI_DATA14 0x003C 0x0304 0x05C0 0x3 0x1
+#define MX6SLL_PAD_KEY_COL3__GPIO3_IO30 0x003C 0x0304 0x0000 0x5 0x0
+#define MX6SLL_PAD_KEY_COL3__SD1_RESET 0x003C 0x0304 0x0000 0x6 0x0
+#define MX6SLL_PAD_KEY_ROW3__KEY_ROW3 0x0040 0x0308 0x06CC 0x0 0x1
+#define MX6SLL_PAD_KEY_ROW3__AUD6_RXC 0x0040 0x0308 0x059C 0x1 0x1
+#define MX6SLL_PAD_KEY_ROW3__LCD_DATA07 0x0040 0x0308 0x06F4 0x2 0x1
+#define MX6SLL_PAD_KEY_ROW3__CSI_DATA15 0x0040 0x0308 0x05C4 0x3 0x2
+#define MX6SLL_PAD_KEY_ROW3__GPIO3_IO31 0x0040 0x0308 0x0000 0x5 0x0
+#define MX6SLL_PAD_KEY_ROW3__SD1_VSELECT 0x0040 0x0308 0x0000 0x6 0x0
+#define MX6SLL_PAD_KEY_COL4__KEY_COL4 0x0044 0x030C 0x06B0 0x0 0x1
+#define MX6SLL_PAD_KEY_COL4__AUD6_RXD 0x0044 0x030C 0x0594 0x1 0x1
+#define MX6SLL_PAD_KEY_COL4__LCD_DATA08 0x0044 0x030C 0x06F8 0x2 0x1
+#define MX6SLL_PAD_KEY_COL4__CSI_DATA16 0x0044 0x030C 0x0000 0x3 0x0
+#define MX6SLL_PAD_KEY_COL4__GPIO4_IO00 0x0044 0x030C 0x0000 0x5 0x0
+#define MX6SLL_PAD_KEY_COL4__USB_OTG1_PWR 0x0044 0x030C 0x0000 0x6 0x0
+#define MX6SLL_PAD_KEY_ROW4__KEY_ROW4 0x0048 0x0310 0x06D0 0x0 0x1
+#define MX6SLL_PAD_KEY_ROW4__AUD6_TXC 0x0048 0x0310 0x05A4 0x1 0x1
+#define MX6SLL_PAD_KEY_ROW4__LCD_DATA09 0x0048 0x0310 0x06FC 0x2 0x1
+#define MX6SLL_PAD_KEY_ROW4__CSI_DATA17 0x0048 0x0310 0x0000 0x3 0x0
+#define MX6SLL_PAD_KEY_ROW4__GPIO4_IO01 0x0048 0x0310 0x0000 0x5 0x0
+#define MX6SLL_PAD_KEY_ROW4__USB_OTG1_OC 0x0048 0x0310 0x076C 0x6 0x2
+#define MX6SLL_PAD_KEY_COL5__KEY_COL5 0x004C 0x0314 0x0694 0x0 0x1
+#define MX6SLL_PAD_KEY_COL5__AUD6_TXFS 0x004C 0x0314 0x05A8 0x1 0x1
+#define MX6SLL_PAD_KEY_COL5__LCD_DATA10 0x004C 0x0314 0x0700 0x2 0x0
+#define MX6SLL_PAD_KEY_COL5__CSI_DATA18 0x004C 0x0314 0x0000 0x3 0x0
+#define MX6SLL_PAD_KEY_COL5__GPIO4_IO02 0x004C 0x0314 0x0000 0x5 0x0
+#define MX6SLL_PAD_KEY_COL5__USB_OTG2_PWR 0x004C 0x0314 0x0000 0x6 0x0
+#define MX6SLL_PAD_KEY_ROW5__KEY_ROW5 0x0050 0x0318 0x06B4 0x0 0x2
+#define MX6SLL_PAD_KEY_ROW5__AUD6_TXD 0x0050 0x0318 0x0598 0x1 0x1
+#define MX6SLL_PAD_KEY_ROW5__LCD_DATA11 0x0050 0x0318 0x0704 0x2 0x1
+#define MX6SLL_PAD_KEY_ROW5__CSI_DATA19 0x0050 0x0318 0x0000 0x3 0x0
+#define MX6SLL_PAD_KEY_ROW5__GPIO4_IO03 0x0050 0x0318 0x0000 0x5 0x0
+#define MX6SLL_PAD_KEY_ROW5__USB_OTG2_OC 0x0050 0x0318 0x0768 0x6 0x3
+#define MX6SLL_PAD_KEY_COL6__KEY_COL6 0x0054 0x031C 0x0698 0x0 0x2
+#define MX6SLL_PAD_KEY_COL6__UART4_DCE_RX 0x0054 0x031C 0x075C 0x1 0x2
+#define MX6SLL_PAD_KEY_COL6__UART4_DTE_TX 0x0054 0x031C 0x0000 0x1 0x0
+#define MX6SLL_PAD_KEY_COL6__LCD_DATA12 0x0054 0x031C 0x0708 0x2 0x1
+#define MX6SLL_PAD_KEY_COL6__CSI_DATA20 0x0054 0x031C 0x0000 0x3 0x0
+#define MX6SLL_PAD_KEY_COL6__GPIO4_IO04 0x0054 0x031C 0x0000 0x5 0x0
+#define MX6SLL_PAD_KEY_COL6__SD3_RESET 0x0054 0x031C 0x0000 0x6 0x0
+#define MX6SLL_PAD_KEY_ROW6__KEY_ROW6 0x0058 0x0320 0x06B8 0x0 0x2
+#define MX6SLL_PAD_KEY_ROW6__UART4_DCE_TX 0x0058 0x0320 0x0000 0x1 0x0
+#define MX6SLL_PAD_KEY_ROW6__UART4_DTE_RX 0x0058 0x0320 0x075C 0x1 0x3
+#define MX6SLL_PAD_KEY_ROW6__LCD_DATA13 0x0058 0x0320 0x070C 0x2 0x1
+#define MX6SLL_PAD_KEY_ROW6__CSI_DATA21 0x0058 0x0320 0x0000 0x3 0x0
+#define MX6SLL_PAD_KEY_ROW6__GPIO4_IO05 0x0058 0x0320 0x0000 0x5 0x0
+#define MX6SLL_PAD_KEY_ROW6__SD3_VSELECT 0x0058 0x0320 0x0000 0x6 0x0
+#define MX6SLL_PAD_KEY_COL7__KEY_COL7 0x005C 0x0324 0x069C 0x0 0x2
+#define MX6SLL_PAD_KEY_COL7__UART4_DCE_RTS 0x005C 0x0324 0x0758 0x1 0x2
+#define MX6SLL_PAD_KEY_COL7__UART4_DTE_CTS 0x005C 0x0324 0x0000 0x1 0x0
+#define MX6SLL_PAD_KEY_COL7__LCD_DATA14 0x005C 0x0324 0x0710 0x2 0x1
+#define MX6SLL_PAD_KEY_COL7__CSI_DATA22 0x005C 0x0324 0x0000 0x3 0x0
+#define MX6SLL_PAD_KEY_COL7__GPIO4_IO06 0x005C 0x0324 0x0000 0x5 0x0
+#define MX6SLL_PAD_KEY_COL7__SD1_WP 0x005C 0x0324 0x0774 0x6 0x3
+#define MX6SLL_PAD_KEY_ROW7__KEY_ROW7 0x0060 0x0328 0x06BC 0x0 0x2
+#define MX6SLL_PAD_KEY_ROW7__UART4_DCE_CTS 0x0060 0x0328 0x0000 0x1 0x0
+#define MX6SLL_PAD_KEY_ROW7__UART4_DTE_RTS 0x0060 0x0328 0x0758 0x1 0x3
+#define MX6SLL_PAD_KEY_ROW7__LCD_DATA15 0x0060 0x0328 0x0714 0x2 0x1
+#define MX6SLL_PAD_KEY_ROW7__CSI_DATA23 0x0060 0x0328 0x0000 0x3 0x0
+#define MX6SLL_PAD_KEY_ROW7__GPIO4_IO07 0x0060 0x0328 0x0000 0x5 0x0
+#define MX6SLL_PAD_KEY_ROW7__SD1_CD_B 0x0060 0x0328 0x0770 0x6 0x3
+#define MX6SLL_PAD_EPDC_DATA00__EPDC_DATA00 0x0064 0x032C 0x0000 0x0 0x0
+#define MX6SLL_PAD_EPDC_DATA00__ECSPI4_MOSI 0x0064 0x032C 0x0658 0x1 0x2
+#define MX6SLL_PAD_EPDC_DATA00__LCD_DATA24 0x0064 0x032C 0x0000 0x2 0x0
+#define MX6SLL_PAD_EPDC_DATA00__CSI_DATA00 0x0064 0x032C 0x05C8 0x3 0x2
+#define MX6SLL_PAD_EPDC_DATA00__GPIO1_IO07 0x0064 0x032C 0x0000 0x5 0x0
+#define MX6SLL_PAD_EPDC_DATA01__EPDC_DATA01 0x0068 0x0330 0x0000 0x0 0x0
+#define MX6SLL_PAD_EPDC_DATA01__ECSPI4_MISO 0x0068 0x0330 0x0654 0x1 0x2
+#define MX6SLL_PAD_EPDC_DATA01__LCD_DATA25 0x0068 0x0330 0x0000 0x2 0x0
+#define MX6SLL_PAD_EPDC_DATA01__CSI_DATA01 0x0068 0x0330 0x05CC 0x3 0x2
+#define MX6SLL_PAD_EPDC_DATA01__GPIO1_IO08 0x0068 0x0330 0x0000 0x5 0x0
+#define MX6SLL_PAD_EPDC_DATA02__EPDC_DATA02 0x006C 0x0334 0x0000 0x0 0x0
+#define MX6SLL_PAD_EPDC_DATA02__ECSPI4_SS0 0x006C 0x0334 0x065C 0x1 0x2
+#define MX6SLL_PAD_EPDC_DATA02__LCD_DATA26 0x006C 0x0334 0x0000 0x2 0x0
+#define MX6SLL_PAD_EPDC_DATA02__CSI_DATA02 0x006C 0x0334 0x05D0 0x3 0x2
+#define MX6SLL_PAD_EPDC_DATA02__GPIO1_IO09 0x006C 0x0334 0x0000 0x5 0x0
+#define MX6SLL_PAD_EPDC_DATA03__EPDC_DATA03 0x0070 0x0338 0x0000 0x0 0x0
+#define MX6SLL_PAD_EPDC_DATA03__ECSPI4_SCLK 0x0070 0x0338 0x0650 0x1 0x2
+#define MX6SLL_PAD_EPDC_DATA03__LCD_DATA27 0x0070 0x0338 0x0000 0x2 0x0
+#define MX6SLL_PAD_EPDC_DATA03__CSI_DATA03 0x0070 0x0338 0x05D4 0x3 0x2
+#define MX6SLL_PAD_EPDC_DATA03__GPIO1_IO10 0x0070 0x0338 0x0000 0x5 0x0
+#define MX6SLL_PAD_EPDC_DATA04__EPDC_DATA04 0x0074 0x033C 0x0000 0x0 0x0
+#define MX6SLL_PAD_EPDC_DATA04__ECSPI4_SS1 0x0074 0x033C 0x0660 0x1 0x1
+#define MX6SLL_PAD_EPDC_DATA04__LCD_DATA28 0x0074 0x033C 0x0000 0x2 0x0
+#define MX6SLL_PAD_EPDC_DATA04__CSI_DATA04 0x0074 0x033C 0x05D8 0x3 0x2
+#define MX6SLL_PAD_EPDC_DATA04__GPIO1_IO11 0x0074 0x033C 0x0000 0x5 0x0
+#define MX6SLL_PAD_EPDC_DATA05__EPDC_DATA05 0x0078 0x0340 0x0000 0x0 0x0
+#define MX6SLL_PAD_EPDC_DATA05__ECSPI4_SS2 0x0078 0x0340 0x0664 0x1 0x1
+#define MX6SLL_PAD_EPDC_DATA05__LCD_DATA29 0x0078 0x0340 0x0000 0x2 0x0
+#define MX6SLL_PAD_EPDC_DATA05__CSI_DATA05 0x0078 0x0340 0x05DC 0x3 0x2
+#define MX6SLL_PAD_EPDC_DATA05__GPIO1_IO12 0x0078 0x0340 0x0000 0x5 0x0
+#define MX6SLL_PAD_EPDC_DATA06__EPDC_DATA06 0x007C 0x0344 0x0000 0x0 0x0
+#define MX6SLL_PAD_EPDC_DATA06__ECSPI4_SS3 0x007C 0x0344 0x0000 0x1 0x0
+#define MX6SLL_PAD_EPDC_DATA06__LCD_DATA30 0x007C 0x0344 0x0000 0x2 0x0
+#define MX6SLL_PAD_EPDC_DATA06__CSI_DATA06 0x007C 0x0344 0x05E0 0x3 0x2
+#define MX6SLL_PAD_EPDC_DATA06__GPIO1_IO13 0x007C 0x0344 0x0000 0x5 0x0
+#define MX6SLL_PAD_EPDC_DATA07__EPDC_DATA07 0x0080 0x0348 0x0000 0x0 0x0
+#define MX6SLL_PAD_EPDC_DATA07__ECSPI4_RDY 0x0080 0x0348 0x0000 0x1 0x0
+#define MX6SLL_PAD_EPDC_DATA07__LCD_DATA31 0x0080 0x0348 0x0000 0x2 0x0
+#define MX6SLL_PAD_EPDC_DATA07__CSI_DATA07 0x0080 0x0348 0x05E4 0x3 0x2
+#define MX6SLL_PAD_EPDC_DATA07__GPIO1_IO14 0x0080 0x0348 0x0000 0x5 0x0
+#define MX6SLL_PAD_EPDC_DATA08__EPDC_DATA08 0x0084 0x034C 0x0000 0x0 0x0
+#define MX6SLL_PAD_EPDC_DATA08__ECSPI3_MOSI 0x0084 0x034C 0x063C 0x1 0x2
+#define MX6SLL_PAD_EPDC_DATA08__EPDC_PWR_CTRL0 0x0084 0x034C 0x0000 0x2 0x0
+#define MX6SLL_PAD_EPDC_DATA08__GPIO1_IO15 0x0084 0x034C 0x0000 0x5 0x0
+#define MX6SLL_PAD_EPDC_DATA09__EPDC_DATA09 0x0088 0x0350 0x0000 0x0 0x0
+#define MX6SLL_PAD_EPDC_DATA09__ECSPI3_MISO 0x0088 0x0350 0x0638 0x1 0x2
+#define MX6SLL_PAD_EPDC_DATA09__EPDC_PWR_CTRL1 0x0088 0x0350 0x0000 0x2 0x0
+#define MX6SLL_PAD_EPDC_DATA09__GPIO1_IO16 0x0088 0x0350 0x0000 0x5 0x0
+#define MX6SLL_PAD_EPDC_DATA10__EPDC_DATA10 0x008C 0x0354 0x0000 0x0 0x0
+#define MX6SLL_PAD_EPDC_DATA10__ECSPI3_SS0 0x008C 0x0354 0x0648 0x1 0x2
+#define MX6SLL_PAD_EPDC_DATA10__EPDC_PWR_CTRL2 0x008C 0x0354 0x0000 0x2 0x0
+#define MX6SLL_PAD_EPDC_DATA10__GPIO1_IO17 0x008C 0x0354 0x0000 0x5 0x0
+#define MX6SLL_PAD_EPDC_DATA11__EPDC_DATA11 0x0090 0x0358 0x0000 0x0 0x0
+#define MX6SLL_PAD_EPDC_DATA11__ECSPI3_SCLK 0x0090 0x0358 0x0630 0x1 0x2
+#define MX6SLL_PAD_EPDC_DATA11__EPDC_PWR_CTRL3 0x0090 0x0358 0x0000 0x2 0x0
+#define MX6SLL_PAD_EPDC_DATA11__GPIO1_IO18 0x0090 0x0358 0x0000 0x5 0x0
+#define MX6SLL_PAD_EPDC_DATA12__EPDC_DATA12 0x0094 0x035C 0x0000 0x0 0x0
+#define MX6SLL_PAD_EPDC_DATA12__UART2_DCE_RX 0x0094 0x035C 0x074C 0x1 0x4
+#define MX6SLL_PAD_EPDC_DATA12__UART2_DTE_TX 0x0094 0x035C 0x0000 0x1 0x0
+#define MX6SLL_PAD_EPDC_DATA12__EPDC_PWR_COM 0x0094 0x035C 0x0000 0x2 0x0
+#define MX6SLL_PAD_EPDC_DATA12__GPIO1_IO19 0x0094 0x035C 0x0000 0x5 0x0
+#define MX6SLL_PAD_EPDC_DATA12__ECSPI3_SS1 0x0094 0x035C 0x064C 0x6 0x1
+#define MX6SLL_PAD_EPDC_DATA13__EPDC_DATA13 0x0098 0x0360 0x0000 0x0 0x0
+#define MX6SLL_PAD_EPDC_DATA13__UART2_DCE_TX 0x0098 0x0360 0x0000 0x1 0x0
+#define MX6SLL_PAD_EPDC_DATA13__UART2_DTE_RX 0x0098 0x0360 0x074C 0x1 0x5
+#define MX6SLL_PAD_EPDC_DATA13__EPDC_PWR_IRQ 0x0098 0x0360 0x0668 0x2 0x0
+#define MX6SLL_PAD_EPDC_DATA13__GPIO1_IO20 0x0098 0x0360 0x0000 0x5 0x0
+#define MX6SLL_PAD_EPDC_DATA13__ECSPI3_SS2 0x0098 0x0360 0x0640 0x6 0x1
+#define MX6SLL_PAD_EPDC_DATA14__EPDC_DATA14 0x009C 0x0364 0x0000 0x0 0x0
+#define MX6SLL_PAD_EPDC_DATA14__UART2_DCE_RTS 0x009C 0x0364 0x0748 0x1 0x4
+#define MX6SLL_PAD_EPDC_DATA14__UART2_DTE_CTS 0x009C 0x0364 0x0000 0x1 0x0
+#define MX6SLL_PAD_EPDC_DATA14__EPDC_PWR_STAT 0x009C 0x0364 0x066C 0x2 0x0
+#define MX6SLL_PAD_EPDC_DATA14__GPIO1_IO21 0x009C 0x0364 0x0000 0x5 0x0
+#define MX6SLL_PAD_EPDC_DATA14__ECSPI3_SS3 0x009C 0x0364 0x0644 0x6 0x1
+#define MX6SLL_PAD_EPDC_DATA15__EPDC_DATA15 0x00A0 0x0368 0x0000 0x0 0x0
+#define MX6SLL_PAD_EPDC_DATA15__UART2_DCE_CTS 0x00A0 0x0368 0x0000 0x1 0x0
+#define MX6SLL_PAD_EPDC_DATA15__UART2_DTE_RTS 0x00A0 0x0368 0x0748 0x1 0x5
+#define MX6SLL_PAD_EPDC_DATA15__EPDC_PWR_WAKE 0x00A0 0x0368 0x0000 0x2 0x0
+#define MX6SLL_PAD_EPDC_DATA15__GPIO1_IO22 0x00A0 0x0368 0x0000 0x5 0x0
+#define MX6SLL_PAD_EPDC_DATA15__ECSPI3_RDY 0x00A0 0x0368 0x0634 0x6 0x1
+#define MX6SLL_PAD_EPDC_SDCLK__EPDC_SDCLK_P 0x00A4 0x036C 0x0000 0x0 0x0
+#define MX6SLL_PAD_EPDC_SDCLK__ECSPI2_MOSI 0x00A4 0x036C 0x0624 0x1 0x2
+#define MX6SLL_PAD_EPDC_SDCLK__I2C2_SCL 0x00A4 0x036C 0x0684 0x2 0x2
+#define MX6SLL_PAD_EPDC_SDCLK__CSI_DATA08 0x00A4 0x036C 0x05E8 0x3 0x2
+#define MX6SLL_PAD_EPDC_SDCLK__GPIO1_IO23 0x00A4 0x036C 0x0000 0x5 0x0
+#define MX6SLL_PAD_EPDC_SDLE__EPDC_SDLE 0x00A8 0x0370 0x0000 0x0 0x0
+#define MX6SLL_PAD_EPDC_SDLE__ECSPI2_MISO 0x00A8 0x0370 0x0620 0x1 0x2
+#define MX6SLL_PAD_EPDC_SDLE__I2C2_SDA 0x00A8 0x0370 0x0688 0x2 0x2
+#define MX6SLL_PAD_EPDC_SDLE__CSI_DATA09 0x00A8 0x0370 0x05EC 0x3 0x2
+#define MX6SLL_PAD_EPDC_SDLE__GPIO1_IO24 0x00A8 0x0370 0x0000 0x5 0x0
+#define MX6SLL_PAD_EPDC_SDOE__EPDC_SDOE 0x00AC 0x0374 0x0000 0x0 0x0
+#define MX6SLL_PAD_EPDC_SDOE__ECSPI2_SS0 0x00AC 0x0374 0x0628 0x1 0x1
+#define MX6SLL_PAD_EPDC_SDOE__CSI_DATA10 0x00AC 0x0374 0x05B0 0x3 0x2
+#define MX6SLL_PAD_EPDC_SDOE__GPIO1_IO25 0x00AC 0x0374 0x0000 0x5 0x0
+#define MX6SLL_PAD_EPDC_SDSHR__EPDC_SDSHR 0x00B0 0x0378 0x0000 0x0 0x0
+#define MX6SLL_PAD_EPDC_SDSHR__ECSPI2_SCLK 0x00B0 0x0378 0x061C 0x1 0x2
+#define MX6SLL_PAD_EPDC_SDSHR__EPDC_SDCE4 0x00B0 0x0378 0x0000 0x2 0x0
+#define MX6SLL_PAD_EPDC_SDSHR__CSI_DATA11 0x00B0 0x0378 0x05B4 0x3 0x2
+#define MX6SLL_PAD_EPDC_SDSHR__GPIO1_IO26 0x00B0 0x0378 0x0000 0x5 0x0
+#define MX6SLL_PAD_EPDC_SDCE0__EPDC_SDCE0 0x00B4 0x037C 0x0000 0x0 0x0
+#define MX6SLL_PAD_EPDC_SDCE0__ECSPI2_SS1 0x00B4 0x037C 0x062C 0x1 0x1
+#define MX6SLL_PAD_EPDC_SDCE0__PWM3_OUT 0x00B4 0x037C 0x0000 0x2 0x0
+#define MX6SLL_PAD_EPDC_SDCE0__GPIO1_IO27 0x00B4 0x037C 0x0000 0x5 0x0
+#define MX6SLL_PAD_EPDC_SDCE1__EPDC_SDCE1 0x00B8 0x0380 0x0000 0x0 0x0
+#define MX6SLL_PAD_EPDC_SDCE1__WDOG2_B 0x00B8 0x0380 0x0000 0x1 0x0
+#define MX6SLL_PAD_EPDC_SDCE1__PWM4_OUT 0x00B8 0x0380 0x0000 0x2 0x0
+#define MX6SLL_PAD_EPDC_SDCE1__GPIO1_IO28 0x00B8 0x0380 0x0000 0x5 0x0
+#define MX6SLL_PAD_EPDC_SDCE2__EPDC_SDCE2 0x00BC 0x0384 0x0000 0x0 0x0
+#define MX6SLL_PAD_EPDC_SDCE2__I2C3_SCL 0x00BC 0x0384 0x068C 0x1 0x2
+#define MX6SLL_PAD_EPDC_SDCE2__PWM1_OUT 0x00BC 0x0384 0x0000 0x2 0x0
+#define MX6SLL_PAD_EPDC_SDCE2__GPIO1_IO29 0x00BC 0x0384 0x0000 0x5 0x0
+#define MX6SLL_PAD_EPDC_SDCE3__EPDC_SDCE3 0x00C0 0x0388 0x0000 0x0 0x0
+#define MX6SLL_PAD_EPDC_SDCE3__I2C3_SDA 0x00C0 0x0388 0x0690 0x1 0x2
+#define MX6SLL_PAD_EPDC_SDCE3__PWM2_OUT 0x00C0 0x0388 0x0000 0x2 0x0
+#define MX6SLL_PAD_EPDC_SDCE3__GPIO1_IO30 0x00C0 0x0388 0x0000 0x5 0x0
+#define MX6SLL_PAD_EPDC_GDCLK__EPDC_GDCLK 0x00C4 0x038C 0x0000 0x0 0x0
+#define MX6SLL_PAD_EPDC_GDCLK__ECSPI2_SS2 0x00C4 0x038C 0x0000 0x1 0x0
+#define MX6SLL_PAD_EPDC_GDCLK__CSI_PIXCLK 0x00C4 0x038C 0x05F4 0x3 0x2
+#define MX6SLL_PAD_EPDC_GDCLK__GPIO1_IO31 0x00C4 0x038C 0x0000 0x5 0x0
+#define MX6SLL_PAD_EPDC_GDCLK__SD2_RESET 0x00C4 0x038C 0x0000 0x6 0x0
+#define MX6SLL_PAD_EPDC_GDOE__EPDC_GDOE 0x00C8 0x0390 0x0000 0x0 0x0
+#define MX6SLL_PAD_EPDC_GDOE__ECSPI2_SS3 0x00C8 0x0390 0x0000 0x1 0x0
+#define MX6SLL_PAD_EPDC_GDOE__CSI_HSYNC 0x00C8 0x0390 0x05F0 0x3 0x2
+#define MX6SLL_PAD_EPDC_GDOE__GPIO2_IO00 0x00C8 0x0390 0x0000 0x5 0x0
+#define MX6SLL_PAD_EPDC_GDOE__SD2_VSELECT 0x00C8 0x0390 0x0000 0x6 0x0
+#define MX6SLL_PAD_EPDC_GDRL__EPDC_GDRL 0x00CC 0x0394 0x0000 0x0 0x0
+#define MX6SLL_PAD_EPDC_GDRL__ECSPI2_RDY 0x00CC 0x0394 0x0000 0x1 0x0
+#define MX6SLL_PAD_EPDC_GDRL__CSI_MCLK 0x00CC 0x0394 0x0000 0x3 0x0
+#define MX6SLL_PAD_EPDC_GDRL__GPIO2_IO01 0x00CC 0x0394 0x0000 0x5 0x0
+#define MX6SLL_PAD_EPDC_GDRL__SD2_WP 0x00CC 0x0394 0x077C 0x6 0x2
+#define MX6SLL_PAD_EPDC_GDSP__EPDC_GDSP 0x00D0 0x0398 0x0000 0x0 0x0
+#define MX6SLL_PAD_EPDC_GDSP__PWM4_OUT 0x00D0 0x0398 0x0000 0x1 0x0
+#define MX6SLL_PAD_EPDC_GDSP__CSI_VSYNC 0x00D0 0x0398 0x05F8 0x3 0x2
+#define MX6SLL_PAD_EPDC_GDSP__GPIO2_IO02 0x00D0 0x0398 0x0000 0x5 0x0
+#define MX6SLL_PAD_EPDC_GDSP__SD2_CD_B 0x00D0 0x0398 0x0778 0x6 0x2
+#define MX6SLL_PAD_EPDC_VCOM0__EPDC_VCOM0 0x00D4 0x039C 0x0000 0x0 0x0
+#define MX6SLL_PAD_EPDC_VCOM0__AUD5_RXFS 0x00D4 0x039C 0x0588 0x1 0x1
+#define MX6SLL_PAD_EPDC_VCOM0__UART3_DCE_RX 0x00D4 0x039C 0x0754 0x2 0x4
+#define MX6SLL_PAD_EPDC_VCOM0__UART3_DTE_TX 0x00D4 0x039C 0x0000 0x2 0x0
+#define MX6SLL_PAD_EPDC_VCOM0__GPIO2_IO03 0x00D4 0x039C 0x0000 0x5 0x0
+#define MX6SLL_PAD_EPDC_VCOM0__EPDC_SDCE5 0x00D4 0x039C 0x0000 0x6 0x0
+#define MX6SLL_PAD_EPDC_VCOM1__EPDC_VCOM1 0x00D8 0x03A0 0x0000 0x0 0x0
+#define MX6SLL_PAD_EPDC_VCOM1__AUD5_RXD 0x00D8 0x03A0 0x057C 0x1 0x1
+#define MX6SLL_PAD_EPDC_VCOM1__UART3_DCE_TX 0x00D8 0x03A0 0x0000 0x2 0x0
+#define MX6SLL_PAD_EPDC_VCOM1__UART3_DTE_RX 0x00D8 0x03A0 0x0754 0x2 0x5
+#define MX6SLL_PAD_EPDC_VCOM1__GPIO2_IO04 0x00D8 0x03A0 0x0000 0x5 0x0
+#define MX6SLL_PAD_EPDC_VCOM1__EPDC_SDCE6 0x00D8 0x03A0 0x0000 0x6 0x0
+#define MX6SLL_PAD_EPDC_BDR0__EPDC_BDR0 0x00DC 0x03A4 0x0000 0x0 0x0
+#define MX6SLL_PAD_EPDC_BDR0__UART3_DCE_RTS 0x00DC 0x03A4 0x0750 0x2 0x2
+#define MX6SLL_PAD_EPDC_BDR0__UART3_DTE_CTS 0x00DC 0x03A4 0x0000 0x2 0x0
+#define MX6SLL_PAD_EPDC_BDR0__GPIO2_IO05 0x00DC 0x03A4 0x0000 0x5 0x0
+#define MX6SLL_PAD_EPDC_BDR0__EPDC_SDCE7 0x00DC 0x03A4 0x0000 0x6 0x0
+#define MX6SLL_PAD_EPDC_BDR1__EPDC_BDR1 0x00E0 0x03A8 0x0000 0x0 0x0
+#define MX6SLL_PAD_EPDC_BDR1__UART3_DCE_CTS 0x00E0 0x03A8 0x0000 0x2 0x0
+#define MX6SLL_PAD_EPDC_BDR1__UART3_DTE_RTS 0x00E0 0x03A8 0x0750 0x2 0x3
+#define MX6SLL_PAD_EPDC_BDR1__GPIO2_IO06 0x00E0 0x03A8 0x0000 0x5 0x0
+#define MX6SLL_PAD_EPDC_BDR1__EPDC_SDCE8 0x00E0 0x03A8 0x0000 0x6 0x0
+#define MX6SLL_PAD_EPDC_PWR_CTRL0__EPDC_PWR_CTRL0 0x00E4 0x03AC 0x0000 0x0 0x0
+#define MX6SLL_PAD_EPDC_PWR_CTRL0__AUD5_RXC 0x00E4 0x03AC 0x0584 0x1 0x1
+#define MX6SLL_PAD_EPDC_PWR_CTRL0__LCD_DATA16 0x00E4 0x03AC 0x0718 0x2 0x1
+#define MX6SLL_PAD_EPDC_PWR_CTRL0__GPIO2_IO07 0x00E4 0x03AC 0x0000 0x5 0x0
+#define MX6SLL_PAD_EPDC_PWR_CTRL1__EPDC_PWR_CTRL1 0x00E8 0x03B0 0x0000 0x0 0x0
+#define MX6SLL_PAD_EPDC_PWR_CTRL1__AUD5_TXFS 0x00E8 0x03B0 0x0590 0x1 0x1
+#define MX6SLL_PAD_EPDC_PWR_CTRL1__LCD_DATA17 0x00E8 0x03B0 0x071C 0x2 0x1
+#define MX6SLL_PAD_EPDC_PWR_CTRL1__GPIO2_IO08 0x00E8 0x03B0 0x0000 0x5 0x0
+#define MX6SLL_PAD_EPDC_PWR_CTRL2__EPDC_PWR_CTRL2 0x00EC 0x03B4 0x0000 0x0 0x0
+#define MX6SLL_PAD_EPDC_PWR_CTRL2__AUD5_TXD 0x00EC 0x03B4 0x0580 0x1 0x1
+#define MX6SLL_PAD_EPDC_PWR_CTRL2__LCD_DATA18 0x00EC 0x03B4 0x0720 0x2 0x1
+#define MX6SLL_PAD_EPDC_PWR_CTRL2__GPIO2_IO09 0x00EC 0x03B4 0x0000 0x5 0x0
+#define MX6SLL_PAD_EPDC_PWR_CTRL3__EPDC_PWR_CTRL3 0x00F0 0x03B8 0x0000 0x0 0x0
+#define MX6SLL_PAD_EPDC_PWR_CTRL3__AUD5_TXC 0x00F0 0x03B8 0x058C 0x1 0x1
+#define MX6SLL_PAD_EPDC_PWR_CTRL3__LCD_DATA19 0x00F0 0x03B8 0x0724 0x2 0x1
+#define MX6SLL_PAD_EPDC_PWR_CTRL3__GPIO2_IO10 0x00F0 0x03B8 0x0000 0x5 0x0
+#define MX6SLL_PAD_EPDC_PWR_COM__EPDC_PWR_COM 0x00F4 0x03BC 0x0000 0x0 0x0
+#define MX6SLL_PAD_EPDC_PWR_COM__LCD_DATA20 0x00F4 0x03BC 0x0728 0x2 0x1
+#define MX6SLL_PAD_EPDC_PWR_COM__USB_OTG1_ID 0x00F4 0x03BC 0x055C 0x4 0x4
+#define MX6SLL_PAD_EPDC_PWR_COM__GPIO2_IO11 0x00F4 0x03BC 0x0000 0x5 0x0
+#define MX6SLL_PAD_EPDC_PWR_COM__SD3_RESET 0x00F4 0x03BC 0x0000 0x6 0x0
+#define MX6SLL_PAD_EPDC_PWR_IRQ__EPDC_PWR_IRQ 0x00F8 0x03C0 0x0668 0x0 0x1
+#define MX6SLL_PAD_EPDC_PWR_IRQ__LCD_DATA21 0x00F8 0x03C0 0x072C 0x2 0x1
+#define MX6SLL_PAD_EPDC_PWR_IRQ__USB_OTG2_ID 0x00F8 0x03C0 0x0560 0x4 0x3
+#define MX6SLL_PAD_EPDC_PWR_IRQ__GPIO2_IO12 0x00F8 0x03C0 0x0000 0x5 0x0
+#define MX6SLL_PAD_EPDC_PWR_IRQ__SD3_VSELECT 0x00F8 0x03C0 0x0000 0x6 0x0
+#define MX6SLL_PAD_EPDC_PWR_STAT__EPDC_PWR_STAT 0x00FC 0x03C4 0x066C 0x0 0x1
+#define MX6SLL_PAD_EPDC_PWR_STAT__LCD_DATA22 0x00FC 0x03C4 0x0730 0x2 0x1
+#define MX6SLL_PAD_EPDC_PWR_STAT__ARM_EVENTI 0x00FC 0x03C4 0x0000 0x4 0x0
+#define MX6SLL_PAD_EPDC_PWR_STAT__GPIO2_IO13 0x00FC 0x03C4 0x0000 0x5 0x0
+#define MX6SLL_PAD_EPDC_PWR_STAT__SD3_WP 0x00FC 0x03C4 0x0794 0x6 0x2
+#define MX6SLL_PAD_EPDC_PWR_WAKE__EPDC_PWR_WAKE 0x0100 0x03C8 0x0000 0x0 0x0
+#define MX6SLL_PAD_EPDC_PWR_WAKE__LCD_DATA23 0x0100 0x03C8 0x0734 0x2 0x1
+#define MX6SLL_PAD_EPDC_PWR_WAKE__ARM_EVENTO 0x0100 0x03C8 0x0000 0x4 0x0
+#define MX6SLL_PAD_EPDC_PWR_WAKE__GPIO2_IO14 0x0100 0x03C8 0x0000 0x5 0x0
+#define MX6SLL_PAD_EPDC_PWR_WAKE__SD3_CD_B 0x0100 0x03C8 0x0780 0x6 0x2
+#define MX6SLL_PAD_LCD_CLK__LCD_CLK 0x0104 0x03CC 0x0000 0x0 0x0
+#define MX6SLL_PAD_LCD_CLK__LCD_WR_RWN 0x0104 0x03CC 0x0000 0x2 0x0
+#define MX6SLL_PAD_LCD_CLK__PWM4_OUT 0x0104 0x03CC 0x0000 0x4 0x0
+#define MX6SLL_PAD_LCD_CLK__GPIO2_IO15 0x0104 0x03CC 0x0000 0x5 0x0
+#define MX6SLL_PAD_LCD_ENABLE__LCD_ENABLE 0x0108 0x03D0 0x0000 0x0 0x0
+#define MX6SLL_PAD_LCD_ENABLE__LCD_RD_E 0x0108 0x03D0 0x0000 0x2 0x0
+#define MX6SLL_PAD_LCD_ENABLE__UART2_DCE_RX 0x0108 0x03D0 0x0000 0x4 0x0
+#define MX6SLL_PAD_LCD_ENABLE__UART2_DTE_TX 0x0108 0x03D0 0x0000 0x4 0x0
+#define MX6SLL_PAD_LCD_ENABLE__GPIO2_IO16 0x0108 0x03D0 0x0000 0x5 0x0
+#define MX6SLL_PAD_LCD_HSYNC__LCD_HSYNC 0x010C 0x03D4 0x06D4 0x0 0x0
+#define MX6SLL_PAD_LCD_HSYNC__LCD_CS 0x010C 0x03D4 0x0000 0x2 0x0
+#define MX6SLL_PAD_LCD_HSYNC__UART2_DCE_TX 0x010C 0x03D4 0x0000 0x4 0x0
+#define MX6SLL_PAD_LCD_HSYNC__UART2_DTE_RX 0x010C 0x03D4 0x074C 0x4 0x1
+#define MX6SLL_PAD_LCD_HSYNC__GPIO2_IO17 0x010C 0x03D4 0x0000 0x5 0x0
+#define MX6SLL_PAD_LCD_HSYNC__ARM_TRACE_CLK 0x010C 0x03D4 0x0000 0x6 0x0
+#define MX6SLL_PAD_LCD_VSYNC__LCD_VSYNC 0x0110 0x03D8 0x0000 0x0 0x0
+#define MX6SLL_PAD_LCD_VSYNC__LCD_RS 0x0110 0x03D8 0x0000 0x2 0x0
+#define MX6SLL_PAD_LCD_VSYNC__UART2_DCE_RTS 0x0110 0x03D8 0x0748 0x4 0x0
+#define MX6SLL_PAD_LCD_VSYNC__UART2_DTE_CTS 0x0110 0x03D8 0x0000 0x4 0x0
+#define MX6SLL_PAD_LCD_VSYNC__GPIO2_IO18 0x0110 0x03D8 0x0000 0x5 0x0
+#define MX6SLL_PAD_LCD_VSYNC__ARM_TRACE_CTL 0x0110 0x03D8 0x0000 0x6 0x0
+#define MX6SLL_PAD_LCD_RESET__LCD_RESET 0x0114 0x03DC 0x0000 0x0 0x0
+#define MX6SLL_PAD_LCD_RESET__LCD_BUSY 0x0114 0x03DC 0x06D4 0x2 0x1
+#define MX6SLL_PAD_LCD_RESET__UART2_DCE_CTS 0x0114 0x03DC 0x0000 0x4 0x0
+#define MX6SLL_PAD_LCD_RESET__UART2_DTE_RTS 0x0114 0x03DC 0x0748 0x4 0x1
+#define MX6SLL_PAD_LCD_RESET__GPIO2_IO19 0x0114 0x03DC 0x0000 0x5 0x0
+#define MX6SLL_PAD_LCD_RESET__CCM_PMIC_READY 0x0114 0x03DC 0x05AC 0x6 0x2
+#define MX6SLL_PAD_LCD_DATA00__LCD_DATA00 0x0118 0x03E0 0x06D8 0x0 0x1
+#define MX6SLL_PAD_LCD_DATA00__ECSPI1_MOSI 0x0118 0x03E0 0x0608 0x1 0x0
+#define MX6SLL_PAD_LCD_DATA00__USB_OTG2_ID 0x0118 0x03E0 0x0560 0x2 0x2
+#define MX6SLL_PAD_LCD_DATA00__PWM1_OUT 0x0118 0x03E0 0x0000 0x3 0x0
+#define MX6SLL_PAD_LCD_DATA00__UART5_DTR_B 0x0118 0x03E0 0x0000 0x4 0x0
+#define MX6SLL_PAD_LCD_DATA00__GPIO2_IO20 0x0118 0x03E0 0x0000 0x5 0x0
+#define MX6SLL_PAD_LCD_DATA00__ARM_TRACE00 0x0118 0x03E0 0x0000 0x6 0x0
+#define MX6SLL_PAD_LCD_DATA00__SRC_BOOT_CFG00 0x0118 0x03E0 0x0000 0x7 0x0
+#define MX6SLL_PAD_LCD_DATA01__LCD_DATA01 0x011C 0x03E4 0x06DC 0x0 0x1
+#define MX6SLL_PAD_LCD_DATA01__ECSPI1_MISO 0x011C 0x03E4 0x0604 0x1 0x0
+#define MX6SLL_PAD_LCD_DATA01__USB_OTG1_ID 0x011C 0x03E4 0x055C 0x2 0x3
+#define MX6SLL_PAD_LCD_DATA01__PWM2_OUT 0x011C 0x03E4 0x0000 0x3 0x0
+#define MX6SLL_PAD_LCD_DATA01__AUD4_RXFS 0x011C 0x03E4 0x0570 0x4 0x0
+#define MX6SLL_PAD_LCD_DATA01__GPIO2_IO21 0x011C 0x03E4 0x0000 0x5 0x0
+#define MX6SLL_PAD_LCD_DATA01__ARM_TRACE01 0x011C 0x03E4 0x0000 0x6 0x0
+#define MX6SLL_PAD_LCD_DATA01__SRC_BOOT_CFG01 0x011C 0x03E4 0x0000 0x7 0x0
+#define MX6SLL_PAD_LCD_DATA02__LCD_DATA02 0x0120 0x03E8 0x06E0 0x0 0x1
+#define MX6SLL_PAD_LCD_DATA02__ECSPI1_SS0 0x0120 0x03E8 0x0614 0x1 0x0
+#define MX6SLL_PAD_LCD_DATA02__EPIT2_OUT 0x0120 0x03E8 0x0000 0x2 0x0
+#define MX6SLL_PAD_LCD_DATA02__PWM3_OUT 0x0120 0x03E8 0x0000 0x3 0x0
+#define MX6SLL_PAD_LCD_DATA02__AUD4_RXC 0x0120 0x03E8 0x056C 0x4 0x0
+#define MX6SLL_PAD_LCD_DATA02__GPIO2_IO22 0x0120 0x03E8 0x0000 0x5 0x0
+#define MX6SLL_PAD_LCD_DATA02__ARM_TRACE02 0x0120 0x03E8 0x0000 0x6 0x0
+#define MX6SLL_PAD_LCD_DATA02__SRC_BOOT_CFG02 0x0120 0x03E8 0x0000 0x7 0x0
+#define MX6SLL_PAD_LCD_DATA03__LCD_DATA03 0x0124 0x03EC 0x06E4 0x0 0x1
+#define MX6SLL_PAD_LCD_DATA03__ECSPI1_SCLK 0x0124 0x03EC 0x05FC 0x1 0x0
+#define MX6SLL_PAD_LCD_DATA03__UART5_DSR_B 0x0124 0x03EC 0x0000 0x2 0x0
+#define MX6SLL_PAD_LCD_DATA03__PWM4_OUT 0x0124 0x03EC 0x0000 0x3 0x0
+#define MX6SLL_PAD_LCD_DATA03__AUD4_RXD 0x0124 0x03EC 0x0564 0x4 0x0
+#define MX6SLL_PAD_LCD_DATA03__GPIO2_IO23 0x0124 0x03EC 0x0000 0x5 0x0
+#define MX6SLL_PAD_LCD_DATA03__ARM_TRACE03 0x0124 0x03EC 0x0000 0x6 0x0
+#define MX6SLL_PAD_LCD_DATA03__SRC_BOOT_CFG03 0x0124 0x03EC 0x0000 0x7 0x0
+#define MX6SLL_PAD_LCD_DATA04__LCD_DATA04 0x0128 0x03F0 0x06E8 0x0 0x1
+#define MX6SLL_PAD_LCD_DATA04__ECSPI1_SS1 0x0128 0x03F0 0x060C 0x1 0x1
+#define MX6SLL_PAD_LCD_DATA04__CSI_VSYNC 0x0128 0x03F0 0x05F8 0x2 0x0
+#define MX6SLL_PAD_LCD_DATA04__WDOG2_RESET_B_DEB 0x0128 0x03F0 0x0000 0x3 0x0
+#define MX6SLL_PAD_LCD_DATA04__AUD4_TXC 0x0128 0x03F0 0x0574 0x4 0x0
+#define MX6SLL_PAD_LCD_DATA04__GPIO2_IO24 0x0128 0x03F0 0x0000 0x5 0x0
+#define MX6SLL_PAD_LCD_DATA04__ARM_TRACE04 0x0128 0x03F0 0x0000 0x6 0x0
+#define MX6SLL_PAD_LCD_DATA04__SRC_BOOT_CFG04 0x0128 0x03F0 0x0000 0x7 0x0
+#define MX6SLL_PAD_LCD_DATA05__LCD_DATA05 0x012C 0x03F4 0x06EC 0x0 0x1
+#define MX6SLL_PAD_LCD_DATA05__ECSPI1_SS2 0x012C 0x03F4 0x0610 0x1 0x1
+#define MX6SLL_PAD_LCD_DATA05__CSI_HSYNC 0x012C 0x03F4 0x05F0 0x2 0x0
+#define MX6SLL_PAD_LCD_DATA05__AUD4_TXFS 0x012C 0x03F4 0x0578 0x4 0x0
+#define MX6SLL_PAD_LCD_DATA05__GPIO2_IO25 0x012C 0x03F4 0x0000 0x5 0x0
+#define MX6SLL_PAD_LCD_DATA05__ARM_TRACE05 0x012C 0x03F4 0x0000 0x6 0x0
+#define MX6SLL_PAD_LCD_DATA05__SRC_BOOT_CFG05 0x012C 0x03F4 0x0000 0x7 0x0
+#define MX6SLL_PAD_LCD_DATA06__LCD_DATA06 0x0130 0x03F8 0x06F0 0x0 0x1
+#define MX6SLL_PAD_LCD_DATA06__ECSPI1_SS3 0x0130 0x03F8 0x0618 0x1 0x0
+#define MX6SLL_PAD_LCD_DATA06__CSI_PIXCLK 0x0130 0x03F8 0x05F4 0x2 0x0
+#define MX6SLL_PAD_LCD_DATA06__AUD4_TXD 0x0130 0x03F8 0x0568 0x4 0x0
+#define MX6SLL_PAD_LCD_DATA06__GPIO2_IO26 0x0130 0x03F8 0x0000 0x5 0x0
+#define MX6SLL_PAD_LCD_DATA06__ARM_TRACE06 0x0130 0x03F8 0x0000 0x6 0x0
+#define MX6SLL_PAD_LCD_DATA06__SRC_BOOT_CFG06 0x0130 0x03F8 0x0000 0x7 0x0
+#define MX6SLL_PAD_LCD_DATA07__LCD_DATA07 0x0134 0x03FC 0x06F4 0x0 0x0
+#define MX6SLL_PAD_LCD_DATA07__ECSPI1_RDY 0x0134 0x03FC 0x0600 0x1 0x0
+#define MX6SLL_PAD_LCD_DATA07__CSI_MCLK 0x0134 0x03FC 0x0000 0x2 0x0
+#define MX6SLL_PAD_LCD_DATA07__AUDIO_CLK_OUT 0x0134 0x03FC 0x0000 0x4 0x0
+#define MX6SLL_PAD_LCD_DATA07__GPIO2_IO27 0x0134 0x03FC 0x0000 0x5 0x0
+#define MX6SLL_PAD_LCD_DATA07__ARM_TRACE07 0x0134 0x03FC 0x0000 0x6 0x0
+#define MX6SLL_PAD_LCD_DATA07__SRC_BOOT_CFG07 0x0134 0x03FC 0x0000 0x7 0x0
+#define MX6SLL_PAD_LCD_DATA08__LCD_DATA08 0x0138 0x0400 0x06F8 0x0 0x0
+#define MX6SLL_PAD_LCD_DATA08__KEY_COL0 0x0138 0x0400 0x06A0 0x1 0x1
+#define MX6SLL_PAD_LCD_DATA08__CSI_DATA09 0x0138 0x0400 0x05EC 0x2 0x0
+#define MX6SLL_PAD_LCD_DATA08__ECSPI2_SCLK 0x0138 0x0400 0x061C 0x4 0x0
+#define MX6SLL_PAD_LCD_DATA08__GPIO2_IO28 0x0138 0x0400 0x0000 0x5 0x0
+#define MX6SLL_PAD_LCD_DATA08__ARM_TRACE08 0x0138 0x0400 0x0000 0x6 0x0
+#define MX6SLL_PAD_LCD_DATA08__SRC_BOOT_CFG08 0x0138 0x0400 0x0000 0x7 0x0
+#define MX6SLL_PAD_LCD_DATA09__LCD_DATA09 0x013C 0x0404 0x06FC 0x0 0x0
+#define MX6SLL_PAD_LCD_DATA09__KEY_ROW0 0x013C 0x0404 0x06C0 0x1 0x1
+#define MX6SLL_PAD_LCD_DATA09__CSI_DATA08 0x013C 0x0404 0x05E8 0x2 0x0
+#define MX6SLL_PAD_LCD_DATA09__ECSPI2_MOSI 0x013C 0x0404 0x0624 0x4 0x0
+#define MX6SLL_PAD_LCD_DATA09__GPIO2_IO29 0x013C 0x0404 0x0000 0x5 0x0
+#define MX6SLL_PAD_LCD_DATA09__ARM_TRACE09 0x013C 0x0404 0x0000 0x6 0x0
+#define MX6SLL_PAD_LCD_DATA09__SRC_BOOT_CFG09 0x013C 0x0404 0x0000 0x7 0x0
+#define MX6SLL_PAD_LCD_DATA10__LCD_DATA10 0x0140 0x0408 0x0700 0x0 0x1
+#define MX6SLL_PAD_LCD_DATA10__KEY_COL1 0x0140 0x0408 0x06A4 0x1 0x1
+#define MX6SLL_PAD_LCD_DATA10__CSI_DATA07 0x0140 0x0408 0x05E4 0x2 0x0
+#define MX6SLL_PAD_LCD_DATA10__ECSPI2_MISO 0x0140 0x0408 0x0620 0x4 0x0
+#define MX6SLL_PAD_LCD_DATA10__GPIO2_IO30 0x0140 0x0408 0x0000 0x5 0x0
+#define MX6SLL_PAD_LCD_DATA10__ARM_TRACE10 0x0140 0x0408 0x0000 0x6 0x0
+#define MX6SLL_PAD_LCD_DATA10__SRC_BOOT_CFG10 0x0140 0x0408 0x0000 0x7 0x0
+#define MX6SLL_PAD_LCD_DATA11__LCD_DATA11 0x0144 0x040C 0x0704 0x0 0x0
+#define MX6SLL_PAD_LCD_DATA11__KEY_ROW1 0x0144 0x040C 0x06C4 0x1 0x1
+#define MX6SLL_PAD_LCD_DATA11__CSI_DATA06 0x0144 0x040C 0x05E0 0x2 0x0
+#define MX6SLL_PAD_LCD_DATA11__ECSPI2_SS1 0x0144 0x040C 0x062C 0x4 0x0
+#define MX6SLL_PAD_LCD_DATA11__GPIO2_IO31 0x0144 0x040C 0x0000 0x5 0x0
+#define MX6SLL_PAD_LCD_DATA11__ARM_TRACE11 0x0144 0x040C 0x0000 0x6 0x0
+#define MX6SLL_PAD_LCD_DATA11__SRC_BOOT_CFG11 0x0144 0x040C 0x0000 0x7 0x0
+#define MX6SLL_PAD_LCD_DATA12__LCD_DATA12 0x0148 0x0410 0x0708 0x0 0x0
+#define MX6SLL_PAD_LCD_DATA12__KEY_COL2 0x0148 0x0410 0x06A8 0x1 0x1
+#define MX6SLL_PAD_LCD_DATA12__CSI_DATA05 0x0148 0x0410 0x05DC 0x2 0x0
+#define MX6SLL_PAD_LCD_DATA12__UART5_DCE_RTS 0x0148 0x0410 0x0760 0x4 0x0
+#define MX6SLL_PAD_LCD_DATA12__UART5_DTE_CTS 0x0148 0x0410 0x0000 0x4 0x0
+#define MX6SLL_PAD_LCD_DATA12__GPIO3_IO00 0x0148 0x0410 0x0000 0x5 0x0
+#define MX6SLL_PAD_LCD_DATA12__ARM_TRACE12 0x0148 0x0410 0x0000 0x6 0x0
+#define MX6SLL_PAD_LCD_DATA12__SRC_BOOT_CFG12 0x0148 0x0410 0x0000 0x7 0x0
+#define MX6SLL_PAD_LCD_DATA13__LCD_DATA13 0x014C 0x0414 0x070C 0x0 0x0
+#define MX6SLL_PAD_LCD_DATA13__KEY_ROW2 0x014C 0x0414 0x06C8 0x1 0x1
+#define MX6SLL_PAD_LCD_DATA13__CSI_DATA04 0x014C 0x0414 0x05D8 0x2 0x0
+#define MX6SLL_PAD_LCD_DATA13__UART5_DCE_CTS 0x014C 0x0414 0x0000 0x4 0x0
+#define MX6SLL_PAD_LCD_DATA13__UART5_DTE_RTS 0x014C 0x0414 0x0760 0x4 0x1
+#define MX6SLL_PAD_LCD_DATA13__GPIO3_IO01 0x014C 0x0414 0x0000 0x5 0x0
+#define MX6SLL_PAD_LCD_DATA13__ARM_TRACE13 0x014C 0x0414 0x0000 0x6 0x0
+#define MX6SLL_PAD_LCD_DATA13__SRC_BOOT_CFG13 0x014C 0x0414 0x0000 0x7 0x0
+#define MX6SLL_PAD_LCD_DATA14__LCD_DATA14 0x0150 0x0418 0x0710 0x0 0x0
+#define MX6SLL_PAD_LCD_DATA14__KEY_COL3 0x0150 0x0418 0x06AC 0x1 0x1
+#define MX6SLL_PAD_LCD_DATA14__CSI_DATA03 0x0150 0x0418 0x05D4 0x2 0x0
+#define MX6SLL_PAD_LCD_DATA14__UART5_DCE_RX 0x0150 0x0418 0x0764 0x4 0x0
+#define MX6SLL_PAD_LCD_DATA14__UART5_DTE_TX 0x0150 0x0418 0x0000 0x4 0x0
+#define MX6SLL_PAD_LCD_DATA14__GPIO3_IO02 0x0150 0x0418 0x0000 0x5 0x0
+#define MX6SLL_PAD_LCD_DATA14__ARM_TRACE14 0x0150 0x0418 0x0000 0x6 0x0
+#define MX6SLL_PAD_LCD_DATA14__SRC_BOOT_CFG14 0x0150 0x0418 0x0000 0x7 0x0
+#define MX6SLL_PAD_LCD_DATA15__LCD_DATA15 0x0154 0x041C 0x0714 0x0 0x0
+#define MX6SLL_PAD_LCD_DATA15__KEY_ROW3 0x0154 0x041C 0x06CC 0x1 0x0
+#define MX6SLL_PAD_LCD_DATA15__CSI_DATA02 0x0154 0x041C 0x05D0 0x2 0x0
+#define MX6SLL_PAD_LCD_DATA15__UART5_DCE_TX 0x0154 0x041C 0x0000 0x4 0x0
+#define MX6SLL_PAD_LCD_DATA15__UART5_DTE_RX 0x0154 0x041C 0x0764 0x4 0x1
+#define MX6SLL_PAD_LCD_DATA15__GPIO3_IO03 0x0154 0x041C 0x0000 0x5 0x0
+#define MX6SLL_PAD_LCD_DATA15__ARM_TRACE15 0x0154 0x041C 0x0000 0x6 0x0
+#define MX6SLL_PAD_LCD_DATA15__SRC_BOOT_CFG15 0x0154 0x041C 0x0000 0x7 0x0
+#define MX6SLL_PAD_LCD_DATA16__LCD_DATA16 0x0158 0x0420 0x0718 0x0 0x0
+#define MX6SLL_PAD_LCD_DATA16__KEY_COL4 0x0158 0x0420 0x06B0 0x1 0x0
+#define MX6SLL_PAD_LCD_DATA16__CSI_DATA01 0x0158 0x0420 0x05CC 0x2 0x0
+#define MX6SLL_PAD_LCD_DATA16__I2C2_SCL 0x0158 0x0420 0x0684 0x4 0x1
+#define MX6SLL_PAD_LCD_DATA16__GPIO3_IO04 0x0158 0x0420 0x0000 0x5 0x0
+#define MX6SLL_PAD_LCD_DATA16__SRC_BOOT_CFG24 0x0158 0x0420 0x0000 0x7 0x0
+#define MX6SLL_PAD_LCD_DATA17__LCD_DATA17 0x015C 0x0424 0x071C 0x0 0x0
+#define MX6SLL_PAD_LCD_DATA17__KEY_ROW4 0x015C 0x0424 0x06D0 0x1 0x0
+#define MX6SLL_PAD_LCD_DATA17__CSI_DATA00 0x015C 0x0424 0x05C8 0x2 0x0
+#define MX6SLL_PAD_LCD_DATA17__I2C2_SDA 0x015C 0x0424 0x0688 0x4 0x1
+#define MX6SLL_PAD_LCD_DATA17__GPIO3_IO05 0x015C 0x0424 0x0000 0x5 0x0
+#define MX6SLL_PAD_LCD_DATA17__SRC_BOOT_CFG25 0x015C 0x0424 0x0000 0x7 0x0
+#define MX6SLL_PAD_LCD_DATA18__LCD_DATA18 0x0160 0x0428 0x0720 0x0 0x0
+#define MX6SLL_PAD_LCD_DATA18__KEY_COL5 0x0160 0x0428 0x0694 0x1 0x2
+#define MX6SLL_PAD_LCD_DATA18__CSI_DATA15 0x0160 0x0428 0x05C4 0x2 0x1
+#define MX6SLL_PAD_LCD_DATA18__GPT_CAPTURE1 0x0160 0x0428 0x0670 0x4 0x1
+#define MX6SLL_PAD_LCD_DATA18__GPIO3_IO06 0x0160 0x0428 0x0000 0x5 0x0
+#define MX6SLL_PAD_LCD_DATA18__SRC_BOOT_CFG26 0x0160 0x0428 0x0000 0x7 0x0
+#define MX6SLL_PAD_LCD_DATA19__LCD_DATA19 0x0164 0x042C 0x0724 0x0 0x0
+#define MX6SLL_PAD_LCD_DATA19__KEY_ROW5 0x0164 0x042C 0x06B4 0x1 0x1
+#define MX6SLL_PAD_LCD_DATA19__CSI_DATA14 0x0164 0x042C 0x05C0 0x2 0x2
+#define MX6SLL_PAD_LCD_DATA19__GPT_CAPTURE2 0x0164 0x042C 0x0674 0x4 0x1
+#define MX6SLL_PAD_LCD_DATA19__GPIO3_IO07 0x0164 0x042C 0x0000 0x5 0x0
+#define MX6SLL_PAD_LCD_DATA19__SRC_BOOT_CFG27 0x0164 0x042C 0x0000 0x7 0x0
+#define MX6SLL_PAD_LCD_DATA20__LCD_DATA20 0x0168 0x0430 0x0728 0x0 0x0
+#define MX6SLL_PAD_LCD_DATA20__KEY_COL6 0x0168 0x0430 0x0698 0x1 0x1
+#define MX6SLL_PAD_LCD_DATA20__CSI_DATA13 0x0168 0x0430 0x05BC 0x2 0x2
+#define MX6SLL_PAD_LCD_DATA20__GPT_COMPARE1 0x0168 0x0430 0x0000 0x4 0x0
+#define MX6SLL_PAD_LCD_DATA20__GPIO3_IO08 0x0168 0x0430 0x0000 0x5 0x0
+#define MX6SLL_PAD_LCD_DATA20__SRC_BOOT_CFG28 0x0168 0x0430 0x0000 0x7 0x0
+#define MX6SLL_PAD_LCD_DATA21__LCD_DATA21 0x016C 0x0434 0x072C 0x0 0x0
+#define MX6SLL_PAD_LCD_DATA21__KEY_ROW6 0x016C 0x0434 0x06B8 0x1 0x1
+#define MX6SLL_PAD_LCD_DATA21__CSI_DATA12 0x016C 0x0434 0x05B8 0x2 0x2
+#define MX6SLL_PAD_LCD_DATA21__GPT_COMPARE2 0x016C 0x0434 0x0000 0x4 0x0
+#define MX6SLL_PAD_LCD_DATA21__GPIO3_IO09 0x016C 0x0434 0x0000 0x5 0x0
+#define MX6SLL_PAD_LCD_DATA21__SRC_BOOT_CFG29 0x016C 0x0434 0x0000 0x7 0x0
+#define MX6SLL_PAD_LCD_DATA22__LCD_DATA22 0x0170 0x0438 0x0730 0x0 0x0
+#define MX6SLL_PAD_LCD_DATA22__KEY_COL7 0x0170 0x0438 0x069C 0x1 0x1
+#define MX6SLL_PAD_LCD_DATA22__CSI_DATA11 0x0170 0x0438 0x05B4 0x2 0x1
+#define MX6SLL_PAD_LCD_DATA22__GPT_COMPARE3 0x0170 0x0438 0x0000 0x4 0x0
+#define MX6SLL_PAD_LCD_DATA22__GPIO3_IO10 0x0170 0x0438 0x0000 0x5 0x0
+#define MX6SLL_PAD_LCD_DATA22__SRC_BOOT_CFG30 0x0170 0x0438 0x0000 0x7 0x0
+#define MX6SLL_PAD_LCD_DATA23__LCD_DATA23 0x0174 0x043C 0x0734 0x0 0x0
+#define MX6SLL_PAD_LCD_DATA23__KEY_ROW7 0x0174 0x043C 0x06BC 0x1 0x1
+#define MX6SLL_PAD_LCD_DATA23__CSI_DATA10 0x0174 0x043C 0x05B0 0x2 0x1
+#define MX6SLL_PAD_LCD_DATA23__GPT_CLKIN 0x0174 0x043C 0x0678 0x4 0x1
+#define MX6SLL_PAD_LCD_DATA23__GPIO3_IO11 0x0174 0x043C 0x0000 0x5 0x0
+#define MX6SLL_PAD_LCD_DATA23__SRC_BOOT_CFG31 0x0174 0x043C 0x0000 0x7 0x0
+#define MX6SLL_PAD_AUD_RXFS__AUD3_RXFS 0x0178 0x0440 0x0000 0x0 0x0
+#define MX6SLL_PAD_AUD_RXFS__I2C1_SCL 0x0178 0x0440 0x067C 0x1 0x1
+#define MX6SLL_PAD_AUD_RXFS__UART3_DCE_RX 0x0178 0x0440 0x0754 0x2 0x0
+#define MX6SLL_PAD_AUD_RXFS__UART3_DTE_TX 0x0178 0x0440 0x0000 0x2 0x0
+#define MX6SLL_PAD_AUD_RXFS__I2C3_SCL 0x0178 0x0440 0x068C 0x4 0x1
+#define MX6SLL_PAD_AUD_RXFS__GPIO1_IO00 0x0178 0x0440 0x0000 0x5 0x0
+#define MX6SLL_PAD_AUD_RXFS__ECSPI3_SS0 0x0178 0x0440 0x0648 0x6 0x0
+#define MX6SLL_PAD_AUD_RXFS__MBIST_BEND 0x0178 0x0440 0x0000 0x7 0x0
+#define MX6SLL_PAD_AUD_RXC__AUD3_RXC 0x017C 0x0444 0x0000 0x0 0x0
+#define MX6SLL_PAD_AUD_RXC__I2C1_SDA 0x017C 0x0444 0x0680 0x1 0x1
+#define MX6SLL_PAD_AUD_RXC__UART3_DCE_TX 0x017C 0x0444 0x0000 0x2 0x0
+#define MX6SLL_PAD_AUD_RXC__UART3_DTE_RX 0x017C 0x0444 0x0754 0x2 0x1
+#define MX6SLL_PAD_AUD_RXC__I2C3_SDA 0x017C 0x0444 0x0690 0x4 0x1
+#define MX6SLL_PAD_AUD_RXC__GPIO1_IO01 0x017C 0x0444 0x0000 0x5 0x0
+#define MX6SLL_PAD_AUD_RXC__ECSPI3_SS1 0x017C 0x0444 0x064C 0x6 0x0
+#define MX6SLL_PAD_AUD_RXD__AUD3_RXD 0x0180 0x0448 0x0000 0x0 0x0
+#define MX6SLL_PAD_AUD_RXD__ECSPI3_MOSI 0x0180 0x0448 0x063C 0x1 0x0
+#define MX6SLL_PAD_AUD_RXD__UART4_DCE_RX 0x0180 0x0448 0x075C 0x2 0x0
+#define MX6SLL_PAD_AUD_RXD__UART4_DTE_TX 0x0180 0x0448 0x0000 0x2 0x0
+#define MX6SLL_PAD_AUD_RXD__SD1_LCTL 0x0180 0x0448 0x0000 0x4 0x0
+#define MX6SLL_PAD_AUD_RXD__GPIO1_IO02 0x0180 0x0448 0x0000 0x5 0x0
+#define MX6SLL_PAD_AUD_TXC__AUD3_TXC 0x0184 0x044C 0x0000 0x0 0x0
+#define MX6SLL_PAD_AUD_TXC__ECSPI3_MISO 0x0184 0x044C 0x0638 0x1 0x0
+#define MX6SLL_PAD_AUD_TXC__UART4_DCE_TX 0x0184 0x044C 0x0000 0x2 0x0
+#define MX6SLL_PAD_AUD_TXC__UART4_DTE_RX 0x0184 0x044C 0x075C 0x2 0x1
+#define MX6SLL_PAD_AUD_TXC__SD2_LCTL 0x0184 0x044C 0x0000 0x4 0x0
+#define MX6SLL_PAD_AUD_TXC__GPIO1_IO03 0x0184 0x044C 0x0000 0x5 0x0
+#define MX6SLL_PAD_AUD_TXFS__AUD3_TXFS 0x0188 0x0450 0x0000 0x0 0x0
+#define MX6SLL_PAD_AUD_TXFS__PWM3_OUT 0x0188 0x0450 0x0000 0x1 0x0
+#define MX6SLL_PAD_AUD_TXFS__UART4_DCE_RTS 0x0188 0x0450 0x0758 0x2 0x0
+#define MX6SLL_PAD_AUD_TXFS__UART4_DTE_CTS 0x0188 0x0450 0x0000 0x2 0x0
+#define MX6SLL_PAD_AUD_TXFS__SD3_LCTL 0x0188 0x0450 0x0000 0x4 0x0
+#define MX6SLL_PAD_AUD_TXFS__GPIO1_IO04 0x0188 0x0450 0x0000 0x5 0x0
+#define MX6SLL_PAD_AUD_TXD__AUD3_TXD 0x018C 0x0454 0x0000 0x0 0x0
+#define MX6SLL_PAD_AUD_TXD__ECSPI3_SCLK 0x018C 0x0454 0x0630 0x1 0x0
+#define MX6SLL_PAD_AUD_TXD__UART4_DCE_CTS 0x018C 0x0454 0x0000 0x2 0x0
+#define MX6SLL_PAD_AUD_TXD__UART4_DTE_RTS 0x018C 0x0454 0x0758 0x2 0x1
+#define MX6SLL_PAD_AUD_TXD__GPIO1_IO05 0x018C 0x0454 0x0000 0x5 0x0
+#define MX6SLL_PAD_AUD_MCLK__AUDIO_CLK_OUT 0x0190 0x0458 0x0000 0x0 0x0
+#define MX6SLL_PAD_AUD_MCLK__PWM4_OUT 0x0190 0x0458 0x0000 0x1 0x0
+#define MX6SLL_PAD_AUD_MCLK__ECSPI3_RDY 0x0190 0x0458 0x0634 0x2 0x0
+#define MX6SLL_PAD_AUD_MCLK__WDOG2_RESET_B_DEB 0x0190 0x0458 0x0000 0x4 0x0
+#define MX6SLL_PAD_AUD_MCLK__GPIO1_IO06 0x0190 0x0458 0x0000 0x5 0x0
+#define MX6SLL_PAD_AUD_MCLK__SPDIF_EXT_CLK 0x0190 0x0458 0x073C 0x6 0x1
+#define MX6SLL_PAD_UART1_RXD__UART1_DCE_RX 0x0194 0x045C 0x0744 0x0 0x0
+#define MX6SLL_PAD_UART1_RXD__UART1_DTE_TX 0x0194 0x045C 0x0000 0x0 0x0
+#define MX6SLL_PAD_UART1_RXD__PWM1_OUT 0x0194 0x045C 0x0000 0x1 0x0
+#define MX6SLL_PAD_UART1_RXD__UART4_DCE_RX 0x0194 0x045C 0x075C 0x2 0x4
+#define MX6SLL_PAD_UART1_RXD__UART4_DTE_TX 0x0194 0x045C 0x0000 0x2 0x0
+#define MX6SLL_PAD_UART1_RXD__UART5_DCE_RX 0x0194 0x045C 0x0764 0x4 0x6
+#define MX6SLL_PAD_UART1_RXD__UART5_DTE_TX 0x0194 0x045C 0x0000 0x4 0x0
+#define MX6SLL_PAD_UART1_RXD__GPIO3_IO16 0x0194 0x045C 0x0000 0x5 0x0
+#define MX6SLL_PAD_UART1_TXD__UART1_DCE_TX 0x0198 0x0460 0x0000 0x0 0x0
+#define MX6SLL_PAD_UART1_TXD__UART1_DTE_RX 0x0198 0x0460 0x0744 0x0 0x1
+#define MX6SLL_PAD_UART1_TXD__PWM2_OUT 0x0198 0x0460 0x0000 0x1 0x0
+#define MX6SLL_PAD_UART1_TXD__UART4_DCE_TX 0x0198 0x0460 0x0000 0x2 0x0
+#define MX6SLL_PAD_UART1_TXD__UART4_DTE_RX 0x0198 0x0460 0x075C 0x2 0x5
+#define MX6SLL_PAD_UART1_TXD__UART5_DCE_TX 0x0198 0x0460 0x0000 0x4 0x0
+#define MX6SLL_PAD_UART1_TXD__UART5_DTE_RX 0x0198 0x0460 0x0764 0x4 0x7
+#define MX6SLL_PAD_UART1_TXD__GPIO3_IO17 0x0198 0x0460 0x0000 0x5 0x0
+#define MX6SLL_PAD_UART1_TXD__UART5_DCD_B 0x0198 0x0460 0x0000 0x7 0x0
+#define MX6SLL_PAD_I2C1_SCL__I2C1_SCL 0x019C 0x0464 0x067C 0x0 0x0
+#define MX6SLL_PAD_I2C1_SCL__UART1_DCE_RTS 0x019C 0x0464 0x0740 0x1 0x0
+#define MX6SLL_PAD_I2C1_SCL__UART1_DTE_CTS 0x019C 0x0464 0x0000 0x1 0x0
+#define MX6SLL_PAD_I2C1_SCL__ECSPI3_SS2 0x019C 0x0464 0x0640 0x2 0x0
+#define MX6SLL_PAD_I2C1_SCL__SD3_RESET 0x019C 0x0464 0x0000 0x4 0x0
+#define MX6SLL_PAD_I2C1_SCL__GPIO3_IO12 0x019C 0x0464 0x0000 0x5 0x0
+#define MX6SLL_PAD_I2C1_SCL__ECSPI1_SS1 0x019C 0x0464 0x060C 0x6 0x0
+#define MX6SLL_PAD_I2C1_SDA__I2C1_SDA 0x01A0 0x0468 0x0680 0x0 0x0
+#define MX6SLL_PAD_I2C1_SDA__UART1_DCE_CTS 0x01A0 0x0468 0x0000 0x1 0x0
+#define MX6SLL_PAD_I2C1_SDA__UART1_DTE_RTS 0x01A0 0x0468 0x0740 0x1 0x1
+#define MX6SLL_PAD_I2C1_SDA__ECSPI3_SS3 0x01A0 0x0468 0x0644 0x2 0x0
+#define MX6SLL_PAD_I2C1_SDA__SD3_VSELECT 0x01A0 0x0468 0x0000 0x4 0x0
+#define MX6SLL_PAD_I2C1_SDA__GPIO3_IO13 0x01A0 0x0468 0x0000 0x5 0x0
+#define MX6SLL_PAD_I2C1_SDA__ECSPI1_SS2 0x01A0 0x0468 0x0610 0x6 0x0
+#define MX6SLL_PAD_I2C2_SCL__I2C2_SCL 0x01A4 0x046C 0x0684 0x0 0x3
+#define MX6SLL_PAD_I2C2_SCL__AUD4_RXFS 0x01A4 0x046C 0x0570 0x1 0x2
+#define MX6SLL_PAD_I2C2_SCL__SPDIF_IN 0x01A4 0x046C 0x0738 0x2 0x2
+#define MX6SLL_PAD_I2C2_SCL__SD3_WP 0x01A4 0x046C 0x0794 0x4 0x3
+#define MX6SLL_PAD_I2C2_SCL__GPIO3_IO14 0x01A4 0x046C 0x0000 0x5 0x0
+#define MX6SLL_PAD_I2C2_SCL__ECSPI1_RDY 0x01A4 0x046C 0x0600 0x6 0x1
+#define MX6SLL_PAD_I2C2_SDA__I2C2_SDA 0x01A8 0x0470 0x0688 0x0 0x3
+#define MX6SLL_PAD_I2C2_SDA__AUD4_RXC 0x01A8 0x0470 0x056C 0x1 0x2
+#define MX6SLL_PAD_I2C2_SDA__SPDIF_OUT 0x01A8 0x0470 0x0000 0x2 0x0
+#define MX6SLL_PAD_I2C2_SDA__SD3_CD_B 0x01A8 0x0470 0x0780 0x4 0x3
+#define MX6SLL_PAD_I2C2_SDA__GPIO3_IO15 0x01A8 0x0470 0x0000 0x5 0x0
+#define MX6SLL_PAD_ECSPI1_SCLK__ECSPI1_SCLK 0x01AC 0x0474 0x05FC 0x0 0x1
+#define MX6SLL_PAD_ECSPI1_SCLK__AUD4_TXD 0x01AC 0x0474 0x0568 0x1 0x1
+#define MX6SLL_PAD_ECSPI1_SCLK__UART5_DCE_RX 0x01AC 0x0474 0x0764 0x2 0x2
+#define MX6SLL_PAD_ECSPI1_SCLK__UART5_DTE_TX 0x01AC 0x0474 0x0000 0x2 0x0
+#define MX6SLL_PAD_ECSPI1_SCLK__EPDC_VCOM0 0x01AC 0x0474 0x0000 0x3 0x0
+#define MX6SLL_PAD_ECSPI1_SCLK__SD2_RESET 0x01AC 0x0474 0x0000 0x4 0x0
+#define MX6SLL_PAD_ECSPI1_SCLK__GPIO4_IO08 0x01AC 0x0474 0x0000 0x5 0x0
+#define MX6SLL_PAD_ECSPI1_SCLK__USB_OTG2_OC 0x01AC 0x0474 0x0768 0x6 0x1
+#define MX6SLL_PAD_ECSPI1_MOSI__ECSPI1_MOSI 0x01B0 0x0478 0x0608 0x0 0x1
+#define MX6SLL_PAD_ECSPI1_MOSI__AUD4_TXC 0x01B0 0x0478 0x0574 0x1 0x1
+#define MX6SLL_PAD_ECSPI1_MOSI__UART5_DCE_TX 0x01B0 0x0478 0x0000 0x2 0x0
+#define MX6SLL_PAD_ECSPI1_MOSI__UART5_DTE_RX 0x01B0 0x0478 0x0764 0x2 0x3
+#define MX6SLL_PAD_ECSPI1_MOSI__EPDC_VCOM1 0x01B0 0x0478 0x0000 0x3 0x0
+#define MX6SLL_PAD_ECSPI1_MOSI__SD2_VSELECT 0x01B0 0x0478 0x0000 0x4 0x0
+#define MX6SLL_PAD_ECSPI1_MOSI__GPIO4_IO09 0x01B0 0x0478 0x0000 0x5 0x0
+#define MX6SLL_PAD_ECSPI1_MISO__ECSPI1_MISO 0x01B4 0x047C 0x0604 0x0 0x1
+#define MX6SLL_PAD_ECSPI1_MISO__AUD4_TXFS 0x01B4 0x047C 0x0578 0x1 0x1
+#define MX6SLL_PAD_ECSPI1_MISO__UART5_DCE_RTS 0x01B4 0x047C 0x0760 0x2 0x2
+#define MX6SLL_PAD_ECSPI1_MISO__UART5_DTE_CTS 0x01B4 0x047C 0x0000 0x2 0x0
+#define MX6SLL_PAD_ECSPI1_MISO__EPDC_BDR0 0x01B4 0x047C 0x0000 0x3 0x0
+#define MX6SLL_PAD_ECSPI1_MISO__SD2_WP 0x01B4 0x047C 0x077C 0x4 0x0
+#define MX6SLL_PAD_ECSPI1_MISO__GPIO4_IO10 0x01B4 0x047C 0x0000 0x5 0x0
+#define MX6SLL_PAD_ECSPI1_SS0__ECSPI1_SS0 0x01B8 0x0480 0x0614 0x0 0x1
+#define MX6SLL_PAD_ECSPI1_SS0__AUD4_RXD 0x01B8 0x0480 0x0564 0x1 0x1
+#define MX6SLL_PAD_ECSPI1_SS0__UART5_DCE_CTS 0x01B8 0x0480 0x0000 0x2 0x0
+#define MX6SLL_PAD_ECSPI1_SS0__UART5_DTE_RTS 0x01B8 0x0480 0x0760 0x2 0x3
+#define MX6SLL_PAD_ECSPI1_SS0__EPDC_BDR1 0x01B8 0x0480 0x0000 0x3 0x0
+#define MX6SLL_PAD_ECSPI1_SS0__SD2_CD_B 0x01B8 0x0480 0x0778 0x4 0x0
+#define MX6SLL_PAD_ECSPI1_SS0__GPIO4_IO11 0x01B8 0x0480 0x0000 0x5 0x0
+#define MX6SLL_PAD_ECSPI1_SS0__USB_OTG2_PWR 0x01B8 0x0480 0x0000 0x6 0x0
+#define MX6SLL_PAD_ECSPI2_SCLK__ECSPI2_SCLK 0x01BC 0x0484 0x061C 0x0 0x1
+#define MX6SLL_PAD_ECSPI2_SCLK__SPDIF_EXT_CLK 0x01BC 0x0484 0x073C 0x1 0x2
+#define MX6SLL_PAD_ECSPI2_SCLK__UART3_DCE_RX 0x01BC 0x0484 0x0754 0x2 0x2
+#define MX6SLL_PAD_ECSPI2_SCLK__UART3_DTE_TX 0x01BC 0x0484 0x0000 0x2 0x0
+#define MX6SLL_PAD_ECSPI2_SCLK__CSI_PIXCLK 0x01BC 0x0484 0x05F4 0x3 0x1
+#define MX6SLL_PAD_ECSPI2_SCLK__SD1_RESET 0x01BC 0x0484 0x0000 0x4 0x0
+#define MX6SLL_PAD_ECSPI2_SCLK__GPIO4_IO12 0x01BC 0x0484 0x0000 0x5 0x0
+#define MX6SLL_PAD_ECSPI2_SCLK__USB_OTG2_OC 0x01BC 0x0484 0x0768 0x6 0x2
+#define MX6SLL_PAD_ECSPI2_MOSI__ECSPI2_MOSI 0x01C0 0x0488 0x0624 0x0 0x1
+#define MX6SLL_PAD_ECSPI2_MOSI__SDMA_EXT_EVENT1 0x01C0 0x0488 0x0000 0x1 0x0
+#define MX6SLL_PAD_ECSPI2_MOSI__UART3_DCE_TX 0x01C0 0x0488 0x0000 0x2 0x0
+#define MX6SLL_PAD_ECSPI2_MOSI__UART3_DTE_RX 0x01C0 0x0488 0x0754 0x2 0x3
+#define MX6SLL_PAD_ECSPI2_MOSI__CSI_HSYNC 0x01C0 0x0488 0x05F0 0x3 0x1
+#define MX6SLL_PAD_ECSPI2_MOSI__SD1_VSELECT 0x01C0 0x0488 0x0000 0x4 0x0
+#define MX6SLL_PAD_ECSPI2_MOSI__GPIO4_IO13 0x01C0 0x0488 0x0000 0x5 0x0
+#define MX6SLL_PAD_ECSPI2_MISO__ECSPI2_MISO 0x01C4 0x048C 0x0620 0x0 0x1
+#define MX6SLL_PAD_ECSPI2_MISO__SDMA_EXT_EVENT0 0x01C4 0x048C 0x0000 0x1 0x0
+#define MX6SLL_PAD_ECSPI2_MISO__UART3_DCE_RTS 0x01C4 0x048C 0x0750 0x2 0x0
+#define MX6SLL_PAD_ECSPI2_MISO__UART3_DTE_CTS 0x01C4 0x048C 0x0000 0x2 0x0
+#define MX6SLL_PAD_ECSPI2_MISO__CSI_MCLK 0x01C4 0x048C 0x0000 0x3 0x0
+#define MX6SLL_PAD_ECSPI2_MISO__SD1_WP 0x01C4 0x048C 0x0774 0x4 0x2
+#define MX6SLL_PAD_ECSPI2_MISO__GPIO4_IO14 0x01C4 0x048C 0x0000 0x5 0x0
+#define MX6SLL_PAD_ECSPI2_MISO__USB_OTG1_OC 0x01C4 0x048C 0x076C 0x6 0x1
+#define MX6SLL_PAD_ECSPI2_SS0__ECSPI2_SS0 0x01C8 0x0490 0x0628 0x0 0x0
+#define MX6SLL_PAD_ECSPI2_SS0__ECSPI1_SS3 0x01C8 0x0490 0x0618 0x1 0x1
+#define MX6SLL_PAD_ECSPI2_SS0__UART3_DCE_CTS 0x01C8 0x0490 0x0000 0x2 0x0
+#define MX6SLL_PAD_ECSPI2_SS0__UART3_DTE_RTS 0x01C8 0x0490 0x0750 0x2 0x1
+#define MX6SLL_PAD_ECSPI2_SS0__CSI_VSYNC 0x01C8 0x0490 0x05F8 0x3 0x1
+#define MX6SLL_PAD_ECSPI2_SS0__SD1_CD_B 0x01C8 0x0490 0x0770 0x4 0x2
+#define MX6SLL_PAD_ECSPI2_SS0__GPIO4_IO15 0x01C8 0x0490 0x0000 0x5 0x0
+#define MX6SLL_PAD_ECSPI2_SS0__USB_OTG1_PWR 0x01C8 0x0490 0x0000 0x6 0x0
+#define MX6SLL_PAD_SD1_CLK__SD1_CLK 0x01CC 0x0494 0x0000 0x0 0x0
+#define MX6SLL_PAD_SD1_CLK__KEY_COL0 0x01CC 0x0494 0x06A0 0x2 0x2
+#define MX6SLL_PAD_SD1_CLK__EPDC_SDCE4 0x01CC 0x0494 0x0000 0x3 0x0
+#define MX6SLL_PAD_SD1_CLK__GPIO5_IO15 0x01CC 0x0494 0x0000 0x5 0x0
+#define MX6SLL_PAD_SD1_CMD__SD1_CMD 0x01D0 0x0498 0x0000 0x0 0x0
+#define MX6SLL_PAD_SD1_CMD__KEY_ROW0 0x01D0 0x0498 0x06C0 0x2 0x2
+#define MX6SLL_PAD_SD1_CMD__EPDC_SDCE5 0x01D0 0x0498 0x0000 0x3 0x0
+#define MX6SLL_PAD_SD1_CMD__GPIO5_IO14 0x01D0 0x0498 0x0000 0x5 0x0
+#define MX6SLL_PAD_SD1_DATA0__SD1_DATA0 0x01D4 0x049C 0x0000 0x0 0x0
+#define MX6SLL_PAD_SD1_DATA0__KEY_COL1 0x01D4 0x049C 0x06A4 0x2 0x2
+#define MX6SLL_PAD_SD1_DATA0__EPDC_SDCE6 0x01D4 0x049C 0x0000 0x3 0x0
+#define MX6SLL_PAD_SD1_DATA0__GPIO5_IO11 0x01D4 0x049C 0x0000 0x5 0x0
+#define MX6SLL_PAD_SD1_DATA1__SD1_DATA1 0x01D8 0x04A0 0x0000 0x0 0x0
+#define MX6SLL_PAD_SD1_DATA1__KEY_ROW1 0x01D8 0x04A0 0x06C4 0x2 0x2
+#define MX6SLL_PAD_SD1_DATA1__EPDC_SDCE7 0x01D8 0x04A0 0x0000 0x3 0x0
+#define MX6SLL_PAD_SD1_DATA1__GPIO5_IO08 0x01D8 0x04A0 0x0000 0x5 0x0
+#define MX6SLL_PAD_SD1_DATA2__SD1_DATA2 0x01DC 0x04A4 0x0000 0x0 0x0
+#define MX6SLL_PAD_SD1_DATA2__KEY_COL2 0x01DC 0x04A4 0x06A8 0x2 0x2
+#define MX6SLL_PAD_SD1_DATA2__EPDC_SDCE8 0x01DC 0x04A4 0x0000 0x3 0x0
+#define MX6SLL_PAD_SD1_DATA2__GPIO5_IO13 0x01DC 0x04A4 0x0000 0x5 0x0
+#define MX6SLL_PAD_SD1_DATA3__SD1_DATA3 0x01E0 0x04A8 0x0000 0x0 0x0
+#define MX6SLL_PAD_SD1_DATA3__KEY_ROW2 0x01E0 0x04A8 0x06C8 0x2 0x2
+#define MX6SLL_PAD_SD1_DATA3__EPDC_SDCE9 0x01E0 0x04A8 0x0000 0x3 0x0
+#define MX6SLL_PAD_SD1_DATA3__GPIO5_IO06 0x01E0 0x04A8 0x0000 0x5 0x0
+#define MX6SLL_PAD_SD1_DATA4__SD1_DATA4 0x01E4 0x04AC 0x0000 0x0 0x0
+#define MX6SLL_PAD_SD1_DATA4__KEY_COL3 0x01E4 0x04AC 0x06AC 0x2 0x2
+#define MX6SLL_PAD_SD1_DATA4__EPDC_SDCLK_N 0x01E4 0x04AC 0x0000 0x3 0x0
+#define MX6SLL_PAD_SD1_DATA4__UART4_DCE_RX 0x01E4 0x04AC 0x075C 0x4 0x6
+#define MX6SLL_PAD_SD1_DATA4__UART4_DTE_TX 0x01E4 0x04AC 0x0000 0x4 0x0
+#define MX6SLL_PAD_SD1_DATA4__GPIO5_IO12 0x01E4 0x04AC 0x0000 0x5 0x0
+#define MX6SLL_PAD_SD1_DATA5__SD1_DATA5 0x01E8 0x04B0 0x0000 0x0 0x0
+#define MX6SLL_PAD_SD1_DATA5__KEY_ROW3 0x01E8 0x04B0 0x06CC 0x2 0x2
+#define MX6SLL_PAD_SD1_DATA5__EPDC_SDOED 0x01E8 0x04B0 0x0000 0x3 0x0
+#define MX6SLL_PAD_SD1_DATA5__UART4_DCE_TX 0x01E8 0x04B0 0x0000 0x4 0x0
+#define MX6SLL_PAD_SD1_DATA5__UART4_DTE_RX 0x01E8 0x04B0 0x075C 0x4 0x7
+#define MX6SLL_PAD_SD1_DATA5__GPIO5_IO09 0x01E8 0x04B0 0x0000 0x5 0x0
+#define MX6SLL_PAD_SD1_DATA6__SD1_DATA6 0x01EC 0x04B4 0x0000 0x0 0x0
+#define MX6SLL_PAD_SD1_DATA6__KEY_COL4 0x01EC 0x04B4 0x06B0 0x2 0x2
+#define MX6SLL_PAD_SD1_DATA6__EPDC_SDOEZ 0x01EC 0x04B4 0x0000 0x3 0x0
+#define MX6SLL_PAD_SD1_DATA6__UART4_DCE_RTS 0x01EC 0x04B4 0x0758 0x4 0x4
+#define MX6SLL_PAD_SD1_DATA6__UART4_DTE_CTS 0x01EC 0x04B4 0x0000 0x4 0x0
+#define MX6SLL_PAD_SD1_DATA6__GPIO5_IO07 0x01EC 0x04B4 0x0000 0x5 0x0
+#define MX6SLL_PAD_SD1_DATA7__SD1_DATA7 0x01F0 0x04B8 0x0000 0x0 0x0
+#define MX6SLL_PAD_SD1_DATA7__KEY_ROW4 0x01F0 0x04B8 0x06D0 0x2 0x2
+#define MX6SLL_PAD_SD1_DATA7__CCM_PMIC_READY 0x01F0 0x04B8 0x05AC 0x3 0x3
+#define MX6SLL_PAD_SD1_DATA7__UART4_DCE_CTS 0x01F0 0x04B8 0x0000 0x4 0x0
+#define MX6SLL_PAD_SD1_DATA7__UART4_DTE_RTS 0x01F0 0x04B8 0x0758 0x4 0x5
+#define MX6SLL_PAD_SD1_DATA7__GPIO5_IO10 0x01F0 0x04B8 0x0000 0x5 0x0
+#define MX6SLL_PAD_SD2_RESET__SD2_RESET 0x01F4 0x04BC 0x0000 0x0 0x0
+#define MX6SLL_PAD_SD2_RESET__WDOG2_B 0x01F4 0x04BC 0x0000 0x2 0x0
+#define MX6SLL_PAD_SD2_RESET__SPDIF_OUT 0x01F4 0x04BC 0x0000 0x3 0x0
+#define MX6SLL_PAD_SD2_RESET__CSI_MCLK 0x01F4 0x04BC 0x0000 0x4 0x0
+#define MX6SLL_PAD_SD2_RESET__GPIO4_IO27 0x01F4 0x04BC 0x0000 0x5 0x0
+#define MX6SLL_PAD_SD2_CLK__SD2_CLK 0x01F8 0x04C0 0x0000 0x0 0x0
+#define MX6SLL_PAD_SD2_CLK__AUD4_RXFS 0x01F8 0x04C0 0x0570 0x1 0x1
+#define MX6SLL_PAD_SD2_CLK__ECSPI3_SCLK 0x01F8 0x04C0 0x0630 0x2 0x1
+#define MX6SLL_PAD_SD2_CLK__CSI_DATA00 0x01F8 0x04C0 0x05C8 0x3 0x1
+#define MX6SLL_PAD_SD2_CLK__GPIO5_IO05 0x01F8 0x04C0 0x0000 0x5 0x0
+#define MX6SLL_PAD_SD2_CMD__SD2_CMD 0x01FC 0x04C4 0x0000 0x0 0x0
+#define MX6SLL_PAD_SD2_CMD__AUD4_RXC 0x01FC 0x04C4 0x056C 0x1 0x1
+#define MX6SLL_PAD_SD2_CMD__ECSPI3_SS0 0x01FC 0x04C4 0x0648 0x2 0x1
+#define MX6SLL_PAD_SD2_CMD__CSI_DATA01 0x01FC 0x04C4 0x05CC 0x3 0x1
+#define MX6SLL_PAD_SD2_CMD__EPIT1_OUT 0x01FC 0x04C4 0x0000 0x4 0x0
+#define MX6SLL_PAD_SD2_CMD__GPIO5_IO04 0x01FC 0x04C4 0x0000 0x5 0x0
+#define MX6SLL_PAD_SD2_DATA0__SD2_DATA0 0x0200 0x04C8 0x0000 0x0 0x0
+#define MX6SLL_PAD_SD2_DATA0__AUD4_RXD 0x0200 0x04C8 0x0564 0x1 0x2
+#define MX6SLL_PAD_SD2_DATA0__ECSPI3_MOSI 0x0200 0x04C8 0x063C 0x2 0x1
+#define MX6SLL_PAD_SD2_DATA0__CSI_DATA02 0x0200 0x04C8 0x05D0 0x3 0x1
+#define MX6SLL_PAD_SD2_DATA0__UART5_DCE_RTS 0x0200 0x04C8 0x0760 0x4 0x4
+#define MX6SLL_PAD_SD2_DATA0__UART5_DTE_CTS 0x0200 0x04C8 0x0000 0x4 0x0
+#define MX6SLL_PAD_SD2_DATA0__GPIO5_IO01 0x0200 0x04C8 0x0000 0x5 0x0
+#define MX6SLL_PAD_SD2_DATA1__SD2_DATA1 0x0204 0x04CC 0x0000 0x0 0x0
+#define MX6SLL_PAD_SD2_DATA1__AUD4_TXC 0x0204 0x04CC 0x0574 0x1 0x2
+#define MX6SLL_PAD_SD2_DATA1__ECSPI3_MISO 0x0204 0x04CC 0x0638 0x2 0x1
+#define MX6SLL_PAD_SD2_DATA1__CSI_DATA03 0x0204 0x04CC 0x05D4 0x3 0x1
+#define MX6SLL_PAD_SD2_DATA1__UART5_DCE_CTS 0x0204 0x04CC 0x0000 0x4 0x0
+#define MX6SLL_PAD_SD2_DATA1__UART5_DTE_RTS 0x0204 0x04CC 0x0760 0x4 0x5
+#define MX6SLL_PAD_SD2_DATA1__GPIO4_IO30 0x0204 0x04CC 0x0000 0x5 0x0
+#define MX6SLL_PAD_SD2_DATA2__SD2_DATA2 0x0208 0x04D0 0x0000 0x0 0x0
+#define MX6SLL_PAD_SD2_DATA2__AUD4_TXFS 0x0208 0x04D0 0x0578 0x1 0x2
+#define MX6SLL_PAD_SD2_DATA2__CSI_DATA04 0x0208 0x04D0 0x05D8 0x3 0x1
+#define MX6SLL_PAD_SD2_DATA2__UART5_DCE_RX 0x0208 0x04D0 0x0764 0x4 0x4
+#define MX6SLL_PAD_SD2_DATA2__UART5_DTE_TX 0x0208 0x04D0 0x0000 0x4 0x0
+#define MX6SLL_PAD_SD2_DATA2__GPIO5_IO03 0x0208 0x04D0 0x0000 0x5 0x0
+#define MX6SLL_PAD_SD2_DATA3__SD2_DATA3 0x020C 0x04D4 0x0000 0x0 0x0
+#define MX6SLL_PAD_SD2_DATA3__AUD4_TXD 0x020C 0x04D4 0x0568 0x1 0x2
+#define MX6SLL_PAD_SD2_DATA3__CSI_DATA05 0x020C 0x04D4 0x05DC 0x3 0x1
+#define MX6SLL_PAD_SD2_DATA3__UART5_DCE_TX 0x020C 0x04D4 0x0000 0x4 0x0
+#define MX6SLL_PAD_SD2_DATA3__UART5_DTE_RX 0x020C 0x04D4 0x0764 0x4 0x5
+#define MX6SLL_PAD_SD2_DATA3__GPIO4_IO28 0x020C 0x04D4 0x0000 0x5 0x0
+#define MX6SLL_PAD_SD2_DATA4__SD2_DATA4 0x0210 0x04D8 0x0000 0x0 0x0
+#define MX6SLL_PAD_SD2_DATA4__SD3_DATA4 0x0210 0x04D8 0x0784 0x1 0x1
+#define MX6SLL_PAD_SD2_DATA4__UART2_DCE_RX 0x0210 0x04D8 0x074C 0x2 0x2
+#define MX6SLL_PAD_SD2_DATA4__UART2_DTE_TX 0x0210 0x04D8 0x0000 0x2 0x0
+#define MX6SLL_PAD_SD2_DATA4__CSI_DATA06 0x0210 0x04D8 0x05E0 0x3 0x1
+#define MX6SLL_PAD_SD2_DATA4__SPDIF_OUT 0x0210 0x04D8 0x0000 0x4 0x0
+#define MX6SLL_PAD_SD2_DATA4__GPIO5_IO02 0x0210 0x04D8 0x0000 0x5 0x0
+#define MX6SLL_PAD_SD2_DATA5__SD2_DATA5 0x0214 0x04DC 0x0000 0x0 0x0
+#define MX6SLL_PAD_SD2_DATA5__SD3_DATA5 0x0214 0x04DC 0x0788 0x1 0x1
+#define MX6SLL_PAD_SD2_DATA5__UART2_DCE_TX 0x0214 0x04DC 0x0000 0x2 0x0
+#define MX6SLL_PAD_SD2_DATA5__UART2_DTE_RX 0x0214 0x04DC 0x074C 0x2 0x3
+#define MX6SLL_PAD_SD2_DATA5__CSI_DATA07 0x0214 0x04DC 0x05E4 0x3 0x1
+#define MX6SLL_PAD_SD2_DATA5__SPDIF_IN 0x0214 0x04DC 0x0738 0x4 0x1
+#define MX6SLL_PAD_SD2_DATA5__GPIO4_IO31 0x0214 0x04DC 0x0000 0x5 0x0
+#define MX6SLL_PAD_SD2_DATA6__SD2_DATA6 0x0218 0x04E0 0x0000 0x0 0x0
+#define MX6SLL_PAD_SD2_DATA6__SD3_DATA6 0x0218 0x04E0 0x078C 0x1 0x1
+#define MX6SLL_PAD_SD2_DATA6__UART2_DCE_RTS 0x0218 0x04E0 0x0748 0x2 0x2
+#define MX6SLL_PAD_SD2_DATA6__UART2_DTE_CTS 0x0218 0x04E0 0x0000 0x2 0x0
+#define MX6SLL_PAD_SD2_DATA6__CSI_DATA08 0x0218 0x04E0 0x05E8 0x3 0x1
+#define MX6SLL_PAD_SD2_DATA6__SD2_WP 0x0218 0x04E0 0x077C 0x4 0x1
+#define MX6SLL_PAD_SD2_DATA6__GPIO4_IO29 0x0218 0x04E0 0x0000 0x5 0x0
+#define MX6SLL_PAD_SD2_DATA7__SD2_DATA7 0x021C 0x04E4 0x0000 0x0 0x0
+#define MX6SLL_PAD_SD2_DATA7__SD3_DATA7 0x021C 0x04E4 0x0790 0x1 0x1
+#define MX6SLL_PAD_SD2_DATA7__UART2_DCE_CTS 0x021C 0x04E4 0x0000 0x2 0x0
+#define MX6SLL_PAD_SD2_DATA7__UART2_DTE_RTS 0x021C 0x04E4 0x0748 0x2 0x3
+#define MX6SLL_PAD_SD2_DATA7__CSI_DATA09 0x021C 0x04E4 0x05EC 0x3 0x1
+#define MX6SLL_PAD_SD2_DATA7__SD2_CD_B 0x021C 0x04E4 0x0778 0x4 0x1
+#define MX6SLL_PAD_SD2_DATA7__GPIO5_IO00 0x021C 0x04E4 0x0000 0x5 0x0
+#define MX6SLL_PAD_SD3_CLK__SD3_CLK 0x0220 0x04E8 0x0000 0x0 0x0
+#define MX6SLL_PAD_SD3_CLK__AUD5_RXFS 0x0220 0x04E8 0x0588 0x1 0x0
+#define MX6SLL_PAD_SD3_CLK__KEY_COL5 0x0220 0x04E8 0x0694 0x2 0x0
+#define MX6SLL_PAD_SD3_CLK__CSI_DATA10 0x0220 0x04E8 0x05B0 0x3 0x0
+#define MX6SLL_PAD_SD3_CLK__WDOG1_RESET_B_DEB 0x0220 0x04E8 0x0000 0x4 0x0
+#define MX6SLL_PAD_SD3_CLK__GPIO5_IO18 0x0220 0x04E8 0x0000 0x5 0x0
+#define MX6SLL_PAD_SD3_CLK__USB_OTG1_PWR 0x0220 0x04E8 0x0000 0x6 0x0
+#define MX6SLL_PAD_SD3_CMD__SD3_CMD 0x0224 0x04EC 0x0000 0x0 0x0
+#define MX6SLL_PAD_SD3_CMD__AUD5_RXC 0x0224 0x04EC 0x0584 0x1 0x0
+#define MX6SLL_PAD_SD3_CMD__KEY_ROW5 0x0224 0x04EC 0x06B4 0x2 0x0
+#define MX6SLL_PAD_SD3_CMD__CSI_DATA11 0x0224 0x04EC 0x05B4 0x3 0x0
+#define MX6SLL_PAD_SD3_CMD__USB_OTG2_ID 0x0224 0x04EC 0x0560 0x4 0x1
+#define MX6SLL_PAD_SD3_CMD__GPIO5_IO21 0x0224 0x04EC 0x0000 0x5 0x0
+#define MX6SLL_PAD_SD3_CMD__USB_OTG2_PWR 0x0224 0x04EC 0x0000 0x6 0x0
+#define MX6SLL_PAD_SD3_DATA0__SD3_DATA0 0x0228 0x04F0 0x0000 0x0 0x0
+#define MX6SLL_PAD_SD3_DATA0__AUD5_RXD 0x0228 0x04F0 0x057C 0x1 0x0
+#define MX6SLL_PAD_SD3_DATA0__KEY_COL6 0x0228 0x04F0 0x0698 0x2 0x0
+#define MX6SLL_PAD_SD3_DATA0__CSI_DATA12 0x0228 0x04F0 0x05B8 0x3 0x0
+#define MX6SLL_PAD_SD3_DATA0__USB_OTG1_ID 0x0228 0x04F0 0x055C 0x4 0x1
+#define MX6SLL_PAD_SD3_DATA0__GPIO5_IO19 0x0228 0x04F0 0x0000 0x5 0x0
+#define MX6SLL_PAD_SD3_DATA1__SD3_DATA1 0x022C 0x04F4 0x0000 0x0 0x0
+#define MX6SLL_PAD_SD3_DATA1__AUD5_TXC 0x022C 0x04F4 0x058C 0x1 0x0
+#define MX6SLL_PAD_SD3_DATA1__KEY_ROW6 0x022C 0x04F4 0x06B8 0x2 0x0
+#define MX6SLL_PAD_SD3_DATA1__CSI_DATA13 0x022C 0x04F4 0x05BC 0x3 0x0
+#define MX6SLL_PAD_SD3_DATA1__SD1_VSELECT 0x022C 0x04F4 0x0000 0x4 0x0
+#define MX6SLL_PAD_SD3_DATA1__GPIO5_IO20 0x022C 0x04F4 0x0000 0x5 0x0
+#define MX6SLL_PAD_SD3_DATA1__JTAG_DE_B 0x022C 0x04F4 0x0000 0x6 0x0
+#define MX6SLL_PAD_SD3_DATA2__SD3_DATA2 0x0230 0x04F8 0x0000 0x0 0x0
+#define MX6SLL_PAD_SD3_DATA2__AUD5_TXFS 0x0230 0x04F8 0x0590 0x1 0x0
+#define MX6SLL_PAD_SD3_DATA2__KEY_COL7 0x0230 0x04F8 0x069C 0x2 0x0
+#define MX6SLL_PAD_SD3_DATA2__CSI_DATA14 0x0230 0x04F8 0x05C0 0x3 0x0
+#define MX6SLL_PAD_SD3_DATA2__EPIT1_OUT 0x0230 0x04F8 0x0000 0x4 0x0
+#define MX6SLL_PAD_SD3_DATA2__GPIO5_IO16 0x0230 0x04F8 0x0000 0x5 0x0
+#define MX6SLL_PAD_SD3_DATA2__USB_OTG2_OC 0x0230 0x04F8 0x0768 0x6 0x0
+#define MX6SLL_PAD_SD3_DATA3__SD3_DATA3 0x0234 0x04FC 0x0000 0x0 0x0
+#define MX6SLL_PAD_SD3_DATA3__AUD5_TXD 0x0234 0x04FC 0x0580 0x1 0x0
+#define MX6SLL_PAD_SD3_DATA3__KEY_ROW7 0x0234 0x04FC 0x06BC 0x2 0x0
+#define MX6SLL_PAD_SD3_DATA3__CSI_DATA15 0x0234 0x04FC 0x05C4 0x3 0x0
+#define MX6SLL_PAD_SD3_DATA3__EPIT2_OUT 0x0234 0x04FC 0x0000 0x4 0x0
+#define MX6SLL_PAD_SD3_DATA3__GPIO5_IO17 0x0234 0x04FC 0x0000 0x5 0x0
+#define MX6SLL_PAD_SD3_DATA3__USB_OTG1_OC 0x0234 0x04FC 0x076C 0x6 0x0
+#define MX6SLL_PAD_GPIO4_IO20__SD1_STROBE 0x0238 0x0500 0x0000 0x0 0x0
+#define MX6SLL_PAD_GPIO4_IO20__AUD6_RXFS 0x0238 0x0500 0x05A0 0x2 0x0
+#define MX6SLL_PAD_GPIO4_IO20__ECSPI4_SS0 0x0238 0x0500 0x065C 0x3 0x0
+#define MX6SLL_PAD_GPIO4_IO20__GPT_CAPTURE1 0x0238 0x0500 0x0670 0x4 0x0
+#define MX6SLL_PAD_GPIO4_IO20__GPIO4_IO20 0x0238 0x0500 0x0000 0x5 0x0
+#define MX6SLL_PAD_GPIO4_IO21__SD2_STROBE 0x023C 0x0504 0x0000 0x0 0x0
+#define MX6SLL_PAD_GPIO4_IO21__AUD6_RXC 0x023C 0x0504 0x059C 0x2 0x0
+#define MX6SLL_PAD_GPIO4_IO21__ECSPI4_SCLK 0x023C 0x0504 0x0650 0x3 0x0
+#define MX6SLL_PAD_GPIO4_IO21__GPT_CAPTURE2 0x023C 0x0504 0x0674 0x4 0x0
+#define MX6SLL_PAD_GPIO4_IO21__GPIO4_IO21 0x023C 0x0504 0x0000 0x5 0x0
+#define MX6SLL_PAD_GPIO4_IO19__SD3_STROBE 0x0240 0x0508 0x0000 0x0 0x0
+#define MX6SLL_PAD_GPIO4_IO19__AUD6_RXD 0x0240 0x0508 0x0594 0x2 0x0
+#define MX6SLL_PAD_GPIO4_IO19__ECSPI4_MOSI 0x0240 0x0508 0x0658 0x3 0x0
+#define MX6SLL_PAD_GPIO4_IO19__GPT_COMPARE1 0x0240 0x0508 0x0000 0x4 0x0
+#define MX6SLL_PAD_GPIO4_IO19__GPIO4_IO19 0x0240 0x0508 0x0000 0x5 0x0
+#define MX6SLL_PAD_GPIO4_IO25__AUD6_TXC 0x0244 0x050C 0x05A4 0x2 0x0
+#define MX6SLL_PAD_GPIO4_IO25__ECSPI4_MISO 0x0244 0x050C 0x0654 0x3 0x0
+#define MX6SLL_PAD_GPIO4_IO25__GPT_COMPARE2 0x0244 0x050C 0x0000 0x4 0x0
+#define MX6SLL_PAD_GPIO4_IO25__GPIO4_IO25 0x0244 0x050C 0x0000 0x5 0x0
+#define MX6SLL_PAD_GPIO4_IO18__AUD6_TXFS 0x0248 0x0510 0x05A8 0x2 0x0
+#define MX6SLL_PAD_GPIO4_IO18__ECSPI4_SS1 0x0248 0x0510 0x0660 0x3 0x0
+#define MX6SLL_PAD_GPIO4_IO18__GPT_COMPARE3 0x0248 0x0510 0x0000 0x4 0x0
+#define MX6SLL_PAD_GPIO4_IO18__GPIO4_IO18 0x0248 0x0510 0x0000 0x5 0x0
+#define MX6SLL_PAD_GPIO4_IO24__AUD6_TXD 0x024C 0x0514 0x0598 0x2 0x0
+#define MX6SLL_PAD_GPIO4_IO24__ECSPI4_SS2 0x024C 0x0514 0x0664 0x3 0x0
+#define MX6SLL_PAD_GPIO4_IO24__GPT_CLKIN 0x024C 0x0514 0x0678 0x4 0x0
+#define MX6SLL_PAD_GPIO4_IO24__GPIO4_IO24 0x024C 0x0514 0x0000 0x5 0x0
+#define MX6SLL_PAD_GPIO4_IO23__AUDIO_CLK_OUT 0x0250 0x0518 0x0000 0x2 0x0
+#define MX6SLL_PAD_GPIO4_IO23__SD1_RESET 0x0250 0x0518 0x0000 0x3 0x0
+#define MX6SLL_PAD_GPIO4_IO23__SD3_RESET 0x0250 0x0518 0x0000 0x4 0x0
+#define MX6SLL_PAD_GPIO4_IO23__GPIO4_IO23 0x0250 0x0518 0x0000 0x5 0x0
+#define MX6SLL_PAD_GPIO4_IO17__USB_OTG1_ID 0x0254 0x051C 0x055C 0x2 0x2
+#define MX6SLL_PAD_GPIO4_IO17__SD1_VSELECT 0x0254 0x051C 0x0000 0x3 0x0
+#define MX6SLL_PAD_GPIO4_IO17__SD3_VSELECT 0x0254 0x051C 0x0000 0x4 0x0
+#define MX6SLL_PAD_GPIO4_IO17__GPIO4_IO17 0x0254 0x051C 0x0000 0x5 0x0
+#define MX6SLL_PAD_GPIO4_IO22__SPDIF_IN 0x0258 0x0520 0x0738 0x2 0x0
+#define MX6SLL_PAD_GPIO4_IO22__SD1_WP 0x0258 0x0520 0x0774 0x3 0x0
+#define MX6SLL_PAD_GPIO4_IO22__SD3_WP 0x0258 0x0520 0x0794 0x4 0x1
+#define MX6SLL_PAD_GPIO4_IO22__GPIO4_IO22 0x0258 0x0520 0x0000 0x5 0x0
+#define MX6SLL_PAD_GPIO4_IO16__SPDIF_OUT 0x025C 0x0524 0x0000 0x2 0x0
+#define MX6SLL_PAD_GPIO4_IO16__SD1_CD_B 0x025C 0x0524 0x0770 0x3 0x0
+#define MX6SLL_PAD_GPIO4_IO16__SD3_CD_B 0x025C 0x0524 0x0780 0x4 0x1
+#define MX6SLL_PAD_GPIO4_IO16__GPIO4_IO16 0x025C 0x0524 0x0000 0x5 0x0
+#define MX6SLL_PAD_GPIO4_IO26__WDOG1_B 0x0260 0x0528 0x0000 0x2 0x0
+#define MX6SLL_PAD_GPIO4_IO26__PWM4_OUT 0x0260 0x0528 0x0000 0x3 0x0
+#define MX6SLL_PAD_GPIO4_IO26__CCM_PMIC_READY 0x0260 0x0528 0x05AC 0x4 0x1
+#define MX6SLL_PAD_GPIO4_IO26__GPIO4_IO26 0x0260 0x0528 0x0000 0x5 0x0
+#define MX6SLL_PAD_GPIO4_IO26__SPDIF_EXT_CLK 0x0260 0x0528 0x073C 0x6 0x0
+
+#endif /* __DTS_IMX6SLL_PINFUNC_H */
diff --git a/arch/arm/dts/imx6sll.dtsi b/arch/arm/dts/imx6sll.dtsi
new file mode 100644
index 0000000..349c47a
--- /dev/null
+++ b/arch/arm/dts/imx6sll.dtsi
@@ -0,0 +1,859 @@
+/*
+ * Copyright 2016 Freescale Semiconductor, Inc.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+
+#include <dt-bindings/clock/imx6sll-clock.h>
+#include <dt-bindings/gpio/gpio.h>
+#include <dt-bindings/interrupt-controller/arm-gic.h>
+#include "imx6sll-pinfunc.h"
+#include "skeleton.dtsi"
+
+/ {
+ aliases {
+ gpio0 = &gpio1;
+ gpio1 = &gpio2;
+ gpio2 = &gpio3;
+ gpio3 = &gpio4;
+ gpio4 = &gpio5;
+ gpio5 = &gpio6;
+ i2c0 = &i2c1;
+ i2c1 = &i2c2;
+ i2c2 = &i2c3;
+ mmc0 = &usdhc1;
+ mmc1 = &usdhc2;
+ mmc2 = &usdhc3;
+ serial0 = &uart1;
+ serial1 = &uart2;
+ serial2 = &uart3;
+ serial3 = &uart4;
+ serial4 = &uart5;
+ spi0 = &ecspi1;
+ spi1 = &ecspi2;
+ spi3 = &ecspi3;
+ spi4 = &ecspi4;
+ usbphy0 = &usbphy1;
+ usbphy1 = &usbphy2;
+ };
+
+ cpus {
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ cpu0: cpu@0 {
+ compatible = "arm,cortex-a9";
+ device_type = "cpu";
+ reg = <0>;
+ next-level-cache = <&L2>;
+ operating-points = <
+ /* kHz uV */
+ 996000 1225000
+ 792000 1175000
+ 396000 1075000
+ 198000 975000
+ >;
+ fsl,soc-operating-points = <
+ /* ARM kHz SOC-PU uV */
+ 996000 1225000
+ 792000 1175000
+ 396000 1175000
+ 198000 1175000
+ >;
+ clock-latency = <61036>; /* two CLK32 periods */
+ fsl,low-power-run;
+ clocks = <&clks IMX6SLL_CLK_ARM>,
+ <&clks IMX6SLL_CLK_PLL2_PFD2>,
+ <&clks IMX6SLL_CLK_STEP>,
+ <&clks IMX6SLL_CLK_PLL1_SW>,
+ <&clks IMX6SLL_CLK_PLL1_SYS>,
+ <&clks IMX6SLL_CLK_PLL1>,
+ <&clks IMX6SLL_PLL1_BYPASS>,
+ <&clks IMX6SLL_PLL1_BYPASS_SRC>;
+ clock-names = "arm", "pll2_pfd2_396m", "step",
+ "pll1_sw", "pll1_sys", "pll1", "pll1_bypass",
+ "pll1_bypass_src";
+ };
+ };
+
+ intc: interrupt-controller@00a01000 {
+ compatible = "arm,cortex-a9-gic";
+ #interrupt-cells = <3>;
+ interrupt-controller;
+ reg = <0x00a01000 0x1000>,
+ <0x00a00100 0x100>;
+ interrupt-parent = <&intc>;
+ };
+
+ clocks {
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ ckil: clock@0 {
+ compatible = "fixed-clock";
+ reg = <0>;
+ #clock-cells = <0>;
+ clock-frequency = <32768>;
+ clock-output-names = "ckil";
+ };
+
+ osc: clock@1 {
+ compatible = "fixed-clock";
+ reg = <1>;
+ #clock-cells = <0>;
+ clock-frequency = <24000000>;
+ clock-output-names = "osc";
+ };
+
+ ipp_di0: clock@2 {
+ compatible = "fixed-clock";
+ reg = <2>;
+ #clock-cells = <0>;
+ clock-frequency = <0>;
+ clock-output-names = "ipp_di0";
+ };
+
+ ipp_di1: clock@3 {
+ compatible = "fixed-clock";
+ reg = <3>;
+ #clock-cells = <0>;
+ clock-frequency = <0>;
+ clock-output-names = "ipp_di1";
+ };
+ };
+
+ soc {
+ #address-cells = <1>;
+ #size-cells = <1>;
+ compatible = "simple-bus";
+ interrupt-parent = <&gpc>;
+ ranges;
+
+ busfreq {
+ compatible = "fsl,imx_busfreq";
+ clocks = <&clks IMX6SLL_CLK_PLL2_PFD2>, <&clks IMX6SLL_CLK_PLL2_198M>,
+ <&clks IMX6SLL_CLK_PLL2_BUS>, <&clks IMX6SLL_CLK_ARM>,
+ <&clks IMX6SLL_CLK_PLL3_USB_OTG>, <&clks IMX6SLL_CLK_PERIPH>,
+ <&clks IMX6SLL_CLK_PERIPH_PRE>, <&clks IMX6SLL_CLK_PERIPH_CLK2>,
+ <&clks IMX6SLL_CLK_PERIPH_CLK2_SEL>, <&clks IMX6SLL_CLK_OSC>,
+ <&clks IMX6SLL_CLK_AHB>, <&clks IMX6SLL_CLK_AXI_PODF>,
+ <&clks IMX6SLL_CLK_PERIPH2>, <&clks IMX6SLL_CLK_PERIPH2_PRE>,
+ <&clks IMX6SLL_CLK_PERIPH2_CLK2>, <&clks IMX6SLL_CLK_PERIPH2_CLK2_SEL>,
+ <&clks IMX6SLL_CLK_STEP>, <&clks IMX6SLL_CLK_MMDC_P0_FAST>, <&clks IMX6SLL_PLL1_BYPASS_SRC>,
+ <&clks IMX6SLL_PLL1_BYPASS>, <&clks IMX6SLL_CLK_PLL1_SYS>, <&clks IMX6SLL_CLK_PLL1_SW>,
+ <&clks IMX6SLL_CLK_PLL1>;
+ clock-names = "pll2_pfd2_396m", "pll2_198m", "pll2_bus", "arm", "pll3_usb_otg",
+ "periph", "periph_pre", "periph_clk2", "periph_clk2_sel", "osc",
+ "ahb", "ocram", "periph2", "periph2_pre", "periph2_clk2", "periph2_clk2_sel",
+ "step", "mmdc", "pll1_bypass_src", "pll1_bypass", "pll1_sys", "pll1_sw", "pll1";
+ fsl,max_ddr_freq = <400000000>;
+ };
+
+ ocrams: sram@00900000 {
+ compatible = "fsl,lpm-sram";
+ reg = <0x00900000 0x4000>;
+ };
+
+ ocrams_ddr: sram@00904000 {
+ compatible = "fsl,ddr-lpm-sram";
+ reg = <0x00904000 0x1000>;
+ };
+
+ ocram: sram@00905000 {
+ compatible = "mmio-sram";
+ reg = <0x00905000 0x1B000>;
+ };
+
+ L2: l2-cache@00a02000 {
+ compatible = "arm,pl310-cache";
+ reg = <0x00a02000 0x1000>;
+ interrupts = <GIC_SPI 92 IRQ_TYPE_LEVEL_HIGH>;
+ cache-unified;
+ cache-level = <2>;
+ arm,tag-latency = <4 2 3>;
+ arm,data-latency = <4 2 3>;
+ };
+
+ aips1: aips-bus@02000000 {
+ compatible = "fsl,aips-bus", "simple-bus";
+ #address-cells = <1>;
+ #size-cells = <1>;
+ reg = <0x02000000 0x100000>;
+ ranges;
+
+ spba: spba-bus@02000000 {
+ compatible = "fsl,spba-bus", "simple-bus";
+ #address-cells = <1>;
+ #size-cells = <1>;
+ reg = <0x02000000 0x40000>;
+ ranges;
+
+ spdif: spdif@02004000 {
+ compatible = "fsl,imx6sl-spdif", "fsl,imx35-spdif";
+ reg = <0x02004000 0x4000>;
+ interrupts = <GIC_SPI 52 IRQ_TYPE_LEVEL_HIGH>;
+ dmas = <&sdma 14 18 0>, <&sdma 15 18 0>;
+ dma-names = "rx", "tx";
+ clocks = <&clks IMX6SLL_CLK_SPDIF_GCLK>,
+ <&clks IMX6SLL_CLK_OSC>,
+ <&clks IMX6SLL_CLK_SPDIF>,
+ <&clks IMX6SLL_CLK_DUMMY>,
+ <&clks IMX6SLL_CLK_DUMMY>,
+ <&clks IMX6SLL_CLK_DUMMY>,
+ <&clks IMX6SLL_CLK_IPG>,
+ <&clks IMX6SLL_CLK_DUMMY>,
+ <&clks IMX6SLL_CLK_DUMMY>,
+ <&clks IMX6SLL_CLK_SPBA>;
+ clock-names = "core", "rxtx0",
+ "rxtx1", "rxtx2",
+ "rxtx3", "rxtx4",
+ "rxtx5", "rxtx6",
+ "rxtx7", "dma";
+ status = "disabled";
+ };
+
+ ecspi1: ecspi@02008000 {
+ compatible = "fsl,imx6ul-ecspi", "fsl,imx51-ecspi";
+ reg = <0x02008000 0x4000>;
+ interrupts = <GIC_SPI 31 IRQ_TYPE_LEVEL_HIGH>;
+ dmas = <&sdma 3 7 1>, <&sdma 4 7 2>;
+ dma-names = "rx", "tx";
+ clocks = <&clks IMX6SLL_CLK_ECSPI1>,
+ <&clks IMX6SLL_CLK_ECSPI1>;
+ clock-names = "ipg", "per";
+ status = "disabled";
+ };
+
+ ecspi2: ecspi@0200c000 {
+ compatible = "fsl,imx6ul-ecspi", "fsl,imx51-ecspi";
+ reg = <0x0200c000 0x4000>;
+ interrupts = <GIC_SPI 32 IRQ_TYPE_LEVEL_HIGH>;
+ dmas = <&sdma 5 7 1>, <&sdma 6 7 2>;
+ dma-names = "rx", "tx";
+ clocks = <&clks IMX6SLL_CLK_ECSPI2>,
+ <&clks IMX6SLL_CLK_ECSPI2>;
+ clock-names = "ipg", "per";
+ status = "disabled";
+ };
+
+ ecspi3: ecspi@02010000 {
+ compatible = "fsl,imx6ul-ecspi", "fsl,imx51-ecspi";
+ reg = <0x02010000 0x4000>;
+ interrupts = <GIC_SPI 33 IRQ_TYPE_LEVEL_HIGH>;
+ dmas = <&sdma 7 7 1>, <&sdma 8 7 2>;
+ dma-names = "rx", "tx";
+ clocks = <&clks IMX6SLL_CLK_ECSPI3>,
+ <&clks IMX6SLL_CLK_ECSPI3>;
+ clock-names = "ipg", "per";
+ status = "disabled";
+ };
+
+ ecspi4: ecspi@02014000 {
+ compatible = "fsl,imx6ul-ecspi", "fsl,imx51-ecspi";
+ reg = <0x02014000 0x4000>;
+ interrupts = <GIC_SPI 34 IRQ_TYPE_LEVEL_HIGH>;
+ dmas = <&sdma 9 7 1>, <&sdma 10 7 2>;
+ dma-names = "rx", "tx";
+ clocks = <&clks IMX6SLL_CLK_ECSPI4>,
+ <&clks IMX6SLL_CLK_ECSPI4>;
+ clock-names = "ipg", "per";
+ status = "disabled";
+ };
+
+ uart4: serial@02018000 {
+ compatible = "fsl,imx6sll-uart", "fsl,imx6q-uart", "fsl,imx21-uart";
+ reg = <0x02018000 0x4000>;
+ interrupts =<GIC_SPI 29 IRQ_TYPE_LEVEL_HIGH>;
+ dmas = <&sdma 31 4 0>, <&sdma 32 4 0>;
+ dma-names = "rx", "tx";
+ clocks = <&clks IMX6SLL_CLK_UART4_IPG>,
+ <&clks IMX6SLL_CLK_UART4_SERIAL>;
+ clock-names = "ipg", "per";
+ status = "disabled";
+ };
+
+ uart1: serial@02020000 {
+ compatible = "fsl,imx6sll-uart", "fsl,imx6q-uart", "fsl,imx21-uart";
+ reg = <0x02020000 0x4000>;
+ interrupts = <GIC_SPI 26 IRQ_TYPE_LEVEL_HIGH>;
+ dmas = <&sdma 25 4 0>, <&sdma 26 4 0>;
+ dma-names = "rx", "tx";
+ clocks = <&clks IMX6SLL_CLK_UART1_IPG>,
+ <&clks IMX6SLL_CLK_UART1_SERIAL>;
+ clock-names = "ipg", "per";
+ status = "disabled";
+ };
+
+ uart2: serial@02024000 {
+ compatible = "fsl,imx6sll-uart", "fsl,imx6q-uart", "fsl,imx21-uart";
+ reg = <0x02024000 0x4000>;
+ interrupts = <GIC_SPI 27 IRQ_TYPE_LEVEL_HIGH>;
+ dmas = <&sdma 27 4 0>, <&sdma 28 4 0>;
+ dma-names = "rx", "tx";
+ clocks = <&clks IMX6SLL_CLK_UART2_IPG>,
+ <&clks IMX6SLL_CLK_UART2_SERIAL>;
+ clock-names = "ipg", "per";
+ status = "disabled";
+ };
+
+ ssi1: ssi@02028000 {
+ compatible = "fsl,imx6sll-ssi", "fsl,imx51-ssi";
+ reg = <0x02028000 0x4000>;
+ interrupts = <GIC_SPI 46 IRQ_TYPE_LEVEL_HIGH>;
+ dmas = <&sdma 37 22 0>, <&sdma 38 22 0>;
+ dma-names = "rx", "tx";
+ fsl,fifo-depth = <15>;
+ clocks = <&clks IMX6SLL_CLK_SSI1_IPG>,
+ <&clks IMX6SLL_CLK_SSI1>;
+ clock-names = "ipg", "baud";
+ status = "disabled";
+ };
+
+ ssi2: ssi2@0202c000 {
+ compatible = "fsl,imx6sll-ssi", "fsl,imx51-ssi";
+ reg = <0x0202c000 0x4000>;
+ interrupts = <GIC_SPI 47 IRQ_TYPE_LEVEL_HIGH>;
+ dmas = <&sdma 41 22 0>, <&sdma 42 22 0>;
+ dma-names = "rx", "tx";
+ fsl,fifo-depth = <15>;
+ clocks = <&clks IMX6SLL_CLK_SSI2_IPG>,
+ <&clks IMX6SLL_CLK_SSI2>;
+ clock-names = "ipg", "baud";
+ status = "disabled";
+ };
+
+ ssi3: ssi@02030000 {
+ compatible = "fsl,imx6sll-ssi", "fsl,imx51-ssi";
+ reg = <0x02030000 0x4000>;
+ interrupts = <GIC_SPI 48 IRQ_TYPE_LEVEL_HIGH>;
+ dmas = <&sdma 45 22 0>, <&sdma 46 22 0>;
+ dma-names = "rx", "tx";
+ fsl,fifo-depth = <15>;
+ clocks = <&clks IMX6SLL_CLK_SSI3_IPG>,
+ <&clks IMX6SLL_CLK_SSI3>;
+ clock-names = "ipg", "baud";
+ status = "disabled";
+ };
+
+ uart3: serial@02034000 {
+ compatible = "fsl,imx6sll-uart", "fsl,imx6q-uart", "fsl,imx21-uart";
+ reg = <0x02034000 0x4000>;
+ interrupts = <GIC_SPI 28 IRQ_TYPE_LEVEL_HIGH>;
+ dmas = <&sdma 29 4 0>, <&sdma 30 4 0>;
+ dma-name = "rx", "tx";
+ clocks = <&clks IMX6SLL_CLK_UART3_IPG>,
+ <&clks IMX6SLL_CLK_UART3_SERIAL>;
+ clock-names = "ipg", "per";
+ status = "disabled";
+ };
+ };
+
+ pwm1: pwm@02080000 {
+ compatible = "fsl,imx6sll-pwm", "fsl,imx27-pwm";
+ reg = <0x02080000 0x4000>;
+ interrupts = <GIC_SPI 83 IRQ_TYPE_LEVEL_HIGH>;
+ clocks = <&clks IMX6SLL_CLK_PWM1>,
+ <&clks IMX6SLL_CLK_PWM1>;
+ clock-names = "ipg", "per";
+ #pwm-cells = <2>;
+ };
+
+ pwm2: pwm@02084000 {
+ compatible = "fsl,imx6sll-pwm", "fsl,imx27-pwm";
+ reg = <0x02084000 0x4000>;
+ interrupts = <GIC_SPI 84 IRQ_TYPE_LEVEL_HIGH>;
+ clocks = <&clks IMX6SLL_CLK_PWM2>,
+ <&clks IMX6SLL_CLK_PWM2>;
+ clock-names = "ipg", "per";
+ #pwm-cells = <2>;
+ };
+
+ pwm3: pwm@02088000 {
+ compatible = "fsl,imx6sll-pwm", "fsl,imx27-pwm";
+ reg = <0x02088000 0x4000>;
+ interrupts = <GIC_SPI 85 IRQ_TYPE_LEVEL_HIGH>;
+ clocks = <&clks IMX6SLL_CLK_PWM3>,
+ <&clks IMX6SLL_CLK_PWM3>;
+ clock-names = "ipg", "per";
+ #pwm-cells = <2>;
+ };
+
+ pwm4: pwm@0208c000 {
+ compatible = "fsl,imx6sll-pwm", "fsl,imx27-pwm";
+ reg = <0x0208c000 0x4000>;
+ interrupts = <GIC_SPI 86 IRQ_TYPE_LEVEL_HIGH>;
+ clocks = <&clks IMX6SLL_CLK_PWM4>,
+ <&clks IMX6SLL_CLK_PWM4>;
+ clock-names = "ipg", "per";
+ #pwm-cells = <2>;
+ };
+
+ gpt1: gpt@02098000 {
+ compatible = "fsl,imx6sll-gpt";
+ reg = <0x02098000 0x4000>;
+ interrupts = <GIC_SPI 55 IRQ_TYPE_LEVEL_HIGH>;
+ clocks = <&clks IMX6SLL_CLK_GPT_BUS>,
+ <&clks IMX6SLL_CLK_GPT_SERIAL>;
+ clock-names = "ipg", "per";
+ };
+
+ gpio1: gpio@0209c000 {
+ compatible = "fsl,imx6sll-gpio", "fsl,imx35-gpio";
+ reg = <0x0209c000 0x4000>;
+ interrupts = <GIC_SPI 66 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 67 IRQ_TYPE_LEVEL_HIGH>;
+ gpio-controller;
+ #gpio-cells = <2>;
+ interrupt-controller;
+ #interrupt-cells = <2>;
+ };
+
+ gpio2: gpio@020a0000 {
+ compatible = "fsl,imx6sll-gpio", "fsl,imx35-gpio";
+ reg = <0x020a0000 0x4000>;
+ interrupts = <GIC_SPI 68 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 69 IRQ_TYPE_LEVEL_HIGH>;
+ gpio-controller;
+ #gpio-cells = <2>;
+ interrupt-controller;
+ #interrupt-cells = <2>;
+ };
+
+ gpio3: gpio@020a4000 {
+ compatible = "fsl,imx6sll-gpio", "fsl,imx35-gpio";
+ reg = <0x020a4000 0x4000>;
+ interrupts = <GIC_SPI 70 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 71 IRQ_TYPE_LEVEL_HIGH>;
+ gpio-controller;
+ #gpio-cells = <2>;
+ interrupt-controller;
+ #interrupt-cells = <2>;
+ };
+
+ gpio4: gpio@020a8000 {
+ compatible = "fsl,imx6sll-gpio", "fsl,imx35-gpio";
+ reg = <0x020a8000 0x4000>;
+ interrupts = <GIC_SPI 72 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 73 IRQ_TYPE_LEVEL_HIGH>;
+ gpio-controller;
+ #gpio-cells = <2>;
+ interrupt-controller;
+ #interrupt-cells = <2>;
+ };
+
+ gpio5: gpio@020ac000 {
+ compatible = "fsl,imx6sll-gpio", "fsl,imx35-gpio";
+ reg = <0x020ac000 0x4000>;
+ interrupts = <GIC_SPI 74 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 75 IRQ_TYPE_LEVEL_HIGH>;
+ gpio-controller;
+ #gpio-cells = <2>;
+ interrupt-controller;
+ #interrupt-cells = <2>;
+ };
+
+ gpio6: gpio@020b0000 {
+ compatible = "fsl,imx6sll-gpio", "fsl,imx35-gpio";
+ reg = <0x020b0000 0x4000>;
+ interrupts = <GIC_SPI 76 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 77 IRQ_TYPE_LEVEL_HIGH>;
+ gpio-controller;
+ #gpio-cells = <2>;
+ interrupt-controller;
+ #interrupt-cells = <2>;
+ };
+
+ kpp: kpp@020b8000 {
+ compatible = "fsl,imx6sll-kpp", "fsl,imx21-kpp";
+ reg = <0x020b8000 0x4000>;
+ interrupts = <GIC_SPI 82 IRQ_TYPE_LEVEL_HIGH>;
+ clocks = <&clks IMX6SLL_CLK_KPP>;
+ status = "disabled";
+ };
+
+ wdog1: wdog@020bc000 {
+ compatible = "fsl,imx6sll-wdt", "fsl,imx21-wdt";
+ reg = <0x020bc000 0x4000>;
+ interrupts = <GIC_SPI 80 IRQ_TYPE_LEVEL_HIGH>;
+ clocks = <&clks IMX6SLL_CLK_WDOG1>;
+ };
+
+ wdog2: wdog@020c0000 {
+ compatible = "fsl,imx6sll-wdt", "fsl,imx21-wdt";
+ reg = <0x020c0000 0x4000>;
+ interrupts = <GIC_SPI 81 IRQ_TYPE_LEVEL_HIGH>;
+ clocks = <&clks IMX6SLL_CLK_WDOG2>;
+ status = "disabled";
+ };
+
+ clks: ccm@020c4000 {
+ compatible = "fsl,imx6sll-ccm";
+ reg = <0x020c4000 0x4000>;
+ interrupts = <GIC_SPI 87 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 88 IRQ_TYPE_LEVEL_HIGH>;
+ #clock-cells = <1>;
+ clocks = <&ckil>, <&osc>, <&ipp_di0>, <&ipp_di1>;
+ clock-names = "ckil", "osc", "ipp_di0", "ipp_di1";
+ };
+
+ anatop: anatop@020c8000 {
+ compatible = "fsl,imx6sll-anatop",
+ "fsl,imx6q-anatop",
+ "syscon", "simple-bus";
+ reg = <0x020c8000 0x4000>;
+ interrupts = <GIC_SPI 49 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 54 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 127 IRQ_TYPE_LEVEL_HIGH>;
+
+ reg_3p0: regulator-3p0@120 {
+ compatible = "fsl,anatop-regulator";
+ regulator-name = "vdd3p0";
+ regulator-min-microvolt = <2625000>;
+ regulator-max-microvolt = <3400000>;
+ anatop-reg-offset = <0x120>;
+ anatop-vol-bit-shift = <8>;
+ anatop-vol-bit-width = <5>;
+ anatop-min-bit-val = <0>;
+ anatop-min-voltage = <2625000>;
+ anatop-max-voltage = <3400000>;
+ anatop-enable-bit = <0>;
+ };
+ };
+
+ tempmon: tempmon {
+ compatible = "fsl,imx6sll-tempmon", "fsl,imx6sx-tempmon";
+ interrupts = <GIC_SPI 49 IRQ_TYPE_LEVEL_HIGH>;
+ fsl,tempmon = <&anatop>;
+ fsl,tempmon-data = <&ocotp>;
+ clocks = <&clks IMX6SLL_CLK_PLL3_USB_OTG>;
+ status = "disabled";
+ };
+
+ usbphy1: usbphy@020c9000 {
+ compatible = "fsl,imx6sll-usbphy", "fsl,imx6ul-usbphy",
+ "fsl,imx23-usbphy";
+ reg = <0x020c9000 0x1000>;
+ interrupts = <GIC_SPI 40 IRQ_TYPE_LEVEL_HIGH>;
+ clocks = <&clks IMX6SLL_CLK_USBPHY1>;
+ phy-3p0-supply = <®_3p0>;
+ fsl,anatop = <&anatop>;
+ };
+
+ usbphy2: usbphy@020ca000 {
+ compatible = "fsl,imx6sll-usbphy", "fsl,imx6ul-usbphy",
+ "fsl,imx23-usbphy";
+ reg = <0x020ca000 0x1000>;
+ interrupts = <GIC_SPI 41 IRQ_TYPE_LEVEL_HIGH>;
+ clocks = <&clks IMX6SLL_CLK_USBPHY2>;
+ phy-reg_3p0-supply = <®_3p0>;
+ fsl,anatop = <&anatop>;
+ };
+
+ snvs: snvs@020cc000 {
+ compatible = "fsl,sec-v4.0-mon", "syscon", "simple-mfd";
+ reg = <0x020cc000 0x4000>;
+
+ snvs_rtc: snvs-rtc-lp {
+ compatible = "fsl,sec-v4.0-mon-rtc-lp";
+ regmap = <&snvs>;
+ offset = <0x34>;
+ interrupts = <GIC_SPI 19 IRQ_TYPE_LEVEL_HIGH>, <GIC_SPI 20 IRQ_TYPE_LEVEL_HIGH>;
+ };
+
+ snvs_poweroff: snvs-poweroff {
+ compatible = "syscon-poweroff";
+ regmap = <&snvs>;
+ offset = <0x38>;
+ mask = <0x61>;
+ };
+
+ snvs_pwrkey: snvs-powerkey {
+ compatible = "fsl,sec-v4.0-pwrkey";
+ regmap = <&snvs>;
+ interrupts = <GIC_SPI 4 IRQ_TYPE_LEVEL_HIGH>;
+ linux,keycode = <KEY_POWER>;
+ wakeup;
+ };
+ };
+
+ epit1: epit@020d0000 {
+ reg = <0x020d0000 0x4000>;
+ interrupts = <GIC_SPI 56 IRQ_TYPE_LEVEL_HIGH>;
+ };
+
+ epit2: epit@020d4000 {
+ reg = <0x020d4000 0x4000>;
+ interrupts = <GIC_SPI 57 IRQ_TYPE_LEVEL_HIGH>;
+ };
+
+ src: src@020d8000 {
+ compatible = "fsl,imx6sll-src", "fsl,imx51-src";
+ reg = <0x020d8000 0x4000>;
+ interrupts = <GIC_SPI 91 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 96 IRQ_TYPE_LEVEL_HIGH>;
+ #reset-cells = <1>;
+ };
+
+ gpc: gpc@020dc000 {
+ compatible = "fsl,imx6sll-gpc", "fsl,imx6q-gpc";
+ reg = <0x020dc000 0x4000>;
+ interrupt-controller;
+ #interrupt-cells = <3>;
+ interrupts = <GIC_SPI 89 IRQ_TYPE_LEVEL_HIGH>;
+ interrupt-parent = <&intc>;
+ fsl,mf-mix-wakeup-irq = <0x7c00000 0x7d00 0x0 0x1400640>;
+ };
+
+ iomuxc: iomuxc@020e0000 {
+ compatible = "fsl,imx6sll-iomuxc";
+ reg = <0x020e0000 0x4000>;
+ };
+
+ gpr: iomuxc-gpr@020e4000 {
+ compatible = "fsl,imx6sll-iomuxc-gpr",
+ "fsl,imx6q-iomuxc-gpr", "syscon";
+ reg = <0x020e4000 0x4000>;
+ };
+
+ csi: csi@020e8000 {
+ compatible = "fsl,imx6sll-csi", "fsl,imx6s-csi";
+ reg = <0x020e8000 0x4000>;
+ interrupts = <GIC_SPI 7 IRQ_TYPE_LEVEL_HIGH>;
+ clocks = <&clks IMX6SLL_CLK_DUMMY>,
+ <&clks IMX6SLL_CLK_CSI>,
+ <&clks IMX6SLL_CLK_DUMMY>;
+ clock-names = "disp-axi", "csi_mclk", "disp_dcic";
+ status = "disabled";
+ };
+
+ sdma: sdma@020ec000 {
+ compatible = "fsl,imx6sll-sdma", "fsl,imx35-sdma";
+ reg = <0x020ec000 0x4000>;
+ interrupts = <GIC_SPI 2 IRQ_TYPE_LEVEL_HIGH>;
+ clocks = <&clks IMX6SLL_CLK_SDMA>,
+ <&clks IMX6SLL_CLK_SDMA>;
+ clock-names = "ipg", "ahb";
+ #dma-cells = <3>;
+ iram = <&ocram>;
+ fsl,sdma-ram-script-name = "imx/sdma/sdma-imx6q.bin";
+ };
+
+ pxp: pxp@020f0000 {
+ compatible = "fsl,imx6ull-pxp-dma", "fsl,imx7d-pxp-dma";
+ reg = <0x020f0000 0x4000>;
+ interrupts = <GIC_SPI 98 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 102 IRQ_TYPE_LEVEL_HIGH>;
+ clocks = <&clks IMX6SLL_CLK_DUMMY>,
+ <&clks IMX6SLL_CLK_PXP>;
+ clock-names = "pxp_ipg", "pxp_axi";
+ status = "disabled";
+ };
+
+ epdc: epdc@020f4000 {
+ compatible = "fsl,imx6sll-epdc", "fsl,imx7d-epdc";
+ reg = <0x020f4000 0x4000>;
+ interrupts = <GIC_SPI 97 IRQ_TYPE_LEVEL_HIGH>;
+ clocks = <&clks IMX6SLL_CLK_EPDC_AXI>, <&clks IMX6SLL_CLK_EPDC_PIX>;
+ clock-names = "epdc_axi", "epdc_pix";
+ status = "disabled";
+ };
+
+ lcdif: lcdif@020f8000 {
+ compatible = "fsl,imx6sll-lcdif", "fsl,imx28-lcdif";
+ reg = <0x020f8000 0x4000>;
+ interrupts = <GIC_SPI 39 IRQ_TYPE_LEVEL_HIGH>;
+ clocks = <&clks IMX6SLL_CLK_LCDIF_PIX>,
+ <&clks IMX6SLL_CLK_LCDIF_APB>,
+ <&clks IMX6SLL_CLK_DUMMY>;
+ clock-names = "pix", "axi", "disp_axi";
+ status = "disabled";
+ };
+
+ dcp: dcp@020fc000 {
+ compatible = "fsl,imx6sl-dcp";
+ reg = <0x020fc000 0x4000>;
+ interrupts = <GIC_SPI 99 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 100 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 101 IRQ_TYPE_LEVEL_HIGH>;
+ clocks = <&clks IMX6SLL_CLK_DCP>;
+ clock-names = "dcp";
+ };
+ };
+
+ aips2: aips-bus@02100000 {
+ compatible = "fsl,aips-bus", "simple-bus";
+ #address-cells = <1>;
+ #size-cells = <1>;
+ reg = <0x02100000 0x100000>;
+ ranges;
+
+ usbotg1: usb@02184000 {
+ compatible = "fsl,imx6sll-usb", "fsl,imx6ul-usb",
+ "fsl,imx27-usb";
+ reg = <0x02184000 0x200>;
+ interrupts = <GIC_SPI 43 IRQ_TYPE_LEVEL_HIGH>;
+ clocks = <&clks IMX6SLL_CLK_USBOH3>;
+ fsl,usbphy = <&usbphy1>;
+ fsl,usbmisc = <&usbmisc 0>;
+ fsl,anatop = <&anatop>;
+ ahb-burst-config = <0x0>;
+ tx-burst-size-dword = <0x10>;
+ rx-burst-size-dword = <0x10>;
+ status = "disabled";
+ };
+
+ usbotg2: usb@02184200 {
+ compatible = "fsl,imx6sll-usb", "fsl,imx6ul-usb",
+ "fsl,imx27-usb";
+ reg = <0x02184200 0x200>;
+ interrupts = <GIC_SPI 42 IRQ_TYPE_LEVEL_HIGH>;
+ clocks = <&clks IMX6SLL_CLK_USBOH3>;
+ fsl,usbphy = <&usbphy2>;
+ fsl,usbmisc = <&usbmisc 1>;
+ ahb-burst-config = <0x0>;
+ tx-burst-size-dword = <0x10>;
+ rx-burst-size-dword = <0x10>;
+ status = "disabled";
+ };
+
+ usbmisc: usbmisc@02184800 {
+ #index-cells = <1>;
+ compatible = "fsl,imx6sll-usbmisc", "fsl,imx6ul-usbmisc",
+ "fsl,imx6q-usbmisc";
+ reg = <0x02184800 0x200>;
+ };
+
+ usdhc1: usdhc@02190000 {
+ compatible = "fsl,imx6sll-usdhc", "fsl,imx6sx-usdhc";
+ reg = <0x02190000 0x4000>;
+ interrupts = <GIC_SPI 22 IRQ_TYPE_LEVEL_HIGH>;
+ clocks = <&clks IMX6SLL_CLK_USDHC1>,
+ <&clks IMX6SLL_CLK_USDHC1>,
+ <&clks IMX6SLL_CLK_USDHC1>;
+ clock-names = "ipg", "ahb", "per";
+ bus-width = <4>;
+ fsl,tuning-step = <2>;
+ fsl,tuning-start-tap = <20>;
+ status = "disabled";
+ };
+
+ usdhc2: usdhc@02194000 {
+ compatible = "fsl,imx6sll-usdhc", "fsl,imx6sx-usdhc";
+ reg = <0x02194000 0x4000>;
+ interrupts = <GIC_SPI 23 IRQ_TYPE_LEVEL_HIGH>;
+ clocks = <&clks IMX6SLL_CLK_USDHC2>,
+ <&clks IMX6SLL_CLK_USDHC2>,
+ <&clks IMX6SLL_CLK_USDHC2>;
+ clock-names = "ipg", "ahb", "per";
+ bus-width = <4>;
+ fsl,tuning-step = <2>;
+ fsl,tuning-start-tap = <20>;
+ status = "disabled";
+ };
+
+ usdhc3: usdhc@02198000 {
+ compatible = "fsl,imx6sll-usdhc", "fsl,imx6sx-usdhc";
+ reg = <0x02198000 0x4000>;
+ interrupts = <GIC_SPI 24 IRQ_TYPE_LEVEL_HIGH>;
+ clocks = <&clks IMX6SLL_CLK_USDHC3>,
+ <&clks IMX6SLL_CLK_USDHC3>,
+ <&clks IMX6SLL_CLK_USDHC3>;
+ clock-names = "ipg", "ahb", "per";
+ bus-width = <4>;
+ fsl,tuning-step = <2>;
+ fsl,tuning-start-tap = <20>;
+ status = "disabled";
+ };
+
+ i2c1: i2c@021a0000 {
+ #address-cells = <1>;
+ #size-cells = <0>;
+ compatible = "fs,imx6sll-i2c", "fsl,imx21-i2c";
+ reg = <0x021a0000 0x4000>;
+ interrupts = <GIC_SPI 36 IRQ_TYPE_LEVEL_HIGH>;
+ clocks = <&clks IMX6SLL_CLK_I2C1>;
+ status = "disabled";
+ };
+
+ i2c2: i2c@021a4000 {
+ #address-cells = <1>;
+ #size-cells = <0>;
+ compatible = "fsl,imx6sll-i2c", "fsl,imx21-i2c";
+ reg = <0x021a4000 0x4000>;
+ interrupts = <GIC_SPI 37 IRQ_TYPE_LEVEL_HIGH>;
+ clocks = <&clks IMX6SLL_CLK_I2C2>;
+ status = "disabled";
+ };
+
+ i2c3: i2c@021a8000 {
+ #address-cells = <1>;
+ #size-cells = <0>;
+ compatible = "fsl,imx6sll-i2c", "fsl,imx21-i2c";
+ reg = <0x021a8000 0x4000>;
+ interrupts = <GIC_SPI 38 IRQ_TYPE_LEVEL_HIGH>;
+ clocks = <&clks IMX6SLL_CLK_I2C3>;
+ status = "disabled";
+ };
+
+ romcp@021ac000 {
+ compatible = "fsl,imx6sll-romcp", "syscon";
+ reg = <0x021ac000 0x4000>;
+ };
+
+ mmdc: mmdc@021b0000 {
+ compatible = "fsl,imx6sll-mmdc", "fsl,imx6q-mmdc";
+ reg = <0x021b0000 0x4000>;
+ };
+
+ rngb: rngb@021b4000 {
+ compatible = "fsl,imx6sl-rng", "fsl,imx-rng", "imx-rng";
+ reg = <0x021b4000 0x4000>;
+ interrupts = <GIC_SPI 5 IRQ_TYPE_LEVEL_HIGH>;
+ clocks = <&clks IMX6SLL_CLK_DUMMY>;
+ };
+
+ ocotp: ocotp-ctrl@021bc000 {
+ compatible = "fsl,imx6sll-ocotp", "syscon";
+ reg = <0x021bc000 0x4000>;
+ clocks = <&clks IMX6SLL_CLK_OCOTP>;
+ };
+
+ csu: csu@021c0000 {
+ compatible = "fsl,imx6sll-csu";
+ reg = <0x021c0000 0x4000>;
+ interrupts = <GIC_SPI 21 IRQ_TYPE_LEVEL_HIGH>;
+ status = "disabled";
+ };
+
+ snvs_gpr: snvs-gpr@0x021c4000 {
+ compatible = "fsl, imx6sll-snvs-gpr";
+ reg = <0x021c4000 0x10000>;
+ };
+
+ iomuxc_snvs: iomuxc-snvs@021c8000 {
+ compatible = "fsl,imx6sll-iomuxc-snvs";
+ reg = <0x021c80000 0x10000>;
+ };
+
+ audmux: audmux@021d8000 {
+ compatible = "fsl,imx6sll-audmux", "fsl,imx31-audmux";
+ reg = <0x021d8000 0x4000>;
+ status = "disabled";
+ };
+
+ uart5: serial@021f4000 {
+ compatible = "fsl,imx6sll-uart", "fsl,imx6q-uart", "fsl,imx21-uart";
+ reg = <0x021f4000 0x4000>;
+ interrupts =<GIC_SPI 30 IRQ_TYPE_LEVEL_HIGH>;
+ dmas = <&sdma 33 4 0>, <&sdma 34 4 0>;
+ dma-names = "rx", "tx";
+ clocks = <&clks IMX6SLL_CLK_UART5_IPG>,
+ <&clks IMX6SLL_CLK_UART5_SERIAL>;
+ clock-names = "ipg", "per";
+ status = "disabled";
+ };
+ };
+ };
+};
diff --git a/arch/arm/dts/imx6ul-geam-kit.dts b/arch/arm/dts/imx6ul-geam-kit.dts
new file mode 100644
index 0000000..07c21cb
--- /dev/null
+++ b/arch/arm/dts/imx6ul-geam-kit.dts
@@ -0,0 +1,168 @@
+/*
+ * Copyright (C) 2016 Amarula Solutions B.V.
