hisilicon: hi6220: Add a hi6220 pinmux driver.
This patch adds basic pinmux support for the hi6220 SoC,
which is found on the hikey board.
Signed-off-by: Peter Griffin <peter.griffin@linaro.org>
diff --git a/arch/arm/cpu/armv8/Makefile b/arch/arm/cpu/armv8/Makefile
index 6466ebb..adb11b3 100644
--- a/arch/arm/cpu/armv8/Makefile
+++ b/arch/arm/cpu/armv8/Makefile
@@ -17,3 +17,4 @@
obj-$(CONFIG_FSL_LSCH3) += fsl-lsch3/
obj-$(CONFIG_ARCH_ZYNQMP) += zynqmp/
+obj-$(CONFIG_TARGET_HIKEY) += hisilicon/
diff --git a/arch/arm/cpu/armv8/hisilicon/Makefile b/arch/arm/cpu/armv8/hisilicon/Makefile
new file mode 100644
index 0000000..2c9aefe
--- /dev/null
+++ b/arch/arm/cpu/armv8/hisilicon/Makefile
@@ -0,0 +1,8 @@
+#
+# (C) Copyright 2015 Linaro
+# Peter Griffin <peter.griffin@linaro.org>
+#
+# SPDX-License-Identifier: GPL-2.0+
+#
+
+obj-y += pinmux.o
diff --git a/arch/arm/cpu/armv8/hisilicon/pinmux.c b/arch/arm/cpu/armv8/hisilicon/pinmux.c
new file mode 100644
index 0000000..3e4c9ce
--- /dev/null
+++ b/arch/arm/cpu/armv8/hisilicon/pinmux.c
@@ -0,0 +1,184 @@
+/*
+ * Copyright (C) 2015 Linaro.
+ * Peter Griffin <peter.griffin@linaro.org>
+ *
+ * SPDX-License-Identifier: GPL-2.0+
+ */
+
+#include <common.h>
+#include <fdtdec.h>
+#include <asm/gpio.h>
+#include <asm/io.h>
+#include <asm/arch/pinmux.h>
+
+struct hi6220_pinmux0_regs *pmx0 =
+ (struct hi6220_pinmux0_regs *)HI6220_PINMUX0_BASE;
+
+struct hi6220_pinmux1_regs *pmx1 =
+ (struct hi6220_pinmux1_regs *)HI6220_PINMUX1_BASE;
+
+static void hi6220_uart_config(int peripheral)
+{
+ switch (peripheral) {
+ case PERIPH_ID_UART0:
+ writel(MUX_M0, &pmx0->iomg[48]); /* UART0_RXD */
+ writel(MUX_M0, &pmx0->iomg[49]); /* UART0_TXD */
+
+ writel(DRIVE1_02MA | PULL_UP, &pmx1->iocfg[49]); /* UART0_RXD */
+ writel(DRIVE1_02MA | PULL_UP, &pmx1->iocfg[50]); /* UART0_TXD */
+ break;
+
+ case PERIPH_ID_UART1:
+ writel(MUX_M0, &pmx0->iomg[50]); /* UART1_CTS_N */
+ writel(MUX_M0, &pmx0->iomg[51]); /* UART1_RTS_N */
+ writel(MUX_M0, &pmx0->iomg[52]); /* UART1_RXD */
+ writel(MUX_M0, &pmx0->iomg[53]); /* UART1_TXD */
+
+ writel(DRIVE1_02MA | PULL_UP, &pmx1->iocfg[51]); /*UART1_CTS_N*/
+ writel(DRIVE1_02MA | PULL_UP, &pmx1->iocfg[53]); /* UART1_RXD */
+ writel(DRIVE1_02MA, &pmx1->iocfg[52]); /* UART1_RTS_N */
+ writel(DRIVE1_02MA, &pmx1->iocfg[54]); /* UART1_TXD */
+ break;
+
+ case PERIPH_ID_UART2:
+ writel(MUX_M0, &pmx0->iomg[54]); /* UART2_CTS_N */
+ writel(MUX_M0, &pmx0->iomg[55]); /* UART2_RTS_N */
