Merge branch 'master' of git://git.denx.de/u-boot-usb
diff --git a/MAINTAINERS b/MAINTAINERS
index b24ba19..2fc81cf 100644
--- a/MAINTAINERS
+++ b/MAINTAINERS
@@ -1202,6 +1202,7 @@
 Yoshihiro Shimoda <yoshihiro.shimoda.uh@renesas.com>
 
 	MS7720SE	SH7720
+	R0P77520000RZ	SH7752
 	R0P77570030RL	SH7757
 	R0P77850011RL	SH7785
 
diff --git a/README b/README
index b5c1c03..1d2e129 100644
--- a/README
+++ b/README
@@ -2390,6 +2390,11 @@
 		CONFIG_SF_DEFAULT_MODE 		(see include/spi.h)
 		CONFIG_SF_DEFAULT_SPEED		in Hz
 
+		CONFIG_CMD_SF_TEST
+
+		Define this option to include a destructive SPI flash
+		test ('sf test').
+
 - SystemACE Support:
 		CONFIG_SYSTEMACE
 
@@ -2975,9 +2980,6 @@
 		non page size aligned address and this could cause major
 		problems.
 
-- CONFIG_SYS_TFTP_LOADADDR:
-		Default load address for network file downloads
-
 - CONFIG_SYS_LOADS_BAUD_CHANGE:
 		Enable temporary baudrate change while serial download
 