+ * Copyright (C) 2016 Engicam S.r.l.
+ *
+ * This file is dual-licensed: you can use it either under the terms
+ * of the GPL or the X11 license, at your option. Note that this dual
+ * licensing only applies to this file, and not this project as a
+ * whole.
+ *
+ * a) This file is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License
+ * version 2 as published by the Free Software Foundation.
+ *
+ * This file is distributed in the hope that it will be useful
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * Or, alternatively
+ *
+ * b) Permission is hereby granted, free of charge, to any person
+ * obtaining a copy of this software and associated documentation
+ * files (the "Software"), to deal in the Software without
+ * restriction, including without limitation the rights to use
+ * copy, modify, merge, publish, distribute, sublicense, and/or
+ * sell copies of the Software, and to permit persons to whom the
+ * Software is furnished to do so, subject to the following
+ * conditions:
+ *
+ * The above copyright notice and this permission notice shall be
+ * included in all copies or substantial portions of the Software.
+ *
+ * THE SOFTWARE IS PROVIDED , WITHOUT WARRANTY OF ANY KIND
+ * EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES
+ * OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
+ * NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT
+ * HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY
+ * WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING
+ * FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR
+ * OTHER DEALINGS IN THE SOFTWARE.
+ */
+
+/dts-v1/;
+
+#include <dt-bindings/gpio/gpio.h>
+#include <dt-bindings/input/input.h>
+#include "imx6ul.dtsi"
+
+/ {
+ model = "Engicam GEAM6UL";
+ compatible = "engicam,imx6ul-geam", "fsl,imx6ul";
+
+ memory {
+ reg = <0x80000000 0x08000000>;
+ };
+
+ chosen {
+ stdout-path = &uart1;
+ };
+};
+
+&fec1 {
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_enet1>;
+ phy-mode = "rmii";
+ status = "okay";
+};
+
+&i2c1 {
+ clock-frequency = <100000>;
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_i2c1>;
+ status = "okay";
+};
+
+&i2c2 {
+ clock_frequency = <100000>;
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_i2c2>;
+ status = "okay";
+};
+
+&uart1 {
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_uart1>;
+ status = "okay";
+};
+
+&usdhc1 {
+ pinctrl-names = "default", "state_100mhz", "state_200mhz";
+ pinctrl-0 = <&pinctrl_usdhc1>;
+ pinctrl-1 = <&pinctrl_usdhc1_100mhz>;
+ pinctrl-2 = <&pinctrl_usdhc1_200mhz>;
+ bus-width = <4>;
+ cd-gpios = <&gpio1 19 GPIO_ACTIVE_LOW>;
+ no-1-8-v;
+ status = "okay";
+};
+
+&iomuxc {
+ pinctrl_enet1: enet1grp {
+ fsl,pins = <
+ MX6UL_PAD_GPIO1_IO07__ENET2_MDC 0x1b0b0
+ MX6UL_PAD_GPIO1_IO06__ENET2_MDIO 0x1b0b0
+ MX6UL_PAD_ENET1_RX_EN__ENET1_RX_EN 0x1b0b0
+ MX6UL_PAD_ENET1_RX_DATA0__ENET1_RDATA00 0x1b0b0
+ MX6UL_PAD_ENET1_RX_DATA1__ENET1_RDATA01 0x1b0b0
+ MX6UL_PAD_ENET1_TX_EN__ENET1_TX_EN 0x1b0b0
+ MX6UL_PAD_ENET1_TX_DATA0__ENET1_TDATA00 0x1b0b0
+ MX6UL_PAD_ENET1_TX_DATA1__ENET1_TDATA01 0x1b0b0
+ MX6UL_PAD_ENET1_TX_CLK__ENET1_REF_CLK1 0x4001b031
+ >;
+ };
+
+ pinctrl_i2c1: i2c1grp {
+ fsl,pins = <
+ MX6UL_PAD_UART4_TX_DATA__I2C1_SCL 0x4001b8b0
+ MX6UL_PAD_UART4_RX_DATA__I2C1_SDA 0x4001b8b0
+ >;
+ };
+
+ pinctrl_i2c2: i2c2grp {
+ fsl,pins = <
+ MX6UL_PAD_UART5_TX_DATA__I2C2_SCL 0x4001b8b0
+ MX6UL_PAD_UART5_RX_DATA__I2C2_SDA 0x4001b8b0
+ >;
+ };
+
+ pinctrl_uart1: uart1grp {
+ fsl,pins = <
+ MX6UL_PAD_UART1_TX_DATA__UART1_DCE_TX 0x1b0b1
+ MX6UL_PAD_UART1_RX_DATA__UART1_DCE_RX 0x1b0b1
+ >;
+ };
+
+ pinctrl_usdhc1: usdhc1grp {
+ fsl,pins = <
+ MX6UL_PAD_SD1_CMD__USDHC1_CMD 0x17059
+ MX6UL_PAD_SD1_CLK__USDHC1_CLK 0x10059
+ MX6UL_PAD_SD1_DATA0__USDHC1_DATA0 0x17059
+ MX6UL_PAD_SD1_DATA1__USDHC1_DATA1 0x17059
+ MX6UL_PAD_SD1_DATA2__USDHC1_DATA2 0x17059
+ MX6UL_PAD_SD1_DATA3__USDHC1_DATA3 0x17059
+ >;
+ };
+
+ pinctrl_usdhc1_100mhz: usdhc1grp100mhz {
+ fsl,pins = <
+ MX6UL_PAD_SD1_CMD__USDHC1_CMD 0x170b9
+ MX6UL_PAD_SD1_CLK__USDHC1_CLK 0x100b9
+ MX6UL_PAD_SD1_DATA0__USDHC1_DATA0 0x170b9
+ MX6UL_PAD_SD1_DATA1__USDHC1_DATA1 0x170b9
+ MX6UL_PAD_SD1_DATA2__USDHC1_DATA2 0x170b9
+ MX6UL_PAD_SD1_DATA3__USDHC1_DATA3 0x170b9
+ >;
+ };
+
+ pinctrl_usdhc1_200mhz: usdhc1grp200mhz {
+ fsl,pins = <
+ MX6UL_PAD_SD1_CMD__USDHC1_CMD 0x170f9
+ MX6UL_PAD_SD1_CLK__USDHC1_CLK 0x100f9
+ MX6UL_PAD_SD1_DATA0__USDHC1_DATA0 0x170f9
+ MX6UL_PAD_SD1_DATA1__USDHC1_DATA1 0x170f9
+ MX6UL_PAD_SD1_DATA2__USDHC1_DATA2 0x170f9
+ MX6UL_PAD_SD1_DATA3__USDHC1_DATA3 0x170f9
+ >;
+ };
+};
diff --git a/arch/arm/dts/imx6ul.dtsi b/arch/arm/dts/imx6ul.dtsi
new file mode 100644
index 0000000..c5c05fd
--- /dev/null
+++ b/arch/arm/dts/imx6ul.dtsi
@@ -0,0 +1,942 @@
+/*
+ * Copyright 2015 Freescale Semiconductor, Inc.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+
+#include <dt-bindings/clock/imx6ul-clock.h>
+#include <dt-bindings/gpio/gpio.h>
+#include <dt-bindings/input/input.h>
+#include <dt-bindings/interrupt-controller/arm-gic.h>
+#include "imx6ul-pinfunc.h"
+#include "skeleton.dtsi"
+
+/ {
+ aliases {
+ ethernet0 = &fec1;
+ ethernet1 = &fec2;
+ gpio0 = &gpio1;
+ gpio1 = &gpio2;
+ gpio2 = &gpio3;
+ gpio3 = &gpio4;
+ gpio4 = &gpio5;
+ i2c0 = &i2c1;
+ i2c1 = &i2c2;
+ i2c2 = &i2c3;
+ i2c3 = &i2c4;
+ mmc0 = &usdhc1;
+ mmc1 = &usdhc2;
+ serial0 = &uart1;
+ serial1 = &uart2;
+ serial2 = &uart3;
+ serial3 = &uart4;
+ serial4 = &uart5;
+ serial5 = &uart6;
+ serial6 = &uart7;
+ serial7 = &uart8;
+ sai1 = &sai1;
+ sai2 = &sai2;
+ sai3 = &sai3;
+ spi0 = &ecspi1;
+ spi1 = &ecspi2;
+ spi2 = &ecspi3;
+ spi3 = &ecspi4;
+ usbphy0 = &usbphy1;
+ usbphy1 = &usbphy2;
+ };
+
+ cpus {
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ cpu0: cpu@0 {
+ compatible = "arm,cortex-a7";
+ device_type = "cpu";
+ reg = <0>;
+ clock-latency = <61036>; /* two CLK32 periods */
+ operating-points = <
+ /* kHz uV */
+ 528000 1175000
+ 396000 1025000
+ 198000 950000
+ >;
+ fsl,soc-operating-points = <
+ /* KHz uV */
+ 528000 1175000
+ 396000 1175000
+ 198000 1175000
+ >;
+ clocks = <&clks IMX6UL_CLK_ARM>,
+ <&clks IMX6UL_CLK_PLL2_BUS>,
+ <&clks IMX6UL_CLK_PLL2_PFD2>,
+ <&clks IMX6UL_CA7_SECONDARY_SEL>,
+ <&clks IMX6UL_CLK_STEP>,
+ <&clks IMX6UL_CLK_PLL1_SW>,
+ <&clks IMX6UL_CLK_PLL1_SYS>,
+ <&clks IMX6UL_PLL1_BYPASS>,
+ <&clks IMX6UL_CLK_PLL1>,
+ <&clks IMX6UL_PLL1_BYPASS_SRC>,
+ <&clks IMX6UL_CLK_OSC>;
+ clock-names = "arm", "pll2_bus", "pll2_pfd2_396m",
+ "secondary_sel", "step", "pll1_sw",
+ "pll1_sys", "pll1_bypass", "pll1",
+ "pll1_bypass_src", "osc";
+ arm-supply = <®_arm>;
+ soc-supply = <®_soc>;
+ };
+ };
+
+ intc: interrupt-controller@00a01000 {
+ compatible = "arm,cortex-a7-gic";
+ #interrupt-cells = <3>;
+ interrupt-controller;
+ reg = <0x00a01000 0x1000>,
+ <0x00a02000 0x1000>,
+ <0x00a04000 0x2000>,
+ <0x00a06000 0x2000>;
+ };
+
+ ckil: clock-cli {
+ compatible = "fixed-clock";
+ #clock-cells = <0>;
+ clock-frequency = <32768>;
+ clock-output-names = "ckil";
+ };
+
+ osc: clock-osc {
+ compatible = "fixed-clock";
+ #clock-cells = <0>;
+ clock-frequency = <24000000>;
+ clock-output-names = "osc";
+ };
+
+ ipp_di0: clock-di0 {
+ compatible = "fixed-clock";
+ #clock-cells = <0>;
+ clock-frequency = <0>;
+ clock-output-names = "ipp_di0";
+ };
+
+ ipp_di1: clock-di1 {
+ compatible = "fixed-clock";
+ #clock-cells = <0>;
+ clock-frequency = <0>;
+ clock-output-names = "ipp_di1";
+ };
+
+ soc {
+ #address-cells = <1>;
+ #size-cells = <1>;
+ compatible = "simple-bus";
+ interrupt-parent = <&gpc>;
+ ranges;
+
+ pmu {
+ compatible = "arm,cortex-a7-pmu";
+ interrupts = <GIC_SPI 94 IRQ_TYPE_LEVEL_HIGH>;
+ status = "disabled";
+ };
+
+ ocram: sram@00900000 {
+ compatible = "mmio-sram";
+ reg = <0x00900000 0x20000>;
+ };
+
+ dma_apbh: dma-apbh@01804000 {
+ compatible = "fsl,imx6q-dma-apbh", "fsl,imx28-dma-apbh";
+ reg = <0x01804000 0x2000>;
+ interrupts = <0 13 IRQ_TYPE_LEVEL_HIGH>,
+ <0 13 IRQ_TYPE_LEVEL_HIGH>,
+ <0 13 IRQ_TYPE_LEVEL_HIGH>,
+ <0 13 IRQ_TYPE_LEVEL_HIGH>;
+ interrupt-names = "gpmi0", "gpmi1", "gpmi2", "gpmi3";
+ #dma-cells = <1>;
+ dma-channels = <4>;
+ clocks = <&clks IMX6UL_CLK_APBHDMA>;
+ };
+
+ gpmi: gpmi-nand@01806000 {
+ compatible = "fsl,imx6q-gpmi-nand";
+ #address-cells = <1>;
+ #size-cells = <1>;
+ reg = <0x01806000 0x2000>, <0x01808000 0x2000>;
+ reg-names = "gpmi-nand", "bch";
+ interrupts = <0 15 IRQ_TYPE_LEVEL_HIGH>;
+ interrupt-names = "bch";
+ clocks = <&clks IMX6UL_CLK_GPMI_IO>,
+ <&clks IMX6UL_CLK_GPMI_APB>,
+ <&clks IMX6UL_CLK_GPMI_BCH>,
+ <&clks IMX6UL_CLK_GPMI_BCH_APB>,
+ <&clks IMX6UL_CLK_PER_BCH>;
+ clock-names = "gpmi_io", "gpmi_apb", "gpmi_bch",
+ "gpmi_bch_apb", "per1_bch";
+ dmas = <&dma_apbh 0>;
+ dma-names = "rx-tx";
+ status = "disabled";
+ };
+
+ aips1: aips-bus@02000000 {
+ compatible = "fsl,aips-bus", "simple-bus";
+ #address-cells = <1>;
+ #size-cells = <1>;
+ reg = <0x02000000 0x100000>;
+ ranges;
+
+ spba-bus@02000000 {
+ compatible = "fsl,spba-bus", "simple-bus";
+ #address-cells = <1>;
+ #size-cells = <1>;
+ reg = <0x02000000 0x40000>;
+ ranges;
+
+ ecspi1: ecspi@02008000 {
+ #address-cells = <1>;
+ #size-cells = <0>;
+ compatible = "fsl,imx6ul-ecspi", "fsl,imx51-ecspi";
+ reg = <0x02008000 0x4000>;
+ interrupts = <GIC_SPI 31 IRQ_TYPE_LEVEL_HIGH>;
+ clocks = <&clks IMX6UL_CLK_ECSPI1>,
+ <&clks IMX6UL_CLK_ECSPI1>;
+ clock-names = "ipg", "per";
+ status = "disabled";
+ };
+
+ ecspi2: ecspi@0200c000 {
+ #address-cells = <1>;
+ #size-cells = <0>;
+ compatible = "fsl,imx6ul-ecspi", "fsl,imx51-ecspi";
+ reg = <0x0200c000 0x4000>;
+ interrupts = <GIC_SPI 32 IRQ_TYPE_LEVEL_HIGH>;
+ clocks = <&clks IMX6UL_CLK_ECSPI2>,
+ <&clks IMX6UL_CLK_ECSPI2>;
+ clock-names = "ipg", "per";
+ status = "disabled";
+ };
+
+ ecspi3: ecspi@02010000 {
+ #address-cells = <1>;
+ #size-cells = <0>;
+ compatible = "fsl,imx6ul-ecspi", "fsl,imx51-ecspi";
+ reg = <0x02010000 0x4000>;
+ interrupts = <GIC_SPI 33 IRQ_TYPE_LEVEL_HIGH>;
+ clocks = <&clks IMX6UL_CLK_ECSPI3>,
+ <&clks IMX6UL_CLK_ECSPI3>;
+ clock-names = "ipg", "per";
+ status = "disabled";
+ };
+
+ ecspi4: ecspi@02014000 {
+ #address-cells = <1>;
+ #size-cells = <0>;
+ compatible = "fsl,imx6ul-ecspi", "fsl,imx51-ecspi";
+ reg = <0x02014000 0x4000>;
+ interrupts = <GIC_SPI 34 IRQ_TYPE_LEVEL_HIGH>;
+ clocks = <&clks IMX6UL_CLK_ECSPI4>,
+ <&clks IMX6UL_CLK_ECSPI4>;
+ clock-names = "ipg", "per";
+ status = "disabled";
+ };
+
+ uart7: serial@02018000 {
+ compatible = "fsl,imx6ul-uart",
+ "fsl,imx6q-uart";
+ reg = <0x02018000 0x4000>;
+ interrupts = <GIC_SPI 39 IRQ_TYPE_LEVEL_HIGH>;
+ clocks = <&clks IMX6UL_CLK_UART7_IPG>,
+ <&clks IMX6UL_CLK_UART7_SERIAL>;
+ clock-names = "ipg", "per";
+ status = "disabled";
+ };
+
+ uart1: serial@02020000 {
+ compatible = "fsl,imx6ul-uart",
+ "fsl,imx6q-uart";
+ reg = <0x02020000 0x4000>;
+ interrupts = <GIC_SPI 26 IRQ_TYPE_LEVEL_HIGH>;
+ clocks = <&clks IMX6UL_CLK_UART1_IPG>,
+ <&clks IMX6UL_CLK_UART1_SERIAL>;
+ clock-names = "ipg", "per";
+ status = "disabled";
+ };
+
+ uart8: serial@02024000 {
+ compatible = "fsl,imx6ul-uart",
+ "fsl,imx6q-uart";
+ reg = <0x02024000 0x4000>;
+ interrupts = <GIC_SPI 40 IRQ_TYPE_LEVEL_HIGH>;
+ clocks = <&clks IMX6UL_CLK_UART8_IPG>,
+ <&clks IMX6UL_CLK_UART8_SERIAL>;
+ clock-names = "ipg", "per";
+ status = "disabled";
+ };
+
+ sai1: sai@02028000 {
+ #sound-dai-cells = <0>;
+ compatible = "fsl,imx6ul-sai", "fsl,imx6sx-sai";
+ reg = <0x02028000 0x4000>;
+ interrupts = <GIC_SPI 97 IRQ_TYPE_LEVEL_HIGH>;
+ clocks = <&clks IMX6UL_CLK_SAI1_IPG>,
+ <&clks IMX6UL_CLK_SAI1>,
+ <&clks IMX6UL_CLK_DUMMY>, <&clks IMX6UL_CLK_DUMMY>;
+ clock-names = "bus", "mclk1", "mclk2", "mclk3";
+ dmas = <&sdma 35 24 0>,
+ <&sdma 36 24 0>;
+ dma-names = "rx", "tx";
+ status = "disabled";
+ };
+
+ sai2: sai@0202c000 {
+ #sound-dai-cells = <0>;
+ compatible = "fsl,imx6ul-sai", "fsl,imx6sx-sai";
+ reg = <0x0202c000 0x4000>;
+ interrupts = <GIC_SPI 98 IRQ_TYPE_LEVEL_HIGH>;
+ clocks = <&clks IMX6UL_CLK_SAI2_IPG>,
+ <&clks IMX6UL_CLK_SAI2>,
+ <&clks IMX6UL_CLK_DUMMY>, <&clks IMX6UL_CLK_DUMMY>;
+ clock-names = "bus", "mclk1", "mclk2", "mclk3";
+ dmas = <&sdma 37 24 0>,
+ <&sdma 38 24 0>;
+ dma-names = "rx", "tx";
+ status = "disabled";
+ };
+
+ sai3: sai@02030000 {
+ #sound-dai-cells = <0>;
+ compatible = "fsl,imx6ul-sai", "fsl,imx6sx-sai";
+ reg = <0x02030000 0x4000>;
+ interrupts = <GIC_SPI 24 IRQ_TYPE_LEVEL_HIGH>;
+ clocks = <&clks IMX6UL_CLK_SAI3_IPG>,
+ <&clks IMX6UL_CLK_SAI3>,
+ <&clks IMX6UL_CLK_DUMMY>, <&clks IMX6UL_CLK_DUMMY>;
+ clock-names = "bus", "mclk1", "mclk2", "mclk3";
+ dmas = <&sdma 39 24 0>,
+ <&sdma 40 24 0>;
+ dma-names = "rx", "tx";
+ status = "disabled";
+ };
+ };
+
+ tsc: tsc@02040000 {
+ compatible = "fsl,imx6ul-tsc";
+ reg = <0x02040000 0x4000>, <0x0219c000 0x4000>;
+ interrupts = <GIC_SPI 3 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 101 IRQ_TYPE_LEVEL_HIGH>;
+ clocks = <&clks IMX6UL_CLK_IPG>,
+ <&clks IMX6UL_CLK_ADC2>;
+ clock-names = "tsc", "adc";
+ status = "disabled";
+ };
+
+ pwm1: pwm@02080000 {
+ compatible = "fsl,imx6ul-pwm", "fsl,imx27-pwm";
+ reg = <0x02080000 0x4000>;
+ interrupts = <GIC_SPI 115 IRQ_TYPE_LEVEL_HIGH>;
+ clocks = <&clks IMX6UL_CLK_PWM1>,
+ <&clks IMX6UL_CLK_PWM1>;
+ clock-names = "ipg", "per";
+ #pwm-cells = <2>;
+ status = "disabled";
+ };
+
+ pwm2: pwm@02084000 {
+ compatible = "fsl,imx6ul-pwm", "fsl,imx27-pwm";
+ reg = <0x02084000 0x4000>;
+ interrupts = <GIC_SPI 116 IRQ_TYPE_LEVEL_HIGH>;
+ clocks = <&clks IMX6UL_CLK_PWM2>,
+ <&clks IMX6UL_CLK_PWM2>;
+ clock-names = "ipg", "per";
+ #pwm-cells = <2>;
+ status = "disabled";
+ };
+
+ pwm3: pwm@02088000 {
+ compatible = "fsl,imx6ul-pwm", "fsl,imx27-pwm";
+ reg = <0x02088000 0x4000>;
+ interrupts = <GIC_SPI 117 IRQ_TYPE_LEVEL_HIGH>;
+ clocks = <&clks IMX6UL_CLK_PWM3>,
+ <&clks IMX6UL_CLK_PWM3>;
+ clock-names = "ipg", "per";
+ #pwm-cells = <2>;
+ status = "disabled";
+ };
+
+ pwm4: pwm@0208c000 {
+ compatible = "fsl,imx6ul-pwm", "fsl,imx27-pwm";
+ reg = <0x0208c000 0x4000>;
+ interrupts = <GIC_SPI 118 IRQ_TYPE_LEVEL_HIGH>;
+ clocks = <&clks IMX6UL_CLK_PWM4>,
+ <&clks IMX6UL_CLK_PWM4>;
+ clock-names = "ipg", "per";
+ #pwm-cells = <2>;
+ status = "disabled";
+ };
+
+ can1: flexcan@02090000 {
+ compatible = "fsl,imx6ul-flexcan", "fsl,imx6q-flexcan";
+ reg = <0x02090000 0x4000>;
+ interrupts = <GIC_SPI 110 IRQ_TYPE_LEVEL_HIGH>;
+ clocks = <&clks IMX6UL_CLK_CAN1_IPG>,
+ <&clks IMX6UL_CLK_CAN1_SERIAL>;
+ clock-names = "ipg", "per";
+ status = "disabled";
+ };
+
+ can2: flexcan@02094000 {
+ compatible = "fsl,imx6ul-flexcan", "fsl,imx6q-flexcan";
+ reg = <0x02094000 0x4000>;
+ interrupts = <GIC_SPI 111 IRQ_TYPE_LEVEL_HIGH>;
+ clocks = <&clks IMX6UL_CLK_CAN2_IPG>,
+ <&clks IMX6UL_CLK_CAN2_SERIAL>;
+ clock-names = "ipg", "per";
+ status = "disabled";
+ };
+
+ gpt1: gpt@02098000 {
+ compatible = "fsl,imx6ul-gpt", "fsl,imx6sx-gpt";
+ reg = <0x02098000 0x4000>;
+ interrupts = <GIC_SPI 55 IRQ_TYPE_LEVEL_HIGH>;
+ clocks = <&clks IMX6UL_CLK_GPT1_BUS>,
+ <&clks IMX6UL_CLK_GPT1_SERIAL>;
+ clock-names = "ipg", "per";
+ };
+
+ gpio1: gpio@0209c000 {
+ compatible = "fsl,imx6ul-gpio", "fsl,imx35-gpio";
+ reg = <0x0209c000 0x4000>;
+ interrupts = <GIC_SPI 66 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 67 IRQ_TYPE_LEVEL_HIGH>;
+ gpio-controller;
+ #gpio-cells = <2>;
+ interrupt-controller;
+ #interrupt-cells = <2>;
+ gpio-ranges = <&iomuxc 0 23 10>, <&iomuxc 10 17 6>,
+ <&iomuxc 16 33 16>;
+ };
+
+ gpio2: gpio@020a0000 {
+ compatible = "fsl,imx6ul-gpio", "fsl,imx35-gpio";
+ reg = <0x020a0000 0x4000>;
+ interrupts = <GIC_SPI 68 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 69 IRQ_TYPE_LEVEL_HIGH>;
+ gpio-controller;
+ #gpio-cells = <2>;
+ interrupt-controller;
+ #interrupt-cells = <2>;
+ gpio-ranges = <&iomuxc 0 49 16>, <&iomuxc 16 111 6>;
+ };
+
+ gpio3: gpio@020a4000 {
+ compatible = "fsl,imx6ul-gpio", "fsl,imx35-gpio";
+ reg = <0x020a4000 0x4000>;
+ interrupts = <GIC_SPI 70 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 71 IRQ_TYPE_LEVEL_HIGH>;
+ gpio-controller;
+ #gpio-cells = <2>;
+ interrupt-controller;
+ #interrupt-cells = <2>;
+ gpio-ranges = <&iomuxc 0 65 29>;
+ };
+
+ gpio4: gpio@020a8000 {
+ compatible = "fsl,imx6ul-gpio", "fsl,imx35-gpio";
+ reg = <0x020a8000 0x4000>;
+ interrupts = <GIC_SPI 72 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 73 IRQ_TYPE_LEVEL_HIGH>;
+ gpio-controller;
+ #gpio-cells = <2>;
+ interrupt-controller;
+ #interrupt-cells = <2>;
+ gpio-ranges = <&iomuxc 0 94 17>, <&iomuxc 17 117 12>;
+ };
+
+ gpio5: gpio@020ac000 {
+ compatible = "fsl,imx6ul-gpio", "fsl,imx35-gpio";
+ reg = <0x020ac000 0x4000>;
+ interrupts = <GIC_SPI 74 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 75 IRQ_TYPE_LEVEL_HIGH>;
+ gpio-controller;
+ #gpio-cells = <2>;
+ interrupt-controller;
+ #interrupt-cells = <2>;
+ gpio-ranges = <&iomuxc 0 7 10>, <&iomuxc 10 5 2>;
+ };
+
+ fec2: ethernet@020b4000 {
+ compatible = "fsl,imx6ul-fec", "fsl,imx6q-fec";
+ reg = <0x020b4000 0x4000>;
+ interrupts = <GIC_SPI 120 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 121 IRQ_TYPE_LEVEL_HIGH>;
+ clocks = <&clks IMX6UL_CLK_ENET>,
+ <&clks IMX6UL_CLK_ENET_AHB>,
+ <&clks IMX6UL_CLK_ENET_PTP>,
+ <&clks IMX6UL_CLK_ENET2_REF_125M>,
+ <&clks IMX6UL_CLK_ENET2_REF_125M>;
+ clock-names = "ipg", "ahb", "ptp",
+ "enet_clk_ref", "enet_out";
+ fsl,num-tx-queues=<1>;
+ fsl,num-rx-queues=<1>;
+ status = "disabled";
+ };
+
+ kpp: kpp@020b8000 {
+ compatible = "fsl,imx6ul-kpp", "fsl,imx6q-kpp", "fsl,imx21-kpp";
+ reg = <0x020b8000 0x4000>;
+ interrupts = <GIC_SPI 82 IRQ_TYPE_LEVEL_HIGH>;
+ clocks = <&clks IMX6UL_CLK_KPP>;
+ status = "disabled";
+ };
+
+ wdog1: wdog@020bc000 {
+ compatible = "fsl,imx6ul-wdt", "fsl,imx21-wdt";
+ reg = <0x020bc000 0x4000>;
+ interrupts = <GIC_SPI 80 IRQ_TYPE_LEVEL_HIGH>;
+ clocks = <&clks IMX6UL_CLK_WDOG1>;
+ };
+
+ wdog2: wdog@020c0000 {
+ compatible = "fsl,imx6ul-wdt", "fsl,imx21-wdt";
+ reg = <0x020c0000 0x4000>;
+ interrupts = <GIC_SPI 81 IRQ_TYPE_LEVEL_HIGH>;
+ clocks = <&clks IMX6UL_CLK_WDOG2>;
+ status = "disabled";
+ };
+
+ clks: ccm@020c4000 {
+ compatible = "fsl,imx6ul-ccm";
+ reg = <0x020c4000 0x4000>;
+ interrupts = <GIC_SPI 87 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 88 IRQ_TYPE_LEVEL_HIGH>;
+ #clock-cells = <1>;
+ clocks = <&ckil>, <&osc>, <&ipp_di0>, <&ipp_di1>;
+ clock-names = "ckil", "osc", "ipp_di0", "ipp_di1";
+ };
+
+ anatop: anatop@020c8000 {
+ compatible = "fsl,imx6ul-anatop", "fsl,imx6q-anatop",
+ "syscon", "simple-bus";
+ reg = <0x020c8000 0x1000>;
+ interrupts = <GIC_SPI 49 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 54 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 127 IRQ_TYPE_LEVEL_HIGH>;
+
+ reg_3p0: regulator-3p0 {
+ compatible = "fsl,anatop-regulator";
+ regulator-name = "vdd3p0";
+ regulator-min-microvolt = <2625000>;
+ regulator-max-microvolt = <3400000>;
+ anatop-reg-offset = <0x120>;
+ anatop-vol-bit-shift = <8>;
+ anatop-vol-bit-width = <5>;
+ anatop-min-bit-val = <0>;
+ anatop-min-voltage = <2625000>;
+ anatop-max-voltage = <3400000>;
+ anatop-enable-bit = <0>;
+ };
+
+ reg_arm: regulator-vddcore {
+ compatible = "fsl,anatop-regulator";
+ regulator-name = "cpu";
+ regulator-min-microvolt = <725000>;
+ regulator-max-microvolt = <1450000>;
+ regulator-always-on;
+ anatop-reg-offset = <0x140>;
+ anatop-vol-bit-shift = <0>;
+ anatop-vol-bit-width = <5>;
+ anatop-delay-reg-offset = <0x170>;
+ anatop-delay-bit-shift = <24>;
+ anatop-delay-bit-width = <2>;
+ anatop-min-bit-val = <1>;
+ anatop-min-voltage = <725000>;
+ anatop-max-voltage = <1450000>;
+ };
+
+ reg_soc: regulator-vddsoc {
+ compatible = "fsl,anatop-regulator";
+ regulator-name = "vddsoc";
+ regulator-min-microvolt = <725000>;
+ regulator-max-microvolt = <1450000>;
+ regulator-always-on;
+ anatop-reg-offset = <0x140>;
+ anatop-vol-bit-shift = <18>;
+ anatop-vol-bit-width = <5>;
+ anatop-delay-reg-offset = <0x170>;
+ anatop-delay-bit-shift = <28>;
+ anatop-delay-bit-width = <2>;
+ anatop-min-bit-val = <1>;
+ anatop-min-voltage = <725000>;
+ anatop-max-voltage = <1450000>;
+ };
+ };
+
+ usbphy1: usbphy@020c9000 {
+ compatible = "fsl,imx6ul-usbphy", "fsl,imx23-usbphy";
+ reg = <0x020c9000 0x1000>;
+ interrupts = <GIC_SPI 44 IRQ_TYPE_LEVEL_HIGH>;
+ clocks = <&clks IMX6UL_CLK_USBPHY1>;
+ phy-3p0-supply = <®_3p0>;
+ fsl,anatop = <&anatop>;
+ };
+
+ usbphy2: usbphy@020ca000 {
+ compatible = "fsl,imx6ul-usbphy", "fsl,imx23-usbphy";
+ reg = <0x020ca000 0x1000>;
+ interrupts = <GIC_SPI 45 IRQ_TYPE_LEVEL_HIGH>;
+ clocks = <&clks IMX6UL_CLK_USBPHY2>;
+ phy-3p0-supply = <®_3p0>;
+ fsl,anatop = <&anatop>;
+ };
+
+ snvs: snvs@020cc000 {
+ compatible = "fsl,sec-v4.0-mon", "syscon", "simple-mfd";
+ reg = <0x020cc000 0x4000>;
+
+ snvs_rtc: snvs-rtc-lp {
+ compatible = "fsl,sec-v4.0-mon-rtc-lp";
+ regmap = <&snvs>;
+ offset = <0x34>;
+ interrupts = <GIC_SPI 19 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 20 IRQ_TYPE_LEVEL_HIGH>;
+ };
+
+ snvs_poweroff: snvs-poweroff {
+ compatible = "syscon-poweroff";
+ regmap = <&snvs>;
+ offset = <0x38>;
+ mask = <0x60>;
+ status = "disabled";
+ };
+
+ snvs_pwrkey: snvs-powerkey {
+ compatible = "fsl,sec-v4.0-pwrkey";
+ regmap = <&snvs>;
+ interrupts = <GIC_SPI 4 IRQ_TYPE_LEVEL_HIGH>;
+ linux,keycode = <KEY_POWER>;
+ wakeup-source;
+ };
+ };
+
+ epit1: epit@020d0000 {
+ reg = <0x020d0000 0x4000>;
+ interrupts = <GIC_SPI 56 IRQ_TYPE_LEVEL_HIGH>;
+ };
+
+ epit2: epit@020d4000 {
+ reg = <0x020d4000 0x4000>;
+ interrupts = <GIC_SPI 57 IRQ_TYPE_LEVEL_HIGH>;
+ };
+
+ src: src@020d8000 {
+ compatible = "fsl,imx6ul-src", "fsl,imx51-src";
+ reg = <0x020d8000 0x4000>;
+ interrupts = <GIC_SPI 91 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 96 IRQ_TYPE_LEVEL_HIGH>;
+ #reset-cells = <1>;
+ };
+
+ gpc: gpc@020dc000 {
+ compatible = "fsl,imx6ul-gpc", "fsl,imx6q-gpc";
+ reg = <0x020dc000 0x4000>;
+ interrupt-controller;
+ #interrupt-cells = <3>;
+ interrupts = <GIC_SPI 89 IRQ_TYPE_LEVEL_HIGH>;
+ interrupt-parent = <&intc>;
+ };
+
+ iomuxc: iomuxc@020e0000 {
+ compatible = "fsl,imx6ul-iomuxc";
+ reg = <0x020e0000 0x4000>;
+ };
+
+ gpr: iomuxc-gpr@020e4000 {
+ compatible = "fsl,imx6ul-iomuxc-gpr",
+ "fsl,imx6q-iomuxc-gpr", "syscon";
+ reg = <0x020e4000 0x4000>;
+ };
+
+ gpt2: gpt@020e8000 {
+ compatible = "fsl,imx6ul-gpt", "fsl,imx6sx-gpt";
+ reg = <0x020e8000 0x4000>;
+ interrupts = <GIC_SPI 109 IRQ_TYPE_LEVEL_HIGH>;
+ clocks = <&clks IMX6UL_CLK_GPT2_BUS>,
+ <&clks IMX6UL_CLK_GPT2_SERIAL>;
+ clock-names = "ipg", "per";
+ };
+
+ sdma: sdma@020ec000 {
+ compatible = "fsl,imx6ul-sdma", "fsl,imx6q-sdma",
+ "fsl,imx35-sdma";
+ reg = <0x020ec000 0x4000>;
+ interrupts = <GIC_SPI 2 IRQ_TYPE_LEVEL_HIGH>;
+ clocks = <&clks IMX6UL_CLK_SDMA>,
+ <&clks IMX6UL_CLK_SDMA>;
+ clock-names = "ipg", "ahb";
+ #dma-cells = <3>;
+ fsl,sdma-ram-script-name = "imx/sdma/sdma-imx6q.bin";
+ };
+
+ pwm5: pwm@020f0000 {
+ compatible = "fsl,imx6ul-pwm", "fsl,imx27-pwm";
+ reg = <0x020f0000 0x4000>;
+ interrupts = <GIC_SPI 114 IRQ_TYPE_LEVEL_HIGH>;
+ clocks = <&clks IMX6UL_CLK_PWM5>,
+ <&clks IMX6UL_CLK_PWM5>;
+ clock-names = "ipg", "per";
+ #pwm-cells = <2>;
+ status = "disabled";
+ };
+
+ pwm6: pwm@020f4000 {
+ compatible = "fsl,imx6ul-pwm", "fsl,imx27-pwm";
+ reg = <0x020f4000 0x4000>;
+ interrupts = <GIC_SPI 115 IRQ_TYPE_LEVEL_HIGH>;
+ clocks = <&clks IMX6UL_CLK_PWM6>,
+ <&clks IMX6UL_CLK_PWM6>;
+ clock-names = "ipg", "per";
+ #pwm-cells = <2>;
+ status = "disabled";
+ };
+
+ pwm7: pwm@020f8000 {
+ compatible = "fsl,imx6ul-pwm", "fsl,imx27-pwm";
+ reg = <0x020f8000 0x4000>;
+ interrupts = <GIC_SPI 116 IRQ_TYPE_LEVEL_HIGH>;
+ clocks = <&clks IMX6UL_CLK_PWM7>,
+ <&clks IMX6UL_CLK_PWM7>;
+ clock-names = "ipg", "per";
+ #pwm-cells = <2>;
+ status = "disabled";
+ };
+
+ pwm8: pwm@020fc000 {
+ compatible = "fsl,imx6ul-pwm", "fsl,imx27-pwm";
+ reg = <0x020fc000 0x4000>;
+ interrupts = <GIC_SPI 117 IRQ_TYPE_LEVEL_HIGH>;
+ clocks = <&clks IMX6UL_CLK_PWM8>,
+ <&clks IMX6UL_CLK_PWM8>;
+ clock-names = "ipg", "per";
+ #pwm-cells = <2>;
+ status = "disabled";
+ };
+ };
+
+ aips2: aips-bus@02100000 {
+ compatible = "fsl,aips-bus", "simple-bus";
+ #address-cells = <1>;
+ #size-cells = <1>;
+ reg = <0x02100000 0x100000>;
+ ranges;
+
+ usbotg1: usb@02184000 {
+ compatible = "fsl,imx6ul-usb", "fsl,imx27-usb";
+ reg = <0x02184000 0x200>;
+ interrupts = <GIC_SPI 43 IRQ_TYPE_LEVEL_HIGH>;
+ clocks = <&clks IMX6UL_CLK_USBOH3>;
+ fsl,usbphy = <&usbphy1>;
+ fsl,usbmisc = <&usbmisc 0>;
+ fsl,anatop = <&anatop>;
+ ahb-burst-config = <0x0>;
+ tx-burst-size-dword = <0x10>;
+ rx-burst-size-dword = <0x10>;
+ status = "disabled";
+ };
+
+ usbotg2: usb@02184200 {
+ compatible = "fsl,imx6ul-usb", "fsl,imx27-usb";
+ reg = <0x02184200 0x200>;
+ interrupts = <GIC_SPI 42 IRQ_TYPE_LEVEL_HIGH>;
+ clocks = <&clks IMX6UL_CLK_USBOH3>;
+ fsl,usbphy = <&usbphy2>;
+ fsl,usbmisc = <&usbmisc 1>;
+ ahb-burst-config = <0x0>;
+ tx-burst-size-dword = <0x10>;
+ rx-burst-size-dword = <0x10>;
+ status = "disabled";
+ };
+
+ usbmisc: usbmisc@02184800 {
+ #index-cells = <1>;
+ compatible = "fsl,imx6ul-usbmisc", "fsl,imx6q-usbmisc";
+ reg = <0x02184800 0x200>;
+ };
+
+ fec1: ethernet@02188000 {
+ compatible = "fsl,imx6ul-fec", "fsl,imx6q-fec";
+ reg = <0x02188000 0x4000>;
+ interrupts = <GIC_SPI 118 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 119 IRQ_TYPE_LEVEL_HIGH>;
+ clocks = <&clks IMX6UL_CLK_ENET>,
+ <&clks IMX6UL_CLK_ENET_AHB>,
+ <&clks IMX6UL_CLK_ENET_PTP>,
+ <&clks IMX6UL_CLK_ENET_REF>,
+ <&clks IMX6UL_CLK_ENET_REF>;
+ clock-names = "ipg", "ahb", "ptp",
+ "enet_clk_ref", "enet_out";
+ fsl,num-tx-queues=<1>;
+ fsl,num-rx-queues=<1>;
+ status = "disabled";
+ };
+
+ usdhc1: usdhc@02190000 {
+ compatible = "fsl,imx6ul-usdhc", "fsl,imx6sx-usdhc";
+ reg = <0x02190000 0x4000>;
+ interrupts = <GIC_SPI 22 IRQ_TYPE_LEVEL_HIGH>;
+ clocks = <&clks IMX6UL_CLK_USDHC1>,
+ <&clks IMX6UL_CLK_USDHC1>,
+ <&clks IMX6UL_CLK_USDHC1>;
+ clock-names = "ipg", "ahb", "per";
+ bus-width = <4>;
+ status = "disabled";
+ };
+
+ usdhc2: usdhc@02194000 {
+ compatible = "fsl,imx6ul-usdhc", "fsl,imx6sx-usdhc";
+ reg = <0x02194000 0x4000>;
+ interrupts = <GIC_SPI 23 IRQ_TYPE_LEVEL_HIGH>;
+ clocks = <&clks IMX6UL_CLK_USDHC2>,
+ <&clks IMX6UL_CLK_USDHC2>,
+ <&clks IMX6UL_CLK_USDHC2>;
+ clock-names = "ipg", "ahb", "per";
+ bus-width = <4>;
+ status = "disabled";
+ };
+
+ adc1: adc@02198000 {
+ compatible = "fsl,imx6ul-adc", "fsl,vf610-adc";
+ reg = <0x02198000 0x4000>;
+ interrupts = <GIC_SPI 100 IRQ_TYPE_LEVEL_HIGH>;
+ clocks = <&clks IMX6UL_CLK_ADC1>;
+ num-channels = <2>;
+ clock-names = "adc";
+ fsl,adck-max-frequency = <30000000>, <40000000>,
+ <20000000>;
+ status = "disabled";
+ };
+
+ i2c1: i2c@021a0000 {
+ #address-cells = <1>;
+ #size-cells = <0>;
+ compatible = "fsl,imx6ul-i2c", "fsl,imx21-i2c";
+ reg = <0x021a0000 0x4000>;
+ interrupts = <GIC_SPI 36 IRQ_TYPE_LEVEL_HIGH>;
+ clocks = <&clks IMX6UL_CLK_I2C1>;
+ status = "disabled";
+ };
+
+ i2c2: i2c@021a4000 {
+ #address-cells = <1>;
+ #size-cells = <0>;
+ compatible = "fsl,imx6ul-i2c", "fsl,imx21-i2c";
+ reg = <0x021a4000 0x4000>;
+ interrupts = <GIC_SPI 37 IRQ_TYPE_LEVEL_HIGH>;
+ clocks = <&clks IMX6UL_CLK_I2C2>;
+ status = "disabled";
+ };
+
+ i2c3: i2c@021a8000 {
+ #address-cells = <1>;
+ #size-cells = <0>;
+ compatible = "fsl,imx6ul-i2c", "fsl,imx21-i2c";
+ reg = <0x021a8000 0x4000>;
+ interrupts = <GIC_SPI 38 IRQ_TYPE_LEVEL_HIGH>;
+ clocks = <&clks IMX6UL_CLK_I2C3>;
+ status = "disabled";
+ };
+
+ mmdc: mmdc@021b0000 {
+ compatible = "fsl,imx6ul-mmdc", "fsl,imx6q-mmdc";
+ reg = <0x021b0000 0x4000>;
+ };
+
+ lcdif: lcdif@021c8000 {
+ compatible = "fsl,imx6ul-lcdif", "fsl,imx28-lcdif";
+ reg = <0x021c8000 0x4000>;
+ interrupts = <GIC_SPI 5 IRQ_TYPE_LEVEL_HIGH>;
+ clocks = <&clks IMX6UL_CLK_LCDIF_PIX>,
+ <&clks IMX6UL_CLK_LCDIF_APB>,
+ <&clks IMX6UL_CLK_DUMMY>;
+ clock-names = "pix", "axi", "disp_axi";
+ status = "disabled";
+ };
+
+ qspi: qspi@021e0000 {
+ #address-cells = <1>;
+ #size-cells = <0>;
+ compatible = "fsl,imx6ul-qspi", "fsl,imx6sx-qspi";
+ reg = <0x021e0000 0x4000>, <0x60000000 0x10000000>;
+ reg-names = "QuadSPI", "QuadSPI-memory";
+ interrupts = <GIC_SPI 107 IRQ_TYPE_LEVEL_HIGH>;
+ clocks = <&clks IMX6UL_CLK_QSPI>,
+ <&clks IMX6UL_CLK_QSPI>;
+ clock-names = "qspi_en", "qspi";
+ status = "disabled";
+ };
+
+ uart2: serial@021e8000 {
+ compatible = "fsl,imx6ul-uart",
+ "fsl,imx6q-uart";
+ reg = <0x021e8000 0x4000>;
+ interrupts = <GIC_SPI 27 IRQ_TYPE_LEVEL_HIGH>;
+ clocks = <&clks IMX6UL_CLK_UART2_IPG>,
+ <&clks IMX6UL_CLK_UART2_SERIAL>;
+ clock-names = "ipg", "per";
+ status = "disabled";
+ };
+
+ uart3: serial@021ec000 {
+ compatible = "fsl,imx6ul-uart",
+ "fsl,imx6q-uart";
+ reg = <0x021ec000 0x4000>;
+ interrupts = <GIC_SPI 28 IRQ_TYPE_LEVEL_HIGH>;
+ clocks = <&clks IMX6UL_CLK_UART3_IPG>,
+ <&clks IMX6UL_CLK_UART3_SERIAL>;
+ clock-names = "ipg", "per";
+ status = "disabled";
+ };
+
+ uart4: serial@021f0000 {
+ compatible = "fsl,imx6ul-uart",
+ "fsl,imx6q-uart";
+ reg = <0x021f0000 0x4000>;
+ interrupts = <GIC_SPI 29 IRQ_TYPE_LEVEL_HIGH>;
+ clocks = <&clks IMX6UL_CLK_UART4_IPG>,
+ <&clks IMX6UL_CLK_UART4_SERIAL>;
+ clock-names = "ipg", "per";
+ status = "disabled";
+ };
+
+ uart5: serial@021f4000 {
+ compatible = "fsl,imx6ul-uart",
+ "fsl,imx6q-uart";
+ reg = <0x021f4000 0x4000>;
+ interrupts = <GIC_SPI 30 IRQ_TYPE_LEVEL_HIGH>;
+ clocks = <&clks IMX6UL_CLK_UART5_IPG>,
+ <&clks IMX6UL_CLK_UART5_SERIAL>;
+ clock-names = "ipg", "per";
+ status = "disabled";
+ };
+
+ i2c4: i2c@021f8000 {
+ #address-cells = <1>;
+ #size-cells = <0>;
+ compatible = "fsl,imx6ul-i2c", "fsl,imx21-i2c";
+ reg = <0x021f8000 0x4000>;
+ interrupts = <GIC_SPI 35 IRQ_TYPE_LEVEL_HIGH>;
+ clocks = <&clks IMX6UL_CLK_I2C4>;
+ status = "disabled";
+ };
+
+ uart6: serial@021fc000 {
+ compatible = "fsl,imx6ul-uart",
+ "fsl,imx6q-uart";
+ reg = <0x021fc000 0x4000>;
+ interrupts = <GIC_SPI 17 IRQ_TYPE_LEVEL_HIGH>;
+ clocks = <&clks IMX6UL_CLK_UART6_IPG>,
+ <&clks IMX6UL_CLK_UART6_SERIAL>;
+ clock-names = "ipg", "per";
+ status = "disabled";
+ };
+ };
+ };
+};
diff --git a/arch/arm/dts/sunxi-u-boot.dtsi b/arch/arm/dts/sunxi-u-boot.dtsi
new file mode 100644
index 0000000..5adfd9b
--- /dev/null
+++ b/arch/arm/dts/sunxi-u-boot.dtsi
@@ -0,0 +1,14 @@
+#include <config.h>
+
+/ {
+ binman {
+ filename = "u-boot-sunxi-with-spl.bin";
+ pad-byte = <0xff>;
+ blob {
+ filename = "spl/sunxi-spl.bin";
+ };
+ u-boot-img {
+ pos = <CONFIG_SPL_PAD_TO>;
+ };
+ };
+};
diff --git a/arch/arm/dts/tegra124-nyan-big-u-boot.dtsi b/arch/arm/dts/tegra124-nyan-big-u-boot.dtsi
new file mode 100644
index 0000000..fff1d78
--- /dev/null
+++ b/arch/arm/dts/tegra124-nyan-big-u-boot.dtsi
@@ -0,0 +1,15 @@
+/*
+ * Copyright (C) 2016 Google, Inc
+ * Written by Simon Glass <sjg@chromium.org>
+ *
+ * SPDX-License-Identifier: GPL-2.0+
+ */
+
+/ {
+ host1x@50000000 {
+ u-boot,dm-pre-reloc;
+ dc@54200000 {
+ u-boot,dm-pre-reloc;
+ };
+ };
+};
diff --git a/arch/arm/dts/tegra124-nyan-big.dts b/arch/arm/dts/tegra124-nyan-big.dts
index 3758395..62f89d0 100644
--- a/arch/arm/dts/tegra124-nyan-big.dts
+++ b/arch/arm/dts/tegra124-nyan-big.dts
@@ -27,9 +27,7 @@
};
host1x@50000000 {
- u-boot,dm-pre-reloc;
dc@54200000 {
- u-boot,dm-pre-reloc;
display-timings {
timing@0 {
clock-frequency = <69500000>;
diff --git a/arch/arm/dts/tegra20-u-boot.dtsi b/arch/arm/dts/tegra20-u-boot.dtsi
new file mode 100644
index 0000000..9b9835d
--- /dev/null
+++ b/arch/arm/dts/tegra20-u-boot.dtsi
@@ -0,0 +1,8 @@
+/ {
+ host1x@50000000 {
+ u-boot,dm-pre-reloc;
+ dc@54200000 {
+ u-boot,dm-pre-reloc;
+ };
+ };
+};
diff --git a/arch/arm/dts/tegra20.dtsi b/arch/arm/dts/tegra20.dtsi
index 84bb1b0..e21ee25 100644
--- a/arch/arm/dts/tegra20.dtsi
+++ b/arch/arm/dts/tegra20.dtsi
@@ -10,7 +10,6 @@
interrupt-parent = <&lic>;
host1x@50000000 {
- u-boot,dm-pre-reloc;
compatible = "nvidia,tegra20-host1x", "simple-bus";
reg = <0x50000000 0x00024000>;
interrupts = <GIC_SPI 65 IRQ_TYPE_LEVEL_HIGH>, /* syncpt */
@@ -78,7 +77,6 @@
};
dc@54200000 {
- u-boot,dm-pre-reloc;
compatible = "nvidia,tegra20-dc";
reg = <0x54200000 0x00040000>;
interrupts = <GIC_SPI 73 IRQ_TYPE_LEVEL_HIGH>;
diff --git a/arch/arm/dts/vf.dtsi b/arch/arm/dts/vf.dtsi
index 000aff2..477d8de 100644
--- a/arch/arm/dts/vf.dtsi
+++ b/arch/arm/dts/vf.dtsi
@@ -35,6 +35,7 @@
compatible = "fsl,aips-bus", "simple-bus";
#address-cells = <1>;
#size-cells = <1>;
+ reg = <0x40000000 0x00070000>;
ranges;
uart0: serial@40027000 {
@@ -130,6 +131,7 @@
compatible = "fsl,aips-bus", "simple-bus";
#address-cells = <1>;
#size-cells = <1>;
+ reg = <0x40080000 0x0007f000>;
ranges;
uart4: serial@400a9000 {
diff --git a/arch/arm/dts/zynq-7000.dtsi b/arch/arm/dts/zynq-7000.dtsi
index 6df0329..668f54e 100644
--- a/arch/arm/dts/zynq-7000.dtsi
+++ b/arch/arm/dts/zynq-7000.dtsi
@@ -16,7 +16,7 @@
#address-cells = <1>;
#size-cells = <0>;
- cpu@0 {
+ cpu0: cpu@0 {
compatible = "arm,cortex-a9";
device_type = "cpu";
reg = <0>;
@@ -30,7 +30,7 @@
>;
};
- cpu@1 {
+ cpu1: cpu@1 {
compatible = "arm,cortex-a9";
device_type = "cpu";
reg = <1>;
diff --git a/arch/arm/dts/zynqmp.dtsi b/arch/arm/dts/zynqmp.dtsi
index ab5c243..de1f160 100644
--- a/arch/arm/dts/zynqmp.dtsi
+++ b/arch/arm/dts/zynqmp.dtsi
@@ -7,6 +7,7 @@
*
* SPDX-License-Identifier: GPL-2.0+
*/
+
/ {
compatible = "xlnx,zynqmp";
#address-cells = <2>;
diff --git a/arch/arm/imx-common/cache.c b/arch/arm/imx-common/cache.c
index b775488..1c4a9a2 100644
--- a/arch/arm/imx-common/cache.c
+++ b/arch/arm/imx-common/cache.c
@@ -8,6 +8,7 @@
#include <asm/armv7.h>
#include <asm/pl310.h>
#include <asm/io.h>
+#include <asm/imx-common/sys_proto.h>
#ifndef CONFIG_SYS_DCACHE_OFF
void enable_caches(void)
@@ -39,6 +40,7 @@
void v7_outer_cache_enable(void)
{
struct pl310_regs *const pl310 = (struct pl310_regs *)L2_PL310_BASE;
+ struct iomuxc *iomux = (struct iomuxc *)IOMUXC_BASE_ADDR;
unsigned int val;
@@ -55,15 +57,14 @@
*/
setbits_le32(&pl310->pl310_aux_ctrl, L310_SHARED_ATT_OVERRIDE_ENABLE);
-#if defined CONFIG_MX6SL
- struct iomuxc *iomux = (struct iomuxc *)IOMUXC_BASE_ADDR;
- val = readl(&iomux->gpr[11]);
- if (val & IOMUXC_GPR11_L2CACHE_AS_OCRAM) {
- /* L2 cache configured as OCRAM, reset it */
- val &= ~IOMUXC_GPR11_L2CACHE_AS_OCRAM;
- writel(val, &iomux->gpr[11]);
+ if (is_mx6sl() || is_mx6sll()) {
+ val = readl(&iomux->gpr[11]);
+ if (val & IOMUXC_GPR11_L2CACHE_AS_OCRAM) {
+ /* L2 cache configured as OCRAM, reset it */
+ val &= ~IOMUXC_GPR11_L2CACHE_AS_OCRAM;
+ writel(val, &iomux->gpr[11]);
+ }
}
-#endif
writel(0x132, &pl310->pl310_tag_latency_ctrl);
writel(0x132, &pl310->pl310_data_latency_ctrl);
diff --git a/arch/arm/imx-common/cpu.c b/arch/arm/imx-common/cpu.c
index 632faca..40fe813 100644
--- a/arch/arm/imx-common/cpu.c
+++ b/arch/arm/imx-common/cpu.c
@@ -155,6 +155,8 @@
return "6SOLO"; /* Solo version of the mx6 */
case MXC_CPU_MX6SL:
return "6SL"; /* Solo-Lite version of the mx6 */
+ case MXC_CPU_MX6SLL:
+ return "6SLL"; /* SLL version of the mx6 */
case MXC_CPU_MX6SX:
return "6SX"; /* SoloX version of the mx6 */
case MXC_CPU_MX6UL:
diff --git a/arch/arm/imx-common/iomux-v3.c b/arch/arm/imx-common/iomux-v3.c
index 392f4bc..c9a3bf2 100644
--- a/arch/arm/imx-common/iomux-v3.c
+++ b/arch/arm/imx-common/iomux-v3.c
@@ -31,7 +31,7 @@
(pad & MUX_PAD_CTRL_OFS_MASK) >> MUX_PAD_CTRL_OFS_SHIFT;
u32 pad_ctrl = (pad & MUX_PAD_CTRL_MASK) >> MUX_PAD_CTRL_SHIFT;
-#if defined CONFIG_MX6SL
+#if defined(CONFIG_MX6SL) || defined(CONFIG_MX6SLL)
/* Check whether LVE bit needs to be set */
if (pad_ctrl & PAD_CTL_LVE) {
pad_ctrl &= ~PAD_CTL_LVE;
@@ -51,7 +51,7 @@
sel_input_ofs += IOMUX_LPSR_SEL_INPUT_OFS;
}
#else
- if (is_mx6ull()) {
+ if (is_mx6ull() || is_mx6sll()) {
if (lpsr == IOMUX_CONFIG_LPSR) {
base = (void *)IOMUXC_SNVS_BASE_ADDR;
mux_mode &= ~IOMUX_CONFIG_LPSR;
@@ -60,7 +60,7 @@
#endif
#endif
- if (is_soc_type(MXC_SOC_MX7) || is_cpu_type(MXC_CPU_MX6ULL) || mux_ctrl_ofs)
+ if (is_mx7() || is_mx6ull() || is_mx6sll() || mux_ctrl_ofs)
__raw_writel(mux_mode, base + mux_ctrl_ofs);
if (sel_input_ofs)
@@ -73,6 +73,10 @@
#else
if (!(pad_ctrl & NO_PAD_CTRL) && pad_ctrl_ofs)
__raw_writel(pad_ctrl, base + pad_ctrl_ofs);
+#if defined(CONFIG_MX6SLL)
+ else if ((pad_ctrl & NO_PAD_CTRL) && pad_ctrl_ofs)
+ clrbits_le32(base + pad_ctrl_ofs, PAD_CTL_IPD_BIT);
+#endif
#endif
#ifdef CONFIG_IOMUX_LPSR
diff --git a/arch/arm/imx-common/spl.c b/arch/arm/imx-common/spl.c
index 325ba26..bdcda7d 100644
--- a/arch/arm/imx-common/spl.c
+++ b/arch/arm/imx-common/spl.c
@@ -14,9 +14,6 @@
#include <spl.h>
#if defined(CONFIG_MX6)
-#define MX6_MMC_PORT_MASK GENMASK(12, 11)
-#define MX6_MMC_PORT_2 BIT(11)
-
/* determine boot device from SRC_SBMR1 (BOOT_CFG[4:1]) or SRC_GPR9 register */
u32 spl_boot_device(void)
{
@@ -58,11 +55,10 @@
/* SD/eSD: 8.5.3, Table 8-15 */
case 0x4:
case 0x5:
+ return BOOT_DEVICE_MMC1;
/* MMC/eMMC: 8.5.3 */
case 0x6:
case 0x7:
- if ((reg & MX6_MMC_PORT_MASK) == MX6_MMC_PORT_2)
- return BOOT_DEVICE_MMC2;
return BOOT_DEVICE_MMC1;
/* NAND Flash: 8.5.2 */
case 0x8 ... 0xf:
diff --git a/arch/arm/imx-common/timer.c b/arch/arm/imx-common/timer.c
index 1f7c671..ee6eff2 100644
--- a/arch/arm/imx-common/timer.c
+++ b/arch/arm/imx-common/timer.c
@@ -45,7 +45,7 @@
#if defined(CONFIG_MX6)
if (((is_mx6dq()) && (soc_rev() > CHIP_REV_1_0)) ||
is_mx6dqp() || is_mx6sdl() || is_mx6sx() || is_mx6ul() ||
- is_mx6ull())
+ is_mx6ull() || is_mx6sll())
return 1;
return 0;
@@ -84,8 +84,12 @@
if (gpt_has_clk_source_osc()) {
i |= GPTCR_CLKSOURCE_OSC | GPTCR_TEN;
- /* For DL/S, SX, UL, ULL set 24Mhz OSC Enable bit and prescaler */
- if (is_mx6sdl() || is_mx6sx() || is_mx6ul() || is_mx6ull()) {
+ /*
+ * For DL/S, SX, UL, ULL, SLL set 24Mhz OSC
+ * Enable bit and prescaler
+ */
+ if (is_mx6sdl() || is_mx6sx() || is_mx6ul() || is_mx6ull() ||
+ is_mx6sll()) {
i |= GPTCR_24MEN;
/* Produce 3Mhz clock */
diff --git a/arch/arm/include/asm/arch-imx/cpu.h b/arch/arm/include/asm/arch-imx/cpu.h
index 667115b0..8bd1421 100644
--- a/arch/arm/include/asm/arch-imx/cpu.h
+++ b/arch/arm/include/asm/arch-imx/cpu.h
@@ -19,7 +19,8 @@
#define MXC_CPU_MX6UL 0x64
#define MXC_CPU_MX6ULL 0x65
#define MXC_CPU_MX6SOLO 0x66 /* dummy */
-#define MXC_CPU_MX6D 0x67
+#define MXC_CPU_MX6SLL 0x67
+#define MXC_CPU_MX6D 0x6A
#define MXC_CPU_MX6DP 0x68
#define MXC_CPU_MX6QP 0x69
#define MXC_CPU_MX7S 0x71 /* dummy ID */
diff --git a/arch/arm/include/asm/arch-mx6/clock.h b/arch/arm/include/asm/arch-mx6/clock.h
index ed1433e..2d9c45e 100644
--- a/arch/arm/include/asm/arch-mx6/clock.h
+++ b/arch/arm/include/asm/arch-mx6/clock.h
@@ -74,7 +74,7 @@
void enable_ipu_clock(void);
int enable_fec_anatop_clock(int fec_id, enum enet_freq freq);
void enable_enet_clk(unsigned char enable);
-int enable_lcdif_clock(u32 base_addr);
+int enable_lcdif_clock(u32 base_addr, bool enable);
void enable_qspi_clk(int qspi_num);
void enable_thermal_clk(void);
void mxs_set_lcdclk(u32 base_addr, u32 freq);
diff --git a/arch/arm/include/asm/arch-mx6/crm_regs.h b/arch/arm/include/asm/arch-mx6/crm_regs.h
index 29674ce..74ed912 100644
--- a/arch/arm/include/asm/arch-mx6/crm_regs.h
+++ b/arch/arm/include/asm/arch-mx6/crm_regs.h
@@ -307,6 +307,9 @@
/* LCFIF2_PODF on i.MX6SX */
#define MXC_CCM_CSCMR1_LCDIF2_PODF_MASK (0x7 << 20)
#define MXC_CCM_CSCMR1_LCDIF2_PODF_OFFSET 20
+/* LCDIF_PIX_PODF on i.MX6SL */
+#define MXC_CCM_CSCMR1_LCDIF_PIX_PODF_MASK (0x7 << 20)
+#define MXC_CCM_CSCMR1_LCDIF_PIX_PODF_OFFSET 20
/* ACLK_EMI on i.MX6DQ/SDL/DQP */
#define MXC_CCM_CSCMR1_ACLK_EMI_PODF_MASK (0x7 << 20)
#define MXC_CCM_CSCMR1_ACLK_EMI_PODF_OFFSET 20
@@ -529,6 +532,12 @@
#define MXC_CCM_CSCDR2_LCDIF2_CLK_SEL_MASK (0x7 << 0)
#define MXC_CCM_CSCDR2_LCDIF2_CLK_SEL_OFFSET 0
+/*LCD on i.MX6SL */
+#define MXC_CCM_CSCDR2_LCDIF_PIX_CLK_SEL_MASK (0x7 << 6)
+#define MXC_CCM_CSCDR2_LCDIF_PIX_CLK_SEL_OFFSET 6
+#define MXC_CCM_CSCDR2_LCDIF_PIX_PRE_DIV_MASK (0x7 << 3)
+#define MXC_CCM_CSCDR2_LCDIF_PIX_PRE_DIV_OFFSET 3
+
/* All IPU2_DI1 are LCDIF1 on MX6SX */
#define MXC_CCM_CHSCCDR_IPU2_DI1_PRE_CLK_SEL_MASK (0x7 << 15)
#define MXC_CCM_CHSCCDR_IPU2_DI1_PRE_CLK_SEL_OFFSET 15
@@ -554,6 +563,12 @@
#define MXC_CCM_CSCDR3_IPU1_HSP_CLK_SEL_MASK (0x3 << 9)
#define MXC_CCM_CSCDR3_IPU1_HSP_CLK_SEL_OFFSET 9
+/* For i.MX6SL */
+#define MXC_CCM_CSCDR3_LCDIF_AXI_PODF_MASK (0x7 << 16)
+#define MXC_CCM_CSCDR3_LCDIF_AXI_PODF_OFFSET 16
+#define MXC_CCM_CSCDR3_LCDIF_AXI_CLK_SEL_MASK (0x3 << 14)
+#define MXC_CCM_CSCDR3_LCDIF_AXI_CLK_SEL_OFFSET 14
+
/* Define the bits in register CDHIPR */
#define MXC_CCM_CDHIPR_ARM_PODF_BUSY (1 << 16)
#define MXC_CCM_CDHIPR_PERIPH_CLK_SEL_BUSY (1 << 5)
@@ -783,6 +798,12 @@
#define MXC_CCM_CCGR3_QSPI_OFFSET 14
#define MXC_CCM_CCGR3_QSPI_MASK (3 << MXC_CCM_CCGR3_QSPI_OFFSET)
+/* i.MX6SL */
+#define MXC_CCM_CCGR3_LCDIF_AXI_OFFSET 6
+#define MXC_CCM_CCGR3_LCDIF_AXI_MASK (3 << MXC_CCM_CCGR3_LCDIF_AXI_OFFSET)
+#define MXC_CCM_CCGR3_LCDIF_PIX_OFFSET 8
+#define MXC_CCM_CCGR3_LCDIF_PIX_MASK (3 << MXC_CCM_CCGR3_LCDIF_PIX_OFFSET)
+
#define MXC_CCM_CCGR3_IPU1_IPU_OFFSET 0
#define MXC_CCM_CCGR3_IPU1_IPU_MASK (3 << MXC_CCM_CCGR3_IPU1_IPU_OFFSET)
#define MXC_CCM_CCGR3_IPU1_IPU_DI0_OFFSET 2
diff --git a/arch/arm/include/asm/arch-mx6/imx-regs.h b/arch/arm/include/asm/arch-mx6/imx-regs.h
index 8bb36eb..6727c56 100644
--- a/arch/arm/include/asm/arch-mx6/imx-regs.h
+++ b/arch/arm/include/asm/arch-mx6/imx-regs.h
@@ -26,7 +26,7 @@
#define APBH_DMA_ARB_END_ADDR 0x0180BFFF
#define M4_BOOTROM_BASE_ADDR 0x007F8000
-#else
+#elif !defined(CONFIG_MX6SLL)
#define CAAM_ARB_BASE_ADDR 0x00100000
#define CAAM_ARB_END_ADDR 0x00103FFF
#define APBH_DMA_ARB_BASE_ADDR 0x00110000
@@ -46,13 +46,9 @@
#define MXS_BCH_BASE (APBH_DMA_ARB_BASE_ADDR + 0x04000)
/* GPV - PL301 configuration ports */
-#if (defined(CONFIG_MX6SL) || defined(CONFIG_MX6SX) || defined(CONFIG_MX6UL))
+#if (defined(CONFIG_MX6SX) || defined(CONFIG_MX6UL) || \
+ defined(CONFIG_MX6SL) || defined(CONFIG_MX6SLL))
#define GPV2_BASE_ADDR 0x00D00000
-#else
-#define GPV2_BASE_ADDR 0x00200000
-#endif
-
-#if (defined(CONFIG_MX6SX) || defined(CONFIG_MX6UL))
#define GPV3_BASE_ADDR 0x00E00000
#define GPV4_BASE_ADDR 0x00F00000
#define GPV5_BASE_ADDR 0x01000000
@@ -61,6 +57,7 @@
#define PCIE_ARB_END_ADDR 0x08FFFFFF
#else
+#define GPV2_BASE_ADDR 0x00200000
#define GPV3_BASE_ADDR 0x00300000
#define GPV4_BASE_ADDR 0x00800000
#define PCIE_ARB_BASE_ADDR 0x01000000
@@ -96,7 +93,7 @@
#define WEIM_ARB_END_ADDR 0x57FFFFFF
#define QSPI0_AMBA_BASE 0x60000000
#define QSPI0_AMBA_END 0x6FFFFFFF
-#else
+#elif !defined(CONFIG_MX6SLL)
#define SATA_ARB_BASE_ADDR 0x02200000
#define SATA_ARB_END_ADDR 0x02203FFF
#define OPENVG_ARB_BASE_ADDR 0x02204000
@@ -111,7 +108,8 @@
#define WEIM_ARB_END_ADDR 0x0FFFFFFF
#endif
-#if (defined(CONFIG_MX6SL) || defined(CONFIG_MX6SX) || defined(CONFIG_MX6UL))
+#if (defined(CONFIG_MX6SLL) || defined(CONFIG_MX6SL) || \
+ defined(CONFIG_MX6SX) || defined(CONFIG_MX6UL))
#define MMDC0_ARB_BASE_ADDR 0x80000000
#define MMDC0_ARB_END_ADDR 0xFFFFFFFF
#define MMDC1_ARB_BASE_ADDR 0xC0000000
@@ -141,19 +139,21 @@
#define ECSPI2_BASE_ADDR (ATZ1_BASE_ADDR + 0x0C000)
#define ECSPI3_BASE_ADDR (ATZ1_BASE_ADDR + 0x10000)
#define ECSPI4_BASE_ADDR (ATZ1_BASE_ADDR + 0x14000)
-#ifdef CONFIG_MX6SL
-#define UART5_IPS_BASE_ADDR (ATZ1_BASE_ADDR + 0x18000)
-#define UART1_IPS_BASE_ADDR (ATZ1_BASE_ADDR + 0x20000)
-#define UART2_IPS_BASE_ADDR (ATZ1_BASE_ADDR + 0x24000)
-#define SSI1_IPS_BASE_ADDR (ATZ1_BASE_ADDR + 0x28000)
-#define SSI2_IPS_BASE_ADDR (ATZ1_BASE_ADDR + 0x2C000)
-#define SSI3_IPS_BASE_ADDR (ATZ1_BASE_ADDR + 0x30000)
-#define UART3_IPS_BASE_ADDR (ATZ1_BASE_ADDR + 0x34000)
-#define UART4_IPS_BASE_ADDR (ATZ1_BASE_ADDR + 0x38000)
-#else
+
+#define MX6SL_UART5_BASE_ADDR (ATZ1_BASE_ADDR + 0x18000)
+#define MX6SLL_UART4_BASE_ADDR (ATZ1_BASE_ADDR + 0x18000)
+#define MX6UL_UART7_BASE_ADDR (ATZ1_BASE_ADDR + 0x18000)
+#define MX6SL_UART2_BASE_ADDR (ATZ1_BASE_ADDR + 0x24000)
+#define MX6SLL_UART2_BASE_ADDR (ATZ1_BASE_ADDR + 0x24000)
+#define MX6UL_UART8_BASE_ADDR (ATZ1_BASE_ADDR + 0x24000)
+#define MX6SL_UART3_BASE_ADDR (ATZ1_BASE_ADDR + 0x34000)
+#define MX6SLL_UART3_BASE_ADDR (ATZ1_BASE_ADDR + 0x34000)
+#define MX6SL_UART4_BASE_ADDR (ATZ1_BASE_ADDR + 0x38000)
+
#ifndef CONFIG_MX6SX
#define ECSPI5_BASE_ADDR (ATZ1_BASE_ADDR + 0x18000)
#endif
+#define UART1_IPS_BASE_ADDR (ATZ1_BASE_ADDR + 0x20000)
#define UART1_BASE (ATZ1_BASE_ADDR + 0x20000)
#define ESAI1_BASE_ADDR (ATZ1_BASE_ADDR + 0x24000)
#define UART8_BASE (ATZ1_BASE_ADDR + 0x24000)
@@ -161,7 +161,6 @@
#define SSI2_BASE_ADDR (ATZ1_BASE_ADDR + 0x2C000)
#define SSI3_BASE_ADDR (ATZ1_BASE_ADDR + 0x30000)
#define ASRC_BASE_ADDR (ATZ1_BASE_ADDR + 0x34000)
-#endif
#ifndef CONFIG_MX6SX
#define SPBA_BASE_ADDR (ATZ1_BASE_ADDR + 0x3C000)
@@ -176,6 +175,8 @@
#define PWM4_BASE_ADDR (AIPS1_OFF_BASE_ADDR + 0xC000)
#define CAN1_BASE_ADDR (AIPS1_OFF_BASE_ADDR + 0x10000)
#define CAN2_BASE_ADDR (AIPS1_OFF_BASE_ADDR + 0x14000)
+/* QOSC on i.MX6SLL */
+#define QOSC_BASE_ADDR (AIPS1_OFF_BASE_ADDR + 0x14000)
#define GPT1_BASE_ADDR (AIPS1_OFF_BASE_ADDR + 0x18000)
#define GPIO1_BASE_ADDR (AIPS1_OFF_BASE_ADDR + 0x1C000)
#define GPIO2_BASE_ADDR (AIPS1_OFF_BASE_ADDR + 0x20000)
@@ -198,11 +199,18 @@
#define SRC_BASE_ADDR (AIPS1_OFF_BASE_ADDR + 0x58000)
#define GPC_BASE_ADDR (AIPS1_OFF_BASE_ADDR + 0x5C000)
#define IOMUXC_BASE_ADDR (AIPS1_OFF_BASE_ADDR + 0x60000)
-#ifdef CONFIG_MX6SL
+#define IOMUXC_GPR_BASE_ADDR (AIPS1_OFF_BASE_ADDR + 0x64000)
+#ifdef CONFIG_MX6SLL
+#define CSI_BASE_ADDR (AIPS1_OFF_BASE_ADDR + 0x68000)
+#define SDMA_PORT_HOST_BASE_ADDR (AIPS1_OFF_BASE_ADDR + 0x6C000)
+#define PXP_BASE_ADDR (AIPS1_OFF_BASE_ADDR + 0x70000)
+#define EPDC_BASE_ADDR (AIPS1_OFF_BASE_ADDR + 0x74000)
+#define DCP_BASE_ADDR (AIPS1_OFF_BASE_ADDR + 0x7C000)
+#elif defined(CONFIG_MX6SL)
#define CSI_BASE_ADDR (AIPS1_OFF_BASE_ADDR + 0x64000)
#define SIPIX_BASE_ADDR (AIPS1_OFF_BASE_ADDR + 0x68000)
#define SDMA_PORT_HOST_BASE_ADDR (AIPS1_OFF_BASE_ADDR + 0x6C000)
-#elif CONFIG_MX6SX
+#elif defined(CONFIG_MX6SX)
#define CANFD1_BASE_ADDR (AIPS1_OFF_BASE_ADDR + 0x68000)
#define SDMA_BASE_ADDR (AIPS1_OFF_BASE_ADDR + 0x6C000)
#define CANFD2_BASE_ADDR (AIPS1_OFF_BASE_ADDR + 0x70000)
@@ -215,6 +223,9 @@
#define DMA_REQ_PORT_HOST_BASE_ADDR (AIPS1_OFF_BASE_ADDR + 0x6C000)
#endif
+#define MX6SL_LCDIF_BASE_ADDR (AIPS1_OFF_BASE_ADDR + 0x78000)
+#define MX6SLL_LCDIF_BASE_ADDR (AIPS1_OFF_BASE_ADDR + 0x78000)
+
#define AIPS2_ON_BASE_ADDR (ATZ2_BASE_ADDR + 0x7C000)
#define AIPS2_OFF_BASE_ADDR (ATZ2_BASE_ADDR + 0x80000)
#define AIPS3_ON_BASE_ADDR (ATZ3_BASE_ADDR + 0x7C000)
@@ -249,7 +260,7 @@
#define I2C3_BASE_ADDR (AIPS2_OFF_BASE_ADDR + 0x28000)
#define ROMCP_BASE_ADDR (AIPS2_OFF_BASE_ADDR + 0x2C000)
#define MMDC_P0_BASE_ADDR (AIPS2_OFF_BASE_ADDR + 0x30000)
-/* i.MX6SL */
+/* i.MX6SL/SLL */
#define RNGB_IPS_BASE_ADDR (AIPS2_OFF_BASE_ADDR + 0x34000)
#ifdef CONFIG_MX6UL
#define ENET2_BASE_ADDR (AIPS1_OFF_BASE_ADDR + 0x34000)
@@ -263,6 +274,10 @@
#define WEIM_BASE_ADDR (AIPS2_OFF_BASE_ADDR + 0x38000)
#define OCOTP_BASE_ADDR (AIPS2_OFF_BASE_ADDR + 0x3C000)
#define CSU_BASE_ADDR (AIPS2_OFF_BASE_ADDR + 0x40000)
+#ifdef CONFIG_MX6SLL
+#define IOMUXC_GPR_SNVS_BASE_ADDR (AIPS2_OFF_BASE_ADDR + 0x44000)
+#define IOMUXC_SNVS_BASE_ADDR (AIPS2_OFF_BASE_ADDR + 0x48000)
+#endif
#define IP2APB_PERFMON1_BASE_ADDR (AIPS2_OFF_BASE_ADDR + 0x44000)
#define IP2APB_PERFMON2_BASE_ADDR (AIPS2_OFF_BASE_ADDR + 0x48000)
#define MX6UL_LCDIF1_BASE_ADDR (AIPS2_OFF_BASE_ADDR + 0x48000)
@@ -296,6 +311,8 @@
#define I2C4_BASE_ADDR (AIPS2_OFF_BASE_ADDR + 0x78000)
#define IP2APB_USBPHY1_BASE_ADDR (AIPS2_OFF_BASE_ADDR + 0x78000)
#define IP2APB_USBPHY2_BASE_ADDR (AIPS2_OFF_BASE_ADDR + 0x7C000)
+/* i.MX6SLL */
+#define MTR_MASTER_BASE_ADDR (AIPS2_OFF_BASE_ADDR + 0x7C000)
#ifdef CONFIG_MX6SX
#define GIS_BASE_ADDR (AIPS3_ARB_BASE_ADDR + 0x04000)
@@ -334,7 +351,8 @@
#define MX6SX_LCDIF1_BASE_ADDR (AIPS3_ARB_BASE_ADDR + 0x20000)
#define MX6SX_WDOG3_BASE_ADDR (AIPS3_ARB_BASE_ADDR + 0x88000)
-#if !(defined(CONFIG_MX6SX) || defined(CONFIG_MX6UL))
+#if !(defined(CONFIG_MX6SX) || defined(CONFIG_MX6UL) || \
+ defined(CONFIG_MX6SLL) || defined(CONFIG_MX6SL))
#define IRAM_SIZE 0x00040000
#else
#define IRAM_SIZE 0x00020000
@@ -348,10 +366,14 @@
/* only for i.MX6SX/UL */
#define WDOG3_BASE_ADDR ((is_mx6ul() ? \
MX6UL_WDOG3_BASE_ADDR : MX6SX_WDOG3_BASE_ADDR))
-#define LCDIF1_BASE_ADDR ((is_mx6ul()) ? \
+#define LCDIF1_BASE_ADDR ((is_cpu_type(MXC_CPU_MX6SLL)) ? \
+ MX6SLL_LCDIF_BASE_ADDR : \
+ (is_cpu_type(MXC_CPU_MX6SL)) ? \
+ MX6SL_LCDIF_BASE_ADDR : \
+ ((is_cpu_type(MXC_CPU_MX6UL)) ? \
MX6UL_LCDIF1_BASE_ADDR : \
((is_mx6ull()) ? \
- MX6ULL_LCDIF1_BASE_ADDR : MX6SX_LCDIF1_BASE_ADDR))
+ MX6ULL_LCDIF1_BASE_ADDR : MX6SX_LCDIF1_BASE_ADDR)))
extern void imx_get_mac_from_fuse(int dev_id, unsigned char *mac);
@@ -672,7 +694,8 @@
#define MXC_CSPICON_POL 4 /* SCLK polarity */
#define MXC_CSPICON_SSPOL 12 /* SS polarity */
#define MXC_CSPICON_CTL 20 /* inactive state of SCLK */
-#if defined(CONFIG_MX6SL) || defined(CONFIG_MX6DL) || defined(CONFIG_MX6UL)
+#if defined(CONFIG_MX6SLL) || defined(CONFIG_MX6SL) || \
+ defined(CONFIG_MX6DL) || defined(CONFIG_MX6UL)
#define MXC_SPI_BASE_ADDRESSES \
ECSPI1_BASE_ADDR, \
ECSPI2_BASE_ADDR, \
diff --git a/arch/arm/include/asm/arch-mx6/mx6-pins.h b/arch/arm/include/asm/arch-mx6/mx6-pins.h
index b9cd670..2934b12 100644
--- a/arch/arm/include/asm/arch-mx6/mx6-pins.h
+++ b/arch/arm/include/asm/arch-mx6/mx6-pins.h
@@ -33,6 +33,8 @@
MX6_PAD_DECLARE(MX6_PAD_,name, pco, mc, mm, sio, si, pc),
#include "mx6dl_pins.h"
};
+#elif defined(CONFIG_MX6SLL)
+#include "mx6sll_pins.h"
#elif defined(CONFIG_MX6SL)
#include "mx6sl_pins.h"
#elif defined(CONFIG_MX6SX)
diff --git a/arch/arm/include/asm/arch-mx6/mx6sll_pins.h b/arch/arm/include/asm/arch-mx6/mx6sll_pins.h
new file mode 100644
index 0000000..1ecb7ce
--- /dev/null
+++ b/arch/arm/include/asm/arch-mx6/mx6sll_pins.h
@@ -0,0 +1,1019 @@
+/*
+ * Copyright (C) 2014 - 2016 Freescale Semiconductor, Inc.
+ *
+ * SPDX-License-Identifier: GPL-2.0+
+ */
+
+#ifndef __ASM_ARCH_IMX6SLL_PINS_H__
+#define __ASM_ARCH_IMX6SLL_PINS_H__
+
+#include <asm/imx-common/iomux-v3.h>
+
+enum {
+ MX6_PAD_WDOG_B__WDOG1_B = IOMUX_PAD(0x02DC, 0x0014, 0, 0x0000, 0, 0),
+ MX6_PAD_WDOG_B__WDOG1_RESET_B_DEB = IOMUX_PAD(0x02DC, 0x0014, 1, 0x0000, 0, 0),
+ MX6_PAD_WDOG_B__UART5_RI_B = IOMUX_PAD(0x02DC, 0x0014, 2, 0x0000, 0, 0),
+ MX6_PAD_WDOG_B__GPIO3_IO18 = IOMUX_PAD(0x02DC, 0x0014, 5, 0x0000, 0, 0),
+
+ MX6_PAD_REF_CLK_24M__XTALOSC_REF_CLK_24M = IOMUX_PAD(0x02E0, 0x0018, 0, 0x0000, 0, 0),
+ MX6_PAD_REF_CLK_24M__I2C3_SCL = IOMUX_PAD(0x02E0, 0x0018, IOMUX_CONFIG_SION | 1, 0x068C, 0, 0),
+ MX6_PAD_REF_CLK_24M__PWM3_OUT = IOMUX_PAD(0x02E0, 0x0018, 2, 0x0000, 0, 0),
+ MX6_PAD_REF_CLK_24M__USB_OTG2_ID = IOMUX_PAD(0x02E0, 0x0018, 3, 0x0560, 0, 0),
+ MX6_PAD_REF_CLK_24M__CCM_PMIC_READY = IOMUX_PAD(0x02E0, 0x0018, 4, 0x05AC, 0, 0),
+ MX6_PAD_REF_CLK_24M__GPIO3_IO21 = IOMUX_PAD(0x02E0, 0x0018, 5, 0x0000, 0, 0),
+ MX6_PAD_REF_CLK_24M__SD3_WP = IOMUX_PAD(0x02E0, 0x0018, 6, 0x0794, 0, 0),
+
+ MX6_PAD_REF_CLK_32K__XTALOSC_REF_CLK_32K = IOMUX_PAD(0x02E4, 0x001C, 0, 0x0000, 0, 0),
+ MX6_PAD_REF_CLK_32K__I2C3_SDA = IOMUX_PAD(0x02E4, 0x001C, IOMUX_CONFIG_SION | 1, 0x0690, 0, 0),
+ MX6_PAD_REF_CLK_32K__PWM4_OUT = IOMUX_PAD(0x02E4, 0x001C, 2, 0x0000, 0, 0),
+ MX6_PAD_REF_CLK_32K__USB_OTG1_ID = IOMUX_PAD(0x02E4, 0x001C, 3, 0x055C, 0, 0),
+ MX6_PAD_REF_CLK_32K__SD1_LCTL = IOMUX_PAD(0x02E4, 0x001C, 4, 0x0000, 0, 0),
+ MX6_PAD_REF_CLK_32K__GPIO3_IO22 = IOMUX_PAD(0x02E4, 0x001C, 5, 0x0000, 0, 0),
+ MX6_PAD_REF_CLK_32K__SD3_CD_B = IOMUX_PAD(0x02E4, 0x001C, 6, 0x0780, 0, 0),
+
+ MX6_PAD_PWM1__PWM1_OUT = IOMUX_PAD(0x02E8, 0x0020, 0, 0x0000, 0, 0),
+ MX6_PAD_PWM1__CCM_CLKO = IOMUX_PAD(0x02E8, 0x0020, 1, 0x0000, 0, 0),
+ MX6_PAD_PWM1__AUDIO_CLK_OUT = IOMUX_PAD(0x02E8, 0x0020, 2, 0x0000, 0, 0),
+ MX6_PAD_PWM1__CSI_MCLK = IOMUX_PAD(0x02E8, 0x0020, 4, 0x0000, 0, 0),
+ MX6_PAD_PWM1__GPIO3_IO23 = IOMUX_PAD(0x02E8, 0x0020, 5, 0x0000, 0, 0),
+ MX6_PAD_PWM1__EPIT1_OUT = IOMUX_PAD(0x02E8, 0x0020, 6, 0x0000, 0, 0),
+
+ MX6_PAD_KEY_COL0__KEY_COL0 = IOMUX_PAD(0x02EC, 0x0024, 0, 0x06A0, 0, 0),
+ MX6_PAD_KEY_COL0__I2C2_SCL = IOMUX_PAD(0x02EC, 0x0024, IOMUX_CONFIG_SION | 1, 0x0684, 0, 0),
+ MX6_PAD_KEY_COL0__LCD_DATA00 = IOMUX_PAD(0x02EC, 0x0024, 2, 0x06D8, 0, 0),
+ MX6_PAD_KEY_COL0__SD1_CD_B = IOMUX_PAD(0x02EC, 0x0024, 4, 0x0770, 1, 0),
+ MX6_PAD_KEY_COL0__GPIO3_IO24 = IOMUX_PAD(0x02EC, 0x0024, 5, 0x0000, 0, 0),
+
+ MX6_PAD_KEY_ROW0__KEY_ROW0 = IOMUX_PAD(0x02F0, 0x0028, 0, 0x06C0, 0, 0),
+ MX6_PAD_KEY_ROW0__I2C2_SDA = IOMUX_PAD(0x02F0, 0x0028, IOMUX_CONFIG_SION | 1, 0x0688, 0, 0),
+ MX6_PAD_KEY_ROW0__LCD_DATA01 = IOMUX_PAD(0x02F0, 0x0028, 2, 0x06DC, 0, 0),
+ MX6_PAD_KEY_ROW0__SD1_WP = IOMUX_PAD(0x02F0, 0x0028, 4, 0x0774, 1, 0),
+ MX6_PAD_KEY_ROW0__GPIO3_IO25 = IOMUX_PAD(0x02F0, 0x0028, 5, 0x0000, 0, 0),
+
+ MX6_PAD_KEY_COL1__KEY_COL1 = IOMUX_PAD(0x02F4, 0x002C, 0, 0x06A4, 0, 0),
+ MX6_PAD_KEY_COL1__ECSPI4_MOSI = IOMUX_PAD(0x02F4, 0x002C, 1, 0x0658, 1, 0),
+ MX6_PAD_KEY_COL1__LCD_DATA02 = IOMUX_PAD(0x02F4, 0x002C, 2, 0x06E0, 0, 0),
+ MX6_PAD_KEY_COL1__SD3_DATA4 = IOMUX_PAD(0x02F4, 0x002C, 4, 0x0784, 0, 0),
+ MX6_PAD_KEY_COL1__GPIO3_IO26 = IOMUX_PAD(0x02F4, 0x002C, 5, 0x0000, 0, 0),
+
+ MX6_PAD_KEY_ROW1__KEY_ROW1 = IOMUX_PAD(0x02F8, 0x0030, 0, 0x06C4, 0, 0),
+ MX6_PAD_KEY_ROW1__ECSPI4_MISO = IOMUX_PAD(0x02F8, 0x0030, 1, 0x0654, 1, 0),
+ MX6_PAD_KEY_ROW1__LCD_DATA03 = IOMUX_PAD(0x02F8, 0x0030, 2, 0x06E4, 0, 0),
+ MX6_PAD_KEY_ROW1__CSI_FIELD = IOMUX_PAD(0x02F8, 0x0030, 3, 0x0000, 0, 0),
+ MX6_PAD_KEY_ROW1__SD3_DATA5 = IOMUX_PAD(0x02F8, 0x0030, 4, 0x0788, 0, 0),
+ MX6_PAD_KEY_ROW1__GPIO3_IO27 = IOMUX_PAD(0x02F8, 0x0030, 5, 0x0000, 0, 0),
+
+ MX6_PAD_KEY_COL2__KEY_COL2 = IOMUX_PAD(0x02FC, 0x0034, 0, 0x06A8, 0, 0),
+ MX6_PAD_KEY_COL2__ECSPI4_SS0 = IOMUX_PAD(0x02FC, 0x0034, 1, 0x065C, 1, 0),
+ MX6_PAD_KEY_COL2__LCD_DATA04 = IOMUX_PAD(0x02FC, 0x0034, 2, 0x06E8, 0, 0),
+ MX6_PAD_KEY_COL2__CSI_DATA12 = IOMUX_PAD(0x02FC, 0x0034, 3, 0x05B8, 1, 0),
+ MX6_PAD_KEY_COL2__SD3_DATA6 = IOMUX_PAD(0x02FC, 0x0034, 4, 0x078C, 0, 0),
+ MX6_PAD_KEY_COL2__GPIO3_IO28 = IOMUX_PAD(0x02FC, 0x0034, 5, 0x0000, 0, 0),
+
+ MX6_PAD_KEY_ROW2__KEY_ROW2 = IOMUX_PAD(0x0300, 0x0038, 0, 0x06C8, 0, 0),
+ MX6_PAD_KEY_ROW2__ECSPI4_SCLK = IOMUX_PAD(0x0300, 0x0038, 1, 0x0650, 1, 0),
+ MX6_PAD_KEY_ROW2__LCD_DATA05 = IOMUX_PAD(0x0300, 0x0038, 2, 0x06EC, 0, 0),
+ MX6_PAD_KEY_ROW2__CSI_DATA13 = IOMUX_PAD(0x0300, 0x0038, 3, 0x05BC, 1, 0),
+ MX6_PAD_KEY_ROW2__SD3_DATA7 = IOMUX_PAD(0x0300, 0x0038, 4, 0x0790, 0, 0),
+ MX6_PAD_KEY_ROW2__GPIO3_IO29 = IOMUX_PAD(0x0300, 0x0038, 5, 0x0000, 0, 0),
+
+ MX6_PAD_KEY_COL3__KEY_COL3 = IOMUX_PAD(0x0304, 0x003C, 0, 0x06AC, 0, 0),
+ MX6_PAD_KEY_COL3__AUD6_RXFS = IOMUX_PAD(0x0304, 0x003C, 1, 0x05A0, 1, 0),
+ MX6_PAD_KEY_COL3__LCD_DATA06 = IOMUX_PAD(0x0304, 0x003C, 2, 0x06F0, 0, 0),
+ MX6_PAD_KEY_COL3__CSI_DATA14 = IOMUX_PAD(0x0304, 0x003C, 3, 0x05C0, 1, 0),
+ MX6_PAD_KEY_COL3__GPIO3_IO30 = IOMUX_PAD(0x0304, 0x003C, 5, 0x0000, 0, 0),
+ MX6_PAD_KEY_COL3__SD1_RESET = IOMUX_PAD(0x0304, 0x003C, 6, 0x0000, 0, 0),
+
+ MX6_PAD_KEY_ROW3__KEY_ROW3 = IOMUX_PAD(0x0308, 0x0040, 0, 0x06CC, 1, 0),
+ MX6_PAD_KEY_ROW3__AUD6_RXC = IOMUX_PAD(0x0308, 0x0040, 1, 0x059C, 1, 0),
+ MX6_PAD_KEY_ROW3__LCD_DATA07 = IOMUX_PAD(0x0308, 0x0040, 2, 0x06F4, 1, 0),
+ MX6_PAD_KEY_ROW3__CSI_DATA15 = IOMUX_PAD(0x0308, 0x0040, 3, 0x05C4, 2, 0),
+ MX6_PAD_KEY_ROW3__GPIO3_IO31 = IOMUX_PAD(0x0308, 0x0040, 5, 0x0000, 0, 0),
+ MX6_PAD_KEY_ROW3__SD1_VSELECT = IOMUX_PAD(0x0308, 0x0040, 6, 0x0000, 0, 0),
+
+ MX6_PAD_KEY_COL4__KEY_COL4 = IOMUX_PAD(0x030C, 0x0044, 0, 0x06B0, 1, 0),
+ MX6_PAD_KEY_COL4__AUD6_RXD = IOMUX_PAD(0x030C, 0x0044, 1, 0x0594, 1, 0),
+ MX6_PAD_KEY_COL4__LCD_DATA08 = IOMUX_PAD(0x030C, 0x0044, 2, 0x06F8, 1, 0),
+ MX6_PAD_KEY_COL4__CSI_DATA16 = IOMUX_PAD(0x030C, 0x0044, 3, 0x0000, 0, 0),
+ MX6_PAD_KEY_COL4__GPIO4_IO00 = IOMUX_PAD(0x030C, 0x0044, 5, 0x0000, 0, 0),
+ MX6_PAD_KEY_COL4__USB_OTG1_PWR = IOMUX_PAD(0x030C, 0x0044, 6, 0x0000, 0, 0),
+
+ MX6_PAD_KEY_ROW4__KEY_ROW4 = IOMUX_PAD(0x0310, 0x0048, 0, 0x06D0, 1, 0),
+ MX6_PAD_KEY_ROW4__AUD6_TXC = IOMUX_PAD(0x0310, 0x0048, 1, 0x05A4, 1, 0),
+ MX6_PAD_KEY_ROW4__LCD_DATA09 = IOMUX_PAD(0x0310, 0x0048, 2, 0x06FC, 1, 0),
+ MX6_PAD_KEY_ROW4__CSI_DATA17 = IOMUX_PAD(0x0310, 0x0048, 3, 0x0000, 0, 0),
+ MX6_PAD_KEY_ROW4__GPIO4_IO01 = IOMUX_PAD(0x0310, 0x0048, 5, 0x0000, 0, 0),
+ MX6_PAD_KEY_ROW4__USB_OTG1_OC = IOMUX_PAD(0x0310, 0x0048, 6, 0x076C, 2, 0),
+
+ MX6_PAD_KEY_COL5__KEY_COL5 = IOMUX_PAD(0x0314, 0x004C, 0, 0x0694, 1, 0),
+ MX6_PAD_KEY_COL5__AUD6_TXFS = IOMUX_PAD(0x0314, 0x004C, 1, 0x05A8, 1, 0),
+ MX6_PAD_KEY_COL5__LCD_DATA10 = IOMUX_PAD(0x0314, 0x004C, 2, 0x0700, 0, 0),
+ MX6_PAD_KEY_COL5__CSI_DATA18 = IOMUX_PAD(0x0314, 0x004C, 3, 0x0000, 0, 0),
+ MX6_PAD_KEY_COL5__GPIO4_IO02 = IOMUX_PAD(0x0314, 0x004C, 5, 0x0000, 0, 0),
+ MX6_PAD_KEY_COL5__USB_OTG2_PWR = IOMUX_PAD(0x0314, 0x004C, 6, 0x0000, 0, 0),
+
+ MX6_PAD_KEY_ROW5__KEY_ROW5 = IOMUX_PAD(0x0318, 0x0050, 0, 0x06B4, 2, 0),
+ MX6_PAD_KEY_ROW5__AUD6_TXD = IOMUX_PAD(0x0318, 0x0050, 1, 0x0598, 1, 0),
+ MX6_PAD_KEY_ROW5__LCD_DATA11 = IOMUX_PAD(0x0318, 0x0050, 2, 0x0704, 1, 0),
+ MX6_PAD_KEY_ROW5__CSI_DATA19 = IOMUX_PAD(0x0318, 0x0050, 3, 0x0000, 0, 0),
+ MX6_PAD_KEY_ROW5__GPIO4_IO03 = IOMUX_PAD(0x0318, 0x0050, 5, 0x0000, 0, 0),
+ MX6_PAD_KEY_ROW5__USB_OTG2_OC = IOMUX_PAD(0x0318, 0x0050, 6, 0x0768, 3, 0),
+
+ MX6_PAD_KEY_COL6__KEY_COL6 = IOMUX_PAD(0x031C, 0x0054, 0, 0x0698, 2, 0),
+ MX6_PAD_KEY_COL6__UART4_DCE_RX = IOMUX_PAD(0x031C, 0x0054, 1, 0x075C, 2, 0),
+ MX6_PAD_KEY_COL6__UART4_DTE_TX = IOMUX_PAD(0x031C, 0x0054, 1, 0x0000, 0, 0),
+ MX6_PAD_KEY_COL6__LCD_DATA12 = IOMUX_PAD(0x031C, 0x0054, 2, 0x0708, 1, 0),
+ MX6_PAD_KEY_COL6__CSI_DATA20 = IOMUX_PAD(0x031C, 0x0054, 3, 0x0000, 0, 0),
+ MX6_PAD_KEY_COL6__GPIO4_IO04 = IOMUX_PAD(0x031C, 0x0054, 5, 0x0000, 0, 0),
+ MX6_PAD_KEY_COL6__SD3_RESET = IOMUX_PAD(0x031C, 0x0054, 6, 0x0000, 0, 0),
+
+ MX6_PAD_KEY_ROW6__KEY_ROW6 = IOMUX_PAD(0x0320, 0x0058, 0, 0x06B8, 2, 0),
+ MX6_PAD_KEY_ROW6__UART4_DCE_TX = IOMUX_PAD(0x0320, 0x0058, 1, 0x0000, 0, 0),
+ MX6_PAD_KEY_ROW6__UART4_DTE_RX = IOMUX_PAD(0x0320, 0x0058, 1, 0x075C, 3, 0),
+ MX6_PAD_KEY_ROW6__LCD_DATA13 = IOMUX_PAD(0x0320, 0x0058, 2, 0x070C, 1, 0),
+ MX6_PAD_KEY_ROW6__CSI_DATA21 = IOMUX_PAD(0x0320, 0x0058, 3, 0x0000, 0, 0),
+ MX6_PAD_KEY_ROW6__GPIO4_IO05 = IOMUX_PAD(0x0320, 0x0058, 5, 0x0000, 0, 0),
+ MX6_PAD_KEY_ROW6__SD3_VSELECT = IOMUX_PAD(0x0320, 0x0058, 6, 0x0000, 0, 0),
+
+ MX6_PAD_KEY_COL7__KEY_COL7 = IOMUX_PAD(0x0324, 0x005C, 0, 0x069C, 2, 0),
+ MX6_PAD_KEY_COL7__UART4_DCE_RTS = IOMUX_PAD(0x0324, 0x005C, 1, 0x0758, 2, 0),
+ MX6_PAD_KEY_COL7__UART4_DTE_CTS = IOMUX_PAD(0x0324, 0x005C, 1, 0x0000, 0, 0),
+ MX6_PAD_KEY_COL7__LCD_DATA14 = IOMUX_PAD(0x0324, 0x005C, 2, 0x0710, 1, 0),
+ MX6_PAD_KEY_COL7__CSI_DATA22 = IOMUX_PAD(0x0324, 0x005C, 3, 0x0000, 0, 0),
+ MX6_PAD_KEY_COL7__GPIO4_IO06 = IOMUX_PAD(0x0324, 0x005C, 5, 0x0000, 0, 0),
+ MX6_PAD_KEY_COL7__SD1_WP = IOMUX_PAD(0x0324, 0x005C, 6, 0x0774, 3, 0),
+
+ MX6_PAD_KEY_ROW7__KEY_ROW7 = IOMUX_PAD(0x0328, 0x0060, 0, 0x06BC, 2, 0),
+ MX6_PAD_KEY_ROW7__UART4_DCE_CTS = IOMUX_PAD(0x0328, 0x0060, 1, 0x0000, 0, 0),
+ MX6_PAD_KEY_ROW7__UART4_DTE_RTS = IOMUX_PAD(0x0328, 0x0060, 1, 0x0758, 3, 0),
+ MX6_PAD_KEY_ROW7__LCD_DATA15 = IOMUX_PAD(0x0328, 0x0060, 2, 0x0714, 1, 0),
+ MX6_PAD_KEY_ROW7__CSI_DATA23 = IOMUX_PAD(0x0328, 0x0060, 3, 0x0000, 0, 0),
+ MX6_PAD_KEY_ROW7__GPIO4_IO07 = IOMUX_PAD(0x0328, 0x0060, 5, 0x0000, 0, 0),
+ MX6_PAD_KEY_ROW7__SD1_CD_B = IOMUX_PAD(0x0328, 0x0060, 6, 0x0770, 3, 0),
+
+ MX6_PAD_EPDC_DATA00__EPDC_DATA00 = IOMUX_PAD(0x032C, 0x0064, 0, 0x0000, 0, 0),
+ MX6_PAD_EPDC_DATA00__ECSPI4_MOSI = IOMUX_PAD(0x032C, 0x0064, 1, 0x0658, 2, 0),
+ MX6_PAD_EPDC_DATA00__LCD_DATA24 = IOMUX_PAD(0x032C, 0x0064, 2, 0x0000, 0, 0),
+ MX6_PAD_EPDC_DATA00__CSI_DATA00 = IOMUX_PAD(0x032C, 0x0064, 3, 0x05C8, 2, 0),
+ MX6_PAD_EPDC_DATA00__GPIO1_IO07 = IOMUX_PAD(0x032C, 0x0064, 5, 0x0000, 0, 0),
+
+ MX6_PAD_EPDC_DATA01__EPDC_DATA01 = IOMUX_PAD(0x0330, 0x0068, 0, 0x0000, 0, 0),
+ MX6_PAD_EPDC_DATA01__ECSPI4_MISO = IOMUX_PAD(0x0330, 0x0068, 1, 0x0654, 2, 0),
+ MX6_PAD_EPDC_DATA01__LCD_DATA25 = IOMUX_PAD(0x0330, 0x0068, 2, 0x0000, 0, 0),
+ MX6_PAD_EPDC_DATA01__CSI_DATA01 = IOMUX_PAD(0x0330, 0x0068, 3, 0x05CC, 2, 0),
+ MX6_PAD_EPDC_DATA01__GPIO1_IO08 = IOMUX_PAD(0x0330, 0x0068, 5, 0x0000, 0, 0),
+
+ MX6_PAD_EPDC_DATA02__EPDC_DATA02 = IOMUX_PAD(0x0334, 0x006C, 0, 0x0000, 0, 0),
+ MX6_PAD_EPDC_DATA02__ECSPI4_SS0 = IOMUX_PAD(0x0334, 0x006C, 1, 0x065C, 2, 0),
+ MX6_PAD_EPDC_DATA02__LCD_DATA26 = IOMUX_PAD(0x0334, 0x006C, 2, 0x0000, 0, 0),
+ MX6_PAD_EPDC_DATA02__CSI_DATA02 = IOMUX_PAD(0x0334, 0x006C, 3, 0x05D0, 2, 0),
+ MX6_PAD_EPDC_DATA02__GPIO1_IO09 = IOMUX_PAD(0x0334, 0x006C, 5, 0x0000, 0, 0),
+
+ MX6_PAD_EPDC_DATA03__EPDC_DATA03 = IOMUX_PAD(0x0338, 0x0070, 0, 0x0000, 0, 0),
+ MX6_PAD_EPDC_DATA03__ECSPI4_SCLK = IOMUX_PAD(0x0338, 0x0070, 1, 0x0650, 2, 0),
+ MX6_PAD_EPDC_DATA03__LCD_DATA27 = IOMUX_PAD(0x0338, 0x0070, 2, 0x0000, 0, 0),
+ MX6_PAD_EPDC_DATA03__CSI_DATA03 = IOMUX_PAD(0x0338, 0x0070, 3, 0x05D4, 2, 0),
+ MX6_PAD_EPDC_DATA03__GPIO1_IO10 = IOMUX_PAD(0x0338, 0x0070, 5, 0x0000, 0, 0),
+
+ MX6_PAD_EPDC_DATA04__EPDC_DATA04 = IOMUX_PAD(0x033C, 0x0074, 0, 0x0000, 0, 0),
+ MX6_PAD_EPDC_DATA04__ECSPI4_SS1 = IOMUX_PAD(0x033C, 0x0074, 1, 0x0660, 1, 0),
+ MX6_PAD_EPDC_DATA04__LCD_DATA28 = IOMUX_PAD(0x033C, 0x0074, 2, 0x0000, 0, 0),
+ MX6_PAD_EPDC_DATA04__CSI_DATA04 = IOMUX_PAD(0x033C, 0x0074, 3, 0x05D8, 2, 0),
+ MX6_PAD_EPDC_DATA04__GPIO1_IO11 = IOMUX_PAD(0x033C, 0x0074, 5, 0x0000, 0, 0),
+
+ MX6_PAD_EPDC_DATA05__EPDC_DATA05 = IOMUX_PAD(0x0340, 0x0078, 0, 0x0000, 0, 0),
+ MX6_PAD_EPDC_DATA05__ECSPI4_SS2 = IOMUX_PAD(0x0340, 0x0078, 1, 0x0664, 1, 0),
+ MX6_PAD_EPDC_DATA05__LCD_DATA29 = IOMUX_PAD(0x0340, 0x0078, 2, 0x0000, 0, 0),
+ MX6_PAD_EPDC_DATA05__CSI_DATA05 = IOMUX_PAD(0x0340, 0x0078, 3, 0x05DC, 2, 0),
+ MX6_PAD_EPDC_DATA05__GPIO1_IO12 = IOMUX_PAD(0x0340, 0x0078, 5, 0x0000, 0, 0),
+
+ MX6_PAD_EPDC_DATA06__EPDC_DATA06 = IOMUX_PAD(0x0344, 0x007C, 0, 0x0000, 0, 0),
+ MX6_PAD_EPDC_DATA06__ECSPI4_SS3 = IOMUX_PAD(0x0344, 0x007C, 1, 0x0000, 0, 0),
+ MX6_PAD_EPDC_DATA06__LCD_DATA30 = IOMUX_PAD(0x0344, 0x007C, 2, 0x0000, 0, 0),
+ MX6_PAD_EPDC_DATA06__CSI_DATA06 = IOMUX_PAD(0x0344, 0x007C, 3, 0x05E0, 2, 0),
+ MX6_PAD_EPDC_DATA06__GPIO1_IO13 = IOMUX_PAD(0x0344, 0x007C, 5, 0x0000, 0, 0),
+
+ MX6_PAD_EPDC_DATA07__EPDC_DATA07 = IOMUX_PAD(0x0348, 0x0080, 0, 0x0000, 0, 0),
+ MX6_PAD_EPDC_DATA07__ECSPI4_RDY = IOMUX_PAD(0x0348, 0x0080, 1, 0x0000, 0, 0),
+ MX6_PAD_EPDC_DATA07__LCD_DATA31 = IOMUX_PAD(0x0348, 0x0080, 2, 0x0000, 0, 0),
+ MX6_PAD_EPDC_DATA07__CSI_DATA07 = IOMUX_PAD(0x0348, 0x0080, 3, 0x05E4, 2, 0),
+ MX6_PAD_EPDC_DATA07__GPIO1_IO14 = IOMUX_PAD(0x0348, 0x0080, 5, 0x0000, 0, 0),
+
+ MX6_PAD_EPDC_DATA08__EPDC_DATA08 = IOMUX_PAD(0x034C, 0x0084, 0, 0x0000, 0, 0),
+ MX6_PAD_EPDC_DATA08__ECSPI3_MOSI = IOMUX_PAD(0x034C, 0x0084, 1, 0x063C, 2, 0),
+ MX6_PAD_EPDC_DATA08__EPDC_PWR_CTRL0 = IOMUX_PAD(0x034C, 0x0084, 2, 0x0000, 0, 0),
+ MX6_PAD_EPDC_DATA08__GPIO1_IO15 = IOMUX_PAD(0x034C, 0x0084, 5, 0x0000, 0, 0),
+
+ MX6_PAD_EPDC_DATA09__EPDC_DATA09 = IOMUX_PAD(0x0350, 0x0088, 0, 0x0000, 0, 0),
+ MX6_PAD_EPDC_DATA09__ECSPI3_MISO = IOMUX_PAD(0x0350, 0x0088, 1, 0x0638, 2, 0),
+ MX6_PAD_EPDC_DATA09__EPDC_PWR_CTRL1 = IOMUX_PAD(0x0350, 0x0088, 2, 0x0000, 0, 0),
+ MX6_PAD_EPDC_DATA09__GPIO1_IO16 = IOMUX_PAD(0x0350, 0x0088, 5, 0x0000, 0, 0),
+
+ MX6_PAD_EPDC_DATA10__EPDC_DATA10 = IOMUX_PAD(0x0354, 0x008C, 0, 0x0000, 0, 0),
+ MX6_PAD_EPDC_DATA10__ECSPI3_SS0 = IOMUX_PAD(0x0354, 0x008C, 1, 0x0648, 2, 0),
+ MX6_PAD_EPDC_DATA10__EPDC_PWR_CTRL2 = IOMUX_PAD(0x0354, 0x008C, 2, 0x0000, 0, 0),
+ MX6_PAD_EPDC_DATA10__GPIO1_IO17 = IOMUX_PAD(0x0354, 0x008C, 5, 0x0000, 0, 0),
+
+ MX6_PAD_EPDC_DATA11__EPDC_DATA11 = IOMUX_PAD(0x0358, 0x0090, 0, 0x0000, 0, 0),
+ MX6_PAD_EPDC_DATA11__ECSPI3_SCLK = IOMUX_PAD(0x0358, 0x0090, 1, 0x0630, 2, 0),
+ MX6_PAD_EPDC_DATA11__EPDC_PWR_CTRL3 = IOMUX_PAD(0x0358, 0x0090, 2, 0x0000, 0, 0),
+ MX6_PAD_EPDC_DATA11__GPIO1_IO18 = IOMUX_PAD(0x0358, 0x0090, 5, 0x0000, 0, 0),
+
+ MX6_PAD_EPDC_DATA12__EPDC_DATA12 = IOMUX_PAD(0x035C, 0x0094, 0, 0x0000, 0, 0),
+ MX6_PAD_EPDC_DATA12__UART2_DCE_RX = IOMUX_PAD(0x035C, 0x0094, 1, 0x074C, 4, 0),
+ MX6_PAD_EPDC_DATA12__UART2_DTE_TX = IOMUX_PAD(0x035C, 0x0094, 1, 0x0000, 0, 0),
+ MX6_PAD_EPDC_DATA12__EPDC_PWR_COM = IOMUX_PAD(0x035C, 0x0094, 2, 0x0000, 0, 0),
+ MX6_PAD_EPDC_DATA12__GPIO1_IO19 = IOMUX_PAD(0x035C, 0x0094, 5, 0x0000, 0, 0),
+ MX6_PAD_EPDC_DATA12__ECSPI3_SS1 = IOMUX_PAD(0x035C, 0x0094, 6, 0x064C, 1, 0),
+
+ MX6_PAD_EPDC_DATA13__EPDC_DATA13 = IOMUX_PAD(0x0360, 0x0098, 0, 0x0000, 0, 0),
+ MX6_PAD_EPDC_DATA13__UART2_DCE_TX = IOMUX_PAD(0x0360, 0x0098, 1, 0x0000, 0, 0),
+ MX6_PAD_EPDC_DATA13__UART2_DTE_RX = IOMUX_PAD(0x0360, 0x0098, 1, 0x074C, 5, 0),
+ MX6_PAD_EPDC_DATA13__EPDC_PWR_IRQ = IOMUX_PAD(0x0360, 0x0098, 2, 0x0668, 0, 0),
+ MX6_PAD_EPDC_DATA13__GPIO1_IO20 = IOMUX_PAD(0x0360, 0x0098, 5, 0x0000, 0, 0),
+ MX6_PAD_EPDC_DATA13__ECSPI3_SS2 = IOMUX_PAD(0x0360, 0x0098, 6, 0x0640, 1, 0),
+
+ MX6_PAD_EPDC_DATA14__EPDC_DATA14 = IOMUX_PAD(0x0364, 0x009C, 0, 0x0000, 0, 0),
+ MX6_PAD_EPDC_DATA14__UART2_DCE_RTS = IOMUX_PAD(0x0364, 0x009C, 1, 0x0748, 4, 0),
+ MX6_PAD_EPDC_DATA14__UART2_DTE_CTS = IOMUX_PAD(0x0364, 0x009C, 1, 0x0000, 0, 0),
+ MX6_PAD_EPDC_DATA14__EPDC_PWR_STAT = IOMUX_PAD(0x0364, 0x009C, 2, 0x066C, 0, 0),
+ MX6_PAD_EPDC_DATA14__GPIO1_IO21 = IOMUX_PAD(0x0364, 0x009C, 5, 0x0000, 0, 0),
+ MX6_PAD_EPDC_DATA14__ECSPI3_SS3 = IOMUX_PAD(0x0364, 0x009C, 6, 0x0644, 1, 0),
+
+ MX6_PAD_EPDC_DATA15__EPDC_DATA15 = IOMUX_PAD(0x0368, 0x00A0, 0, 0x0000, 0, 0),
+ MX6_PAD_EPDC_DATA15__UART2_DCE_CTS = IOMUX_PAD(0x0368, 0x00A0, 1, 0x0000, 0, 0),
+ MX6_PAD_EPDC_DATA15__UART2_DTE_RTS = IOMUX_PAD(0x0368, 0x00A0, 1, 0x0748, 5, 0),
+ MX6_PAD_EPDC_DATA15__EPDC_PWR_WAKE = IOMUX_PAD(0x0368, 0x00A0, 2, 0x0000, 0, 0),
+ MX6_PAD_EPDC_DATA15__GPIO1_IO22 = IOMUX_PAD(0x0368, 0x00A0, 5, 0x0000, 0, 0),
+ MX6_PAD_EPDC_DATA15__ECSPI3_RDY = IOMUX_PAD(0x0368, 0x00A0, 6, 0x0634, 1, 0),
+
+ MX6_PAD_EPDC_SDCLK__EPDC_SDCLK_P = IOMUX_PAD(0x036C, 0x00A4, 0, 0x0000, 0, 0),
+ MX6_PAD_EPDC_SDCLK__ECSPI2_MOSI = IOMUX_PAD(0x036C, 0x00A4, 1, 0x0624, 2, 0),
+ MX6_PAD_EPDC_SDCLK__I2C2_SCL = IOMUX_PAD(0x036C, 0x00A4, IOMUX_CONFIG_SION | 2, 0x0684, 2, 0),
+ MX6_PAD_EPDC_SDCLK__CSI_DATA08 = IOMUX_PAD(0x036C, 0x00A4, 3, 0x05E8, 2, 0),
+ MX6_PAD_EPDC_SDCLK__GPIO1_IO23 = IOMUX_PAD(0x036C, 0x00A4, 5, 0x0000, 0, 0),
+
+ MX6_PAD_EPDC_SDLE__EPDC_SDLE = IOMUX_PAD(0x0370, 0x00A8, 0, 0x0000, 0, 0),
+ MX6_PAD_EPDC_SDLE__ECSPI2_MISO = IOMUX_PAD(0x0370, 0x00A8, 1, 0x0620, 2, 0),
+ MX6_PAD_EPDC_SDLE__I2C2_SDA = IOMUX_PAD(0x0370, 0x00A8, IOMUX_CONFIG_SION | 2, 0x0688, 2, 0),
+ MX6_PAD_EPDC_SDLE__CSI_DATA09 = IOMUX_PAD(0x0370, 0x00A8, 3, 0x05EC, 2, 0),
+ MX6_PAD_EPDC_SDLE__GPIO1_IO24 = IOMUX_PAD(0x0370, 0x00A8, 5, 0x0000, 0, 0),
+
+ MX6_PAD_EPDC_SDOE__EPDC_SDOE = IOMUX_PAD(0x0374, 0x00AC, 0, 0x0000, 0, 0),
+ MX6_PAD_EPDC_SDOE__ECSPI2_SS0 = IOMUX_PAD(0x0374, 0x00AC, 1, 0x0628, 1, 0),
+ MX6_PAD_EPDC_SDOE__CSI_DATA10 = IOMUX_PAD(0x0374, 0x00AC, 3, 0x05B0, 2, 0),
+ MX6_PAD_EPDC_SDOE__GPIO1_IO25 = IOMUX_PAD(0x0374, 0x00AC, 5, 0x0000, 0, 0),
+
+ MX6_PAD_EPDC_SDSHR__EPDC_SDSHR = IOMUX_PAD(0x0378, 0x00B0, 0, 0x0000, 0, 0),
+ MX6_PAD_EPDC_SDSHR__ECSPI2_SCLK = IOMUX_PAD(0x0378, 0x00B0, 1, 0x061C, 2, 0),
+ MX6_PAD_EPDC_SDSHR__EPDC_SDCE4 = IOMUX_PAD(0x0378, 0x00B0, 2, 0x0000, 0, 0),
+ MX6_PAD_EPDC_SDSHR__CSI_DATA11 = IOMUX_PAD(0x0378, 0x00B0, 3, 0x05B4, 2, 0),
+ MX6_PAD_EPDC_SDSHR__GPIO1_IO26 = IOMUX_PAD(0x0378, 0x00B0, 5, 0x0000, 0, 0),
+
+ MX6_PAD_EPDC_SDCE0__EPDC_SDCE0 = IOMUX_PAD(0x037C, 0x00B4, 0, 0x0000, 0, 0),
+ MX6_PAD_EPDC_SDCE0__ECSPI2_SS1 = IOMUX_PAD(0x037C, 0x00B4, 1, 0x062C, 1, 0),
+ MX6_PAD_EPDC_SDCE0__PWM3_OUT = IOMUX_PAD(0x037C, 0x00B4, 2, 0x0000, 0, 0),
+ MX6_PAD_EPDC_SDCE0__GPIO1_IO27 = IOMUX_PAD(0x037C, 0x00B4, 5, 0x0000, 0, 0),
+
+ MX6_PAD_EPDC_SDCE1__EPDC_SDCE1 = IOMUX_PAD(0x0380, 0x00B8, 0, 0x0000, 0, 0),
+ MX6_PAD_EPDC_SDCE1__WDOG2_B = IOMUX_PAD(0x0380, 0x00B8, 1, 0x0000, 0, 0),
+ MX6_PAD_EPDC_SDCE1__PWM4_OUT = IOMUX_PAD(0x0380, 0x00B8, 2, 0x0000, 0, 0),
+ MX6_PAD_EPDC_SDCE1__GPIO1_IO28 = IOMUX_PAD(0x0380, 0x00B8, 5, 0x0000, 0, 0),
+
+ MX6_PAD_EPDC_SDCE2__EPDC_SDCE2 = IOMUX_PAD(0x0384, 0x00BC, 0, 0x0000, 0, 0),
+ MX6_PAD_EPDC_SDCE2__I2C3_SCL = IOMUX_PAD(0x0384, 0x00BC, IOMUX_CONFIG_SION | 1, 0x068C, 2, 0),
+ MX6_PAD_EPDC_SDCE2__PWM1_OUT = IOMUX_PAD(0x0384, 0x00BC, 2, 0x0000, 0, 0),
+ MX6_PAD_EPDC_SDCE2__GPIO1_IO29 = IOMUX_PAD(0x0384, 0x00BC, 5, 0x0000, 0, 0),
+
+ MX6_PAD_EPDC_SDCE3__EPDC_SDCE3 = IOMUX_PAD(0x0388, 0x00C0, 0, 0x0000, 0, 0),
+ MX6_PAD_EPDC_SDCE3__I2C3_SDA = IOMUX_PAD(0x0388, 0x00C0, IOMUX_CONFIG_SION | 1, 0x0690, 2, 0),
+ MX6_PAD_EPDC_SDCE3__PWM2_OUT = IOMUX_PAD(0x0388, 0x00C0, 2, 0x0000, 0, 0),
+ MX6_PAD_EPDC_SDCE3__GPIO1_IO30 = IOMUX_PAD(0x0388, 0x00C0, 5, 0x0000, 0, 0),
+
+ MX6_PAD_EPDC_GDCLK__EPDC_GDCLK = IOMUX_PAD(0x038C, 0x00C4, 0, 0x0000, 0, 0),
+ MX6_PAD_EPDC_GDCLK__ECSPI2_SS2 = IOMUX_PAD(0x038C, 0x00C4, 1, 0x0000, 0, 0),
+ MX6_PAD_EPDC_GDCLK__CSI_PIXCLK = IOMUX_PAD(0x038C, 0x00C4, 3, 0x05F4, 2, 0),
+ MX6_PAD_EPDC_GDCLK__GPIO1_IO31 = IOMUX_PAD(0x038C, 0x00C4, 5, 0x0000, 0, 0),
+ MX6_PAD_EPDC_GDCLK__SD2_RESET = IOMUX_PAD(0x038C, 0x00C4, 6, 0x0000, 0, 0),
+
+ MX6_PAD_EPDC_GDOE__EPDC_GDOE = IOMUX_PAD(0x0390, 0x00C8, 0, 0x0000, 0, 0),
+ MX6_PAD_EPDC_GDOE__ECSPI2_SS3 = IOMUX_PAD(0x0390, 0x00C8, 1, 0x0000, 0, 0),
+ MX6_PAD_EPDC_GDOE__CSI_HSYNC = IOMUX_PAD(0x0390, 0x00C8, 3, 0x05F0, 2, 0),
+ MX6_PAD_EPDC_GDOE__GPIO2_IO00 = IOMUX_PAD(0x0390, 0x00C8, 5, 0x0000, 0, 0),
+ MX6_PAD_EPDC_GDOE__SD2_VSELECT = IOMUX_PAD(0x0390, 0x00C8, 6, 0x0000, 0, 0),
+
+ MX6_PAD_EPDC_GDRL__EPDC_GDRL = IOMUX_PAD(0x0394, 0x00CC, 0, 0x0000, 0, 0),
+ MX6_PAD_EPDC_GDRL__ECSPI2_RDY = IOMUX_PAD(0x0394, 0x00CC, 1, 0x0000, 0, 0),
+ MX6_PAD_EPDC_GDRL__CSI_MCLK = IOMUX_PAD(0x0394, 0x00CC, 3, 0x0000, 0, 0),
+ MX6_PAD_EPDC_GDRL__GPIO2_IO01 = IOMUX_PAD(0x0394, 0x00CC, 5, 0x0000, 0, 0),
+ MX6_PAD_EPDC_GDRL__SD2_WP = IOMUX_PAD(0x0394, 0x00CC, 6, 0x077C, 2, 0),
+
+ MX6_PAD_EPDC_GDSP__EPDC_GDSP = IOMUX_PAD(0x0398, 0x00D0, 0, 0x0000, 0, 0),
+ MX6_PAD_EPDC_GDSP__PWM4_OUT = IOMUX_PAD(0x0398, 0x00D0, 1, 0x0000, 0, 0),
+ MX6_PAD_EPDC_GDSP__CSI_VSYNC = IOMUX_PAD(0x0398, 0x00D0, 3, 0x05F8, 2, 0),
+ MX6_PAD_EPDC_GDSP__GPIO2_IO02 = IOMUX_PAD(0x0398, 0x00D0, 5, 0x0000, 0, 0),
+ MX6_PAD_EPDC_GDSP__SD2_CD_B = IOMUX_PAD(0x0398, 0x00D0, 6, 0x0778, 2, 0),
+
+ MX6_PAD_EPDC_VCOM0__EPDC_VCOM0 = IOMUX_PAD(0x039C, 0x00D4, 0, 0x0000, 0, 0),
+ MX6_PAD_EPDC_VCOM0__AUD5_RXFS = IOMUX_PAD(0x039C, 0x00D4, 1, 0x0588, 1, 0),
+ MX6_PAD_EPDC_VCOM0__UART3_DCE_RX = IOMUX_PAD(0x039C, 0x00D4, 2, 0x0754, 4, 0),
+ MX6_PAD_EPDC_VCOM0__UART3_DTE_TX = IOMUX_PAD(0x039C, 0x00D4, 2, 0x0000, 0, 0),
+ MX6_PAD_EPDC_VCOM0__GPIO2_IO03 = IOMUX_PAD(0x039C, 0x00D4, 5, 0x0000, 0, 0),
+ MX6_PAD_EPDC_VCOM0__EPDC_SDCE5 = IOMUX_PAD(0x039C, 0x00D4, 6, 0x0000, 0, 0),
+
+ MX6_PAD_EPDC_VCOM1__EPDC_VCOM1 = IOMUX_PAD(0x03A0, 0x00D8, 0, 0x0000, 0, 0),
+ MX6_PAD_EPDC_VCOM1__AUD5_RXD = IOMUX_PAD(0x03A0, 0x00D8, 1, 0x057C, 1, 0),
+ MX6_PAD_EPDC_VCOM1__UART3_DCE_TX = IOMUX_PAD(0x03A0, 0x00D8, 2, 0x0000, 0, 0),
+ MX6_PAD_EPDC_VCOM1__UART3_DTE_RX = IOMUX_PAD(0x03A0, 0x00D8, 2, 0x0754, 5, 0),
+ MX6_PAD_EPDC_VCOM1__GPIO2_IO04 = IOMUX_PAD(0x03A0, 0x00D8, 5, 0x0000, 0, 0),
+ MX6_PAD_EPDC_VCOM1__EPDC_SDCE6 = IOMUX_PAD(0x03A0, 0x00D8, 6, 0x0000, 0, 0),
+
+ MX6_PAD_EPDC_BDR0__EPDC_BDR0 = IOMUX_PAD(0x03A4, 0x00DC, 0, 0x0000, 0, 0),
+ MX6_PAD_EPDC_BDR0__UART3_DCE_RTS = IOMUX_PAD(0x03A4, 0x00DC, 2, 0x0750, 2, 0),
+ MX6_PAD_EPDC_BDR0__UART3_DTE_CTS = IOMUX_PAD(0x03A4, 0x00DC, 2, 0x0000, 0, 0),
+ MX6_PAD_EPDC_BDR0__GPIO2_IO05 = IOMUX_PAD(0x03A4, 0x00DC, 5, 0x0000, 0, 0),
+ MX6_PAD_EPDC_BDR0__EPDC_SDCE7 = IOMUX_PAD(0x03A4, 0x00DC, 6, 0x0000, 0, 0),
+
+ MX6_PAD_EPDC_BDR1__EPDC_BDR1 = IOMUX_PAD(0x03A8, 0x00E0, 0, 0x0000, 0, 0),
+ MX6_PAD_EPDC_BDR1__UART3_DCE_CTS = IOMUX_PAD(0x03A8, 0x00E0, 2, 0x0000, 0, 0),
+ MX6_PAD_EPDC_BDR1__UART3_DTE_RTS = IOMUX_PAD(0x03A8, 0x00E0, 2, 0x0750, 3, 0),
+ MX6_PAD_EPDC_BDR1__GPIO2_IO06 = IOMUX_PAD(0x03A8, 0x00E0, 5, 0x0000, 0, 0),
+ MX6_PAD_EPDC_BDR1__EPDC_SDCE8 = IOMUX_PAD(0x03A8, 0x00E0, 6, 0x0000, 0, 0),
+
+ MX6_PAD_EPDC_PWR_CTRL0__EPDC_PWR_CTRL0 = IOMUX_PAD(0x03AC, 0x00E4, 0, 0x0000, 0, 0),
+ MX6_PAD_EPDC_PWR_CTRL0__AUD5_RXC = IOMUX_PAD(0x03AC, 0x00E4, 1, 0x0584, 1, 0),
+ MX6_PAD_EPDC_PWR_CTRL0__LCD_DATA16 = IOMUX_PAD(0x03AC, 0x00E4, 2, 0x0718, 1, 0),
+ MX6_PAD_EPDC_PWR_CTRL0__GPIO2_IO07 = IOMUX_PAD(0x03AC, 0x00E4, 5, 0x0000, 0, 0),
+
+ MX6_PAD_EPDC_PWR_CTRL1__EPDC_PWR_CTRL1 = IOMUX_PAD(0x03B0, 0x00E8, 0, 0x0000, 0, 0),
+ MX6_PAD_EPDC_PWR_CTRL1__AUD5_TXFS = IOMUX_PAD(0x03B0, 0x00E8, 1, 0x0590, 1, 0),
+ MX6_PAD_EPDC_PWR_CTRL1__LCD_DATA17 = IOMUX_PAD(0x03B0, 0x00E8, 2, 0x071C, 1, 0),
+ MX6_PAD_EPDC_PWR_CTRL1__GPIO2_IO08 = IOMUX_PAD(0x03B0, 0x00E8, 5, 0x0000, 0, 0),
+
+ MX6_PAD_EPDC_PWR_CTRL2__EPDC_PWR_CTRL2 = IOMUX_PAD(0x03B4, 0x00EC, 0, 0x0000, 0, 0),
+ MX6_PAD_EPDC_PWR_CTRL2__AUD5_TXD = IOMUX_PAD(0x03B4, 0x00EC, 1, 0x0580, 1, 0),
+ MX6_PAD_EPDC_PWR_CTRL2__LCD_DATA18 = IOMUX_PAD(0x03B4, 0x00EC, 2, 0x0720, 1, 0),
+ MX6_PAD_EPDC_PWR_CTRL2__GPIO2_IO09 = IOMUX_PAD(0x03B4, 0x00EC, 5, 0x0000, 0, 0),
+
+ MX6_PAD_EPDC_PWR_CTRL3__EPDC_PWR_CTRL3 = IOMUX_PAD(0x03B8, 0x00F0, 0, 0x0000, 0, 0),
+ MX6_PAD_EPDC_PWR_CTRL3__AUD5_TXC = IOMUX_PAD(0x03B8, 0x00F0, 1, 0x058C, 1, 0),
+ MX6_PAD_EPDC_PWR_CTRL3__LCD_DATA19 = IOMUX_PAD(0x03B8, 0x00F0, 2, 0x0724, 1, 0),
+ MX6_PAD_EPDC_PWR_CTRL3__GPIO2_IO10 = IOMUX_PAD(0x03B8, 0x00F0, 5, 0x0000, 0, 0),
+
+ MX6_PAD_EPDC_PWR_COM__EPDC_PWR_COM = IOMUX_PAD(0x03BC, 0x00F4, 0, 0x0000, 0, 0),
+ MX6_PAD_EPDC_PWR_COM__LCD_DATA20 = IOMUX_PAD(0x03BC, 0x00F4, 2, 0x0728, 1, 0),
+ MX6_PAD_EPDC_PWR_COM__USB_OTG1_ID = IOMUX_PAD(0x03BC, 0x00F4, 4, 0x055C, 4, 0),
+ MX6_PAD_EPDC_PWR_COM__GPIO2_IO11 = IOMUX_PAD(0x03BC, 0x00F4, 5, 0x0000, 0, 0),
+ MX6_PAD_EPDC_PWR_COM__SD3_RESET = IOMUX_PAD(0x03BC, 0x00F4, 6, 0x0000, 0, 0),
+
+ MX6_PAD_EPDC_PWR_IRQ__EPDC_PWR_IRQ = IOMUX_PAD(0x03C0, 0x00F8, 0, 0x0668, 1, 0),
+ MX6_PAD_EPDC_PWR_IRQ__LCD_DATA21 = IOMUX_PAD(0x03C0, 0x00F8, 2, 0x072C, 1, 0),
+ MX6_PAD_EPDC_PWR_IRQ__USB_OTG2_ID = IOMUX_PAD(0x03C0, 0x00F8, 4, 0x0560, 3, 0),
+ MX6_PAD_EPDC_PWR_IRQ__GPIO2_IO12 = IOMUX_PAD(0x03C0, 0x00F8, 5, 0x0000, 0, 0),
+ MX6_PAD_EPDC_PWR_IRQ__SD3_VSELECT = IOMUX_PAD(0x03C0, 0x00F8, 6, 0x0000, 0, 0),
+
+ MX6_PAD_EPDC_PWR_STAT__EPDC_PWR_STAT = IOMUX_PAD(0x03C4, 0x00FC, 0, 0x066C, 1, 0),
+ MX6_PAD_EPDC_PWR_STAT__LCD_DATA22 = IOMUX_PAD(0x03C4, 0x00FC, 2, 0x0730, 1, 0),
+ MX6_PAD_EPDC_PWR_STAT__ARM_EVENTI = IOMUX_PAD(0x03C4, 0x00FC, 4, 0x0000, 0, 0),
+ MX6_PAD_EPDC_PWR_STAT__GPIO2_IO13 = IOMUX_PAD(0x03C4, 0x00FC, 5, 0x0000, 0, 0),
+ MX6_PAD_EPDC_PWR_STAT__SD3_WP = IOMUX_PAD(0x03C4, 0x00FC, 6, 0x0794, 2, 0),
+
+ MX6_PAD_EPDC_PWR_WAKE__EPDC_PWR_WAKE = IOMUX_PAD(0x03C8, 0x0100, 0, 0x0000, 0, 0),
+ MX6_PAD_EPDC_PWR_WAKE__LCD_DATA23 = IOMUX_PAD(0x03C8, 0x0100, 2, 0x0734, 1, 0),
+ MX6_PAD_EPDC_PWR_WAKE__ARM_EVENTO = IOMUX_PAD(0x03C8, 0x0100, 4, 0x0000, 0, 0),
+ MX6_PAD_EPDC_PWR_WAKE__GPIO2_IO14 = IOMUX_PAD(0x03C8, 0x0100, 5, 0x0000, 0, 0),
+ MX6_PAD_EPDC_PWR_WAKE__SD3_CD_B = IOMUX_PAD(0x03C8, 0x0100, 6, 0x0780, 2, 0),
+
+ MX6_PAD_LCD_CLK__LCD_CLK = IOMUX_PAD(0x03CC, 0x0104, 0, 0x0000, 0, 0),
+ MX6_PAD_LCD_CLK__LCD_WR_RWN = IOMUX_PAD(0x03CC, 0x0104, 2, 0x0000, 0, 0),
+ MX6_PAD_LCD_CLK__PWM4_OUT = IOMUX_PAD(0x03CC, 0x0104, 4, 0x0000, 0, 0),
+ MX6_PAD_LCD_CLK__GPIO2_IO15 = IOMUX_PAD(0x03CC, 0x0104, 5, 0x0000, 0, 0),
+
+ MX6_PAD_LCD_ENABLE__LCD_ENABLE = IOMUX_PAD(0x03D0, 0x0108, 0, 0x0000, 0, 0),
+ MX6_PAD_LCD_ENABLE__LCD_RD_E = IOMUX_PAD(0x03D0, 0x0108, 2, 0x0000, 0, 0),
+ MX6_PAD_LCD_ENABLE__UART2_DCE_RX = IOMUX_PAD(0x03D0, 0x0108, 4, 0x0000, 0, 0),
+ MX6_PAD_LCD_ENABLE__UART2_DTE_TX = IOMUX_PAD(0x03D0, 0x0108, 4, 0x0000, 0, 0),
+ MX6_PAD_LCD_ENABLE__GPIO2_IO16 = IOMUX_PAD(0x03D0, 0x0108, 5, 0x0000, 0, 0),
+
+ MX6_PAD_LCD_HSYNC__LCD_HSYNC = IOMUX_PAD(0x03D4, 0x010C, 0, 0x06D4, 0, 0),
+ MX6_PAD_LCD_HSYNC__LCD_CS = IOMUX_PAD(0x03D4, 0x010C, 2, 0x0000, 0, 0),
+ MX6_PAD_LCD_HSYNC__UART2_DCE_TX = IOMUX_PAD(0x03D4, 0x010C, 4, 0x0000, 0, 0),
+ MX6_PAD_LCD_HSYNC__UART2_DTE_RX = IOMUX_PAD(0x03D4, 0x010C, 4, 0x074C, 1, 0),
+ MX6_PAD_LCD_HSYNC__GPIO2_IO17 = IOMUX_PAD(0x03D4, 0x010C, 5, 0x0000, 0, 0),
+ MX6_PAD_LCD_HSYNC__ARM_TRACE_CLK = IOMUX_PAD(0x03D4, 0x010C, 6, 0x0000, 0, 0),
+
+ MX6_PAD_LCD_VSYNC__LCD_VSYNC = IOMUX_PAD(0x03D8, 0x0110, 0, 0x0000, 0, 0),
+ MX6_PAD_LCD_VSYNC__LCD_RS = IOMUX_PAD(0x03D8, 0x0110, 2, 0x0000, 0, 0),
+ MX6_PAD_LCD_VSYNC__UART2_DCE_RTS = IOMUX_PAD(0x03D8, 0x0110, 4, 0x0748, 0, 0),
+ MX6_PAD_LCD_VSYNC__UART2_DTE_CTS = IOMUX_PAD(0x03D8, 0x0110, 4, 0x0000, 0, 0),
+ MX6_PAD_LCD_VSYNC__GPIO2_IO18 = IOMUX_PAD(0x03D8, 0x0110, 5, 0x0000, 0, 0),
+ MX6_PAD_LCD_VSYNC__ARM_TRACE_CTL = IOMUX_PAD(0x03D8, 0x0110, 6, 0x0000, 0, 0),
+
+ MX6_PAD_LCD_RESET__LCD_RESET = IOMUX_PAD(0x03DC, 0x0114, 0, 0x0000, 0, 0),
+ MX6_PAD_LCD_RESET__LCD_BUSY = IOMUX_PAD(0x03DC, 0x0114, 2, 0x06D4, 1, 0),
+ MX6_PAD_LCD_RESET__UART2_DCE_CTS = IOMUX_PAD(0x03DC, 0x0114, 4, 0x0000, 0, 0),
+ MX6_PAD_LCD_RESET__UART2_DTE_RTS = IOMUX_PAD(0x03DC, 0x0114, 4, 0x0748, 1, 0),
+ MX6_PAD_LCD_RESET__GPIO2_IO19 = IOMUX_PAD(0x03DC, 0x0114, 5, 0x0000, 0, 0),
+ MX6_PAD_LCD_RESET__CCM_PMIC_READY = IOMUX_PAD(0x03DC, 0x0114, 6, 0x05AC, 2, 0),
+
+ MX6_PAD_LCD_DATA00__LCD_DATA00 = IOMUX_PAD(0x03E0, 0x0118, 0, 0x06D8, 1, 0),
+ MX6_PAD_LCD_DATA00__ECSPI1_MOSI = IOMUX_PAD(0x03E0, 0x0118, 1, 0x0608, 0, 0),
+ MX6_PAD_LCD_DATA00__USB_OTG2_ID = IOMUX_PAD(0x03E0, 0x0118, 2, 0x0560, 2, 0),
+ MX6_PAD_LCD_DATA00__PWM1_OUT = IOMUX_PAD(0x03E0, 0x0118, 3, 0x0000, 0, 0),
+ MX6_PAD_LCD_DATA00__UART5_DTR_B = IOMUX_PAD(0x03E0, 0x0118, 4, 0x0000, 0, 0),
+ MX6_PAD_LCD_DATA00__GPIO2_IO20 = IOMUX_PAD(0x03E0, 0x0118, 5, 0x0000, 0, 0),
+ MX6_PAD_LCD_DATA00__ARM_TRACE00 = IOMUX_PAD(0x03E0, 0x0118, 6, 0x0000, 0, 0),
+ MX6_PAD_LCD_DATA00__SRC_BOOT_CFG00 = IOMUX_PAD(0x03E0, 0x0118, 7, 0x0000, 0, 0),
+
+ MX6_PAD_LCD_DATA01__LCD_DATA01 = IOMUX_PAD(0x03E4, 0x011C, 0, 0x06DC, 1, 0),
+ MX6_PAD_LCD_DATA01__ECSPI1_MISO = IOMUX_PAD(0x03E4, 0x011C, 1, 0x0604, 0, 0),
+ MX6_PAD_LCD_DATA01__USB_OTG1_ID = IOMUX_PAD(0x03E4, 0x011C, 2, 0x055C, 3, 0),
