ARM: dts: uniphier: sync DT with Linux 4.17-rc1
Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>
diff --git a/arch/arm/dts/uniphier-ld20-global.dts b/arch/arm/dts/uniphier-ld20-global.dts
index fc2bc9d..fe6608e 100644
--- a/arch/arm/dts/uniphier-ld20-global.dts
+++ b/arch/arm/dts/uniphier-ld20-global.dts
@@ -1,14 +1,13 @@
-/*
- * Device Tree Source for UniPhier LD20 Global Board
- *
- * Copyright (C) 2015-2017 Socionext Inc.
- * Author: Masahiro Yamada <yamada.masahiro@socionext.com>
- * Kunihiko Hayashi <hayashi.kunihiko@socionext.com>
- *
- * SPDX-License-Identifier: (GPL-2.0+ OR MIT)
- */
+// SPDX-License-Identifier: GPL-2.0+ OR MIT
+//
+// Device Tree Source for UniPhier LD20 Global Board
+//
+// Copyright (C) 2015-2017 Socionext Inc.
+// Author: Masahiro Yamada <yamada.masahiro@socionext.com>
+// Kunihiko Hayashi <hayashi.kunihiko@socionext.com>
/dts-v1/;
+#include <dt-bindings/gpio/uniphier-gpio.h>
#include "uniphier-ld20.dtsi"
/ {
@@ -37,6 +36,53 @@
device_type = "memory";
reg = <0 0x80000000 0 0xc0000000>;
};
+
+ dvdd_reg: reg-fixed {
+ compatible = "regulator-fixed";
+ regulator-name = "DVDD";
+ regulator-min-microvolt = <3300000>;
+ regulator-max-microvolt = <3300000>;
+ };
+
+ amp_vcc_reg: reg-fixed {
+ compatible = "regulator-fixed";
+ regulator-name = "AMP_VCC";
+ regulator-min-microvolt = <12000000>;
+ regulator-max-microvolt = <12000000>;
+ };
+
+ sound {
+ compatible = "audio-graph-card";
+ label = "UniPhier LD20";
+ widgets = "Headphone", "Headphone Jack";
+ dais = <&i2s_port2
+ &i2s_port3
+ &i2s_port4
+ &spdif_port0
+ &comp_spdif_port0>;
+ };
+
+ spdif-out {
+ compatible = "linux,spdif-dit";
+ #sound-dai-cells = <0>;
+
+ port@0 {
+ spdif_tx: endpoint {
+ remote-endpoint = <&spdif_hiecout1>;
+ };
+ };
+ };
+
+ comp-spdif-out {
+ compatible = "linux,spdif-dit";
+ #sound-dai-cells = <0>;
+
+ port@0 {
+ comp_spdif_tx: endpoint {
+ remote-endpoint = <&comp_spdif_hiecout1>;
+ };
+ };
+ };
};
&serial0 {
@@ -47,8 +93,55 @@
status = "okay";
};
+&i2s_hpcmout1 {
+ dai-format = "i2s";
+ remote-endpoint = <&tas_speaker>;
+};
+
+&spdif_hiecout1 {
+ remote-endpoint = <&spdif_tx>;
+};
+
+&comp_spdif_hiecout1 {
+ remote-endpoint = <&comp_spdif_tx>;
+};
+
&i2c0 {
status = "okay";
+
+ tas5707@1b {
+ compatible = "ti,tas5711";
+ reg = <0x1b>;
+ reset-gpios = <&gpio UNIPHIER_GPIO_PORT(0, 0) GPIO_ACTIVE_LOW>;
+ pdn-gpios = <&gpio UNIPHIER_GPIO_PORT(0, 1) GPIO_ACTIVE_LOW>;
+ #sound-dai-cells = <0>;
+ AVDD-supply = <&dvdd_reg>;
+ DVDD-supply = <&dvdd_reg>;
+ PVDD_A-supply = <&_vcc_reg>;
+ PVDD_B-supply = <&_vcc_reg>;
+ PVDD_C-supply = <&_vcc_reg>;
+ PVDD_D-supply = <&_vcc_reg>;
+
+ port@0 {
+ tas_speaker: endpoint {
+ dai-format = "i2s";
+ remote-endpoint = <&i2s_hpcmout1>;
+ };
+ };
+ };
+};
+
+ð {
+ status = "okay";
+ phy-mode = "rmii";
+ pinctrl-0 = <&pinctrl_ether_rmii>;
+ phy-handle = <ðphy>;
+};
+
+&mdio {
+ ethphy: ethphy@1 {
+ reg = <1>;
+ };
};
&nand {