+ writel(MUX_M0, &pmx0->iomg[56]); /* UART2_RXD */
+ writel(MUX_M0, &pmx0->iomg[57]); /* UART2_TXD */
+
+ writel(DRIVE1_02MA, &pmx1->iocfg[55]); /* UART2_CTS_N */
+ writel(DRIVE1_02MA, &pmx1->iocfg[56]); /* UART2_RTS_N */
+ writel(DRIVE1_02MA, &pmx1->iocfg[57]); /* UART2_RXD */
+ writel(DRIVE1_02MA, &pmx1->iocfg[58]); /* UART2_TXD */
+ break;
+
+ case PERIPH_ID_UART3:
+ writel(MUX_M1, &pmx0->iomg[96]); /* UART3_CTS_N */
+ writel(MUX_M1, &pmx0->iomg[97]); /* UART3_RTS_N */
+ writel(MUX_M1, &pmx0->iomg[98]); /* UART3_RXD */
+ writel(MUX_M1, &pmx0->iomg[99]); /* UART3_TXD */
+
+ /* UART3_TXD */
+ writel(DRIVE1_02MA | PULL_DOWN, &pmx1->iocfg[100]);
+ /* UART3_RTS_N */
+ writel(DRIVE1_02MA | PULL_DOWN, &pmx1->iocfg[101]);
+ /* UART3_RXD */
+ writel(DRIVE1_02MA | PULL_DOWN, &pmx1->iocfg[102]);
+ /* UART3_TXD */
+ writel(DRIVE1_02MA | PULL_DOWN, &pmx1->iocfg[103]);
+ break;
+
+ case PERIPH_ID_UART4:
+ writel(MUX_M1, &pmx0->iomg[116]); /* UART4_CTS_N */
+ writel(MUX_M1, &pmx0->iomg[117]); /* UART4_RTS_N */
+ writel(MUX_M1, &pmx0->iomg[118]); /* UART4_RXD */
+ writel(MUX_M1, &pmx0->iomg[119]); /* UART4_TXD */
+
+ /* UART4_CTS_N */
+ writel(DRIVE1_02MA | PULL_DOWN, &pmx1->iocfg[120]);
+ /* UART4_RTS_N */
+ writel(DRIVE1_02MA | PULL_DOWN, &pmx1->iocfg[121]);
+ /* UART4_RXD */
+ writel(DRIVE1_02MA | PULL_DOWN, &pmx1->iocfg[122]);
+ /* UART4_TXD */
+ writel(DRIVE1_02MA | PULL_DOWN, &pmx1->iocfg[123]);
+ break;
+ case PERIPH_ID_UART5:
+ writel(MUX_M1, &pmx0->iomg[114]); /* UART5_RXD */
+ writel(MUX_M1, &pmx0->iomg[115]); /* UART5_TXD */
+
+ /* UART5_RXD */
+ writel(DRIVE1_02MA | PULL_DOWN, &pmx1->iocfg[118]);
+ /* UART5_TXD */
+ writel(DRIVE1_02MA | PULL_DOWN, &pmx1->iocfg[119]);
+
+ break;
+
+ default:
+ debug("%s: invalid peripheral %d", __func__, peripheral);
+ return;
+ }
+}
+
+static int hi6220_mmc_config(int peripheral)
+{
+ u32 tmp;
+
+ switch (peripheral) {
+ case PERIPH_ID_SDMMC0:
+
+ /* eMMC pinmux config */
+ writel(MUX_M0, &pmx0->iomg[64]); /* EMMC_CLK */
+ writel(MUX_M0, &pmx0->iomg[65]); /* EMMC_CMD */
+ writel(MUX_M0, &pmx0->iomg[66]); /* EMMC_DATA0 */
+ writel(MUX_M0, &pmx0->iomg[67]); /* EMMC_DATA1 */
+ writel(MUX_M0, &pmx0->iomg[68]); /* EMMC_DATA2 */
+ writel(MUX_M0, &pmx0->iomg[69]); /* EMMC_DATA3 */
+ writel(MUX_M0, &pmx0->iomg[70]); /* EMMC_DATA4 */
+ writel(MUX_M0, &pmx0->iomg[71]); /* EMMC_DATA5 */
+ writel(MUX_M0, &pmx0->iomg[72]); /* EMMC_DATA6 */