+ MX6_PAD_LCD_DATA01__PWM2_OUT = IOMUX_PAD(0x03E4, 0x011C, 3, 0x0000, 0, 0),
+ MX6_PAD_LCD_DATA01__AUD4_RXFS = IOMUX_PAD(0x03E4, 0x011C, 4, 0x0570, 0, 0),
+ MX6_PAD_LCD_DATA01__GPIO2_IO21 = IOMUX_PAD(0x03E4, 0x011C, 5, 0x0000, 0, 0),
+ MX6_PAD_LCD_DATA01__ARM_TRACE01 = IOMUX_PAD(0x03E4, 0x011C, 6, 0x0000, 0, 0),
+ MX6_PAD_LCD_DATA01__SRC_BOOT_CFG01 = IOMUX_PAD(0x03E4, 0x011C, 7, 0x0000, 0, 0),
+
+ MX6_PAD_LCD_DATA02__LCD_DATA02 = IOMUX_PAD(0x03E8, 0x0120, 0, 0x06E0, 1, 0),
+ MX6_PAD_LCD_DATA02__ECSPI1_SS0 = IOMUX_PAD(0x03E8, 0x0120, 1, 0x0614, 0, 0),
+ MX6_PAD_LCD_DATA02__EPIT2_OUT = IOMUX_PAD(0x03E8, 0x0120, 2, 0x0000, 0, 0),
+ MX6_PAD_LCD_DATA02__PWM3_OUT = IOMUX_PAD(0x03E8, 0x0120, 3, 0x0000, 0, 0),
+ MX6_PAD_LCD_DATA02__AUD4_RXC = IOMUX_PAD(0x03E8, 0x0120, 4, 0x056C, 0, 0),
+ MX6_PAD_LCD_DATA02__GPIO2_IO22 = IOMUX_PAD(0x03E8, 0x0120, 5, 0x0000, 0, 0),
+ MX6_PAD_LCD_DATA02__ARM_TRACE02 = IOMUX_PAD(0x03E8, 0x0120, 6, 0x0000, 0, 0),
+ MX6_PAD_LCD_DATA02__SRC_BOOT_CFG02 = IOMUX_PAD(0x03E8, 0x0120, 7, 0x0000, 0, 0),
+
+ MX6_PAD_LCD_DATA03__LCD_DATA03 = IOMUX_PAD(0x03EC, 0x0124, 0, 0x06E4, 1, 0),
+ MX6_PAD_LCD_DATA03__ECSPI1_SCLK = IOMUX_PAD(0x03EC, 0x0124, 1, 0x05FC, 0, 0),
+ MX6_PAD_LCD_DATA03__UART5_DSR_B = IOMUX_PAD(0x03EC, 0x0124, 2, 0x0000, 0, 0),
+ MX6_PAD_LCD_DATA03__PWM4_OUT = IOMUX_PAD(0x03EC, 0x0124, 3, 0x0000, 0, 0),
+ MX6_PAD_LCD_DATA03__AUD4_RXD = IOMUX_PAD(0x03EC, 0x0124, 4, 0x0564, 0, 0),
+ MX6_PAD_LCD_DATA03__GPIO2_IO23 = IOMUX_PAD(0x03EC, 0x0124, 5, 0x0000, 0, 0),
+ MX6_PAD_LCD_DATA03__ARM_TRACE03 = IOMUX_PAD(0x03EC, 0x0124, 6, 0x0000, 0, 0),
+ MX6_PAD_LCD_DATA03__SRC_BOOT_CFG03 = IOMUX_PAD(0x03EC, 0x0124, 7, 0x0000, 0, 0),
+
+ MX6_PAD_LCD_DATA04__LCD_DATA04 = IOMUX_PAD(0x03F0, 0x0128, 0, 0x06E8, 1, 0),
+ MX6_PAD_LCD_DATA04__ECSPI1_SS1 = IOMUX_PAD(0x03F0, 0x0128, 1, 0x060C, 1, 0),
+ MX6_PAD_LCD_DATA04__CSI_VSYNC = IOMUX_PAD(0x03F0, 0x0128, 2, 0x05F8, 0, 0),
+ MX6_PAD_LCD_DATA04__WDOG2_RESET_B_DEB = IOMUX_PAD(0x03F0, 0x0128, 3, 0x0000, 0, 0),
+ MX6_PAD_LCD_DATA04__AUD4_TXC = IOMUX_PAD(0x03F0, 0x0128, 4, 0x0574, 0, 0),
+ MX6_PAD_LCD_DATA04__GPIO2_IO24 = IOMUX_PAD(0x03F0, 0x0128, 5, 0x0000, 0, 0),
+ MX6_PAD_LCD_DATA04__ARM_TRACE04 = IOMUX_PAD(0x03F0, 0x0128, 6, 0x0000, 0, 0),
+ MX6_PAD_LCD_DATA04__SRC_BOOT_CFG04 = IOMUX_PAD(0x03F0, 0x0128, 7, 0x0000, 0, 0),
+
+ MX6_PAD_LCD_DATA05__LCD_DATA05 = IOMUX_PAD(0x03F4, 0x012C, 0, 0x06EC, 1, 0),
+ MX6_PAD_LCD_DATA05__ECSPI1_SS2 = IOMUX_PAD(0x03F4, 0x012C, 1, 0x0610, 1, 0),
+ MX6_PAD_LCD_DATA05__CSI_HSYNC = IOMUX_PAD(0x03F4, 0x012C, 2, 0x05F0, 0, 0),
+ MX6_PAD_LCD_DATA05__AUD4_TXFS = IOMUX_PAD(0x03F4, 0x012C, 4, 0x0578, 0, 0),
+ MX6_PAD_LCD_DATA05__GPIO2_IO25 = IOMUX_PAD(0x03F4, 0x012C, 5, 0x0000, 0, 0),
+ MX6_PAD_LCD_DATA05__ARM_TRACE05 = IOMUX_PAD(0x03F4, 0x012C, 6, 0x0000, 0, 0),
+ MX6_PAD_LCD_DATA05__SRC_BOOT_CFG05 = IOMUX_PAD(0x03F4, 0x012C, 7, 0x0000, 0, 0),
+
+ MX6_PAD_LCD_DATA06__LCD_DATA06 = IOMUX_PAD(0x03F8, 0x0130, 0, 0x06F0, 1, 0),
+ MX6_PAD_LCD_DATA06__ECSPI1_SS3 = IOMUX_PAD(0x03F8, 0x0130, 1, 0x0618, 0, 0),
+ MX6_PAD_LCD_DATA06__CSI_PIXCLK = IOMUX_PAD(0x03F8, 0x0130, 2, 0x05F4, 0, 0),
+ MX6_PAD_LCD_DATA06__AUD4_TXD = IOMUX_PAD(0x03F8, 0x0130, 4, 0x0568, 0, 0),
+ MX6_PAD_LCD_DATA06__GPIO2_IO26 = IOMUX_PAD(0x03F8, 0x0130, 5, 0x0000, 0, 0),
+ MX6_PAD_LCD_DATA06__ARM_TRACE06 = IOMUX_PAD(0x03F8, 0x0130, 6, 0x0000, 0, 0),
+ MX6_PAD_LCD_DATA06__SRC_BOOT_CFG06 = IOMUX_PAD(0x03F8, 0x0130, 7, 0x0000, 0, 0),
+
+ MX6_PAD_LCD_DATA07__LCD_DATA07 = IOMUX_PAD(0x03FC, 0x0134, 0, 0x06F4, 0, 0),
+ MX6_PAD_LCD_DATA07__ECSPI1_RDY = IOMUX_PAD(0x03FC, 0x0134, 1, 0x0600, 0, 0),
+ MX6_PAD_LCD_DATA07__CSI_MCLK = IOMUX_PAD(0x03FC, 0x0134, 2, 0x0000, 0, 0),
+ MX6_PAD_LCD_DATA07__AUDIO_CLK_OUT = IOMUX_PAD(0x03FC, 0x0134, 4, 0x0000, 0, 0),
+ MX6_PAD_LCD_DATA07__GPIO2_IO27 = IOMUX_PAD(0x03FC, 0x0134, 5, 0x0000, 0, 0),
+ MX6_PAD_LCD_DATA07__ARM_TRACE07 = IOMUX_PAD(0x03FC, 0x0134, 6, 0x0000, 0, 0),
+ MX6_PAD_LCD_DATA07__SRC_BOOT_CFG07 = IOMUX_PAD(0x03FC, 0x0134, 7, 0x0000, 0, 0),
+
+ MX6_PAD_LCD_DATA08__LCD_DATA08 = IOMUX_PAD(0x0400, 0x0138, 0, 0x06F8, 0, 0),
+ MX6_PAD_LCD_DATA08__KEY_COL0 = IOMUX_PAD(0x0400, 0x0138, 1, 0x06A0, 1, 0),
+ MX6_PAD_LCD_DATA08__CSI_DATA09 = IOMUX_PAD(0x0400, 0x0138, 2, 0x05EC, 0, 0),
+ MX6_PAD_LCD_DATA08__ECSPI2_SCLK = IOMUX_PAD(0x0400, 0x0138, 4, 0x061C, 0, 0),
+ MX6_PAD_LCD_DATA08__GPIO2_IO28 = IOMUX_PAD(0x0400, 0x0138, 5, 0x0000, 0, 0),
+ MX6_PAD_LCD_DATA08__ARM_TRACE08 = IOMUX_PAD(0x0400, 0x0138, 6, 0x0000, 0, 0),
+ MX6_PAD_LCD_DATA08__SRC_BOOT_CFG08 = IOMUX_PAD(0x0400, 0x0138, 7, 0x0000, 0, 0),
+
+ MX6_PAD_LCD_DATA09__LCD_DATA09 = IOMUX_PAD(0x0404, 0x013C, 0, 0x06FC, 0, 0),
+ MX6_PAD_LCD_DATA09__KEY_ROW0 = IOMUX_PAD(0x0404, 0x013C, 1, 0x06C0, 1, 0),
+ MX6_PAD_LCD_DATA09__CSI_DATA08 = IOMUX_PAD(0x0404, 0x013C, 2, 0x05E8, 0, 0),
+ MX6_PAD_LCD_DATA09__ECSPI2_MOSI = IOMUX_PAD(0x0404, 0x013C, 4, 0x0624, 0, 0),
+ MX6_PAD_LCD_DATA09__GPIO2_IO29 = IOMUX_PAD(0x0404, 0x013C, 5, 0x0000, 0, 0),
+ MX6_PAD_LCD_DATA09__ARM_TRACE09 = IOMUX_PAD(0x0404, 0x013C, 6, 0x0000, 0, 0),
+ MX6_PAD_LCD_DATA09__SRC_BOOT_CFG09 = IOMUX_PAD(0x0404, 0x013C, 7, 0x0000, 0, 0),
+
+ MX6_PAD_LCD_DATA10__LCD_DATA10 = IOMUX_PAD(0x0408, 0x0140, 0, 0x0700, 1, 0),
+ MX6_PAD_LCD_DATA10__KEY_COL1 = IOMUX_PAD(0x0408, 0x0140, 1, 0x06A4, 1, 0),
+ MX6_PAD_LCD_DATA10__CSI_DATA07 = IOMUX_PAD(0x0408, 0x0140, 2, 0x05E4, 0, 0),
+ MX6_PAD_LCD_DATA10__ECSPI2_MISO = IOMUX_PAD(0x0408, 0x0140, 4, 0x0620, 0, 0),
+ MX6_PAD_LCD_DATA10__GPIO2_IO30 = IOMUX_PAD(0x0408, 0x0140, 5, 0x0000, 0, 0),
+ MX6_PAD_LCD_DATA10__ARM_TRACE10 = IOMUX_PAD(0x0408, 0x0140, 6, 0x0000, 0, 0),
+ MX6_PAD_LCD_DATA10__SRC_BOOT_CFG10 = IOMUX_PAD(0x0408, 0x0140, 7, 0x0000, 0, 0),
+
+ MX6_PAD_LCD_DATA11__LCD_DATA11 = IOMUX_PAD(0x040C, 0x0144, 0, 0x0704, 0, 0),
+ MX6_PAD_LCD_DATA11__KEY_ROW1 = IOMUX_PAD(0x040C, 0x0144, 1, 0x06C4, 1, 0),
+ MX6_PAD_LCD_DATA11__CSI_DATA06 = IOMUX_PAD(0x040C, 0x0144, 2, 0x05E0, 0, 0),
+ MX6_PAD_LCD_DATA11__ECSPI2_SS1 = IOMUX_PAD(0x040C, 0x0144, 4, 0x062C, 0, 0),
+ MX6_PAD_LCD_DATA11__GPIO2_IO31 = IOMUX_PAD(0x040C, 0x0144, 5, 0x0000, 0, 0),
+ MX6_PAD_LCD_DATA11__ARM_TRACE11 = IOMUX_PAD(0x040C, 0x0144, 6, 0x0000, 0, 0),
+ MX6_PAD_LCD_DATA11__SRC_BOOT_CFG11 = IOMUX_PAD(0x040C, 0x0144, 7, 0x0000, 0, 0),
+
+ MX6_PAD_LCD_DATA12__LCD_DATA12 = IOMUX_PAD(0x0410, 0x0148, 0, 0x0708, 0, 0),
+ MX6_PAD_LCD_DATA12__KEY_COL2 = IOMUX_PAD(0x0410, 0x0148, 1, 0x06A8, 1, 0),
+ MX6_PAD_LCD_DATA12__CSI_DATA05 = IOMUX_PAD(0x0410, 0x0148, 2, 0x05DC, 0, 0),
+ MX6_PAD_LCD_DATA12__UART5_DCE_RTS = IOMUX_PAD(0x0410, 0x0148, 4, 0x0760, 0, 0),
+ MX6_PAD_LCD_DATA12__UART5_DTE_CTS = IOMUX_PAD(0x0410, 0x0148, 4, 0x0000, 0, 0),
+ MX6_PAD_LCD_DATA12__GPIO3_IO00 = IOMUX_PAD(0x0410, 0x0148, 5, 0x0000, 0, 0),
+ MX6_PAD_LCD_DATA12__ARM_TRACE12 = IOMUX_PAD(0x0410, 0x0148, 6, 0x0000, 0, 0),
+ MX6_PAD_LCD_DATA12__SRC_BOOT_CFG12 = IOMUX_PAD(0x0410, 0x0148, 7, 0x0000, 0, 0),
+
+ MX6_PAD_LCD_DATA13__LCD_DATA13 = IOMUX_PAD(0x0414, 0x014C, 0, 0x070C, 0, 0),
+ MX6_PAD_LCD_DATA13__KEY_ROW2 = IOMUX_PAD(0x0414, 0x014C, 1, 0x06C8, 1, 0),
+ MX6_PAD_LCD_DATA13__CSI_DATA04 = IOMUX_PAD(0x0414, 0x014C, 2, 0x05D8, 0, 0),
+ MX6_PAD_LCD_DATA13__UART5_DCE_CTS = IOMUX_PAD(0x0414, 0x014C, 4, 0x0000, 0, 0),
+ MX6_PAD_LCD_DATA13__UART5_DTE_RTS = IOMUX_PAD(0x0414, 0x014C, 4, 0x0760, 1, 0),
+ MX6_PAD_LCD_DATA13__GPIO3_IO01 = IOMUX_PAD(0x0414, 0x014C, 5, 0x0000, 0, 0),
+ MX6_PAD_LCD_DATA13__ARM_TRACE13 = IOMUX_PAD(0x0414, 0x014C, 6, 0x0000, 0, 0),
+ MX6_PAD_LCD_DATA13__SRC_BOOT_CFG13 = IOMUX_PAD(0x0414, 0x014C, 7, 0x0000, 0, 0),
+
+ MX6_PAD_LCD_DATA14__LCD_DATA14 = IOMUX_PAD(0x0418, 0x0150, 0, 0x0710, 0, 0),
+ MX6_PAD_LCD_DATA14__KEY_COL3 = IOMUX_PAD(0x0418, 0x0150, 1, 0x06AC, 1, 0),
+ MX6_PAD_LCD_DATA14__CSI_DATA03 = IOMUX_PAD(0x0418, 0x0150, 2, 0x05D4, 0, 0),
+ MX6_PAD_LCD_DATA14__UART5_DCE_RX = IOMUX_PAD(0x0418, 0x0150, 4, 0x0764, 0, 0),
+ MX6_PAD_LCD_DATA14__UART5_DTE_TX = IOMUX_PAD(0x0418, 0x0150, 4, 0x0000, 0, 0),
+ MX6_PAD_LCD_DATA14__GPIO3_IO02 = IOMUX_PAD(0x0418, 0x0150, 5, 0x0000, 0, 0),
+ MX6_PAD_LCD_DATA14__ARM_TRACE14 = IOMUX_PAD(0x0418, 0x0150, 6, 0x0000, 0, 0),
+ MX6_PAD_LCD_DATA14__SRC_BOOT_CFG14 = IOMUX_PAD(0x0418, 0x0150, 7, 0x0000, 0, 0),
+
+ MX6_PAD_LCD_DATA15__LCD_DATA15 = IOMUX_PAD(0x041C, 0x0154, 0, 0x0714, 0, 0),
+ MX6_PAD_LCD_DATA15__KEY_ROW3 = IOMUX_PAD(0x041C, 0x0154, 1, 0x06CC, 0, 0),
+ MX6_PAD_LCD_DATA15__CSI_DATA02 = IOMUX_PAD(0x041C, 0x0154, 2, 0x05D0, 0, 0),
+ MX6_PAD_LCD_DATA15__UART5_DCE_TX = IOMUX_PAD(0x041C, 0x0154, 4, 0x0000, 0, 0),
+ MX6_PAD_LCD_DATA15__UART5_DTE_RX = IOMUX_PAD(0x041C, 0x0154, 4, 0x0764, 1, 0),
+ MX6_PAD_LCD_DATA15__GPIO3_IO03 = IOMUX_PAD(0x041C, 0x0154, 5, 0x0000, 0, 0),
+ MX6_PAD_LCD_DATA15__ARM_TRACE15 = IOMUX_PAD(0x041C, 0x0154, 6, 0x0000, 0, 0),
+ MX6_PAD_LCD_DATA15__SRC_BOOT_CFG15 = IOMUX_PAD(0x041C, 0x0154, 7, 0x0000, 0, 0),
+
+ MX6_PAD_LCD_DATA16__LCD_DATA16 = IOMUX_PAD(0x0420, 0x0158, 0, 0x0718, 0, 0),
+ MX6_PAD_LCD_DATA16__KEY_COL4 = IOMUX_PAD(0x0420, 0x0158, 1, 0x06B0, 0, 0),
+ MX6_PAD_LCD_DATA16__CSI_DATA01 = IOMUX_PAD(0x0420, 0x0158, 2, 0x05CC, 0, 0),
+ MX6_PAD_LCD_DATA16__I2C2_SCL = IOMUX_PAD(0x0420, 0x0158, IOMUX_CONFIG_SION | 4, 0x0684, 1, 0),
+ MX6_PAD_LCD_DATA16__GPIO3_IO04 = IOMUX_PAD(0x0420, 0x0158, 5, 0x0000, 0, 0),
+ MX6_PAD_LCD_DATA16__SRC_BOOT_CFG24 = IOMUX_PAD(0x0420, 0x0158, 7, 0x0000, 0, 0),
+
+ MX6_PAD_LCD_DATA17__LCD_DATA17 = IOMUX_PAD(0x0424, 0x015C, 0, 0x071C, 0, 0),
+ MX6_PAD_LCD_DATA17__KEY_ROW4 = IOMUX_PAD(0x0424, 0x015C, 1, 0x06D0, 0, 0),
+ MX6_PAD_LCD_DATA17__CSI_DATA00 = IOMUX_PAD(0x0424, 0x015C, 2, 0x05C8, 0, 0),
+ MX6_PAD_LCD_DATA17__I2C2_SDA = IOMUX_PAD(0x0424, 0x015C, IOMUX_CONFIG_SION | 4, 0x0688, 1, 0),
+ MX6_PAD_LCD_DATA17__GPIO3_IO05 = IOMUX_PAD(0x0424, 0x015C, 5, 0x0000, 0, 0),
+ MX6_PAD_LCD_DATA17__SRC_BOOT_CFG25 = IOMUX_PAD(0x0424, 0x015C, 7, 0x0000, 0, 0),
+
+ MX6_PAD_LCD_DATA18__LCD_DATA18 = IOMUX_PAD(0x0428, 0x0160, 0, 0x0720, 0, 0),
+ MX6_PAD_LCD_DATA18__KEY_COL5 = IOMUX_PAD(0x0428, 0x0160, 1, 0x0694, 2, 0),
+ MX6_PAD_LCD_DATA18__CSI_DATA15 = IOMUX_PAD(0x0428, 0x0160, 2, 0x05C4, 1, 0),
+ MX6_PAD_LCD_DATA18__GPT_CAPTURE1 = IOMUX_PAD(0x0428, 0x0160, 4, 0x0670, 1, 0),
+ MX6_PAD_LCD_DATA18__GPIO3_IO06 = IOMUX_PAD(0x0428, 0x0160, 5, 0x0000, 0, 0),
+ MX6_PAD_LCD_DATA18__SRC_BOOT_CFG26 = IOMUX_PAD(0x0428, 0x0160, 7, 0x0000, 0, 0),
+
+ MX6_PAD_LCD_DATA19__LCD_DATA19 = IOMUX_PAD(0x042C, 0x0164, 0, 0x0724, 0, 0),
+ MX6_PAD_LCD_DATA19__KEY_ROW5 = IOMUX_PAD(0x042C, 0x0164, 1, 0x06B4, 1, 0),
+ MX6_PAD_LCD_DATA19__CSI_DATA14 = IOMUX_PAD(0x042C, 0x0164, 2, 0x05C0, 2, 0),
+ MX6_PAD_LCD_DATA19__GPT_CAPTURE2 = IOMUX_PAD(0x042C, 0x0164, 4, 0x0674, 1, 0),
+ MX6_PAD_LCD_DATA19__GPIO3_IO07 = IOMUX_PAD(0x042C, 0x0164, 5, 0x0000, 0, 0),
+ MX6_PAD_LCD_DATA19__SRC_BOOT_CFG27 = IOMUX_PAD(0x042C, 0x0164, 7, 0x0000, 0, 0),
+
+ MX6_PAD_LCD_DATA20__LCD_DATA20 = IOMUX_PAD(0x0430, 0x0168, 0, 0x0728, 0, 0),
+ MX6_PAD_LCD_DATA20__KEY_COL6 = IOMUX_PAD(0x0430, 0x0168, 1, 0x0698, 1, 0),
+ MX6_PAD_LCD_DATA20__CSI_DATA13 = IOMUX_PAD(0x0430, 0x0168, 2, 0x05BC, 2, 0),
+ MX6_PAD_LCD_DATA20__GPT_COMPARE1 = IOMUX_PAD(0x0430, 0x0168, 4, 0x0000, 0, 0),
+ MX6_PAD_LCD_DATA20__GPIO3_IO08 = IOMUX_PAD(0x0430, 0x0168, 5, 0x0000, 0, 0),
+ MX6_PAD_LCD_DATA20__SRC_BOOT_CFG28 = IOMUX_PAD(0x0430, 0x0168, 7, 0x0000, 0, 0),
+
+ MX6_PAD_LCD_DATA21__LCD_DATA21 = IOMUX_PAD(0x0434, 0x016C, 0, 0x072C, 0, 0),
+ MX6_PAD_LCD_DATA21__KEY_ROW6 = IOMUX_PAD(0x0434, 0x016C, 1, 0x06B8, 1, 0),
+ MX6_PAD_LCD_DATA21__CSI_DATA12 = IOMUX_PAD(0x0434, 0x016C, 2, 0x05B8, 2, 0),
+ MX6_PAD_LCD_DATA21__GPT_COMPARE2 = IOMUX_PAD(0x0434, 0x016C, 4, 0x0000, 0, 0),
+ MX6_PAD_LCD_DATA21__GPIO3_IO09 = IOMUX_PAD(0x0434, 0x016C, 5, 0x0000, 0, 0),
+ MX6_PAD_LCD_DATA21__SRC_BOOT_CFG29 = IOMUX_PAD(0x0434, 0x016C, 7, 0x0000, 0, 0),
+
+ MX6_PAD_LCD_DATA22__LCD_DATA22 = IOMUX_PAD(0x0438, 0x0170, 0, 0x0730, 0, 0),
+ MX6_PAD_LCD_DATA22__KEY_COL7 = IOMUX_PAD(0x0438, 0x0170, 1, 0x069C, 1, 0),
+ MX6_PAD_LCD_DATA22__CSI_DATA11 = IOMUX_PAD(0x0438, 0x0170, 2, 0x05B4, 1, 0),
+ MX6_PAD_LCD_DATA22__GPT_COMPARE3 = IOMUX_PAD(0x0438, 0x0170, 4, 0x0000, 0, 0),
+ MX6_PAD_LCD_DATA22__GPIO3_IO10 = IOMUX_PAD(0x0438, 0x0170, 5, 0x0000, 0, 0),
+ MX6_PAD_LCD_DATA22__SRC_BOOT_CFG30 = IOMUX_PAD(0x0438, 0x0170, 7, 0x0000, 0, 0),
+
+ MX6_PAD_LCD_DATA23__LCD_DATA23 = IOMUX_PAD(0x043C, 0x0174, 0, 0x0734, 0, 0),
+ MX6_PAD_LCD_DATA23__KEY_ROW7 = IOMUX_PAD(0x043C, 0x0174, 1, 0x06BC, 1, 0),
+ MX6_PAD_LCD_DATA23__CSI_DATA10 = IOMUX_PAD(0x043C, 0x0174, 2, 0x05B0, 1, 0),
+ MX6_PAD_LCD_DATA23__GPT_CLKIN = IOMUX_PAD(0x043C, 0x0174, 4, 0x0678, 1, 0),
+ MX6_PAD_LCD_DATA23__GPIO3_IO11 = IOMUX_PAD(0x043C, 0x0174, 5, 0x0000, 0, 0),
+ MX6_PAD_LCD_DATA23__SRC_BOOT_CFG31 = IOMUX_PAD(0x043C, 0x0174, 7, 0x0000, 0, 0),
+
+ MX6_PAD_AUD_RXFS__AUD3_RXFS = IOMUX_PAD(0x0440, 0x0178, 0, 0x0000, 0, 0),
+ MX6_PAD_AUD_RXFS__I2C1_SCL = IOMUX_PAD(0x0440, 0x0178, IOMUX_CONFIG_SION | 1, 0x067C, 1, 0),
+ MX6_PAD_AUD_RXFS__UART3_DCE_RX = IOMUX_PAD(0x0440, 0x0178, 2, 0x0754, 0, 0),
+ MX6_PAD_AUD_RXFS__UART3_DTE_TX = IOMUX_PAD(0x0440, 0x0178, 2, 0x0000, 0, 0),
+ MX6_PAD_AUD_RXFS__I2C3_SCL = IOMUX_PAD(0x0440, 0x0178, IOMUX_CONFIG_SION | 4, 0x068C, 1, 0),
+ MX6_PAD_AUD_RXFS__GPIO1_IO00 = IOMUX_PAD(0x0440, 0x0178, 5, 0x0000, 0, 0),
+ MX6_PAD_AUD_RXFS__ECSPI3_SS0 = IOMUX_PAD(0x0440, 0x0178, 6, 0x0648, 0, 0),
+ MX6_PAD_AUD_RXFS__MBIST_BEND = IOMUX_PAD(0x0440, 0x0178, 7, 0x0000, 0, 0),
+
+ MX6_PAD_AUD_RXC__AUD3_RXC = IOMUX_PAD(0x0444, 0x017C, 0, 0x0000, 0, 0),
+ MX6_PAD_AUD_RXC__I2C1_SDA = IOMUX_PAD(0x0444, 0x017C, IOMUX_CONFIG_SION | 1, 0x0680, 1, 0),
+ MX6_PAD_AUD_RXC__UART3_DCE_TX = IOMUX_PAD(0x0444, 0x017C, 2, 0x0000, 0, 0),
+ MX6_PAD_AUD_RXC__UART3_DTE_RX = IOMUX_PAD(0x0444, 0x017C, 2, 0x0754, 1, 0),
+ MX6_PAD_AUD_RXC__I2C3_SDA = IOMUX_PAD(0x0444, 0x017C, IOMUX_CONFIG_SION | 4, 0x0690, 1, 0),
+ MX6_PAD_AUD_RXC__GPIO1_IO01 = IOMUX_PAD(0x0444, 0x017C, 5, 0x0000, 0, 0),
+ MX6_PAD_AUD_RXC__ECSPI3_SS1 = IOMUX_PAD(0x0444, 0x017C, 6, 0x064C, 0, 0),
+
+ MX6_PAD_AUD_RXD__AUD3_RXD = IOMUX_PAD(0x0448, 0x0180, 0, 0x0000, 0, 0),
+ MX6_PAD_AUD_RXD__ECSPI3_MOSI = IOMUX_PAD(0x0448, 0x0180, 1, 0x063C, 0, 0),
+ MX6_PAD_AUD_RXD__UART4_DCE_RX = IOMUX_PAD(0x0448, 0x0180, 2, 0x075C, 0, 0),
+ MX6_PAD_AUD_RXD__UART4_DTE_TX = IOMUX_PAD(0x0448, 0x0180, 2, 0x0000, 0, 0),
+ MX6_PAD_AUD_RXD__SD1_LCTL = IOMUX_PAD(0x0448, 0x0180, 4, 0x0000, 0, 0),
+ MX6_PAD_AUD_RXD__GPIO1_IO02 = IOMUX_PAD(0x0448, 0x0180, 5, 0x0000, 0, 0),
+
+ MX6_PAD_AUD_TXC__AUD3_TXC = IOMUX_PAD(0x044C, 0x0184, 0, 0x0000, 0, 0),
+ MX6_PAD_AUD_TXC__ECSPI3_MISO = IOMUX_PAD(0x044C, 0x0184, 1, 0x0638, 0, 0),
+ MX6_PAD_AUD_TXC__UART4_DCE_TX = IOMUX_PAD(0x044C, 0x0184, 2, 0x0000, 0, 0),
+ MX6_PAD_AUD_TXC__UART4_DTE_RX = IOMUX_PAD(0x044C, 0x0184, 2, 0x075C, 1, 0),
+ MX6_PAD_AUD_TXC__SD2_LCTL = IOMUX_PAD(0x044C, 0x0184, 4, 0x0000, 0, 0),
+ MX6_PAD_AUD_TXC__GPIO1_IO03 = IOMUX_PAD(0x044C, 0x0184, 5, 0x0000, 0, 0),
+
+ MX6_PAD_AUD_TXFS__AUD3_TXFS = IOMUX_PAD(0x0450, 0x0188, 0, 0x0000, 0, 0),
+ MX6_PAD_AUD_TXFS__PWM3_OUT = IOMUX_PAD(0x0450, 0x0188, 1, 0x0000, 0, 0),
+ MX6_PAD_AUD_TXFS__UART4_DCE_RTS = IOMUX_PAD(0x0450, 0x0188, 2, 0x0758, 0, 0),
+ MX6_PAD_AUD_TXFS__UART4_DTE_CTS = IOMUX_PAD(0x0450, 0x0188, 2, 0x0000, 0, 0),
+ MX6_PAD_AUD_TXFS__SD3_LCTL = IOMUX_PAD(0x0450, 0x0188, 4, 0x0000, 0, 0),
+ MX6_PAD_AUD_TXFS__GPIO1_IO04 = IOMUX_PAD(0x0450, 0x0188, 5, 0x0000, 0, 0),
+
+ MX6_PAD_AUD_TXD__AUD3_TXD = IOMUX_PAD(0x0454, 0x018C, 0, 0x0000, 0, 0),
+ MX6_PAD_AUD_TXD__ECSPI3_SCLK = IOMUX_PAD(0x0454, 0x018C, 1, 0x0630, 0, 0),
+ MX6_PAD_AUD_TXD__UART4_DCE_CTS = IOMUX_PAD(0x0454, 0x018C, 2, 0x0000, 0, 0),
+ MX6_PAD_AUD_TXD__UART4_DTE_RTS = IOMUX_PAD(0x0454, 0x018C, 2, 0x0758, 1, 0),
+ MX6_PAD_AUD_TXD__GPIO1_IO05 = IOMUX_PAD(0x0454, 0x018C, 5, 0x0000, 0, 0),
+
+ MX6_PAD_AUD_MCLK__AUDIO_CLK_OUT = IOMUX_PAD(0x0458, 0x0190, 0, 0x0000, 0, 0),
+ MX6_PAD_AUD_MCLK__PWM4_OUT = IOMUX_PAD(0x0458, 0x0190, 1, 0x0000, 0, 0),
+ MX6_PAD_AUD_MCLK__ECSPI3_RDY = IOMUX_PAD(0x0458, 0x0190, 2, 0x0634, 0, 0),
+ MX6_PAD_AUD_MCLK__WDOG2_RESET_B_DEB = IOMUX_PAD(0x0458, 0x0190, 4, 0x0000, 0, 0),
+ MX6_PAD_AUD_MCLK__GPIO1_IO06 = IOMUX_PAD(0x0458, 0x0190, 5, 0x0000, 0, 0),
+ MX6_PAD_AUD_MCLK__SPDIF_EXT_CLK = IOMUX_PAD(0x0458, 0x0190, 6, 0x073C, 1, 0),
+
+ MX6_PAD_UART1_RXD__UART1_DCE_RX = IOMUX_PAD(0x045C, 0x0194, 0, 0x0744, 0, 0),
+
+ MX6_PAD_UART1_RXD__UART1_DTE_TX = IOMUX_PAD(0x045C, 0x0194, 0, 0x0000, 0, 0),
+ MX6_PAD_UART1_RXD__PWM1_OUT = IOMUX_PAD(0x045C, 0x0194, 1, 0x0000, 0, 0),
+ MX6_PAD_UART1_RXD__UART4_DCE_RX = IOMUX_PAD(0x045C, 0x0194, 2, 0x075C, 4, 0),
+ MX6_PAD_UART1_RXD__UART4_DTE_TX = IOMUX_PAD(0x045C, 0x0194, 2, 0x0000, 0, 0),
+ MX6_PAD_UART1_RXD__UART5_DCE_RX = IOMUX_PAD(0x045C, 0x0194, 4, 0x0764, 6, 0),
+ MX6_PAD_UART1_RXD__UART5_DTE_TX = IOMUX_PAD(0x045C, 0x0194, 4, 0x0000, 0, 0),
+ MX6_PAD_UART1_RXD__GPIO3_IO16 = IOMUX_PAD(0x045C, 0x0194, 5, 0x0000, 0, 0),
+
+ MX6_PAD_UART1_TXD__UART1_DCE_TX = IOMUX_PAD(0x0460, 0x0198, 0, 0x0000, 0, 0),
+
+ MX6_PAD_UART1_TXD__UART1_DTE_RX = IOMUX_PAD(0x0460, 0x0198, 0, 0x0744, 1, 0),
+ MX6_PAD_UART1_TXD__PWM2_OUT = IOMUX_PAD(0x0460, 0x0198, 1, 0x0000, 0, 0),
+ MX6_PAD_UART1_TXD__UART4_DCE_TX = IOMUX_PAD(0x0460, 0x0198, 2, 0x0000, 0, 0),
+ MX6_PAD_UART1_TXD__UART4_DTE_RX = IOMUX_PAD(0x0460, 0x0198, 2, 0x075C, 5, 0),
+ MX6_PAD_UART1_TXD__UART5_DCE_TX = IOMUX_PAD(0x0460, 0x0198, 4, 0x0000, 0, 0),
+ MX6_PAD_UART1_TXD__UART5_DTE_RX = IOMUX_PAD(0x0460, 0x0198, 4, 0x0764, 7, 0),
+ MX6_PAD_UART1_TXD__GPIO3_IO17 = IOMUX_PAD(0x0460, 0x0198, 5, 0x0000, 0, 0),
+ MX6_PAD_UART1_TXD__UART5_DCD_B = IOMUX_PAD(0x0460, 0x0198, 7, 0x0000, 0, 0),
+
+ MX6_PAD_I2C1_SCL__I2C1_SCL = IOMUX_PAD(0x0464, 0x019C, IOMUX_CONFIG_SION | 0, 0x067C, 0, 0),
+ MX6_PAD_I2C1_SCL__UART1_DCE_RTS = IOMUX_PAD(0x0464, 0x019C, 1, 0x0740, 0, 0),
+ MX6_PAD_I2C1_SCL__UART1_DTE_CTS = IOMUX_PAD(0x0464, 0x019C, 1, 0x0000, 0, 0),
+ MX6_PAD_I2C1_SCL__ECSPI3_SS2 = IOMUX_PAD(0x0464, 0x019C, 2, 0x0640, 0, 0),
+ MX6_PAD_I2C1_SCL__SD3_RESET = IOMUX_PAD(0x0464, 0x019C, 4, 0x0000, 0, 0),
+ MX6_PAD_I2C1_SCL__GPIO3_IO12 = IOMUX_PAD(0x0464, 0x019C, 5, 0x0000, 0, 0),
+ MX6_PAD_I2C1_SCL__ECSPI1_SS1 = IOMUX_PAD(0x0464, 0x019C, 6, 0x060C, 0, 0),
+
+ MX6_PAD_I2C1_SDA__I2C1_SDA = IOMUX_PAD(0x0468, 0x01A0, IOMUX_CONFIG_SION | 0, 0x0680, 0, 0),
+ MX6_PAD_I2C1_SDA__UART1_DCE_CTS = IOMUX_PAD(0x0468, 0x01A0, 1, 0x0000, 0, 0),
+ MX6_PAD_I2C1_SDA__UART1_DTE_RTS = IOMUX_PAD(0x0468, 0x01A0, 1, 0x0740, 1, 0),
+ MX6_PAD_I2C1_SDA__ECSPI3_SS3 = IOMUX_PAD(0x0468, 0x01A0, 2, 0x0644, 0, 0),
+ MX6_PAD_I2C1_SDA__SD3_VSELECT = IOMUX_PAD(0x0468, 0x01A0, 4, 0x0000, 0, 0),
+ MX6_PAD_I2C1_SDA__GPIO3_IO13 = IOMUX_PAD(0x0468, 0x01A0, 5, 0x0000, 0, 0),
+ MX6_PAD_I2C1_SDA__ECSPI1_SS2 = IOMUX_PAD(0x0468, 0x01A0, 6, 0x0610, 0, 0),
+
+ MX6_PAD_I2C2_SCL__I2C2_SCL = IOMUX_PAD(0x046C, 0x01A4, IOMUX_CONFIG_SION | 0, 0x0684, 3, 0),
+ MX6_PAD_I2C2_SCL__AUD4_RXFS = IOMUX_PAD(0x046C, 0x01A4, 1, 0x0570, 2, 0),
+ MX6_PAD_I2C2_SCL__SPDIF_IN = IOMUX_PAD(0x046C, 0x01A4, 2, 0x0738, 2, 0),
+ MX6_PAD_I2C2_SCL__SD3_WP = IOMUX_PAD(0x046C, 0x01A4, 4, 0x0794, 3, 0),
+ MX6_PAD_I2C2_SCL__GPIO3_IO14 = IOMUX_PAD(0x046C, 0x01A4, 5, 0x0000, 0, 0),
+ MX6_PAD_I2C2_SCL__ECSPI1_RDY = IOMUX_PAD(0x046C, 0x01A4, 6, 0x0600, 1, 0),
+
+ MX6_PAD_I2C2_SDA__I2C2_SDA = IOMUX_PAD(0x0470, 0x01A8, IOMUX_CONFIG_SION | 0, 0x0688, 3, 0),
+ MX6_PAD_I2C2_SDA__AUD4_RXC = IOMUX_PAD(0x0470, 0x01A8, 1, 0x056C, 2, 0),
+ MX6_PAD_I2C2_SDA__SPDIF_OUT = IOMUX_PAD(0x0470, 0x01A8, 2, 0x0000, 0, 0),
+ MX6_PAD_I2C2_SDA__SD3_CD_B = IOMUX_PAD(0x0470, 0x01A8, 4, 0x0780, 3, 0),
+ MX6_PAD_I2C2_SDA__GPIO3_IO15 = IOMUX_PAD(0x0470, 0x01A8, 5, 0x0000, 0, 0),
+
+ MX6_PAD_ECSPI1_SCLK__ECSPI1_SCLK = IOMUX_PAD(0x0474, 0x01AC, 0, 0x05FC, 1, 0),
+ MX6_PAD_ECSPI1_SCLK__AUD4_TXD = IOMUX_PAD(0x0474, 0x01AC, 1, 0x0568, 1, 0),
+ MX6_PAD_ECSPI1_SCLK__UART5_DCE_RX = IOMUX_PAD(0x0474, 0x01AC, 2, 0x0764, 2, 0),
+ MX6_PAD_ECSPI1_SCLK__UART5_DTE_TX = IOMUX_PAD(0x0474, 0x01AC, 2, 0x0000, 0, 0),
+ MX6_PAD_ECSPI1_SCLK__EPDC_VCOM0 = IOMUX_PAD(0x0474, 0x01AC, 3, 0x0000, 0, 0),
+ MX6_PAD_ECSPI1_SCLK__SD2_RESET = IOMUX_PAD(0x0474, 0x01AC, 4, 0x0000, 0, 0),
+ MX6_PAD_ECSPI1_SCLK__GPIO4_IO08 = IOMUX_PAD(0x0474, 0x01AC, 5, 0x0000, 0, 0),
+ MX6_PAD_ECSPI1_SCLK__USB_OTG2_OC = IOMUX_PAD(0x0474, 0x01AC, 6, 0x0768, 1, 0),
+
+ MX6_PAD_ECSPI1_MOSI__ECSPI1_MOSI = IOMUX_PAD(0x0478, 0x01B0, 0, 0x0608, 1, 0),
+ MX6_PAD_ECSPI1_MOSI__AUD4_TXC = IOMUX_PAD(0x0478, 0x01B0, 1, 0x0574, 1, 0),
+ MX6_PAD_ECSPI1_MOSI__UART5_DCE_TX = IOMUX_PAD(0x0478, 0x01B0, 2, 0x0000, 0, 0),
+ MX6_PAD_ECSPI1_MOSI__UART5_DTE_RX = IOMUX_PAD(0x0478, 0x01B0, 2, 0x0764, 3, 0),
+ MX6_PAD_ECSPI1_MOSI__EPDC_VCOM1 = IOMUX_PAD(0x0478, 0x01B0, 3, 0x0000, 0, 0),
+ MX6_PAD_ECSPI1_MOSI__SD2_VSELECT = IOMUX_PAD(0x0478, 0x01B0, 4, 0x0000, 0, 0),
+ MX6_PAD_ECSPI1_MOSI__GPIO4_IO09 = IOMUX_PAD(0x0478, 0x01B0, 5, 0x0000, 0, 0),
+
+ MX6_PAD_ECSPI1_MISO__ECSPI1_MISO = IOMUX_PAD(0x047C, 0x01B4, 0, 0x0604, 1, 0),
+ MX6_PAD_ECSPI1_MISO__AUD4_TXFS = IOMUX_PAD(0x047C, 0x01B4, 1, 0x0578, 1, 0),
+ MX6_PAD_ECSPI1_MISO__UART5_DCE_RTS = IOMUX_PAD(0x047C, 0x01B4, 2, 0x0760, 2, 0),
+ MX6_PAD_ECSPI1_MISO__UART5_DTE_CTS = IOMUX_PAD(0x047C, 0x01B4, 2, 0x0000, 0, 0),
+ MX6_PAD_ECSPI1_MISO__EPDC_BDR0 = IOMUX_PAD(0x047C, 0x01B4, 3, 0x0000, 0, 0),
+ MX6_PAD_ECSPI1_MISO__SD2_WP = IOMUX_PAD(0x047C, 0x01B4, 4, 0x077C, 0, 0),
+ MX6_PAD_ECSPI1_MISO__GPIO4_IO10 = IOMUX_PAD(0x047C, 0x01B4, 5, 0x0000, 0, 0),
+
+ MX6_PAD_ECSPI1_SS0__ECSPI1_SS0 = IOMUX_PAD(0x0480, 0x01B8, 0, 0x0614, 1, 0),
+ MX6_PAD_ECSPI1_SS0__AUD4_RXD = IOMUX_PAD(0x0480, 0x01B8, 1, 0x0564, 1, 0),
+ MX6_PAD_ECSPI1_SS0__UART5_DCE_CTS = IOMUX_PAD(0x0480, 0x01B8, 2, 0x0000, 0, 0),
+ MX6_PAD_ECSPI1_SS0__UART5_DTE_RTS = IOMUX_PAD(0x0480, 0x01B8, 2, 0x0760, 3, 0),
+ MX6_PAD_ECSPI1_SS0__EPDC_BDR1 = IOMUX_PAD(0x0480, 0x01B8, 3, 0x0000, 0, 0),
+ MX6_PAD_ECSPI1_SS0__SD2_CD_B = IOMUX_PAD(0x0480, 0x01B8, 4, 0x0778, 0, 0),
+ MX6_PAD_ECSPI1_SS0__GPIO4_IO11 = IOMUX_PAD(0x0480, 0x01B8, 5, 0x0000, 0, 0),
+ MX6_PAD_ECSPI1_SS0__USB_OTG2_PWR = IOMUX_PAD(0x0480, 0x01B8, 6, 0x0000, 0, 0),
+
+ MX6_PAD_ECSPI2_SCLK__ECSPI2_SCLK = IOMUX_PAD(0x0484, 0x01BC, 0, 0x061C, 1, 0),
+ MX6_PAD_ECSPI2_SCLK__SPDIF_EXT_CLK = IOMUX_PAD(0x0484, 0x01BC, 1, 0x073C, 2, 0),
+ MX6_PAD_ECSPI2_SCLK__UART3_DCE_RX = IOMUX_PAD(0x0484, 0x01BC, 2, 0x0754, 2, 0),
+ MX6_PAD_ECSPI2_SCLK__UART3_DTE_TX = IOMUX_PAD(0x0484, 0x01BC, 2, 0x0000, 0, 0),
+ MX6_PAD_ECSPI2_SCLK__CSI_PIXCLK = IOMUX_PAD(0x0484, 0x01BC, 3, 0x05F4, 1, 0),
+ MX6_PAD_ECSPI2_SCLK__SD1_RESET = IOMUX_PAD(0x0484, 0x01BC, 4, 0x0000, 0, 0),
+ MX6_PAD_ECSPI2_SCLK__GPIO4_IO12 = IOMUX_PAD(0x0484, 0x01BC, 5, 0x0000, 0, 0),
+ MX6_PAD_ECSPI2_SCLK__USB_OTG2_OC = IOMUX_PAD(0x0484, 0x01BC, 6, 0x0768, 2, 0),
+
+ MX6_PAD_ECSPI2_MOSI__ECSPI2_MOSI = IOMUX_PAD(0x0488, 0x01C0, 0, 0x0624, 1, 0),
+ MX6_PAD_ECSPI2_MOSI__SDMA_EXT_EVENT1 = IOMUX_PAD(0x0488, 0x01C0, 1, 0x0000, 0, 0),
+ MX6_PAD_ECSPI2_MOSI__UART3_DCE_TX = IOMUX_PAD(0x0488, 0x01C0, 2, 0x0000, 0, 0),
+ MX6_PAD_ECSPI2_MOSI__UART3_DTE_RX = IOMUX_PAD(0x0488, 0x01C0, 2, 0x0754, 3, 0),
+ MX6_PAD_ECSPI2_MOSI__CSI_HSYNC = IOMUX_PAD(0x0488, 0x01C0, 3, 0x05F0, 1, 0),
+ MX6_PAD_ECSPI2_MOSI__SD1_VSELECT = IOMUX_PAD(0x0488, 0x01C0, 4, 0x0000, 0, 0),
+ MX6_PAD_ECSPI2_MOSI__GPIO4_IO13 = IOMUX_PAD(0x0488, 0x01C0, 5, 0x0000, 0, 0),
+
+ MX6_PAD_ECSPI2_MISO__ECSPI2_MISO = IOMUX_PAD(0x048C, 0x01C4, 0, 0x0620, 1, 0),
+ MX6_PAD_ECSPI2_MISO__SDMA_EXT_EVENT0 = IOMUX_PAD(0x048C, 0x01C4, 1, 0x0000, 0, 0),
+ MX6_PAD_ECSPI2_MISO__UART3_DCE_RTS = IOMUX_PAD(0x048C, 0x01C4, 2, 0x0750, 0, 0),
+ MX6_PAD_ECSPI2_MISO__UART3_DTE_CTS = IOMUX_PAD(0x048C, 0x01C4, 2, 0x0000, 0, 0),
+ MX6_PAD_ECSPI2_MISO__CSI_MCLK = IOMUX_PAD(0x048C, 0x01C4, 3, 0x0000, 0, 0),
+ MX6_PAD_ECSPI2_MISO__SD1_WP = IOMUX_PAD(0x048C, 0x01C4, 4, 0x0774, 2, 0),
+ MX6_PAD_ECSPI2_MISO__GPIO4_IO14 = IOMUX_PAD(0x048C, 0x01C4, 5, 0x0000, 0, 0),
+ MX6_PAD_ECSPI2_MISO__USB_OTG1_OC = IOMUX_PAD(0x048C, 0x01C4, 6, 0x076C, 1, 0),
+
+ MX6_PAD_ECSPI2_SS0__ECSPI2_SS0 = IOMUX_PAD(0x0490, 0x01C8, 0, 0x0628, 0, 0),
+ MX6_PAD_ECSPI2_SS0__ECSPI1_SS3 = IOMUX_PAD(0x0490, 0x01C8, 1, 0x0618, 1, 0),
+ MX6_PAD_ECSPI2_SS0__UART3_DCE_CTS = IOMUX_PAD(0x0490, 0x01C8, 2, 0x0000, 0, 0),
+ MX6_PAD_ECSPI2_SS0__UART3_DTE_RTS = IOMUX_PAD(0x0490, 0x01C8, 2, 0x0750, 1, 0),
+ MX6_PAD_ECSPI2_SS0__CSI_VSYNC = IOMUX_PAD(0x0490, 0x01C8, 3, 0x05F8, 1, 0),
+ MX6_PAD_ECSPI2_SS0__SD1_CD_B = IOMUX_PAD(0x0490, 0x01C8, 4, 0x0770, 2, 0),
+ MX6_PAD_ECSPI2_SS0__GPIO4_IO15 = IOMUX_PAD(0x0490, 0x01C8, 5, 0x0000, 0, 0),
+ MX6_PAD_ECSPI2_SS0__USB_OTG1_PWR = IOMUX_PAD(0x0490, 0x01C8, 6, 0x0000, 0, 0),
+
+ MX6_PAD_SD1_CLK__SD1_CLK = IOMUX_PAD(0x0494, 0x01CC, 0, 0x0000, 0, 0),
+ MX6_PAD_SD1_CLK__KEY_COL0 = IOMUX_PAD(0x0494, 0x01CC, 2, 0x06A0, 2, 0),
+ MX6_PAD_SD1_CLK__EPDC_SDCE4 = IOMUX_PAD(0x0494, 0x01CC, 3, 0x0000, 0, 0),
+ MX6_PAD_SD1_CLK__GPIO5_IO15 = IOMUX_PAD(0x0494, 0x01CC, 5, 0x0000, 0, 0),
+
+ MX6_PAD_SD1_CMD__SD1_CMD = IOMUX_PAD(0x0498, 0x01D0, 0, 0x0000, 0, 0),
+ MX6_PAD_SD1_CMD__KEY_ROW0 = IOMUX_PAD(0x0498, 0x01D0, 2, 0x06C0, 2, 0),
+ MX6_PAD_SD1_CMD__EPDC_SDCE5 = IOMUX_PAD(0x0498, 0x01D0, 3, 0x0000, 0, 0),
+ MX6_PAD_SD1_CMD__GPIO5_IO14 = IOMUX_PAD(0x0498, 0x01D0, 5, 0x0000, 0, 0),
+
+ MX6_PAD_SD1_DATA0__SD1_DATA0 = IOMUX_PAD(0x049C, 0x01D4, 0, 0x0000, 0, 0),
+ MX6_PAD_SD1_DATA0__KEY_COL1 = IOMUX_PAD(0x049C, 0x01D4, 2, 0x06A4, 2, 0),
+ MX6_PAD_SD1_DATA0__EPDC_SDCE6 = IOMUX_PAD(0x049C, 0x01D4, 3, 0x0000, 0, 0),
+ MX6_PAD_SD1_DATA0__GPIO5_IO11 = IOMUX_PAD(0x049C, 0x01D4, 5, 0x0000, 0, 0),
+
+ MX6_PAD_SD1_DATA1__SD1_DATA1 = IOMUX_PAD(0x04A0, 0x01D8, 0, 0x0000, 0, 0),
+ MX6_PAD_SD1_DATA1__KEY_ROW1 = IOMUX_PAD(0x04A0, 0x01D8, 2, 0x06C4, 2, 0),
+ MX6_PAD_SD1_DATA1__EPDC_SDCE7 = IOMUX_PAD(0x04A0, 0x01D8, 3, 0x0000, 0, 0),
+ MX6_PAD_SD1_DATA1__GPIO5_IO08 = IOMUX_PAD(0x04A0, 0x01D8, 5, 0x0000, 0, 0),
+
+ MX6_PAD_SD1_DATA2__SD1_DATA2 = IOMUX_PAD(0x04A4, 0x01DC, 0, 0x0000, 0, 0),
+ MX6_PAD_SD1_DATA2__KEY_COL2 = IOMUX_PAD(0x04A4, 0x01DC, 2, 0x06A8, 2, 0),
+ MX6_PAD_SD1_DATA2__EPDC_SDCE8 = IOMUX_PAD(0x04A4, 0x01DC, 3, 0x0000, 0, 0),
+ MX6_PAD_SD1_DATA2__GPIO5_IO13 = IOMUX_PAD(0x04A4, 0x01DC, 5, 0x0000, 0, 0),
+
+ MX6_PAD_SD1_DATA3__SD1_DATA3 = IOMUX_PAD(0x04A8, 0x01E0, 0, 0x0000, 0, 0),
+ MX6_PAD_SD1_DATA3__KEY_ROW2 = IOMUX_PAD(0x04A8, 0x01E0, 2, 0x06C8, 2, 0),
+ MX6_PAD_SD1_DATA3__EPDC_SDCE9 = IOMUX_PAD(0x04A8, 0x01E0, 3, 0x0000, 0, 0),
+ MX6_PAD_SD1_DATA3__GPIO5_IO06 = IOMUX_PAD(0x04A8, 0x01E0, 5, 0x0000, 0, 0),
+
+ MX6_PAD_SD1_DATA4__SD1_DATA4 = IOMUX_PAD(0x04AC, 0x01E4, 0, 0x0000, 0, 0),
+ MX6_PAD_SD1_DATA4__KEY_COL3 = IOMUX_PAD(0x04AC, 0x01E4, 2, 0x06AC, 2, 0),
+ MX6_PAD_SD1_DATA4__EPDC_SDCLK_N = IOMUX_PAD(0x04AC, 0x01E4, 3, 0x0000, 0, 0),
+ MX6_PAD_SD1_DATA4__UART4_DCE_RX = IOMUX_PAD(0x04AC, 0x01E4, 4, 0x075C, 6, 0),
+ MX6_PAD_SD1_DATA4__UART4_DTE_TX = IOMUX_PAD(0x04AC, 0x01E4, 4, 0x0000, 0, 0),
+ MX6_PAD_SD1_DATA4__GPIO5_IO12 = IOMUX_PAD(0x04AC, 0x01E4, 5, 0x0000, 0, 0),
+
+ MX6_PAD_SD1_DATA5__SD1_DATA5 = IOMUX_PAD(0x04B0, 0x01E8, 0, 0x0000, 0, 0),
+ MX6_PAD_SD1_DATA5__KEY_ROW3 = IOMUX_PAD(0x04B0, 0x01E8, 2, 0x06CC, 2, 0),
+ MX6_PAD_SD1_DATA5__EPDC_SDOED = IOMUX_PAD(0x04B0, 0x01E8, 3, 0x0000, 0, 0),
+ MX6_PAD_SD1_DATA5__UART4_DCE_TX = IOMUX_PAD(0x04B0, 0x01E8, 4, 0x0000, 0, 0),
+ MX6_PAD_SD1_DATA5__UART4_DTE_RX = IOMUX_PAD(0x04B0, 0x01E8, 4, 0x075C, 7, 0),
+ MX6_PAD_SD1_DATA5__GPIO5_IO09 = IOMUX_PAD(0x04B0, 0x01E8, 5, 0x0000, 0, 0),
+
+ MX6_PAD_SD1_DATA6__SD1_DATA6 = IOMUX_PAD(0x04B4, 0x01EC, 0, 0x0000, 0, 0),
+ MX6_PAD_SD1_DATA6__KEY_COL4 = IOMUX_PAD(0x04B4, 0x01EC, 2, 0x06B0, 2, 0),
+ MX6_PAD_SD1_DATA6__EPDC_SDOEZ = IOMUX_PAD(0x04B4, 0x01EC, 3, 0x0000, 0, 0),
+ MX6_PAD_SD1_DATA6__UART4_DCE_RTS = IOMUX_PAD(0x04B4, 0x01EC, 4, 0x0758, 4, 0),
+ MX6_PAD_SD1_DATA6__UART4_DTE_CTS = IOMUX_PAD(0x04B4, 0x01EC, 4, 0x0000, 0, 0),
+ MX6_PAD_SD1_DATA6__GPIO5_IO07 = IOMUX_PAD(0x04B4, 0x01EC, 5, 0x0000, 0, 0),
+
+ MX6_PAD_SD1_DATA7__SD1_DATA7 = IOMUX_PAD(0x04B8, 0x01F0, 0, 0x0000, 0, 0),
+ MX6_PAD_SD1_DATA7__KEY_ROW4 = IOMUX_PAD(0x04B8, 0x01F0, 2, 0x06D0, 2, 0),
+ MX6_PAD_SD1_DATA7__CCM_PMIC_READY = IOMUX_PAD(0x04B8, 0x01F0, 3, 0x05AC, 3, 0),
+ MX6_PAD_SD1_DATA7__UART4_DCE_CTS = IOMUX_PAD(0x04B8, 0x01F0, 4, 0x0000, 0, 0),
+ MX6_PAD_SD1_DATA7__UART4_DTE_RTS = IOMUX_PAD(0x04B8, 0x01F0, 4, 0x0758, 5, 0),
+ MX6_PAD_SD1_DATA7__GPIO5_IO10 = IOMUX_PAD(0x04B8, 0x01F0, 5, 0x0000, 0, 0),
+
+ MX6_PAD_SD2_RESET__SD2_RESET = IOMUX_PAD(0x04BC, 0x01F4, 0, 0x0000, 0, 0),
+ MX6_PAD_SD2_RESET__WDOG2_B = IOMUX_PAD(0x04BC, 0x01F4, 2, 0x0000, 0, 0),
+ MX6_PAD_SD2_RESET__SPDIF_OUT = IOMUX_PAD(0x04BC, 0x01F4, 3, 0x0000, 0, 0),
+ MX6_PAD_SD2_RESET__CSI_MCLK = IOMUX_PAD(0x04BC, 0x01F4, 4, 0x0000, 0, 0),
+ MX6_PAD_SD2_RESET__GPIO4_IO27 = IOMUX_PAD(0x04BC, 0x01F4, 5, 0x0000, 0, 0),
+
+ MX6_PAD_SD2_CLK__SD2_CLK = IOMUX_PAD(0x04C0, 0x01F8, 0, 0x0000, 0, 0),
+ MX6_PAD_SD2_CLK__AUD4_RXFS = IOMUX_PAD(0x04C0, 0x01F8, 1, 0x0570, 1, 0),
+ MX6_PAD_SD2_CLK__ECSPI3_SCLK = IOMUX_PAD(0x04C0, 0x01F8, 2, 0x0630, 1, 0),
+ MX6_PAD_SD2_CLK__CSI_DATA00 = IOMUX_PAD(0x04C0, 0x01F8, 3, 0x05C8, 1, 0),
+ MX6_PAD_SD2_CLK__GPIO5_IO05 = IOMUX_PAD(0x04C0, 0x01F8, 5, 0x0000, 0, 0),
+
+ MX6_PAD_SD2_CMD__SD2_CMD = IOMUX_PAD(0x04C4, 0x01FC, 0, 0x0000, 0, 0),
+ MX6_PAD_SD2_CMD__AUD4_RXC = IOMUX_PAD(0x04C4, 0x01FC, 1, 0x056C, 1, 0),
+ MX6_PAD_SD2_CMD__ECSPI3_SS0 = IOMUX_PAD(0x04C4, 0x01FC, 2, 0x0648, 1, 0),
+ MX6_PAD_SD2_CMD__CSI_DATA01 = IOMUX_PAD(0x04C4, 0x01FC, 3, 0x05CC, 1, 0),
+ MX6_PAD_SD2_CMD__EPIT1_OUT = IOMUX_PAD(0x04C4, 0x01FC, 4, 0x0000, 0, 0),
+ MX6_PAD_SD2_CMD__GPIO5_IO04 = IOMUX_PAD(0x04C4, 0x01FC, 5, 0x0000, 0, 0),
+
+ MX6_PAD_SD2_DATA0__SD2_DATA0 = IOMUX_PAD(0x04C8, 0x0200, 0, 0x0000, 0, 0),
+ MX6_PAD_SD2_DATA0__AUD4_RXD = IOMUX_PAD(0x04C8, 0x0200, 1, 0x0564, 2, 0),
+ MX6_PAD_SD2_DATA0__ECSPI3_MOSI = IOMUX_PAD(0x04C8, 0x0200, 2, 0x063C, 1, 0),
+ MX6_PAD_SD2_DATA0__CSI_DATA02 = IOMUX_PAD(0x04C8, 0x0200, 3, 0x05D0, 1, 0),
+ MX6_PAD_SD2_DATA0__UART5_DCE_RTS = IOMUX_PAD(0x04C8, 0x0200, 4, 0x0760, 4, 0),
+ MX6_PAD_SD2_DATA0__UART5_DTE_CTS = IOMUX_PAD(0x04C8, 0x0200, 4, 0x0000, 0, 0),
+ MX6_PAD_SD2_DATA0__GPIO5_IO01 = IOMUX_PAD(0x04C8, 0x0200, 5, 0x0000, 0, 0),
+
+ MX6_PAD_SD2_DATA1__SD2_DATA1 = IOMUX_PAD(0x04CC, 0x0204, 0, 0x0000, 0, 0),
+ MX6_PAD_SD2_DATA1__AUD4_TXC = IOMUX_PAD(0x04CC, 0x0204, 1, 0x0574, 2, 0),
+ MX6_PAD_SD2_DATA1__ECSPI3_MISO = IOMUX_PAD(0x04CC, 0x0204, 2, 0x0638, 1, 0),
+ MX6_PAD_SD2_DATA1__CSI_DATA03 = IOMUX_PAD(0x04CC, 0x0204, 3, 0x05D4, 1, 0),
+ MX6_PAD_SD2_DATA1__UART5_DCE_CTS = IOMUX_PAD(0x04CC, 0x0204, 4, 0x0000, 0, 0),
+ MX6_PAD_SD2_DATA1__UART5_DTE_RTS = IOMUX_PAD(0x04CC, 0x0204, 4, 0x0760, 5, 0),
+ MX6_PAD_SD2_DATA1__GPIO4_IO30 = IOMUX_PAD(0x04CC, 0x0204, 5, 0x0000, 0, 0),
+
+ MX6_PAD_SD2_DATA2__SD2_DATA2 = IOMUX_PAD(0x04D0, 0x0208, 0, 0x0000, 0, 0),
+ MX6_PAD_SD2_DATA2__AUD4_TXFS = IOMUX_PAD(0x04D0, 0x0208, 1, 0x0578, 2, 0),
+ MX6_PAD_SD2_DATA2__CSI_DATA04 = IOMUX_PAD(0x04D0, 0x0208, 3, 0x05D8, 1, 0),
+ MX6_PAD_SD2_DATA2__UART5_DCE_RX = IOMUX_PAD(0x04D0, 0x0208, 4, 0x0764, 4, 0),
+ MX6_PAD_SD2_DATA2__UART5_DTE_TX = IOMUX_PAD(0x04D0, 0x0208, 4, 0x0000, 0, 0),
+ MX6_PAD_SD2_DATA2__GPIO5_IO03 = IOMUX_PAD(0x04D0, 0x0208, 5, 0x0000, 0, 0),
+
+ MX6_PAD_SD2_DATA3__SD2_DATA3 = IOMUX_PAD(0x04D4, 0x020C, 0, 0x0000, 0, 0),
+ MX6_PAD_SD2_DATA3__AUD4_TXD = IOMUX_PAD(0x04D4, 0x020C, 1, 0x0568, 2, 0),
+ MX6_PAD_SD2_DATA3__CSI_DATA05 = IOMUX_PAD(0x04D4, 0x020C, 3, 0x05DC, 1, 0),
+ MX6_PAD_SD2_DATA3__UART5_DCE_TX = IOMUX_PAD(0x04D4, 0x020C, 4, 0x0000, 0, 0),
+ MX6_PAD_SD2_DATA3__UART5_DTE_RX = IOMUX_PAD(0x04D4, 0x020C, 4, 0x0764, 5, 0),
+ MX6_PAD_SD2_DATA3__GPIO4_IO28 = IOMUX_PAD(0x04D4, 0x020C, 5, 0x0000, 0, 0),
+
+ MX6_PAD_SD2_DATA4__SD2_DATA4 = IOMUX_PAD(0x04D8, 0x0210, 0, 0x0000, 0, 0),
+ MX6_PAD_SD2_DATA4__SD3_DATA4 = IOMUX_PAD(0x04D8, 0x0210, 1, 0x0784, 1, 0),
+ MX6_PAD_SD2_DATA4__UART2_DCE_RX = IOMUX_PAD(0x04D8, 0x0210, 2, 0x074C, 2, 0),
+ MX6_PAD_SD2_DATA4__UART2_DTE_TX = IOMUX_PAD(0x04D8, 0x0210, 2, 0x0000, 0, 0),
+ MX6_PAD_SD2_DATA4__CSI_DATA06 = IOMUX_PAD(0x04D8, 0x0210, 3, 0x05E0, 1, 0),
+ MX6_PAD_SD2_DATA4__SPDIF_OUT = IOMUX_PAD(0x04D8, 0x0210, 4, 0x0000, 0, 0),
+ MX6_PAD_SD2_DATA4__GPIO5_IO02 = IOMUX_PAD(0x04D8, 0x0210, 5, 0x0000, 0, 0),
+
+ MX6_PAD_SD2_DATA5__SD2_DATA5 = IOMUX_PAD(0x04DC, 0x0214, 0, 0x0000, 0, 0),
+ MX6_PAD_SD2_DATA5__SD3_DATA5 = IOMUX_PAD(0x04DC, 0x0214, 1, 0x0788, 1, 0),
+ MX6_PAD_SD2_DATA5__UART2_DCE_TX = IOMUX_PAD(0x04DC, 0x0214, 2, 0x0000, 0, 0),
+ MX6_PAD_SD2_DATA5__UART2_DTE_RX = IOMUX_PAD(0x04DC, 0x0214, 2, 0x074C, 3, 0),
+ MX6_PAD_SD2_DATA5__CSI_DATA07 = IOMUX_PAD(0x04DC, 0x0214, 3, 0x05E4, 1, 0),
+ MX6_PAD_SD2_DATA5__SPDIF_IN = IOMUX_PAD(0x04DC, 0x0214, 4, 0x0738, 1, 0),
+ MX6_PAD_SD2_DATA5__GPIO4_IO31 = IOMUX_PAD(0x04DC, 0x0214, 5, 0x0000, 0, 0),
+
+ MX6_PAD_SD2_DATA6__SD2_DATA6 = IOMUX_PAD(0x04E0, 0x0218, 0, 0x0000, 0, 0),
+ MX6_PAD_SD2_DATA6__SD3_DATA6 = IOMUX_PAD(0x04E0, 0x0218, 1, 0x078C, 1, 0),
+ MX6_PAD_SD2_DATA6__UART2_DCE_RTS = IOMUX_PAD(0x04E0, 0x0218, 2, 0x0748, 2, 0),
+ MX6_PAD_SD2_DATA6__UART2_DTE_CTS = IOMUX_PAD(0x04E0, 0x0218, 2, 0x0000, 0, 0),
+ MX6_PAD_SD2_DATA6__CSI_DATA08 = IOMUX_PAD(0x04E0, 0x0218, 3, 0x05E8, 1, 0),
+ MX6_PAD_SD2_DATA6__SD2_WP = IOMUX_PAD(0x04E0, 0x0218, 4, 0x077C, 1, 0),
+ MX6_PAD_SD2_DATA6__GPIO4_IO29 = IOMUX_PAD(0x04E0, 0x0218, 5, 0x0000, 0, 0),
+
+ MX6_PAD_SD2_DATA7__SD2_DATA7 = IOMUX_PAD(0x04E4, 0x021C, 0, 0x0000, 0, 0),
+ MX6_PAD_SD2_DATA7__SD3_DATA7 = IOMUX_PAD(0x04E4, 0x021C, 1, 0x0790, 1, 0),
+ MX6_PAD_SD2_DATA7__UART2_DCE_CTS = IOMUX_PAD(0x04E4, 0x021C, 2, 0x0000, 0, 0),
+ MX6_PAD_SD2_DATA7__UART2_DTE_RTS = IOMUX_PAD(0x04E4, 0x021C, 2, 0x0748, 3, 0),
+ MX6_PAD_SD2_DATA7__CSI_DATA09 = IOMUX_PAD(0x04E4, 0x021C, 3, 0x05EC, 1, 0),
+ MX6_PAD_SD2_DATA7__SD2_CD_B = IOMUX_PAD(0x04E4, 0x021C, 4, 0x0778, 1, 0),
+ MX6_PAD_SD2_DATA7__GPIO5_IO00 = IOMUX_PAD(0x04E4, 0x021C, 5, 0x0000, 0, 0),
+
+ MX6_PAD_SD3_CLK__SD3_CLK = IOMUX_PAD(0x04E8, 0x0220, 0, 0x0000, 0, 0),
+ MX6_PAD_SD3_CLK__AUD5_RXFS = IOMUX_PAD(0x04E8, 0x0220, 1, 0x0588, 0, 0),
+ MX6_PAD_SD3_CLK__KEY_COL5 = IOMUX_PAD(0x04E8, 0x0220, 2, 0x0694, 0, 0),
+ MX6_PAD_SD3_CLK__CSI_DATA10 = IOMUX_PAD(0x04E8, 0x0220, 3, 0x05B0, 0, 0),
+ MX6_PAD_SD3_CLK__WDOG1_RESET_B_DEB = IOMUX_PAD(0x04E8, 0x0220, 4, 0x0000, 0, 0),
+ MX6_PAD_SD3_CLK__GPIO5_IO18 = IOMUX_PAD(0x04E8, 0x0220, 5, 0x0000, 0, 0),
+ MX6_PAD_SD3_CLK__USB_OTG1_PWR = IOMUX_PAD(0x04E8, 0x0220, 6, 0x0000, 0, 0),
+
+ MX6_PAD_SD3_CMD__SD3_CMD = IOMUX_PAD(0x04EC, 0x0224, 0, 0x0000, 0, 0),
+ MX6_PAD_SD3_CMD__AUD5_RXC = IOMUX_PAD(0x04EC, 0x0224, 1, 0x0584, 0, 0),
+ MX6_PAD_SD3_CMD__KEY_ROW5 = IOMUX_PAD(0x04EC, 0x0224, 2, 0x06B4, 0, 0),
+ MX6_PAD_SD3_CMD__CSI_DATA11 = IOMUX_PAD(0x04EC, 0x0224, 3, 0x05B4, 0, 0),
+ MX6_PAD_SD3_CMD__USB_OTG2_ID = IOMUX_PAD(0x04EC, 0x0224, 4, 0x0560, 1, 0),
+ MX6_PAD_SD3_CMD__GPIO5_IO21 = IOMUX_PAD(0x04EC, 0x0224, 5, 0x0000, 0, 0),
+ MX6_PAD_SD3_CMD__USB_OTG2_PWR = IOMUX_PAD(0x04EC, 0x0224, 6, 0x0000, 0, 0),
+
+ MX6_PAD_SD3_DATA0__SD3_DATA0 = IOMUX_PAD(0x04F0, 0x0228, 0, 0x0000, 0, 0),
+ MX6_PAD_SD3_DATA0__AUD5_RXD = IOMUX_PAD(0x04F0, 0x0228, 1, 0x057C, 0, 0),
+ MX6_PAD_SD3_DATA0__KEY_COL6 = IOMUX_PAD(0x04F0, 0x0228, 2, 0x0698, 0, 0),
+ MX6_PAD_SD3_DATA0__CSI_DATA12 = IOMUX_PAD(0x04F0, 0x0228, 3, 0x05B8, 0, 0),
+ MX6_PAD_SD3_DATA0__USB_OTG1_ID = IOMUX_PAD(0x04F0, 0x0228, 4, 0x055C, 1, 0),
+ MX6_PAD_SD3_DATA0__GPIO5_IO19 = IOMUX_PAD(0x04F0, 0x0228, 5, 0x0000, 0, 0),
+
+ MX6_PAD_SD3_DATA1__SD3_DATA1 = IOMUX_PAD(0x04F4, 0x022C, 0, 0x0000, 0, 0),
+ MX6_PAD_SD3_DATA1__AUD5_TXC = IOMUX_PAD(0x04F4, 0x022C, 1, 0x058C, 0, 0),
+ MX6_PAD_SD3_DATA1__KEY_ROW6 = IOMUX_PAD(0x04F4, 0x022C, 2, 0x06B8, 0, 0),
+ MX6_PAD_SD3_DATA1__CSI_DATA13 = IOMUX_PAD(0x04F4, 0x022C, 3, 0x05BC, 0, 0),
+ MX6_PAD_SD3_DATA1__SD1_VSELECT = IOMUX_PAD(0x04F4, 0x022C, 4, 0x0000, 0, 0),
+ MX6_PAD_SD3_DATA1__GPIO5_IO20 = IOMUX_PAD(0x04F4, 0x022C, 5, 0x0000, 0, 0),
+ MX6_PAD_SD3_DATA1__JTAG_DE_B = IOMUX_PAD(0x04F4, 0x022C, 6, 0x0000, 0, 0),
+
+ MX6_PAD_SD3_DATA2__SD3_DATA2 = IOMUX_PAD(0x04F8, 0x0230, 0, 0x0000, 0, 0),
+ MX6_PAD_SD3_DATA2__AUD5_TXFS = IOMUX_PAD(0x04F8, 0x0230, 1, 0x0590, 0, 0),
+ MX6_PAD_SD3_DATA2__KEY_COL7 = IOMUX_PAD(0x04F8, 0x0230, 2, 0x069C, 0, 0),
+ MX6_PAD_SD3_DATA2__CSI_DATA14 = IOMUX_PAD(0x04F8, 0x0230, 3, 0x05C0, 0, 0),
+ MX6_PAD_SD3_DATA2__EPIT1_OUT = IOMUX_PAD(0x04F8, 0x0230, 4, 0x0000, 0, 0),
+ MX6_PAD_SD3_DATA2__GPIO5_IO16 = IOMUX_PAD(0x04F8, 0x0230, 5, 0x0000, 0, 0),
+ MX6_PAD_SD3_DATA2__USB_OTG2_OC = IOMUX_PAD(0x04F8, 0x0230, 6, 0x0768, 0, 0),
+
+ MX6_PAD_SD3_DATA3__SD3_DATA3 = IOMUX_PAD(0x04FC, 0x0234, 0, 0x0000, 0, 0),
+ MX6_PAD_SD3_DATA3__AUD5_TXD = IOMUX_PAD(0x04FC, 0x0234, 1, 0x0580, 0, 0),
+ MX6_PAD_SD3_DATA3__KEY_ROW7 = IOMUX_PAD(0x04FC, 0x0234, 2, 0x06BC, 0, 0),
+ MX6_PAD_SD3_DATA3__CSI_DATA15 = IOMUX_PAD(0x04FC, 0x0234, 3, 0x05C4, 0, 0),
+ MX6_PAD_SD3_DATA3__EPIT2_OUT = IOMUX_PAD(0x04FC, 0x0234, 4, 0x0000, 0, 0),
+ MX6_PAD_SD3_DATA3__GPIO5_IO17 = IOMUX_PAD(0x04FC, 0x0234, 5, 0x0000, 0, 0),
+ MX6_PAD_SD3_DATA3__USB_OTG1_OC = IOMUX_PAD(0x04FC, 0x0234, 6, 0x076C, 0, 0),
+
+ MX6_PAD_GPIO4_IO20__SD1_STROBE = IOMUX_PAD(0x0500, 0x0238, 0, 0x0000, 0, 0),
+ MX6_PAD_GPIO4_IO20__AUD6_RXFS = IOMUX_PAD(0x0500, 0x0238, 2, 0x05A0, 0, 0),
+ MX6_PAD_GPIO4_IO20__ECSPI4_SS0 = IOMUX_PAD(0x0500, 0x0238, 3, 0x065C, 0, 0),
+ MX6_PAD_GPIO4_IO20__GPT_CAPTURE1 = IOMUX_PAD(0x0500, 0x0238, 4, 0x0670, 0, 0),
+ MX6_PAD_GPIO4_IO20__GPIO4_IO20 = IOMUX_PAD(0x0500, 0x0238, 5, 0x0000, 0, 0),
+
+ MX6_PAD_GPIO4_IO21__SD2_STROBE = IOMUX_PAD(0x0504, 0x023C, 0, 0x0000, 0, 0),
+ MX6_PAD_GPIO4_IO21__AUD6_RXC = IOMUX_PAD(0x0504, 0x023C, 2, 0x059C, 0, 0),
+ MX6_PAD_GPIO4_IO21__ECSPI4_SCLK = IOMUX_PAD(0x0504, 0x023C, 3, 0x0650, 0, 0),
+ MX6_PAD_GPIO4_IO21__GPT_CAPTURE2 = IOMUX_PAD(0x0504, 0x023C, 4, 0x0674, 0, 0),
+ MX6_PAD_GPIO4_IO21__GPIO4_IO21 = IOMUX_PAD(0x0504, 0x023C, 5, 0x0000, 0, 0),
+
+ MX6_PAD_GPIO4_IO19__SD3_STROBE = IOMUX_PAD(0x0508, 0x0240, 0, 0x0000, 0, 0),
+ MX6_PAD_GPIO4_IO19__AUD6_RXD = IOMUX_PAD(0x0508, 0x0240, 2, 0x0594, 0, 0),
+ MX6_PAD_GPIO4_IO19__ECSPI4_MOSI = IOMUX_PAD(0x0508, 0x0240, 3, 0x0658, 0, 0),
+ MX6_PAD_GPIO4_IO19__GPT_COMPARE1 = IOMUX_PAD(0x0508, 0x0240, 4, 0x0000, 0, 0),
+ MX6_PAD_GPIO4_IO19__GPIO4_IO19 = IOMUX_PAD(0x0508, 0x0240, 5, 0x0000, 0, 0),
+ MX6_PAD_GPIO4_IO25__AUD6_TXC = IOMUX_PAD(0x050C, 0x0244, 2, 0x05A4, 0, 0),
+ MX6_PAD_GPIO4_IO25__ECSPI4_MISO = IOMUX_PAD(0x050C, 0x0244, 3, 0x0654, 0, 0),
+ MX6_PAD_GPIO4_IO25__GPT_COMPARE2 = IOMUX_PAD(0x050C, 0x0244, 4, 0x0000, 0, 0),
+ MX6_PAD_GPIO4_IO25__GPIO4_IO25 = IOMUX_PAD(0x050C, 0x0244, 5, 0x0000, 0, 0),
+ MX6_PAD_GPIO4_IO18__AUD6_TXFS = IOMUX_PAD(0x0510, 0x0248, 2, 0x05A8, 0, 0),
+ MX6_PAD_GPIO4_IO18__ECSPI4_SS1 = IOMUX_PAD(0x0510, 0x0248, 3, 0x0660, 0, 0),
+ MX6_PAD_GPIO4_IO18__GPT_COMPARE3 = IOMUX_PAD(0x0510, 0x0248, 4, 0x0000, 0, 0),
+ MX6_PAD_GPIO4_IO18__GPIO4_IO18 = IOMUX_PAD(0x0510, 0x0248, 5, 0x0000, 0, 0),
+ MX6_PAD_GPIO4_IO24__AUD6_TXD = IOMUX_PAD(0x0514, 0x024C, 2, 0x0598, 0, 0),
+ MX6_PAD_GPIO4_IO24__ECSPI4_SS2 = IOMUX_PAD(0x0514, 0x024C, 3, 0x0664, 0, 0),
+ MX6_PAD_GPIO4_IO24__GPT_CLKIN = IOMUX_PAD(0x0514, 0x024C, 4, 0x0678, 0, 0),
+ MX6_PAD_GPIO4_IO24__GPIO4_IO24 = IOMUX_PAD(0x0514, 0x024C, 5, 0x0000, 0, 0),
+ MX6_PAD_GPIO4_IO23__AUDIO_CLK_OUT = IOMUX_PAD(0x0518, 0x0250, 2, 0x0000, 0, 0),
+ MX6_PAD_GPIO4_IO23__SD1_RESET = IOMUX_PAD(0x0518, 0x0250, 3, 0x0000, 0, 0),
+ MX6_PAD_GPIO4_IO23__SD3_RESET = IOMUX_PAD(0x0518, 0x0250, 4, 0x0000, 0, 0),
+ MX6_PAD_GPIO4_IO23__GPIO4_IO23 = IOMUX_PAD(0x0518, 0x0250, 5, 0x0000, 0, 0),
+ MX6_PAD_GPIO4_IO17__USB_OTG1_ID = IOMUX_PAD(0x051C, 0x0254, 2, 0x055C, 2, 0),
+ MX6_PAD_GPIO4_IO17__SD1_VSELECT = IOMUX_PAD(0x051C, 0x0254, 3, 0x0000, 0, 0),
+ MX6_PAD_GPIO4_IO17__SD3_VSELECT = IOMUX_PAD(0x051C, 0x0254, 4, 0x0000, 0, 0),
+ MX6_PAD_GPIO4_IO17__GPIO4_IO17 = IOMUX_PAD(0x051C, 0x0254, 5, 0x0000, 0, 0),
+ MX6_PAD_GPIO4_IO22__SPDIF_IN = IOMUX_PAD(0x0520, 0x0258, 2, 0x0738, 0, 0),
+ MX6_PAD_GPIO4_IO22__SD1_WP = IOMUX_PAD(0x0520, 0x0258, 3, 0x0774, 0, 0),
+ MX6_PAD_GPIO4_IO22__SD3_WP = IOMUX_PAD(0x0520, 0x0258, 4, 0x0794, 1, 0),
+ MX6_PAD_GPIO4_IO22__GPIO4_IO22 = IOMUX_PAD(0x0520, 0x0258, 5, 0x0000, 0, 0),
+ MX6_PAD_GPIO4_IO16__SPDIF_OUT = IOMUX_PAD(0x0524, 0x025C, 2, 0x0000, 0, 0),
+ MX6_PAD_GPIO4_IO16__SD1_CD_B = IOMUX_PAD(0x0524, 0x025C, 3, 0x0770, 0, 0),
+ MX6_PAD_GPIO4_IO16__SD3_CD_B = IOMUX_PAD(0x0524, 0x025C, 4, 0x0780, 1, 0),
+ MX6_PAD_GPIO4_IO16__GPIO4_IO16 = IOMUX_PAD(0x0524, 0x025C, 5, 0x0000, 0, 0),
+ MX6_PAD_GPIO4_IO26__WDOG1_B = IOMUX_PAD(0x0528, 0x0260, 2, 0x0000, 0, 0),
+ MX6_PAD_GPIO4_IO26__PWM4_OUT = IOMUX_PAD(0x0528, 0x0260, 3, 0x0000, 0, 0),
+ MX6_PAD_GPIO4_IO26__CCM_PMIC_READY = IOMUX_PAD(0x0528, 0x0260, 4, 0x05AC, 1, 0),
+ MX6_PAD_GPIO4_IO26__GPIO4_IO26 = IOMUX_PAD(0x0528, 0x0260, 5, 0x0000, 0, 0),
+ MX6_PAD_GPIO4_IO26__SPDIF_EXT_CLK = IOMUX_PAD(0x0528, 0x0260, 6, 0x073C, 0, 0),
+};
+#endif /* __ASM_ARCH_IMX6SLL_PINS_H__ */
diff --git a/arch/arm/include/asm/arch-zynqmp/hardware.h b/arch/arm/include/asm/arch-zynqmp/hardware.h
index 5908c50..041b43c 100644
--- a/arch/arm/include/asm/arch-zynqmp/hardware.h
+++ b/arch/arm/include/asm/arch-zynqmp/hardware.h
@@ -18,8 +18,6 @@
#define ARASAN_NAND_BASEADDR 0xFF100000
-#define ZYNQMP_SATA_BASEADDR 0xFD0C0000
-
#define ZYNQMP_USB0_XHCI_BASEADDR 0xFE200000
#define ZYNQMP_USB1_XHCI_BASEADDR 0xFE300000
diff --git a/arch/arm/include/asm/imx-common/iomux-v3.h b/arch/arm/include/asm/imx-common/iomux-v3.h
index b3af696..7587cbb 100644
--- a/arch/arm/include/asm/imx-common/iomux-v3.h
+++ b/arch/arm/include/asm/imx-common/iomux-v3.h
@@ -144,10 +144,12 @@
#define PAD_CTL_DSE_40ohm (6 << 3)
#define PAD_CTL_DSE_34ohm (7 << 3)
-#if defined CONFIG_MX6SL
+/* i.MX6SL/SLL */
#define PAD_CTL_LVE (1 << 1)
#define PAD_CTL_LVE_BIT (1 << 22)
-#endif
+
+/* i.MX6SLL */
+#define PAD_CTL_IPD_BIT (1 << 27)
#elif defined(CONFIG_VF610)
diff --git a/arch/arm/include/asm/imx-common/regs-lcdif.h b/arch/arm/include/asm/imx-common/regs-lcdif.h
index 5a4f61f..ab147b5 100644
--- a/arch/arm/include/asm/imx-common/regs-lcdif.h
+++ b/arch/arm/include/asm/imx-common/regs-lcdif.h
@@ -20,7 +20,7 @@
mxs_reg_32(hw_lcdif_ctrl) /* 0x00 */
mxs_reg_32(hw_lcdif_ctrl1) /* 0x10 */
#if defined(CONFIG_MX28) || defined(CONFIG_MX6SX) || defined(CONFIG_MX6UL) || \
- defined(CONFIG_MX7)
+ defined(CONFIG_MX7) || defined(CONFIG_MX6SL) || defined(CONFIG_MX6SLL)
mxs_reg_32(hw_lcdif_ctrl2) /* 0x20 */
#endif
mxs_reg_32(hw_lcdif_transfer_count) /* 0x20/0x30 */
@@ -56,7 +56,7 @@
mxs_reg_32(hw_lcdif_data) /* 0x1b0/0x180 */
mxs_reg_32(hw_lcdif_bm_error_stat) /* 0x1c0/0x190 */
#if defined(CONFIG_MX28) || defined(CONFIG_MX6SX) || defined(CONFIG_MX6UL) || \
- defined(CONFIG_MX7)
+ defined(CONFIG_MX7) || defined(CONFIG_MX6SL) || defined(CONFIG_MX6SLL)
mxs_reg_32(hw_lcdif_crc_stat) /* 0x1a0 */
#endif
mxs_reg_32(hw_lcdif_lcdif_stat) /* 0x1d0/0x1b0 */
@@ -64,7 +64,8 @@
mxs_reg_32(hw_lcdif_debug0) /* 0x1f0/0x1d0 */
mxs_reg_32(hw_lcdif_debug1) /* 0x200/0x1e0 */
mxs_reg_32(hw_lcdif_debug2) /* 0x1f0 */
-#if defined(CONFIG_MX6SX) || defined(CONFIG_MX6UL) || defined(CONFIG_MX7)
+#if defined(CONFIG_MX6SX) || defined(CONFIG_MX6UL) || defined(CONFIG_MX7) || \
+ defined(CONFIG_MX6SL) || defined(CONFIG_MX6SLL)
mxs_reg_32(hw_lcdif_thres)
mxs_reg_32(hw_lcdif_as_ctrl)
mxs_reg_32(hw_lcdif_as_buf)
diff --git a/arch/arm/include/asm/imx-common/sys_proto.h b/arch/arm/include/asm/imx-common/sys_proto.h
index 005435a..539d34b 100644
--- a/arch/arm/include/asm/imx-common/sys_proto.h
+++ b/arch/arm/include/asm/imx-common/sys_proto.h
@@ -36,6 +36,7 @@
#define is_mx6solo() (is_cpu_type(MXC_CPU_MX6SOLO))
#define is_mx6ul() (is_cpu_type(MXC_CPU_MX6UL))
#define is_mx6ull() (is_cpu_type(MXC_CPU_MX6ULL))
+#define is_mx6sll() (is_cpu_type(MXC_CPU_MX6SLL))
u32 get_nr_cpus(void);
u32 get_cpu_rev(void);
diff --git a/arch/arm/mach-litesom/Kconfig b/arch/arm/mach-litesom/Kconfig
new file mode 100644
index 0000000..9b7f36d
--- /dev/null
+++ b/arch/arm/mach-litesom/Kconfig
@@ -0,0 +1,6 @@
+config LITESOM
+ bool
+ select MX6UL
+ select DM
+ select DM_THERMAL
+ select SUPPORT_SPL
diff --git a/arch/arm/mach-litesom/Makefile b/arch/arm/mach-litesom/Makefile
new file mode 100644
index 0000000..b15eb64
--- /dev/null
+++ b/arch/arm/mach-litesom/Makefile
@@ -0,0 +1,6 @@
+# (C) Copyright 2016 Grinn
+#
+# SPDX-License-Identifier: GPL-2.0+
+#
+
+obj-y := litesom.o
diff --git a/arch/arm/mach-litesom/include/mach/litesom.h b/arch/arm/mach-litesom/include/mach/litesom.h
new file mode 100644
index 0000000..6833949
--- /dev/null
+++ b/arch/arm/mach-litesom/include/mach/litesom.h
@@ -0,0 +1,16 @@
+/*
+ * Copyright (C) 2016 Grinn
+ *
+ * SPDX-License-Identifier: GPL-2.0+
+ */
+
+#ifndef __ARCH_ARM_MACH_LITESOM_SOM_H__
+#define __ARCH_ARM_MACH_LITESOM_SOM_H__
+
+int litesom_mmc_init(bd_t *bis);
+
+#ifdef CONFIG_SPL_BUILD
+void litesom_init_f(void);
+#endif
+
+#endif
diff --git a/arch/arm/mach-litesom/litesom.c b/arch/arm/mach-litesom/litesom.c
new file mode 100644
index 0000000..ac2eccf
--- /dev/null
+++ b/arch/arm/mach-litesom/litesom.c
@@ -0,0 +1,200 @@
+/*
+ * Copyright (C) 2015-2016 Freescale Semiconductor, Inc.
+ * Copyright (C) 2016 Grinn
+ *
+ * SPDX-License-Identifier: GPL-2.0+
+ */
+
+#include <asm/arch/clock.h>
+#include <asm/arch/iomux.h>
+#include <asm/arch/imx-regs.h>
+#include <asm/arch/crm_regs.h>
+#include <asm/arch/mx6ul_pins.h>
+#include <asm/arch/mx6-pins.h>
+#include <asm/arch/sys_proto.h>
+#include <asm/gpio.h>
+#include <asm/imx-common/iomux-v3.h>
+#include <asm/imx-common/boot_mode.h>
+#include <asm/io.h>
+#include <common.h>
+#include <fsl_esdhc.h>
+#include <linux/sizes.h>
+#include <mmc.h>
+
+DECLARE_GLOBAL_DATA_PTR;
+
+#define USDHC_PAD_CTRL (PAD_CTL_PKE | PAD_CTL_PUE | \
+ PAD_CTL_PUS_22K_UP | PAD_CTL_SPEED_LOW | \
+ PAD_CTL_DSE_80ohm | PAD_CTL_SRE_FAST | PAD_CTL_HYS)
+
+int dram_init(void)
+{
+ gd->ram_size = imx_ddr_size();
+
+ return 0;
+}
+
+static iomux_v3_cfg_t const emmc_pads[] = {
+ MX6_PAD_NAND_RE_B__USDHC2_CLK | MUX_PAD_CTRL(USDHC_PAD_CTRL),
+ MX6_PAD_NAND_WE_B__USDHC2_CMD | MUX_PAD_CTRL(USDHC_PAD_CTRL),
+ MX6_PAD_NAND_DATA00__USDHC2_DATA0 | MUX_PAD_CTRL(USDHC_PAD_CTRL),
+ MX6_PAD_NAND_DATA01__USDHC2_DATA1 | MUX_PAD_CTRL(USDHC_PAD_CTRL),
+ MX6_PAD_NAND_DATA02__USDHC2_DATA2 | MUX_PAD_CTRL(USDHC_PAD_CTRL),
+ MX6_PAD_NAND_DATA03__USDHC2_DATA3 | MUX_PAD_CTRL(USDHC_PAD_CTRL),
+ MX6_PAD_NAND_DATA04__USDHC2_DATA4 | MUX_PAD_CTRL(USDHC_PAD_CTRL),
+ MX6_PAD_NAND_DATA05__USDHC2_DATA5 | MUX_PAD_CTRL(USDHC_PAD_CTRL),
+ MX6_PAD_NAND_DATA06__USDHC2_DATA6 | MUX_PAD_CTRL(USDHC_PAD_CTRL),
+ MX6_PAD_NAND_DATA07__USDHC2_DATA7 | MUX_PAD_CTRL(USDHC_PAD_CTRL),
+
+ /* RST_B */
+ MX6_PAD_NAND_ALE__GPIO4_IO10 | MUX_PAD_CTRL(NO_PAD_CTRL),
+};
+
+#ifdef CONFIG_FSL_ESDHC
+static struct fsl_esdhc_cfg emmc_cfg = {USDHC2_BASE_ADDR, 0, 8};
+
+#define EMMC_PWR_GPIO IMX_GPIO_NR(4, 10)
+
+int litesom_mmc_init(bd_t *bis)
+{
+ int ret;
+
+ /* eMMC */
+ imx_iomux_v3_setup_multiple_pads(emmc_pads, ARRAY_SIZE(emmc_pads));
+ gpio_direction_output(EMMC_PWR_GPIO, 0);
+ udelay(500);
+ gpio_direction_output(EMMC_PWR_GPIO, 1);
+ emmc_cfg.sdhc_clk = mxc_get_clock(MXC_ESDHC2_CLK);
+
+ ret = fsl_esdhc_initialize(bis, &emmc_cfg);
+ if (ret) {
+ printf("Warning: failed to initialize mmc dev 1 (eMMC)\n");
+ return ret;
+ }
+
+ return 0;
+}
+#endif
+
+#ifdef CONFIG_SPL_BUILD
+#include <libfdt.h>
+#include <spl.h>
+#include <asm/arch/mx6-ddr.h>
+
+
+static struct mx6ul_iomux_grp_regs mx6_grp_ioregs = {
+ .grp_addds = 0x00000030,
+ .grp_ddrmode_ctl = 0x00020000,
+ .grp_b0ds = 0x00000030,
+ .grp_ctlds = 0x00000030,
+ .grp_b1ds = 0x00000030,
+ .grp_ddrpke = 0x00000000,
+ .grp_ddrmode = 0x00020000,
+ .grp_ddr_type = 0x000c0000,
+};
+
+static struct mx6ul_iomux_ddr_regs mx6_ddr_ioregs = {
+ .dram_dqm0 = 0x00000030,
+ .dram_dqm1 = 0x00000030,
+ .dram_ras = 0x00000030,
+ .dram_cas = 0x00000030,
+ .dram_odt0 = 0x00000030,
+ .dram_odt1 = 0x00000030,
+ .dram_sdba2 = 0x00000000,
+ .dram_sdclk_0 = 0x00000030,
+ .dram_sdqs0 = 0x00000030,
+ .dram_sdqs1 = 0x00000030,
+ .dram_reset = 0x00000030,
+};
+
+static struct mx6_mmdc_calibration mx6_mmcd_calib = {
+ .p0_mpwldectrl0 = 0x00000000,
+ .p0_mpdgctrl0 = 0x41570155,
+ .p0_mprddlctl = 0x4040474A,
+ .p0_mpwrdlctl = 0x40405550,
+};
+
+struct mx6_ddr_sysinfo ddr_sysinfo = {
+ .dsize = 0,
+ .cs_density = 20,
+ .ncs = 1,
+ .cs1_mirror = 0,
+ .rtt_wr = 2,
+ .rtt_nom = 1, /* RTT_Nom = RZQ/2 */
+ .walat = 0, /* Write additional latency */
+ .ralat = 5, /* Read additional latency */
+ .mif3_mode = 3, /* Command prediction working mode */
+ .bi_on = 1, /* Bank interleaving enabled */
+ .sde_to_rst = 0x10, /* 14 cycles, 200us (JEDEC default) */
+ .rst_to_cke = 0x23, /* 33 cycles, 500us (JEDEC default) */
+ .ddr_type = DDR_TYPE_DDR3,
+ .refsel = 0, /* Refresh cycles at 64KHz */
+ .refr = 1, /* 2 refresh commands per refresh cycle */
+};
+
+static struct mx6_ddr3_cfg mem_ddr = {
+ .mem_speed = 800,
+ .density = 4,
+ .width = 16,
+ .banks = 8,
+ .rowaddr = 15,
+ .coladdr = 10,
+ .pagesz = 2,
+ .trcd = 1375,
+ .trcmin = 4875,
+ .trasmin = 3500,
+};
+
+static void ccgr_init(void)
+{
+ struct mxc_ccm_reg *ccm = (struct mxc_ccm_reg *)CCM_BASE_ADDR;
+
+ writel(0xFFFFFFFF, &ccm->CCGR0);
+ writel(0xFFFFFFFF, &ccm->CCGR1);
+ writel(0xFFFFFFFF, &ccm->CCGR2);
+ writel(0xFFFFFFFF, &ccm->CCGR3);
+ writel(0xFFFFFFFF, &ccm->CCGR4);
+ writel(0xFFFFFFFF, &ccm->CCGR5);
+ writel(0xFFFFFFFF, &ccm->CCGR6);
+ writel(0xFFFFFFFF, &ccm->CCGR7);
+}
+
+static void spl_dram_init(void)
+{
+ unsigned long ram_size;
+
+ mx6ul_dram_iocfg(mem_ddr.width, &mx6_ddr_ioregs, &mx6_grp_ioregs);
+ mx6_dram_cfg(&ddr_sysinfo, &mx6_mmcd_calib, &mem_ddr);
+
+ /*
+ * Get actual RAM size, so we can adjust DDR row size for <512M
+ * memories
+ */
+ ram_size = get_ram_size((void *)CONFIG_SYS_SDRAM_BASE, SZ_512M);
+ if (ram_size < SZ_512M) {
+ mem_ddr.rowaddr = 14;
+ mx6_dram_cfg(&ddr_sysinfo, &mx6_mmcd_calib, &mem_ddr);
+ }
+}
+
+void litesom_init_f(void)
+{
+ ccgr_init();
+
+ /* setup AIPS and disable watchdog */
+ arch_cpu_init();
+
+#ifdef CONFIG_BOARD_EARLY_INIT_F
+ board_early_init_f();
+#endif
+
+ /* setup GP timer */
+ timer_init();
+
+ /* UART clocks enabled and gd valid - init serial console */
+ preloader_console_init();
+
+ /* DDR initialization */
+ spl_dram_init();
+}
+#endif
diff --git a/arch/x86/dts/emulation-u-boot.dtsi b/arch/x86/dts/emulation-u-boot.dtsi
new file mode 100644
index 0000000..56d34af
--- /dev/null
+++ b/arch/x86/dts/emulation-u-boot.dtsi
@@ -0,0 +1,18 @@
+/*
+ * Copyright (C) 2016 Google, Inc
+ * Written by Simon Glass <sjg@chromium.org>
+ *
+ * SPDX-License-Identifier: GPL-2.0+
+ */
+
+#include <u-boot.dtsi>
+
+#ifdef CONFIG_ROM_SIZE
+/ {
+ binman {
+ u-boot-with-ucode-ptr {
+ optional-ucode;
+ };
+ };
+};
+#endif
diff --git a/arch/x86/dts/u-boot.dtsi b/arch/x86/dts/u-boot.dtsi
new file mode 100644
index 0000000..724913f
--- /dev/null
+++ b/arch/x86/dts/u-boot.dtsi
@@ -0,0 +1,62 @@
+/*
+ * Copyright (C) 2016 Google, Inc
+ * Written by Simon Glass <sjg@chromium.org>
+ *
+ * SPDX-License-Identifier: GPL-2.0+
+ */
+
+#include <config.h>
+
+#ifdef CONFIG_ROM_SIZE
+/ {
+ binman {
+ filename = "u-boot.rom";
+ end-at-4gb;
+ sort-by-pos;
+ pad-byte = <0xff>;
+ size = <CONFIG_ROM_SIZE>;
+#ifdef CONFIG_HAVE_INTEL_ME
+ intel-descriptor {
+ };
+ intel-me {
+ };
+#endif
+ u-boot-with-ucode-ptr {
+ pos = <CONFIG_SYS_TEXT_BASE>;
+ };
+ u-boot-dtb-with-ucode {
+ };
+ u-boot-ucode {
+ align = <16>;
+ };
+#ifdef CONFIG_HAVE_MRC
+ intel-mrc {
+ pos = <CONFIG_X86_MRC_ADDR>;
+ };
+#endif
+#ifdef CONFIG_HAVE_FSP
+ intel-fsp {
+ pos = <CONFIG_FSP_ADDR>;
+ };
+#endif
+#ifdef CONFIG_HAVE_CMC
+ intel-cmc {
+ pos = <CONFIG_CMC_ADDR>;
+ };
+#endif
+#ifdef CONFIG_HAVE_VGA_BIOS
+ intel-vga {
+ pos = <CONFIG_VGA_BIOS_ADDR>;
+ };
+#endif
+#ifdef CONFIG_HAVE_REFCODE
+ intel-refcode {
+ pos = <CONFIG_X86_REFCODE_ADDR>;
+ };
+#endif
+ x86-start16 {
+ pos = <CONFIG_SYS_X86_START16>;
+ };
+ };
+};
+#endif
diff --git a/board/beckhoff/mx53cx9020/Kconfig b/board/beckhoff/mx53cx9020/Kconfig
new file mode 100644
index 0000000..dcdafb6
--- /dev/null
+++ b/board/beckhoff/mx53cx9020/Kconfig
@@ -0,0 +1,12 @@
+if TARGET_MX53CX9020
+
+config SYS_BOARD
+ default "mx53cx9020"
+
+config SYS_VENDOR
+ default "beckhoff"
+
+config SYS_CONFIG_NAME
+ default "mx53cx9020"
+
+endif
diff --git a/board/beckhoff/mx53cx9020/MAINTAINERS b/board/beckhoff/mx53cx9020/MAINTAINERS
new file mode 100644
index 0000000..f84413e
--- /dev/null
+++ b/board/beckhoff/mx53cx9020/MAINTAINERS
@@ -0,0 +1,6 @@
+MX53 CX9020
+M: Patrick Bruenn <p.bruenn@beckhoff.com>
+S: Maintained
+F: board/beckhoff/mx53cx9020/
+F: include/configs/mx53cx9020.h
+F: configs/mx53cx9020_defconfig
diff --git a/board/beckhoff/mx53cx9020/Makefile b/board/beckhoff/mx53cx9020/Makefile
new file mode 100644
index 0000000..a01c0f1
--- /dev/null
+++ b/board/beckhoff/mx53cx9020/Makefile
@@ -0,0 +1,9 @@
+#
+# Copyright (C) 2015 Beckhoff Automation GmbH & Co. KG
+# Patrick Bruenn <p.bruenn@beckhoff.com>
+#
+# SPDX-License-Identifier: GPL-2.0+
+#
+
+obj-y += mx53cx9020.o
+obj-$(CONFIG_VIDEO) += mx53cx9020_video.o
diff --git a/board/beckhoff/mx53cx9020/imximage.cfg b/board/beckhoff/mx53cx9020/imximage.cfg
new file mode 100644
index 0000000..a11d04c
--- /dev/null
+++ b/board/beckhoff/mx53cx9020/imximage.cfg
@@ -0,0 +1,82 @@
+/*
+ * Copyright (C) 2015 Beckhoff Automation GmbH
+ * Patrick Bruenn <p.bruenn@beckhoff.com>
+ *
+ * Based on <u-boot>/board/freescale/mx53loco/imximage.cfg
+ * Copyright (C) 2011 Freescale Semiconductor, Inc.
+ *
+ * SPDX-License-Identifier: GPL-2.0+
+ */
+
+/* image version */
+IMAGE_VERSION 2
+
+/*
+ * Boot Device : one of
+ * spi, sd (the board has no nand neither onenand)
+ */
+BOOT_FROM sd
+
+/*
+ * Device Configuration Data (DCD)
+ *
+ * Each entry must have the format:
+ * Addr-type Address Value
+ *
+ * where:
+ * Addr-type register length (1,2 or 4 bytes)
+ * Address absolute address of the register
+ * value value to be stored in the register
+ */
+DATA 4 0x53fa8554 0x00300000
+DATA 4 0x53fa8558 0x00300040
+DATA 4 0x53fa8560 0x00300000
+DATA 4 0x53fa8564 0x00300040
+DATA 4 0x53fa8568 0x00300040
+DATA 4 0x53fa8570 0x00300000
+DATA 4 0x53fa8574 0x00300000
+DATA 4 0x53fa8578 0x00300000
+DATA 4 0x53fa857c 0x00300040
+DATA 4 0x53fa8580 0x00300040
+DATA 4 0x53fa8584 0x00300000
+DATA 4 0x53fa8588 0x00300000
+DATA 4 0x53fa8590 0x00300040
+DATA 4 0x53fa8594 0x00300000
+DATA 4 0x53fa86f0 0x00300000
+DATA 4 0x53fa86f4 0x00000000
+DATA 4 0x53fa86fc 0x00000000
+DATA 4 0x53fa8714 0x00000000
+DATA 4 0x53fa8718 0x00300000
+DATA 4 0x53fa871c 0x00300000
+DATA 4 0x53fa8720 0x00300000
+DATA 4 0x53fa8724 0x00000000
+DATA 4 0x53fa8728 0x00300000
+DATA 4 0x53fa872c 0x00300000
+DATA 4 0x63fd9088 0x35343535
+DATA 4 0x63fd9090 0x4d444c44
+DATA 4 0x63fd907c 0x01370138
+DATA 4 0x63fd9080 0x013b013c
+DATA 4 0x63fd9018 0x00011740
+DATA 4 0x63fd9000 0x83190000
+DATA 4 0x63fd900c 0x40425333
+DATA 4 0x63fd9010 0xb68e8a63
+DATA 4 0x63fd9014 0x01ff00db
+DATA 4 0x63fd902c 0x000026d2
+DATA 4 0x63fd9030 0x009f0e21
+DATA 4 0x63fd9008 0x12273030
+DATA 4 0x63fd9004 0x0002002d
+DATA 4 0x63fd901c 0x00008032
+DATA 4 0x63fd901c 0x00008033
+DATA 4 0x63fd901c 0x00028031
+DATA 4 0x63fd901c 0x052080b0
+DATA 4 0x63fd901c 0x04008040
+DATA 4 0x63fd9000 0xc3190000
+DATA 4 0x63fd901c 0x0000803a
+DATA 4 0x63fd901c 0x0000803b
+DATA 4 0x63fd901c 0x00028039
+DATA 4 0x63fd901c 0x05208138
+DATA 4 0x63fd901c 0x04008048
+DATA 4 0x63fd9020 0x00005800
+DATA 4 0x63fd9040 0x05380003
+DATA 4 0x63fd9058 0x00022227
+DATA 4 0x63fd901c 0x00000000
diff --git a/board/beckhoff/mx53cx9020/mx53cx9020.c b/board/beckhoff/mx53cx9020/mx53cx9020.c
new file mode 100644
index 0000000..9b3ac22
--- /dev/null
+++ b/board/beckhoff/mx53cx9020/mx53cx9020.c
@@ -0,0 +1,367 @@
+/*
+ * Copyright (C) 2015 Beckhoff Automation GmbH & Co. KG
+ * Patrick Bruenn <p.bruenn@beckhoff.com>
+ *
+ * Based on <u-boot>/board/freescale/mx53loco/mx53loco.c
+ * Copyright (C) 2011 Freescale Semiconductor, Inc.
+ *
+ * SPDX-License-Identifier: GPL-2.0+
+ */
+
+#include <common.h>
+#include <asm/io.h>
+#include <asm/arch/imx-regs.h>
+#include <asm/arch/sys_proto.h>
+#include <asm/arch/crm_regs.h>
+#include <asm/arch/clock.h>
+#include <asm/arch/iomux-mx53.h>
+#include <asm/arch/clock.h>
+#include <asm/imx-common/mx5_video.h>
+#include <ACEX1K.h>
+#include <netdev.h>
+#include <i2c.h>
+#include <mmc.h>
+#include <fsl_esdhc.h>
+#include <asm/gpio.h>
+#include <linux/fb.h>
+#include <ipu_pixfmt.h>
+#include <fs.h>
+#include <dm/platdata.h>
+#include <dm/platform_data/serial_mxc.h>
+
+enum LED_GPIOS {
+ GPIO_SD1_CD = IMX_GPIO_NR(1, 1),
+ GPIO_SD2_CD = IMX_GPIO_NR(1, 4),
+ GPIO_LED_SD2_R = IMX_GPIO_NR(3, 16),
+ GPIO_LED_SD2_B = IMX_GPIO_NR(3, 17),
+ GPIO_LED_SD2_G = IMX_GPIO_NR(3, 18),
+ GPIO_LED_SD1_R = IMX_GPIO_NR(3, 19),
+ GPIO_LED_SD1_B = IMX_GPIO_NR(3, 20),
+ GPIO_LED_SD1_G = IMX_GPIO_NR(3, 21),
+ GPIO_LED_PWR_R = IMX_GPIO_NR(3, 22),
+ GPIO_LED_PWR_B = IMX_GPIO_NR(3, 23),
+ GPIO_LED_PWR_G = IMX_GPIO_NR(3, 24),
+ GPIO_SUPS_INT = IMX_GPIO_NR(3, 31),
+ GPIO_C3_CONFIG = IMX_GPIO_NR(6, 8),
+ GPIO_C3_STATUS = IMX_GPIO_NR(6, 7),
+ GPIO_C3_DONE = IMX_GPIO_NR(6, 9),
+};
+
+#define CCAT_BASE_ADDR ((void *)0xf0000000)
+#define CCAT_END_ADDR (CCAT_BASE_ADDR + (1024 * 1024 * 32))
+#define CCAT_SIZE 1191788
+#define CCAT_SIGN_ADDR (CCAT_BASE_ADDR + 12)
+static const char CCAT_SIGNATURE[] = "CCAT";
+
+static const u32 CCAT_MODE_CONFIG = 0x0024DC81;
+static const u32 CCAT_MODE_RUN = 0x0033DC8F;
+
+DECLARE_GLOBAL_DATA_PTR;
+
+static uint32_t mx53_dram_size[2];
+
+phys_size_t get_effective_memsize(void)
+{
+ /*
+ * WARNING: We must override get_effective_memsize() function here
+ * to report only the size of the first DRAM bank. This is to make
+ * U-Boot relocator place U-Boot into valid memory, that is, at the
+ * end of the first DRAM bank. If we did not override this function
+ * like so, U-Boot would be placed at the address of the first DRAM
+ * bank + total DRAM size - sizeof(uboot), which in the setup where
+ * each DRAM bank contains 512MiB of DRAM would result in placing
+ * U-Boot into invalid memory area close to the end of the first
+ * DRAM bank.
+ */
+ return mx53_dram_size[0];
+}
+
+int dram_init(void)
+{
+ mx53_dram_size[0] = get_ram_size((void *)PHYS_SDRAM_1, 1 << 30);
+ mx53_dram_size[1] = get_ram_size((void *)PHYS_SDRAM_2, 1 << 30);
+
+ gd->ram_size = mx53_dram_size[0] + mx53_dram_size[1];
+
+ return 0;
+}
+
+void dram_init_banksize(void)
+{
+ gd->bd->bi_dram[0].start = PHYS_SDRAM_1;
+ gd->bd->bi_dram[0].size = mx53_dram_size[0];
+
+ gd->bd->bi_dram[1].start = PHYS_SDRAM_2;
+ gd->bd->bi_dram[1].size = mx53_dram_size[1];
+}
+
+u32 get_board_rev(void)
+{
+ struct iim_regs *iim = (struct iim_regs *)IMX_IIM_BASE;
+ struct fuse_bank *bank = &iim->bank[0];
+ struct fuse_bank0_regs *fuse =
+ (struct fuse_bank0_regs *)bank->fuse_regs;
+
+ int rev = readl(&fuse->gp[6]);
+
+ return (get_cpu_rev() & ~(0xF << 8)) | (rev & 0xF) << 8;
+}
+
+/*
+ * Set CCAT mode
+ * @mode: use CCAT_MODE_CONFIG or CCAT_MODE_RUN
+ */
+void weim_cs0_settings(u32 mode)
+{
+ struct weim *weim_regs = (struct weim *)WEIM_BASE_ADDR;
+
+ writel(0x0, &weim_regs->cs0gcr1);
+ writel(mode, &weim_regs->cs0gcr1);
+ writel(0x00001002, &weim_regs->cs0gcr2);
+
+ writel(0x04000000, &weim_regs->cs0rcr1);
+ writel(0x00000000, &weim_regs->cs0rcr2);
+
+ writel(0x04000000, &weim_regs->cs0wcr1);
+ writel(0x00000000, &weim_regs->cs0wcr2);
+}
+
+static void setup_gpio_eim(void)
+{
+ gpio_direction_input(GPIO_C3_STATUS);
+ gpio_direction_input(GPIO_C3_DONE);
+ gpio_direction_output(GPIO_C3_CONFIG, 1);
+
+ weim_cs0_settings(CCAT_MODE_RUN);
+}
+
+static void setup_gpio_sups(void)
+{
+ gpio_direction_input(GPIO_SUPS_INT);
+
+ static const int BLINK_INTERVALL = 50000;
+ int status = 1;
+ while (gpio_get_value(GPIO_SUPS_INT)) {
+ /* signal "CX SUPS power fail" */
+ gpio_set_value(GPIO_LED_PWR_R,
+ (++status / BLINK_INTERVALL) % 2);
+ }
+
+ /* signal "CX power up" */
+ gpio_set_value(GPIO_LED_PWR_R, 1);
+}
+
+static void setup_gpio_leds(void)
+{
+ gpio_direction_output(GPIO_LED_SD2_R, 0);
+ gpio_direction_output(GPIO_LED_SD2_B, 0);
+ gpio_direction_output(GPIO_LED_SD2_G, 0);
+ gpio_direction_output(GPIO_LED_SD1_R, 0);
+ gpio_direction_output(GPIO_LED_SD1_B, 0);
+ gpio_direction_output(GPIO_LED_SD1_G, 0);
+ gpio_direction_output(GPIO_LED_PWR_R, 0);
+ gpio_direction_output(GPIO_LED_PWR_B, 0);
+ gpio_direction_output(GPIO_LED_PWR_G, 0);
+}
+
+#ifdef CONFIG_USB_EHCI_MX5
+int board_ehci_hcd_init(int port)
+{
+ /* request VBUS power enable pin, GPIO7_8 */
+ gpio_direction_output(IMX_GPIO_NR(7, 8), 1);
+ return 0;
+}
+#endif
+
+#ifdef CONFIG_FSL_ESDHC
+struct fsl_esdhc_cfg esdhc_cfg[2] = {
+ {MMC_SDHC1_BASE_ADDR},
+ {MMC_SDHC2_BASE_ADDR},
+};
+
+int board_mmc_getcd(struct mmc *mmc)
+{
+ struct fsl_esdhc_cfg *cfg = (struct fsl_esdhc_cfg *)mmc->priv;
+ int ret;
+
+ gpio_direction_input(GPIO_SD1_CD);
+ gpio_direction_input(GPIO_SD2_CD);
+
+ if (cfg->esdhc_base == MMC_SDHC1_BASE_ADDR)
+ ret = !gpio_get_value(GPIO_SD1_CD);
+ else
+ ret = !gpio_get_value(GPIO_SD2_CD);
+
+ return ret;
+}
+
+int board_mmc_init(bd_t *bis)
+{
+ u32 index;
+ int ret;
+
+ esdhc_cfg[0].sdhc_clk = mxc_get_clock(MXC_ESDHC_CLK);
+ esdhc_cfg[1].sdhc_clk = mxc_get_clock(MXC_ESDHC2_CLK);
+
+ for (index = 0; index < CONFIG_SYS_FSL_ESDHC_NUM; index++) {
+ switch (index) {
+ case 0:
+ break;
+ case 1:
+ break;
+ default:
+ printf("Warning: you configured more ESDHC controller(%d) as supported by the board(2)\n",
+ CONFIG_SYS_FSL_ESDHC_NUM);
+ return -EINVAL;
+ }
+ ret = fsl_esdhc_initialize(bis, &esdhc_cfg[index]);
+ if (ret)
+ return ret;
+ }
+
+ return 0;
+}
+#endif
+
+static int power_init(void)
+{
+ /* nothing to do on CX9020 */
+ return 0;
+}
+
+static void clock_1GHz(void)
+{
+ int ret;
+ u32 ref_clk = MXC_HCLK;
+ /*
+ * After increasing voltage to 1.25V, we can switch
+ * CPU clock to 1GHz and DDR to 400MHz safely
+ */
+ ret = mxc_set_clock(ref_clk, 1000, MXC_ARM_CLK);
+ if (ret)
+ printf("CPU: Switch CPU clock to 1GHZ failed\n");
+
+ ret = mxc_set_clock(ref_clk, 400, MXC_PERIPH_CLK);
+ ret |= mxc_set_clock(ref_clk, 400, MXC_DDR_CLK);
+ if (ret)
+ printf("CPU: Switch DDR clock to 400MHz failed\n");
+}
+
+int board_early_init_f(void)
+{
+ setup_gpio_leds();
+ setup_gpio_sups();
+ setup_gpio_eim();
+ setup_iomux_lcd();
+
+ return 0;
+}
+
+/*
+ * Do not overwrite the console
+ * Use always serial for U-Boot console
+ */
+int overwrite_console(void)
+{
+ return 1;
+}
+
+int board_init(void)
+{
+ gd->bd->bi_boot_params = PHYS_SDRAM_1 + 0x100;
+
+ mxc_set_sata_internal_clock();
+
+ return 0;
+}
+
+int checkboard(void)
+{
+ puts("Board: Beckhoff CX9020\n");
+
+ return 0;
+}
+
+static int ccat_config_fn(int assert_config, int flush, int cookie)
+{
+ /* prepare FPGA for programming */
+ weim_cs0_settings(CCAT_MODE_CONFIG);
+ gpio_set_value(GPIO_C3_CONFIG, 0);
+ udelay(1);
+ gpio_set_value(GPIO_C3_CONFIG, 1);
+ udelay(230);
+
+ return FPGA_SUCCESS;
+}
+
+static int ccat_status_fn(int cookie)
+{
+ return FPGA_FAIL;
+}
+
+static int ccat_write_fn(const void *buf, size_t buf_len, int flush, int cookie)
+{
+ const uint8_t *const buffer = buf;
+
+ /* program CCAT */
+ int i;
+ for (i = 0; i < buf_len; ++i)
+ writeb(buffer[i], CCAT_BASE_ADDR);
+
+ writeb(0xff, CCAT_BASE_ADDR);
+ writeb(0xff, CCAT_BASE_ADDR);
+
+ return FPGA_SUCCESS;
+}
+
+static int ccat_done_fn(int cookie)
+{
+ /* programming complete? */
+ return gpio_get_value(GPIO_C3_DONE);
+}
+
+static int ccat_post_fn(int cookie)
+{
+ /* switch to FPGA run mode */
+ weim_cs0_settings(CCAT_MODE_RUN);
+ invalidate_dcache_range((ulong) CCAT_BASE_ADDR, (ulong) CCAT_END_ADDR);
+
+ if (memcmp(CCAT_SIGN_ADDR, CCAT_SIGNATURE, sizeof(CCAT_SIGNATURE))) {
+ printf("Verifing CCAT firmware failed, signature not found\n");
+ return FPGA_FAIL;
+ }
+
+ /* signal "CX booting OS" */
+ gpio_set_value(GPIO_LED_PWR_R, 1);
+ gpio_set_value(GPIO_LED_PWR_G, 1);
+ gpio_set_value(GPIO_LED_PWR_B, 0);
+ return FPGA_SUCCESS;
+}
+
+static Altera_CYC2_Passive_Serial_fns ccat_fns = {
+ .config = ccat_config_fn,
+ .status = ccat_status_fn,
+ .done = ccat_done_fn,
+ .write = ccat_write_fn,
+ .abort = ccat_post_fn,
+ .post = ccat_post_fn,
+};
+
+static Altera_desc ccat_fpga = {
+ .family = Altera_CYC2,
+ .iface = passive_serial,
+ .size = CCAT_SIZE,
+ .iface_fns = &ccat_fns,
+ .base = CCAT_BASE_ADDR,
+};
+
+int board_late_init(void)
+{
+ if (!power_init())
+ clock_1GHz();
+
+ fpga_init();
+ fpga_add(fpga_altera, &ccat_fpga);
+
+ return 0;
+}
diff --git a/board/beckhoff/mx53cx9020/mx53cx9020_video.c b/board/beckhoff/mx53cx9020/mx53cx9020_video.c
new file mode 100644
index 0000000..4da83da
--- /dev/null
+++ b/board/beckhoff/mx53cx9020/mx53cx9020_video.c
@@ -0,0 +1,49 @@
+/*
+ * Copyright (C) 2015 Beckhoff Automation GmbH & Co. KG
+ * Patrick Bruenn <p.bruenn@beckhoff.com>
+ *
+ * Based on <u-boot>/board/freescale/mx53loco/mx53loco_video.c
+ * Copyright (C) 2012 Freescale Semiconductor, Inc.
+ *
+ * SPDX-License-Identifier: GPL-2.0+
+ */
+
+#include <common.h>
+#include <linux/list.h>
+#include <asm/gpio.h>
+#include <asm/arch/iomux-mx53.h>
+#include <linux/fb.h>
+#include <ipu_pixfmt.h>
+
+#define CX9020_DVI_PWD IMX_GPIO_NR(6, 1)
+
+static struct fb_videomode const vga_640x480 = {
+ .name = "VESA_VGA_640x480",
+ .refresh = 60,
+ .xres = 640,
+ .yres = 480,
+ .pixclock = 39721, /* picosecond (25.175 MHz) */
+ .left_margin = 40,
+ .right_margin = 60,
+ .upper_margin = 10,
+ .lower_margin = 10,
+ .hsync_len = 20,
+ .vsync_len = 10,
+ .sync = 0,
+ .vmode = FB_VMODE_NONINTERLACED
+};
+
+void setup_iomux_lcd(void)
+{
+ /* Turn on DVI_PWD */
+ imx_iomux_v3_setup_pad(MX53_PAD_CSI0_DAT15__GPIO6_1);
+ gpio_direction_output(CX9020_DVI_PWD, 1);
+}
+
+int board_video_skip(void)
+{
+ const int ret = ipuv3_fb_init(&vga_640x480, 0, IPU_PIX_FMT_RGB24);
+ if (ret)
+ printf("VESA VG 640x480 cannot be configured: %d\n", ret);
+ return ret;
+}
diff --git a/board/engicam/geam6ul/Kconfig b/board/engicam/geam6ul/Kconfig
new file mode 100644
index 0000000..8753d15
--- /dev/null
+++ b/board/engicam/geam6ul/Kconfig
@@ -0,0 +1,12 @@
+if TARGET_MX6UL_GEAM
+
+config SYS_BOARD
+ default "geam6ul"
+
+config SYS_VENDOR
+ default "engicam"
+
+config SYS_CONFIG_NAME
+ default "imx6ul_geam"
+
+endif
diff --git a/board/engicam/geam6ul/MAINTAINERS b/board/engicam/geam6ul/MAINTAINERS
new file mode 100644
index 0000000..6691450
--- /dev/null
+++ b/board/engicam/geam6ul/MAINTAINERS
@@ -0,0 +1,6 @@
+GEAM6UL BOARD
+M: Jagan Teki <jagan@amarulasolutions.com>
+S: Maintained
+F: board/engicam/geam6ul
+F: include/configs/imx6ul_geam.h
+F: configs/imx6ul_geam_mmc_defconfig
diff --git a/board/engicam/geam6ul/Makefile b/board/engicam/geam6ul/Makefile
new file mode 100644
index 0000000..0e367e2
--- /dev/null
+++ b/board/engicam/geam6ul/Makefile
@@ -0,0 +1,6 @@
+# Copyright (C) 2016 Amarula Solutions B.V.
+#
+# SPDX-License-Identifier: GPL-2.0+
+#
+
+obj-y := geam6ul.o
diff --git a/board/engicam/geam6ul/README b/board/engicam/geam6ul/README
new file mode 100644
index 0000000..0df6ae4
--- /dev/null
+++ b/board/engicam/geam6ul/README
@@ -0,0 +1,28 @@
+How to use U-Boot on Engicam GEAM6UL Starter Kit:
+-------------------------------------------------
+
+- Configure U-Boot for Engicam GEAM6UL:
+
+$ make mrproper
+$ make imx6ul_geam_mmc_defconfig
+$ make
+
+This will generate the SPL image called SPL and the u-boot-dtb.img.
+
+- Flash the SPL image into the micro SD card:
+
+sudo dd if=SPL of=/dev/mmcblk0 bs=1k seek=1; sync
+
+- Flash the u-boot-dtb.img image into the micro SD card:
+
+sudo dd if=u-boot-dtb.img of=/dev/mmcblk0 bs=1k seek=69; sync
+
+- Jumper settings:
+
+MMC Boot: JM3 Closed
+
+- Connect the Serial cable between the Starter Kit and the PC for the console.
+(J28 is the Linux Serial console connector)
+
+- Insert the micro SD card in the board, power it up and U-Boot messages should
+come up.
diff --git a/board/engicam/geam6ul/geam6ul.c b/board/engicam/geam6ul/geam6ul.c
new file mode 100644
index 0000000..40f20a9
--- /dev/null
+++ b/board/engicam/geam6ul/geam6ul.c
@@ -0,0 +1,317 @@
+/*
+ * Copyright (C) 2016 Amarula Solutions B.V.
+ * Copyright (C) 2016 Engicam S.r.l.
+ * Author: Jagan Teki <jagan@amarulasolutions.com>
+ *
+ * SPDX-License-Identifier: GPL-2.0+
+ */
+
+#include <common.h>
+
+#include <asm/io.h>
+#include <asm/gpio.h>
+#include <linux/sizes.h>
+
+#include <asm/arch/clock.h>
+#include <asm/arch/crm_regs.h>
+#include <asm/arch/iomux.h>
+#include <asm/arch/mx6-pins.h>
+#include <asm/arch/sys_proto.h>
+#include <asm/imx-common/iomux-v3.h>
+
+DECLARE_GLOBAL_DATA_PTR;
+
+#define UART_PAD_CTRL (PAD_CTL_PKE | PAD_CTL_PUE | \
+ PAD_CTL_PUS_100K_UP | PAD_CTL_SPEED_MED | \
+ PAD_CTL_DSE_40ohm | PAD_CTL_SRE_FAST | PAD_CTL_HYS)
+
+static iomux_v3_cfg_t const uart1_pads[] = {
+ MX6_PAD_UART1_TX_DATA__UART1_DCE_TX | MUX_PAD_CTRL(UART_PAD_CTRL),
+ MX6_PAD_UART1_RX_DATA__UART1_DCE_RX | MUX_PAD_CTRL(UART_PAD_CTRL),
+};
+
+int board_early_init_f(void)
+{
+ imx_iomux_v3_setup_multiple_pads(uart1_pads, ARRAY_SIZE(uart1_pads));
+
+ return 0;
+}
+
+#ifdef CONFIG_NAND_MXS
+
+#define GPMI_PAD_CTRL0 (PAD_CTL_PKE | PAD_CTL_PUE | PAD_CTL_PUS_100K_UP)
+#define GPMI_PAD_CTRL1 (PAD_CTL_DSE_40ohm | PAD_CTL_SPEED_MED | \
+ PAD_CTL_SRE_FAST)
+#define GPMI_PAD_CTRL2 (GPMI_PAD_CTRL0 | GPMI_PAD_CTRL1)
+
+static iomux_v3_cfg_t const nand_pads[] = {
+ MX6_PAD_NAND_DATA00__RAWNAND_DATA00 | MUX_PAD_CTRL(GPMI_PAD_CTRL2),
+ MX6_PAD_NAND_DATA01__RAWNAND_DATA01 | MUX_PAD_CTRL(GPMI_PAD_CTRL2),
+ MX6_PAD_NAND_DATA02__RAWNAND_DATA02 | MUX_PAD_CTRL(GPMI_PAD_CTRL2),
+ MX6_PAD_NAND_DATA03__RAWNAND_DATA03 | MUX_PAD_CTRL(GPMI_PAD_CTRL2),
+ MX6_PAD_NAND_DATA04__RAWNAND_DATA04 | MUX_PAD_CTRL(GPMI_PAD_CTRL2),
+ MX6_PAD_NAND_DATA05__RAWNAND_DATA05 | MUX_PAD_CTRL(GPMI_PAD_CTRL2),
+ MX6_PAD_NAND_DATA06__RAWNAND_DATA06 | MUX_PAD_CTRL(GPMI_PAD_CTRL2),
+ MX6_PAD_NAND_DATA07__RAWNAND_DATA07 | MUX_PAD_CTRL(GPMI_PAD_CTRL2),
+ MX6_PAD_NAND_CLE__RAWNAND_CLE | MUX_PAD_CTRL(GPMI_PAD_CTRL2),
+ MX6_PAD_NAND_ALE__RAWNAND_ALE | MUX_PAD_CTRL(GPMI_PAD_CTRL2),
+ MX6_PAD_NAND_CE0_B__RAWNAND_CE0_B | MUX_PAD_CTRL(GPMI_PAD_CTRL2),
+ MX6_PAD_NAND_RE_B__RAWNAND_RE_B | MUX_PAD_CTRL(GPMI_PAD_CTRL2),
+ MX6_PAD_NAND_WE_B__RAWNAND_WE_B | MUX_PAD_CTRL(GPMI_PAD_CTRL2),
+ MX6_PAD_NAND_WP_B__RAWNAND_WP_B | MUX_PAD_CTRL(GPMI_PAD_CTRL2),
+ MX6_PAD_NAND_READY_B__RAWNAND_READY_B | MUX_PAD_CTRL(GPMI_PAD_CTRL2),
+};
+
+static void setup_gpmi_nand(void)
+{
+ struct mxc_ccm_reg *mxc_ccm = (struct mxc_ccm_reg *)CCM_BASE_ADDR;
+
+ /* config gpmi nand iomux */
+ imx_iomux_v3_setup_multiple_pads(nand_pads, ARRAY_SIZE(nand_pads));
+
+ clrbits_le32(&mxc_ccm->CCGR4,
+ MXC_CCM_CCGR4_RAWNAND_U_BCH_INPUT_APB_MASK |
+ MXC_CCM_CCGR4_RAWNAND_U_GPMI_BCH_INPUT_BCH_MASK |
+ MXC_CCM_CCGR4_RAWNAND_U_GPMI_BCH_INPUT_GPMI_IO_MASK |
+ MXC_CCM_CCGR4_RAWNAND_U_GPMI_INPUT_APB_MASK |
+ MXC_CCM_CCGR4_PL301_MX6QPER1_BCH_MASK);
+
+ /*
+ * config gpmi and bch clock to 100 MHz
+ * bch/gpmi select PLL2 PFD2 400M
+ * 100M = 400M / 4
+ */
+ clrbits_le32(&mxc_ccm->cscmr1,
+ MXC_CCM_CSCMR1_BCH_CLK_SEL |
+ MXC_CCM_CSCMR1_GPMI_CLK_SEL);
+ clrsetbits_le32(&mxc_ccm->cscdr1,
+ MXC_CCM_CSCDR1_BCH_PODF_MASK |
+ MXC_CCM_CSCDR1_GPMI_PODF_MASK,
+ (3 << MXC_CCM_CSCDR1_BCH_PODF_OFFSET) |
+ (3 << MXC_CCM_CSCDR1_GPMI_PODF_OFFSET));
+
+ /* enable gpmi and bch clock gating */
+ setbits_le32(&mxc_ccm->CCGR4,
+ MXC_CCM_CCGR4_RAWNAND_U_BCH_INPUT_APB_MASK |
+ MXC_CCM_CCGR4_RAWNAND_U_GPMI_BCH_INPUT_BCH_MASK |
+ MXC_CCM_CCGR4_RAWNAND_U_GPMI_BCH_INPUT_GPMI_IO_MASK |
+ MXC_CCM_CCGR4_RAWNAND_U_GPMI_INPUT_APB_MASK |
+ MXC_CCM_CCGR4_PL301_MX6QPER1_BCH_MASK);
+
+ /* enable apbh clock gating */
+ setbits_le32(&mxc_ccm->CCGR0, MXC_CCM_CCGR0_APBHDMA_MASK);
+}
+#endif /* CONFIG_NAND_MXS */
+
+int board_init(void)
+{
+ /* Address of boot parameters */
+ gd->bd->bi_boot_params = PHYS_SDRAM + 0x100;
+
+#ifdef CONFIG_NAND_MXS
+ setup_gpmi_nand();
+#endif
+
+ return 0;
+}
+
+int dram_init(void)
+{
+ gd->ram_size = imx_ddr_size();
+
+ return 0;
+}
+
+#ifdef CONFIG_SPL_BUILD
+#include <libfdt.h>
+#include <spl.h>
+
+#include <asm/arch/crm_regs.h>
+#include <asm/arch/mx6-ddr.h>
+
+/* MMC board initialization is needed till adding DM support in SPL */
+#if defined(CONFIG_FSL_ESDHC) && !defined(CONFIG_DM_MMC)
+#include <mmc.h>
+#include <fsl_esdhc.h>
+
+#define USDHC_PAD_CTRL (PAD_CTL_PKE | PAD_CTL_PUE | \
+ PAD_CTL_PUS_22K_UP | PAD_CTL_SPEED_LOW | \
+ PAD_CTL_DSE_80ohm | PAD_CTL_SRE_FAST | PAD_CTL_HYS)
+
+static iomux_v3_cfg_t const usdhc1_pads[] = {
+ MX6_PAD_SD1_CLK__USDHC1_CLK | MUX_PAD_CTRL(USDHC_PAD_CTRL),
+ MX6_PAD_SD1_CMD__USDHC1_CMD | MUX_PAD_CTRL(USDHC_PAD_CTRL),
+ MX6_PAD_SD1_DATA0__USDHC1_DATA0 | MUX_PAD_CTRL(USDHC_PAD_CTRL),
+ MX6_PAD_SD1_DATA1__USDHC1_DATA1 | MUX_PAD_CTRL(USDHC_PAD_CTRL),
+ MX6_PAD_SD1_DATA2__USDHC1_DATA2 | MUX_PAD_CTRL(USDHC_PAD_CTRL),
+ MX6_PAD_SD1_DATA3__USDHC1_DATA3 | MUX_PAD_CTRL(USDHC_PAD_CTRL),
+
+ /* VSELECT */
+ MX6_PAD_GPIO1_IO05__USDHC1_VSELECT | MUX_PAD_CTRL(USDHC_PAD_CTRL),
+ /* CD */
+ MX6_PAD_UART1_RTS_B__GPIO1_IO19 | MUX_PAD_CTRL(NO_PAD_CTRL),
+ /* RST_B */
+ MX6_PAD_GPIO1_IO09__GPIO1_IO09 | MUX_PAD_CTRL(NO_PAD_CTRL),
+};
+
+#define USDHC1_CD_GPIO IMX_GPIO_NR(1, 1)
+
+struct fsl_esdhc_cfg usdhc_cfg[1] = {
+ {USDHC1_BASE_ADDR, 0, 4},
+};
+
+int board_mmc_getcd(struct mmc *mmc)
+{
+ struct fsl_esdhc_cfg *cfg = (struct fsl_esdhc_cfg *)mmc->priv;
+ int ret = 0;
+
+ switch (cfg->esdhc_base) {
+ case USDHC1_BASE_ADDR:
+ ret = !gpio_get_value(USDHC1_CD_GPIO);
+ break;
+ }
+
+ return ret;
+}
+
+int board_mmc_init(bd_t *bis)
+{
+ int i, ret;
+
+ /*
+ * According to the board_mmc_init() the following map is done:
+ * (U-boot device node) (Physical Port)
+ * mmc0 USDHC1
+ */
+ for (i = 0; i < CONFIG_SYS_FSL_USDHC_NUM; i++) {
+ switch (i) {
+ case 0:
+ imx_iomux_v3_setup_multiple_pads(
+ usdhc1_pads, ARRAY_SIZE(usdhc1_pads));
+ gpio_direction_input(USDHC1_CD_GPIO);
+ usdhc_cfg[0].sdhc_clk = mxc_get_clock(MXC_ESDHC_CLK);
+ break;
+ default:
+ printf("Warning - USDHC%d controller not supporting\n",
+ i + 1);
+ return 0;
+ }
+
+ ret = fsl_esdhc_initialize(bis, &usdhc_cfg[i]);
+ if (ret) {
+ printf("Warning: failed to initialize mmc dev %d\n", i);
+ return ret;
+ }
+ }
+
+ return 0;
+}
+#endif /* CONFIG_FSL_ESDHC */
+
+static struct mx6ul_iomux_grp_regs mx6_grp_ioregs = {
+ .grp_addds = 0x00000030,
+ .grp_ddrmode_ctl = 0x00020000,
+ .grp_b0ds = 0x00000030,
+ .grp_ctlds = 0x00000030,
+ .grp_b1ds = 0x00000030,
+ .grp_ddrpke = 0x00000000,
+ .grp_ddrmode = 0x00020000,
+ .grp_ddr_type = 0x000c0000,
+};
+
+static struct mx6ul_iomux_ddr_regs mx6_ddr_ioregs = {
+ .dram_dqm0 = 0x00000030,
+ .dram_dqm1 = 0x00000030,
+ .dram_ras = 0x00000030,
+ .dram_cas = 0x00000030,
+ .dram_odt0 = 0x00000030,
+ .dram_odt1 = 0x00000030,
+ .dram_sdba2 = 0x00000000,
+ .dram_sdclk_0 = 0x00000008,
+ .dram_sdqs0 = 0x00000038,
+ .dram_sdqs1 = 0x00000030,
+ .dram_reset = 0x00000030,
+};
+
+static struct mx6_mmdc_calibration mx6_mmcd_calib = {
+ .p0_mpwldectrl0 = 0x00070007,
+ .p0_mpdgctrl0 = 0x41490145,
+ .p0_mprddlctl = 0x40404546,
+ .p0_mpwrdlctl = 0x4040524D,
+};
+
+struct mx6_ddr_sysinfo ddr_sysinfo = {
+ .dsize = 0,
+ .cs_density = 20,
+ .ncs = 1,
+ .cs1_mirror = 0,
+ .rtt_wr = 2,
+ .rtt_nom = 1, /* RTT_Nom = RZQ/2 */
+ .walat = 1, /* Write additional latency */
+ .ralat = 5, /* Read additional latency */
+ .mif3_mode = 3, /* Command prediction working mode */
+ .bi_on = 1, /* Bank interleaving enabled */
+ .sde_to_rst = 0x10, /* 14 cycles, 200us (JEDEC default) */
+ .rst_to_cke = 0x23, /* 33 cycles, 500us (JEDEC default) */
+ .ddr_type = DDR_TYPE_DDR3,
+};
+
+static struct mx6_ddr3_cfg mem_ddr = {
+ .mem_speed = 800,
+ .density = 4,
+ .width = 16,
+ .banks = 8,
+ .rowaddr = 13,
+ .coladdr = 10,
+ .pagesz = 2,
+ .trcd = 1375,
+ .trcmin = 4875,
+ .trasmin = 3500,
+};
+
+static void ccgr_init(void)
+{
+ struct mxc_ccm_reg *ccm = (struct mxc_ccm_reg *)CCM_BASE_ADDR;
+
+ writel(0xFFFFFFFF, &ccm->CCGR0);
+ writel(0xFFFFFFFF, &ccm->CCGR1);
+ writel(0xFFFFFFFF, &ccm->CCGR2);
+ writel(0xFFFFFFFF, &ccm->CCGR3);
+ writel(0xFFFFFFFF, &ccm->CCGR4);
+ writel(0xFFFFFFFF, &ccm->CCGR5);
+ writel(0xFFFFFFFF, &ccm->CCGR6);
+ writel(0xFFFFFFFF, &ccm->CCGR7);
+}
+
+static void spl_dram_init(void)
+{
+ mx6ul_dram_iocfg(mem_ddr.width, &mx6_ddr_ioregs, &mx6_grp_ioregs);
+ mx6_dram_cfg(&ddr_sysinfo, &mx6_mmcd_calib, &mem_ddr);
+}
+
+void board_init_f(ulong dummy)
+{
+ /* setup AIPS and disable watchdog */
+ arch_cpu_init();
+
+ ccgr_init();
+
+ /* iomux and setup of i2c */
+ board_early_init_f();
+
+ /* setup GP timer */
+ timer_init();
+
+ /* UART clocks enabled and gd valid - init serial console */
+ preloader_console_init();
+
+ /* DDR initialization */
+ spl_dram_init();
+
+ /* Clear the BSS. */
+ memset(__bss_start, 0, __bss_end - __bss_start);
+
+ /* load/boot image from boot device */
+ board_init_r(NULL, 0);
+}
+#endif /* CONFIG_SPL_BUILD */
diff --git a/board/engicam/icorem6/MAINTAINERS b/board/engicam/icorem6/MAINTAINERS
index a425afb..0ef3a2c 100644
--- a/board/engicam/icorem6/MAINTAINERS
+++ b/board/engicam/icorem6/MAINTAINERS
@@ -3,5 +3,7 @@
S: Maintained
F: board/engicam/icorem6
F: include/configs/imx6qdl_icore.h
-F: configs/imx6qdl_icore_mmc_defconfig
-F: configs/imx6qdl_icore_nand_defconfig
+F: configs/imx6q_icore_mmc_defconfig
+F: configs/imx6q_icore_nand_defconfig
+F: configs/imx6dl_icore_mmc_defconfig
+F: configs/imx6dl_icore_nand_defconfig
diff --git a/board/engicam/icorem6/README b/board/engicam/icorem6/README
index e47f85f..6461c0a 100644
--- a/board/engicam/icorem6/README
+++ b/board/engicam/icorem6/README
@@ -1,18 +1,16 @@
-How to use U-Boot on Engicam i.CoreM6 DualLite/Solo and Quad/Dual Starter Kit:
+How to use U-Boot on Engicam i.CoreM6 Solo/DualLite and Quad/Dual Starter Kit:
-----------------------------------------------------------------------------
-- Configure U-Boot for Engicam i.CoreM6 QDL:
-
$ make mrproper
-$ make imx6qdl_icore_mmc_defconfig
-- Build for i.CoreM6 DualLite/Solo
-
-$ make
+- Configure U-Boot for Engicam i.CoreM6 Quad/Dual:
+$ make imx6q_icore_mmc_defconfig
-- Build for i.CoreM6 Quad/Dual
+- Configure U-Boot for Engicam i.CoreM6 Solo/DualLite:
+$ make imx6dl_icore_mmc_defconfig
-$ make DEVICE_TREE=imx6q-icore
+- Build U-Boot
+$ make
This will generate the SPL image called SPL and the u-boot-dtb.img.