diff --git a/arch/sh/include/asm/cpu_sh4.h b/arch/sh/include/asm/cpu_sh4.h
index f1f49fe..af5c56f 100644
--- a/arch/sh/include/asm/cpu_sh4.h
+++ b/arch/sh/include/asm/cpu_sh4.h
@@ -48,6 +48,8 @@
 # include <asm/cpu_sh7724.h>
 #elif defined (CONFIG_CPU_SH7734)
 # include <asm/cpu_sh7734.h>
+#elif defined (CONFIG_CPU_SH7752)
+# include <asm/cpu_sh7752.h>
 #elif defined (CONFIG_CPU_SH7757)
 # include <asm/cpu_sh7757.h>
 #elif defined (CONFIG_CPU_SH7763)
diff --git a/arch/sh/include/asm/cpu_sh7752.h b/arch/sh/include/asm/cpu_sh7752.h
new file mode 100644
index 0000000..f0ad0e8
--- /dev/null
+++ b/arch/sh/include/asm/cpu_sh7752.h
@@ -0,0 +1,211 @@
+/*
+ * Copyright (C) 2012  Renesas Solutions Corp.
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of
+ * the License, or (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
+ * MA 02111-1307 USA
+ *
+ */
+
+#ifndef _ASM_CPU_SH7752_H_
+#define _ASM_CPU_SH7752_H_
+
+#define CCR		0xFF00001C
+#define WTCNT		0xFFCC0000
+#define CCR_CACHE_INIT	0x0000090b
+#define CACHE_OC_NUM_WAYS	1
+
+#ifndef __ASSEMBLY__		/* put C only stuff in this section */
+/* MMU */
+struct mmu_regs {
+	unsigned int	reserved[4];
+	unsigned int	mmucr;
+};
+#define MMU_BASE	((struct mmu_regs *)0xff000000)
+
+/* Watchdog */
+#define WTCSR0		0xffcc0002
+#define WRSTCSR_R	0xffcc0003
+#define WRSTCSR_W	0xffcc0002
+#define WTCSR_PREFIX		0xa500
+#define WRSTCSR_PREFIX		0x6900
+#define WRSTCSR_WOVF_PREFIX	0x9600
+
+/* SCIF */
+#define SCIF0_BASE	0xfe4b0000	/* The real name is SCIF2 */
+#define SCIF1_BASE	0xfe4c0000	/* The real name is SCIF3 */
+#define SCIF2_BASE	0xfe4d0000	/* The real name is SCIF4 */
+
+/* TMU0 */
+#define TMU_BASE	 0xFE430000
+
+/* ETHER, GETHER MAC address */
+struct ether_mac_regs {
+	unsigned int	reserved[114];
+	unsigned int	mahr;
+	unsigned int	reserved2;
+	unsigned int	malr;
+};
+#define GETHER0_MAC_BASE	((struct ether_mac_regs *)0xfee0400)
+#define GETHER1_MAC_BASE	((struct ether_mac_regs *)0xfee0c00)
+#define ETHER0_MAC_BASE		((struct ether_mac_regs *)0xfef0000)
+#define ETHER1_MAC_BASE		((struct ether_mac_regs *)0xfef0800)
+
+/* GETHER */
+struct gether_control_regs {
+	unsigned int	gbecont;
+};
+#define GETHER_CONTROL_BASE	((struct gether_control_regs *)0xffc10100)
+#define GBECONT_RMII1		0x00020000
+#define GBECONT_RMII0		0x00010000
+
+/* SerMux */
+struct sermux_regs {
+	unsigned char	smr0;
+	unsigned char	smr1;
+	unsigned char	smr2;
+	unsigned char	smr3;
+	unsigned char	smr4;
+	unsigned char	smr5;
+};
+#define SERMUX_BASE	((struct sermux_regs *)0xfe470000)
+
+
+/* USB0/1 */
+struct usb_common_regs {
+	unsigned short	reserved[129];
+	unsigned short	suspmode;
+};
+#define USB0_COMMON_BASE	((struct usb_common_regs *)0xfe450000)
+#define USB1_COMMON_BASE	((struct usb_common_regs *)0xfe4f0000)
+
+struct usb0_phy_regs {
+	unsigned short	reset;
+	unsigned short	reserved[4];
+	unsigned short	portsel;
+};
+#define USB0_PHY_BASE		((struct usb0_phy_regs *)0xfe5f0000)
+
+struct usb1_port_regs {
+	unsigned int	port1sel;
+	unsigned int	reserved;
+	unsigned int	usb1intsts;
+};
+#define USB1_PORT_BASE		((struct usb1_port_regs *)0xfe4f2000)
+
+struct usb1_alignment_regs {
+	unsigned int	ehcidatac;	/* 0xfe4fe018 */
+	unsigned int	reserved[63];
+	unsigned int	ohcidatac;
+};
+#define USB1_ALIGNMENT_BASE	((struct usb1_alignment_regs *)0xfe4fe018)
+
+/* GPIO */
+struct gpio_regs {
+	unsigned short	pacr;
+	unsigned short	pbcr;
+	unsigned short	pccr;
+	unsigned short	pdcr;
+	unsigned short	pecr;
+	unsigned short	pfcr;
+	unsigned short	pgcr;
+	unsigned short	phcr;
+	unsigned short	picr;
+	unsigned short	pjcr;
+	unsigned short	pkcr;
+	unsigned short	plcr;
+	unsigned short	pmcr;
+	unsigned short	pncr;
+	unsigned short	pocr;
+	unsigned short	reserved;
+	unsigned short	pqcr;
+	unsigned short	prcr;
+	unsigned short	pscr;
+	unsigned short	ptcr;
+	unsigned short	pucr;
+	unsigned short	pvcr;
+	unsigned short	pwcr;
+	unsigned short	pxcr;
+	unsigned short	pycr;
+	unsigned short	pzcr;
+	unsigned char	padr;
+	unsigned char	reserved_a;
+	unsigned char	pbdr;
+	unsigned char	reserved_b;
+	unsigned char	pcdr;
+	unsigned char	reserved_c;
+	unsigned char	pddr;
+	unsigned char	reserved_d;
+	unsigned char	pedr;
+	unsigned char	reserved_e;
+	unsigned char	pfdr;
+	unsigned char	reserved_f;
+	unsigned char	pgdr;
+	unsigned char	reserved_g;
+	unsigned char	phdr;
+	unsigned char	reserved_h;
+	unsigned char	pidr;
+	unsigned char	reserved_i;
+	unsigned char	pjdr;
+	unsigned char	reserved_j;
+	unsigned char	pkdr;
+	unsigned char	reserved_k;
+	unsigned char	pldr;
+	unsigned char	reserved_l;
+	unsigned char	pmdr;
+	unsigned char	reserved_m;
+	unsigned char	pndr;
+	unsigned char	reserved_n;
+	unsigned char	podr;
+	unsigned char	reserved_o;
+	unsigned char	ppdr;
+	unsigned char	reserved_p;
+	unsigned char	pqdr;
+	unsigned char	reserved_q;
+	unsigned char	prdr;
+	unsigned char	reserved_r;
+	unsigned char	psdr;
+	unsigned char	reserved_s;
+	unsigned char	ptdr;
+	unsigned char	reserved_t;
+	unsigned char	pudr;
+	unsigned char	reserved_u;
+	unsigned char	pvdr;
+	unsigned char	reserved_v;
+	unsigned char	pwdr;
+	unsigned char	reserved_w;
+	unsigned char	pxdr;
+	unsigned char	reserved_x;
+	unsigned char	pydr;
+	unsigned char	reserved_y;
+	unsigned char	pzdr;
+	unsigned char	reserved_z;
+	unsigned short	ncer;
+	unsigned short	ncmcr;
+	unsigned short	nccsr;
+	unsigned char	reserved2[2];
+	unsigned short	psel0;		/* +0x70 */
+	unsigned short	psel1;
+	unsigned short	psel2;
+	unsigned short	psel3;
+	unsigned short	psel4;
+	unsigned short	psel5;
+	unsigned short	psel6;
+	unsigned short	reserved3[2];
+	unsigned short	psel7;
+};
+#define GPIO_BASE	((struct gpio_regs *)0xffec0000)
+
+#endif	/* ifndef __ASSEMBLY__ */
+#endif	/* _ASM_CPU_SH7752_H_ */
diff --git a/board/renesas/sh7752evb/Makefile b/board/renesas/sh7752evb/Makefile
new file mode 100644
index 0000000..196c992
--- /dev/null
+++ b/board/renesas/sh7752evb/Makefile
@@ -0,0 +1,36 @@
+#
+# Copyright (C) 2012  Yoshihiro Shimoda <yoshihiro.shimoda.uh@renesas.com>
+#
+# This program is free software; you can redistribute it and/or
+# modify it under the terms of the GNU General Public License as
+# published by the Free Software Foundation; either version 2 of
+# the License, or (at your option) any later version.
+#
+# This program is distributed in the hope that it will be useful,
+# but WITHOUT ANY WARRANTY; without even the implied warranty of
+# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+# GNU General Public License for more details.
+#
+# You should have received a copy of the GNU General Public License
+# along with this program; if not, write to the Free Software
+# Foundation, Inc., 59 Temple Place, Suite 330, Boston,
+# MA 02111-1307 USA
+
+include $(TOPDIR)/config.mk
+
+LIB	= $(obj)lib$(BOARD).o
+
+COBJS	:= sh7752evb.o spi-boot.o
+SOBJS	:= lowlevel_init.o
+
+$(LIB):	$(obj).depend $(COBJS) $(SOBJS)
+	$(call cmd_link_o_target, $(COBJS) $(SOBJS))
+
+#########################################################################
+
+# defines $(obj).depend target
+include $(SRCTREE)/rules.mk
+
+sinclude $(obj).depend
+
+#########################################################################
diff --git a/board/renesas/sh7752evb/lowlevel_init.S b/board/renesas/sh7752evb/lowlevel_init.S
new file mode 100644
index 0000000..73c8ac4
--- /dev/null
+++ b/board/renesas/sh7752evb/lowlevel_init.S
@@ -0,0 +1,460 @@
+/*
+ * Copyright (C) 2012  Renesas Solutions Corp.
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of
+ * the License, or (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
+ * MA 02111-1307 USA
+ */
+
+#include <config.h>
+#include <version.h>
+#include <asm/processor.h>
+#include <asm/macro.h>
+
+.macro	or32, addr, data
+	mov.l \addr, r1
+	mov.l \data, r0
+	mov.l @r1, r2
+	or    r2, r0
+	mov.l r0, @r1
+.endm
+
+.macro	wait_DBCMD
+	mov.l	DBWAIT_A, r0
+	mov.l	@r0, r1
+.endm
+
+	.global lowlevel_init
+	.section	.spiboot1.text
+	.align  2
+
+lowlevel_init:
+	/*------- GPIO -------*/
+	write16 PDCR_A,	PDCR_D		! SPI0
+	write16 PGCR_A,	PGCR_D		! SPI0, GETHER MDIO gate(PTG1)
+	write16 PJCR_A,	PJCR_D		! SCIF4
+	write16 PTCR_A,	PTCR_D		! STATUS
+	write16 PSEL1_A, PSEL1_D	! SPI0
+	write16 PSEL2_A, PSEL2_D	! SPI0
+	write16 PSEL5_A, PSEL5_D	! STATUS
+
+	bra	exit_gpio
+	nop
+
+	.align	2
+
+/*------- GPIO -------*/
+PDCR_A:		.long	0xffec0006
+PGCR_A:		.long	0xffec000c
+PJCR_A:		.long	0xffec0012
+PTCR_A:		.long	0xffec0026
+PSEL1_A:	.long	0xffec0072
+PSEL2_A:	.long	0xffec0074
+PSEL5_A:	.long	0xffec007a
+
+PDCR_D:		.long	0x0000
+PGCR_D:		.long	0x0004
+PJCR_D:		.long	0x0000
+PTCR_D:		.long	0x0000
+PSEL1_D:	.long	0x0000
+PSEL2_D:	.long	0x3000
+PSEL5_D:	.long	0x0ffc
+
+	.align	2
+
+exit_gpio:
+	mov	#0, r14
+	mova	2f, r0
+	mov.l	PC_MASK, r1
+	tst	r0, r1
+	bf	2f
+
+	bra	exit_pmb
+	nop
+
+	.align	2
+
+/* If CPU runs on SDRAM (PC=0x5???????) or not. */
+PC_MASK:	.long	0x20000000
+
+2:
+	mov	#1, r14
+
+	mov.l	EXPEVT_A, r0
+	mov.l	@r0, r0
+	mov.l	EXPEVT_POWER_ON_RESET, r1
+	cmp/eq	r0, r1
+	bt	1f
+
+	/*
+	 * If EXPEVT value is manual reset or tlb multipul-hit,
+	 * initialization of DDR3IF is not necessary.
+	 */
+	bra	exit_ddr
+	nop
+
+1:
+	/*------- Reset -------*/
+	write32 MRSTCR0_A, MRSTCR0_D
+	write32 MRSTCR1_A, MRSTCR1_D
+
+	/* For Core Reset */
+	mov.l	DBACEN_A, r0
+	mov.l	@r0, r0
+	cmp/eq	#0, r0
+	bt	3f
+
+	/*
+	 * If DBACEN == 1(DBSC was already enabled), we have to avoid the
+	 * initialization of DDR3-SDRAM.
+	 */
+	bra	exit_ddr
+	nop
+
+3:
+	/*------- DDR3IF -------*/
+	/* oscillation stabilization time */
+	wait_timer	WAIT_OSC_TIME
+
+	/* step 3 */
+	write32 DBCMD_A, DBCMD_RSTL_VAL
+	wait_timer	WAIT_30US
+
+	/* step 4 */
+	write32 DBCMD_A, DBCMD_PDEN_VAL
+
+	/* step 5 */
+	write32 DBKIND_A, DBKIND_D
+
+	/* step 6 */
+	write32 DBCONF_A, DBCONF_D
+	write32 DBTR0_A, DBTR0_D
+	write32 DBTR1_A, DBTR1_D
+	write32 DBTR2_A, DBTR2_D
+	write32 DBTR3_A, DBTR3_D
+	write32 DBTR4_A, DBTR4_D
+	write32 DBTR5_A, DBTR5_D
+	write32 DBTR6_A, DBTR6_D
+	write32 DBTR7_A, DBTR7_D
+	write32 DBTR8_A, DBTR8_D
+	write32 DBTR9_A, DBTR9_D
+	write32 DBTR10_A, DBTR10_D
+	write32 DBTR11_A, DBTR11_D
+	write32 DBTR12_A, DBTR12_D
+	write32 DBTR13_A, DBTR13_D
+	write32 DBTR14_A, DBTR14_D
+	write32 DBTR15_A, DBTR15_D
+	write32 DBTR16_A, DBTR16_D
+	write32 DBTR17_A, DBTR17_D
+	write32 DBTR18_A, DBTR18_D
+	write32 DBTR19_A, DBTR19_D
+	write32 DBRNK0_A, DBRNK0_D
+
+	/* step 7 */
+	write32 DBPDCNT3_A, DBPDCNT3_D
+
+	/* step 8 */
+	write32 DBPDCNT1_A, DBPDCNT1_D
+	write32 DBPDCNT2_A, DBPDCNT2_D
+	write32 DBPDLCK_A, DBPDLCK_D
+	write32 DBPDRGA_A, DBPDRGA_D
+	write32 DBPDRGD_A, DBPDRGD_D
+
+	/* step 9 */
+	wait_timer	WAIT_30US
+
+	/* step 10 */
+	write32 DBPDCNT0_A, DBPDCNT0_D
+
+	/* step 11 */
+	wait_timer	WAIT_30US
+	wait_timer	WAIT_30US
+
+	/* step 12 */
+	write32 DBCMD_A, DBCMD_WAIT_VAL
+	wait_DBCMD
+
+	/* step 13 */
+	write32 DBCMD_A, DBCMD_RSTH_VAL
+	wait_DBCMD
+
+	/* step 14 */
+	write32 DBCMD_A, DBCMD_WAIT_VAL
+	write32 DBCMD_A, DBCMD_WAIT_VAL
+	write32 DBCMD_A, DBCMD_WAIT_VAL
+	write32 DBCMD_A, DBCMD_WAIT_VAL
+
+	/* step 15 */
+	write32 DBCMD_A, DBCMD_PDXT_VAL
+
+	/* step 16 */
+	write32 DBCMD_A, DBCMD_MRS2_VAL
+
+	/* step 17 */