+ writel(MUX_M0, &pmx0->iomg[73]); /* EMMC_DATA7 */
+
+ /*eMMC configure up/down/drive */
+ writel(DRIVE1_08MA, &pmx1->iocfg[65]); /* EMMC_CLK */
+
+ tmp = DRIVE1_04MA | PULL_UP;
+ writel(tmp, &pmx1->iocfg[65]); /* EMMC_CMD */
+ writel(tmp, &pmx1->iocfg[66]); /* EMMC_DATA0 */
+ writel(tmp, &pmx1->iocfg[67]); /* EMMC_DATA1 */
+ writel(tmp, &pmx1->iocfg[68]); /* EMMC_DATA2 */
+ writel(tmp, &pmx1->iocfg[69]); /* EMMC_DATA3 */
+ writel(tmp, &pmx1->iocfg[70]); /* EMMC_DATA4 */
+ writel(tmp, &pmx1->iocfg[71]); /* EMMC_DATA5 */
+ writel(tmp, &pmx1->iocfg[72]); /* EMMC_DATA6 */
+ writel(tmp, &pmx1->iocfg[73]); /* EMMC_DATA7 */
+
+ writel(DRIVE1_04MA, &pmx1->iocfg[73]); /* EMMC_RST_N */
+ break;
+
+ case PERIPH_ID_SDMMC1:
+
+ writel(MUX_M0, &pmx0->iomg[3]); /* SD_CLK */
+ writel(MUX_M0, &pmx0->iomg[4]); /* SD_CMD */
+ writel(MUX_M0, &pmx0->iomg[5]); /* SD_DATA0 */
+ writel(MUX_M0, &pmx0->iomg[6]); /* SD_DATA1 */
+ writel(MUX_M0, &pmx0->iomg[7]); /* SD_DATA2 */
+ writel(MUX_M0, &pmx0->iomg[8]); /* SD_DATA3 */
+
+ writel(DRIVE1_10MA | BIT(2), &pmx1->iocfg[3]); /*SD_CLK*/
+ writel(DRIVE1_08MA | BIT(2), &pmx1->iocfg[4]); /*SD_CMD*/
+ writel(DRIVE1_08MA | BIT(2), &pmx1->iocfg[5]); /*SD_DATA0*/
+ writel(DRIVE1_08MA | BIT(2), &pmx1->iocfg[6]); /*SD_DATA1*/
+ writel(DRIVE1_08MA | BIT(2), &pmx1->iocfg[7]); /*SD_DATA2*/
+ writel(DRIVE1_08MA | BIT(2), &pmx1->iocfg[8]); /*SD_DATA3*/
+ break;
+
+ default:
+ debug("%s: invalid peripheral %d", __func__, peripheral);
+ return -1;
+ }
+
+ return 0;
+}
+
+int hi6220_pinmux_config(int peripheral)
+{
+ switch (peripheral) {
+ case PERIPH_ID_UART0:
+ case PERIPH_ID_UART1:
+ case PERIPH_ID_UART2:
+ case PERIPH_ID_UART3:
+ hi6220_uart_config(peripheral);
+ break;
+ case PERIPH_ID_SDMMC0:
+ case PERIPH_ID_SDMMC1:
+ return hi6220_mmc_config(peripheral);
+ default:
+ debug("%s: invalid peripheral %d", __func__, peripheral);
+ return -1;
+ }
+
+ return 0;
+}
+
+
diff --git a/arch/arm/include/asm/arch-hi6220/periph.h b/arch/arm/include/asm/arch-hi6220/periph.h
new file mode 100644
index 0000000..7155f60
--- /dev/null
+++ b/arch/arm/include/asm/arch-hi6220/periph.h
@@ -0,0 +1,30 @@
+/*
+ * Copyright (C) 2015 Linaro
+ * Peter Griffin <peter.griffin@linaro.org>
+ *
+ * SPDX-License-Identifier: GPL-2.0+
+ */
+
+#ifndef __ASM_ARM_ARCH_PERIPH_H
+#define __ASM_ARM_ARCH_PERIPH_H
+
+/*
+ * Peripherals required for pinmux configuration. List will
+ * grow with support for more devices getting added.