@@ -33,6 +31,3 @@
- Insert the micro SD card in the board, power it up and U-Boot messages should
come up.
-
-- Note: For loading Linux on Quad/Dual modules set the dtb as
- icorem6qdl> setenv fdt_file imx6q-icore.dtb
diff --git a/board/engicam/icorem6/icorem6.c b/board/engicam/icorem6/icorem6.c
index c152007..171ec45 100644
--- a/board/engicam/icorem6/icorem6.c
+++ b/board/engicam/icorem6/icorem6.c
@@ -7,8 +7,6 @@
*/
#include <common.h>
-#include <miiphy.h>
-#include <netdev.h>
#include <asm/io.h>
#include <asm/gpio.h>
@@ -20,6 +18,7 @@
#include <asm/arch/mx6-pins.h>
#include <asm/arch/sys_proto.h>
#include <asm/imx-common/iomux-v3.h>
+#include <asm/imx-common/video.h>
DECLARE_GLOBAL_DATA_PTR;
@@ -27,80 +26,11 @@
PAD_CTL_PUS_100K_UP | PAD_CTL_SPEED_MED | \
PAD_CTL_DSE_40ohm | PAD_CTL_SRE_FAST | PAD_CTL_HYS)
-#define ENET_PAD_CTRL (PAD_CTL_PKE | PAD_CTL_PUE | \
- PAD_CTL_PUS_100K_UP | PAD_CTL_SPEED_MED | \
- PAD_CTL_DSE_40ohm | PAD_CTL_HYS)
-
static iomux_v3_cfg_t const uart4_pads[] = {
IOMUX_PADS(PAD_KEY_COL0__UART4_TX_DATA | MUX_PAD_CTRL(UART_PAD_CTRL)),
IOMUX_PADS(PAD_KEY_ROW0__UART4_RX_DATA | MUX_PAD_CTRL(UART_PAD_CTRL)),
};
-static iomux_v3_cfg_t const enet_pads[] = {
- IOMUX_PADS(PAD_ENET_CRS_DV__ENET_RX_EN | MUX_PAD_CTRL(ENET_PAD_CTRL)),
- IOMUX_PADS(PAD_GPIO_16__ENET_REF_CLK | MUX_PAD_CTRL(ENET_PAD_CTRL | PAD_CTL_SRE_FAST)),
- IOMUX_PADS(PAD_ENET_TX_EN__ENET_TX_EN | MUX_PAD_CTRL(ENET_PAD_CTRL)),
- IOMUX_PADS(PAD_ENET_RXD1__ENET_RX_DATA1 | MUX_PAD_CTRL(ENET_PAD_CTRL)),
- IOMUX_PADS(PAD_ENET_RXD0__ENET_RX_DATA0 | MUX_PAD_CTRL(ENET_PAD_CTRL)),
- IOMUX_PADS(PAD_ENET_TXD1__ENET_TX_DATA1 | MUX_PAD_CTRL(ENET_PAD_CTRL)),
- IOMUX_PADS(PAD_ENET_TXD0__ENET_TX_DATA0 | MUX_PAD_CTRL(ENET_PAD_CTRL)),
- IOMUX_PADS(PAD_ENET_MDC__ENET_MDC | MUX_PAD_CTRL(ENET_PAD_CTRL)),
- IOMUX_PADS(PAD_ENET_MDIO__ENET_MDIO | MUX_PAD_CTRL(ENET_PAD_CTRL)),
- IOMUX_PADS(PAD_GPIO_17__GPIO7_IO12 | MUX_PAD_CTRL(NO_PAD_CTRL)),
-};
-
-#ifdef CONFIG_FEC_MXC
-#define ENET_PHY_RST IMX_GPIO_NR(7, 12)
-static int setup_fec(void)
-{
- struct mxc_ccm_reg *ccm = (struct mxc_ccm_reg *)CCM_BASE_ADDR;
- struct anatop_regs *anatop = (struct anatop_regs *)ANATOP_BASE_ADDR;
- s32 timeout = 100000;
- u32 reg = 0;
- int ret;
-
- /* Enable fec clock */
- setbits_le32(&ccm->CCGR1, MXC_CCM_CCGR1_ENET_MASK);
-
- /* use 50MHz */
- ret = enable_fec_anatop_clock(0, ENET_50MHZ);
- if (ret)
- return ret;
-
- /* Enable PLLs */
- reg = readl(&anatop->pll_enet);
- reg &= ~BM_ANADIG_PLL_SYS_POWERDOWN;
- writel(reg, &anatop->pll_enet);
- reg = readl(&anatop->pll_enet);
- reg |= BM_ANADIG_PLL_SYS_ENABLE;
- while (timeout--) {
- if (readl(&anatop->pll_enet) & BM_ANADIG_PLL_SYS_LOCK)
- break;
- }
- if (timeout <= 0)
- return -EIO;
- reg &= ~BM_ANADIG_PLL_SYS_BYPASS;
- writel(reg, &anatop->pll_enet);
-
- /* reset the phy */
- gpio_direction_output(ENET_PHY_RST, 0);
- udelay(10000);
- gpio_set_value(ENET_PHY_RST, 1);
-
- return 0;
-}
-
-int board_eth_init(bd_t *bis)
-{
- int ret;
-
- SETUP_IOMUX_PADS(enet_pads);
- setup_fec();
-
- return ret = cpu_eth_init(bis);
-}
-#endif
-
#ifdef CONFIG_NAND_MXS
#define GPMI_PAD_CTRL0 (PAD_CTL_PKE | PAD_CTL_PUE | PAD_CTL_PUS_100K_UP)
@@ -161,6 +91,113 @@
}
#endif
+#if defined(CONFIG_VIDEO_IPUV3)
+static iomux_v3_cfg_t const rgb_pads[] = {
+ IOMUX_PADS(PAD_DI0_DISP_CLK__IPU1_DI0_DISP_CLK),
+ IOMUX_PADS(PAD_DI0_PIN15__IPU1_DI0_PIN15),
+ IOMUX_PADS(PAD_DI0_PIN2__IPU1_DI0_PIN02),
+ IOMUX_PADS(PAD_DI0_PIN3__IPU1_DI0_PIN03),
+ IOMUX_PADS(PAD_DISP0_DAT0__IPU1_DISP0_DATA00),
+ IOMUX_PADS(PAD_DISP0_DAT1__IPU1_DISP0_DATA01),
+ IOMUX_PADS(PAD_DISP0_DAT2__IPU1_DISP0_DATA02),
+ IOMUX_PADS(PAD_DISP0_DAT3__IPU1_DISP0_DATA03),
+ IOMUX_PADS(PAD_DISP0_DAT4__IPU1_DISP0_DATA04),
+ IOMUX_PADS(PAD_DISP0_DAT5__IPU1_DISP0_DATA05),
+ IOMUX_PADS(PAD_DISP0_DAT6__IPU1_DISP0_DATA06),
+ IOMUX_PADS(PAD_DISP0_DAT7__IPU1_DISP0_DATA07),
+ IOMUX_PADS(PAD_DISP0_DAT8__IPU1_DISP0_DATA08),
+ IOMUX_PADS(PAD_DISP0_DAT9__IPU1_DISP0_DATA09),
+ IOMUX_PADS(PAD_DISP0_DAT10__IPU1_DISP0_DATA10),
+ IOMUX_PADS(PAD_DISP0_DAT11__IPU1_DISP0_DATA11),
+ IOMUX_PADS(PAD_DISP0_DAT12__IPU1_DISP0_DATA12),
+ IOMUX_PADS(PAD_DISP0_DAT13__IPU1_DISP0_DATA13),
+ IOMUX_PADS(PAD_DISP0_DAT14__IPU1_DISP0_DATA14),
+ IOMUX_PADS(PAD_DISP0_DAT15__IPU1_DISP0_DATA15),
+ IOMUX_PADS(PAD_DISP0_DAT16__IPU1_DISP0_DATA16),
+ IOMUX_PADS(PAD_DISP0_DAT17__IPU1_DISP0_DATA17),
+};
+
+static void enable_rgb(struct display_info_t const *dev)
+{
+ SETUP_IOMUX_PADS(rgb_pads);
+}
+
+struct display_info_t const displays[] = {
+ {
+ .bus = -1,
+ .addr = 0,
+ .pixfmt = IPU_PIX_FMT_RGB666,
+ .detect = NULL,
+ .enable = enable_rgb,
+ .mode = {
+ .name = "Amp-WD",
+ .refresh = 60,
+ .xres = 800,
+ .yres = 480,
+ .pixclock = 30000,
+ .left_margin = 30,
+ .right_margin = 30,
+ .upper_margin = 5,
+ .lower_margin = 5,
+ .hsync_len = 64,
+ .vsync_len = 20,
+ .sync = FB_SYNC_EXT,
+ .vmode = FB_VMODE_NONINTERLACED
+ }
+ },
+};
+
+size_t display_count = ARRAY_SIZE(displays);
+
+static void setup_display(void)
+{
+ struct mxc_ccm_reg *mxc_ccm = (struct mxc_ccm_reg *)CCM_BASE_ADDR;
+ struct iomuxc *iomux = (struct iomuxc *)IOMUXC_BASE_ADDR;
+ int reg;
+
+ enable_ipu_clock();
+
+ /* Turn on LDB0,IPU,IPU DI0 clocks */
+ reg = __raw_readl(&mxc_ccm->CCGR3);
+ reg |= (MXC_CCM_CCGR3_LDB_DI0_MASK | 0xffff);
+ writel(reg, &mxc_ccm->CCGR3);
+
+ /* set LDB0, LDB1 clk select to 011/011 */
+ reg = readl(&mxc_ccm->cs2cdr);
+ reg &= ~(MXC_CCM_CS2CDR_LDB_DI0_CLK_SEL_MASK |
+ MXC_CCM_CS2CDR_LDB_DI1_CLK_SEL_MASK);
+ reg |= (3 << MXC_CCM_CS2CDR_LDB_DI0_CLK_SEL_OFFSET) |
+ (3 << MXC_CCM_CS2CDR_LDB_DI1_CLK_SEL_OFFSET);
+ writel(reg, &mxc_ccm->cs2cdr);
+
+ reg = readl(&mxc_ccm->cscmr2);
+ reg |= MXC_CCM_CSCMR2_LDB_DI0_IPU_DIV;
+ writel(reg, &mxc_ccm->cscmr2);
+
+ reg = readl(&mxc_ccm->chsccdr);
+ reg |= (CHSCCDR_CLK_SEL_LDB_DI0 <<
+ MXC_CCM_CHSCCDR_IPU1_DI0_CLK_SEL_OFFSET);
+ writel(reg, &mxc_ccm->chsccdr);
+
+ reg = IOMUXC_GPR2_BGREF_RRMODE_EXTERNAL_RES |
+ IOMUXC_GPR2_DI1_VS_POLARITY_ACTIVE_HIGH |
+ IOMUXC_GPR2_DI0_VS_POLARITY_ACTIVE_LOW |
+ IOMUXC_GPR2_BIT_MAPPING_CH1_SPWG |
+ IOMUXC_GPR2_DATA_WIDTH_CH1_18BIT |
+ IOMUXC_GPR2_BIT_MAPPING_CH0_SPWG |
+ IOMUXC_GPR2_DATA_WIDTH_CH0_18BIT |
+ IOMUXC_GPR2_LVDS_CH1_MODE_DISABLED |
+ IOMUXC_GPR2_LVDS_CH0_MODE_ENABLED_DI0;
+ writel(reg, &iomux->gpr[2]);
+
+ reg = readl(&iomux->gpr[3]);
+ reg = (reg & ~IOMUXC_GPR3_LVDS0_MUX_CTL_MASK) |
+ (IOMUXC_GPR3_MUX_SRC_IPU1_DI0 <<
+ IOMUXC_GPR3_LVDS0_MUX_CTL_OFFSET);
+ writel(reg, &iomux->gpr[3]);
+}
+#endif /* CONFIG_VIDEO_IPUV3 */
+
int board_early_init_f(void)
{
SETUP_IOMUX_PADS(uart4_pads);
@@ -176,6 +213,11 @@
#ifdef CONFIG_NAND_MXS
setup_gpmi_nand();
#endif
+
+#ifdef CONFIG_VIDEO_IPUV3
+ setup_display();
+#endif
+
return 0;
}
diff --git a/board/engicam/icorem6_rqs/Kconfig b/board/engicam/icorem6_rqs/Kconfig
new file mode 100644
index 0000000..1352c68
--- /dev/null
+++ b/board/engicam/icorem6_rqs/Kconfig
@@ -0,0 +1,12 @@
+if TARGET_MX6Q_ICORE_RQS
+
+config SYS_BOARD
+ default "icorem6_rqs"
+
+config SYS_VENDOR
+ default "engicam"
+
+config SYS_CONFIG_NAME
+ default "imx6qdl_icore_rqs"
+
+endif
diff --git a/board/engicam/icorem6_rqs/MAINTAINERS b/board/engicam/icorem6_rqs/MAINTAINERS
new file mode 100644
index 0000000..0556211
--- /dev/null
+++ b/board/engicam/icorem6_rqs/MAINTAINERS
@@ -0,0 +1,7 @@
+ICOREM6QDL_RQS BOARD
+M: Jagan Teki <jagan@amarulasolutions.com>
+S: Maintained
+F: board/engicam/icorem6_rqs
+F: include/configs/imx6qdl_icore_rqs.h
+F: configs/imx6q_icore_rqs_mmc_defconfig
+F: configs/imx6dl_icore_rqs_mmc_defconfig
diff --git a/board/engicam/icorem6_rqs/Makefile b/board/engicam/icorem6_rqs/Makefile
new file mode 100644
index 0000000..2e3933c
--- /dev/null
+++ b/board/engicam/icorem6_rqs/Makefile
@@ -0,0 +1,6 @@
+# Copyright (C) 2016 Amarula Solutions B.V.
+#
+# SPDX-License-Identifier: GPL-2.0+
+#
+
+obj-y := icorem6_rqs.o
diff --git a/board/engicam/icorem6_rqs/README b/board/engicam/icorem6_rqs/README
new file mode 100644
index 0000000..ccce622
--- /dev/null
+++ b/board/engicam/icorem6_rqs/README
@@ -0,0 +1,33 @@
+How to use U-Boot on Engicam i.CoreM6 RQS Solo/DualLite and Quad/Dual Starter Kit:
+----------------------------------------------------------------------------------
+
+$ make mrproper
+
+- Configure U-Boot for Engicam i.CoreM6 RQS Quad/Dual:
+$ make imx6q_icore_rqs_mmc_defconfig
+
+- Configure U-Boot for Engicam i.CoreM6 RQS Solo/DualLite:
+$ make imx6dl_icore_rqs_mmc_defconfig
+
+- Build U-Boot
+$ make
+
+This will generate the SPL image called SPL and the u-boot-dtb.img.
+
+- Flash the SPL image into the micro SD card:
+
+sudo dd if=SPL of=/dev/mmcblk0 bs=1k seek=1; sync
+
+- Flash the u-boot-dtb.img image into the micro SD card:
+
+sudo dd if=u-boot-dtb.img of=/dev/mmcblk0 bs=1k seek=69; sync
+
+- Jumper settings:
+
+MMC Boot: JM3 Closed
+
+- Connect the Serial cable between the Starter Kit and the PC for the console.
+(J28 is the Linux Serial console connector)
+
+- Insert the micro SD card in the board, power it up and U-Boot messages should
+come up.
diff --git a/board/engicam/icorem6_rqs/icorem6_rqs.c b/board/engicam/icorem6_rqs/icorem6_rqs.c
new file mode 100644
index 0000000..2769177
--- /dev/null
+++ b/board/engicam/icorem6_rqs/icorem6_rqs.c
@@ -0,0 +1,399 @@
+/*
+ * Copyright (C) 2016 Amarula Solutions B.V.
+ * Copyright (C) 2016 Engicam S.r.l.
+ * Author: Jagan Teki <jagan@amarulasolutions.com>
+ *
+ * SPDX-License-Identifier: GPL-2.0+
+ */
+
+#include <common.h>
+
+#include <asm/io.h>
+#include <asm/gpio.h>
+#include <linux/sizes.h>
+
+#include <asm/arch/clock.h>
+#include <asm/arch/crm_regs.h>
+#include <asm/arch/iomux.h>
+#include <asm/arch/mx6-pins.h>
+#include <asm/arch/sys_proto.h>
+#include <asm/imx-common/iomux-v3.h>
+
+DECLARE_GLOBAL_DATA_PTR;
+
+#define UART_PAD_CTRL (PAD_CTL_PKE | PAD_CTL_PUE | \
+ PAD_CTL_PUS_100K_UP | PAD_CTL_SPEED_MED | \
+ PAD_CTL_DSE_40ohm | PAD_CTL_SRE_FAST | PAD_CTL_HYS)
+
+static iomux_v3_cfg_t const uart4_pads[] = {
+ IOMUX_PADS(PAD_KEY_COL0__UART4_TX_DATA | MUX_PAD_CTRL(UART_PAD_CTRL)),
+ IOMUX_PADS(PAD_KEY_ROW0__UART4_RX_DATA | MUX_PAD_CTRL(UART_PAD_CTRL)),
+};
+
+int board_early_init_f(void)
+{
+ SETUP_IOMUX_PADS(uart4_pads);
+
+ return 0;
+}
+
+int board_init(void)
+{
+ /* Address of boot parameters */
+ gd->bd->bi_boot_params = PHYS_SDRAM + 0x100;
+
+ return 0;
+}
+
+int dram_init(void)
+{
+ gd->ram_size = imx_ddr_size();
+
+ return 0;
+}
+
+#ifdef CONFIG_SPL_BUILD
+#include <libfdt.h>
+#include <spl.h>
+
+#include <asm/arch/crm_regs.h>
+#include <asm/arch/mx6-ddr.h>
+
+/* MMC board initialization is needed till adding DM support in SPL */
+#if defined(CONFIG_FSL_ESDHC) && !defined(CONFIG_DM_MMC)
+#include <mmc.h>
+#include <fsl_esdhc.h>
+
+#define USDHC_PAD_CTRL (PAD_CTL_PKE | PAD_CTL_PUE | \
+ PAD_CTL_PUS_47K_UP | PAD_CTL_SPEED_HIGH | \
+ PAD_CTL_DSE_40ohm | PAD_CTL_SRE_FAST | PAD_CTL_HYS)
+
+static iomux_v3_cfg_t const usdhc3_pads[] = {
+ IOMUX_PADS(PAD_SD3_CLK__SD3_CLK | MUX_PAD_CTRL(USDHC_PAD_CTRL)),
+ IOMUX_PADS(PAD_SD3_CMD__SD3_CMD | MUX_PAD_CTRL(USDHC_PAD_CTRL)),
+ IOMUX_PADS(PAD_SD3_DAT0__SD3_DATA0 | MUX_PAD_CTRL(USDHC_PAD_CTRL)),
+ IOMUX_PADS(PAD_SD3_DAT1__SD3_DATA1 | MUX_PAD_CTRL(USDHC_PAD_CTRL)),
+ IOMUX_PADS(PAD_SD3_DAT2__SD3_DATA2 | MUX_PAD_CTRL(USDHC_PAD_CTRL)),
+ IOMUX_PADS(PAD_SD3_DAT3__SD3_DATA3 | MUX_PAD_CTRL(USDHC_PAD_CTRL)),
+};
+
+struct fsl_esdhc_cfg usdhc_cfg[1] = {
+ {USDHC3_BASE_ADDR, 1, 4},
+};
+
+int board_mmc_getcd(struct mmc *mmc)
+{
+ struct fsl_esdhc_cfg *cfg = (struct fsl_esdhc_cfg *)mmc->priv;
+ int ret = 0;
+
+ switch (cfg->esdhc_base) {
+ case USDHC3_BASE_ADDR:
+ ret = 1;
+ break;
+ }
+
+ return ret;
+}
+
+int board_mmc_init(bd_t *bis)
+{
+ int i, ret;
+
+ /*
+ * According to the board_mmc_init() the following map is done:
+ * (U-boot device node) (Physical Port)
+ * mmc0 USDHC3
+ */
+ for (i = 0; i < CONFIG_SYS_FSL_USDHC_NUM; i++) {
+ switch (i) {
+ case 0:
+ SETUP_IOMUX_PADS(usdhc3_pads);
+ usdhc_cfg[i].sdhc_clk = mxc_get_clock(MXC_ESDHC3_CLK);
+ break;
+ default:
+ printf("Warning - USDHC%d controller not supporting\n",
+ i + 1);
+ return 0;
+ }
+
+ ret = fsl_esdhc_initialize(bis, &usdhc_cfg[i]);
+ if (ret) {
+ printf("Warning: failed to initialize mmc dev %d\n", i);
+ return ret;
+ }
+ }
+
+ return 0;
+}
+#endif
+
+/*
+ * Driving strength:
+ * 0x30 == 40 Ohm
+ * 0x28 == 48 Ohm
+ */
+
+#define IMX6DQ_DRIVE_STRENGTH 0x30
+#define IMX6SDL_DRIVE_STRENGTH 0x28
+
+/* configure MX6Q/DUAL mmdc DDR io registers */
+static struct mx6dq_iomux_ddr_regs mx6dq_ddr_ioregs = {
+ .dram_sdqs0 = 0x28,
+ .dram_sdqs1 = 0x28,
+ .dram_sdqs2 = 0x28,
+ .dram_sdqs3 = 0x28,
+ .dram_sdqs4 = 0x28,
+ .dram_sdqs5 = 0x28,
+ .dram_sdqs6 = 0x28,
+ .dram_sdqs7 = 0x28,
+ .dram_dqm0 = 0x28,
+ .dram_dqm1 = 0x28,
+ .dram_dqm2 = 0x28,
+ .dram_dqm3 = 0x28,
+ .dram_dqm4 = 0x28,
+ .dram_dqm5 = 0x28,
+ .dram_dqm6 = 0x28,
+ .dram_dqm7 = 0x28,
+ .dram_cas = 0x30,
+ .dram_ras = 0x30,
+ .dram_sdclk_0 = 0x30,
+ .dram_sdclk_1 = 0x30,
+ .dram_reset = 0x30,
+ .dram_sdcke0 = 0x3000,
+ .dram_sdcke1 = 0x3000,
+ .dram_sdba2 = 0x00000000,
+ .dram_sdodt0 = 0x30,
+ .dram_sdodt1 = 0x30,
+};
+
+/* configure MX6Q/DUAL mmdc GRP io registers */
+static struct mx6dq_iomux_grp_regs mx6dq_grp_ioregs = {
+ .grp_b0ds = 0x30,
+ .grp_b1ds = 0x30,
+ .grp_b2ds = 0x30,
+ .grp_b3ds = 0x30,
+ .grp_b4ds = 0x30,
+ .grp_b5ds = 0x30,
+ .grp_b6ds = 0x30,
+ .grp_b7ds = 0x30,
+ .grp_addds = 0x30,
+ .grp_ddrmode_ctl = 0x00020000,
+ .grp_ddrpke = 0x00000000,
+ .grp_ddrmode = 0x00020000,
+ .grp_ctlds = 0x30,
+ .grp_ddr_type = 0x000c0000,
+};
+
+/* configure MX6SOLO/DUALLITE mmdc DDR io registers */
+struct mx6sdl_iomux_ddr_regs mx6sdl_ddr_ioregs = {
+ .dram_sdclk_0 = 0x30,
+ .dram_sdclk_1 = 0x30,
+ .dram_cas = 0x30,
+ .dram_ras = 0x30,
+ .dram_reset = 0x30,
+ .dram_sdcke0 = 0x30,
+ .dram_sdcke1 = 0x30,
+ .dram_sdba2 = 0x00000000,
+ .dram_sdodt0 = 0x30,
+ .dram_sdodt1 = 0x30,
+ .dram_sdqs0 = 0x28,
+ .dram_sdqs1 = 0x28,
+ .dram_sdqs2 = 0x28,
+ .dram_sdqs3 = 0x28,
+ .dram_sdqs4 = 0x28,
+ .dram_sdqs5 = 0x28,
+ .dram_sdqs6 = 0x28,
+ .dram_sdqs7 = 0x28,
+ .dram_dqm0 = 0x28,
+ .dram_dqm1 = 0x28,
+ .dram_dqm2 = 0x28,
+ .dram_dqm3 = 0x28,
+ .dram_dqm4 = 0x28,
+ .dram_dqm5 = 0x28,
+ .dram_dqm6 = 0x28,
+ .dram_dqm7 = 0x28,
+};
+
+/* configure MX6SOLO/DUALLITE mmdc GRP io registers */
+struct mx6sdl_iomux_grp_regs mx6sdl_grp_ioregs = {
+ .grp_ddr_type = 0x000c0000,
+ .grp_ddrmode_ctl = 0x00020000,
+ .grp_ddrpke = 0x00000000,
+ .grp_addds = 0x30,
+ .grp_ctlds = 0x30,
+ .grp_ddrmode = 0x00020000,
+ .grp_b0ds = 0x28,
+ .grp_b1ds = 0x28,
+ .grp_b2ds = 0x28,
+ .grp_b3ds = 0x28,
+ .grp_b4ds = 0x28,
+ .grp_b5ds = 0x28,
+ .grp_b6ds = 0x28,
+ .grp_b7ds = 0x28,
+};
+
+/* mt41j256 */
+static struct mx6_ddr3_cfg mt41j256 = {
+ .mem_speed = 1066,
+ .density = 2,
+ .width = 16,
+ .banks = 8,
+ .rowaddr = 13,
+ .coladdr = 10,
+ .pagesz = 2,
+ .trcd = 1375,
+ .trcmin = 4875,
+ .trasmin = 3500,
+ .SRT = 0,
+};
+
+static struct mx6_mmdc_calibration mx6dq_mmdc_calib = {
+ .p0_mpwldectrl0 = 0x000E0009,
+ .p0_mpwldectrl1 = 0x0018000E,
+ .p1_mpwldectrl0 = 0x00000007,
+ .p1_mpwldectrl1 = 0x00000000,
+ .p0_mpdgctrl0 = 0x43280334,
+ .p0_mpdgctrl1 = 0x031C0314,
+ .p1_mpdgctrl0 = 0x4318031C,
+ .p1_mpdgctrl1 = 0x030C0258,
+ .p0_mprddlctl = 0x3E343A40,
+ .p1_mprddlctl = 0x383C3844,
+ .p0_mpwrdlctl = 0x40404440,
+ .p1_mpwrdlctl = 0x4C3E4446,
+};
+
+/* DDR 64bit */
+static struct mx6_ddr_sysinfo mem_q = {
+ .ddr_type = DDR_TYPE_DDR3,
+ .dsize = 2,
+ .cs1_mirror = 0,
+ /* config for full 4GB range so that get_mem_size() works */
+ .cs_density = 32,
+ .ncs = 1,
+ .bi_on = 1,
+ .rtt_nom = 2,
+ .rtt_wr = 2,
+ .ralat = 5,
+ .walat = 0,
+ .mif3_mode = 3,
+ .rst_to_cke = 0x23,
+ .sde_to_rst = 0x10,
+};
+
+static struct mx6_mmdc_calibration mx6dl_mmdc_calib = {
+ .p0_mpwldectrl0 = 0x001F0024,
+ .p0_mpwldectrl1 = 0x00110018,
+ .p1_mpwldectrl0 = 0x001F0024,
+ .p1_mpwldectrl1 = 0x00110018,
+ .p0_mpdgctrl0 = 0x4230022C,
+ .p0_mpdgctrl1 = 0x02180220,
+ .p1_mpdgctrl0 = 0x42440248,
+ .p1_mpdgctrl1 = 0x02300238,
+ .p0_mprddlctl = 0x44444A48,
+ .p1_mprddlctl = 0x46484A42,
+ .p0_mpwrdlctl = 0x38383234,
+ .p1_mpwrdlctl = 0x3C34362E,
+};
+
+/* DDR 64bit 1GB */
+static struct mx6_ddr_sysinfo mem_dl = {
+ .dsize = 2,
+ .cs1_mirror = 0,
+ /* config for full 4GB range so that get_mem_size() works */
+ .cs_density = 32,
+ .ncs = 1,
+ .bi_on = 1,
+ .rtt_nom = 1,
+ .rtt_wr = 1,
+ .ralat = 5,
+ .walat = 0,
+ .mif3_mode = 3,
+ .rst_to_cke = 0x23,
+ .sde_to_rst = 0x10,
+};
+
+/* DDR 32bit 512MB */
+static struct mx6_ddr_sysinfo mem_s = {
+ .dsize = 1,
+ .cs1_mirror = 0,
+ /* config for full 4GB range so that get_mem_size() works */
+ .cs_density = 32,
+ .ncs = 1,
+ .bi_on = 1,
+ .rtt_nom = 1,
+ .rtt_wr = 1,
+ .ralat = 5,
+ .walat = 0,
+ .mif3_mode = 3,
+ .rst_to_cke = 0x23,
+ .sde_to_rst = 0x10,
+};
+
+static void ccgr_init(void)
+{
+ struct mxc_ccm_reg *ccm = (struct mxc_ccm_reg *)CCM_BASE_ADDR;
+
+ writel(0x00003F3F, &ccm->CCGR0);
+ writel(0x0030FC00, &ccm->CCGR1);
+ writel(0x000FC000, &ccm->CCGR2);
+ writel(0x3F300000, &ccm->CCGR3);
+ writel(0xFF00F300, &ccm->CCGR4);
+ writel(0x0F0000C3, &ccm->CCGR5);
+ writel(0x000003CC, &ccm->CCGR6);
+}
+
+static void gpr_init(void)
+{
+ struct iomuxc *iomux = (struct iomuxc *)IOMUXC_BASE_ADDR;
+
+ /* enable AXI cache for VDOA/VPU/IPU */
+ writel(0xF00000CF, &iomux->gpr[4]);
+ /* set IPU AXI-id0 Qos=0xf(bypass) AXI-id1 Qos=0x7 */
+ writel(0x007F007F, &iomux->gpr[6]);
+ writel(0x007F007F, &iomux->gpr[7]);
+}
+
+static void spl_dram_init(void)
+{
+ if (is_mx6solo()) {
+ mx6sdl_dram_iocfg(32, &mx6sdl_ddr_ioregs, &mx6sdl_grp_ioregs);
+ mx6_dram_cfg(&mem_s, &mx6dl_mmdc_calib, &mt41j256);
+ } else if (is_mx6dl()) {
+ mx6sdl_dram_iocfg(64, &mx6sdl_ddr_ioregs, &mx6sdl_grp_ioregs);
+ mx6_dram_cfg(&mem_dl, &mx6dl_mmdc_calib, &mt41j256);
+ } else if (is_mx6dq()) {
+ mx6dq_dram_iocfg(64, &mx6dq_ddr_ioregs, &mx6dq_grp_ioregs);
+ mx6_dram_cfg(&mem_q, &mx6dq_mmdc_calib, &mt41j256);
+ }
+
+ udelay(100);
+}
+
+void board_init_f(ulong dummy)
+{
+ ccgr_init();
+
+ /* setup AIPS and disable watchdog */
+ arch_cpu_init();
+
+ gpr_init();
+
+ /* iomux */
+ board_early_init_f();
+
+ /* setup GP timer */
+ timer_init();
+
+ /* UART clocks enabled and gd valid - init serial console */
+ preloader_console_init();
+
+ /* DDR initialization */
+ spl_dram_init();
+
+ /* Clear the BSS. */
+ memset(__bss_start, 0, __bss_end - __bss_start);
+
+ /* load/boot image from boot device */
+ board_init_r(NULL, 0);
+}
+#endif
diff --git a/board/freescale/mx6sllevk/Kconfig b/board/freescale/mx6sllevk/Kconfig
new file mode 100644
index 0000000..4ba9bbf
--- /dev/null
+++ b/board/freescale/mx6sllevk/Kconfig
@@ -0,0 +1,12 @@
+if TARGET_MX6SLLEVK
+
+config SYS_BOARD
+ default "mx6sllevk"
+
+config SYS_VENDOR
+ default "freescale"
+
+config SYS_CONFIG_NAME
+ default "mx6sllevk"
+
+endif
diff --git a/board/freescale/mx6sllevk/Makefile b/board/freescale/mx6sllevk/Makefile
new file mode 100644
index 0000000..667fcb0
--- /dev/null
+++ b/board/freescale/mx6sllevk/Makefile
@@ -0,0 +1,6 @@
+# (C) Copyright 2016 Freescale Semiconductor, Inc.
+#
+# SPDX-License-Identifier: GPL-2.0+
+#
+
+obj-y := mx6sllevk.o
diff --git a/board/freescale/mx6sllevk/imximage.cfg b/board/freescale/mx6sllevk/imximage.cfg
new file mode 100644
index 0000000..7d8b323
--- /dev/null
+++ b/board/freescale/mx6sllevk/imximage.cfg
@@ -0,0 +1,127 @@
+/*
+ * Copyright (C) 2016 Freescale Semiconductor, Inc.
+ *
+ * SPDX-License-Identifier: GPL-2.0+
+ *
+ * Refer docs/README.imxmage for more details about how-to configure
+ * and create imximage boot image
+ *
+ * The syntax is taken as close as possible with the kwbimage
+ */
+
+#define __ASSEMBLY__
+#include <config.h>
+
+/* image version */
+
+IMAGE_VERSION 2
+
+/*
+ * Boot Device : one of
+ * spi, sd (the board has no nand neither onenand)
+ */
+
+BOOT_FROM sd
+
+#ifdef CONFIG_USE_IMXIMG_PLUGIN
+/*PLUGIN plugin-binary-file IRAM_FREE_START_ADDR*/
+PLUGIN board/freescale/mx6sllevk/plugin.bin 0x00907000
+#else
+
+#ifdef CONFIG_SECURE_BOOT
+CSF CONFIG_CSF_SIZE
+#endif
+
+/*
+ * Device Configuration Data (DCD)
+ *
+ * Each entry must have the format:
+ * Addr-type Address Value
+ *
+ * where:
+ * Addr-type register length (1,2 or 4 bytes)
+ * Address absolute address of the register
+ * value value to be stored in the register
+ */
+
+/* Enable all clocks */
+DATA 4 0x020c4068 0xffffffff
+DATA 4 0x020c406c 0xffffffff
+DATA 4 0x020c4070 0xffffffff
+DATA 4 0x020c4074 0xffffffff
+DATA 4 0x020c4078 0xffffffff
+DATA 4 0x020c407c 0xffffffff
+DATA 4 0x020c4080 0xffffffff
+
+DATA 4 0x020E0550 0x00080000
+DATA 4 0x020E0534 0x00000000
+DATA 4 0x020E02AC 0x00000030
+DATA 4 0x020E0548 0x00000030
+DATA 4 0x020E052C 0x00000030
+DATA 4 0x020E0530 0x00020000
+DATA 4 0x020E02B0 0x00003030
+DATA 4 0x020E02B4 0x00003030
+DATA 4 0x020E02B8 0x00003030
+DATA 4 0x020E02BC 0x00003030
+DATA 4 0x020E0540 0x00020000
+DATA 4 0x020E0544 0x00000030
+DATA 4 0x020E054C 0x00000030
+DATA 4 0x020E0554 0x00000030
+DATA 4 0x020E0558 0x00000030
+DATA 4 0x020E0294 0x00000030
+DATA 4 0x020E0298 0x00000030
+DATA 4 0x020E029C 0x00000030
+DATA 4 0x020E02A0 0x00000030
+DATA 4 0x020E02C0 0x00082030
+
+DATA 4 0x021B001C 0x00008000
+
+DATA 4 0x021B0800 0xA1390003
+DATA 4 0x021B085c 0x084700C7
+DATA 4 0x021B0890 0x00400000
+DATA 4 0x021B0848 0x3F393B3C
+DATA 4 0x021B0850 0x262C3826
+DATA 4 0x021B081C 0x33333333
+DATA 4 0x021B0820 0x33333333
+DATA 4 0x021B0824 0x33333333
+DATA 4 0x021B0828 0x33333333
+
+DATA 4 0x021B082C 0xf3333333
+DATA 4 0x021B0830 0xf3333333
+DATA 4 0x021B0834 0xf3333333
+DATA 4 0x021B0838 0xf3333333
+DATA 4 0x021B08C0 0x24922492
+DATA 4 0x021B08b8 0x00000800
+
+DATA 4 0x021B0004 0x00020052
+DATA 4 0x021B000C 0x53574333
+DATA 4 0x021B0010 0x00100B22
+DATA 4 0x021B0038 0x00170778
+DATA 4 0x021B0014 0x00C700DB
+DATA 4 0x021B0018 0x00201718
+DATA 4 0x021B002C 0x0F9F26D2
+DATA 4 0x021B0030 0x009F0E10
+DATA 4 0x021B0040 0x0000005F
+DATA 4 0x021B0000 0xC4190000
+
+DATA 4 0x021B083C 0x20000000
+
+DATA 4 0x021B001C 0x00008050
+DATA 4 0x021B001C 0x00008058
+DATA 4 0x021B001C 0x003F8030
+DATA 4 0x021B001C 0x003F8038
+DATA 4 0x021B001C 0xFF0A8030
+DATA 4 0x021B001C 0xFF0A8038
+DATA 4 0x021B001C 0x04028030
+DATA 4 0x021B001C 0x04028038
+DATA 4 0x021B001C 0x83018030
+DATA 4 0x021B001C 0x83018038
+DATA 4 0x021B001C 0x01038030
+DATA 4 0x021B001C 0x01038038
+
+DATA 4 0x021B0020 0x00001800
+DATA 4 0x021B0800 0xA1390003
+DATA 4 0x021B0004 0x00020052
+DATA 4 0x021B0404 0x00011006
+DATA 4 0x021B001C 0x00000000
+#endif
diff --git a/board/freescale/mx6sllevk/mx6sllevk.c b/board/freescale/mx6sllevk/mx6sllevk.c
new file mode 100644
index 0000000..74a27a3
--- /dev/null
+++ b/board/freescale/mx6sllevk/mx6sllevk.c
@@ -0,0 +1,131 @@
+/*
+ * Copyright (C) 2016 Freescale Semiconductor, Inc.
+ *
+ * SPDX-License-Identifier: GPL-2.0+
+ */
+
+#include <asm/arch/clock.h>
+#include <asm/arch/crm_regs.h>
+#include <asm/arch/iomux.h>
+#include <asm/arch/imx-regs.h>
+#include <asm/arch/mx6-pins.h>
+#include <asm/arch/sys_proto.h>
+#include <asm/gpio.h>
+#include <asm/imx-common/iomux-v3.h>
+#include <asm/imx-common/boot_mode.h>
+#include <asm/io.h>
+#include <common.h>
+#include <linux/sizes.h>
+#include <mmc.h>
+#include <power/pmic.h>
+#include <power/pfuze100_pmic.h>
+#include "../common/pfuze.h"
+
+DECLARE_GLOBAL_DATA_PTR;
+
+#define UART_PAD_CTRL (PAD_CTL_PKE | PAD_CTL_PUE | \
+ PAD_CTL_PUS_100K_UP | PAD_CTL_SPEED_MED | \
+ PAD_CTL_DSE_40ohm | PAD_CTL_SRE_FAST | PAD_CTL_HYS)
+
+int dram_init(void)
+{
+ gd->ram_size = imx_ddr_size();
+
+ return 0;
+}
+
+static iomux_v3_cfg_t const uart1_pads[] = {
+ MX6_PAD_UART1_TXD__UART1_DCE_TX | MUX_PAD_CTRL(UART_PAD_CTRL),
+ MX6_PAD_UART1_RXD__UART1_DCE_RX | MUX_PAD_CTRL(UART_PAD_CTRL),
+};
+
+static iomux_v3_cfg_t const wdog_pads[] = {
+ MX6_PAD_WDOG_B__WDOG1_B | MUX_PAD_CTRL(NO_PAD_CTRL),
+};
+
+static void setup_iomux_uart(void)
+{
+ imx_iomux_v3_setup_multiple_pads(uart1_pads, ARRAY_SIZE(uart1_pads));
+}
+
+#ifdef CONFIG_DM_PMIC_PFUZE100
+int power_init_board(void)
+{
+ struct udevice *dev;
+ int ret;
+ u32 dev_id, rev_id, i;
+ u32 switch_num = 6;
+ u32 offset = PFUZE100_SW1CMODE;
+
+ ret = pmic_get("pfuze100", &dev);
+ if (ret == -ENODEV)
+ return 0;
+
+ if (ret != 0)
+ return ret;
+
+ dev_id = pmic_reg_read(dev, PFUZE100_DEVICEID);
+ rev_id = pmic_reg_read(dev, PFUZE100_REVID);
+ printf("PMIC: PFUZE100! DEV_ID=0x%x REV_ID=0x%x\n", dev_id, rev_id);
+
+
+ /* Init mode to APS_PFM */
+ pmic_reg_write(dev, PFUZE100_SW1ABMODE, APS_PFM);
+
+ for (i = 0; i < switch_num - 1; i++)
+ pmic_reg_write(dev, offset + i * SWITCH_SIZE, APS_PFM);
+
+ /* set SW1AB staby volatage 0.975V */
+ pmic_clrsetbits(dev, PFUZE100_SW1ABSTBY, 0x3f, 0x1b);
+
+ /* set SW1AB/VDDARM step ramp up time from 16us to 4us/25mV */
+ pmic_clrsetbits(dev, PFUZE100_SW1ABCONF, 0xc0, 0x40);
+
+ /* set SW1C staby volatage 0.975V */
+ pmic_clrsetbits(dev, PFUZE100_SW1CSTBY, 0x3f, 0x1b);
+
+ /* set SW1C/VDDSOC step ramp up time to from 16us to 4us/25mV */
+ pmic_clrsetbits(dev, PFUZE100_SW1CCONF, 0xc0, 0x40);
+
+ return 0;
+}
+#endif
+
+int board_early_init_f(void)
+{
+ setup_iomux_uart();
+
+ return 0;
+}
+
+int board_init(void)
+{
+ /* Address of boot parameters */
+ gd->bd->bi_boot_params = PHYS_SDRAM + 0x100;
+
+ return 0;
+}
+
+int board_late_init(void)
+{
+ imx_iomux_v3_setup_multiple_pads(wdog_pads, ARRAY_SIZE(wdog_pads));
+
+ return 0;
+}
+
+int checkboard(void)
+{
+ puts("Board: MX6SLL EVK\n");
+
+ return 0;
+}
+
+int board_mmc_get_env_dev(int devno)
+{
+ return devno;
+}
+
+int mmc_map_to_kernel_blk(int devno)
+{
+ return devno;
+}
diff --git a/board/freescale/mx6sllevk/plugin.S b/board/freescale/mx6sllevk/plugin.S
new file mode 100644
index 0000000..f9ef35a
--- /dev/null
+++ b/board/freescale/mx6sllevk/plugin.S
@@ -0,0 +1,155 @@
+/*
+ * Copyright (C) 2016 Freescale Semiconductor, Inc.
+ *
+ * SPDX-License-Identifier: GPL-2.0+
+ */
+
+#include <config.h>
+
+/* DDR script */
+.macro imx6sll_evk_ddr_setting
+ ldr r0, =IOMUXC_BASE_ADDR
+ ldr r1, =0x00080000
+ str r1, [r0, #0x550]
+ ldr r1, =0x00000000
+ str r1, [r0, #0x534]
+ ldr r1, =0x00000030
+ str r1, [r0, #0x2AC]
+ str r1, [r0, #0x548]
+ str r1, [r0, #0x52C]
+ ldr r1, =0x00020000
+ str r1, [r0, #0x530]
+ ldr r1, =0x00003030
+ str r1, [r0, #0x2B0]
+ str r1, [r0, #0x2B4]
+ str r1, [r0, #0x2B8]
+ str r1, [r0, #0x2BC]
+
+ ldr r1, =0x00020000
+ str r1, [r0, #0x540]
+ ldr r1, =0x00000030
+ str r1, [r0, #0x544]
+ str r1, [r0, #0x54C]
+ str r1, [r0, #0x554]
+ str r1, [r0, #0x558]
+ str r1, [r0, #0x294]
+ str r1, [r0, #0x298]
+ str r1, [r0, #0x29C]
+ str r1, [r0, #0x2A0]
+
+ ldr r1, =0x00082030
+ str r1, [r0, #0x2C0]
+
+ ldr r0, =MMDC_P0_BASE_ADDR
+ ldr r1, =0x00008000
+ str r1, [r0, #0x1C]
+ ldr r1, =0xA1390003
+ str r1, [r0, #0x800]
+ ldr r1, =0x084700C7
+ str r1, [r0, #0x85C]
+ ldr r1, =0x00400000
+ str r1, [r0, #0x890]
+
+ ldr r1, =0x3F393B3C
+ str r1, [r0, #0x848]
+ ldr r1, =0x262C3826
+ str r1, [r0, #0x850]
+
+ ldr r1, =0x33333333
+ str r1, [r0, #0x81C]
+ str r1, [r0, #0x820]
+ str r1, [r0, #0x824]
+ str r1, [r0, #0x828]
+
+ ldr r1, =0xf3333333
+ str r1, [r0, #0x82C]
+ str r1, [r0, #0x830]
+ str r1, [r0, #0x834]
+ str r1, [r0, #0x838]
+
+ ldr r1, =0x24922492
+ str r1, [r0, #0x8C0]
+ ldr r1, =0x00000800
+ str r1, [r0, #0x8B8]
+
+ ldr r1, =0x00020052
+ str r1, [r0, #0x004]
+ ldr r1, =0x53574333
+ str r1, [r0, #0x00C]
+ ldr r1, =0x00100B22
+ str r1, [r0, #0x010]
+ ldr r1, =0x00170778
+ str r1, [r0, #0x038]
+ ldr r1, =0x00C700DB
+ str r1, [r0, #0x014]
+ ldr r1, =0x00201718
+ str r1, [r0, #0x018]
+ ldr r1, =0x0F9F26D2
+ str r1, [r0, #0x02C]
+ ldr r1, =0x009F0E10
+ str r1, [r0, #0x030]
+ ldr r1, =0x0000005F
+ str r1, [r0, #0x040]
+ ldr r1, =0xC4190000
+ str r1, [r0, #0x000]
+ ldr r1, =0x20000000
+ str r1, [r0, #0x83C]
+
+ ldr r1, =0x00008050
+ str r1, [r0, #0x01C]
+ ldr r1, =0x00008058
+ str r1, [r0, #0x01C]
+ ldr r1, =0x003F8030
+ str r1, [r0, #0x01C]
+ ldr r1, =0x003F8038
+ str r1, [r0, #0x01C]
+ ldr r1, =0xFF0A8030
+ str r1, [r0, #0x01C]
+ ldr r1, =0xFF0A8038
+ str r1, [r0, #0x01C]
+ ldr r1, =0x04028030
+ str r1, [r0, #0x01C]
+ ldr r1, =0x04028038
+ str r1, [r0, #0x01C]
+ ldr r1, =0x83018030
+ str r1, [r0, #0x01C]
+ ldr r1, =0x83018038
+ str r1, [r0, #0x01C]
+ ldr r1, =0x01038030
+ str r1, [r0, #0x01C]
+ ldr r1, =0x01038038
+ str r1, [r0, #0x01C]
+
+ ldr r1, =0x00001800
+ str r1, [r0, #0x020]
+ ldr r1, =0xA1390003
+ str r1, [r0, #0x800]
+ ldr r1, =0x00020052
+ str r1, [r0, #0x004]
+ ldr r1, =0x00011006
+ str r1, [r0, #0x404]
+ ldr r1, =0x00000000
+ str r1, [r0, #0x01C]
+.endm
+
+.macro imx6_clock_gating
+ ldr r0, =CCM_BASE_ADDR
+ ldr r1, =0xffffffff
+ str r1, [r0, #0x068]
+ str r1, [r0, #0x06c]
+ str r1, [r0, #0x070]
+ str r1, [r0, #0x074]
+ str r1, [r0, #0x078]
+ str r1, [r0, #0x07c]
+ str r1, [r0, #0x080]
+.endm
+
+.macro imx6_qos_setting
+.endm
+
+.macro imx6_ddr_setting
+ imx6sll_evk_ddr_setting
+.endm
+
+/* include the common plugin code here */
+#include <asm/arch/mx6_plugin.S>
diff --git a/board/freescale/mx6sxsabresd/mx6sxsabresd.c b/board/freescale/mx6sxsabresd/mx6sxsabresd.c
index 965e511..0460cd9 100644
--- a/board/freescale/mx6sxsabresd/mx6sxsabresd.c
+++ b/board/freescale/mx6sxsabresd/mx6sxsabresd.c
@@ -504,7 +504,7 @@
static int setup_lcd(void)
{
- enable_lcdif_clock(LCDIF1_BASE_ADDR);
+ enable_lcdif_clock(LCDIF1_BASE_ADDR, 1);
imx_iomux_v3_setup_multiple_pads(lcd_pads, ARRAY_SIZE(lcd_pads));
diff --git a/board/freescale/mx6ul_14x14_evk/mx6ul_14x14_evk.c b/board/freescale/mx6ul_14x14_evk/mx6ul_14x14_evk.c
index 399bad2..b28ce10 100644
--- a/board/freescale/mx6ul_14x14_evk/mx6ul_14x14_evk.c
+++ b/board/freescale/mx6ul_14x14_evk/mx6ul_14x14_evk.c
@@ -600,7 +600,7 @@
static int setup_lcd(void)
{
- enable_lcdif_clock(LCDIF1_BASE_ADDR);
+ enable_lcdif_clock(LCDIF1_BASE_ADDR, 1);
imx_iomux_v3_setup_multiple_pads(lcd_pads, ARRAY_SIZE(lcd_pads));
diff --git a/board/grinn/liteboard/Kconfig b/board/grinn/liteboard/Kconfig
new file mode 100644
index 0000000..e035872
--- /dev/null
+++ b/board/grinn/liteboard/Kconfig
@@ -0,0 +1,12 @@
+if TARGET_LITEBOARD
+
+config SYS_BOARD
+ default "liteboard"
+
+config SYS_VENDOR
+ default "grinn"
+
+config SYS_CONFIG_NAME
+ default "liteboard"
+
+endif
diff --git a/board/grinn/liteboard/MAINTAINERS b/board/grinn/liteboard/MAINTAINERS
new file mode 100644
index 0000000..b4474f1
--- /dev/null
+++ b/board/grinn/liteboard/MAINTAINERS
@@ -0,0 +1,6 @@
+LITEBOARD
+M: Marcin Niestroj <m.niestroj@grinn-global.com>
+S: Maintained
+F: board/grinn/liteboard/
+F: include/configs/liteboard.h
+F: configs/liteboard_defconfig
diff --git a/board/grinn/liteboard/Makefile b/board/grinn/liteboard/Makefile
new file mode 100644
index 0000000..e2492d6
--- /dev/null
+++ b/board/grinn/liteboard/Makefile
@@ -0,0 +1,6 @@
+# (C) Copyright 2016 Grinn
+#
+# SPDX-License-Identifier: GPL-2.0+
+#
+
+obj-y := board.o
diff --git a/board/grinn/liteboard/README b/board/grinn/liteboard/README
new file mode 100644
index 0000000..bee0394
--- /dev/null
+++ b/board/grinn/liteboard/README
@@ -0,0 +1,31 @@
+How to use U-Boot on Grinn's liteBoard
+--------------------------------------
+
+- Build U-Boot for liteBoard:
+
+$ make mrproper
+$ make liteboard_defconfig
+$ make
+
+This will generate the SPL image called SPL and the u-boot.img.
+
+- Flash the SPL image into the micro SD card:
+
+sudo dd if=SPL of=/dev/mmcblk0 bs=1k seek=1; sync
+
+- Flash the u-boot.img image into the micro SD card:
+
+sudo dd if=u-boot.img of=/dev/mmcblk0 bs=1k seek=69; sync
+
+- Jumper settings:
+
+S1: 0 1 0 1 1 1
+
+where 0 means bottom position and 1 means top position (from the
+switch label numbers reference).
+
+- Insert the micro SD card in the board.
+
+- Connect USB cable between liteBoard and the PC for the power and console.
+
+- U-Boot messages should come up.
diff --git a/board/grinn/liteboard/board.c b/board/grinn/liteboard/board.c
new file mode 100644
index 0000000..13dd0a6
--- /dev/null
+++ b/board/grinn/liteboard/board.c
@@ -0,0 +1,287 @@
+/*
+ * Copyright (C) 2015-2016 Freescale Semiconductor, Inc.
+ * Copyright (C) 2016 Grinn
+ *
+ * SPDX-License-Identifier: GPL-2.0+
+ */
+
+#include <asm/arch/clock.h>
+#include <asm/arch/iomux.h>
+#include <asm/arch/imx-regs.h>
+#include <asm/arch/crm_regs.h>
+#include <asm/arch/mx6ul_pins.h>
+#include <asm/arch/mx6-pins.h>
+#include <asm/arch/sys_proto.h>
+#include <asm/gpio.h>
+#include <asm/imx-common/iomux-v3.h>
+#include <asm/imx-common/boot_mode.h>
+#include <asm/io.h>
+#include <common.h>
+#include <fsl_esdhc.h>
+#include <linux/sizes.h>
+#include <linux/fb.h>
+#include <mach/litesom.h>
+#include <miiphy.h>
+#include <mmc.h>
+#include <netdev.h>
+#include <spl.h>
+#include <usb.h>
+#include <usb/ehci-ci.h>
+
+DECLARE_GLOBAL_DATA_PTR;
+
+#define UART_PAD_CTRL (PAD_CTL_PKE | PAD_CTL_PUE | \
+ PAD_CTL_PUS_100K_UP | PAD_CTL_SPEED_MED | \
+ PAD_CTL_DSE_40ohm | PAD_CTL_SRE_FAST | PAD_CTL_HYS)
+
+#define USDHC_PAD_CTRL (PAD_CTL_PKE | PAD_CTL_PUE | \
+ PAD_CTL_PUS_22K_UP | PAD_CTL_SPEED_LOW | \
+ PAD_CTL_DSE_80ohm | PAD_CTL_SRE_FAST | PAD_CTL_HYS)
+
+#define ENET_PAD_CTRL (PAD_CTL_PUS_100K_UP | PAD_CTL_PUE | \
+ PAD_CTL_SPEED_HIGH | \
+ PAD_CTL_DSE_48ohm | PAD_CTL_SRE_FAST)
+
+#define MDIO_PAD_CTRL (PAD_CTL_PUS_100K_UP | PAD_CTL_PUE | \
+ PAD_CTL_DSE_48ohm | PAD_CTL_SRE_FAST | PAD_CTL_ODE)
+
+#define ENET_CLK_PAD_CTRL (PAD_CTL_DSE_40ohm | PAD_CTL_SRE_FAST)
+
+static iomux_v3_cfg_t const uart1_pads[] = {
+ MX6_PAD_UART1_TX_DATA__UART1_DCE_TX | MUX_PAD_CTRL(UART_PAD_CTRL),
+ MX6_PAD_UART1_RX_DATA__UART1_DCE_RX | MUX_PAD_CTRL(UART_PAD_CTRL),
+};
+
+static iomux_v3_cfg_t const sd_pads[] = {
+ MX6_PAD_SD1_CLK__USDHC1_CLK | MUX_PAD_CTRL(USDHC_PAD_CTRL),
+ MX6_PAD_SD1_CMD__USDHC1_CMD | MUX_PAD_CTRL(USDHC_PAD_CTRL),
+ MX6_PAD_SD1_DATA0__USDHC1_DATA0 | MUX_PAD_CTRL(USDHC_PAD_CTRL),
+ MX6_PAD_SD1_DATA1__USDHC1_DATA1 | MUX_PAD_CTRL(USDHC_PAD_CTRL),
+ MX6_PAD_SD1_DATA2__USDHC1_DATA2 | MUX_PAD_CTRL(USDHC_PAD_CTRL),
+ MX6_PAD_SD1_DATA3__USDHC1_DATA3 | MUX_PAD_CTRL(USDHC_PAD_CTRL),
+
+ /* CD */
+ MX6_PAD_UART1_RTS_B__GPIO1_IO19 | MUX_PAD_CTRL(NO_PAD_CTRL),
+};
+
+#ifdef CONFIG_FEC_MXC
+static iomux_v3_cfg_t const fec1_pads[] = {
+ MX6_PAD_GPIO1_IO06__ENET1_MDIO | MUX_PAD_CTRL(MDIO_PAD_CTRL),
+ MX6_PAD_GPIO1_IO07__ENET1_MDC | MUX_PAD_CTRL(ENET_PAD_CTRL),
+ MX6_PAD_ENET1_TX_DATA0__ENET1_TDATA00 | MUX_PAD_CTRL(ENET_PAD_CTRL),
+ MX6_PAD_ENET1_TX_DATA1__ENET1_TDATA01 | MUX_PAD_CTRL(ENET_PAD_CTRL),
+ MX6_PAD_ENET1_TX_EN__ENET1_TX_EN | MUX_PAD_CTRL(ENET_PAD_CTRL),
+ MX6_PAD_ENET1_TX_CLK__ENET1_REF_CLK1 | MUX_PAD_CTRL(ENET_CLK_PAD_CTRL),
+ MX6_PAD_ENET1_RX_DATA0__ENET1_RDATA00 | MUX_PAD_CTRL(ENET_PAD_CTRL),
+ MX6_PAD_ENET1_RX_DATA1__ENET1_RDATA01 | MUX_PAD_CTRL(ENET_PAD_CTRL),
+ MX6_PAD_ENET1_RX_ER__ENET1_RX_ER | MUX_PAD_CTRL(ENET_PAD_CTRL),
+ MX6_PAD_ENET1_RX_EN__ENET1_RX_EN | MUX_PAD_CTRL(ENET_PAD_CTRL),
+};
+
+static void setup_iomux_fec(void)
+{
+ imx_iomux_v3_setup_multiple_pads(fec1_pads, ARRAY_SIZE(fec1_pads));
+}
+#endif
+
+static void setup_iomux_uart(void)
+{
+ imx_iomux_v3_setup_multiple_pads(uart1_pads, ARRAY_SIZE(uart1_pads));
+}
+
+#ifdef CONFIG_FSL_ESDHC
+static struct fsl_esdhc_cfg sd_cfg = {USDHC1_BASE_ADDR, 0, 4};
+
+#define SD_CD_GPIO IMX_GPIO_NR(1, 19)
+
+static int mmc_get_env_devno(void)
+{
+ u32 soc_sbmr = readl(SRC_BASE_ADDR + 0x4);
+ int dev_no;
+ u32 bootsel;
+
+ bootsel = (soc_sbmr & 0x000000FF) >> 6;
+
+ /* If not boot from sd/mmc, use default value */
+ if (bootsel != 1)
+ return CONFIG_SYS_MMC_ENV_DEV;
+
+ /* BOOT_CFG2[3] and BOOT_CFG2[4] */
+ dev_no = (soc_sbmr & 0x00001800) >> 11;
+
+ return dev_no;
+}
+
+int board_mmc_getcd(struct mmc *mmc)
+{
+ struct fsl_esdhc_cfg *cfg = (struct fsl_esdhc_cfg *)mmc->priv;
+ int ret = 0;
+
+ switch (cfg->esdhc_base) {
+ case USDHC1_BASE_ADDR:
+ ret = !gpio_get_value(SD_CD_GPIO);
+ break;
+ case USDHC2_BASE_ADDR:
+ ret = 1;
+ break;
+ }
+
+ return ret;
+}
+
+int board_mmc_init(bd_t *bis)
+{
+ int ret;
+
+ /* SD */
+ imx_iomux_v3_setup_multiple_pads(sd_pads, ARRAY_SIZE(sd_pads));
+ gpio_direction_input(SD_CD_GPIO);
+ sd_cfg.sdhc_clk = mxc_get_clock(MXC_ESDHC_CLK);
+
+ ret = fsl_esdhc_initialize(bis, &sd_cfg);
+ if (ret) {
+ printf("Warning: failed to initialize mmc dev 0 (SD)\n");
+ return ret;
+ }
+
+ return litesom_mmc_init(bis);
+}
+
+static int check_mmc_autodetect(void)
+{
+ char *autodetect_str = getenv("mmcautodetect");
+
+ if ((autodetect_str != NULL) &&
+ (strcmp(autodetect_str, "yes") == 0)) {
+ return 1;
+ }
+
+ return 0;
+}
+
+void board_late_mmc_init(void)
+{
+ char cmd[32];
+ char mmcblk[32];
+ u32 dev_no = mmc_get_env_devno();
+
+ if (!check_mmc_autodetect())
+ return;
+
+ setenv_ulong("mmcdev", dev_no);
+
+ /* Set mmcblk env */
+ sprintf(mmcblk, "/dev/mmcblk%dp2 rootwait rw",
+ dev_no);
+ setenv("mmcroot", mmcblk);
+
+ sprintf(cmd, "mmc dev %d", dev_no);
+ run_command(cmd, 0);
+}
+#endif
+
+#ifdef CONFIG_FEC_MXC
+int board_eth_init(bd_t *bis)
+{
+ setup_iomux_fec();
+
+ return fecmxc_initialize(bis);
+}
+
+static int setup_fec(void)
+{
+ struct iomuxc *const iomuxc_regs = (struct iomuxc *)IOMUXC_BASE_ADDR;
+ int ret;
+
+ /* Use 50M anatop loopback REF_CLK1 for ENET1, clear gpr1[13],
+ set gpr1[17]*/
+ clrsetbits_le32(&iomuxc_regs->gpr[1], IOMUX_GPR1_FEC1_MASK,
+ IOMUX_GPR1_FEC1_CLOCK_MUX1_SEL_MASK);
+
+ ret = enable_fec_anatop_clock(0, ENET_50MHZ);
+ if (ret)
+ return ret;
+
+ enable_enet_clk(1);
+
+ return 0;
+}
+#endif
+
+#ifdef CONFIG_USB_EHCI_MX6
+int board_usb_phy_mode(int port)
+{
+ return USB_INIT_HOST;
+}
+#endif
+
+int board_early_init_f(void)
+{
+ setup_iomux_uart();
+
+ return 0;
+}
+
+int board_init(void)
+{
+ /* Address of boot parameters */
+ gd->bd->bi_boot_params = PHYS_SDRAM + 0x100;
+
+#ifdef CONFIG_FEC_MXC
+ setup_fec();
+#endif
+
+ return 0;
+}
+
+#ifdef CONFIG_CMD_BMODE
+static const struct boot_mode board_boot_modes[] = {
+ /* 4 bit bus width */
+ {"sd", MAKE_CFGVAL(0x40, 0x20, 0x00, 0x00)},
+ {"emmc", MAKE_CFGVAL(0x60, 0x48, 0x00, 0x00)},
+ {NULL, 0},
+};
+#endif
+
+int board_late_init(void)
+{
+#ifdef CONFIG_CMD_BMODE
+ add_board_boot_modes(board_boot_modes);
+#endif
+
+#ifdef CONFIG_ENV_IS_IN_MMC
+ board_late_mmc_init();
+#endif
+
+ return 0;
+}
+
+int checkboard(void)
+{
+ puts("Board: Grinn liteBoard\n");
+
+ return 0;
+}
+
+#ifdef CONFIG_SPL_BUILD
+void board_boot_order(u32 *spl_boot_list)
+{
+ struct src *psrc = (struct src *)SRC_BASE_ADDR;
+ unsigned gpr10_boot = readl(&psrc->gpr10) & (1 << 28);
+ unsigned reg = gpr10_boot ? readl(&psrc->gpr9) : readl(&psrc->sbmr1);
+ unsigned port = (reg >> 11) & 0x1;
+
+ if (port == 0) {
+ spl_boot_list[0] = BOOT_DEVICE_MMC1;
+ spl_boot_list[1] = BOOT_DEVICE_MMC2;
+ } else {
+ spl_boot_list[0] = BOOT_DEVICE_MMC2;
+ spl_boot_list[1] = BOOT_DEVICE_MMC1;
+ }
+}
+
+void board_init_f(ulong dummy)
+{
+ litesom_init_f();
+}
+#endif
diff --git a/board/toradex/apalis_imx6/1066mhz_4x128mx16.cfg b/board/toradex/apalis_imx6/1066mhz_4x128mx16.cfg
new file mode 100644
index 0000000..5cfda26
--- /dev/null
+++ b/board/toradex/apalis_imx6/1066mhz_4x128mx16.cfg
@@ -0,0 +1,48 @@
+/*
+ * Copyright (C) 2013 Boundary Devices
+ * Copyright (C) 2014-2016 Toradex AG
+ *
+ * SPDX-License-Identifier: GPL-2.0+
+ */
+
+DATA 4, MX6_MMDC_P0_MDPDC, 0x00020036
+DATA 4, MX6_MMDC_P0_MDCFG0, 0x555A7954
+DATA 4, MX6_MMDC_P0_MDCFG1, 0xDB328F64
+DATA 4, MX6_MMDC_P0_MDCFG2, 0x01FF00DB
+DATA 4, MX6_MMDC_P0_MDRWD, 0x000026D2
+DATA 4, MX6_MMDC_P0_MDOR, 0x005A1023
+DATA 4, MX6_MMDC_P0_MDOTC, 0x09555050
+DATA 4, MX6_MMDC_P0_MDPDC, 0x00025576
+DATA 4, MX6_MMDC_P0_MDASP, 0x00000027
+DATA 4, MX6_MMDC_P0_MDCTL, 0x831A0000
+DATA 4, MX6_MMDC_P0_MDSCR, 0x04088032
+DATA 4, MX6_MMDC_P0_MDSCR, 0x00008033
+DATA 4, MX6_MMDC_P0_MDSCR, 0x00428031
+DATA 4, MX6_MMDC_P0_MDSCR, 0x19308030
+DATA 4, MX6_MMDC_P0_MDSCR, 0x04008040
+DATA 4, MX6_MMDC_P0_MPZQHWCTRL, 0xA1390003
+DATA 4, MX6_MMDC_P1_MPZQHWCTRL, 0xA1390003
+DATA 4, MX6_MMDC_P0_MDREF, 0x00005800
+DATA 4, MX6_MMDC_P0_MPODTCTRL, 0x00000000
+DATA 4, MX6_MMDC_P1_MPODTCTRL, 0x00000000
+
+DATA 4, MX6_MMDC_P0_MPDGCTRL0, 0x432A0338
+DATA 4, MX6_MMDC_P0_MPDGCTRL1, 0x03260324
+DATA 4, MX6_MMDC_P1_MPDGCTRL0, 0x43340344
+DATA 4, MX6_MMDC_P1_MPDGCTRL1, 0x031E027C
+
+DATA 4, MX6_MMDC_P0_MPRDDLCTL, 0x33272D2E
+DATA 4, MX6_MMDC_P1_MPRDDLCTL, 0x2F312B37
+
+DATA 4, MX6_MMDC_P0_MPWRDLCTL, 0x3A35433C
+DATA 4, MX6_MMDC_P1_MPWRDLCTL, 0x4336453F
+
+DATA 4, MX6_MMDC_P0_MPWLDECTRL0, 0x0009000E
+DATA 4, MX6_MMDC_P0_MPWLDECTRL1, 0x0018000B
+DATA 4, MX6_MMDC_P1_MPWLDECTRL0, 0x00060015
+DATA 4, MX6_MMDC_P1_MPWLDECTRL1, 0x0006000E
+
+DATA 4, MX6_MMDC_P0_MPMUR0, 0x00000800
+DATA 4, MX6_MMDC_P1_MPMUR0, 0x00000800
+DATA 4, MX6_MMDC_P0_MDSCR, 0x00000000
+DATA 4, MX6_MMDC_P0_MAPSR, 0x00011006
diff --git a/board/toradex/apalis_imx6/1066mhz_4x256mx16.cfg b/board/toradex/apalis_imx6/1066mhz_4x256mx16.cfg
new file mode 100644
index 0000000..3707910
--- /dev/null
+++ b/board/toradex/apalis_imx6/1066mhz_4x256mx16.cfg
@@ -0,0 +1,48 @@
+/*
+ * Copyright (C) 2013 Boundary Devices
+ * Copyright (C) 2014-2016 Toradex AG
+ *
+ * SPDX-License-Identifier: GPL-2.0+
+ */
+
+DATA 4, MX6_MMDC_P0_MDPDC, 0x00020036
+DATA 4, MX6_MMDC_P0_MDCFG0, 0x898E78f5
+DATA 4, MX6_MMDC_P0_MDCFG1, 0xff328f64
+DATA 4, MX6_MMDC_P0_MDCFG2, 0x01FF00DB
+DATA 4, MX6_MMDC_P0_MDRWD, 0x000026D2
+DATA 4, MX6_MMDC_P0_MDOR, 0x008E1023
+DATA 4, MX6_MMDC_P0_MDOTC, 0x09444040
+DATA 4, MX6_MMDC_P0_MDPDC, 0x00025576
+DATA 4, MX6_MMDC_P0_MDASP, 0x00000047
+DATA 4, MX6_MMDC_P0_MDCTL, 0x841A0000
+DATA 4, MX6_MMDC_P0_MDSCR, 0x02888032
+DATA 4, MX6_MMDC_P0_MDSCR, 0x00008033
+DATA 4, MX6_MMDC_P0_MDSCR, 0x00048031
+DATA 4, MX6_MMDC_P0_MDSCR, 0x19408030
+DATA 4, MX6_MMDC_P0_MDSCR, 0x04008040
+DATA 4, MX6_MMDC_P0_MPZQHWCTRL, 0xA1390003
+DATA 4, MX6_MMDC_P1_MPZQHWCTRL, 0xA1390003
+DATA 4, MX6_MMDC_P0_MDREF, 0x00007800
+DATA 4, MX6_MMDC_P0_MPODTCTRL, 0x00022227
+DATA 4, MX6_MMDC_P1_MPODTCTRL, 0x00022227
+
+DATA 4, MX6_MMDC_P0_MPDGCTRL0, 0x03300338
+DATA 4, MX6_MMDC_P0_MPDGCTRL1, 0x03240324
+DATA 4, MX6_MMDC_P1_MPDGCTRL0, 0x03440350
+DATA 4, MX6_MMDC_P1_MPDGCTRL1, 0x032C0308
+
+DATA 4, MX6_MMDC_P0_MPRDDLCTL, 0x40363C3E
+DATA 4, MX6_MMDC_P1_MPRDDLCTL, 0x3C3E3C46
+
+DATA 4, MX6_MMDC_P0_MPWRDLCTL, 0x403E463E
+DATA 4, MX6_MMDC_P1_MPWRDLCTL, 0x4A384C46
+
+DATA 4, MX6_MMDC_P0_MPWLDECTRL0, 0x0009000E
+DATA 4, MX6_MMDC_P0_MPWLDECTRL1, 0x0018000B
+DATA 4, MX6_MMDC_P1_MPWLDECTRL0, 0x00060015
+DATA 4, MX6_MMDC_P1_MPWLDECTRL1, 0x0006000E
+
+DATA 4, MX6_MMDC_P0_MPMUR0, 0x00000800
+DATA 4, MX6_MMDC_P1_MPMUR0, 0x00000800
+DATA 4, MX6_MMDC_P0_MDSCR, 0x00000000
+DATA 4, MX6_MMDC_P0_MAPSR, 0x00011006
diff --git a/board/toradex/apalis_imx6/Kconfig b/board/toradex/apalis_imx6/Kconfig
new file mode 100644
index 0000000..14f8c10
--- /dev/null
+++ b/board/toradex/apalis_imx6/Kconfig
@@ -0,0 +1,55 @@
+if TARGET_APALIS_IMX6
+
+config SYS_BOARD
+ default "apalis_imx6"
+
+config SYS_CONFIG_NAME
+ default "apalis_imx6"
+
+config SYS_CPU
+ default "armv7"
+
+config SYS_SOC
+ default "mx6"
+
+config SYS_VENDOR
+ default "toradex"
+
+config TDX_CFG_BLOCK
+ default y
+
+config TDX_HAVE_MMC
+ default y
+
+config TDX_CFG_BLOCK_DEV
+ default "0"
+
+config TDX_CFG_BLOCK_PART
+ default "1"
+
+# Toradex config block in eMMC, at the end of 1st "boot sector"
+config TDX_CFG_BLOCK_OFFSET
+ default "-512"
+
+config TDX_CMD_IMX_MFGR
+ bool "Enable factory testing commands for Toradex iMX 6 modules"
+ help
+ This adds the commands
+ pf0100_otp_prog - Program the OTP fuses on the PMIC PF0100
+ If executed on already fused modules it doesn't change any fuse setting.
+ default y
+
+config TDX_APALIS_IMX6_V1_0
+ bool "Apalis iMX6 V1.0 HW"
+ help
+ Apalis iMX6 V1.0 HW has a different pinout for the UART.
+ The UARTs must be used in DCE mode, RTS/CTS are swapped and
+ thus unusable on standard carrier boards.
+ This option configures DCE mode unconditionally. Whithout this
+ option the config block stating V1.0 HW selects DCE mode,
+ otherwise the UARTs are configuered in DTE mode.
+ default n
+
+source "board/toradex/common/Kconfig"
+
+endif
diff --git a/board/toradex/apalis_imx6/MAINTAINERS b/board/toradex/apalis_imx6/MAINTAINERS
new file mode 100644
index 0000000..2c70ab4
--- /dev/null
+++ b/board/toradex/apalis_imx6/MAINTAINERS
@@ -0,0 +1,9 @@
+Apalis iMX6
+M: Max Krummenacher <max.krummenacher@toradex.com>
+W: http://developer.toradex.com/software/linux/linux-software
+S: Maintained
+F: board/toradex/apalis_imx6/
+F: include/configs/apalis_imx6.h
+F: configs/apalis_imx6_defconfig
+F: configs/apalis_imx6_nospl_com_defconfig
+F: configs/apalis_imx6_nospl_it_defconfig
diff --git a/board/toradex/apalis_imx6/Makefile b/board/toradex/apalis_imx6/Makefile
new file mode 100644
index 0000000..128f179
--- /dev/null
+++ b/board/toradex/apalis_imx6/Makefile
@@ -0,0 +1,5 @@
+# Copyright (c) 2012-2014 Toradex, Inc.
+# SPDX-License-Identifier: GPL-2.0+
+
+obj-y := apalis_imx6.o do_fuse.o
+obj-$(CONFIG_TDX_CMD_IMX_MFGR) += pf0100.o
diff --git a/board/toradex/apalis_imx6/apalis_imx6.c b/board/toradex/apalis_imx6/apalis_imx6.c
new file mode 100644
index 0000000..09bebeb
--- /dev/null
+++ b/board/toradex/apalis_imx6/apalis_imx6.c
@@ -0,0 +1,1292 @@
+/*
+ * Copyright (C) 2010-2013 Freescale Semiconductor, Inc.
+ * Copyright (C) 2013, Boundary Devices <info@boundarydevices.com>
+ * Copyright (C) 2014-2016, Toradex AG
+ * copied from nitrogen6x
+ *
+ * SPDX-License-Identifier: GPL-2.0+
+ */
+
+#include <common.h>
+#include <asm/arch/clock.h>
+#include <asm/arch/crm_regs.h>
+#include <asm/arch/mxc_hdmi.h>
+#include <asm/arch/imx-regs.h>
+#include <asm/arch/iomux.h>
+#include <asm/arch/sys_proto.h>
+#include <asm/arch/mx6-pins.h>
+#include <asm/arch/mx6-ddr.h>
+#include <asm/bootm.h>
+#include <asm/gpio.h>
+#include <asm/io.h>
+#include <asm/imx-common/iomux-v3.h>
+#include <asm/imx-common/mxc_i2c.h>
+#include <asm/imx-common/sata.h>
+#include <asm/imx-common/boot_mode.h>
+#include <asm/imx-common/video.h>
+#include <dm/platform_data/serial_mxc.h>
+#include <dm/platdata.h>
+#include <fsl_esdhc.h>
+#include <i2c.h>
+#include <imx_thermal.h>
+#include <linux/errno.h>
+#include <malloc.h>
+#include <mmc.h>
+#include <micrel.h>
+#include <miiphy.h>
+#include <netdev.h>
+
+#include "../common/tdx-cfg-block.h"
+#ifdef CONFIG_TDX_CMD_IMX_MFGR
+#include "pf0100.h"
+#endif
+
+DECLARE_GLOBAL_DATA_PTR;
+
+#define UART_PAD_CTRL (PAD_CTL_PUS_100K_UP | \
+ PAD_CTL_SPEED_MED | PAD_CTL_DSE_40ohm | \
+ PAD_CTL_SRE_FAST | PAD_CTL_HYS)
+
+#define USDHC_PAD_CTRL (PAD_CTL_PUS_47K_UP | \
+ PAD_CTL_SPEED_LOW | PAD_CTL_DSE_80ohm | \
+ PAD_CTL_SRE_FAST | PAD_CTL_HYS)
+
+#define ENET_PAD_CTRL (PAD_CTL_PUS_100K_UP | \
+ PAD_CTL_SPEED_MED | PAD_CTL_DSE_40ohm | PAD_CTL_HYS)
+
+#define SPI_PAD_CTRL (PAD_CTL_HYS | PAD_CTL_SPEED_MED | \
+ PAD_CTL_DSE_40ohm | PAD_CTL_SRE_FAST)
+
+#define BUTTON_PAD_CTRL (PAD_CTL_PUS_100K_UP | \
+ PAD_CTL_SPEED_MED | PAD_CTL_DSE_40ohm | PAD_CTL_HYS)
+
+#define I2C_PAD_CTRL (PAD_CTL_PUS_100K_UP | \
+ PAD_CTL_SPEED_MED | PAD_CTL_DSE_40ohm | PAD_CTL_HYS | \
+ PAD_CTL_ODE | PAD_CTL_SRE_FAST)
+
+#define WEAK_PULLUP (PAD_CTL_PUS_100K_UP | \
+ PAD_CTL_SPEED_MED | PAD_CTL_DSE_40ohm | PAD_CTL_HYS | \
+ PAD_CTL_SRE_SLOW)
+
+#define NO_PULLUP ( \
+ PAD_CTL_SPEED_MED | PAD_CTL_DSE_40ohm | PAD_CTL_HYS | \
+ PAD_CTL_SRE_SLOW)
+
+#define WEAK_PULLDOWN (PAD_CTL_PUS_100K_DOWN | \
+ PAD_CTL_SPEED_MED | PAD_CTL_DSE_40ohm | \
+ PAD_CTL_HYS | PAD_CTL_SRE_SLOW)
+
+#define TRISTATE (PAD_CTL_HYS | PAD_CTL_SPEED_MED)
+
+#define OUTPUT_40OHM (PAD_CTL_SPEED_MED|PAD_CTL_DSE_40ohm)
+
+#define OUTPUT_RGB (PAD_CTL_SPEED_MED|PAD_CTL_DSE_60ohm|PAD_CTL_SRE_FAST)
+
+int dram_init(void)
+{
+ /* use the DDR controllers configured size */
+ gd->ram_size = get_ram_size((void *)CONFIG_SYS_SDRAM_BASE,
+ (ulong)imx_ddr_size());
+
+ return 0;
+}
+
+/* Apalis UART1 */
+iomux_v3_cfg_t const uart1_pads_dce[] = {
+ MX6_PAD_CSI0_DAT10__UART1_TX_DATA | MUX_PAD_CTRL(UART_PAD_CTRL),
+ MX6_PAD_CSI0_DAT11__UART1_RX_DATA | MUX_PAD_CTRL(UART_PAD_CTRL),
+};
+iomux_v3_cfg_t const uart1_pads_dte[] = {
+ MX6_PAD_CSI0_DAT10__UART1_RX_DATA | MUX_PAD_CTRL(UART_PAD_CTRL),
+ MX6_PAD_CSI0_DAT11__UART1_TX_DATA | MUX_PAD_CTRL(UART_PAD_CTRL),
+};
+
+#define PC MUX_PAD_CTRL(I2C_PAD_CTRL)
+/* Apalis I2C1 */
+struct i2c_pads_info i2c_pad_info1 = {
+ .scl = {
+ .i2c_mode = MX6_PAD_CSI0_DAT9__I2C1_SCL | PC,
+ .gpio_mode = MX6_PAD_CSI0_DAT9__GPIO5_IO27 | PC,
+ .gp = IMX_GPIO_NR(5, 27)
+ },
+ .sda = {
+ .i2c_mode = MX6_PAD_CSI0_DAT8__I2C1_SDA | PC,
+ .gpio_mode = MX6_PAD_CSI0_DAT8__GPIO5_IO26 | PC,
+ .gp = IMX_GPIO_NR(5, 26)
+ }
+};
+
+/* Apalis local, PMIC, SGTL5000, STMPE811 */
+struct i2c_pads_info i2c_pad_info_loc = {
+ .scl = {
+ .i2c_mode = MX6_PAD_KEY_COL3__I2C2_SCL | PC,
+ .gpio_mode = MX6_PAD_KEY_COL3__GPIO4_IO12 | PC,
+ .gp = IMX_GPIO_NR(4, 12)
+ },
+ .sda = {
+ .i2c_mode = MX6_PAD_KEY_ROW3__I2C2_SDA | PC,
+ .gpio_mode = MX6_PAD_KEY_ROW3__GPIO4_IO13 | PC,
+ .gp = IMX_GPIO_NR(4, 13)
+ }
+};
+
+/* Apalis I2C3 / CAM */
+struct i2c_pads_info i2c_pad_info3 = {
+ .scl = {
+ .i2c_mode = MX6_PAD_EIM_D17__I2C3_SCL | PC,
+ .gpio_mode = MX6_PAD_EIM_D17__GPIO3_IO17 | PC,
+ .gp = IMX_GPIO_NR(3, 17)
+ },
+ .sda = {
+ .i2c_mode = MX6_PAD_EIM_D18__I2C3_SDA | PC,
+ .gpio_mode = MX6_PAD_EIM_D18__GPIO3_IO18 | PC,
+ .gp = IMX_GPIO_NR(3, 18)
+ }
+};
+
+/* Apalis I2C2 / DDC */
+struct i2c_pads_info i2c_pad_info_ddc = {
+ .scl = {
+ .i2c_mode = MX6_PAD_EIM_EB2__HDMI_TX_DDC_SCL | PC,
+ .gpio_mode = MX6_PAD_EIM_EB2__GPIO2_IO30 | PC,
+ .gp = IMX_GPIO_NR(2, 30)
+ },
+ .sda = {
+ .i2c_mode = MX6_PAD_EIM_D16__HDMI_TX_DDC_SDA | PC,
+ .gpio_mode = MX6_PAD_EIM_D16__GPIO3_IO16 | PC,
+ .gp = IMX_GPIO_NR(3, 16)
+ }
+};
+
+/* Apalis MMC1 */
+iomux_v3_cfg_t const usdhc1_pads[] = {
+ MX6_PAD_SD1_CLK__SD1_CLK | MUX_PAD_CTRL(USDHC_PAD_CTRL),
+ MX6_PAD_SD1_CMD__SD1_CMD | MUX_PAD_CTRL(USDHC_PAD_CTRL),
+ MX6_PAD_SD1_DAT0__SD1_DATA0 | MUX_PAD_CTRL(USDHC_PAD_CTRL),
+ MX6_PAD_SD1_DAT1__SD1_DATA1 | MUX_PAD_CTRL(USDHC_PAD_CTRL),
+ MX6_PAD_SD1_DAT2__SD1_DATA2 | MUX_PAD_CTRL(USDHC_PAD_CTRL),
+ MX6_PAD_SD1_DAT3__SD1_DATA3 | MUX_PAD_CTRL(USDHC_PAD_CTRL),
+ MX6_PAD_NANDF_D0__SD1_DATA4 | MUX_PAD_CTRL(USDHC_PAD_CTRL),
+ MX6_PAD_NANDF_D1__SD1_DATA5 | MUX_PAD_CTRL(USDHC_PAD_CTRL),
+ MX6_PAD_NANDF_D2__SD1_DATA6 | MUX_PAD_CTRL(USDHC_PAD_CTRL),
+ MX6_PAD_NANDF_D3__SD1_DATA7 | MUX_PAD_CTRL(USDHC_PAD_CTRL),
+ MX6_PAD_DI0_PIN4__GPIO4_IO20 | MUX_PAD_CTRL(NO_PAD_CTRL), /* CD */
+# define GPIO_MMC_CD IMX_GPIO_NR(4, 20)
+};
+
+/* Apalis SD1 */
+iomux_v3_cfg_t const usdhc2_pads[] = {
+ MX6_PAD_SD2_CLK__SD2_CLK | MUX_PAD_CTRL(USDHC_PAD_CTRL),
+ MX6_PAD_SD2_CMD__SD2_CMD | MUX_PAD_CTRL(USDHC_PAD_CTRL),
+ MX6_PAD_SD2_DAT0__SD2_DATA0 | MUX_PAD_CTRL(USDHC_PAD_CTRL),
+ MX6_PAD_SD2_DAT1__SD2_DATA1 | MUX_PAD_CTRL(USDHC_PAD_CTRL),
+ MX6_PAD_SD2_DAT2__SD2_DATA2 | MUX_PAD_CTRL(USDHC_PAD_CTRL),
+ MX6_PAD_SD2_DAT3__SD2_DATA3 | MUX_PAD_CTRL(USDHC_PAD_CTRL),
+ MX6_PAD_NANDF_CS1__GPIO6_IO14 | MUX_PAD_CTRL(NO_PAD_CTRL), /* CD */
+# define GPIO_SD_CD IMX_GPIO_NR(6, 14)
+};
+
+/* eMMC */
+iomux_v3_cfg_t const usdhc3_pads[] = {
+ MX6_PAD_SD3_CLK__SD3_CLK | MUX_PAD_CTRL(USDHC_PAD_CTRL),
+ MX6_PAD_SD3_CMD__SD3_CMD | MUX_PAD_CTRL(USDHC_PAD_CTRL),
+ MX6_PAD_SD3_DAT0__SD3_DATA0 | MUX_PAD_CTRL(USDHC_PAD_CTRL),
+ MX6_PAD_SD3_DAT1__SD3_DATA1 | MUX_PAD_CTRL(USDHC_PAD_CTRL),
+ MX6_PAD_SD3_DAT2__SD3_DATA2 | MUX_PAD_CTRL(USDHC_PAD_CTRL),
+ MX6_PAD_SD3_DAT3__SD3_DATA3 | MUX_PAD_CTRL(USDHC_PAD_CTRL),
+ MX6_PAD_SD3_DAT4__SD3_DATA4 | MUX_PAD_CTRL(USDHC_PAD_CTRL),
+ MX6_PAD_SD3_DAT5__SD3_DATA5 | MUX_PAD_CTRL(USDHC_PAD_CTRL),
+ MX6_PAD_SD3_DAT6__SD3_DATA6 | MUX_PAD_CTRL(USDHC_PAD_CTRL),
+ MX6_PAD_SD3_DAT7__SD3_DATA7 | MUX_PAD_CTRL(USDHC_PAD_CTRL),
+ MX6_PAD_SD3_RST__GPIO7_IO08 | MUX_PAD_CTRL(WEAK_PULLUP),
+};
+
+int mx6_rgmii_rework(struct phy_device *phydev)
+{
+ /* control data pad skew - devaddr = 0x02, register = 0x04 */
+ ksz9031_phy_extended_write(phydev, 0x02,
+ MII_KSZ9031_EXT_RGMII_CTRL_SIG_SKEW,
+ MII_KSZ9031_MOD_DATA_NO_POST_INC, 0x0000);
+ /* rx data pad skew - devaddr = 0x02, register = 0x05 */
+ ksz9031_phy_extended_write(phydev, 0x02,
+ MII_KSZ9031_EXT_RGMII_RX_DATA_SKEW,
+ MII_KSZ9031_MOD_DATA_NO_POST_INC, 0x0000);
+ /* tx data pad skew - devaddr = 0x02, register = 0x05 */
+ ksz9031_phy_extended_write(phydev, 0x02,
+ MII_KSZ9031_EXT_RGMII_TX_DATA_SKEW,
+ MII_KSZ9031_MOD_DATA_NO_POST_INC, 0x0000);
+ /* gtx and rx clock pad skew - devaddr = 0x02, register = 0x08 */
+ ksz9031_phy_extended_write(phydev, 0x02,
+ MII_KSZ9031_EXT_RGMII_CLOCK_SKEW,
+ MII_KSZ9031_MOD_DATA_NO_POST_INC, 0x03FF);
+ return 0;
+}
+
+iomux_v3_cfg_t const enet_pads[] = {
+ MX6_PAD_ENET_MDIO__ENET_MDIO | MUX_PAD_CTRL(ENET_PAD_CTRL),
+ MX6_PAD_ENET_MDC__ENET_MDC | MUX_PAD_CTRL(ENET_PAD_CTRL),
+ MX6_PAD_RGMII_TXC__RGMII_TXC | MUX_PAD_CTRL(ENET_PAD_CTRL),
+ MX6_PAD_RGMII_TD0__RGMII_TD0 | MUX_PAD_CTRL(ENET_PAD_CTRL),
+ MX6_PAD_RGMII_TD1__RGMII_TD1 | MUX_PAD_CTRL(ENET_PAD_CTRL),
+ MX6_PAD_RGMII_TD2__RGMII_TD2 | MUX_PAD_CTRL(ENET_PAD_CTRL),
+ MX6_PAD_RGMII_TD3__RGMII_TD3 | MUX_PAD_CTRL(ENET_PAD_CTRL),
+ MX6_PAD_RGMII_TX_CTL__RGMII_TX_CTL | MUX_PAD_CTRL(ENET_PAD_CTRL),
+ MX6_PAD_ENET_REF_CLK__ENET_TX_CLK | MUX_PAD_CTRL(ENET_PAD_CTRL),
+ MX6_PAD_RGMII_RXC__RGMII_RXC | MUX_PAD_CTRL(ENET_PAD_CTRL),
+ MX6_PAD_RGMII_RD0__RGMII_RD0 | MUX_PAD_CTRL(ENET_PAD_CTRL),
+ MX6_PAD_RGMII_RD1__RGMII_RD1 | MUX_PAD_CTRL(ENET_PAD_CTRL),
+ MX6_PAD_RGMII_RD2__RGMII_RD2 | MUX_PAD_CTRL(ENET_PAD_CTRL),
+ MX6_PAD_RGMII_RD3__RGMII_RD3 | MUX_PAD_CTRL(ENET_PAD_CTRL),
+ MX6_PAD_RGMII_RX_CTL__RGMII_RX_CTL | MUX_PAD_CTRL(ENET_PAD_CTRL),
+ /* KSZ9031 PHY Reset */
+ MX6_PAD_ENET_CRS_DV__GPIO1_IO25 | MUX_PAD_CTRL(NO_PAD_CTRL),
+# define GPIO_ENET_PHY_RESET IMX_GPIO_NR(1, 25)
+};
+
+static void setup_iomux_enet(void)
+{
+ imx_iomux_v3_setup_multiple_pads(enet_pads, ARRAY_SIZE(enet_pads));
+}
+
+static int reset_enet_phy(struct mii_dev *bus)
+{
+ /* Reset KSZ9031 PHY */
+ gpio_direction_output(GPIO_ENET_PHY_RESET, 0);
+ mdelay(10);
+ gpio_set_value(GPIO_ENET_PHY_RESET, 1);
+
+ return 0;
+}
+
+/* mux the Apalis GPIO pins, so they can be used from the U-Boot cmdline */
+iomux_v3_cfg_t const gpio_pads[] = {
+ /* Apalis GPIO1 - GPIO8 */
+ MX6_PAD_NANDF_D4__GPIO2_IO04 | MUX_PAD_CTRL(WEAK_PULLUP),
+ MX6_PAD_NANDF_D5__GPIO2_IO05 | MUX_PAD_CTRL(WEAK_PULLUP),
+ MX6_PAD_NANDF_D6__GPIO2_IO06 | MUX_PAD_CTRL(WEAK_PULLUP),
+ MX6_PAD_NANDF_D7__GPIO2_IO07 | MUX_PAD_CTRL(WEAK_PULLUP),
+ MX6_PAD_NANDF_RB0__GPIO6_IO10 | MUX_PAD_CTRL(WEAK_PULLUP),
+ MX6_PAD_NANDF_WP_B__GPIO6_IO09 | MUX_PAD_CTRL(WEAK_PULLUP),
+ MX6_PAD_GPIO_2__GPIO1_IO02 | MUX_PAD_CTRL(WEAK_PULLDOWN),
+ MX6_PAD_GPIO_6__GPIO1_IO06 | MUX_PAD_CTRL(WEAK_PULLUP),
+ MX6_PAD_GPIO_4__GPIO1_IO04 | MUX_PAD_CTRL(WEAK_PULLUP),
+};
+
+static void setup_iomux_gpio(void)
+{
+ imx_iomux_v3_setup_multiple_pads(gpio_pads, ARRAY_SIZE(gpio_pads));
+}
+
+iomux_v3_cfg_t const usb_pads[] = {
+ /* USBH_EN */
+ MX6_PAD_GPIO_0__GPIO1_IO00 | MUX_PAD_CTRL(NO_PAD_CTRL),
+# define GPIO_USBH_EN IMX_GPIO_NR(1, 0)
+ /* USB_VBUS_DET */
+ MX6_PAD_EIM_D28__GPIO3_IO28 | MUX_PAD_CTRL(NO_PAD_CTRL),
+# define GPIO_USB_VBUS_DET IMX_GPIO_NR(3, 28)
+ /* USBO1_ID */
+ MX6_PAD_ENET_RX_ER__USB_OTG_ID | MUX_PAD_CTRL(WEAK_PULLUP),
+ /* USBO1_EN */
+ MX6_PAD_EIM_D22__GPIO3_IO22 | MUX_PAD_CTRL(NO_PAD_CTRL),
+# define GPIO_USBO_EN IMX_GPIO_NR(3, 22)
+};
+
+/*
+ * UARTs are used in DTE mode, switch the mode on all UARTs before
+ * any pinmuxing connects a (DCE) output to a transceiver output.
+ */
+#define UFCR 0x90 /* FIFO Control Register */
+#define UFCR_DCEDTE (1<<6) /* DCE=0 */
+
+static void setup_dtemode_uart(void)
+{
+ setbits_le32((u32 *)(UART1_BASE + UFCR), UFCR_DCEDTE);
+ setbits_le32((u32 *)(UART2_BASE + UFCR), UFCR_DCEDTE);
+ setbits_le32((u32 *)(UART4_BASE + UFCR), UFCR_DCEDTE);
+ setbits_le32((u32 *)(UART5_BASE + UFCR), UFCR_DCEDTE);
+}
+static void setup_dcemode_uart(void)
+{
+ clrbits_le32((u32 *)(UART1_BASE + UFCR), UFCR_DCEDTE);
+ clrbits_le32((u32 *)(UART2_BASE + UFCR), UFCR_DCEDTE);
+ clrbits_le32((u32 *)(UART4_BASE + UFCR), UFCR_DCEDTE);
+ clrbits_le32((u32 *)(UART5_BASE + UFCR), UFCR_DCEDTE);
+}
+
+static void setup_iomux_dte_uart(void)
+{
+ setup_dtemode_uart();
+ imx_iomux_v3_setup_multiple_pads(uart1_pads_dte,
+ ARRAY_SIZE(uart1_pads_dte));
+}
+
+static void setup_iomux_dce_uart(void)
+{
+ setup_dcemode_uart();
+ imx_iomux_v3_setup_multiple_pads(uart1_pads_dce,
+ ARRAY_SIZE(uart1_pads_dce));
+}
+
+#ifdef CONFIG_USB_EHCI_MX6
+int board_ehci_hcd_init(int port)
+{
+ imx_iomux_v3_setup_multiple_pads(usb_pads, ARRAY_SIZE(usb_pads));
+ return 0;
+}
+
+int board_ehci_power(int port, int on)
+{
+ switch (port) {
+ case 0:
+ /* control OTG power */
+ gpio_direction_output(GPIO_USBO_EN, on);
+ mdelay(100);
+ break;
+ case 1:
+ /* Control MXM USBH */
+ gpio_direction_output(GPIO_USBH_EN, on);
+ mdelay(2);
+ /* Control onboard USB Hub VBUS */
+ gpio_direction_output(GPIO_USB_VBUS_DET, on);
+ mdelay(100);
+ break;
+ default:
+ break;
+ }
+ return 0;
+}
+#endif
+
+#ifdef CONFIG_FSL_ESDHC
+/* use the following sequence: eMMC, MMC, SD */
+struct fsl_esdhc_cfg usdhc_cfg[CONFIG_SYS_FSL_USDHC_NUM] = {
+ {USDHC3_BASE_ADDR},
+ {USDHC1_BASE_ADDR},
+ {USDHC2_BASE_ADDR},
+};
+
+int board_mmc_getcd(struct mmc *mmc)
+{
+ struct fsl_esdhc_cfg *cfg = (struct fsl_esdhc_cfg *)mmc->priv;
+ int ret = true; /* default: assume inserted */
+
+ switch (cfg->esdhc_base) {
+ case USDHC1_BASE_ADDR:
+ gpio_direction_input(GPIO_MMC_CD);
+ ret = !gpio_get_value(GPIO_MMC_CD);
+ break;
+ case USDHC2_BASE_ADDR:
+ gpio_direction_input(GPIO_SD_CD);
+ ret = !gpio_get_value(GPIO_SD_CD);
+ break;
+ }
+
+ return ret;
+}
+
+int board_mmc_init(bd_t *bis)
+{
+#ifndef CONFIG_SPL_BUILD
+ s32 status = 0;
+ u32 index = 0;
+
+ usdhc_cfg[0].sdhc_clk = mxc_get_clock(MXC_ESDHC3_CLK);
+ usdhc_cfg[1].sdhc_clk = mxc_get_clock(MXC_ESDHC_CLK);
+ usdhc_cfg[2].sdhc_clk = mxc_get_clock(MXC_ESDHC2_CLK);
+
+ usdhc_cfg[0].max_bus_width = 8;
+ usdhc_cfg[1].max_bus_width = 8;
+ usdhc_cfg[2].max_bus_width = 4;
+
+ for (index = 0; index < CONFIG_SYS_FSL_USDHC_NUM; ++index) {
+ switch (index) {
+ case 0:
+ imx_iomux_v3_setup_multiple_pads(
+ usdhc3_pads, ARRAY_SIZE(usdhc3_pads));
+ break;
+ case 1:
+ imx_iomux_v3_setup_multiple_pads(
+ usdhc1_pads, ARRAY_SIZE(usdhc1_pads));
+ break;
+ case 2:
+ imx_iomux_v3_setup_multiple_pads(
+ usdhc2_pads, ARRAY_SIZE(usdhc2_pads));
+ break;
+ default:
+ printf("Warning: you configured more USDHC controllers (%d) then supported by the board (%d)\n",
+ index + 1, CONFIG_SYS_FSL_USDHC_NUM);
+ return status;
+ }
+
+ status |= fsl_esdhc_initialize(bis, &usdhc_cfg[index]);
+ }
+
+ return status;
+#else
+ struct src *psrc = (struct src *)SRC_BASE_ADDR;
+ unsigned reg = readl(&psrc->sbmr1) >> 11;
+ /*
+ * Upon reading BOOT_CFG register the following map is done:
+ * Bit 11 and 12 of BOOT_CFG register can determine the current
+ * mmc port
+ * 0x1 SD1
+ * 0x2 SD2
+ * 0x3 SD4
+ */
+
+ switch (reg & 0x3) {
+ case 0x0:
+ imx_iomux_v3_setup_multiple_pads(
+ usdhc1_pads, ARRAY_SIZE(usdhc1_pads));
+ usdhc_cfg[0].esdhc_base = USDHC1_BASE_ADDR;
+ usdhc_cfg[0].sdhc_clk = mxc_get_clock(MXC_ESDHC_CLK);
+ gd->arch.sdhc_clk = usdhc_cfg[0].sdhc_clk;
+ break;
+ case 0x1:
+ imx_iomux_v3_setup_multiple_pads(
+ usdhc2_pads, ARRAY_SIZE(usdhc2_pads));
+ usdhc_cfg[0].esdhc_base = USDHC2_BASE_ADDR;
+ usdhc_cfg[0].sdhc_clk = mxc_get_clock(MXC_ESDHC2_CLK);
+ gd->arch.sdhc_clk = usdhc_cfg[0].sdhc_clk;
+ break;
+ case 0x2:
+ imx_iomux_v3_setup_multiple_pads(
+ usdhc3_pads, ARRAY_SIZE(usdhc3_pads));
+ usdhc_cfg[0].esdhc_base = USDHC3_BASE_ADDR;
+ usdhc_cfg[0].sdhc_clk = mxc_get_clock(MXC_ESDHC3_CLK);
+ gd->arch.sdhc_clk = usdhc_cfg[0].sdhc_clk;
+ break;
+ default:
+ puts("MMC boot device not available");
+ }
+
+ return fsl_esdhc_initialize(bis, &usdhc_cfg[0]);
+#endif
+}
+#endif
+
+int board_phy_config(struct phy_device *phydev)
+{
+ mx6_rgmii_rework(phydev);
+ if (phydev->drv->config)
+ phydev->drv->config(phydev);
+
+ return 0;
+}
+
+int board_eth_init(bd_t *bis)
+{
+ uint32_t base = IMX_FEC_BASE;
+ struct mii_dev *bus = NULL;
+ struct phy_device *phydev = NULL;
+ int ret;
+
+ setup_iomux_enet();
+
+#ifdef CONFIG_FEC_MXC
+ bus = fec_get_miibus(base, -1);
+ if (!bus)
+ return 0;
+ bus->reset = reset_enet_phy;
+ /* scan PHY 4,5,6,7 */
+ phydev = phy_find_by_mask(bus, (0xf << 4), PHY_INTERFACE_MODE_RGMII);
+ if (!phydev) {
+ free(bus);
+ puts("no PHY found\n");
+ return 0;
+ }
+ printf("using PHY at %d\n", phydev->addr);
+ ret = fec_probe(bis, -1, base, bus, phydev);
+ if (ret) {
+ printf("FEC MXC: %s:failed\n", __func__);
+ free(phydev);
+ free(bus);
+ }
+#endif
+ return 0;
+}
+
+static iomux_v3_cfg_t const pwr_intb_pads[] = {
+ /*
+ * the bootrom sets the iomux to vselect, potentially connecting
+ * two outputs. Set this back to GPIO
+ */
+ MX6_PAD_GPIO_18__GPIO7_IO13 | MUX_PAD_CTRL(NO_PAD_CTRL)
+};
+
+#if defined(CONFIG_VIDEO_IPUV3)
+
+static iomux_v3_cfg_t const backlight_pads[] = {
+ /* Backlight on RGB connector: J15 */
+ MX6_PAD_EIM_DA13__GPIO3_IO13 | MUX_PAD_CTRL(NO_PAD_CTRL),
+#define RGB_BACKLIGHT_GP IMX_GPIO_NR(3, 13)
+ /* additional CPU pin on BKL_PWM, keep in tristate */
+ MX6_PAD_EIM_DA14__GPIO3_IO14 | MUX_PAD_CTRL(TRISTATE),
+ /* Backlight PWM, used as GPIO in U-Boot */
+ MX6_PAD_SD4_DAT2__GPIO2_IO10 | MUX_PAD_CTRL(NO_PAD_CTRL),
+#define RGB_BACKLIGHTPWM_GP IMX_GPIO_NR(2, 10)
+ /* buffer output enable 0: buffer enabled */
+ MX6_PAD_EIM_A25__GPIO5_IO02 | MUX_PAD_CTRL(WEAK_PULLUP),
+#define RGB_BACKLIGHTPWM_OE IMX_GPIO_NR(5, 2)
+ /* PSAVE# integrated VDAC */
+ MX6_PAD_EIM_BCLK__GPIO6_IO31 | MUX_PAD_CTRL(NO_PAD_CTRL),
+#define VGA_PSAVE_NOT_GP IMX_GPIO_NR(6, 31)
+};
+
+static iomux_v3_cfg_t const rgb_pads[] = {
+ MX6_PAD_EIM_A16__IPU1_DI1_DISP_CLK | MUX_PAD_CTRL(OUTPUT_RGB),
+ MX6_PAD_EIM_DA10__IPU1_DI1_PIN15 | MUX_PAD_CTRL(OUTPUT_RGB),
+ MX6_PAD_EIM_DA11__IPU1_DI1_PIN02 | MUX_PAD_CTRL(OUTPUT_RGB),
+ MX6_PAD_EIM_DA12__IPU1_DI1_PIN03 | MUX_PAD_CTRL(OUTPUT_RGB),
+ MX6_PAD_EIM_DA9__IPU1_DISP1_DATA00 | MUX_PAD_CTRL(OUTPUT_RGB),
+ MX6_PAD_EIM_DA8__IPU1_DISP1_DATA01 | MUX_PAD_CTRL(OUTPUT_RGB),
+ MX6_PAD_EIM_DA7__IPU1_DISP1_DATA02 | MUX_PAD_CTRL(OUTPUT_RGB),
+ MX6_PAD_EIM_DA6__IPU1_DISP1_DATA03 | MUX_PAD_CTRL(OUTPUT_RGB),
+ MX6_PAD_EIM_DA5__IPU1_DISP1_DATA04 | MUX_PAD_CTRL(OUTPUT_RGB),
+ MX6_PAD_EIM_DA4__IPU1_DISP1_DATA05 | MUX_PAD_CTRL(OUTPUT_RGB),
+ MX6_PAD_EIM_DA3__IPU1_DISP1_DATA06 | MUX_PAD_CTRL(OUTPUT_RGB),
+ MX6_PAD_EIM_DA2__IPU1_DISP1_DATA07 | MUX_PAD_CTRL(OUTPUT_RGB),
+ MX6_PAD_EIM_DA1__IPU1_DISP1_DATA08 | MUX_PAD_CTRL(OUTPUT_RGB),
+ MX6_PAD_EIM_DA0__IPU1_DISP1_DATA09 | MUX_PAD_CTRL(OUTPUT_RGB),
+ MX6_PAD_EIM_EB1__IPU1_DISP1_DATA10 | MUX_PAD_CTRL(OUTPUT_RGB),
+ MX6_PAD_EIM_EB0__IPU1_DISP1_DATA11 | MUX_PAD_CTRL(OUTPUT_RGB),
+ MX6_PAD_EIM_A17__IPU1_DISP1_DATA12 | MUX_PAD_CTRL(OUTPUT_RGB),
+ MX6_PAD_EIM_A18__IPU1_DISP1_DATA13 | MUX_PAD_CTRL(OUTPUT_RGB),
+ MX6_PAD_EIM_A19__IPU1_DISP1_DATA14 | MUX_PAD_CTRL(OUTPUT_RGB),
+ MX6_PAD_EIM_A20__IPU1_DISP1_DATA15 | MUX_PAD_CTRL(OUTPUT_RGB),
+ MX6_PAD_EIM_A21__IPU1_DISP1_DATA16 | MUX_PAD_CTRL(OUTPUT_RGB),
+ MX6_PAD_EIM_A22__IPU1_DISP1_DATA17 | MUX_PAD_CTRL(OUTPUT_RGB),
+ MX6_PAD_EIM_A23__IPU1_DISP1_DATA18 | MUX_PAD_CTRL(OUTPUT_RGB),
+ MX6_PAD_EIM_A24__IPU1_DISP1_DATA19 | MUX_PAD_CTRL(OUTPUT_RGB),
+ MX6_PAD_EIM_D26__IPU1_DISP1_DATA22 | MUX_PAD_CTRL(OUTPUT_RGB),
+ MX6_PAD_EIM_D27__IPU1_DISP1_DATA23 | MUX_PAD_CTRL(OUTPUT_RGB),
+ MX6_PAD_EIM_D30__IPU1_DISP1_DATA21 | MUX_PAD_CTRL(OUTPUT_RGB),
+ MX6_PAD_EIM_D31__IPU1_DISP1_DATA20 | MUX_PAD_CTRL(OUTPUT_RGB),
+};
+
+static iomux_v3_cfg_t const vga_pads[] = {
+#ifdef FOR_DL_SOLO
+ /* DualLite/Solo doesn't have IPU2 */
+ MX6_PAD_DI0_DISP_CLK__IPU1_DI0_DISP_CLK,
+ MX6_PAD_DI0_PIN15__IPU1_DI0_PIN15,
+ MX6_PAD_DI0_PIN2__IPU1_DI0_PIN02,
+ MX6_PAD_DI0_PIN3__IPU1_DI0_PIN03,
+ MX6_PAD_DISP0_DAT0__IPU1_DISP0_DATA00,
+ MX6_PAD_DISP0_DAT1__IPU1_DISP0_DATA01,
+ MX6_PAD_DISP0_DAT2__IPU1_DISP0_DATA02,
+ MX6_PAD_DISP0_DAT3__IPU1_DISP0_DATA03,
+ MX6_PAD_DISP0_DAT4__IPU1_DISP0_DATA04,
+ MX6_PAD_DISP0_DAT5__IPU1_DISP0_DATA05,
+ MX6_PAD_DISP0_DAT6__IPU1_DISP0_DATA06,
+ MX6_PAD_DISP0_DAT7__IPU1_DISP0_DATA07,
+ MX6_PAD_DISP0_DAT8__IPU1_DISP0_DATA08,
+ MX6_PAD_DISP0_DAT9__IPU1_DISP0_DATA09,
+ MX6_PAD_DISP0_DAT10__IPU1_DISP0_DATA10,
+ MX6_PAD_DISP0_DAT11__IPU1_DISP0_DATA11,
+ MX6_PAD_DISP0_DAT12__IPU1_DISP0_DATA12,
+ MX6_PAD_DISP0_DAT13__IPU1_DISP0_DATA13,
+ MX6_PAD_DISP0_DAT14__IPU1_DISP0_DATA14,
+ MX6_PAD_DISP0_DAT15__IPU1_DISP0_DATA15,
+#else
+ MX6_PAD_DI0_DISP_CLK__IPU1_DI0_DISP_CLK,
+ MX6_PAD_DI0_PIN15__IPU2_DI0_PIN15,
+ MX6_PAD_DI0_PIN2__IPU2_DI0_PIN02,
+ MX6_PAD_DI0_PIN3__IPU2_DI0_PIN03,
+ MX6_PAD_DISP0_DAT0__IPU2_DISP0_DATA00,
+ MX6_PAD_DISP0_DAT1__IPU2_DISP0_DATA01,
+ MX6_PAD_DISP0_DAT2__IPU2_DISP0_DATA02,
+ MX6_PAD_DISP0_DAT3__IPU2_DISP0_DATA03,
+ MX6_PAD_DISP0_DAT4__IPU2_DISP0_DATA04,
+ MX6_PAD_DISP0_DAT5__IPU2_DISP0_DATA05,
+ MX6_PAD_DISP0_DAT6__IPU2_DISP0_DATA06,
+ MX6_PAD_DISP0_DAT7__IPU2_DISP0_DATA07,
+ MX6_PAD_DISP0_DAT8__IPU2_DISP0_DATA08,
+ MX6_PAD_DISP0_DAT9__IPU2_DISP0_DATA09,
+ MX6_PAD_DISP0_DAT10__IPU2_DISP0_DATA10,
+ MX6_PAD_DISP0_DAT11__IPU2_DISP0_DATA11,
+ MX6_PAD_DISP0_DAT12__IPU2_DISP0_DATA12,
+ MX6_PAD_DISP0_DAT13__IPU2_DISP0_DATA13,
+ MX6_PAD_DISP0_DAT14__IPU2_DISP0_DATA14,
+ MX6_PAD_DISP0_DAT15__IPU2_DISP0_DATA15,
+#endif
+};
+
+static void do_enable_hdmi(struct display_info_t const *dev)
+{
+ imx_enable_hdmi_phy();
+}
+
+static int detect_i2c(struct display_info_t const *dev)
+{
+ return (0 == i2c_set_bus_num(dev->bus)) &&
+ (0 == i2c_probe(dev->addr));
+}
+
+static void enable_lvds(struct display_info_t const *dev)
+{
+ struct iomuxc *iomux = (struct iomuxc *)
+ IOMUXC_BASE_ADDR;
+ u32 reg = readl(&iomux->gpr[2]);
+ reg |= IOMUXC_GPR2_DATA_WIDTH_CH0_24BIT;
+ writel(reg, &iomux->gpr[2]);
+ gpio_direction_output(RGB_BACKLIGHT_GP, 1);
+ gpio_direction_output(RGB_BACKLIGHTPWM_GP, 0);
+ gpio_direction_output(RGB_BACKLIGHTPWM_OE, 0);
+}
+
+static void enable_rgb(struct display_info_t const *dev)
+{
+ imx_iomux_v3_setup_multiple_pads(
+ rgb_pads,
+ ARRAY_SIZE(rgb_pads));
+ gpio_direction_output(RGB_BACKLIGHT_GP, 1);
+ gpio_direction_output(RGB_BACKLIGHTPWM_GP, 0);
+ gpio_direction_output(RGB_BACKLIGHTPWM_OE, 0);
+}
+
+static int detect_default(struct display_info_t const *dev)
+{
+ (void) dev;
+ return 1;
+}
+
+struct display_info_t const displays[] = {{
+ .bus = -1,
+ .addr = 0,
+ .pixfmt = IPU_PIX_FMT_RGB24,
+ .detect = detect_hdmi,
+ .enable = do_enable_hdmi,
+ .mode = {
+ .name = "HDMI",
+ .refresh = 60,
+ .xres = 1024,
+ .yres = 768,
+ .pixclock = 15385,
+ .left_margin = 220,
+ .right_margin = 40,
+ .upper_margin = 21,
+ .lower_margin = 7,
+ .hsync_len = 60,
+ .vsync_len = 10,
+ .sync = FB_SYNC_EXT,
+ .vmode = FB_VMODE_NONINTERLACED
+} }, {
+ .bus = -1,
+ .addr = 0,
+ .di = 1,
+ .pixfmt = IPU_PIX_FMT_RGB24,
+ .detect = detect_default,
+ .enable = enable_rgb,
+ .mode = {
+ .name = "vga-rgb",
+ .refresh = 60,
+ .xres = 640,
+ .yres = 480,
+ .pixclock = 33000,
+ .left_margin = 48,
+ .right_margin = 16,
+ .upper_margin = 31,
+ .lower_margin = 11,
+ .hsync_len = 96,
+ .vsync_len = 2,
+ .sync = 0,
+ .vmode = FB_VMODE_NONINTERLACED
+} }, {
+ .bus = -1,
+ .addr = 0,
+ .di = 1,
+ .pixfmt = IPU_PIX_FMT_RGB24,
+ .enable = enable_rgb,
+ .mode = {
+ .name = "wvga-rgb",
+ .refresh = 60,
+ .xres = 800,
+ .yres = 480,
+ .pixclock = 25000,
+ .left_margin = 40,
+ .right_margin = 88,
+ .upper_margin = 33,
+ .lower_margin = 10,
+ .hsync_len = 128,
+ .vsync_len = 2,
+ .sync = 0,
+ .vmode = FB_VMODE_NONINTERLACED
+} }, {
+ .bus = -1,
+ .addr = 0,
+ .pixfmt = IPU_PIX_FMT_LVDS666,
+ .detect = detect_i2c,
+ .enable = enable_lvds,
+ .mode = {
+ .name = "wsvga-lvds",
+ .refresh = 60,
+ .xres = 1024,
+ .yres = 600,
+ .pixclock = 15385,
+ .left_margin = 220,
+ .right_margin = 40,
+ .upper_margin = 21,
+ .lower_margin = 7,
+ .hsync_len = 60,
+ .vsync_len = 10,
+ .sync = FB_SYNC_EXT,
+ .vmode = FB_VMODE_NONINTERLACED
+} } };
+size_t display_count = ARRAY_SIZE(displays);
+
+static void setup_display(void)
+{
+ struct mxc_ccm_reg *mxc_ccm = (struct mxc_ccm_reg *)CCM_BASE_ADDR;
+ struct iomuxc *iomux = (struct iomuxc *)IOMUXC_BASE_ADDR;
+ int reg;
+
+ enable_ipu_clock();
+ imx_setup_hdmi();
+ /* Turn on LDB0,IPU,IPU DI0 clocks */
+ reg = __raw_readl(&mxc_ccm->CCGR3);
+ reg |= MXC_CCM_CCGR3_LDB_DI0_MASK;
+ writel(reg, &mxc_ccm->CCGR3);
+
+ /* set LDB0, LDB1 clk select to 011/011 */
+ reg = readl(&mxc_ccm->cs2cdr);
+ reg &= ~(MXC_CCM_CS2CDR_LDB_DI0_CLK_SEL_MASK
+ |MXC_CCM_CS2CDR_LDB_DI1_CLK_SEL_MASK);
+ reg |= (3<<MXC_CCM_CS2CDR_LDB_DI0_CLK_SEL_OFFSET)
+ |(3<<MXC_CCM_CS2CDR_LDB_DI1_CLK_SEL_OFFSET);
+ writel(reg, &mxc_ccm->cs2cdr);
+
+ reg = readl(&mxc_ccm->cscmr2);
+ reg |= MXC_CCM_CSCMR2_LDB_DI0_IPU_DIV;
+ writel(reg, &mxc_ccm->cscmr2);
+
+ reg = readl(&mxc_ccm->chsccdr);
+ reg |= (CHSCCDR_CLK_SEL_LDB_DI0
+ <<MXC_CCM_CHSCCDR_IPU1_DI0_CLK_SEL_OFFSET);
+ writel(reg, &mxc_ccm->chsccdr);
+
+ reg = IOMUXC_GPR2_BGREF_RRMODE_EXTERNAL_RES
+ |IOMUXC_GPR2_DI1_VS_POLARITY_ACTIVE_HIGH
+ |IOMUXC_GPR2_DI0_VS_POLARITY_ACTIVE_LOW
+ |IOMUXC_GPR2_BIT_MAPPING_CH1_SPWG
+ |IOMUXC_GPR2_DATA_WIDTH_CH1_18BIT
+ |IOMUXC_GPR2_BIT_MAPPING_CH0_SPWG
+ |IOMUXC_GPR2_DATA_WIDTH_CH0_18BIT
+ |IOMUXC_GPR2_LVDS_CH1_MODE_DISABLED
+ |IOMUXC_GPR2_LVDS_CH0_MODE_ENABLED_DI0;
+ writel(reg, &iomux->gpr[2]);
+
+ reg = readl(&iomux->gpr[3]);
+ reg = (reg & ~(IOMUXC_GPR3_LVDS0_MUX_CTL_MASK
+ |IOMUXC_GPR3_HDMI_MUX_CTL_MASK))
+ | (IOMUXC_GPR3_MUX_SRC_IPU1_DI0
+ <<IOMUXC_GPR3_LVDS0_MUX_CTL_OFFSET);
+ writel(reg, &iomux->gpr[3]);
+
+ /* backlight unconditionally on for now */
+ imx_iomux_v3_setup_multiple_pads(backlight_pads,
+ ARRAY_SIZE(backlight_pads));
+ /* use 0 for EDT 7", use 1 for LG fullHD panel */
+ gpio_direction_output(RGB_BACKLIGHTPWM_GP, 0);
+ gpio_direction_output(RGB_BACKLIGHTPWM_OE, 0);
+ gpio_direction_output(RGB_BACKLIGHT_GP, 1);
+}
+#endif /* defined(CONFIG_VIDEO_IPUV3) */
+
+int board_early_init_f(void)
+{
+ imx_iomux_v3_setup_multiple_pads(pwr_intb_pads,
+ ARRAY_SIZE(pwr_intb_pads));
+#ifndef CONFIG_TDX_APALIS_IMX6_V1_0
+ setup_iomux_dte_uart();
+#else
+ setup_iomux_dce_uart();
+#endif
+
+#if defined(CONFIG_VIDEO_IPUV3)
+ setup_display();
+#endif
+ return 0;
+}
+
+/*
+ * Do not overwrite the console
+ * Use always serial for U-Boot console
+ */
+int overwrite_console(void)
+{
+ return 1;
+}
+
+int board_init(void)
+{
+ /* address of boot parameters */
+ gd->bd->bi_boot_params = PHYS_SDRAM + 0x100;
+
+ setup_i2c(0, CONFIG_SYS_I2C_SPEED, 0x7f, &i2c_pad_info1);
+ setup_i2c(1, CONFIG_SYS_I2C_SPEED, 0x7f, &i2c_pad_info_loc);
+ setup_i2c(2, CONFIG_SYS_I2C_SPEED, 0x7f, &i2c_pad_info3);
+
+#ifdef CONFIG_TDX_CMD_IMX_MFGR
+ (void) pmic_init();
+#endif
+
+#ifdef CONFIG_CMD_SATA
+ setup_sata();
+#endif
+
+ setup_iomux_gpio();
+
+ return 0;
+}
+
+#ifdef CONFIG_BOARD_LATE_INIT
+int board_late_init(void)
+{
+#if defined(CONFIG_REVISION_TAG) && \
+ defined(CONFIG_ENV_VARS_UBOOT_RUNTIME_CONFIG)
+ char env_str[256];
+ u32 rev;
+
+ rev = get_board_rev();
+ snprintf(env_str, ARRAY_SIZE(env_str), "%.4x", rev);
+ setenv("board_rev", env_str);
+
+#ifndef CONFIG_TDX_APALIS_IMX6_V1_0
+ if ((rev & 0xfff0) == 0x0100) {
+ char *fdt_env;
+
+ /* reconfigure the UART to DCE mode dynamically if on V1.0 HW */
+ setup_iomux_dce_uart();
+
+ /* if using the default device tree, use version for V1.0 HW */
+ fdt_env = getenv("fdt_file");
+ if ((fdt_env != NULL) && (strcmp(FDT_FILE, fdt_env) == 0)) {
+ setenv("fdt_file", FDT_FILE_V1_0);
+ printf("patching fdt_file to " FDT_FILE_V1_0 "\n");
+#ifndef CONFIG_ENV_IS_NOWHERE
+ saveenv();
+#endif
+ }
+ }
+#endif /* CONFIG_TDX_APALIS_IMX6_V1_0 */
+#endif /* CONFIG_REVISION_TAG */
+
+ return 0;
+}
+#endif /* CONFIG_BOARD_LATE_INIT */
+
+#if defined(CONFIG_OF_LIBFDT) && defined(CONFIG_OF_SYSTEM_SETUP)
+int ft_system_setup(void *blob, bd_t *bd)
+{
+ return 0;
+}
+#endif
+
+int checkboard(void)
+{
+ char it[] = " IT";
+ int minc, maxc;
+
+ switch (get_cpu_temp_grade(&minc, &maxc)) {
+ case TEMP_AUTOMOTIVE:
+ case TEMP_INDUSTRIAL:
+ break;
+ case TEMP_EXTCOMMERCIAL:
+ default:
+ it[0] = 0;
+ };
+ printf("Model: Toradex Apalis iMX6 %s %s%s\n",
+ is_cpu_type(MXC_CPU_MX6D) ? "Dual" : "Quad",
+ (gd->ram_size == 0x80000000) ? "2GB" :
+ (gd->ram_size == 0x40000000) ? "1GB" : "512MB", it);
+ return 0;
+}
+
+#if defined(CONFIG_OF_LIBFDT) && defined(CONFIG_OF_BOARD_SETUP)
+int ft_board_setup(void *blob, bd_t *bd)
+{
+ return ft_common_board_setup(blob, bd);
+}
+#endif
+
+#ifdef CONFIG_CMD_BMODE
+static const struct boot_mode board_boot_modes[] = {
+ /* 4-bit bus width */
+ {"mmc", MAKE_CFGVAL(0x40, 0x20, 0x00, 0x00)},
+ {"sd", MAKE_CFGVAL(0x40, 0x28, 0x00, 0x00)},
+ {NULL, 0},
+};
+#endif
+
+int misc_init_r(void)
+{
+#ifdef CONFIG_CMD_BMODE
+ add_board_boot_modes(board_boot_modes);
+#endif
+ return 0;
+}
+
+#ifdef CONFIG_LDO_BYPASS_CHECK
+/* TODO, use external pmic, for now always ldo_enable */
+void ldo_mode_set(int ldo_bypass)
+{
+ return;
+}
+#endif
+
+#ifdef CONFIG_SPL_BUILD
+#include <spl.h>
+#include <libfdt.h>
+#include "asm/arch/mx6q-ddr.h"
+#include "asm/arch/iomux.h"
+#include "asm/arch/crm_regs.h"
+
+static int mx6_com_dcd_table[] = {
+/* ddr-setup.cfg */
+MX6_IOM_DRAM_SDQS0, 0x00000030,
+MX6_IOM_DRAM_SDQS1, 0x00000030,
+MX6_IOM_DRAM_SDQS2, 0x00000030,
+MX6_IOM_DRAM_SDQS3, 0x00000030,
+MX6_IOM_DRAM_SDQS4, 0x00000030,
+MX6_IOM_DRAM_SDQS5, 0x00000030,
+MX6_IOM_DRAM_SDQS6, 0x00000030,
+MX6_IOM_DRAM_SDQS7, 0x00000030,
+
+MX6_IOM_GRP_B0DS, 0x00000030,
+MX6_IOM_GRP_B1DS, 0x00000030,
+MX6_IOM_GRP_B2DS, 0x00000030,
+MX6_IOM_GRP_B3DS, 0x00000030,
+MX6_IOM_GRP_B4DS, 0x00000030,
+MX6_IOM_GRP_B5DS, 0x00000030,
+MX6_IOM_GRP_B6DS, 0x00000030,
+MX6_IOM_GRP_B7DS, 0x00000030,
+MX6_IOM_GRP_ADDDS, 0x00000030,
+/* 40 Ohm drive strength for cs0/1,sdba2,cke0/1,sdwe */
+MX6_IOM_GRP_CTLDS, 0x00000030,
+
+MX6_IOM_DRAM_DQM0, 0x00020030,
+MX6_IOM_DRAM_DQM1, 0x00020030,
+MX6_IOM_DRAM_DQM2, 0x00020030,
+MX6_IOM_DRAM_DQM3, 0x00020030,
+MX6_IOM_DRAM_DQM4, 0x00020030,
+MX6_IOM_DRAM_DQM5, 0x00020030,
+MX6_IOM_DRAM_DQM6, 0x00020030,
+MX6_IOM_DRAM_DQM7, 0x00020030,
+
+MX6_IOM_DRAM_CAS, 0x00020030,
+MX6_IOM_DRAM_RAS, 0x00020030,
+MX6_IOM_DRAM_SDCLK_0, 0x00020030,
+MX6_IOM_DRAM_SDCLK_1, 0x00020030,
+
+MX6_IOM_DRAM_RESET, 0x00020030,
+MX6_IOM_DRAM_SDCKE0, 0x00003000,
+MX6_IOM_DRAM_SDCKE1, 0x00003000,
+
+MX6_IOM_DRAM_SDODT0, 0x00003030,
+MX6_IOM_DRAM_SDODT1, 0x00003030,
+
+/* (differential input) */
+MX6_IOM_DDRMODE_CTL, 0x00020000,
+/* (differential input) */
+MX6_IOM_GRP_DDRMODE, 0x00020000,
+/* disable ddr pullups */
+MX6_IOM_GRP_DDRPKE, 0x00000000,
+MX6_IOM_DRAM_SDBA2, 0x00000000,
+/* 40 Ohm drive strength for cs0/1,sdba2,cke0/1,sdwe */
+MX6_IOM_GRP_DDR_TYPE, 0x000C0000,
+
+/* Read data DQ Byte0-3 delay */
+MX6_MMDC_P0_MPRDDQBY0DL, 0x33333333,
+MX6_MMDC_P0_MPRDDQBY1DL, 0x33333333,
+MX6_MMDC_P0_MPRDDQBY2DL, 0x33333333,
+MX6_MMDC_P0_MPRDDQBY3DL, 0x33333333,
+MX6_MMDC_P1_MPRDDQBY0DL, 0x33333333,
+MX6_MMDC_P1_MPRDDQBY1DL, 0x33333333,
+MX6_MMDC_P1_MPRDDQBY2DL, 0x33333333,
+MX6_MMDC_P1_MPRDDQBY3DL, 0x33333333,
+
+/*
+ * MDMISC mirroring interleaved (row/bank/col)
+ */
+MX6_MMDC_P0_MDMISC, 0x00081740,
+
+/*
+ * MDSCR con_req
+ */
+MX6_MMDC_P0_MDSCR, 0x00008000,
+
+/* 1066mhz_4x128mx16.cfg */
+
+MX6_MMDC_P0_MDPDC, 0x00020036,
+MX6_MMDC_P0_MDCFG0, 0x555A7954,
+MX6_MMDC_P0_MDCFG1, 0xDB328F64,
+MX6_MMDC_P0_MDCFG2, 0x01FF00DB,
+MX6_MMDC_P0_MDRWD, 0x000026D2,
+MX6_MMDC_P0_MDOR, 0x005A1023,
+MX6_MMDC_P0_MDOTC, 0x09555050,
+MX6_MMDC_P0_MDPDC, 0x00025576,
+MX6_MMDC_P0_MDASP, 0x00000027,
+MX6_MMDC_P0_MDCTL, 0x831A0000,
+MX6_MMDC_P0_MDSCR, 0x04088032,
+MX6_MMDC_P0_MDSCR, 0x00008033,
+MX6_MMDC_P0_MDSCR, 0x00428031,
+MX6_MMDC_P0_MDSCR, 0x19308030,
+MX6_MMDC_P0_MDSCR, 0x04008040,
+MX6_MMDC_P0_MPZQHWCTRL, 0xA1390003,
+MX6_MMDC_P1_MPZQHWCTRL, 0xA1390003,
+MX6_MMDC_P0_MDREF, 0x00005800,
+MX6_MMDC_P0_MPODTCTRL, 0x00000000,
+MX6_MMDC_P1_MPODTCTRL, 0x00000000,
+
+MX6_MMDC_P0_MPDGCTRL0, 0x432A0338,
+MX6_MMDC_P0_MPDGCTRL1, 0x03260324,
+MX6_MMDC_P1_MPDGCTRL0, 0x43340344,
+MX6_MMDC_P1_MPDGCTRL1, 0x031E027C,
+
+MX6_MMDC_P0_MPRDDLCTL, 0x33272D2E,
+MX6_MMDC_P1_MPRDDLCTL, 0x2F312B37,
+
+MX6_MMDC_P0_MPWRDLCTL, 0x3A35433C,
+MX6_MMDC_P1_MPWRDLCTL, 0x4336453F,
+
+MX6_MMDC_P0_MPWLDECTRL0, 0x0009000E,
+MX6_MMDC_P0_MPWLDECTRL1, 0x0018000B,
+MX6_MMDC_P1_MPWLDECTRL0, 0x00060015,
+MX6_MMDC_P1_MPWLDECTRL1, 0x0006000E,
+
+MX6_MMDC_P0_MPMUR0, 0x00000800,
+MX6_MMDC_P1_MPMUR0, 0x00000800,
+MX6_MMDC_P0_MDSCR, 0x00000000,
+MX6_MMDC_P0_MAPSR, 0x00011006,
+};
+
+static int mx6_it_dcd_table[] = {
+/* ddr-setup.cfg */
+MX6_IOM_DRAM_SDQS0, 0x00000030,
+MX6_IOM_DRAM_SDQS1, 0x00000030,
+MX6_IOM_DRAM_SDQS2, 0x00000030,
+MX6_IOM_DRAM_SDQS3, 0x00000030,
+MX6_IOM_DRAM_SDQS4, 0x00000030,
+MX6_IOM_DRAM_SDQS5, 0x00000030,
+MX6_IOM_DRAM_SDQS6, 0x00000030,
+MX6_IOM_DRAM_SDQS7, 0x00000030,
+
+MX6_IOM_GRP_B0DS, 0x00000030,
+MX6_IOM_GRP_B1DS, 0x00000030,
+MX6_IOM_GRP_B2DS, 0x00000030,
+MX6_IOM_GRP_B3DS, 0x00000030,
+MX6_IOM_GRP_B4DS, 0x00000030,
+MX6_IOM_GRP_B5DS, 0x00000030,
+MX6_IOM_GRP_B6DS, 0x00000030,
+MX6_IOM_GRP_B7DS, 0x00000030,
+MX6_IOM_GRP_ADDDS, 0x00000030,
+/* 40 Ohm drive strength for cs0/1,sdba2,cke0/1,sdwe */
+MX6_IOM_GRP_CTLDS, 0x00000030,
+
+MX6_IOM_DRAM_DQM0, 0x00020030,
+MX6_IOM_DRAM_DQM1, 0x00020030,
+MX6_IOM_DRAM_DQM2, 0x00020030,
+MX6_IOM_DRAM_DQM3, 0x00020030,
+MX6_IOM_DRAM_DQM4, 0x00020030,
+MX6_IOM_DRAM_DQM5, 0x00020030,
+MX6_IOM_DRAM_DQM6, 0x00020030,
+MX6_IOM_DRAM_DQM7, 0x00020030,
+
+MX6_IOM_DRAM_CAS, 0x00020030,
+MX6_IOM_DRAM_RAS, 0x00020030,
+MX6_IOM_DRAM_SDCLK_0, 0x00020030,
+MX6_IOM_DRAM_SDCLK_1, 0x00020030,
+
+MX6_IOM_DRAM_RESET, 0x00020030,
+MX6_IOM_DRAM_SDCKE0, 0x00003000,
+MX6_IOM_DRAM_SDCKE1, 0x00003000,
+
+MX6_IOM_DRAM_SDODT0, 0x00003030,
+MX6_IOM_DRAM_SDODT1, 0x00003030,
+
+/* (differential input) */
+MX6_IOM_DDRMODE_CTL, 0x00020000,
+/* (differential input) */
+MX6_IOM_GRP_DDRMODE, 0x00020000,
+/* disable ddr pullups */
+MX6_IOM_GRP_DDRPKE, 0x00000000,
+MX6_IOM_DRAM_SDBA2, 0x00000000,
+/* 40 Ohm drive strength for cs0/1,sdba2,cke0/1,sdwe */
+MX6_IOM_GRP_DDR_TYPE, 0x000C0000,
+
+/* Read data DQ Byte0-3 delay */
+MX6_MMDC_P0_MPRDDQBY0DL, 0x33333333,
+MX6_MMDC_P0_MPRDDQBY1DL, 0x33333333,
+MX6_MMDC_P0_MPRDDQBY2DL, 0x33333333,
+MX6_MMDC_P0_MPRDDQBY3DL, 0x33333333,
+MX6_MMDC_P1_MPRDDQBY0DL, 0x33333333,
+MX6_MMDC_P1_MPRDDQBY1DL, 0x33333333,
+MX6_MMDC_P1_MPRDDQBY2DL, 0x33333333,
+MX6_MMDC_P1_MPRDDQBY3DL, 0x33333333,
+
+/*
+ * MDMISC mirroring interleaved (row/bank/col)
+ */
+MX6_MMDC_P0_MDMISC, 0x00081740,
+
+/*
+ * MDSCR con_req
+ */
+MX6_MMDC_P0_MDSCR, 0x00008000,
+
+/* 1066mhz_4x256mx16.cfg */
+
+MX6_MMDC_P0_MDPDC, 0x00020036,
+MX6_MMDC_P0_MDCFG0, 0x898E78f5,
+MX6_MMDC_P0_MDCFG1, 0xff328f64,
+MX6_MMDC_P0_MDCFG2, 0x01FF00DB,
+MX6_MMDC_P0_MDRWD, 0x000026D2,
+MX6_MMDC_P0_MDOR, 0x008E1023,
+MX6_MMDC_P0_MDOTC, 0x09444040,
+MX6_MMDC_P0_MDPDC, 0x00025576,
+MX6_MMDC_P0_MDASP, 0x00000047,
+MX6_MMDC_P0_MDCTL, 0x841A0000,
+MX6_MMDC_P0_MDSCR, 0x02888032,
+MX6_MMDC_P0_MDSCR, 0x00008033,
+MX6_MMDC_P0_MDSCR, 0x00048031,
+MX6_MMDC_P0_MDSCR, 0x19408030,
+MX6_MMDC_P0_MDSCR, 0x04008040,
+MX6_MMDC_P0_MPZQHWCTRL, 0xA1390003,
+MX6_MMDC_P1_MPZQHWCTRL, 0xA1390003,
+MX6_MMDC_P0_MDREF, 0x00007800,
+MX6_MMDC_P0_MPODTCTRL, 0x00022227,
+MX6_MMDC_P1_MPODTCTRL, 0x00022227,
+
+MX6_MMDC_P0_MPDGCTRL0, 0x03300338,
+MX6_MMDC_P0_MPDGCTRL1, 0x03240324,
+MX6_MMDC_P1_MPDGCTRL0, 0x03440350,
+MX6_MMDC_P1_MPDGCTRL1, 0x032C0308,
+
+MX6_MMDC_P0_MPRDDLCTL, 0x40363C3E,
+MX6_MMDC_P1_MPRDDLCTL, 0x3C3E3C46,
+
+MX6_MMDC_P0_MPWRDLCTL, 0x403E463E,
+MX6_MMDC_P1_MPWRDLCTL, 0x4A384C46,
+
+MX6_MMDC_P0_MPWLDECTRL0, 0x0009000E,
+MX6_MMDC_P0_MPWLDECTRL1, 0x0018000B,
+MX6_MMDC_P1_MPWLDECTRL0, 0x00060015,
+MX6_MMDC_P1_MPWLDECTRL1, 0x0006000E,
+
+MX6_MMDC_P0_MPMUR0, 0x00000800,
+MX6_MMDC_P1_MPMUR0, 0x00000800,
+MX6_MMDC_P0_MDSCR, 0x00000000,
+MX6_MMDC_P0_MAPSR, 0x00011006,
+};
+
+
+static void ccgr_init(void)
+{
+ struct mxc_ccm_reg *ccm = (struct mxc_ccm_reg *)CCM_BASE_ADDR;
+
+ writel(0x00C03F3F, &ccm->CCGR0);
+ writel(0x0030FC03, &ccm->CCGR1);
+ writel(0x0FFFFFF3, &ccm->CCGR2);
+ writel(0x3FF0300F, &ccm->CCGR3);
+ writel(0x00FFF300, &ccm->CCGR4);
+ writel(0x0F0000F3, &ccm->CCGR5);
+ writel(0x000003FF, &ccm->CCGR6);
+
+/*
+ * Setup CCM_CCOSR register as follows:
+ *
+ * cko1_en = 1 --> CKO1 enabled
+ * cko1_div = 111 --> divide by 8
+ * cko1_sel = 1011 --> ahb_clk_root
+ *
+ * This sets CKO1 at ahb_clk_root/8 = 132/8 = 16.5 MHz
+ */
+ writel(0x000000FB, &ccm->ccosr);
+}
+
+static void gpr_init(void)
+{
+ struct iomuxc *iomux = (struct iomuxc *)IOMUXC_BASE_ADDR;
+
+ /* enable AXI cache for VDOA/VPU/IPU */
+ writel(0xF00000CF, &iomux->gpr[4]);
+ /* set IPU AXI-id0 Qos=0xf(bypass) AXI-id1 Qos=0x7 */
+ writel(0x007F007F, &iomux->gpr[6]);
+ writel(0x007F007F, &iomux->gpr[7]);
+}
+
+static void ddr_init(int *table, int size)
+{
+ int i;
+
+ for (i = 0; i < size / 2 ; i++)
+ writel(table[2 * i + 1], table[2 * i]);
+}
+
+static void spl_dram_init(void)
+{
+ int minc, maxc;
+
+ switch (get_cpu_temp_grade(&minc, &maxc)) {
+ case TEMP_COMMERCIAL:
+ case TEMP_EXTCOMMERCIAL:
+ puts("Commercial temperature grade DDR3 timings.\n");
+ ddr_init(mx6_com_dcd_table, ARRAY_SIZE(mx6_com_dcd_table));
+ break;
+ case TEMP_INDUSTRIAL:
+ case TEMP_AUTOMOTIVE:
+ default:
+ puts("Industrial temperature grade DDR3 timings.\n");
+ ddr_init(mx6_it_dcd_table, ARRAY_SIZE(mx6_it_dcd_table));
+ break;
+ };
+ udelay(100);
+}
+
+void board_init_f(ulong dummy)
+{
+ /* setup AIPS and disable watchdog */
+ arch_cpu_init();
+
+ ccgr_init();
+ gpr_init();
+
+ /* iomux and setup of i2c */
+ board_early_init_f();
+
+ /* setup GP timer */
+ timer_init();
+
+ /* UART clocks enabled and gd valid - init serial console */
+ preloader_console_init();
+
+#ifndef CONFIG_TDX_APALIS_IMX6_V1_0
+ /* Make sure we use dte mode */
+ setup_dtemode_uart();
+#endif
+
+ /* DDR initialization */
+ spl_dram_init();
+
+ /* Clear the BSS. */
+ memset(__bss_start, 0, __bss_end - __bss_start);
+
+ /* load/boot image from boot device */
+ board_init_r(NULL, 0);
+}
+
+void reset_cpu(ulong addr)
+{
+}
+
+#endif
+
+static struct mxc_serial_platdata mxc_serial_plat = {
+ .reg = (struct mxc_uart *)UART1_BASE,
+ .use_dte = true,
+};
+
+U_BOOT_DEVICE(mxc_serial) = {
+ .name = "serial_mxc",
+ .platdata = &mxc_serial_plat,
+};
diff --git a/board/toradex/apalis_imx6/apalis_imx6q.cfg b/board/toradex/apalis_imx6/apalis_imx6q.cfg
new file mode 100644
index 0000000..b775010
--- /dev/null
+++ b/board/toradex/apalis_imx6/apalis_imx6q.cfg
@@ -0,0 +1,34 @@
+/*
+ * Copyright (C) 2013 Boundary Devices
+ * Copyright (C) 2014-2016, Toradex AG
+ *
+ * SPDX-License-Identifier: GPL-2.0+
+ *
+ * Refer doc/README.imximage for more details about how-to configure
+ * and create imximage boot image
+ *
+ * The syntax is taken as close as possible with the kwbimage
+ */
+
+/* image version */
+IMAGE_VERSION 2
+
+/*
+ * Boot Device : one of
+ * spi, sd (the board has no nand neither onenand)
+ */
+BOOT_FROM sd
+
+#define __ASSEMBLY__
+#include <config.h>
+#include "asm/arch/mx6-ddr.h"
+#include "asm/arch/iomux.h"
+#include "asm/arch/crm_regs.h"
+
+#include "ddr-setup.cfg"
+#if CONFIG_DDR_MB == 2048
+#include "1066mhz_4x256mx16.cfg"
+#else
+#include "1066mhz_4x128mx16.cfg"
+#endif
+#include "clocks.cfg"
diff --git a/board/toradex/apalis_imx6/clocks.cfg b/board/toradex/apalis_imx6/clocks.cfg
new file mode 100644
index 0000000..be96094
--- /dev/null
+++ b/board/toradex/apalis_imx6/clocks.cfg
@@ -0,0 +1,42 @@
+/*
+ * Copyright (C) 2013 Boundary Devices
+ * Copyright (C) 2014-2016, Toradex AG
+ *
+ * SPDX-License-Identifier: GPL-2.0+
+ *
+ * Device Configuration Data (DCD)
+ *
+ * Each entry must have the format:
+ * Addr-type Address Value
+ *
+ * where:
+ * Addr-type register length (1,2 or 4 bytes)
+ * Address absolute address of the register
+ * value value to be stored in the register
+ */
+
+/* set the default clock gate to save power */
+DATA 4, CCM_CCGR0, 0x00C03F3F
+DATA 4, CCM_CCGR1, 0x0030FC03
+DATA 4, CCM_CCGR2, 0x0FFFC000
+DATA 4, CCM_CCGR3, 0x3FF00000
+DATA 4, CCM_CCGR4, 0x00FFF300
+DATA 4, CCM_CCGR5, 0x0F0000C3
+DATA 4, CCM_CCGR6, 0x000003FF
+
+/* enable AXI cache for VDOA/VPU/IPU */
+DATA 4, MX6_IOMUXC_GPR4, 0xF00000CF
+/* set IPU AXI-id0 Qos=0xf(bypass) AXI-id1 Qos=0x7 */
+DATA 4, MX6_IOMUXC_GPR6, 0x007F007F
+DATA 4, MX6_IOMUXC_GPR7, 0x007F007F
+
+/*
+ * Setup CCM_CCOSR register as follows:
+ *
+ * cko1_en = 1 --> CKO1 enabled
+ * cko1_div = 111 --> divide by 8
+ * cko1_sel = 1011 --> ahb_clk_root
+ *
+ * This sets CKO1 at ahb_clk_root/8 = 132/8 = 16.5 MHz
+ */
+DATA 4, CCM_CCOSR, 0x000000fb
diff --git a/board/toradex/apalis_imx6/ddr-setup.cfg b/board/toradex/apalis_imx6/ddr-setup.cfg
new file mode 100644
index 0000000..de7cdd6
--- /dev/null
+++ b/board/toradex/apalis_imx6/ddr-setup.cfg
@@ -0,0 +1,97 @@
+/*
+ * Copyright (C) 2013 Boundary Devices
+ * Copyright (C) 2014-2016, Toradex AG
+ *
+ * SPDX-License-Identifier: GPL-2.0+
+ *
+ * Device Configuration Data (DCD)
+ *
+ * Each entry must have the format:
+ * Addr-type Address Value
+ *
+ * where:
+ * Addr-type register length (1,2 or 4 bytes)
+ * Address absolute address of the register
+ * value value to be stored in the register
+ */
+
+/*
+ * DDR3 settings
+ * MX6Q ddr is limited to 1066 Mhz currently 1056 MHz(528 MHz clock),
+ * memory bus width: 64 bits x16/x32/x64
+ * MX6DL ddr is limited to 800 MHz(400 MHz clock)
+ * memory bus width: 64 bits x16/x32/x64
+ * MX6SOLO ddr is limited to 800 MHz(400 MHz clock)
+ * memory bus width: 32 bits x16/x32
+ */
+DATA 4, MX6_IOM_DRAM_SDQS0, 0x00000030
+DATA 4, MX6_IOM_DRAM_SDQS1, 0x00000030
+DATA 4, MX6_IOM_DRAM_SDQS2, 0x00000030
+DATA 4, MX6_IOM_DRAM_SDQS3, 0x00000030
+DATA 4, MX6_IOM_DRAM_SDQS4, 0x00000030
+DATA 4, MX6_IOM_DRAM_SDQS5, 0x00000030
+DATA 4, MX6_IOM_DRAM_SDQS6, 0x00000030
+DATA 4, MX6_IOM_DRAM_SDQS7, 0x00000030
+
+DATA 4, MX6_IOM_GRP_B0DS, 0x00000030
+DATA 4, MX6_IOM_GRP_B1DS, 0x00000030
+DATA 4, MX6_IOM_GRP_B2DS, 0x00000030
+DATA 4, MX6_IOM_GRP_B3DS, 0x00000030
+DATA 4, MX6_IOM_GRP_B4DS, 0x00000030
+DATA 4, MX6_IOM_GRP_B5DS, 0x00000030
+DATA 4, MX6_IOM_GRP_B6DS, 0x00000030
+DATA 4, MX6_IOM_GRP_B7DS, 0x00000030
+DATA 4, MX6_IOM_GRP_ADDDS, 0x00000030
+/* 40 Ohm drive strength for cs0/1,sdba2,cke0/1,sdwe */
+DATA 4, MX6_IOM_GRP_CTLDS, 0x00000030
+
+DATA 4, MX6_IOM_DRAM_DQM0, 0x00020030
+DATA 4, MX6_IOM_DRAM_DQM1, 0x00020030
+DATA 4, MX6_IOM_DRAM_DQM2, 0x00020030
+DATA 4, MX6_IOM_DRAM_DQM3, 0x00020030
+DATA 4, MX6_IOM_DRAM_DQM4, 0x00020030
+DATA 4, MX6_IOM_DRAM_DQM5, 0x00020030
+DATA 4, MX6_IOM_DRAM_DQM6, 0x00020030
+DATA 4, MX6_IOM_DRAM_DQM7, 0x00020030
+
+DATA 4, MX6_IOM_DRAM_CAS, 0x00020030
+DATA 4, MX6_IOM_DRAM_RAS, 0x00020030
+DATA 4, MX6_IOM_DRAM_SDCLK_0, 0x00020030
+DATA 4, MX6_IOM_DRAM_SDCLK_1, 0x00020030
+
+DATA 4, MX6_IOM_DRAM_RESET, 0x00020030
+DATA 4, MX6_IOM_DRAM_SDCKE0, 0x00003000
+DATA 4, MX6_IOM_DRAM_SDCKE1, 0x00003000
+
+DATA 4, MX6_IOM_DRAM_SDODT0, 0x00003030
+DATA 4, MX6_IOM_DRAM_SDODT1, 0x00003030
+
+/* (differential input) */
+DATA 4, MX6_IOM_DDRMODE_CTL, 0x00020000
+/* (differential input) */
+DATA 4, MX6_IOM_GRP_DDRMODE, 0x00020000
+/* disable ddr pullups */
+DATA 4, MX6_IOM_GRP_DDRPKE, 0x00000000
+DATA 4, MX6_IOM_DRAM_SDBA2, 0x00000000
+/* 40 Ohm drive strength for cs0/1,sdba2,cke0/1,sdwe */
+DATA 4, MX6_IOM_GRP_DDR_TYPE, 0x000C0000
+
+/* Read data DQ Byte0-3 delay */
+DATA 4, MX6_MMDC_P0_MPRDDQBY0DL, 0x33333333