+	write32 DBCMD_A, DBCMD_MRS3_VAL
+
+	/* step 18 */
+	write32 DBCMD_A, DBCMD_MRS1_VAL
+
+	/* step 19 */
+	write32 DBCMD_A, DBCMD_MRS0_VAL
+
+	/* step 20 */
+	write32 DBCMD_A, DBCMD_ZQCL_VAL
+
+	write32 DBCMD_A, DBCMD_REF_VAL
+	write32 DBCMD_A, DBCMD_REF_VAL
+	wait_DBCMD
+
+	/* step 21 */
+	write32 DBADJ0_A, DBADJ0_D
+	write32 DBADJ1_A, DBADJ1_D
+	write32 DBADJ2_A, DBADJ2_D
+
+	/* step 22 */
+	write32 DBRFCNF0_A, DBRFCNF0_D
+	write32 DBRFCNF1_A, DBRFCNF1_D
+	write32 DBRFCNF2_A, DBRFCNF2_D
+
+	/* step 23 */
+	write32 DBCALCNF_A, DBCALCNF_D
+
+	/* step 24 */
+	write32 DBRFEN_A, DBRFEN_D
+	write32 DBCMD_A, DBCMD_SRXT_VAL
+
+	/* step 25 */
+	write32 DBACEN_A, DBACEN_D
+
+	/* step 26 */
+	wait_DBCMD
+
+	bra	exit_ddr
+	nop
+
+	.align 2
+
+EXPEVT_A:		.long	0xff000024
+EXPEVT_POWER_ON_RESET:	.long	0x00000000
+
+/*------- Reset -------*/
+MRSTCR0_A:	.long	0xffd50030
+MRSTCR0_D:	.long	0xfe1ffe7f
+MRSTCR1_A:	.long	0xffd50034
+MRSTCR1_D:	.long	0xfff3ffff
+
+/*------- DDR3IF -------*/
+DBCMD_A:	.long	0xfe800018
+DBKIND_A:	.long	0xfe800020
+DBCONF_A:	.long	0xfe800024
+DBTR0_A:	.long	0xfe800040
+DBTR1_A:	.long	0xfe800044
+DBTR2_A:	.long	0xfe800048
+DBTR3_A:	.long	0xfe800050
+DBTR4_A:	.long	0xfe800054
+DBTR5_A:	.long	0xfe800058
+DBTR6_A:	.long	0xfe80005c
+DBTR7_A:	.long	0xfe800060
+DBTR8_A:	.long	0xfe800064
+DBTR9_A:	.long	0xfe800068
+DBTR10_A:	.long	0xfe80006c
+DBTR11_A:	.long	0xfe800070
+DBTR12_A:	.long	0xfe800074
+DBTR13_A:	.long	0xfe800078
+DBTR14_A:	.long	0xfe80007c
+DBTR15_A:	.long	0xfe800080
+DBTR16_A:	.long	0xfe800084
+DBTR17_A:	.long	0xfe800088
+DBTR18_A:	.long	0xfe80008c
+DBTR19_A:	.long	0xfe800090
+DBRNK0_A:	.long	0xfe800100
+DBPDCNT0_A:	.long	0xfe800200
+DBPDCNT1_A:	.long	0xfe800204
+DBPDCNT2_A:	.long	0xfe800208
+DBPDCNT3_A:	.long	0xfe80020c
+DBPDLCK_A:	.long	0xfe800280
+DBPDRGA_A:	.long	0xfe800290
+DBPDRGD_A:	.long	0xfe8002a0
+DBADJ0_A:	.long	0xfe8000c0
+DBADJ1_A:	.long	0xfe8000c4
+DBADJ2_A:	.long	0xfe8000c8
+DBRFCNF0_A:	.long	0xfe8000e0
+DBRFCNF1_A:	.long	0xfe8000e4
+DBRFCNF2_A:	.long	0xfe8000e8
+DBCALCNF_A:	.long	0xfe8000f4
+DBRFEN_A:	.long	0xfe800014
+DBACEN_A:	.long	0xfe800010
+DBWAIT_A:	.long	0xfe80001c
+
+WAIT_OSC_TIME:	.long	6000
+WAIT_30US:	.long	13333
+
+DBCMD_RSTL_VAL:	.long	0x20000000
+DBCMD_PDEN_VAL:	.long	0x1000d73c
+DBCMD_WAIT_VAL:	.long	0x0000d73c
+DBCMD_RSTH_VAL:	.long	0x2100d73c
+DBCMD_PDXT_VAL:	.long	0x110000c8
+DBCMD_MRS0_VAL:	.long	0x28000930
+DBCMD_MRS1_VAL:	.long	0x29000004
+DBCMD_MRS2_VAL:	.long	0x2a000008
+DBCMD_MRS3_VAL:	.long	0x2b000000
+DBCMD_ZQCL_VAL:	.long	0x03000200
+DBCMD_REF_VAL:	.long	0x0c000000
+DBCMD_SRXT_VAL:	.long	0x19000000
+DBKIND_D:	.long	0x00000007
+DBCONF_D:	.long	0x0f030a01
+DBTR0_D:	.long	0x00000007
+DBTR1_D:	.long	0x00000006
+DBTR2_D:	.long	0x00000000
+DBTR3_D:	.long	0x00000007
+DBTR4_D:	.long	0x00070007
+DBTR5_D:	.long	0x0000001b
+DBTR6_D:	.long	0x00000014
+DBTR7_D:	.long	0x00000005
+DBTR8_D:	.long	0x00000015
+DBTR9_D:	.long	0x00000006
+DBTR10_D:	.long	0x00000008
+DBTR11_D:	.long	0x00000007
+DBTR12_D:	.long	0x0000000e
+DBTR13_D:	.long	0x00000056
+DBTR14_D:	.long	0x00000006
+DBTR15_D:	.long	0x00000004
+DBTR16_D:	.long	0x00150002
+DBTR17_D:	.long	0x000c0017
+DBTR18_D:	.long	0x00000200
+DBTR19_D:	.long	0x00000040
+DBRNK0_D:	.long	0x00000001
+DBPDCNT0_D:	.long	0x00000001
+DBPDCNT1_D:	.long	0x00000001
+DBPDCNT2_D:	.long	0x00000000
+DBPDCNT3_D:	.long	0x00004010
+DBPDLCK_D:	.long	0x0000a55a
+DBPDRGA_D:	.long	0x00000028
+DBPDRGD_D:	.long	0x00017100
+
+DBADJ0_D:	.long	0x00000000
+DBADJ1_D:	.long	0x00000000
+DBADJ2_D:	.long	0x18061806
+DBRFCNF0_D:	.long	0x000001ff
+DBRFCNF1_D:	.long	0x08001000
+DBRFCNF2_D:	.long	0x00000000
+DBCALCNF_D:	.long	0x0000ffff
+DBRFEN_D:	.long	0x00000001
+DBACEN_D:	.long	0x00000001
+
+	.align 2
+exit_ddr:
+#if defined(CONFIG_SH_32BIT)
+	/*------- set PMB -------*/
+	write32	PASCR_A,	PASCR_29BIT_D
+	write32	MMUCR_A,	MMUCR_D
+
+	/*****************************************************************
+	 * ent	virt		phys		v	sz	c	wt
+	 * 0	0xa0000000	0x00000000	1	128M	0	1
+	 * 1	0xa8000000	0x48000000	1	128M	0	1
+	 * 5	0x88000000	0x48000000	1	128M	1	1
+	 */
+	write32	PMB_ADDR_SPIBOOT_A,	PMB_ADDR_SPIBOOT_D
+	write32	PMB_DATA_SPIBOOT_A,	PMB_DATA_SPIBOOT_D
+	write32	PMB_ADDR_DDR_C1_A,	PMB_ADDR_DDR_C1_D
+	write32	PMB_DATA_DDR_C1_A,	PMB_DATA_DDR_C1_D
+	write32	PMB_ADDR_DDR_N1_A,	PMB_ADDR_DDR_N1_D
+	write32	PMB_DATA_DDR_N1_A,	PMB_DATA_DDR_N1_D
+
+	write32	PMB_ADDR_ENTRY2,	PMB_ADDR_NOT_USE_D
+	write32	PMB_ADDR_ENTRY3,	PMB_ADDR_NOT_USE_D
+	write32	PMB_ADDR_ENTRY4,	PMB_ADDR_NOT_USE_D
+	write32	PMB_ADDR_ENTRY6,	PMB_ADDR_NOT_USE_D
+	write32	PMB_ADDR_ENTRY7,	PMB_ADDR_NOT_USE_D
+	write32	PMB_ADDR_ENTRY8,	PMB_ADDR_NOT_USE_D
+	write32	PMB_ADDR_ENTRY9,	PMB_ADDR_NOT_USE_D
+	write32	PMB_ADDR_ENTRY10,	PMB_ADDR_NOT_USE_D
+	write32	PMB_ADDR_ENTRY11,	PMB_ADDR_NOT_USE_D
+	write32	PMB_ADDR_ENTRY12,	PMB_ADDR_NOT_USE_D
+	write32	PMB_ADDR_ENTRY13,	PMB_ADDR_NOT_USE_D
+	write32	PMB_ADDR_ENTRY14,	PMB_ADDR_NOT_USE_D
+	write32	PMB_ADDR_ENTRY15,	PMB_ADDR_NOT_USE_D
+
+	write32	PASCR_A,	PASCR_INIT
+	mov.l	DUMMY_ADDR, r0
+	icbi	@r0
+#endif	/* if defined(CONFIG_SH_32BIT) */
+
+exit_pmb:
+	/* CPU is running on ILRAM? */
+	mov	r14, r0
+	tst	#1, r0
+	bt	1f
+
+	mov.l	_stack_ilram, r15
+	mov.l	_spiboot_main, r0
+100:	bsrf	r0
+	nop
+
+	.align	2
+_spiboot_main:	.long	(spiboot_main - (100b + 4))
+_stack_ilram:	.long	0xe5204000
+
+1:
+	write32	CCR_A,	CCR_D
+
+	rts
+	 nop
+
+	.align 2
+
+#if defined(CONFIG_SH_32BIT)
+/*------- set PMB -------*/
+PMB_ADDR_SPIBOOT_A:	.long	PMB_ADDR_BASE(0)
+PMB_ADDR_DDR_N1_A:	.long	PMB_ADDR_BASE(1)
+PMB_ADDR_DDR_C1_A:	.long	PMB_ADDR_BASE(5)
+PMB_ADDR_ENTRY2:	.long	PMB_ADDR_BASE(2)
+PMB_ADDR_ENTRY3:	.long	PMB_ADDR_BASE(3)
+PMB_ADDR_ENTRY4:	.long	PMB_ADDR_BASE(4)
+PMB_ADDR_ENTRY6:	.long	PMB_ADDR_BASE(6)
+PMB_ADDR_ENTRY7:	.long	PMB_ADDR_BASE(7)
+PMB_ADDR_ENTRY8:	.long	PMB_ADDR_BASE(8)
+PMB_ADDR_ENTRY9:	.long	PMB_ADDR_BASE(9)
+PMB_ADDR_ENTRY10:	.long	PMB_ADDR_BASE(10)
+PMB_ADDR_ENTRY11:	.long	PMB_ADDR_BASE(11)
+PMB_ADDR_ENTRY12:	.long	PMB_ADDR_BASE(12)
+PMB_ADDR_ENTRY13:	.long	PMB_ADDR_BASE(13)
+PMB_ADDR_ENTRY14:	.long	PMB_ADDR_BASE(14)
+PMB_ADDR_ENTRY15:	.long	PMB_ADDR_BASE(15)
+
+PMB_ADDR_SPIBOOT_D:	.long	mk_pmb_addr_val(0xa0)
+PMB_ADDR_DDR_C1_D:	.long	mk_pmb_addr_val(0x88)
+PMB_ADDR_DDR_N1_D:	.long	mk_pmb_addr_val(0xa8)
+PMB_ADDR_NOT_USE_D:	.long	0x00000000
+
+PMB_DATA_SPIBOOT_A:	.long	PMB_DATA_BASE(0)
+PMB_DATA_DDR_N1_A:	.long	PMB_DATA_BASE(1)
+PMB_DATA_DDR_C1_A:	.long	PMB_DATA_BASE(5)
+
+/*						ppn   ub v s1 s0  c  wt */
+PMB_DATA_SPIBOOT_D:	.long	mk_pmb_data_val(0x00, 0, 1, 1, 0, 0, 1)
+PMB_DATA_DDR_C1_D:	.long	mk_pmb_data_val(0x48, 0, 1, 1, 0, 1, 1)
+PMB_DATA_DDR_N1_D:	.long	mk_pmb_data_val(0x48, 1, 1, 1, 0, 0, 1)
+
+PASCR_A:		.long	0xff000070
+DUMMY_ADDR:		.long	0xa0000000
+PASCR_29BIT_D:		.long	0x00000000
+PASCR_INIT:		.long	0x80000080
+MMUCR_A:		.long	0xff000010
+MMUCR_D:		.long	0x00000004	/* clear ITLB */
+#endif	/* CONFIG_SH_32BIT */
+
+CCR_A:		.long	CCR
+CCR_D:		.long	CCR_CACHE_INIT
diff --git a/board/renesas/sh7752evb/sh7752evb.c b/board/renesas/sh7752evb/sh7752evb.c
new file mode 100644
index 0000000..e996593
--- /dev/null
+++ b/board/renesas/sh7752evb/sh7752evb.c
@@ -0,0 +1,330 @@
+/*
+ * Copyright (C) 2012  Renesas Solutions Corp.
+ *
+ * See file CREDITS for list of people who contributed to this
+ * project.
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of
+ * the License, or (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
+ * MA 02111-1307 USA
+ */
+
+#include <common.h>
+#include <malloc.h>
+#include <asm/processor.h>
+#include <asm/io.h>
+#include <asm/mmc.h>
+#include <spi_flash.h>
+
+int checkboard(void)
+{
+	puts("BOARD: SH7752 evaluation board (R0P7752C00000RZ)\n");
+
+	return 0;
+}
+
+static void init_gpio(void)
+{
+	struct gpio_regs *gpio = GPIO_BASE;
+	struct sermux_regs *sermux = SERMUX_BASE;
+
+	/* GPIO */
+	writew(0x0000, &gpio->pacr);	/* GETHER */
+	writew(0x0001, &gpio->pbcr);	/* INTC */
+	writew(0x0000, &gpio->pccr);	/* PWMU, INTC */
+	writew(0xeaff, &gpio->pecr);	/* GPIO */
+	writew(0x0000, &gpio->pfcr);	/* WDT */
+	writew(0x0000, &gpio->phcr);	/* SPI1 */
+	writew(0x0000, &gpio->picr);	/* SDHI */
+	writew(0x0003, &gpio->pkcr);	/* SerMux */
+	writew(0x0000, &gpio->plcr);	/* SerMux */
+	writew(0x0000, &gpio->pmcr);	/* RIIC */
+	writew(0x0000, &gpio->pncr);	/* USB, SGPIO */
+	writew(0x0000, &gpio->pocr);	/* SGPIO */
+	writew(0xd555, &gpio->pqcr);	/* GPIO */
+	writew(0x0000, &gpio->prcr);	/* RIIC */
+	writew(0x0000, &gpio->pscr);	/* RIIC */
+	writeb(0x00, &gpio->pudr);
+	writew(0x5555, &gpio->pucr);	/* Debug LED */
+	writew(0x0000, &gpio->pvcr);	/* RSPI */
+	writew(0x0000, &gpio->pwcr);	/* EVC */
+	writew(0x0000, &gpio->pxcr);	/* LBSC */
+	writew(0x0000, &gpio->pycr);	/* LBSC */
+	writew(0x0000, &gpio->pzcr);	/* eMMC */
+	writew(0xfe00, &gpio->psel0);
+	writew(0xff00, &gpio->psel3);
+	writew(0x771f, &gpio->psel4);
+	writew(0x00ff, &gpio->psel6);
+	writew(0xfc00, &gpio->psel7);
+
+	writeb(0x10, &sermux->smr0);	/* SMR0: SerMux mode 0 */
+}
+
+static void init_usb_phy(void)
+{
+	struct usb_common_regs *common0 = USB0_COMMON_BASE;
+	struct usb_common_regs *common1 = USB1_COMMON_BASE;
+	struct usb0_phy_regs *phy = USB0_PHY_BASE;
+	struct usb1_port_regs *port = USB1_PORT_BASE;
+	struct usb1_alignment_regs *align = USB1_ALIGNMENT_BASE;
+
+	writew(0x0100, &phy->reset);		/* set reset */
+	/* port0 = USB0, port1 = USB1 */
+	writew(0x0002, &phy->portsel);
+	writel(0x0001, &port->port1sel);	/* port1 = Host */
+	writew(0x0111, &phy->reset);		/* clear reset */
+
+	writew(0x4000, &common0->suspmode);
+	writew(0x4000, &common1->suspmode);
+
+#if defined(__LITTLE_ENDIAN)
+	writel(0x00000000, &align->ehcidatac);
+	writel(0x00000000, &align->ohcidatac);
+#endif
+}
+
+static void init_gether_mdio(void)
+{
+	struct gpio_regs *gpio = GPIO_BASE;
+
+	writew(readw(&gpio->pgcr) | 0x0004, &gpio->pgcr);
+	writeb(readb(&gpio->pgdr) | 0x02, &gpio->pgdr);	/* Use ET0-MDIO */
+}
+
+static void set_mac_to_sh_giga_eth_register(int channel, char *mac_string)
+{
+	struct ether_mac_regs *ether;
+	unsigned char mac[6];
+	unsigned long val;
+
+	eth_parse_enetaddr(mac_string, mac);
+
+	if (!channel)
+		ether = GETHER0_MAC_BASE;
+	else
+		ether = GETHER1_MAC_BASE;
+
+	val = (mac[0] << 24) | (mac[1] << 16) | (mac[2] << 8) | mac[3];
+	writel(val, &ether->mahr);
+	val = (mac[4] << 8) | mac[5];
+	writel(val, &ether->malr);
+}
+
+/*****************************************************************
+ * This PMB must be set on this timing. The lowlevel_init is run on
+ * Area 0(phys 0x00000000), so we have to map it.
+ *
+ * The new PMB table is following:
+ * ent	virt		phys		v	sz	c	wt
+ * 0	0xa0000000	0x40000000	1	128M	0	1
+ * 1	0xa8000000	0x48000000	1	128M	0	1
+ * 2	0xb0000000	0x50000000	1	128M	0	1
+ * 3	0xb8000000	0x58000000	1	128M	0	1
+ * 4	0x80000000	0x40000000	1	128M	1	1
+ * 5	0x88000000	0x48000000	1	128M	1	1
+ * 6	0x90000000	0x50000000	1	128M	1	1
+ * 7	0x98000000	0x58000000	1	128M	1	1
+ */
+static void set_pmb_on_board_init(void)
+{
+	struct mmu_regs *mmu = MMU_BASE;
+
+	/* clear ITLB */
+	writel(0x00000004, &mmu->mmucr);
+
+	/* delete PMB for SPIBOOT */
+	writel(0, PMB_ADDR_BASE(0));
+	writel(0, PMB_DATA_BASE(0));
+