+ * Numbering based on interrupt table.
+ *
+ */
+enum periph_id {
+ PERIPH_ID_UART0 = 36,
+ PERIPH_ID_UART1,
+ PERIPH_ID_UART2,
+ PERIPH_ID_UART3,
+ PERIPH_ID_UART4,
+ PERIPH_ID_UART5,
+ PERIPH_ID_SDMMC0 = 72,
+ PERIPH_ID_SDMMC1,
+
+ PERIPH_ID_NONE = -1,
+};
+
+#endif /* __ASM_ARM_ARCH_PERIPH_H */
diff --git a/arch/arm/include/asm/arch-hi6220/pinmux.h b/arch/arm/include/asm/arch-hi6220/pinmux.h
new file mode 100644
index 0000000..1dd5f9b
--- /dev/null
+++ b/arch/arm/include/asm/arch-hi6220/pinmux.h
@@ -0,0 +1,82 @@
+/*
+ * Copyright (C) 2015 Linaro
+ * Peter Griffin <peter.griffin@linaro.org>
+ *
+ * SPDX-License-Identifier: GPL-2.0+
+ */
+
+#ifndef __ASM_ARM_ARCH_PINMUX_H
+#define __ASM_ARM_ARCH_PINMUX_H
+
+#include "periph.h"
+
+
+/* iomg bit definition */
+#define MUX_M0 0
+#define MUX_M1 1
+#define MUX_M2 2
+#define MUX_M3 3
+#define MUX_M4 4
+#define MUX_M5 5
+#define MUX_M6 6
+#define MUX_M7 7
+
+/* iocg bit definition */
+#define PULL_MASK (3)
+#define PULL_DIS (0)
+#define PULL_UP (1 << 0)
+#define PULL_DOWN (1 << 1)
+
+/* drive strength definition */
+#define DRIVE_MASK (7 << 4)
+#define DRIVE1_02MA (0 << 4)
+#define DRIVE1_04MA (1 << 4)
+#define DRIVE1_08MA (2 << 4)
+#define DRIVE1_10MA (3 << 4)
+#define DRIVE2_02MA (0 << 4)
+#define DRIVE2_04MA (1 << 4)
+#define DRIVE2_08MA (2 << 4)
+#define DRIVE2_10MA (3 << 4)
+#define DRIVE3_04MA (0 << 4)
+#define DRIVE3_08MA (1 << 4)
+#define DRIVE3_12MA (2 << 4)
+#define DRIVE3_16MA (3 << 4)
+#define DRIVE3_20MA (4 << 4)
+#define DRIVE3_24MA (5 << 4)
+#define DRIVE3_32MA (6 << 4)
+#define DRIVE3_40MA (7 << 4)
+#define DRIVE4_02MA (0 << 4)
+#define DRIVE4_04MA (2 << 4)
+#define DRIVE4_08MA (4 << 4)
+#define DRIVE4_10MA (6 << 4)
+
+#define HI6220_PINMUX0_BASE 0xf7010000
+#define HI6220_PINMUX1_BASE 0xf7010800
+
+#ifndef __ASSEMBLY__
+
+/* maybe more registers, but highest used is 123 */
+#define REG_NUM 123
+
+struct hi6220_pinmux0_regs {
+ uint32_t iomg[REG_NUM];
+};
+
+struct hi6220_pinmux1_regs {
+ uint32_t iocfg[REG_NUM];
+};
+
+#endif
+
+/**
+ * Configures the pinmux for a particular peripheral.
+ *
+ * This function will configure the peripheral pinmux along with
+ * pull-up/down and drive strength.
+ *
+ * @param peripheral peripheral to be configured
+ * @return 0 if ok, -1 on error (e.g. unsupported peripheral)
+ */
+int hi6220_pinmux_config(int peripheral);
+
+#endif