+DATA 4, MX6_MMDC_P0_MPRDDQBY1DL, 0x33333333
+DATA 4, MX6_MMDC_P0_MPRDDQBY2DL, 0x33333333
+DATA 4, MX6_MMDC_P0_MPRDDQBY3DL, 0x33333333
+DATA 4, MX6_MMDC_P1_MPRDDQBY0DL, 0x33333333
+DATA 4, MX6_MMDC_P1_MPRDDQBY1DL, 0x33333333
+DATA 4, MX6_MMDC_P1_MPRDDQBY2DL, 0x33333333
+DATA 4, MX6_MMDC_P1_MPRDDQBY3DL, 0x33333333
+
+/*
+ * MDMISC mirroring interleaved (row/bank/col)
+ */
+DATA 4, MX6_MMDC_P0_MDMISC, 0x00081740
+
+/*
+ * MDSCR con_req
+ */
+DATA 4, MX6_MMDC_P0_MDSCR, 0x00008000
diff --git a/board/toradex/apalis_imx6/do_fuse.c b/board/toradex/apalis_imx6/do_fuse.c
new file mode 100644
index 0000000..cff07e9
--- /dev/null
+++ b/board/toradex/apalis_imx6/do_fuse.c
@@ -0,0 +1,98 @@
+/*
+ * Copyright (C) 2014-2016, Toradex AG
+ *
+ * SPDX-License-Identifier: GPL-2.0+
+ */
+
+/*
+ * Helpers for i.MX OTP fusing during module production
+*/
+
+#include <common.h>
+#ifndef CONFIG_SPL_BUILD
+#include <console.h>
+#include <fuse.h>
+
+static int mfgr_fuse(void)
+{
+ unsigned val, val6;
+
+ fuse_sense(0, 5, &val);
+ printf("Fuse 0, 5: %8x\n", val);
+ fuse_sense(0, 6, &val6);
+ printf("Fuse 0, 6: %8x\n", val6);
+ fuse_sense(4, 3, &val);
+ printf("Fuse 4, 3: %8x\n", val);
+ fuse_sense(4, 2, &val);
+ printf("Fuse 4, 2: %8x\n", val);
+ if (val6 & 0x10) {
+ puts("BT_FUSE_SEL already fused, will do nothing\n");
+ return CMD_RET_FAILURE;
+ }
+ /* boot cfg */
+ fuse_prog(0, 5, 0x00005072);
+ /* BT_FUSE_SEL */
+ fuse_prog(0, 6, 0x00000010);
+ return CMD_RET_SUCCESS;
+}
+
+int do_mfgr_fuse(cmd_tbl_t *cmdtp, int flag, int argc,
+ char * const argv[])
+{
+ int ret;
+ puts("Fusing...\n");
+ ret = mfgr_fuse();
+ if (ret == CMD_RET_SUCCESS)
+ puts("done.\n");
+ else
+ puts("failed.\n");
+ return ret;
+}
+
+int do_updt_fuse(cmd_tbl_t *cmdtp, int flag, int argc,
+ char * const argv[])
+{
+ unsigned val;
+ int ret;
+ int confirmed = argc >= 1 && !strcmp(argv[1], "-y");
+
+ /* can be used in scripts for command availability check */
+ if (argc >= 1 && !strcmp(argv[1], "-n"))
+ return CMD_RET_SUCCESS;
+
+ /* boot cfg */
+ fuse_sense(0, 5, &val);
+ printf("Fuse 0, 5: %8x\n", val);
+ if (val & 0x10) {
+ puts("Fast boot mode already fused, no need to fuse\n");
+ return CMD_RET_SUCCESS;
+ }
+ if (!confirmed) {
+ puts("Warning: Programming fuses is an irreversible operation!\n"
+ " Updating to fast boot mode prevents easy\n"
+ " downgrading to previous BSP versions.\n"
+ "\nReally perform this fuse programming? <y/N>\n");
+ if (!confirm_yesno())
+ return CMD_RET_FAILURE;
+ }
+ puts("Fusing fast boot mode...\n");
+ ret = fuse_prog(0, 5, 0x00005072);
+ if (ret == CMD_RET_SUCCESS)
+ puts("done.\n");
+ else
+ puts("failed.\n");
+ return ret;
+}
+
+U_BOOT_CMD(
+ mfgr_fuse, 1, 0, do_mfgr_fuse,
+ "OTP fusing during module production",
+ ""
+);
+
+U_BOOT_CMD(
+ updt_fuse, 2, 0, do_updt_fuse,
+ "OTP fusing during module update",
+ "updt_fuse [-n] [-y] - boot cfg fast boot mode fusing"
+);
+#endif /* CONFIG_SPL_BUILD */
diff --git a/board/toradex/apalis_imx6/pf0100.c b/board/toradex/apalis_imx6/pf0100.c
new file mode 100644
index 0000000..0b42438
--- /dev/null
+++ b/board/toradex/apalis_imx6/pf0100.c
@@ -0,0 +1,228 @@
+/*
+ * Copyright (C) 2014-2016, Toradex AG
+ *
+ * SPDX-License-Identifier: GPL-2.0+
+ */
+
+/*
+ * Helpers for Freescale PMIC PF0100
+*/
+
+#include <common.h>
+#include <i2c.h>
+#include <asm/arch/imx-regs.h>
+#include <asm/arch/iomux.h>
+#include <asm/arch/mx6-pins.h>
+#include <asm/gpio.h>
+#include <asm/imx-common/iomux-v3.h>
+
+#include "pf0100_otp.inc"
+#include "pf0100.h"
+
+/* define for PMIC register dump */
+/*#define DEBUG */
+
+/* use Apalis GPIO1 to switch on VPGM, ON: 1 */
+static iomux_v3_cfg_t const pmic_prog_pads[] = {
+ MX6_PAD_NANDF_D4__GPIO2_IO04 | MUX_PAD_CTRL(NO_PAD_CTRL),
+# define PMIC_PROG_VOLTAGE IMX_GPIO_NR(2, 4)
+};
+
+unsigned pmic_init(void)
+{
+ unsigned programmed = 0;
+ uchar bus = 1;
+ uchar devid, revid, val;
+
+ puts("PMIC: ");
+ if (!((0 == i2c_set_bus_num(bus)) &&
+ (0 == i2c_probe(PFUZE100_I2C_ADDR)))) {
+ puts("i2c bus failed\n");
+ return 0;
+ }
+ /* get device ident */
+ if (i2c_read(PFUZE100_I2C_ADDR, PFUZE100_DEVICEID, 1, &devid, 1) < 0) {
+ puts("i2c pmic devid read failed\n");
+ return 0;
+ }
+ if (i2c_read(PFUZE100_I2C_ADDR, PFUZE100_REVID, 1, &revid, 1) < 0) {
+ puts("i2c pmic revid read failed\n");
+ return 0;
+ }
+ printf("device id: 0x%.2x, revision id: 0x%.2x\n", devid, revid);
+
+#ifdef DEBUG
+ {
+ unsigned i, j;
+
+ for (i = 0; i < 16; i++)
+ printf("\t%x", i);
+ for (j = 0; j < 0x80; ) {
+ printf("\n%2x", j);
+ for (i = 0; i < 16; i++) {
+ i2c_read(PFUZE100_I2C_ADDR, j+i, 1, &val, 1);
+ printf("\t%2x", val);
+ }
+ j += 0x10;
+ }
+ printf("\nEXT Page 1");
+
+ val = PFUZE100_PAGE_REGISTER_PAGE1;
+ if (i2c_write(PFUZE100_I2C_ADDR, PFUZE100_PAGE_REGISTER, 1,
+ &val, 1)) {
+ puts("i2c write failed\n");
+ return 0;
+ }
+
+ for (j = 0x80; j < 0x100; ) {
+ printf("\n%2x", j);
+ for (i = 0; i < 16; i++) {
+ i2c_read(PFUZE100_I2C_ADDR, j+i, 1, &val, 1);
+ printf("\t%2x", val);
+ }
+ j += 0x10;
+ }
+ printf("\nEXT Page 2");
+
+ val = PFUZE100_PAGE_REGISTER_PAGE2;
+ if (i2c_write(PFUZE100_I2C_ADDR, PFUZE100_PAGE_REGISTER, 1,
+ &val, 1)) {
+ puts("i2c write failed\n");
+ return 0;
+ }
+
+ for (j = 0x80; j < 0x100; ) {
+ printf("\n%2x", j);
+ for (i = 0; i < 16; i++) {
+ i2c_read(PFUZE100_I2C_ADDR, j+i, 1, &val, 1);
+ printf("\t%2x", val);
+ }
+ j += 0x10;
+ }
+ printf("\n");
+ }
+#endif
+ /* get device programmed state */
+ val = PFUZE100_PAGE_REGISTER_PAGE1;
+ if (i2c_write(PFUZE100_I2C_ADDR, PFUZE100_PAGE_REGISTER, 1, &val, 1)) {
+ puts("i2c write failed\n");
+ return 0;
+ }
+ if (i2c_read(PFUZE100_I2C_ADDR, PFUZE100_FUSE_POR1, 1, &val, 1) < 0) {
+ puts("i2c fuse_por read failed\n");
+ return 0;
+ }
+ if (val & PFUZE100_FUSE_POR_M)
+ programmed++;
+
+ if (i2c_read(PFUZE100_I2C_ADDR, PFUZE100_FUSE_POR2, 1, &val, 1) < 0) {
+ puts("i2c fuse_por read failed\n");
+ return programmed;
+ }
+ if (val & PFUZE100_FUSE_POR_M)
+ programmed++;
+
+ if (i2c_read(PFUZE100_I2C_ADDR, PFUZE100_FUSE_POR3, 1, &val, 1) < 0) {
+ puts("i2c fuse_por read failed\n");
+ return programmed;
+ }
+ if (val & PFUZE100_FUSE_POR_M)
+ programmed++;
+
+ switch (programmed) {
+ case 0:
+ printf("PMIC: not programmed\n");
+ break;
+ case 3:
+ printf("PMIC: programmed\n");
+ break;
+ default:
+ printf("PMIC: undefined programming state\n");
+ break;
+ }
+
+ /* The following is needed during production */
+ if (programmed != 3) {
+ /* set VGEN1 to 1.2V */
+ val = PFUZE100_VGEN1_VAL;
+ if (i2c_write(PFUZE100_I2C_ADDR, PFUZE100_VGEN1CTL, 1,
+ &val, 1)) {
+ puts("i2c write failed\n");
+ return programmed;
+ }
+
+ /* set SWBST to 5.0V */
+ val = PFUZE100_SWBST_VAL;
+ if (i2c_write(PFUZE100_I2C_ADDR, PFUZE100_SWBSTCTL, 1,
+ &val, 1)) {
+ puts("i2c write failed\n");
+ }
+ }
+ return programmed;
+}
+
+int pf0100_prog(void)
+{
+ unsigned char bus = 1;
+ unsigned char val;
+ unsigned int i;
+
+ if (pmic_init() == 3) {
+ puts("PMIC already programmed, exiting\n");
+ return CMD_RET_FAILURE;
+ }
+ /* set up gpio to manipulate vprog, initially off */
+ imx_iomux_v3_setup_multiple_pads(pmic_prog_pads,
+ ARRAY_SIZE(pmic_prog_pads));
+ gpio_direction_output(PMIC_PROG_VOLTAGE, 0);
+
+ if (!((0 == i2c_set_bus_num(bus)) &&
+ (0 == i2c_probe(PFUZE100_I2C_ADDR)))) {
+ puts("i2c bus failed\n");
+ return CMD_RET_FAILURE;
+ }
+
+ for (i = 0; i < ARRAY_SIZE(pmic_otp_prog); i++) {
+ switch (pmic_otp_prog[i].cmd) {
+ case pmic_i2c:
+ val = (unsigned char) (pmic_otp_prog[i].value & 0xff);
+ if (i2c_write(PFUZE100_I2C_ADDR, pmic_otp_prog[i].reg,
+ 1, &val, 1)) {
+ printf("i2c write failed, reg 0x%2x, value 0x%2x\n",
+ pmic_otp_prog[i].reg, val);
+ return CMD_RET_FAILURE;
+ }
+ break;
+ case pmic_delay:
+ udelay(pmic_otp_prog[i].value * 1000);
+ break;
+ case pmic_vpgm:
+ gpio_direction_output(PMIC_PROG_VOLTAGE,
+ pmic_otp_prog[i].value);
+ break;
+ case pmic_pwr:
+ /* TODO */
+ break;
+ }
+ }
+ return CMD_RET_SUCCESS;
+}
+
+int do_pf0100_prog(cmd_tbl_t *cmdtp, int flag, int argc,
+ char * const argv[])
+{
+ int ret;
+ puts("Programming PMIC OTP...");
+ ret = pf0100_prog();
+ if (ret == CMD_RET_SUCCESS)
+ puts("done.\n");
+ else
+ puts("failed.\n");
+ return ret;
+}
+
+U_BOOT_CMD(
+ pf0100_otp_prog, 1, 0, do_pf0100_prog,
+ "Program the OTP fuses on the PMIC PF0100",
+ ""
+);
diff --git a/board/toradex/apalis_imx6/pf0100.h b/board/toradex/apalis_imx6/pf0100.h
new file mode 100644
index 0000000..c84cab8
--- /dev/null
+++ b/board/toradex/apalis_imx6/pf0100.h
@@ -0,0 +1,56 @@
+/*
+ * Copyright (C) 2014-2016, Toradex AG
+ *
+ * SPDX-License-Identifier: GPL-2.0+
+ */
+
+/*
+ * Helpers for Freescale PMIC PF0100
+*/
+
+#ifndef PF0100_H_
+#define PF0100_H_
+
+/* 7-bit I2C bus slave address */
+#define PFUZE100_I2C_ADDR (0x08)
+/* Register Addresses */
+#define PFUZE100_DEVICEID (0x0)
+#define PFUZE100_REVID (0x3)
+#define PFUZE100_SW1AMODE (0x23)
+#define PFUZE100_SW1ACON 36
+#define PFUZE100_SW1ACON_SPEED_VAL (0x1<<6) /*default */
+#define PFUZE100_SW1ACON_SPEED_M (0x3<<6)
+#define PFUZE100_SW1CCON 49
+#define PFUZE100_SW1CCON_SPEED_VAL (0x1<<6) /*default */
+#define PFUZE100_SW1CCON_SPEED_M (0x3<<6)
+#define PFUZE100_SW1AVOL 32
+#define PFUZE100_SW1AVOL_VSEL_M (0x3f<<0)
+#define PFUZE100_SW1CVOL 46
+#define PFUZE100_SW1CVOL_VSEL_M (0x3f<<0)
+#define PFUZE100_VGEN1CTL (0x6c)
+#define PFUZE100_VGEN1_VAL (0x30 + 0x08) /* Always ON, 1.2V */
+#define PFUZE100_SWBSTCTL (0x66)
+/* Always ON, Auto Switching Mode, 5.0V */
+#define PFUZE100_SWBST_VAL (0x40 + 0x08 + 0x00)
+
+/* chooses the extended page (registers 0x80..0xff) */
+#define PFUZE100_PAGE_REGISTER 0x7f
+#define PFUZE100_PAGE_REGISTER_PAGE_M (0x1f << 0)
+#define PFUZE100_PAGE_REGISTER_PAGE1 (0x01 & PFUZE100_PAGE_REGISTER_PAGE_M)
+#define PFUZE100_PAGE_REGISTER_PAGE2 (0x02 & PFUZE100_PAGE_REGISTER_PAGE_M)
+
+/* extended page 1 */
+#define PFUZE100_FUSE_POR1 0xe4
+#define PFUZE100_FUSE_POR2 0xe5
+#define PFUZE100_FUSE_POR3 0xe6
+#define PFUZE100_FUSE_POR_M (0x1 << 1)
+
+
+/* output some informational messages, return the number FUSE_POR=1 */
+/* i.e. 0: unprogrammed, 3: programmed, other: undefined prog. state */
+unsigned pmic_init(void);
+
+/* programmes OTP fuses to values required on a Toradex Apalis iMX6 */
+int pf0100_prog(void);
+
+#endif /* PF0100_H_ */
diff --git a/board/toradex/apalis_imx6/pf0100_otp.inc b/board/toradex/apalis_imx6/pf0100_otp.inc
new file mode 100644
index 0000000..59e0587
--- /dev/null
+++ b/board/toradex/apalis_imx6/pf0100_otp.inc
@@ -0,0 +1,191 @@
+/*
+ * Copyright (C) 2014-2016, Toradex AG
+ *
+ * SPDX-License-Identifier: GPL-2.0+
+ */
+
+// Register Output for PF0100 programmer
+// Customer: Toradex AG
+// Program: Apalis iMX6
+// Sample marking:
+// Date: 12.02.2014
+// Time: 17:16:41
+// Generated from Spreadsheet Revision: P1.8
+
+/* sed commands to get from programmer script to struct */
+/* sed -e 's/^WRITE_I2C:\(..\):\(..\)/\{pmic_i2c, 0x\1, 0x\2\},/g' -e 's/^DELAY:\([0-9]*\)/\{pmic_delay, 0, \1\},/g' pf0100_otp.txt > pf0100_otp.inc
+ sed -i -e 's/^VPGM:ON/\{pmic_vpgm, 0, 1},/g' -e 's/^VPGM:OFF/\{pmic_vpgm, 0, 0},/g' pf0100_otp.inc
+ sed -i -e 's/^PWRON: HIGH/\{pmic_pwr, 0, 1},/g' -e 's/^PWRON:LOW/\{pmic_pwr, 0, 0},/g' pf0100_otp.inc */
+
+enum { pmic_i2c, pmic_delay, pmic_vpgm, pmic_pwr };
+struct pmic_otp_prog_t{
+ unsigned char cmd;
+ unsigned char reg;
+ unsigned short value;
+};
+
+struct pmic_otp_prog_t pmic_otp_prog[] = {
+{pmic_i2c, 0x7F, 0x01}, // Access FSL EXT Page 1
+{pmic_i2c, 0xA0, 0x2B}, // Auto gen from Row94
+{pmic_i2c, 0xA1, 0x01}, // Auto gen from Row95
+{pmic_i2c, 0xA2, 0x05}, // Auto gen from Row96
+{pmic_i2c, 0xA8, 0x2B}, // Auto gen from Row102
+{pmic_i2c, 0xA9, 0x02}, // Auto gen from Row103
+{pmic_i2c, 0xAA, 0x01}, // Auto gen from Row104
+{pmic_i2c, 0xAC, 0x18}, // Auto gen from Row106
+{pmic_i2c, 0xAE, 0x01}, // Auto gen from Row108
+{pmic_i2c, 0xB0, 0x2C}, // Auto gen from Row110
+{pmic_i2c, 0xB1, 0x04}, // Auto gen from Row111
+{pmic_i2c, 0xB2, 0x01}, // Auto gen from Row112
+{pmic_i2c, 0xB4, 0x2C}, // Auto gen from Row114
+{pmic_i2c, 0xB5, 0x04}, // Auto gen from Row115
+{pmic_i2c, 0xB6, 0x01}, // Auto gen from Row116
+{pmic_i2c, 0xB8, 0x18}, // Auto gen from Row118
+{pmic_i2c, 0xBA, 0x01}, // Auto gen from Row120
+{pmic_i2c, 0xBD, 0x1F}, // Auto gen from Row123
+{pmic_i2c, 0xC0, 0x06}, // Auto gen from Row126
+{pmic_i2c, 0xC4, 0x04}, // Auto gen from Row130
+{pmic_i2c, 0xC8, 0x0E}, // Auto gen from Row134
+{pmic_i2c, 0xC9, 0x08}, // Auto gen from Row135
+{pmic_i2c, 0xCC, 0x0E}, // Auto gen from Row138
+{pmic_i2c, 0xCD, 0x05}, // Auto gen from Row139
+{pmic_i2c, 0xD0, 0x0C}, // Auto gen from Row142
+{pmic_i2c, 0xD1, 0x05}, // Auto gen from Row143
+{pmic_i2c, 0xD5, 0x07}, // Auto gen from Row147
+{pmic_i2c, 0xD8, 0x07}, // Auto gen from Row150
+{pmic_i2c, 0xD9, 0x06}, // Auto gen from Row151
+{pmic_i2c, 0xDC, 0x0A}, // Auto gen from Row154
+{pmic_i2c, 0xDD, 0x03}, // Auto gen from Row155
+{pmic_i2c, 0xE0, 0x07}, // Auto gen from Row158
+
+#if 0 /* TBB mode */
+{pmic_i2c, 0xE4, 0x80}, // TBB_POR = 1
+{pmic_delay, 0, 10},
+#else
+// Write OTP
+{pmic_i2c, 0xE4, 0x02}, // FUSE POR1=1
+{pmic_i2c, 0xE5, 0x02}, // FUSE POR2=1
+{pmic_i2c, 0xE6, 0x02}, // FUSE POR3=1
+{pmic_i2c, 0xF0, 0x1F}, // Enable ECC for fuse banks 1 to 5 by writing to OTP EN ECC0 register
+{pmic_i2c, 0xF1, 0x1F}, // Enable ECC for fuse banks 6 to 10 by writing to OTP EN ECC1 register
+{pmic_i2c, 0x7F, 0x02}, // Access PF0100 EXT Page2
+{pmic_i2c, 0xD0, 0x1F}, // Set Auto ECC for fuse banks 1 to 5 by writing to OTP AUTO ECC0 register
+{pmic_i2c, 0xD1, 0x1F}, // Set Auto ECC for fuse banks 6 to 10 by writing to OTP AUTO ECC1 register
+//-----------------------------------------------------------------------------------
+{pmic_i2c, 0xF1, 0x00}, // Reset Bank 1 ANTIFUSE_RW and ANTIFUSE_BYPASS bits
+{pmic_i2c, 0xF2, 0x00}, // Reset Bank 2 ANTIFUSE_RW and ANTIFUSE_BYPASS bits
+{pmic_i2c, 0xF3, 0x00}, // Reset Bank 3 ANTIFUSE_RW and ANTIFUSE_BYPASS bits
+{pmic_i2c, 0xF4, 0x00}, // Reset Bank 4 ANTIFUSE_RW and ANTIFUSE_BYPASS bits
+{pmic_i2c, 0xF5, 0x00}, // Reset Bank 5 ANTIFUSE_RW and ANTIFUSE_BYPASS bits
+{pmic_i2c, 0xF6, 0x00}, // Reset Bank 6 ANTIFUSE_RW and ANTIFUSE_BYPASS bits
+{pmic_i2c, 0xF7, 0x00}, // Reset Bank 7 ANTIFUSE_RW and ANTIFUSE_BYPASS bits
+{pmic_i2c, 0xF8, 0x00}, // Reset Bank 8 ANTIFUSE_RW and ANTIFUSE_BYPASS bits
+{pmic_i2c, 0xF9, 0x00}, // Reset Bank 9 ANTIFUSE_RW and ANTIFUSE_BYPASS bits
+{pmic_i2c, 0xFA, 0x00}, // Reset Bank 10 ANTIFUSE_RW and ANTIFUSE_BYPASS bits
+//-----------------------------------------------------------------------------------
+{pmic_vpgm, 0, 1}, // Turn ON 8V SWBST
+//VPGM:DOWN:n
+//VPGM:UP:n
+{pmic_delay, 0, 500}, // Adds 500msec delay to allow VPGM time to ramp up
+//-----------------------------------------------------------------------------------
+// PF0100 OTP MANUAL-PROGRAMMING (BANK 1 thru 10)
+//-----------------------------------------------------------------------------------
+// BANK 1
+//-----------------------------------------------------------------------------------
+{pmic_i2c, 0xF1, 0x00}, // Reset Bank 1 ANTIFUSE_RW and ANTIFUSE_BYPASS bits
+{pmic_i2c, 0xF1, 0x03}, // Set Bank 1 ANTIFUSE_RW and ANTIFUSE_BYPASS bits
+{pmic_i2c, 0xF1, 0x0B}, // Set Bank 1 ANTIFUSE_EN
+{pmic_delay, 0, 10}, // Allow time for bank programming to complete
+{pmic_i2c, 0xF1, 0x03}, // Reset Bank 1 ANTIFUSE_EN
+{pmic_i2c, 0xF1, 0x00}, // Reset Bank 1 ANTIFUSE_RW and ANTIFUSE_BYPASS bits
+//-----------------------------------------------------------------------------------
+// BANK 2
+//-----------------------------------------------------------------------------------
+{pmic_i2c, 0xF2, 0x00}, // Reset Bank 2 ANTIFUSE_RW and ANTIFUSE_BYPASS bits
+{pmic_i2c, 0xF2, 0x03}, // Set Bank 2 ANTIFUSE_RW and ANTIFUSE_BYPASS bits
+{pmic_i2c, 0xF2, 0x0B}, // Set Bank 2 ANTIFUSE_EN
+{pmic_delay, 0, 10}, // Allow time for bank programming to complete
+{pmic_i2c, 0xF2, 0x03}, // Reset Bank 2 ANTIFUSE_EN
+{pmic_i2c, 0xF2, 0x00}, // Reset Bank 2 ANTIFUSE_RW and ANTIFUSE_BYPASS bits
+//-----------------------------------------------------------------------------------
+// BANK 3
+//-----------------------------------------------------------------------------------
+{pmic_i2c, 0xF3, 0x00}, // Reset Bank 3 ANTIFUSE_RW and ANTIFUSE_BYPASS bits
+{pmic_i2c, 0xF3, 0x03}, // Set Bank 3 ANTIFUSE_RW and ANTIFUSE_BYPASS bits
+{pmic_i2c, 0xF3, 0x0B}, // Set Bank 3 ANTIFUSE_EN
+{pmic_delay, 0, 10}, // Allow time for bank programming to complete
+{pmic_i2c, 0xF3, 0x03}, // Reset Bank 3 ANTIFUSE_EN
+{pmic_i2c, 0xF3, 0x00}, // Reset Bank 3 ANTIFUSE_RW and ANTIFUSE_BYPASS bits
+//-----------------------------------------------------------------------------------
+// BANK 4
+//-----------------------------------------------------------------------------------
+{pmic_i2c, 0xF4, 0x00}, // Reset Bank 4 ANTIFUSE_RW and ANTIFUSE_BYPASS bits
+{pmic_i2c, 0xF4, 0x03}, // Set Bank 4 ANTIFUSE_RW and ANTIFUSE_BYPASS bits
+{pmic_i2c, 0xF4, 0x0B}, // Set Bank 4 ANTIFUSE_EN
+{pmic_delay, 0, 10}, // Allow time for bank programming to complete
+{pmic_i2c, 0xF4, 0x03}, // Reset Bank 4 ANTIFUSE_EN
+{pmic_i2c, 0xF4, 0x00}, // Reset Bank 4 ANTIFUSE_RW and ANTIFUSE_BYPASS bits
+//-----------------------------------------------------------------------------------
+// BANK 5
+//-----------------------------------------------------------------------------------
+{pmic_i2c, 0xF5, 0x00}, // Reset Bank 5 ANTIFUSE_RW and ANTIFUSE_BYPASS bits
+{pmic_i2c, 0xF5, 0x03}, // Set Bank 5 ANTIFUSE_RW and ANTIFUSE_BYPASS bits
+{pmic_i2c, 0xF5, 0x0B}, // Set Bank 5 ANTIFUSE_EN
+{pmic_delay, 0, 10}, // Allow time for bank programming to complete
+{pmic_i2c, 0xF5, 0x03}, // Reset Bank 5 ANTIFUSE_EN
+{pmic_i2c, 0xF5, 0x00}, // Reset Bank 5 ANTIFUSE_RW and ANTIFUSE_BYPASS bits
+//-----------------------------------------------------------------------------------
+// BANK 6
+//-----------------------------------------------------------------------------------
+{pmic_i2c, 0xF6, 0x00}, // Reset Bank 6 ANTIFUSE_RW and ANTIFUSE_BYPASS bits
+{pmic_i2c, 0xF6, 0x03}, // Set Bank 6 ANTIFUSE_RW and ANTIFUSE_BYPASS bits
+{pmic_i2c, 0xF6, 0x0B}, // Set Bank 6 ANTIFUSE_EN
+{pmic_delay, 0, 10}, // Allow time for bank programming to complete
+{pmic_i2c, 0xF6, 0x03}, // Reset Bank 6 ANTIFUSE_EN
+{pmic_i2c, 0xF6, 0x00}, // Reset Bank 6 ANTIFUSE_RW and ANTIFUSE_BYPASS bits
+//-----------------------------------------------------------------------------------
+// BANK 7
+//-----------------------------------------------------------------------------------
+{pmic_i2c, 0xF7, 0x00}, // Reset Bank 7 ANTIFUSE_RW and ANTIFUSE_BYPASS bits
+{pmic_i2c, 0xF7, 0x03}, // Set Bank 7 ANTIFUSE_RW and ANTIFUSE_BYPASS bits
+{pmic_i2c, 0xF7, 0x0B}, // Set Bank 7 ANTIFUSE_EN
+{pmic_delay, 0, 10}, // Allow time for bank programming to complete
+{pmic_i2c, 0xF7, 0x03}, // Reset Bank 7 ANTIFUSE_EN
+{pmic_i2c, 0xF7, 0x00}, // Reset Bank 7 ANTIFUSE_RW and ANTIFUSE_BYPASS bits
+//-----------------------------------------------------------------------------------
+// BANK 8
+//-----------------------------------------------------------------------------------
+{pmic_i2c, 0xF8, 0x00}, // Reset Bank 8 ANTIFUSE_RW and ANTIFUSE_BYPASS bits
+{pmic_i2c, 0xF8, 0x03}, // Set Bank 8 ANTIFUSE_RW and ANTIFUSE_BYPASS bits
+{pmic_i2c, 0xF8, 0x0B}, // Set Bank 8 ANTIFUSE_EN
+{pmic_delay, 0, 10}, // Allow time for bank programming to complete
+{pmic_i2c, 0xF8, 0x03}, // Reset Bank 8 ANTIFUSE_EN
+{pmic_i2c, 0xF8, 0x00}, // Reset Bank 8 ANTIFUSE_RW and ANTIFUSE_BYPASS bits
+//-----------------------------------------------------------------------------------
+// BANK 9
+//-----------------------------------------------------------------------------------
+{pmic_i2c, 0xF9, 0x00}, // Reset Bank 9 ANTIFUSE_RW and ANTIFUSE_BYPASS bits
+{pmic_i2c, 0xF9, 0x03}, // Set Bank 9 ANTIFUSE_RW and ANTIFUSE_BYPASS bits
+{pmic_i2c, 0xF9, 0x0B}, // Set Bank 9 ANTIFUSE_EN
+{pmic_delay, 0, 10}, // Allow time for bank programming to complete
+{pmic_i2c, 0xF9, 0x03}, // Reset Bank 9 ANTIFUSE_EN
+{pmic_i2c, 0xF9, 0x00}, // Reset Bank 9 ANTIFUSE_RW and ANTIFUSE_BYPASS bits
+//-----------------------------------------------------------------------------------
+// BANK 10
+//-----------------------------------------------------------------------------------
+{pmic_i2c, 0xFA, 0x00}, // Reset Bank 10 ANTIFUSE_RW and ANTIFUSE_BYPASS bits
+{pmic_i2c, 0xFA, 0x03}, // Set Bank 10 ANTIFUSE_RW and ANTIFUSE_BYPASS bits
+{pmic_i2c, 0xFA, 0x0B}, // Set Bank 10 ANTIFUSE_EN
+{pmic_delay, 0, 10}, // Allow time for bank programming to complete
+{pmic_i2c, 0xFA, 0x03}, // Reset Bank 10 ANTIFUSE_EN
+{pmic_i2c, 0xFA, 0x00}, // Reset Bank 10 ANTIFUSE_RW and ANTIFUSE_BYPASS bits
+//-----------------------------------------------------------------------------------
+{pmic_vpgm, 0, 0}, // Turn off 8V SWBST
+{pmic_delay, 0, 500}, // Adds delay to allow VPGM to bleed off
+{pmic_i2c, 0xD0, 0x00}, // Clear
+{pmic_i2c, 0xD1, 0x00}, // Clear
+{pmic_pwr, 0, 0}, // PWRON LOW to reload new OTP data
+{pmic_delay, 0, 500},
+{pmic_pwr, 0, 1},
+#endif
+};
\ No newline at end of file
diff --git a/board/toradex/apalis_t30/apalis_t30.c b/board/toradex/apalis_t30/apalis_t30.c
index 3d83491..827eefd 100644
--- a/board/toradex/apalis_t30/apalis_t30.c
+++ b/board/toradex/apalis_t30/apalis_t30.c
@@ -14,6 +14,7 @@
#include <asm/io.h>
#include <dm.h>
#include <i2c.h>
+#include "../common/tdx-common.h"
#include "pinmux-config-apalis_t30.h"
@@ -39,6 +40,13 @@
return 0;
}
+#if defined(CONFIG_OF_LIBFDT) && defined(CONFIG_OF_BOARD_SETUP)
+int ft_board_setup(void *blob, bd_t *bd)
+{
+ return ft_common_board_setup(blob, bd);
+}
+#endif
+
/*
* Routine: pinmux_init
* Description: Do individual peripheral pinmux configs
diff --git a/board/toradex/colibri_imx6/800mhz_2x64mx16.cfg b/board/toradex/colibri_imx6/800mhz_2x64mx16.cfg
new file mode 100644
index 0000000..660f9d3
--- /dev/null
+++ b/board/toradex/colibri_imx6/800mhz_2x64mx16.cfg
@@ -0,0 +1,59 @@
+/*
+ * Copyright (C) 2013 Boundary Devices
+ * Copyright (C) 2014-2016, Toradex AG
+ *
+ * SPDX-License-Identifier: GPL-2.0+
+ */
+
+DATA 4, MX6_MMDC_P0_MDPDC, 0x0002002D
+DATA 4, MX6_MMDC_P0_MDCFG0, 0x2C305503
+DATA 4, MX6_MMDC_P0_MDCFG1, 0xB66D8D63
+DATA 4, MX6_MMDC_P0_MDCFG2, 0x01FF00DB
+DATA 4, MX6_MMDC_P0_MDRWD, 0x000026D2
+DATA 4, MX6_MMDC_P0_MDOR, 0x00301023
+DATA 4, MX6_MMDC_P0_MDOTC, 0x00333030
+DATA 4, MX6_MMDC_P0_MDPDC, 0x0002556D
+/* CS0 End: 7MSB of ((0x10000000 + 512M) -1) >> 25 */
+DATA 4, MX6_MMDC_P0_MDASP, 0x00000017
+/* DDR3 DATA BUS SIZE: 64BIT */
+/* DATA 4, MX6_MMDC_P0_MDCTL, 0x821A0000 */
+/* DDR3 DATA BUS SIZE: 32BIT */
+DATA 4, MX6_MMDC_P0_MDCTL, 0x82190000
+
+/* Write commands to DDR */
+/* Load Mode Registers */
+/* TODO Use Auto Self-Refresh mode (Extended Temperature)*/
+/* DATA 4, MX6_MMDC_P0_MDSCR, 0x04408032 */
+DATA 4, MX6_MMDC_P0_MDSCR, 0x04008032
+DATA 4, MX6_MMDC_P0_MDSCR, 0x00008033
+DATA 4, MX6_MMDC_P0_MDSCR, 0x00048031
+DATA 4, MX6_MMDC_P0_MDSCR, 0x13208030
+/* ZQ calibration */
+DATA 4, MX6_MMDC_P0_MDSCR, 0x04008040
+
+DATA 4, MX6_MMDC_P0_MPZQHWCTRL, 0xA1390003
+DATA 4, MX6_MMDC_P1_MPZQHWCTRL, 0xA1390003
+DATA 4, MX6_MMDC_P0_MDREF, 0x00005800
+
+DATA 4, MX6_MMDC_P0_MPODTCTRL, 0x00000000
+DATA 4, MX6_MMDC_P1_MPODTCTRL, 0x00000000
+
+DATA 4, MX6_MMDC_P0_MPDGCTRL0, 0x42360232
+DATA 4, MX6_MMDC_P0_MPDGCTRL1, 0x021F022A
+DATA 4, MX6_MMDC_P1_MPDGCTRL0, 0x421E0224
+DATA 4, MX6_MMDC_P1_MPDGCTRL1, 0x02110218
+
+DATA 4, MX6_MMDC_P0_MPRDDLCTL, 0x41434344
+DATA 4, MX6_MMDC_P1_MPRDDLCTL, 0x4345423E
+DATA 4, MX6_MMDC_P0_MPWRDLCTL, 0x39383339
+DATA 4, MX6_MMDC_P1_MPWRDLCTL, 0x3E363930
+
+DATA 4, MX6_MMDC_P0_MPWLDECTRL0, 0x00340039
+DATA 4, MX6_MMDC_P0_MPWLDECTRL1, 0x002C002D
+DATA 4, MX6_MMDC_P1_MPWLDECTRL0, 0x00120019
+DATA 4, MX6_MMDC_P1_MPWLDECTRL1, 0x0012002D
+
+DATA 4, MX6_MMDC_P0_MPMUR0, 0x00000800
+DATA 4, MX6_MMDC_P1_MPMUR0, 0x00000800
+DATA 4, MX6_MMDC_P0_MDSCR, 0x00000000
+DATA 4, MX6_MMDC_P0_MAPSR, 0x00011006
diff --git a/board/toradex/colibri_imx6/800mhz_4x64mx16.cfg b/board/toradex/colibri_imx6/800mhz_4x64mx16.cfg
new file mode 100644
index 0000000..3bd8576
--- /dev/null
+++ b/board/toradex/colibri_imx6/800mhz_4x64mx16.cfg
@@ -0,0 +1,59 @@
+/*
+ * Copyright (C) 2013 Boundary Devices
+ * Copyright (C) 2014-2016, Toradex AG
+ *
+ * SPDX-License-Identifier: GPL-2.0+
+ */
+
+DATA 4, MX6_MMDC_P0_MDPDC, 0x0002002D
+DATA 4, MX6_MMDC_P0_MDCFG0, 0x2C305503
+DATA 4, MX6_MMDC_P0_MDCFG1, 0xB66D8D63
+DATA 4, MX6_MMDC_P0_MDCFG2, 0x01FF00DB
+DATA 4, MX6_MMDC_P0_MDRWD, 0x000026D2
+DATA 4, MX6_MMDC_P0_MDOR, 0x00301023
+DATA 4, MX6_MMDC_P0_MDOTC, 0x00333030
+DATA 4, MX6_MMDC_P0_MDPDC, 0x0002556D
+/* CS0 End: 7MSB of ((0x10000000 + 512M) -1) >> 25 */
+DATA 4, MX6_MMDC_P0_MDASP, 0x00000017
+/* DDR3 DATA BUS SIZE: 64BIT */
+DATA 4, MX6_MMDC_P0_MDCTL, 0x821A0000
+/* DDR3 DATA BUS SIZE: 32BIT */
+/* DATA 4, MX6_MMDC_P0_MDCTL, 0x82190000 */
+
+/* Write commands to DDR */
+/* Load Mode Registers */
+/* TODO Use Auto Self-Refresh mode (Extended Temperature)*/
+/* DATA 4, MX6_MMDC_P0_MDSCR, 0x04408032 */
+DATA 4, MX6_MMDC_P0_MDSCR, 0x04008032
+DATA 4, MX6_MMDC_P0_MDSCR, 0x00008033
+DATA 4, MX6_MMDC_P0_MDSCR, 0x00048031
+DATA 4, MX6_MMDC_P0_MDSCR, 0x13208030
+/* ZQ calibration */
+DATA 4, MX6_MMDC_P0_MDSCR, 0x04008040
+
+DATA 4, MX6_MMDC_P0_MPZQHWCTRL, 0xA1390003
+DATA 4, MX6_MMDC_P1_MPZQHWCTRL, 0xA1390003
+DATA 4, MX6_MMDC_P0_MDREF, 0x00005800
+
+DATA 4, MX6_MMDC_P0_MPODTCTRL, 0x00000000
+DATA 4, MX6_MMDC_P1_MPODTCTRL, 0x00000000
+
+DATA 4, MX6_MMDC_P0_MPDGCTRL0, 0x42360232
+DATA 4, MX6_MMDC_P0_MPDGCTRL1, 0x021F022A
+DATA 4, MX6_MMDC_P1_MPDGCTRL0, 0x421E0224
+DATA 4, MX6_MMDC_P1_MPDGCTRL1, 0x02110218
+
+DATA 4, MX6_MMDC_P0_MPRDDLCTL, 0x41434344
+DATA 4, MX6_MMDC_P1_MPRDDLCTL, 0x4345423E
+DATA 4, MX6_MMDC_P0_MPWRDLCTL, 0x39383339
+DATA 4, MX6_MMDC_P1_MPWRDLCTL, 0x3E363930
+
+DATA 4, MX6_MMDC_P0_MPWLDECTRL0, 0x00340039
+DATA 4, MX6_MMDC_P0_MPWLDECTRL1, 0x002C002D
+DATA 4, MX6_MMDC_P1_MPWLDECTRL0, 0x00120019
+DATA 4, MX6_MMDC_P1_MPWLDECTRL1, 0x0012002D
+
+DATA 4, MX6_MMDC_P0_MPMUR0, 0x00000800
+DATA 4, MX6_MMDC_P1_MPMUR0, 0x00000800
+DATA 4, MX6_MMDC_P0_MDSCR, 0x00000000
+DATA 4, MX6_MMDC_P0_MAPSR, 0x00011006
diff --git a/board/toradex/colibri_imx6/Kconfig b/board/toradex/colibri_imx6/Kconfig
new file mode 100644
index 0000000..d2ad1ce
--- /dev/null
+++ b/board/toradex/colibri_imx6/Kconfig
@@ -0,0 +1,44 @@
+if TARGET_COLIBRI_IMX6
+
+config SYS_BOARD
+ default "colibri_imx6"
+
+config SYS_CONFIG_NAME
+ default "colibri_imx6"
+
+config SYS_CPU
+ default "armv7"
+
+config SYS_SOC
+ default "mx6"
+
+config SYS_VENDOR
+ default "toradex"
+
+config TDX_CFG_BLOCK
+ default y
+
+config TDX_HAVE_MMC
+ default y
+
+config TDX_CFG_BLOCK_DEV
+ default "0"
+
+config TDX_CFG_BLOCK_PART
+ default "1"
+
+# Toradex config block in eMMC, at the end of 1st "boot sector"
+config TDX_CFG_BLOCK_OFFSET
+ default "-512"
+
+config TDX_CMD_IMX_MFGR
+ bool "Enable factory testing commands for Toradex iMX 6 modules"
+ help
+ This adds the commands
+ pf0100_otp_prog - Program the OTP fuses on the PMIC PF0100
+ If executed on already fused modules it doesn't change any fuse setting.
+ default y
+
+source "board/toradex/common/Kconfig"
+
+endif
diff --git a/board/toradex/colibri_imx6/MAINTAINERS b/board/toradex/colibri_imx6/MAINTAINERS
new file mode 100644
index 0000000..1cc7ef2
--- /dev/null
+++ b/board/toradex/colibri_imx6/MAINTAINERS
@@ -0,0 +1,8 @@
+Colibri iMX6
+M: Max Krummenacher <max.krummenacher@toradex.com>
+W: http://developer.toradex.com/software/linux/linux-software
+S: Maintained
+F: board/toradex/colibri_imx6/
+F: include/configs/colibri_imx6.h
+F: configs/colibri_imx6_defconfig
+F: configs/colibri_imx6_nospl_defconfig
diff --git a/board/toradex/colibri_imx6/Makefile b/board/toradex/colibri_imx6/Makefile
new file mode 100644
index 0000000..c81bc2d
--- /dev/null
+++ b/board/toradex/colibri_imx6/Makefile
@@ -0,0 +1,5 @@
+# Copyright (c) 2012-2014 Toradex, Inc.
+# SPDX-License-Identifier: GPL-2.0+
+
+obj-y := colibri_imx6.o do_fuse.o
+obj-$(CONFIG_TDX_CMD_IMX_MFGR) += pf0100.o
diff --git a/board/toradex/colibri_imx6/clocks.cfg b/board/toradex/colibri_imx6/clocks.cfg
new file mode 100644
index 0000000..be96094
--- /dev/null
+++ b/board/toradex/colibri_imx6/clocks.cfg
@@ -0,0 +1,42 @@
+/*
+ * Copyright (C) 2013 Boundary Devices
+ * Copyright (C) 2014-2016, Toradex AG
+ *
+ * SPDX-License-Identifier: GPL-2.0+
+ *
+ * Device Configuration Data (DCD)
+ *
+ * Each entry must have the format:
+ * Addr-type Address Value
+ *
+ * where:
+ * Addr-type register length (1,2 or 4 bytes)
+ * Address absolute address of the register
+ * value value to be stored in the register
+ */
+
+/* set the default clock gate to save power */
+DATA 4, CCM_CCGR0, 0x00C03F3F
+DATA 4, CCM_CCGR1, 0x0030FC03
+DATA 4, CCM_CCGR2, 0x0FFFC000
+DATA 4, CCM_CCGR3, 0x3FF00000
+DATA 4, CCM_CCGR4, 0x00FFF300
+DATA 4, CCM_CCGR5, 0x0F0000C3
+DATA 4, CCM_CCGR6, 0x000003FF
+
+/* enable AXI cache for VDOA/VPU/IPU */
+DATA 4, MX6_IOMUXC_GPR4, 0xF00000CF
+/* set IPU AXI-id0 Qos=0xf(bypass) AXI-id1 Qos=0x7 */
+DATA 4, MX6_IOMUXC_GPR6, 0x007F007F
+DATA 4, MX6_IOMUXC_GPR7, 0x007F007F
+
+/*
+ * Setup CCM_CCOSR register as follows:
+ *
+ * cko1_en = 1 --> CKO1 enabled
+ * cko1_div = 111 --> divide by 8
+ * cko1_sel = 1011 --> ahb_clk_root
+ *
+ * This sets CKO1 at ahb_clk_root/8 = 132/8 = 16.5 MHz
+ */
+DATA 4, CCM_CCOSR, 0x000000fb
diff --git a/board/toradex/colibri_imx6/colibri_imx6.c b/board/toradex/colibri_imx6/colibri_imx6.c
new file mode 100644
index 0000000..d070677
--- /dev/null
+++ b/board/toradex/colibri_imx6/colibri_imx6.c
@@ -0,0 +1,1130 @@
+/*
+ * Copyright (C) 2010-2013 Freescale Semiconductor, Inc.
+ * Copyright (C) 2013, Boundary Devices <info@boundarydevices.com>
+ * Copyright (C) 2014-2016, Toradex AG
+ * copied from nitrogen6x
+ *
+ * SPDX-License-Identifier: GPL-2.0+
+ */
+
+#include <common.h>
+#include <asm/arch/clock.h>
+#include <asm/arch/crm_regs.h>
+#include <asm/arch/imx-regs.h>
+#include <asm/arch/iomux.h>
+#include <asm/arch/mx6-pins.h>
+#include <asm/arch/mx6-ddr.h>
+#include <asm/arch/mxc_hdmi.h>
+#include <asm/arch/sys_proto.h>
+#include <asm/bootm.h>
+#include <asm/gpio.h>
+#include <asm/imx-common/iomux-v3.h>
+#include <asm/imx-common/mxc_i2c.h>
+#include <asm/imx-common/sata.h>
+#include <asm/imx-common/boot_mode.h>
+#include <asm/imx-common/video.h>
+#include <asm/io.h>
+#include <dm/platform_data/serial_mxc.h>
+#include <dm/platdata.h>
+#include <fsl_esdhc.h>
+#include <i2c.h>
+#include <imx_thermal.h>
+#include <linux/errno.h>
+#include <malloc.h>
+#include <micrel.h>
+#include <miiphy.h>
+#include <mmc.h>
+#include <netdev.h>
+
+#include "../common/tdx-cfg-block.h"
+#ifdef CONFIG_TDX_CMD_IMX_MFGR
+#include "pf0100.h"
+#endif
+
+DECLARE_GLOBAL_DATA_PTR;
+
+#define UART_PAD_CTRL (PAD_CTL_PUS_100K_UP | \
+ PAD_CTL_SPEED_MED | PAD_CTL_DSE_40ohm | \
+ PAD_CTL_SRE_FAST | PAD_CTL_HYS)
+
+#define USDHC_PAD_CTRL (PAD_CTL_PUS_47K_UP | \
+ PAD_CTL_SPEED_LOW | PAD_CTL_DSE_80ohm | \
+ PAD_CTL_SRE_FAST | PAD_CTL_HYS)
+
+#define ENET_PAD_CTRL (PAD_CTL_PUS_100K_UP | \
+ PAD_CTL_SPEED_MED | PAD_CTL_DSE_40ohm | PAD_CTL_HYS)
+
+#define SPI_PAD_CTRL (PAD_CTL_HYS | PAD_CTL_SPEED_MED | \
+ PAD_CTL_DSE_40ohm | PAD_CTL_SRE_FAST)
+
+#define BUTTON_PAD_CTRL (PAD_CTL_PUS_100K_UP | \
+ PAD_CTL_SPEED_MED | PAD_CTL_DSE_40ohm | PAD_CTL_HYS)
+
+#define I2C_PAD_CTRL (PAD_CTL_PUS_100K_UP | \
+ PAD_CTL_SPEED_MED | PAD_CTL_DSE_40ohm | PAD_CTL_HYS | \
+ PAD_CTL_ODE | PAD_CTL_SRE_FAST)
+
+#define WEAK_PULLUP (PAD_CTL_PUS_100K_UP | \
+ PAD_CTL_SPEED_MED | PAD_CTL_DSE_40ohm | PAD_CTL_HYS | \
+ PAD_CTL_SRE_SLOW)
+
+#define NO_PULLUP ( \
+ PAD_CTL_SPEED_MED | PAD_CTL_DSE_40ohm | PAD_CTL_HYS | \
+ PAD_CTL_SRE_SLOW)
+
+#define WEAK_PULLDOWN (PAD_CTL_PUS_100K_DOWN | \
+ PAD_CTL_SPEED_MED | PAD_CTL_DSE_40ohm | \
+ PAD_CTL_HYS | PAD_CTL_SRE_SLOW)
+
+#define OUTPUT_40OHM (PAD_CTL_SPEED_MED|PAD_CTL_DSE_40ohm)
+
+#define OUTPUT_RGB (PAD_CTL_SPEED_MED|PAD_CTL_DSE_60ohm|PAD_CTL_SRE_FAST)
+
+int dram_init(void)
+{
+ /* use the DDR controllers configured size */
+ gd->ram_size = get_ram_size((void *)CONFIG_SYS_SDRAM_BASE,
+ (ulong)imx_ddr_size());
+
+ return 0;
+}
+
+/* Colibri UARTA */
+iomux_v3_cfg_t const uart1_pads[] = {
+ MX6_PAD_CSI0_DAT10__UART1_RX_DATA | MUX_PAD_CTRL(UART_PAD_CTRL),
+ MX6_PAD_CSI0_DAT11__UART1_TX_DATA | MUX_PAD_CTRL(UART_PAD_CTRL),
+};
+
+#define PC MUX_PAD_CTRL(I2C_PAD_CTRL)
+/* Colibri I2C */
+struct i2c_pads_info i2c_pad_info1 = {
+ .scl = {
+ .i2c_mode = MX6_PAD_GPIO_3__I2C3_SCL | PC,
+ .gpio_mode = MX6_PAD_GPIO_3__GPIO1_IO03 | PC,
+ .gp = IMX_GPIO_NR(1, 3)
+ },
+ .sda = {
+ .i2c_mode = MX6_PAD_GPIO_6__I2C3_SDA | PC,
+ .gpio_mode = MX6_PAD_GPIO_6__GPIO1_IO06 | PC,
+ .gp = IMX_GPIO_NR(1, 6)
+ }
+};
+
+/* Colibri local, PMIC, SGTL5000, STMPE811 */
+struct i2c_pads_info i2c_pad_info_loc = {
+ .scl = {
+ .i2c_mode = MX6_PAD_EIM_EB2__I2C2_SCL | PC,
+ .gpio_mode = MX6_PAD_EIM_EB2__GPIO2_IO30 | PC,
+ .gp = IMX_GPIO_NR(2, 30)
+ },
+ .sda = {
+ .i2c_mode = MX6_PAD_EIM_D16__I2C2_SDA | PC,
+ .gpio_mode = MX6_PAD_EIM_D16__GPIO3_IO16 | PC,
+ .gp = IMX_GPIO_NR(3, 16)
+ }
+};
+
+/* Apalis MMC */
+iomux_v3_cfg_t const usdhc1_pads[] = {
+ MX6_PAD_SD1_CLK__SD1_CLK | MUX_PAD_CTRL(USDHC_PAD_CTRL),
+ MX6_PAD_SD1_CMD__SD1_CMD | MUX_PAD_CTRL(USDHC_PAD_CTRL),
+ MX6_PAD_SD1_DAT0__SD1_DATA0 | MUX_PAD_CTRL(USDHC_PAD_CTRL),
+ MX6_PAD_SD1_DAT1__SD1_DATA1 | MUX_PAD_CTRL(USDHC_PAD_CTRL),
+ MX6_PAD_SD1_DAT2__SD1_DATA2 | MUX_PAD_CTRL(USDHC_PAD_CTRL),
+ MX6_PAD_SD1_DAT3__SD1_DATA3 | MUX_PAD_CTRL(USDHC_PAD_CTRL),
+ MX6_PAD_NANDF_D5__GPIO2_IO05 | MUX_PAD_CTRL(NO_PAD_CTRL), /* CD */
+# define GPIO_MMC_CD IMX_GPIO_NR(2, 5)
+};
+
+/* eMMC */
+iomux_v3_cfg_t const usdhc3_pads[] = {
+ MX6_PAD_SD3_CLK__SD3_CLK | MUX_PAD_CTRL(USDHC_PAD_CTRL),
+ MX6_PAD_SD3_CMD__SD3_CMD | MUX_PAD_CTRL(USDHC_PAD_CTRL),
+ MX6_PAD_SD3_DAT0__SD3_DATA0 | MUX_PAD_CTRL(USDHC_PAD_CTRL),
+ MX6_PAD_SD3_DAT1__SD3_DATA1 | MUX_PAD_CTRL(USDHC_PAD_CTRL),
+ MX6_PAD_SD3_DAT2__SD3_DATA2 | MUX_PAD_CTRL(USDHC_PAD_CTRL),
+ MX6_PAD_SD3_DAT3__SD3_DATA3 | MUX_PAD_CTRL(USDHC_PAD_CTRL),
+ MX6_PAD_SD3_DAT4__SD3_DATA4 | MUX_PAD_CTRL(USDHC_PAD_CTRL),
+ MX6_PAD_SD3_DAT5__SD3_DATA5 | MUX_PAD_CTRL(USDHC_PAD_CTRL),
+ MX6_PAD_SD3_DAT6__SD3_DATA6 | MUX_PAD_CTRL(USDHC_PAD_CTRL),
+ MX6_PAD_SD3_DAT7__SD3_DATA7 | MUX_PAD_CTRL(USDHC_PAD_CTRL),
+ MX6_PAD_SD3_RST__SD3_RESET | MUX_PAD_CTRL(USDHC_PAD_CTRL),
+};
+
+iomux_v3_cfg_t const enet_pads[] = {
+ MX6_PAD_ENET_MDC__ENET_MDC | MUX_PAD_CTRL(ENET_PAD_CTRL),
+ MX6_PAD_ENET_MDIO__ENET_MDIO | MUX_PAD_CTRL(ENET_PAD_CTRL),
+ MX6_PAD_ENET_RXD0__ENET_RX_DATA0 | MUX_PAD_CTRL(ENET_PAD_CTRL),
+ MX6_PAD_ENET_RXD1__ENET_RX_DATA1 | MUX_PAD_CTRL(ENET_PAD_CTRL),
+ MX6_PAD_ENET_RX_ER__ENET_RX_ER | MUX_PAD_CTRL(ENET_PAD_CTRL),
+ MX6_PAD_ENET_TX_EN__ENET_TX_EN | MUX_PAD_CTRL(ENET_PAD_CTRL),
+ MX6_PAD_ENET_TXD0__ENET_TX_DATA0 | MUX_PAD_CTRL(ENET_PAD_CTRL),
+ MX6_PAD_ENET_TXD1__ENET_TX_DATA1 | MUX_PAD_CTRL(ENET_PAD_CTRL),
+ MX6_PAD_ENET_CRS_DV__ENET_RX_EN | MUX_PAD_CTRL(ENET_PAD_CTRL),
+ MX6_PAD_GPIO_16__ENET_REF_CLK | MUX_PAD_CTRL(ENET_PAD_CTRL),
+};
+
+static void setup_iomux_enet(void)
+{
+ imx_iomux_v3_setup_multiple_pads(enet_pads, ARRAY_SIZE(enet_pads));
+}
+
+/* mux auxiliary pins to GPIO, so they can be used from the U-Boot cmdline */
+iomux_v3_cfg_t const gpio_pads[] = {
+ /* ADDRESS[17:18] [25] used as GPIO */
+ MX6_PAD_KEY_ROW2__GPIO4_IO11 | MUX_PAD_CTRL(WEAK_PULLUP),
+ MX6_PAD_KEY_COL2__GPIO4_IO10 | MUX_PAD_CTRL(WEAK_PULLUP),
+ MX6_PAD_NANDF_D1__GPIO2_IO01 | MUX_PAD_CTRL(WEAK_PULLUP),
+ /* ADDRESS[19:24] used as GPIO */
+ MX6_PAD_DISP0_DAT23__GPIO5_IO17 | MUX_PAD_CTRL(WEAK_PULLUP),
+ MX6_PAD_DISP0_DAT22__GPIO5_IO16 | MUX_PAD_CTRL(WEAK_PULLUP),
+ MX6_PAD_DISP0_DAT21__GPIO5_IO15 | MUX_PAD_CTRL(WEAK_PULLUP),
+ MX6_PAD_DISP0_DAT20__GPIO5_IO14 | MUX_PAD_CTRL(WEAK_PULLUP),
+ MX6_PAD_DISP0_DAT19__GPIO5_IO13 | MUX_PAD_CTRL(WEAK_PULLUP),
+ MX6_PAD_DISP0_DAT18__GPIO5_IO12 | MUX_PAD_CTRL(WEAK_PULLUP),
+ /* DATA[16:29] [31] used as GPIO */
+ MX6_PAD_EIM_LBA__GPIO2_IO27 | MUX_PAD_CTRL(WEAK_PULLUP),
+ MX6_PAD_EIM_BCLK__GPIO6_IO31 | MUX_PAD_CTRL(WEAK_PULLUP),
+ MX6_PAD_NANDF_CS3__GPIO6_IO16 | MUX_PAD_CTRL(WEAK_PULLUP),
+ MX6_PAD_NANDF_CS1__GPIO6_IO14 | MUX_PAD_CTRL(WEAK_PULLUP),
+ MX6_PAD_NANDF_RB0__GPIO6_IO10 | MUX_PAD_CTRL(WEAK_PULLUP),
+ MX6_PAD_NANDF_ALE__GPIO6_IO08 | MUX_PAD_CTRL(WEAK_PULLUP),
+ MX6_PAD_NANDF_WP_B__GPIO6_IO09 | MUX_PAD_CTRL(WEAK_PULLUP),
+ MX6_PAD_NANDF_CS0__GPIO6_IO11 | MUX_PAD_CTRL(WEAK_PULLUP),
+ MX6_PAD_NANDF_CLE__GPIO6_IO07 | MUX_PAD_CTRL(WEAK_PULLUP),
+ MX6_PAD_GPIO_19__GPIO4_IO05 | MUX_PAD_CTRL(WEAK_PULLUP),
+ MX6_PAD_CSI0_MCLK__GPIO5_IO19 | MUX_PAD_CTRL(WEAK_PULLUP),
+ MX6_PAD_CSI0_PIXCLK__GPIO5_IO18 | MUX_PAD_CTRL(WEAK_PULLUP),
+ MX6_PAD_GPIO_4__GPIO1_IO04 | MUX_PAD_CTRL(WEAK_PULLUP),
+ MX6_PAD_GPIO_5__GPIO1_IO05 | MUX_PAD_CTRL(WEAK_PULLUP),
+ MX6_PAD_GPIO_2__GPIO1_IO02 | MUX_PAD_CTRL(WEAK_PULLUP),
+ /* DQM[0:3] used as GPIO */
+ MX6_PAD_EIM_EB0__GPIO2_IO28 | MUX_PAD_CTRL(WEAK_PULLUP),
+ MX6_PAD_EIM_EB1__GPIO2_IO29 | MUX_PAD_CTRL(WEAK_PULLUP),
+ MX6_PAD_SD2_DAT2__GPIO1_IO13 | MUX_PAD_CTRL(WEAK_PULLUP),
+ MX6_PAD_NANDF_D0__GPIO2_IO00 | MUX_PAD_CTRL(WEAK_PULLUP),
+ /* RDY used as GPIO */
+ MX6_PAD_EIM_WAIT__GPIO5_IO00 | MUX_PAD_CTRL(WEAK_PULLUP),
+ /* ADDRESS[16] DATA[30] used as GPIO */
+ MX6_PAD_KEY_ROW4__GPIO4_IO15 | MUX_PAD_CTRL(WEAK_PULLDOWN),
+ MX6_PAD_KEY_COL4__GPIO4_IO14 | MUX_PAD_CTRL(WEAK_PULLUP),
+ /* CSI pins used as GPIO */
+ MX6_PAD_EIM_A24__GPIO5_IO04 | MUX_PAD_CTRL(WEAK_PULLUP),
+ MX6_PAD_SD2_CMD__GPIO1_IO11 | MUX_PAD_CTRL(WEAK_PULLUP),
+ MX6_PAD_NANDF_CS2__GPIO6_IO15 | MUX_PAD_CTRL(WEAK_PULLUP),
+ MX6_PAD_EIM_D18__GPIO3_IO18 | MUX_PAD_CTRL(WEAK_PULLUP),
+ MX6_PAD_EIM_A19__GPIO2_IO19 | MUX_PAD_CTRL(WEAK_PULLUP),
+ MX6_PAD_EIM_D29__GPIO3_IO29 | MUX_PAD_CTRL(WEAK_PULLDOWN),
+ MX6_PAD_EIM_A23__GPIO6_IO06 | MUX_PAD_CTRL(WEAK_PULLUP),
+ MX6_PAD_EIM_A20__GPIO2_IO18 | MUX_PAD_CTRL(WEAK_PULLUP),
+ MX6_PAD_EIM_A17__GPIO2_IO21 | MUX_PAD_CTRL(WEAK_PULLUP),
+ MX6_PAD_EIM_A18__GPIO2_IO20 | MUX_PAD_CTRL(WEAK_PULLUP),
+ MX6_PAD_EIM_EB3__GPIO2_IO31 | MUX_PAD_CTRL(WEAK_PULLUP),
+ MX6_PAD_EIM_D17__GPIO3_IO17 | MUX_PAD_CTRL(WEAK_PULLUP),
+ MX6_PAD_SD2_DAT0__GPIO1_IO15 | MUX_PAD_CTRL(WEAK_PULLUP),
+ /* GPIO */
+ MX6_PAD_EIM_D26__GPIO3_IO26 | MUX_PAD_CTRL(WEAK_PULLUP),
+ MX6_PAD_EIM_D27__GPIO3_IO27 | MUX_PAD_CTRL(WEAK_PULLUP),
+ MX6_PAD_NANDF_D6__GPIO2_IO06 | MUX_PAD_CTRL(WEAK_PULLUP),
+ MX6_PAD_NANDF_D3__GPIO2_IO03 | MUX_PAD_CTRL(WEAK_PULLUP),
+ MX6_PAD_ENET_REF_CLK__GPIO1_IO23 | MUX_PAD_CTRL(WEAK_PULLUP),
+ MX6_PAD_DI0_PIN4__GPIO4_IO20 | MUX_PAD_CTRL(WEAK_PULLUP),
+ MX6_PAD_SD4_DAT3__GPIO2_IO11 | MUX_PAD_CTRL(WEAK_PULLUP),
+ MX6_PAD_NANDF_D4__GPIO2_IO04 | MUX_PAD_CTRL(WEAK_PULLUP),
+ MX6_PAD_SD4_DAT0__GPIO2_IO08 | MUX_PAD_CTRL(WEAK_PULLUP),
+ MX6_PAD_GPIO_7__GPIO1_IO07 | MUX_PAD_CTRL(WEAK_PULLUP),
+ MX6_PAD_GPIO_8__GPIO1_IO08 | MUX_PAD_CTRL(WEAK_PULLUP),
+ /* USBH_OC */
+ MX6_PAD_EIM_D30__GPIO3_IO30 | MUX_PAD_CTRL(WEAK_PULLUP),
+ /* USBC_ID */
+ MX6_PAD_NANDF_D2__GPIO2_IO02 | MUX_PAD_CTRL(WEAK_PULLUP),
+ /* USBC_DET */
+ MX6_PAD_GPIO_17__GPIO7_IO12 | MUX_PAD_CTRL(WEAK_PULLUP),
+};
+
+static void setup_iomux_gpio(void)
+{
+ imx_iomux_v3_setup_multiple_pads(gpio_pads, ARRAY_SIZE(gpio_pads));
+}
+
+iomux_v3_cfg_t const usb_pads[] = {
+ /* USB_PE */
+ MX6_PAD_EIM_D31__GPIO3_IO31 | MUX_PAD_CTRL(NO_PAD_CTRL),
+# define GPIO_USBH_EN IMX_GPIO_NR(3, 31)
+};
+
+/*
+ * UARTs are used in DTE mode, switch the mode on all UARTs before
+ * any pinmuxing connects a (DCE) output to a transceiver output.
+ */
+#define UFCR 0x90 /* FIFO Control Register */
+#define UFCR_DCEDTE (1<<6) /* DCE=0 */
+
+static void setup_dtemode_uart(void)
+{
+ setbits_le32((u32 *)(UART1_BASE + UFCR), UFCR_DCEDTE);
+ setbits_le32((u32 *)(UART2_BASE + UFCR), UFCR_DCEDTE);
+ setbits_le32((u32 *)(UART3_BASE + UFCR), UFCR_DCEDTE);
+}
+
+static void setup_iomux_uart(void)
+{
+ setup_dtemode_uart();
+ imx_iomux_v3_setup_multiple_pads(uart1_pads, ARRAY_SIZE(uart1_pads));
+}
+
+#ifdef CONFIG_USB_EHCI_MX6
+int board_ehci_hcd_init(int port)
+{
+ imx_iomux_v3_setup_multiple_pads(usb_pads, ARRAY_SIZE(usb_pads));
+ return 0;
+}
+
+int board_ehci_power(int port, int on)
+{
+ switch (port) {
+ case 0:
+ /* control OTG power */
+ /* No special PE for USBC, always on when ID pin signals
+ host mode */
+ break;
+ case 1:
+ /* Control MXM USBH */
+ /* Set MXM USBH power enable, '0' means on */
+ gpio_direction_output(GPIO_USBH_EN, !on);
+ mdelay(100);
+ break;
+ default:
+ break;
+ }
+ return 0;
+}
+#endif
+
+#ifdef CONFIG_FSL_ESDHC
+/* use the following sequence: eMMC, MMC */
+struct fsl_esdhc_cfg usdhc_cfg[CONFIG_SYS_FSL_USDHC_NUM] = {
+ {USDHC3_BASE_ADDR},
+ {USDHC1_BASE_ADDR},
+};
+
+int board_mmc_getcd(struct mmc *mmc)
+{
+ struct fsl_esdhc_cfg *cfg = (struct fsl_esdhc_cfg *)mmc->priv;
+ int ret = true; /* default: assume inserted */
+
+ switch (cfg->esdhc_base) {
+ case USDHC1_BASE_ADDR:
+ gpio_direction_input(GPIO_MMC_CD);
+ ret = !gpio_get_value(GPIO_MMC_CD);
+ break;
+ }
+
+ return ret;
+}
+
+int board_mmc_init(bd_t *bis)
+{
+#ifndef CONFIG_SPL_BUILD
+ s32 status = 0;
+ u32 index = 0;
+
+ usdhc_cfg[0].sdhc_clk = mxc_get_clock(MXC_ESDHC3_CLK);
+ usdhc_cfg[1].sdhc_clk = mxc_get_clock(MXC_ESDHC_CLK);
+
+ usdhc_cfg[0].max_bus_width = 8;
+ usdhc_cfg[1].max_bus_width = 4;
+
+ for (index = 0; index < CONFIG_SYS_FSL_USDHC_NUM; ++index) {
+ switch (index) {
+ case 0:
+ imx_iomux_v3_setup_multiple_pads(
+ usdhc3_pads, ARRAY_SIZE(usdhc3_pads));
+ break;
+ case 1:
+ imx_iomux_v3_setup_multiple_pads(
+ usdhc1_pads, ARRAY_SIZE(usdhc1_pads));
+ break;
+ default:
+ printf("Warning: you configured more USDHC controllers (%d) then supported by the board (%d)\n",
+ index + 1, CONFIG_SYS_FSL_USDHC_NUM);
+ return status;
+ }
+
+ status |= fsl_esdhc_initialize(bis, &usdhc_cfg[index]);
+ }
+
+ return status;
+#else
+ struct src *psrc = (struct src *)SRC_BASE_ADDR;
+ unsigned reg = readl(&psrc->sbmr1) >> 11;
+ /*
+ * Upon reading BOOT_CFG register the following map is done:
+ * Bit 11 and 12 of BOOT_CFG register can determine the current
+ * mmc port
+ * 0x1 SD1
+ * 0x2 SD2
+ * 0x3 SD4
+ */
+
+ switch (reg & 0x3) {
+ case 0x0:
+ imx_iomux_v3_setup_multiple_pads(
+ usdhc1_pads, ARRAY_SIZE(usdhc1_pads));
+ usdhc_cfg[0].esdhc_base = USDHC1_BASE_ADDR;
+ usdhc_cfg[0].sdhc_clk = mxc_get_clock(MXC_ESDHC_CLK);
+ gd->arch.sdhc_clk = usdhc_cfg[0].sdhc_clk;
+ break;
+ case 0x2:
+ imx_iomux_v3_setup_multiple_pads(
+ usdhc3_pads, ARRAY_SIZE(usdhc3_pads));
+ usdhc_cfg[0].esdhc_base = USDHC3_BASE_ADDR;
+ usdhc_cfg[0].sdhc_clk = mxc_get_clock(MXC_ESDHC3_CLK);
+ gd->arch.sdhc_clk = usdhc_cfg[0].sdhc_clk;
+ break;
+ default:
+ puts("MMC boot device not available");
+ }
+
+ return fsl_esdhc_initialize(bis, &usdhc_cfg[0]);
+#endif
+}
+#endif
+
+int board_phy_config(struct phy_device *phydev)
+{
+ if (phydev->drv->config)
+ phydev->drv->config(phydev);
+
+ return 0;
+}
+
+int board_eth_init(bd_t *bis)
+{
+ struct iomuxc *iomuxc_regs = (struct iomuxc *)IOMUXC_BASE_ADDR;
+ uint32_t base = IMX_FEC_BASE;
+ struct mii_dev *bus = NULL;
+ struct phy_device *phydev = NULL;
+ int ret;
+
+ /* provide the PHY clock from the i.MX 6 */
+ ret = enable_fec_anatop_clock(0, ENET_50MHZ);
+ if (ret)
+ return ret;
+ /* set gpr1[ENET_CLK_SEL] */
+ setbits_le32(&iomuxc_regs->gpr[1], IOMUXC_GPR1_ENET_CLK_SEL_MASK);
+
+ setup_iomux_enet();
+
+#ifdef CONFIG_FEC_MXC
+ bus = fec_get_miibus(base, -1);
+ if (!bus)
+ return 0;
+ /* scan PHY 1..7 */
+ phydev = phy_find_by_mask(bus, 0xff, PHY_INTERFACE_MODE_RMII);
+ if (!phydev) {
+ free(bus);
+ puts("no PHY found\n");
+ return 0;
+ }
+ phy_reset(phydev);
+ printf("using PHY at %d\n", phydev->addr);
+ ret = fec_probe(bis, -1, base, bus, phydev);
+ if (ret) {
+ printf("FEC MXC: %s:failed\n", __func__);
+ free(phydev);
+ free(bus);
+ }
+#endif
+ return 0;
+}
+
+static iomux_v3_cfg_t const pwr_intb_pads[] = {
+ /*
+ * the bootrom sets the iomux to vselect, potentially connecting
+ * two outputs. Set this back to GPIO
+ */
+ MX6_PAD_GPIO_18__GPIO7_IO13 | MUX_PAD_CTRL(NO_PAD_CTRL)
+};
+
+#if defined(CONFIG_VIDEO_IPUV3)
+
+static iomux_v3_cfg_t const backlight_pads[] = {
+ /* Backlight On */
+ MX6_PAD_EIM_D26__GPIO3_IO26 | MUX_PAD_CTRL(NO_PAD_CTRL),
+#define RGB_BACKLIGHT_GP IMX_GPIO_NR(3, 26)
+ /* Backlight PWM, used as GPIO in U-Boot */
+ MX6_PAD_EIM_A22__GPIO2_IO16 | MUX_PAD_CTRL(NO_PULLUP),
+ MX6_PAD_SD4_DAT1__GPIO2_IO09 | MUX_PAD_CTRL(NO_PAD_CTRL),
+#define RGB_BACKLIGHTPWM_GP IMX_GPIO_NR(2, 9)
+};
+
+static iomux_v3_cfg_t const rgb_pads[] = {
+ MX6_PAD_DI0_DISP_CLK__IPU1_DI0_DISP_CLK | MUX_PAD_CTRL(OUTPUT_RGB),
+ MX6_PAD_DI0_PIN15__IPU1_DI0_PIN15 | MUX_PAD_CTRL(OUTPUT_RGB),
+ MX6_PAD_DI0_PIN2__IPU1_DI0_PIN02 | MUX_PAD_CTRL(OUTPUT_RGB),
+ MX6_PAD_DI0_PIN3__IPU1_DI0_PIN03 | MUX_PAD_CTRL(OUTPUT_RGB),
+ MX6_PAD_DISP0_DAT0__IPU1_DISP0_DATA00 | MUX_PAD_CTRL(OUTPUT_RGB),
+ MX6_PAD_DISP0_DAT1__IPU1_DISP0_DATA01 | MUX_PAD_CTRL(OUTPUT_RGB),
+ MX6_PAD_DISP0_DAT2__IPU1_DISP0_DATA02 | MUX_PAD_CTRL(OUTPUT_RGB),
+ MX6_PAD_DISP0_DAT3__IPU1_DISP0_DATA03 | MUX_PAD_CTRL(OUTPUT_RGB),
+ MX6_PAD_DISP0_DAT4__IPU1_DISP0_DATA04 | MUX_PAD_CTRL(OUTPUT_RGB),
+ MX6_PAD_DISP0_DAT5__IPU1_DISP0_DATA05 | MUX_PAD_CTRL(OUTPUT_RGB),
+ MX6_PAD_DISP0_DAT6__IPU1_DISP0_DATA06 | MUX_PAD_CTRL(OUTPUT_RGB),
+ MX6_PAD_DISP0_DAT7__IPU1_DISP0_DATA07 | MUX_PAD_CTRL(OUTPUT_RGB),
+ MX6_PAD_DISP0_DAT8__IPU1_DISP0_DATA08 | MUX_PAD_CTRL(OUTPUT_RGB),
+ MX6_PAD_DISP0_DAT9__IPU1_DISP0_DATA09 | MUX_PAD_CTRL(OUTPUT_RGB),
+ MX6_PAD_DISP0_DAT10__IPU1_DISP0_DATA10 | MUX_PAD_CTRL(OUTPUT_RGB),
+ MX6_PAD_DISP0_DAT11__IPU1_DISP0_DATA11 | MUX_PAD_CTRL(OUTPUT_RGB),
+ MX6_PAD_DISP0_DAT12__IPU1_DISP0_DATA12 | MUX_PAD_CTRL(OUTPUT_RGB),
+ MX6_PAD_DISP0_DAT13__IPU1_DISP0_DATA13 | MUX_PAD_CTRL(OUTPUT_RGB),
+ MX6_PAD_DISP0_DAT14__IPU1_DISP0_DATA14 | MUX_PAD_CTRL(OUTPUT_RGB),
+ MX6_PAD_DISP0_DAT15__IPU1_DISP0_DATA15 | MUX_PAD_CTRL(OUTPUT_RGB),
+ MX6_PAD_DISP0_DAT16__IPU1_DISP0_DATA16 | MUX_PAD_CTRL(OUTPUT_RGB),
+ MX6_PAD_DISP0_DAT17__IPU1_DISP0_DATA17 | MUX_PAD_CTRL(OUTPUT_RGB),
+};
+
+static void do_enable_hdmi(struct display_info_t const *dev)
+{
+ imx_enable_hdmi_phy();
+}
+
+static void enable_rgb(struct display_info_t const *dev)
+{
+ imx_iomux_v3_setup_multiple_pads(
+ rgb_pads,
+ ARRAY_SIZE(rgb_pads));
+ gpio_direction_output(RGB_BACKLIGHT_GP, 1);
+ gpio_direction_output(RGB_BACKLIGHTPWM_GP, 0);
+}
+
+static int detect_default(struct display_info_t const *dev)
+{
+ (void) dev;
+ return 1;
+}
+
+struct display_info_t const displays[] = {{
+ .bus = -1,
+ .addr = 0,
+ .pixfmt = IPU_PIX_FMT_RGB24,
+ .detect = detect_hdmi,
+ .enable = do_enable_hdmi,
+ .mode = {
+ .name = "HDMI",
+ .refresh = 60,
+ .xres = 1024,
+ .yres = 768,
+ .pixclock = 15385,
+ .left_margin = 220,
+ .right_margin = 40,
+ .upper_margin = 21,
+ .lower_margin = 7,
+ .hsync_len = 60,
+ .vsync_len = 10,
+ .sync = FB_SYNC_EXT,
+ .vmode = FB_VMODE_NONINTERLACED
+} }, {
+ .bus = -1,
+ .addr = 0,
+ .pixfmt = IPU_PIX_FMT_RGB666,
+ .detect = detect_default,
+ .enable = enable_rgb,
+ .mode = {
+ .name = "vga-rgb",
+ .refresh = 60,
+ .xres = 640,
+ .yres = 480,
+ .pixclock = 33000,
+ .left_margin = 48,
+ .right_margin = 16,
+ .upper_margin = 31,
+ .lower_margin = 11,
+ .hsync_len = 96,
+ .vsync_len = 2,
+ .sync = 0,
+ .vmode = FB_VMODE_NONINTERLACED
+} }, {
+ .bus = -1,
+ .addr = 0,
+ .pixfmt = IPU_PIX_FMT_RGB666,
+ .enable = enable_rgb,
+ .mode = {
+ .name = "wvga-rgb",
+ .refresh = 60,
+ .xres = 800,
+ .yres = 480,
+ .pixclock = 25000,
+ .left_margin = 40,
+ .right_margin = 88,
+ .upper_margin = 33,
+ .lower_margin = 10,
+ .hsync_len = 128,
+ .vsync_len = 2,
+ .sync = 0,
+ .vmode = FB_VMODE_NONINTERLACED
+} } };
+size_t display_count = ARRAY_SIZE(displays);
+
+static void setup_display(void)
+{
+ struct mxc_ccm_reg *mxc_ccm = (struct mxc_ccm_reg *)CCM_BASE_ADDR;
+ struct iomuxc *iomux = (struct iomuxc *)IOMUXC_BASE_ADDR;
+ int reg;
+
+ enable_ipu_clock();
+ imx_setup_hdmi();
+ /* Turn on LDB0,IPU,IPU DI0 clocks */
+ reg = __raw_readl(&mxc_ccm->CCGR3);
+ reg |= MXC_CCM_CCGR3_LDB_DI0_MASK;
+ writel(reg, &mxc_ccm->CCGR3);
+
+ /* set LDB0, LDB1 clk select to 011/011 */
+ reg = readl(&mxc_ccm->cs2cdr);
+ reg &= ~(MXC_CCM_CS2CDR_LDB_DI0_CLK_SEL_MASK
+ |MXC_CCM_CS2CDR_LDB_DI1_CLK_SEL_MASK);
+ reg |= (3<<MXC_CCM_CS2CDR_LDB_DI0_CLK_SEL_OFFSET)
+ |(3<<MXC_CCM_CS2CDR_LDB_DI1_CLK_SEL_OFFSET);
+ writel(reg, &mxc_ccm->cs2cdr);
+
+ reg = readl(&mxc_ccm->cscmr2);
+ reg |= MXC_CCM_CSCMR2_LDB_DI0_IPU_DIV;
+ writel(reg, &mxc_ccm->cscmr2);
+
+ reg = readl(&mxc_ccm->chsccdr);
+ reg |= (CHSCCDR_CLK_SEL_LDB_DI0
+ <<MXC_CCM_CHSCCDR_IPU1_DI0_CLK_SEL_OFFSET);
+ writel(reg, &mxc_ccm->chsccdr);
+
+ reg = IOMUXC_GPR2_BGREF_RRMODE_EXTERNAL_RES
+ |IOMUXC_GPR2_DI1_VS_POLARITY_ACTIVE_HIGH
+ |IOMUXC_GPR2_DI0_VS_POLARITY_ACTIVE_LOW
+ |IOMUXC_GPR2_BIT_MAPPING_CH1_SPWG
+ |IOMUXC_GPR2_DATA_WIDTH_CH1_18BIT
+ |IOMUXC_GPR2_BIT_MAPPING_CH0_SPWG
+ |IOMUXC_GPR2_DATA_WIDTH_CH0_18BIT
+ |IOMUXC_GPR2_LVDS_CH1_MODE_DISABLED
+ |IOMUXC_GPR2_LVDS_CH0_MODE_ENABLED_DI0;
+ writel(reg, &iomux->gpr[2]);
+
+ reg = readl(&iomux->gpr[3]);
+ reg = (reg & ~(IOMUXC_GPR3_LVDS0_MUX_CTL_MASK
+ |IOMUXC_GPR3_HDMI_MUX_CTL_MASK))
+ | (IOMUXC_GPR3_MUX_SRC_IPU1_DI0
+ <<IOMUXC_GPR3_LVDS0_MUX_CTL_OFFSET);
+ writel(reg, &iomux->gpr[3]);
+
+ /* backlight unconditionally on for now */
+ imx_iomux_v3_setup_multiple_pads(backlight_pads,
+ ARRAY_SIZE(backlight_pads));
+ /* use 0 for EDT 7", use 1 for LG fullHD panel */
+ gpio_direction_output(RGB_BACKLIGHTPWM_GP, 0);
+ gpio_direction_output(RGB_BACKLIGHT_GP, 1);
+}
+#endif /* defined(CONFIG_VIDEO_IPUV3) */
+
+int board_early_init_f(void)
+{
+ imx_iomux_v3_setup_multiple_pads(pwr_intb_pads,
+ ARRAY_SIZE(pwr_intb_pads));
+ setup_iomux_uart();
+
+#if defined(CONFIG_VIDEO_IPUV3)
+ setup_display();
+#endif
+ return 0;
+}
+
+/*
+ * Do not overwrite the console
+ * Use always serial for U-Boot console
+ */
+int overwrite_console(void)
+{
+ return 1;
+}
+
+int board_init(void)
+{
+ /* address of boot parameters */
+ gd->bd->bi_boot_params = PHYS_SDRAM + 0x100;
+
+ setup_i2c(2, CONFIG_SYS_I2C_SPEED, 0x7f, &i2c_pad_info1);
+ setup_i2c(1, CONFIG_SYS_I2C_SPEED, 0x7f, &i2c_pad_info_loc);
+
+#ifdef CONFIG_TDX_CMD_IMX_MFGR
+ (void) pmic_init();
+#endif
+
+#ifdef CONFIG_CMD_SATA
+ setup_sata();
+#endif
+
+ setup_iomux_gpio();
+
+ return 0;
+}
+
+#ifdef CONFIG_BOARD_LATE_INIT
+int board_late_init(void)
+{
+#if defined(CONFIG_REVISION_TAG) && \
+ defined(CONFIG_ENV_VARS_UBOOT_RUNTIME_CONFIG)
+ char env_str[256];
+ u32 rev;
+
+ rev = get_board_rev();
+ snprintf(env_str, ARRAY_SIZE(env_str), "%.4x", rev);
+ setenv("board_rev", env_str);
+#endif
+
+ return 0;
+}
+#endif /* CONFIG_BOARD_LATE_INIT */
+
+#if defined(CONFIG_OF_LIBFDT) && defined(CONFIG_OF_SYSTEM_SETUP)
+int ft_system_setup(void *blob, bd_t *bd)
+{
+ return 0;
+}
+#endif
+
+int checkboard(void)
+{
+ char it[] = " IT";
+ int minc, maxc;
+
+ switch (get_cpu_temp_grade(&minc, &maxc)) {
+ case TEMP_AUTOMOTIVE:
+ case TEMP_INDUSTRIAL:
+ break;
+ case TEMP_EXTCOMMERCIAL:
+ default:
+ it[0] = 0;
+ };
+ printf("Model: Toradex Colibri iMX6 %s %sMB%s\n",
+ is_cpu_type(MXC_CPU_MX6DL) ? "DualLite" : "Solo",
+ (gd->ram_size == 0x20000000) ? "512" : "256", it);
+ return 0;
+}
+
+#if defined(CONFIG_OF_LIBFDT) && defined(CONFIG_OF_BOARD_SETUP)
+int ft_board_setup(void *blob, bd_t *bd)
+{
+ return ft_common_board_setup(blob, bd);
+}
+#endif
+
+#ifdef CONFIG_CMD_BMODE
+static const struct boot_mode board_boot_modes[] = {
+ {"mmc", MAKE_CFGVAL(0x40, 0x20, 0x00, 0x00)},
+ {NULL, 0},
+};
+#endif
+
+int misc_init_r(void)
+{
+#ifdef CONFIG_CMD_BMODE
+ add_board_boot_modes(board_boot_modes);
+#endif
+ return 0;
+}
+
+#ifdef CONFIG_LDO_BYPASS_CHECK
+/* TODO, use external pmic, for now always ldo_enable */
+void ldo_mode_set(int ldo_bypass)
+{
+ return;
+}
+#endif
+
+#ifdef CONFIG_SPL_BUILD
+#include <spl.h>
+#include <libfdt.h>
+#include "asm/arch/mx6dl-ddr.h"
+#include "asm/arch/iomux.h"
+#include "asm/arch/crm_regs.h"
+
+static int mx6s_dcd_table[] = {
+/* ddr-setup.cfg */
+
+MX6_IOM_DRAM_SDQS0, 0x00000030,
+MX6_IOM_DRAM_SDQS1, 0x00000030,
+MX6_IOM_DRAM_SDQS2, 0x00000030,
+MX6_IOM_DRAM_SDQS3, 0x00000030,
+MX6_IOM_DRAM_SDQS4, 0x00000030,
+MX6_IOM_DRAM_SDQS5, 0x00000030,
+MX6_IOM_DRAM_SDQS6, 0x00000030,
+MX6_IOM_DRAM_SDQS7, 0x00000030,
+
+MX6_IOM_GRP_B0DS, 0x00000030,
+MX6_IOM_GRP_B1DS, 0x00000030,
+MX6_IOM_GRP_B2DS, 0x00000030,
+MX6_IOM_GRP_B3DS, 0x00000030,
+MX6_IOM_GRP_B4DS, 0x00000030,
+MX6_IOM_GRP_B5DS, 0x00000030,
+MX6_IOM_GRP_B6DS, 0x00000030,
+MX6_IOM_GRP_B7DS, 0x00000030,
+MX6_IOM_GRP_ADDDS, 0x00000030,
+/* 40 Ohm drive strength for cs0/1,sdba2,cke0/1,sdwe */
+MX6_IOM_GRP_CTLDS, 0x00000030,
+
+MX6_IOM_DRAM_DQM0, 0x00020030,
+MX6_IOM_DRAM_DQM1, 0x00020030,
+MX6_IOM_DRAM_DQM2, 0x00020030,
+MX6_IOM_DRAM_DQM3, 0x00020030,
+MX6_IOM_DRAM_DQM4, 0x00020030,
+MX6_IOM_DRAM_DQM5, 0x00020030,
+MX6_IOM_DRAM_DQM6, 0x00020030,
+MX6_IOM_DRAM_DQM7, 0x00020030,
+
+MX6_IOM_DRAM_CAS, 0x00020030,
+MX6_IOM_DRAM_RAS, 0x00020030,
+MX6_IOM_DRAM_SDCLK_0, 0x00020030,
+MX6_IOM_DRAM_SDCLK_1, 0x00020030,
+
+MX6_IOM_DRAM_RESET, 0x00020030,
+MX6_IOM_DRAM_SDCKE0, 0x00003000,
+MX6_IOM_DRAM_SDCKE1, 0x00003000,
+
+MX6_IOM_DRAM_SDODT0, 0x00003030,
+MX6_IOM_DRAM_SDODT1, 0x00003030,
+
+/* (differential input) */
+MX6_IOM_DDRMODE_CTL, 0x00020000,
+/* (differential input) */
+MX6_IOM_GRP_DDRMODE, 0x00020000,
+/* disable ddr pullups */
+MX6_IOM_GRP_DDRPKE, 0x00000000,
+MX6_IOM_DRAM_SDBA2, 0x00000000,
+/* 40 Ohm drive strength for cs0/1,sdba2,cke0/1,sdwe */
+MX6_IOM_GRP_DDR_TYPE, 0x000C0000,
+
+/* Read data DQ Byte0-3 delay */
+MX6_MMDC_P0_MPRDDQBY0DL, 0x33333333,
+MX6_MMDC_P0_MPRDDQBY1DL, 0x33333333,
+MX6_MMDC_P0_MPRDDQBY2DL, 0x33333333,
+MX6_MMDC_P0_MPRDDQBY3DL, 0x33333333,
+MX6_MMDC_P1_MPRDDQBY0DL, 0x33333333,
+MX6_MMDC_P1_MPRDDQBY1DL, 0x33333333,
+MX6_MMDC_P1_MPRDDQBY2DL, 0x33333333,
+MX6_MMDC_P1_MPRDDQBY3DL, 0x33333333,
+
+/*
+ * MDMISC mirroring interleaved (row/bank/col)
+ */
+/* TODO: check what the RALAT field does */
+MX6_MMDC_P0_MDMISC, 0x00081740,
+
+/*
+ * MDSCR con_req
+ */
+MX6_MMDC_P0_MDSCR, 0x00008000,
+
+
+/* 800mhz_2x64mx16.cfg */
+
+MX6_MMDC_P0_MDPDC, 0x0002002D,
+MX6_MMDC_P0_MDCFG0, 0x2C305503,
+MX6_MMDC_P0_MDCFG1, 0xB66D8D63,
+MX6_MMDC_P0_MDCFG2, 0x01FF00DB,
+MX6_MMDC_P0_MDRWD, 0x000026D2,
+MX6_MMDC_P0_MDOR, 0x00301023,
+MX6_MMDC_P0_MDOTC, 0x00333030,
+MX6_MMDC_P0_MDPDC, 0x0002556D,
+/* CS0 End: 7MSB of ((0x10000000, + 512M) -1) >> 25 */
+MX6_MMDC_P0_MDASP, 0x00000017,
+/* DDR3 DATA BUS SIZE: 64BIT */
+/* MX6_MMDC_P0_MDCTL, 0x821A0000, */
+/* DDR3 DATA BUS SIZE: 32BIT */
+MX6_MMDC_P0_MDCTL, 0x82190000,
+
+/* Write commands to DDR */
+/* Load Mode Registers */
+/* TODO Use Auto Self-Refresh mode (Extended Temperature)*/
+/* MX6_MMDC_P0_MDSCR, 0x04408032, */
+MX6_MMDC_P0_MDSCR, 0x04008032,
+MX6_MMDC_P0_MDSCR, 0x00008033,
+MX6_MMDC_P0_MDSCR, 0x00048031,
+MX6_MMDC_P0_MDSCR, 0x13208030,
+/* ZQ calibration */
+MX6_MMDC_P0_MDSCR, 0x04008040,
+
+MX6_MMDC_P0_MPZQHWCTRL, 0xA1390003,
+MX6_MMDC_P1_MPZQHWCTRL, 0xA1390003,
+MX6_MMDC_P0_MDREF, 0x00005800,
+
+MX6_MMDC_P0_MPODTCTRL, 0x00000000,
+MX6_MMDC_P1_MPODTCTRL, 0x00000000,
+
+MX6_MMDC_P0_MPDGCTRL0, 0x42360232,
+MX6_MMDC_P0_MPDGCTRL1, 0x021F022A,
+MX6_MMDC_P1_MPDGCTRL0, 0x421E0224,
+MX6_MMDC_P1_MPDGCTRL1, 0x02110218,
+
+MX6_MMDC_P0_MPRDDLCTL, 0x41434344,
+MX6_MMDC_P1_MPRDDLCTL, 0x4345423E,
+MX6_MMDC_P0_MPWRDLCTL, 0x39383339,
+MX6_MMDC_P1_MPWRDLCTL, 0x3E363930,
+
+MX6_MMDC_P0_MPWLDECTRL0, 0x00340039,
+MX6_MMDC_P0_MPWLDECTRL1, 0x002C002D,
+MX6_MMDC_P1_MPWLDECTRL0, 0x00120019,
+MX6_MMDC_P1_MPWLDECTRL1, 0x0012002D,
+
+MX6_MMDC_P0_MPMUR0, 0x00000800,
+MX6_MMDC_P1_MPMUR0, 0x00000800,
+MX6_MMDC_P0_MDSCR, 0x00000000,
+MX6_MMDC_P0_MAPSR, 0x00011006,
+};
+
+static int mx6dl_dcd_table[] = {
+/* ddr-setup.cfg */
+
+MX6_IOM_DRAM_SDQS0, 0x00000030,
+MX6_IOM_DRAM_SDQS1, 0x00000030,
+MX6_IOM_DRAM_SDQS2, 0x00000030,
+MX6_IOM_DRAM_SDQS3, 0x00000030,
+MX6_IOM_DRAM_SDQS4, 0x00000030,
+MX6_IOM_DRAM_SDQS5, 0x00000030,
+MX6_IOM_DRAM_SDQS6, 0x00000030,
+MX6_IOM_DRAM_SDQS7, 0x00000030,
+
+MX6_IOM_GRP_B0DS, 0x00000030,
+MX6_IOM_GRP_B1DS, 0x00000030,
+MX6_IOM_GRP_B2DS, 0x00000030,
+MX6_IOM_GRP_B3DS, 0x00000030,
+MX6_IOM_GRP_B4DS, 0x00000030,
+MX6_IOM_GRP_B5DS, 0x00000030,
+MX6_IOM_GRP_B6DS, 0x00000030,
+MX6_IOM_GRP_B7DS, 0x00000030,
+MX6_IOM_GRP_ADDDS, 0x00000030,
+/* 40 Ohm drive strength for cs0/1,sdba2,cke0/1,sdwe */
+MX6_IOM_GRP_CTLDS, 0x00000030,
+
+MX6_IOM_DRAM_DQM0, 0x00020030,
+MX6_IOM_DRAM_DQM1, 0x00020030,
+MX6_IOM_DRAM_DQM2, 0x00020030,
+MX6_IOM_DRAM_DQM3, 0x00020030,
+MX6_IOM_DRAM_DQM4, 0x00020030,
+MX6_IOM_DRAM_DQM5, 0x00020030,
+MX6_IOM_DRAM_DQM6, 0x00020030,
+MX6_IOM_DRAM_DQM7, 0x00020030,
+
+MX6_IOM_DRAM_CAS, 0x00020030,
+MX6_IOM_DRAM_RAS, 0x00020030,
+MX6_IOM_DRAM_SDCLK_0, 0x00020030,
+MX6_IOM_DRAM_SDCLK_1, 0x00020030,
+
+MX6_IOM_DRAM_RESET, 0x00020030,
+MX6_IOM_DRAM_SDCKE0, 0x00003000,
+MX6_IOM_DRAM_SDCKE1, 0x00003000,
+
+MX6_IOM_DRAM_SDODT0, 0x00003030,
+MX6_IOM_DRAM_SDODT1, 0x00003030,
+
+/* (differential input) */
+MX6_IOM_DDRMODE_CTL, 0x00020000,
+/* (differential input) */
+MX6_IOM_GRP_DDRMODE, 0x00020000,
+/* disable ddr pullups */
+MX6_IOM_GRP_DDRPKE, 0x00000000,
+MX6_IOM_DRAM_SDBA2, 0x00000000,
+/* 40 Ohm drive strength for cs0/1,sdba2,cke0/1,sdwe */
+MX6_IOM_GRP_DDR_TYPE, 0x000C0000,
+
+/* Read data DQ Byte0-3 delay */
+MX6_MMDC_P0_MPRDDQBY0DL, 0x33333333,
+MX6_MMDC_P0_MPRDDQBY1DL, 0x33333333,
+MX6_MMDC_P0_MPRDDQBY2DL, 0x33333333,
+MX6_MMDC_P0_MPRDDQBY3DL, 0x33333333,
+MX6_MMDC_P1_MPRDDQBY0DL, 0x33333333,
+MX6_MMDC_P1_MPRDDQBY1DL, 0x33333333,
+MX6_MMDC_P1_MPRDDQBY2DL, 0x33333333,
+MX6_MMDC_P1_MPRDDQBY3DL, 0x33333333,
+
+/*
+ * MDMISC mirroring interleaved (row/bank/col)
+ */
+/* TODO: check what the RALAT field does */
+MX6_MMDC_P0_MDMISC, 0x00081740,
+
+/*
+ * MDSCR con_req
+ */
+MX6_MMDC_P0_MDSCR, 0x00008000,
+
+
+/* 800mhz_2x64mx16.cfg */
+
+MX6_MMDC_P0_MDPDC, 0x0002002D,
+MX6_MMDC_P0_MDCFG0, 0x2C305503,
+MX6_MMDC_P0_MDCFG1, 0xB66D8D63,
+MX6_MMDC_P0_MDCFG2, 0x01FF00DB,
+MX6_MMDC_P0_MDRWD, 0x000026D2,
+MX6_MMDC_P0_MDOR, 0x00301023,
+MX6_MMDC_P0_MDOTC, 0x00333030,
+MX6_MMDC_P0_MDPDC, 0x0002556D,
+/* CS0 End: 7MSB of ((0x10000000, + 512M) -1) >> 25 */
+MX6_MMDC_P0_MDASP, 0x00000017,
+/* DDR3 DATA BUS SIZE: 64BIT */
+MX6_MMDC_P0_MDCTL, 0x821A0000,
+/* DDR3 DATA BUS SIZE: 32BIT */
+/* MX6_MMDC_P0_MDCTL, 0x82190000, */
+
+/* Write commands to DDR */
+/* Load Mode Registers */
+/* TODO Use Auto Self-Refresh mode (Extended Temperature)*/
+/* MX6_MMDC_P0_MDSCR, 0x04408032, */
+MX6_MMDC_P0_MDSCR, 0x04008032,
+MX6_MMDC_P0_MDSCR, 0x00008033,
+MX6_MMDC_P0_MDSCR, 0x00048031,
+MX6_MMDC_P0_MDSCR, 0x13208030,
+/* ZQ calibration */
+MX6_MMDC_P0_MDSCR, 0x04008040,
+
+MX6_MMDC_P0_MPZQHWCTRL, 0xA1390003,
+MX6_MMDC_P1_MPZQHWCTRL, 0xA1390003,
+MX6_MMDC_P0_MDREF, 0x00005800,
+
+MX6_MMDC_P0_MPODTCTRL, 0x00000000,
+MX6_MMDC_P1_MPODTCTRL, 0x00000000,
+
+MX6_MMDC_P0_MPDGCTRL0, 0x42360232,
+MX6_MMDC_P0_MPDGCTRL1, 0x021F022A,
+MX6_MMDC_P1_MPDGCTRL0, 0x421E0224,
+MX6_MMDC_P1_MPDGCTRL1, 0x02110218,
+
+MX6_MMDC_P0_MPRDDLCTL, 0x41434344,
+MX6_MMDC_P1_MPRDDLCTL, 0x4345423E,
+MX6_MMDC_P0_MPWRDLCTL, 0x39383339,
+MX6_MMDC_P1_MPWRDLCTL, 0x3E363930,
+
+MX6_MMDC_P0_MPWLDECTRL0, 0x00340039,
+MX6_MMDC_P0_MPWLDECTRL1, 0x002C002D,
+MX6_MMDC_P1_MPWLDECTRL0, 0x00120019,
+MX6_MMDC_P1_MPWLDECTRL1, 0x0012002D,
+
+MX6_MMDC_P0_MPMUR0, 0x00000800,
+MX6_MMDC_P1_MPMUR0, 0x00000800,
+MX6_MMDC_P0_MDSCR, 0x00000000,
+MX6_MMDC_P0_MAPSR, 0x00011006,
+};
+
+static void ccgr_init(void)
+{
+ struct mxc_ccm_reg *ccm = (struct mxc_ccm_reg *)CCM_BASE_ADDR;
+
+ writel(0x00C03F3F, &ccm->CCGR0);
+ writel(0x0030FC03, &ccm->CCGR1);
+ writel(0x0FFFFFF3, &ccm->CCGR2);
+ writel(0x3FF0300F, &ccm->CCGR3);
+ writel(0x00FFF300, &ccm->CCGR4);
+ writel(0x0F0000F3, &ccm->CCGR5);
+ writel(0x000003FF, &ccm->CCGR6);
+
+/*
+ * Setup CCM_CCOSR register as follows:
+ *
+ * cko1_en = 1 --> CKO1 enabled
+ * cko1_div = 111 --> divide by 8
+ * cko1_sel = 1011 --> ahb_clk_root
+ *
+ * This sets CKO1 at ahb_clk_root/8 = 132/8 = 16.5 MHz
+ */
+ writel(0x000000FB, &ccm->ccosr);
+}
+
+static void gpr_init(void)
+{
+ struct iomuxc *iomux = (struct iomuxc *)IOMUXC_BASE_ADDR;
+
+ /* enable AXI cache for VDOA/VPU/IPU */
+ writel(0xF00000CF, &iomux->gpr[4]);
+ /* set IPU AXI-id0 Qos=0xf(bypass) AXI-id1 Qos=0x7 */
+ writel(0x007F007F, &iomux->gpr[6]);
+ writel(0x007F007F, &iomux->gpr[7]);
+}
+
+static void ddr_init(int *table, int size)
+{
+ int i;
+
+ for (i = 0; i < size / 2 ; i++)
+ writel(table[2 * i + 1], table[2 * i]);
+}
+
+static void spl_dram_init(void)
+{
+ int minc, maxc;
+
+ switch (get_cpu_temp_grade(&minc, &maxc)) {
+ case TEMP_COMMERCIAL:
+ case TEMP_EXTCOMMERCIAL:
+ if (is_cpu_type(MXC_CPU_MX6DL)) {
+ puts("Commercial temperature grade DDR3 timings, 64bit bus width.\n");
+ ddr_init(mx6dl_dcd_table, ARRAY_SIZE(mx6dl_dcd_table));
+ } else {
+ puts("Commercial temperature grade DDR3 timings, 32bit bus width.\n");
+ ddr_init(mx6s_dcd_table, ARRAY_SIZE(mx6s_dcd_table));
+ }
+ break;
+ case TEMP_INDUSTRIAL:
+ case TEMP_AUTOMOTIVE:
+ default:
+ if (is_cpu_type(MXC_CPU_MX6DL)) {
+ ddr_init(mx6dl_dcd_table, ARRAY_SIZE(mx6dl_dcd_table));
+ } else {
+ puts("Industrial temperature grade DDR3 timings, 32bit bus width.\n");
+ ddr_init(mx6s_dcd_table, ARRAY_SIZE(mx6s_dcd_table));
+ }
+ break;
+ };
+ udelay(100);
+}
+
+void board_init_f(ulong dummy)
+{
+ /* setup AIPS and disable watchdog */
+ arch_cpu_init();
+
+ ccgr_init();
+ gpr_init();
+
+ /* iomux and setup of i2c */
+ board_early_init_f();
+
+ /* setup GP timer */
+ timer_init();
+
+ /* UART clocks enabled and gd valid - init serial console */
+ preloader_console_init();
+
+ /* Make sure we use dte mode */
+ setup_dtemode_uart();
+
+ /* DDR initialization */
+ spl_dram_init();
+
+ /* Clear the BSS. */
+ memset(__bss_start, 0, __bss_end - __bss_start);
+
+ /* load/boot image from boot device */
+ board_init_r(NULL, 0);
+}
+
+void reset_cpu(ulong addr)
+{
+}
+
+#endif
+
+static struct mxc_serial_platdata mxc_serial_plat = {
+ .reg = (struct mxc_uart *)UART1_BASE,
+ .use_dte = true,
+};
+
+U_BOOT_DEVICE(mxc_serial) = {
+ .name = "serial_mxc",
+ .platdata = &mxc_serial_plat,
+};
diff --git a/board/toradex/colibri_imx6/colibri_imx6.cfg b/board/toradex/colibri_imx6/colibri_imx6.cfg
new file mode 100644
index 0000000..e7886de
--- /dev/null
+++ b/board/toradex/colibri_imx6/colibri_imx6.cfg
@@ -0,0 +1,38 @@
+/*
+ * Copyright (C) 2013 Boundary Devices
+ * Copyright (C) 2014 Toradex AG
+ *
+ * SPDX-License-Identifier: GPL-2.0+
+ *
+ * Refer doc/README.imximage for more details about how-to configure
+ * and create imximage boot image
+ *
+ * The syntax is taken as close as possible with the kwbimage
+ */
+
+/* image version */
+IMAGE_VERSION 2
+
+/*
+ * Boot Device : one of
+ * spi, sd (the board has no nand neither onenand)
+ */
+BOOT_FROM sd
+
+#define __ASSEMBLY__
+#include <config.h>
+#include "asm/arch/mx6-ddr.h"
+#include "asm/arch/iomux.h"
+#include "asm/arch/crm_regs.h"
+
+#include "ddr-setup.cfg"
+
+#if CONFIG_DDR_MB == 256
+#include "800mhz_2x64mx16.cfg"
+#elif CONFIG_DDR_MB == 512
+#include "800mhz_4x64mx16.cfg"
+#else
+#error "unknown DDR size"
+#endif
+
+#include "clocks.cfg"
diff --git a/board/toradex/colibri_imx6/ddr-setup.cfg b/board/toradex/colibri_imx6/ddr-setup.cfg
new file mode 100644
index 0000000..f46ae55
--- /dev/null
+++ b/board/toradex/colibri_imx6/ddr-setup.cfg
@@ -0,0 +1,98 @@
+/*
+ * Copyright (C) 2013 Boundary Devices
+ * Copyright (C) 2014-2016, Toradex AG
+ *
+ * SPDX-License-Identifier: GPL-2.0+
+ *
+ * Device Configuration Data (DCD)
+ *
+ * Each entry must have the format:
+ * Addr-type Address Value
+ *
+ * where:
+ * Addr-type register length (1,2 or 4 bytes)
+ * Address absolute address of the register
+ * value value to be stored in the register
+ */
+
+/*
+ * DDR3 settings
+ * MX6Q ddr is limited to 1066 Mhz currently 1056 MHz(528 MHz clock),
+ * memory bus width: 64 bits x16/x32/x64
+ * MX6DL ddr is limited to 800 MHz(400 MHz clock)
+ * memory bus width: 64 bits x16/x32/x64
+ * MX6SOLO ddr is limited to 800 MHz(400 MHz clock)
+ * memory bus width: 32 bits x16/x32
+ */
+DATA 4, MX6_IOM_DRAM_SDQS0, 0x00000030
+DATA 4, MX6_IOM_DRAM_SDQS1, 0x00000030
+DATA 4, MX6_IOM_DRAM_SDQS2, 0x00000030
+DATA 4, MX6_IOM_DRAM_SDQS3, 0x00000030
+DATA 4, MX6_IOM_DRAM_SDQS4, 0x00000030
+DATA 4, MX6_IOM_DRAM_SDQS5, 0x00000030
+DATA 4, MX6_IOM_DRAM_SDQS6, 0x00000030
+DATA 4, MX6_IOM_DRAM_SDQS7, 0x00000030
+
+DATA 4, MX6_IOM_GRP_B0DS, 0x00000030
+DATA 4, MX6_IOM_GRP_B1DS, 0x00000030
+DATA 4, MX6_IOM_GRP_B2DS, 0x00000030
+DATA 4, MX6_IOM_GRP_B3DS, 0x00000030
+DATA 4, MX6_IOM_GRP_B4DS, 0x00000030
+DATA 4, MX6_IOM_GRP_B5DS, 0x00000030
+DATA 4, MX6_IOM_GRP_B6DS, 0x00000030
+DATA 4, MX6_IOM_GRP_B7DS, 0x00000030
+DATA 4, MX6_IOM_GRP_ADDDS, 0x00000030
+/* 40 Ohm drive strength for cs0/1,sdba2,cke0/1,sdwe */
+DATA 4, MX6_IOM_GRP_CTLDS, 0x00000030
+
+DATA 4, MX6_IOM_DRAM_DQM0, 0x00020030
+DATA 4, MX6_IOM_DRAM_DQM1, 0x00020030
+DATA 4, MX6_IOM_DRAM_DQM2, 0x00020030
+DATA 4, MX6_IOM_DRAM_DQM3, 0x00020030
+DATA 4, MX6_IOM_DRAM_DQM4, 0x00020030
+DATA 4, MX6_IOM_DRAM_DQM5, 0x00020030
+DATA 4, MX6_IOM_DRAM_DQM6, 0x00020030
+DATA 4, MX6_IOM_DRAM_DQM7, 0x00020030
+
+DATA 4, MX6_IOM_DRAM_CAS, 0x00020030
+DATA 4, MX6_IOM_DRAM_RAS, 0x00020030
+DATA 4, MX6_IOM_DRAM_SDCLK_0, 0x00020030
+DATA 4, MX6_IOM_DRAM_SDCLK_1, 0x00020030
+
+DATA 4, MX6_IOM_DRAM_RESET, 0x00020030
+DATA 4, MX6_IOM_DRAM_SDCKE0, 0x00003000
+DATA 4, MX6_IOM_DRAM_SDCKE1, 0x00003000
+
+DATA 4, MX6_IOM_DRAM_SDODT0, 0x00003030
+DATA 4, MX6_IOM_DRAM_SDODT1, 0x00003030
+
+/* (differential input) */
+DATA 4, MX6_IOM_DDRMODE_CTL, 0x00020000
+/* (differential input) */
+DATA 4, MX6_IOM_GRP_DDRMODE, 0x00020000
+/* disable ddr pullups */
+DATA 4, MX6_IOM_GRP_DDRPKE, 0x00000000
+DATA 4, MX6_IOM_DRAM_SDBA2, 0x00000000
+/* 40 Ohm drive strength for cs0/1,sdba2,cke0/1,sdwe */
+DATA 4, MX6_IOM_GRP_DDR_TYPE, 0x000C0000
+
+/* Read data DQ Byte0-3 delay */
+DATA 4, MX6_MMDC_P0_MPRDDQBY0DL, 0x33333333
+DATA 4, MX6_MMDC_P0_MPRDDQBY1DL, 0x33333333
+DATA 4, MX6_MMDC_P0_MPRDDQBY2DL, 0x33333333
+DATA 4, MX6_MMDC_P0_MPRDDQBY3DL, 0x33333333
+DATA 4, MX6_MMDC_P1_MPRDDQBY0DL, 0x33333333
+DATA 4, MX6_MMDC_P1_MPRDDQBY1DL, 0x33333333
+DATA 4, MX6_MMDC_P1_MPRDDQBY2DL, 0x33333333
+DATA 4, MX6_MMDC_P1_MPRDDQBY3DL, 0x33333333
+
+/*
+ * MDMISC mirroring interleaved (row/bank/col)
+ */
+/* TODO: check what the RALAT field does */
+DATA 4, MX6_MMDC_P0_MDMISC, 0x00081740
+
+/*
+ * MDSCR con_req
+ */
+DATA 4, MX6_MMDC_P0_MDSCR, 0x00008000
diff --git a/board/toradex/colibri_imx6/do_fuse.c b/board/toradex/colibri_imx6/do_fuse.c
new file mode 100644
index 0000000..cff07e9
--- /dev/null
+++ b/board/toradex/colibri_imx6/do_fuse.c
@@ -0,0 +1,98 @@
+/*
+ * Copyright (C) 2014-2016, Toradex AG
+ *
+ * SPDX-License-Identifier: GPL-2.0+
+ */
+
+/*
+ * Helpers for i.MX OTP fusing during module production
+*/
+
+#include <common.h>
+#ifndef CONFIG_SPL_BUILD
+#include <console.h>
+#include <fuse.h>
+
+static int mfgr_fuse(void)
+{
+ unsigned val, val6;
+
+ fuse_sense(0, 5, &val);
+ printf("Fuse 0, 5: %8x\n", val);
+ fuse_sense(0, 6, &val6);
+ printf("Fuse 0, 6: %8x\n", val6);
+ fuse_sense(4, 3, &val);
+ printf("Fuse 4, 3: %8x\n", val);
+ fuse_sense(4, 2, &val);
+ printf("Fuse 4, 2: %8x\n", val);
+ if (val6 & 0x10) {
+ puts("BT_FUSE_SEL already fused, will do nothing\n");
+ return CMD_RET_FAILURE;
+ }
+ /* boot cfg */
+ fuse_prog(0, 5, 0x00005072);
+ /* BT_FUSE_SEL */
+ fuse_prog(0, 6, 0x00000010);
+ return CMD_RET_SUCCESS;
+}
+
+int do_mfgr_fuse(cmd_tbl_t *cmdtp, int flag, int argc,
+ char * const argv[])
+{
+ int ret;
+ puts("Fusing...\n");
+ ret = mfgr_fuse();
+ if (ret == CMD_RET_SUCCESS)
+ puts("done.\n");
+ else
+ puts("failed.\n");
+ return ret;
+}
+
+int do_updt_fuse(cmd_tbl_t *cmdtp, int flag, int argc,
+ char * const argv[])
+{
+ unsigned val;
+ int ret;
+ int confirmed = argc >= 1 && !strcmp(argv[1], "-y");
+
+ /* can be used in scripts for command availability check */
+ if (argc >= 1 && !strcmp(argv[1], "-n"))
+ return CMD_RET_SUCCESS;
+
+ /* boot cfg */
+ fuse_sense(0, 5, &val);
+ printf("Fuse 0, 5: %8x\n", val);
+ if (val & 0x10) {
+ puts("Fast boot mode already fused, no need to fuse\n");
+ return CMD_RET_SUCCESS;
+ }
+ if (!confirmed) {
+ puts("Warning: Programming fuses is an irreversible operation!\n"
+ " Updating to fast boot mode prevents easy\n"
+ " downgrading to previous BSP versions.\n"
+ "\nReally perform this fuse programming? <y/N>\n");
+ if (!confirm_yesno())
+ return CMD_RET_FAILURE;
+ }
+ puts("Fusing fast boot mode...\n");
+ ret = fuse_prog(0, 5, 0x00005072);
+ if (ret == CMD_RET_SUCCESS)
+ puts("done.\n");
+ else
+ puts("failed.\n");
+ return ret;
+}
+
+U_BOOT_CMD(
+ mfgr_fuse, 1, 0, do_mfgr_fuse,
+ "OTP fusing during module production",
+ ""
+);
+
+U_BOOT_CMD(
+ updt_fuse, 2, 0, do_updt_fuse,
+ "OTP fusing during module update",
+ "updt_fuse [-n] [-y] - boot cfg fast boot mode fusing"
+);
+#endif /* CONFIG_SPL_BUILD */
diff --git a/board/toradex/colibri_imx6/pf0100.c b/board/toradex/colibri_imx6/pf0100.c
new file mode 100644
index 0000000..618c571
--- /dev/null
+++ b/board/toradex/colibri_imx6/pf0100.c
@@ -0,0 +1,211 @@
+/*
+ * Copyright (C) 2014-2016, Toradex AG
+ *
+ * SPDX-License-Identifier: GPL-2.0+
+ */
+
+/*
+ * Helpers for Freescale PMIC PF0100
+*/
+
+#include <common.h>
+#include <i2c.h>
+#include <asm/arch/imx-regs.h>
+#include <asm/arch/iomux.h>
+#include <asm/arch/mx6-pins.h>
+#include <asm/gpio.h>
+#include <asm/imx-common/iomux-v3.h>
+
+#include "pf0100_otp.inc"
+#include "pf0100.h"
+
+/* define for PMIC register dump */
+/*#define DEBUG */
+
+/* use GPIO: EXT_IO1 to switch on VPGM, ON: 1 */
+static iomux_v3_cfg_t const pmic_prog_pads[] = {
+ MX6_PAD_NANDF_D3__GPIO2_IO03 | MUX_PAD_CTRL(NO_PAD_CTRL),
+# define PMIC_PROG_VOLTAGE IMX_GPIO_NR(2, 3)
+};
+
+unsigned pmic_init(void)
+{
+ unsigned programmed = 0;
+ uchar bus = 1;
+ uchar devid, revid, val;
+
+ puts("PMIC: ");
+ if (!((0 == i2c_set_bus_num(bus)) &&
+ (0 == i2c_probe(PFUZE100_I2C_ADDR)))) {
+ puts("i2c bus failed\n");
+ return 0;
+ }
+ /* get device ident */
+ if (i2c_read(PFUZE100_I2C_ADDR, PFUZE100_DEVICEID, 1, &devid, 1) < 0) {
+ puts("i2c pmic devid read failed\n");
+ return 0;
+ }
+ if (i2c_read(PFUZE100_I2C_ADDR, PFUZE100_REVID, 1, &revid, 1) < 0) {
+ puts("i2c pmic revid read failed\n");
+ return 0;
+ }
+ printf("device id: 0x%.2x, revision id: 0x%.2x\n", devid, revid);
+
+#ifdef DEBUG
+ {
+ unsigned i, j;
+
+ for (i = 0; i < 16; i++)
+ printf("\t%x", i);
+ for (j = 0; j < 0x80; ) {
+ printf("\n%2x", j);
+ for (i = 0; i < 16; i++) {
+ i2c_read(PFUZE100_I2C_ADDR, j+i, 1, &val, 1);
+ printf("\t%2x", val);
+ }
+ j += 0x10;
+ }
+ printf("\nEXT Page 1");
+
+ val = PFUZE100_PAGE_REGISTER_PAGE1;
+ if (i2c_write(PFUZE100_I2C_ADDR, PFUZE100_PAGE_REGISTER, 1,
+ &val, 1)) {
+ puts("i2c write failed\n");
+ return 0;
+ }
+
+ for (j = 0x80; j < 0x100; ) {
+ printf("\n%2x", j);
+ for (i = 0; i < 16; i++) {
+ i2c_read(PFUZE100_I2C_ADDR, j+i, 1, &val, 1);
+ printf("\t%2x", val);
+ }
+ j += 0x10;
+ }
+ printf("\nEXT Page 2");
+
+ val = PFUZE100_PAGE_REGISTER_PAGE2;
+ if (i2c_write(PFUZE100_I2C_ADDR, PFUZE100_PAGE_REGISTER, 1,
+ &val, 1)) {
+ puts("i2c write failed\n");
+ return 0;
+ }
+
+ for (j = 0x80; j < 0x100; ) {
+ printf("\n%2x", j);
+ for (i = 0; i < 16; i++) {
+ i2c_read(PFUZE100_I2C_ADDR, j+i, 1, &val, 1);
+ printf("\t%2x", val);
+ }
+ j += 0x10;
+ }
+ printf("\n");
+ }
+#endif
+ /* get device programmed state */
+ val = PFUZE100_PAGE_REGISTER_PAGE1;
+ if (i2c_write(PFUZE100_I2C_ADDR, PFUZE100_PAGE_REGISTER, 1, &val, 1)) {
+ puts("i2c write failed\n");
+ return 0;
+ }
+ if (i2c_read(PFUZE100_I2C_ADDR, PFUZE100_FUSE_POR1, 1, &val, 1) < 0) {
+ puts("i2c fuse_por read failed\n");
+ return 0;
+ }
+ if (val & PFUZE100_FUSE_POR_M)
+ programmed++;
+
+ if (i2c_read(PFUZE100_I2C_ADDR, PFUZE100_FUSE_POR2, 1, &val, 1) < 0) {
+ puts("i2c fuse_por read failed\n");
+ return programmed;
+ }
+ if (val & PFUZE100_FUSE_POR_M)
+ programmed++;
+
+ if (i2c_read(PFUZE100_I2C_ADDR, PFUZE100_FUSE_POR3, 1, &val, 1) < 0) {
+ puts("i2c fuse_por read failed\n");
+ return programmed;
+ }
+ if (val & PFUZE100_FUSE_POR_M)
+ programmed++;
+
+ switch (programmed) {
+ case 0:
+ printf("PMIC: not programmed\n");
+ break;
+ case 3:
+ printf("PMIC: programmed\n");
+ break;
+ default:
+ printf("PMIC: undefined programming state\n");
+ break;
+ }
+
+ return programmed;
+}
+
+int pf0100_prog(void)
+{
+ unsigned char bus = 1;
+ unsigned char val;
+ unsigned int i;
+
+ if (pmic_init() == 3) {
+ puts("PMIC already programmed, exiting\n");
+ return CMD_RET_FAILURE;
+ }
+ /* set up gpio to manipulate vprog, initially off */
+ imx_iomux_v3_setup_multiple_pads(pmic_prog_pads,
+ ARRAY_SIZE(pmic_prog_pads));
+ gpio_direction_output(PMIC_PROG_VOLTAGE, 0);
+
+ if (!((0 == i2c_set_bus_num(bus)) &&
+ (0 == i2c_probe(PFUZE100_I2C_ADDR)))) {
+ puts("i2c bus failed\n");
+ return CMD_RET_FAILURE;
+ }
+
+ for (i = 0; i < ARRAY_SIZE(pmic_otp_prog); i++) {
+ switch (pmic_otp_prog[i].cmd) {
+ case pmic_i2c:
+ val = (unsigned char) (pmic_otp_prog[i].value & 0xff);
+ if (i2c_write(PFUZE100_I2C_ADDR, pmic_otp_prog[i].reg,
+ 1, &val, 1)) {
+ printf("i2c write failed, reg 0x%2x, value 0x%2x\n",
+ pmic_otp_prog[i].reg, val);
+ return CMD_RET_FAILURE;
+ }
+ break;
+ case pmic_delay:
+ udelay(pmic_otp_prog[i].value * 1000);
+ break;
+ case pmic_vpgm:
+ gpio_direction_output(PMIC_PROG_VOLTAGE,
+ pmic_otp_prog[i].value);
+ break;
+ case pmic_pwr:
+ /* TODO */
+ break;
+ }
+ }
+ return CMD_RET_SUCCESS;
+}
+
+int do_pf0100_prog(cmd_tbl_t *cmdtp, int flag, int argc,
+ char * const argv[])
+{
+ int ret;
+ puts("Programming PMIC OTP...");
+ ret = pf0100_prog();
+ if (ret == CMD_RET_SUCCESS)
+ puts("done.\n");
+ else
+ puts("failed.\n");
+ return ret;
+}
+
+U_BOOT_CMD(
+ pf0100_otp_prog, 1, 0, do_pf0100_prog,
+ "Program the OTP fuses on the PMIC PF0100",
+ ""
+);
diff --git a/board/toradex/colibri_imx6/pf0100.h b/board/toradex/colibri_imx6/pf0100.h
new file mode 100644
index 0000000..c84cab8
--- /dev/null
+++ b/board/toradex/colibri_imx6/pf0100.h
@@ -0,0 +1,56 @@
+/*
+ * Copyright (C) 2014-2016, Toradex AG
+ *
+ * SPDX-License-Identifier: GPL-2.0+
+ */
+
+/*
+ * Helpers for Freescale PMIC PF0100
+*/
+
+#ifndef PF0100_H_
+#define PF0100_H_
+
+/* 7-bit I2C bus slave address */
+#define PFUZE100_I2C_ADDR (0x08)
+/* Register Addresses */
+#define PFUZE100_DEVICEID (0x0)
+#define PFUZE100_REVID (0x3)
+#define PFUZE100_SW1AMODE (0x23)
+#define PFUZE100_SW1ACON 36
+#define PFUZE100_SW1ACON_SPEED_VAL (0x1<<6) /*default */
+#define PFUZE100_SW1ACON_SPEED_M (0x3<<6)
+#define PFUZE100_SW1CCON 49
+#define PFUZE100_SW1CCON_SPEED_VAL (0x1<<6) /*default */
+#define PFUZE100_SW1CCON_SPEED_M (0x3<<6)
+#define PFUZE100_SW1AVOL 32
+#define PFUZE100_SW1AVOL_VSEL_M (0x3f<<0)
+#define PFUZE100_SW1CVOL 46
+#define PFUZE100_SW1CVOL_VSEL_M (0x3f<<0)
+#define PFUZE100_VGEN1CTL (0x6c)
+#define PFUZE100_VGEN1_VAL (0x30 + 0x08) /* Always ON, 1.2V */
+#define PFUZE100_SWBSTCTL (0x66)
+/* Always ON, Auto Switching Mode, 5.0V */
+#define PFUZE100_SWBST_VAL (0x40 + 0x08 + 0x00)
+
+/* chooses the extended page (registers 0x80..0xff) */
+#define PFUZE100_PAGE_REGISTER 0x7f
+#define PFUZE100_PAGE_REGISTER_PAGE_M (0x1f << 0)
+#define PFUZE100_PAGE_REGISTER_PAGE1 (0x01 & PFUZE100_PAGE_REGISTER_PAGE_M)
+#define PFUZE100_PAGE_REGISTER_PAGE2 (0x02 & PFUZE100_PAGE_REGISTER_PAGE_M)
+
+/* extended page 1 */
+#define PFUZE100_FUSE_POR1 0xe4
+#define PFUZE100_FUSE_POR2 0xe5
+#define PFUZE100_FUSE_POR3 0xe6
+#define PFUZE100_FUSE_POR_M (0x1 << 1)
+
+
+/* output some informational messages, return the number FUSE_POR=1 */
+/* i.e. 0: unprogrammed, 3: programmed, other: undefined prog. state */
+unsigned pmic_init(void);
+
+/* programmes OTP fuses to values required on a Toradex Apalis iMX6 */
+int pf0100_prog(void);
+
+#endif /* PF0100_H_ */
diff --git a/board/toradex/colibri_imx6/pf0100_otp.inc b/board/toradex/colibri_imx6/pf0100_otp.inc
new file mode 100644
index 0000000..255392b
--- /dev/null
+++ b/board/toradex/colibri_imx6/pf0100_otp.inc
@@ -0,0 +1,189 @@
+/*
+ * Copyright (C) 2014-2016, Toradex AG
+ *
+ * SPDX-License-Identifier: GPL-2.0+
+ */
+
+// Register Output for PF0100 programmer
+// Customer: Toradex AG
+// Program: Colibri iMX6
+// Sample marking:
+// Date: 24.07.2015
+// Time: 10:52:58
+// Generated from Spreadsheet Revision: P1.8
+
+/* sed commands to get from programmer script to struct */
+/* sed -e 's/^WRITE_I2C:\(..\):\(..\)/\{pmic_i2c, 0x\1, 0x\2\},/g' -e 's/^DELAY:\([0-9]*\)/\{pmic_delay, 0, \1\},/g' pf0100_otp_Colibri_iMX6.txt > pf0100_otp.inc
+ sed -i -e 's/^VPGM:ON/\{pmic_vpgm, 0, 1},/g' -e 's/^VPGM:OFF/\{pmic_vpgm, 0, 0},/g' pf0100_otp.inc
+ sed -i -e 's/^PWRON: HIGH/\{pmic_pwr, 0, 1},/g' -e 's/^PWRON:LOW/\{pmic_pwr, 0, 0},/g' pf0100_otp.inc */
+
+enum { pmic_i2c, pmic_delay, pmic_vpgm, pmic_pwr };
+struct pmic_otp_prog_t{
+ unsigned char cmd;
+ unsigned char reg;
+ unsigned short value;
+};
+
+struct pmic_otp_prog_t pmic_otp_prog[] = {
+{pmic_i2c, 0x7F, 0x01}, // Access FSL EXT Page 1
+{pmic_i2c, 0xA0, 0x2B}, // Auto gen from Row94
+{pmic_i2c, 0xA1, 0x01}, // Auto gen from Row95
+{pmic_i2c, 0xA2, 0x05}, // Auto gen from Row96
+{pmic_i2c, 0xA8, 0x2B}, // Auto gen from Row102
+{pmic_i2c, 0xA9, 0x02}, // Auto gen from Row103
+{pmic_i2c, 0xAA, 0x01}, // Auto gen from Row104
+{pmic_i2c, 0xAC, 0x18}, // Auto gen from Row106
+{pmic_i2c, 0xAE, 0x01}, // Auto gen from Row108
+{pmic_i2c, 0xB0, 0x2C}, // Auto gen from Row110
+{pmic_i2c, 0xB1, 0x04}, // Auto gen from Row111
+{pmic_i2c, 0xB2, 0x01}, // Auto gen from Row112
+{pmic_i2c, 0xB4, 0x2C}, // Auto gen from Row114
+{pmic_i2c, 0xB5, 0x04}, // Auto gen from Row115
+{pmic_i2c, 0xB6, 0x01}, // Auto gen from Row116
+{pmic_i2c, 0xB8, 0x18}, // Auto gen from Row118
+{pmic_i2c, 0xBA, 0x01}, // Auto gen from Row120
+{pmic_i2c, 0xBD, 0x0E}, // Auto gen from Row123
+{pmic_i2c, 0xC0, 0x06}, // Auto gen from Row126
+{pmic_i2c, 0xC4, 0x04}, // Auto gen from Row130
+{pmic_i2c, 0xC8, 0x0E}, // Auto gen from Row134
+{pmic_i2c, 0xCC, 0x0E}, // Auto gen from Row138
+{pmic_i2c, 0xCD, 0x05}, // Auto gen from Row139
+{pmic_i2c, 0xD0, 0x0C}, // Auto gen from Row142
+{pmic_i2c, 0xD5, 0x07}, // Auto gen from Row147
+{pmic_i2c, 0xD8, 0x07}, // Auto gen from Row150
+{pmic_i2c, 0xD9, 0x06}, // Auto gen from Row151
+{pmic_i2c, 0xDC, 0x0A}, // Auto gen from Row154
+{pmic_i2c, 0xDD, 0x03}, // Auto gen from Row155
+{pmic_i2c, 0xE0, 0x05}, // Auto gen from Row158
+
+#if 0 /* TBB mode */
+{pmic_i2c, 0xE4, 0x80}, // TBB_POR = 1
+{pmic_delay, 0, 10},
+#else
+// Write OTP
+{pmic_i2c, 0xE4, 0x02}, // FUSE POR1=1
+{pmic_i2c, 0xE5, 0x02}, // FUSE POR2=1
+{pmic_i2c, 0xE6, 0x02}, // FUSE POR3=1
+{pmic_i2c, 0xF0, 0x1F}, // Enable ECC for fuse banks 1 to 5 by writing to OTP EN ECC0 register
+{pmic_i2c, 0xF1, 0x1F}, // Enable ECC for fuse banks 6 to 10 by writing to OTP EN ECC1 register
+{pmic_i2c, 0x7F, 0x02}, // Access PF0100 EXT Page2
+{pmic_i2c, 0xD0, 0x1F}, // Set Auto ECC for fuse banks 1 to 5 by writing to OTP AUTO ECC0 register
+{pmic_i2c, 0xD1, 0x1F}, // Set Auto ECC for fuse banks 6 to 10 by writing to OTP AUTO ECC1 register
+//-----------------------------------------------------------------------------------
+{pmic_i2c, 0xF1, 0x00}, // Reset Bank 1 ANTIFUSE_RW and ANTIFUSE_BYPASS bits
+{pmic_i2c, 0xF2, 0x00}, // Reset Bank 2 ANTIFUSE_RW and ANTIFUSE_BYPASS bits
+{pmic_i2c, 0xF3, 0x00}, // Reset Bank 3 ANTIFUSE_RW and ANTIFUSE_BYPASS bits
+{pmic_i2c, 0xF4, 0x00}, // Reset Bank 4 ANTIFUSE_RW and ANTIFUSE_BYPASS bits
+{pmic_i2c, 0xF5, 0x00}, // Reset Bank 5 ANTIFUSE_RW and ANTIFUSE_BYPASS bits
+{pmic_i2c, 0xF6, 0x00}, // Reset Bank 6 ANTIFUSE_RW and ANTIFUSE_BYPASS bits
+{pmic_i2c, 0xF7, 0x00}, // Reset Bank 7 ANTIFUSE_RW and ANTIFUSE_BYPASS bits
+{pmic_i2c, 0xF8, 0x00}, // Reset Bank 8 ANTIFUSE_RW and ANTIFUSE_BYPASS bits
+{pmic_i2c, 0xF9, 0x00}, // Reset Bank 9 ANTIFUSE_RW and ANTIFUSE_BYPASS bits
+{pmic_i2c, 0xFA, 0x00}, // Reset Bank 10 ANTIFUSE_RW and ANTIFUSE_BYPASS bits
+//-----------------------------------------------------------------------------------
+{pmic_vpgm, 0, 1}, // Turn ON 8V SWBST
+//VPGM:DOWN:n
+//VPGM:UP:n
+{pmic_delay, 0, 500}, // Adds 500msec delay to allow VPGM time to ramp up
+//-----------------------------------------------------------------------------------
+// PF0100 OTP MANUAL-PROGRAMMING (BANK 1 thru 10)
+//-----------------------------------------------------------------------------------
+// BANK 1
+//-----------------------------------------------------------------------------------
+{pmic_i2c, 0xF1, 0x00}, // Reset Bank 1 ANTIFUSE_RW and ANTIFUSE_BYPASS bits
+{pmic_i2c, 0xF1, 0x03}, // Set Bank 1 ANTIFUSE_RW and ANTIFUSE_BYPASS bits
+{pmic_i2c, 0xF1, 0x0B}, // Set Bank 1 ANTIFUSE_EN
+{pmic_delay, 0, 10}, // Allow time for bank programming to complete
+{pmic_i2c, 0xF1, 0x03}, // Reset Bank 1 ANTIFUSE_EN
+{pmic_i2c, 0xF1, 0x00}, // Reset Bank 1 ANTIFUSE_RW and ANTIFUSE_BYPASS bits
+//-----------------------------------------------------------------------------------
+// BANK 2
+//-----------------------------------------------------------------------------------
+{pmic_i2c, 0xF2, 0x00}, // Reset Bank 2 ANTIFUSE_RW and ANTIFUSE_BYPASS bits
+{pmic_i2c, 0xF2, 0x03}, // Set Bank 2 ANTIFUSE_RW and ANTIFUSE_BYPASS bits
+{pmic_i2c, 0xF2, 0x0B}, // Set Bank 2 ANTIFUSE_EN
+{pmic_delay, 0, 10}, // Allow time for bank programming to complete
+{pmic_i2c, 0xF2, 0x03}, // Reset Bank 2 ANTIFUSE_EN
+{pmic_i2c, 0xF2, 0x00}, // Reset Bank 2 ANTIFUSE_RW and ANTIFUSE_BYPASS bits
+//-----------------------------------------------------------------------------------
+// BANK 3
+//-----------------------------------------------------------------------------------
+{pmic_i2c, 0xF3, 0x00}, // Reset Bank 3 ANTIFUSE_RW and ANTIFUSE_BYPASS bits
+{pmic_i2c, 0xF3, 0x03}, // Set Bank 3 ANTIFUSE_RW and ANTIFUSE_BYPASS bits
+{pmic_i2c, 0xF3, 0x0B}, // Set Bank 3 ANTIFUSE_EN
+{pmic_delay, 0, 10}, // Allow time for bank programming to complete
+{pmic_i2c, 0xF3, 0x03}, // Reset Bank 3 ANTIFUSE_EN
+{pmic_i2c, 0xF3, 0x00}, // Reset Bank 3 ANTIFUSE_RW and ANTIFUSE_BYPASS bits
+//-----------------------------------------------------------------------------------
+// BANK 4
+//-----------------------------------------------------------------------------------
+{pmic_i2c, 0xF4, 0x00}, // Reset Bank 4 ANTIFUSE_RW and ANTIFUSE_BYPASS bits
+{pmic_i2c, 0xF4, 0x03}, // Set Bank 4 ANTIFUSE_RW and ANTIFUSE_BYPASS bits
+{pmic_i2c, 0xF4, 0x0B}, // Set Bank 4 ANTIFUSE_EN
+{pmic_delay, 0, 10}, // Allow time for bank programming to complete
+{pmic_i2c, 0xF4, 0x03}, // Reset Bank 4 ANTIFUSE_EN
+{pmic_i2c, 0xF4, 0x00}, // Reset Bank 4 ANTIFUSE_RW and ANTIFUSE_BYPASS bits
+//-----------------------------------------------------------------------------------
+// BANK 5
+//-----------------------------------------------------------------------------------
+{pmic_i2c, 0xF5, 0x00}, // Reset Bank 5 ANTIFUSE_RW and ANTIFUSE_BYPASS bits
+{pmic_i2c, 0xF5, 0x03}, // Set Bank 5 ANTIFUSE_RW and ANTIFUSE_BYPASS bits
+{pmic_i2c, 0xF5, 0x0B}, // Set Bank 5 ANTIFUSE_EN
+{pmic_delay, 0, 10}, // Allow time for bank programming to complete
+{pmic_i2c, 0xF5, 0x03}, // Reset Bank 5 ANTIFUSE_EN
+{pmic_i2c, 0xF5, 0x00}, // Reset Bank 5 ANTIFUSE_RW and ANTIFUSE_BYPASS bits
+//-----------------------------------------------------------------------------------
+// BANK 6
+//-----------------------------------------------------------------------------------
+{pmic_i2c, 0xF6, 0x00}, // Reset Bank 6 ANTIFUSE_RW and ANTIFUSE_BYPASS bits
+{pmic_i2c, 0xF6, 0x03}, // Set Bank 6 ANTIFUSE_RW and ANTIFUSE_BYPASS bits
+{pmic_i2c, 0xF6, 0x0B}, // Set Bank 6 ANTIFUSE_EN
+{pmic_delay, 0, 10}, // Allow time for bank programming to complete
+{pmic_i2c, 0xF6, 0x03}, // Reset Bank 6 ANTIFUSE_EN
+{pmic_i2c, 0xF6, 0x00}, // Reset Bank 6 ANTIFUSE_RW and ANTIFUSE_BYPASS bits
+//-----------------------------------------------------------------------------------
+// BANK 7
+//-----------------------------------------------------------------------------------
+{pmic_i2c, 0xF7, 0x00}, // Reset Bank 7 ANTIFUSE_RW and ANTIFUSE_BYPASS bits
+{pmic_i2c, 0xF7, 0x03}, // Set Bank 7 ANTIFUSE_RW and ANTIFUSE_BYPASS bits
+{pmic_i2c, 0xF7, 0x0B}, // Set Bank 7 ANTIFUSE_EN
+{pmic_delay, 0, 10}, // Allow time for bank programming to complete
+{pmic_i2c, 0xF7, 0x03}, // Reset Bank 7 ANTIFUSE_EN
+{pmic_i2c, 0xF7, 0x00}, // Reset Bank 7 ANTIFUSE_RW and ANTIFUSE_BYPASS bits
+//-----------------------------------------------------------------------------------
+// BANK 8
+//-----------------------------------------------------------------------------------
+{pmic_i2c, 0xF8, 0x00}, // Reset Bank 8 ANTIFUSE_RW and ANTIFUSE_BYPASS bits
+{pmic_i2c, 0xF8, 0x03}, // Set Bank 8 ANTIFUSE_RW and ANTIFUSE_BYPASS bits
+{pmic_i2c, 0xF8, 0x0B}, // Set Bank 8 ANTIFUSE_EN
+{pmic_delay, 0, 10}, // Allow time for bank programming to complete
+{pmic_i2c, 0xF8, 0x03}, // Reset Bank 8 ANTIFUSE_EN
+{pmic_i2c, 0xF8, 0x00}, // Reset Bank 8 ANTIFUSE_RW and ANTIFUSE_BYPASS bits
+//-----------------------------------------------------------------------------------
+// BANK 9
+//-----------------------------------------------------------------------------------
+{pmic_i2c, 0xF9, 0x00}, // Reset Bank 9 ANTIFUSE_RW and ANTIFUSE_BYPASS bits
+{pmic_i2c, 0xF9, 0x03}, // Set Bank 9 ANTIFUSE_RW and ANTIFUSE_BYPASS bits
+{pmic_i2c, 0xF9, 0x0B}, // Set Bank 9 ANTIFUSE_EN
+{pmic_delay, 0, 10}, // Allow time for bank programming to complete
+{pmic_i2c, 0xF9, 0x03}, // Reset Bank 9 ANTIFUSE_EN
+{pmic_i2c, 0xF9, 0x00}, // Reset Bank 9 ANTIFUSE_RW and ANTIFUSE_BYPASS bits
+//-----------------------------------------------------------------------------------
+// BANK 10
+//-----------------------------------------------------------------------------------
+{pmic_i2c, 0xFA, 0x00}, // Reset Bank 10 ANTIFUSE_RW and ANTIFUSE_BYPASS bits
+{pmic_i2c, 0xFA, 0x03}, // Set Bank 10 ANTIFUSE_RW and ANTIFUSE_BYPASS bits
+{pmic_i2c, 0xFA, 0x0B}, // Set Bank 10 ANTIFUSE_EN
+{pmic_delay, 0, 10}, // Allow time for bank programming to complete
+{pmic_i2c, 0xFA, 0x03}, // Reset Bank 10 ANTIFUSE_EN
+{pmic_i2c, 0xFA, 0x00}, // Reset Bank 10 ANTIFUSE_RW and ANTIFUSE_BYPASS bits
+//-----------------------------------------------------------------------------------
+{pmic_vpgm, 0, 0}, // Turn off 8V SWBST
+{pmic_delay, 0, 500}, // Adds delay to allow VPGM to bleed off
+{pmic_i2c, 0xD0, 0x00}, // Clear
+{pmic_i2c, 0xD1, 0x00}, // Clear
+{pmic_pwr, 0, 0}, // PWRON LOW to reload new OTP data
+{pmic_delay, 0, 500},
+{pmic_pwr, 0, 1},
+#endif
+};
\ No newline at end of file
diff --git a/board/toradex/colibri_imx7/colibri_imx7.c b/board/toradex/colibri_imx7/colibri_imx7.c
index c64e31e..e1340c3 100644
--- a/board/toradex/colibri_imx7/colibri_imx7.c
+++ b/board/toradex/colibri_imx7/colibri_imx7.c