+	/* add PMB for SDRAM(0x40000000 - 0x47ffffff) */
+	/*			ppn  ub v s1 s0  c  wt */
+	writel(mk_pmb_addr_val(0xa0), PMB_ADDR_BASE(0));
+	writel(mk_pmb_data_val(0x40, 1, 1, 1, 0, 0, 1), PMB_DATA_BASE(0));
+	writel(mk_pmb_addr_val(0xb0), PMB_ADDR_BASE(2));
+	writel(mk_pmb_data_val(0x50, 1, 1, 1, 0, 0, 1), PMB_DATA_BASE(2));
+	writel(mk_pmb_addr_val(0xb8), PMB_ADDR_BASE(3));
+	writel(mk_pmb_data_val(0x58, 1, 1, 1, 0, 0, 1), PMB_DATA_BASE(3));
+	writel(mk_pmb_addr_val(0x80), PMB_ADDR_BASE(4));
+	writel(mk_pmb_data_val(0x40, 0, 1, 1, 0, 1, 1), PMB_DATA_BASE(4));
+	writel(mk_pmb_addr_val(0x90), PMB_ADDR_BASE(6));
+	writel(mk_pmb_data_val(0x50, 0, 1, 1, 0, 1, 1), PMB_DATA_BASE(6));
+	writel(mk_pmb_addr_val(0x98), PMB_ADDR_BASE(7));
+	writel(mk_pmb_data_val(0x58, 0, 1, 1, 0, 1, 1), PMB_DATA_BASE(7));
+}
+
+int board_init(void)
+{
+	init_gpio();
+	set_pmb_on_board_init();
+
+	init_usb_phy();
+	init_gether_mdio();
+
+	return 0;
+}
+
+int dram_init(void)
+{
+	DECLARE_GLOBAL_DATA_PTR;
+
+	gd->bd->bi_memstart = CONFIG_SYS_SDRAM_BASE;
+	gd->bd->bi_memsize = CONFIG_SYS_SDRAM_SIZE;
+	printf("DRAM:  %dMB\n", CONFIG_SYS_SDRAM_SIZE / (1024 * 1024));
+
+	return 0;
+}
+
+int board_mmc_init(bd_t *bis)
+{
+	struct gpio_regs *gpio = GPIO_BASE;
+
+	writew(readw(&gpio->pgcr) | 0x0040, &gpio->pgcr);
+	writeb(readb(&gpio->pgdr) & ~0x08, &gpio->pgdr); /* Reset */
+	udelay(1);
+	writeb(readb(&gpio->pgdr) | 0x08, &gpio->pgdr);	/* Release reset */
+	udelay(200);
+
+	return mmcif_mmc_init();
+}
+
+static int get_sh_eth_mac_raw(unsigned char *buf, int size)
+{
+	struct spi_flash *spi;
+	int ret;
+
+	spi = spi_flash_probe(0, 0, 1000000, SPI_MODE_3);
+	if (spi == NULL) {
+		printf("%s: spi_flash probe failed.\n", __func__);
+		return 1;
+	}
+
+	ret = spi_flash_read(spi, SH7752EVB_ETHERNET_MAC_BASE, size, buf);
+	if (ret) {
+		printf("%s: spi_flash read failed.\n", __func__);
+		spi_flash_free(spi);
+		return 1;
+	}
+	spi_flash_free(spi);
+
+	return 0;
+}
+
+static int get_sh_eth_mac(int channel, char *mac_string, unsigned char *buf)
+{
+	memcpy(mac_string, &buf[channel * (SH7752EVB_ETHERNET_MAC_SIZE + 1)],
+		SH7752EVB_ETHERNET_MAC_SIZE);
+	mac_string[SH7752EVB_ETHERNET_MAC_SIZE] = 0x00;	/* terminate */
+
+	return 0;
+}
+
+static void init_ethernet_mac(void)
+{
+	char mac_string[64];
+	char env_string[64];
+	int i;
+	unsigned char *buf;
+
+	buf = malloc(256);
+	if (!buf) {
+		printf("%s: malloc failed.\n", __func__);
+		return;
+	}
+	get_sh_eth_mac_raw(buf, 256);
+
+	/* Gigabit Ethernet */
+	for (i = 0; i < SH7752EVB_ETHERNET_NUM_CH; i++) {
+		get_sh_eth_mac(i, mac_string, buf);
+		if (i == 0)
+			setenv("ethaddr", mac_string);
+		else {
+			sprintf(env_string, "eth%daddr", i);
+			setenv(env_string, mac_string);
+		}
+		set_mac_to_sh_giga_eth_register(i, mac_string);
+	}
+
+	free(buf);
+}
+
+int board_late_init(void)
+{
+	init_ethernet_mac();
+
+	return 0;
+}
+
+int do_write_mac(cmd_tbl_t *cmdtp, int flag, int argc, char * const argv[])
+{
+	int i, ret;
+	char mac_string[256];
+	struct spi_flash *spi;
+	unsigned char *buf;
+
+	if (argc != 3) {
+		buf = malloc(256);
+		if (!buf) {
+			printf("%s: malloc failed.\n", __func__);
+			return 1;
+		}
+
+		get_sh_eth_mac_raw(buf, 256);
+
+		/* print current MAC address */
+		for (i = 0; i < SH7752EVB_ETHERNET_NUM_CH; i++) {
+			get_sh_eth_mac(i, mac_string, buf);
+			printf("GETHERC ch%d = %s\n", i, mac_string);
+		}
+		free(buf);
+		return 0;
+	}
+
+	/* new setting */
+	memset(mac_string, 0xff, sizeof(mac_string));
+	sprintf(mac_string, "%s\t%s",
+		argv[1], argv[2]);
+
+	/* write MAC data to SPI rom */
+	spi = spi_flash_probe(0, 0, 1000000, SPI_MODE_3);
+	if (!spi) {
+		printf("%s: spi_flash probe failed.\n", __func__);
+		return 1;
+	}
+
+	ret = spi_flash_erase(spi, SH7752EVB_ETHERNET_MAC_BASE_SPI,
+				SH7752EVB_SPI_SECTOR_SIZE);
+	if (ret) {
+		printf("%s: spi_flash erase failed.\n", __func__);
+		return 1;
+	}
+
+	ret = spi_flash_write(spi, SH7752EVB_ETHERNET_MAC_BASE_SPI,
+				sizeof(mac_string), mac_string);
+	if (ret) {
+		printf("%s: spi_flash write failed.\n", __func__);
+		spi_flash_free(spi);
+		return 1;
+	}
+	spi_flash_free(spi);
+
+	puts("The writing of the MAC address to SPI ROM was completed.\n");
+
+	return 0;
+}
+
+U_BOOT_CMD(
+	write_mac,	3,	1,	do_write_mac,
+	"write MAC address for GETHERC",
+	"[GETHERC ch0] [GETHERC ch1]\n"
+);
diff --git a/board/renesas/sh7752evb/spi-boot.c b/board/renesas/sh7752evb/spi-boot.c
new file mode 100644
index 0000000..91565d4
--- /dev/null
+++ b/board/renesas/sh7752evb/spi-boot.c
@@ -0,0 +1,116 @@
+/*
+ * Copyright (C) 2012  Renesas Solutions Corp.
+ *
+ * This file is subject to the terms and conditions of the GNU Lesser
+ * General Public License.  See the file "COPYING.LIB" in the main
+ * directory of this archive for more details.
+ */
+
+#include <common.h>
+
+#define CONFIG_RAM_BOOT_PHYS	CONFIG_SYS_TEXT_BASE
+#define CONFIG_SPI_ADDR		0x00000000
+#define CONFIG_SPI_LENGTH	CONFIG_SYS_MONITOR_LEN
+#define CONFIG_RAM_BOOT		CONFIG_SYS_TEXT_BASE
+
+#define SPIWDMADR	0xFE001018
+#define SPIWDMCNTR	0xFE001020
+#define SPIDMCOR	0xFE001028
+#define SPIDMINTSR	0xFE001188
+#define SPIDMINTMR	0xFE001190
+
+#define SPIDMINTSR_DMEND	0x00000004
+
+#define TBR	0xFE002000
+#define RBR	0xFE002000
+
+#define CR1	0xFE002008
+#define CR2	0xFE002010
+#define CR3	0xFE002018
+#define CR4	0xFE002020
+
+/* CR1 */
+#define SPI_TBE		0x80
+#define SPI_TBF		0x40
+#define SPI_RBE		0x20
+#define SPI_RBF		0x10
+#define SPI_PFONRD	0x08
+#define SPI_SSDB	0x04
+#define SPI_SSD		0x02
+#define SPI_SSA		0x01
+
+/* CR2 */
+#define SPI_RSTF	0x80
+#define SPI_LOOPBK	0x40
+#define SPI_CPOL	0x20
+#define SPI_CPHA	0x10
+#define SPI_L1M0	0x08
+
+/* CR4 */
+#define SPI_TBEI	0x80
+#define SPI_TBFI	0x40
+#define SPI_RBEI	0x20
+#define SPI_RBFI	0x10
+#define SPI_SpiS0	0x02
+#define SPI_SSS		0x01
+
+#define spi_write(val, addr)	(*(volatile unsigned long *)(addr)) = val
+#define spi_read(addr)		(*(volatile unsigned long *)(addr))
+
+/* M25P80 */
+#define M25_READ	0x03
+
+#define __uses_spiboot2	__attribute__((section(".spiboot2.text")))
+static void __uses_spiboot2 spi_reset(void)
+{
+	int timeout = 0x00100000;
+
+	/* Make sure the last transaction is finalized */
+	spi_write(0x00, CR3);
+	spi_write(0x02, CR1);
+	while (!(spi_read(CR4) & SPI_SpiS0)) {
+		if (timeout-- < 0)
+			break;
+	}
+	spi_write(0x00, CR1);
+
+	spi_write(spi_read(CR2) | SPI_RSTF, CR2);	/* fifo reset */
+	spi_write(spi_read(CR2) & ~SPI_RSTF, CR2);
+
+	spi_write(0, SPIDMCOR);
+}
+
+static void __uses_spiboot2 spi_read_flash(void *buf, unsigned long addr,
+					   unsigned long len)
+{
+	spi_write(M25_READ, TBR);
+	spi_write((addr >> 16) & 0xFF, TBR);
+	spi_write((addr >> 8) & 0xFF, TBR);
+	spi_write(addr & 0xFF, TBR);
+
+	spi_write(SPIDMINTSR_DMEND, SPIDMINTSR);
+	spi_write((unsigned long)buf, SPIWDMADR);
+	spi_write(len & 0xFFFFFFE0, SPIWDMCNTR);
+	spi_write(1, SPIDMCOR);
+
+	spi_write(0xff, CR3);
+	spi_write(spi_read(CR1) | SPI_SSDB, CR1);
+	spi_write(spi_read(CR1) | SPI_SSA, CR1);
+
+	while (!(spi_read(SPIDMINTSR) & SPIDMINTSR_DMEND))
+		;
+
+	/* Nagate SP0-SS0 */
+	spi_write(0, CR1);
+}
+
+void __uses_spiboot2 spiboot_main(void)
+{
+	void (*_start)(void) = (void *)CONFIG_SYS_TEXT_BASE;
+
+	spi_reset();
+	spi_read_flash((void *)CONFIG_RAM_BOOT_PHYS, CONFIG_SPI_ADDR,
+			CONFIG_SPI_LENGTH);
+
+	_start();
+}
diff --git a/board/renesas/sh7752evb/u-boot.lds b/board/renesas/sh7752evb/u-boot.lds
new file mode 100644
index 0000000..28449b6
--- /dev/null
+++ b/board/renesas/sh7752evb/u-boot.lds
@@ -0,0 +1,97 @@
+/*
+ * Copyright (C) 2007
+ * Nobuhiro Iwamatsu <iwamatsu@nigauri.org>
+ *
+ * Copyright (C) 2012
+ * Yoshihiro Shimoda <yoshihiro.shimoda.uh@renesas.com>
+ *
+ * See file CREDITS for list of people who contributed to this
+ * project.
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of
+ * the License, or (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
+ * MA 02111-1307 USA
+ */
+
+OUTPUT_FORMAT("elf32-sh-linux", "elf32-sh-linux", "elf32-sh-linux")
+OUTPUT_ARCH(sh)
+ENTRY(_start)
+
+SECTIONS
+{
+	/*
+	 * entry and reloct_dst will be provided via ldflags
+	 */
+	. = .;
+
+	PROVIDE (_ftext = .);
+	PROVIDE (_fcode = .);
+	PROVIDE (_start = .);
+
+	.text :
+	{
+		KEEP(arch/sh/cpu/sh4/start.o		(.text))
+		*(.spiboot1.text)
+		*(.spiboot2.text)
+		. = ALIGN(8192);
+		common/env_embedded.o	(.ppcenv)
+		. = ALIGN(8192);
+		common/env_embedded.o	(.ppcenvr)
+		. = ALIGN(8192);
+		*(.text)
+		. = ALIGN(4);
+	} =0xFF
+	PROVIDE (_ecode = .);
+	.rodata :
+	{
+		*(SORT_BY_ALIGNMENT(SORT_BY_NAME(.rodata*)))
+		. = ALIGN(4);
+	}
+	PROVIDE (_etext = .);
+
+
+	PROVIDE (_fdata = .);
+	.data :
+	{
+		*(.data)
+		. = ALIGN(4);
+	}
+	PROVIDE (_edata = .);
+
+	PROVIDE (_fgot = .);
+	.got :
+	{
+		*(.got)
+		. = ALIGN(4);
+	}
+	PROVIDE (_egot = .);
+
+	.u_boot_list : {
+		#include <u-boot.lst>
+	}
+
+	PROVIDE (reloc_dst_end = .);
+	/* _reloc_dst_end = .; */
+
+	PROVIDE (bss_start = .);
+	PROVIDE (__bss_start = .);
+	.bss (NOLOAD) :
+	{
+		*(.bss)
+		. = ALIGN(4);
+	}
+	PROVIDE (bss_end = .);
+
+	PROVIDE (__bss_end__ = .);
+}
diff --git a/boards.cfg b/boards.cfg
index 35f38f3..2acc941 100644
--- a/boards.cfg
+++ b/boards.cfg
@@ -373,8 +373,8 @@
 M5235EVB_Flash32             m68k        mcf523x     m5235evb            freescale      -           M5235EVB:NORFLASH_PS32BIT,SYS_TEXT_BASE=0xFFC00000
 cobra5272                    m68k        mcf52x2     cobra5272           -
 idmr                         m68k        mcf52x2
-eb_cpu5282                   m68k        mcf52x2     eb_cpu5282          BuS            -           eb_cpu5282:SYS_TEXT_BASE=0xFF000000
-eb_cpu5282_internal          m68k        mcf52x2     eb_cpu5282          BuS            -           eb_cpu5282:SYS_TEXT_BASE=0xF0000000
+eb_cpu5282                   m68k        mcf52x2     eb_cpu5282          BuS            -           eb_cpu5282:SYS_TEXT_BASE=0xFF000000,SYS_MONITOR_BASE=0xFF000400
+eb_cpu5282_internal          m68k        mcf52x2     eb_cpu5282          BuS            -           eb_cpu5282:SYS_TEXT_BASE=0xF0000000,SYS_MONITOR_BASE=0xF0000418
 TASREG                       m68k        mcf52x2     tasreg              esd
 M5208EVBE                    m68k        mcf52x2     m5208evbe           freescale
 M5249EVB                     m68k        mcf52x2     m5249evb            freescale
@@ -1089,6 +1089,7 @@
 MigoR                        sh          sh4         MigoR               renesas        -
 r2dplus                      sh          sh4         r2dplus             renesas        -
 r7780mp                      sh          sh4         r7780mp             renesas        -
+sh7752evb                    sh          sh4         sh7752evb           renesas        -
 sh7757lcr                    sh          sh4         sh7757lcr           renesas        -
 sh7763rdp                    sh          sh4         sh7763rdp           renesas        -
 sh7785lcr                    sh          sh4         sh7785lcr           renesas        -
diff --git a/common/cmd_setexpr.c b/common/cmd_setexpr.c
index 7b140de..5a04295 100644
--- a/common/cmd_setexpr.c
+++ b/common/cmd_setexpr.c
@@ -57,12 +57,22 @@
 	int w;
 