@@ -24,6 +24,7 @@
#include <power/pmic.h>
#include <power/rn5t567_pmic.h>
#include <usb/ehci-ci.h>
+#include "../common/tdx-common.h"
DECLARE_GLOBAL_DATA_PTR;
@@ -387,6 +388,13 @@
return 0;
}
+#if defined(CONFIG_OF_LIBFDT) && defined(CONFIG_OF_BOARD_SETUP)
+int ft_board_setup(void *blob, bd_t *bd)
+{
+ return ft_common_board_setup(blob, bd);
+}
+#endif
+
#ifdef CONFIG_USB_EHCI_MX7
static iomux_v3_cfg_t const usb_otg2_pads[] = {
MX7D_PAD_UART3_CTS_B__USB_OTG2_PWR | MUX_PAD_CTRL(NO_PAD_CTRL),
diff --git a/board/toradex/colibri_pxa270/colibri_pxa270.c b/board/toradex/colibri_pxa270/colibri_pxa270.c
index 932b900..8e94854 100644
--- a/board/toradex/colibri_pxa270/colibri_pxa270.c
+++ b/board/toradex/colibri_pxa270/colibri_pxa270.c
@@ -18,6 +18,7 @@
#include <netdev.h>
#include <serial.h>
#include <usb.h>
+#include "../common/tdx-common.h"
DECLARE_GLOBAL_DATA_PTR;
@@ -43,6 +44,13 @@
return 0;
}
+#if defined(CONFIG_OF_LIBFDT) && defined(CONFIG_OF_BOARD_SETUP)
+int ft_board_setup(void *blob, bd_t *bd)
+{
+ return ft_common_board_setup(blob, bd);
+}
+#endif
+
int dram_init(void)
{
pxa2xx_dram_init();
diff --git a/board/toradex/colibri_t20/colibri_t20.c b/board/toradex/colibri_t20/colibri_t20.c
index 01b55be..4d298e6 100644
--- a/board/toradex/colibri_t20/colibri_t20.c
+++ b/board/toradex/colibri_t20/colibri_t20.c
@@ -15,6 +15,7 @@
#include <asm/io.h>
#include <i2c.h>
#include <nand.h>
+#include "../common/tdx-common.h"
DECLARE_GLOBAL_DATA_PTR;
@@ -74,6 +75,13 @@
return 0;
}
+#if defined(CONFIG_OF_LIBFDT) && defined(CONFIG_OF_BOARD_SETUP)
+int ft_board_setup(void *blob, bd_t *bd)
+{
+ return ft_common_board_setup(blob, bd);
+}
+#endif
+
#ifdef CONFIG_TEGRA_MMC
/*
* Routine: pin_mux_mmc
diff --git a/board/toradex/colibri_t30/colibri_t30.c b/board/toradex/colibri_t30/colibri_t30.c
index 707d07e..b68d3ca 100644
--- a/board/toradex/colibri_t30/colibri_t30.c
+++ b/board/toradex/colibri_t30/colibri_t30.c
@@ -14,6 +14,7 @@
#include <asm/io.h>
#include <i2c.h>
#include "pinmux-config-colibri_t30.h"
+#include "../common/tdx-common.h"
int arch_misc_init(void)
{
@@ -31,6 +32,13 @@
return 0;
}
+#if defined(CONFIG_OF_LIBFDT) && defined(CONFIG_OF_BOARD_SETUP)
+int ft_board_setup(void *blob, bd_t *bd)
+{
+ return ft_common_board_setup(blob, bd);
+}
+#endif
+
/*
* Routine: pinmux_init
* Description: Do individual peripheral pinmux configs
diff --git a/board/toradex/colibri_vf/colibri_vf.c b/board/toradex/colibri_vf/colibri_vf.c
index e65d9c3..7b74eb7 100644
--- a/board/toradex/colibri_vf/colibri_vf.c
+++ b/board/toradex/colibri_vf/colibri_vf.c
@@ -15,13 +15,17 @@
#include <asm/arch/crm_regs.h>
#include <asm/arch/clock.h>
#include <mmc.h>
+#include <fdt_support.h>
#include <fsl_esdhc.h>
+#include <jffs2/load_kernel.h>
#include <miiphy.h>
+#include <mtd_node.h>
#include <netdev.h>
#include <i2c.h>
#include <g_dnl.h>
#include <asm/gpio.h>
#include <usb.h>
+#include "../common/tdx-common.h"
DECLARE_GLOBAL_DATA_PTR;
@@ -364,12 +368,18 @@
clrsetbits_le32(&ccm->ccgr10, CCM_REG_CTRL_MASK,
CCM_CCGR10_NFC_CTRL_MASK);
-#ifdef CONFIG_CI_UDC
+#ifdef CONFIG_USB_EHCI_VF
setbits_le32(&ccm->ccgr1, CCM_CCGR1_USBC0_CTRL_MASK);
-#endif
-
-#ifdef CONFIG_USB_EHCI
setbits_le32(&ccm->ccgr7, CCM_CCGR7_USBC1_CTRL_MASK);
+
+ clrsetbits_le32(&anadig->pll3_ctrl, ANADIG_PLL3_CTRL_BYPASS |
+ ANADIG_PLL3_CTRL_POWERDOWN |
+ ANADIG_PLL3_CTRL_DIV_SELECT,
+ ANADIG_PLL3_CTRL_ENABLE);
+ clrsetbits_le32(&anadig->pll7_ctrl, ANADIG_PLL7_CTRL_BYPASS |
+ ANADIG_PLL7_CTRL_POWERDOWN |
+ ANADIG_PLL7_CTRL_DIV_SELECT,
+ ANADIG_PLL7_CTRL_ENABLE);
#endif
clrsetbits_le32(&anadig->pll5_ctrl, ANADIG_PLL5_CTRL_BYPASS |
@@ -418,7 +428,7 @@
CCM_CSCDR2_ESDHC1_EN | CCM_CSCDR2_ESDHC1_CLK_DIV(0) |
CCM_CSCDR2_NFC_EN);
clrsetbits_le32(&ccm->cscdr3, CCM_REG_CTRL_MASK,
- CCM_CSCDR3_NFC_PRE_DIV(5));
+ CCM_CSCDR3_NFC_PRE_DIV(3));
clrsetbits_le32(&ccm->cscmr2, CCM_REG_CTRL_MASK,
CCM_CSCMR2_RMII_CLK_SEL(2));
}
@@ -527,6 +537,23 @@
return 0;
}
+
+#if defined(CONFIG_OF_LIBFDT) && defined(CONFIG_OF_BOARD_SETUP)
+int ft_board_setup(void *blob, bd_t *bd)
+{
+#ifdef CONFIG_FDT_FIXUP_PARTITIONS
+ static struct node_info nodes[] = {
+ { "fsl,vf610-nfc", MTD_DEV_TYPE_NAND, }, /* NAND flash */
+ };
+
+ /* Update partition nodes using info from mtdparts env var */
+ puts(" Updating MTD partitions...\n");
+ fdt_fixup_mtdparts(blob, nodes, ARRAY_SIZE(nodes));
+#endif
+
+ return ft_common_board_setup(blob, bd);
+}
+#endif
#ifdef CONFIG_USB_EHCI_VF
int board_ehci_hcd_init(int port)
diff --git a/board/toradex/common/tdx-common.c b/board/toradex/common/tdx-common.c
index f1ab794..2c6fc40 100644
--- a/board/toradex/common/tdx-common.c
+++ b/board/toradex/common/tdx-common.c
@@ -108,7 +108,7 @@
return 0;
}
-#ifdef CONFIG_USBDOWNLOAD_GADGET
+#ifdef CONFIG_USB_GADGET_DOWNLOAD
int g_dnl_bind_fixup(struct usb_device_descriptor *dev, const char *name)
{
unsigned short usb_pid;
@@ -118,10 +118,10 @@
return 0;
}
-#endif /* CONFIG_USBDOWNLOAD_GADGET */
+#endif
-#if defined(CONFIG_OF_LIBFDT) && defined(CONFIG_OF_BOARD_SETUP)
-int ft_board_setup(void *blob, bd_t *bd)
+#if defined(CONFIG_OF_LIBFDT)
+int ft_common_board_setup(void *blob, bd_t *bd)
{
if (tdx_serial) {
fdt_setprop(blob, 0, "serial-number", tdx_serial_str,
@@ -158,11 +158,9 @@
}
#endif /* CONFIG_SERIAL_TAG */
-#if defined(CONFIG_OF_LIBFDT) && defined(CONFIG_OF_BOARD_SETUP)
-int ft_board_setup(void *blob, bd_t *bd)
+int ft_common_board_setup(void *blob, bd_t *bd)
{
return 0;
}
-#endif
#endif /* CONFIG_TDX_CFG_BLOCK */
diff --git a/board/toradex/common/tdx-common.h b/board/toradex/common/tdx-common.h
index f308ebd..f8d78f0 100644
--- a/board/toradex/common/tdx-common.h
+++ b/board/toradex/common/tdx-common.h
@@ -10,4 +10,6 @@
#define TORADEX_USB_PRODUCT_NUM_OFFSET 0x4000
#define TDX_USB_VID 0x1B67
+int ft_common_board_setup(void *blob, bd_t *bd);
+
#endif /* _TDX_COMMON_H */
diff --git a/board/udoo/neo/neo.c b/board/udoo/neo/neo.c
index 7f17469..688b522 100644
--- a/board/udoo/neo/neo.c
+++ b/board/udoo/neo/neo.c
@@ -10,6 +10,7 @@
*/
#include <asm/arch/clock.h>
+#include <asm/arch/crm_regs.h>
#include <asm/arch/imx-regs.h>
#include <asm/arch/iomux.h>
#include <asm/arch/mx6-pins.h>
@@ -19,10 +20,17 @@
#include <fsl_esdhc.h>
#include <asm/arch/crm_regs.h>
#include <asm/io.h>
+#include <asm/imx-common/mxc_i2c.h>
#include <asm/arch/sys_proto.h>
#include <spl.h>
#include <linux/sizes.h>
#include <common.h>
+#include <i2c.h>
+#include <miiphy.h>
+#include <netdev.h>
+#include <power/pmic.h>
+#include <power/pfuze3000_pmic.h>
+#include <malloc.h>
DECLARE_GLOBAL_DATA_PTR;
@@ -41,6 +49,21 @@
PAD_CTL_PUS_22K_UP | PAD_CTL_SPEED_LOW | \
PAD_CTL_DSE_80ohm | PAD_CTL_SRE_FAST | PAD_CTL_HYS)
+#define I2C_PAD_CTRL (PAD_CTL_PKE | PAD_CTL_PUE | \
+ PAD_CTL_PUS_100K_UP | PAD_CTL_SPEED_MED | \
+ PAD_CTL_DSE_40ohm | PAD_CTL_HYS | \
+ PAD_CTL_ODE)
+
+#define ENET_PAD_CTRL (PAD_CTL_PUS_100K_UP | PAD_CTL_PUE | \
+ PAD_CTL_SPEED_MED | \
+ PAD_CTL_DSE_40ohm | PAD_CTL_SRE_FAST)
+
+#define ENET_CLK_PAD_CTRL (PAD_CTL_SPEED_MED | \
+ PAD_CTL_DSE_120ohm | PAD_CTL_SRE_FAST)
+
+#define ENET_RX_PAD_CTRL (PAD_CTL_PKE | PAD_CTL_PUE | \
+ PAD_CTL_SPEED_MED | PAD_CTL_SRE_FAST)
+
#define WDOG_PAD_CTRL (PAD_CTL_PUE | PAD_CTL_PKE | PAD_CTL_SPEED_MED | \
PAD_CTL_DSE_40ohm)
@@ -55,6 +78,136 @@
gd->ram_size = imx_ddr_size();
return 0;
}
+
+#ifdef CONFIG_SYS_I2C_MXC
+#define PC MUX_PAD_CTRL(I2C_PAD_CTRL)
+/* I2C1 for PMIC */
+static struct i2c_pads_info i2c_pad_info1 = {
+ .scl = {
+ .i2c_mode = MX6_PAD_GPIO1_IO00__I2C1_SCL | PC,
+ .gpio_mode = MX6_PAD_GPIO1_IO00__GPIO1_IO_0 | PC,
+ .gp = IMX_GPIO_NR(1, 0),
+ },
+ .sda = {
+ .i2c_mode = MX6_PAD_GPIO1_IO01__I2C1_SDA | PC,
+ .gpio_mode = MX6_PAD_GPIO1_IO01__GPIO1_IO_1 | PC,
+ .gp = IMX_GPIO_NR(1, 1),
+ },
+};
+#endif
+
+#ifdef CONFIG_POWER
+int power_init_board(void)
+{
+ struct pmic *p;
+ int ret;
+ unsigned int reg, rev_id;
+
+ ret = power_pfuze3000_init(PFUZE3000_I2C_BUS);
+ if (ret)
+ return ret;
+
+ p = pmic_get("PFUZE3000");
+ ret = pmic_probe(p);
+ if (ret)
+ return ret;
+
+ pmic_reg_read(p, PFUZE3000_DEVICEID, ®);
+ pmic_reg_read(p, PFUZE3000_REVID, &rev_id);
+ printf("PMIC: PFUZE3000 DEV_ID=0x%x REV_ID=0x%x\n", reg, rev_id);
+
+ /* disable Low Power Mode during standby mode */
+ pmic_reg_read(p, PFUZE3000_LDOGCTL, ®);
+ reg |= 0x1;
+ ret = pmic_reg_write(p, PFUZE3000_LDOGCTL, reg);
+ if (ret)
+ return ret;
+
+ ret = pmic_reg_write(p, PFUZE3000_SW1AMODE, 0xc);
+ if (ret)
+ return ret;
+
+ ret = pmic_reg_write(p, PFUZE3000_SW1BMODE, 0xc);
+ if (ret)
+ return ret;
+
+ ret = pmic_reg_write(p, PFUZE3000_SW2MODE, 0xc);
+ if (ret)
+ return ret;
+
+ ret = pmic_reg_write(p, PFUZE3000_SW3MODE, 0xc);
+ if (ret)
+ return ret;
+
+ /* set SW1A standby voltage 0.975V */
+ pmic_reg_read(p, PFUZE3000_SW1ASTBY, ®);
+ reg &= ~0x3f;
+ reg |= PFUZE3000_SW1AB_SETP(9750);
+ ret = pmic_reg_write(p, PFUZE3000_SW1ASTBY, reg);
+ if (ret)
+ return ret;
+
+ /* set SW1B standby voltage 0.975V */
+ pmic_reg_read(p, PFUZE3000_SW1BSTBY, ®);
+ reg &= ~0x3f;
+ reg |= PFUZE3000_SW1AB_SETP(9750);
+ ret = pmic_reg_write(p, PFUZE3000_SW1BSTBY, reg);
+ if (ret)
+ return ret;
+
+ /* set SW1A/VDD_ARM_IN step ramp up time from 16us to 4us/25mV */
+ pmic_reg_read(p, PFUZE3000_SW1ACONF, ®);
+ reg &= ~0xc0;
+ reg |= 0x40;
+ ret = pmic_reg_write(p, PFUZE3000_SW1ACONF, reg);
+ if (ret)
+ return ret;
+
+ /* set SW1B/VDD_SOC_IN step ramp up time from 16us to 4us/25mV */
+ pmic_reg_read(p, PFUZE3000_SW1BCONF, ®);
+ reg &= ~0xc0;
+ reg |= 0x40;
+ ret = pmic_reg_write(p, PFUZE3000_SW1BCONF, reg);
+ if (ret)
+ return ret;
+
+ /* set VDD_ARM_IN to 1.350V */
+ pmic_reg_read(p, PFUZE3000_SW1AVOLT, ®);
+ reg &= ~0x3f;
+ reg |= PFUZE3000_SW1AB_SETP(13500);
+ ret = pmic_reg_write(p, PFUZE3000_SW1AVOLT, reg);
+ if (ret)
+ return ret;
+
+ /* set VDD_SOC_IN to 1.350V */
+ pmic_reg_read(p, PFUZE3000_SW1BVOLT, ®);
+ reg &= ~0x3f;
+ reg |= PFUZE3000_SW1AB_SETP(13500);
+ ret = pmic_reg_write(p, PFUZE3000_SW1BVOLT, reg);
+ if (ret)
+ return ret;
+
+ /* set DDR_1_5V to 1.350V */
+ pmic_reg_read(p, PFUZE3000_SW3VOLT, ®);
+ reg &= ~0x0f;
+ reg |= PFUZE3000_SW3_SETP(13500);
+ ret = pmic_reg_write(p, PFUZE3000_SW3VOLT, reg);
+ if (ret)
+ return ret;
+
+ /* set VGEN2_1V5 to 1.5V */
+ pmic_reg_read(p, PFUZE3000_VLDO2CTL, ®);
+ reg &= ~0x0f;
+ reg |= PFUZE3000_VLDO_SETP(15000);
+ /* enable */
+ reg |= 0x10;
+ ret = pmic_reg_write(p, PFUZE3000_VLDO2CTL, reg);
+ if (ret)
+ return ret;
+
+ return 0;
+}
+#endif
static iomux_v3_cfg_t const uart1_pads[] = {
MX6_PAD_GPIO1_IO04__UART1_TX | MUX_PAD_CTRL(UART_PAD_CTRL),
@@ -74,6 +227,27 @@
MX6_PAD_SD1_CMD__GPIO6_IO_1 | MUX_PAD_CTRL(NO_PAD_CTRL),
};
+static iomux_v3_cfg_t const fec1_pads[] = {
+ MX6_PAD_ENET1_MDC__ENET1_MDC | MUX_PAD_CTRL(ENET_PAD_CTRL),
+ MX6_PAD_ENET1_MDIO__ENET1_MDIO | MUX_PAD_CTRL(ENET_PAD_CTRL),
+ MX6_PAD_RGMII1_RX_CTL__ENET1_RX_EN | MUX_PAD_CTRL(ENET_RX_PAD_CTRL),
+ MX6_PAD_RGMII1_RD0__ENET1_RX_DATA_0 | MUX_PAD_CTRL(ENET_RX_PAD_CTRL),
+ MX6_PAD_RGMII1_RD1__ENET1_RX_DATA_1 | MUX_PAD_CTRL(ENET_RX_PAD_CTRL),
+ MX6_PAD_RGMII1_TX_CTL__ENET1_TX_EN | MUX_PAD_CTRL(ENET_PAD_CTRL),
+ MX6_PAD_RGMII1_RXC__ENET1_RX_ER | MUX_PAD_CTRL(ENET_RX_PAD_CTRL),
+ MX6_PAD_RGMII1_TD0__ENET1_TX_DATA_0 | MUX_PAD_CTRL(ENET_PAD_CTRL),
+ MX6_PAD_RGMII1_TD1__ENET1_TX_DATA_1 | MUX_PAD_CTRL(ENET_PAD_CTRL),
+ MX6_PAD_ENET1_TX_CLK__ENET1_REF_CLK1 | MUX_PAD_CTRL(ENET_RX_PAD_CTRL),
+ MX6_PAD_ENET2_TX_CLK__GPIO2_IO_9 | MUX_PAD_CTRL(ENET_RX_PAD_CTRL),
+ MX6_PAD_ENET1_CRS__GPIO2_IO_1 | MUX_PAD_CTRL(ENET_PAD_CTRL),
+};
+
+static iomux_v3_cfg_t const phy_control_pads[] = {
+ /* 25MHz Ethernet PHY Clock */
+ MX6_PAD_ENET2_RX_CLK__ENET2_REF_CLK_25M |
+ MUX_PAD_CTRL(ENET_CLK_PAD_CTRL),
+};
+
static iomux_v3_cfg_t const board_recognition_pads[] = {
/*Connected to R184*/
MX6_PAD_NAND_READY_B__GPIO4_IO_13 | BOARD_DETECT_PAD_CFG,
@@ -81,16 +255,6 @@
MX6_PAD_NAND_ALE__GPIO4_IO_0 | BOARD_DETECT_PAD_CFG,
};
-static iomux_v3_cfg_t const usdhc3_pads[] = {
- /* Configured for WLAN */
- MX6_PAD_SD3_CLK__USDHC3_CLK | MUX_PAD_CTRL(USDHC_PAD_CTRL),
- MX6_PAD_SD3_CMD__USDHC3_CMD | MUX_PAD_CTRL(USDHC_PAD_CTRL),
- MX6_PAD_SD3_DATA0__USDHC3_DATA0 | MUX_PAD_CTRL(USDHC_PAD_CTRL),
- MX6_PAD_SD3_DATA1__USDHC3_DATA1 | MUX_PAD_CTRL(USDHC_PAD_CTRL),
- MX6_PAD_SD3_DATA2__USDHC3_DATA2 | MUX_PAD_CTRL(USDHC_PAD_CTRL),
- MX6_PAD_SD3_DATA3__USDHC3_DATA3 | MUX_PAD_CTRL(USDHC_PAD_CTRL),
-};
-
static iomux_v3_cfg_t const wdog_b_pad = {
MX6_PAD_GPIO1_IO13__GPIO1_IO_13 | MUX_PAD_CTRL(WDOG_PAD_CTRL),
};
@@ -104,6 +268,66 @@
imx_iomux_v3_setup_multiple_pads(uart1_pads, ARRAY_SIZE(uart1_pads));
}
+static int setup_fec(int fec_id)
+{
+ struct anatop_regs *anatop = (struct anatop_regs *)ANATOP_BASE_ADDR;
+ int reg;
+
+ imx_iomux_v3_setup_multiple_pads(phy_control_pads,
+ ARRAY_SIZE(phy_control_pads));
+
+ /* Reset PHY */
+ gpio_direction_output(IMX_GPIO_NR(2, 1) , 0);
+ udelay(10000);
+ gpio_set_value(IMX_GPIO_NR(2, 1), 1);
+ udelay(100);
+
+ reg = readl(&anatop->pll_enet);
+ reg |= BM_ANADIG_PLL_ENET_REF_25M_ENABLE;
+ writel(reg, &anatop->pll_enet);
+
+ return enable_fec_anatop_clock(fec_id, ENET_25MHZ);
+}
+
+int board_eth_init(bd_t *bis)
+{
+ uint32_t base = IMX_FEC_BASE;
+ struct mii_dev *bus = NULL;
+ struct phy_device *phydev = NULL;
+ int ret;
+
+ imx_iomux_v3_setup_multiple_pads(fec1_pads, ARRAY_SIZE(fec1_pads));
+
+ setup_fec(CONFIG_FEC_ENET_DEV);
+
+ bus = fec_get_miibus(base, CONFIG_FEC_ENET_DEV);
+ if (!bus)
+ return -EINVAL;
+
+ phydev = phy_find_by_mask(bus, (0x1 << CONFIG_FEC_MXC_PHYADDR),
+ PHY_INTERFACE_MODE_RMII);
+ if (!phydev) {
+ free(bus);
+ return -EINVAL;
+ }
+
+ ret = fec_probe(bis, CONFIG_FEC_ENET_DEV, base, bus, phydev);
+ if (ret) {
+ free(bus);
+ free(phydev);
+ return ret;
+ }
+ return 0;
+}
+
+int board_phy_config(struct phy_device *phydev)
+{
+ if (phydev->drv->config)
+ phydev->drv->config(phydev);
+
+ return 0;
+}
+
int board_init(void)
{
/* Address of boot parameters */
@@ -125,6 +349,10 @@
/* Active high for ncp692 */
gpio_direction_output(IMX_GPIO_NR(4, 16) , 1);
+ #ifdef CONFIG_SYS_I2C_MXC
+ setup_i2c(0, CONFIG_SYS_I2C_SPEED, 0x7f, &i2c_pad_info1);
+ #endif
+
return 0;
}
@@ -171,94 +399,22 @@
int board_mmc_getcd(struct mmc *mmc)
{
- struct fsl_esdhc_cfg *cfg = (struct fsl_esdhc_cfg *)mmc->priv;
- int ret = 0;
-
- switch (cfg->esdhc_base) {
- case USDHC2_BASE_ADDR:
- ret = !gpio_get_value(USDHC2_CD_GPIO);
- break;
- }
-
- return ret;
+ return !gpio_get_value(USDHC2_CD_GPIO);
}
int board_mmc_init(bd_t *bis)
{
-#ifndef CONFIG_SPL_BUILD
- int i, ret;
-
- /*
- * According to the board_mmc_init() the following map is done:
- * (U-boot device node) (Physical Port)
- * mmc0 USDHC2
- */
- for (i = 0; i < CONFIG_SYS_FSL_USDHC_NUM; i++) {
- switch (i) {
- case 0:
- imx_iomux_v3_setup_multiple_pads(
- usdhc2_pads, ARRAY_SIZE(usdhc2_pads));
- usdhc_cfg[0].sdhc_clk = mxc_get_clock(MXC_ESDHC2_CLK);
- gpio_direction_input(USDHC2_CD_GPIO);
- gpio_direction_output(USDHC2_PWR_GPIO, 1);
- break;
- case 1:
- imx_iomux_v3_setup_multiple_pads(
- usdhc3_pads, ARRAY_SIZE(usdhc3_pads));
- usdhc_cfg[1].sdhc_clk = mxc_get_clock(MXC_ESDHC3_CLK);
- break;
- default:
- printf("Warning: you configured more USDHC controllers\
- (%d) than supported by the board\n", i + 1);
- return -EINVAL;
- }
-
- ret = fsl_esdhc_initialize(bis, &usdhc_cfg[i]);
- if (ret) {
- printf("Warning:\
- failed to initialize mmc dev %d\n", i);
- return ret;
- }
- }
-
- return 0;
-#else
- struct src *src_regs = (struct src *)SRC_BASE_ADDR;
- u32 val;
- u32 port;
-
- val = readl(&src_regs->sbmr1);
-
- if ((val & 0xc0) != 0x40) {
- printf("Not boot from USDHC!\n");
- return -EINVAL;
- }
-
- port = (val >> 11) & 0x3;
- printf("port %d\n", port);
- switch (port) {
- case 1:
- imx_iomux_v3_setup_multiple_pads(
- usdhc2_pads, ARRAY_SIZE(usdhc2_pads));
- usdhc_cfg[0].sdhc_clk = mxc_get_clock(MXC_ESDHC2_CLK);
- usdhc_cfg[0].esdhc_base = USDHC2_BASE_ADDR;
- gpio_direction_input(USDHC2_CD_GPIO);
- gpio_direction_output(USDHC2_PWR_GPIO, 1);
- break;
- case 2:
- imx_iomux_v3_setup_multiple_pads(
- usdhc3_pads, ARRAY_SIZE(usdhc3_pads));
- usdhc_cfg[1].sdhc_clk = mxc_get_clock(MXC_ESDHC3_CLK);
- usdhc_cfg[1].esdhc_base = USDHC3_BASE_ADDR;
- break;
- }
+ imx_iomux_v3_setup_multiple_pads(usdhc2_pads, ARRAY_SIZE(usdhc2_pads));
+ usdhc_cfg[0].sdhc_clk = mxc_get_clock(MXC_ESDHC2_CLK);
+ usdhc_cfg[0].esdhc_base = USDHC2_BASE_ADDR;
+ gpio_direction_input(USDHC2_CD_GPIO);
+ gpio_direction_output(USDHC2_PWR_GPIO, 1);
gd->arch.sdhc_clk = usdhc_cfg[0].sdhc_clk;
return fsl_esdhc_initialize(bis, &usdhc_cfg[0]);
-#endif
}
-char *board_string(void)
+static char *board_string(void)
{
switch (get_board_value()) {
case UDOO_NEO_TYPE_BASIC:
diff --git a/board/xilinx/zynq/board.c b/board/xilinx/zynq/board.c
index 2c86940..5cd9bbf 100644
--- a/board/xilinx/zynq/board.c
+++ b/board/xilinx/zynq/board.c
@@ -124,121 +124,15 @@
}
#if !defined(CONFIG_SYS_SDRAM_BASE) && !defined(CONFIG_SYS_SDRAM_SIZE)
-/*
- * fdt_get_reg - Fill buffer by information from DT
- */
-static phys_size_t fdt_get_reg(const void *fdt, int nodeoffset, void *buf,
- const u32 *cell, int n)
-{
- int i = 0, b, banks;
- int parent_offset = fdt_parent_offset(fdt, nodeoffset);
- int address_cells = fdt_address_cells(fdt, parent_offset);
- int size_cells = fdt_size_cells(fdt, parent_offset);
- char *p = buf;
- u64 val;
- u64 vals;
-
- debug("%s: addr_cells=%x, size_cell=%x, buf=%p, cell=%p\n",
- __func__, address_cells, size_cells, buf, cell);
-
- /* Check memory bank setup */
- banks = n % (address_cells + size_cells);
- if (banks)
- panic("Incorrect memory setup cells=%d, ac=%d, sc=%d\n",
- n, address_cells, size_cells);
-
- banks = n / (address_cells + size_cells);
-
- for (b = 0; b < banks; b++) {
- debug("%s: Bank #%d:\n", __func__, b);
- if (address_cells == 2) {
- val = cell[i + 1];
- val <<= 32;
- val |= cell[i];
- val = fdt64_to_cpu(val);
- debug("%s: addr64=%llx, ptr=%p, cell=%p\n",
- __func__, val, p, &cell[i]);
- *(phys_addr_t *)p = val;
- } else {
- debug("%s: addr32=%x, ptr=%p\n",
- __func__, fdt32_to_cpu(cell[i]), p);
- *(phys_addr_t *)p = fdt32_to_cpu(cell[i]);
- }
- p += sizeof(phys_addr_t);
- i += address_cells;
-
- debug("%s: pa=%p, i=%x, size=%zu\n", __func__, p, i,
- sizeof(phys_addr_t));
-
- if (size_cells == 2) {
- vals = cell[i + 1];
- vals <<= 32;
- vals |= cell[i];
- vals = fdt64_to_cpu(vals);
-
- debug("%s: size64=%llx, ptr=%p, cell=%p\n",
- __func__, vals, p, &cell[i]);
- *(phys_size_t *)p = vals;
- } else {
- debug("%s: size32=%x, ptr=%p\n",
- __func__, fdt32_to_cpu(cell[i]), p);
- *(phys_size_t *)p = fdt32_to_cpu(cell[i]);
- }
- p += sizeof(phys_size_t);
- i += size_cells;
-
- debug("%s: ps=%p, i=%x, size=%zu\n",
- __func__, p, i, sizeof(phys_size_t));
- }
-
- /* Return the first address size */
- return *(phys_size_t *)((char *)buf + sizeof(phys_addr_t));
-}
-
-#define FDT_REG_SIZE sizeof(u32)
-/* Temp location for sharing data for storing */
-/* Up to 64-bit address + 64-bit size */
-static u8 tmp[CONFIG_NR_DRAM_BANKS * 16];
-
void dram_init_banksize(void)
{
- int bank;
-
- memcpy(&gd->bd->bi_dram[0], &tmp, sizeof(tmp));
-
- for (bank = 0; bank < CONFIG_NR_DRAM_BANKS; bank++) {
- debug("Bank #%d: start %llx\n", bank,
- (unsigned long long)gd->bd->bi_dram[bank].start);
- debug("Bank #%d: size %llx\n", bank,
- (unsigned long long)gd->bd->bi_dram[bank].size);
- }
+ fdtdec_setup_memory_banksize();
}
int dram_init(void)
{
- int node, len;
- const void *blob = gd->fdt_blob;
- const u32 *cell;
-
- memset(&tmp, 0, sizeof(tmp));
-
- /* find or create "/memory" node. */
- node = fdt_subnode_offset(blob, 0, "memory");
- if (node < 0) {
- printf("%s: Can't get memory node\n", __func__);
- return node;
- }
-
- /* Get pointer to cells and lenght of it */
- cell = fdt_getprop(blob, node, "reg", &len);
- if (!cell) {
- printf("%s: Can't get reg property\n", __func__);
- return -1;
- }
-
- gd->ram_size = fdt_get_reg(blob, node, &tmp, cell, len / FDT_REG_SIZE);
-
- debug("%s: Initial DRAM size %llx\n", __func__, (u64)gd->ram_size);
+ if (fdtdec_setup_memory_size() != 0)
+ return -EINVAL;
zynq_ddrc_init();
diff --git a/board/xilinx/zynqmp/zynqmp.c b/board/xilinx/zynqmp/zynqmp.c
index cef1f6a..4e5871b 100644
--- a/board/xilinx/zynqmp/zynqmp.c
+++ b/board/xilinx/zynqmp/zynqmp.c
@@ -180,121 +180,15 @@
}
#if !defined(CONFIG_SYS_SDRAM_BASE) && !defined(CONFIG_SYS_SDRAM_SIZE)
-/*
- * fdt_get_reg - Fill buffer by information from DT
- */
-static phys_size_t fdt_get_reg(const void *fdt, int nodeoffset, void *buf,
- const u32 *cell, int n)
-{
- int i = 0, b, banks;
- int parent_offset = fdt_parent_offset(fdt, nodeoffset);
- int address_cells = fdt_address_cells(fdt, parent_offset);
- int size_cells = fdt_size_cells(fdt, parent_offset);
- char *p = buf;
- u64 val;
- u64 vals;
-
- debug("%s: addr_cells=%x, size_cell=%x, buf=%p, cell=%p\n",
- __func__, address_cells, size_cells, buf, cell);
-
- /* Check memory bank setup */
- banks = n % (address_cells + size_cells);
- if (banks)
- panic("Incorrect memory setup cells=%d, ac=%d, sc=%d\n",
- n, address_cells, size_cells);
-
- banks = n / (address_cells + size_cells);
-
- for (b = 0; b < banks; b++) {
- debug("%s: Bank #%d:\n", __func__, b);
- if (address_cells == 2) {
- val = cell[i + 1];
- val <<= 32;
- val |= cell[i];
- val = fdt64_to_cpu(val);
- debug("%s: addr64=%llx, ptr=%p, cell=%p\n",
- __func__, val, p, &cell[i]);
- *(phys_addr_t *)p = val;
- } else {
- debug("%s: addr32=%x, ptr=%p\n",
- __func__, fdt32_to_cpu(cell[i]), p);
- *(phys_addr_t *)p = fdt32_to_cpu(cell[i]);
- }
- p += sizeof(phys_addr_t);
- i += address_cells;
-
- debug("%s: pa=%p, i=%x, size=%zu\n", __func__, p, i,
- sizeof(phys_addr_t));
-
- if (size_cells == 2) {
- vals = cell[i + 1];
- vals <<= 32;
- vals |= cell[i];
- vals = fdt64_to_cpu(vals);
-
- debug("%s: size64=%llx, ptr=%p, cell=%p\n",
- __func__, vals, p, &cell[i]);
- *(phys_size_t *)p = vals;
- } else {
- debug("%s: size32=%x, ptr=%p\n",
- __func__, fdt32_to_cpu(cell[i]), p);
- *(phys_size_t *)p = fdt32_to_cpu(cell[i]);
- }
- p += sizeof(phys_size_t);
- i += size_cells;
-
- debug("%s: ps=%p, i=%x, size=%zu\n",
- __func__, p, i, sizeof(phys_size_t));
- }
-
- /* Return the first address size */
- return *(phys_size_t *)((char *)buf + sizeof(phys_addr_t));
-}
-
-#define FDT_REG_SIZE sizeof(u32)
-/* Temp location for sharing data for storing */
-/* Up to 64-bit address + 64-bit size */
-static u8 tmp[CONFIG_NR_DRAM_BANKS * 16];
-
void dram_init_banksize(void)
{
- int bank;
-
- memcpy(&gd->bd->bi_dram[0], &tmp, sizeof(tmp));
-
- for (bank = 0; bank < CONFIG_NR_DRAM_BANKS; bank++) {
- debug("Bank #%d: start %llx\n", bank,
- (unsigned long long)gd->bd->bi_dram[bank].start);
- debug("Bank #%d: size %llx\n", bank,
- (unsigned long long)gd->bd->bi_dram[bank].size);
- }
+ fdtdec_setup_memory_banksize();
}
int dram_init(void)
{
- int node, len;
- const void *blob = gd->fdt_blob;
- const u32 *cell;
-
- memset(&tmp, 0, sizeof(tmp));
-
- /* find or create "/memory" node. */
- node = fdt_subnode_offset(blob, 0, "memory");
- if (node < 0) {
- printf("%s: Can't get memory node\n", __func__);
- return node;
- }
-
- /* Get pointer to cells and lenght of it */
- cell = fdt_getprop(blob, node, "reg", &len);
- if (!cell) {
- printf("%s: Can't get reg property\n", __func__);
- return -1;
- }
-
- gd->ram_size = fdt_get_reg(blob, node, &tmp, cell, len / FDT_REG_SIZE);
-
- debug("%s: Initial DRAM size %llx\n", __func__, (u64)gd->ram_size);
+ if (fdtdec_setup_memory_size() != 0)
+ return -EINVAL;
return 0;
}
@@ -309,18 +203,7 @@
void reset_cpu(ulong addr)
{
-}
-
-#ifdef CONFIG_SCSI_AHCI_PLAT
-void scsi_init(void)
-{
-#if defined(CONFIG_SATA_CEVA)
- init_sata(0);
-#endif
- ahci_init((void __iomem *)ZYNQMP_SATA_BASEADDR);
- scsi_scan(1);
}
-#endif
int board_late_init(void)
{
diff --git a/common/board_r.c b/common/board_r.c
index 5496f45..a373352 100644
--- a/common/board_r.c
+++ b/common/board_r.c
@@ -620,7 +620,7 @@
}
#endif
-#if defined(CONFIG_SCSI)
+#if defined(CONFIG_SCSI) && !defined(CONFIG_DM_SCSI)
static int initr_scsi(void)
{
puts("SCSI: ");
@@ -923,7 +923,7 @@
initr_ambapp_print,
#endif
#endif
-#ifdef CONFIG_SCSI
+#if defined(CONFIG_SCSI) && !defined(CONFIG_DM_SCSI)
INIT_FUNC_WATCHDOG_RESET
initr_scsi,
#endif
diff --git a/common/image.c b/common/image.c
index bd07e86..909dbed 100644
--- a/common/image.c
+++ b/common/image.c
@@ -1375,11 +1375,10 @@
img_len, BIT_PARTIAL);
}
- printf(" Programming %s bitstream... ", name);
if (err)
- printf("failed\n");
- else
- printf("OK\n");
+ return err;
+
+ printf(" Programming %s bitstream... OK\n", name);
break;
default:
printf("The given image format is not supported (corrupt?)\n");
diff --git a/common/miiphyutil.c b/common/miiphyutil.c
index aca18db..8eb0f76 100644
--- a/common/miiphyutil.c
+++ b/common/miiphyutil.c
@@ -107,6 +107,18 @@
return 0;
}
+int mdio_register_seq(struct mii_dev *bus, int seq)
+{
+ int ret;
+
+ /* Setup a unique name for each mdio bus */
+ ret = snprintf(bus->name, MDIO_NAME_LEN, "eth%d", seq);
+ if (ret < 0)
+ return ret;
+
+ return mdio_register(bus);
+}
+
int mdio_unregister(struct mii_dev *bus)
{
if (!bus)
diff --git a/common/scsi.c b/common/scsi.c
index 04add62..e7efa5a 100644
--- a/common/scsi.c
+++ b/common/scsi.c
@@ -10,7 +10,10 @@
#include <inttypes.h>
#include <pci.h>
#include <scsi.h>
+#include <dm/device-internal.h>
+#include <dm/uclass-internal.h>
+#if !defined(CONFIG_DM_SCSI)
#ifdef CONFIG_SCSI_DEV_LIST
#define SCSI_DEV_LIST CONFIG_SCSI_DEV_LIST
#else
@@ -31,6 +34,7 @@
#endif
#define SCSI_DEV_LIST {SCSI_VEND_ID, SCSI_DEV_ID}
#endif
+#endif
#if defined(CONFIG_PCI) && !defined(CONFIG_SCSI_AHCI_PLAT)
const struct pci_device_id scsi_device_list[] = { SCSI_DEV_LIST };
@@ -39,11 +43,13 @@
static unsigned char tempbuff[512]; /* temporary data buffer */
+#if !defined(CONFIG_DM_SCSI)
static int scsi_max_devs; /* number of highest available scsi device */
static int scsi_curr_dev; /* current device */
static struct blk_desc scsi_dev_desc[CONFIG_SYS_SCSI_MAX_DEVICE];
+#endif
/* almost the maximum amount of the scsi_ext command.. */
#define SCSI_MAX_READ_BLK 0xFFFF
@@ -444,6 +450,7 @@
#endif
}
+#if !defined(CONFIG_DM_SCSI)
/**
* scsi_init_dev_desc - initialize all SCSI specific blk_desc properties
*
@@ -460,6 +467,7 @@
scsi_init_dev_desc_priv(dev_desc);
}
+#endif
/**
* scsi_detect_dev - Detect scsi device
@@ -540,13 +548,80 @@
* (re)-scan the scsi bus and reports scsi device info
* to the user if mode = 1
*/
+#if defined(CONFIG_DM_SCSI)
int scsi_scan(int mode)
{
unsigned char i, lun;
+ struct uclass *uc;
+ struct udevice *dev; /* SCSI controller */
int ret;
if (mode == 1)
printf("scanning bus for devices...\n");
+
+ ret = uclass_get(UCLASS_SCSI, &uc);
+ if (ret)
+ return ret;
+
+ uclass_foreach_dev(dev, uc) {
+ struct scsi_platdata *plat; /* scsi controller platdata */
+
+ /* probe SCSI controller driver */
+ ret = device_probe(dev);
+ if (ret)
+ return ret;
+
+ /* Get controller platdata */
+ plat = dev_get_platdata(dev);
+
+ for (i = 0; i < plat->max_id; i++) {
+ for (lun = 0; lun < plat->max_lun; lun++) {
+ struct udevice *bdev; /* block device */
+ /* block device description */
+ struct blk_desc *bdesc;
+ char str[10];
+
+ /*
+ * Create only one block device and do detection
+ * to make sure that there won't be a lot of
+ * block devices created
+ */
+ snprintf(str, sizeof(str), "id%dlun%d", i, lun);
+ ret = blk_create_devicef(dev, "scsi_blk",
+ str, IF_TYPE_SCSI,
+ -1, 0, 0, &bdev);
+ if (ret) {
+ debug("Can't create device\n");
+ return ret;
+ }
+ bdesc = dev_get_uclass_platdata(bdev);
+
+ scsi_init_dev_desc_priv(bdesc);
+ bdesc->lun = lun;
+ ret = scsi_detect_dev(i, bdesc);
+ if (ret) {
+ device_unbind(bdev);
+ continue;
+ }
+
+ if (mode == 1) {
+ printf(" Device %d: ", 0);
+ dev_print(bdesc);
+ } /* if mode */
+ } /* next LUN */
+ }
+ }
+
+ return 0;
+}
+#else
+int scsi_scan(int mode)
+{
+ unsigned char i, lun;
+ int ret;
+
+ if (mode == 1)
+ printf("scanning bus for devices...\n");
for (i = 0; i < CONFIG_SYS_SCSI_MAX_DEVICE; i++)
scsi_init_dev_desc(&scsi_dev_desc[i], i);
@@ -576,6 +651,7 @@
#endif
return 0;
}
+#endif
#ifdef CONFIG_BLK
static const struct blk_ops scsi_blk_ops = {
diff --git a/configs/apalis_imx6_defconfig b/configs/apalis_imx6_defconfig
new file mode 100644
index 0000000..80c69ea
--- /dev/null
+++ b/configs/apalis_imx6_defconfig
@@ -0,0 +1,52 @@
+CONFIG_ARM=y
+CONFIG_ARCH_MX6=y
+CONFIG_SPL_GPIO_SUPPORT=y
+CONFIG_SPL_LIBCOMMON_SUPPORT=y
+CONFIG_SPL_LIBGENERIC_SUPPORT=y
+CONFIG_TARGET_APALIS_IMX6=y
+CONFIG_SPL_I2C_SUPPORT=y
+CONFIG_SPL_MMC_SUPPORT=y
+CONFIG_SPL_SERIAL_SUPPORT=y
+CONFIG_VIDEO=y
+CONFIG_SYS_EXTRA_OPTIONS="IMX_CONFIG=arch/arm/imx-common/spl_sd.cfg,MX6Q"
+CONFIG_BOOTDELAY=1
+# CONFIG_CONSOLE_MUX is not set
+# CONFIG_DISPLAY_BOARDINFO is not set
+CONFIG_SPL=y
+CONFIG_SPL_DMA_SUPPORT=y
+CONFIG_HUSH_PARSER=y
+CONFIG_SYS_PROMPT="Apalis iMX6 # "
+CONFIG_CMD_BOOTZ=y
+# CONFIG_CMD_ELF is not set
+# CONFIG_CMD_IMI is not set
+# CONFIG_CMD_IMLS is not set
+# CONFIG_CMD_XIMG is not set
+CONFIG_CMD_ASKENV=y
+CONFIG_CMD_MEMTEST=y
+CONFIG_CMD_MMC=y
+CONFIG_CMD_I2C=y
+CONFIG_CMD_USB=y
+CONFIG_CMD_DFU=y
+CONFIG_CMD_USB_MASS_STORAGE=y
+# CONFIG_CMD_FPGA is not set
+CONFIG_CMD_GPIO=y
+CONFIG_CMD_DHCP=y
+CONFIG_CMD_MII=y
+CONFIG_CMD_PING=y
+CONFIG_CMD_CACHE=y
+CONFIG_CMD_EXT4=y
+CONFIG_CMD_FAT=y
+CONFIG_CMD_FS_GENERIC=y
+CONFIG_DM=y
+CONFIG_DM_THERMAL=y
+CONFIG_USB=y
+CONFIG_USB_EHCI_HCD=y
+CONFIG_USB_STORAGE=y
+CONFIG_USB_GADGET=y
+CONFIG_CI_UDC=y
+CONFIG_USB_GADGET_DOWNLOAD=y
+CONFIG_G_DNL_MANUFACTURER="Toradex"
+CONFIG_G_DNL_VENDOR_NUM=0x1b67
+CONFIG_G_DNL_PRODUCT_NUM=0x4020
+CONFIG_OF_LIBFDT=y
+# CONFIG_EFI_LOADER is not set
diff --git a/configs/apalis_imx6_nospl_com_defconfig b/configs/apalis_imx6_nospl_com_defconfig
new file mode 100644
index 0000000..4276c6a
--- /dev/null
+++ b/configs/apalis_imx6_nospl_com_defconfig
@@ -0,0 +1,42 @@
+CONFIG_ARM=y
+CONFIG_ARCH_MX6=y
+CONFIG_TARGET_APALIS_IMX6=y
+CONFIG_VIDEO=y
+CONFIG_SYS_EXTRA_OPTIONS="IMX_CONFIG=board/toradex/apalis_imx6/apalis_imx6q.cfg,MX6Q,DDR_MB=1024"
+CONFIG_BOOTDELAY=1
+# CONFIG_CONSOLE_MUX is not set
+# CONFIG_DISPLAY_BOARDINFO is not set
+CONFIG_HUSH_PARSER=y
+CONFIG_SYS_PROMPT="Apalis iMX6 # "
+CONFIG_CMD_BOOTZ=y
+# CONFIG_CMD_ELF is not set
+# CONFIG_CMD_IMI is not set
+# CONFIG_CMD_IMLS is not set
+# CONFIG_CMD_XIMG is not set
+CONFIG_CMD_ASKENV=y
+CONFIG_CMD_MEMTEST=y
+CONFIG_CMD_MMC=y
+CONFIG_CMD_I2C=y
+CONFIG_CMD_USB=y
+CONFIG_CMD_DFU=y
+CONFIG_CMD_USB_MASS_STORAGE=y
+# CONFIG_CMD_FPGA is not set
+CONFIG_CMD_GPIO=y
+CONFIG_CMD_DHCP=y
+CONFIG_CMD_MII=y
+CONFIG_CMD_PING=y
+CONFIG_CMD_CACHE=y
+CONFIG_CMD_EXT4=y
+CONFIG_CMD_FAT=y
+CONFIG_CMD_FS_GENERIC=y
+CONFIG_USB=y
+CONFIG_USB_EHCI_HCD=y
+CONFIG_USB_STORAGE=y
+CONFIG_USB_GADGET=y
+CONFIG_CI_UDC=y
+CONFIG_USB_GADGET_DOWNLOAD=y
+CONFIG_G_DNL_MANUFACTURER="Toradex"
+CONFIG_G_DNL_VENDOR_NUM=0x1b67
+CONFIG_G_DNL_PRODUCT_NUM=0x4020
+CONFIG_OF_LIBFDT=y
+# CONFIG_EFI_LOADER is not set
diff --git a/configs/apalis_imx6_nospl_it_defconfig b/configs/apalis_imx6_nospl_it_defconfig
new file mode 100644
index 0000000..d246722
--- /dev/null
+++ b/configs/apalis_imx6_nospl_it_defconfig
@@ -0,0 +1,44 @@
+CONFIG_ARM=y
+CONFIG_ARCH_MX6=y
+CONFIG_TARGET_APALIS_IMX6=y
+CONFIG_VIDEO=y
+CONFIG_SYS_EXTRA_OPTIONS="IMX_CONFIG=board/toradex/apalis_imx6/apalis_imx6q.cfg,MX6Q,DDR_MB=2048"
+CONFIG_BOOTDELAY=1
+# CONFIG_CONSOLE_MUX is not set
+# CONFIG_DISPLAY_BOARDINFO is not set
+CONFIG_HUSH_PARSER=y
+CONFIG_SYS_PROMPT="Apalis iMX6 # "
+CONFIG_CMD_BOOTZ=y
+# CONFIG_CMD_ELF is not set
+# CONFIG_CMD_IMI is not set
+# CONFIG_CMD_IMLS is not set
+# CONFIG_CMD_XIMG is not set
+CONFIG_CMD_ASKENV=y
+CONFIG_CMD_MEMTEST=y
+CONFIG_CMD_MMC=y
+CONFIG_CMD_I2C=y
+CONFIG_CMD_USB=y
+CONFIG_CMD_DFU=y
+CONFIG_CMD_USB_MASS_STORAGE=y
+# CONFIG_CMD_FPGA is not set
+CONFIG_CMD_GPIO=y
+CONFIG_CMD_DHCP=y
+CONFIG_CMD_MII=y
+CONFIG_CMD_PING=y
+CONFIG_CMD_CACHE=y
+CONFIG_CMD_EXT4=y
+CONFIG_CMD_FAT=y
+CONFIG_CMD_FS_GENERIC=y
+CONFIG_DM=y
+CONFIG_DM_THERMAL=y
+CONFIG_USB=y
+CONFIG_USB_EHCI_HCD=y
+CONFIG_USB_STORAGE=y
+CONFIG_USB_GADGET=y
+CONFIG_CI_UDC=y
+CONFIG_USB_GADGET_DOWNLOAD=y
+CONFIG_G_DNL_MANUFACTURER="Toradex"
+CONFIG_G_DNL_VENDOR_NUM=0x1b67
+CONFIG_G_DNL_PRODUCT_NUM=0x4020
+CONFIG_OF_LIBFDT=y
+# CONFIG_EFI_LOADER is not set
diff --git a/configs/colibri_imx6_defconfig b/configs/colibri_imx6_defconfig
new file mode 100644
index 0000000..f14f701
--- /dev/null
+++ b/configs/colibri_imx6_defconfig
@@ -0,0 +1,50 @@
+CONFIG_ARM=y
+CONFIG_ARCH_MX6=y
+CONFIG_SPL_GPIO_SUPPORT=y
+CONFIG_SPL_LIBCOMMON_SUPPORT=y
+CONFIG_SPL_LIBGENERIC_SUPPORT=y
+CONFIG_TARGET_COLIBRI_IMX6=y
+CONFIG_SPL_I2C_SUPPORT=y
+CONFIG_SPL_MMC_SUPPORT=y
+CONFIG_SPL_SERIAL_SUPPORT=y
+CONFIG_VIDEO=y
+CONFIG_SYS_EXTRA_OPTIONS="IMX_CONFIG=arch/arm/imx-common/spl_sd.cfg,MX6DL"
+CONFIG_BOOTDELAY=1
+# CONFIG_CONSOLE_MUX is not set
+# CONFIG_DISPLAY_BOARDINFO is not set
+CONFIG_SPL=y
+CONFIG_SPL_DMA_SUPPORT=y
+CONFIG_HUSH_PARSER=y
+CONFIG_SYS_PROMPT="Colibri iMX6 # "
+CONFIG_CMD_BOOTZ=y
+# CONFIG_CMD_ELF is not set
+# CONFIG_CMD_IMI is not set
+# CONFIG_CMD_IMLS is not set
+# CONFIG_CMD_XIMG is not set
+CONFIG_CMD_ASKENV=y
+CONFIG_CMD_MEMTEST=y
+CONFIG_CMD_MMC=y
+CONFIG_CMD_I2C=y
+CONFIG_CMD_USB=y
+CONFIG_CMD_DFU=y
+CONFIG_CMD_USB_MASS_STORAGE=y
+# CONFIG_CMD_FPGA is not set
+CONFIG_CMD_GPIO=y
+CONFIG_CMD_DHCP=y
+CONFIG_CMD_MII=y
+CONFIG_CMD_PING=y
+CONFIG_CMD_CACHE=y
+CONFIG_CMD_EXT4=y
+CONFIG_CMD_FAT=y
+CONFIG_CMD_FS_GENERIC=y
+CONFIG_USB=y
+CONFIG_USB_EHCI_HCD=y
+CONFIG_USB_STORAGE=y
+CONFIG_USB_GADGET=y
+CONFIG_CI_UDC=y
+CONFIG_USB_GADGET_DOWNLOAD=y
+CONFIG_G_DNL_MANUFACTURER="Toradex"
+CONFIG_G_DNL_VENDOR_NUM=0x1b67
+CONFIG_G_DNL_PRODUCT_NUM=0x4020
+CONFIG_OF_LIBFDT=y
+# CONFIG_EFI_LOADER is not set
diff --git a/configs/colibri_imx6_nospl_defconfig b/configs/colibri_imx6_nospl_defconfig
new file mode 100644
index 0000000..a5cf60b
--- /dev/null
+++ b/configs/colibri_imx6_nospl_defconfig
@@ -0,0 +1,44 @@
+CONFIG_ARM=y
+CONFIG_ARCH_MX6=y
+CONFIG_TARGET_COLIBRI_IMX6=y
+CONFIG_VIDEO=y
+CONFIG_SYS_EXTRA_OPTIONS="IMX_CONFIG=board/toradex/colibri_imx6/colibri_imx6.cfg,MX6DL,DDR_MB=256"
+CONFIG_BOOTDELAY=1
+# CONFIG_CONSOLE_MUX is not set
+# CONFIG_DISPLAY_BOARDINFO is not set
+CONFIG_HUSH_PARSER=y
+CONFIG_SYS_PROMPT="Colibri iMX6 # "
+CONFIG_CMD_BOOTZ=y
+# CONFIG_CMD_ELF is not set
+# CONFIG_CMD_IMI is not set
+# CONFIG_CMD_IMLS is not set
+# CONFIG_CMD_XIMG is not set
+CONFIG_CMD_ASKENV=y
+CONFIG_CMD_MEMTEST=y
+CONFIG_CMD_MMC=y
+CONFIG_CMD_I2C=y
+CONFIG_CMD_USB=y
+CONFIG_CMD_DFU=y
+CONFIG_CMD_USB_MASS_STORAGE=y
+# CONFIG_CMD_FPGA is not set
+CONFIG_CMD_GPIO=y
+CONFIG_CMD_DHCP=y
+CONFIG_CMD_MII=y
+CONFIG_CMD_PING=y
+CONFIG_CMD_CACHE=y
+CONFIG_CMD_EXT4=y
+CONFIG_CMD_FAT=y
+CONFIG_CMD_FS_GENERIC=y
+CONFIG_DM=y
+CONFIG_DM_THERMAL=y
+CONFIG_USB=y
+CONFIG_USB_EHCI_HCD=y
+CONFIG_USB_STORAGE=y
+CONFIG_USB_GADGET=y
+CONFIG_CI_UDC=y
+CONFIG_USB_GADGET_DOWNLOAD=y
+CONFIG_G_DNL_MANUFACTURER="Toradex"
+CONFIG_G_DNL_VENDOR_NUM=0x1b67
+CONFIG_G_DNL_PRODUCT_NUM=0x4020
+CONFIG_OF_LIBFDT=y
+# CONFIG_EFI_LOADER is not set
diff --git a/configs/imx6qdl_icore_mmc_defconfig b/configs/imx6dl_icore_mmc_defconfig
similarity index 90%
rename from configs/imx6qdl_icore_mmc_defconfig
rename to configs/imx6dl_icore_mmc_defconfig
index fcf4934..5f09425 100644
--- a/configs/imx6qdl_icore_mmc_defconfig
+++ b/configs/imx6dl_icore_mmc_defconfig
@@ -17,6 +17,7 @@
# CONFIG_DM_MMC_OPS is not set
CONFIG_CMD_BOOTZ=y
CONFIG_CMD_GPIO=y
+CONFIG_CMD_I2C=y
CONFIG_CMD_MII=y
CONFIG_CMD_PING=y
CONFIG_CMD_MEMTEST=y
@@ -30,15 +31,17 @@
CONFIG_OF_LIBFDT=y
CONFIG_FEC_MXC=y
CONFIG_MXC_UART=y
-CONFIG_NETDEVICES=y
CONFIG_IMX_THERMAL=y
CONFIG_PINCTRL=y
CONFIG_PINCTRL_IMX6=y
+CONFIG_SYS_I2C_MXC=y
+CONFIG_VIDEO=y
+CONFIG_VIDEO_IPUV3=y
+CONFIG_SYS_CONSOLE_IS_IN_ENV=y
CONFIG_SPL_LIBDISK_SUPPORT=y
CONFIG_SPL_LIBCOMMON_SUPPORT=y
CONFIG_SPL_LIBGENERIC_SUPPORT=y
CONFIG_SPL_SERIAL_SUPPORT=y
-CONFIG_SPL_I2C_SUPPORT=y
CONFIG_SPL_GPIO_SUPPORT=y
CONFIG_SPL_WATCHDOG_SUPPORT=y
CONFIG_SPL_EXT_SUPPORT=y
diff --git a/configs/imx6qdl_icore_nand_defconfig b/configs/imx6dl_icore_nand_defconfig
similarity index 89%
rename from configs/imx6qdl_icore_nand_defconfig
rename to configs/imx6dl_icore_nand_defconfig
index 4919d44..af3a9f8 100644
--- a/configs/imx6qdl_icore_nand_defconfig
+++ b/configs/imx6dl_icore_nand_defconfig
@@ -15,6 +15,7 @@
# CONFIG_CMD_IMLS is not set
CONFIG_CMD_BOOTZ=y
CONFIG_CMD_GPIO=y
+CONFIG_CMD_I2C=y
CONFIG_CMD_MII=y
CONFIG_CMD_PING=y
CONFIG_CMD_MEMTEST=y
@@ -24,16 +25,18 @@
CONFIG_FEC_MXC=y
CONFIG_MXC_UART=y
CONFIG_NAND_MXS=y
-CONFIG_NETDEVICES=y
CONFIG_IMX_THERMAL=y
# CONFIG_BLK is not set
# CONFIG_DM_MMC_OPS is not set
CONFIG_PINCTRL=y
CONFIG_PINCTRL_IMX6=y
+CONFIG_SYS_I2C_MXC=y
+CONFIG_VIDEO=y
+CONFIG_VIDEO_IPUV3=y
+CONFIG_SYS_CONSOLE_IS_IN_ENV=y
CONFIG_SPL_LIBCOMMON_SUPPORT=y
CONFIG_SPL_LIBGENERIC_SUPPORT=y
CONFIG_SPL_SERIAL_SUPPORT=y
-CONFIG_SPL_I2C_SUPPORT=y
CONFIG_SPL_GPIO_SUPPORT=y
CONFIG_SPL_WATCHDOG_SUPPORT=y
CONFIG_SPL_DMA_SUPPORT=y
diff --git a/configs/imx6qdl_icore_mmc_defconfig b/configs/imx6dl_icore_rqs_mmc_defconfig
similarity index 80%
copy from configs/imx6qdl_icore_mmc_defconfig
copy to configs/imx6dl_icore_rqs_mmc_defconfig
index fcf4934..230cd20 100644
--- a/configs/imx6qdl_icore_mmc_defconfig
+++ b/configs/imx6dl_icore_rqs_mmc_defconfig
@@ -1,10 +1,10 @@
CONFIG_ARM=y
CONFIG_ARCH_MX6=y
-CONFIG_TARGET_MX6Q_ICORE=y
+CONFIG_TARGET_MX6Q_ICORE_RQS=y
CONFIG_SYS_EXTRA_OPTIONS="IMX_CONFIG=arch/arm/imx-common/spl_sd.cfg,ENV_IS_IN_MMC"
-CONFIG_DEFAULT_FDT_FILE="imx6dl-icore.dtb"
-CONFIG_DEFAULT_DEVICE_TREE="imx6dl-icore"
-CONFIG_SYS_PROMPT="icorem6qdl> "
+CONFIG_DEFAULT_FDT_FILE="imx6dl-icore-rqs.dtb"
+CONFIG_DEFAULT_DEVICE_TREE="imx6dl-icore-rqs"
+CONFIG_SYS_PROMPT="icorem6qdl-rqs> "
CONFIG_SPL=y
CONFIG_BOOTDELAY=3
CONFIG_BOARD_EARLY_INIT_F=y
@@ -17,9 +17,9 @@
# CONFIG_DM_MMC_OPS is not set
CONFIG_CMD_BOOTZ=y
CONFIG_CMD_GPIO=y
+CONFIG_CMD_MEMTEST=y
CONFIG_CMD_MII=y
CONFIG_CMD_PING=y
-CONFIG_CMD_MEMTEST=y
CONFIG_CMD_MMC=y
CONFIG_CMD_CACHE=y
CONFIG_CMD_EXT2=y
@@ -27,18 +27,17 @@
CONFIG_CMD_EXT4_WRITE=y
CONFIG_CMD_FAT=y
CONFIG_CMD_FS_GENERIC=y
+CONFIG_CMD_I2C=y
CONFIG_OF_LIBFDT=y
CONFIG_FEC_MXC=y
CONFIG_MXC_UART=y
-CONFIG_NETDEVICES=y
-CONFIG_IMX_THERMAL=y
CONFIG_PINCTRL=y
CONFIG_PINCTRL_IMX6=y
+CONFIG_SYS_I2C_MXC=y
CONFIG_SPL_LIBDISK_SUPPORT=y
CONFIG_SPL_LIBCOMMON_SUPPORT=y
CONFIG_SPL_LIBGENERIC_SUPPORT=y
CONFIG_SPL_SERIAL_SUPPORT=y
-CONFIG_SPL_I2C_SUPPORT=y
CONFIG_SPL_GPIO_SUPPORT=y
CONFIG_SPL_WATCHDOG_SUPPORT=y
CONFIG_SPL_EXT_SUPPORT=y
diff --git a/configs/imx6qdl_icore_mmc_defconfig b/configs/imx6q_icore_mmc_defconfig
similarity index 83%
copy from configs/imx6qdl_icore_mmc_defconfig
copy to configs/imx6q_icore_mmc_defconfig
index fcf4934..8f812b4 100644
--- a/configs/imx6qdl_icore_mmc_defconfig
+++ b/configs/imx6q_icore_mmc_defconfig
@@ -2,8 +2,8 @@
CONFIG_ARCH_MX6=y
CONFIG_TARGET_MX6Q_ICORE=y
CONFIG_SYS_EXTRA_OPTIONS="IMX_CONFIG=arch/arm/imx-common/spl_sd.cfg,ENV_IS_IN_MMC"
-CONFIG_DEFAULT_FDT_FILE="imx6dl-icore.dtb"
-CONFIG_DEFAULT_DEVICE_TREE="imx6dl-icore"
+CONFIG_DEFAULT_FDT_FILE="imx6q-icore.dtb"
+CONFIG_DEFAULT_DEVICE_TREE="imx6q-icore"
CONFIG_SYS_PROMPT="icorem6qdl> "
CONFIG_SPL=y
CONFIG_BOOTDELAY=3
@@ -17,6 +17,7 @@
# CONFIG_DM_MMC_OPS is not set
CONFIG_CMD_BOOTZ=y
CONFIG_CMD_GPIO=y
+CONFIG_CMD_I2C=y
CONFIG_CMD_MII=y
CONFIG_CMD_PING=y
CONFIG_CMD_MEMTEST=y
@@ -30,15 +31,17 @@
CONFIG_OF_LIBFDT=y
CONFIG_FEC_MXC=y
CONFIG_MXC_UART=y
-CONFIG_NETDEVICES=y
CONFIG_IMX_THERMAL=y
CONFIG_PINCTRL=y
CONFIG_PINCTRL_IMX6=y
+CONFIG_SYS_I2C_MXC=y
+CONFIG_VIDEO=y
+CONFIG_VIDEO_IPUV3=y
+CONFIG_SYS_CONSOLE_IS_IN_ENV=y
CONFIG_SPL_LIBDISK_SUPPORT=y
CONFIG_SPL_LIBCOMMON_SUPPORT=y
CONFIG_SPL_LIBGENERIC_SUPPORT=y
CONFIG_SPL_SERIAL_SUPPORT=y
-CONFIG_SPL_I2C_SUPPORT=y
CONFIG_SPL_GPIO_SUPPORT=y
CONFIG_SPL_WATCHDOG_SUPPORT=y
CONFIG_SPL_EXT_SUPPORT=y
diff --git a/configs/imx6qdl_icore_nand_defconfig b/configs/imx6q_icore_nand_defconfig
similarity index 81%
copy from configs/imx6qdl_icore_nand_defconfig
copy to configs/imx6q_icore_nand_defconfig
index 4919d44..4735be8 100644
--- a/configs/imx6qdl_icore_nand_defconfig
+++ b/configs/imx6q_icore_nand_defconfig
@@ -2,8 +2,8 @@
CONFIG_ARCH_MX6=y
CONFIG_TARGET_MX6Q_ICORE=y
CONFIG_SYS_EXTRA_OPTIONS="IMX_CONFIG=arch/arm/imx-common/spl_sd.cfg,ENV_IS_IN_NAND"
-CONFIG_DEFAULT_FDT_FILE="imx6dl-icore.dtb"
-CONFIG_DEFAULT_DEVICE_TREE="imx6dl-icore"
+CONFIG_DEFAULT_FDT_FILE="imx6q-icore.dtb"
+CONFIG_DEFAULT_DEVICE_TREE="imx6q-icore"
CONFIG_SYS_PROMPT="icorem6qdl> "
CONFIG_SPL=y
CONFIG_BOOTDELAY=3
@@ -15,6 +15,7 @@
# CONFIG_CMD_IMLS is not set
CONFIG_CMD_BOOTZ=y
CONFIG_CMD_GPIO=y
+CONFIG_CMD_I2C=y
CONFIG_CMD_MII=y
CONFIG_CMD_PING=y
CONFIG_CMD_MEMTEST=y
@@ -24,16 +25,18 @@
CONFIG_FEC_MXC=y
CONFIG_MXC_UART=y
CONFIG_NAND_MXS=y
-CONFIG_NETDEVICES=y
CONFIG_IMX_THERMAL=y
# CONFIG_BLK is not set
# CONFIG_DM_MMC_OPS is not set
CONFIG_PINCTRL=y
CONFIG_PINCTRL_IMX6=y
+CONFIG_SYS_I2C_MXC=y
+CONFIG_VIDEO=y
+CONFIG_VIDEO_IPUV3=y
+CONFIG_SYS_CONSOLE_IS_IN_ENV=y
CONFIG_SPL_LIBCOMMON_SUPPORT=y
CONFIG_SPL_LIBGENERIC_SUPPORT=y
CONFIG_SPL_SERIAL_SUPPORT=y
-CONFIG_SPL_I2C_SUPPORT=y
CONFIG_SPL_GPIO_SUPPORT=y
CONFIG_SPL_WATCHDOG_SUPPORT=y
CONFIG_SPL_DMA_SUPPORT=y
diff --git a/configs/imx6qdl_icore_mmc_defconfig b/configs/imx6q_icore_rqs_mmc_defconfig
similarity index 80%
copy from configs/imx6qdl_icore_mmc_defconfig
copy to configs/imx6q_icore_rqs_mmc_defconfig
index fcf4934..f7c25c4 100644
--- a/configs/imx6qdl_icore_mmc_defconfig
+++ b/configs/imx6q_icore_rqs_mmc_defconfig
@@ -1,10 +1,10 @@
CONFIG_ARM=y
CONFIG_ARCH_MX6=y
-CONFIG_TARGET_MX6Q_ICORE=y
+CONFIG_TARGET_MX6Q_ICORE_RQS=y
CONFIG_SYS_EXTRA_OPTIONS="IMX_CONFIG=arch/arm/imx-common/spl_sd.cfg,ENV_IS_IN_MMC"
-CONFIG_DEFAULT_FDT_FILE="imx6dl-icore.dtb"
-CONFIG_DEFAULT_DEVICE_TREE="imx6dl-icore"
-CONFIG_SYS_PROMPT="icorem6qdl> "
+CONFIG_DEFAULT_FDT_FILE="imx6q-icore-rqs.dtb"
+CONFIG_DEFAULT_DEVICE_TREE="imx6q-icore-rqs"
+CONFIG_SYS_PROMPT="icorem6qdl-rqs> "
CONFIG_SPL=y
CONFIG_BOOTDELAY=3
CONFIG_BOARD_EARLY_INIT_F=y
@@ -17,9 +17,9 @@
# CONFIG_DM_MMC_OPS is not set
CONFIG_CMD_BOOTZ=y
CONFIG_CMD_GPIO=y
+CONFIG_CMD_MEMTEST=y
CONFIG_CMD_MII=y
CONFIG_CMD_PING=y
-CONFIG_CMD_MEMTEST=y
CONFIG_CMD_MMC=y
CONFIG_CMD_CACHE=y
CONFIG_CMD_EXT2=y
@@ -27,18 +27,17 @@
CONFIG_CMD_EXT4_WRITE=y
CONFIG_CMD_FAT=y
CONFIG_CMD_FS_GENERIC=y
+CONFIG_CMD_I2C=y
CONFIG_OF_LIBFDT=y
CONFIG_FEC_MXC=y
CONFIG_MXC_UART=y
-CONFIG_NETDEVICES=y
-CONFIG_IMX_THERMAL=y
CONFIG_PINCTRL=y
CONFIG_PINCTRL_IMX6=y
+CONFIG_SYS_I2C_MXC=y
CONFIG_SPL_LIBDISK_SUPPORT=y
CONFIG_SPL_LIBCOMMON_SUPPORT=y
CONFIG_SPL_LIBGENERIC_SUPPORT=y
CONFIG_SPL_SERIAL_SUPPORT=y
-CONFIG_SPL_I2C_SUPPORT=y
CONFIG_SPL_GPIO_SUPPORT=y
CONFIG_SPL_WATCHDOG_SUPPORT=y
CONFIG_SPL_EXT_SUPPORT=y
diff --git a/configs/imx6qdl_icore_mmc_defconfig b/configs/imx6ul_geam_mmc_defconfig
similarity index 82%
copy from configs/imx6qdl_icore_mmc_defconfig
copy to configs/imx6ul_geam_mmc_defconfig
index fcf4934..d5be076 100644
--- a/configs/imx6qdl_icore_mmc_defconfig
+++ b/configs/imx6ul_geam_mmc_defconfig
@@ -1,10 +1,10 @@
CONFIG_ARM=y
CONFIG_ARCH_MX6=y
-CONFIG_TARGET_MX6Q_ICORE=y
+CONFIG_TARGET_MX6UL_GEAM=y
CONFIG_SYS_EXTRA_OPTIONS="IMX_CONFIG=arch/arm/imx-common/spl_sd.cfg,ENV_IS_IN_MMC"
-CONFIG_DEFAULT_FDT_FILE="imx6dl-icore.dtb"
-CONFIG_DEFAULT_DEVICE_TREE="imx6dl-icore"
-CONFIG_SYS_PROMPT="icorem6qdl> "
+CONFIG_DEFAULT_FDT_FILE="imx6ul-geam-kit.dtb"
+CONFIG_DEFAULT_DEVICE_TREE="imx6ul-geam-kit"
+CONFIG_SYS_PROMPT="geam6ul> "
CONFIG_SPL=y
CONFIG_BOOTDELAY=3
CONFIG_BOARD_EARLY_INIT_F=y
@@ -17,9 +17,9 @@
# CONFIG_DM_MMC_OPS is not set
CONFIG_CMD_BOOTZ=y
CONFIG_CMD_GPIO=y
+CONFIG_CMD_MEMTEST=y
CONFIG_CMD_MII=y
CONFIG_CMD_PING=y
-CONFIG_CMD_MEMTEST=y
CONFIG_CMD_MMC=y
CONFIG_CMD_CACHE=y
CONFIG_CMD_EXT2=y
@@ -27,18 +27,18 @@
CONFIG_CMD_EXT4_WRITE=y
CONFIG_CMD_FAT=y
CONFIG_CMD_FS_GENERIC=y
+CONFIG_CMD_I2C=y
CONFIG_OF_LIBFDT=y
CONFIG_FEC_MXC=y
CONFIG_MXC_UART=y
-CONFIG_NETDEVICES=y
CONFIG_IMX_THERMAL=y
CONFIG_PINCTRL=y
CONFIG_PINCTRL_IMX6=y
+CONFIG_SYS_I2C_MXC=y
CONFIG_SPL_LIBDISK_SUPPORT=y
CONFIG_SPL_LIBCOMMON_SUPPORT=y
CONFIG_SPL_LIBGENERIC_SUPPORT=y
CONFIG_SPL_SERIAL_SUPPORT=y
-CONFIG_SPL_I2C_SUPPORT=y
CONFIG_SPL_GPIO_SUPPORT=y
CONFIG_SPL_WATCHDOG_SUPPORT=y
CONFIG_SPL_EXT_SUPPORT=y
diff --git a/configs/imx6qdl_icore_nand_defconfig b/configs/imx6ul_geam_nand_defconfig
similarity index 80%
copy from configs/imx6qdl_icore_nand_defconfig
copy to configs/imx6ul_geam_nand_defconfig
index 4919d44..cc45602 100644
--- a/configs/imx6qdl_icore_nand_defconfig
+++ b/configs/imx6ul_geam_nand_defconfig
@@ -1,10 +1,10 @@
CONFIG_ARM=y
CONFIG_ARCH_MX6=y
-CONFIG_TARGET_MX6Q_ICORE=y
+CONFIG_TARGET_MX6UL_GEAM=y
CONFIG_SYS_EXTRA_OPTIONS="IMX_CONFIG=arch/arm/imx-common/spl_sd.cfg,ENV_IS_IN_NAND"
-CONFIG_DEFAULT_FDT_FILE="imx6dl-icore.dtb"
-CONFIG_DEFAULT_DEVICE_TREE="imx6dl-icore"
-CONFIG_SYS_PROMPT="icorem6qdl> "
+CONFIG_DEFAULT_FDT_FILE="imx6ul-geam-kit.dtb"
+CONFIG_DEFAULT_DEVICE_TREE="imx6ul-geam-kit"
+CONFIG_SYS_PROMPT="geam6ul> "
CONFIG_SPL=y
CONFIG_BOOTDELAY=3
CONFIG_BOARD_EARLY_INIT_F=y
@@ -13,27 +13,25 @@
CONFIG_AUTO_COMPLETE=y
CONFIG_SYS_MAXARGS=32
# CONFIG_CMD_IMLS is not set
+# CONFIG_BLK is not set
+# CONFIG_DM_MMC_OPS is not set
CONFIG_CMD_BOOTZ=y
CONFIG_CMD_GPIO=y
+CONFIG_CMD_MEMTEST=y
CONFIG_CMD_MII=y
CONFIG_CMD_PING=y
-CONFIG_CMD_MEMTEST=y
CONFIG_CMD_NAND=y
CONFIG_CMD_CACHE=y
CONFIG_OF_LIBFDT=y
CONFIG_FEC_MXC=y
CONFIG_MXC_UART=y
CONFIG_NAND_MXS=y
-CONFIG_NETDEVICES=y
CONFIG_IMX_THERMAL=y
-# CONFIG_BLK is not set
-# CONFIG_DM_MMC_OPS is not set
CONFIG_PINCTRL=y
CONFIG_PINCTRL_IMX6=y
CONFIG_SPL_LIBCOMMON_SUPPORT=y
CONFIG_SPL_LIBGENERIC_SUPPORT=y
CONFIG_SPL_SERIAL_SUPPORT=y
-CONFIG_SPL_I2C_SUPPORT=y
CONFIG_SPL_GPIO_SUPPORT=y
CONFIG_SPL_WATCHDOG_SUPPORT=y
CONFIG_SPL_DMA_SUPPORT=y
diff --git a/configs/liteboard_defconfig b/configs/liteboard_defconfig
new file mode 100644
index 0000000..11c5b35
--- /dev/null
+++ b/configs/liteboard_defconfig
@@ -0,0 +1,29 @@
+CONFIG_ARM=y
+CONFIG_ARCH_MX6=y
+CONFIG_SPL_GPIO_SUPPORT=y
+CONFIG_SPL_LIBCOMMON_SUPPORT=y
+CONFIG_SPL_LIBGENERIC_SUPPORT=y
+CONFIG_TARGET_LITEBOARD=y
+CONFIG_SPL_MMC_SUPPORT=y
+CONFIG_SPL_SERIAL_SUPPORT=y
+CONFIG_SPL_WATCHDOG_SUPPORT=y
+CONFIG_SYS_EXTRA_OPTIONS="IMX_CONFIG=arch/arm/imx-common/spl_sd.cfg"
+CONFIG_BOOTDELAY=1
+CONFIG_DEFAULT_FDT_FILE="imx6ul-liteboard.dtb"
+CONFIG_SPL=y
+CONFIG_HUSH_PARSER=y
+CONFIG_CMD_BOOTZ=y
+# CONFIG_CMD_IMLS is not set
+CONFIG_CMD_MEMTEST=y
+CONFIG_CMD_MMC=y
+CONFIG_CMD_USB=y
+CONFIG_CMD_GPIO=y
+CONFIG_CMD_DHCP=y
+CONFIG_CMD_PING=y
+CONFIG_CMD_CACHE=y
+CONFIG_CMD_EXT2=y
+CONFIG_CMD_EXT4=y
+CONFIG_CMD_EXT4_WRITE=y
+CONFIG_CMD_FAT=y
+CONFIG_CMD_FS_GENERIC=y
+CONFIG_OF_LIBFDT=y
diff --git a/configs/mx53cx9020_defconfig b/configs/mx53cx9020_defconfig
new file mode 100644
index 0000000..6954cf5
--- /dev/null
+++ b/configs/mx53cx9020_defconfig
@@ -0,0 +1,35 @@
+CONFIG_ARM=y
+CONFIG_ARCH_MX5=y
+CONFIG_TARGET_MX53CX9020=y
+CONFIG_DEFAULT_DEVICE_TREE="imx53-cx9020"
+CONFIG_SYS_EXTRA_OPTIONS="IMX_CONFIG=board/beckhoff/mx53cx9020/imximage.cfg"
+CONFIG_BOOTDELAY=1
+CONFIG_HUSH_PARSER=y
+# CONFIG_DM_MMC_OPS is not set
+CONFIG_CMD_BOOTZ=y
+# CONFIG_CMD_IMLS is not set
+CONFIG_CMD_MMC=y
+#CONFIG_CMD_USB=y
+# CONFIG_CMD_SETEXPR is not set
+CONFIG_VIDEO=y
+CONFIG_CMD_DHCP=y
+CONFIG_CMD_MII=y
+CONFIG_CMD_PING=y
+CONFIG_CMD_EXT2=y
+CONFIG_CMD_EXT4=y
+CONFIG_CMD_FAT=y
+CONFIG_CMD_FS_GENERIC=y
+CONFIG_NETDEVICES=y
+CONFIG_FEC_MXC=y
+CONFIG_MXC_UART=y
+CONFIG_OF_CONTROL=y
+CONFIG_FPGA_ALTERA=y
+CONFIG_FPGA_CYCLON2=y
+CONFIG_CMD_FPGA=y
+CONFIG_PINCTRL=y
+CONFIG_PINCTRL_IMX5=y
+# CONFIG_VIDEO_SW_CURSOR is not set
+CONFIG_CFB_CONSOLE=y
+CONFIG_VGA_AS_SINGLE_DEVICE=y
+CONFIG_SYS_CONSOLE_BG_COL=0x00
+CONFIG_SYS_CONSOLE_FG_COL=0xa0
diff --git a/configs/mx6sllevk_defconfig b/configs/mx6sllevk_defconfig
new file mode 100644
index 0000000..8ae049e
--- /dev/null
+++ b/configs/mx6sllevk_defconfig
@@ -0,0 +1,36 @@
+CONFIG_ARM=y
+CONFIG_ARCH_MX6=y
+CONFIG_TARGET_MX6SLLEVK=y
+CONFIG_DEFAULT_DEVICE_TREE="imx6sll-evk"
+CONFIG_SYS_EXTRA_OPTIONS="IMX_CONFIG=board/freescale/mx6sllevk/imximage.cfg"
+CONFIG_BOOTDELAY=3
+CONFIG_HUSH_PARSER=y
+CONFIG_CMD_BOOTZ=y
+# CONFIG_CMD_IMLS is not set
+CONFIG_CMD_MEMTEST=y
+CONFIG_CMD_MMC=y
+CONFIG_CMD_I2C=y
+CONFIG_CMD_GPIO=y
+CONFIG_CMD_DHCP=y
+CONFIG_CMD_PING=y
+CONFIG_CMD_CACHE=y
+CONFIG_CMD_REGULATOR=y
+CONFIG_CMD_EXT2=y
+CONFIG_CMD_EXT4=y
+CONFIG_CMD_EXT4_WRITE=y
+CONFIG_CMD_FAT=y
+CONFIG_CMD_FS_GENERIC=y
+CONFIG_OF_CONTROL=y
+# CONFIG_BLK is not set
+CONFIG_DM_GPIO=y
+CONFIG_DM_I2C=y
+CONFIG_DM_MMC=y
+# CONFIG_DM_MMC_OPS is not set
+CONFIG_PINCTRL=y
+CONFIG_PINCTRL_IMX6=y
+CONFIG_DM_PMIC=y
+CONFIG_DM_PMIC_PFUZE100=y
+CONFIG_DM_REGULATOR=y
+CONFIG_DM_REGULATOR_PFUZE100=y
+CONFIG_DM_REGULATOR_FIXED=y
+CONFIG_DM_REGULATOR_GPIO=y
diff --git a/configs/mx6sllevk_plugin_defconfig b/configs/mx6sllevk_plugin_defconfig
new file mode 100644
index 0000000..e6be979
--- /dev/null
+++ b/configs/mx6sllevk_plugin_defconfig
@@ -0,0 +1,37 @@
+CONFIG_ARM=y
+CONFIG_ARCH_MX6=y
+CONFIG_TARGET_MX6SLLEVK=y
+CONFIG_USE_IMXIMG_PLUGIN=y
+CONFIG_DEFAULT_DEVICE_TREE="imx6sll-evk"
+CONFIG_SYS_EXTRA_OPTIONS="IMX_CONFIG=board/freescale/mx6sllevk/imximage.cfg"
+CONFIG_BOOTDELAY=3
+CONFIG_HUSH_PARSER=y
+CONFIG_CMD_BOOTZ=y
+# CONFIG_CMD_IMLS is not set
+CONFIG_CMD_MEMTEST=y
+CONFIG_CMD_MMC=y
+CONFIG_CMD_I2C=y
+CONFIG_CMD_GPIO=y
+CONFIG_CMD_DHCP=y
+CONFIG_CMD_PING=y
+CONFIG_CMD_CACHE=y
+CONFIG_CMD_REGULATOR=y
+CONFIG_CMD_EXT2=y
+CONFIG_CMD_EXT4=y
+CONFIG_CMD_EXT4_WRITE=y
+CONFIG_CMD_FAT=y
+CONFIG_CMD_FS_GENERIC=y
+CONFIG_OF_CONTROL=y
+# CONFIG_BLK is not set
+CONFIG_DM_GPIO=y
+CONFIG_DM_I2C=y
+CONFIG_DM_MMC=y
+# CONFIG_DM_MMC_OPS is not set
+CONFIG_PINCTRL=y
+CONFIG_PINCTRL_IMX6=y
+CONFIG_DM_PMIC=y
+CONFIG_DM_PMIC_PFUZE100=y
+CONFIG_DM_REGULATOR=y
+CONFIG_DM_REGULATOR_PFUZE100=y
+CONFIG_DM_REGULATOR_FIXED=y
+CONFIG_DM_REGULATOR_GPIO=y
diff --git a/configs/udoo_neo_defconfig b/configs/udoo_neo_defconfig
index 3304afb..5df4ef9 100644
--- a/configs/udoo_neo_defconfig
+++ b/configs/udoo_neo_defconfig
@@ -11,7 +11,7 @@
CONFIG_SPL_ENV_SUPPORT=y
CONFIG_SPL_WATCHDOG_SUPPORT=y
CONFIG_SPL=y
-CONFIG_SYS_EXTRA_OPTIONS="IMX_CONFIG=arch/arm/imx-common/spl_sd.cfg,MX6SX"
+CONFIG_SYS_EXTRA_OPTIONS="IMX_CONFIG=arch/arm/imx-common/spl_sd.cfg"
CONFIG_HUSH_PARSER=y
CONFIG_CMD_BOOTZ=y
# CONFIG_CMD_IMLS is not set
@@ -19,7 +19,7 @@
CONFIG_CMD_MMC=y
CONFIG_CMD_GPIO=y
# CONFIG_CMD_SETEXPR is not set
-# CONFIG_CMD_DHCP=y
+CONFIG_CMD_DHCP=y
CONFIG_CMD_CACHE=y
CONFIG_CMD_TIME=y
CONFIG_CMD_EXT2=y
diff --git a/configs/xilinx_zynqmp_ep_defconfig b/configs/xilinx_zynqmp_ep_defconfig
index f261e22..b223e11 100644
--- a/configs/xilinx_zynqmp_ep_defconfig
+++ b/configs/xilinx_zynqmp_ep_defconfig
@@ -42,6 +42,8 @@
CONFIG_NET_RANDOM_ETHADDR=y
CONFIG_SPL_DM=y
CONFIG_SPL_DM_SEQ_ALIAS=y
+CONFIG_DM_SCSI=y
+CONFIG_SATA_CEVA=y
CONFIG_DFU_RAM=y
CONFIG_FPGA_XILINX=y
CONFIG_FPGA_ZYNQMPPL=y
diff --git a/configs/xilinx_zynqmp_zcu102_defconfig b/configs/xilinx_zynqmp_zcu102_defconfig
index 021e0ff..9f2df49 100644
--- a/configs/xilinx_zynqmp_zcu102_defconfig
+++ b/configs/xilinx_zynqmp_zcu102_defconfig
@@ -34,6 +34,8 @@
CONFIG_NET_RANDOM_ETHADDR=y
CONFIG_SPL_DM=y
CONFIG_SPL_DM_SEQ_ALIAS=y
+CONFIG_DM_SCSI=y
+CONFIG_SATA_CEVA=y
CONFIG_DFU_RAM=y
CONFIG_FPGA_XILINX=y
CONFIG_FPGA_ZYNQMPPL=y
diff --git a/configs/xilinx_zynqmp_zcu102_revB_defconfig b/configs/xilinx_zynqmp_zcu102_revB_defconfig
index 34062bd..b2b1720 100644
--- a/configs/xilinx_zynqmp_zcu102_revB_defconfig
+++ b/configs/xilinx_zynqmp_zcu102_revB_defconfig
@@ -34,6 +34,8 @@
CONFIG_NET_RANDOM_ETHADDR=y
CONFIG_SPL_DM=y
CONFIG_SPL_DM_SEQ_ALIAS=y
+CONFIG_DM_SCSI=y
+CONFIG_SATA_CEVA=y
CONFIG_DFU_RAM=y
CONFIG_FPGA_XILINX=y
CONFIG_FPGA_ZYNQMPPL=y
diff --git a/drivers/block/Kconfig b/drivers/block/Kconfig
index fe5aa07..88e66e2 100644
--- a/drivers/block/Kconfig
+++ b/drivers/block/Kconfig
@@ -19,6 +19,15 @@
operations at present. The block device interface has not been converted
to driver model.
+config DM_SCSI
+ bool "Support SCSI controllers with driver model"
+ depends on BLK
+ help
+ This option enables the SCSI (Small Computer System Interface) uclass
+ which supports SCSI and SATA HDDs. For every device configuration
+ (IDs/LUNs) a block device is created with RAW read/write and
+ filesystem support.
+
config BLOCK_CACHE
bool "Use block device cache"
default n
@@ -27,3 +36,16 @@
This is most useful when accessing filesystems under U-Boot since
it will prevent repeated reads from directory structures and other
filesystem data structures.
+
+menu "SATA/SCSI device support"
+
+config SATA_CEVA
+ bool "Ceva Sata controller"
+ depends on AHCI
+ depends on DM_SCSI
+ help
+ This option enables Ceva Sata controller hard IP available on Xilinx
+ ZynqMP. Support up to 2 external devices. Complient with SATA 3.1 and
+ AHCI 1.3 specifications with hot-plug detect feature.
+
+endmenu
diff --git a/drivers/block/Makefile b/drivers/block/Makefile
index 436b79f..a72feec 100644
--- a/drivers/block/Makefile
+++ b/drivers/block/Makefile
@@ -12,6 +12,7 @@
endif
obj-$(CONFIG_AHCI) += ahci-uclass.o
+obj-$(CONFIG_DM_SCSI) += scsi-uclass.o
obj-$(CONFIG_SCSI_AHCI) += ahci.o
obj-$(CONFIG_DWC_AHSATA) += dwc_ahsata.o
obj-$(CONFIG_FSL_SATA) += fsl_sata.o
diff --git a/drivers/block/ahci.c b/drivers/block/ahci.c
index 5139989..3fa14a7 100644
--- a/drivers/block/ahci.c
+++ b/drivers/block/ahci.c
@@ -168,7 +168,7 @@
static int ahci_host_init(struct ahci_probe_ent *probe_ent)
{
-#ifndef CONFIG_SCSI_AHCI_PLAT
+#if !defined(CONFIG_SCSI_AHCI_PLAT) && !defined(CONFIG_DM_SCSI)
# ifdef CONFIG_DM_PCI
struct udevice *dev = probe_ent->dev;
struct pci_child_platdata *pplat = dev_get_parent_platdata(dev);
@@ -198,7 +198,7 @@
writel(cap_save, mmio + HOST_CAP);
writel_with_flush(0xf, mmio + HOST_PORTS_IMPL);
-#ifndef CONFIG_SCSI_AHCI_PLAT
+#if !defined(CONFIG_SCSI_AHCI_PLAT) && !defined(CONFIG_DM_SCSI)
# ifdef CONFIG_DM_PCI
if (pplat->vendor == PCI_VENDOR_ID_INTEL) {
u16 tmp16;
@@ -327,6 +327,7 @@
writel(tmp | HOST_IRQ_EN, mmio + HOST_CTL);
tmp = readl(mmio + HOST_CTL);
debug("HOST_CTL 0x%x\n", tmp);
+#if !defined(CONFIG_DM_SCSI)
#ifndef CONFIG_SCSI_AHCI_PLAT
# ifdef CONFIG_DM_PCI
dm_pci_read_config16(dev, PCI_COMMAND, &tmp16);
@@ -338,14 +339,15 @@
pci_write_config_word(pdev, PCI_COMMAND, tmp16);
# endif
#endif
+#endif
return 0;
}
static void ahci_print_info(struct ahci_probe_ent *probe_ent)
{
-#ifndef CONFIG_SCSI_AHCI_PLAT
-# ifdef CONFIG_DM_PCI
+#if !defined(CONFIG_SCSI_AHCI_PLAT) && !defined(CONFIG_DM_SCSI)
+# if defined(CONFIG_DM_PCI)
struct udevice *dev = probe_ent->dev;
# else
pci_dev_t pdev = probe_ent->dev;
@@ -372,7 +374,7 @@
else
speed_s = "?";
-#ifdef CONFIG_SCSI_AHCI_PLAT
+#if defined(CONFIG_SCSI_AHCI_PLAT) || defined(CONFIG_DM_SCSI)
scc_s = "SATA";
#else
# ifdef CONFIG_DM_PCI
@@ -424,13 +426,15 @@
}
#ifndef CONFIG_SCSI_AHCI_PLAT
-# ifdef CONFIG_DM_PCI
+# if defined(CONFIG_DM_PCI) || defined(CONFIG_DM_SCSI)
static int ahci_init_one(struct udevice *dev)
# else
static int ahci_init_one(pci_dev_t dev)
# endif
{
+#if !defined(CONFIG_DM_SCSI)
u16 vendor;
+#endif
int rc;
probe_ent = malloc(sizeof(struct ahci_probe_ent));
@@ -450,6 +454,7 @@
probe_ent->pio_mask = 0x1f;
probe_ent->udma_mask = 0x7f; /*Fixme,assume to support UDMA6 */
+#if !defined(CONFIG_DM_SCSI)
#ifdef CONFIG_DM_PCI
probe_ent->mmio_base = dm_pci_map_bar(dev, PCI_BASE_ADDRESS_5,
PCI_REGION_MEM);
@@ -473,6 +478,10 @@
if (vendor == 0x197b)
pci_write_config_byte(dev, 0x41, 0xa1);
#endif
+#else
+ struct scsi_platdata *plat = dev_get_platdata(dev);
+ probe_ent->mmio_base = (void *)plat->base;
+#endif
debug("ahci mmio_base=0x%p\n", probe_ent->mmio_base);
/* initialize adapter */
@@ -954,14 +963,17 @@
}
-
+#if defined(CONFIG_DM_SCSI)
+void scsi_low_level_init(int busdevfunc, struct udevice *dev)
+#else
void scsi_low_level_init(int busdevfunc)
+#endif
{
int i;
u32 linkmap;
#ifndef CONFIG_SCSI_AHCI_PLAT
-# ifdef CONFIG_DM_PCI
+# if defined(CONFIG_DM_PCI)
struct udevice *dev;
int ret;
@@ -969,6 +981,8 @@
if (ret)
return;
ahci_init_one(dev);
+# elif defined(CONFIG_DM_SCSI)
+ ahci_init_one(dev);
# else
ahci_init_one(busdevfunc);
# endif
diff --git a/drivers/block/blk-uclass.c b/drivers/block/blk-uclass.c
index 2e041c2..38cb938 100644
--- a/drivers/block/blk-uclass.c
+++ b/drivers/block/blk-uclass.c
@@ -26,7 +26,7 @@
static enum uclass_id if_type_uclass_id[IF_TYPE_COUNT] = {
[IF_TYPE_IDE] = UCLASS_INVALID,
- [IF_TYPE_SCSI] = UCLASS_INVALID,
+ [IF_TYPE_SCSI] = UCLASS_SCSI,
[IF_TYPE_ATAPI] = UCLASS_INVALID,
[IF_TYPE_USB] = UCLASS_MASS_STORAGE,
[IF_TYPE_DOC] = UCLASS_INVALID,
diff --git a/drivers/block/sata_ceva.c b/drivers/block/sata_ceva.c
index dcc3b90..9b54664 100644
--- a/drivers/block/sata_ceva.c
+++ b/drivers/block/sata_ceva.c
@@ -5,6 +5,7 @@
* SPDX-License-Identifier: GPL-2.0+
*/
#include <common.h>
+#include <dm.h>
#include <netdev.h>
#include <ahci.h>
#include <scsi.h>
@@ -73,10 +74,9 @@
#define DRV_NAME "ahci-ceva"
#define CEVA_FLAG_BROKEN_GEN2 1
-int init_sata(int dev)
+static int ceva_init_sata(ulong mmio)
{
ulong tmp;
- ulong mmio = ZYNQMP_SATA_BASEADDR;
int i;
/*
@@ -111,3 +111,40 @@
}
return 0;
}
+
+static int sata_ceva_probe(struct udevice *dev)
+{
+ struct scsi_platdata *plat = dev_get_platdata(dev);
+
+ ceva_init_sata(plat->base);
+ return 0;
+}
+
+static const struct udevice_id sata_ceva_ids[] = {
+ { .compatible = "ceva,ahci-1v84" },
+ { }
+};
+
+static int sata_ceva_ofdata_to_platdata(struct udevice *dev)
+{
+ struct scsi_platdata *plat = dev_get_platdata(dev);
+
+ plat->base = dev_get_addr(dev);
+ if (plat->base == FDT_ADDR_T_NONE)
+ return -EINVAL;
+
+ /* Hardcode number for ceva sata controller */
+ plat->max_lun = 1; /* Actually two but untested */
+ plat->max_id = 2;
+
+ return 0;
+}
+
+U_BOOT_DRIVER(ceva_host_blk) = {
+ .name = "ceva_sata",
+ .id = UCLASS_SCSI,
+ .of_match = sata_ceva_ids,
+ .probe = sata_ceva_probe,
+ .ofdata_to_platdata = sata_ceva_ofdata_to_platdata,
+ .platdata_auto_alloc_size = sizeof(struct scsi_platdata),
+};
diff --git a/drivers/block/scsi-uclass.c b/drivers/block/scsi-uclass.c
new file mode 100644
index 0000000..05da6cd
--- /dev/null
+++ b/drivers/block/scsi-uclass.c
@@ -0,0 +1,27 @@
+/*
+ * Copyright (c) 2015 Google, Inc
+ * Written by Simon Glass <sjg@chromium.org>
+ * Copyright (c) 2016 Xilinx, Inc
+ * Written by Michal Simek
+ *
+ * Based on ahci-uclass.c
+ *
+ * SPDX-License-Identifier: GPL-2.0+
+ */
+
+#include <common.h>
+#include <dm.h>
+#include <scsi.h>
+
+static int scsi_post_probe(struct udevice *dev)
+{
+ debug("%s: device %p\n", __func__, dev);
+ scsi_low_level_init(0, dev);
+ return 0;
+}
+
+UCLASS_DRIVER(scsi) = {
+ .id = UCLASS_SCSI,
+ .name = "scsi",
+ .post_probe = scsi_post_probe,
+};
diff --git a/drivers/fpga/Kconfig b/drivers/fpga/Kconfig
index f3f6bf7..a760944 100644
--- a/drivers/fpga/Kconfig
+++ b/drivers/fpga/Kconfig
@@ -3,6 +3,26 @@
config FPGA
bool
+config FPGA_ALTERA
+ bool "Enable Altera FPGA drivers"
+ select FPGA
+ help
+ Say Y here to enable the Altera FPGA driver
+
+ This provides basic infrastructure to support Altera FPGA devices.
+ Enable Altera FPGA specific functions which includes bitstream
+ (in BIT format), fpga and device validation.
+
+config FPGA_CYCLON2
+ bool "Enable Altera FPGA driver for Cyclone II"
+ depends on FPGA_ALTERA
+ help
+ Say Y here to enable the Altera Cyclone II FPGA specific driver
+
+ This provides common functionality for Altera Cyclone II devices.
+ Enable FPGA driver for loading bitstream in BIT and BIN format
+ on Altera Cyclone II device.
+
config FPGA_XILINX
bool "Enable Xilinx FPGA drivers"
select FPGA
diff --git a/drivers/gpio/zynq_gpio.c b/drivers/gpio/zynq_gpio.c
index 8a448c9..64579a1 100644
--- a/drivers/gpio/zynq_gpio.c
+++ b/drivers/gpio/zynq_gpio.c
@@ -325,7 +325,6 @@
.get_value = zynq_gpio_get_value,
.set_value = zynq_gpio_set_value,
.get_function = zynq_gpio_get_function,
-
};
static const struct udevice_id zynq_gpio_ids[] = {
diff --git a/drivers/i2c/Kconfig b/drivers/i2c/Kconfig
index 1537b67..051f911 100644
--- a/drivers/i2c/Kconfig
+++ b/drivers/i2c/Kconfig
@@ -109,6 +109,14 @@
the I2C API meaning that any I2C operations will immediately fail
for now.
+config SYS_I2C_MXC
+ bool "NXP i.MX I2C driver"
+ depends on MX6
+ help
+ Add support for the NXP i.MX I2C driver. This supports upto for bus
+ channels and operating on standard mode upto 100 kbits/s and fast
+ mode upto 400 kbits/s.
+
config SYS_I2C_ROCKCHIP
bool "Rockchip I2C driver"
depends on DM_I2C
diff --git a/drivers/i2c/mv_i2c.c b/drivers/i2c/mv_i2c.c
index 7f52fa2..c780272 100644
--- a/drivers/i2c/mv_i2c.c
+++ b/drivers/i2c/mv_i2c.c
@@ -270,7 +270,7 @@
msg.condition = I2C_COND_NORMAL;
msg.acknack = I2C_ACKNAK_WAITACK;
msg.direction = I2C_WRITE;
- msg.data = *(addr++);
+ msg.data = addr[alen];
if (i2c_transfer(base, &msg))
return -1;
}
@@ -341,7 +341,7 @@
msg.condition = I2C_COND_NORMAL;
msg.acknack = I2C_ACKNAK_WAITACK;
msg.direction = I2C_WRITE;
- msg.data = *(addr++);
+ msg.data = addr[alen];
if (i2c_transfer(base, &msg))
return -1;
}
diff --git a/drivers/i2c/mxc_i2c.c b/drivers/i2c/mxc_i2c.c
index 6247d33..94d9027 100644
--- a/drivers/i2c/mxc_i2c.c
+++ b/drivers/i2c/mxc_i2c.c
@@ -775,7 +775,7 @@
*/
ret = fdt_stringlist_search(fdt, node, "pinctrl-names", "gpio");
if (ret < 0) {
- dev_info(dev, "i2c bus %d at %lu, no gpio pinctrl state.\n", bus->seq, i2c_bus->base);
+ debug("i2c bus %d at 0x%2lx, no gpio pinctrl state.\n", bus->seq, i2c_bus->base);
} else {
ret = gpio_request_by_name_nodev(fdt, node, "scl-gpios",
0, &i2c_bus->scl_gpio,
diff --git a/drivers/misc/mxc_ocotp.c b/drivers/misc/mxc_ocotp.c
index 8a100c1..0b1c050 100644
--- a/drivers/misc/mxc_ocotp.c
+++ b/drivers/misc/mxc_ocotp.c
@@ -62,7 +62,7 @@
#define FUSE_BANK_SIZE 0x80
#ifdef CONFIG_MX6SL
#define FUSE_BANKS 8
-#elif defined(CONFIG_MX6ULL)
+#elif defined(CONFIG_MX6ULL) || defined(CONFIG_MX6SLL)
#define FUSE_BANKS 9
#else
#define FUSE_BANKS 16
@@ -79,7 +79,7 @@
/*
* There is a hole in shadow registers address map of size 0x100
* between bank 5 and bank 6 on iMX6QP, iMX6DQ, iMX6SDL, iMX6SX,
- * iMX6UL and i.MX6ULL.
+ * iMX6UL, i.MX6ULL and i.MX6SLL.
* Bank 5 ends at 0x6F0 and Bank 6 starts at 0x800. When reading the fuses,
* we should account for this hole in address space.
*
@@ -100,8 +100,8 @@
if (is_mx6sl()) {
phy_index = index;
- } else if (is_mx6ul() || is_mx6ull()) {
- if (is_mx6ull() && index == 8)
+ } else if (is_mx6ul() || is_mx6ull() || is_mx6sll()) {
+ if ((is_mx6ull() || is_mx6sll()) && index == 8)
index = 7;
if (index >= 6)
@@ -121,7 +121,7 @@
u32 fuse_word_physical(u32 bank, u32 word_index)
{
- if (is_mx6ull()) {
+ if (is_mx6ull() || is_mx6sll()) {
if (bank == 8)
word_index = word_index + 4;
}
@@ -164,10 +164,10 @@
return -EINVAL;
}
- if (is_mx6ull()) {
+ if (is_mx6ull() || is_mx6sll()) {
if ((bank == 7 || bank == 8) &&
word >= ARRAY_SIZE((*regs)->bank[0].fuse_regs) >> 3) {
- printf("mxc_ocotp %s(): Invalid argument on 6ULL\n", caller);
+ printf("mxc_ocotp %s(): Invalid argument\n", caller);
return -EINVAL;
}
}
@@ -271,7 +271,7 @@
#else
u32 addr;
/* Bank 7 and Bank 8 only supports 4 words each for i.MX6ULL */
- if ((is_mx6ull()) && (bank > 7)) {
+ if ((is_mx6ull() || is_mx6sll()) && (bank > 7)) {
bank = bank - 1;
word += 4;
}
diff --git a/drivers/net/Kconfig b/drivers/net/Kconfig
index f25d3ff..929b9e2 100644
--- a/drivers/net/Kconfig
+++ b/drivers/net/Kconfig
@@ -142,7 +142,7 @@
config FEC_MXC
bool "FEC Ethernet controller"
- depends on MX6
+ depends on MX5 || MX6
help
This driver supports the 10/100 Fast Ethernet controller for
NXP i.MX processors.
diff --git a/drivers/net/fec_mxc.c b/drivers/net/fec_mxc.c
index 84021ea..3304fddc 100644
--- a/drivers/net/fec_mxc.c
+++ b/drivers/net/fec_mxc.c
@@ -9,20 +9,22 @@
*/
#include <common.h>
+#include <dm.h>
#include <malloc.h>
#include <memalign.h>
+#include <miiphy.h>
#include <net.h>
#include <netdev.h>
-#include <miiphy.h>
#include "fec_mxc.h"
-#include <asm/arch/clock.h>
-#include <asm/arch/imx-regs.h>
-#include <asm/imx-common/sys_proto.h>
#include <asm/io.h>
#include <linux/errno.h>
#include <linux/compiler.h>
+#include <asm/arch/clock.h>
+#include <asm/arch/imx-regs.h>
+#include <asm/imx-common/sys_proto.h>
+
DECLARE_GLOBAL_DATA_PTR;
/*
@@ -79,11 +81,9 @@
}
#endif
-/*
- * MII-interface related functions
- */
-static int fec_mdio_read(struct ethernet_regs *eth, uint8_t phyAddr,
- uint8_t regAddr)
+/* MII-interface related functions */
+static int fec_mdio_read(struct ethernet_regs *eth, uint8_t phyaddr,
+ uint8_t regaddr)
{
uint32_t reg; /* convenient holder for the PHY register */
uint32_t phy; /* convenient holder for the PHY */
@@ -95,15 +95,13 @@
* programming the FEC's MII data register.
*/
writel(FEC_IEVENT_MII, ð->ievent);
- reg = regAddr << FEC_MII_DATA_RA_SHIFT;
- phy = phyAddr << FEC_MII_DATA_PA_SHIFT;
+ reg = regaddr << FEC_MII_DATA_RA_SHIFT;
+ phy = phyaddr << FEC_MII_DATA_PA_SHIFT;
writel(FEC_MII_DATA_ST | FEC_MII_DATA_OP_RD | FEC_MII_DATA_TA |
phy | reg, ð->mii_data);
- /*
- * wait for the related interrupt
- */
+ /* wait for the related interrupt */
start = get_timer(0);
while (!(readl(ð->ievent) & FEC_IEVENT_MII)) {
if (get_timer(start) > (CONFIG_SYS_HZ / 1000)) {
@@ -112,17 +110,13 @@
}
}
- /*
- * clear mii interrupt bit
- */
+ /* clear mii interrupt bit */
writel(FEC_IEVENT_MII, ð->ievent);
- /*
- * it's now safe to read the PHY's register
- */
+ /* it's now safe to read the PHY's register */
val = (unsigned short)readl(ð->mii_data);
- debug("%s: phy: %02x reg:%02x val:%#x\n", __func__, phyAddr,
- regAddr, val);
+ debug("%s: phy: %02x reg:%02x val:%#x\n", __func__, phyaddr,
+ regaddr, val);
return val;
}
@@ -153,22 +147,20 @@
debug("%s: mii_speed %08x\n", __func__, readl(ð->mii_speed));
}
-static int fec_mdio_write(struct ethernet_regs *eth, uint8_t phyAddr,
- uint8_t regAddr, uint16_t data)
+static int fec_mdio_write(struct ethernet_regs *eth, uint8_t phyaddr,
+ uint8_t regaddr, uint16_t data)
{
uint32_t reg; /* convenient holder for the PHY register */
uint32_t phy; /* convenient holder for the PHY */
uint32_t start;
- reg = regAddr << FEC_MII_DATA_RA_SHIFT;
- phy = phyAddr << FEC_MII_DATA_PA_SHIFT;
+ reg = regaddr << FEC_MII_DATA_RA_SHIFT;
+ phy = phyaddr << FEC_MII_DATA_PA_SHIFT;
writel(FEC_MII_DATA_ST | FEC_MII_DATA_OP_WR |
FEC_MII_DATA_TA | phy | reg | data, ð->mii_data);
- /*
- * wait for the MII interrupt
- */
+ /* wait for the MII interrupt */
start = get_timer(0);
while (!(readl(ð->ievent) & FEC_IEVENT_MII)) {
if (get_timer(start) > (CONFIG_SYS_HZ / 1000)) {
@@ -177,26 +169,24 @@
}
}
- /*
- * clear MII interrupt bit
- */
+ /* clear MII interrupt bit */
writel(FEC_IEVENT_MII, ð->ievent);
- debug("%s: phy: %02x reg:%02x val:%#x\n", __func__, phyAddr,
- regAddr, data);
+ debug("%s: phy: %02x reg:%02x val:%#x\n", __func__, phyaddr,
+ regaddr, data);
return 0;
}
-static int fec_phy_read(struct mii_dev *bus, int phyAddr, int dev_addr,
- int regAddr)
+static int fec_phy_read(struct mii_dev *bus, int phyaddr, int dev_addr,
+ int regaddr)
{
- return fec_mdio_read(bus->priv, phyAddr, regAddr);
+ return fec_mdio_read(bus->priv, phyaddr, regaddr);
}
-static int fec_phy_write(struct mii_dev *bus, int phyAddr, int dev_addr,
- int regAddr, u16 data)
+static int fec_phy_write(struct mii_dev *bus, int phyaddr, int dev_addr,
+ int regaddr, u16 data)
{
- return fec_mdio_write(bus->priv, phyAddr, regAddr, data);
+ return fec_mdio_write(bus->priv, phyaddr, regaddr, data);
}
#ifndef CONFIG_PHYLIB
@@ -217,14 +207,12 @@
fec_mdio_write(eth, fec->phy_id, MII_BMCR, BMCR_RESET);
udelay(1000);
- /*
- * Set the auto-negotiation advertisement register bits
- */
+ /* Set the auto-negotiation advertisement register bits */
fec_mdio_write(eth, fec->phy_id, MII_ADVERTISE,
- LPA_100FULL | LPA_100HALF | LPA_10FULL |
- LPA_10HALF | PHY_ANLPAR_PSB_802_3);
+ LPA_100FULL | LPA_100HALF | LPA_10FULL |
+ LPA_10HALF | PHY_ANLPAR_PSB_802_3);
fec_mdio_write(eth, fec->phy_id, MII_BMCR,
- BMCR_ANENABLE | BMCR_ANRESTART);
+ BMCR_ANENABLE | BMCR_ANRESTART);
if (fec->mii_postcall)
ret = fec->mii_postcall(fec->phy_id);
@@ -241,9 +229,7 @@
struct fec_priv *fec = (struct fec_priv *)dev->priv;
struct ethernet_regs *eth = fec->bus->priv;
- /*
- * Wait for AN completion
- */
+ /* Wait for AN completion */
start = get_timer(0);
do {
if (get_timer(start) > (CONFIG_SYS_HZ * 5)) {
@@ -254,7 +240,7 @@
status = fec_mdio_read(eth, fec->phy_id, MII_BMSR);
if (status < 0) {
printf("%s: Autonegotiation failed. status: %d\n",
- dev->name, status);
+ dev->name, status);
return -1;
}
} while (!(status & BMSR_LSTATUS));
@@ -351,65 +337,63 @@
/**
* Mark the given read buffer descriptor as free
* @param[in] last 1 if this is the last buffer descriptor in the chain, else 0
- * @param[in] pRbd buffer descriptor to mark free again
+ * @param[in] prbd buffer descriptor to mark free again
*/
-static void fec_rbd_clean(int last, struct fec_bd *pRbd)
+static void fec_rbd_clean(int last, struct fec_bd *prbd)
{
unsigned short flags = FEC_RBD_EMPTY;
if (last)
flags |= FEC_RBD_WRAP;
- writew(flags, &pRbd->status);
- writew(0, &pRbd->data_length);
+ writew(flags, &prbd->status);
+ writew(0, &prbd->data_length);
}
-static int fec_get_hwaddr(struct eth_device *dev, int dev_id,
- unsigned char *mac)
+static int fec_get_hwaddr(int dev_id, unsigned char *mac)
{
imx_get_mac_from_fuse(dev_id, mac);
return !is_valid_ethaddr(mac);
}
+#ifdef CONFIG_DM_ETH
+static int fecmxc_set_hwaddr(struct udevice *dev)
+#else
static int fec_set_hwaddr(struct eth_device *dev)
+#endif
{
+#ifdef CONFIG_DM_ETH
+ struct fec_priv *fec = dev_get_priv(dev);
+ struct eth_pdata *pdata = dev_get_platdata(dev);
+ uchar *mac = pdata->enetaddr;
+#else
uchar *mac = dev->enetaddr;
struct fec_priv *fec = (struct fec_priv *)dev->priv;
+#endif
writel(0, &fec->eth->iaddr1);
writel(0, &fec->eth->iaddr2);
writel(0, &fec->eth->gaddr1);
writel(0, &fec->eth->gaddr2);
- /*
- * Set physical address
- */
+ /* Set physical address */
writel((mac[0] << 24) + (mac[1] << 16) + (mac[2] << 8) + mac[3],
- &fec->eth->paddr1);
+ &fec->eth->paddr1);
writel((mac[4] << 24) + (mac[5] << 16) + 0x8808, &fec->eth->paddr2);
return 0;
}
-/*
- * Do initial configuration of the FEC registers
- */
+/* Do initial configuration of the FEC registers */
static void fec_reg_setup(struct fec_priv *fec)
{
uint32_t rcntrl;
- /*
- * Set interrupt mask register
- */
+ /* Set interrupt mask register */
writel(0x00000000, &fec->eth->imask);
- /*
- * Clear FEC-Lite interrupt event register(IEVENT)
- */
+ /* Clear FEC-Lite interrupt event register(IEVENT) */
writel(0xffffffff, &fec->eth->ievent);
-
- /*
- * Set FEC-Lite receive control register(R_CNTRL):
- */
+ /* Set FEC-Lite receive control register(R_CNTRL): */
/* Start with frame length = 1518, common for all modes. */
rcntrl = PKTSIZE << FEC_RCNTRL_MAX_FL_SHIFT;
@@ -427,9 +411,17 @@
* Start the FEC engine
* @param[in] dev Our device to handle
*/
+#ifdef CONFIG_DM_ETH
+static int fec_open(struct udevice *dev)
+#else
static int fec_open(struct eth_device *edev)
+#endif
{
+#ifdef CONFIG_DM_ETH
+ struct fec_priv *fec = dev_get_priv(dev);
+#else
struct fec_priv *fec = (struct fec_priv *)edev->priv;
+#endif
int speed;
uint32_t addr, size;
int i;
@@ -453,22 +445,19 @@
#ifdef FEC_QUIRK_ENET_MAC
/* Enable ENET HW endian SWAP */
writel(readl(&fec->eth->ecntrl) | FEC_ECNTRL_DBSWAP,
- &fec->eth->ecntrl);
+ &fec->eth->ecntrl);
/* Enable ENET store and forward mode */
writel(readl(&fec->eth->x_wmrk) | FEC_X_WMRK_STRFWD,
- &fec->eth->x_wmrk);
+ &fec->eth->x_wmrk);
#endif
- /*
- * Enable FEC-Lite controller
- */
+ /* Enable FEC-Lite controller */
writel(readl(&fec->eth->ecntrl) | FEC_ECNTRL_ETHER_EN,
- &fec->eth->ecntrl);
+ &fec->eth->ecntrl);
+
#if defined(CONFIG_MX25) || defined(CONFIG_MX53) || defined(CONFIG_MX6SL)
udelay(100);
- /*
- * setup the MII gasket for RMII mode
- */
+ /* setup the MII gasket for RMII mode */
/* disable the gasket */
writew(0, &fec->eth->miigsk_enr);
@@ -526,27 +515,35 @@
#endif
debug("%s:Speed=%i\n", __func__, speed);
- /*
- * Enable SmartDMA receive task
- */
+ /* Enable SmartDMA receive task */
fec_rx_task_enable(fec);
udelay(100000);
return 0;
}
-static int fec_init(struct eth_device *dev, bd_t* bd)
+#ifdef CONFIG_DM_ETH
+static int fecmxc_init(struct udevice *dev)
+#else
+static int fec_init(struct eth_device *dev, bd_t *bd)
+#endif
{
+#ifdef CONFIG_DM_ETH
+ struct fec_priv *fec = dev_get_priv(dev);
+#else
struct fec_priv *fec = (struct fec_priv *)dev->priv;
+#endif
uint32_t mib_ptr = (uint32_t)&fec->eth->rmon_t_drop;
int i;
/* Initialize MAC address */
+#ifdef CONFIG_DM_ETH
+ fecmxc_set_hwaddr(dev);
+#else
fec_set_hwaddr(dev);
+#endif
- /*
- * Setup transmit descriptors, there are two in total.
- */
+ /* Setup transmit descriptors, there are two in total. */
fec_tbd_init(fec);
/* Setup receive descriptors. */
@@ -557,18 +554,14 @@
if (fec->xcv_type != SEVENWIRE)
fec_mii_setspeed(fec->bus->priv);
- /*
- * Set Opcode/Pause Duration Register
- */
+ /* Set Opcode/Pause Duration Register */
writel(0x00010020, &fec->eth->op_pause); /* FIXME 0xffff0020; */
writel(0x2, &fec->eth->x_wmrk);
- /*
- * Set multicast address filter
- */
+
+ /* Set multicast address filter */
writel(0x00000000, &fec->eth->gaddr1);
writel(0x00000000, &fec->eth->gaddr2);
-
/* Do not access reserved register for i.MX6UL */
if (!is_mx6ul()) {
/* clear MIB RAM */
@@ -596,27 +589,29 @@
* Halt the FEC engine
* @param[in] dev Our device to handle
*/
+#ifdef CONFIG_DM_ETH
+static void fecmxc_halt(struct udevice *dev)
+#else
static void fec_halt(struct eth_device *dev)
+#endif
{
+#ifdef CONFIG_DM_ETH
+ struct fec_priv *fec = dev_get_priv(dev);
+#else
struct fec_priv *fec = (struct fec_priv *)dev->priv;
+#endif
int counter = 0xffff;
- /*
- * issue graceful stop command to the FEC transmitter if necessary
- */
+ /* issue graceful stop command to the FEC transmitter if necessary */
writel(FEC_TCNTRL_GTS | readl(&fec->eth->x_cntrl),
- &fec->eth->x_cntrl);
+ &fec->eth->x_cntrl);
debug("eth_halt: wait for stop regs\n");
- /*
- * wait for graceful stop to register
- */
+ /* wait for graceful stop to register */
while ((counter--) && (!(readl(&fec->eth->ievent) & FEC_IEVENT_GRA)))
udelay(1);
- /*
- * Disable SmartDMA tasks
- */
+ /* Disable SmartDMA tasks */
fec_tx_task_disable(fec);
fec_rx_task_disable(fec);
@@ -625,7 +620,7 @@
* Note: this will also reset the BD index counter!
*/
writel(readl(&fec->eth->ecntrl) & ~FEC_ECNTRL_ETHER_EN,
- &fec->eth->ecntrl);
+ &fec->eth->ecntrl);
fec->rbd_index = 0;
fec->tbd_index = 0;
debug("eth_halt: done\n");
@@ -638,7 +633,11 @@
* @param[in] length Data count in bytes
* @return 0 on success
*/
+#ifdef CONFIG_DM_ETH
+static int fecmxc_send(struct udevice *dev, void *packet, int length)
+#else
static int fec_send(struct eth_device *dev, void *packet, int length)
+#endif
{
unsigned int status;
uint32_t size, end;
@@ -650,7 +649,11 @@
* This routine transmits one frame. This routine only accepts
* 6-byte Ethernet addresses.
*/
+#ifdef CONFIG_DM_ETH
+ struct fec_priv *fec = dev_get_priv(dev);
+#else
struct fec_priv *fec = (struct fec_priv *)dev->priv;
+#endif
/*
* Check for valid length of data.
@@ -720,9 +723,7 @@
*/
readl(addr + size - 4);
- /*
- * Enable SmartDMA transmit task
- */
+ /* Enable SmartDMA transmit task */
fec_tx_task_enable(fec);
/*
@@ -767,8 +768,8 @@
out:
debug("fec_send: status 0x%x index %d ret %i\n",
- readw(&fec->tbd_base[fec->tbd_index].status),
- fec->tbd_index, ret);
+ readw(&fec->tbd_base[fec->tbd_index].status),
+ fec->tbd_index, ret);
/* for next transmission use the other buffer */
if (fec->tbd_index)
fec->tbd_index = 0;
@@ -783,9 +784,17 @@
* @param[in] dev Our ethernet device to handle
* @return Length of packet read
*/
+#ifdef CONFIG_DM_ETH
+static int fecmxc_recv(struct udevice *dev, int flags, uchar **packetp)
+#else
static int fec_recv(struct eth_device *dev)
+#endif
{
+#ifdef CONFIG_DM_ETH
+ struct fec_priv *fec = dev_get_priv(dev);
+#else
struct fec_priv *fec = (struct fec_priv *)dev->priv;
+#endif
struct fec_bd *rbd = &fec->rbd_base[fec->rbd_index];
unsigned long ievent;
int frame_length, len = 0;
@@ -794,30 +803,41 @@
int i;
ALLOC_CACHE_ALIGN_BUFFER(uchar, buff, FEC_MAX_PKT_SIZE);
- /*
- * Check if any critical events have happened
- */
+ /* Check if any critical events have happened */
ievent = readl(&fec->eth->ievent);
writel(ievent, &fec->eth->ievent);
debug("fec_recv: ievent 0x%lx\n", ievent);
if (ievent & FEC_IEVENT_BABR) {
+#ifdef CONFIG_DM_ETH
+ fecmxc_halt(dev);
+ fecmxc_init(dev);
+#else
fec_halt(dev);
fec_init(dev, fec->bd);
+#endif
printf("some error: 0x%08lx\n", ievent);
return 0;
}
if (ievent & FEC_IEVENT_HBERR) {
/* Heartbeat error */
writel(0x00000001 | readl(&fec->eth->x_cntrl),
- &fec->eth->x_cntrl);
+ &fec->eth->x_cntrl);
}
if (ievent & FEC_IEVENT_GRA) {
/* Graceful stop complete */
if (readl(&fec->eth->x_cntrl) & 0x00000001) {
+#ifdef CONFIG_DM_ETH
+ fecmxc_halt(dev);
+#else
fec_halt(dev);
+#endif
writel(~0x00000001 & readl(&fec->eth->x_cntrl),
- &fec->eth->x_cntrl);
+ &fec->eth->x_cntrl);
+#ifdef CONFIG_DM_ETH
+ fecmxc_init(dev);
+#else
fec_init(dev, fec->bd);
+#endif
}
}
@@ -844,22 +864,16 @@
if (!(bd_status & FEC_RBD_EMPTY)) {
if ((bd_status & FEC_RBD_LAST) && !(bd_status & FEC_RBD_ERR) &&
- ((readw(&rbd->data_length) - 4) > 14)) {
- /*
- * Get buffer address and size
- */
+ ((readw(&rbd->data_length) - 4) > 14)) {
+ /* Get buffer address and size */
addr = readl(&rbd->data_pointer);
frame_length = readw(&rbd->data_length) - 4;
- /*
- * Invalidate data cache over the buffer
- */
+ /* Invalidate data cache over the buffer */
end = roundup(addr + frame_length, ARCH_DMA_MINALIGN);
addr &= ~(ARCH_DMA_MINALIGN - 1);
invalidate_dcache_range(addr, end);
- /*
- * Fill the buffer and pass it to upper layers
- */
+ /* Fill the buffer and pass it to upper layers */
#ifdef CONFIG_FEC_MXC_SWAP_PACKET
swap_packet((uint32_t *)addr, frame_length);
#endif
@@ -887,7 +901,7 @@
&fec->rbd_base[i]);
}
flush_dcache_range(addr,
- addr + ARCH_DMA_MINALIGN);
+ addr + ARCH_DMA_MINALIGN);
}
fec_rx_task_enable(fec);
@@ -971,6 +985,33 @@
free(fec->tbd_base);
}
+struct mii_dev *fec_get_miibus(uint32_t base_addr, int dev_id)
+{
+ struct ethernet_regs *eth = (struct ethernet_regs *)base_addr;
+ struct mii_dev *bus;
+ int ret;
+
+ bus = mdio_alloc();
+ if (!bus) {
+ printf("mdio_alloc failed\n");
+ return NULL;
+ }
+ bus->read = fec_phy_read;
+ bus->write = fec_phy_write;
+ bus->priv = eth;
+ fec_set_dev_name(bus->name, dev_id);
+
+ ret = mdio_register(bus);
+ if (ret) {
+ printf("mdio_register failed\n");
+ free(bus);
+ return NULL;
+ }
+ fec_mii_setspeed(eth);
+ return bus;
+}
+
+#ifndef CONFIG_DM_ETH
#ifdef CONFIG_PHYLIB
int fec_probe(bd_t *bd, int dev_id, uint32_t base_addr,
struct mii_dev *bus, struct phy_device *phydev)
@@ -1045,7 +1086,7 @@
#endif
eth_register(edev);
- if (fec_get_hwaddr(edev, dev_id, ethaddr) == 0) {
+ if (fec_get_hwaddr(dev_id, ethaddr) == 0) {
debug("got MAC%d address from fuse: %pM\n", dev_id, ethaddr);
memcpy(edev->enetaddr, ethaddr, 6);
if (!getenv("ethaddr"))
@@ -1062,32 +1103,6 @@
return ret;
}
-struct mii_dev *fec_get_miibus(uint32_t base_addr, int dev_id)
-{
- struct ethernet_regs *eth = (struct ethernet_regs *)base_addr;
- struct mii_dev *bus;
- int ret;
-
- bus = mdio_alloc();
- if (!bus) {
- printf("mdio_alloc failed\n");
- return NULL;
- }
- bus->read = fec_phy_read;
- bus->write = fec_phy_write;
- bus->priv = eth;
- fec_set_dev_name(bus->name, dev_id);
-
- ret = mdio_register(bus);
- if (ret) {
- printf("mdio_register failed\n");
- free(bus);
- return NULL;
- }
- fec_mii_setspeed(eth);
- return bus;
-}
-
int fecmxc_initialize_multi(bd_t *bd, int dev_id, int phy_id, uint32_t addr)
{
uint32_t base_mii;
@@ -1147,3 +1162,151 @@
return 0;
}
#endif
+
+#else
+
+static int fecmxc_read_rom_hwaddr(struct udevice *dev)
+{
+ struct fec_priv *priv = dev_get_priv(dev);
+ struct eth_pdata *pdata = dev_get_platdata(dev);
+
+ return fec_get_hwaddr(priv->dev_id, pdata->enetaddr);
+}
+
+static const struct eth_ops fecmxc_ops = {
+ .start = fecmxc_init,
+ .send = fecmxc_send,
+ .recv = fecmxc_recv,
+ .stop = fecmxc_halt,
+ .write_hwaddr = fecmxc_set_hwaddr,
+ .read_rom_hwaddr = fecmxc_read_rom_hwaddr,
+};
+
+static int fec_phy_init(struct fec_priv *priv, struct udevice *dev)
+{
+ struct phy_device *phydev;
+ int mask = 0xffffffff;
+
+#ifdef CONFIG_PHYLIB
+ mask = 1 << CONFIG_FEC_MXC_PHYADDR;
+#endif
+
+ phydev = phy_find_by_mask(priv->bus, mask, priv->interface);
+ if (!phydev)
+ return -ENODEV;
+
+ phy_connect_dev(phydev, dev);
+
+ priv->phydev = phydev;
+ phy_config(phydev);
+
+ return 0;
+}
+
+static int fecmxc_probe(struct udevice *dev)
+{
+ struct eth_pdata *pdata = dev_get_platdata(dev);
+ struct fec_priv *priv = dev_get_priv(dev);
+ struct mii_dev *bus = NULL;
+ int dev_id = -1;
+ uint32_t start;
+ int ret;
+
+ ret = fec_alloc_descs(priv);
+ if (ret)
+ return ret;
+
+ bus = fec_get_miibus((uint32_t)priv->eth, dev_id);
+ if (!bus)
+ goto err_mii;
+
+ priv->bus = bus;
+ priv->xcv_type = CONFIG_FEC_XCV_TYPE;
+ priv->interface = pdata->phy_interface;
+ ret = fec_phy_init(priv, dev);
+ if (ret)
+ goto err_phy;
+
+ /* Reset chip. */
+ writel(readl(&priv->eth->ecntrl) | FEC_ECNTRL_RESET,
+ &priv->eth->ecntrl);
+ start = get_timer(0);
+ while (readl(&priv->eth->ecntrl) & FEC_ECNTRL_RESET) {
+ if (get_timer(start) > (CONFIG_SYS_HZ * 5)) {
+ printf("FEC MXC: Timeout reseting chip\n");
+ goto err_timeout;
+ }
+ udelay(10);
+ }
+
+ fec_reg_setup(priv);
+ fec_set_dev_name((char *)dev->name, dev_id);
+ priv->dev_id = (dev_id == -1) ? 0 : dev_id;
+
+ return 0;
+
+err_timeout:
+ free(priv->phydev);
+err_phy:
+ mdio_unregister(bus);
+ free(bus);
+err_mii:
+ fec_free_descs(priv);
+ return ret;
+}
+
+static int fecmxc_remove(struct udevice *dev)
+{
+ struct fec_priv *priv = dev_get_priv(dev);
+
+ free(priv->phydev);
+ fec_free_descs(priv);
+ mdio_unregister(priv->bus);
+ mdio_free(priv->bus);
+
+ return 0;
+}
+
+static int fecmxc_ofdata_to_platdata(struct udevice *dev)
+{
+ struct eth_pdata *pdata = dev_get_platdata(dev);
+ struct fec_priv *priv = dev_get_priv(dev);
+ const char *phy_mode;
+
+ pdata->iobase = (phys_addr_t)dev_get_addr(dev);
+ priv->eth = (struct ethernet_regs *)pdata->iobase;
+
+ pdata->phy_interface = -1;
+ phy_mode = fdt_getprop(gd->fdt_blob, dev->of_offset, "phy-mode", NULL);
+ if (phy_mode)
+ pdata->phy_interface = phy_get_interface_by_name(phy_mode);
+ if (pdata->phy_interface == -1) {
+ debug("%s: Invalid PHY interface '%s'\n", __func__, phy_mode);
+ return -EINVAL;
+ }
+
+ /* TODO
+ * Need to get the reset-gpio and related properties from DT
+ * and implemet the enet reset code on .probe call
+ */
+
+ return 0;
+}
+
+static const struct udevice_id fecmxc_ids[] = {
+ { .compatible = "fsl,imx6q-fec" },
+ { }
+};
+
+U_BOOT_DRIVER(fecmxc_gem) = {
+ .name = "fecmxc",
+ .id = UCLASS_ETH,
+ .of_match = fecmxc_ids,
+ .ofdata_to_platdata = fecmxc_ofdata_to_platdata,
+ .probe = fecmxc_probe,
+ .remove = fecmxc_remove,
+ .ops = &fecmxc_ops,
+ .priv_auto_alloc_size = sizeof(struct fec_priv),
+ .platdata_auto_alloc_size = sizeof(struct eth_pdata),
+};
+#endif
diff --git a/drivers/net/fec_mxc.h b/drivers/net/fec_mxc.h
index 0717cc6..43a7d7b 100644
--- a/drivers/net/fec_mxc.h
+++ b/drivers/net/fec_mxc.h
@@ -14,21 +14,14 @@
* SPDX-License-Identifier: GPL-2.0+
*/
-
#ifndef __FEC_MXC_H
#define __FEC_MXC_H
-void imx_get_mac_from_fuse(int dev_id, unsigned char *mac);
-
-/**
- * Layout description of the FEC
- */
+/* Layout description of the FEC */
struct ethernet_regs {
+ /* [10:2]addr = 00 */
-/* [10:2]addr = 00 */
-
-/* Control and status Registers (offset 000-1FF) */
-
+ /* Control and status Registers (offset 000-1FF) */
uint32_t res0[1]; /* MBAR_ETH + 0x000 */
uint32_t ievent; /* MBAR_ETH + 0x004 */
uint32_t imask; /* MBAR_ETH + 0x008 */
@@ -71,8 +64,7 @@
uint32_t emrbr; /* MBAR_ETH + 0x188 */
uint32_t res12[29]; /* MBAR_ETH + 0x18C-1FC */
-/* MIB COUNTERS (Offset 200-2FF) */
-
+ /* MIB COUNTERS (Offset 200-2FF) */
uint32_t rmon_t_drop; /* MBAR_ETH + 0x200 */
uint32_t rmon_t_packets; /* MBAR_ETH + 0x204 */
uint32_t rmon_t_bc_pkt; /* MBAR_ETH + 0x208 */
@@ -174,7 +166,6 @@
#define FEC_IMASKT_RL 0x00100000
#define FEC_IMASK_UN 0x00080000
-
#define FEC_RCNTRL_MAX_FL_SHIFT 16
#define FEC_RCNTRL_LOOP 0x00000001
#define FEC_RCNTRL_DRT 0x00000002
@@ -233,9 +224,7 @@
uint32_t data_pointer; /* payload's buffer address */
};
-/**
- * Supported phy types on this platform
- */
+/* Supported phy types on this platform */
enum xceiver_type {
SEVENWIRE, /* 7-wire */
MII10, /* MII 10Mbps */
@@ -244,9 +233,7 @@
RGMII, /* RGMII */
};
-/**
- * @brief i.MX27-FEC private structure
- */
+/* @brief i.MX27-FEC private structure */
struct fec_priv {
struct ethernet_regs *eth; /* pointer to register'S base */
enum xceiver_type xcv_type; /* transceiver type */
@@ -264,8 +251,14 @@
int phy_id;
int (*mii_postcall)(int);
#endif
+
+#ifdef CONFIG_DM_ETH
+ u32 interface;
+#endif
};
+void imx_get_mac_from_fuse(int dev_id, unsigned char *mac);
+
/**
* @brief Numbers of buffer descriptors for receiving
*
diff --git a/drivers/net/xilinx_axi_emac.c b/drivers/net/xilinx_axi_emac.c
index 5de06ef..51c7426 100644
--- a/drivers/net/xilinx_axi_emac.c
+++ b/drivers/net/xilinx_axi_emac.c
@@ -648,9 +648,8 @@
priv->bus->read = axiemac_miiphy_read;
priv->bus->write = axiemac_miiphy_write;
priv->bus->priv = priv;
- strcpy(priv->bus->name, "axi_emac");
- ret = mdio_register(priv->bus);
+ ret = mdio_register_seq(priv->bus, dev->seq);
if (ret)
return ret;
diff --git a/drivers/net/xilinx_emaclite.c b/drivers/net/xilinx_emaclite.c
index 78ff44c..ea93cf9 100644
--- a/drivers/net/xilinx_emaclite.c
+++ b/drivers/net/xilinx_emaclite.c
@@ -566,9 +566,8 @@
emaclite->bus->read = emaclite_miiphy_read;
emaclite->bus->write = emaclite_miiphy_write;
emaclite->bus->priv = emaclite;
- strcpy(emaclite->bus->name, "emaclite");
- ret = mdio_register(emaclite->bus);
+ ret = mdio_register_seq(emaclite->bus, dev->seq);
if (ret)
return ret;
diff --git a/drivers/net/zynq_gem.c b/drivers/net/zynq_gem.c
index 526eac6..d2e5e7c 100644
--- a/drivers/net/zynq_gem.c
+++ b/drivers/net/zynq_gem.c
@@ -647,9 +647,8 @@
priv->bus->read = zynq_gem_miiphy_read;
priv->bus->write = zynq_gem_miiphy_write;
priv->bus->priv = priv;
- strcpy(priv->bus->name, "gem");
- ret = mdio_register(priv->bus);
+ ret = mdio_register_seq(priv->bus, dev->seq);
if (ret)
return ret;
diff --git a/drivers/pinctrl/nxp/Kconfig b/drivers/pinctrl/nxp/Kconfig
index 35640f0..238f77d 100644
--- a/drivers/pinctrl/nxp/Kconfig
+++ b/drivers/pinctrl/nxp/Kconfig
@@ -1,6 +1,20 @@
config PINCTRL_IMX
bool
+config PINCTRL_IMX5
+ bool "IMX5 pinctrl driver"
+ depends on ARCH_MX5 && PINCTRL_FULL
+ select DEVRES
+ select PINCTRL_IMX
+ help
+ Say Y here to enable the imx5 pinctrl driver
+
+ This provides a simple pinctrl driver for i.MX 53SoC familiy,
+ i.MX53. This feature depends on device tree
+ configuration. This driver is different from the linux one,
+ this is a simple implementation, only parses the 'fsl,pins'
+ property and configure related registers.
+
config PINCTRL_IMX6
bool "IMX6 pinctrl driver"
depends on ARCH_MX6 && PINCTRL_FULL
diff --git a/drivers/pinctrl/nxp/Makefile b/drivers/pinctrl/nxp/Makefile
index 0ee7f2f..e0f7325 100644
--- a/drivers/pinctrl/nxp/Makefile
+++ b/drivers/pinctrl/nxp/Makefile
@@ -1,3 +1,4 @@
obj-$(CONFIG_PINCTRL_IMX) += pinctrl-imx.o
+obj-$(CONFIG_PINCTRL_IMX5) += pinctrl-imx5.o
obj-$(CONFIG_PINCTRL_IMX6) += pinctrl-imx6.o
obj-$(CONFIG_PINCTRL_IMX7) += pinctrl-imx7.o
diff --git a/drivers/pinctrl/nxp/pinctrl-imx5.c b/drivers/pinctrl/nxp/pinctrl-imx5.c
new file mode 100644
index 0000000..6942f39
--- /dev/null
+++ b/drivers/pinctrl/nxp/pinctrl-imx5.c
@@ -0,0 +1,44 @@
+
+/*
+ * Copyright (C) 2016 Peng Fan <van.freenix@gmail.com>
+ *
+ * SPDX-License-Identifier: GPL-2.0+
+ */
+
+#include <dm/device.h>
+#include <dm/pinctrl.h>
+
+#include "pinctrl-imx.h"
+
+static struct imx_pinctrl_soc_info imx5_pinctrl_soc_info;
+
+static int imx5_pinctrl_probe(struct udevice *dev)
+{
+ struct imx_pinctrl_soc_info *info =
+ (struct imx_pinctrl_soc_info *)dev_get_driver_data(dev);
+
+ return imx_pinctrl_probe(dev, info);
+}
+
+static const struct udevice_id imx5_pinctrl_match[] = {
+ {
+ .compatible = "fsl,imx53-iomuxc",
+ .data = (ulong)&imx5_pinctrl_soc_info
+ },
+ {
+ .compatible = "fsl,imx53-iomuxc-gpr",
+ .data = (ulong)&imx5_pinctrl_soc_info
+ },
+ { /* sentinel */ }
+};
+
+U_BOOT_DRIVER(imx5_pinctrl) = {
+ .name = "imx5-pinctrl",
+ .id = UCLASS_PINCTRL,
+ .of_match = of_match_ptr(imx5_pinctrl_match),
+ .probe = imx5_pinctrl_probe,
+ .remove = imx_pinctrl_remove,
+ .priv_auto_alloc_size = sizeof(struct imx_pinctrl_priv),
+ .ops = &imx_pinctrl_ops,
+ .flags = DM_FLAG_PRE_RELOC,
+};
diff --git a/drivers/pinctrl/nxp/pinctrl-imx6.c b/drivers/pinctrl/nxp/pinctrl-imx6.c
index 32b4754..4488b16 100644
--- a/drivers/pinctrl/nxp/pinctrl-imx6.c
+++ b/drivers/pinctrl/nxp/pinctrl-imx6.c
@@ -28,6 +28,8 @@
{ .compatible = "fsl,imx6q-iomuxc", .data = (ulong)&imx6_pinctrl_soc_info },
{ .compatible = "fsl,imx6dl-iomuxc", .data = (ulong)&imx6_pinctrl_soc_info },
{ .compatible = "fsl,imx6sl-iomuxc", .data = (ulong)&imx6_pinctrl_soc_info },
+ { .compatible = "fsl,imx6sll-iomuxc-snvs", .data = (ulong)&imx6_snvs_pinctrl_soc_info },
+ { .compatible = "fsl,imx6sll-iomuxc", .data = (ulong)&imx6_pinctrl_soc_info },
{ .compatible = "fsl,imx6sx-iomuxc", .data = (ulong)&imx6_pinctrl_soc_info },
{ .compatible = "fsl,imx6ul-iomuxc", .data = (ulong)&imx6_pinctrl_soc_info },
{ .compatible = "fsl,imx6ull-iomuxc-snvs", .data = (ulong)&imx6_snvs_pinctrl_soc_info },
diff --git a/drivers/serial/Kconfig b/drivers/serial/Kconfig
index 620dd82..b26ada3 100644
--- a/drivers/serial/Kconfig
+++ b/drivers/serial/Kconfig
@@ -325,7 +325,7 @@
config MXC_UART
bool "IMX serial port support"
- depends on MX6
+ depends on MX5 || MX6
help
If you have a machine based on a Motorola IMX CPU you
can enable its onboard serial port by enabling this option.
diff --git a/drivers/serial/ns16550.c b/drivers/serial/ns16550.c
index 6e9b946..9b423a5 100644
--- a/drivers/serial/ns16550.c
+++ b/drivers/serial/ns16550.c
@@ -121,6 +121,13 @@
return serial_in_shift(addr + plat->reg_offset, plat->reg_shift);
}
+static u32 ns16550_getfcr(NS16550_t port)
+{
+ struct ns16550_platdata *plat = port->plat;
+
+ return plat->fcr;
+}
+
/* We can clean these up once everything is moved to driver model */
#define serial_out(value, addr) \
ns16550_writeb(com_port, \
@@ -128,6 +135,11 @@
#define serial_in(addr) \
ns16550_readb(com_port, \
(unsigned char *)addr - (unsigned char *)com_port)
+#else
+static u32 ns16550_getfcr(NS16550_t port)
+{
+ return UART_FCRVAL;
+}
#endif
int ns16550_calc_divisor(NS16550_t port, int clock, int baudrate)
@@ -171,7 +183,7 @@
serial_out(0x7, &com_port->mdr1); /* mode select reset TL16C750*/
#endif
serial_out(UART_MCRVAL, &com_port->mcr);
- serial_out(UART_FCRVAL, &com_port->fcr);
+ serial_out(ns16550_getfcr(com_port), &com_port->fcr);
if (baud_divisor != -1)
NS16550_setbrg(com_port, baud_divisor);
#if defined(CONFIG_OMAP) || \
@@ -192,7 +204,7 @@
serial_out(CONFIG_SYS_NS16550_IER, &com_port->ier);
NS16550_setbrg(com_port, 0);
serial_out(UART_MCRVAL, &com_port->mcr);
- serial_out(UART_FCRVAL, &com_port->fcr);
+ serial_out(ns16550_getfcr(com_port), &com_port->fcr);
NS16550_setbrg(com_port, baud_divisor);
}
#endif /* CONFIG_NS16550_MIN_FUNCTIONS */
@@ -348,10 +360,18 @@
return 0;
}
+#if CONFIG_IS_ENABLED(OF_CONTROL)
+enum {
+ PORT_NS16550 = 0,
+ PORT_JZ4780,
+};
+#endif
+
#if CONFIG_IS_ENABLED(OF_CONTROL) && !CONFIG_IS_ENABLED(OF_PLATDATA)
int ns16550_serial_ofdata_to_platdata(struct udevice *dev)
{
struct ns16550_platdata *plat = dev->platdata;
+ const u32 port_type = dev_get_driver_data(dev);
fdt_addr_t addr;
struct clk clk;
int err;
@@ -420,6 +440,10 @@
return -EINVAL;
}
+ plat->fcr = UART_FCRVAL;
+ if (port_type == PORT_JZ4780)
+ plat->fcr |= UART_FCR_UME;
+
return 0;
}
#endif
@@ -439,16 +463,17 @@
* compatible string to your dts.
*/
static const struct udevice_id ns16550_serial_ids[] = {
- { .compatible = "ns16550" },
- { .compatible = "ns16550a" },
- { .compatible = "nvidia,tegra20-uart" },
- { .compatible = "snps,dw-apb-uart" },
- { .compatible = "ti,omap2-uart" },
- { .compatible = "ti,omap3-uart" },
- { .compatible = "ti,omap4-uart" },
- { .compatible = "ti,am3352-uart" },
- { .compatible = "ti,am4372-uart" },
- { .compatible = "ti,dra742-uart" },
+ { .compatible = "ns16550", .data = PORT_NS16550 },
+ { .compatible = "ns16550a", .data = PORT_NS16550 },
+ { .compatible = "ingenic,jz4780-uart", .data = PORT_JZ4780 },
+ { .compatible = "nvidia,tegra20-uart", .data = PORT_NS16550 },
+ { .compatible = "snps,dw-apb-uart", .data = PORT_NS16550 },
+ { .compatible = "ti,omap2-uart", .data = PORT_NS16550 },
+ { .compatible = "ti,omap3-uart", .data = PORT_NS16550 },
+ { .compatible = "ti,omap4-uart", .data = PORT_NS16550 },
+ { .compatible = "ti,am3352-uart", .data = PORT_NS16550 },
+ { .compatible = "ti,am4372-uart", .data = PORT_NS16550 },
+ { .compatible = "ti,dra742-uart", .data = PORT_NS16550 },
{}
};
#endif
diff --git a/drivers/video/Kconfig b/drivers/video/Kconfig
index 577e6d7..2069576 100644
--- a/drivers/video/Kconfig
+++ b/drivers/video/Kconfig
@@ -443,6 +443,13 @@
model. Video drivers typically provide a colour text console and
cursor.
+config VIDEO_IPUV3
+ bool "i.MX IPUv3 Core video support"
+ depends on VIDEO && MX6
+ help
+ This enables framebuffer driver for i.MX processors working
+ on the IPUv3(Image Processing Unit) internal graphic processor.
+
config CFB_CONSOLE
bool "Enable colour frame buffer console"
depends on VIDEO
diff --git a/include/ahci.h b/include/ahci.h
index a956c6f..4876b41 100644
--- a/include/ahci.h
+++ b/include/ahci.h
@@ -145,7 +145,7 @@
};
struct ahci_probe_ent {
-#ifdef CONFIG_DM_PCI
+#if defined(CONFIG_DM_PCI) || defined(CONFIG_DM_SCSI)
struct udevice *dev;
#else
pci_dev_t dev;
diff --git a/include/configs/apalis_imx6.h b/include/configs/apalis_imx6.h
new file mode 100644
index 0000000..d3af2da
--- /dev/null
+++ b/include/configs/apalis_imx6.h
@@ -0,0 +1,337 @@
+/*
+ * Copyright 2013-2015 Toradex, Inc.
+ *
+ * Configuration settings for the Toradex Apalis iMX6
+ *
+ * SPDX-License-Identifier: GPL-2.0+
+ */
+
+#ifndef __CONFIG_H
+#define __CONFIG_H
+
+#include "mx6_common.h"
+#define CONFIG_SYS_THUMB_BUILD
+
+#undef CONFIG_DISPLAY_BOARDINFO
+#define CONFIG_DISPLAY_BOARDINFO_LATE /* Calls show_board_info() */
+
+#define CONFIG_MACH_TYPE 4886
+
+#define CONFIG_SYS_GENERIC_BOARD
+
+#include <asm/arch/imx-regs.h>
+#include <asm/imx-common/gpio.h>
+
+#ifdef CONFIG_SPL
+#include "imx6_spl.h"
+#define CONFIG_SPL_PAD_TO 0x11000 /* 4k IVT/DCD, 64k SPL */
+#endif
+
+#define CONFIG_CMDLINE_TAG
+#define CONFIG_SETUP_MEMORY_TAGS
+#define CONFIG_INITRD_TAG
+#define CONFIG_REVISION_TAG
+#define CONFIG_SERIAL_TAG
+
+/* Size of malloc() pool */
+#define CONFIG_SYS_MALLOC_LEN (32 * 1024 * 1024)
+
+#define CONFIG_BOARD_EARLY_INIT_F
+#define CONFIG_BOARD_LATE_INIT
+#define CONFIG_MISC_INIT_R
+
+#define CONFIG_MXC_UART
+#define CONFIG_MXC_UART_BASE UART1_BASE
+
+/* Make the HW version stuff available in U-Boot env */
+#define CONFIG_VERSION_VARIABLE /* ver environment variable */
+#define CONFIG_ENV_VARS_UBOOT_CONFIG
+#define CONFIG_ENV_VARS_UBOOT_RUNTIME_CONFIG
+
+/* I2C Configs */
+#define CONFIG_SYS_I2C
+#define CONFIG_SYS_I2C_MXC
+#define CONFIG_SYS_I2C_MXC_I2C1 /* enable I2C bus 1 */
+#define CONFIG_SYS_I2C_MXC_I2C2 /* enable I2C bus 2 */
+#define CONFIG_SYS_I2C_MXC_I2C3 /* enable I2C bus 3 */
+#define CONFIG_SYS_I2C_SPEED 100000
+
+/* OCOTP Configs */
+#define CONFIG_CMD_FUSE
+#ifdef CONFIG_CMD_FUSE
+#define CONFIG_MXC_OCOTP
+#endif
+
+/* MMC Configs */
+#define CONFIG_FSL_ESDHC
+#define CONFIG_FSL_USDHC
+#define CONFIG_SYS_FSL_ESDHC_ADDR 0
+#define CONFIG_SYS_FSL_USDHC_NUM 3
+
+#define CONFIG_SUPPORT_EMMC_BOOT /* eMMC specific */
+#define CONFIG_MMC
+#define CONFIG_GENERIC_MMC
+#define CONFIG_BOUNCE_BUFFER
+#define CONFIG_FAT_WRITE
+#define CONFIG_DOS_PARTITION
+
+#ifdef CONFIG_MX6Q
+#define CONFIG_CMD_SATA
+#endif
+
+/*
+ * SATA Configs
+ */
+#ifdef CONFIG_CMD_SATA
+#define CONFIG_DWC_AHSATA
+#define CONFIG_SYS_SATA_MAX_DEVICE 1
+#define CONFIG_DWC_AHSATA_PORT_ID 0
+#define CONFIG_DWC_AHSATA_BASE_ADDR SATA_ARB_BASE_ADDR
+#define CONFIG_LBA48
+#define CONFIG_LIBATA
+#endif
+
+/* Network */
+#define CONFIG_FEC_MXC
+#define CONFIG_MII
+#define IMX_FEC_BASE ENET_BASE_ADDR
+#define CONFIG_FEC_XCV_TYPE RGMII
+#define CONFIG_ETHPRIME "FEC"
+#define CONFIG_FEC_MXC_PHYADDR 6
+#define CONFIG_PHYLIB
+#define CONFIG_PHY_MICREL
+#define CONFIG_PHY_MICREL_KSZ9031
+#define CONFIG_IP_DEFRAG
+#define CONFIG_TFTP_BLOCKSIZE 4096
+#define CONFIG_TFTP_TSIZE
+
+/* USB Configs */
+/* Host */
+#define CONFIG_USB_HOST_ETHER
+#define CONFIG_USB_MAX_CONTROLLER_COUNT 2
+#define CONFIG_EHCI_HCD_INIT_AFTER_RESET /* For OTG port */
+#define CONFIG_MXC_USB_PORTSC (PORT_PTS_UTMI | PORT_PTS_PTW)
+#define CONFIG_MXC_USB_FLAGS 0
+#define CONFIG_USB_KEYBOARD
+#ifdef CONFIG_USB_KEYBOARD
+#define CONFIG_SYS_USB_EVENT_POLL
+#endif /* CONFIG_USB_KEYBOARD */
+/* Client */
+#define CONFIG_USB_GADGET_VBUS_DRAW 2
+#define CONFIG_USBD_HS
+
+#define CONFIG_USB_GADGET_MASS_STORAGE
+#define CONFIG_USB_FUNCTION_MASS_STORAGE
+#define CONFIG_G_DNL_MANUFACTURER "Toradex"
+/* USB DFU */
+#define CONFIG_DFU_MMC
+
+/* Miscellaneous commands */
+#define CONFIG_CMD_BMODE
+#define CONFIG_MXC_GPIO
+
+/* Framebuffer and LCD */
+#define CONFIG_VIDEO_IPUV3
+#define CONFIG_SYS_CONSOLE_IS_IN_ENV
+#define CONFIG_SYS_CONSOLE_OVERWRITE_ROUTINE
+#define CONFIG_VIDEO_BMP_RLE8
+#define CONFIG_SPLASH_SCREEN
+#define CONFIG_SPLASH_SCREEN_ALIGN
+#define CONFIG_BMP_16BPP
+#define CONFIG_VIDEO_LOGO
+#define CONFIG_VIDEO_BMP_LOGO
+#define CONFIG_IPUV3_CLK 260000000
+#define CONFIG_CMD_HDMIDETECT
+#define CONFIG_CONSOLE_MUX
+#define CONFIG_IMX_HDMI
+#define CONFIG_IMX_VIDEO_SKIP
+#define CONFIG_CMD_BMP
+
+/* allow to overwrite serial and ethaddr */
+#define CONFIG_ENV_OVERWRITE
+#define CONFIG_CONS_INDEX 1
+#define CONFIG_BAUDRATE 115200
+
+/* Command definition */
+#undef CONFIG_CMD_LOADB
+#undef CONFIG_CMD_LOADS
+#undef CONFIG_CMD_NFS
+#undef CONFIG_CMD_FLASH
+
+#undef CONFIG_IPADDR
+#define CONFIG_IPADDR 192.168.10.2
+#define CONFIG_NETMASK 255.255.255.0
+#undef CONFIG_SERVERIP
+#define CONFIG_SERVERIP 192.168.10.1
+
+#define CONFIG_LOADADDR 0x12000000
+#define CONFIG_SYS_TEXT_BASE 0x17800000
+
+#ifdef CONFIG_CMD_SATA
+#define CONFIG_DRIVE_SATA "sata "
+#else
+#define CONFIG_DRIVE_SATA
+#endif
+
+#ifdef CONFIG_CMD_MMC
+#define CONFIG_DRIVE_MMC "mmc "
+#else
+#define CONFIG_DRIVE_MMC
+#endif
+
+#define CONFIG_DRIVE_TYPES CONFIG_DRIVE_SATA CONFIG_DRIVE_MMC
+
+#define DFU_ALT_EMMC_INFO \
+ "u-boot.imx raw 0x2 0x3ff mmcpart 0;" \
+ "boot part 0 1;" \
+ "rootfs part 0 2;" \
+ "uImage fat 0 1;" \
+ "imx6q-colibri-eval-v3.dtb fat 0 1;" \
+ "imx6q-colibri-cam-eval-v3.dtb fat 0 1"
+
+#define EMMC_BOOTCMD \
+ "emmcargs=ip=off root=/dev/mmcblk0p2 rw,noatime rootfstype=ext3 " \
+ "rootwait\0" \
+ "emmcboot=run setup; " \
+ "setenv bootargs ${defargs} ${emmcargs} ${setupargs} " \
+ "${vidargs}; echo Booting from internal eMMC chip...; " \
+ "run emmcdtbload; load mmc 0:1 ${kernel_addr_r} " \
+ "${boot_file} && run fdt_fixup && " \
+ "bootm ${kernel_addr_r} ${dtbparam}\0" \
+ "emmcdtbload=setenv dtbparam; load mmc 0:1 ${fdt_addr_r} " \
+ "${fdt_file} && setenv dtbparam \" - ${fdt_addr_r}\" && true\0"
+
+#define MEM_LAYOUT_ENV_SETTINGS \
+ "fdt_addr_r=0x12000000\0" \
+ "fdt_high=0xffffffff\0" \
+ "initrd_high=0xffffffff\0" \
+ "kernel_addr_r=0x11000000\0" \
+ "ramdisk_addr_r=0x12100000\0"
+
+#define NFS_BOOTCMD \
+ "nfsargs=ip=:::::eth0:on root=/dev/nfs rw\0" \
+ "nfsboot=run setup; " \
+ "setenv bootargs ${defargs} ${nfsargs} ${setupargs} " \
+ "${vidargs}; echo Booting via DHCP/TFTP/NFS...; " \
+ "run nfsdtbload; dhcp ${kernel_addr_r} " \
+ "&& run fdt_fixup && bootm ${kernel_addr_r} ${dtbparam}\0" \
+ "nfsdtbload=setenv dtbparam; tftp ${fdt_addr_r} ${fdt_file} " \
+ "&& setenv dtbparam \" - ${fdt_addr_r}\" && true\0"
+
+#define SD_BOOTCMD \
+ "sdargs=ip=off root=/dev/mmcblk1p2 rw,noatime rootfstype=ext3 " \
+ "rootwait\0" \
+ "sdboot=run setup; " \
+ "setenv bootargs ${defargs} ${sdargs} ${setupargs} " \
+ "${vidargs}; echo Booting from SD card; " \
+ "run sddtbload; load mmc 1:1 ${kernel_addr_r} " \
+ "${boot_file} && run fdt_fixup && " \
+ "bootm ${kernel_addr_r} ${dtbparam}\0" \
+ "sddtbload=setenv dtbparam; load mmc 1:1 ${fdt_addr_r} " \
+ "${fdt_file} && setenv dtbparam \" - ${fdt_addr_r}\" && true\0"
+
+#define USB_BOOTCMD \
+ "usbargs=ip=off root=/dev/sda2 rw,noatime rootfstype=ext3 " \
+ "rootwait\0" \
+ "usbboot=run setup; setenv bootargs ${defargs} ${setupargs} " \
+ "${usbargs} ${vidargs}; echo Booting from USB stick...; " \
+ "usb start && run usbdtbload; load usb 0:1 ${kernel_addr_r} " \
+ "${boot_file} && run fdt_fixup && " \
+ "bootm ${kernel_addr_r} ${dtbparam}\0" \
+ "usbdtbload=setenv dtbparam; load usb 0:1 ${fdt_addr_r} " \
+ "${fdt_file} && setenv dtbparam \" - ${fdt_addr_r}\" && true\0"
+
+#ifndef CONFIG_TDX_APALIS_IMX6_V1_0
+#define FDT_FILE "imx6q-apalis-eval.dtb"
+#define FDT_FILE_V1_0 "imx6q-apalis_v1_0-eval.dtb"
+#else
+#define FDT_FILE "imx6q-apalis_v1_0-eval.dtb"
+#endif
+#define CONFIG_EXTRA_ENV_SETTINGS \
+ "bootcmd=run emmcboot ; echo ; echo emmcboot failed ; " \
+ "run nfsboot ; echo ; echo nfsboot failed ; " \
+ "usb start ;" \
+ "setenv stdout serial,vga ; setenv stdin serial,usbkbd\0" \
+ "boot_file=uImage\0" \
+ "console=ttymxc0\0" \
+ "defargs=enable_wait_mode=off vmalloc=400M\0" \
+ "dfu_alt_info=" DFU_ALT_EMMC_INFO "\0" \
+ EMMC_BOOTCMD \
+ "fdt_file=" FDT_FILE "\0" \
+ "fdt_fixup=;\0" \
+ MEM_LAYOUT_ENV_SETTINGS \
+ NFS_BOOTCMD \
+ SD_BOOTCMD \
+ "setethupdate=if env exists ethaddr; then; else setenv ethaddr " \
+ "00:14:2d:00:00:00; fi; tftpboot ${loadaddr} " \
+ "flash_eth.img && source ${loadaddr}\0" \
+ "setsdupdate=setenv interface mmc; setenv drive 1; mmc rescan; load " \
+ "${interface} ${drive}:1 ${loadaddr} flash_blk.img && " \
+ "source ${loadaddr}\0" \
+ "setup=setenv setupargs fec_mac=${ethaddr} " \
+ "consoleblank=0 no_console_suspend=1 console=tty1 " \
+ "console=${console},${baudrate}n8\0 " \
+ "setupdate=run setsdupdate || run setusbupdate || run setethupdate\0" \
+ "setusbupdate=usb start && setenv interface usb; setenv drive 0; " \
+ "load ${interface} ${drive}:1 ${loadaddr} flash_blk.img && " \
+ "source ${loadaddr}\0" \
+ "splashpos=m,m\0" \
+ "vidargs=mxc_hdmi.only_cea=1 " \
+ "video=mxcfb0:dev=hdmi,1920x1080M@60,if=RGB24 " \
+ "video=mxcfb1:off video=mxcfb2:off video=mxcfb3:off " \
+ "fbmem=32M\0 "
+
+/* Miscellaneous configurable options */
+#define CONFIG_SYS_LONGHELP
+#define CONFIG_AUTO_COMPLETE
+#undef CONFIG_SYS_CBSIZE
+#define CONFIG_SYS_CBSIZE 1024
+#undef CONFIG_SYS_MAXARGS
+#define CONFIG_SYS_MAXARGS 48
+
+#define CONFIG_SYS_ALT_MEMTEST
+#define CONFIG_SYS_MEMTEST_START 0x10000000
+#define CONFIG_SYS_MEMTEST_END 0x10010000
+#define CONFIG_SYS_MEMTEST_SCRATCH 0x10800000
+
+#define CONFIG_SYS_LOAD_ADDR CONFIG_LOADADDR
+
+#define CONFIG_CMDLINE_EDITING
+
+/* Physical Memory Map */
+#define CONFIG_NR_DRAM_BANKS 1
+#define PHYS_SDRAM MMDC0_ARB_BASE_ADDR
+
+#define CONFIG_SYS_SDRAM_BASE PHYS_SDRAM
+#define CONFIG_SYS_INIT_RAM_ADDR IRAM_BASE_ADDR
+#define CONFIG_SYS_INIT_RAM_SIZE IRAM_SIZE
+
+#define CONFIG_SYS_INIT_SP_OFFSET \
+ (CONFIG_SYS_INIT_RAM_SIZE - GENERATED_GBL_DATA_SIZE)
+#define CONFIG_SYS_INIT_SP_ADDR \
+ (CONFIG_SYS_INIT_RAM_ADDR + CONFIG_SYS_INIT_SP_OFFSET)
+
+/* FLASH and environment organization */
+#define CONFIG_SYS_NO_FLASH
+
+#define CONFIG_ENV_SIZE (8 * 1024)
+
+#define CONFIG_ENV_IS_IN_MMC
+
+#if defined(CONFIG_ENV_IS_IN_MMC)
+/* Environment in eMMC, before config block at the end of 1st "boot sector" */
+#define CONFIG_ENV_OFFSET (-CONFIG_ENV_SIZE + \
+ CONFIG_TDX_CFG_BLOCK_OFFSET)
+#define CONFIG_SYS_MMC_ENV_DEV 0
+#define CONFIG_SYS_MMC_ENV_PART 1
+#endif
+
+#define CONFIG_OF_SYSTEM_SETUP
+
+#define CONFIG_CMD_TIME
+
+#define CONFIG_SUPPORT_RAW_INITRD
+
+#define CONFIG_CRC32_VERIFY
+
+#endif /* __CONFIG_H */
diff --git a/include/configs/colibri_imx6.h b/include/configs/colibri_imx6.h
new file mode 100644
index 0000000..86ed4d2
--- /dev/null
+++ b/include/configs/colibri_imx6.h
@@ -0,0 +1,305 @@
+/*
+ * Copyright 2013-2015 Toradex, Inc.
+ *
+ * Configuration settings for the Toradex Colibri iMX6
+ *
+ * SPDX-License-Identifier: GPL-2.0+
+ */
+
+#ifndef __CONFIG_H
+#define __CONFIG_H
+
+#include "mx6_common.h"
+#define CONFIG_SYS_THUMB_BUILD
+
+#undef CONFIG_DISPLAY_BOARDINFO
+#define CONFIG_DISPLAY_BOARDINFO_LATE /* Calls show_board_info() */
+
+#define CONFIG_SYS_GENERIC_BOARD
+
+#include <asm/arch/imx-regs.h>
+#include <asm/imx-common/gpio.h>
+
+#ifdef CONFIG_SPL
+#include "imx6_spl.h"
+#define CONFIG_SPL_PAD_TO 0x11000 /* 4k IVT/DCD, 64k SPL */
+#endif
+
+#define CONFIG_CMDLINE_TAG
+#define CONFIG_SETUP_MEMORY_TAGS
+#define CONFIG_INITRD_TAG
+#define CONFIG_REVISION_TAG
+#define CONFIG_SERIAL_TAG
+
+/* Size of malloc() pool */
+#define CONFIG_SYS_MALLOC_LEN (32 * 1024 * 1024)
+
+#define CONFIG_BOARD_EARLY_INIT_F
+#define CONFIG_BOARD_LATE_INIT
+#define CONFIG_MISC_INIT_R
+
+#define CONFIG_MXC_UART
+#define CONFIG_MXC_UART_BASE UART1_BASE
+
+/* Make the HW version stuff available in U-Boot env */
+#define CONFIG_VERSION_VARIABLE /* ver environment variable */
+#define CONFIG_ENV_VARS_UBOOT_CONFIG
+#define CONFIG_ENV_VARS_UBOOT_RUNTIME_CONFIG
+
+/* I2C Configs */
+#define CONFIG_SYS_I2C
+#define CONFIG_SYS_I2C_MXC
+#define CONFIG_SYS_I2C_MXC_I2C1 /* enable I2C bus 1 */
+#define CONFIG_SYS_I2C_MXC_I2C2 /* enable I2C bus 2 */
+#define CONFIG_SYS_I2C_MXC_I2C3 /* enable I2C bus 3 */
+#define CONFIG_SYS_I2C_SPEED 100000
+
+/* OCOTP Configs */
+#define CONFIG_CMD_FUSE
+#ifdef CONFIG_CMD_FUSE
+#define CONFIG_MXC_OCOTP
+#endif
+
+/* MMC Configs */
+#define CONFIG_FSL_ESDHC
+#define CONFIG_FSL_USDHC
+#define CONFIG_SYS_FSL_ESDHC_ADDR 0
+#define CONFIG_SYS_FSL_USDHC_NUM 2
+
+#define CONFIG_SUPPORT_EMMC_BOOT /* eMMC specific */
+#define CONFIG_MMC
+#define CONFIG_GENERIC_MMC
+#define CONFIG_BOUNCE_BUFFER
+#define CONFIG_FAT_WRITE
+#define CONFIG_DOS_PARTITION
+
+/* Network */
+#define CONFIG_FEC_MXC
+#define CONFIG_MII
+#define IMX_FEC_BASE ENET_BASE_ADDR
+#define CONFIG_FEC_XCV_TYPE RMII
+#define CONFIG_ETHPRIME "FEC"
+#define CONFIG_FEC_MXC_PHYADDR 1
+#define CONFIG_PHYLIB
+#define CONFIG_PHY_MICREL
+#define CONFIG_IP_DEFRAG
+#define CONFIG_TFTP_BLOCKSIZE 16352
+#define CONFIG_TFTP_TSIZE
+
+/* USB Configs */
+/* Host */
+#define CONFIG_USB_HOST_ETHER
+#define CONFIG_USB_MAX_CONTROLLER_COUNT 2
+#define CONFIG_EHCI_HCD_INIT_AFTER_RESET /* For OTG port */
+#define CONFIG_MXC_USB_PORTSC (PORT_PTS_UTMI | PORT_PTS_PTW)
+#define CONFIG_MXC_USB_FLAGS 0
+#define CONFIG_USB_KEYBOARD
+#ifdef CONFIG_USB_KEYBOARD
+#define CONFIG_SYS_USB_EVENT_POLL
+#endif /* CONFIG_USB_KEYBOARD */
+/* Client */
+#define CONFIG_USB_GADGET_VBUS_DRAW 2
+#define CONFIG_USBD_HS
+
+#define CONFIG_USB_GADGET_MASS_STORAGE
+#define CONFIG_USB_FUNCTION_MASS_STORAGE
+#define CONFIG_G_DNL_MANUFACTURER "Toradex"
+/* USB DFU */
+#define CONFIG_DFU_MMC
+
+/* Miscellaneous commands */
+#define CONFIG_CMD_BMODE
+#define CONFIG_MXC_GPIO
+
+/* Framebuffer and LCD */
+#define CONFIG_VIDEO_IPUV3
+#define CONFIG_SYS_CONSOLE_IS_IN_ENV
+#define CONFIG_SYS_CONSOLE_OVERWRITE_ROUTINE
+#define CONFIG_VIDEO_BMP_RLE8
+#define CONFIG_SPLASH_SCREEN
+#define CONFIG_SPLASH_SCREEN_ALIGN
+#define CONFIG_BMP_16BPP
+#define CONFIG_VIDEO_LOGO
+#define CONFIG_VIDEO_BMP_LOGO
+#define CONFIG_IPUV3_CLK 260000000
+#define CONFIG_CMD_HDMIDETECT
+#define CONFIG_CONSOLE_MUX
+#define CONFIG_IMX_HDMI
+#define CONFIG_IMX_VIDEO_SKIP
+#define CONFIG_CMD_BMP
+
+/* allow to overwrite serial and ethaddr */
+#define CONFIG_ENV_OVERWRITE
+#define CONFIG_CONS_INDEX 1
+#define CONFIG_BAUDRATE 115200
+
+/* Command definition */
+#undef CONFIG_CMD_LOADB
+#undef CONFIG_CMD_LOADS
+#undef CONFIG_CMD_NFS
+#undef CONFIG_CMD_FLASH
+
+#undef CONFIG_IPADDR
+#define CONFIG_IPADDR 192.168.10.2
+#define CONFIG_NETMASK 255.255.255.0
+#undef CONFIG_SERVERIP
+#define CONFIG_SERVERIP 192.168.10.1
+
+#define CONFIG_LOADADDR 0x12000000
+#define CONFIG_SYS_TEXT_BASE 0x17800000
+
+#ifdef CONFIG_CMD_MMC
+#define CONFIG_DRIVE_MMC "mmc "
+#else
+#define CONFIG_DRIVE_MMC
+#endif
+
+#define CONFIG_DRIVE_TYPES CONFIG_DRIVE_MMC
+
+#define DFU_ALT_EMMC_INFO \
+ "u-boot.imx raw 0x2 0x3ff mmcpart 0;" \
+ "boot part 0 1;" \
+ "rootfs part 0 2;" \
+ "uImage fat 0 1;" \
+ "imx6q-colibri-eval-v3.dtb fat 0 1;" \
+ "imx6q-colibri-cam-eval-v3.dtb fat 0 1"
+
+#define EMMC_BOOTCMD \
+ "emmcargs=ip=off root=/dev/mmcblk0p2 rw,noatime rootfstype=ext3 " \
+ "rootwait\0" \
+ "emmcboot=run setup; " \
+ "setenv bootargs ${defargs} ${emmcargs} ${setupargs} " \
+ "${vidargs}; echo Booting from internal eMMC chip...; " \
+ "run emmcdtbload; load mmc 0:1 ${kernel_addr_r} " \
+ "${boot_file} && run fdt_fixup && " \
+ "bootm ${kernel_addr_r} ${dtbparam}\0" \
+ "emmcdtbload=setenv dtbparam; load mmc 0:1 ${fdt_addr_r} " \
+ "${fdt_file} && setenv dtbparam \" - ${fdt_addr_r}\" && true\0"
+
+#define MEM_LAYOUT_ENV_SETTINGS \
+ "fdt_addr_r=0x12000000\0" \
+ "fdt_high=0xffffffff\0" \
+ "initrd_high=0xffffffff\0" \
+ "kernel_addr_r=0x11000000\0" \
+ "ramdisk_addr_r=0x12100000\0"
+
+#define NFS_BOOTCMD \
+ "nfsargs=ip=:::::eth0:on root=/dev/nfs rw\0" \
+ "nfsboot=run setup; " \
+ "setenv bootargs ${defargs} ${nfsargs} ${setupargs} " \
+ "${vidargs}; echo Booting via DHCP/TFTP/NFS...; " \
+ "run nfsdtbload; dhcp ${kernel_addr_r} " \
+ "&& run fdt_fixup && bootm ${kernel_addr_r} ${dtbparam}\0" \
+ "nfsdtbload=setenv dtbparam; tftp ${fdt_addr_r} ${fdt_file} " \
+ "&& setenv dtbparam \" - ${fdt_addr_r}\" && true\0"
+
+#define SD_BOOTCMD \
+ "sdargs=ip=off root=/dev/mmcblk1p2 rw,noatime rootfstype=ext3 " \
+ "rootwait\0" \
+ "sdboot=run setup; " \
+ "setenv bootargs ${defargs} ${sdargs} ${setupargs} " \
+ "${vidargs}; echo Booting from SD card; " \
+ "run sddtbload; load mmc 1:1 ${kernel_addr_r} " \
+ "${boot_file} && run fdt_fixup && " \
+ "bootm ${kernel_addr_r} ${dtbparam}\0" \
+ "sddtbload=setenv dtbparam; load mmc 1:1 ${fdt_addr_r} " \
+ "${fdt_file} && setenv dtbparam \" - ${fdt_addr_r}\" && true\0"
+
+#define USB_BOOTCMD \
+ "usbargs=ip=off root=/dev/sda2 rw,noatime rootfstype=ext3 " \
+ "rootwait\0" \
+ "usbboot=run setup; setenv bootargs ${defargs} ${setupargs} " \
+ "${usbargs} ${vidargs}; echo Booting from USB stick...; " \
+ "usb start && run usbdtbload; load usb 0:1 ${kernel_addr_r} " \
+ "${boot_file} && run fdt_fixup && " \
+ "bootm ${kernel_addr_r} ${dtbparam}\0" \
+ "usbdtbload=setenv dtbparam; load usb 0:1 ${fdt_addr_r} " \
+ "${fdt_file} && setenv dtbparam \" - ${fdt_addr_r}\" && true\0"
+
+#define FDT_FILE "imx6dl-colibri-eval-v3.dtb"
+#define CONFIG_EXTRA_ENV_SETTINGS \
+ "bootcmd=run emmcboot ; echo ; echo emmcboot failed ; " \
+ "run nfsboot ; echo ; echo nfsboot failed ; " \
+ "usb start ;" \
+ "setenv stdout serial,vga ; setenv stdin serial,usbkbd\0" \
+ "boot_file=uImage\0" \
+ "console=ttymxc0\0" \
+ "defargs=enable_wait_mode=off galcore.contiguousSize=50331648\0" \
+ "dfu_alt_info=" DFU_ALT_EMMC_INFO "\0" \
+ EMMC_BOOTCMD \
+ "fdt_file=" FDT_FILE "\0" \
+ "fdt_fixup=;\0" \
+ MEM_LAYOUT_ENV_SETTINGS \
+ NFS_BOOTCMD \
+ SD_BOOTCMD \
+ "setethupdate=if env exists ethaddr; then; else setenv ethaddr " \
+ "00:14:2d:00:00:00; fi; tftpboot ${loadaddr} " \
+ "flash_eth.img && source ${loadaddr}\0" \
+ "setsdupdate=setenv interface mmc; setenv drive 1; mmc rescan; load " \
+ "${interface} ${drive}:1 ${loadaddr} flash_blk.img && " \
+ "source ${loadaddr}\0" \
+ "setup=setenv setupargs fec_mac=${ethaddr} " \
+ "consoleblank=0 no_console_suspend=1 console=tty1 " \
+ "console=${console},${baudrate}n8\0 " \
+ "setupdate=run setsdupdate || run setusbupdate || run setethupdate\0" \
+ "setusbupdate=usb start && setenv interface usb; setenv drive 0; " \
+ "load ${interface} ${drive}:1 ${loadaddr} flash_blk.img && " \
+ "source ${loadaddr}\0" \
+ "splashpos=m,m\0" \
+ "vidargs=video=mxcfb0:dev=lcd,640x480M@60,if=RGB666 " \
+ "video=mxcfb1:off fbmem=8M\0 "
+
+/* Miscellaneous configurable options */
+#define CONFIG_SYS_LONGHELP
+#define CONFIG_AUTO_COMPLETE
+#undef CONFIG_SYS_CBSIZE
+#define CONFIG_SYS_CBSIZE 1024
+#undef CONFIG_SYS_MAXARGS
+#define CONFIG_SYS_MAXARGS 48
+
+#define CONFIG_SYS_ALT_MEMTEST
+#define CONFIG_SYS_MEMTEST_START 0x10000000
+#define CONFIG_SYS_MEMTEST_END 0x10010000
+#define CONFIG_SYS_MEMTEST_SCRATCH 0x10800000
+
+#define CONFIG_SYS_LOAD_ADDR CONFIG_LOADADDR
+
+#define CONFIG_CMDLINE_EDITING
+
+/* Physical Memory Map */
+#define CONFIG_NR_DRAM_BANKS 1
+#define PHYS_SDRAM MMDC0_ARB_BASE_ADDR
+
+#define CONFIG_SYS_SDRAM_BASE PHYS_SDRAM
+#define CONFIG_SYS_INIT_RAM_ADDR IRAM_BASE_ADDR
+#define CONFIG_SYS_INIT_RAM_SIZE IRAM_SIZE
+
+#define CONFIG_SYS_INIT_SP_OFFSET \
+ (CONFIG_SYS_INIT_RAM_SIZE - GENERATED_GBL_DATA_SIZE)
+#define CONFIG_SYS_INIT_SP_ADDR \
+ (CONFIG_SYS_INIT_RAM_ADDR + CONFIG_SYS_INIT_SP_OFFSET)
+
+/* FLASH and environment organization */
+#define CONFIG_SYS_NO_FLASH
+
+#define CONFIG_ENV_SIZE (8 * 1024)
+
+#define CONFIG_ENV_IS_IN_MMC
+
+#if defined(CONFIG_ENV_IS_IN_MMC)
+/* Environment in eMMC, before config block at the end of 1st "boot sector" */
+#define CONFIG_ENV_OFFSET (-CONFIG_ENV_SIZE + \
+ CONFIG_TDX_CFG_BLOCK_OFFSET)
+#define CONFIG_SYS_MMC_ENV_DEV 0
+#define CONFIG_SYS_MMC_ENV_PART 1
+#endif
+
+#define CONFIG_OF_SYSTEM_SETUP
+
+#define CONFIG_CMD_TIME
+
+#define CONFIG_SUPPORT_RAW_INITRD
+
+#define CONFIG_CRC32_VERIFY
+
+#endif /* __CONFIG_H */
diff --git a/include/configs/colibri_vf.h b/include/configs/colibri_vf.h
index 47dea62..62131c7 100644
--- a/include/configs/colibri_vf.h
+++ b/include/configs/colibri_vf.h
@@ -97,7 +97,7 @@
"${setupargs} ${vidargs}; echo Booting from MMC/SD card...; " \
"load mmc 0:2 ${kernel_addr_r} /boot/${kernel_file} && " \
"load mmc 0:2 ${fdt_addr_r} /boot/${soc}-colibri-${fdt_board}.dtb && " \
- "bootz ${kernel_addr_r} - ${fdt_addr_r}\0" \
+ "run fdt_fixup && bootz ${kernel_addr_r} - ${fdt_addr_r}\0" \
#define NFS_BOOTCMD \
"nfsargs=ip=:::::eth0: root=/dev/nfs\0" \
@@ -106,7 +106,7 @@
"${setupargs} ${vidargs}; echo Booting from NFS...;" \
"dhcp ${kernel_addr_r} && " \
"tftp ${fdt_addr_r} ${soc}-colibri-${fdt_board}.dtb && " \
- "bootz ${kernel_addr_r} - ${fdt_addr_r}\0" \
+ "run fdt_fixup && bootz ${kernel_addr_r} - ${fdt_addr_r}\0" \
#define UBI_BOOTCMD \
"ubiargs=ubi.mtd=ubi root=ubi0:rootfs rootfstype=ubifs " \
@@ -117,7 +117,7 @@
"ubi part ubi && " \
"ubi read ${kernel_addr_r} kernel && " \
"ubi read ${fdt_addr_r} dtb && " \
- "bootz ${kernel_addr_r} - ${fdt_addr_r}\0" \
+ "run fdt_fixup && bootz ${kernel_addr_r} - ${fdt_addr_r}\0" \
#define CONFIG_BOOTCOMMAND "run ubiboot; run sdboot; run nfsboot"
@@ -129,6 +129,7 @@
"kernel_file=zImage\0" \
"fdt_file=${soc}-colibri-${fdt_board}.dtb\0" \
"fdt_board=eval-v3\0" \
+ "fdt_fixup=;\0" \
"defargs=\0" \
"console=ttyLP0\0" \
"setup=setenv setupargs " \
diff --git a/include/configs/imx6qdl_icore.h b/include/configs/imx6qdl_icore.h
index f8a1263..204e96e 100644
--- a/include/configs/imx6qdl_icore.h
+++ b/include/configs/imx6qdl_icore.h
@@ -37,6 +37,7 @@
/* Default environment */
#define CONFIG_EXTRA_ENV_SETTINGS \
"script=boot.scr\0" \
+ "splashpos=m,m\0" \
"image=zImage\0" \
"console=ttymxc3\0" \
"fdt_high=0xffffffff\0" \
@@ -149,6 +150,19 @@
# define CONFIG_PHY_SMSC
#endif
+/* Framebuffer */
+#ifdef CONFIG_VIDEO_IPUV3
+# define CONFIG_IPUV3_CLK 260000000
+# define CONFIG_IMX_VIDEO_SKIP
+
+# define CONFIG_SPLASH_SCREEN
+# define CONFIG_SPLASH_SCREEN_ALIGN
+# define CONFIG_BMP_16BPP
+# define CONFIG_VIDEO_BMP_RLE8
+# define CONFIG_VIDEO_LOGO
+# define CONFIG_VIDEO_BMP_LOGO
+#endif
+
/* SPL */
#ifdef CONFIG_SPL
# ifdef CONFIG_NAND_MXS
diff --git a/include/configs/imx6qdl_icore_rqs.h b/include/configs/imx6qdl_icore_rqs.h
new file mode 100644
index 0000000..0121563
--- /dev/null
+++ b/include/configs/imx6qdl_icore_rqs.h
@@ -0,0 +1,135 @@
+/*
+ * Copyright (C) 2016 Amarula Solutions B.V.
+ * Copyright (C) 2016 Engicam S.r.l.
+ *
+ * Configuration settings for the Engicam i.CoreM6 QDL RQS Starter Kits.
+ *
+ * SPDX-License-Identifier: GPL-2.0+
+ */
+
+#ifndef __IMX6QLD_ICORE_RQS_CONFIG_H
+#define __IMX6QLD_ICORE_RQS_CONFIG_H
+
+#include <linux/sizes.h>
+#include "mx6_common.h"
+
+/* Size of malloc() pool */
+#define CONFIG_SYS_MALLOC_LEN (16 * SZ_1M)
+
+/* Total Size of Environment Sector */
+#define CONFIG_ENV_SIZE SZ_128K
+
+/* Allow to overwrite serial and ethaddr */
+#define CONFIG_ENV_OVERWRITE
+
+/* Environment */
+#ifndef CONFIG_ENV_IS_NOWHERE
+/* Environment in MMC */
+# if defined(CONFIG_ENV_IS_IN_MMC)
+# define CONFIG_ENV_OFFSET 0x100000
+# endif
+#endif
+
+/* Default environment */
+#define CONFIG_EXTRA_ENV_SETTINGS \
+ "script=boot.scr\0" \
+ "image=zImage\0" \
+ "console=ttymxc3\0" \
+ "fdt_high=0xffffffff\0" \
+ "fdt_file=" CONFIG_DEFAULT_FDT_FILE "\0" \
+ "fdt_addr=0x18000000\0" \
+ "boot_fdt=try\0" \
+ "mmcdev=0\0" \
+ "mmcpart=1\0" \
+ "mmcroot=/dev/mmcblk0p2 rootwait rw\0" \
+ "mmcautodetect=yes\0" \
+ "mmcargs=setenv bootargs console=${console},${baudrate} " \
+ "root=${mmcroot}\0" \
+ "loadbootscript=" \
+ "fatload mmc ${mmcdev}:${mmcpart} ${loadaddr} ${script};\0" \
+ "bootscript=echo Running bootscript from mmc ...; " \
+ "source\0" \
+ "loadimage=fatload mmc ${mmcdev}:${mmcpart} ${loadaddr} ${image}\0" \
+ "loadfdt=fatload mmc ${mmcdev}:${mmcpart} ${fdt_addr} ${fdt_file}\0" \
+ "mmcboot=echo Booting from mmc ...; " \
+ "run mmcargs; " \
+ "if test ${boot_fdt} = yes || test ${boot_fdt} = try; then " \
+ "if run loadfdt; then " \
+ "bootz ${loadaddr} - ${fdt_addr}; " \
+ "else " \
+ "if test ${boot_fdt} = try; then " \
+ "bootz; " \
+ "else " \
+ "echo WARN: Cannot load the DT; " \
+ "fi; " \
+ "fi; " \
+ "else " \
+ "bootz; " \
+ "fi\0"
+
+#define CONFIG_BOOTCOMMAND \
+ "mmc dev ${mmcdev};" \
+ "mmc dev ${mmcdev}; if mmc rescan; then " \
+ "if run loadbootscript; then " \
+ "run bootscript; " \
+ "else " \
+ "if run loadimage; then " \
+ "run mmcboot; " \
+ "fi; " \
+ "fi; " \
+ "fi"
+
+/* Miscellaneous configurable options */
+#define CONFIG_SYS_MEMTEST_START 0x80000000
+#define CONFIG_SYS_MEMTEST_END (CONFIG_SYS_MEMTEST_START + 0x8000000)
+
+#define CONFIG_SYS_LOAD_ADDR CONFIG_LOADADDR
+#define CONFIG_SYS_HZ 1000
+
+/* Physical Memory Map */
+#define CONFIG_NR_DRAM_BANKS 1
+#define PHYS_SDRAM MMDC0_ARB_BASE_ADDR
+
+#define CONFIG_SYS_SDRAM_BASE PHYS_SDRAM
+#define CONFIG_SYS_INIT_RAM_ADDR IRAM_BASE_ADDR
+#define CONFIG_SYS_INIT_RAM_SIZE IRAM_SIZE
+
+#define CONFIG_SYS_INIT_SP_OFFSET (CONFIG_SYS_INIT_RAM_SIZE - \
+ GENERATED_GBL_DATA_SIZE)
+#define CONFIG_SYS_INIT_SP_ADDR (CONFIG_SYS_INIT_RAM_ADDR + \
+ CONFIG_SYS_INIT_SP_OFFSET)
+
+/* UART */
+#ifdef CONFIG_MXC_UART
+# define CONFIG_MXC_UART_BASE UART4_BASE
+#endif
+
+/* MMC */
+#ifdef CONFIG_FSL_USDHC
+# define CONFIG_SYS_MMC_ENV_DEV 0
+# define CONFIG_SYS_FSL_USDHC_NUM 1
+# define CONFIG_SYS_FSL_ESDHC_ADDR 0
+#endif
+
+/* Ethernet */
+#ifdef CONFIG_FEC_MXC
+# define CONFIG_FEC_MXC_PHYADDR 3
+# define CONFIG_FEC_XCV_TYPE RGMII
+
+# define CONFIG_MII
+# define CONFIG_PHYLIB
+# define CONFIG_PHY_MICREL
+# define CONFIG_PHY_MICREL_KSZ9021
+#endif
+
+/* SPL */
+#ifdef CONFIG_SPL
+# define CONFIG_SPL_MMC_SUPPORT
+# include "imx6_spl.h"
+# ifdef CONFIG_SPL_BUILD
+# undef CONFIG_DM_GPIO
+# undef CONFIG_DM_MMC
+# endif
+#endif
+
+#endif /* __IMX6QLD_ICORE_RQS_CONFIG_H */
diff --git a/include/configs/imx6ul_geam.h b/include/configs/imx6ul_geam.h
new file mode 100644
index 0000000..48b1120
--- /dev/null
+++ b/include/configs/imx6ul_geam.h
@@ -0,0 +1,165 @@
+/*
+ * Copyright (C) 2016 Amarula Solutions B.V.
+ * Copyright (C) 2016 Engicam S.r.l.
+ *
+ * Configuration settings for the Engicam GEAM6UL Starter Kits.
+ *
+ * SPDX-License-Identifier: GPL-2.0+
+ */
+
+#ifndef __IMX6UL_GEAM_CONFIG_H
+#define __IMX6UL_GEAM_CONFIG_H
+
+#include <linux/sizes.h>
+#include "mx6_common.h"
+
+/* Size of malloc() pool */
+#define CONFIG_SYS_MALLOC_LEN (16 * SZ_1M)
+
+/* Total Size of Environment Sector */
+#define CONFIG_ENV_SIZE SZ_128K
+
+/* Allow to overwrite serial and ethaddr */
+#define CONFIG_ENV_OVERWRITE
+
+/* Environment */
+#ifndef CONFIG_ENV_IS_NOWHERE
+/* Environment in MMC */
+# if defined(CONFIG_ENV_IS_IN_MMC)
+# define CONFIG_ENV_OFFSET 0x100000
+/* Environment in NAND */
+# elif defined(CONFIG_ENV_IS_IN_NAND)
+# define CONFIG_ENV_OFFSET 0x400000
+# define CONFIG_ENV_SECT_SIZE CONFIG_ENV_SIZE
+# endif
+#endif
+
+/* Default environment */
+#define CONFIG_EXTRA_ENV_SETTINGS \
+ "script=boot.scr\0" \
+ "image=zImage\0" \
+ "console=ttymxc0\0" \
+ "fdt_high=0xffffffff\0" \
+ "fdt_file=" CONFIG_DEFAULT_FDT_FILE "\0" \
+ "fdt_addr=0x87800000\0" \
+ "boot_fdt=try\0" \
+ "mmcdev=0\0" \
+ "mmcpart=1\0" \
+ "mmcroot=/dev/mmcblk0p2 rootwait rw\0" \
+ "mmcautodetect=yes\0" \
+ "mmcargs=setenv bootargs console=${console},${baudrate} " \
+ "root=${mmcroot}\0" \
+ "loadbootscript=" \
+ "fatload mmc ${mmcdev}:${mmcpart} ${loadaddr} ${script};\0" \
+ "bootscript=echo Running bootscript from mmc ...; " \
+ "source\0" \
+ "loadimage=fatload mmc ${mmcdev}:${mmcpart} ${loadaddr} ${image}\0" \
+ "loadfdt=fatload mmc ${mmcdev}:${mmcpart} ${fdt_addr} ${fdt_file}\0" \
+ "mmcboot=echo Booting from mmc ...; " \
+ "run mmcargs; " \
+ "if test ${boot_fdt} = yes || test ${boot_fdt} = try; then " \
+ "if run loadfdt; then " \
+ "bootz ${loadaddr} - ${fdt_addr}; " \
+ "else " \
+ "if test ${boot_fdt} = try; then " \
+ "bootz; " \
+ "else " \
+ "echo WARN: Cannot load the DT; " \
+ "fi; " \
+ "fi; " \
+ "else " \
+ "bootz; " \
+ "fi\0"
+
+#define CONFIG_BOOTCOMMAND \
+ "mmc dev ${mmcdev};" \
+ "mmc dev ${mmcdev}; if mmc rescan; then " \
+ "if run loadbootscript; then " \
+ "run bootscript; " \
+ "else " \
+ "if run loadimage; then " \
+ "run mmcboot; " \
+ "fi; " \
+ "fi; " \
+ "fi"
+
+/* Miscellaneous configurable options */
+#define CONFIG_SYS_MEMTEST_START 0x80000000
+#define CONFIG_SYS_MEMTEST_END (CONFIG_SYS_MEMTEST_START + 0x8000000)
+
+#define CONFIG_SYS_LOAD_ADDR CONFIG_LOADADDR
+#define CONFIG_SYS_HZ 1000
+
+/* Physical Memory Map */
+#define CONFIG_NR_DRAM_BANKS 1
+#define PHYS_SDRAM MMDC0_ARB_BASE_ADDR
+
+#define CONFIG_SYS_SDRAM_BASE PHYS_SDRAM
+#define CONFIG_SYS_INIT_RAM_ADDR IRAM_BASE_ADDR
+#define CONFIG_SYS_INIT_RAM_SIZE IRAM_SIZE
+
+#define CONFIG_SYS_INIT_SP_OFFSET (CONFIG_SYS_INIT_RAM_SIZE - \
+ GENERATED_GBL_DATA_SIZE)
+#define CONFIG_SYS_INIT_SP_ADDR (CONFIG_SYS_INIT_RAM_ADDR + \
+ CONFIG_SYS_INIT_SP_OFFSET)
+
+/* UART */
+#ifdef CONFIG_MXC_UART
+# define CONFIG_MXC_UART_BASE UART1_BASE
+#endif
+
+/* MMC */
+#ifdef CONFIG_FSL_USDHC
+# define CONFIG_SYS_MMC_ENV_DEV 0
+# define CONFIG_SYS_FSL_USDHC_NUM 1
+# define CONFIG_SYS_FSL_ESDHC_ADDR USDHC2_BASE_ADDR
+#endif
+
+/* NAND */
+#ifdef CONFIG_NAND_MXS
+# define CONFIG_SYS_MAX_NAND_DEVICE 1
+# define CONFIG_SYS_NAND_BASE 0x40000000
+# define CONFIG_SYS_NAND_5_ADDR_CYCLE
+# define CONFIG_SYS_NAND_ONFI_DETECTION
+# define CONFIG_SYS_NAND_U_BOOT_START CONFIG_SYS_TEXT_BASE
+# define CONFIG_SYS_NAND_U_BOOT_OFFS 0x200000
+
+/* MTD device */
+# define CONFIG_MTD_DEVICE
+# define CONFIG_CMD_MTDPARTS
+# define CONFIG_MTD_PARTITIONS
+# define MTDIDS_DEFAULT "nand0=nand"
+# define MTDPARTS_DEFAULT "mtdparts=nand:2m(spl),2m(uboot)," \
+ "1m(env),4m(kernel),1m(dtb),-(rootfs)"
+
+# define CONFIG_APBH_DMA
+# define CONFIG_APBH_DMA_BURST
+# define CONFIG_APBH_DMA_BURST8
+#endif
+
+/* Ethernet */
+#ifdef CONFIG_FEC_MXC
+# define CONFIG_FEC_MXC_PHYADDR 0
+# define CONFIG_FEC_XCV_TYPE RMII
+
+# define CONFIG_MII
+# define CONFIG_PHYLIB
+# define CONFIG_PHY_SMSC
+#endif
+
+/* SPL */
+#ifdef CONFIG_SPL
+# ifdef CONFIG_NAND_MXS
+# define CONFIG_SPL_NAND_SUPPORT
+# else
+# define CONFIG_SPL_MMC_SUPPORT
+# endif
+
+# include "imx6_spl.h"
+# ifdef CONFIG_SPL_BUILD
+# undef CONFIG_DM_GPIO
+# undef CONFIG_DM_MMC
+# endif
+#endif
+
+#endif /* __IMX6UL_GEAM_CONFIG_H */
diff --git a/include/configs/liteboard.h b/include/configs/liteboard.h
new file mode 100644
index 0000000..a55d767
--- /dev/null
+++ b/include/configs/liteboard.h
@@ -0,0 +1,171 @@
+/*
+ * Copyright (C) 2015 Freescale Semiconductor, Inc.
+ * Copyright (C) 2016 Grinn
+ *
+ * Configuration settings for the Grinn liteBoard (i.MX6UL).
+ *
+ * SPDX-License-Identifier: GPL-2.0+
+ */
+#ifndef __LITEBOARD_CONFIG_H
+#define __LITEBOARD_CONFIG_H
+
+#include <asm/arch/imx-regs.h>
+#include <linux/sizes.h>
+#include "mx6_common.h"
+
+/* SPL options */
+#include "imx6_spl.h"
+
+/* Size of malloc() pool */
+#define CONFIG_SYS_MALLOC_LEN (16 * SZ_1M)
+
+#define CONFIG_BOARD_EARLY_INIT_F
+#define CONFIG_BOARD_LATE_INIT
+
+#define CONFIG_MXC_UART
+#define CONFIG_MXC_UART_BASE UART1_BASE
+
+/* MMC Configs */
+#ifdef CONFIG_FSL_USDHC
+#define CONFIG_SYS_FSL_ESDHC_ADDR USDHC1_BASE_ADDR
+#define CONFIG_SUPPORT_EMMC_BOOT
+#endif
+
+#define CONFIG_SYS_MMC_IMG_LOAD_PART 1
+
+#define CONFIG_EXTRA_ENV_SETTINGS \
+ "script=boot.scr\0" \
+ "image=zImage\0" \
+ "console=ttymxc0\0" \
+ "fdt_high=0xffffffff\0" \
+ "initrd_high=0xffffffff\0" \
+ "fdt_file=" CONFIG_DEFAULT_FDT_FILE "\0" \
+ "fdt_addr=0x83000000\0" \
+ "boot_fdt=try\0" \
+ "ip_dyn=yes\0" \
+ "mmcdev="__stringify(CONFIG_SYS_MMC_ENV_DEV)"\0" \
+ "mmcpart=" __stringify(CONFIG_SYS_MMC_IMG_LOAD_PART) "\0" \
+ "mmcroot=" CONFIG_MMCROOT " rootwait rw\0" \
+ "mmcautodetect=yes\0" \
+ "mmcargs=setenv bootargs console=${console},${baudrate} " \
+ "root=${mmcroot}\0" \
+ "loadbootscript=" \
+ "fatload mmc ${mmcdev}:${mmcpart} ${loadaddr} ${script};\0" \
+ "bootscript=echo Running bootscript from mmc ...; " \
+ "source\0" \
+ "loadimage=fatload mmc ${mmcdev}:${mmcpart} ${loadaddr} ${image}\0" \
+ "loadfdt=fatload mmc ${mmcdev}:${mmcpart} ${fdt_addr} ${fdt_file}\0" \
+ "mmcboot=echo Booting from mmc ...; " \
+ "run mmcargs; " \
+ "if test ${boot_fdt} = yes || test ${boot_fdt} = try; then " \
+ "if run loadfdt; then " \
+ "bootz ${loadaddr} - ${fdt_addr}; " \
+ "else " \
+ "if test ${boot_fdt} = try; then " \
+ "bootz; " \
+ "else " \
+ "echo WARN: Cannot load the DT; " \
+ "fi; " \
+ "fi; " \
+ "else " \
+ "bootz; " \
+ "fi;\0" \
+ "netargs=setenv bootargs console=${console},${baudrate} " \
+ "root=/dev/nfs " \
+ "ip=dhcp nfsroot=${serverip}:${nfsroot},v3,tcp\0" \
+ "netboot=echo Booting from net ...; " \
+ "run netargs; " \
+ "if test ${ip_dyn} = yes; then " \
+ "setenv get_cmd dhcp; " \
+ "else " \
+ "setenv get_cmd tftp; " \
+ "fi; " \
+ "${get_cmd} ${image}; " \
+ "if test ${boot_fdt} = yes || test ${boot_fdt} = try; then " \
+ "if ${get_cmd} ${fdt_addr} ${fdt_file}; then " \
+ "bootz ${loadaddr} - ${fdt_addr}; " \
+ "else " \
+ "if test ${boot_fdt} = try; then " \
+ "bootz; " \
+ "else " \
+ "echo WARN: Cannot load the DT; " \
+ "fi; " \
+ "fi; " \
+ "else " \
+ "bootz; " \
+ "fi;\0"
+
+#define CONFIG_BOOTCOMMAND \
+ "mmc dev ${mmcdev};" \
+ "if mmc rescan; then " \
+ "if run loadbootscript; then " \
+ "run bootscript; " \
+ "else " \
+ "if run loadimage; then " \
+ "run mmcboot; " \
+ "else run netboot; " \
+ "fi; " \
+ "fi; " \
+ "else run netboot; fi"
+
+/* Miscellaneous configurable options */
+#define CONFIG_SYS_MEMTEST_START 0x80000000
+#define CONFIG_SYS_MEMTEST_END (CONFIG_SYS_MEMTEST_START + SZ_128M)
+
+#define CONFIG_SYS_LOAD_ADDR CONFIG_LOADADDR
+#define CONFIG_SYS_HZ 1000
+
+#define CONFIG_CMDLINE_EDITING
+#define CONFIG_STACKSIZE SZ_128K
+
+/* Physical Memory Map */
+#define CONFIG_NR_DRAM_BANKS 1
+#define PHYS_SDRAM MMDC0_ARB_BASE_ADDR
+
+#define CONFIG_SYS_SDRAM_BASE PHYS_SDRAM
+#define CONFIG_SYS_INIT_RAM_ADDR IRAM_BASE_ADDR
+#define CONFIG_SYS_INIT_RAM_SIZE IRAM_SIZE
+
+#define CONFIG_SYS_INIT_SP_OFFSET \
+ (CONFIG_SYS_INIT_RAM_SIZE - GENERATED_GBL_DATA_SIZE)
+#define CONFIG_SYS_INIT_SP_ADDR \
+ (CONFIG_SYS_INIT_RAM_ADDR + CONFIG_SYS_INIT_SP_OFFSET)
+
+/* FLASH and environment organization */
+#define CONFIG_ENV_SIZE SZ_8K
+#define CONFIG_ENV_IS_IN_MMC
+#define CONFIG_ENV_OFFSET (8 * SZ_64K)
+#define CONFIG_SYS_MMC_ENV_DEV 0
+#define CONFIG_SYS_MMC_ENV_PART 0
+#define CONFIG_MMCROOT "/dev/mmcblk0p2"
+
+#define CONFIG_CMD_BMODE
+
+/* USB Configs */
+#ifdef CONFIG_CMD_USB
+#define CONFIG_USB_EHCI
+#define CONFIG_USB_EHCI_MX6
+#define CONFIG_USB_STORAGE
+#define CONFIG_EHCI_HCD_INIT_AFTER_RESET
+#define CONFIG_MXC_USB_PORTSC (PORT_PTS_UTMI | PORT_PTS_PTW)
+#define CONFIG_MXC_USB_FLAGS 0
+#define CONFIG_USB_MAX_CONTROLLER_COUNT 1
+#endif
+
+#ifdef CONFIG_CMD_NET
+#define CONFIG_FEC_MXC
+#define CONFIG_MII
+#define CONFIG_FEC_ENET_DEV 0
+
+#define IMX_FEC_BASE ENET_BASE_ADDR
+#define CONFIG_FEC_MXC_PHYADDR 0x0
+#define CONFIG_FEC_XCV_TYPE RMII
+#define CONFIG_ETHPRIME "FEC"
+
+#define CONFIG_PHYLIB
+#define CONFIG_PHY_SMSC
+#endif
+
+#define CONFIG_IMX_THERMAL
+
+#endif
diff --git a/include/configs/mx53cx9020.h b/include/configs/mx53cx9020.h
new file mode 100644
index 0000000..87c75d4
--- /dev/null
+++ b/include/configs/mx53cx9020.h
@@ -0,0 +1,198 @@
+/*
+ * Copyright (C) 2015 Beckhoff Automation GmbH & Co. KG
+ * Patrick Bruenn <p.bruenn@beckhoff.com>
+ *
+ * Configuration settings for Beckhoff CX9020.
+ *
+ * Based on Freescale's Linux i.MX mx53loco.h file:
+ * Copyright (C) 2010-2011 Freescale Semiconductor.
+ *
+ * SPDX-License-Identifier: GPL-2.0+
+ */
+
+#ifndef __CONFIG_H
+#define __CONFIG_H
+
+#include <asm/arch/imx-regs.h>
+
+#define CONFIG_CMDLINE_TAG
+#define CONFIG_SETUP_MEMORY_TAGS
+#define CONFIG_INITRD_TAG
+
+#define CONFIG_SYS_FSL_CLK
+
+/* Size of malloc() pool */
+#define CONFIG_SYS_MALLOC_LEN (10 * 1024 * 1024)
+
+#define CONFIG_BOARD_EARLY_INIT_F
+#define CONFIG_BOARD_LATE_INIT
+#define CONFIG_MXC_GPIO
+#define CONFIG_REVISION_TAG
+
+#define CONFIG_MXC_UART_BASE UART2_BASE
+
+#define CONFIG_FPGA_COUNT 1
+
+/* MMC Configs */
+#define CONFIG_FSL_ESDHC
+#define CONFIG_SYS_FSL_ESDHC_ADDR 0
+#define CONFIG_SYS_FSL_ESDHC_NUM 2
+
+#define CONFIG_MMC
+#define CONFIG_GENERIC_MMC
+
+/* bootz: zImage/initrd.img support */
+#define CONFIG_DOS_PARTITION
+
+/* Eth Configs */
+#define CONFIG_MII
+#define IMX_FEC_BASE FEC_BASE_ADDR
+#define CONFIG_ETHPRIME "FEC0"
+#define CONFIG_FEC_MXC_PHYADDR 0x1F
+
+/* USB Configs */
+#define CONFIG_USB_EHCI
+#define CONFIG_USB_EHCI_MX5
+#define CONFIG_USB_STORAGE
+#define CONFIG_USB_HOST_ETHER
+#define CONFIG_USB_ETHER_ASIX
+#define CONFIG_USB_ETHER_MCS7830
+#define CONFIG_USB_ETHER_SMSC95XX
+#define CONFIG_MXC_USB_PORT 1
+#define CONFIG_MXC_USB_PORTSC (PORT_PTS_UTMI | PORT_PTS_PTW)
+#define CONFIG_MXC_USB_FLAGS 0
+
+/* allow to overwrite serial and ethaddr */
+#define CONFIG_ENV_OVERWRITE
+#define CONFIG_CONS_INDEX 1
+#define CONFIG_BAUDRATE 115200
+
+/* Command definition */
+#define CONFIG_SUPPORT_RAW_INITRD
+
+#define CONFIG_LOADADDR 0x70010000 /* loadaddr env var */
+#define CONFIG_SYS_TEXT_BASE 0x77800000
+
+#define CONFIG_EXTRA_ENV_SETTINGS \
+ "fdt_addr=0x71ff0000\0" \
+ "rdaddr=0x72000000\0" \
+ "console=ttymxc1,115200\0" \
+ "uenv=/boot/uEnv.txt\0" \
+ "optargs=\0" \
+ "cmdline=\0" \
+ "mmcdev=0\0" \
+ "mmcpart=1\0" \
+ "mmcrootfstype=ext4 rootwait fixrtc\0" \
+ "mmcargs=setenv bootargs console=${console} " \
+ "${optargs} " \
+ "root=/dev/mmcblk${mmcdev}p${mmcpart} ro " \
+ "rootfstype=${mmcrootfstype} " \
+ "${cmdline}\0" \
+ "loadimage=load mmc ${bootpart} ${loadaddr} ${bootdir}/${bootfile}\0" \
+ "loadrd=load mmc ${bootpart} ${rdaddr} ${bootdir}/${rdfile};" \
+ "setenv rdsize ${filesize}\0" \
+ "loadfdt=echo loading ${fdt_path} ...;" \
+ "load mmc ${bootpart} ${fdt_addr} ${fdt_path}\0" \
+ "mmcboot=mmc dev ${mmcdev}; " \
+ "if mmc rescan; then " \
+ "echo SD/MMC found on device ${mmcdev};" \
+ "echo Checking for: ${uenv} ...;" \
+ "setenv bootpart ${mmcdev}:${mmcpart};" \
+ "if test -e mmc ${bootpart} ${uenv}; then " \
+ "load mmc ${bootpart} ${loadaddr} ${uenv};" \
+ "env import -t ${loadaddr} ${filesize};" \
+ "echo Loaded environment from ${uenv};" \
+ "if test -n ${dtb}; then " \
+ "setenv fdt_file ${dtb};" \
+ "echo Using: dtb=${fdt_file} ...;" \
+ "fi;" \
+ "echo Checking for uname_r in ${uenv}...;" \
+ "if test -n ${uname_r}; then " \
+ "echo Running uname_boot ...;" \
+ "run uname_boot;" \
+ "fi;" \
+ "fi;" \
+ "fi;\0" \
+ "uname_boot="\
+ "setenv bootdir /boot; " \
+ "setenv bootfile vmlinuz-${uname_r}; " \
+ "setenv ccatfile /boot/ccat.rbf; " \
+ "echo loading CCAT firmware from ${ccatfile}; " \
+ "load mmc ${bootpart} ${loadaddr} ${ccatfile}; " \
+ "fpga load 0 ${loadaddr} ${filesize}; " \
+ "if test -e mmc ${bootpart} ${bootdir}/${bootfile}; then " \
+ "echo loading ${bootdir}/${bootfile} ...; " \
+ "run loadimage;" \
+ "setenv fdt_path /boot/dtbs/${uname_r}/${fdt_file}; " \
+ "if test -e mmc ${bootpart} ${fdt_path}; then " \
+ "run loadfdt;" \
+ "else " \
+ "echo; echo unable to find ${fdt_file} ...;" \
+ "echo booting legacy ...;"\
+ "run mmcargs;" \
+ "echo debug: [${bootargs}] ... ;" \
+ "echo debug: [bootz ${loadaddr}] ... ;" \
+ "bootz ${loadaddr}; " \
+ "fi;" \
+ "run mmcargs;" \
+ "echo debug: [${bootargs}] ... ;" \
+ "echo debug: [bootz ${loadaddr} - ${fdt_addr}] ... ;" \
+ "bootz ${loadaddr} - ${fdt_addr}; " \
+ "fi;\0"
+
+#define CONFIG_BOOTCOMMAND \
+ "run mmcboot;"
+
+#define CONFIG_ARP_TIMEOUT 200UL
+
+/* Miscellaneous configurable options */
+#define CONFIG_SYS_LONGHELP /* undef to save memory */
+#define CONFIG_AUTO_COMPLETE
+#define CONFIG_SYS_CBSIZE 512 /* Console I/O Buffer Size */
+
+#define CONFIG_SYS_MAXARGS 16 /* max number of command args */
+#define CONFIG_SYS_BARGSIZE CONFIG_SYS_CBSIZE /* Boot Argument Buffer Size */
+
+#define CONFIG_SYS_MEMTEST_START 0x70000000
+#define CONFIG_SYS_MEMTEST_END 0x70010000
+
+#define CONFIG_SYS_LOAD_ADDR CONFIG_LOADADDR
+
+#define CONFIG_CMDLINE_EDITING
+
+/* Physical Memory Map */
+#define CONFIG_NR_DRAM_BANKS 2
+#define PHYS_SDRAM_1 CSD0_BASE_ADDR
+#define PHYS_SDRAM_1_SIZE (gd->bd->bi_dram[0].size)
+#define PHYS_SDRAM_2 CSD1_BASE_ADDR
+#define PHYS_SDRAM_2_SIZE (gd->bd->bi_dram[1].size)
+#define PHYS_SDRAM_SIZE (gd->ram_size)
+
+#define CONFIG_SYS_SDRAM_BASE (PHYS_SDRAM_1)
+#define CONFIG_SYS_INIT_RAM_ADDR (IRAM_BASE_ADDR)
+#define CONFIG_SYS_INIT_RAM_SIZE (IRAM_SIZE)
+
+#define CONFIG_SYS_INIT_SP_OFFSET \
+ (CONFIG_SYS_INIT_RAM_SIZE - GENERATED_GBL_DATA_SIZE)
+#define CONFIG_SYS_INIT_SP_ADDR \
+ (CONFIG_SYS_INIT_RAM_ADDR + CONFIG_SYS_INIT_SP_OFFSET)
+
+/* FLASH and environment organization */
+#define CONFIG_SYS_NO_FLASH
+
+#define CONFIG_ENV_OFFSET (6 * 64 * 1024)
+#define CONFIG_ENV_SIZE (8 * 1024)
+#define CONFIG_ENV_IS_IN_MMC
+#define CONFIG_SYS_MMC_ENV_DEV 0
+
+/* Framebuffer and LCD */
+#define CONFIG_PREBOOT
+#define CONFIG_VIDEO_IPUV3
+#define CONFIG_SYS_CONSOLE_OVERWRITE_ROUTINE
+#define CONFIG_VIDEO_BMP_RLE8
+#define CONFIG_SPLASH_SCREEN
+#define CONFIG_BMP_16BPP
+#define CONFIG_VIDEO_LOGO
+#define CONFIG_IPUV3_CLK 200000000
+
+#endif /* __CONFIG_H */
diff --git a/include/configs/mx6_common.h b/include/configs/mx6_common.h
index d28654b..e79ec21 100644
--- a/include/configs/mx6_common.h
+++ b/include/configs/mx6_common.h
@@ -44,7 +44,8 @@
#define CONFIG_REVISION_TAG
/* Boot options */
-#if (defined(CONFIG_MX6SX) || defined(CONFIG_MX6SL) || defined(CONFIG_MX6UL))
+#if (defined(CONFIG_MX6SX) || defined(CONFIG_MX6SL) || \
+ defined(CONFIG_MX6UL) || defined(CONFIG_MX6SLL))
#define CONFIG_LOADADDR 0x82000000
#ifndef CONFIG_SYS_TEXT_BASE
#define CONFIG_SYS_TEXT_BASE 0x87800000
diff --git a/include/configs/mx6sllevk.h b/include/configs/mx6sllevk.h
new file mode 100644
index 0000000..b9f25cf
--- /dev/null
+++ b/include/configs/mx6sllevk.h
@@ -0,0 +1,152 @@
+/*
+ * Copyright 2013-2016 Freescale Semiconductor, Inc.
+ *
+ * Configuration settings for the Freescale i.MX6SL EVK board.
+ *
+ * SPDX-License-Identifier: GPL-2.0+
+ */
+
+#ifndef __CONFIG_H
+#define __CONFIG_H
+
+#include "mx6_common.h"
+
+#ifdef CONFIG_SECURE_BOOT
+#ifndef CONFIG_CSF_SIZE
+#define CONFIG_CSF_SIZE 0x4000
+#endif
+#endif
+
+/* Size of malloc() pool */
+#define CONFIG_SYS_MALLOC_LEN (16 * SZ_1M)
+
+#define CONFIG_BOARD_EARLY_INIT_F
+#define CONFIG_BOARD_LATE_INIT
+
+#define CONFIG_MXC_UART
+#define CONFIG_MXC_UART_BASE UART1_BASE
+
+/* I2C Configs */
+#ifdef CONFIG_CMD_I2C
+#define CONFIG_SYS_I2C_MXC
+#define CONFIG_SYS_I2C_MXC_I2C1 /* enable I2C bus 1 */
+#define CONFIG_SYS_I2C_MXC_I2C2 /* enable I2C bus 2 */
+#define CONFIG_SYS_I2C_MXC_I2C3 /* enable I2C bus 3 */
+#define CONFIG_SYS_I2C_SPEED 100000
+#endif
+
+#define CONFIG_EXTRA_ENV_SETTINGS \
+ "epdc_waveform=epdc_splash.bin\0" \
+ "script=boot.scr\0" \
+ "image=zImage\0" \
+ "console=ttymxc0\0" \
+ "fdt_high=0xffffffff\0" \
+ "initrd_high=0xffffffff\0" \
+ "fdt_file=imx6sll-evk.dtb\0" \
+ "fdt_addr=0x83000000\0" \
+ "boot_fdt=try\0" \
+ "ip_dyn=yes\0" \
+ "mmcdev="__stringify(CONFIG_SYS_MMC_ENV_DEV)"\0" \
+ "mmcpart=1\0" \
+ "mmcroot=" CONFIG_MMCROOT " rootwait rw\0" \
+ "mmcautodetect=yes\0" \
+ "mmcargs=setenv bootargs console=${console},${baudrate} " \
+ "root=${mmcroot}\0" \
+ "loadbootscript=" \
+ "fatload mmc ${mmcdev}:${mmcpart} ${loadaddr} ${script};\0" \
+ "bootscript=echo Running bootscript from mmc ...; " \
+ "source\0" \
+ "loadimage=fatload mmc ${mmcdev}:${mmcpart} ${loadaddr} ${image}\0" \
+ "loadfdt=fatload mmc ${mmcdev}:${mmcpart} ${fdt_addr} ${fdt_file}\0" \
+ "mmcboot=echo Booting from mmc ...; " \
+ "run mmcargs; " \
+ "if test ${boot_fdt} = yes || test ${boot_fdt} = try; then " \
+ "if run loadfdt; then " \
+ "bootz ${loadaddr} - ${fdt_addr}; " \
+ "else " \
+ "if test ${boot_fdt} = try; then " \
+ "bootz; " \
+ "else " \
+ "echo WARN: Cannot load the DT; " \
+ "fi; " \
+ "fi; " \
+ "else " \
+ "bootz; " \
+ "fi;\0" \
+ "netargs=setenv bootargs console=${console},${baudrate} " \
+ "root=/dev/nfs " \
+ "ip=dhcp nfsroot=${serverip}:${nfsroot},v3,tcp\0" \
+ "netboot=echo Booting from net ...; " \
+ "usb start; " \
+ "run netargs; " \
+ "if test ${ip_dyn} = yes; then " \
+ "setenv get_cmd dhcp; " \
+ "else " \
+ "setenv get_cmd tftp; " \
+ "fi; " \
+ "${get_cmd} ${image}; " \
+ "if test ${boot_fdt} = yes || test ${boot_fdt} = try; then " \
+ "if ${get_cmd} ${fdt_addr} ${fdt_file}; then " \
+ "bootz ${loadaddr} - ${fdt_addr}; " \
+ "else " \
+ "if test ${boot_fdt} = try; then " \
+ "bootz; " \
+ "else " \
+ "echo WARN: Cannot load the DT; " \
+ "fi; " \
+ "fi; " \
+ "else " \
+ "bootz; " \
+ "fi;\0"
+
+#define CONFIG_BOOTCOMMAND \
+ "mmc dev ${mmcdev};" \
+ "mmc dev ${mmcdev}; if mmc rescan; then " \
+ "if run loadbootscript; then " \
+ "run bootscript; " \
+ "else " \
+ "if run loadimage; then " \
+ "run mmcboot; " \
+ "else run netboot; " \
+ "fi; " \
+ "fi; " \
+ "else run netboot; fi"
+
+/* Miscellaneous configurable options */
+#define CONFIG_SYS_MEMTEST_START 0x80000000
+#define CONFIG_SYS_MEMTEST_END (CONFIG_SYS_MEMTEST_START + SZ_128M)
+
+#define CONFIG_STACKSIZE SZ_128K
+
+/* Physical Memory Map */
+#define CONFIG_NR_DRAM_BANKS 1
+#define PHYS_SDRAM MMDC0_ARB_BASE_ADDR
+#define PHYS_SDRAM_SIZE SZ_2G
+
+#define CONFIG_SYS_SDRAM_BASE PHYS_SDRAM
+#define CONFIG_SYS_INIT_RAM_ADDR IRAM_BASE_ADDR
+#define CONFIG_SYS_INIT_RAM_SIZE IRAM_SIZE
+
+#define CONFIG_SYS_INIT_SP_OFFSET \
+ (CONFIG_SYS_INIT_RAM_SIZE - GENERATED_GBL_DATA_SIZE)
+#define CONFIG_SYS_INIT_SP_ADDR \
+ (CONFIG_SYS_INIT_RAM_ADDR + CONFIG_SYS_INIT_SP_OFFSET)
+
+/* Environment organization */
+#define CONFIG_ENV_SIZE SZ_8K
+#define CONFIG_SYS_MMC_ENV_PART 0 /* user partition */
+#define CONFIG_MMCROOT "/dev/mmcblk0p2" /* USDHC1 */
+
+#define CONFIG_ENV_OFFSET (12 * SZ_64K)
+#define CONFIG_ENV_IS_IN_MMC
+
+/* MMC Configs */
+#define CONFIG_SYS_FSL_ESDHC_ADDR USDHC1_BASE_ADDR
+#define CONFIG_SYS_FSL_USDHC_NUM 3
+#define CONFIG_SYS_MMC_ENV_DEV 0 /* USDHC1 */
+
+#define CONFIG_IMX_THERMAL
+
+#define CONFIG_IOMUX_LPSR
+
+#endif /* __CONFIG_H */
diff --git a/include/configs/udoo_neo.h b/include/configs/udoo_neo.h
index 81e0481..aec39db 100644
--- a/include/configs/udoo_neo.h
+++ b/include/configs/udoo_neo.h
@@ -27,13 +27,11 @@
/* Command definition */
#define CONFIG_MXC_UART_BASE UART1_BASE
-#define CONFIG_SYS_FSL_USDHC_NUM 2
#define CONFIG_SYS_MMC_ENV_DEV 0 /*USDHC2*/
/* Linux only */
#define CONFIG_ENV_VARS_UBOOT_RUNTIME_CONFIG
#define CONFIG_EXTRA_ENV_SETTINGS \
- "console=ttymxc0,115200\0" \
"fdt_high=0xffffffff\0" \
"initrd_high=0xffffffff\0" \
"fdt_file=undefined\0" \
@@ -41,7 +39,6 @@
"ip_dyn=yes\0" \
"mmcdev=0\0" \
"mmcrootfstype=ext4\0" \
- "mmcautodetect=no\0" \
"findfdt="\
"if test $board_name = BASIC; then " \
"setenv fdt_file imx6sx-udoo-neo-basic.dtb; fi; " \
@@ -61,7 +58,8 @@
BOOTENV
#define BOOT_TARGET_DEVICES(func) \
- func(MMC, mmc, 0)
+ func(MMC, mmc, 0) \
+ func(DHCP, dhcp, na)
#define CONFIG_BOOTCOMMAND \
"run findfdt; " \
@@ -91,4 +89,33 @@
#define CONFIG_ENV_SIZE SZ_8K
#define CONFIG_ENV_IS_IN_MMC
+#define CONFIG_IMX_THERMAL
+
+/* I2C configs */
+#define CONFIG_SYS_I2C
+#define CONFIG_SYS_I2C_MXC
+#define CONFIG_SYS_I2C_MXC_I2C1
+#define CONFIG_SYS_I2C_SPEED 100000
+
+/* PMIC */
+#define CONFIG_POWER
+#define CONFIG_POWER_I2C
+#define CONFIG_POWER_PFUZE3000
+#define CONFIG_POWER_PFUZE3000_I2C_ADDR 0x08
+#define PFUZE3000_I2C_BUS 0
+
+/* Network */
+#define CONFIG_FEC_MXC
+#define CONFIG_MII
+
+#define CONFIG_FEC_ENET_DEV 0
+#define IMX_FEC_BASE ENET_BASE_ADDR
+#define CONFIG_FEC_MXC_PHYADDR 0x0
+
+#define CONFIG_FEC_XCV_TYPE RMII
+#define CONFIG_ETHPRIME "FEC0"
+
+#define CONFIG_PHYLIB
+#define CONFIG_PHY_MICREL
+
#endif /* __CONFIG_H */
diff --git a/include/configs/xilinx_zynqmp.h b/include/configs/xilinx_zynqmp.h
index d480990..fb4f6d6 100644
--- a/include/configs/xilinx_zynqmp.h
+++ b/include/configs/xilinx_zynqmp.h
@@ -181,7 +181,6 @@
#ifdef CONFIG_SATA_CEVA
#define CONFIG_LIBATA
#define CONFIG_SCSI_AHCI
-#define CONFIG_SCSI_AHCI_PLAT
#define CONFIG_SYS_SCSI_MAX_SCSI_ID 2
#define CONFIG_SYS_SCSI_MAX_LUN 1
#define CONFIG_SYS_SCSI_MAX_DEVICE (CONFIG_SYS_SCSI_MAX_SCSI_ID * \
diff --git a/include/configs/xilinx_zynqmp_ep.h b/include/configs/xilinx_zynqmp_ep.h
index d0ce768..3a572b7 100644
--- a/include/configs/xilinx_zynqmp_ep.h
+++ b/include/configs/xilinx_zynqmp_ep.h
@@ -16,7 +16,6 @@
#define CONFIG_ZYNQ_SDHCI_MAX_FREQ 52000000
#define CONFIG_ZYNQ_SDHCI_MIN_FREQ (CONFIG_ZYNQ_SDHCI_MAX_FREQ >> 9)
#define CONFIG_ZYNQ_EEPROM
-#define CONFIG_SATA_CEVA
#define CONFIG_ZYNQMP_XHCI_LIST {ZYNQMP_USB0_XHCI_BASEADDR, \
ZYNQMP_USB1_XHCI_BASEADDR}
diff --git a/include/configs/xilinx_zynqmp_zcu102.h b/include/configs/xilinx_zynqmp_zcu102.h
index adf2321..8d018da 100644
--- a/include/configs/xilinx_zynqmp_zcu102.h
+++ b/include/configs/xilinx_zynqmp_zcu102.h
@@ -41,8 +41,6 @@
#define CONFIG_CMD_PCA953X
#define CONFIG_CMD_PCA953X_INFO
-#define CONFIG_SATA_CEVA
-
#define CONFIG_ZYNQMP_XHCI_LIST {ZYNQMP_USB0_XHCI_BASEADDR}
#define CONFIG_SYS_I2C_EEPROM_ADDR_LEN 1
diff --git a/include/dm/uclass-id.h b/include/dm/uclass-id.h
index eb78c4d..8c92d0b 100644
--- a/include/dm/uclass-id.h
+++ b/include/dm/uclass-id.h
@@ -66,6 +66,7 @@
UCLASS_REMOTEPROC, /* Remote Processor device */
UCLASS_RESET, /* Reset controller device */
UCLASS_RTC, /* Real time clock device */
+ UCLASS_SCSI, /* SCSI device */
UCLASS_SERIAL, /* Serial UART */
UCLASS_SPI, /* SPI bus */
UCLASS_SPMI, /* System Power Management Interface bus */
diff --git a/include/dt-bindings/clock/imx5-clock.h b/include/dt-bindings/clock/imx5-clock.h
new file mode 100644
index 0000000..d382fc7
--- /dev/null
+++ b/include/dt-bindings/clock/imx5-clock.h
@@ -0,0 +1,219 @@
+/*
+ * Copyright 2013 Lucas Stach, Pengutronix <l.stach@pengutronix.de>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ *
+ */
+
+#ifndef __DT_BINDINGS_CLOCK_IMX5_H
+#define __DT_BINDINGS_CLOCK_IMX5_H
+
+#define IMX5_CLK_DUMMY 0
+#define IMX5_CLK_CKIL 1
+#define IMX5_CLK_OSC 2
+#define IMX5_CLK_CKIH1 3
+#define IMX5_CLK_CKIH2 4
+#define IMX5_CLK_AHB 5
+#define IMX5_CLK_IPG 6
+#define IMX5_CLK_AXI_A 7
+#define IMX5_CLK_AXI_B 8
+#define IMX5_CLK_UART_PRED 9
+#define IMX5_CLK_UART_ROOT 10
+#define IMX5_CLK_ESDHC_A_PRED 11
+#define IMX5_CLK_ESDHC_B_PRED 12
+#define IMX5_CLK_ESDHC_C_SEL 13
+#define IMX5_CLK_ESDHC_D_SEL 14
+#define IMX5_CLK_EMI_SEL 15
+#define IMX5_CLK_EMI_SLOW_PODF 16
+#define IMX5_CLK_NFC_PODF 17
+#define IMX5_CLK_ECSPI_PRED 18
+#define IMX5_CLK_ECSPI_PODF 19
+#define IMX5_CLK_USBOH3_PRED 20
+#define IMX5_CLK_USBOH3_PODF 21
+#define IMX5_CLK_USB_PHY_PRED 22
+#define IMX5_CLK_USB_PHY_PODF 23
+#define IMX5_CLK_CPU_PODF 24
+#define IMX5_CLK_DI_PRED 25
+#define IMX5_CLK_TVE_SEL 27
+#define IMX5_CLK_UART1_IPG_GATE 28
+#define IMX5_CLK_UART1_PER_GATE 29
+#define IMX5_CLK_UART2_IPG_GATE 30
+#define IMX5_CLK_UART2_PER_GATE 31
+#define IMX5_CLK_UART3_IPG_GATE 32
+#define IMX5_CLK_UART3_PER_GATE 33
+#define IMX5_CLK_I2C1_GATE 34
+#define IMX5_CLK_I2C2_GATE 35
+#define IMX5_CLK_GPT_IPG_GATE 36
+#define IMX5_CLK_PWM1_IPG_GATE 37
+#define IMX5_CLK_PWM1_HF_GATE 38
+#define IMX5_CLK_PWM2_IPG_GATE 39
+#define IMX5_CLK_PWM2_HF_GATE 40
+#define IMX5_CLK_GPT_HF_GATE 41
+#define IMX5_CLK_FEC_GATE 42
+#define IMX5_CLK_USBOH3_PER_GATE 43
+#define IMX5_CLK_ESDHC1_IPG_GATE 44
+#define IMX5_CLK_ESDHC2_IPG_GATE 45
+#define IMX5_CLK_ESDHC3_IPG_GATE 46
+#define IMX5_CLK_ESDHC4_IPG_GATE 47
+#define IMX5_CLK_SSI1_IPG_GATE 48
+#define IMX5_CLK_SSI2_IPG_GATE 49
+#define IMX5_CLK_SSI3_IPG_GATE 50
+#define IMX5_CLK_ECSPI1_IPG_GATE 51
+#define IMX5_CLK_ECSPI1_PER_GATE 52
+#define IMX5_CLK_ECSPI2_IPG_GATE 53
+#define IMX5_CLK_ECSPI2_PER_GATE 54
+#define IMX5_CLK_CSPI_IPG_GATE 55
+#define IMX5_CLK_SDMA_GATE 56
+#define IMX5_CLK_EMI_SLOW_GATE 57
+#define IMX5_CLK_IPU_SEL 58
+#define IMX5_CLK_IPU_GATE 59
+#define IMX5_CLK_NFC_GATE 60
+#define IMX5_CLK_IPU_DI1_GATE 61
+#define IMX5_CLK_VPU_SEL 62
+#define IMX5_CLK_VPU_GATE 63
+#define IMX5_CLK_VPU_REFERENCE_GATE 64
+#define IMX5_CLK_UART4_IPG_GATE 65
+#define IMX5_CLK_UART4_PER_GATE 66
+#define IMX5_CLK_UART5_IPG_GATE 67
+#define IMX5_CLK_UART5_PER_GATE 68
+#define IMX5_CLK_TVE_GATE 69
+#define IMX5_CLK_TVE_PRED 70
+#define IMX5_CLK_ESDHC1_PER_GATE 71
+#define IMX5_CLK_ESDHC2_PER_GATE 72
+#define IMX5_CLK_ESDHC3_PER_GATE 73
+#define IMX5_CLK_ESDHC4_PER_GATE 74
+#define IMX5_CLK_USB_PHY_GATE 75
+#define IMX5_CLK_HSI2C_GATE 76
+#define IMX5_CLK_MIPI_HSC1_GATE 77
+#define IMX5_CLK_MIPI_HSC2_GATE 78
+#define IMX5_CLK_MIPI_ESC_GATE 79
+#define IMX5_CLK_MIPI_HSP_GATE 80
+#define IMX5_CLK_LDB_DI1_DIV_3_5 81
+#define IMX5_CLK_LDB_DI1_DIV 82
+#define IMX5_CLK_LDB_DI0_DIV_3_5 83
+#define IMX5_CLK_LDB_DI0_DIV 84
+#define IMX5_CLK_LDB_DI1_GATE 85
+#define IMX5_CLK_CAN2_SERIAL_GATE 86
+#define IMX5_CLK_CAN2_IPG_GATE 87
+#define IMX5_CLK_I2C3_GATE 88
+#define IMX5_CLK_LP_APM 89
+#define IMX5_CLK_PERIPH_APM 90
+#define IMX5_CLK_MAIN_BUS 91
+#define IMX5_CLK_AHB_MAX 92
+#define IMX5_CLK_AIPS_TZ1 93
+#define IMX5_CLK_AIPS_TZ2 94
+#define IMX5_CLK_TMAX1 95
+#define IMX5_CLK_TMAX2 96
+#define IMX5_CLK_TMAX3 97
+#define IMX5_CLK_SPBA 98
+#define IMX5_CLK_UART_SEL 99
+#define IMX5_CLK_ESDHC_A_SEL 100
+#define IMX5_CLK_ESDHC_B_SEL 101
+#define IMX5_CLK_ESDHC_A_PODF 102
+#define IMX5_CLK_ESDHC_B_PODF 103
+#define IMX5_CLK_ECSPI_SEL 104
+#define IMX5_CLK_USBOH3_SEL 105
+#define IMX5_CLK_USB_PHY_SEL 106
+#define IMX5_CLK_IIM_GATE 107
+#define IMX5_CLK_USBOH3_GATE 108
+#define IMX5_CLK_EMI_FAST_GATE 109
+#define IMX5_CLK_IPU_DI0_GATE 110
+#define IMX5_CLK_GPC_DVFS 111
+#define IMX5_CLK_PLL1_SW 112
+#define IMX5_CLK_PLL2_SW 113
+#define IMX5_CLK_PLL3_SW 114
+#define IMX5_CLK_IPU_DI0_SEL 115
+#define IMX5_CLK_IPU_DI1_SEL 116
+#define IMX5_CLK_TVE_EXT_SEL 117
+#define IMX5_CLK_MX51_MIPI 118
+#define IMX5_CLK_PLL4_SW 119
+#define IMX5_CLK_LDB_DI1_SEL 120
+#define IMX5_CLK_DI_PLL4_PODF 121
+#define IMX5_CLK_LDB_DI0_SEL 122
+#define IMX5_CLK_LDB_DI0_GATE 123
+#define IMX5_CLK_USB_PHY1_GATE 124
+#define IMX5_CLK_USB_PHY2_GATE 125
+#define IMX5_CLK_PER_LP_APM 126
+#define IMX5_CLK_PER_PRED1 127
+#define IMX5_CLK_PER_PRED2 128
+#define IMX5_CLK_PER_PODF 129
+#define IMX5_CLK_PER_ROOT 130
+#define IMX5_CLK_SSI_APM 131
+#define IMX5_CLK_SSI1_ROOT_SEL 132
+#define IMX5_CLK_SSI2_ROOT_SEL 133
+#define IMX5_CLK_SSI3_ROOT_SEL 134
+#define IMX5_CLK_SSI_EXT1_SEL 135
+#define IMX5_CLK_SSI_EXT2_SEL 136
+#define IMX5_CLK_SSI_EXT1_COM_SEL 137
+#define IMX5_CLK_SSI_EXT2_COM_SEL 138
+#define IMX5_CLK_SSI1_ROOT_PRED 139
+#define IMX5_CLK_SSI1_ROOT_PODF 140
+#define IMX5_CLK_SSI2_ROOT_PRED 141
+#define IMX5_CLK_SSI2_ROOT_PODF 142
+#define IMX5_CLK_SSI_EXT1_PRED 143
+#define IMX5_CLK_SSI_EXT1_PODF 144
+#define IMX5_CLK_SSI_EXT2_PRED 145
+#define IMX5_CLK_SSI_EXT2_PODF 146
+#define IMX5_CLK_SSI1_ROOT_GATE 147
+#define IMX5_CLK_SSI2_ROOT_GATE 148
+#define IMX5_CLK_SSI3_ROOT_GATE 149
+#define IMX5_CLK_SSI_EXT1_GATE 150
+#define IMX5_CLK_SSI_EXT2_GATE 151
+#define IMX5_CLK_EPIT1_IPG_GATE 152
+#define IMX5_CLK_EPIT1_HF_GATE 153
+#define IMX5_CLK_EPIT2_IPG_GATE 154
+#define IMX5_CLK_EPIT2_HF_GATE 155
+#define IMX5_CLK_CAN_SEL 156
+#define IMX5_CLK_CAN1_SERIAL_GATE 157
+#define IMX5_CLK_CAN1_IPG_GATE 158
+#define IMX5_CLK_OWIRE_GATE 159
+#define IMX5_CLK_GPU3D_SEL 160
+#define IMX5_CLK_GPU2D_SEL 161
+#define IMX5_CLK_GPU3D_GATE 162
+#define IMX5_CLK_GPU2D_GATE 163
+#define IMX5_CLK_GARB_GATE 164
+#define IMX5_CLK_CKO1_SEL 165
+#define IMX5_CLK_CKO1_PODF 166
+#define IMX5_CLK_CKO1 167
+#define IMX5_CLK_CKO2_SEL 168
+#define IMX5_CLK_CKO2_PODF 169
+#define IMX5_CLK_CKO2 170
+#define IMX5_CLK_SRTC_GATE 171
+#define IMX5_CLK_PATA_GATE 172
+#define IMX5_CLK_SATA_GATE 173
+#define IMX5_CLK_SPDIF_XTAL_SEL 174
+#define IMX5_CLK_SPDIF0_SEL 175
+#define IMX5_CLK_SPDIF1_SEL 176
+#define IMX5_CLK_SPDIF0_PRED 177
+#define IMX5_CLK_SPDIF0_PODF 178
+#define IMX5_CLK_SPDIF1_PRED 179
+#define IMX5_CLK_SPDIF1_PODF 180
+#define IMX5_CLK_SPDIF0_COM_SEL 181
+#define IMX5_CLK_SPDIF1_COM_SEL 182
+#define IMX5_CLK_SPDIF0_GATE 183
+#define IMX5_CLK_SPDIF1_GATE 184
+#define IMX5_CLK_SPDIF_IPG_GATE 185
+#define IMX5_CLK_OCRAM 186
+#define IMX5_CLK_SAHARA_IPG_GATE 187
+#define IMX5_CLK_SATA_REF 188
+#define IMX5_CLK_STEP_SEL 189
+#define IMX5_CLK_CPU_PODF_SEL 190
+#define IMX5_CLK_ARM 191
+#define IMX5_CLK_FIRI_PRED 192
+#define IMX5_CLK_FIRI_SEL 193
+#define IMX5_CLK_FIRI_PODF 194
+#define IMX5_CLK_FIRI_SERIAL_GATE 195
+#define IMX5_CLK_FIRI_IPG_GATE 196
+#define IMX5_CLK_CSI0_MCLK1_PRED 197
+#define IMX5_CLK_CSI0_MCLK1_SEL 198
+#define IMX5_CLK_CSI0_MCLK1_PODF 199
+#define IMX5_CLK_CSI0_MCLK1_GATE 200
+#define IMX5_CLK_IEEE1588_PRED 201
+#define IMX5_CLK_IEEE1588_SEL 202
+#define IMX5_CLK_IEEE1588_PODF 203
+#define IMX5_CLK_IEEE1588_GATE 204
+#define IMX5_CLK_END 205
+
+#endif /* __DT_BINDINGS_CLOCK_IMX5_H */
diff --git a/include/dt-bindings/clock/imx6sll-clock.h b/include/dt-bindings/clock/imx6sll-clock.h
new file mode 100644
index 0000000..39c2567
--- /dev/null
+++ b/include/dt-bindings/clock/imx6sll-clock.h
@@ -0,0 +1,204 @@
+/*
+ * Copyright (C) 2016 Freescale Semiconductor, Inc.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ *
+ */
+
+#ifndef __DT_BINDINGS_CLOCK_IMX6SLL_H
+#define __DT_BINDINGS_CLOCK_IMX6SLL_H
+
+#define IMX6SLL_CLK_DUMMY 0
+#define IMX6SLL_CLK_CKIL 1
+#define IMX6SLL_CLK_OSC 2
+#define IMX6SLL_PLL1_BYPASS_SRC 3
+#define IMX6SLL_PLL2_BYPASS_SRC 4
+#define IMX6SLL_PLL3_BYPASS_SRC 5
+#define IMX6SLL_PLL4_BYPASS_SRC 6
+#define IMX6SLL_PLL5_BYPASS_SRC 7
+#define IMX6SLL_PLL6_BYPASS_SRC 8
+#define IMX6SLL_PLL7_BYPASS_SRC 9
+#define IMX6SLL_CLK_PLL1 10
+#define IMX6SLL_CLK_PLL2 11
+#define IMX6SLL_CLK_PLL3 12
+#define IMX6SLL_CLK_PLL4 13
+#define IMX6SLL_CLK_PLL5 14
+#define IMX6SLL_CLK_PLL6 15
+#define IMX6SLL_CLK_PLL7 16
+#define IMX6SLL_PLL1_BYPASS 17
+#define IMX6SLL_PLL2_BYPASS 18
+#define IMX6SLL_PLL3_BYPASS 19
+#define IMX6SLL_PLL4_BYPASS 20
+#define IMX6SLL_PLL5_BYPASS 21
+#define IMX6SLL_PLL6_BYPASS 22
+#define IMX6SLL_PLL7_BYPASS 23
+#define IMX6SLL_CLK_PLL1_SYS 24
+#define IMX6SLL_CLK_PLL2_BUS 25
+#define IMX6SLL_CLK_PLL3_USB_OTG 26
+#define IMX6SLL_CLK_PLL4_AUDIO 27
+#define IMX6SLL_CLK_PLL5_VIDEO 28
+#define IMX6SLL_CLK_PLL6_ENET 29
+#define IMX6SLL_CLK_PLL7_USB_HOST 30
+#define IMX6SLL_CLK_USBPHY1 31
+#define IMX6SLL_CLK_USBPHY2 32
+#define IMX6SLL_CLK_USBPHY1_GATE 33
+#define IMX6SLL_CLK_USBPHY2_GATE 34
+#define IMX6SLL_CLK_PLL2_PFD0 35
+#define IMX6SLL_CLK_PLL2_PFD1 36
+#define IMX6SLL_CLK_PLL2_PFD2 37
+#define IMX6SLL_CLK_PLL2_PFD3 38
+#define IMX6SLL_CLK_PLL3_PFD0 39
+#define IMX6SLL_CLK_PLL3_PFD1 40
+#define IMX6SLL_CLK_PLL3_PFD2 41
+#define IMX6SLL_CLK_PLL3_PFD3 42
+#define IMX6SLL_CLK_PLL4_POST_DIV 43
+#define IMX6SLL_CLK_PLL4_AUDIO_DIV 44
+#define IMX6SLL_CLK_PLL5_POST_DIV 45
+#define IMX6SLL_CLK_PLL5_VIDEO_DIV 46
+#define IMX6SLL_CLK_PLL2_198M 47
+#define IMX6SLL_CLK_PLL3_120M 48
+#define IMX6SLL_CLK_PLL3_80M 49
+#define IMX6SLL_CLK_PLL3_60M 50
+#define IMX6SLL_CLK_STEP 51
+#define IMX6SLL_CLK_PLL1_SW 52
+#define IMX6SLL_CLK_AXI_ALT_SEL 53
+#define IMX6SLL_CLK_AXI_SEL 54
+#define IMX6SLL_CLK_PERIPH_PRE 55
+#define IMX6SLL_CLK_PERIPH2_PRE 56
+#define IMX6SLL_CLK_PERIPH_CLK2_SEL 57
+#define IMX6SLL_CLK_PERIPH2_CLK2_SEL 58
+#define IMX6SLL_CLK_PERCLK_SEL 59
+#define IMX6SLL_CLK_USDHC1_SEL 60
+#define IMX6SLL_CLK_USDHC2_SEL 61
+#define IMX6SLL_CLK_USDHC3_SEL 62
+#define IMX6SLL_CLK_SSI1_SEL 63
+#define IMX6SLL_CLK_SSI2_SEL 64
+#define IMX6SLL_CLK_SSI3_SEL 65
+#define IMX6SLL_CLK_PXP_SEL 66
+#define IMX6SLL_CLK_LCDIF_PRE_SEL 67
+#define IMX6SLL_CLK_LCDIF_SEL 68
+#define IMX6SLL_CLK_EPDC_PRE_SEL 69
+#define IMX6SLL_CLK_SPDIF_SEL 70
+#define IMX6SLL_CLK_ECSPI_SEL 71
+#define IMX6SLL_CLK_UART_SEL 72
+#define IMX6SLL_CLK_ARM 73
+#define IMX6SLL_CLK_PERIPH 74
+#define IMX6SLL_CLK_PERIPH2 75
+#define IMX6SLL_CLK_PERIPH2_CLK2 76
+#define IMX6SLL_CLK_PERIPH_CLK2 77
+#define IMX6SLL_CLK_MMDC_PODF 78
+#define IMX6SLL_CLK_AXI_PODF 79
+#define IMX6SLL_CLK_AHB 80
+#define IMX6SLL_CLK_IPG 81
+#define IMX6SLL_CLK_PERCLK 82
+#define IMX6SLL_CLK_USDHC1_PODF 83
+#define IMX6SLL_CLK_USDHC2_PODF 84
+#define IMX6SLL_CLK_USDHC3_PODF 85
+#define IMX6SLL_CLK_SSI1_PRED 86
+#define IMX6SLL_CLK_SSI2_PRED 87
+#define IMX6SLL_CLK_SSI3_PRED 88
+#define IMX6SLL_CLK_SSI1_PODF 89
+#define IMX6SLL_CLK_SSI2_PODF 90
+#define IMX6SLL_CLK_SSI3_PODF 91
+#define IMX6SLL_CLK_PXP_PODF 92
+#define IMX6SLL_CLK_LCDIF_PRED 93
+#define IMX6SLL_CLK_LCDIF_PODF 94
+#define IMX6SLL_CLK_EPDC_SEL 95
+#define IMX6SLL_CLK_EPDC_PODF 96
+#define IMX6SLL_CLK_SPDIF_PRED 97
+#define IMX6SLL_CLK_SPDIF_PODF 98
+#define IMX6SLL_CLK_ECSPI_PODF 99
+#define IMX6SLL_CLK_UART_PODF 100
+
+/* CCGR 0 */
+#define IMX6SLL_CLK_AIPSTZ1 101
+#define IMX6SLL_CLK_AIPSTZ2 102
+#define IMX6SLL_CLK_DCP 103
+#define IMX6SLL_CLK_UART2_IPG 104
+#define IMX6SLL_CLK_UART2_SERIAL 105
+
+/* CCGR 1 */
+#define IMX6SLL_CLK_ECSPI1 106
+#define IMX6SLL_CLK_ECSPI2 107
+#define IMX6SLL_CLK_ECSPI3 108
+#define IMX6SLL_CLK_ECSPI4 109
+#define IMX6SLL_CLK_UART3_IPG 110
+#define IMX6SLL_CLK_UART3_SERIAL 111
+#define IMX6SLL_CLK_UART4_IPG 112
+#define IMX6SLL_CLK_UART4_SERIAL 113
+#define IMX6SLL_CLK_EPIT1 114
+#define IMX6SLL_CLK_EPIT2 115
+#define IMX6SLL_CLK_GPT_BUS 116
+#define IMX6SLL_CLK_GPT_SERIAL 117
+
+/* CCGR2 */
+#define IMX6SLL_CLK_CSI 118
+#define IMX6SLL_CLK_I2C1 119
+#define IMX6SLL_CLK_I2C2 120
+#define IMX6SLL_CLK_I2C3 121
+#define IMX6SLL_CLK_OCOTP 122
+#define IMX6SLL_CLK_LCDIF_APB 123
+#define IMX6SLL_CLK_PXP 124
+
+/* CCGR3 */
+#define IMX6SLL_CLK_UART5_IPG 125
+#define IMX6SLL_CLK_UART5_SERIAL 126
+#define IMX6SLL_CLK_EPDC_AXI 127
+#define IMX6SLL_CLK_EPDC_PIX 128
+#define IMX6SLL_CLK_LCDIF_PIX 129
+#define IMX6SLL_CLK_WDOG1 130
+#define IMX6SLL_CLK_MMDC_P0_FAST 131
+#define IMX6SLL_CLK_MMDC_P0_IPG 132
+#define IMX6SLL_CLK_OCRAM 133
+
+/* CCGR4 */
+#define IMX6SLL_CLK_PWM1 134
+#define IMX6SLL_CLK_PWM2 135
+#define IMX6SLL_CLK_PWM3 136
+#define IMX6SLL_CLK_PWM4 137
+
+/* CCGR 5 */
+#define IMX6SLL_CLK_ROM 138
+#define IMX6SLL_CLK_SDMA 139
+#define IMX6SLL_CLK_KPP 140
+#define IMX6SLL_CLK_WDOG2 141
+#define IMX6SLL_CLK_SPBA 142
+#define IMX6SLL_CLK_SPDIF 143
+#define IMX6SLL_CLK_SPDIF_GCLK 144
+#define IMX6SLL_CLK_SSI1 145
+#define IMX6SLL_CLK_SSI1_IPG 146
+#define IMX6SLL_CLK_SSI2 147
+#define IMX6SLL_CLK_SSI2_IPG 148
+#define IMX6SLL_CLK_SSI3 149
+#define IMX6SLL_CLK_SSI3_IPG 150
+#define IMX6SLL_CLK_UART1_IPG 151
+#define IMX6SLL_CLK_UART1_SERIAL 152
+
+/* CCGR 6 */
+#define IMX6SLL_CLK_USBOH3 153
+#define IMX6SLL_CLK_USDHC1 154
+#define IMX6SLL_CLK_USDHC2 155
+#define IMX6SLL_CLK_USDHC3 156
+
+#define IMX6SLL_CLK_IPP_DI0 157
+#define IMX6SLL_CLK_IPP_DI1 158
+#define IMX6SLL_CLK_LDB_DI0_SEL 159
+#define IMX6SLL_CLK_LDB_DI0_DIV_3_5 160
+#define IMX6SLL_CLK_LDB_DI0_DIV_7 161
+#define IMX6SLL_CLK_LDB_DI0_DIV_SEL 162
+#define IMX6SLL_CLK_LDB_DI0 163
+#define IMX6SLL_CLK_LDB_DI1_SEL 164
+#define IMX6SLL_CLK_LDB_DI1_DIV_3_5 165
+#define IMX6SLL_CLK_LDB_DI1_DIV_7 166
+#define IMX6SLL_CLK_LDB_DI1_DIV_SEL 167
+#define IMX6SLL_CLK_LDB_DI1 168
+#define IMX6SLL_CLK_EXTERN_AUDIO_SEL 169
+#define IMX6SLL_CLK_EXTERN_AUDIO_PRED 170
+#define IMX6SLL_CLK_EXTERN_AUDIO_PODF 171
+#define IMX6SLL_CLK_EXTERN_AUDIO 172
+
+#define IMX6SLL_CLK_END 173
+
+#endif /* __DT_BINDINGS_CLOCK_IMX6SLL_H */
diff --git a/include/dt-bindings/clock/imx6ul-clock.h b/include/dt-bindings/clock/imx6ul-clock.h
index 18de070..4623f17 100644
--- a/include/dt-bindings/clock/imx6ul-clock.h
+++ b/include/dt-bindings/clock/imx6ul-clock.h
@@ -234,6 +234,7 @@
#define IMX6UL_CLK_CSI_SEL 221
#define IMX6UL_CLK_CSI_PODF 222
#define IMX6UL_CLK_PLL3_120M 223
+#define IMX6UL_CLK_KPP 224
/* For i.MX6ULL */
#define IMX6UL_CLK_ESAI_SEL 224
#define IMX6UL_CLK_ESAI_PRED 225
diff --git a/include/fdtdec.h b/include/fdtdec.h
index 27887c8..d074478 100644
--- a/include/fdtdec.h
+++ b/include/fdtdec.h
@@ -976,6 +976,40 @@
*/
int fdtdec_decode_display_timing(const void *blob, int node, int index,
struct display_timing *config);
+
+/**
+ * fdtdec_setup_memory_size() - decode and setup gd->ram_size
+ *
+ * Decode the /memory 'reg' property to determine the size of the first memory
+ * bank, populate the global data with the size of the first bank of memory.
+ *
+ * This function should be called from a boards dram_init(). This helper
+ * function allows for boards to query the device tree for DRAM size instead of
+ * hard coding the value in the case where the memory size cannot be detected
+ * automatically.
+ *
+ * @return 0 if OK, -EINVAL if the /memory node or reg property is missing or
+ * invalid
+ */
+int fdtdec_setup_memory_size(void);
+
+/**
+ * fdtdec_setup_memory_banksize() - decode and populate gd->bd->bi_dram
+ *
+ * Decode the /memory 'reg' property to determine the address and size of the
+ * memory banks. Use this data to populate the global data board info with the
+ * phys address and size of memory banks.
+ *
+ * This function should be called from a boards dram_init_banksize(). This
+ * helper function allows for boards to query the device tree for memory bank
+ * information instead of hard coding the information in cases where it cannot
+ * be detected automatically.
+ *
+ * @return 0 if OK, -EINVAL if the /memory node or reg property is missing or
+ * invalid
+ */
+int fdtdec_setup_memory_banksize(void);
+
/**
* Set up the device tree ready for use
*/
diff --git a/include/miiphy.h b/include/miiphy.h
index 83141b4..fe8928a 100644
--- a/include/miiphy.h
+++ b/include/miiphy.h
@@ -48,6 +48,15 @@
struct mii_dev *mdio_alloc(void);
void mdio_free(struct mii_dev *bus);
int mdio_register(struct mii_dev *bus);
+
+/**
+ * mdio_register_seq - Register mdio bus with sequence number
+ * @bus: mii device structure
+ * @seq: sequence number
+ *
+ * Return: 0 if success, negative value if error
+ */
+int mdio_register_seq(struct mii_dev *bus, int seq);
int mdio_unregister(struct mii_dev *bus);
void mdio_list_devices(void);
diff --git a/include/ns16550.h b/include/ns16550.h
index 1311f4c..7c97036 100644
--- a/include/ns16550.h
+++ b/include/ns16550.h
@@ -57,6 +57,7 @@
int reg_shift;
int clock;
int reg_offset;
+ u32 fcr;
};
struct udevice;
@@ -117,6 +118,9 @@
#define UART_FCR_RXSR 0x02 /* Receiver soft reset */
#define UART_FCR_TXSR 0x04 /* Transmitter soft reset */
+/* Ingenic JZ47xx specific UART-enable bit. */
+#define UART_FCR_UME 0x10
+
/*
* These are the definitions for the Modem Control Register
*/
diff --git a/include/power/pfuze3000_pmic.h b/include/power/pfuze3000_pmic.h
index e8b892b..7d66ba4 100644
--- a/include/power/pfuze3000_pmic.h
+++ b/include/power/pfuze3000_pmic.h
@@ -75,4 +75,9 @@
int power_pfuze3000_init(unsigned char bus);
+/* Voltage Configuration */
+#define PFUZE3000_SW1AB_SETP(x) ((x - 7000) / 250)
+#define PFUZE3000_SW3_SETP(x) ((x - 9000) / 500)
+#define PFUZE3000_VLDO_SETP(x) ((x - 8000) / 500)
+
#endif
diff --git a/include/sata.h b/include/sata.h
index b35359a..d18cc9a 100644
--- a/include/sata.h
+++ b/include/sata.h
@@ -2,6 +2,7 @@
#define __SATA_H__
#include <part.h>
+#if !defined(CONFIG_DM_SCSI)
int init_sata(int dev);
int reset_sata(int dev);
int scan_sata(int dev);
@@ -15,5 +16,6 @@
int sata_port_status(int dev, int port);
extern struct blk_desc sata_dev_desc[];
+#endif
#endif
diff --git a/include/scsi.h b/include/scsi.h
index c879678..190dacd 100644
--- a/include/scsi.h
+++ b/include/scsi.h
@@ -166,8 +166,11 @@
void scsi_print_error(ccb *pccb);
int scsi_exec(ccb *pccb);
void scsi_bus_reset(void);
+#if !defined(CONFIG_DM_SCSI)
void scsi_low_level_init(int busdevfunc);
-
+#else
+void scsi_low_level_init(int busdevfunc, struct udevice *dev);
+#endif
/***************************************************************************
* functions residing inside cmd_scsi.c
@@ -175,6 +178,21 @@
void scsi_init(void);
int scsi_scan(int mode);
+#if defined(CONFIG_DM_SCSI)
+/**
+ * struct scsi_platdata - stores information about SCSI controller
+ *
+ * @base: Controller base address
+ * @max_lun: Maximum number of logical units
+ * @max_id: Maximum number of target ids
+ */
+struct scsi_platdata {
+ unsigned long base;
+ unsigned long max_lun;
+ unsigned long max_id;
+};
+#endif
+
#define SCSI_IDENTIFY 0xC0 /* not used */
/* Hardware errors */
diff --git a/lib/fdtdec.c b/lib/fdtdec.c
index 4e619c4..81f47ef 100644
--- a/lib/fdtdec.c
+++ b/lib/fdtdec.c
@@ -1174,6 +1174,62 @@
return ret;
}
+int fdtdec_setup_memory_size(void)
+{
+ int ret, mem;
+ struct fdt_resource res;
+
+ mem = fdt_path_offset(gd->fdt_blob, "/memory");
+ if (mem < 0) {
+ debug("%s: Missing /memory node\n", __func__);
+ return -EINVAL;
+ }
+
+ ret = fdt_get_resource(gd->fdt_blob, mem, "reg", 0, &res);
+ if (ret != 0) {
+ debug("%s: Unable to decode first memory bank\n", __func__);
+ return -EINVAL;
+ }
+
+ gd->ram_size = (phys_size_t)(res.end - res.start + 1);
+ debug("%s: Initial DRAM size %llx\n", __func__, (u64)gd->ram_size);
+
+ return 0;
+}
+
+#if defined(CONFIG_NR_DRAM_BANKS)
+int fdtdec_setup_memory_banksize(void)
+{
+ int bank, ret, mem;
+ struct fdt_resource res;
+
+ mem = fdt_path_offset(gd->fdt_blob, "/memory");
+ if (mem < 0) {
+ debug("%s: Missing /memory node\n", __func__);
+ return -EINVAL;
+ }
+
+ for (bank = 0; bank < CONFIG_NR_DRAM_BANKS; bank++) {
+ ret = fdt_get_resource(gd->fdt_blob, mem, "reg", bank, &res);
+ if (ret == -FDT_ERR_NOTFOUND)
+ break;
+ if (ret != 0)
+ return -EINVAL;
+
+ gd->bd->bi_dram[bank].start = (phys_addr_t)res.start;
+ gd->bd->bi_dram[bank].size =
+ (phys_size_t)(res.end - res.start + 1);
+
+ debug("%s: DRAM Bank #%d: start = 0x%llx, size = 0x%llx\n",
+ __func__, bank,
+ (unsigned long long)gd->bd->bi_dram[bank].start,
+ (unsigned long long)gd->bd->bi_dram[bank].size);
+ }
+
+ return 0;
+}
+#endif
+
int fdtdec_setup(void)
{
#if CONFIG_IS_ENABLED(OF_CONTROL)
diff --git a/scripts/Makefile.lib b/scripts/Makefile.lib
index 956a8a9..348de2d 100644
--- a/scripts/Makefile.lib
+++ b/scripts/Makefile.lib
@@ -164,10 +164,30 @@
ld_flags = $(LDFLAGS) $(ldflags-y)
+dts_dir = $(srctree)/arch/$(ARCH)/dts
+
+# Try these files in order to find the U-Boot-specific .dtsi include file
+u_boot_dtsi_options = $(wildcard $(dts_dir)/$(basename $(notdir $<))-u-boot.dtsi) \
+ $(wildcard $(dts_dir)/$(subst $\",,$(CONFIG_SYS_SOC))-u-boot.dtsi) \
+ $(wildcard $(dts_dir)/$(subst $\",,$(CONFIG_SYS_CPU))-u-boot.dtsi) \
+ $(wildcard $(dts_dir)/$(subst $\",,$(CONFIG_SYS_VENDOR))-u-boot.dtsi) \
+ $(wildcard $(dts_dir)/u-boot.dtsi)
+
+# Uncomment for debugging
+# $(warning u_boot_dtsi_options: $(u_boot_dtsi_options))
+
+# We use the first match
+u_boot_dtsi = $(firstword $(u_boot_dtsi_options))
+
# Modified for U-Boot
dtc_cpp_flags = -Wp,-MD,$(depfile).pre.tmp -nostdinc \
-I$(srctree)/arch/$(ARCH)/dts \
-I$(srctree)/arch/$(ARCH)/dts/include \
+ -Iinclude \
+ -I$(srctree)/include \
+ -I$(srctree)/arch/$(ARCH)/include \
+ -include $(srctree)/include/linux/kconfig.h \
+ -D__ASSEMBLY__ \
-undef -D__DTS__
# Finds the multi-part object the current object will be linked into
@@ -288,8 +308,11 @@
quiet_cmd_dtc = DTC $@
# Modified for U-Boot
+# Bring in any U-Boot-specific include after the '/dts-v1/;' header
cmd_dtc = mkdir -p $(dir ${dtc-tmp}) ; \
- $(CPP) $(dtc_cpp_flags) -x assembler-with-cpp -o $(dtc-tmp) $< ; \
+ cat $< $(if $(u_boot_dtsi),\
+ | sed 's%^/ {$$%\#include \"$(u_boot_dtsi)\"\n&%') | \
+ $(CPP) $(dtc_cpp_flags) -x assembler-with-cpp -o $(dtc-tmp) - ; \
$(DTC) -O dtb -o $@ -b 0 \
-i $(dir $<) $(DTC_FLAGS) \
-d $(depfile).dtc.tmp $(dtc-tmp) ; \
diff --git a/tools/binman/.gitignore b/tools/binman/.gitignore
new file mode 100644
index 0000000..0d20b64
--- /dev/null
+++ b/tools/binman/.gitignore
@@ -0,0 +1 @@
+*.pyc
diff --git a/tools/binman/README b/tools/binman/README
new file mode 100644
index 0000000..cb47e73
--- /dev/null
+++ b/tools/binman/README
@@ -0,0 +1,541 @@
+# Copyright (c) 2016 Google, Inc
+#
+# SPDX-License-Identifier: GPL-2.0+
+#
+
+Introduction
+------------
+
+Firmware often consists of several components which must be packaged together.
+For example, we may have SPL, U-Boot, a device tree and an environment area
+grouped together and placed in MMC flash. When the system starts, it must be
+able to find these pieces.
+
+So far U-Boot has not provided a way to handle creating such images in a
+general way. Each SoC does what it needs to build an image, often packing or
+concatenating images in the U-Boot build system.
+
+Binman aims to provide a mechanism for building images, from simple
+SPL + U-Boot combinations, to more complex arrangements with many parts.
+
+
+What it does
+------------
+
+Binman reads your board's device tree and finds a node which describes the
+required image layout. It uses this to work out what to place where. The
+output file normally contains the device tree, so it is in principle possible
+to read an image and extract its constituent parts.
+
+
+Features
+--------
+
+So far binman is pretty simple. It supports binary blobs, such as 'u-boot',
+'spl' and 'fdt'. It supports empty entries (such as setting to 0xff). It can
+place entries at a fixed location in the image, or fit them together with
+suitable padding and alignment. It provides a way to process binaries before
+they are included, by adding a Python plug-in. The device tree is available
+to U-Boot at run-time so that the images can be interpreted.
+
+Binman does not yet update the device tree with the final location of
+everything when it is done. A simple C structure could be generated for
+constrained environments like SPL (using dtoc) but this is also not
+implemented.
+
+Binman can also support incorporating filesystems in the image if required.
+For example x86 platforms may use CBFS in some cases.
+
+Binman is intended for use with U-Boot but is designed to be general enough
+to be useful in other image-packaging situations.
+
+
+Motivation
+----------
+
+Packaging of firmware is quite a different task from building the various
+parts. In many cases the various binaries which go into the image come from
+separate build systems. For example, ARM Trusted Firmware is used on ARMv8
+devices but is not built in the U-Boot tree. If a Linux kernel is included
+in the firmware image, it is built elsewhere.
+
+It is of course possible to add more and more build rules to the U-Boot
+build system to cover these cases. It can shell out to other Makefiles and
+build scripts. But it seems better to create a clear divide between building
+software and packaging it.
+
+At present this is handled by manual instructions, different for each board,
+on how to create images that will boot. By turning these instructions into a
+standard format, we can support making valid images for any board without
+manual effort, lots of READMEs, etc.
+
+Benefits:
+- Each binary can have its own build system and tool chain without creating
+any dependencies between them
+- Avoids the need for a single-shot build: individual parts can be updated
+and brought in as needed
+- Provides for a standard image description available in the build and at
+run-time
+- SoC-specific image-signing tools can be accomodated
+- Avoids cluttering the U-Boot build system with image-building code
+- The image description is automatically available at run-time in U-Boot,
+SPL. It can be made available to other software also
+- The image description is easily readable (it's a text file in device-tree
+format) and permits flexible packing of binaries
+
+
+Terminology
+-----------
+
+Binman uses the following terms:
+
+- image - an output file containing a firmware image
+- binary - an input binary that goes into the image
+
+
+Relationship to FIT
+-------------------
+
+FIT is U-Boot's official image format. It supports multiple binaries with
+load / execution addresses, compression. It also supports verification
+through hashing and RSA signatures.
+
+FIT was originally designed to support booting a Linux kernel (with an
+optional ramdisk) and device tree chosen from various options in the FIT.
+Now that U-Boot supports configuration via device tree, it is possible to
+load U-Boot from a FIT, with the device tree chosen by SPL.
+
+Binman considers FIT to be one of the binaries it can place in the image.
+
+Where possible it is best to put as much as possible in the FIT, with binman
+used to deal with cases not covered by FIT. Examples include initial
+execution (since FIT itself does not have an executable header) and dealing
+with device boundaries, such as the read-only/read-write separation in SPI
+flash.
+
+For U-Boot, binman should not be used to create ad-hoc images in place of
+FIT.
+
+
+Relationship to mkimage
+-----------------------
+
+The mkimage tool provides a means to create a FIT. Traditionally it has
+needed an image description file: a device tree, like binman, but in a
+different format. More recently it has started to support a '-f auto' mode
+which can generate that automatically.
+
+More relevant to binman, mkimage also permits creation of many SoC-specific
+image types. These can be listed by running 'mkimage -T list'. Examples
+include 'rksd', the Rockchip SD/MMC boot format. The mkimage tool is often
+called from the U-Boot build system for this reason.
+
+Binman considers the output files created by mkimage to be binary blobs
+which it can place in an image. Binman does not replace the mkimage tool or
+this purpose. It would be possible in some situtions to create a new entry
+type for the images in mkimage, but this would not add functionality. It
+seems better to use the mkiamge tool to generate binaries and avoid blurring
+the boundaries between building input files (mkimage) and packaging then
+into a final image (binman).
+
+
+Example use of binman in U-Boot
+-------------------------------
+
+Binman aims to replace some of the ad-hoc image creation in the U-Boot
+build system.
+
+Consider sunxi. It has the following steps:
+
+1. It uses a custom mksunxiboot tool to build an SPL image called
+sunxi-spl.bin. This should probably move into mkimage.
+
+2. It uses mkimage to package U-Boot into a legacy image file (so that it can
+hold the load and execution address) called u-boot.img.
+
+3. It builds a final output image called u-boot-sunxi-with-spl.bin which
+consists of sunxi-spl.bin, some padding and u-boot.img.
+
+Binman is intended to replace the last step. The U-Boot build system builds
+u-boot.bin and sunxi-spl.bin. Binman can then take over creation of
+sunxi-spl.bin (by calling mksunxiboot, or hopefully one day mkimage). In any
+case, it would then create the image from the component parts.
+
+This simplifies the U-Boot Makefile somewhat, since various pieces of logic
+can be replaced by a call to binman.
+
+
+Example use of binman for x86
+-----------------------------
+
+In most cases x86 images have a lot of binary blobs, 'black-box' code
+provided by Intel which must be run for the platform to work. Typically
+these blobs are not relocatable and must be placed at fixed areas in the
+firmare image.
+
+Currently this is handled by ifdtool, which places microcode, FSP, MRC, VGA
+BIOS, reference code and Intel ME binaries into a u-boot.rom file.
+
+Binman is intended to replace all of this, with ifdtool left to handle only
+the configuration of the Intel-format descriptor.
+
+
+Running binman
+--------------
+
+Type:
+
+ binman -b <board_name>
+
+to build an image for a board. The board name is the same name used when
+configuring U-Boot (e.g. for sandbox_defconfig the board name is 'sandbox').
+Binman assumes that the input files for the build are in ../b/<board_name>.
+
+Or you can specify this explicitly:
+
+ binman -I <build_path>
+
+where <build_path> is the build directory containing the output of the U-Boot
+build.
+
+(Future work will make this more configurable)
+
+In either case, binman picks up the device tree file (u-boot.dtb) and looks
+for its instructions in the 'binman' node.
+
+Binman has a few other options which you can see by running 'binman -h'.
+
+
+Image description format
+------------------------
+
+The binman node is called 'binman'. An example image description is shown
+below:
+
+ binman {
+ filename = "u-boot-sunxi-with-spl.bin";
+ pad-byte = <0xff>;
+ blob {
+ filename = "spl/sunxi-spl.bin";
+ };
+ u-boot {
+ pos = <CONFIG_SPL_PAD_TO>;
+ };
+ };
+
+
+This requests binman to create an image file called u-boot-sunxi-with-spl.bin
+consisting of a specially formatted SPL (spl/sunxi-spl.bin, built by the
+normal U-Boot Makefile), some 0xff padding, and a U-Boot legacy image. The
+padding comes from the fact that the second binary is placed at
+CONFIG_SPL_PAD_TO. If that line were omitted then the U-Boot binary would
+immediately follow the SPL binary.
+
+The binman node describes an image. The sub-nodes describe entries in the
+image. Each entry represents a region within the overall image. The name of
+the entry (blob, u-boot) tells binman what to put there. For 'blob' we must
+provide a filename. For 'u-boot', binman knows that this means 'u-boot.bin'.
+
+Entries are normally placed into the image sequentially, one after the other.
+The image size is the total size of all entries. As you can see, you can
+specify the start position of an entry using the 'pos' property.
+
+Note that due to a device tree requirement, all entries must have a unique
+name. If you want to put the same binary in the image multiple times, you can
+use any unique name, with the 'type' property providing the type.
+
+The attributes supported for entries are described below.
+
+pos:
+ This sets the position of an entry within the image. The first byte
+ of the image is normally at position 0. If 'pos' is not provided,
+ binman sets it to the end of the previous region, or the start of
+ the image's entry area (normally 0) if there is no previous region.
+
+align:
+ This sets the alignment of the entry. The entry position is adjusted
+ so that the entry starts on an aligned boundary within the image. For
+ example 'align = <16>' means that the entry will start on a 16-byte
+ boundary. Alignment shold be a power of 2. If 'align' is not
+ provided, no alignment is performed.
+
+size:
+ This sets the size of the entry. The contents will be padded out to
+ this size. If this is not provided, it will be set to the size of the
+ contents.
+
+pad-before:
+ Padding before the contents of the entry. Normally this is 0, meaning
+ that the contents start at the beginning of the entry. This can be
+ offset the entry contents a little. Defaults to 0.
+
+pad-after:
+ Padding after the contents of the entry. Normally this is 0, meaning
+ that the entry ends at the last byte of content (unless adjusted by
+ other properties). This allows room to be created in the image for
+ this entry to expand later. Defaults to 0.
+
+align-size:
+ This sets the alignment of the entry size. For example, to ensure
+ that the size of an entry is a multiple of 64 bytes, set this to 64.
+ If 'align-size' is not provided, no alignment is performed.
+
+align-end:
+ This sets the alignment of the end of an entry. Some entries require
+ that they end on an alignment boundary, regardless of where they
+ start. If 'align-end' is not provided, no alignment is performed.
+
+ Note: This is not yet implemented in binman.
+
+filename:
+ For 'blob' types this provides the filename containing the binary to
+ put into the entry. If binman knows about the entry type (like
+ u-boot-bin), then there is no need to specify this.
+
+type:
+ Sets the type of an entry. This defaults to the entry name, but it is
+ possible to use any name, and then add (for example) 'type = "u-boot"'
+ to specify the type.
+
+
+The attributes supported for images are described below. Several are similar
+to those for entries.
+
+size:
+ Sets the image size in bytes, for example 'size = <0x100000>' for a
+ 1MB image.
+
+align-size:
+ This sets the alignment of the image size. For example, to ensure
+ that the image ends on a 512-byte boundary, use 'align-size = <512>'.
+ If 'align-size' is not provided, no alignment is performed.
+
+pad-before:
+ This sets the padding before the image entries. The first entry will
+ be positionad after the padding. This defaults to 0.
+
+pad-after:
+ This sets the padding after the image entries. The padding will be
+ placed after the last entry. This defaults to 0.
+
+pad-byte:
+ This specifies the pad byte to use when padding in the image. It
+ defaults to 0. To use 0xff, you would add 'pad-byte = <0xff>'.
+
+filename:
+ This specifies the image filename. It defaults to 'image.bin'.
+
+sort-by-pos:
+ This causes binman to reorder the entries as needed to make sure they
+ are in increasing positional order. This can be used when your entry
+ order may not match the positional order. A common situation is where
+ the 'pos' properties are set by CONFIG options, so their ordering is
+ not known a priori.
+
+ This is a boolean property so needs no value. To enable it, add a
+ line 'sort-by-pos;' to your description.
+
+multiple-images:
+ Normally only a single image is generated. To create more than one
+ image, put this property in the binman node. For example, this will
+ create image1.bin containing u-boot.bin, and image2.bin containing
+ both spl/u-boot-spl.bin and u-boot.bin:
+
+ binman {
+ multiple-images;
+ image1 {
+ u-boot {
+ };
+ };
+
+ image2 {
+ spl {
+ };
+ u-boot {
+ };
+ };
+ };
+
+end-at-4gb:
+ For x86 machines the ROM positions start just before 4GB and extend
+ up so that the image finished at the 4GB boundary. This boolean
+ option can be enabled to support this. The image size must be
+ provided so that binman knows when the image should start. For an
+ 8MB ROM, the position of the first entry would be 0xfff80000 with
+ this option, instead of 0 without this option.
+
+
+Examples of the above options can be found in the tests. See the
+tools/binman/test directory.
+
+
+Special properties
+------------------
+
+Some entries support special properties, documented here:
+
+u-boot-with-ucode-ptr:
+ optional-ucode: boolean property to make microcode optional. If the
+ u-boot.bin image does not include microcode, no error will
+ be generated.