 	/* Validate arguments */
-	if ((argc != 5) || (strlen(argv[3]) != 1))
+	if (argc != 5 && argc != 3)
+		return CMD_RET_USAGE;
+	if (argc == 5 && strlen(argv[3]) != 1)
 		return CMD_RET_USAGE;
 
 	w = cmd_get_data_size(argv[0], 4);
 
 	a = get_arg(argv[2], w);
+
+	if (argc == 3) {
+		sprintf(buf, "%lx", a);
+		setenv(argv[1], buf);
+
+		return 0;
+	}
+
 	b = get_arg(argv[4], w);
 
 	switch (argv[3][0]) {
@@ -87,8 +97,11 @@
 U_BOOT_CMD(
 	setexpr, 5, 0, do_setexpr,
 	"set environment variable as the result of eval expression",
-	"[.b, .w, .l] name value1 <op> value2\n"
+	"[.b, .w, .l] name [*]value1 <op> [*]value2\n"
 	"    - set environment variable 'name' to the result of the evaluated\n"
 	"      express specified by <op>.  <op> can be &, |, ^, +, -, *, /, %\n"
-	"      size argument is only meaningful if value1 and/or value2 are memory addresses"
+	"      size argument is only meaningful if value1 and/or value2 are\n"
+	"      memory addresses (*)\n"
+	"setexpr[.b, .w, .l] name *value\n"
+	"    - load a memory address into a variable"
 );
diff --git a/common/cmd_sf.c b/common/cmd_sf.c
index 5ac1d0c..b175358 100644
--- a/common/cmd_sf.c
+++ b/common/cmd_sf.c
@@ -5,6 +5,7 @@
  * Licensed under the GPL-2 or later.
  */
 
+#include <div64.h>
 #include <common.h>
 #include <malloc.h>
 #include <spi_flash.h>
@@ -67,6 +68,23 @@
 	return 1;
 }
 
+/**
+ * This function takes a byte length and a delta unit of time to compute the
+ * approximate bytes per second
+ *
+ * @param len		amount of bytes currently processed
+ * @param start_ms	start time of processing in ms
+ * @return bytes per second if OK, 0 on error
+ */
+static ulong bytes_per_second(unsigned int len, ulong start_ms)
+{
+	/* less accurate but avoids overflow */
+	if (len >= ((unsigned int) -1) / 1024)
+		return len / (max(get_timer(start_ms) / 1024, 1));
+	else
+		return 1024 * len / max(get_timer(start_ms), 1);
+}
+
 static int do_spi_flash_probe(int argc, char * const argv[])
 {
 	unsigned int bus = CONFIG_SF_DEFAULT_BUS;
@@ -167,11 +185,26 @@
 	const char *end = buf + len;
 	size_t todo;		/* number of bytes to do in this pass */
 	size_t skipped = 0;	/* statistics */
+	const ulong start_time = get_timer(0);
+	size_t scale = 1;
+	const char *start_buf = buf;
+	ulong delta;
 
+	if (end - buf >= 200)
+		scale = (end - buf) / 100;
 	cmp_buf = malloc(flash->sector_size);
 	if (cmp_buf) {
+		ulong last_update = get_timer(0);
+
 		for (; buf < end && !err_oper; buf += todo, offset += todo) {
 			todo = min(end - buf, flash->sector_size);
+			if (get_timer(last_update) > 100) {
+				printf("   \rUpdating, %zu%% %lu B/s",
+					100 - (end - buf) / scale,
+					bytes_per_second(buf - start_buf,
+							 start_time));
+				last_update = get_timer(0);
+			}
 			err_oper = spi_flash_update_block(flash, offset, todo,
 					buf, cmp_buf, &skipped);
 		}
@@ -179,12 +212,17 @@
 		err_oper = "malloc";
 	}
 	free(cmp_buf);
+	putc('\r');
 	if (err_oper) {
 		printf("SPI flash failed in %s step\n", err_oper);
 		return 1;
 	}
-	printf("%zu bytes written, %zu bytes skipped\n", len - skipped,
-	       skipped);
+
+	delta = get_timer(start_time);
+	printf("%zu bytes written, %zu bytes skipped", len - skipped,
+		skipped);
+	printf(" in %ld.%lds, speed %ld B/s\n",
+		delta / 1000, delta % 1000, bytes_per_second(len, start_time));
 
 	return 0;
 }
@@ -271,9 +309,164 @@
 		printf("SPI flash %s failed\n", argv[0]);
 		return 1;
 	}
+
+	return 0;
+}
+
+#ifdef CONFIG_CMD_SF_TEST
+enum {
+	STAGE_ERASE,
+	STAGE_CHECK,
+	STAGE_WRITE,
+	STAGE_READ,
+
+	STAGE_COUNT,
+};
+
+static char *stage_name[STAGE_COUNT] = {
+	"erase",
+	"check",
+	"write",
+	"read",
+};
+
+struct test_info {
+	int stage;
+	int bytes;
+	unsigned base_ms;
+	unsigned time_ms[STAGE_COUNT];
+};
+
+static void show_time(struct test_info *test, int stage)
+{
+	uint64_t speed;	/* KiB/s */
+	int bps;	/* Bits per second */
+
+	speed = (long long)test->bytes * 1000;
+	do_div(speed, test->time_ms[stage] * 1024);
+	bps = speed * 8;
+
+	printf("%d %s: %d ticks, %d KiB/s %d.%03d Mbps\n", stage,
+	       stage_name[stage], test->time_ms[stage],
+	       (int)speed, bps / 1000, bps % 1000);
+}
+
+static void spi_test_next_stage(struct test_info *test)
+{
+	test->time_ms[test->stage] = get_timer(test->base_ms);
+	show_time(test, test->stage);
+	test->base_ms = get_timer(0);
+	test->stage++;
+}
+
+/**
+ * Run a test on the SPI flash
+ *
+ * @param flash		SPI flash to use
+ * @param buf		Source buffer for data to write
+ * @param len		Size of data to read/write
+ * @param offset	Offset within flash to check
+ * @param vbuf		Verification buffer
+ * @return 0 if ok, -1 on error
+ */
+static int spi_flash_test(struct spi_flash *flash, char *buf, ulong len,
+			   ulong offset, char *vbuf)
+{
+	struct test_info test;
+	int i;
+
+	printf("SPI flash test:\n");
+	memset(&test, '\0', sizeof(test));
+	test.base_ms = get_timer(0);
+	test.bytes = len;
+	if (spi_flash_erase(flash, offset, len)) {
+		printf("Erase failed\n");
+		return -1;
+	}
+	spi_test_next_stage(&test);
+
+	if (spi_flash_read(flash, offset, len, vbuf)) {
+		printf("Check read failed\n");
+		return -1;
+	}
+	for (i = 0; i < len; i++) {
+		if (vbuf[i] != 0xff) {
+			printf("Check failed at %d\n", i);
+			print_buffer(i, vbuf + i, 1, min(len - i, 0x40), 0);
+			return -1;
+		}
+	}
+	spi_test_next_stage(&test);
+
+	if (spi_flash_write(flash, offset, len, buf)) {
+		printf("Write failed\n");
+		return -1;
+	}
+	memset(vbuf, '\0', len);
+	spi_test_next_stage(&test);
+
+	if (spi_flash_read(flash, offset, len, vbuf)) {
+		printf("Read failed\n");
+		return -1;
+	}
+	spi_test_next_stage(&test);
+
+	for (i = 0; i < len; i++) {
+		if (buf[i] != vbuf[i]) {
+			printf("Verify failed at %d, good data:\n", i);
+			print_buffer(i, buf + i, 1, min(len - i, 0x40), 0);
+			printf("Bad data:\n");
+			print_buffer(i, vbuf + i, 1, min(len - i, 0x40), 0);
+			return -1;
+		}
+	}
+	printf("Test passed\n");
+	for (i = 0; i < STAGE_COUNT; i++)
+		show_time(&test, i);
+
+	return 0;
+}
+
+static int do_spi_flash_test(int argc, char * const argv[])
+{
+	unsigned long offset;
+	unsigned long len;
+	char *buf = (char *)CONFIG_SYS_TEXT_BASE;
+	char *endp;
+	char *vbuf;
+	int ret;
+
+	offset = simple_strtoul(argv[1], &endp, 16);
+	if (*argv[1] == 0 || *endp != 0)
+		return -1;
+	len = simple_strtoul(argv[2], &endp, 16);
+	if (*argv[2] == 0 || *endp != 0)
+		return -1;
+
+	vbuf = malloc(len);
+	if (!vbuf) {
+		printf("Cannot allocate memory\n");
+		return 1;
+	}
+	buf = malloc(len);
+	if (!buf) {
+		free(vbuf);
+		printf("Cannot allocate memory\n");
+		return 1;
+	}
+
+	memcpy(buf, (char *)CONFIG_SYS_TEXT_BASE, len);
+	ret = spi_flash_test(flash, buf, len, offset, vbuf);
+	free(vbuf);
+	free(buf);
+	if (ret) {
+		printf("Test failed\n");
+		return 1;
+	}
 
 	return 0;
 }
+#endif /* CONFIG_CMD_SF_TEST */
 
 static int do_spi_flash(cmd_tbl_t *cmdtp, int flag, int argc, char * const argv[])
 {
@@ -304,6 +497,10 @@
 		ret = do_spi_flash_read_write(argc, argv);
 	else if (strcmp(cmd, "erase") == 0)
 		ret = do_spi_flash_erase(argc, argv);
+#ifdef CONFIG_CMD_SF_TEST
+	else if (!strcmp(cmd, "test"))
+		ret = do_spi_flash_test(argc, argv);
+#endif
 	else
 		ret = -1;
 
@@ -315,6 +512,13 @@
 	return CMD_RET_USAGE;
 }
 
+#ifdef CONFIG_CMD_SF_TEST
+#define SF_TEST_HELP "\nsf test offset len		" \
+		"- run a very basic destructive test"
+#else
+#define SF_TEST_HELP
+#endif
+
 U_BOOT_CMD(
 	sf,	5,	1,	do_spi_flash,
 	"SPI flash sub-system",
@@ -328,4 +532,5 @@
 	"				  `+len' round up `len' to block size\n"
 	"sf update addr offset len	- erase and write `len' bytes from memory\n"
 	"				  at `addr' to flash at `offset'"
+	SF_TEST_HELP
 );
diff --git a/doc/README.sh7752evb b/doc/README.sh7752evb
new file mode 100644
index 0000000..c1fb54c
--- /dev/null
+++ b/doc/README.sh7752evb
@@ -0,0 +1,67 @@
+========================================
+Renesas R0P7752C00000RZ board
+========================================
+
+This board specification:
+=========================
+
+The R0P7752C00000RZ(board config name:sh7752evb) has the following device:
+
+ - SH7752 (SH-4A)
+ - DDR3-SDRAM 512MB
+ - SPI ROM 8MB
+ - Gigabit Ethernet controllers
+ - eMMC 4GB
+
+
+Configuration for This board:
+=============================
+
+You can select the configuration as follows:
+
+ - make sh7752evb_config
+
+
+This board specific command:
+============================
+
+This board has the following its specific command:
+
+ - write_mac
+
+
+1. write_mac
+
+You can write MAC address to SPI ROM.
+
+ Usage 1) Write MAC address
+
+   write_mac [GETHERC ch0] [GETHERC ch1]
+
+	For example)
+	 => write_mac 74:90:50:00:33:9e 74:90:50:00:33:9f
+		*) We have to input the command as a single line
+		   (without carriage return)
+		*) We have to reset after input the command.
+
+ Usage 2) Show current data
+
+   write_mac
+
+	For example)
+		=> write_mac
+		GETHERC ch0 = 74:90:50:00:33:9e
+		GETHERC ch1 = 74:90:50:00:33:9f
+
+
+Update SPI ROM:
+============================
+
+1. Copy u-boot image to RAM area.
+2. Probe SPI device.
+   => sf probe 0
+   SF: Detected MX25L6405D with page size 64KiB, total 8 MiB
+3. Erase SPI ROM.
+   => sf erase 0 80000
+4. Write u-boot image to SPI ROM.
+   => sf write 0x48000000 0 80000
diff --git a/drivers/mtd/nand/fsl_ifc_nand.c b/drivers/mtd/nand/fsl_ifc_nand.c
index 0878bec..b13d8a9 100644
--- a/drivers/mtd/nand/fsl_ifc_nand.c
+++ b/drivers/mtd/nand/fsl_ifc_nand.c
@@ -391,7 +391,7 @@
 			timing = IFC_FIR_OP_RBCD;
 
 		out_be32(&ifc->ifc_nand.nand_fir0,
-				(IFC_FIR_OP_CMD0 << IFC_NAND_FIR0_OP0_SHIFT) |
+				(IFC_FIR_OP_CW0 << IFC_NAND_FIR0_OP0_SHIFT) |
 				(IFC_FIR_OP_UA  << IFC_NAND_FIR0_OP1_SHIFT) |
 				(timing << IFC_NAND_FIR0_OP2_SHIFT));
 		out_be32(&ifc->ifc_nand.nand_fcr0,
@@ -758,7 +758,7 @@
 
 	/* READID */
 	out_be32(&ifc->ifc_nand.nand_fir0,
-			(IFC_FIR_OP_CMD0 << IFC_NAND_FIR0_OP0_SHIFT) |
+			(IFC_FIR_OP_CW0 << IFC_NAND_FIR0_OP0_SHIFT) |
 			(IFC_FIR_OP_UA  << IFC_NAND_FIR0_OP1_SHIFT) |
 			(IFC_FIR_OP_RB << IFC_NAND_FIR0_OP2_SHIFT));
 	out_be32(&ifc->ifc_nand.nand_fcr0,
diff --git a/drivers/mtd/nand/mxs_nand.c b/drivers/mtd/nand/mxs_nand.c
index 4701be8..e38e151 100644
--- a/drivers/mtd/nand/mxs_nand.c
+++ b/drivers/mtd/nand/mxs_nand.c
@@ -1058,6 +1058,8 @@
 {
 	struct mxs_gpmi_regs *gpmi_regs =
 		(struct mxs_gpmi_regs *)MXS_GPMI_BASE;
+	struct mxs_bch_regs *bch_regs =
+		(struct mxs_bch_regs *)MXS_BCH_BASE;
 	int i = 0, j;
 
 	info->desc = malloc(sizeof(struct mxs_dma_desc *) *
@@ -1081,6 +1083,7 @@
 
 	/* Reset the GPMI block. */
 	mxs_reset_block(&gpmi_regs->hw_gpmi_ctrl0_reg);
+	mxs_reset_block(&bch_regs->hw_bch_ctrl_reg);
 