+
+
+Order of image creation
+-----------------------
+
+Image creation proceeds in the following order, for each entry in the image.
+
+1. GetEntryContents() - the contents of each entry are obtained, normally by
+reading from a file. This calls the Entry.ObtainContents() to read the
+contents. The default version of Entry.ObtainContents() calls
+Entry.GetDefaultFilename() and then reads that file. So a common mechanism
+to select a file to read is to override that function in the subclass. The
+functions must return True when they have read the contents. Binman will
+retry calling the functions a few times if False is returned, allowing
+dependencies between the contents of different entries.
+
+2. GetEntryPositions() - calls Entry.GetPositions() for each entry. This can
+return a dict containing entries that need updating. The key should be the
+entry name and the value is a tuple (pos, size). This allows an entry to
+provide the position and size for other entries. The default implementation
+of GetEntryPositions() returns {}.
+
+3. PackEntries() - calls Entry.Pack() which figures out the position and
+size of an entry. The 'current' image position is passed in, and the function
+returns the position immediately after the entry being packed. The default
+implementation of Pack() is usually sufficient.
+
+4. CheckSize() - checks that the contents of all the entries fits within
+the image size. If the image does not have a defined size, the size is set
+large enough to hold all the entries.
+
+5. CheckEntries() - checks that the entries do not overlap, nor extend
+outside the image.
+
+6. ProcessEntryContents() - this calls Entry.ProcessContents() on each entry.
+The default implementatoin does nothing. This can be overriden to adjust the
+contents of an entry in some way. For example, it would be possible to create
+an entry containing a hash of the contents of some other entries. At this
+stage the position and size of entries should not be adjusted.
+
+7. BuildImage() - builds the image and writes it to a file. This is the final
+step.
+
+
+Automatic .dtsi inclusion
+-------------------------
+
+It is sometimes inconvenient to add a 'binman' node to the .dts file for each
+board. This can be done by using #include to bring in a common file. Another
+approach supported by the U-Boot build system is to automatically include
+a common header. You can then put the binman node (and anything else that is
+specific to U-Boot, such as u-boot,dm-pre-reloc properies) in that header
+file.
+
+Binman will search for the following files in arch/<arch>/dts:
+
+ <dts>-u-boot.dtsi where <dts> is the base name of the .dts file
+ <CONFIG_SYS_SOC>-u-boot.dtsi
+ <CONFIG_SYS_CPU>-u-boot.dtsi
+ <CONFIG_SYS_VENDOR>-u-boot.dtsi
+ u-boot.dtsi
+
+U-Boot will only use the first one that it finds. If you need to include a
+more general file you can do that from the more specific file using #include.
+If you are having trouble figuring out what is going on, you can uncomment
+the 'warning' line in scripts/Makefile.lib to see what it has found:
+
+ # Uncomment for debugging
+ # $(warning binman_dtsi_options: $(binman_dtsi_options))
+
+
+Code coverage
+-------------
+
+Binman is a critical tool and is designed to be very testable. Entry
+implementations target 100% test coverage. Run 'binman -T' to check this.
+
+To enable Python test coverage on Debian-type distributions (e.g. Ubuntu):
+
+ $ sudo apt-get install python-pip python-pytest
+ $ sudo pip install coverage
+
+
+Advanced Features / Technical docs
+----------------------------------
+
+The behaviour of entries is defined by the Entry class. All other entries are
+a subclass of this. An important subclass is Entry_blob which takes binary
+data from a file and places it in the entry. In fact most entry types are
+subclasses of Entry_blob.
+
+Each entry type is a separate file in the tools/binman/etype directory. Each
+file contains a class called Entry_<type> where <type> is the entry type.
+New entry types can be supported by adding new files in that directory.
+These will automatically be detected by binman when needed.
+
+Entry properties are documented in entry.py. The entry subclasses are free
+to change the values of properties to support special behaviour. For example,
+when Entry_blob loads a file, it sets content_size to the size of the file.
+Entry classes can adjust other entries. For example, an entry that knows
+where other entries should be positioned can set up those entries' positions
+so they don't need to be set in the binman decription. It can also adjust
+entry contents.
+
+Most of the time such essoteric behaviour is not needed, but it can be
+essential for complex images.
+
+
+History / Credits
+-----------------
+
+Binman takes a lot of inspiration from a Chrome OS tool called
+'cros_bundle_firmware', which I wrote some years ago. That tool was based on
+a reasonably simple and sound design but has expanded greatly over the
+years. In particular its handling of x86 images is convoluted.
+
+Quite a few lessons have been learned which are hopefully be applied here.
+
+
+Design notes
+------------
+
+On the face of it, a tool to create firmware images should be fairly simple:
+just find all the input binaries and place them at the right place in the
+image. The difficulty comes from the wide variety of input types (simple
+flat binaries containing code, packaged data with various headers), packing
+requirments (alignment, spacing, device boundaries) and other required
+features such as hierarchical images.
+
+The design challenge is to make it easy to create simple images, while
+allowing the more complex cases to be supported. For example, for most
+images we don't much care exactly where each binary ends up, so we should
+not have to specify that unnecessarily.
+
+New entry types should aim to provide simple usage where possible. If new
+core features are needed, they can be added in the Entry base class.
+
+
+To do
+-----
+
+Some ideas:
+- Fill out the device tree to include the final position and size of each
+ entry (since the input file may not always specify these)
+- Use of-platdata to make the information available to code that is unable
+ to use device tree (such as a very small SPL image)
+- Write an image map to a text file
+- Allow easy building of images by specifying just the board name
+- Produce a full Python binding for libfdt (for upstream)
+- Add an option to decode an image into the constituent binaries
+- Suppoort hierarchical images (packing of binaries into another binary
+ which is then placed in the image)
+- Support building an image for a board (-b) more completely, with a
+ configurable build directory
+- Consider making binman work with buildman, although if it is used in the
+ Makefile, this will be automatic
+- Implement align-end
+
+--
+Simon Glass <sjg@chromium.org>
+7/7/2016
diff --git a/tools/binman/binman b/tools/binman/binman
new file mode 120000
index 0000000..979b7e4
--- /dev/null
+++ b/tools/binman/binman
@@ -0,0 +1 @@
+binman.py
\ No newline at end of file
diff --git a/tools/binman/binman.py b/tools/binman/binman.py
new file mode 100755
index 0000000..7fb67cb
--- /dev/null
+++ b/tools/binman/binman.py
@@ -0,0 +1,114 @@
+#!/usr/bin/python
+
+# Copyright (c) 2016 Google, Inc
+# Written by Simon Glass <sjg@chromium.org>
+#
+# SPDX-License-Identifier: GPL-2.0+
+#
+# Creates binary images from input files controlled by a description
+#
+
+"""See README for more information"""
+
+import os
+import sys
+import traceback
+import unittest
+
+# Bring in the patman and dtoc libraries
+our_path = os.path.dirname(os.path.realpath(__file__))
+sys.path.append(os.path.join(our_path, '../patman'))
+sys.path.append(os.path.join(our_path, '../dtoc'))
+
+# Also allow entry-type modules to be brought in from the etype directory.
+sys.path.append(os.path.join(our_path, 'etype'))
+
+import cmdline
+import command
+import control
+
+def RunTests():
+ """Run the functional tests and any embedded doctests"""
+ import entry_test
+ import fdt_test
+ import func_test
+ import test
+ import doctest
+
+ result = unittest.TestResult()
+ for module in []:
+ suite = doctest.DocTestSuite(module)
+ suite.run(result)
+
+ sys.argv = [sys.argv[0]]
+ for module in (func_test.TestFunctional, fdt_test.TestFdt,
+ entry_test.TestEntry):
+ suite = unittest.TestLoader().loadTestsFromTestCase(module)
+ suite.run(result)
+
+ print result
+ for test, err in result.errors:
+ print test.id(), err
+ for test, err in result.failures:
+ print err
+
+def RunTestCoverage():
+ """Run the tests and check that we get 100% coverage"""
+ # This uses the build output from sandbox_spl to get _libfdt.so
+ cmd = ('PYTHONPATH=%s/sandbox_spl/tools coverage run '
+ '--include "tools/binman/*.py" --omit "*test*,*binman.py" '
+ 'tools/binman/binman.py -t' % options.build_dir)
+ os.system(cmd)
+ stdout = command.Output('coverage', 'report')
+ coverage = stdout.splitlines()[-1].split(' ')[-1]
+ if coverage != '100%':
+ print stdout
+ print "Type 'coverage html' to get a report in htmlcov/index.html"
+ raise ValueError('Coverage error: %s, but should be 100%%' % coverage)
+
+
+def RunBinman(options, args):
+ """Main entry point to binman once arguments are parsed
+
+ Args:
+ options: Command-line options
+ args: Non-option arguments
+ """
+ ret_code = 0
+
+ # For testing: This enables full exception traces.
+ #options.debug = True
+
+ if not options.debug:
+ sys.tracebacklimit = 0
+
+ if options.test:
+ RunTests()
+
+ elif options.test_coverage:
+ RunTestCoverage()
+
+ elif options.full_help:
+ pager = os.getenv('PAGER')
+ if not pager:
+ pager = 'more'
+ fname = os.path.join(os.path.dirname(os.path.realpath(sys.argv[0])),
+ 'README')
+ command.Run(pager, fname)
+
+ else:
+ try:
+ ret_code = control.Binman(options, args)
+ except Exception as e:
+ print 'binman: %s' % e
+ if options.debug:
+ print
+ traceback.print_exc()
+ ret_code = 1
+ return ret_code
+
+
+if __name__ == "__main__":
+ (options, args) = cmdline.ParseArgs(sys.argv)
+ ret_code = RunBinman(options, args)
+ sys.exit(ret_code)
diff --git a/tools/binman/cmdline.py b/tools/binman/cmdline.py
new file mode 100644
index 0000000..233d5e1
--- /dev/null
+++ b/tools/binman/cmdline.py
@@ -0,0 +1,53 @@
+# Copyright (c) 2016 Google, Inc
+# Written by Simon Glass <sjg@chromium.org>
+#
+# SPDX-License-Identifier: GPL-2.0+
+#
+# Command-line parser for binman
+#
+
+from optparse import OptionParser
+
+def ParseArgs(argv):
+ """Parse the binman command-line arguments
+
+ Args:
+ argv: List of string arguments
+ Returns:
+ Tuple (options, args) with the command-line options and arugments.
+ options provides access to the options (e.g. option.debug)
+ args is a list of string arguments
+ """
+ parser = OptionParser()
+ parser.add_option('-b', '--board', type='string',
+ help='Board name to build')
+ parser.add_option('-B', '--build-dir', type='string', default='b',
+ help='Directory containing the build output')
+ parser.add_option('-d', '--dt', type='string',
+ help='Configuration file (.dtb) to use')
+ parser.add_option('-D', '--debug', action='store_true',
+ help='Enabling debugging (provides a full traceback on error)')
+ parser.add_option('-I', '--indir', action='append',
+ help='Add a path to a directory to use for input files')
+ parser.add_option('-H', '--full-help', action='store_true',
+ default=False, help='Display the README file')
+ parser.add_option('-O', '--outdir', type='string',
+ action='store', help='Path to directory to use for intermediate and '
+ 'output files')
+ parser.add_option('-p', '--preserve', action='store_true',\
+ help='Preserve temporary output directory even if option -O is not '
+ 'given')
+ parser.add_option('-t', '--test', action='store_true',
+ default=False, help='run tests')
+ parser.add_option('-T', '--test-coverage', action='store_true',
+ default=False, help='run tests and check for 100% coverage')
+ parser.add_option('-v', '--verbosity', default=1,
+ type='int', help='Control verbosity: 0=silent, 1=progress, 3=full, '
+ '4=debug')
+
+ parser.usage += """
+
+Create images for a board from a set of binaries. It is controlled by a
+description in the board device tree."""
+
+ return parser.parse_args(argv)
diff --git a/tools/binman/control.py b/tools/binman/control.py
new file mode 100644
index 0000000..e909678
--- /dev/null
+++ b/tools/binman/control.py
@@ -0,0 +1,118 @@
+# Copyright (c) 2016 Google, Inc
+# Written by Simon Glass <sjg@chromium.org>
+#
+# SPDX-License-Identifier: GPL-2.0+
+#
+# Creates binary images from input files controlled by a description
+#
+
+from collections import OrderedDict
+import os
+import sys
+import tools
+
+import command
+import fdt_select
+import fdt_util
+from image import Image
+import tout
+
+# List of images we plan to create
+# Make this global so that it can be referenced from tests
+images = OrderedDict()
+
+def _ReadImageDesc(binman_node):
+ """Read the image descriptions from the /binman node
+
+ This normally produces a single Image object called 'image'. But if
+ multiple images are present, they will all be returned.
+
+ Args:
+ binman_node: Node object of the /binman node
+ Returns:
+ OrderedDict of Image objects, each of which describes an image
+ """
+ images = OrderedDict()
+ if 'multiple-images' in binman_node.props:
+ for node in binman_node.subnodes:
+ images[node.name] = Image(node.name, node)
+ else:
+ images['image'] = Image('image', binman_node)
+ return images
+
+def _FindBinmanNode(fdt):
+ """Find the 'binman' node in the device tree
+
+ Args:
+ fdt: Fdt object to scan
+ Returns:
+ Node object of /binman node, or None if not found
+ """
+ for node in fdt.GetRoot().subnodes:
+ if node.name == 'binman':
+ return node
+ return None
+
+def Binman(options, args):
+ """The main control code for binman
+
+ This assumes that help and test options have already been dealt with. It
+ deals with the core task of building images.
+
+ Args:
+ options: Command line options object
+ args: Command line arguments (list of strings)
+ """
+ global images
+
+ if options.full_help:
+ pager = os.getenv('PAGER')
+ if not pager:
+ pager = 'more'
+ fname = os.path.join(os.path.dirname(os.path.realpath(sys.argv[0])),
+ 'README')
+ command.Run(pager, fname)
+ return 0
+
+ # Try to figure out which device tree contains our image description
+ if options.dt:
+ dtb_fname = options.dt
+ else:
+ board = options.board
+ if not board:
+ raise ValueError('Must provide a board to process (use -b <board>)')
+ board_pathname = os.path.join(options.build_dir, board)
+ dtb_fname = os.path.join(board_pathname, 'u-boot.dtb')
+ if not options.indir:
+ options.indir = ['.']
+ options.indir.append(board_pathname)
+
+ try:
+ tout.Init(options.verbosity)
+ try:
+ tools.SetInputDirs(options.indir)
+ tools.PrepareOutputDir(options.outdir, options.preserve)
+ fdt = fdt_select.FdtScan(dtb_fname)
+ node = _FindBinmanNode(fdt)
+ if not node:
+ raise ValueError("Device tree '%s' does not have a 'binman' "
+ "node" % dtb_fname)
+ images = _ReadImageDesc(node)
+ for image in images.values():
+ # Perform all steps for this image, including checking and
+ # writing it. This means that errors found with a later
+ # image will be reported after earlier images are already
+ # completed and written, but that does not seem important.
+ image.GetEntryContents()
+ image.GetEntryPositions()
+ image.PackEntries()
+ image.CheckSize()
+ image.CheckEntries()
+ image.ProcessEntryContents()
+ image.BuildImage()
+ finally:
+ tools.FinaliseOutputDir()
+ finally:
+ tout.Uninit()
+
+ return 0
diff --git a/tools/binman/entry_test.py b/tools/binman/entry_test.py
new file mode 100644
index 0000000..8a9ae01
--- /dev/null
+++ b/tools/binman/entry_test.py
@@ -0,0 +1,27 @@
+#
+# Copyright (c) 2016 Google, Inc
+# Written by Simon Glass <sjg@chromium.org>
+#
+# SPDX-License-Identifier: GPL-2.0+
+#
+# Test for the Entry class
+
+import collections
+import unittest
+
+import entry
+
+class TestEntry(unittest.TestCase):
+ def testEntryContents(self):
+ """Test the Entry bass class"""
+ base_entry = entry.Entry(None, None, None, read_node=False)
+ self.assertEqual(True, base_entry.ObtainContents())
+
+ def testUnknownEntry(self):
+ """Test that unknown entry types are detected"""
+ Node = collections.namedtuple('Node', ['name', 'path'])
+ node = Node('invalid-name', 'invalid-path')
+ with self.assertRaises(ValueError) as e:
+ entry.Entry.Create(None, node, node.name)
+ self.assertIn("Unknown entry type 'invalid-name' in node "
+ "'invalid-path'", str(e.exception))
diff --git a/tools/binman/etype/_testing.py b/tools/binman/etype/_testing.py
new file mode 100644
index 0000000..1783098
--- /dev/null
+++ b/tools/binman/etype/_testing.py
@@ -0,0 +1,26 @@
+# Copyright (c) 2016 Google, Inc
+# Written by Simon Glass <sjg@chromium.org>
+#
+# SPDX-License-Identifier: GPL-2.0+
+#
+# Entry-type module for testing purposes. Not used in real images.
+#
+
+from entry import Entry
+import fdt_util
+import tools
+
+class Entry__testing(Entry):
+ def __init__(self, image, etype, node):
+ Entry.__init__(self, image, etype, node)
+
+ def ObtainContents(self):
+ self.data = 'a'
+ self.contents_size = len(self.data)
+ return True
+
+ def ReadContents(self):
+ return True
+
+ def GetPositions(self):
+ return {'invalid-entry': [1, 2]}
diff --git a/tools/binman/etype/blob.py b/tools/binman/etype/blob.py
new file mode 100644
index 0000000..def2164
--- /dev/null
+++ b/tools/binman/etype/blob.py
@@ -0,0 +1,37 @@
+# Copyright (c) 2016 Google, Inc
+# Written by Simon Glass <sjg@chromium.org>
+#
+# SPDX-License-Identifier: GPL-2.0+
+#
+# Entry-type module for blobs, which are binary objects read from files
+#
+
+from entry import Entry
+import fdt_util
+import tools
+
+class Entry_blob(Entry):
+ def __init__(self, image, etype, node):
+ Entry.__init__(self, image, etype, node)
+ self._filename = fdt_util.GetString(self._node, "filename", self.etype)
+
+ def ObtainContents(self):
+ self._filename = self.GetDefaultFilename()
+ self._pathname = tools.GetInputFilename(self._filename)
+ self.ReadContents()
+ return True
+
+ def ReadContents(self):
+ with open(self._pathname) as fd:
+ # We assume the data is small enough to fit into memory. If this
+ # is used for large filesystem image that might not be true.
+ # In that case, Image.BuildImage() could be adjusted to use a
+ # new Entry method which can read in chunks. Then we could copy
+ # the data in chunks and avoid reading it all at once. For now
+ # this seems like an unnecessary complication.
+ self.data = fd.read()
+ self.contents_size = len(self.data)
+ return True
+
+ def GetDefaultFilename(self):
+ return self._filename
diff --git a/tools/binman/etype/entry.py b/tools/binman/etype/entry.py
new file mode 100644
index 0000000..67c5734
--- /dev/null
+++ b/tools/binman/etype/entry.py
@@ -0,0 +1,200 @@
+# Copyright (c) 2016 Google, Inc
+#
+# SPDX-License-Identifier: GPL-2.0+
+#
+# Base class for all entries
+#
+
+# importlib was introduced in Python 2.7 but there was a report of it not
+# working in 2.7.12, so we work around this:
+# http://lists.denx.de/pipermail/u-boot/2016-October/269729.html
+try:
+ import importlib
+ have_importlib = True
+except:
+ have_importlib = False
+
+import fdt_util
+import tools
+
+modules = {}
+
+class Entry(object):
+ """An Entry in the image
+
+ An entry corresponds to a single node in the device-tree description
+ of the image. Each entry ends up being a part of the final image.
+ Entries can be placed either right next to each other, or with padding
+ between them. The type of the entry determines the data that is in it.
+
+ This class is not used by itself. All entry objects are subclasses of
+ Entry.
+
+ Attributes:
+ image: The image containing this entry
+ node: The node that created this entry
+ pos: Absolute position of entry within the image, None if not known
+ size: Entry size in bytes, None if not known
+ contents_size: Size of contents in bytes, 0 by default
+ align: Entry start position alignment, or None
+ align_size: Entry size alignment, or None
+ align_end: Entry end position alignment, or None
+ pad_before: Number of pad bytes before the contents, 0 if none
+ pad_after: Number of pad bytes after the contents, 0 if none
+ data: Contents of entry (string of bytes)
+ """
+ def __init__(self, image, etype, node, read_node=True):
+ self.image = image
+ self.etype = etype
+ self._node = node
+ self.pos = None
+ self.size = None
+ self.contents_size = 0
+ self.align = None
+ self.align_size = None
+ self.align_end = None
+ self.pad_before = 0
+ self.pad_after = 0
+ self.pos_unset = False
+ if read_node:
+ self.ReadNode()
+
+ @staticmethod
+ def Create(image, node, etype=None):
+ """Create a new entry for a node.
+
+ Args:
+ image: Image object containing this node
+ node: Node object containing information about the entry to create
+ etype: Entry type to use, or None to work it out (used for tests)
+
+ Returns:
+ A new Entry object of the correct type (a subclass of Entry)
+ """
+ if not etype:
+ etype = fdt_util.GetString(node, 'type', node.name)
+ module_name = etype.replace('-', '_')
+ module = modules.get(module_name)
+
+ # Import the module if we have not already done so.
+ if not module:
+ try:
+ if have_importlib:
+ module = importlib.import_module(module_name)
+ else:
+ module = __import__(module_name)
+ except ImportError:
+ raise ValueError("Unknown entry type '%s' in node '%s'" %
+ (etype, node.path))
+ modules[module_name] = module
+
+ # Call its constructor to get the object we want.
+ obj = getattr(module, 'Entry_%s' % module_name)
+ return obj(image, etype, node)
+
+ def ReadNode(self):
+ """Read entry information from the node
+
+ This reads all the fields we recognise from the node, ready for use.
+ """
+ self.pos = fdt_util.GetInt(self._node, 'pos')
+ self.size = fdt_util.GetInt(self._node, 'size')
+ self.align = fdt_util.GetInt(self._node, 'align')
+ if tools.NotPowerOfTwo(self.align):
+ raise ValueError("Node '%s': Alignment %s must be a power of two" %
+ (self._node.path, self.align))
+ self.pad_before = fdt_util.GetInt(self._node, 'pad-before', 0)
+ self.pad_after = fdt_util.GetInt(self._node, 'pad-after', 0)
+ self.align_size = fdt_util.GetInt(self._node, 'align-size')
+ if tools.NotPowerOfTwo(self.align_size):
+ raise ValueError("Node '%s': Alignment size %s must be a power "
+ "of two" % (self._node.path, self.align_size))
+ self.align_end = fdt_util.GetInt(self._node, 'align-end')
+ self.pos_unset = fdt_util.GetBool(self._node, 'pos-unset')
+
+ def ObtainContents(self):
+ """Figure out the contents of an entry.
+
+ Returns:
+ True if the contents were found, False if another call is needed
+ after the other entries are processed.
+ """
+ # No contents by default: subclasses can implement this
+ return True
+
+ def Pack(self, pos):
+ """Figure out how to pack the entry into the image
+
+ Most of the time the entries are not fully specified. There may be
+ an alignment but no size. In that case we take the size from the
+ contents of the entry.
+
+ If an entry has no hard-coded position, it will be placed at @pos.
+
+ Once this function is complete, both the position and size of the
+ entry will be know.
+
+ Args:
+ Current image position pointer
+
+ Returns:
+ New image position pointer (after this entry)
+ """
+ if self.pos is None:
+ if self.pos_unset:
+ self.Raise('No position set with pos-unset: should another '
+ 'entry provide this correct position?')
+ self.pos = tools.Align(pos, self.align)
+ needed = self.pad_before + self.contents_size + self.pad_after
+ needed = tools.Align(needed, self.align_size)
+ size = self.size
+ if not size:
+ size = needed
+ new_pos = self.pos + size
+ aligned_pos = tools.Align(new_pos, self.align_end)
+ if aligned_pos != new_pos:
+ size = aligned_pos - self.pos
+ new_pos = aligned_pos
+
+ if not self.size:
+ self.size = size
+
+ if self.size < needed:
+ self.Raise("Entry contents size is %#x (%d) but entry size is "
+ "%#x (%d)" % (needed, needed, self.size, self.size))
+ # Check that the alignment is correct. It could be wrong if the
+ # and pos or size values were provided (i.e. not calculated), but
+ # conflict with the provided alignment values
+ if self.size != tools.Align(self.size, self.align_size):
+ self.Raise("Size %#x (%d) does not match align-size %#x (%d)" %
+ (self.size, self.size, self.align_size, self.align_size))
+ if self.pos != tools.Align(self.pos, self.align):
+ self.Raise("Position %#x (%d) does not match align %#x (%d)" %
+ (self.pos, self.pos, self.align, self.align))
+
+ return new_pos
+
+ def Raise(self, msg):
+ """Convenience function to raise an error referencing a node"""
+ raise ValueError("Node '%s': %s" % (self._node.path, msg))
+
+ def GetPath(self):
+ """Get the path of a node
+
+ Returns:
+ Full path of the node for this entry
+ """
+ return self._node.path
+
+ def GetData(self):
+ return self.data
+
+ def GetPositions(self):
+ return {}
+
+ def SetPositionSize(self, pos, size):
+ self.pos = pos
+ self.size = size
+
+ def ProcessContents(self):
+ pass
diff --git a/tools/binman/etype/intel_cmc.py b/tools/binman/etype/intel_cmc.py
new file mode 100644
index 0000000..9bce8ae
--- /dev/null
+++ b/tools/binman/etype/intel_cmc.py
@@ -0,0 +1,17 @@
+# Copyright (c) 2016 Google, Inc
+# Written by Simon Glass <sjg@chromium.org>
+#
+# SPDX-License-Identifier: GPL-2.0+
+#
+# Entry-type module for Intel Chip Microcode binary blob
+#
+
+from entry import Entry
+from blob import Entry_blob
+
+class Entry_intel_cmc(Entry_blob):
+ def __init__(self, image, etype, node):
+ Entry_blob.__init__(self, image, etype, node)
+
+ def GetDefaultFilename(self):
+ return 'cmc.bin'
diff --git a/tools/binman/etype/intel_descriptor.py b/tools/binman/etype/intel_descriptor.py
new file mode 100644
index 0000000..7f4ea0b
--- /dev/null
+++ b/tools/binman/etype/intel_descriptor.py
@@ -0,0 +1,55 @@
+# Copyright (c) 2016 Google, Inc
+# Written by Simon Glass <sjg@chromium.org>
+#
+# SPDX-License-Identifier: GPL-2.0+
+#
+# Entry-type module for 'u-boot'
+#
+
+import struct
+
+from entry import Entry
+from blob import Entry_blob
+
+FD_SIGNATURE = struct.pack('<L', 0x0ff0a55a)
+MAX_REGIONS = 5
+
+(REGION_DESCRIPTOR, REGION_BIOS, REGION_ME, REGION_GBE,
+ REGION_PDATA) = range(5)
+
+class Region:
+ def __init__(self, data, frba, region_num):
+ pos = frba + region_num * 4
+ val = struct.unpack('<L', data[pos:pos + 4])[0]
+ self.base = (val & 0xfff) << 12
+ self.limit = ((val & 0x0fff0000) >> 4) | 0xfff
+ self.size = self.limit - self.base + 1
+
+class Entry_intel_descriptor(Entry_blob):
+ """Intel flash descriptor block (4KB)
+
+ This is placed at the start of flash and provides information about
+ the SPI flash regions. In particular it provides the base address and
+ size of the ME region, allowing us to place the ME binary in the right
+ place.
+ """
+ def __init__(self, image, etype, node):
+ Entry_blob.__init__(self, image, etype, node)
+ self._regions = []
+
+ def GetDefaultFilename(self):
+ return 'descriptor.bin'
+
+ def GetPositions(self):
+ pos = self.data.find(FD_SIGNATURE)
+ if pos == -1:
+ self.Raise('Cannot find FD signature')
+ flvalsig, flmap0, flmap1, flmap2 = struct.unpack('<LLLL',
+ self.data[pos:pos + 16])
+ frba = ((flmap0 >> 16) & 0xff) << 4
+ for i in range(MAX_REGIONS):
+ self._regions.append(Region(self.data, frba, i))
+
+ # Set the offset for ME only, for now, since the others are not used
+ return {'intel-me': [self._regions[REGION_ME].base,
+ self._regions[REGION_ME].size]}
diff --git a/tools/binman/etype/intel_fsp.py b/tools/binman/etype/intel_fsp.py
new file mode 100644
index 0000000..d75be5b
--- /dev/null
+++ b/tools/binman/etype/intel_fsp.py
@@ -0,0 +1,17 @@
+# Copyright (c) 2016 Google, Inc
+# Written by Simon Glass <sjg@chromium.org>
+#
+# SPDX-License-Identifier: GPL-2.0+
+#
+# Entry-type module for Intel Firmware Support Package binary blob
+#
+
+from entry import Entry
+from blob import Entry_blob
+
+class Entry_intel_fsp(Entry_blob):
+ def __init__(self, image, etype, node):
+ Entry_blob.__init__(self, image, etype, node)
+
+ def GetDefaultFilename(self):
+ return 'fsp.bin'
diff --git a/tools/binman/etype/intel_me.py b/tools/binman/etype/intel_me.py
new file mode 100644
index 0000000..45ab50c
--- /dev/null
+++ b/tools/binman/etype/intel_me.py
@@ -0,0 +1,17 @@
+# Copyright (c) 2016 Google, Inc
+# Written by Simon Glass <sjg@chromium.org>
+#
+# SPDX-License-Identifier: GPL-2.0+
+#
+# Entry-type module for Intel Management Engine binary blob
+#
+
+from entry import Entry
+from blob import Entry_blob
+
+class Entry_intel_me(Entry_blob):
+ def __init__(self, image, etype, node):
+ Entry_blob.__init__(self, image, etype, node)
+
+ def GetDefaultFilename(self):
+ return 'me.bin'
diff --git a/tools/binman/etype/intel_mrc.py b/tools/binman/etype/intel_mrc.py
new file mode 100644
index 0000000..f6cedb7
--- /dev/null
+++ b/tools/binman/etype/intel_mrc.py
@@ -0,0 +1,17 @@
+# Copyright (c) 2016 Google, Inc
+# Written by Simon Glass <sjg@chromium.org>
+#
+# SPDX-License-Identifier: GPL-2.0+
+#
+# Entry-type module for Intel Memory Reference Code binary blob
+#
+
+from entry import Entry
+from blob import Entry_blob
+
+class Entry_intel_mrc(Entry_blob):
+ def __init__(self, image, etype, node):
+ Entry_blob.__init__(self, image, etype, node)
+
+ def GetDefaultFilename(self):
+ return 'mrc.bin'
diff --git a/tools/binman/etype/intel_vga.py b/tools/binman/etype/intel_vga.py
new file mode 100644
index 0000000..d8f270b
--- /dev/null
+++ b/tools/binman/etype/intel_vga.py
@@ -0,0 +1,17 @@
+# Copyright (c) 2016 Google, Inc
+# Written by Simon Glass <sjg@chromium.org>
+#
+# SPDX-License-Identifier: GPL-2.0+
+#
+# Entry-type module for x86 VGA ROM binary blob
+#
+
+from entry import Entry
+from blob import Entry_blob
+
+class Entry_intel_vga(Entry_blob):
+ def __init__(self, image, etype, node):
+ Entry_blob.__init__(self, image, etype, node)
+
+ def GetDefaultFilename(self):
+ return 'vga.bin'
diff --git a/tools/binman/etype/u_boot.py b/tools/binman/etype/u_boot.py
new file mode 100644
index 0000000..1fcff73
--- /dev/null
+++ b/tools/binman/etype/u_boot.py
@@ -0,0 +1,17 @@
+# Copyright (c) 2016 Google, Inc
+# Written by Simon Glass <sjg@chromium.org>
+#
+# SPDX-License-Identifier: GPL-2.0+
+#
+# Entry-type module for U-Boot binary
+#
+
+from entry import Entry
+from blob import Entry_blob
+
+class Entry_u_boot(Entry_blob):
+ def __init__(self, image, etype, node):
+ Entry_blob.__init__(self, image, etype, node)
+
+ def GetDefaultFilename(self):
+ return 'u-boot.bin'
diff --git a/tools/binman/etype/u_boot_dtb.py b/tools/binman/etype/u_boot_dtb.py
new file mode 100644
index 0000000..1122c95
--- /dev/null
+++ b/tools/binman/etype/u_boot_dtb.py
@@ -0,0 +1,17 @@
+# Copyright (c) 2016 Google, Inc
+# Written by Simon Glass <sjg@chromium.org>
+#
+# SPDX-License-Identifier: GPL-2.0+
+#
+# Entry-type module for U-Boot device tree
+#
+
+from entry import Entry
+from blob import Entry_blob
+
+class Entry_u_boot_dtb(Entry_blob):
+ def __init__(self, image, etype, node):
+ Entry_blob.__init__(self, image, etype, node)
+
+ def GetDefaultFilename(self):
+ return 'u-boot.dtb'
diff --git a/tools/binman/etype/u_boot_dtb_with_ucode.py b/tools/binman/etype/u_boot_dtb_with_ucode.py
new file mode 100644
index 0000000..fc02c67
--- /dev/null
+++ b/tools/binman/etype/u_boot_dtb_with_ucode.py
@@ -0,0 +1,78 @@
+# Copyright (c) 2016 Google, Inc
+## Written by Simon Glass <sjg@chromium.org>
+
+# SPDX-License-Identifier: GPL-2.0+
+#
+# Entry-type module for U-Boot device tree with the microcode removed
+#
+
+import fdt_select
+from entry import Entry
+from blob import Entry_blob
+import tools
+
+class Entry_u_boot_dtb_with_ucode(Entry_blob):
+ """A U-Boot device tree file, with the microcode removed
+
+ See Entry_u_boot_ucode for full details of the 3 entries involved in this
+ process.
+ """
+ def __init__(self, image, etype, node):
+ Entry_blob.__init__(self, image, etype, node)
+ self.ucode_data = ''
+ self.collate = False
+ self.ucode_offset = None
+ self.ucode_size = None
+
+ def GetDefaultFilename(self):
+ return 'u-boot.dtb'
+
+ def ObtainContents(self):
+ Entry_blob.ObtainContents(self)
+
+ # If the image does not need microcode, there is nothing to do
+ ucode_dest_entry = self.image.FindEntryType('u-boot-spl-with-ucode-ptr')
+ if not ucode_dest_entry or not ucode_dest_entry.target_pos:
+ ucode_dest_entry = self.image.FindEntryType('u-boot-with-ucode-ptr')
+ if not ucode_dest_entry or not ucode_dest_entry.target_pos:
+ return True
+
+ # Create a new file to hold the copied device tree
+ dtb_name = 'u-boot-dtb-with-ucode.dtb'
+ fname = tools.GetOutputFilename(dtb_name)
+ with open(fname, 'wb') as fd:
+ fd.write(self.data)
+
+ # Remove the microcode
+ fdt = fdt_select.FdtScan(fname)
+ fdt.Scan()
+ ucode = fdt.GetNode('/microcode')
+ if not ucode:
+ raise self.Raise("No /microcode node found in '%s'" % fname)
+
+ # There's no need to collate it (move all microcode into one place)
+ # if we only have one chunk of microcode.
+ self.collate = len(ucode.subnodes) > 1
+ for node in ucode.subnodes:
+ data_prop = node.props.get('data')
+ if data_prop:
+ self.ucode_data += ''.join(data_prop.bytes)
+ if not self.collate:
+ poffset = data_prop.GetOffset()
+ if poffset is None:
+ # We cannot obtain a property offset. Collate instead.
+ self.collate = True
+ else:
+ # Find the offset in the device tree of the ucode data
+ self.ucode_offset = poffset + 12
+ self.ucode_size = len(data_prop.bytes)
+ if self.collate:
+ prop = node.DeleteProp('data')
+ if self.collate:
+ fdt.Pack()
+ fdt.Flush()
+
+ # Make this file the contents of this entry
+ self._pathname = fname
+ self.ReadContents()
+ return True
diff --git a/tools/binman/etype/u_boot_img.py b/tools/binman/etype/u_boot_img.py
new file mode 100644
index 0000000..744f1b4
--- /dev/null
+++ b/tools/binman/etype/u_boot_img.py
@@ -0,0 +1,17 @@
+# Copyright (c) 2016 Google, Inc
+# Written by Simon Glass <sjg@chromium.org>
+#
+# SPDX-License-Identifier: GPL-2.0+
+#
+# Entry-type module for U-Boot binary
+#
+
+from entry import Entry
+from blob import Entry_blob
+
+class Entry_u_boot_img(Entry_blob):
+ def __init__(self, image, etype, node):
+ Entry_blob.__init__(self, image, etype, node)
+
+ def GetDefaultFilename(self):
+ return 'u-boot.img'
diff --git a/tools/binman/etype/u_boot_nodtb.py b/tools/binman/etype/u_boot_nodtb.py
new file mode 100644
index 0000000..3721c3b
--- /dev/null
+++ b/tools/binman/etype/u_boot_nodtb.py
@@ -0,0 +1,17 @@
+# Copyright (c) 2016 Google, Inc
+# Written by Simon Glass <sjg@chromium.org>
+#
+# SPDX-License-Identifier: GPL-2.0+
+#
+# Entry-type module for 'u-boot-nodtb.bin'
+#
+
+from entry import Entry
+from blob import Entry_blob
+
+class Entry_u_boot_nodtb(Entry_blob):
+ def __init__(self, image, etype, node):
+ Entry_blob.__init__(self, image, etype, node)
+
+ def GetDefaultFilename(self):
+ return 'u-boot-nodtb.bin'
diff --git a/tools/binman/etype/u_boot_spl.py b/tools/binman/etype/u_boot_spl.py
new file mode 100644
index 0000000..68b0148
--- /dev/null
+++ b/tools/binman/etype/u_boot_spl.py
@@ -0,0 +1,17 @@
+# Copyright (c) 2016 Google, Inc
+# Written by Simon Glass <sjg@chromium.org>
+#
+# SPDX-License-Identifier: GPL-2.0+
+#
+# Entry-type module for spl/u-boot-spl.bin
+#
+
+from entry import Entry
+from blob import Entry_blob
+
+class Entry_u_boot_spl(Entry_blob):
+ def __init__(self, image, etype, node):
+ Entry_blob.__init__(self, image, etype, node)
+
+ def GetDefaultFilename(self):
+ return 'spl/u-boot-spl.bin'
diff --git a/tools/binman/etype/u_boot_spl_bss_pad.py b/tools/binman/etype/u_boot_spl_bss_pad.py
new file mode 100644
index 0000000..c005f28
--- /dev/null
+++ b/tools/binman/etype/u_boot_spl_bss_pad.py
@@ -0,0 +1,26 @@
+# Copyright (c) 2016 Google, Inc
+# Written by Simon Glass <sjg@chromium.org>
+#
+# SPDX-License-Identifier: GPL-2.0+
+#
+# Entry-type module for BSS padding for spl/u-boot-spl.bin. This padding
+# can be added after the SPL binary to ensure that anything concatenated
+# to it will appear to SPL to be at the end of BSS rather than the start.
+#
+
+import command
+from entry import Entry
+from blob import Entry_blob
+import tools
+
+class Entry_u_boot_spl_bss_pad(Entry_blob):
+ def __init__(self, image, etype, node):
+ Entry_blob.__init__(self, image, etype, node)
+
+ def ObtainContents(self):
+ fname = tools.GetInputFilename('spl/u-boot-spl')
+ args = [['nm', fname], ['grep', '__bss_size']]
+ out = command.RunPipe(args, capture=True).stdout.splitlines()
+ bss_size = int(out[0].split()[0], 16)
+ self.data = chr(0) * bss_size
+ self.contents_size = bss_size
diff --git a/tools/binman/etype/u_boot_spl_with_ucode_ptr.py b/tools/binman/etype/u_boot_spl_with_ucode_ptr.py
new file mode 100644
index 0000000..764c282
--- /dev/null
+++ b/tools/binman/etype/u_boot_spl_with_ucode_ptr.py
@@ -0,0 +1,28 @@
+# Copyright (c) 2016 Google, Inc
+# Written by Simon Glass <sjg@chromium.org>
+#
+# SPDX-License-Identifier: GPL-2.0+
+#
+# Entry-type module for an SPL binary with an embedded microcode pointer
+#
+
+import struct
+
+import command
+from entry import Entry
+from blob import Entry_blob
+from u_boot_with_ucode_ptr import Entry_u_boot_with_ucode_ptr
+import tools
+
+class Entry_u_boot_spl_with_ucode_ptr(Entry_u_boot_with_ucode_ptr):
+ """U-Boot SPL with embedded microcode pointer
+
+ See Entry_u_boot_ucode for full details of the entries involved in this
+ process.
+ """
+ def __init__(self, image, etype, node):
+ Entry_blob.__init__(self, image, etype, node)
+ self.elf_fname = 'spl/u-boot-spl'
+
+ def GetDefaultFilename(self):
+ return 'spl/u-boot-spl.bin'
diff --git a/tools/binman/etype/u_boot_ucode.py b/tools/binman/etype/u_boot_ucode.py
new file mode 100644
index 0000000..8fe27ac
--- /dev/null
+++ b/tools/binman/etype/u_boot_ucode.py
@@ -0,0 +1,84 @@
+# Copyright (c) 2016 Google, Inc
+# Written by Simon Glass <sjg@chromium.org>
+#
+# SPDX-License-Identifier: GPL-2.0+
+#
+# Entry-type module for a U-Boot binary with an embedded microcode pointer
+#
+
+from entry import Entry
+from blob import Entry_blob
+import tools
+
+class Entry_u_boot_ucode(Entry_blob):
+ """U-Boot microcode block
+
+ U-Boot on x86 needs a single block of microcode. This is collected from
+ the various microcode update nodes in the device tree. It is also unable
+ to read the microcode from the device tree on platforms that use FSP
+ (Firmware Support Package) binaries, because the API requires that the
+ microcode is supplied before there is any SRAM available to use (i.e.
+ the FSP sets up the SRAM / cache-as-RAM but does so in the call that
+ requires the microcode!). To keep things simple, all x86 platforms handle
+ microcode the same way in U-Boot (even non-FSP platforms). This is that
+ a table is placed at _dt_ucode_base_size containing the base address and
+ size of the microcode. This is either passed to the FSP (for FSP
+ platforms), or used to set up the microcode (for non-FSP platforms).
+ This all happens in the build system since it is the only way to get
+ the microcode into a single blob and accessible without SRAM.
+
+ There are two cases to handle. If there is only one microcode blob in
+ the device tree, then the ucode pointer it set to point to that. This
+ entry (u-boot-ucode) is empty. If there is more than one update, then
+ this entry holds the concatenation of all updates, and the device tree
+ entry (u-boot-dtb-with-ucode) is updated to remove the microcode. This
+ last step ensures that that the microcode appears in one contiguous
+ block in the image and is not unnecessarily duplicated in the device
+ tree. It is referred to as 'collation' here.
+
+ Entry types that have a part to play in handling microcode:
+
+ Entry_u_boot_with_ucode_ptr:
+ Contains u-boot-nodtb.bin (i.e. U-Boot without the device tree).
+ It updates it with the address and size of the microcode so that
+ U-Boot can find it early on start-up.
+ Entry_u_boot_dtb_with_ucode:
+ Contains u-boot.dtb. It stores the microcode in a
+ 'self.ucode_data' property, which is then read by this class to
+ obtain the microcode if needed. If collation is performed, it
+ removes the microcode from the device tree.
+ Entry_u_boot_ucode:
+ This class. If collation is enabled it reads the microcode from
+ the Entry_u_boot_dtb_with_ucode entry, and uses it as the
+ contents of this entry.
+ """
+ def __init__(self, image, etype, node):
+ Entry_blob.__init__(self, image, etype, node)
+
+ def ObtainContents(self):
+ # If the image does not need microcode, there is nothing to do
+ ucode_dest_entry = self.image.FindEntryType('u-boot-with-ucode-ptr')
+ if ucode_dest_entry and not ucode_dest_entry.target_pos:
+ self.data = ''
+ return True
+
+ # Get the microcode from the device tree entry
+ fdt_entry = self.image.FindEntryType('u-boot-dtb-with-ucode')
+ if not fdt_entry or not fdt_entry.ucode_data:
+ return False
+
+ if not fdt_entry.collate:
+ # This section can be empty
+ self.data = ''
+ return True
+
+ # Write it out to a file
+ dtb_name = 'u-boot-ucode.bin'
+ fname = tools.GetOutputFilename(dtb_name)
+ with open(fname, 'wb') as fd:
+ fd.write(fdt_entry.ucode_data)
+
+ self._pathname = fname
+ self.ReadContents()
+
+ return True
diff --git a/tools/binman/etype/u_boot_with_ucode_ptr.py b/tools/binman/etype/u_boot_with_ucode_ptr.py
new file mode 100644
index 0000000..6f01adb
--- /dev/null
+++ b/tools/binman/etype/u_boot_with_ucode_ptr.py
@@ -0,0 +1,87 @@
+# Copyright (c) 2016 Google, Inc
+# Written by Simon Glass <sjg@chromium.org>
+#
+# SPDX-License-Identifier: GPL-2.0+
+#
+# Entry-type module for a U-Boot binary with an embedded microcode pointer
+#
+
+import struct
+
+import command
+from entry import Entry
+from blob import Entry_blob
+import fdt_util
+import tools
+
+class Entry_u_boot_with_ucode_ptr(Entry_blob):
+ """U-Boot with embedded microcode pointer
+
+ See Entry_u_boot_ucode for full details of the 3 entries involved in this
+ process.
+ """
+ def __init__(self, image, etype, node):
+ Entry_blob.__init__(self, image, etype, node)
+ self.elf_fname = 'u-boot'
+ self.target_pos = None
+
+ def GetDefaultFilename(self):
+ return 'u-boot-nodtb.bin'
+
+ def ObtainContents(self):
+ # Figure out where to put the microcode pointer
+ fname = tools.GetInputFilename(self.elf_fname)
+ args = [['nm', fname], ['grep', '-w', '_dt_ucode_base_size']]
+ out = (command.RunPipe(args, capture=True, raise_on_error=False).
+ stdout.splitlines())
+ if len(out) == 1:
+ self.target_pos = int(out[0].split()[0], 16)
+ elif not fdt_util.GetBool(self._node, 'optional-ucode'):
+ self.Raise('Cannot locate _dt_ucode_base_size symbol in u-boot')
+
+ return Entry_blob.ObtainContents(self)
+
+ def ProcessContents(self):
+ # If the image does not need microcode, there is nothing to do
+ if not self.target_pos:
+ return
+
+ # Get the position of the microcode
+ ucode_entry = self.image.FindEntryType('u-boot-ucode')
+ if not ucode_entry:
+ self.Raise('Cannot find microcode region u-boot-ucode')
+
+ # Check the target pos is in the image. If it is not, then U-Boot is
+ # being linked incorrectly, or is being placed at the wrong position
+ # in the image.
+ #
+ # The image must be set up so that U-Boot is placed at the
+ # flash address to which it is linked. For example, if
+ # CONFIG_SYS_TEXT_BASE is 0xfff00000, and the ROM is 8MB, then
+ # the U-Boot region must start at position 7MB in the image. In this
+ # case the ROM starts at 0xff800000, so the position of the first
+ # entry in the image corresponds to that.
+ if (self.target_pos < self.pos or
+ self.target_pos >= self.pos + self.size):
+ self.Raise('Microcode pointer _dt_ucode_base_size at %08x is '
+ 'outside the image ranging from %08x to %08x' %
+ (self.target_pos, self.pos, self.pos + self.size))
+
+ # Get the microcode, either from u-boot-ucode or u-boot-dtb-with-ucode.
+ # If we have left the microcode in the device tree, then it will be
+ # in the former. If we extracted the microcode from the device tree
+ # and collated it in one place, it will be in the latter.
+ if ucode_entry.size:
+ pos, size = ucode_entry.pos, ucode_entry.size
+ else:
+ dtb_entry = self.image.FindEntryType('u-boot-dtb-with-ucode')
+ if not dtb_entry:
+ self.Raise('Cannot find microcode region u-boot-dtb-with-ucode')
+ pos = dtb_entry.pos + dtb_entry.ucode_offset
+ size = dtb_entry.ucode_size
+
+ # Write the microcode position and size into the entry
+ pos_and_size = struct.pack('<2L', pos, size)
+ self.target_pos -= self.pos
+ self.data = (self.data[:self.target_pos] + pos_and_size +
+ self.data[self.target_pos + 8:])
diff --git a/tools/binman/etype/x86_start16.py b/tools/binman/etype/x86_start16.py
new file mode 100644
index 0000000..a44ea68
--- /dev/null
+++ b/tools/binman/etype/x86_start16.py
@@ -0,0 +1,17 @@
+# Copyright (c) 2016 Google, Inc
+# Written by Simon Glass <sjg@chromium.org>
+#
+# SPDX-License-Identifier: GPL-2.0+
+#
+# Entry-type module for the 16-bit x86 start-up code for U-Boot
+#
+
+from entry import Entry
+from blob import Entry_blob
+
+class Entry_x86_start16(Entry_blob):
+ def __init__(self, image, etype, node):
+ Entry_blob.__init__(self, image, etype, node)
+
+ def GetDefaultFilename(self):
+ return 'u-boot-x86-16bit.bin'
diff --git a/tools/binman/etype/x86_start16_spl.py b/tools/binman/etype/x86_start16_spl.py
new file mode 100644
index 0000000..3679a43
--- /dev/null
+++ b/tools/binman/etype/x86_start16_spl.py
@@ -0,0 +1,17 @@
+# Copyright (c) 2016 Google, Inc
+# Written by Simon Glass <sjg@chromium.org>
+#
+# SPDX-License-Identifier: GPL-2.0+
+#
+# Entry-type module for the 16-bit x86 start-up code for U-Boot SPL
+#
+
+from entry import Entry
+from blob import Entry_blob
+
+class Entry_x86_start16_spl(Entry_blob):
+ def __init__(self, image, etype, node):
+ Entry_blob.__init__(self, image, etype, node)
+
+ def GetDefaultFilename(self):
+ return 'spl/u-boot-x86-16bit-spl.bin'
diff --git a/tools/binman/fdt_test.py b/tools/binman/fdt_test.py
new file mode 100644
index 0000000..1d9494e
--- /dev/null
+++ b/tools/binman/fdt_test.py
@@ -0,0 +1,48 @@
+#
+# Copyright (c) 2016 Google, Inc
+# Written by Simon Glass <sjg@chromium.org>
+#
+# SPDX-License-Identifier: GPL-2.0+
+#
+# Test for the fdt modules
+
+import os
+import sys
+import tempfile
+import unittest
+
+from fdt_select import FdtScan
+import fdt_util
+import tools
+
+class TestFdt(unittest.TestCase):
+ @classmethod
+ def setUpClass(self):
+ self._binman_dir = os.path.dirname(os.path.realpath(sys.argv[0]))
+ self._indir = tempfile.mkdtemp(prefix='binmant.')
+ tools.PrepareOutputDir(self._indir, True)
+
+ def TestFile(self, fname):
+ return os.path.join(self._binman_dir, 'test', fname)
+
+ def GetCompiled(self, fname):
+ return fdt_util.EnsureCompiled(self.TestFile(fname))
+
+ def _DeleteProp(self, fdt):
+ node = fdt.GetNode('/microcode/update@0')
+ node.DeleteProp('data')
+
+ def testFdtNormal(self):
+ fname = self.GetCompiled('34_x86_ucode.dts')
+ fdt = FdtScan(fname)
+ self._DeleteProp(fdt)
+
+ def testFdtFallback(self):
+ fname = self.GetCompiled('34_x86_ucode.dts')
+ fdt = FdtScan(fname, True)
+ fdt.GetProp('/microcode/update@0', 'data')
+ self.assertEqual('fred',
+ fdt.GetProp('/microcode/update@0', 'none', default='fred'))
+ self.assertEqual('12345678 12345679',
+ fdt.GetProp('/microcode/update@0', 'data', typespec='x'))
+ self._DeleteProp(fdt)
diff --git a/tools/binman/func_test.py b/tools/binman/func_test.py
new file mode 100644
index 0000000..740fa9e
--- /dev/null
+++ b/tools/binman/func_test.py
@@ -0,0 +1,822 @@
+#
+# Copyright (c) 2016 Google, Inc
+# Written by Simon Glass <sjg@chromium.org>
+#
+# SPDX-License-Identifier: GPL-2.0+
+#
+# To run a single test, change to this directory, and:
+#
+# python -m unittest func_test.TestFunctional.testHelp
+
+from optparse import OptionParser
+import os
+import shutil
+import struct
+import sys
+import tempfile
+import unittest
+
+import binman
+import cmdline
+import command
+import control
+import entry
+import fdt_select
+import fdt_util
+import tools
+import tout
+
+# Contents of test files, corresponding to different entry types
+U_BOOT_DATA = '1234'
+U_BOOT_IMG_DATA = 'img'
+U_BOOT_SPL_DATA = '567'
+BLOB_DATA = '89'
+ME_DATA = '0abcd'
+VGA_DATA = 'vga'
+U_BOOT_DTB_DATA = 'udtb'
+X86_START16_DATA = 'start16'
+U_BOOT_NODTB_DATA = 'nodtb with microcode pointer somewhere in here'
+FSP_DATA = 'fsp'
+CMC_DATA = 'cmc'
+
+class TestFunctional(unittest.TestCase):
+ """Functional tests for binman
+
+ Most of these use a sample .dts file to build an image and then check
+ that it looks correct. The sample files are in the test/ subdirectory
+ and are numbered.
+
+ For each entry type a very small test file is created using fixed
+ string contents. This makes it easy to test that things look right, and
+ debug problems.
+
+ In some cases a 'real' file must be used - these are also supplied in
+ the test/ diurectory.
+ """
+ @classmethod
+ def setUpClass(self):
+ # Handle the case where argv[0] is 'python'
+ self._binman_dir = os.path.dirname(os.path.realpath(sys.argv[0]))
+ self._binman_pathname = os.path.join(self._binman_dir, 'binman')
+
+ # Create a temporary directory for input files
+ self._indir = tempfile.mkdtemp(prefix='binmant.')
+
+ # Create some test files
+ TestFunctional._MakeInputFile('u-boot.bin', U_BOOT_DATA)
+ TestFunctional._MakeInputFile('u-boot.img', U_BOOT_IMG_DATA)
+ TestFunctional._MakeInputFile('spl/u-boot-spl.bin', U_BOOT_SPL_DATA)
+ TestFunctional._MakeInputFile('blobfile', BLOB_DATA)
+ TestFunctional._MakeInputFile('me.bin', ME_DATA)
+ TestFunctional._MakeInputFile('vga.bin', VGA_DATA)
+ TestFunctional._MakeInputFile('u-boot.dtb', U_BOOT_DTB_DATA)
+ TestFunctional._MakeInputFile('u-boot-x86-16bit.bin', X86_START16_DATA)
+ TestFunctional._MakeInputFile('u-boot-nodtb.bin', U_BOOT_NODTB_DATA)
+ TestFunctional._MakeInputFile('fsp.bin', FSP_DATA)
+ TestFunctional._MakeInputFile('cmc.bin', CMC_DATA)
+ self._output_setup = False
+
+ # ELF file with a '_dt_ucode_base_size' symbol
+ with open(self.TestFile('u_boot_ucode_ptr')) as fd:
+ TestFunctional._MakeInputFile('u-boot', fd.read())
+
+ # Intel flash descriptor file
+ with open(self.TestFile('descriptor.bin')) as fd:
+ TestFunctional._MakeInputFile('descriptor.bin', fd.read())
+
+ @classmethod
+ def tearDownClass(self):
+ """Remove the temporary input directory and its contents"""
+ if self._indir:
+ shutil.rmtree(self._indir)
+ self._indir = None
+
+ def setUp(self):
+ # Enable this to turn on debugging output
+ # tout.Init(tout.DEBUG)
+ command.test_result = None
+
+ def tearDown(self):
+ """Remove the temporary output directory"""
+ tools._FinaliseForTest()
+
+ def _RunBinman(self, *args, **kwargs):
+ """Run binman using the command line
+
+ Args:
+ Arguments to pass, as a list of strings
+ kwargs: Arguments to pass to Command.RunPipe()
+ """
+ result = command.RunPipe([[self._binman_pathname] + list(args)],
+ capture=True, capture_stderr=True, raise_on_error=False)
+ if result.return_code and kwargs.get('raise_on_error', True):
+ raise Exception("Error running '%s': %s" % (' '.join(args),
+ result.stdout + result.stderr))
+ return result
+
+ def _DoBinman(self, *args):
+ """Run binman using directly (in the same process)
+
+ Args:
+ Arguments to pass, as a list of strings
+ Returns:
+ Return value (0 for success)
+ """
+ (options, args) = cmdline.ParseArgs(list(args))
+ options.pager = 'binman-invalid-pager'
+ options.build_dir = self._indir
+
+ # For testing, you can force an increase in verbosity here
+ # options.verbosity = tout.DEBUG
+ return control.Binman(options, args)
+
+ def _DoTestFile(self, fname):
+ """Run binman with a given test file
+
+ Args:
+ fname: Device tree source filename to use (e.g. 05_simple.dts)
+ """
+ return self._DoBinman('-p', '-I', self._indir,
+ '-d', self.TestFile(fname))
+
+ def _SetupDtb(self, fname, outfile='u-boot.dtb'):
+ """Set up a new test device-tree file
+
+ The given file is compiled and set up as the device tree to be used
+ for ths test.
+
+ Args:
+ fname: Filename of .dts file to read
+ outfile: Output filename for compiled device tree binary
+
+ Returns:
+ Contents of device tree binary
+ """
+ if not self._output_setup:
+ tools.PrepareOutputDir(self._indir, True)
+ self._output_setup = True
+ dtb = fdt_util.EnsureCompiled(self.TestFile(fname))
+ with open(dtb) as fd:
+ data = fd.read()
+ TestFunctional._MakeInputFile(outfile, data)
+ return data
+
+ def _DoReadFileDtb(self, fname, use_real_dtb=False):
+ """Run binman and return the resulting image
+
+ This runs binman with a given test file and then reads the resulting
+ output file. It is a shortcut function since most tests need to do
+ these steps.
+
+ Raises an assertion failure if binman returns a non-zero exit code.
+
+ Args:
+ fname: Device tree source filename to use (e.g. 05_simple.dts)
+ use_real_dtb: True to use the test file as the contents of
+ the u-boot-dtb entry. Normally this is not needed and the
+ test contents (the U_BOOT_DTB_DATA string) can be used.
+ But in some test we need the real contents.
+
+ Returns:
+ Tuple:
+ Resulting image contents
+ Device tree contents
+ """
+ dtb_data = None
+ # Use the compiled test file as the u-boot-dtb input
+ if use_real_dtb:
+ dtb_data = self._SetupDtb(fname)
+
+ try:
+ retcode = self._DoTestFile(fname)
+ self.assertEqual(0, retcode)
+
+ # Find the (only) image, read it and return its contents
+ image = control.images['image']
+ fname = tools.GetOutputFilename('image.bin')
+ self.assertTrue(os.path.exists(fname))
+ with open(fname) as fd:
+ return fd.read(), dtb_data
+ finally:
+ # Put the test file back
+ if use_real_dtb:
+ TestFunctional._MakeInputFile('u-boot.dtb', U_BOOT_DTB_DATA)
+
+ def _DoReadFile(self, fname, use_real_dtb=False):
+ """Helper function which discards the device-tree binary"""
+ return self._DoReadFileDtb(fname, use_real_dtb)[0]
+
+ @classmethod
+ def _MakeInputFile(self, fname, contents):
+ """Create a new test input file, creating directories as needed
+
+ Args:
+ fname: Filenaem to create
+ contents: File contents to write in to the file
+ Returns:
+ Full pathname of file created
+ """
+ pathname = os.path.join(self._indir, fname)
+ dirname = os.path.dirname(pathname)
+ if dirname and not os.path.exists(dirname):
+ os.makedirs(dirname)
+ with open(pathname, 'wb') as fd:
+ fd.write(contents)
+ return pathname
+
+ @classmethod
+ def TestFile(self, fname):
+ return os.path.join(self._binman_dir, 'test', fname)
+
+ def AssertInList(self, grep_list, target):
+ """Assert that at least one of a list of things is in a target
+
+ Args:
+ grep_list: List of strings to check
+ target: Target string
+ """
+ for grep in grep_list:
+ if grep in target:
+ return
+ self.fail("Error: '%' not found in '%s'" % (grep_list, target))
+
+ def CheckNoGaps(self, entries):
+ """Check that all entries fit together without gaps
+
+ Args:
+ entries: List of entries to check
+ """
+ pos = 0
+ for entry in entries.values():
+ self.assertEqual(pos, entry.pos)
+ pos += entry.size
+
+ def GetFdtLen(self, dtb):
+ """Get the totalsize field from a device tree binary
+
+ Args:
+ dtb: Device tree binary contents
+
+ Returns:
+ Total size of device tree binary, from the header
+ """
+ return struct.unpack('>L', dtb[4:8])[0]
+
+ def testRun(self):
+ """Test a basic run with valid args"""
+ result = self._RunBinman('-h')
+
+ def testFullHelp(self):
+ """Test that the full help is displayed with -H"""
+ result = self._RunBinman('-H')
+ help_file = os.path.join(self._binman_dir, 'README')
+ self.assertEqual(len(result.stdout), os.path.getsize(help_file))
+ self.assertEqual(0, len(result.stderr))
+ self.assertEqual(0, result.return_code)
+
+ def testFullHelpInternal(self):
+ """Test that the full help is displayed with -H"""
+ try:
+ command.test_result = command.CommandResult()
+ result = self._DoBinman('-H')
+ help_file = os.path.join(self._binman_dir, 'README')
+ finally:
+ command.test_result = None
+
+ def testHelp(self):
+ """Test that the basic help is displayed with -h"""
+ result = self._RunBinman('-h')
+ self.assertTrue(len(result.stdout) > 200)
+ self.assertEqual(0, len(result.stderr))
+ self.assertEqual(0, result.return_code)
+
+ # Not yet available.
+ def testBoard(self):
+ """Test that we can run it with a specific board"""
+ self._SetupDtb('05_simple.dts', 'sandbox/u-boot.dtb')
+ TestFunctional._MakeInputFile('sandbox/u-boot.bin', U_BOOT_DATA)
+ result = self._DoBinman('-b', 'sandbox')
+ self.assertEqual(0, result)
+
+ def testNeedBoard(self):
+ """Test that we get an error when no board ius supplied"""
+ with self.assertRaises(ValueError) as e:
+ result = self._DoBinman()
+ self.assertIn("Must provide a board to process (use -b <board>)",
+ str(e.exception))
+
+ def testMissingDt(self):
+ """Test that an invalid device tree file generates an error"""
+ with self.assertRaises(Exception) as e:
+ self._RunBinman('-d', 'missing_file')
+ # We get one error from libfdt, and a different one from fdtget.
+ self.AssertInList(["Couldn't open blob from 'missing_file'",
+ 'No such file or directory'], str(e.exception))
+
+ def testBrokenDt(self):
+ """Test that an invalid device tree source file generates an error
+
+ Since this is a source file it should be compiled and the error
+ will come from the device-tree compiler (dtc).
+ """
+ with self.assertRaises(Exception) as e:
+ self._RunBinman('-d', self.TestFile('01_invalid.dts'))
+ self.assertIn("FATAL ERROR: Unable to parse input tree",
+ str(e.exception))
+
+ def testMissingNode(self):
+ """Test that a device tree without a 'binman' node generates an error"""
+ with self.assertRaises(Exception) as e:
+ self._DoBinman('-d', self.TestFile('02_missing_node.dts'))
+ self.assertIn("does not have a 'binman' node", str(e.exception))
+
+ def testEmpty(self):
+ """Test that an empty binman node works OK (i.e. does nothing)"""
+ result = self._RunBinman('-d', self.TestFile('03_empty.dts'))
+ self.assertEqual(0, len(result.stderr))
+ self.assertEqual(0, result.return_code)
+
+ def testInvalidEntry(self):
+ """Test that an invalid entry is flagged"""
+ with self.assertRaises(Exception) as e:
+ result = self._RunBinman('-d',
+ self.TestFile('04_invalid_entry.dts'))
+ #print e.exception
+ self.assertIn("Unknown entry type 'not-a-valid-type' in node "
+ "'/binman/not-a-valid-type'", str(e.exception))
+
+ def testSimple(self):
+ """Test a simple binman with a single file"""
+ data = self._DoReadFile('05_simple.dts')
+ self.assertEqual(U_BOOT_DATA, data)
+
+ def testDual(self):
+ """Test that we can handle creating two images
+
+ This also tests image padding.
+ """
+ retcode = self._DoTestFile('06_dual_image.dts')
+ self.assertEqual(0, retcode)
+
+ image = control.images['image1']
+ self.assertEqual(len(U_BOOT_DATA), image._size)
+ fname = tools.GetOutputFilename('image1.bin')
+ self.assertTrue(os.path.exists(fname))
+ with open(fname) as fd:
+ data = fd.read()
+ self.assertEqual(U_BOOT_DATA, data)
+
+ image = control.images['image2']
+ self.assertEqual(3 + len(U_BOOT_DATA) + 5, image._size)
+ fname = tools.GetOutputFilename('image2.bin')
+ self.assertTrue(os.path.exists(fname))
+ with open(fname) as fd:
+ data = fd.read()
+ self.assertEqual(U_BOOT_DATA, data[3:7])
+ self.assertEqual(chr(0) * 3, data[:3])
+ self.assertEqual(chr(0) * 5, data[7:])
+
+ def testBadAlign(self):
+ """Test that an invalid alignment value is detected"""
+ with self.assertRaises(ValueError) as e:
+ self._DoTestFile('07_bad_align.dts')
+ self.assertIn("Node '/binman/u-boot': Alignment 23 must be a power "
+ "of two", str(e.exception))
+
+ def testPackSimple(self):
+ """Test that packing works as expected"""
+ retcode = self._DoTestFile('08_pack.dts')
+ self.assertEqual(0, retcode)
+ self.assertIn('image', control.images)
+ image = control.images['image']
+ entries = image._entries
+ self.assertEqual(5, len(entries))
+
+ # First u-boot
+ self.assertIn('u-boot', entries)
+ entry = entries['u-boot']
+ self.assertEqual(0, entry.pos)
+ self.assertEqual(len(U_BOOT_DATA), entry.size)
+
+ # Second u-boot, aligned to 16-byte boundary
+ self.assertIn('u-boot-align', entries)
+ entry = entries['u-boot-align']
+ self.assertEqual(16, entry.pos)
+ self.assertEqual(len(U_BOOT_DATA), entry.size)
+
+ # Third u-boot, size 23 bytes
+ self.assertIn('u-boot-size', entries)
+ entry = entries['u-boot-size']
+ self.assertEqual(20, entry.pos)
+ self.assertEqual(len(U_BOOT_DATA), entry.contents_size)
+ self.assertEqual(23, entry.size)
+
+ # Fourth u-boot, placed immediate after the above
+ self.assertIn('u-boot-next', entries)
+ entry = entries['u-boot-next']
+ self.assertEqual(43, entry.pos)
+ self.assertEqual(len(U_BOOT_DATA), entry.size)
+
+ # Fifth u-boot, placed at a fixed position
+ self.assertIn('u-boot-fixed', entries)
+ entry = entries['u-boot-fixed']
+ self.assertEqual(61, entry.pos)
+ self.assertEqual(len(U_BOOT_DATA), entry.size)
+
+ self.assertEqual(65, image._size)
+
+ def testPackExtra(self):
+ """Test that extra packing feature works as expected"""
+ retcode = self._DoTestFile('09_pack_extra.dts')
+
+ self.assertEqual(0, retcode)
+ self.assertIn('image', control.images)
+ image = control.images['image']
+ entries = image._entries
+ self.assertEqual(5, len(entries))
+
+ # First u-boot with padding before and after
+ self.assertIn('u-boot', entries)
+ entry = entries['u-boot']
+ self.assertEqual(0, entry.pos)
+ self.assertEqual(3, entry.pad_before)
+ self.assertEqual(3 + 5 + len(U_BOOT_DATA), entry.size)
+
+ # Second u-boot has an aligned size, but it has no effect
+ self.assertIn('u-boot-align-size-nop', entries)
+ entry = entries['u-boot-align-size-nop']
+ self.assertEqual(12, entry.pos)
+ self.assertEqual(4, entry.size)
+
+ # Third u-boot has an aligned size too
+ self.assertIn('u-boot-align-size', entries)
+ entry = entries['u-boot-align-size']
+ self.assertEqual(16, entry.pos)
+ self.assertEqual(32, entry.size)
+
+ # Fourth u-boot has an aligned end
+ self.assertIn('u-boot-align-end', entries)
+ entry = entries['u-boot-align-end']
+ self.assertEqual(48, entry.pos)
+ self.assertEqual(16, entry.size)
+
+ # Fifth u-boot immediately afterwards
+ self.assertIn('u-boot-align-both', entries)
+ entry = entries['u-boot-align-both']
+ self.assertEqual(64, entry.pos)
+ self.assertEqual(64, entry.size)
+
+ self.CheckNoGaps(entries)
+ self.assertEqual(128, image._size)
+
+ def testPackAlignPowerOf2(self):
+ """Test that invalid entry alignment is detected"""
+ with self.assertRaises(ValueError) as e:
+ self._DoTestFile('10_pack_align_power2.dts')
+ self.assertIn("Node '/binman/u-boot': Alignment 5 must be a power "
+ "of two", str(e.exception))
+
+ def testPackAlignSizePowerOf2(self):
+ """Test that invalid entry size alignment is detected"""
+ with self.assertRaises(ValueError) as e:
+ self._DoTestFile('11_pack_align_size_power2.dts')
+ self.assertIn("Node '/binman/u-boot': Alignment size 55 must be a "
+ "power of two", str(e.exception))
+
+ def testPackInvalidAlign(self):
+ """Test detection of an position that does not match its alignment"""
+ with self.assertRaises(ValueError) as e:
+ self._DoTestFile('12_pack_inv_align.dts')
+ self.assertIn("Node '/binman/u-boot': Position 0x5 (5) does not match "
+ "align 0x4 (4)", str(e.exception))
+
+ def testPackInvalidSizeAlign(self):
+ """Test that invalid entry size alignment is detected"""
+ with self.assertRaises(ValueError) as e:
+ self._DoTestFile('13_pack_inv_size_align.dts')
+ self.assertIn("Node '/binman/u-boot': Size 0x5 (5) does not match "
+ "align-size 0x4 (4)", str(e.exception))
+
+ def testPackOverlap(self):
+ """Test that overlapping regions are detected"""
+ with self.assertRaises(ValueError) as e:
+ self._DoTestFile('14_pack_overlap.dts')
+ self.assertIn("Node '/binman/u-boot-align': Position 0x3 (3) overlaps "
+ "with previous entry '/binman/u-boot' ending at 0x4 (4)",
+ str(e.exception))
+
+ def testPackEntryOverflow(self):
+ """Test that entries that overflow their size are detected"""
+ with self.assertRaises(ValueError) as e:
+ self._DoTestFile('15_pack_overflow.dts')
+ self.assertIn("Node '/binman/u-boot': Entry contents size is 0x4 (4) "
+ "but entry size is 0x3 (3)", str(e.exception))
+
+ def testPackImageOverflow(self):
+ """Test that entries which overflow the image size are detected"""
+ with self.assertRaises(ValueError) as e:
+ self._DoTestFile('16_pack_image_overflow.dts')
+ self.assertIn("Image '/binman': contents size 0x4 (4) exceeds image "
+ "size 0x3 (3)", str(e.exception))
+
+ def testPackImageSize(self):
+ """Test that the image size can be set"""
+ retcode = self._DoTestFile('17_pack_image_size.dts')
+ self.assertEqual(0, retcode)
+ self.assertIn('image', control.images)
+ image = control.images['image']
+ self.assertEqual(7, image._size)
+
+ def testPackImageSizeAlign(self):
+ """Test that image size alignemnt works as expected"""
+ retcode = self._DoTestFile('18_pack_image_align.dts')
+ self.assertEqual(0, retcode)
+ self.assertIn('image', control.images)
+ image = control.images['image']
+ self.assertEqual(16, image._size)
+
+ def testPackInvalidImageAlign(self):
+ """Test that invalid image alignment is detected"""
+ with self.assertRaises(ValueError) as e:
+ self._DoTestFile('19_pack_inv_image_align.dts')
+ self.assertIn("Image '/binman': Size 0x7 (7) does not match "
+ "align-size 0x8 (8)", str(e.exception))
+
+ def testPackAlignPowerOf2(self):
+ """Test that invalid image alignment is detected"""
+ with self.assertRaises(ValueError) as e:
+ self._DoTestFile('20_pack_inv_image_align_power2.dts')
+ self.assertIn("Image '/binman': Alignment size 131 must be a power of "
+ "two", str(e.exception))
+
+ def testImagePadByte(self):
+ """Test that the image pad byte can be specified"""
+ data = self._DoReadFile('21_image_pad.dts')
+ self.assertEqual(U_BOOT_SPL_DATA + (chr(0xff) * 9) + U_BOOT_DATA, data)
+
+ def testImageName(self):
+ """Test that image files can be named"""
+ retcode = self._DoTestFile('22_image_name.dts')
+ self.assertEqual(0, retcode)
+ image = control.images['image1']
+ fname = tools.GetOutputFilename('test-name')
+ self.assertTrue(os.path.exists(fname))
+
+ image = control.images['image2']
+ fname = tools.GetOutputFilename('test-name.xx')
+ self.assertTrue(os.path.exists(fname))
+
+ def testBlobFilename(self):
+ """Test that generic blobs can be provided by filename"""
+ data = self._DoReadFile('23_blob.dts')
+ self.assertEqual(BLOB_DATA, data)
+
+ def testPackSorted(self):
+ """Test that entries can be sorted"""
+ data = self._DoReadFile('24_sorted.dts')
+ self.assertEqual(chr(0) * 5 + U_BOOT_SPL_DATA + chr(0) * 2 +
+ U_BOOT_DATA, data)
+
+ def testPackZeroPosition(self):
+ """Test that an entry at position 0 is not given a new position"""
+ with self.assertRaises(ValueError) as e:
+ self._DoTestFile('25_pack_zero_size.dts')
+ self.assertIn("Node '/binman/u-boot-spl': Position 0x0 (0) overlaps "
+ "with previous entry '/binman/u-boot' ending at 0x4 (4)",
+ str(e.exception))
+
+ def testPackUbootDtb(self):
+ """Test that a device tree can be added to U-Boot"""
+ data = self._DoReadFile('26_pack_u_boot_dtb.dts')
+ self.assertEqual(U_BOOT_NODTB_DATA + U_BOOT_DTB_DATA, data)
+
+ def testPackX86RomNoSize(self):
+ """Test that the end-at-4gb property requires a size property"""
+ with self.assertRaises(ValueError) as e:
+ self._DoTestFile('27_pack_4gb_no_size.dts')
+ self.assertIn("Image '/binman': Image size must be provided when "
+ "using end-at-4gb", str(e.exception))
+
+ def testPackX86RomOutside(self):
+ """Test that the end-at-4gb property checks for position boundaries"""
+ with self.assertRaises(ValueError) as e:
+ self._DoTestFile('28_pack_4gb_outside.dts')
+ self.assertIn("Node '/binman/u-boot': Position 0x0 (0) is outside "
+ "the image starting at 0xfffffff0 (4294967280)",
+ str(e.exception))
+
+ def testPackX86Rom(self):
+ """Test that a basic x86 ROM can be created"""
+ data = self._DoReadFile('29_x86-rom.dts')
+ self.assertEqual(U_BOOT_DATA + chr(0) * 3 + U_BOOT_SPL_DATA +
+ chr(0) * 6, data)
+
+ def testPackX86RomMeNoDesc(self):
+ """Test that an invalid Intel descriptor entry is detected"""
+ TestFunctional._MakeInputFile('descriptor.bin', '')
+ with self.assertRaises(ValueError) as e:
+ self._DoTestFile('31_x86-rom-me.dts')
+ self.assertIn("Node '/binman/intel-descriptor': Cannot find FD "
+ "signature", str(e.exception))
+
+ def testPackX86RomBadDesc(self):
+ """Test that the Intel requires a descriptor entry"""
+ with self.assertRaises(ValueError) as e:
+ self._DoTestFile('30_x86-rom-me-no-desc.dts')
+ self.assertIn("Node '/binman/intel-me': No position set with "
+ "pos-unset: should another entry provide this correct "
+ "position?", str(e.exception))
+
+ def testPackX86RomMe(self):
+ """Test that an x86 ROM with an ME region can be created"""
+ data = self._DoReadFile('31_x86-rom-me.dts')
+ self.assertEqual(ME_DATA, data[0x1000:0x1000 + len(ME_DATA)])
+
+ def testPackVga(self):
+ """Test that an image with a VGA binary can be created"""
+ data = self._DoReadFile('32_intel-vga.dts')
+ self.assertEqual(VGA_DATA, data[:len(VGA_DATA)])
+
+ def testPackStart16(self):
+ """Test that an image with an x86 start16 region can be created"""
+ data = self._DoReadFile('33_x86-start16.dts')
+ self.assertEqual(X86_START16_DATA, data[:len(X86_START16_DATA)])
+
+ def testPackUbootMicrocode(self):
+ """Test that x86 microcode can be handled correctly
+
+ We expect to see the following in the image, in order:
+ u-boot-nodtb.bin with a microcode pointer inserted at the correct
+ place
+ u-boot.dtb with the microcode removed
+ the microcode
+ """
+ data = self._DoReadFile('34_x86_ucode.dts', True)
+
+ # Now check the device tree has no microcode
+ second = data[len(U_BOOT_NODTB_DATA):]
+ fname = tools.GetOutputFilename('test.dtb')
+ with open(fname, 'wb') as fd:
+ fd.write(second)
+ fdt = fdt_select.FdtScan(fname)
+ ucode = fdt.GetNode('/microcode')
+ self.assertTrue(ucode)
+ for node in ucode.subnodes:
+ self.assertFalse(node.props.get('data'))
+
+ fdt_len = self.GetFdtLen(second)
+ third = second[fdt_len:]
+
+ # Check that the microcode appears immediately after the Fdt
+ # This matches the concatenation of the data properties in
+ # the /microcode/update@xxx nodes in x86_ucode.dts.
+ ucode_data = struct.pack('>4L', 0x12345678, 0x12345679, 0xabcd0000,
+ 0x78235609)
+ self.assertEqual(ucode_data, third[:len(ucode_data)])
+ ucode_pos = len(U_BOOT_NODTB_DATA) + fdt_len
+
+ # Check that the microcode pointer was inserted. It should match the
+ # expected position and size
+ pos_and_size = struct.pack('<2L', 0xfffffe00 + ucode_pos,
+ len(ucode_data))
+ first = data[:len(U_BOOT_NODTB_DATA)]
+ self.assertEqual('nodtb with microcode' + pos_and_size +
+ ' somewhere in here', first)
+
+ def _RunPackUbootSingleMicrocode(self, collate):
+ """Test that x86 microcode can be handled correctly
+
+ We expect to see the following in the image, in order:
+ u-boot-nodtb.bin with a microcode pointer inserted at the correct
+ place
+ u-boot.dtb with the microcode
+ an empty microcode region
+ """
+ # We need the libfdt library to run this test since only that allows
+ # finding the offset of a property. This is required by
+ # Entry_u_boot_dtb_with_ucode.ObtainContents().
+ if not fdt_select.have_libfdt:
+ return
+ data = self._DoReadFile('35_x86_single_ucode.dts', True)
+
+ second = data[len(U_BOOT_NODTB_DATA):]
+
+ fdt_len = self.GetFdtLen(second)
+ third = second[fdt_len:]
+ second = second[:fdt_len]
+
+ if not collate:
+ ucode_data = struct.pack('>2L', 0x12345678, 0x12345679)
+ self.assertIn(ucode_data, second)
+ ucode_pos = second.find(ucode_data) + len(U_BOOT_NODTB_DATA)
+
+ # Check that the microcode pointer was inserted. It should match the
+ # expected position and size
+ pos_and_size = struct.pack('<2L', 0xfffffe00 + ucode_pos,
+ len(ucode_data))
+ first = data[:len(U_BOOT_NODTB_DATA)]
+ self.assertEqual('nodtb with microcode' + pos_and_size +
+ ' somewhere in here', first)
+
+ def testPackUbootSingleMicrocode(self):
+ """Test that x86 microcode can be handled correctly with fdt_normal.
+ """
+ self._RunPackUbootSingleMicrocode(False)
+
+ def testPackUbootSingleMicrocodeFallback(self):
+ """Test that x86 microcode can be handled correctly with fdt_fallback.
+
+ This only supports collating the microcode.
+ """
+ try:
+ old_val = fdt_select.UseFallback(True)
+ self._RunPackUbootSingleMicrocode(True)
+ finally:
+ fdt_select.UseFallback(old_val)
+
+ def testUBootImg(self):
+ """Test that u-boot.img can be put in a file"""
+ data = self._DoReadFile('36_u_boot_img.dts')
+ self.assertEqual(U_BOOT_IMG_DATA, data)
+
+ def testNoMicrocode(self):
+ """Test that a missing microcode region is detected"""
+ with self.assertRaises(ValueError) as e:
+ self._DoReadFile('37_x86_no_ucode.dts', True)
+ self.assertIn("Node '/binman/u-boot-dtb-with-ucode': No /microcode "
+ "node found in ", str(e.exception))
+
+ def testMicrocodeWithoutNode(self):
+ """Test that a missing u-boot-dtb-with-ucode node is detected"""
+ with self.assertRaises(ValueError) as e:
+ self._DoReadFile('38_x86_ucode_missing_node.dts', True)
+ self.assertIn("Node '/binman/u-boot-with-ucode-ptr': Cannot find "
+ "microcode region u-boot-dtb-with-ucode", str(e.exception))
+
+ def testMicrocodeWithoutNode2(self):
+ """Test that a missing u-boot-ucode node is detected"""
+ with self.assertRaises(ValueError) as e:
+ self._DoReadFile('39_x86_ucode_missing_node2.dts', True)
+ self.assertIn("Node '/binman/u-boot-with-ucode-ptr': Cannot find "
+ "microcode region u-boot-ucode", str(e.exception))
+
+ def testMicrocodeWithoutPtrInElf(self):
+ """Test that a U-Boot binary without the microcode symbol is detected"""
+ # ELF file without a '_dt_ucode_base_size' symbol
+ if not fdt_select.have_libfdt:
+ return
+ try:
+ with open(self.TestFile('u_boot_no_ucode_ptr')) as fd:
+ TestFunctional._MakeInputFile('u-boot', fd.read())
+
+ with self.assertRaises(ValueError) as e:
+ self._RunPackUbootSingleMicrocode(False)
+ self.assertIn("Node '/binman/u-boot-with-ucode-ptr': Cannot locate "
+ "_dt_ucode_base_size symbol in u-boot", str(e.exception))
+
+ finally:
+ # Put the original file back
+ with open(self.TestFile('u_boot_ucode_ptr')) as fd:
+ TestFunctional._MakeInputFile('u-boot', fd.read())
+
+ def testMicrocodeNotInImage(self):
+ """Test that microcode must be placed within the image"""
+ with self.assertRaises(ValueError) as e:
+ self._DoReadFile('40_x86_ucode_not_in_image.dts', True)
+ self.assertIn("Node '/binman/u-boot-with-ucode-ptr': Microcode "
+ "pointer _dt_ucode_base_size at fffffe14 is outside the "
+ "image ranging from 00000000 to 0000002e", str(e.exception))
+
+ def testWithoutMicrocode(self):
+ """Test that we can cope with an image without microcode (e.g. qemu)"""
+ with open(self.TestFile('u_boot_no_ucode_ptr')) as fd:
+ TestFunctional._MakeInputFile('u-boot', fd.read())
+ data, dtb = self._DoReadFileDtb('44_x86_optional_ucode.dts', True)
+
+ # Now check the device tree has no microcode
+ self.assertEqual(U_BOOT_NODTB_DATA, data[:len(U_BOOT_NODTB_DATA)])
+ second = data[len(U_BOOT_NODTB_DATA):]
+
+ fdt_len = self.GetFdtLen(second)
+ self.assertEqual(dtb, second[:fdt_len])
+
+ used_len = len(U_BOOT_NODTB_DATA) + fdt_len
+ third = data[used_len:]
+ self.assertEqual(chr(0) * (0x200 - used_len), third)
+
+ def testUnknownPosSize(self):
+ """Test that microcode must be placed within the image"""
+ with self.assertRaises(ValueError) as e:
+ self._DoReadFile('41_unknown_pos_size.dts', True)
+ self.assertIn("Image '/binman': Unable to set pos/size for unknown "
+ "entry 'invalid-entry'", str(e.exception))
+
+ def testPackFsp(self):
+ """Test that an image with a FSP binary can be created"""
+ data = self._DoReadFile('42_intel-fsp.dts')
+ self.assertEqual(FSP_DATA, data[:len(FSP_DATA)])
+
+ def testPackCmc(self):
+ """Test that an image with a FSP binary can be created"""
+ data = self._DoReadFile('43_intel-cmc.dts')
+ self.assertEqual(CMC_DATA, data[:len(CMC_DATA)])
diff --git a/tools/binman/image.py b/tools/binman/image.py
new file mode 100644
index 0000000..07fc930
--- /dev/null
+++ b/tools/binman/image.py
@@ -0,0 +1,229 @@
+# Copyright (c) 2016 Google, Inc
+# Written by Simon Glass <sjg@chromium.org>
+#
+# SPDX-License-Identifier: GPL-2.0+
+#
+# Class for an image, the output of binman
+#
+
+from collections import OrderedDict
+from operator import attrgetter
+
+import entry
+from entry import Entry
+import fdt_util
+import tools
+
+class Image:
+ """A Image, representing an output from binman
+
+ An image is comprised of a collection of entries each containing binary
+ data. The image size must be large enough to hold all of this data.
+
+ This class implements the various operations needed for images.
+
+ Atrtributes:
+ _node: Node object that contains the image definition in device tree
+ _name: Image name
+ _size: Image size in bytes, or None if not known yet
+ _align_size: Image size alignment, or None
+ _pad_before: Number of bytes before the first entry starts. This
+ effectively changes the place where entry position 0 starts
+ _pad_after: Number of bytes after the last entry ends. The last
+ entry will finish on or before this boundary
+ _pad_byte: Byte to use to pad the image where there is no entry
+ _filename: Output filename for image
+ _sort: True if entries should be sorted by position, False if they
+ must be in-order in the device tree description
+ _skip_at_start: Number of bytes before the first entry starts. These
+ effecively adjust the starting position of entries. For example,
+ if _pad_before is 16, then the first entry would start at 16.
+ An entry with pos = 20 would in fact be written at position 4
+ in the image file.
+ _end_4gb: Indicates that the image ends at the 4GB boundary. This is
+ used for x86 images, which want to use positions such that a
+ memory address (like 0xff800000) is the first entry position.
+ This causes _skip_at_start to be set to the starting memory
+ address.
+ _entries: OrderedDict() of entries
+ """
+ def __init__(self, name, node):
+ self._node = node
+ self._name = name
+ self._size = None
+ self._align_size = None
+ self._pad_before = 0
+ self._pad_after = 0
+ self._pad_byte = 0
+ self._filename = '%s.bin' % self._name
+ self._sort = False
+ self._skip_at_start = 0
+ self._end_4gb = False
+ self._entries = OrderedDict()
+
+ self._ReadNode()
+ self._ReadEntries()
+
+ def _ReadNode(self):
+ """Read properties from the image node"""
+ self._size = fdt_util.GetInt(self._node, 'size')
+ self._align_size = fdt_util.GetInt(self._node, 'align-size')
+ if tools.NotPowerOfTwo(self._align_size):
+ self._Raise("Alignment size %s must be a power of two" %
+ self._align_size)
+ self._pad_before = fdt_util.GetInt(self._node, 'pad-before', 0)
+ self._pad_after = fdt_util.GetInt(self._node, 'pad-after', 0)
+ self._pad_byte = fdt_util.GetInt(self._node, 'pad-byte', 0)
+ filename = fdt_util.GetString(self._node, 'filename')
+ if filename:
+ self._filename = filename
+ self._sort = fdt_util.GetBool(self._node, 'sort-by-pos')
+ self._end_4gb = fdt_util.GetBool(self._node, 'end-at-4gb')
+ if self._end_4gb and not self._size:
+ self._Raise("Image size must be provided when using end-at-4gb")
+ if self._end_4gb:
+ self._skip_at_start = 0x100000000 - self._size
+
+ def CheckSize(self):
+ """Check that the image contents does not exceed its size, etc."""
+ contents_size = 0
+ for entry in self._entries.values():
+ contents_size = max(contents_size, entry.pos + entry.size)
+
+ contents_size -= self._skip_at_start
+
+ size = self._size
+ if not size:
+ size = self._pad_before + contents_size + self._pad_after
+ size = tools.Align(size, self._align_size)
+
+ if self._size and contents_size > self._size:
+ self._Raise("contents size %#x (%d) exceeds image size %#x (%d)" %
+ (contents_size, contents_size, self._size, self._size))
+ if not self._size:
+ self._size = size
+ if self._size != tools.Align(self._size, self._align_size):
+ self._Raise("Size %#x (%d) does not match align-size %#x (%d)" %
+ (self._size, self._size, self._align_size, self._align_size))
+
+ def _Raise(self, msg):
+ """Raises an error for this image
+
+ Args:
+ msg: Error message to use in the raise string
+ Raises:
+ ValueError()
+ """
+ raise ValueError("Image '%s': %s" % (self._node.path, msg))
+
+ def _ReadEntries(self):
+ for node in self._node.subnodes:
+ self._entries[node.name] = Entry.Create(self, node)
+
+ def FindEntryType(self, etype):
+ """Find an entry type in the image
+
+ Args:
+ etype: Entry type to find
+ Returns:
+ entry matching that type, or None if not found
+ """
+ for entry in self._entries.values():
+ if entry.etype == etype:
+ return entry
+ return None
+
+ def GetEntryContents(self):
+ """Call ObtainContents() for each entry
+
+ This calls each entry's ObtainContents() a few times until they all
+ return True. We stop calling an entry's function once it returns
+ True. This allows the contents of one entry to depend on another.
+
+ After 3 rounds we give up since it's likely an error.
+ """
+ todo = self._entries.values()
+ for passnum in range(3):
+ next_todo = []
+ for entry in todo:
+ if not entry.ObtainContents():
+ next_todo.append(entry)
+ todo = next_todo
+ if not todo:
+ break
+
+ def _SetEntryPosSize(self, name, pos, size):
+ """Set the position and size of an entry
+
+ Args:
+ name: Entry name to update
+ pos: New position
+ size: New size
+ """
+ entry = self._entries.get(name)
+ if not entry:
+ self._Raise("Unable to set pos/size for unknown entry '%s'" % name)
+ entry.SetPositionSize(self._skip_at_start + pos, size)
+
+ def GetEntryPositions(self):
+ """Handle entries that want to set the position/size of other entries
+
+ This calls each entry's GetPositions() method. If it returns a list
+ of entries to update, it updates them.
+ """
+ for entry in self._entries.values():
+ pos_dict = entry.GetPositions()
+ for name, info in pos_dict.iteritems():
+ self._SetEntryPosSize(name, *info)
+
+ def PackEntries(self):
+ """Pack all entries into the image"""
+ pos = self._skip_at_start
+ for entry in self._entries.values():
+ pos = entry.Pack(pos)
+
+ def _SortEntries(self):
+ """Sort entries by position"""
+ entries = sorted(self._entries.values(), key=lambda entry: entry.pos)
+ self._entries.clear()
+ for entry in entries:
+ self._entries[entry._node.name] = entry
+
+ def CheckEntries(self):
+ """Check that entries do not overlap or extend outside the image"""
+ if self._sort:
+ self._SortEntries()
+ pos = 0
+ prev_name = 'None'
+ for entry in self._entries.values():
+ if (entry.pos < self._skip_at_start or
+ entry.pos >= self._skip_at_start + self._size):
+ entry.Raise("Position %#x (%d) is outside the image starting "
+ "at %#x (%d)" %
+ (entry.pos, entry.pos, self._skip_at_start,
+ self._skip_at_start))
+ if entry.pos < pos:
+ entry.Raise("Position %#x (%d) overlaps with previous entry '%s' "
+ "ending at %#x (%d)" %
+ (entry.pos, entry.pos, prev_name, pos, pos))
+ pos = entry.pos + entry.size
+ prev_name = entry.GetPath()
+
+ def ProcessEntryContents(self):
+ """Call the ProcessContents() method for each entry
+
+ This is intended to adjust the contents as needed by the entry type.
+ """
+ for entry in self._entries.values():
+ entry.ProcessContents()
+
+ def BuildImage(self):
+ """Write the image to a file"""
+ fname = tools.GetOutputFilename(self._filename)
+ with open(fname, 'wb') as fd:
+ fd.write(chr(self._pad_byte) * self._size)
+
+ for entry in self._entries.values():
+ data = entry.GetData()
+ fd.seek(self._pad_before + entry.pos - self._skip_at_start)
+ fd.write(data)
diff --git a/tools/binman/test/01_invalid.dts b/tools/binman/test/01_invalid.dts
new file mode 100644
index 0000000..7d00455
--- /dev/null
+++ b/tools/binman/test/01_invalid.dts
@@ -0,0 +1,5 @@
+/dts-v1/;
+
+/ {
+ #address-cells = <1>;
+ #size-cells = <1>;
diff --git a/tools/binman/test/02_missing_node.dts b/tools/binman/test/02_missing_node.dts
new file mode 100644
index 0000000..3a51ec2
--- /dev/null
+++ b/tools/binman/test/02_missing_node.dts
@@ -0,0 +1,6 @@
+/dts-v1/;
+
+/ {
+ #address-cells = <1>;
+ #size-cells = <1>;
+};
diff --git a/tools/binman/test/03_empty.dts b/tools/binman/test/03_empty.dts
new file mode 100644
index 0000000..493c9a0
--- /dev/null
+++ b/tools/binman/test/03_empty.dts
@@ -0,0 +1,9 @@
+/dts-v1/;
+
+/ {
+ #address-cells = <1>;
+ #size-cells = <1>;
+
+ binman {
+ };
+};
diff --git a/tools/binman/test/04_invalid_entry.dts b/tools/binman/test/04_invalid_entry.dts
new file mode 100644
index 0000000..b043455
--- /dev/null
+++ b/tools/binman/test/04_invalid_entry.dts
@@ -0,0 +1,11 @@
+/dts-v1/;
+
+/ {
+ #address-cells = <1>;
+ #size-cells = <1>;
+
+ binman {
+ not-a-valid-type {
+ };
+ };
+};
diff --git a/tools/binman/test/05_simple.dts b/tools/binman/test/05_simple.dts
new file mode 100644
index 0000000..3771aa2
--- /dev/null
+++ b/tools/binman/test/05_simple.dts
@@ -0,0 +1,11 @@
+/dts-v1/;
+
+/ {
+ #address-cells = <1>;
+ #size-cells = <1>;
+
+ binman {
+ u-boot {
+ };
+ };
+};
diff --git a/tools/binman/test/06_dual_image.dts b/tools/binman/test/06_dual_image.dts
new file mode 100644
index 0000000..78be16f
--- /dev/null
+++ b/tools/binman/test/06_dual_image.dts
@@ -0,0 +1,22 @@
+/dts-v1/;
+
+/ {
+ #address-cells = <1>;
+ #size-cells = <1>;
+
+ binman {
+ multiple-images;
+ image1 {
+ u-boot {
+ };
+ };
+
+ image2 {
+ pad-before = <3>;
+ pad-after = <5>;
+
+ u-boot {
+ };
+ };
+ };
+};
diff --git a/tools/binman/test/07_bad_align.dts b/tools/binman/test/07_bad_align.dts
new file mode 100644
index 0000000..123bb13
--- /dev/null
+++ b/tools/binman/test/07_bad_align.dts
@@ -0,0 +1,12 @@
+/dts-v1/;
+
+/ {
+ #address-cells = <1>;
+ #size-cells = <1>;
+
+ binman {
+ u-boot {
+ align = <23>;
+ };
+ };
+};
diff --git a/tools/binman/test/08_pack.dts b/tools/binman/test/08_pack.dts
new file mode 100644
index 0000000..dc63d99
--- /dev/null
+++ b/tools/binman/test/08_pack.dts
@@ -0,0 +1,30 @@
+/dts-v1/;
+
+/ {
+ #address-cells = <1>;
+ #size-cells = <1>;
+
+ binman {
+ u-boot {
+ };
+
+ u-boot-align {
+ type = "u-boot";
+ align = <16>;
+ };
+
+ u-boot-size {
+ type = "u-boot";
+ size = <23>;
+ };
+
+ u-boot-next {
+ type = "u-boot";
+ };
+
+ u-boot-fixed {
+ type = "u-boot";
+ pos = <61>;
+ };
+ };
+};
diff --git a/tools/binman/test/09_pack_extra.dts b/tools/binman/test/09_pack_extra.dts
new file mode 100644
index 0000000..0765707
--- /dev/null
+++ b/tools/binman/test/09_pack_extra.dts
@@ -0,0 +1,35 @@
+/dts-v1/;
+
+/ {
+ #address-cells = <1>;
+ #size-cells = <1>;
+
+ binman {
+ u-boot {
+ pad-before = <3>;
+ pad-after = <5>;
+ };
+
+ u-boot-align-size-nop {
+ type = "u-boot";
+ align-size = <4>;
+ };
+
+ u-boot-align-size {
+ type = "u-boot";
+ align = <16>;
+ align-size = <32>;
+ };
+
+ u-boot-align-end {
+ type = "u-boot";
+ align-end = <64>;
+ };
+
+ u-boot-align-both {
+ type = "u-boot";
+ align= <64>;
+ align-end = <128>;
+ };
+ };
+};
diff --git a/tools/binman/test/10_pack_align_power2.dts b/tools/binman/test/10_pack_align_power2.dts
new file mode 100644
index 0000000..8f6253a
--- /dev/null
+++ b/tools/binman/test/10_pack_align_power2.dts
@@ -0,0 +1,12 @@
+/dts-v1/;
+
+/ {
+ #address-cells = <1>;
+ #size-cells = <1>;
+
+ binman {
+ u-boot {
+ align = <5>;
+ };
+ };
+};
diff --git a/tools/binman/test/11_pack_align_size_power2.dts b/tools/binman/test/11_pack_align_size_power2.dts
new file mode 100644
index 0000000..04f7672
--- /dev/null
+++ b/tools/binman/test/11_pack_align_size_power2.dts
@@ -0,0 +1,12 @@
+/dts-v1/;
+
+/ {
+ #address-cells = <1>;
+ #size-cells = <1>;
+
+ binman {
+ u-boot {
+ align-size = <55>;
+ };
+ };
+};
diff --git a/tools/binman/test/12_pack_inv_align.dts b/tools/binman/test/12_pack_inv_align.dts
new file mode 100644
index 0000000..1d9d80a
--- /dev/null
+++ b/tools/binman/test/12_pack_inv_align.dts
@@ -0,0 +1,13 @@
+/dts-v1/;
+
+/ {
+ #address-cells = <1>;
+ #size-cells = <1>;
+
+ binman {
+ u-boot {
+ pos = <5>;
+ align = <4>;
+ };
+ };
+};
diff --git a/tools/binman/test/13_pack_inv_size_align.dts b/tools/binman/test/13_pack_inv_size_align.dts
new file mode 100644
index 0000000..dfafa13
--- /dev/null
+++ b/tools/binman/test/13_pack_inv_size_align.dts
@@ -0,0 +1,13 @@
+/dts-v1/;
+
+/ {
+ #address-cells = <1>;
+ #size-cells = <1>;
+
+ binman {
+ u-boot {
+ size = <5>;
+ align-size = <4>;
+ };
+ };
+};
diff --git a/tools/binman/test/14_pack_overlap.dts b/tools/binman/test/14_pack_overlap.dts
new file mode 100644
index 0000000..611cfd9
--- /dev/null
+++ b/tools/binman/test/14_pack_overlap.dts
@@ -0,0 +1,16 @@
+/dts-v1/;
+
+/ {
+ #address-cells = <1>;
+ #size-cells = <1>;
+
+ binman {
+ u-boot {
+ };
+
+ u-boot-align {
+ type = "u-boot";
+ pos = <3>;
+ };
+ };
+};
diff --git a/tools/binman/test/15_pack_overflow.dts b/tools/binman/test/15_pack_overflow.dts
new file mode 100644
index 0000000..6f65433
--- /dev/null
+++ b/tools/binman/test/15_pack_overflow.dts
@@ -0,0 +1,12 @@
+/dts-v1/;
+
+/ {
+ #address-cells = <1>;
+ #size-cells = <1>;
+
+ binman {
+ u-boot {
+ size = <3>;
+ };
+ };
+};
diff --git a/tools/binman/test/16_pack_image_overflow.dts b/tools/binman/test/16_pack_image_overflow.dts
new file mode 100644
index 0000000..6ae66f3
--- /dev/null
+++ b/tools/binman/test/16_pack_image_overflow.dts
@@ -0,0 +1,13 @@
+/dts-v1/;
+
+/ {
+ #address-cells = <1>;
+ #size-cells = <1>;
+
+ binman {
+ size = <3>;
+
+ u-boot {
+ };
+ };
+};
diff --git a/tools/binman/test/17_pack_image_size.dts b/tools/binman/test/17_pack_image_size.dts
new file mode 100644
index 0000000..2360eb5
--- /dev/null
+++ b/tools/binman/test/17_pack_image_size.dts
@@ -0,0 +1,13 @@
+/dts-v1/;
+
+/ {
+ #address-cells = <1>;
+ #size-cells = <1>;
+
+ binman {
+ size = <7>;
+
+ u-boot {
+ };
+ };
+};
diff --git a/tools/binman/test/18_pack_image_align.dts b/tools/binman/test/18_pack_image_align.dts
new file mode 100644
index 0000000..16cd2a4
--- /dev/null
+++ b/tools/binman/test/18_pack_image_align.dts
@@ -0,0 +1,13 @@
+/dts-v1/;
+
+/ {
+ #address-cells = <1>;
+ #size-cells = <1>;
+
+ binman {
+ align-size = <16>;
+
+ u-boot {
+ };
+ };
+};
diff --git a/tools/binman/test/19_pack_inv_image_align.dts b/tools/binman/test/19_pack_inv_image_align.dts
new file mode 100644
index 0000000..e5ee87b
--- /dev/null
+++ b/tools/binman/test/19_pack_inv_image_align.dts
@@ -0,0 +1,14 @@
+/dts-v1/;
+
+/ {
+ #address-cells = <1>;
+ #size-cells = <1>;
+
+ binman {
+ size = <7>;
+ align-size = <8>;
+
+ u-boot {
+ };
+ };
+};
diff --git a/tools/binman/test/20_pack_inv_image_align_power2.dts b/tools/binman/test/20_pack_inv_image_align_power2.dts
new file mode 100644
index 0000000..a428c4b
--- /dev/null
+++ b/tools/binman/test/20_pack_inv_image_align_power2.dts
@@ -0,0 +1,13 @@
+/dts-v1/;
+
+/ {
+ #address-cells = <1>;
+ #size-cells = <1>;
+
+ binman {
+ align-size = <131>;
+
+ u-boot {
+ };
+ };
+};
diff --git a/tools/binman/test/21_image_pad.dts b/tools/binman/test/21_image_pad.dts
new file mode 100644
index 0000000..daf8385f
--- /dev/null
+++ b/tools/binman/test/21_image_pad.dts
@@ -0,0 +1,16 @@
+/dts-v1/;
+
+/ {
+ #address-cells = <1>;
+ #size-cells = <1>;
+
+ binman {
+ pad-byte = <0xff>;
+ u-boot-spl {
+ };
+
+ u-boot {
+ pos = <12>;
+ };
+ };
+};
diff --git a/tools/binman/test/22_image_name.dts b/tools/binman/test/22_image_name.dts
new file mode 100644
index 0000000..94fc069
--- /dev/null
+++ b/tools/binman/test/22_image_name.dts
@@ -0,0 +1,21 @@
+/dts-v1/;
+
+/ {
+ #address-cells = <1>;
+ #size-cells = <1>;
+
+ binman {
+ multiple-images;
+ image1 {
+ filename = "test-name";
+ u-boot {
+ };
+ };
+
+ image2 {
+ filename = "test-name.xx";
+ u-boot {
+ };
+ };
+ };
+};
diff --git a/tools/binman/test/23_blob.dts b/tools/binman/test/23_blob.dts
new file mode 100644
index 0000000..7dcff69
--- /dev/null
+++ b/tools/binman/test/23_blob.dts
@@ -0,0 +1,12 @@
+/dts-v1/;
+
+/ {
+ #address-cells = <1>;
+ #size-cells = <1>;
+
+ binman {
+ blob {
+ filename = "blobfile";
+ };
+ };
+};
diff --git a/tools/binman/test/24_sorted.dts b/tools/binman/test/24_sorted.dts
new file mode 100644
index 0000000..9f4151c
--- /dev/null
+++ b/tools/binman/test/24_sorted.dts
@@ -0,0 +1,17 @@
+/dts-v1/;
+
+/ {
+ #address-cells = <1>;
+ #size-cells = <1>;
+
+ binman {
+ sort-by-pos;
+ u-boot {
+ pos = <10>;
+ };
+
+ u-boot-spl {
+ pos = <5>;
+ };
+ };
+};
diff --git a/tools/binman/test/25_pack_zero_size.dts b/tools/binman/test/25_pack_zero_size.dts
new file mode 100644
index 0000000..7d2baad
--- /dev/null
+++ b/tools/binman/test/25_pack_zero_size.dts
@@ -0,0 +1,15 @@
+/dts-v1/;
+
+/ {
+ #address-cells = <1>;
+ #size-cells = <1>;
+
+ binman {
+ u-boot {
+ };
+
+ u-boot-spl {
+ pos = <0>;
+ };
+ };
+};
diff --git a/tools/binman/test/26_pack_u_boot_dtb.dts b/tools/binman/test/26_pack_u_boot_dtb.dts
new file mode 100644
index 0000000..2707a73
--- /dev/null
+++ b/tools/binman/test/26_pack_u_boot_dtb.dts
@@ -0,0 +1,14 @@
+/dts-v1/;
+
+/ {
+ #address-cells = <1>;
+ #size-cells = <1>;
+
+ binman {
+ u-boot-nodtb {
+ };
+
+ u-boot-dtb {
+ };
+ };
+};
diff --git a/tools/binman/test/27_pack_4gb_no_size.dts b/tools/binman/test/27_pack_4gb_no_size.dts
new file mode 100644
index 0000000..e0b6519
--- /dev/null
+++ b/tools/binman/test/27_pack_4gb_no_size.dts
@@ -0,0 +1,18 @@
+/dts-v1/;
+
+/ {
+ #address-cells = <1>;
+ #size-cells = <1>;
+
+ binman {
+ sort-by-pos;
+ end-at-4gb;
+ u-boot {
+ pos = <0xfffffff0>;
+ };
+
+ u-boot-spl {
+ pos = <0xfffffff7>;
+ };
+ };
+};
diff --git a/tools/binman/test/28_pack_4gb_outside.dts b/tools/binman/test/28_pack_4gb_outside.dts
new file mode 100644
index 0000000..ff468c7
--- /dev/null
+++ b/tools/binman/test/28_pack_4gb_outside.dts
@@ -0,0 +1,19 @@
+/dts-v1/;
+
+/ {
+ #address-cells = <1>;
+ #size-cells = <1>;
+
+ binman {
+ sort-by-pos;
+ end-at-4gb;
+ size = <16>;
+ u-boot {
+ pos = <0>;
+ };
+
+ u-boot-spl {
+ pos = <0xfffffff7>;
+ };
+ };
+};
diff --git a/tools/binman/test/29_x86-rom.dts b/tools/binman/test/29_x86-rom.dts
new file mode 100644
index 0000000..075ede3
--- /dev/null
+++ b/tools/binman/test/29_x86-rom.dts
@@ -0,0 +1,19 @@
+/dts-v1/;
+
+/ {
+ #address-cells = <1>;
+ #size-cells = <1>;
+
+ binman {
+ sort-by-pos;
+ end-at-4gb;
+ size = <16>;
+ u-boot {
+ pos = <0xfffffff0>;
+ };
+
+ u-boot-spl {
+ pos = <0xfffffff7>;
+ };
+ };
+};
diff --git a/tools/binman/test/30_x86-rom-me-no-desc.dts b/tools/binman/test/30_x86-rom-me-no-desc.dts
new file mode 100644
index 0000000..4578f66
--- /dev/null
+++ b/tools/binman/test/30_x86-rom-me-no-desc.dts
@@ -0,0 +1,15 @@
+/dts-v1/;
+
+/ {
+ #address-cells = <1>;
+ #size-cells = <1>;
+
+ binman {
+ sort-by-pos;
+ end-at-4gb;
+ size = <16>;
+ intel-me {
+ pos-unset;
+ };
+ };
+};
diff --git a/tools/binman/test/31_x86-rom-me.dts b/tools/binman/test/31_x86-rom-me.dts
new file mode 100644
index 0000000..b484ab3
--- /dev/null
+++ b/tools/binman/test/31_x86-rom-me.dts
@@ -0,0 +1,18 @@
+/dts-v1/;
+
+/ {
+ #address-cells = <1>;
+ #size-cells = <1>;
+
+ binman {
+ sort-by-pos;
+ end-at-4gb;
+ size = <0x800000>;
+ intel-descriptor {
+ };
+
+ intel-me {
+ pos-unset;
+ };
+ };
+};
diff --git a/tools/binman/test/32_intel-vga.dts b/tools/binman/test/32_intel-vga.dts
new file mode 100644
index 0000000..1790833
--- /dev/null
+++ b/tools/binman/test/32_intel-vga.dts
@@ -0,0 +1,13 @@
+/dts-v1/;
+
+/ {
+ #address-cells = <1>;
+ #size-cells = <1>;
+
+ binman {
+ size = <16>;
+
+ intel-vga {
+ };
+ };
+};
diff --git a/tools/binman/test/33_x86-start16.dts b/tools/binman/test/33_x86-start16.dts
new file mode 100644
index 0000000..2e279de
--- /dev/null
+++ b/tools/binman/test/33_x86-start16.dts
@@ -0,0 +1,13 @@
+/dts-v1/;
+
+/ {
+ #address-cells = <1>;
+ #size-cells = <1>;
+
+ binman {
+ size = <16>;
+
+ x86-start16 {
+ };
+ };
+};
diff --git a/tools/binman/test/34_x86_ucode.dts b/tools/binman/test/34_x86_ucode.dts
new file mode 100644
index 0000000..64a6c2c
--- /dev/null
+++ b/tools/binman/test/34_x86_ucode.dts
@@ -0,0 +1,29 @@
+/dts-v1/;
+
+/ {
+ #address-cells = <1>;
+ #size-cells = <1>;
+
+ binman {
+ sort-by-pos;
+ end-at-4gb;
+ size = <0x200>;
+ u-boot-with-ucode-ptr {
+ };
+
+ u-boot-dtb-with-ucode {
+ };
+
+ u-boot-ucode {
+ };
+ };
+
+ microcode {
+ update@0 {
+ data = <0x12345678 0x12345679>;
+ };
+ update@1 {
+ data = <0xabcd0000 0x78235609>;
+ };
+ };
+};
diff --git a/tools/binman/test/35_x86_single_ucode.dts b/tools/binman/test/35_x86_single_ucode.dts
new file mode 100644
index 0000000..973e97f
--- /dev/null
+++ b/tools/binman/test/35_x86_single_ucode.dts
@@ -0,0 +1,26 @@
+/dts-v1/;
+
+/ {
+ #address-cells = <1>;
+ #size-cells = <1>;
+
+ binman {
+ sort-by-pos;
+ end-at-4gb;
+ size = <0x200>;
+ u-boot-with-ucode-ptr {
+ };
+
+ u-boot-dtb-with-ucode {
+ };
+
+ u-boot-ucode {
+ };
+ };
+
+ microcode {
+ update@0 {
+ data = <0x12345678 0x12345679>;
+ };
+ };
+};
diff --git a/tools/binman/test/36_u_boot_img.dts b/tools/binman/test/36_u_boot_img.dts
new file mode 100644
index 0000000..aa5a3fe
--- /dev/null
+++ b/tools/binman/test/36_u_boot_img.dts
@@ -0,0 +1,11 @@
+/dts-v1/;
+
+/ {
+ #address-cells = <1>;
+ #size-cells = <1>;
+
+ binman {
+ u-boot-img {
+ };
+ };
+};
diff --git a/tools/binman/test/37_x86_no_ucode.dts b/tools/binman/test/37_x86_no_ucode.dts
new file mode 100644
index 0000000..9e12156
--- /dev/null
+++ b/tools/binman/test/37_x86_no_ucode.dts
@@ -0,0 +1,20 @@
+/dts-v1/;
+
+/ {
+ #address-cells = <1>;
+ #size-cells = <1>;
+
+ binman {
+ sort-by-pos;
+ end-at-4gb;
+ size = <0x200>;
+ u-boot-with-ucode-ptr {
+ };
+
+ u-boot-dtb-with-ucode {
+ };
+
+ u-boot-ucode {
+ };
+ };
+};
diff --git a/tools/binman/test/38_x86_ucode_missing_node.dts b/tools/binman/test/38_x86_ucode_missing_node.dts
new file mode 100644
index 0000000..d6cf0d8
--- /dev/null
+++ b/tools/binman/test/38_x86_ucode_missing_node.dts
@@ -0,0 +1,26 @@
+/dts-v1/;
+
+/ {
+ #address-cells = <1>;
+ #size-cells = <1>;
+
+ binman {
+ sort-by-pos;
+ end-at-4gb;
+ size = <0x200>;
+ u-boot-with-ucode-ptr {
+ };
+
+ u-boot-ucode {
+ };
+ };
+
+ microcode {
+ update@0 {
+ data = <0x12345678 0x12345679>;
+ };
+ update@1 {
+ data = <0xabcd0000 0x78235609>;
+ };
+ };
+};
diff --git a/tools/binman/test/39_x86_ucode_missing_node2.dts b/tools/binman/test/39_x86_ucode_missing_node2.dts
new file mode 100644
index 0000000..b7e26c5
--- /dev/null
+++ b/tools/binman/test/39_x86_ucode_missing_node2.dts
@@ -0,0 +1,23 @@
+/dts-v1/;
+
+/ {
+ #address-cells = <1>;
+ #size-cells = <1>;
+
+ binman {
+ sort-by-pos;
+ end-at-4gb;
+ size = <0x200>;
+ u-boot-with-ucode-ptr {
+ };
+ };
+
+ microcode {
+ update@0 {
+ data = <0x12345678 0x12345679>;
+ };
+ update@1 {
+ data = <0xabcd0000 0x78235609>;
+ };
+ };
+};
diff --git a/tools/binman/test/40_x86_ucode_not_in_image.dts b/tools/binman/test/40_x86_ucode_not_in_image.dts
new file mode 100644
index 0000000..67d17d3
--- /dev/null
+++ b/tools/binman/test/40_x86_ucode_not_in_image.dts
@@ -0,0 +1,28 @@
+/dts-v1/;
+
+/ {
+ #address-cells = <1>;
+ #size-cells = <1>;
+
+ binman {
+ sort-by-pos;
+ size = <0x200>;
+ u-boot-with-ucode-ptr {
+ };
+
+ u-boot-dtb-with-ucode {
+ };
+
+ u-boot-ucode {
+ };
+ };
+
+ microcode {
+ update@0 {
+ data = <0x12345678 0x12345679>;
+ };
+ update@1 {
+ data = <0xabcd0000 0x78235609>;
+ };
+ };
+};
diff --git a/tools/binman/test/41_unknown_pos_size.dts b/tools/binman/test/41_unknown_pos_size.dts
new file mode 100644
index 0000000..a8e7d8a
--- /dev/null
+++ b/tools/binman/test/41_unknown_pos_size.dts
@@ -0,0 +1,11 @@
+/dts-v1/;
+
+/ {
+ #address-cells = <1>;
+ #size-cells = <1>;
+
+ binman {
+ _testing {
+ };
+ };
+};
diff --git a/tools/binman/test/42_intel-fsp.dts b/tools/binman/test/42_intel-fsp.dts
new file mode 100644
index 0000000..e0a1e76
--- /dev/null
+++ b/tools/binman/test/42_intel-fsp.dts
@@ -0,0 +1,13 @@
+/dts-v1/;
+
+/ {
+ #address-cells = <1>;
+ #size-cells = <1>;
+
+ binman {
+ size = <16>;
+
+ intel-fsp {
+ };
+ };
+};
diff --git a/tools/binman/test/43_intel-cmc.dts b/tools/binman/test/43_intel-cmc.dts
new file mode 100644
index 0000000..26c456d
--- /dev/null
+++ b/tools/binman/test/43_intel-cmc.dts
@@ -0,0 +1,13 @@
+/dts-v1/;
+
+/ {
+ #address-cells = <1>;
+ #size-cells = <1>;
+
+ binman {
+ size = <16>;
+
+ intel-cmc {
+ };
+ };
+};
diff --git a/tools/binman/test/44_x86_optional_ucode.dts b/tools/binman/test/44_x86_optional_ucode.dts
new file mode 100644
index 0000000..abe1322
--- /dev/null
+++ b/tools/binman/test/44_x86_optional_ucode.dts
@@ -0,0 +1,30 @@
+/dts-v1/;
+
+/ {
+ #address-cells = <1>;
+ #size-cells = <1>;
+
+ binman {
+ sort-by-pos;
+ end-at-4gb;
+ size = <0x200>;
+ u-boot-with-ucode-ptr {
+ optional-ucode;
+ };
+
+ u-boot-dtb-with-ucode {
+ };
+
+ u-boot-ucode {
+ };
+ };
+
+ microcode {
+ update@0 {
+ data = <0x12345678 0x12345679>;
+ };
+ update@1 {
+ data = <0xabcd0000 0x78235609>;
+ };
+ };
+};
diff --git a/tools/binman/test/descriptor.bin b/tools/binman/test/descriptor.bin
new file mode 100644
index 0000000..3d54943
--- /dev/null
+++ b/tools/binman/test/descriptor.bin
Binary files differ
diff --git a/tools/binman/test/u_boot_no_ucode_ptr b/tools/binman/test/u_boot_no_ucode_ptr
new file mode 100755
index 0000000..f72462f
--- /dev/null
+++ b/tools/binman/test/u_boot_no_ucode_ptr
Binary files differ
diff --git a/tools/binman/test/u_boot_no_ucode_ptr.c b/tools/binman/test/u_boot_no_ucode_ptr.c
new file mode 100644
index 0000000..a17bb4c
--- /dev/null
+++ b/tools/binman/test/u_boot_no_ucode_ptr.c
@@ -0,0 +1,15 @@
+/*
+ * Copyright (c) 2016 Google, Inc
+ *
+ * SPDX-License-Identifier: GPL-2.0+
+ *
+ * Simple program to create a bad _dt_ucode_base_size symbol to create an
+ * error when it is used. This is used by binman tests.
+ *
+ * Build with:
+ * cc -march=i386 -m32 -o u_boot_no_ucode_ptr -T u_boot_ucode_ptr.lds \
+ -nostdlib u_boot_no_ucode_ptr.c
+ */
+
+static unsigned long not__dt_ucode_base_size[2]
+ __attribute__((section(".ucode"))) = {1, 2};
diff --git a/tools/binman/test/u_boot_ucode_ptr b/tools/binman/test/u_boot_ucode_ptr
new file mode 100755
index 0000000..dbfb184
--- /dev/null
+++ b/tools/binman/test/u_boot_ucode_ptr
Binary files differ
diff --git a/tools/binman/test/u_boot_ucode_ptr.c b/tools/binman/test/u_boot_ucode_ptr.c
new file mode 100644
index 0000000..434c9f4
--- /dev/null
+++ b/tools/binman/test/u_boot_ucode_ptr.c
@@ -0,0 +1,15 @@
+/*
+ * Copyright (c) 2016 Google, Inc
+ *
+ * SPDX-License-Identifier: GPL-2.0+
+ *
+ * Simple program to create a _dt_ucode_base_size symbol which can be read
+ * by 'nm'. This is used by binman tests.
+ *
+ * Build with:
+ * cc -march=i386 -m32 -o u_boot_ucode_ptr -T u_boot_ucode_ptr.lds -nostdlib \
+ u_boot_ucode_ptr.c
+ */
+
+static unsigned long _dt_ucode_base_size[2]
+ __attribute__((section(".ucode"))) = {1, 2};
diff --git a/tools/binman/test/u_boot_ucode_ptr.lds b/tools/binman/test/u_boot_ucode_ptr.lds
new file mode 100644
index 0000000..167debf
--- /dev/null
+++ b/tools/binman/test/u_boot_ucode_ptr.lds
@@ -0,0 +1,18 @@
+/*
+ * Copyright (c) 2016 Google, Inc
+ *
+ * SPDX-License-Identifier: GPL-2.0+
+ */
+
+OUTPUT_FORMAT("elf32-i386", "elf32-i386", "elf32-i386")
+OUTPUT_ARCH(i386)
+ENTRY(_start)
+
+SECTIONS
+{
+ . = 0xfffffdf0;
+ _start = .;
+ .ucode : {
+ *(.ucode)
+ }
+}
diff --git a/tools/ifdtool.c b/tools/ifdtool.c
index 48059c0..195b153 100644
--- a/tools/ifdtool.c
+++ b/tools/ifdtool.c
@@ -33,16 +33,9 @@
#define FLREG_BASE(reg) ((reg & 0x00000fff) << 12);
#define FLREG_LIMIT(reg) (((reg & 0x0fff0000) >> 4) | 0xfff);
-enum input_file_type_t {
- IF_normal,
- IF_fdt,
- IF_uboot,
-};
-
struct input_file {
char *fname;
unsigned int addr;
- enum input_file_type_t type;
};
/**
@@ -760,219 +753,6 @@
return write_size;
}
-static int scan_ucode(const void *blob, char *ucode_base, int *countp,
- const char **datap, int *data_sizep)
-{
- const char *data = NULL;
- int node, count;
- int data_size;
- char *ucode;
-
- for (node = 0, count = 0, ucode = ucode_base; node >= 0; count++) {
- node = fdt_node_offset_by_compatible(blob, node,
- "intel,microcode");
- if (node < 0)
- break;
-
- data = fdt_getprop(blob, node, "data", &data_size);
- if (!data) {
- debug("Missing microcode data in FDT '%s': %s\n",
- fdt_get_name(blob, node, NULL),
- fdt_strerror(data_size));
- return -ENOENT;
- }
-
- if (ucode_base)
- memcpy(ucode, data, data_size);
- ucode += data_size;
- }
-
- if (countp)
- *countp = count;
- if (datap)
- *datap = data;
- if (data_sizep)
- *data_sizep = data_size;
-
- return ucode - ucode_base;
-}
-
-static int remove_ucode(char *blob)
-{
- int node, count;
- int ret;
-
- /* Keep going until we find no more microcode to remove */
- do {
- for (node = 0, count = 0; node >= 0;) {
- int ret;
-
- node = fdt_node_offset_by_compatible(blob, node,
- "intel,microcode");
- if (node < 0)
- break;
-
- ret = fdt_delprop(blob, node, "data");
-
- /*
- * -FDT_ERR_NOTFOUND means we already removed the
- * data for this one, so we just continue.
- * 0 means we did remove it, so offsets may have
- * changed and we need to restart our scan.
- * Anything else indicates an error we should report.
- */
- if (ret == -FDT_ERR_NOTFOUND)
- continue;
- else if (!ret)
- node = 0;
- else
- return ret;
- }
- } while (count);
-
- /* Pack down to remove excees space */
- ret = fdt_pack(blob);
- if (ret)
- return ret;
-
- return fdt_totalsize(blob);
-}
-
-static int write_ucode(char *image, int size, struct input_file *fdt,
- int fdt_size, unsigned int ucode_ptr,
- int collate_ucode)
-{
- const char *data = NULL;
- char *ucode_buf;
- const void *blob;
- char *ucode_base;
- uint32_t *ptr;
- int ucode_size;
- int data_size;
- int offset;
- int count;
- int ret;
-
- blob = (void *)image + (uint32_t)(fdt->addr + size);
-
- debug("DTB at %lx\n", (char *)blob - image);
-
- /* Find out about the micrcode we have */
- ucode_size = scan_ucode(blob, NULL, &count, &data, &data_size);
- if (ucode_size < 0)
- return ucode_size;
- if (!count) {
- debug("No microcode found in FDT\n");
- return -ENOENT;
- }
-
- if (count > 1 && !collate_ucode) {
- fprintf(stderr,
- "Cannot handle multiple microcode blocks - please use -C flag to collate them\n");
- return -EMLINK;
- }
-
- /*
- * Collect the microcode into a buffer, remove it from the device
- * tree and place it immediately above the (now smaller) device tree.
- */
- if (collate_ucode && count > 1) {
- ucode_buf = malloc(ucode_size);
- if (!ucode_buf) {
- fprintf(stderr,
- "Out of memory for microcode (%d bytes)\n",
- ucode_size);
- return -ENOMEM;
- }
- ret = scan_ucode(blob, ucode_buf, NULL, NULL, NULL);
- if (ret < 0)
- return ret;
-
- /* Remove the microcode from the device tree */
- ret = remove_ucode((char *)blob);
- if (ret < 0) {
- debug("Could not remove FDT microcode: %s\n",
- fdt_strerror(ret));
- return -EINVAL;
- }
- debug("Collated %d microcode block(s)\n", count);
- debug("Device tree reduced from %x to %x bytes\n",
- fdt_size, ret);
- fdt_size = ret;
-
- /*
- * Place microcode area immediately above the FDT, aligned
- * to a 16-byte boundary.
- */
- ucode_base = (char *)(((unsigned long)blob + fdt_size + 15) &
- ~15);
-
- data = ucode_base;
- data_size = ucode_size;
- memcpy(ucode_base, ucode_buf, ucode_size);
- free(ucode_buf);
- }
-
- offset = (uint32_t)(ucode_ptr + size);
- ptr = (void *)image + offset;
-
- ptr[0] = (data - image) - size;
- ptr[1] = data_size;
- debug("Wrote microcode pointer at %x: addr=%x, size=%x\n", ucode_ptr,
- ptr[0], ptr[1]);
-
- return (collate_ucode ? data + data_size : (char *)blob + fdt_size) -
- image;
-}
-
-/**
- * write_uboot() - Write U-Boot, device tree and microcode pointer
- *
- * This writes U-Boot into a place in the flash, followed by its device tree.
- * The microcode pointer is written so that U-Boot can find the microcode in
- * the device tree very early in boot.
- *
- * @image: Pointer to image
- * @size: Size of image in bytes
- * @uboot: Input file information for u-boot.bin
- * @fdt: Input file information for u-boot.dtb
- * @ucode_ptr: Address in U-Boot where the microcode pointer should be placed
- * @return 0 if OK, -ve on error
- */
-static int write_uboot(char *image, int size, struct input_file *uboot,
- struct input_file *fdt, unsigned int ucode_ptr,
- int collate_ucode, int *offset_uboot_top,
- int *offset_uboot_start)
-{
- int uboot_size, fdt_size;
- int uboot_top;
-
- uboot_size = write_data(image, size, uboot->addr, uboot->fname, 0, 0);
- if (uboot_size < 0)
- return uboot_size;
- fdt->addr = uboot->addr + uboot_size;
- debug("U-Boot size %#x, FDT at %#x\n", uboot_size, fdt->addr);
- fdt_size = write_data(image, size, fdt->addr, fdt->fname, 0, 0);
- if (fdt_size < 0)
- return fdt_size;
-
- uboot_top = (uint32_t)(fdt->addr + size) + fdt_size;
-
- if (ucode_ptr) {
- uboot_top = write_ucode(image, size, fdt, fdt_size, ucode_ptr,
- collate_ucode);
- if (uboot_top < 0)
- return uboot_top;
- }
-
- if (offset_uboot_top && offset_uboot_start) {
- *offset_uboot_top = uboot_top;
- *offset_uboot_start = (uint32_t)(uboot->addr + size);
- }
-
- return 0;
-}
-
static void print_version(void)
{
printf("ifdtool v%s -- ", IFDTOOL_VERSION);
@@ -1034,7 +814,7 @@
int mode_dump = 0, mode_extract = 0, mode_inject = 0;
int mode_spifreq = 0, mode_em100 = 0, mode_locked = 0;
int mode_unlocked = 0, mode_write = 0, mode_write_descriptor = 0;
- int create = 0, collate_ucode = 0;
+ int create = 0;
char *region_type_string = NULL, *inject_fname = NULL;
char *desc_fname = NULL, *addr_str = NULL;
int region_type = -1, inputfreq = 0;
@@ -1047,14 +827,12 @@
char *outfile = NULL;
struct stat buf;
int size = 0;
- unsigned int ucode_ptr = 0;
bool have_uboot = false;
int bios_fd;
char *image;
int ret;
static struct option long_options[] = {
{"create", 0, NULL, 'c'},
- {"collate-microcode", 0, NULL, 'C'},
{"dump", 0, NULL, 'd'},
{"descriptor", 1, NULL, 'D'},
{"em100", 0, NULL, 'e'},
@@ -1062,7 +840,6 @@
{"fdt", 1, NULL, 'f'},
{"inject", 1, NULL, 'i'},
{"lock", 0, NULL, 'l'},
- {"microcode", 1, NULL, 'm'},
{"romsize", 1, NULL, 'r'},
{"spifreq", 1, NULL, 's'},
{"unlock", 0, NULL, 'u'},
@@ -1073,15 +850,12 @@
{0, 0, 0, 0}
};
- while ((opt = getopt_long(argc, argv, "cCdD:ef:hi:lm:r:s:uU:vw:x?",
+ while ((opt = getopt_long(argc, argv, "cdD:ef:hi:lr:s:uU:vw:x?",
long_options, &option_index)) != EOF) {
switch (opt) {
case 'c':
create = 1;
break;
- case 'C':
- collate_ucode = 1;
- break;
case 'd':
mode_dump = 1;
break;
@@ -1119,9 +893,6 @@
case 'l':
mode_locked = 1;
break;
- case 'm':
- ucode_ptr = strtoul(optarg, NULL, 0);
- break;
case 'r':
rom_size = strtol(optarg, NULL, 0);
debug("ROM size %d\n", rom_size);
@@ -1166,12 +937,6 @@
exit(EXIT_FAILURE);
}
ifile->addr = strtoll(optarg, NULL, 0);
- ifile->type = opt == 'f' ? IF_fdt :
- opt == 'U' ? IF_uboot : IF_normal;
- if (ifile->type == IF_fdt)
- fdt = ifile;
- else if (ifile->type == IF_uboot)
- have_uboot = true;
wr_num++;
} else {
fprintf(stderr,
@@ -1302,18 +1067,9 @@
for (wr_idx = 0; wr_idx < wr_num; wr_idx++) {
ifile = &input_file[wr_idx];
- if (ifile->type == IF_fdt) {
- continue;
- } else if (ifile->type == IF_uboot) {
- ret = write_uboot(image, size, ifile, fdt,
- ucode_ptr, collate_ucode,
- &offset_uboot_top,
- &offset_uboot_start);
- } else {
- ret = write_data(image, size, ifile->addr,
- ifile->fname, offset_uboot_top,
- offset_uboot_start);
- }
+ ret = write_data(image, size, ifile->addr,
+ ifile->fname, offset_uboot_top,
+ offset_uboot_start);
if (ret < 0)
break;
}
diff --git a/tools/logos/engicam.bmp b/tools/logos/engicam.bmp
new file mode 100755
index 0000000..f6c60fb
--- /dev/null
+++ b/tools/logos/engicam.bmp
Binary files differ
diff --git a/tools/mxsimage.c b/tools/mxsimage.c
index 98fc644..32a7978 100644
--- a/tools/mxsimage.c
+++ b/tools/mxsimage.c
@@ -22,6 +22,36 @@
#include "pbl_crc32.h"
#include <image.h>
+/*
+ * OpenSSL 1.1.0 and newer compatibility functions:
+ * https://wiki.openssl.org/index.php/1.1_API_Changes
+ */
+#if OPENSSL_VERSION_NUMBER < 0x10100000L
+static void *OPENSSL_zalloc(size_t num)
+{
+ void *ret = OPENSSL_malloc(num);
+
+ if (ret != NULL)
+ memset(ret, 0, num);
+ return ret;
+}
+
+EVP_MD_CTX *EVP_MD_CTX_new(void)
+{
+ return OPENSSL_zalloc(sizeof(EVP_MD_CTX));
+}
+
+void EVP_MD_CTX_free(EVP_MD_CTX *ctx)
+{
+ EVP_MD_CTX_cleanup(ctx);
+ OPENSSL_free(ctx);
+}
+
+int EVP_CIPHER_CTX_reset(EVP_CIPHER_CTX *ctx)
+{
+ return EVP_CIPHER_CTX_cleanup(ctx);
+}
+#endif
/*
* DCD block
@@ -144,8 +174,8 @@
struct sb_dcd_ctx *dcd_head;
struct sb_dcd_ctx *dcd_tail;
- EVP_CIPHER_CTX cipher_ctx;
- EVP_MD_CTX md_ctx;
+ EVP_CIPHER_CTX *cipher_ctx;
+ EVP_MD_CTX *md_ctx;
uint8_t digest[32];
struct sb_key_dictionary_key sb_dict_key;
@@ -173,24 +203,26 @@
*/
static int sb_aes_init(struct sb_image_ctx *ictx, uint8_t *iv, int enc)
{
- EVP_CIPHER_CTX *ctx = &ictx->cipher_ctx;
+ EVP_CIPHER_CTX *ctx;
int ret;
/* If there is no init vector, init vector is all zeroes. */
if (!iv)
iv = ictx->image_key;
- EVP_CIPHER_CTX_init(ctx);
+ ctx = EVP_CIPHER_CTX_new();
ret = EVP_CipherInit(ctx, EVP_aes_128_cbc(), ictx->image_key, iv, enc);
- if (ret == 1)
+ if (ret == 1) {
EVP_CIPHER_CTX_set_padding(ctx, 0);
+ ictx->cipher_ctx = ctx;
+ }
return ret;
}
static int sb_aes_crypt(struct sb_image_ctx *ictx, uint8_t *in_data,
uint8_t *out_data, int in_len)
{
- EVP_CIPHER_CTX *ctx = &ictx->cipher_ctx;
+ EVP_CIPHER_CTX *ctx = ictx->cipher_ctx;
int ret, outlen;
uint8_t *outbuf;
@@ -215,13 +247,13 @@
static int sb_aes_deinit(EVP_CIPHER_CTX *ctx)
{
- return EVP_CIPHER_CTX_cleanup(ctx);
+ return EVP_CIPHER_CTX_reset(ctx);
}
static int sb_aes_reinit(struct sb_image_ctx *ictx, int enc)
{
int ret;
- EVP_CIPHER_CTX *ctx = &ictx->cipher_ctx;
+ EVP_CIPHER_CTX *ctx = ictx->cipher_ctx;
struct sb_boot_image_header *sb_header = &ictx->payload;
uint8_t *iv = sb_header->iv;
@@ -276,7 +308,7 @@
static void sb_encrypt_sb_header(struct sb_image_ctx *ictx)
{
- EVP_MD_CTX *md_ctx = &ictx->md_ctx;
+ EVP_MD_CTX *md_ctx = ictx->md_ctx;
struct sb_boot_image_header *sb_header = &ictx->payload;
uint8_t *sb_header_ptr = (uint8_t *)sb_header;
@@ -287,7 +319,7 @@
static void sb_encrypt_sb_sections_header(struct sb_image_ctx *ictx)
{
- EVP_MD_CTX *md_ctx = &ictx->md_ctx;
+ EVP_MD_CTX *md_ctx = ictx->md_ctx;
struct sb_section_ctx *sctx = ictx->sect_head;
struct sb_sections_header *shdr;
uint8_t *sb_sections_header_ptr;
@@ -307,7 +339,7 @@
static void sb_encrypt_key_dictionary_key(struct sb_image_ctx *ictx)
{
- EVP_MD_CTX *md_ctx = &ictx->md_ctx;
+ EVP_MD_CTX *md_ctx = ictx->md_ctx;
sb_aes_crypt(ictx, ictx->image_key, ictx->sb_dict_key.key,
sizeof(ictx->sb_dict_key.key));
@@ -316,7 +348,7 @@
static void sb_decrypt_key_dictionary_key(struct sb_image_ctx *ictx)
{
- EVP_MD_CTX *md_ctx = &ictx->md_ctx;
+ EVP_MD_CTX *md_ctx = ictx->md_ctx;
EVP_DigestUpdate(md_ctx, &ictx->sb_dict_key, sizeof(ictx->sb_dict_key));
sb_aes_crypt(ictx, ictx->sb_dict_key.key, ictx->image_key,
@@ -326,7 +358,7 @@
static void sb_encrypt_tag(struct sb_image_ctx *ictx,
struct sb_cmd_ctx *cctx)
{
- EVP_MD_CTX *md_ctx = &ictx->md_ctx;
+ EVP_MD_CTX *md_ctx = ictx->md_ctx;
struct sb_command *cmd = &cctx->payload;
sb_aes_crypt(ictx, (uint8_t *)cmd,
@@ -337,8 +369,8 @@
static int sb_encrypt_image(struct sb_image_ctx *ictx)
{
/* Start image-wide crypto. */
- EVP_MD_CTX_init(&ictx->md_ctx);
- EVP_DigestInit(&ictx->md_ctx, EVP_sha1());
+ ictx->md_ctx = EVP_MD_CTX_new();
+ EVP_DigestInit(ictx->md_ctx, EVP_sha1());
/*
* SB image header.
@@ -379,7 +411,7 @@
} else if (ccmd->header.tag == ROM_LOAD_CMD) {
sb_aes_crypt(ictx, cctx->data, cctx->data,
cctx->length);
- EVP_DigestUpdate(&ictx->md_ctx, cctx->data,
+ EVP_DigestUpdate(ictx->md_ctx, cctx->data,
cctx->length);
}
@@ -394,11 +426,12 @@
*/
sb_aes_reinit(ictx, 1);
- EVP_DigestFinal(&ictx->md_ctx, ictx->digest, NULL);
+ EVP_DigestFinal(ictx->md_ctx, ictx->digest, NULL);
+ EVP_MD_CTX_free(ictx->md_ctx);
sb_aes_crypt(ictx, ictx->digest, ictx->digest, sizeof(ictx->digest));
/* Stop the encryption session. */
- sb_aes_deinit(&ictx->cipher_ctx);
+ sb_aes_deinit(ictx->cipher_ctx);
return 0;
}
@@ -1322,7 +1355,7 @@
struct sb_boot_image_header *hdr = &ictx->payload;
struct sb_section_ctx *sctx = ictx->sect_head;
uint32_t kd_size, sections_blocks;
- EVP_MD_CTX md_ctx;
+ EVP_MD_CTX *md_ctx;
/* The main SB header size in blocks. */
hdr->image_blocks = hdr->header_blocks;
@@ -1359,13 +1392,14 @@
hdr->key_dictionary_block + kd_size / SB_BLOCK_SIZE;
/* Compute header digest. */
- EVP_MD_CTX_init(&md_ctx);
+ md_ctx = EVP_MD_CTX_new();
- EVP_DigestInit(&md_ctx, EVP_sha1());
- EVP_DigestUpdate(&md_ctx, hdr->signature1,
+ EVP_DigestInit(md_ctx, EVP_sha1());
+ EVP_DigestUpdate(md_ctx, hdr->signature1,
sizeof(struct sb_boot_image_header) -
sizeof(hdr->digest));
- EVP_DigestFinal(&md_ctx, hdr->digest, NULL);
+ EVP_DigestFinal(md_ctx, hdr->digest, NULL);
+ EVP_MD_CTX_free(md_ctx);
return 0;
}
@@ -1621,12 +1655,12 @@
struct tm tm;
int sz, ret = 0;
unsigned char digest[20];
- EVP_MD_CTX md_ctx;
+ EVP_MD_CTX *md_ctx;
unsigned long size;
/* Start image-wide crypto. */
- EVP_MD_CTX_init(&ictx->md_ctx);
- EVP_DigestInit(&ictx->md_ctx, EVP_sha1());
+ ictx->md_ctx = EVP_MD_CTX_new();
+ EVP_DigestInit(ictx->md_ctx, EVP_sha1());
soprintf(ictx, "---------- Verifying SB Image Header ----------\n");
@@ -1637,12 +1671,13 @@
}
/* Compute header digest. */
- EVP_MD_CTX_init(&md_ctx);
- EVP_DigestInit(&md_ctx, EVP_sha1());
- EVP_DigestUpdate(&md_ctx, hdr->signature1,
+ md_ctx = EVP_MD_CTX_new();
+ EVP_DigestInit(md_ctx, EVP_sha1());
+ EVP_DigestUpdate(md_ctx, hdr->signature1,
sizeof(struct sb_boot_image_header) -
sizeof(hdr->digest));
- EVP_DigestFinal(&md_ctx, digest, NULL);
+ EVP_DigestFinal(md_ctx, digest, NULL);
+ EVP_MD_CTX_free(md_ctx);
sb_aes_init(ictx, NULL, 1);
sb_encrypt_sb_header(ictx);
@@ -1761,7 +1796,7 @@
static void sb_decrypt_tag(struct sb_image_ctx *ictx,
struct sb_cmd_ctx *cctx)
{
- EVP_MD_CTX *md_ctx = &ictx->md_ctx;
+ EVP_MD_CTX *md_ctx = ictx->md_ctx;
struct sb_command *cmd = &cctx->payload;
sb_aes_crypt(ictx, (uint8_t *)&cctx->c_payload,
@@ -1818,7 +1853,7 @@
*tsize += size;
- EVP_DigestUpdate(&ictx->md_ctx, cctx->data, asize);
+ EVP_DigestUpdate(ictx->md_ctx, cctx->data, asize);
sb_aes_crypt(ictx, cctx->data, cctx->data, asize);
if (ccmd->load.crc32 != pbl_crc32(0,
@@ -2007,7 +2042,8 @@
}
/* Check the image digest. */
- EVP_DigestFinal(&ictx->md_ctx, ictx->digest, NULL);
+ EVP_DigestFinal(ictx->md_ctx, ictx->digest, NULL);
+ EVP_MD_CTX_free(ictx->md_ctx);
/* Decrypt the image digest from the input image. */
sb_aes_reinit(ictx, 0);
@@ -2083,7 +2119,7 @@
soprintf(ictx, "Verification %s\n", ret ? "FAILED" : "PASSED");
/* Stop the encryption session. */
- sb_aes_deinit(&ictx->cipher_ctx);
+ sb_aes_deinit(ictx->cipher_ctx);
fclose(fp);
return ret;