 	/*
 	 * Choose NAND mode, set IRQ polarity, disable write protection and
diff --git a/drivers/net/e1000.c b/drivers/net/e1000.c
index 2d4da4b..8ba98b2 100644
--- a/drivers/net/e1000.c
+++ b/drivers/net/e1000.c
@@ -1688,6 +1688,16 @@
 		E1000_WRITE_REG(hw, TXDCTL, ctrl);
 	}
 
+	/* Set the receive descriptor write back policy */
+
+	if (hw->mac_type >= e1000_82571) {
+		ctrl = E1000_READ_REG(hw, RXDCTL);
+		ctrl =
+		    (ctrl & ~E1000_RXDCTL_WTHRESH) |
+		    E1000_RXDCTL_FULL_RX_DESC_WB;
+		E1000_WRITE_REG(hw, RXDCTL, ctrl);
+	}
+
 	switch (hw->mac_type) {
 	default:
 		break;
diff --git a/drivers/net/e1000.h b/drivers/net/e1000.h
index fd1d8f8..1bbae50 100644
--- a/drivers/net/e1000.h
+++ b/drivers/net/e1000.h
@@ -1551,6 +1551,7 @@
 #define E1000_RXDCTL_HTHRESH 0x00003F00	/* RXDCTL Host Threshold */
 #define E1000_RXDCTL_WTHRESH 0x003F0000	/* RXDCTL Writeback Threshold */
 #define E1000_RXDCTL_GRAN    0x01000000	/* RXDCTL Granularity */
+#define E1000_RXDCTL_FULL_RX_DESC_WB 0x01010000	/* GRAN=1, WTHRESH=1 */
 
 /* Transmit Descriptor Control */
 #define E1000_TXDCTL_PTHRESH 0x0000003F	/* TXDCTL Prefetch Threshold */
diff --git a/drivers/net/phy/marvell.c b/drivers/net/phy/marvell.c
index e51e799..4b27198 100644
--- a/drivers/net/phy/marvell.c
+++ b/drivers/net/phy/marvell.c
@@ -425,6 +425,16 @@
 	.shutdown = &genphy_shutdown,
 };
 
+static struct phy_driver M88E1118R_driver = {
+	.name = "Marvell 88E1118R",
+	.uid = 0x1410e40,
+	.mask = 0xffffff0,
+	.features = PHY_GBIT_FEATURES,
+	.config = &m88e1118_config,
+	.startup = &m88e1118_startup,
+	.shutdown = &genphy_shutdown,
+};
+
 static struct phy_driver M88E1121R_driver = {
 	.name = "Marvell 88E1121R",
 	.uid = 0x1410cb0,
@@ -461,6 +471,7 @@
 	phy_register(&M88E1145_driver);
 	phy_register(&M88E1121R_driver);
 	phy_register(&M88E1118_driver);
+	phy_register(&M88E1118R_driver);
 	phy_register(&M88E1111S_driver);
 	phy_register(&M88E1011S_driver);
 
diff --git a/drivers/net/sh_eth.c b/drivers/net/sh_eth.c
index 2d9cc32..e6fc8c8 100644
--- a/drivers/net/sh_eth.c
+++ b/drivers/net/sh_eth.c
@@ -417,7 +417,7 @@
 		printf(SHETHER_NAME ": 100Base/");
 #if defined(SH_ETH_TYPE_GETHER)
 		sh_eth_write(eth, GECMR_100B, GECMR);
-#elif defined(CONFIG_CPU_SH7757)
+#elif defined(CONFIG_CPU_SH7757) || defined(CONFIG_CPU_SH7752)
 		sh_eth_write(eth, 1, RTRATE);
 #elif defined(CONFIG_CPU_SH7724)
 		val = ECMR_RTM;
@@ -426,7 +426,7 @@
 		printf(SHETHER_NAME ": 10Base/");
 #if defined(SH_ETH_TYPE_GETHER)
 		sh_eth_write(eth, GECMR_10B, GECMR);
-#elif defined(CONFIG_CPU_SH7757)
+#elif defined(CONFIG_CPU_SH7757) || defined(CONFIG_CPU_SH7752)
 		sh_eth_write(eth, 0, RTRATE);
 #endif
 	}
diff --git a/drivers/net/sh_eth.h b/drivers/net/sh_eth.h
index 61d2df9..568fafe 100644
--- a/drivers/net/sh_eth.h
+++ b/drivers/net/sh_eth.h
@@ -288,7 +288,7 @@
 #if defined(CONFIG_CPU_SH7763) || defined(CONFIG_CPU_SH7734)
 #define SH_ETH_TYPE_GETHER
 #define BASE_IO_ADDR	0xfee00000
-#elif defined(CONFIG_CPU_SH7757)
+#elif defined(CONFIG_CPU_SH7757) || defined(CONFIG_CPU_SH7752)
 #if defined(CONFIG_SH_ETHER_USE_GETHER)
 #define SH_ETH_TYPE_GETHER
 #define BASE_IO_ADDR	0xfee00000
@@ -346,7 +346,7 @@
 
 /* GECMR */
 enum GECMR_BIT {
-#if defined(CONFIG_CPU_SH7757)
+#if defined(CONFIG_CPU_SH7757) || defined(CONFIG_CPU_SH7752)
 	GECMR_1000B = 0x20, GECMR_100B = 0x01, GECMR_10B = 0x00,
 #else
 	GECMR_1000B = 0x01, GECMR_100B = 0x04, GECMR_10B = 0x00,
diff --git a/drivers/serial/serial_sh.h b/drivers/serial/serial_sh.h
index a33334e..7e38a3f 100644
--- a/drivers/serial/serial_sh.h
+++ b/drivers/serial/serial_sh.h
@@ -143,7 +143,7 @@
 #elif defined(CONFIG_H8S2678)
 # define SCSCR_INIT(port)          0x30 /* TIE=0,RIE=0,TE=1,RE=1 */
 # define H8300_SCI_DR(ch) (*(volatile char *)(P1DR + h8300_sci_pins[ch].port))
-#elif defined(CONFIG_CPU_SH7757)
+#elif defined(CONFIG_CPU_SH7757) || defined(CONFIG_CPU_SH7752)
 # define SCSPTR0 0xfe4b0020
 # define SCSPTR1 0xfe4b0020
 # define SCSPTR2 0xfe4b0020
diff --git a/include/configs/CRAYL1.h b/include/configs/CRAYL1.h
index 1daec69..6bceccb 100644
--- a/include/configs/CRAYL1.h
+++ b/include/configs/CRAYL1.h
@@ -153,7 +153,6 @@
 
 
 #define CONFIG_SYS_LOAD_ADDR		0x100000	/* where to load what we get from TFTP */
-#define CONFIG_SYS_TFTP_LOADADDR	CONFIG_SYS_LOAD_ADDR
 #define CONFIG_SYS_EXTBDINFO		1		/* To use extended board_into (bd_t) */
 #define CONFIG_SYS_DRAM_TEST		1
 
diff --git a/include/configs/GEN860T.h b/include/configs/GEN860T.h
index b98cacc..9a649ca 100644
--- a/include/configs/GEN860T.h
+++ b/include/configs/GEN860T.h
@@ -96,11 +96,6 @@
 #define	CONFIG_SYS_LOADS_BAUD_CHANGE
 
 /*
- * Set default load address for tftp network downloads
- */
-#define	CONFIG_SYS_TFTP_LOADADDR				0x01000000
-
-/*
  * Turn off the watchdog timer
  */
 #undef	CONFIG_WATCHDOG
diff --git a/include/configs/TOP860.h b/include/configs/TOP860.h
index 36921ca..4849f94 100644
--- a/include/configs/TOP860.h
+++ b/include/configs/TOP860.h
@@ -416,7 +416,6 @@
 #define CONFIG_IPADDR					10.0.4.111
 
 #define CONFIG_SYS_LOAD_ADDR		0x00100000	/* default load address */
-#define	CONFIG_SYS_TFTP_LOADADDR	0x00100000
 
 /*
  * For booting Linux, the board info and command line data
diff --git a/include/configs/eb_cpu5282.h b/include/configs/eb_cpu5282.h
index 5a0d321..459f568 100644
--- a/include/configs/eb_cpu5282.h
+++ b/include/configs/eb_cpu5282.h
@@ -168,14 +168,6 @@
 #define CONFIG_SYS_SDRAM_BASE		CONFIG_SYS_SDRAM_BASE0
 #define	CONFIG_SYS_SDRAM_SIZE		CONFIG_SYS_SDRAM_SIZE0
 
-/* If M5282 port is fully implemented the monitor base will be behind
- * the vector table. */
-#if (CONFIG_SYS_TEXT_BASE !=  CONFIG_SYS_INT_FLASH_BASE)
-#define CONFIG_SYS_MONITOR_BASE	(CONFIG_SYS_TEXT_BASE + 0x400)
-#else
-#define CONFIG_SYS_MONITOR_BASE	(CONFIG_SYS_TEXT_BASE + 0x418) /* 24 Byte for CFM-Config */
-#endif
-
 #define CONFIG_SYS_MONITOR_LEN		0x20000
 #define CONFIG_SYS_MALLOC_LEN		(256 << 10)
 #define CONFIG_SYS_BOOTPARAMS_LEN	64*1024
diff --git a/include/configs/ep8260.h b/include/configs/ep8260.h
index ccfe032..5a87cc5 100644
--- a/include/configs/ep8260.h
+++ b/include/configs/ep8260.h
@@ -371,7 +371,6 @@
 #define	CONFIG_CLOCKS_IN_MHZ	1      /* clocks passsed to Linux in MHz */
 
 #define CONFIG_SYS_LOAD_ADDR     0x00100000   /* default load address */
-#define CONFIG_SYS_TFTP_LOADADDR 0x00100000   /* default load address for network file downloads */
 
 #define CONFIG_SYS_HZ            1000         /* decrementer freq: 1 ms ticks */
 
diff --git a/include/configs/m28evk.h b/include/configs/m28evk.h
index b49ec8c..3f37e84 100644
--- a/include/configs/m28evk.h
+++ b/include/configs/m28evk.h
@@ -297,7 +297,7 @@
 		"if tftp ${update_nand_full_filename} ; then "		\
 		"run update_nand_get_fcb_size ; "			\
 		"nand scrub -y 0x0 ${filesize} ; "			\
-		"nand write.raw ${loadaddr} 0x0 ${update_nand_fcb} ; "	\
+		"nand write.raw ${loadaddr} 0x0 ${fcb_sz} ; "	\
 		"setexpr update_off ${loadaddr} + ${update_nand_fcb} ; " \
 		"setexpr update_sz ${filesize} - ${update_nand_fcb} ; " \
 		"nand write ${update_off} ${update_nand_fcb} ${update_sz} ; " \
diff --git a/include/configs/mx28evk.h b/include/configs/mx28evk.h
index 2916c71..3d4a601 100644
--- a/include/configs/mx28evk.h
+++ b/include/configs/mx28evk.h
@@ -263,7 +263,7 @@
 		"if tftp ${update_nand_full_filename} ; then " \
 		"run update_nand_get_fcb_size ; " \
 		"nand scrub -y 0x0 ${filesize} ; " \
-		"nand write.raw ${loadaddr} 0x0 ${update_nand_fcb} ; " \
+		"nand write.raw ${loadaddr} 0x0 ${fcb_sz} ; " \
 		"setexpr update_off ${loadaddr} + ${update_nand_fcb} ; " \
 		"setexpr update_sz ${filesize} - ${update_nand_fcb} ; " \
 		"nand write ${update_off} ${update_nand_fcb} ${update_sz} ; " \
diff --git a/include/configs/sh7752evb.h b/include/configs/sh7752evb.h
new file mode 100644
index 0000000..bf6bd4d
--- /dev/null
+++ b/include/configs/sh7752evb.h
@@ -0,0 +1,153 @@
+/*
+ * Configuation settings for the sh7752evb board
+ *
+ * Copyright (C) 2012 Renesas Solutions Corp.
+ *
+ * See file CREDITS for list of people who contributed to this
+ * project.
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of
+ * the License, or (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
+ * MA 02111-1307 USA
+ */
+
+#ifndef __SH7752EVB_H
+#define __SH7752EVB_H
+
+#undef DEBUG
+#define CONFIG_SH		1
+#define CONFIG_SH4A		1
+#define CONFIG_SH_32BIT		1
+#define CONFIG_CPU_SH7752	1
+#define CONFIG_SH7752EVB	1
+
+#define CONFIG_SYS_TEXT_BASE	0x5ff80000
+#define CONFIG_SYS_LDSCRIPT	"board/renesas/sh7752evb/u-boot.lds"
+
+#define CONFIG_CMD_MEMORY
+#define CONFIG_CMD_NET
+#define CONFIG_CMD_MII
+#define CONFIG_CMD_PING
+#define CONFIG_CMD_NFS
+#define CONFIG_CMD_DFL
+#define CONFIG_CMD_SDRAM
+#define CONFIG_CMD_SF
+#define CONFIG_CMD_RUN
+#define CONFIG_CMD_SAVEENV
+#define CONFIG_CMD_MD5SUM
+#define CONFIG_MD5
+#define CONFIG_CMD_LOADS
+#define CONFIG_CMD_MMC
+#define CONFIG_CMD_EXT2
+#define CONFIG_DOS_PARTITION
+#define CONFIG_MAC_PARTITION
+
+#define CONFIG_BAUDRATE		115200
+#define CONFIG_BOOTDELAY	3
+#define CONFIG_BOOTARGS		"console=ttySC2,115200 root=/dev/nfs ip=dhcp"
+
+#define CONFIG_VERSION_VARIABLE
+#undef	CONFIG_SHOW_BOOT_PROGRESS
+#define CONFIG_CMDLINE_EDITING
+#define CONFIG_AUTO_COMPLETE
+
+/* MEMORY */
+#define SH7752EVB_SDRAM_BASE		(0x40000000)
+#define SH7752EVB_SDRAM_SIZE		(512 * 1024 * 1024)
+
+#define CONFIG_SYS_LONGHELP
+#define CONFIG_SYS_PROMPT		"=> "
+#define CONFIG_SYS_CBSIZE		256
+#define CONFIG_SYS_PBSIZE		256
+#define CONFIG_SYS_MAXARGS		16
+#define CONFIG_SYS_BARGSIZE		512
+#define CONFIG_SYS_BAUDRATE_TABLE	{ 115200 }
+
+/* SCIF */
+#define CONFIG_SCIF_CONSOLE	1
+#define CONFIG_CONS_SCIF2	1
+#undef	CONFIG_SYS_CONSOLE_INFO_QUIET
+#undef	CONFIG_SYS_CONSOLE_OVERWRITE_ROUTINE
+#undef	CONFIG_SYS_CONSOLE_ENV_OVERWRITE
+
+#define CONFIG_SYS_MEMTEST_START	(SH7752EVB_SDRAM_BASE)
+#define CONFIG_SYS_MEMTEST_END		(CONFIG_SYS_MEMTEST_START + \
+					 480 * 1024 * 1024)
+#undef	CONFIG_SYS_ALT_MEMTEST
+#undef	CONFIG_SYS_MEMTEST_SCRATCH
+#undef	CONFIG_SYS_LOADS_BAUD_CHANGE
+
+#define CONFIG_SYS_SDRAM_BASE		(SH7752EVB_SDRAM_BASE)
+#define CONFIG_SYS_SDRAM_SIZE		(SH7752EVB_SDRAM_SIZE)
+#define CONFIG_SYS_LOAD_ADDR		(CONFIG_SYS_SDRAM_BASE + \
+					 128 * 1024 * 1024)
+
+#define CONFIG_SYS_MONITOR_BASE		0x00000000
+#define CONFIG_SYS_MONITOR_LEN		(512 * 1024)
+#define CONFIG_SYS_MALLOC_LEN		(4 * 1024 * 1024)
+#define CONFIG_SYS_BOOTMAPSZ		(8 * 1024 * 1024)
+
+/* FLASH */
+#define CONFIG_SYS_NO_FLASH
+
+/* Ether */
+#define CONFIG_SH_ETHER			1
+#define CONFIG_SH_ETHER_USE_PORT	0
+#define CONFIG_SH_ETHER_PHY_ADDR	18
+#define CONFIG_SH_ETHER_CACHE_WRITEBACK	1
+#define CONFIG_SH_ETHER_USE_GETHER	1
+#define CONFIG_PHYLIB
+#define CONFIG_BITBANGMII
+#define CONFIG_BITBANGMII_MULTI
+#define CONFIG_SH_ETHER_PHY_MODE PHY_INTERFACE_MODE_RGMII
+#define CONFIG_PHY_VITESSE
+
+#define SH7752EVB_ETHERNET_MAC_BASE_SPI	0x00090000
+#define SH7752EVB_SPI_SECTOR_SIZE	(64 * 1024)
+#define SH7752EVB_ETHERNET_MAC_BASE	SH7752EVB_ETHERNET_MAC_BASE_SPI
+#define SH7752EVB_ETHERNET_MAC_SIZE	17
+#define SH7752EVB_ETHERNET_NUM_CH	2
+#define CONFIG_BOARD_LATE_INIT
+
+/* SPI */
+#define CONFIG_SH_SPI			1
+#define CONFIG_SH_SPI_BASE		0xfe002000
+#define CONFIG_SPI_FLASH
+#define CONFIG_SPI_FLASH_STMICRO	1
+#define CONFIG_SPI_FLASH_MACRONIX	1
+
+/* MMCIF */
+#define CONFIG_MMC			1
+#define CONFIG_GENERIC_MMC		1
+#define CONFIG_SH_MMCIF			1
+#define CONFIG_SH_MMCIF_ADDR		0xffcb0000
+#define CONFIG_SH_MMCIF_CLK		48000000
+
+/* ENV setting */
+#define CONFIG_ENV_IS_EMBEDDED
+#define CONFIG_ENV_IS_IN_SPI_FLASH
+#define CONFIG_ENV_SECT_SIZE	(64 * 1024)
+#define CONFIG_ENV_ADDR		(0x00080000)
+#define CONFIG_ENV_OFFSET	(CONFIG_ENV_ADDR)
+#define CONFIG_ENV_OVERWRITE	1
+#define CONFIG_ENV_SIZE		(CONFIG_ENV_SECT_SIZE)
+#define CONFIG_ENV_SIZE_REDUND	(CONFIG_ENV_SECT_SIZE)
+#define CONFIG_EXTRA_ENV_SETTINGS				\
+		"netboot=bootp; bootm\0"
+
+/* Board Clock */
+#define CONFIG_SYS_CLK_FREQ	48000000
+#define CONFIG_SYS_TMU_CLK_DIV	4
+#define CONFIG_SYS_HZ		1000
+#endif	/* __SH7752EVB_H */
diff --git a/include/configs/utx8245.h b/include/configs/utx8245.h
index d203bb4..66568c8 100644
--- a/include/configs/utx8245.h
+++ b/include/configs/utx8245.h
@@ -65,7 +65,6 @@
 #define CONFIG_BOOTARGS		"root=/dev/ram console=ttyS0,57600" /* RAMdisk */
 #define CONFIG_ETHADDR		00:AA:00:14:00:05	/* UTX5 */
 #define CONFIG_SERVERIP		10.8.17.105	/* Spree */
-#define CONFIG_SYS_TFTP_LOADADDR	10000
 
 #define CONFIG_EXTRA_ENV_SETTINGS \
 	"kernel_addr=FFA00000\0" \
diff --git a/net/link_local.c b/net/link_local.c
index d52f13a..1ba796e 100644
--- a/net/link_local.c
+++ b/net/link_local.c
@@ -103,7 +103,7 @@
 void link_local_start(void)
 {
 	ip = getenv_IPaddr("llipaddr");
-	if (ip != 0 && (ip & IN_CLASSB_NET) != LINKLOCAL_ADDR) {
+	if (ip != 0 && (ntohl(ip) & IN_CLASSB_NET) != LINKLOCAL_ADDR) {
 		puts("invalid link address");
 		net_set_state(NETLOOP_FAIL);
 		return;
diff --git a/net/tftp.c b/net/tftp.c
index 59a8ebb..09790eb 100644
--- a/net/tftp.c
+++ b/net/tftp.c
@@ -40,6 +40,7 @@
 
 static ulong TftpTimeoutMSecs = TIMEOUT;
 static int TftpTimeoutCountMax = TIMEOUT_COUNT;
+static ulong time_start;   /* Record time we started tftp */
 
 /*
  * These globals govern the timeout behavior when attempting a connection to a
@@ -299,6 +300,12 @@
 		TftpNumchars++;
 	}
 #endif
+	time_start = get_timer(time_start);
+	if (time_start > 0) {
+		puts("\n\t ");	/* Line up with "Loading: " */
+		print_size(NetBootFileXferSize /
+			time_start * 1000, "/s");
+	}
 	puts("\ndone\n");
 	net_set_state(NETLOOP_SUCCESS);
 }
@@ -775,6 +782,7 @@
 		TftpState = STATE_SEND_RRQ;
 	}
 
+	time_start = get_timer(0);
 	TftpTimeoutCountMax = TftpRRQTimeoutCountMax;
 
 	NetSetTimeout(TftpTimeoutMSecs, TftpTimeout);
diff --git a/tools/env/fw_env.c b/tools/env/fw_env.c
index 90c7a5d..37b60b80 100644
--- a/tools/env/fw_env.c
+++ b/tools/env/fw_env.c
@@ -429,7 +429,8 @@
  */
 int fw_setenv(int argc, char *argv[])
 {
-	int i, len;
+	int i;
+	size_t len;
 	char *name;
 	char *value = NULL;
 
diff --git a/tools/env/fw_env_main.c b/tools/env/fw_env_main.c
index c855f4c..40ea3f6 100644
--- a/tools/env/fw_env_main.c
+++ b/tools/env/fw_env_main.c
@@ -94,7 +94,7 @@
 	int lockfd = -1;
 	int retval = EXIT_SUCCESS;
 
-	lockfd = open(lockname, O_WRONLY | O_CREAT | O_TRUNC);
+	lockfd = open(lockname, O_WRONLY | O_CREAT | O_TRUNC, 0666);
 	if (-1 == lockfd) {
 		fprintf(stderr, "Error opening lock file %s\n", lockname);
 		return EXIT_FAILURE;